POD updates - spell check

Info.pm

@@ -350,7 +350,7 @@ See documentation in L<SNMP::Info::FDP> for details.
 =item SNMP::Info::IPv6
 
 SNMP Interface for obtaining configured IPv6 addresses and mapping IPv6
-addresses to MACs and interfaces, using information from F<IP-MIB>,
+addresses to MAC addresses and interfaces, using information from F<IP-MIB>,
 F<IPV6-MIB> and/or F<CISCO-IETF-IP-MIB>.
 
 See documentation in L<SNMP::Info::IPv6> for details.
@@ -727,6 +727,12 @@ Subclass for Brocade (Foundry) Network devices.
 
 See documentation in L<SNMP::Info::Layer3::Foundry> for details.
 
+=item SNMP::Info::Layer3::H3C
+
+SNMP Interface to Layer 3 Devices, H3C & HP A-series.
+
+See documentation in L<SNMP::Info::Layer3::H3C> for details.
+
 =item SNMP::Info::Layer3::HP9300
 
 Subclass for HP network devices which Foundry Networks was the
@@ -880,7 +886,7 @@ Creates a new object and connects via SNMP::Session.
                             'BigInt'            => 1,
                             'BulkWalk'          => 1,
                             'BulkRepeaters'     => 20,
-                            'IgnoreNetSNMPConf => 1,
+                            'IgnoreNetSNMPConf' => 1,
                             'LoopDetect'        => 1,
                             'DestHost'          => 'myrouter',
                             'Community'         => 'public',
@@ -938,9 +944,9 @@ snmp.local.conf, from /etc/snmp, /usr/share/snmp, /usr/lib(64)/snmp, or
 $HOME/.snmp and uses those settings to automatically parse MIB files, etc.
 
 Set to C<1> "on" to ignore Net-SNMP configuration files by overriding the
-C<SNMPCONFPATH> environmental varible during object initialization. Note:
+C<SNMPCONFPATH> environmental variable during object initialization. Note:
-MibDirs must be defined or Net-SNMP will not be able to load MIB's and
+MibDirs must be defined or Net-SNMP will not be able to load MIBs and
-initalize the object.
+initialize the object.
 
 (default 0, which means "off")
 
@@ -2343,7 +2349,7 @@ For protocol specific information and implementation:
 
 =back
 
-=head3 Topology Capabilties
+=head3 Topology Capabilities
 
 =over
 
@@ -3275,7 +3281,7 @@ sub init {
     # Get MibDirs if provided
     my $mibdirs = $self->{mibdirs} || [];
     
-    # SNMP::initMib and SNMP::addMibDirs both look for some inital MIBs
+    # SNMP::initMib and SNMP::addMibDirs both look for some initial MIBs
     # so if we are not using Net-SNMP configuration files we need to
     # specify where the MIBs are before those calls.
 
@@ -4207,13 +4213,13 @@ sub _validate_autoload_method {
 
 =item $info->can()
 
-Overrides UNIVERSAL::can() so that objects will correctly report thier
+Overrides UNIVERSAL::can() so that objects will correctly report their
 capabilities to include dynamic methods generated at run time via AUTOLOAD.
 
 Calls parent can() first to see if method exists, if not validates that a
 method should be created then dispatches to the appropriate internal method
 for creation.  The newly created method is inserted into the symbol table
-returning to AUTOLOAD only for the inital method call.
+returning to AUTOLOAD only for the initial method call.
 
 Returns undef if the method does not exist and can not be created.
 

Info/AdslLine.pm

@@ -65,7 +65,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::AdslLine - SNMP Interface to the ADSL-LINE-MIB
+SNMP::Info::AdslLine - SNMP Interface to the F<ADSL-LINE-MIB>
 
 =head1 AUTHOR
 
@@ -120,7 +120,7 @@ MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
 =head2 ATUC channel table (C<adslAtucChanTable>)
 
 This table provides one row for each ATUC channel.
-ADSL channel interfaces are those ifEntries where ifType
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
 is equal to adslInterleave(124) or adslFast(125).
 
 =over
@@ -146,7 +146,7 @@ is equal to adslInterleave(124) or adslFast(125).
 =head2 ATUR channel table (C<adslAturChanTable>)
 
 This table provides one row for each ATUR channel.
-ADSL channel interfaces are those ifEntries where ifType
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
 is equal to adslInterleave(124) or adslFast(125).
 
 =over

Info/CiscoPower.pm

@@ -175,7 +175,7 @@ Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 =item $poe->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("cpeExtPsePortPwrConsumption")
+(C<cpeExtPsePortPwrConsumption>)
  
 =back
 
@@ -185,8 +185,8 @@ Power supplied by PoE ports, in milliwatts
 
 =item $poe->peth_port_neg_power()
 
-Power negotiated using CDP, in milliwats
+Power negotiated using CDP, in milliwatts
-("cdpCachePowerConsumption")
+(C<cdpCachePowerConsumption>)
 
 =back
 

Info/CiscoStats.pm

@@ -402,62 +402,25 @@ Returns mem_free() + mem_used()
 
 =item $ciscostats->os()
 
-Tries to parse if device is running IOS, CatOS, IOS-XE or something else from description()
+Tries to parse if device is running 'IOS', 'CatOS', 'IOS-XE' or something else
+from description()
 
 Available values:
 
-=over
+ 'ios'          for Cisco IOS
-
+ 'ios-xe'       for Cisco IOS XE
-=item ios
+ 'pix'          for Cisco PIX
-
+ 'asa'          for Cisco ASA
-Cisco IOS
+ 'fwsm'         for Single-mode FWSM
-
+ 'fwsm-admin'   for Admin context of multi-context FWSM
-=item ios-xe
+ 'fwsm-context' for Standard context of multi-context FWSM
-
+ 'ace-admin'    for Admin context of ACE module
-Cisco IOS XE
+ 'ace-context'  for Standard context of ACE module (NB: No OS version
-
+                     detection is available, but will be the same as it's
-=item pix
+                     'ace admin')
-
+ 'css'          for Cisco Content Switch
-Cisco PIX
+ 'css-sca'      for Cisco Content Switch Secure Content Acceleration
-
+ 'san-os'       for Cisco SAN-OS
-=item asa
-
-Cisco ASA
-
-=item fwsm
-
-Single-mode FWSM
-
-=item fwsm-admin
-
-Admin context of multi-context FWSM
-
-=item fwsm-context
-
-Standard context of multi-context FWSM
-
-=item ace-admin
-
-Admin context of ACE module
-
-=item ace-context
-
-Standard context of ACE module (NB: No OS version detection
-is available, but will be the same as it's 'ace admin')
-
-=item css
-
-Cisco Content Switch
-
-=item css-sca
-
-Cisco Content Switch Secure Content Acceleration
-
-=item san-os
-
-Cisco SAN-OS
-
-=back
 
 =item $ciscostats->os_ver()
 
@@ -466,7 +429,7 @@ to parsing C<CISCO-IMAGE-MIB::ciscoImageString> if needed
 
 =item $ciscostats->os_bin()
 
-Tries to parse ROMMON version from rom_id() string
+Tries to parse C<ROMMON> version from rom_id() string
 
 =item $ciscostats->ios_cpu()
 

Info/IPv6.pm

@@ -394,8 +394,9 @@ Jeroen van Ingen and Carlos Vicente
 =head1 DESCRIPTION
 
 The SNMP::Info::IPv6 class implements functions to for mapping IPv6 addresses 
-to MAC addresses, interfaces and more. It will use data from the IP-MIB, IPV6-MIB 
+to MAC addresses, interfaces and more. It will use data from the F<IP-MIB>,
-or the CISCO-IETF-IP-MIB, whichever is supported by the device.
+F<IPV6-MIB>, or the F<CISCO-IETF-IP-MIB>, whichever is supported by the
+device.
 
 This class is inherited by Info::Layer3 to provide IPv6 node tracking across  
 device classes.

Info/Layer2/HP.pm

@@ -776,12 +776,12 @@ Power supply 2 status
 =item $hp->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("hpicfPoePethPsePortPower")
+(C<hpicfPoePethPsePortPower>)
 
 =item $hp->stp_ver()
 
 Returns what version of STP the device is running.
-("hpicfBridgeRstpForceVersion" with fallback to inherited stp_ver())
+(C<hpicfBridgeRstpForceVersion> with fallback to inherited stp_ver())
 
 =back
 
@@ -820,7 +820,8 @@ Returns reference to hash of IIDs to admin duplex setting.
 
 =item $hp->vendor_i_type()
 
-Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
 
 =item $hp->i_name()
 

Info/Layer2/HP4000.pm

@@ -652,7 +652,8 @@ Returns reference to hash of IIDs to admin duplex setting.
 
 =item $hp->vendor_i_type()
 
-Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
 
 =item $hp->i_name()
 

Info/Layer2/HPVC.pm

@@ -150,7 +150,7 @@ These are methods that return scalar value from SNMP
 
 =item $hp->os()
 
-Returns hpvc
+Returns C<'hpvc'>
 
 =item $hp->os_bin()
 

Info/Layer2/NWSS2300.pm

@@ -863,7 +863,7 @@ Returns 'trapeze'
 
 Tries to reference $nwss2300->id() to F<NTWS-REGISTRATION-DEVICES-MIB>
 
-Removes 'ntwsSwitch' for readability.
+Removes C<'ntwsSwitch'> for readability.
 
 =item $nwss2300->serial()
 
@@ -1170,7 +1170,7 @@ for Ethernet interfaces, nwss2300_ap_name() for thin AP interfaces.
 =item $nwss2300->i_type()
 
 Returns reference to map of IIDs to interface descriptions.  Returns
-C<ifType> for Ethernet interfaces and 'capwapWtpVirtualRadio' for thin AP
+C<ifType> for Ethernet interfaces and C<'capwapWtpVirtualRadio'> for thin AP
 interfaces.
 
 =item $nwss2300->i_up()

Info/Layer3/BlueCoatSG.pm

@@ -141,7 +141,7 @@ Returns C<'sgos'>
 
 =item $router->os_ver()
 
-Tries to resolve version string from "sgProxyVersion"
+Tries to resolve version string from C<"sgProxyVersion">.
 
 =back
 

Info/Layer3/CiscoFWSM.pm

@@ -202,17 +202,17 @@ to a hash.
 =item $fwsm->at_paddr()
 
 This function derives the at_paddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =item $fwsm->at_netaddr()
 
 This function derives the at_netaddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =item $fwsm->at_ifaddr()
 
 This function derives the at_ifaddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =back
 

Info/Layer3/Enterasys.pm

@@ -390,8 +390,8 @@ identifier (iid).
 
 The LLDP table time filter implementation continuously increments when
 walked and we may never reach the end of the table.  This behavior can be
-modified with the "set snmp timefilter break disable" command,
+modified with the C<"set snmp timefilter break disable"> command,
-unfortunately it is not the default.  These methods are overriden to
+unfortunately it is not the default.  These methods are overridden to
 supply a partial value of zero which means no time filter.
 
 =over

Info/Layer3/Extreme.pm

@@ -957,7 +957,7 @@ Power supplied by PoE ports, in milliwatts
 
 =item $extreme->peth_power_watts()
 
-The configured maximum amount of inline power available to the slot.
+The configured maximum amount of in-line power available to the slot.
 
 (C<extremePethSlotPowerLimit>)
 

Info/Layer3/F5.pm

@@ -405,7 +405,7 @@ Returns the human set port name if exists.
 
 =item $f5->i_type()
 
-Returns 'ethernetCsmacd' for each C<ifIndex>.
+Returns C<'ethernetCsmacd'> for each C<ifIndex>.
 
 =back
 

Info/Layer3/Force10.pm

@@ -294,7 +294,7 @@ These are methods that return scalar values from SNMP:
 
 =item $force10->vendor()
 
-    Returns 'force10'
+Returns C<'force10'>
 
 =item $force10->hasCDP()
 
@@ -306,7 +306,7 @@ Tries to reference $force10->id() to the Force10 product MIB listed above.
 
 =item $force10->os()
 
-Returns 'ftos'
+Returns C<'ftos'>.
 
 =item $force10->os_ver()
 

Info/Layer3/Juniper.pm

@@ -575,7 +575,7 @@ Subclass for Juniper Devices running JUNOS
 
 =over
 
-=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC or later.
+=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" or later.
 
 =item F<JUNIPER-CHASSIS-DEFINES-MIB>
 

Info/Layer3/Mikrotik.pm

@@ -134,11 +134,11 @@ These are methods that return scalar value from SNMP
 
 =item $mikrotik->vendor()
 
-Returns 'mikrotik'.
+Returns C<'mikrotik'>.
 
 =item $mikrotik->os()
 
-Returns 'routeros'.
+Returns C<'routeros'>.
 
 =item $mikrotik->model()
 

Info/Layer3/Netscreen.pm

@@ -544,11 +544,11 @@ Tries to reference $netscreen->id() to F<NETSCREEN-PRODUCTS-MIB>
 
 =item $netscreen->vendor()
 
-Returns 'juniper'
+Returns C<'juniper'>
 
 =item $netscreen->os()
 
-Returns 'screenos'
+Returns C<'screenos'>
 
 =item $netscreen->os_ver()
 

Info/Layer3/Nexus.pm

@@ -280,11 +280,11 @@ Returns 'cisco'
 
 =item $nexus->os()
 
-Returns 'nx-os'
+Returns C<'nx-os'>
 
 =item $nexus->os_ver()
 
-Returns operating system version extracted fron C<sysDescr>.
+Returns operating system version extracted from C<sysDescr>.
 
 =item $nexus->serial()
 
@@ -294,7 +294,7 @@ Returns the serial number of the chassis from F<ENTITY-MIB>.
 
 Tries to reference $nexus->id() to F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
 
-Removes 'cevChassis' for readability.
+Removes C<'cevChassis'> for readability.
 
 =item $nexus->mac()
 

Info/Layer3/PacketFront.pm

@@ -175,7 +175,7 @@ These are methods that return scalar value from SNMP
 
 =item $pfront->vendor()
 
-Returns 'packetfront'.
+Returns C<'packetfront'>.
 
 =item $pfront->os()
 
@@ -187,7 +187,7 @@ Returns the software version extracted from C<sysDescr>.
 
 =item $pfront->serial()
 
-Returns the value of productSerialNo. 
+Returns the value of C<productSerialNo>. 
 
 =back
 

Info/Layer3/Tasman.pm

@@ -199,18 +199,18 @@ These are methods that return scalar values from SNMP
 
 =item $tasman->vendor()
 
-Returns 'avaya'
+Returns C<'avaya'>
 
 =item $tasman->model()
 
 Tries to get the model from C<nnchassisModel> and if not available 
 cross references $tasman->id() to F<NT-ENTERPRISE-DATA-MIB>.
 
-Substitutes 'SR' for 'ntSecureRouter' in the name for readability.
+Substitutes 'SR' for C<'ntSecureRouter'> in the name for readability.
 
 =item $tasman->os()
 
-Returns 'tasman'
+Returns C<'tasman'>
 
 =item $tasman->os_ver()
 
@@ -250,8 +250,8 @@ Grabs the os version from C<nnsysVersion>
 
 =item $tasman->serial()
 
-Tries both (C<nnchassisOperStatus>) and (C<nnchassisSerialNumber>) as OID's
+Tries both (C<nnchassisOperStatus>) and (C<nnchassisSerialNumber>) as oid
-were redefined between versions.
+was redefined between versions.
 
 =back
 

Info/Layer7/APC.pm

@@ -161,7 +161,7 @@ These are methods that return scalar value from SNMP
 
 =item $apc->os()
 
-Returns 'aos'
+Returns C<'aos'>
 
 =item $apc->os_bin()
 
@@ -178,7 +178,7 @@ card serial C<POWERNET-MIB::experimental.2.4.1.2.1> into a pretty string.
 
 =item $apc->vendor()
 
-apc
+Returns C<'apc'>
 
 =item $apc->model()
 

Info/Layer7/Neoteris.pm

@@ -132,7 +132,7 @@ Returns 'juniper'.
 
 =item $neoteris->os()
 
-Returns 'ive'.
+Returns C<'ive'>.
 
 =item $neoteris->os_ver()
 

t/00_local_spelling.t

@@ -18,6 +18,7 @@ __DATA__
 5000BH
 accelar
 acl
+ADSL
 adsl
 af
 agere
@@ -29,8 +30,10 @@ alcatel
 alteon
 Altiga
 altiga
+anycast
 AOS
 ap
+APC
 APs
 Arista
 arista
@@ -43,9 +46,13 @@ ascii
 asn
 ati
 attr
+ATUC
+ATUR
 augenstein
 autonegotiate
 autospecify
+Avaya
+avaya
 baetz
 bayrs
 baystack
@@ -62,6 +69,7 @@ bpdus
 BSSID
 bulkrepeaters
 bulkwalk
+Bulley
 cabletron
 catos
 cdp
@@ -70,20 +78,26 @@ circuitless
 cisco
 cisco's
 ciscovtp
+Citrix
+citrix
 cli
 conf
 config
 contivity
 CPAN
+CPE
 cpu
 ctron
 cyclades
+DataSMART
 datatype
 deauthenticate
 debugsnmp
+dhcp
 dlink
 dmitry
 DOCSIS
+DRG
 ds
 dslam
 dslams
@@ -103,14 +117,18 @@ fastiron
 fdb
 fdp
 fenner
+FreeBSD
 fsm
+FTOS
 FWSM
 fwsm
 gbe
 gbesm
+Gbps
 getnext
 Ghz
 gigabit
+Gorwits
 hartmaier
 iana
 ibm
@@ -119,17 +137,21 @@ ieee
 ietf
 ifindex
 igmp
+IgnoreNetSNMPConf
 iid
 iids
 indices
 ingen
+IOS
 ios
 ip
 IPV
 IPv
 jeroen
 junos
+Kentrox
 kramarov
+ladvd
 lans
 linksys
 lldp
@@ -152,6 +174,7 @@ mibdirs
 mib
 mibs
 milliwatts
+Mikrotik
 msb
 mtu
 multi
@@ -165,11 +188,14 @@ ndp
 netdisco
 netgear
 netmask
+Netscaler
+netscaler
 netscreen
 nmm
 nopassword
 nortel
 nosuch
+NX
 oem
 ofdm
 oid
@@ -179,8 +205,10 @@ os
 osi
 ospf
 overridable
+PacketFront
 pae
 petri
+pfSense
 phy
 pinkoski
 poe
@@ -194,17 +222,21 @@ qbridge
 qos
 queueing
 radlan
+Radware
+radware
 rapidcity
 readme
 readonly
 rebranded
 retrynosuch
 rom
+RouterOS
 rtt
 rttmon
 sca
 Schenau
 sergienko
+SG
 sieborger
 SNMP
 snmp
@@ -213,10 +245,12 @@ snmpv2
 snmpv3
 snmpwalk
 solaris
+SonicWALL
 sonmp
 ssid
 SSID's
 SSIDs
+SSL
 Stickland
 stackable
 stdout
@@ -228,8 +262,10 @@ sunos
 supply's
 synoptics
 sys
+Telesis
 telesyn
 telesys
+terabit
 tftp
 tftpfilename
 tftpserver
@@ -238,11 +274,13 @@ tmnxModel
 todo
 tuttle
 ucsc
+unicast
 uninstall
 uptime
 vlan
 vlans
 vpn
+VSP
 vtp
 watanabe
 wlan