WIP

адаптация. в Serial выводятся PPS/SQW и на LCD печатается время

GPS_RTC_Clock.ino

@@ -0,0 +1,132 @@
+/* GPS_RTC_Clock
+
+  MIT License
+  Copyright (c) 2023 hdrlux
+
+  https://www.instructables.com/01-Sec-Accurate-RTC-GPS-Wall-Clock-Arduino-96x8-LE/
+  https://github.com/hdrlux/GPS_RTC_Clock
+*/
+
+#include <Arduino.h>  // needed for Nano Every
+#include "GPS_RTC_Clock.h"
+#include "LED_96x8_matrix.h"
+#include <DMD2.h>
+#include <LiquidCrystal_I2C.h>
+#include "Font_Chrono1.h"
+
+#define pin_RTC_SQW 3;
+
+SoftDMD dmd(2, 1);
+LiquidCrystal_I2C lcd(0x27, 16, 2);
+
+unsigned long tmr_Blink;
+
+char TempBuf[5] = "99.9";  // demo value
+char HumiBuf[3] = "99";    // demo value
+
+void setup() {                         // the setup function runs once when you press reset or power the board
+  GPS_RTC_Clock_setup();               // first in setup
+  //Matrix_setup();                      // LED display
+  dmd.setBrightness(5);
+  dmd.selectFont(Font_Chrono1);
+  dmd.begin();
+  dmd.clearScreen();
+  // LCD
+  lcd.init();  // Инициализация дисплея
+  lcd.clear();
+  lcd.backlight();
+
+  Serial.begin(19200);                  // = 9600, must be same as GPS for debug
+  Serial.println();                    // flush serial
+  Serial.println("-Arduino Reboot-");  // debug
+}
+
+void loop() {            // the loop function runs over and over again forever
+//  if (millis() - tmr_Blink > 500) {
+//    Serial.println("DEBUG[BLINK] " + int(digitalRead(13)));
+//    tmr_Blink = millis();
+//    digitalWrite(13, !digitalRead(13));
+//  }
+
+  GPS_RTC_Clock_loop();  // first in loop
+  //PrintSec();
+  //PrintHour();
+  if (NewSec) {
+    RTCtoLCD();
+  }
+}
+
+void RTCtoLCD() {
+    char sz[32];
+    sprintf(sz, "%02d:%02d:%02d ", hour(Loc_t), minute(Loc_t), second(Loc_t));
+    lcd.setCursor(0,0);
+    lcd.print(sz);
+}
+
+void PrintSec() {    // print time if new second
+  if (NewSec) {      //
+    NewSec = false;  // remove flag,  do only once every sec
+    char startmarker = '<';
+    char endmarker = '>';
+    Serial.print(startmarker);  // for remote display via RS485
+    Serial.print(Loc_t);        // for remote display via RS485
+    Serial.println(endmarker);  // for remote display via RS485
+
+    char TimeBuf[9];                                      // time string buffer, max n-1  char
+    snprintf(TimeBuf, sizeof(TimeBuf), "%.2u:%.2u:%.2u",  // https://cplusplus.com/reference/cstdio/printf/
+             hour(Loc_t), minute(Loc_t), second(Loc_t));  // time 24h format
+    Serial.print("Time: ");                               // debug
+    Serial.println(TimeBuf);                              // debug
+    Print_time_zone(TimeBuf);                             // print to LED Matrix
+    PrintMin();
+  }
+}
+
+void PrintMin() {
+  char TextBuf[12];     // date string buffer, max n-1  char
+  if (!DIP_Scroll()) {  // print date only or 'scrolling' text
+    snprintf(TextBuf, sizeof(TextBuf), "%s %.2u %s",
+             dayShortStrLoc(weekday(Loc_t)), day(Loc_t), monthShortStrLoc(month(Loc_t)));  // weekday, day, month
+  } else {                                                                                 // print 'scrolling'
+    /*** HowTo ******************************************************************
+    print different info every few seconds, because of limited display space
+    define the amount of different text lines, must be at least 1
+    define the amount of seconds each textline is displayed, must be at least 1
+    define each text line, this may be duplicates of other text lines
+    *****************************************************************************/
+    byte text_lines = 3;                                         // amount of different text lines printed
+    byte text_timer = 5;                                         // amount of seconds to next text
+    byte text_counter(((Loc_t / text_timer) % text_lines) + 1);  // range = 1..n
+    if (text_counter == 1) {
+      snprintf(TextBuf, sizeof(TextBuf), "%.2u%s%u",
+               day(Loc_t), monthShortStrLoc(month(Loc_t)), year(Loc_t));  // day, month, year
+    } else if (text_counter == 2) {
+      snprintf(TextBuf, sizeof(TextBuf), "%s W%.2u",
+               dayShortStrLoc(weekday(Loc_t)), ISOWeekNumber(Loc_t));  // weekday, week
+    } else if (text_counter == 3) {
+      snprintf(TextBuf, sizeof(TextBuf), "%s*C %s%%", TempBuf, HumiBuf);  // * = ° degrees char in fontClock
+    } else {
+      snprintf(TextBuf, sizeof(TextBuf), " Err ");
+    }
+  }
+  Print_date_zone(TextBuf);  // print to LED Matrix
+
+  if (NewMin) {        // print date if new minute
+    NewMin = false;    // remove flag, do only once every min
+    char DateBuf[21];  // date string buffer, max n-1  char
+    // long date version
+    snprintf(DateBuf, sizeof(DateBuf), "%s %.2u-%s-%u W%.2u",
+             dayShortStrLoc(weekday(Loc_t)), day(Loc_t), monthShortStrLoc(month(Loc_t)), year(Loc_t), ISOWeekNumber(Loc_t));
+    Serial.print("Date long: ");  // debug
+    Serial.println(DateBuf);      // debug
+  }
+}
+
+void PrintHour() {                               // do if new hour
+  if (NewHour) {                                 //
+    NewHour = false;                             // remove flag, do only once every hour
+    Serial.println("bring out the Cuckoo ;-)");  // debug
+  }
+}
+
+//End