135/snmp-info
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Remove c_* methods from device classes as top level methods will now handle.

Browse Source
This commit is contained in:
Eric A. Miller
2012-11-25 21:39:32 -05:00
parent 5eb66fe442
commit a163e5b82c
14 changed files with 40 additions and 1635 deletions
Download Patch File Download Diff File Expand all files Collapse all files

77
Info/Layer3/AlcatelLucent.pm
View File

@@ -34,6 +34,12 @@ use strict;
use Exporter; use Exporter;
use SNMP::Info::Layer3; use SNMP::Info::Layer3;
use SNMP::Info::MAU; use SNMP::Info::MAU;
# Use LLDP
# (or at least try. The versions I've seen have two problems:
# 1. they report ifIndex values as 'local'; we don't support ifIndex
# but *could*
# 2. They report 0.0.0.0 as the management address
# )
use SNMP::Info::LLDP; use SNMP::Info::LLDP;
@SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU @SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
@@ -285,53 +291,6 @@ sub bp_index {
# return $i_vlan; # return $i_vlan;
#} #}
# Use LLDP
# (or at least try. The versions I've seen have two problems:
# 1. they report ifIndex values as 'local'; we don't support ifIndex
# but *could*
# 2. They report 0.0.0.0 as the management address
# )
sub hasCDP {
my $alu = shift;
return $alu->hasLLDP();
}
sub c_ip {
my $alu = shift;
my $partial = shift;
return $alu->lldp_ip($partial);
}
sub c_if {
my $alu = shift;
my $partial = shift;
return $alu->lldp_if($partial);
}
sub c_port {
my $alu = shift;
my $partial = shift;
return $alu->lldp_port($partial);
}
sub c_id {
my $alu = shift;
my $partial = shift;
return $alu->lldp_id($partial);
}
sub c_platform {
my $alu = shift;
my $partial = shift;
return $alu->lldp_rem_sysdesc($partial);
}
# Power-Ethernet ifIndex mapping. I've only seen this from a # Power-Ethernet ifIndex mapping. I've only seen this from a
# fixed-config single-module system, so this is only a plausible # fixed-config single-module system, so this is only a plausible
# guess as to the mapping on a stack or modular system. # guess as to the mapping on a stack or modular system.
@@ -428,10 +387,6 @@ These are methods that return scalar value from SNMP
Returns 'alcatel-lucent' Returns 'alcatel-lucent'
=item $alu->hasCDP()
Returns whether LLDP is enabled.
=item $alu->model() =item $alu->model()
Tries to reference $alu->id() to one of the product MIBs listed above Tries to reference $alu->id() to one of the product MIBs listed above
@@ -502,26 +457,6 @@ Work around various bugs in the F<BRIDGE-MIB> and
F<Q-BRIDGE-MIB> implementations, by returning both F<Q-BRIDGE-MIB> implementations, by returning both
C<ifIndex> and C<dot1dBasePort> mappings to C<ifIndex> values. C<ifIndex> and C<dot1dBasePort> mappings to C<ifIndex> values.
=item $alu->c_id()
Returns LLDP information.
=item $alu->c_if()
Returns LLDP information.
=item $alu->c_ip()
Returns LLDP information.
=item $alu->c_platform()
Returns LLDP information.
=item $alu->c_port()
Returns LLDP information.
=item $alu->i_duplex_admin() =item $alu->i_duplex_admin()
Returns info from F<MAU-MIB> Returns info from F<MAU-MIB>

8
Info/Layer3/Altiga.pm
View File

@@ -152,10 +152,6 @@ sub os {
return 'altiga'; return 'altiga';
} }
sub hasCDP {
return 0;
}
# $altiga->interfaces() - Map the Interfaces to their physical names # $altiga->interfaces() - Map the Interfaces to their physical names
# Add interface number to interface name to prevent duplicate ifDescr # Add interface number to interface name to prevent duplicate ifDescr
# Included statically configured VPN tunnels if ($int_include_vpn) # Included statically configured VPN tunnels if ($int_include_vpn)
@@ -350,10 +346,6 @@ Tries to determine OS version from the C<sysDescr.0> field. Returns version or C
Combines results from C<fan1_alarm>, C<fan2_alarm>, and C<fam3_alarm> methods. Combines results from C<fan1_alarm>, C<fan2_alarm>, and C<fam3_alarm> methods.
=item $altiga->hasCDP()
No.
=item $altiga->ps1_status() =item $altiga->ps1_status()
Combines C<ps1_3v_alarm> and C<ps1_5v_alarm> methods. Combines C<ps1_3v_alarm> and C<ps1_5v_alarm> methods.

67
Info/Layer3/Arista.pm
View File

@@ -120,49 +120,6 @@ sub fw_port {
return $arista->qb_fw_port($partial); return $arista->qb_fw_port($partial);
} }
# Use LLDP
sub hasCDP {
my $arista = shift;
return $arista->hasLLDP();
}
sub c_ip {
my $arista = shift;
my $partial = shift;
return $arista->lldp_ip($partial);
}
sub c_if {
my $arista = shift;
my $partial = shift;
return $arista->lldp_if($partial);
}
sub c_port {
my $arista = shift;
my $partial = shift;
return $arista->lldp_port($partial);
}
sub c_id {
my $arista = shift;
my $partial = shift;
return $arista->lldp_id($partial);
}
sub c_platform {
my $arista = shift;
my $partial = shift;
return $arista->lldp_rem_sysdesc($partial);
}
1; 1;
__END__ __END__
@@ -232,10 +189,6 @@ These are methods that return scalar values from SNMP
Returns 'Arista Networks, Inc.' Returns 'Arista Networks, Inc.'
=item $arista->hasCDP()
Returns whether LLDP is enabled.
=item $arista->model() =item $arista->model()
Tries to reference $arista->id() to one of the product MIBs listed above Tries to reference $arista->id() to one of the product MIBs listed above
@@ -279,26 +232,6 @@ Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB> Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
=item $arista->c_id()
Returns LLDP information.
=item $arista->c_if()
Returns LLDP information.
=item $arista->c_ip()
Returns LLDP information.
=item $arista->c_platform()
Returns LLDP information.
=item $arista->c_port()
Returns LLDP information.
=item $arista->i_duplex_admin() =item $arista->i_duplex_admin()
Returns info from F<MAU-MIB> Returns info from F<MAU-MIB>

186
Info/Layer3/C3550.pm
View File

@@ -236,141 +236,6 @@ sub cisco_comm_indexing {
return 1; return 1;
} }
# Use CDP and/or LLDP
sub hasCDP {
my $c3550 = shift;
return $c3550->hasLLDP() || $c3550->SUPER::hasCDP();
}
sub c_ip {
my $c3550 = shift;
my $partial = shift;
my $cdp = $c3550->SUPER::c_ip($partial) || {};
my $lldp = $c3550->lldp_ip($partial) || {};
my %c_ip;
foreach my $iid ( keys %$cdp ) {
my $ip = $cdp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
}
sub c_if {
my $c3550 = shift;
my $partial = shift;
my $cdp = $c3550->SUPER::c_if($partial) || {};
my %c_if;
foreach my $iid ( keys %$cdp ) {
my $if = $cdp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
# We need to match the lldp key with the ifIndex
# via lldpLocPortId and ifName
my $i_name = $c3550->ifName($partial) || {};
my $i_name_rev = {};
while ( my($key,$val) = each %$i_name ){
$i_name_rev->{$val} = $key;
}
my $loc_port_id = $c3550->lldpLocPortId($partial) || {};
my $lldp = $c3550->lldp_if($partial) || {};
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid} || next;
my $name = $loc_port_id->{$if} || next;
my $i_index = $i_name_rev->{$name} || next;
$c_if{$iid} = $i_index;
}
return \%c_if;
}
sub c_port {
my $c3550 = shift;
my $partial = shift;
my $lldp = $c3550->lldp_port($partial) || {};
my $cdp = $c3550->SUPER::c_port($partial) || {};
my %c_port;
foreach my $iid ( keys %$cdp ) {
my $port = $cdp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
}
sub c_id {
my $c3550 = shift;
my $partial = shift;
my $lldp = $c3550->lldp_id($partial) || {};
my $cdp = $c3550->SUPER::c_id($partial) || {};
my %c_id;
foreach my $iid ( keys %$cdp ) {
my $id = $cdp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $c3550 = shift;
my $partial = shift;
my $lldp = $c3550->lldp_rem_sysdesc($partial) || {};
my $cdp = $c3550->SUPER::c_platform($partial) || {};
my %c_platform;
foreach my $iid ( keys %$cdp ) {
my $platform = $cdp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
}
1; 1;
__END__ __END__
@@ -494,23 +359,6 @@ Returns 1. Use vlan indexing.
=back =back
=head2 Topology information
Based upon the firmware version Cisco devices may support Link Layer Discovery
Protocol (LLDP) in addition to Cisco Discovery Protocol (CDP). These methods
will query both and return the combination of all information. As a result,
there may be identical topology information returned from the two protocols
causing duplicate entries. It is the calling program's responsibility to
identify any duplicate entries and remove duplicates if necessary.
=over
=item $c3550->hasCDP()
Returns true if the device is running either CDP or LLDP.
=back
=head2 Globals imported from SNMP::Info::Layer3 =head2 Globals imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details. See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
@@ -556,40 +404,6 @@ See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
These are methods that return tables of information in the form of a reference These are methods that return tables of information in the form of a reference
to a hash. to a hash.
=over
=item $c3550->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $c3550->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $c3550->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $c3550->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $c3550->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back
=head2 Overrides =head2 Overrides
=over =over

174
Info/Layer3/C6500.pm
View File

@@ -207,133 +207,6 @@ sub set_i_duplex_admin {
} }
} }
# Use CDP and/or LLDP
sub hasCDP {
my $c6500 = shift;
return $c6500->hasLLDP() || $c6500->SUPER::hasCDP();
}
sub c_ip {
my $c6500 = shift;
my $partial = shift;
my $cdp = $c6500->SUPER::c_ip($partial) || {};
my $lldp = $c6500->lldp_ip($partial) || {};
my %c_ip;
foreach my $iid ( keys %$cdp ) {
my $ip = $cdp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
}
sub c_if {
my $c6500 = shift;
my $partial = shift;
my $lldp = $c6500->lldp_if($partial) || {};
my $cdp = $c6500->SUPER::c_if($partial) || {};
my %c_if;
foreach my $iid ( keys %$cdp ) {
my $if = $cdp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
return \%c_if;
}
sub c_port {
my $c6500 = shift;
my $partial = shift;
my $lldp = $c6500->lldp_port($partial) || {};
my $cdp = $c6500->SUPER::c_port($partial) || {};
my %c_port;
foreach my $iid ( keys %$cdp ) {
my $port = $cdp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
}
sub c_id {
my $c6500 = shift;
my $partial = shift;
my $lldp = $c6500->lldp_id($partial) || {};
my $cdp = $c6500->SUPER::c_id($partial) || {};
my %c_id;
foreach my $iid ( keys %$cdp ) {
my $id = $cdp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $c6500 = shift;
my $partial = shift;
my $lldp = $c6500->lldp_rem_sysdesc($partial) || {};
my $cdp = $c6500->SUPER::c_platform($partial) || {};
my %c_platform;
foreach my $iid ( keys %$cdp ) {
my $platform = $cdp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
}
1; 1;
__END__ __END__
@@ -531,53 +404,6 @@ Crosses $c6500->p_port() with $c6500->p_duplex() to utilize port C<ifIndex>.
=back =back
=head2 Topology information
Based upon the firmware version Cisco devices may support Link Layer Discover
Protocol (LLDP) in addition to the Cisco-proprietary CDP. These methods
will query both and return the combination of all information. As a result,
there may be identical topology information returned from the two protocols
causing duplicate entries. It is the calling program's responsibility to
identify any duplicate entries and remove duplicates if necessary.
=over
=item $c6500->hasCDP()
Returns true if the device is running either CDP or LLDP.
=item $c6500->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $c6500->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $c6500->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $c6500->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $c6500->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back
=head2 Table Methods imported from SNMP::Info::CiscoVTP =head2 Table Methods imported from SNMP::Info::CiscoVTP
See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.

73
Info/Layer3/Dell.pm
View File

@@ -232,47 +232,6 @@ sub _vendor {
} }
} }
# lldp support
sub hasCDP {
my $dell = shift;
return $dell->hasLLDP();
}
sub c_ip {
my $dell = shift;
my $partial = shift;
return $dell->lldp_ip($partial);
}
sub c_if {
my $dell = shift;
my $partial = shift;
return $dell->lldp_if($partial);
}
sub c_port {
my $dell = shift;
my $partial = shift;
return $dell->lldp_port($partial);
}
sub c_id {
my $dell = shift;
my $partial = shift;
return $dell->lldp_id($partial);
}
sub c_platform {
my $dell = shift;
my $partial = shift;
return $dell->lldp_rem_sysdesc($partial);
}
1; 1;
__END__ __END__
@@ -368,10 +327,6 @@ id(). Defaults to 'dlink'.
Returns 'dell', 'dlink', or 'ibm' based upon the IANA enterprise number in Returns 'dell', 'dlink', or 'ibm' based upon the IANA enterprise number in
id(). Defaults to 'dlink'. id(). Defaults to 'dlink'.
=item $dell->hasCDP()
Returns whether LLDP is enabled.
=back =back
=head2 Overrides =head2 Overrides
@@ -389,6 +344,10 @@ otherwise uses the Layer3 serial method.
See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details. See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
=head2 Globals imported from SNMP::Info::LLDP
See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
=head1 TABLE METHODS =head1 TABLE METHODS
These are methods that return tables of information in the form of a reference These are methods that return tables of information in the form of a reference
@@ -464,30 +423,14 @@ Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
the C<Q-BRIDGE-MIB> forwarding table. Fall back to the C<BRIDGE-MIB> if the C<Q-BRIDGE-MIB> forwarding table. Fall back to the C<BRIDGE-MIB> if
C<Q-BRIDGE-MIB> doesn't return anything. C<Q-BRIDGE-MIB> doesn't return anything.
=item $dell->c_id()
Returns LLDP information.
=item $dell->c_if()
Returns LLDP information.
=item $dell->c_ip()
Returns LLDP information.
=item $dell->c_platform()
Returns LLDP information.
=item $dell->c_port()
Returns LLDP information.
=back =back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
=head2 Table Methods imported from SNMP::Info::LLDP
See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
=cut =cut

178
Info/Layer3/Enterasys.pm
View File

@@ -165,138 +165,45 @@ sub fw_port {
return $enterasys->qb_fw_port($partial); return $enterasys->qb_fw_port($partial);
} }
# Use CDP and/or LLDP
#
# LLDP table timefilter implementation continuously increments when walked # LLDP table timefilter implementation continuously increments when walked
# and we may never reach the end of the table. This behavior can be # and we may never reach the end of the table. This behavior can be
# modified with the "set snmp timefilter break disable" command, # modified with the "set snmp timefilter break disable" command,
# unfortunately it is not the default. Query with a partial value of zero # unfortunately it is not the default. Query with a partial value of zero
# which means no time filter. # which means no time filter.
sub hasCDP { sub lldp_ip {
my $enterasys = shift; my $enterasys = shift;
my $partial = shift || 0;
return $enterasys->hasLLDP() || $enterasys->SUPER::hasCDP(); return $enterasys->SUPER::lldp_ip($partial);
} }
sub c_ip { sub lldp_if {
my $enterasys = shift; my $enterasys = shift;
my $partial = shift; my $partial = shift || 0;
my $cdp = $enterasys->SUPER::c_ip($partial) || {}; return $enterasys->SUPER::lldp_if($partial);
my $lldp = $enterasys->lldp_ip(0) || {};
my %c_ip;
foreach my $iid ( keys %$cdp ) {
my $ip = $cdp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
} }
sub c_if { sub lldp_port {
my $enterasys = shift; my $enterasys = shift;
my $partial = shift; my $partial = shift || 0;
my $lldp = $enterasys->lldp_if(0) || {}; return $enterasys->SUPER::lldp_port($partial);
my $cdp = $enterasys->SUPER::c_if($partial) || {};
my %c_if;
foreach my $iid ( keys %$cdp ) {
my $if = $cdp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
return \%c_if;
} }
sub c_port { sub lldp_id {
my $enterasys = shift; my $enterasys = shift;
my $partial = shift; my $partial = shift || 0;
my $lldp = $enterasys->lldp_port(0) || {}; return $enterasys->SUPER::lldp_id($partial);
my $cdp = $enterasys->SUPER::c_port($partial) || {};
my %c_port;
foreach my $iid ( keys %$cdp ) {
my $port = $cdp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
} }
sub c_id { sub lldp_platform {
my $enterasys = shift; my $enterasys = shift;
my $partial = shift; my $partial = shift || 0;
my $lldp = $enterasys->lldp_id(0) || {}; return $enterasys->SUPER::lldp_rem_sysdesc($partial);
my $cdp = $enterasys->SUPER::c_id($partial) || {};
my %c_id;
foreach my $iid ( keys %$cdp ) {
my $id = $cdp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $enterasys = shift;
my $partial = shift;
my $lldp = $enterasys->lldp_rem_sysdesc(0) || {};
my $cdp = $enterasys->SUPER::c_platform($partial) || {};
my %c_platform;
foreach my $iid ( keys %$cdp ) {
my $platform = $cdp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
} }
1; 1;
@@ -399,12 +306,6 @@ Returns base mac
=back =back
=head2 Overrides
=over
=back
=head2 Globals imported from SNMP::Info::MAU =head2 Globals imported from SNMP::Info::MAU
See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details. See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
@@ -463,52 +364,25 @@ identifier (iid).
=back =back
=head2 Topology information =head2 Link Layer Discovery Protocol (LLDP) Overrides
Based upon the firmware version Enterasys devices may support Cabletron The LLDP table timefilter implementation continuously increments when
Discovery Protocol (CTRON CDP), Cisco Discovery Protocol (CDP), Link Layer walked and we may never reach the end of the table. This behavior can be
Discovery Protocol (LLDP), or all. This module currently supports CDP and modified with the "set snmp timefilter break disable" command,
LLDP, but not CTRON CDP. These methods will query both CDP and LLDP and unfortunately it is not the default. These methods are overriden to
return the combination of all information. As a result, there may be supply a partial value of zero which means no time filter.
identical topology information returned from the two protocols
causing duplicate entries. It is the calling program's responsibility to
identify any duplicate entries and remove duplicates if necessary.
=over =over
=item $enterasys->hasCDP() =item $enterasys->lldp_if()
Returns true if the device is running either CDP or LLDP. =item $enterasys->lldp_ip()
=item $enterasys->c_if() =item $enterasys->lldp_port()
Returns reference to hash. Key: iid Value: local device port (interfaces) =item $enterasys->lldp_id()
=item $enterasys->c_ip() =item $enterasys->lldp_platform()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $enterasys->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $enterasys->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $enterasys->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back =back

171
Info/Layer3/Extreme.pm
View File

@@ -549,125 +549,6 @@ sub set_add_i_vlan_tagged {
return $rv; return $rv;
} }
# Use EDP and/or LLDP
sub hasCDP {
my $extreme = shift;
return $extreme->hasLLDP() || $extreme->hasEDP();
}
sub c_ip {
my $extreme = shift;
my $partial = shift;
my $edp = $extreme->edp_ip() || {};
my $lldp = $extreme->lldp_ip($partial) || {};
my %c_ip;
foreach my $iid ( keys %$edp ) {
my $ip = $edp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
}
sub c_if {
my $extreme = shift;
my $partial = shift;
my $lldp = $extreme->lldp_if($partial) || {};
my $edp = $extreme->edp_if() || {};
my %c_if;
foreach my $iid ( keys %$edp ) {
my $if = $edp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
return \%c_if;
}
sub c_port {
my $extreme = shift;
my $partial = shift;
my $lldp = $extreme->lldp_port($partial) || {};
my $edp = $extreme->edp_port() || {};
my %c_port;
foreach my $iid ( keys %$edp ) {
my $port = $edp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
}
sub c_id {
my $extreme = shift;
my $partial = shift;
my $lldp = $extreme->lldp_id($partial) || {};
my $edp = $extreme->edp_id() || {};
my %c_id;
foreach my $iid ( keys %$edp ) {
my $id = $edp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $extreme = shift;
my $partial = shift;
my $lldp = $extreme->lldp_rem_sysdesc($partial) || {};
my %c_platform;
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
}
1; 1;
__END__ __END__
@@ -904,58 +785,6 @@ Power supplied by PoE ports, in milliwatts
=back =back
=head2 Topology information
Based upon the firmware version Extreme devices may support Extreme Discovery
Protocol (EDP), Link Layer Discovery Protocol (LLDP), or both. These methods
will query both and return the combination of all information. As a result,
there may be identical topology information returned from the two protocols
causing duplicate entries. It is the calling program's responsibility to
identify any duplicate entries and remove duplicates if necessary.
=over
=item $extreme->hasCDP()
Returns true if the device is running either EDP or LLDP.
=item $extreme->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $extreme->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
With EDP multiple entries may exist with the same local port, c_if(), and
different IPv4 addresses, c_ip(), as EDP reports addresses for each VLAN
transported across the trunk. In the case of LLDP with multiple addresses
there is either a non-LLDP device in between two or more devices or multiple
devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $extreme->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $extreme->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $extreme->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
This information is only available from LLDP. EDP does not provide an
equivalent.
=back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

176
Info/Layer3/Foundry.pm
View File

@@ -268,134 +268,6 @@ sub stp_p_state {
} }
# Use FDP and/or LLDP
sub hasCDP {
my $foundry = shift;
return $foundry->hasLLDP() || $foundry->hasFDP();
}
sub c_ip {
my $foundry = shift;
my $partial = shift;
my $cdp = $foundry->SUPER::c_ip($partial) || {};
my $lldp = $foundry->lldp_ip($partial) || {};
my %c_ip;
foreach my $iid ( keys %$cdp ) {
my $ip = $cdp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
}
sub c_if {
my $foundry = shift;
my $partial = shift;
my $lldp = $foundry->lldp_if($partial) || {};
my $cdp = $foundry->SUPER::c_if($partial) || {};
my %c_if;
foreach my $iid ( keys %$cdp ) {
my $if = $cdp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
return \%c_if;
}
sub c_port {
my $foundry = shift;
my $partial = shift;
my $lldp = $foundry->lldp_port($partial) || {};
my $cdp = $foundry->SUPER::c_port($partial) || {};
my %c_port;
foreach my $iid ( keys %$cdp ) {
my $port = $cdp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
}
sub c_id {
my $foundry = shift;
my $partial = shift;
my $lldp = $foundry->lldp_id($partial) || {};
my $cdp = $foundry->SUPER::c_id($partial) || {};
my %c_id;
foreach my $iid ( keys %$cdp ) {
my $id = $cdp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $foundry = shift;
my $partial = shift;
my $lldp = $foundry->lldp_rem_sysdesc($partial) || {};
my $cdp = $foundry->SUPER::c_platform($partial) || {};
my %c_platform;
foreach my $iid ( keys %$cdp ) {
my $platform = $cdp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
}
1; 1;
__END__ __END__
@@ -607,54 +479,6 @@ Returns reference to hash. Current Port Speed.
=back =back
=head2 Topology information
Based upon the software version devices may support Foundry Discovery
Protocol (FDP) and Link Layer Discovery Protocol (LLDP). These
methods will query both and return the combination of all information. As a
result, there may be identical topology information returned from the two
protocols causing duplicate entries. It is the calling program's
responsibility to identify any duplicate entries and remove duplicates if
necessary.
=over
=item $foundry->hasCDP()
Returns true if the device is running either FDP or LLDP.
=item $foundry->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $foundry->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-FDP/LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $foundry->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $foundry->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $foundry->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

176
Info/Layer3/HP9300.pm
View File

@@ -196,134 +196,6 @@ sub interfaces {
return $i_descr; return $i_descr;
} }
# Use FDP and/or LLDP
sub hasCDP {
my $hp9300 = shift;
return $hp9300->hasLLDP() || $hp9300->SUPER::hasCDP();
}
sub c_ip {
my $hp9300 = shift;
my $partial = shift;
my $cdp = $hp9300->SUPER::c_ip($partial) || {};
my $lldp = $hp9300->lldp_ip($partial) || {};
my %c_ip;
foreach my $iid ( keys %$cdp ) {
my $ip = $cdp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
}
sub c_if {
my $hp9300 = shift;
my $partial = shift;
my $lldp = $hp9300->lldp_if($partial) || {};
my $cdp = $hp9300->SUPER::c_if($partial) || {};
my %c_if;
foreach my $iid ( keys %$cdp ) {
my $if = $cdp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
return \%c_if;
}
sub c_port {
my $hp9300 = shift;
my $partial = shift;
my $lldp = $hp9300->lldp_port($partial) || {};
my $cdp = $hp9300->SUPER::c_port($partial) || {};
my %c_port;
foreach my $iid ( keys %$cdp ) {
my $port = $cdp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
}
sub c_id {
my $hp9300 = shift;
my $partial = shift;
my $lldp = $hp9300->lldp_id($partial) || {};
my $cdp = $hp9300->SUPER::c_id($partial) || {};
my %c_id;
foreach my $iid ( keys %$cdp ) {
my $id = $cdp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $hp9300 = shift;
my $partial = shift;
my $lldp = $hp9300->lldp_rem_sysdesc($partial) || {};
my $cdp = $hp9300->SUPER::c_platform($partial) || {};
my %c_platform;
foreach my $iid ( keys %$cdp ) {
my $platform = $cdp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
}
1; 1;
__END__ __END__
@@ -527,54 +399,6 @@ Returns reference to hash. Current Port Speed.
=back =back
=head2 Topology information
Based upon the software version devices may support Foundry Discovery
Protocol (FDP) and Link Layer Discovery Protocol (LLDP). These
methods will query both and return the combination of all information. As a
result, there may be identical topology information returned from the two
protocols causing duplicate entries. It is the calling program's
responsibility to identify any duplicate entries and remove duplicates
if necessary.
=over
=item $hp9300->hasCDP()
Returns true if the device is running either FDP or LLDP.
=item $hp9300->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $hp9300->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-FDP/LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $hp9300->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $hp9300->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $hp9300->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

76
Info/Layer3/Juniper.pm
View File

@@ -248,49 +248,6 @@ sub fw_port {
return $juniper->qb_fw_port($partial); return $juniper->qb_fw_port($partial);
} }
# Use LLDP
sub hasCDP {
my $juniper = shift;
return $juniper->hasLLDP();
}
sub c_ip {
my $juniper = shift;
my $partial = shift;
return $juniper->lldp_ip($partial);
}
sub c_if {
my $juniper = shift;
my $partial = shift;
return $juniper->lldp_if($partial);
}
sub c_port {
my $juniper = shift;
my $partial = shift;
return $juniper->lldp_port($partial);
}
sub c_id {
my $juniper = shift;
my $partial = shift;
return $juniper->lldp_id($partial);
}
sub c_platform {
my $juniper = shift;
my $partial = shift;
return $juniper->lldp_rem_sysdesc($partial);
}
# Pseudo ENTITY-MIB methods # Pseudo ENTITY-MIB methods
# This class supports both virtual chassis (stackable) and physical chassis # This class supports both virtual chassis (stackable) and physical chassis
@@ -670,10 +627,6 @@ to in a unique fashion.
(C<dot1dBaseBridgeAddress>) (C<dot1dBaseBridgeAddress>)
=item $juniper->hasCDP()
Returns whether LLDP is enabled.
=back =back
=head2 Globals imported from SNMP::Info::Layer3 =head2 Globals imported from SNMP::Info::Layer3
@@ -718,35 +671,6 @@ IDs. These are the VLANs which are members of the egress list for the port.
=back =back
=head2 Topology information
These methods return Link Layer Discovery Protocol (LLDP) information. See
documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
=over
=item $juniper->c_id()
Returns C<lldp_id>
=item $juniper->c_if()
Returns C<lldp_if>
=item $juniper->c_ip()
Returns C<lldp_ip>
=item $juniper->c_platform()
Returns C<lldp_rem_sysdesc>
=item $juniper->c_port()
Returns C<lldp_port>
=back
=head2 Forwarding Table (C<dot1dTpFdbEntry>) =head2 Forwarding Table (C<dot1dTpFdbEntry>)
=over =over

76
Info/Layer3/NetSNMP.pm
View File

@@ -130,42 +130,6 @@ sub i_ignore {
return \%i_ignore; return \%i_ignore;
} }
# Use LLDP
sub hasCDP {
my $netsnmp = shift;
return $netsnmp->hasLLDP();
}
sub c_ip {
my $netsnmp = shift;
my $partial = shift;
return $netsnmp->lldp_ip($partial);
}
sub c_if {
my $netsnmp = shift;
my $partial = shift;
return $netsnmp->lldp_if($partial);
}
sub c_port {
my $netsnmp = shift;
my $partial = shift;
return $netsnmp->lldp_port($partial);
}
sub c_id {
my $netsnmp = shift;
my $partial = shift;
return $netsnmp->lldp_id($partial);
}
sub c_platform {
my $netsnmp = shift;
my $partial = shift;
return $netsnmp->lldp_rem_sysdesc($partial);
}
1; 1;
__END__ __END__
@@ -278,46 +242,6 @@ Ignores loopback
=back =back
=head2 Topology information
Link Layer Discovery Protocol (LLDP) support. The device must be running
an optional LLDP agent, such as lldpd, which can integrate with the SNMP agent.
=over
=item $netsnmp->hasCDP()
Returns true if the device is running LLDP.
=item $netsnmp->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $netsnmp->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $netsnmp->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $netsnmp->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $netsnmp->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3> for details. See documentation in L<SNMP::Info::Layer3> for details.

173
Info/Layer3/Nexus.pm
View File

@@ -173,132 +173,6 @@ sub model {
return $model; return $model;
} }
# Use CDP and/or LLDP
sub hasCDP {
my $nexus = shift;
return $nexus->hasLLDP() || $nexus->SUPER::hasCDP();
}
sub c_ip {
my $nexus = shift;
my $partial = shift;
my $cdp = $nexus->SUPER::c_ip($partial) || {};
my $lldp = $nexus->lldp_ip($partial) || {};
my %c_ip;
foreach my $iid ( keys %$cdp ) {
my $ip = $cdp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
foreach my $iid ( keys %$lldp ) {
my $ip = $lldp->{$iid};
next unless defined $ip;
$c_ip{$iid} = $ip;
}
return \%c_ip;
}
sub c_if {
my $nexus = shift;
my $partial = shift;
my $lldp = $nexus->lldp_if($partial) || {};
my $cdp = $nexus->SUPER::c_if($partial) || {};
my %c_if;
foreach my $iid ( keys %$cdp ) {
my $if = $cdp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
foreach my $iid ( keys %$lldp ) {
my $if = $lldp->{$iid};
next unless defined $if;
$c_if{$iid} = $if;
}
return \%c_if;
}
sub c_port {
my $nexus = shift;
my $partial = shift;
my $lldp = $nexus->lldp_port($partial) || {};
my $cdp = $nexus->SUPER::c_port($partial) || {};
my %c_port;
foreach my $iid ( keys %$cdp ) {
my $port = $cdp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
foreach my $iid ( keys %$lldp ) {
my $port = $lldp->{$iid};
next unless defined $port;
$c_port{$iid} = $port;
}
return \%c_port;
}
sub c_id {
my $nexus = shift;
my $partial = shift;
my $lldp = $nexus->lldp_id($partial) || {};
my $cdp = $nexus->SUPER::c_id($partial) || {};
my %c_id;
foreach my $iid ( keys %$cdp ) {
my $id = $cdp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
foreach my $iid ( keys %$lldp ) {
my $id = $lldp->{$iid};
next unless defined $id;
$c_id{$iid} = $id;
}
return \%c_id;
}
sub c_platform {
my $nexus = shift;
my $partial = shift;
my $lldp = $nexus->lldp_rem_sysdesc($partial) || {};
my $cdp = $nexus->SUPER::c_platform($partial) || {};
my %c_platform;
foreach my $iid ( keys %$cdp ) {
my $platform = $cdp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
foreach my $iid ( keys %$lldp ) {
my $platform = $lldp->{$iid};
next unless defined $platform;
$c_platform{$iid} = $platform;
}
return \%c_platform;
}
1; 1;
__END__ __END__
@@ -472,53 +346,6 @@ See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
These are methods that return tables of information in the form of a reference These are methods that return tables of information in the form of a reference
to a hash. to a hash.
=head2 Topology information
Based upon the firmware version Cisco devices may support Link Layer Discover
Protocol (LLDP) in addition to the Cisco-proprietary CDP. These methods
will query both and return the combination of all information. As a result,
there may be identical topology information returned from the two protocols
causing duplicate entries. It is the calling program's responsibility to
identify any duplicate entries and remove duplicates if necessary.
=over
=item $nexus->hasCDP()
Returns true if the device is running either CDP or LLDP.
=item $nexus->c_if()
Returns reference to hash. Key: iid Value: local device port (interfaces)
=item $nexus->c_ip()
Returns reference to hash. Key: iid Value: remote IPv4 address
If multiple entries exist with the same local port, c_if(), with the same IPv4
address, c_ip(), it may be a duplicate entry.
If multiple entries exist with the same local port, c_if(), with different
IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
or more devices or multiple devices which are not directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
=item $nexus->c_port()
Returns reference to hash. Key: iid Value: remote port (interfaces)
=item $nexus->c_id()
Returns reference to hash. Key: iid Value: string value used to identify the
chassis component associated with the remote system.
=item $nexus->c_platform()
Returns reference to hash. Key: iid Value: Remote Device Type
=back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

64
Info/Layer3/Pf.pm
View File

@@ -118,42 +118,6 @@ sub os_ver {
return $os_ver; return $os_ver;
} }
# Use LLDP
sub hasCDP {
my $pf = shift;
return $pf->hasLLDP();
}
sub c_ip {
my $pf = shift;
my $partial = shift;
return $pf->lldp_ip($partial);
}
sub c_if {
my $pf = shift;
my $partial = shift;
return $pf->lldp_if($partial);
}
sub c_port {
my $pf = shift;
my $partial = shift;
return $pf->lldp_port($partial);
}
sub c_id {
my $pf = shift;
my $partial = shift;
return $pf->lldp_id($partial);
}
sub c_platform {
my $pf = shift;
my $partial = shift;
return $pf->lldp_rem_sysdesc($partial);
}
1; 1;
__END__ __END__
@@ -230,10 +194,6 @@ These are methods that return scalar values from SNMP
Returns 'FreeBSD' Returns 'FreeBSD'
=item $pf->hasCDP()
Returns whether LLDP is enabled.
=item $pf->model() =item $pf->model()
Grabs the os version from C<sysDescr> Grabs the os version from C<sysDescr>
@@ -259,30 +219,6 @@ See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
These are methods that return tables of information in the form of a reference These are methods that return tables of information in the form of a reference
to a hash. to a hash.
=over
=item $pf->c_id()
Returns LLDP information.
=item $pf->c_if()
Returns LLDP information.
=item $pf->c_ip()
Returns LLDP information.
=item $pf->c_platform()
Returns LLDP information.
=item $pf->c_port()
Returns LLDP information.
=back
=head2 Table Methods imported from SNMP::Info::Layer3 =head2 Table Methods imported from SNMP::Info::Layer3
See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details. See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.