diff --git a/GPS-RTC-Clock.ino b/GPS-RTC-Clock.ino
index ceb8541..8fb6582 100644
--- a/GPS-RTC-Clock.ino
+++ b/GPS-RTC-Clock.ino
@@ -656,7 +656,6 @@ void setRTC_Date(int yyyy, byte mo, byte dd) {
 
 void RunStateMachine() {
   byte temp_buffer;
-  //135Serial.println("R-SM");
   
   switch (StateMachine) {
 
@@ -674,8 +673,7 @@ void RunStateMachine() {
           Serial.println("No PPS detected.");
         }
         break; //end DEBUG case
-
-        
+  
  // ------------------------------    
 
     case BOOTUP:
@@ -701,15 +699,13 @@ void RunStateMachine() {
  // ------------------------------    
         
     case REG_OPS:
-        //135Serial.println("REG_OPS");
-   
         displayRTC();  //keep the trains running
 
         //if (mmRTC == 40 && ssRTC == 0) {  //every hour at minute 15, do a GPS_INIT check to prep for GPS-to-RTC time update
         if (mmRTC != 0 && ssRTC == 0) {
           GPS_INIT_t0 = millis(); //sets our timer to allow a timeout in the next state
           getRTC();
-          serialRTC_timeOnMax(ddRTC,moRTC,yyRTC);
+          serialRTC_timeOnMax(hhRTC,mmRTC,ssRTC);
           Serial.println(">GPS_INIT");
           StateMachine = GPS_INIT; // >>>> State Change! <<<<//
           break;
@@ -768,12 +764,11 @@ void RunStateMachine() {
  // ------------------------------   
         
     case GPS_INIT:
-        Serial.println("GPS_INIT");
         displayRTC();  // keeps the trains running on the display!
      
        if (PPS_detect()) {  //means PPS is detected on the GPS unit
-       getRTC();
-         serialRTC_timeOnMax(ddRTC,moRTC,yyRTC);
+         getRTC();
+         serialRTC_timeOnMax(hhRTC,mmRTC,ssRTC);
          Serial.println(">GPS_PPS_SYNC");
          StateMachine = GPS_PPS_SYNC; // >>>> State Change! <<<<//
          clearGPSInputBuffer(); //purges old GPS data in GPS UART buffer 
@@ -782,7 +777,7 @@ void RunStateMachine() {
         
         if (millis() - GPS_INIT_t0 > 4000) {  //timeout this state after 4 secs if no PPS detected
           getRTC();
-          serialRTC_timeOnMax(ddRTC,moRTC,yyRTC);
+          serialRTC_timeOnMax(hhRTC,mmRTC,ssRTC);
           Serial.println(">GPS_NMEA_SYNC");
           StateMachine = GPS_NMEA_SYNC; // >>>> State Change! <<<<//
           clearGPSInputBuffer(); //purges old GPS data in GPS UART buffer
@@ -821,7 +816,7 @@ void RunStateMachine() {
           newGPS_dateAvail = false; //this completed the date and time update.
           PPS_done = false;
           getRTC();
-          serialRTC_timeOnMax(ddRTC,moRTC,yyRTC);
+          serialRTC_timeOnMax(hhRTC,mmRTC,ssRTC);
           Serial.println(">REG_OPS");
           StateMachine = REG_OPS; // >>>> State Change! <<<<//
           break;
@@ -846,7 +841,7 @@ void RunStateMachine() {
 
         if (millis() - GPS_INIT_t0 > 14000) {  //timeout this state after 10 secs if no PPS detected
             getRTC();
-            serialRTC_timeOnMax(ddRTC,moRTC,yyRTC);
+            serialRTC_timeOnMax(hhRTC,mmRTC,ssRTC);
             Serial.println(">REG_OPS");
             StateMachine = REG_OPS; // >>>> State Change! <<<<//
         }
@@ -889,7 +884,7 @@ void RunStateMachine() {
 
         if (millis() - GPS_INIT_t0 > 14000) {  //timeout this state after 10 secs if no PPS detected
             getRTC();
-            serialRTC_timeOnMax(ddRTC,moRTC,yyRTC);
+            serialRTC_timeOnMax(hhRTC,mmRTC,ssRTC);
             Serial.println(">REG_OPS");
             StateMachine = REG_OPS; // >>>> State Change! <<<<//
         }
@@ -904,7 +899,7 @@ void RunStateMachine() {
 void setup() {
   // put your setup code here, to run once:
   // 135
-  lcd.init();                      // Инициализация дисплея
+  lcd.init();  // Инициализация дисплея
   lcd.clear();
   lcd.backlight();   
 
@@ -918,25 +913,24 @@ void setup() {
       
   //initializeMax7219();  //sets all startup parameters for Max7219 chip
 
-  delay(100);
+  //delay(100);
   
   pinMode(RTC_SQW_Pin, INPUT_PULLUP); // SQW is open drain on DS3231, so need internal pullup enabled.
   pinMode(GPS_PPS_Pin, INPUT);
-  pinMode(ir_pin, INPUT_PULLUP);
+  //pinMode(ir_pin, INPUT_PULLUP);
   
   Wire.setClock(400000);  //i2C 100kHz typical. 400kHz fast mode. DS3231 RTC supports fast mode.
   delay(100); //more stabilizing
   
-  Serial.begin(9600);  // for the GPS unit. Later set to Serial when debugging done.
-  GPS.begin(9600);
+  Serial.begin(115200);  // for the GPS unit. Later set to Serial when debugging done.
+  GPS.begin(115200);
   delay(100); //more stabilizing
   Serial.println("setup().");
   
-  attachInterrupt (digitalPinToInterrupt(ir_pin), ISR_pulse_detected, CHANGE);
+  //attachInterrupt (digitalPinToInterrupt(ir_pin), ISR_pulse_detected, CHANGE);
 
   //clearGPSInputBuffer();
 
-  
   StateMachine = BOOTUP;  //set the initial state
 
 }