From f2f95150bd0a370ded48a5dc542dc2ff576ee7d7 Mon Sep 17 00:00:00 2001 From: Oliver Gorwits Date: Fri, 2 Feb 2018 18:03:34 +0000 Subject: [PATCH] release 3.43 --- .gitignore | 1 - META.json | 236 +-- META.yml | 236 +-- README | 2159 +++++++++++++++++++++++++ lib/SNMP/Info.pm | 4 +- lib/SNMP/Info/AMAP.pm | 2 +- lib/SNMP/Info/AdslLine.pm | 2 +- lib/SNMP/Info/Aggregate.pm | 2 +- lib/SNMP/Info/Airespace.pm | 2 +- lib/SNMP/Info/Bridge.pm | 2 +- lib/SNMP/Info/CDP.pm | 2 +- lib/SNMP/Info/CiscoAgg.pm | 2 +- lib/SNMP/Info/CiscoConfig.pm | 2 +- lib/SNMP/Info/CiscoPortSecurity.pm | 2 +- lib/SNMP/Info/CiscoPower.pm | 2 +- lib/SNMP/Info/CiscoQOS.pm | 2 +- lib/SNMP/Info/CiscoRTT.pm | 2 +- lib/SNMP/Info/CiscoStack.pm | 2 +- lib/SNMP/Info/CiscoStats.pm | 2 +- lib/SNMP/Info/CiscoStpExtensions.pm | 2 +- lib/SNMP/Info/CiscoVTP.pm | 2 +- lib/SNMP/Info/EDP.pm | 2 +- lib/SNMP/Info/Entity.pm | 2 +- lib/SNMP/Info/EtherLike.pm | 2 +- lib/SNMP/Info/FDP.pm | 2 +- lib/SNMP/Info/IEEE802dot11.pm | 2 +- lib/SNMP/Info/IEEE802dot3ad.pm | 2 +- lib/SNMP/Info/IPv6.pm | 2 +- lib/SNMP/Info/LLDP.pm | 2 +- lib/SNMP/Info/Layer1.pm | 2 +- lib/SNMP/Info/Layer1/Allied.pm | 2 +- lib/SNMP/Info/Layer1/Asante.pm | 2 +- lib/SNMP/Info/Layer1/Bayhub.pm | 2 +- lib/SNMP/Info/Layer1/Cyclades.pm | 2 +- lib/SNMP/Info/Layer1/S3000.pm | 2 +- lib/SNMP/Info/Layer2.pm | 2 +- lib/SNMP/Info/Layer2/3Com.pm | 2 +- lib/SNMP/Info/Layer2/Adtran.pm | 2 +- lib/SNMP/Info/Layer2/Airespace.pm | 2 +- lib/SNMP/Info/Layer2/Aironet.pm | 2 +- lib/SNMP/Info/Layer2/Allied.pm | 2 +- lib/SNMP/Info/Layer2/Baystack.pm | 2 +- lib/SNMP/Info/Layer2/C1900.pm | 2 +- lib/SNMP/Info/Layer2/C2900.pm | 2 +- lib/SNMP/Info/Layer2/Catalyst.pm | 2 +- lib/SNMP/Info/Layer2/Centillion.pm | 2 +- lib/SNMP/Info/Layer2/Cisco.pm | 2 +- lib/SNMP/Info/Layer2/CiscoSB.pm | 2 +- lib/SNMP/Info/Layer2/HP.pm | 2 +- lib/SNMP/Info/Layer2/HP4000.pm | 2 +- lib/SNMP/Info/Layer2/HPVC.pm | 2 +- lib/SNMP/Info/Layer2/Kentrox.pm | 2 +- lib/SNMP/Info/Layer2/N2270.pm | 2 +- lib/SNMP/Info/Layer2/NAP222x.pm | 2 +- lib/SNMP/Info/Layer2/NWSS2300.pm | 2 +- lib/SNMP/Info/Layer2/Netgear.pm | 2 +- lib/SNMP/Info/Layer2/Orinoco.pm | 2 +- lib/SNMP/Info/Layer2/Trapeze.pm | 2 +- lib/SNMP/Info/Layer2/Ubiquiti.pm | 2 +- lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm | 2 +- lib/SNMP/Info/Layer3.pm | 2 +- lib/SNMP/Info/Layer3/Aironet.pm | 2 +- lib/SNMP/Info/Layer3/AlcatelLucent.pm | 2 +- lib/SNMP/Info/Layer3/AlteonAD.pm | 2 +- lib/SNMP/Info/Layer3/Altiga.pm | 2 +- lib/SNMP/Info/Layer3/Arista.pm | 2 +- lib/SNMP/Info/Layer3/Aruba.pm | 2 +- lib/SNMP/Info/Layer3/BayRS.pm | 2 +- lib/SNMP/Info/Layer3/BlueCoatSG.pm | 2 +- lib/SNMP/Info/Layer3/C3550.pm | 2 +- lib/SNMP/Info/Layer3/C4000.pm | 2 +- lib/SNMP/Info/Layer3/C6500.pm | 2 +- lib/SNMP/Info/Layer3/CheckPoint.pm | 2 +- lib/SNMP/Info/Layer3/Cisco.pm | 2 +- lib/SNMP/Info/Layer3/CiscoASA.pm | 2 +- lib/SNMP/Info/Layer3/CiscoFWSM.pm | 2 +- lib/SNMP/Info/Layer3/CiscoSwitch.pm | 2 +- lib/SNMP/Info/Layer3/Contivity.pm | 2 +- lib/SNMP/Info/Layer3/DLink.pm | 2 +- lib/SNMP/Info/Layer3/Dell.pm | 2 +- lib/SNMP/Info/Layer3/Enterasys.pm | 2 +- lib/SNMP/Info/Layer3/Extreme.pm | 2 +- lib/SNMP/Info/Layer3/F5.pm | 2 +- lib/SNMP/Info/Layer3/Force10.pm | 2 +- lib/SNMP/Info/Layer3/Fortinet.pm | 2 +- lib/SNMP/Info/Layer3/Foundry.pm | 2 +- lib/SNMP/Info/Layer3/H3C.pm | 2 +- lib/SNMP/Info/Layer3/HP9300.pm | 2 +- lib/SNMP/Info/Layer3/Huawei.pm | 2 +- lib/SNMP/Info/Layer3/IBMGbTor.pm | 2 +- lib/SNMP/Info/Layer3/Juniper.pm | 2 +- lib/SNMP/Info/Layer3/Lantronix.pm | 2 +- lib/SNMP/Info/Layer3/Microsoft.pm | 2 +- lib/SNMP/Info/Layer3/Mikrotik.pm | 2 +- lib/SNMP/Info/Layer3/N1600.pm | 2 +- lib/SNMP/Info/Layer3/NetSNMP.pm | 2 +- lib/SNMP/Info/Layer3/Netscreen.pm | 2 +- lib/SNMP/Info/Layer3/Nexus.pm | 2 +- lib/SNMP/Info/Layer3/PacketFront.pm | 2 +- lib/SNMP/Info/Layer3/PaloAlto.pm | 2 +- lib/SNMP/Info/Layer3/Passport.pm | 2 +- lib/SNMP/Info/Layer3/Pf.pm | 2 +- lib/SNMP/Info/Layer3/Pica8.pm | 2 +- lib/SNMP/Info/Layer3/SonicWALL.pm | 2 +- lib/SNMP/Info/Layer3/Steelhead.pm | 2 +- lib/SNMP/Info/Layer3/Sun.pm | 2 +- lib/SNMP/Info/Layer3/Tasman.pm | 2 +- lib/SNMP/Info/Layer3/Timetra.pm | 2 +- lib/SNMP/Info/Layer3/VMware.pm | 2 +- lib/SNMP/Info/Layer3/VyOS.pm | 2 +- lib/SNMP/Info/Layer7.pm | 2 +- lib/SNMP/Info/Layer7/APC.pm | 2 +- lib/SNMP/Info/Layer7/CiscoIPS.pm | 2 +- lib/SNMP/Info/Layer7/Neoteris.pm | 2 +- lib/SNMP/Info/Layer7/Netscaler.pm | 2 +- lib/SNMP/Info/MAU.pm | 2 +- lib/SNMP/Info/MRO.pm | 2 +- lib/SNMP/Info/NortelStack.pm | 2 +- lib/SNMP/Info/PowerEthernet.pm | 2 +- lib/SNMP/Info/RapidCity.pm | 2 +- lib/SNMP/Info/SONMP.pm | 2 +- 121 files changed, 2513 insertions(+), 355 deletions(-) create mode 100644 README diff --git a/.gitignore b/.gitignore index ef59c71b..ffadc6ab 100644 --- a/.gitignore +++ b/.gitignore @@ -9,4 +9,3 @@ Makefile* Build _build blib -README diff --git a/META.json b/META.json index 07979184..80f68a2c 100644 --- a/META.json +++ b/META.json @@ -42,471 +42,471 @@ "provides" : { "SNMP::Info" : { "file" : "lib/SNMP/Info.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::AMAP" : { "file" : "lib/SNMP/Info/AMAP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::AdslLine" : { "file" : "lib/SNMP/Info/AdslLine.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Aggregate" : { "file" : "lib/SNMP/Info/Aggregate.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Airespace" : { "file" : "lib/SNMP/Info/Airespace.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Bridge" : { "file" : "lib/SNMP/Info/Bridge.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CDP" : { "file" : "lib/SNMP/Info/CDP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoAgg" : { "file" : "lib/SNMP/Info/CiscoAgg.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoConfig" : { "file" : "lib/SNMP/Info/CiscoConfig.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoPortSecurity" : { "file" : "lib/SNMP/Info/CiscoPortSecurity.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoPower" : { "file" : "lib/SNMP/Info/CiscoPower.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoQOS" : { "file" : "lib/SNMP/Info/CiscoQOS.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoRTT" : { "file" : "lib/SNMP/Info/CiscoRTT.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoStack" : { "file" : "lib/SNMP/Info/CiscoStack.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoStats" : { "file" : "lib/SNMP/Info/CiscoStats.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoStpExtensions" : { "file" : "lib/SNMP/Info/CiscoStpExtensions.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::CiscoVTP" : { "file" : "lib/SNMP/Info/CiscoVTP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::EDP" : { "file" : "lib/SNMP/Info/EDP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Entity" : { "file" : "lib/SNMP/Info/Entity.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::EtherLike" : { "file" : "lib/SNMP/Info/EtherLike.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::FDP" : { "file" : "lib/SNMP/Info/FDP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::IEEE802dot11" : { "file" : "lib/SNMP/Info/IEEE802dot11.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::IEEE802dot3ad" : { "file" : "lib/SNMP/Info/IEEE802dot3ad.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::IPv6" : { "file" : "lib/SNMP/Info/IPv6.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::LLDP" : { "file" : "lib/SNMP/Info/LLDP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer1" : { "file" : "lib/SNMP/Info/Layer1.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer1::Allied" : { "file" : "lib/SNMP/Info/Layer1/Allied.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer1::Asante" : { "file" : "lib/SNMP/Info/Layer1/Asante.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer1::Bayhub" : { "file" : "lib/SNMP/Info/Layer1/Bayhub.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer1::Cyclades" : { "file" : "lib/SNMP/Info/Layer1/Cyclades.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer1::S3000" : { "file" : "lib/SNMP/Info/Layer1/S3000.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2" : { "file" : "lib/SNMP/Info/Layer2.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::3Com" : { "file" : "lib/SNMP/Info/Layer2/3Com.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Adtran" : { "file" : "lib/SNMP/Info/Layer2/Adtran.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Airespace" : { "file" : "lib/SNMP/Info/Layer2/Airespace.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Aironet" : { "file" : "lib/SNMP/Info/Layer2/Aironet.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Allied" : { "file" : "lib/SNMP/Info/Layer2/Allied.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Baystack" : { "file" : "lib/SNMP/Info/Layer2/Baystack.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::C1900" : { "file" : "lib/SNMP/Info/Layer2/C1900.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::C2900" : { "file" : "lib/SNMP/Info/Layer2/C2900.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Catalyst" : { "file" : "lib/SNMP/Info/Layer2/Catalyst.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Centillion" : { "file" : "lib/SNMP/Info/Layer2/Centillion.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Cisco" : { "file" : "lib/SNMP/Info/Layer2/Cisco.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::CiscoSB" : { "file" : "lib/SNMP/Info/Layer2/CiscoSB.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::HP" : { "file" : "lib/SNMP/Info/Layer2/HP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::HP4000" : { "file" : "lib/SNMP/Info/Layer2/HP4000.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::HPVC" : { "file" : "lib/SNMP/Info/Layer2/HPVC.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Kentrox" : { "file" : "lib/SNMP/Info/Layer2/Kentrox.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::N2270" : { "file" : "lib/SNMP/Info/Layer2/N2270.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::NAP222x" : { "file" : "lib/SNMP/Info/Layer2/NAP222x.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::NWSS2300" : { "file" : "lib/SNMP/Info/Layer2/NWSS2300.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Netgear" : { "file" : "lib/SNMP/Info/Layer2/Netgear.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Orinoco" : { "file" : "lib/SNMP/Info/Layer2/Orinoco.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Trapeze" : { "file" : "lib/SNMP/Info/Layer2/Trapeze.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::Ubiquiti" : { "file" : "lib/SNMP/Info/Layer2/Ubiquiti.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer2::ZyXEL_DSLAM" : { "file" : "lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3" : { "file" : "lib/SNMP/Info/Layer3.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Aironet" : { "file" : "lib/SNMP/Info/Layer3/Aironet.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::AlcatelLucent" : { "file" : "lib/SNMP/Info/Layer3/AlcatelLucent.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::AlteonAD" : { "file" : "lib/SNMP/Info/Layer3/AlteonAD.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Altiga" : { "file" : "lib/SNMP/Info/Layer3/Altiga.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Arista" : { "file" : "lib/SNMP/Info/Layer3/Arista.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Aruba" : { "file" : "lib/SNMP/Info/Layer3/Aruba.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::BayRS" : { "file" : "lib/SNMP/Info/Layer3/BayRS.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::BlueCoatSG" : { "file" : "lib/SNMP/Info/Layer3/BlueCoatSG.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::C3550" : { "file" : "lib/SNMP/Info/Layer3/C3550.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::C4000" : { "file" : "lib/SNMP/Info/Layer3/C4000.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::C6500" : { "file" : "lib/SNMP/Info/Layer3/C6500.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::CheckPoint" : { "file" : "lib/SNMP/Info/Layer3/CheckPoint.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Cisco" : { "file" : "lib/SNMP/Info/Layer3/Cisco.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::CiscoASA" : { "file" : "lib/SNMP/Info/Layer3/CiscoASA.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::CiscoFWSM" : { "file" : "lib/SNMP/Info/Layer3/CiscoFWSM.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::CiscoSwitch" : { "file" : "lib/SNMP/Info/Layer3/CiscoSwitch.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Contivity" : { "file" : "lib/SNMP/Info/Layer3/Contivity.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::DLink" : { "file" : "lib/SNMP/Info/Layer3/DLink.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Dell" : { "file" : "lib/SNMP/Info/Layer3/Dell.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Enterasys" : { "file" : "lib/SNMP/Info/Layer3/Enterasys.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Extreme" : { "file" : "lib/SNMP/Info/Layer3/Extreme.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::F5" : { "file" : "lib/SNMP/Info/Layer3/F5.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Force10" : { "file" : "lib/SNMP/Info/Layer3/Force10.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Fortinet" : { "file" : "lib/SNMP/Info/Layer3/Fortinet.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Foundry" : { "file" : "lib/SNMP/Info/Layer3/Foundry.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::H3C" : { "file" : "lib/SNMP/Info/Layer3/H3C.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::HP9300" : { "file" : "lib/SNMP/Info/Layer3/HP9300.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Huawei" : { "file" : "lib/SNMP/Info/Layer3/Huawei.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::IBMGbTor" : { "file" : "lib/SNMP/Info/Layer3/IBMGbTor.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Juniper" : { "file" : "lib/SNMP/Info/Layer3/Juniper.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Lantronix" : { "file" : "lib/SNMP/Info/Layer3/Lantronix.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Microsoft" : { "file" : "lib/SNMP/Info/Layer3/Microsoft.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Mikrotik" : { "file" : "lib/SNMP/Info/Layer3/Mikrotik.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::N1600" : { "file" : "lib/SNMP/Info/Layer3/N1600.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::NetSNMP" : { "file" : "lib/SNMP/Info/Layer3/NetSNMP.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Netscreen" : { "file" : "lib/SNMP/Info/Layer3/Netscreen.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Nexus" : { "file" : "lib/SNMP/Info/Layer3/Nexus.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::PacketFront" : { "file" : "lib/SNMP/Info/Layer3/PacketFront.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::PaloAlto" : { "file" : "lib/SNMP/Info/Layer3/PaloAlto.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Passport" : { "file" : "lib/SNMP/Info/Layer3/Passport.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Pf" : { "file" : "lib/SNMP/Info/Layer3/Pf.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Pica8" : { "file" : "lib/SNMP/Info/Layer3/Pica8.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::SonicWALL" : { "file" : "lib/SNMP/Info/Layer3/SonicWALL.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Steelhead" : { "file" : "lib/SNMP/Info/Layer3/Steelhead.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Sun" : { "file" : "lib/SNMP/Info/Layer3/Sun.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Tasman" : { "file" : "lib/SNMP/Info/Layer3/Tasman.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::Timetra" : { "file" : "lib/SNMP/Info/Layer3/Timetra.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::VMware" : { "file" : "lib/SNMP/Info/Layer3/VMware.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer3::VyOS" : { "file" : "lib/SNMP/Info/Layer3/VyOS.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer7" : { "file" : "lib/SNMP/Info/Layer7.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer7::APC" : { "file" : "lib/SNMP/Info/Layer7/APC.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer7::CiscoIPS" : { "file" : "lib/SNMP/Info/Layer7/CiscoIPS.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer7::Neoteris" : { "file" : "lib/SNMP/Info/Layer7/Neoteris.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::Layer7::Netscaler" : { "file" : "lib/SNMP/Info/Layer7/Netscaler.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::MAU" : { "file" : "lib/SNMP/Info/MAU.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::MRO" : { "file" : "lib/SNMP/Info/MRO.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::NortelStack" : { "file" : "lib/SNMP/Info/NortelStack.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::PowerEthernet" : { "file" : "lib/SNMP/Info/PowerEthernet.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::RapidCity" : { "file" : "lib/SNMP/Info/RapidCity.pm", - "version" : "3.42" + "version" : "3.43" }, "SNMP::Info::SONMP" : { "file" : "lib/SNMP/Info/SONMP.pm", - "version" : "3.42" + "version" : "3.43" } }, "release_status" : "stable", @@ -524,6 +524,6 @@ "x_IRC" : "irc://irc.freenode.org/#netdisco", "x_MailingList" : "https://lists.sourceforge.net/lists/listinfo/snmp-info-users" }, - "version" : "3.42", + "version" : "3.43", "x_serialization_backend" : "JSON::PP version 2.94" } diff --git a/META.yml b/META.yml index 0699424b..e7aaca4c 100644 --- a/META.yml +++ b/META.yml @@ -17,355 +17,355 @@ name: SNMP-Info provides: SNMP::Info: file: lib/SNMP/Info.pm - version: '3.42' + version: '3.43' SNMP::Info::AMAP: file: lib/SNMP/Info/AMAP.pm - version: '3.42' + version: '3.43' SNMP::Info::AdslLine: file: lib/SNMP/Info/AdslLine.pm - version: '3.42' + version: '3.43' SNMP::Info::Aggregate: file: lib/SNMP/Info/Aggregate.pm - version: '3.42' + version: '3.43' SNMP::Info::Airespace: file: lib/SNMP/Info/Airespace.pm - version: '3.42' + version: '3.43' SNMP::Info::Bridge: file: lib/SNMP/Info/Bridge.pm - version: '3.42' + version: '3.43' SNMP::Info::CDP: file: lib/SNMP/Info/CDP.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoAgg: file: lib/SNMP/Info/CiscoAgg.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoConfig: file: lib/SNMP/Info/CiscoConfig.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoPortSecurity: file: lib/SNMP/Info/CiscoPortSecurity.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoPower: file: lib/SNMP/Info/CiscoPower.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoQOS: file: lib/SNMP/Info/CiscoQOS.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoRTT: file: lib/SNMP/Info/CiscoRTT.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoStack: file: lib/SNMP/Info/CiscoStack.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoStats: file: lib/SNMP/Info/CiscoStats.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoStpExtensions: file: lib/SNMP/Info/CiscoStpExtensions.pm - version: '3.42' + version: '3.43' SNMP::Info::CiscoVTP: file: lib/SNMP/Info/CiscoVTP.pm - version: '3.42' + version: '3.43' SNMP::Info::EDP: file: lib/SNMP/Info/EDP.pm - version: '3.42' + version: '3.43' SNMP::Info::Entity: file: lib/SNMP/Info/Entity.pm - version: '3.42' + version: '3.43' SNMP::Info::EtherLike: file: lib/SNMP/Info/EtherLike.pm - version: '3.42' + version: '3.43' SNMP::Info::FDP: file: lib/SNMP/Info/FDP.pm - version: '3.42' + version: '3.43' SNMP::Info::IEEE802dot11: file: lib/SNMP/Info/IEEE802dot11.pm - version: '3.42' + version: '3.43' SNMP::Info::IEEE802dot3ad: file: lib/SNMP/Info/IEEE802dot3ad.pm - version: '3.42' + version: '3.43' SNMP::Info::IPv6: file: lib/SNMP/Info/IPv6.pm - version: '3.42' + version: '3.43' SNMP::Info::LLDP: file: lib/SNMP/Info/LLDP.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer1: file: lib/SNMP/Info/Layer1.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer1::Allied: file: lib/SNMP/Info/Layer1/Allied.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer1::Asante: file: lib/SNMP/Info/Layer1/Asante.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer1::Bayhub: file: lib/SNMP/Info/Layer1/Bayhub.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer1::Cyclades: file: lib/SNMP/Info/Layer1/Cyclades.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer1::S3000: file: lib/SNMP/Info/Layer1/S3000.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2: file: lib/SNMP/Info/Layer2.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::3Com: file: lib/SNMP/Info/Layer2/3Com.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Adtran: file: lib/SNMP/Info/Layer2/Adtran.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Airespace: file: lib/SNMP/Info/Layer2/Airespace.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Aironet: file: lib/SNMP/Info/Layer2/Aironet.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Allied: file: lib/SNMP/Info/Layer2/Allied.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Baystack: file: lib/SNMP/Info/Layer2/Baystack.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::C1900: file: lib/SNMP/Info/Layer2/C1900.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::C2900: file: lib/SNMP/Info/Layer2/C2900.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Catalyst: file: lib/SNMP/Info/Layer2/Catalyst.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Centillion: file: lib/SNMP/Info/Layer2/Centillion.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Cisco: file: lib/SNMP/Info/Layer2/Cisco.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::CiscoSB: file: lib/SNMP/Info/Layer2/CiscoSB.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::HP: file: lib/SNMP/Info/Layer2/HP.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::HP4000: file: lib/SNMP/Info/Layer2/HP4000.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::HPVC: file: lib/SNMP/Info/Layer2/HPVC.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Kentrox: file: lib/SNMP/Info/Layer2/Kentrox.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::N2270: file: lib/SNMP/Info/Layer2/N2270.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::NAP222x: file: lib/SNMP/Info/Layer2/NAP222x.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::NWSS2300: file: lib/SNMP/Info/Layer2/NWSS2300.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Netgear: file: lib/SNMP/Info/Layer2/Netgear.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Orinoco: file: lib/SNMP/Info/Layer2/Orinoco.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Trapeze: file: lib/SNMP/Info/Layer2/Trapeze.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::Ubiquiti: file: lib/SNMP/Info/Layer2/Ubiquiti.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer2::ZyXEL_DSLAM: file: lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3: file: lib/SNMP/Info/Layer3.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Aironet: file: lib/SNMP/Info/Layer3/Aironet.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::AlcatelLucent: file: lib/SNMP/Info/Layer3/AlcatelLucent.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::AlteonAD: file: lib/SNMP/Info/Layer3/AlteonAD.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Altiga: file: lib/SNMP/Info/Layer3/Altiga.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Arista: file: lib/SNMP/Info/Layer3/Arista.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Aruba: file: lib/SNMP/Info/Layer3/Aruba.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::BayRS: file: lib/SNMP/Info/Layer3/BayRS.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::BlueCoatSG: file: lib/SNMP/Info/Layer3/BlueCoatSG.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::C3550: file: lib/SNMP/Info/Layer3/C3550.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::C4000: file: lib/SNMP/Info/Layer3/C4000.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::C6500: file: lib/SNMP/Info/Layer3/C6500.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::CheckPoint: file: lib/SNMP/Info/Layer3/CheckPoint.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Cisco: file: lib/SNMP/Info/Layer3/Cisco.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::CiscoASA: file: lib/SNMP/Info/Layer3/CiscoASA.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::CiscoFWSM: file: lib/SNMP/Info/Layer3/CiscoFWSM.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::CiscoSwitch: file: lib/SNMP/Info/Layer3/CiscoSwitch.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Contivity: file: lib/SNMP/Info/Layer3/Contivity.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::DLink: file: lib/SNMP/Info/Layer3/DLink.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Dell: file: lib/SNMP/Info/Layer3/Dell.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Enterasys: file: lib/SNMP/Info/Layer3/Enterasys.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Extreme: file: lib/SNMP/Info/Layer3/Extreme.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::F5: file: lib/SNMP/Info/Layer3/F5.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Force10: file: lib/SNMP/Info/Layer3/Force10.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Fortinet: file: lib/SNMP/Info/Layer3/Fortinet.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Foundry: file: lib/SNMP/Info/Layer3/Foundry.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::H3C: file: lib/SNMP/Info/Layer3/H3C.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::HP9300: file: lib/SNMP/Info/Layer3/HP9300.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Huawei: file: lib/SNMP/Info/Layer3/Huawei.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::IBMGbTor: file: lib/SNMP/Info/Layer3/IBMGbTor.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Juniper: file: lib/SNMP/Info/Layer3/Juniper.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Lantronix: file: lib/SNMP/Info/Layer3/Lantronix.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Microsoft: file: lib/SNMP/Info/Layer3/Microsoft.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Mikrotik: file: lib/SNMP/Info/Layer3/Mikrotik.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::N1600: file: lib/SNMP/Info/Layer3/N1600.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::NetSNMP: file: lib/SNMP/Info/Layer3/NetSNMP.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Netscreen: file: lib/SNMP/Info/Layer3/Netscreen.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Nexus: file: lib/SNMP/Info/Layer3/Nexus.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::PacketFront: file: lib/SNMP/Info/Layer3/PacketFront.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::PaloAlto: file: lib/SNMP/Info/Layer3/PaloAlto.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Passport: file: lib/SNMP/Info/Layer3/Passport.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Pf: file: lib/SNMP/Info/Layer3/Pf.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Pica8: file: lib/SNMP/Info/Layer3/Pica8.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::SonicWALL: file: lib/SNMP/Info/Layer3/SonicWALL.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Steelhead: file: lib/SNMP/Info/Layer3/Steelhead.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Sun: file: lib/SNMP/Info/Layer3/Sun.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Tasman: file: lib/SNMP/Info/Layer3/Tasman.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::Timetra: file: lib/SNMP/Info/Layer3/Timetra.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::VMware: file: lib/SNMP/Info/Layer3/VMware.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer3::VyOS: file: lib/SNMP/Info/Layer3/VyOS.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer7: file: lib/SNMP/Info/Layer7.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer7::APC: file: lib/SNMP/Info/Layer7/APC.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer7::CiscoIPS: file: lib/SNMP/Info/Layer7/CiscoIPS.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer7::Neoteris: file: lib/SNMP/Info/Layer7/Neoteris.pm - version: '3.42' + version: '3.43' SNMP::Info::Layer7::Netscaler: file: lib/SNMP/Info/Layer7/Netscaler.pm - version: '3.42' + version: '3.43' SNMP::Info::MAU: file: lib/SNMP/Info/MAU.pm - version: '3.42' + version: '3.43' SNMP::Info::MRO: file: lib/SNMP/Info/MRO.pm - version: '3.42' + version: '3.43' SNMP::Info::NortelStack: file: lib/SNMP/Info/NortelStack.pm - version: '3.42' + version: '3.43' SNMP::Info::PowerEthernet: file: lib/SNMP/Info/PowerEthernet.pm - version: '3.42' + version: '3.43' SNMP::Info::RapidCity: file: lib/SNMP/Info/RapidCity.pm - version: '3.42' + version: '3.43' SNMP::Info::SONMP: file: lib/SNMP/Info/SONMP.pm - version: '3.42' + version: '3.43' recommends: Class::ISA: '0' File::Slurp: '0' @@ -382,5 +382,5 @@ resources: homepage: http://netdisco.org/ license: http://opensource.org/licenses/bsd-license.php repository: https://github.com/netdisco/snmp-info -version: '3.42' +version: '3.43' x_serialization_backend: 'CPAN::Meta::YAML version 0.018' diff --git a/README b/README new file mode 100644 index 00000000..d6d2de8c --- /dev/null +++ b/README @@ -0,0 +1,2159 @@ +NAME + SNMP::Info - OO Interface to Network devices and MIBs through SNMP + +VERSION + SNMP::Info - Version 3.43 + +AUTHOR + SNMP::Info is maintained by team of Open Source authors headed by Eric + Miller, Bill Fenner, Max Baker, Jeroen van Ingen and Oliver Gorwits. + + Please visit http://sourceforge.net/projects/snmp-info/ for most + up-to-date list of developers. + + SNMP::Info was originally created at UCSC for the Netdisco project + http://netdisco.org by Max Baker. + +DEVICES SUPPORTED + There are now generic classes for most types of device and so the + authors recommend loading SNMP::Info with AutoSpecify, and then + reporting to the mail list any missing functionality (such as neighbor + discovery tables). + +SYNOPSIS + use SNMP::Info; + + my $info = new SNMP::Info( + # Auto Discover more specific Device Class + AutoSpecify => 1, + Debug => 1, + # The rest is passed to SNMP::Session + DestHost => 'router', + Community => 'public', + Version => 2 + ) or die "Can't connect to device.\n"; + + my $err = $info->error(); + die "SNMP Community or Version probably wrong connecting to device. $err\n" if defined $err; + + $name = $info->name(); + $class = $info->class(); + print "SNMP::Info is using this device class : $class\n"; + + # Find out the Duplex status for the ports + my $interfaces = $info->interfaces(); + my $i_duplex = $info->i_duplex(); + + # Get CDP Neighbor info + my $c_if = $info->c_if(); + my $c_ip = $info->c_ip(); + my $c_port = $info->c_port(); + + # Print out data per port + foreach my $iid (keys %$interfaces){ + my $duplex = $i_duplex->{$iid}; + # Print out physical port name, not snmp iid + my $port = $interfaces->{$iid}; + + print "$port: "; + print "$duplex duplex" if defined $duplex; + + # The CDP Table has table entries different than the interface tables. + # So we use c_if to get the map from cdp table to interface table. + + my %c_map = reverse %$c_if; + my $c_key = $c_map{$iid}; + unless (defined $c_key) { + print "\n\n"; + next; + } + my $neighbor_ip = $c_ip->{$c_key}; + my $neighbor_port = $c_port->{$c_key}; + + print " connected to $neighbor_ip / $neighbor_port\n" if defined $neighbor_ip; + print "\n"; + + } + +SUPPORT + Please direct all support, help, and bug requests to the snmp-info-users + Mailing List at + http://lists.sourceforge.net/lists/listinfo/snmp-info-users. + +DESCRIPTION + SNMP::Info gives an object oriented interface to information obtained + through SNMP. + + This module is geared towards network devices. Subclasses exist for a + number of network devices and common MIBs. + + The idea behind this module is to give a common interface to data from + network devices, leaving the device-specific hacks behind the scenes in + subclasses. + + In the SYNOPSIS example we fetch the name of all the ports on the device + and the duplex setting for that port with two methods -- interfaces() + and i_duplex(). + + The information may be coming from any number of MIB files and is very + vendor specific. SNMP::Info provides you a common method for all + supported devices. + + Adding support for your own device is easy, and takes little SNMP + knowledge. + + The module is not limited to network devices. Any MIB or device can be + given an objected oriented front-end by making a module that consists of + a couple hashes. See EXTENDING SNMP::INFO. + +REQUIREMENTS + 1. Net-SNMP + To use this module, you must have Net-SNMP installed on your system. + More specifically you need the Perl modules that come with it. + + DO NOT INSTALL SNMP:: or Net::SNMP from CPAN! + + The SNMP module is matched to an install of net-snmp, and must be + installed from the net-snmp source tree. + + The Perl module `SNMP' is found inside the net-snmp distribution. Go + to the perl/ directory of the distribution to install it, or run + `./configure --with-perl-modules' from the top directory of the + net-snmp distribution. + + Net-SNMP can be found at http://net-snmp.sourceforge.net + + Version 5.3.2 or greater is recommended. + + Versions 5.0.1, 5.0301 and 5.0203 have issues with bulkwalk and are + not supported. + + Redhat Users: Some versions that come with certain versions of + Redhat/Fedora don't have the Perl library installed. Uninstall the + RPM and install by hand. + + 2. MIBS + SNMP::Info operates on textual descriptors found in MIBs. + + If you are using SNMP::Info separate from Netdisco, download the + Netdisco MIB package at + http://sourceforge.net/projects/netdisco/files/netdisco-mibs/latest- + snapshot/ + + Make sure that your snmp.conf is updated to point to your MIB + directory and that the MIBs are world-readable. + +DESIGN GOALS + 1. Use of textual MIB leaf identifier and enumerated values + * All values are retrieved via MIB Leaf node names + For example SNMP::Info has an entry in its %GLOBALS hash for + ``sysName'' instead of 1.3.6.1.2.1.1.5. + + * Data returned is in the enumerated value form. + For Example instead of looking up 1.3.6.1.2.1.2.2.1.3 and + getting back `23' + + SNMP::Info will ask for `RFC1213-MIB::ifType' and will get back + `ppp'. + + 2. SNMP::Info is easily extended to new devices + You can create a new subclass for a device by providing four hashes + : %GLOBALS, %MIBS, %FUNCS, and %MUNGE. + + Or you can override any existing methods from a parent class by + making a short subroutine. + + See the section EXTENDING SNMP::INFO for more details. + + When you make a new subclass for a device, please be sure to send it + back to the developers (via Source Forge or the mailing list) for + inclusion in the next version. + +SUBCLASSES + These are the subclasses that implement MIBs and support devices: + + Required MIBs not included in the install instructions above are noted + here. + + MIB Subclasses + These subclasses implement method to access one or more MIBs. These are + not used directly, but rather inherited from device subclasses. + + For more info run `perldoc' on any of the following module names. + + SNMP::Info::AdslLine + SNMP Interface to the ADSL-LINE-MIB for ADSL interfaces. + + Requires the ADSL-LINE-MIB, down loadable from Cisco. + + See documentation in SNMP::Info::AdslLine for details. + + SNMP::Info::Aggregate + SNMP Interface to IF-MIB `ifStackTable' Aggregated Links + + See documentation in SNMP::Info::Aggregate for details. + + SNMP::Info::Airespace + AIRESPACE-WIRELESS-MIB and AIRESPACE-SWITCHING-MIB. Inherited by + devices based on the Airespace wireless platform. + + See documentation in SNMP::Info::Airespace for details. + + SNMP::Info::AMAP + ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB. Alcatel Mapping Adjacency + Protocol (AMAP) Support. + + See documentation in SNMP::Info::AMAP for details. + + SNMP::Info::Bridge + BRIDGE-MIB (RFC1286). QBRIDGE-MIB. Inherited by devices with Layer2 + support. + + See documentation in SNMP::Info::Bridge for details. + + SNMP::Info::CiscoAgg + SNMP Interface to Cisco Aggregated Links + + See documentation in SNMP::Info::CiscoAgg for details. + + SNMP::Info::CDP + CISCO-CDP-MIB. Cisco Discovery Protocol (CDP) Support. Inherited by + Cisco, Enterasys, and HP devices. + + See documentation in SNMP::Info::CDP for details. + + SNMP::Info::CiscoConfig + CISCO-CONFIG-COPY-MIB, CISCO-FLASH-MIB, and OLD-CISCO-SYS-MIB. These + OIDs facilitate the writing of configuration files. + + See documentation in SNMP::Info::CiscoConfig for details. + + SNMP::Info::CiscoPortSecurity + CISCO-PORT-SECURITY-MIB and CISCO-PAE-MIB. + + See documentation in SNMP::Info::CiscoPortSecurity for details. + + SNMP::Info::CiscoPower + CISCO-POWER-ETHERNET-EXT-MIB. + + See documentation in SNMP::Info::CiscoPower for details. + + SNMP::Info::CiscoQOS + CISCO-CLASS-BASED-QOS-MIB. A collection of OIDs providing + information about a Cisco device's QOS config. + + See documentation in SNMP::Info::CiscoQOS for details. + + SNMP::Info::CiscoRTT + CISCO-RTTMON-MIB. A collection of OIDs providing information about a + Cisco device's RTT values. + + See documentation in SNMP::Info::CiscoRTT for details. + + SNMP::Info::CiscoStack + CISCO-STACK-MIB. + + See documentation in SNMP::Info::CiscoStack for details. + + SNMP::Info::CiscoStpExtensions + CISCO-STP-EXTENSIONS-MIB + + See documentation in SNMP::Info::CiscoStpExtensions for details. + + SNMP::Info::CiscoStats + OLD-CISCO-CPU-MIB, CISCO-PROCESS-MIB, and CISCO-MEMORY-POOL-MIB. + Provides common interfaces for memory, cpu, and os statistics for + Cisco devices. + + See documentation in SNMP::Info::CiscoStats for details. + + SNMP::Info::CiscoVTP + CISCO-VTP-MIB, CISCO-VLAN-MEMBERSHIP-MIB, + CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB + + See documentation in SNMP::Info::CiscoVTP for details. + + SNMP::Info::EDP + Extreme Discovery Protocol. EXTREME-EDP-MIB + + See documentation in SNMP::Info::EDP for details. + + SNMP::Info::Entity + ENTITY-MIB. Used for device info in Cisco and other vendors. + + See documentation in SNMP::Info::Entity for details. + + SNMP::Info::EtherLike + EtherLike-MIB (RFC1398) - Some Layer3 devices implement this MIB, as + well as some Aironet Layer 2 devices (non Cisco). + + See documentation in SNMP::Info::EtherLike for details. + + SNMP::Info::FDP + Foundry (Brocade) Discovery Protocol. FOUNDRY-SN-SWITCH-GROUP-MIB + + See documentation in SNMP::Info::FDP for details. + + SNMP::Info::IPv6 + SNMP Interface for obtaining configured IPv6 addresses and mapping + IPv6 addresses to MAC addresses and interfaces, using information + from IP-MIB, IPV6-MIB and/or CISCO-IETF-IP-MIB. + + See documentation in SNMP::Info::IPv6 for details. + + SNMP::Info::IEEE802dot11 + IEEE802dot11-MIB. A collection of OIDs providing information about + standards based 802.11 wireless devices. + + See documentation in SNMP::Info::IEEE802dot11 for details. + + SNMP::Info::IEEE802dot3ad + SNMP Interface to IEEE Aggregated Links. IEEE8023-LAG-MIB + + See documentation in SNMP::Info::IEEE802dot3ad for details. + + SNMP::Info::LLDP + LLDP-MIB, LLDP-EXT-DOT1-MIB, and LLDP-EXT-DOT3-MIB. Link Layer + Discovery Protocol (LLDP) Support. + + See documentation in SNMP::Info::LLDP for details. + + SNMP::Info::MAU + MAU-MIB (RFC2668). Some Layer2 devices use this for extended + Ethernet (Media Access Unit) interface information. + + See documentation in SNMP::Info::MAU for details. + + SNMP::Info::MRO + Method resolution introspection for SNMP::Info + + See documentation in SNMP::Info::MRO for details. + + SNMP::Info::NortelStack + S5-AGENT-MIB, S5-CHASSIS-MIB. + + See documentation in SNMP::Info::NortelStack for details. + + SNMP::Info::PowerEthernet + POWER-ETHERNET-MIB + + See documentation in SNMP::Info::PowerEthernet for details. + + SNMP::Info::RapidCity + RAPID-CITY. Inherited by Avaya switches for duplex and VLAN + information. + + See documentation in SNMP::Info::RapidCity for details. + + SNMP::Info::SONMP + SynOptics Network Management Protocol (SONMP) SYNOPTICS-ROOT-MIB, + S5-ETH-MULTISEG-TOPOLOGY-MIB. Inherited by + Avaya/Nortel/Bay/Synoptics switches and hubs. + + See documentation in SNMP::Info::SONMP for details. + + Device Subclasses + These subclasses inherit from one or more classes to provide a common + interface to data obtainable from network devices. + + All the required MIB files are included in the netdisco-mib package. + (See Above). + + SNMP::Info::Layer1 + Generic Layer1 Device subclass. + + See documentation in SNMP::Info::Layer1 for details. + + SNMP::Info::Layer1::Allied + Subclass for Allied Telesis Repeaters / Hubs. + + Requires ATI-MIB + + See documentation in SNMP::Info::Layer1::Allied for details. + + SNMP::Info::Layer1::Asante + Subclass for Asante 1012 Hubs. + + Requires ASANTE-HUB1012-MIB + + See documentation in SNMP::Info::Layer1::Asante for details. + + SNMP::Info::Layer1::Bayhub + Subclass for Nortel/Bay hubs. This includes System 5000, 100 + series, 200 series, and probably more. + + See documentation in SNMP::Info::Layer1::Bayhub for details. + + SNMP::Info::Layer1::Cyclades + Subclass for Cyclades terminal servers. + + See documentation in SNMP::Info::Layer1::Cyclades for details. + + SNMP::Info::Layer1::S3000 + Subclass for Bay/Synoptics hubs. This includes System 3000, + 281X, and probably more. + + See documentation in SNMP::Info::Layer1::S3000 for details. + + SNMP::Info::Layer2 + Generic Layer2 Device subclass. + + See documentation in SNMP::Info::Layer2 for details. + + SNMP::Info::Layer2::3Com + SNMP::Info::Layer2::3Com - SNMP Interface to L2 3Com Switches + + See documentation in SNMP::Info::Layer2::3Com for details. + + SNMP::Info::Layer2::Adtran + Subclass for Adtran devices. + + See documentation in SNMP::Info::Layer2::Adtran for details. + + SNMP::Info::Layer2::Airespace + Subclass for Cisco (Airespace) wireless controllers. + + See documentation in SNMP::Info::Layer2::Airespace for details. + + SNMP::Info::Layer2::Aironet + Class for Cisco Aironet wireless devices that run IOS. See also + Layer3::Aironet for Aironet devices that don't run IOS. + + See documentation in SNMP::Info::Layer2::Aironet for details. + + SNMP::Info::Layer2::Allied + Allied Telesis switches. + + See documentation in SNMP::Info::Layer2::Allied for details. + + SNMP::Info::Layer2::Baystack + Subclass for Avaya/Nortel/Bay Ethernet Switch/Baystack switches. + This includes 303, 304, 350, 380, 410, 420, 425, 450, 460, 470 + series, 2500 series, 4000 series, 5000 series, Business Ethernet + Switch (BES), Business Policy Switch (BPS), VSP 7000 series, and + probably others. + + See documentation in SNMP::Info::Layer2::Baystack for details. + + SNMP::Info::Layer2::Kentrox + Class for Kentrox DataSMART DSU/CSU. See + SNMP::Info::Layer2::Kentrox for details. + + SNMP::Info::Layer2::C1900 + Subclass for Cisco Catalyst 1900 and 1900c Devices running + CatOS. + + See documentation in SNMP::Info::Layer2::C1900 for details. + + SNMP::Info::Layer2::C2900 + Subclass for Cisco Catalyst 2900, 2950, 3500XL, and 3548 devices + running IOS. + + See documentation in SNMP::Info::Layer2::C2900 for details. + + SNMP::Info::Layer2::Catalyst + Subclass for Cisco Catalyst switches running CatOS. These + switches usually report a model number that starts with `wsc'. + Note that this class does not support everything that has the + name Catalyst. + + See documentation in SNMP::Info::Layer2::Catalyst for details. + + SNMP::Info::Layer2::Centillion + Subclass for Nortel/Bay Centillion and 5000BH ATM switches. + + See documentation in SNMP::Info::Layer2::Centillion for details. + + SNMP::Info::Layer2::Cisco + Generic Cisco subclass for layer 2 devices that are not yet + supported in more specific subclassesand the base layer 2 Cisco + class for other device specific layer 2 Cisco classes. + + See documentation in SNMP::Info::Layer2::Cisco for details. + + SNMP::Info::Layer2::CiscoSB + Subclass for Cisco's "Small Business" product line, acquired + from Linksys. This currently comprises the Sx300/500 line of + switches. + + See documentation in SNMP::Info::Layer2::CiscoSB for details. + + SNMP::Info::Layer2::HP + Subclass for more recent HP Procurve Switches + + Requires HP-ICF-OID and ENTITY-MIB downloaded from HP. + + See documentation in SNMP::Info::Layer2::HP for details. + + SNMP::Info::Layer2::HP4000 + Subclass for older HP Procurve Switches + + Requires HP-ICF-OID and ENTITY-MIB downloaded from HP. + + See documentation in SNMP::Info::Layer2::HP4000 for details. + + SNMP::Info::Layer2::HPVC + Subclass for HP Virtual Connect Switches + + See documentation in SNMP::Info::Layer2::HPVC for details. + + SNMP::Info::Layer2::N2270 + Subclass for Nortel 2270 wireless switches. + + See documentation in SNMP::Info::Layer2::N2270 for details. + + SNMP::Info::Layer2::NAP222x + Subclass for Nortel 222x series wireless access points. + + See documentation in SNMP::Info::Layer2::NAP222x for details. + + SNMP::Info::Layer2::Netgear + Subclass for Netgear switches + + See documentation in SNMP::Info::Layer2::Netgear for details. + + SNMP::Info::Layer2::NWSS2300 + SNMP Interface to Avaya (Trapeze) Wireless Controllers + + See documentation in SNMP::Info::Layer2::NWSS2300 for details. + + SNMP::Info::Layer2::Orinoco + Subclass for Orinoco/Proxim wireless access points. + + See documentation in SNMP::Info::Layer2::Orinoco for details. + + SNMP::Info::Layer2::Trapeze + SNMP Interface to Juniper (Trapeze) Wireless Controllers + + See documentation in SNMP::Info::Layer2::Trapeze for details. + + SNMP::Info::Layer2::Ubiquiti + SNMP Interface to Ubiquiti Access Points and other devices + + See documentation in SNMP::Info::Layer2::Ubiquiti for details. + + SNMP::Info::Layer2::ZyXEL_DSLAM + Zyxel DSLAMs. Need I say more? + + See documentation in SNMP::Info::Layer2::ZyXEL_DSLAM for + details. + + SNMP::Info::Layer3 + Generic Layer3 and Layer2+3 Device subclass. + + See documentation in SNMP::Info::Layer3 for details. + + SNMP::Info::Layer3::Aironet + Subclass for Cisco Aironet wireless access points (AP) not + running IOS. These are usually older devices. + + MIBs for these devices now included in v2.tar.gz available from + ftp.cisco.com. + + Note Layer2::Aironet + + See documentation in SNMP::Info::Layer3::Aironet for details. + + SNMP::Info::Layer3::AlcatelLucent + Alcatel-Lucent OmniSwitch Class. + + See documentation in SNMP::Info::Layer3::AlcatelLucent for + details. + + SNMP::Info::Layer3::AlteonAD + Subclass for Radware Alteon Series ADC switches and Nortel + BladeCenter Layer2-3 GbE Switch Modules. + + See documentation in SNMP::Info::Layer3::AlteonAD for details. + + SNMP::Info::Layer3::Altiga + See documentation in SNMP::Info::Layer3::Altiga for details. + + SNMP::Info::Layer3::Arista + See documentation in SNMP::Info::Layer3::Arista for details. + + SNMP::Info::Layer3::Aruba + Subclass for Aruba wireless switches. + + See documentation in SNMP::Info::Layer3::Aruba for details. + + SNMP::Info::Layer3::BayRS + Subclass for Avaya/Nortel/Bay Multiprotocol/BayRS routers. This + includes BCN, BLN, ASN, ARN, AN, 2430, and 5430 routers. + + See documentation in SNMP::Info::Layer3::BayRS for details. + + SNMP::Info::Layer3::BlueCoatSG + Subclass for Blue Coat SG series proxy devices. + + See documentation in SNMP::Info::Layer3::BlueCoatSG for details. + + SNMP::Info::Layer3::C3550 + Subclass for Cisco Catalyst 3550,3540,3560 2/3 switches running + IOS. + + See documentation in SNMP::Info::Layer3::C3550 for details. + + SNMP::Info::Layer3::C4000 + This class covers Catalyst 4000s and 4500s. + + See documentation in SNMP::Info::Layer3::C4000 for details. + + SNMP::Info::Layer3::C6500 + This class covers Catalyst 6500s in native mode, hybrid mode. + Catalyst 3750's, 2970's and probably others. + + See documentation in SNMP::Info::Layer3::C6500 for details. + + SNMP::Info::Layer3::CheckPoint + Subclass for CheckPoint devices + + See documentation in SNMP::Info::Layer3::CheckPoint for details. + + SNMP::Info::Layer3::Cisco + This is a simple wrapper around layer 3 for IOS devices and the + base layer 3 Cisco class for other device specific layer 3 Cisco + classes. + + See documentation in SNMP::Info::Layer3::Cisco for details. + + SNMP::Info::Layer3::CiscoASA + Subclass for Cisco Adaptive Security Appliances. + + See documentation in SNMP::Info::Layer3::CiscoASA for details. + + SNMP::Info::Layer3::CiscoFWSM + Subclass for Cisco Firewall Services Modules. + + See documentation in SNMP::Info::Layer3::CiscoFWSM for details. + + SNMP::Info::Layer3::CiscoSwitch + Base class for L3 Cisco switches. See documentation in + SNMP::Info::Layer3::CiscoSwitch for details. + + SNMP::Info::Layer3::Contivity + Subclass for Avaya/Nortel Contivity/VPN Routers. + + See documentation in SNMP::Info::Layer3::Contivity for details. + + SNMP::Info::Layer3::DLink + Subclass for DLink devices. + + See documentation in SNMP::Info::Layer3::DLink for details. + + SNMP::Info::Layer3::Dell + Subclass for Dell PowerConnect switches. D-Link, the IBM + BladeCenter Gigabit Ethernet Switch Module and some Linksys + switches also use this module based upon MIB support. + + See documentation in SNMP::Info::Layer3::Dell for details. + + SNMP::Info::Layer3::Enterasys + Subclass for Enterasys devices. + + See documentation in SNMP::Info::Layer3::Enterasys for details. + + SNMP::Info::Layer3::Extreme + Subclass for Extreme Networks switches. + + See documentation in SNMP::Info::Layer3::Extreme for details. + + SNMP::Info::Layer3::F5 + Subclass for F5 devices. + + See documentation in SNMP::Info::Layer3::F5 for details. + + SNMP::Info::Layer3::Force10 + Subclass for Force10 devices. + + See documentation in SNMP::Info::Layer3::Force10 for details. + + SNMP::Info::Layer3::Fortinet + Subclass for Fortinet devices. + + See documentation in SNMP::Info::Layer3::Fortinet for details. + + SNMP::Info::Layer3::Foundry + Subclass for Brocade (Foundry) Network devices. + + See documentation in SNMP::Info::Layer3::Foundry for details. + + SNMP::Info::Layer3::H3C + SNMP Interface to Layer 3 Devices, H3C & HP A-series. + + See documentation in SNMP::Info::Layer3::H3C for details. + + SNMP::Info::Layer3::HP9300 + Subclass for HP network devices which Foundry Networks was the + Original Equipment Manufacturer (OEM) such as the HP ProCurve + 9300 and 6300 series. + + See documentation in SNMP::Info::Layer3::HP9300 for details. + + SNMP::Info::Layer3::Huawei + SNMP Interface to Huawei Layer 3 switches and routers. + + See documentation in SNMP::Info::Layer3::Huawei for details. + + SNMP::Info::Layer3::IBMGbTor + SNMP Interface to IBM Rackswitch (formerly Blade Network + Technologies) network devices. + + See documentation in SNMP::Info::Layer3::IBMGbTor for details. + + SNMP::Info::Layer3::Juniper + Subclass for Juniper devices + + See documentation in SNMP::Info::Layer3::Juniper for details. + + SNMP::Info::Layer3::Lantronix + Subclass for Lantronix devices + + See documentation in SNMP::Info::Layer3::Lantronix for details. + + SNMP::Info::Layer3::Microsoft + Subclass for Generic Microsoft Routers running Microsoft Windows + OS. + + See documentation in SNMP::Info::Layer3::Microsoft for details. + + SNMP::Info::Layer3::Mikrotik + Subclass for Mikrotik devices running RouterOS. + + See documentation in SNMP::Info::Layer3::Mikrotik for details. + + SNMP::Info::Layer3::N1600 + Subclass for Avaya/Nortel Ethernet Routing Switch 1600 series. + + See documentation in SNMP::Info::Layer3::N1600 for details. + + SNMP::Info::Layer3::NetSNMP + Subclass for host systems running Net-SNMP. + + See documentation in SNMP::Info::Layer3::NetSNMP for details. + + SNMP::Info::Layer3::Netscreen + Subclass for Juniper NetScreen. + + See documentation in SNMP::Info::Layer3::Netscreen for details. + + SNMP::Info::Layer3::Nexus + Subclass for Cisco Nexus devices running NX-OS + + See documentation in SNMP::Info::Layer3::Nexus for details. + + SNMP::Info::Layer3::PacketFront + Subclass for PacketFront DRG series CPE. + + See documentation in SNMP::Info::Layer3::PacketFront for + details. + + SNMP::Info::Layer3::PaloAlto + Subclass for Palo Alto firewalls. + + See documentation in SNMP::Info::Layer3::PaloAlto for details. + + SNMP::Info::Layer3::Passport + Subclass for Avaya/Nortel Ethernet Routing Switch/Passport 8000 + series, Accelar, and VSP 9000 series switches. + + See documentation in SNMP::Info::Layer3::Passport for details. + + SNMP::Info::Layer3::Pf + Subclass for FreeBSD-Based Firewalls using Pf /Pf Sense + + See documentation in SNMP::Info::Layer3::Pf for details. + + SNMP::Info::Layer3::Pica8 + Subclass for Pica8 devices. + + See documentation in SNMP::Info::Layer3::Pica8 for details. + + SNMP::Info::Layer3::SonicWALL + Subclass for generic SonicWALL devices. See documentation in + SNMP::Info::Layer3::SonicWALL for details. + + SNMP::Info::Layer3::Steelhead + Subclass for Riverbed Steelhead WAN optimization appliances. See + documentation in SNMP::Info::Layer3::Steelhead for details. + + SNMP::Info::Layer3::Sun + Subclass for Generic Sun Routers running SunOS. + + See documentation in SNMP::Info::Layer3::Sun for details. + + SNMP::Info::Layer3::Tasman + Subclass for Avaya Secure Routers. + + See documentation in SNMP::Info::Layer3::Tasman for details. + + SNMP::Info::Layer3::Timetra + Alcatel-Lucent SR Class. + + See documentation in SNMP::Info::Layer3::Timetra for details. + + SNMP::Info::Layer3::VyOS + Subclass for VyOS routers. + + See documentation in SNMP::Info::Layer3::VyOS for details. + + SNMP::Info::Layer3::VMware + Subclass for VMware ESXi hosts. + + See documentation in SNMP::Info::Layer3::VMware for details. + + SNMP::Info::Layer7 + Generic Layer7 Devices. + + See documentation in SNMP::Info::Layer7 for details. + + SNMP::Info::Layer7::APC + SNMP Interface to APC UPS devices + + See documentation in SNMP::Info::Layer7::APC for details. + + SNMP::Info::Layer7::CiscoIPS + SNMP Interface to Cisco IPS devices + + See documentation in SNMP::Info::Layer7::Cisco IPS for details. + + SNMP::Info::Layer7::Netscaler + SNMP Interface to Citrix Netscaler appliances + + See documentation in SNMP::Info::Layer7::Netscaler for details. + + SNMP::Info::Layer7::Neoteris + SNMP Interface to Juniper SSL VPN appliances + + See documentation in SNMP::Info::Layer7::Neoteris for details. + +Thanks + Thanks for testing and coding help (in no particular order) to : + Alexander Barthel, Andy Ford, Alexander Hartmaier, Andrew Herrick, Alex + Kramarov, Bernhard Augenstein, Bradley Baetz, Brian Chow, Brian Wilson, + Carlos Vicente, Dana Watanabe, David Pinkoski, David Sieborger, Douglas + McKeown, Greg King, Ivan Auger, Jean-Philippe Luiggi, Jeroen van Ingen, + Justin Hunter, Kent Hamilton, Matthew Tuttle, Michael Robbert, Mike + Hunter, Nicolai Petri, Ralf Gross, Robert Kerr and people listed on the + Netdisco README! + +USAGE + Constructor + new() + Creates a new object and connects via SNMP::Session. + + my $info = new SNMP::Info( 'Debug' => 1, + 'AutoSpecify' => 1, + 'BigInt' => 1, + 'BulkWalk' => 1, + 'BulkRepeaters' => 20, + 'IgnoreNetSNMPConf' => 1, + 'LoopDetect' => 1, + 'DestHost' => 'myrouter', + 'Community' => 'public', + 'Version' => 2, + 'MibDirs' => ['dir1','dir2','dir3'], + ) or die; + + SNMP::Info Specific Arguments : + + AutoSpecify + Returns an object of a more specific device class + + (default 0, which means "off") + + BigInt + Return Math::BigInt objects for 64 bit counters. Sets on a + global scope, not object. + + (default 0, which means "off") + + BulkWalk + Set to `0' to turn off BULKWALK commands for SNMPv2 connections. + + Note that BULKWALK is turned off for Net-SNMP versions 5.1.x + because of a bug. + + (default 1, which means "on") + + BulkRepeaters + Set number of MaxRepeaters for BULKWALK operation. See `perldoc + SNMP' -> bulkwalk() for more info. + + (default 20) + + LoopDetect + Detects looping during getnext table column walks by comparing + IIDs for each instance. A loop is detected if the same IID is + seen more than once and the walk is aborted. Note: This will not + detect loops during a bulkwalk operation, Net-SNMP's internal + bulkwalk function must detect the loop. + + Set to `0' to turn off loop detection. + + (default 1, which means "on") + + IgnoreNetSNMPConf + Net-SNMP version 5.0 and higher read configuration files, + snmp.conf or snmp.local.conf, from /etc/snmp, /usr/share/snmp, + /usr/lib(64)/snmp, or $HOME/.snmp and uses those settings to + automatically parse MIB files, etc. + + Set to `1' "on" to ignore Net-SNMP configuration files by + overriding the `SNMPCONFPATH' environmental variable during + object initialization. Note: MibDirs must be defined or Net-SNMP + will not be able to load MIBs and initialize the object. + + (default 0, which means "off") + + Debug + Prints Lots of debugging messages. Pass 2 to print even more + debugging messages. + + (default 0, which means "off") + + DebugSNMP + Set $SNMP::debugging level for Net-SNMP. + + See SNMP for more details. + + MibDirs + Array ref to list of directories in which to look for MIBs. Note + this will be in addition to the ones setup in snmp.conf at the + system level. + + (default use net-snmp settings only) + + RetryNoSuch + When using SNMP Version 1, try reading values even if they come + back as "no such variable in this MIB". Set to false if so + desired. This feature lets you read SNMPv2 data from an SNMP + version 1 connection, and should probably be left on. + + (default 1, which means "on") + + Session + SNMP::Session object to use instead of connecting on own. + + (default creates session automatically) + + Offline + Causes SNMP::Info to avoid network activity and return data only + from its cache. If you ask for something not in the cache, an + error is thrown. See also the `cache()' and `offline()' methods. + + (default 0, which means "online") + + Cache + Pass in a HashRef to prime the cache of retrieved data. Useful + for creating an instance in `Offline' mode from a previously + dumped cache. See also the `cache()' method to retrieve a cache + after running actial queries. + + OTHER + All other arguments are passed to SNMP::Session. + + See SNMP::Session for a list of other possible arguments. + + A Note about the wrong Community string or wrong SNMP Version: + + If a connection is using the wrong community string or the wrong + SNMP version, the creation of the object will not fail. The device + still answers the call on the SNMP port, but will not return + information. Check the error() method after you create the device + object to see if there was a problem in connecting. + + A note about SNMP Versions : + + Some older devices don't support SNMP version 2, and will not return + anything when a connection under Version 2 is attempted. + + Some newer devices will support Version 1, but will not return all + the data they might have if you had connected under Version 1 + + When trying to get info from a new device, you may have to try + version 2 and then fallback to version 1. + + update() + Replace the existing session with a new one with updated values, + without re-identifying the device. The only supported changes are to + Community or Context. + + Clears the object cache. + + This is useful, e.g., when a device supports multiple contexts (via + changes to the Community string, or via the SNMPv3 Context + parameter), but a context that you want to access does not support + the objects (e.g., `sysObjectID', `sysDescr') that we use to + identify the device. + + Data is Cached + Methods and subroutines requesting data from a device will only load the + data once, and then return cached versions of that data. + + Run $info->load_METHOD() where method is something like 'i_name' to + reload data from a method. + + Run $info->clear_cache() to clear the cache to allow reload of both + globals and table methods. + + The cache can be retrieved or set using the $info->cache() method. This + works together with the `Offline' option. + + Object Scalar Methods + These are for package related data, not directly supplied from SNMP. + + $info->clear_cache() + Clears the cached data. This includes GLOBALS data and TABLE METHOD + data. + + $info->debug(1) + Returns current debug status, and optionally toggles debugging info + for this object. + + $info->offline([1|0]) + Returns if offline mode is currently turned on for this object. + + Optionally sets the Offline parameter. + + $info->cache([new_cache]) + Returns a HashRef of all cached data in this object. There will be a + `store' key for table data and then one key for each leaf. + + Optionally sets the cache parameters if passed a HashRef. + + $info->bulkwalk([1|0]) + Returns if bulkwalk is currently turned on for this object. + + Optionally sets the bulkwalk parameter. + + $info->loopdetect([1|0]) + Returns if loopdetect is currently turned on for this object. + + Optionally sets the loopdetect parameter. + + $info->device_type() + Returns the Subclass name for this device. `SNMP::Info' is returned + if no more specific class is available. + + First the device is checked for Layer 3 support and a specific + subclass, then Layer 2 support and subclasses are checked. + + This means that Layer 2 / 3 switches and routers will fall under the + SNMP::Info::Layer3 subclasses. + + If the device still can be connected to via SNMP::Info, then + SNMP::Info is returned. + + $info->error(no_clear) + Returns Error message if there is an error, or undef if there is + not. + + Reading the error will clear the error unless you set the no_clear + flag. + + $info->has_layer(3) + Returns non-zero if the device has the supplied layer in the OSI + Model + + Returns if the device doesn't support the layers() call. + + $info->snmp_comm() + Returns SNMP Community string used in connection. + + $info->snmp_ver() + Returns SNMP Version used for this connection + + $info->specify() + Returns an object of a more-specific subclass. + + my $info = new SNMP::Info(...); + # Returns more specific object type + $info = $info->specific(); + + Usually this method is called internally from new(AutoSpecify => 1) + + See device_type() entry for how a subclass is chosen. + + $info->cisco_comm_indexing() + Returns 0. Is an overridable method used for vlan indexing for snmp + calls on certain Cisco devices. + + See + ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityI + ndexing.html + + Globals (Scalar Methods) + These are methods to return scalar data from RFC1213. + + Some subset of these is probably available for any network device that + speaks SNMP. + + $info->uptime() + Uptime in hundredths of seconds since device became available. + + (`sysUpTime') + + $info->contact() + (`sysContact') + + $info->name() + (`sysName') + + $info->location() + (`sysLocation') + + $info->layers() + This returns a binary encoded string where each digit represents a + layer of the OSI model served by the device. + + eg: 01000010 means layers 2 (physical) and 7 (Application) + are served. + + Note: This string is 8 digits long. + + See $info->has_layer() + + (`sysServices') + + $info->ports() + Number of interfaces available on this device. + + Not too useful as the number of SNMP interfaces usually does not + correspond with the number of physical ports + + (`ifNumber') + + $info->ipforwarding() + The indication of whether the entity is acting as an IP gateway + + Returns either forwarding or not-forwarding + + (`ipForwarding') + + Table Methods + Each of these methods returns a hash_reference to a hash keyed on the + interface index in SNMP. + + Example : $info->interfaces() might return + + { '1.12' => 'FastEthernet/0', + '2.15' => 'FastEthernet/1', + '9.99' => 'FastEthernet/2' + } + + The key is what you would see if you were to do an snmpwalk, and in some + cases changes between reboots of the network device. + + Partial Table Fetches + If you want to get only a part of an SNMP table or a single instance + from the table and you know the IID for the part of the table that you + want, you can specify it in the call: + + $local_routes = $info->ipr_route('192.168.0'); + + This will only fetch entries in the table that start with `192.168.0', + which in this case are routes on the local network. + + Remember that you must supply the partial IID (a numeric OID). + + Partial table results are not cached. + + Interface Information + $info->interfaces() + This methods is overridden in each subclass to provide a mapping + between the Interface Table Index (iid) and the physical port name. + + $info->if_ignore() + Returns a reference to a hash where key values that exist are + interfaces to ignore. + + Ignored interfaces are ones that are usually not physical ports or + Virtual Lans (VLANs) such as the Loopback interface, or the CPU + interface. + + $info->bulkwalk_no() + Returns 0. Is an overridable method used for turn off bulkwalk for + the device class. + + $info->i_index() + Default SNMP IID to Interface index. + + (`ifIndex') + + $info->i_description() + Description of the interface. Usually a little longer single word + name that is both human and machine friendly. Not always. + + (`ifDescr') + + $info->i_type() + Interface type, such as Vlan, Ethernet, Serial + + (`ifType') + + $info->i_mtu() + INTEGER. Interface MTU value. + + (`ifMtu') + + $info->i_speed() + Speed of the link, human format. See munge_speed() later in document + for details. + + (`ifSpeed', `ifHighSpeed' if necessary) + + $info->i_speed_raw() + Speed of the link in bits per second without munging. If + i_speed_high is available it will be used and multiplied by + 1_000_000. + + (`ifSpeed', `ifHighSpeed' if necessary) + + $info->i_speed_high() + Speed of a high-speed link, human format. See munge_highspeed() + later in document for details. You should not need to call this + directly, as i_speed() will call it if it needs to. + + (`ifHighSpeed') + + $info->i_mac() + MAC address of the interface. Note this is just the MAC of the port, + not anything connected to it. + + (`ifPhysAddress') + + $info->i_up() + Link Status of the interface. Typical values are 'up' and 'down'. + + (`ifOperStatus') + + $info->i_up_admin() + Administrative status of the port. Typical values are 'enabled' and + 'disabled'. + + (`ifAdminStatus') + + $info->i_lastchange() + The value of `sysUpTime' when this port last changed states + (up,down). + + (`ifLastChange') + + $info->i_name() + Interface Name field. Supported by a smaller subset of devices, this + fields is often human set. + + (`ifName') + + $info->i_alias() + Interface Name field. For certain devices this is a more human + friendly form of i_description(). For others it is a human set field + like i_name(). + + (`ifAlias') + + Interface Statistics + $info->i_octet_in(), $info->i_octets_out(), $info->i_octet_in64(), + $info->i_octets_out64() + Bandwidth. + + Number of octets sent/received on the interface including framing + characters. + + 64 bit version may not exist on all devices. + + NOTE: To manipulate 64 bit counters you need to use Math::BigInt, + since the values are too large for a normal Perl scalar. Set the + global $SNMP::Info::BIGINT to 1 , or pass the BigInt value to new() + if you want SNMP::Info to do it for you. + + (`ifInOctets') (`ifOutOctets') (`ifHCInOctets') (`ifHCOutOctets') + + $info->i_errors_in(), $info->i_errors_out() + Number of packets that contained an error preventing delivery. See + `IF-MIB' for more info. + + (`ifInErrors') (`ifOutErrors') + + $info->i_pkts_ucast_in(), $info->i_pkts_ucast_out(), + $info->i_pkts_ucast_in64(), $info->i_pkts_ucast_out64() + Number of packets not sent to a multicast or broadcast address. + + 64 bit version may not exist on all devices. + + (`ifInUcastPkts') (`ifOutUcastPkts') (`ifHCInUcastPkts') + (`ifHCOutUcastPkts') + + $info->i_pkts_nucast_in(), $info->i_pkts_nucast_out(), + Number of packets sent to a multicast or broadcast address. + + These methods are deprecated by i_pkts_multi_in() and + i_pkts_bcast_in() according to `IF-MIB'. Actual device usage may + vary. + + (`ifInNUcastPkts') (`ifOutNUcastPkts') + + $info->i_pkts_multi_in() $info->i_pkts_multi_out(), + $info->i_pkts_multi_in64(), $info->i_pkts_multi_out64() + Number of packets sent to a multicast address. + + 64 bit version may not exist on all devices. + + (`ifInMulticastPkts') (`ifOutMulticastPkts') (`ifHCInMulticastPkts') + (`ifHCOutMulticastPkts') + + $info->i_pkts_bcast_in() $info->i_pkts_bcast_out(), + $info->i_pkts_bcast_in64() $info->i_pkts_bcast_out64() + Number of packets sent to a broadcast address on an interface. + + 64 bit version may not exist on all devices. + + (`ifInBroadcastPkts') (`ifOutBroadcastPkts') (`ifHCInBroadcastPkts') + (`ifHCOutBroadcastPkts') + + $info->i_discards_in() $info->i_discards_out() + "The number of inbound packets which were chosen to be discarded + even though no errors had been detected to prevent their being + deliverable to a higher-layer protocol. One possible reason for + discarding such a packet could be to free up buffer space." + (`IF-MIB') + + (`ifInDiscards') (`ifOutDiscards') + + $info->i_bad_proto_in() + "For packet-oriented interfaces, the number of packets received via + the interface which were discarded because of an unknown or + unsupported protocol. For character-oriented or fixed-length + interfaces that support protocol multiplexing the number of + transmission units received via the interface which were discarded + because of an unknown or unsupported protocol. For any interface + that does not support protocol multiplexing, this counter will + always be 0." + + (`ifInUnknownProtos') + + $info->i_qlen_out() + "The length of the output packet queue (in packets)." + + (`ifOutQLen') + + $info->i_specific() + See `IF-MIB' for full description + + (`ifSpecific') + + IP Address Table + Each entry in this table is an IP address in use on this device. Usually + this is implemented in Layer3 Devices. + + $info->ip_index() + Maps the IP Table to the IID + + (`ipAdEntIfIndex') + + $info->ip_table() + Maps the Table to the IP address + + (`ipAdEntAddr') + + $info->ip_netmask() + Gives netmask setting for IP table entry. + + (`ipAdEntNetMask') + + $info->ip_broadcast() + Gives broadcast address for IP table entry. + + (`ipAdEntBcastAddr') + + IP Routing Table + $info->ipr_route() + The route in question. A value of 0.0.0.0 is the default gateway + route. + + (`ipRouteDest') + + $info->ipr_if() + The interface (IID) that the route is on. Use interfaces() to map. + + (`ipRouteIfIndex') + + $info->ipr_1() + Primary routing metric for this route. + + (`ipRouteMetric1') + + $info->ipr_2() + If metrics are not used, they should be set to -1 + + (`ipRouteMetric2') + + $info->ipr_3() + (`ipRouteMetric3') + + $info->ipr_4() + (`ipRouteMetric4') + + $info->ipr_5() + (`ipRouteMetric5') + + $info->ipr_dest() + From RFC1213: + + "The IP address of the next hop of this route. + (In the case of a route bound to an interface + which is realized via a broadcast media, the value + of this field is the agent's IP address on that + interface.)" + + (`ipRouteNextHop') + + $info->ipr_type() + From RFC1213: + + other(1), -- none of the following + invalid(2), -- an invalidated route + -- route to directly + direct(3), -- connected (sub-)network + -- route to a non-local + indirect(4) -- host/network/sub-network + + "The type of route. Note that the values + direct(3) and indirect(4) refer to the notion of + direct and indirect routing in the IP + architecture. + + Setting this object to the value invalid(2) has + the effect of invalidating the corresponding entry + in the ipRouteTable object. That is, it + effectively disassociates the destination + identified with said entry from the route + identified with said entry. It is an + implementation-specific matter as to whether the + agent removes an invalidated entry from the table. + Accordingly, management stations must be prepared + to receive tabular information from agents that + corresponds to entries not currently in use. + Proper interpretation of such entries requires + examination of the relevant ipRouteType object." + + (`ipRouteType') + + $info->ipr_proto() + From RFC1213: + + other(1), -- none of the following + -- non-protocol information, + -- e.g., manually configured + local(2), -- entries + -- set via a network + netmgmt(3), -- management protocol + -- obtained via ICMP, + icmp(4), -- e.g., Redirect + -- the remaining values are + -- all gateway routing + -- protocols + egp(5), + ggp(6), + hello(7), + rip(8), + is-is(9), + es-is(10), + ciscoIgrp(11), + bbnSpfIgp(12), + ospf(13), + bgp(14) + + (`ipRouteProto') + + $info->ipr_age() + Seconds since route was last updated or validated. + + (`ipRouteAge') + + $info->ipr_mask() + Subnet Mask of route. 0.0.0.0 for default gateway. + + (`ipRouteMask') + + $info->ipr_info() + Reference to MIB definition specific to routing protocol. + + (`ipRouteInfo') + + Topology Information + Based upon the manufacturer and software version devices may support + some combination of Layer 2 topology protocol information. SNMP::Info + supports querying Link Layer Discovery Protocol (LLDP), Cisco Discovery + Protocol (CDP), SynOptics/Bay/Nortel/Avaya Network Management Protocol + (SONMP), Foundry/Brocade Discovery Protocol (FDP), Extreme Discovery + Protocol (EDP), and Alcatel Mapping Adjacency Protocol (AMAP). + + For protocol specific information and implementation: + + LLDP: See SNMP::Info::LLDP for details. + CDP: See SNMP::Info::CDP for details. + SONMP: See SNMP::Info::SONMP for details. + FDP: See SNMP::Info::FDP for details. + EDP: See SNMP::Info::EDP for details. + AMAP: See SNMP::Info::AMAP for details. + + Topology Capabilities + $info->has_topo() + Reports Layer 2 topology protocols which are supported and running + on a device. + + Returns either a reference to an array of protocols, possible values + being: `lldp', `cdp', `sonmp', `fdp', `edp', `amap' or `undef' if no + protocols are supported or running. + + Common Topology Table Information + The common topology table methods below will query the device for + information from the specified topology protocols and return a single + hash combining all information. As a result, there may be identical + topology information returned from the two protocols causing duplicate + entries. It is the calling program's responsibility to identify any + duplicate entries and remove duplicates if necessary. If it is necessary + to understand which protocol provided the information, utilize the + protocol specific methods directly rather than the generic methods. + + The methods support partial table fetches by providing a partial as the + first argument. + + If a reference to an array is provided as the second argument, those + protocols will be queried for information. The supported array values + are: `lldp', `cdp', `sonmp', `fdp', `edp', `amap'. + + If nothing is passed in as the second argument, the methods will call + has_topo() to determine supported and running topology protocols on the + device. + + $info->c_ip(partial, topology_protocol_arrayref) + Returns reference to hash. Key: iid, Value: remote IPv4 address + + If multiple entries exist with the same local port, c_if(), with the + same IPv4 address, c_ip(), it may be a duplicate entry. + + If multiple entries exist with the same local port, c_if(), with + different IPv4 addresses, c_ip(), there is either a device in + between two or more devices utilizing a different topology protocol + or multiple devices which are not directly connected. + + Use the protocol specific methods to dig deeper. + + $info->c_if(partial, topology_protocol_arrayref) + Returns reference to hash. Key: iid, Value: local device port + (interfaces) + + $info->c_port(partial, topology_protocol_arrayref) + Returns reference to hash. Key: iid, Value: remote port (interfaces) + + $info->c_id(partial, topology_protocol_arrayref) + Returns reference to hash. Key: iid, Value: string value used to + identify the chassis component associated with the remote system. + + Note: SONMP does not return this information. + + $info->c_platform(partial, topology_protocol_arrayref) + Returns reference to hash. Key: iid, Value: Remote Device Type + + Note: EDP does not provide this information. LLDP uses + (`lldpRemSysDesc') or `lldp_rem_sysname' as the closest match. + + $info->c_cap(partial, topology_protocol_arrayref) + Returns reference to hash of arrays. Key: iid, Value: Array of + capabilities supported by the device. See the specific protocol + class for string values which could be elements within the array. + + Note: Only CDP and LLDP support this method. + +SETTING DATA VIA SNMP + This section explains how to use SNMP::Info to do SNMP Set operations. + + $info->set_METHOD($value) + Sets the global METHOD to value. Assumes that iid is .0 + + Returns if failed, or the return value from SNMP::Session::set() + (snmp_errno) + + $info->set_location("Here!"); + + $info->set_METHOD($value,$iid) + Table Methods. Set iid of method to value. + + Returns if failed, or the return value from SNMP::Session::set() + (snmp_errno) + + # Disable a port administratively + my %if_map = reverse %{$info->interfaces()} + $info->set_i_up_admin('down', $if_map{'FastEthernet0/0'}) + or die "Couldn't disable the port. ",$info->error(1); + + NOTE: You must be connected to your device with a `ReadWrite' community + string in order for set operations to work. + + NOTE: This will only set data listed in %FUNCS and %GLOBALS. For data + acquired from overridden methods (subroutines) specific set_METHOD() + subroutines will need to be added if they haven't been already. + +Quiet Mode + SNMP::Info will not chirp anything to STDOUT unless there is a serious + error (in which case it will probably die). + + To get lots of debug info, set the Debug flag when calling new() or call + $info->debug(1); + + When calling a method check the return value. If the return value is + undef then check $info->error() + + Beware, calling $info->error() clears the error. + + my $name = $info->name() or die "Couldn't get sysName!" . $name->error(); + +EXTENDING SNMP::INFO + To support a new class (vendor or platform) of device, add a Perl + package with the data structures and methods listed below. + + If this seems a little scary, then the SNMP::Info developers are usually + happy to accept the SNMP data from your device and make an attempt at + the class themselves. Usually a "beta" release will go to CPAN for you + to verify the implementation. + + Gathering MIB data for SNMP::Info Developers + The preference is to open a feature request in the SourceForge project. + This allows all developers to have visibility into the request. Please + include pointers to the applicable platform MIBs. For development we + will need an `snmpwalk' of the device. There is a tool now included in + the SNMP::Info distribution to help with this task, although you'll most + likely need to download the distribution from CPAN as it's included in + the "`contrib/util'" directory. + + The utility is named `make_snmpdata.pl'. Run it with a command line + like: + + ./make_snmpdata.pl -c community -i -d device_ip \ + -m /home/netdisco-mibs/rfc:/home/netdisco-mibs/net-snmp:/home/netdisco-mibs/dir3 \ + SNMPv2-MIB IF-MIB EtherLike-MIB BRIDGE-MIB Q-BRIDGE-MIB ENTITY-MIB \ + POWER-ETHERNET-MIB IPV6-MIB LLDP-MIB DEVICE-SPECIFIC-MIB-NAME(s) > output.txt + + This will print to the file every MIB entry with data in a format that + the developers can use to emulate read operations without needing access + to the device. Preference would be to mask any sensitive data in the + output, zip the file, and upload as an attachment to the Sourceforge + tracker. However, if you do not feel comfortable uploading the output to + the tracker you could e-mail it to the developer that has claimed the + ticket. + + Data Structures required in new Subclass + A class inheriting this class must implement these data structures : + + $INIT + Used to flag if the MIBs have been loaded yet. + + %GLOBALS + Contains a hash in the form ( method_name => SNMP MIB leaf name ) + These are scalar values such as name, uptime, etc. + + To resolve MIB leaf name conflicts between private MIBs, you may + prefix the leaf name with the MIB replacing each - (dash) and : + (colon) with an _ (underscore). For example, + ALTEON_TIGON_SWITCH_MIB__agSoftwareVersion would be used as the hash + value instead of the net-snmp notation + ALTEON-TIGON-SWITCH-MIB::agSoftwareVersion. + + When choosing the name for the methods, be aware that other new Sub + Modules might inherit this one to get it's features. Try to choose a + prefix for methods that will give it's own name space inside the + SNMP::Info methods. + + %FUNCS + Contains a hash in the form ( method_name => SNMP MIB leaf name) + These are table entries, such as the `ifIndex' + + To resolve MIB leaf name conflicts between private MIBs, you may + prefix the leaf name with the MIB replacing each - (dash) and : + (colon) with an _ (underscore). For example, + ALTEON_TS_PHYSICAL_MIB__agPortCurCfgPortName would be used as the + hash value instead of the net-snmp notation + ALTEON-TS-PHYSICAL-MIB::agPortCurCfgPortName. + + %MIBS + A list of each mib needed. + + ('MIB-NAME' => 'itemToTestForPresence') + + The value for each entry should be a MIB object to check for to make + sure that the MIB is present and has loaded correctly. + + $info->init() will throw an exception if a MIB does not load. + + %MUNGE + A map between method calls (from %FUNCS or %GLOBALS) and subroutine + methods. The subroutine called will be passed the data as it gets it + from SNMP and it should return that same data in a more human + friendly format. + + Sample %MUNGE: + + (my_ip => \&munge_ip, + my_mac => \&munge_mac, + my_layers => \&munge_dec2bin + ) + + Sample Subclass + Let's make a sample Layer 2 Device subclass. This class will inherit the + Cisco Vlan module as an example. + + ----------------------- snip -------------------------------- + + # SNMP::Info::Layer2::Sample + + package SNMP::Info::Layer2::Sample; + + $VERSION = 0.1; + + use strict; + + use Exporter; + use SNMP::Info::Layer2; + use SNMP::Info::CiscoVTP; + + @SNMP::Info::Layer2::Sample::ISA = qw/SNMP::Info::Layer2 + SNMP::Info::CiscoVTP Exporter/; + @SNMP::Info::Layer2::Sample::EXPORT_OK = qw//; + + use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/; + + %MIBS = (%SNMP::Info::Layer2::MIBS, + %SNMP::Info::CiscoVTP::MIBS, + 'SUPER-DOOPER-MIB' => 'supermibobject' + ); + + %GLOBALS = (%SNMP::Info::Layer2::GLOBALS, + %SNMP::Info::CiscoVTP::GLOBALS, + 'name' => 'supermib_supername', + 'favorite_color' => 'supermib_fav_color_object', + 'favorite_movie' => 'supermib_fav_movie_val' + ); + + %FUNCS = (%SNMP::Info::Layer2::FUNCS, + %SNMP::Info::CiscoVTP::FUNCS, + # Super Dooper MIB - Super Hero Table + 'super_hero_index' => 'SuperHeroIfIndex', + 'super_hero_name' => 'SuperHeroIfName', + 'super_hero_powers' => 'SuperHeroIfPowers' + ); + + %MUNGE = (%SNMP::Info::Layer2::MUNGE, + %SNMP::Info::CiscoVTP::MUNGE, + 'super_hero_powers' => \&munge_powers + ); + + # OverRide uptime() method from %SNMP::Info::GLOBALS + sub uptime { + my $sample = shift; + + my $name = $sample->name(); + + # this is silly but you get the idea + return '600' if defined $name ; + } + + # Create our own munge function + sub munge_powers { + my $power = shift; + + # Take the returned obscure value and return something useful. + return 'Fire' if $power =~ /reallyhot/i; + return 'Ice' if $power =~ /reallycold/i; + + # Else + return $power; + } + + # Copious Documentation here!!! + =head1 NAME + =head1 AUTHOR + =head1 SYNOPSIS + =head1 DESCRIPTION + =head2 Inherited Classes + =head2 Required MIBs + =head1 GLOBALS + =head2 Overrides + =head1 TABLE METHODS + =head2 Overrides + =cut + + 1; # don't forget this line + ----------------------- snip -------------------------------- + + Be sure and send the debugged version to + snmp-info-users@lists.sourceforge.net to be included in the next version + of SNMP::Info. + +SNMP::INFO INTERNALS + Object Namespace + Internal data is stored with bareword keys. For example $info->{debug} + + SNMP Data is stored or marked cached with keys starting with an + underscore. For example $info->{_name} is the cache for $info->name(). + + Cached Table data is stored in $info->store() and marked cached per + above. + + Package Globals + These set the default value for an object upon creation. + + $DEBUG + Default 0. Sends copious debug info to stdout. This global sets the + object's debug status in new() unless 'Debug' argument passed in + new(). Change objects' debug status with $info->debug(). + + $BIGINT + Default 0. Set to true to have 64 bit counters return Math::BigInt + objects instead of scalar string values. See note under Interface + Statistics about 64 bit values. + + $NOSUCH + Default 1. Set to false to disable RetryNoSuch option for + SNMP::Session. Or see method in new() to do it on an object scope. + + $REPEATERS + Default 20. MaxRepeaters for BULKWALK operations. See `perldoc SNMP' + for more info. Can change by passing BulkRepeaters option in new() + + Data Munging Callback Subroutines + munge_speed() + Makes human friendly speed ratings using %SPEED_MAP + + %SPEED_MAP = ( + '56000' => '56 kbps', + '64000' => '64 kbps', + '115000' => '115 kpbs', + '1500000' => '1.5 Mbps', + '1536000' => 'T1', + '1544000' => 'T1', + '2000000' => '2.0 Mbps', + '2048000' => '2.048 Mbps', + '3072000' => 'Dual T1', + '3088000' => 'Dual T1', + '4000000' => '4.0 Mbps', + '10000000' => '10 Mbps', + '11000000' => '11 Mbps', + '20000000' => '20 Mbps', + '16000000' => '16 Mbps', + '16777216' => '16 Mbps', + '44210000' => 'T3', + '44736000' => 'T3', + '45000000' => '45 Mbps', + '45045000' => 'DS3', + '46359642' => 'DS3', + '51850000' => 'OC-1', + '54000000' => '54 Mbps', + '64000000' => '64 Mbps', + '100000000' => '100 Mbps', + '200000000' => '200 Mbps', + '149760000' => 'ATM on OC-3', + '155000000' => 'OC-3', + '155519000' => 'OC-3', + '155520000' => 'OC-3', + '400000000' => '400 Mbps', + '599040000' => 'ATM on OC-12', + '622000000' => 'OC-12', + '622080000' => 'OC-12', + '1000000000' => '1.0 Gbps', + '2000000000' => '2.0 Gbps', + '2488000000' => 'OC-48', + ) + + Note: high speed interfaces (usually 1 Gbps or faster) have their + link speed in `ifHighSpeed'. i_speed() automatically determines + whether to use `ifSpeed' or `ifHighSpeed'; if the latter is used, + the value is munged by munge_highspeed(). SNMP::Info can return + speeds up to terabit levels this way. + + munge_highspeed() + Makes human friendly speed ratings for `ifHighSpeed' + + munge_ip() + Takes a binary IP and makes it dotted ASCII + + munge_mac() + Takes an octet stream (HEX-STRING) and returns a colon separated + ASCII hex string. + + munge_prio_mac() + Takes an 2-byte octet stream (HEX-STRING) and returns a colon + separated ASCII hex string. + + munge_prio_port() + Takes an 8-byte octet stream (HEX-STRING) and returns a colon + separated ASCII hex string. + + munge_octet2hex() + Takes a binary octet stream and returns an ASCII hex string + + munge_dec2bin() + Takes a binary char and returns its ASCII binary representation + + munge_bits + Takes a SNMP2 'BITS' field and returns the ASCII bit string + + munge_counter64 + If $BIGINT is set to true, then a Math::BigInt object is returned. + See Math::BigInt for details. + + munge_i_up + Net-SNMP tends to load `RFC1213-MIB' first, and so ignores the + updated enumeration for `ifOperStatus' in `IF-MIB'. This munge + handles the "newer" definitions for the enumeration in IF-MIB. + + TODO: Get the precedence of MIBs and overriding of MIB data in + Net-SNMP figured out. Heirarchy/precendence of MIBS in SNMP::Info. + + munge_port_list + Takes an octet string representing a set of ports and returns a + reference to an array of binary values each array element + representing a port. + + If the element has a value of '1', then that port is included in the + set of ports; the port is not included if it has a value of '0'. + + munge_null() + Removes control characters from a string + + munge_e_type() + Takes an OID and return the object name if the right MIB is loaded. + + Internally Used Functions + $info->init() + Used internally. Loads all entries in %MIBS. + + $info->args() + Returns a reference to the argument hash supplied to SNMP::Session + + $info->class() + Returns the class name of the object. + + $info->error_throw(error message) + Stores the error message for use by $info->error() + + If $info->debug() is true, then the error message is carped too. + + $info->funcs() + Returns a reference to the %FUNCS hash. + + $info->globals() + Returns a reference to the %GLOBALS hash. + + $info->mibs() + Returns a reference to the %MIBS hash. + + $info->munge() + Returns a reference of the %MUNGE hash. + + $info->nosuch() + Returns NoSuch value set or not in new() + + $info->session() + Gets or Sets the SNMP::Session object. + + $info->store(new_store) + Returns or sets hash store for Table functions. + + Store is a hash reference in this format : + + $info->store = { attribute => { iid => value , iid2 => value2, ... } + }; + + $info->_global() + Used internally by AUTOLOAD to create dynamic methods from %GLOBALS + or a single instance MIB Leaf node name from a loaded MIB. + + Example: $info->name() on the first call dispatches to AUTOLOAD() + which calls $info->_global('name') creating the method name(). + + These methods return data as a scalar. + + $info->_set(attr,val,iid,type) + Used internally by set_multi() to run an SNMP set command. When run + clears attr cache. + + Attr can be passed as either a scalar or a reference to an array or + array of arrays when used with set_multi(). + + Example: $info->set_name('dog',3) uses autoload to resolve to + $info->_set('name','dog',3); + + $info->_make_setter(val,iid) + Used internally by AUTOLOAD to create dynamic methods from either + %GLOBALS, %FUNCS, or a valid mib leaf from a loaded MIB which runs + an SNMP set command. When run clears the attribute cache. + + Example: $info->set_name('dog',3) dispatches to autoload to resolve + to $info->_set('name','dog',3) and _make_setter creates the + set_name() method. + + $info->set_multi(arrayref) + Used to run an SNMP set command on several new values in the one + request. Returns the result of $info->_set(method). + + Pass either a reference to a 4 element array [, , , + ] or a reference to an array of 4 element arrays to specify + multiple values. + + - One of the following forms: + 1) leaf identifier (e.g., C<'sysContact'>) + 2) An entry in either %FUNCS, %GLOBALS (e.g., 'contact') + - The dotted-decimal, instance identifier. For scalar MIB objects + use '0' + - The SNMP data value being set (e.g., 'netdisco') + - Optional as the MIB should be loaded. + + If one of the set assignments is invalid, then the request will be + rejected without applying any of the new values - regardless of the + order they appear in the list. + + Example: my $vlan_set = [ + ['qb_v_untagged',"$old_vlan_id","$old_untagged_portlist"], + ['qb_v_egress',"$new_vlan_id","$new_egress_portlist"], + ['qb_v_egress',"$old_vlan_id","$old_egress_portlist"], + ['qb_v_untagged',"$new_vlan_id","$new_untagged_portlist"], + ['qb_i_vlan',"$port","$new_vlan_id"], ]; + + $info->set_multi($vlan_set); + + $info->load_all() + Debugging routine. This does not include any overridden method or + method implemented by subroutine. + + Runs $info->load_METHOD() for each entry in $info->funcs(); + + Returns $info->store() -- See store() entry. + + Note return value has changed since version 0.3 + + $info->all() + Runs $info->load_all() once then returns $info->store(); + + Use $info->load_all() to reload the data. + + Note return value has changed since version 0.3 + + $info->_load_attr() + Used internally by AUTOLOAD to create dynamic methods from %FUNCS or + a MIB Leaf node name contained within a table of a loaded MIB. + + Supports partial table fetches and single instance table fetches. + See SNMP::Info. + + These methods return data as a reference to a hash. + + $info->_show_attr() + Used internally by AUTOLOAD to return data called by methods listed + in %FUNCS. + + $info->snmp_connect_ip(ip) + Returns true or false based upon snmp connectivity to an IP. + + modify_port_list(portlist,offset,replacement) + Replaces the specified bit in a port_list array and returns the + packed bitmask + + $info->_cache(attr, data) + Cache retrieved data so that if it's asked for again, we use the + cache instead of going back to Net-SNMP. Data is cached inside the + blessed hashref `$self'. + + Accepts the leaf and value (scalar, or hashref for a table). Does + not return anything useful. + + $info->_munge(attr, data) + Raw data returned from Net-SNMP might not be formatted correctly or + might have platform-specific bugs or mistakes. The MUNGE feature of + SNMP::Info allows for fixups to take place. + + Accepts the leaf and value (scalar, or hashref for a table) and + returns the raw or the munged data, as appropriate. That is, you do + not need to know whether MUNGE is installed, and it's safe to call + this method regardless. + + _validate_autoload_method(method) + Used internally by AUTOLOAD to validate that a dynamic method should + be created. Returns the OID of the MIB leaf node the method will get + or set. + + 1. Returns unless method is listed in %FUNCS, %GLOBALS, or is MIB + Leaf node name in a loaded MIB for given class. + 2. Translates the MIB Leaf node name to an OID. + 3. Checks to see if the method access type is allowed for the + resolved OID. Write access for set_ methods, read access for others. + + $info->can() + Overrides UNIVERSAL::can() so that objects will correctly report + their capabilities to include dynamic methods generated at run time + via AUTOLOAD. + + Calls parent can() first to see if method exists, if not validates + that a method should be created then dispatches to the appropriate + internal method for creation. The newly created method is inserted + into the symbol table returning to AUTOLOAD only for the initial + method call. + + Returns undef if the method does not exist and can not be created. + + AUTOLOAD + Each entry in either %FUNCS, %GLOBALS, or MIB Leaf node names present in + loaded MIBs are used by AUTOLOAD() to create dynamic methods. Generated + methods are inserted into the symbol table so that subsequent calls can + avoid AUTOLOAD() and dispatch directly. + + 1. Returns unless method is listed in %FUNCS, %GLOBALS, or is a MIB Leaf + node name in a loaded MIB for given class. + 2. If the method exists in %GLOBALS or is a single instance MIB Leaf + node name from a loaded MIB, _global() generates the method. + 3. If a set_ prefix is present _make_setter() generates the method. + 4. If the method exists in %FUNCS or is a MIB Leaf node name contained + within a table from a loaded MIB, _load_attr() generates the method. + 5. A load_ prefix forces reloading of data and does not use cached data. + 6. A _raw suffix returns data ignoring any munge routines. + + Override any dynamic method listed in %GLOBALS, %FUNCS, or MIB Leaf node + name a by creating a subroutine with the same name. + + For example to override $info->name() create `` sub name {...}'' in your + subclass. + +COPYRIGHT AND LICENSE + Changes from SNMP::Info Version 0.7 and on are: Copyright (c) 2003-2010 + Max Baker and SNMP::Info Developers All rights reserved. + + Original Code is: Copyright (c) 2002-2003, Regents of the University of + California All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither the name of the University of California, Santa Cruz nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/lib/SNMP/Info.pm b/lib/SNMP/Info.pm index f5907679..cb797e44 100644 --- a/lib/SNMP/Info.pm +++ b/lib/SNMP/Info.pm @@ -24,7 +24,7 @@ use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG %SPEED_MAP $NOSUCH $BIGINT $REPEATERS/; -$VERSION = '3.42'; +$VERSION = '3.43'; =head1 NAME @@ -32,7 +32,7 @@ SNMP::Info - OO Interface to Network devices and MIBs through SNMP =head1 VERSION -SNMP::Info - Version 3.42 +SNMP::Info - Version 3.43 =head1 AUTHOR diff --git a/lib/SNMP/Info/AMAP.pm b/lib/SNMP/Info/AMAP.pm index e6db3018..ba9dac2b 100644 --- a/lib/SNMP/Info/AMAP.pm +++ b/lib/SNMP/Info/AMAP.pm @@ -38,7 +38,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB' => 'aipAMAPRemDeviceType', ); diff --git a/lib/SNMP/Info/AdslLine.pm b/lib/SNMP/Info/AdslLine.pm index c0a59814..55c07083 100644 --- a/lib/SNMP/Info/AdslLine.pm +++ b/lib/SNMP/Info/AdslLine.pm @@ -38,7 +38,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'ADSL-LINE-MIB' => 'adslLineType' ); diff --git a/lib/SNMP/Info/Aggregate.pm b/lib/SNMP/Info/Aggregate.pm index 734c9bda..9ca66dc4 100644 --- a/lib/SNMP/Info/Aggregate.pm +++ b/lib/SNMP/Info/Aggregate.pm @@ -38,7 +38,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = (); # IF-MIB diff --git a/lib/SNMP/Info/Airespace.pm b/lib/SNMP/Info/Airespace.pm index 8e2b4418..9f030254 100644 --- a/lib/SNMP/Info/Airespace.pm +++ b/lib/SNMP/Info/Airespace.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Bridge.pm b/lib/SNMP/Info/Bridge.pm index 32604c50..7f4960e4 100644 --- a/lib/SNMP/Info/Bridge.pm +++ b/lib/SNMP/Info/Bridge.pm @@ -42,7 +42,7 @@ use SNMP::Info; use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'BRIDGE-MIB' => 'dot1dBaseBridgeAddress', diff --git a/lib/SNMP/Info/CDP.pm b/lib/SNMP/Info/CDP.pm index 412eafbf..2b73b850 100644 --- a/lib/SNMP/Info/CDP.pm +++ b/lib/SNMP/Info/CDP.pm @@ -43,7 +43,7 @@ use SNMP::Info; use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT %CDP_CAPABILITIES/; -$VERSION = '3.42'; +$VERSION = '3.43'; # Five data structures required by SNMP::Info %MIBS = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' ); diff --git a/lib/SNMP/Info/CiscoAgg.pm b/lib/SNMP/Info/CiscoAgg.pm index ec243084..63b521ed 100644 --- a/lib/SNMP/Info/CiscoAgg.pm +++ b/lib/SNMP/Info/CiscoAgg.pm @@ -43,7 +43,7 @@ use SNMP::Info::IEEE802dot3ad 'agg_ports_lag'; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::IEEE802dot3ad::MIBS, diff --git a/lib/SNMP/Info/CiscoConfig.pm b/lib/SNMP/Info/CiscoConfig.pm index 30d8dc41..3f92c9f3 100644 --- a/lib/SNMP/Info/CiscoConfig.pm +++ b/lib/SNMP/Info/CiscoConfig.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-CONFIG-COPY-MIB' => 'ccCopyTable', diff --git a/lib/SNMP/Info/CiscoPortSecurity.pm b/lib/SNMP/Info/CiscoPortSecurity.pm index ba5b5fcb..3c37cfbb 100644 --- a/lib/SNMP/Info/CiscoPortSecurity.pm +++ b/lib/SNMP/Info/CiscoPortSecurity.pm @@ -38,7 +38,7 @@ use Exporter; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PAECAPABILITIES/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-PORT-SECURITY-MIB' => 'ciscoPortSecurityMIB', diff --git a/lib/SNMP/Info/CiscoPower.pm b/lib/SNMP/Info/CiscoPower.pm index 62da7e80..cf23b3b3 100644 --- a/lib/SNMP/Info/CiscoPower.pm +++ b/lib/SNMP/Info/CiscoPower.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-POWER-ETHERNET-EXT-MIB' => 'cpeExtPsePortEntPhyIndex', 'CISCO-CDP-MIB' => 'cdpCachePowerConsumption' ); diff --git a/lib/SNMP/Info/CiscoQOS.pm b/lib/SNMP/Info/CiscoQOS.pm index 1b839837..8c7ff6b0 100644 --- a/lib/SNMP/Info/CiscoQOS.pm +++ b/lib/SNMP/Info/CiscoQOS.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-CLASS-BASED-QOS-MIB' => 'cbQosIfIndex', ); diff --git a/lib/SNMP/Info/CiscoRTT.pm b/lib/SNMP/Info/CiscoRTT.pm index 191ac50e..e78bcc80 100644 --- a/lib/SNMP/Info/CiscoRTT.pm +++ b/lib/SNMP/Info/CiscoRTT.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-RTTMON-MIB' => 'rttMonCtrlAdminOwner', ); diff --git a/lib/SNMP/Info/CiscoStack.pm b/lib/SNMP/Info/CiscoStack.pm index a3c1b2cc..abb6de76 100644 --- a/lib/SNMP/Info/CiscoStack.pm +++ b/lib/SNMP/Info/CiscoStack.pm @@ -38,7 +38,7 @@ use Exporter; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-STACK-MIB' => 'ciscoStackMIB', ); diff --git a/lib/SNMP/Info/CiscoStats.pm b/lib/SNMP/Info/CiscoStats.pm index 00f3a7ec..2ecaa03d 100644 --- a/lib/SNMP/Info/CiscoStats.pm +++ b/lib/SNMP/Info/CiscoStats.pm @@ -42,7 +42,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'SNMPv2-MIB' => 'sysDescr', diff --git a/lib/SNMP/Info/CiscoStpExtensions.pm b/lib/SNMP/Info/CiscoStpExtensions.pm index bb4af3e8..85756b7e 100644 --- a/lib/SNMP/Info/CiscoStpExtensions.pm +++ b/lib/SNMP/Info/CiscoStpExtensions.pm @@ -36,7 +36,7 @@ use SNMP::Info::Bridge; use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/; -$VERSION = '3.42'; +$VERSION = '3.43'; @SNMP::Info::CiscoStpExtensions::ISA = qw/SNMP::Info::Bridge SNMP::Info Exporter/; @SNMP::Info::CiscoStpExtensions::EXPORT_OK = qw//; diff --git a/lib/SNMP/Info/CiscoVTP.pm b/lib/SNMP/Info/CiscoVTP.pm index fb438fee..0272f834 100644 --- a/lib/SNMP/Info/CiscoVTP.pm +++ b/lib/SNMP/Info/CiscoVTP.pm @@ -41,7 +41,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'CISCO-VTP-MIB' => 'vtpVlanName', diff --git a/lib/SNMP/Info/EDP.pm b/lib/SNMP/Info/EDP.pm index 1c0fcf80..f8b12530 100644 --- a/lib/SNMP/Info/EDP.pm +++ b/lib/SNMP/Info/EDP.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'EXTREME-EDP-MIB' => 'extremeEdpPortIfIndex', diff --git a/lib/SNMP/Info/Entity.pm b/lib/SNMP/Info/Entity.pm index 883d4d77..98021cec 100644 --- a/lib/SNMP/Info/Entity.pm +++ b/lib/SNMP/Info/Entity.pm @@ -41,7 +41,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'ENTITY-MIB' => 'entPhysicalSerialNum' ); diff --git a/lib/SNMP/Info/EtherLike.pm b/lib/SNMP/Info/EtherLike.pm index c14a3efd..3fa898f9 100644 --- a/lib/SNMP/Info/EtherLike.pm +++ b/lib/SNMP/Info/EtherLike.pm @@ -41,7 +41,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'EtherLike-MIB' => 'etherMIB' ); diff --git a/lib/SNMP/Info/FDP.pm b/lib/SNMP/Info/FDP.pm index 998642f9..881ca33a 100644 --- a/lib/SNMP/Info/FDP.pm +++ b/lib/SNMP/Info/FDP.pm @@ -42,7 +42,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' ); diff --git a/lib/SNMP/Info/IEEE802dot11.pm b/lib/SNMP/Info/IEEE802dot11.pm index e3379706..105a4c12 100644 --- a/lib/SNMP/Info/IEEE802dot11.pm +++ b/lib/SNMP/Info/IEEE802dot11.pm @@ -38,7 +38,7 @@ use Exporter; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'IEEE802dot11-MIB' => 'dot11DesiredSSID', ); diff --git a/lib/SNMP/Info/IEEE802dot3ad.pm b/lib/SNMP/Info/IEEE802dot3ad.pm index 0fa2d38d..7c6fc942 100644 --- a/lib/SNMP/Info/IEEE802dot3ad.pm +++ b/lib/SNMP/Info/IEEE802dot3ad.pm @@ -43,7 +43,7 @@ use SNMP::Info::Aggregate; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Aggregate::MIBS, diff --git a/lib/SNMP/Info/IPv6.pm b/lib/SNMP/Info/IPv6.pm index ed6f9954..a0c3a4be 100644 --- a/lib/SNMP/Info/IPv6.pm +++ b/lib/SNMP/Info/IPv6.pm @@ -44,7 +44,7 @@ use constant { IPV6MIB => 3, }; -$VERSION = '3.42'; +$VERSION = '3.43'; diff --git a/lib/SNMP/Info/LLDP.pm b/lib/SNMP/Info/LLDP.pm index 6bbda66b..e53c39b9 100644 --- a/lib/SNMP/Info/LLDP.pm +++ b/lib/SNMP/Info/LLDP.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'LLDP-MIB' => 'lldpLocSysCapEnabled', diff --git a/lib/SNMP/Info/Layer1.pm b/lib/SNMP/Info/Layer1.pm index 35b40240..20322fd4 100644 --- a/lib/SNMP/Info/Layer1.pm +++ b/lib/SNMP/Info/Layer1.pm @@ -41,7 +41,7 @@ use SNMP::Info; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, 'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex' ); diff --git a/lib/SNMP/Info/Layer1/Allied.pm b/lib/SNMP/Info/Layer1/Allied.pm index 1de0ad7a..717cf337 100644 --- a/lib/SNMP/Info/Layer1/Allied.pm +++ b/lib/SNMP/Info/Layer1/Allied.pm @@ -41,7 +41,7 @@ use SNMP::Info::Layer1; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # Set for No CDP %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, 'root_ip' => 'actualIPAddr', ); diff --git a/lib/SNMP/Info/Layer1/Asante.pm b/lib/SNMP/Info/Layer1/Asante.pm index 05c48508..8d0c6087 100644 --- a/lib/SNMP/Info/Layer1/Asante.pm +++ b/lib/SNMP/Info/Layer1/Asante.pm @@ -41,7 +41,7 @@ use SNMP::Info::Layer1; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # Set for No CDP %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, ); diff --git a/lib/SNMP/Info/Layer1/Bayhub.pm b/lib/SNMP/Info/Layer1/Bayhub.pm index 89d2bb9a..4e6a4759 100644 --- a/lib/SNMP/Info/Layer1/Bayhub.pm +++ b/lib/SNMP/Info/Layer1/Bayhub.pm @@ -42,7 +42,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer1/Cyclades.pm b/lib/SNMP/Info/Layer1/Cyclades.pm index 7db35410..711c55d8 100644 --- a/lib/SNMP/Info/Layer1/Cyclades.pm +++ b/lib/SNMP/Info/Layer1/Cyclades.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer1; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer1::MIBS, diff --git a/lib/SNMP/Info/Layer1/S3000.pm b/lib/SNMP/Info/Layer1/S3000.pm index 3f7f5ff8..20d681cf 100644 --- a/lib/SNMP/Info/Layer1/S3000.pm +++ b/lib/SNMP/Info/Layer1/S3000.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer2.pm b/lib/SNMP/Info/Layer2.pm index a698a980..aef5e656 100644 --- a/lib/SNMP/Info/Layer2.pm +++ b/lib/SNMP/Info/Layer2.pm @@ -46,7 +46,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, %SNMP::Info::Bridge::MIBS, diff --git a/lib/SNMP/Info/Layer2/3Com.pm b/lib/SNMP/Info/Layer2/3Com.pm index 07ac68fa..3a42e6b3 100644 --- a/lib/SNMP/Info/Layer2/3Com.pm +++ b/lib/SNMP/Info/Layer2/3Com.pm @@ -11,7 +11,7 @@ use SNMP::Info::CDP; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::LLDP::MIBS, diff --git a/lib/SNMP/Info/Layer2/Adtran.pm b/lib/SNMP/Info/Layer2/Adtran.pm index ec03a3ae..cc2e62cc 100644 --- a/lib/SNMP/Info/Layer2/Adtran.pm +++ b/lib/SNMP/Info/Layer2/Adtran.pm @@ -11,7 +11,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # This will be filled in with the device's index into the EntPhysicalEntry # table by the serial() function. diff --git a/lib/SNMP/Info/Layer2/Airespace.pm b/lib/SNMP/Info/Layer2/Airespace.pm index 00c7f8f8..835a200f 100644 --- a/lib/SNMP/Info/Layer2/Airespace.pm +++ b/lib/SNMP/Info/Layer2/Airespace.pm @@ -40,7 +40,7 @@ use SNMP::Info::Airespace; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, %SNMP::Info::Bridge::MIBS, diff --git a/lib/SNMP/Info/Layer2/Aironet.pm b/lib/SNMP/Info/Layer2/Aironet.pm index 223e4ebc..6c74354b 100644 --- a/lib/SNMP/Info/Layer2/Aironet.pm +++ b/lib/SNMP/Info/Layer2/Aironet.pm @@ -49,7 +49,7 @@ use SNMP::Info::IEEE802dot11; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %GLOBALS = ( %SNMP::Info::IEEE802dot11::GLOBALS, diff --git a/lib/SNMP/Info/Layer2/Allied.pm b/lib/SNMP/Info/Layer2/Allied.pm index dbd7ea31..8850050c 100644 --- a/lib/SNMP/Info/Layer2/Allied.pm +++ b/lib/SNMP/Info/Layer2/Allied.pm @@ -40,7 +40,7 @@ use SNMP::Info::Layer1; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS ); diff --git a/lib/SNMP/Info/Layer2/Baystack.pm b/lib/SNMP/Info/Layer2/Baystack.pm index 67803f0d..27ef5962 100644 --- a/lib/SNMP/Info/Layer2/Baystack.pm +++ b/lib/SNMP/Info/Layer2/Baystack.pm @@ -46,7 +46,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::LLDP::MIBS, diff --git a/lib/SNMP/Info/Layer2/C1900.pm b/lib/SNMP/Info/Layer2/C1900.pm index 9f74b708..c25206df 100644 --- a/lib/SNMP/Info/Layer2/C1900.pm +++ b/lib/SNMP/Info/Layer2/C1900.pm @@ -48,7 +48,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS, diff --git a/lib/SNMP/Info/Layer2/C2900.pm b/lib/SNMP/Info/Layer2/C2900.pm index ff33f3b3..3daac38e 100644 --- a/lib/SNMP/Info/Layer2/C2900.pm +++ b/lib/SNMP/Info/Layer2/C2900.pm @@ -41,7 +41,7 @@ use SNMP::Info::Layer2::Cisco; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %GLOBALS = ( %SNMP::Info::Layer2::Cisco::GLOBALS, diff --git a/lib/SNMP/Info/Layer2/Catalyst.pm b/lib/SNMP/Info/Layer2/Catalyst.pm index c9d2ac2f..89cd1a44 100644 --- a/lib/SNMP/Info/Layer2/Catalyst.pm +++ b/lib/SNMP/Info/Layer2/Catalyst.pm @@ -42,7 +42,7 @@ use SNMP::Info::Layer2::Cisco; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::Cisco::MIBS, diff --git a/lib/SNMP/Info/Layer2/Centillion.pm b/lib/SNMP/Info/Layer2/Centillion.pm index 4cbf3a37..515cfb98 100644 --- a/lib/SNMP/Info/Layer2/Centillion.pm +++ b/lib/SNMP/Info/Layer2/Centillion.pm @@ -43,7 +43,7 @@ use SNMP::Info::SONMP; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Layer2/Cisco.pm b/lib/SNMP/Info/Layer2/Cisco.pm index 4010e21b..77c177b1 100644 --- a/lib/SNMP/Info/Layer2/Cisco.pm +++ b/lib/SNMP/Info/Layer2/Cisco.pm @@ -52,7 +52,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer2/CiscoSB.pm b/lib/SNMP/Info/Layer2/CiscoSB.pm index 8c424afb..a77c46f2 100644 --- a/lib/SNMP/Info/Layer2/CiscoSB.pm +++ b/lib/SNMP/Info/Layer2/CiscoSB.pm @@ -50,7 +50,7 @@ use SNMP::Info::CDP; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS, diff --git a/lib/SNMP/Info/Layer2/HP.pm b/lib/SNMP/Info/Layer2/HP.pm index ad981b2e..375ce9ba 100644 --- a/lib/SNMP/Info/Layer2/HP.pm +++ b/lib/SNMP/Info/Layer2/HP.pm @@ -50,7 +50,7 @@ use SNMP::Info::Aggregate 'agg_ports_ifstack'; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer2/HP4000.pm b/lib/SNMP/Info/Layer2/HP4000.pm index ffe5e405..91141340 100644 --- a/lib/SNMP/Info/Layer2/HP4000.pm +++ b/lib/SNMP/Info/Layer2/HP4000.pm @@ -44,7 +44,7 @@ use SNMP::Info::CDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer2/HPVC.pm b/lib/SNMP/Info/Layer2/HPVC.pm index 5b064bf9..2ad0cf4d 100644 --- a/lib/SNMP/Info/Layer2/HPVC.pm +++ b/lib/SNMP/Info/Layer2/HPVC.pm @@ -41,7 +41,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer2/Kentrox.pm b/lib/SNMP/Info/Layer2/Kentrox.pm index 10a4a42a..9a8704b0 100644 --- a/lib/SNMP/Info/Layer2/Kentrox.pm +++ b/lib/SNMP/Info/Layer2/Kentrox.pm @@ -36,7 +36,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer2/N2270.pm b/lib/SNMP/Info/Layer2/N2270.pm index d9d71a59..230c41cd 100644 --- a/lib/SNMP/Info/Layer2/N2270.pm +++ b/lib/SNMP/Info/Layer2/N2270.pm @@ -43,7 +43,7 @@ use SNMP::Info::Airespace; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, %SNMP::Info::Bridge::MIBS, diff --git a/lib/SNMP/Info/Layer2/NAP222x.pm b/lib/SNMP/Info/Layer2/NAP222x.pm index c9b94a10..0924d9eb 100644 --- a/lib/SNMP/Info/Layer2/NAP222x.pm +++ b/lib/SNMP/Info/Layer2/NAP222x.pm @@ -42,7 +42,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::IEEE802dot11::MIBS, diff --git a/lib/SNMP/Info/Layer2/NWSS2300.pm b/lib/SNMP/Info/Layer2/NWSS2300.pm index 9ff494e0..2d24a919 100644 --- a/lib/SNMP/Info/Layer2/NWSS2300.pm +++ b/lib/SNMP/Info/Layer2/NWSS2300.pm @@ -39,7 +39,7 @@ use SNMP::Info::Bridge; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Layer2/Netgear.pm b/lib/SNMP/Info/Layer2/Netgear.pm index a49335a9..d705c274 100644 --- a/lib/SNMP/Info/Layer2/Netgear.pm +++ b/lib/SNMP/Info/Layer2/Netgear.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # This will be filled in with the device's index into the EntPhysicalEntry # table by the serial() function. diff --git a/lib/SNMP/Info/Layer2/Orinoco.pm b/lib/SNMP/Info/Layer2/Orinoco.pm index 935ef437..9d400e78 100644 --- a/lib/SNMP/Info/Layer2/Orinoco.pm +++ b/lib/SNMP/Info/Layer2/Orinoco.pm @@ -41,7 +41,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer2/Trapeze.pm b/lib/SNMP/Info/Layer2/Trapeze.pm index 18696337..71d39b30 100644 --- a/lib/SNMP/Info/Layer2/Trapeze.pm +++ b/lib/SNMP/Info/Layer2/Trapeze.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Layer2/Ubiquiti.pm b/lib/SNMP/Info/Layer2/Ubiquiti.pm index 3a1134ae..d95d22bd 100644 --- a/lib/SNMP/Info/Layer2/Ubiquiti.pm +++ b/lib/SNMP/Info/Layer2/Ubiquiti.pm @@ -18,7 +18,7 @@ use SNMP::Info::Layer3; # only used in sub mac() use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, diff --git a/lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm b/lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm index 36196bf2..ee82cfcc 100644 --- a/lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm +++ b/lib/SNMP/Info/Layer2/ZyXEL_DSLAM.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer2; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # Set for No CDP %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS ); diff --git a/lib/SNMP/Info/Layer3.pm b/lib/SNMP/Info/Layer3.pm index 37cb4d9e..cf03d32d 100644 --- a/lib/SNMP/Info/Layer3.pm +++ b/lib/SNMP/Info/Layer3.pm @@ -53,7 +53,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Layer3/Aironet.pm b/lib/SNMP/Info/Layer3/Aironet.pm index f5b831d8..26d1e7a9 100644 --- a/lib/SNMP/Info/Layer3/Aironet.pm +++ b/lib/SNMP/Info/Layer3/Aironet.pm @@ -41,7 +41,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/AlcatelLucent.pm b/lib/SNMP/Info/Layer3/AlcatelLucent.pm index 50b63b9e..10d45000 100644 --- a/lib/SNMP/Info/Layer3/AlcatelLucent.pm +++ b/lib/SNMP/Info/Layer3/AlcatelLucent.pm @@ -49,7 +49,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/AlteonAD.pm b/lib/SNMP/Info/Layer3/AlteonAD.pm index 0d9fee9f..6c288846 100644 --- a/lib/SNMP/Info/Layer3/AlteonAD.pm +++ b/lib/SNMP/Info/Layer3/AlteonAD.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Altiga.pm b/lib/SNMP/Info/Layer3/Altiga.pm index e22b8d99..52312d15 100644 --- a/lib/SNMP/Info/Layer3/Altiga.pm +++ b/lib/SNMP/Info/Layer3/Altiga.pm @@ -40,7 +40,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE $int_include_vpn $fake_idx $type_class/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Arista.pm b/lib/SNMP/Info/Layer3/Arista.pm index c547c15e..0022d2e2 100644 --- a/lib/SNMP/Info/Layer3/Arista.pm +++ b/lib/SNMP/Info/Layer3/Arista.pm @@ -48,7 +48,7 @@ use SNMP::Info::Aggregate 'agg_ports_ifstack'; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Aruba.pm b/lib/SNMP/Info/Layer3/Aruba.pm index 1ca6df59..797631d9 100644 --- a/lib/SNMP/Info/Layer3/Aruba.pm +++ b/lib/SNMP/Info/Layer3/Aruba.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/BayRS.pm b/lib/SNMP/Info/Layer3/BayRS.pm index 66bdb088..b6553dd1 100644 --- a/lib/SNMP/Info/Layer3/BayRS.pm +++ b/lib/SNMP/Info/Layer3/BayRS.pm @@ -43,7 +43,7 @@ use SNMP::Info::Bridge; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE %MODEL_MAP %MODID_MAP %PROCID_MAP/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Layer3/BlueCoatSG.pm b/lib/SNMP/Info/Layer3/BlueCoatSG.pm index 2e5d180d..882a6b3e 100644 --- a/lib/SNMP/Info/Layer3/BlueCoatSG.pm +++ b/lib/SNMP/Info/Layer3/BlueCoatSG.pm @@ -36,7 +36,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/C3550.pm b/lib/SNMP/Info/Layer3/C3550.pm index 9c5b7149..b72a8f5e 100644 --- a/lib/SNMP/Info/Layer3/C3550.pm +++ b/lib/SNMP/Info/Layer3/C3550.pm @@ -47,7 +47,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//; -$VERSION = '3.42'; +$VERSION = '3.43'; # NOTE: Order creates precedence # Example: v_name exists in Bridge.pm and CiscoVTP.pm diff --git a/lib/SNMP/Info/Layer3/C4000.pm b/lib/SNMP/Info/Layer3/C4000.pm index 2a98c125..848ffab0 100644 --- a/lib/SNMP/Info/Layer3/C4000.pm +++ b/lib/SNMP/Info/Layer3/C4000.pm @@ -44,7 +44,7 @@ use SNMP::Info::MAU; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MAU::MIBS, diff --git a/lib/SNMP/Info/Layer3/C6500.pm b/lib/SNMP/Info/Layer3/C6500.pm index 92d90f3b..08e27057 100644 --- a/lib/SNMP/Info/Layer3/C6500.pm +++ b/lib/SNMP/Info/Layer3/C6500.pm @@ -51,7 +51,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # NOTE: Order creates precedence # Example: v_name exists in Bridge.pm and CiscoVTP.pm diff --git a/lib/SNMP/Info/Layer3/CheckPoint.pm b/lib/SNMP/Info/Layer3/CheckPoint.pm index 5f963a21..80e6b98e 100644 --- a/lib/SNMP/Info/Layer3/CheckPoint.pm +++ b/lib/SNMP/Info/Layer3/CheckPoint.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Cisco.pm b/lib/SNMP/Info/Layer3/Cisco.pm index dedd1ce7..141f69da 100644 --- a/lib/SNMP/Info/Layer3/Cisco.pm +++ b/lib/SNMP/Info/Layer3/Cisco.pm @@ -55,7 +55,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/CiscoASA.pm b/lib/SNMP/Info/Layer3/CiscoASA.pm index 0670b4bf..10836bcb 100644 --- a/lib/SNMP/Info/Layer3/CiscoASA.pm +++ b/lib/SNMP/Info/Layer3/CiscoASA.pm @@ -45,7 +45,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStats::MIBS, ); diff --git a/lib/SNMP/Info/Layer3/CiscoFWSM.pm b/lib/SNMP/Info/Layer3/CiscoFWSM.pm index ef648bf7..87c07f1a 100644 --- a/lib/SNMP/Info/Layer3/CiscoFWSM.pm +++ b/lib/SNMP/Info/Layer3/CiscoFWSM.pm @@ -43,7 +43,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStats::MIBS, ); diff --git a/lib/SNMP/Info/Layer3/CiscoSwitch.pm b/lib/SNMP/Info/Layer3/CiscoSwitch.pm index 0b8af75e..e4e78654 100644 --- a/lib/SNMP/Info/Layer3/CiscoSwitch.pm +++ b/lib/SNMP/Info/Layer3/CiscoSwitch.pm @@ -50,7 +50,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::Cisco::MIBS, diff --git a/lib/SNMP/Info/Layer3/Contivity.pm b/lib/SNMP/Info/Layer3/Contivity.pm index 18a35c7d..f032889c 100644 --- a/lib/SNMP/Info/Layer3/Contivity.pm +++ b/lib/SNMP/Info/Layer3/Contivity.pm @@ -42,7 +42,7 @@ use SNMP::Info::Entity; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, %SNMP::Info::Layer3::MIBS, %SNMP::Info::Entity::MIBS, diff --git a/lib/SNMP/Info/Layer3/DLink.pm b/lib/SNMP/Info/Layer3/DLink.pm index 77b6d61c..3ea43f12 100644 --- a/lib/SNMP/Info/Layer3/DLink.pm +++ b/lib/SNMP/Info/Layer3/DLink.pm @@ -10,7 +10,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Dell.pm b/lib/SNMP/Info/Layer3/Dell.pm index b6f13445..f57b5099 100644 --- a/lib/SNMP/Info/Layer3/Dell.pm +++ b/lib/SNMP/Info/Layer3/Dell.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Enterasys.pm b/lib/SNMP/Info/Layer3/Enterasys.pm index 90781cf0..8ac96c3c 100644 --- a/lib/SNMP/Info/Layer3/Enterasys.pm +++ b/lib/SNMP/Info/Layer3/Enterasys.pm @@ -44,7 +44,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CDP::MIBS, diff --git a/lib/SNMP/Info/Layer3/Extreme.pm b/lib/SNMP/Info/Layer3/Extreme.pm index 4aff6328..47cfaa1b 100644 --- a/lib/SNMP/Info/Layer3/Extreme.pm +++ b/lib/SNMP/Info/Layer3/Extreme.pm @@ -46,7 +46,7 @@ use SNMP::Info::EDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/F5.pm b/lib/SNMP/Info/Layer3/F5.pm index 489436e7..c0789928 100644 --- a/lib/SNMP/Info/Layer3/F5.pm +++ b/lib/SNMP/Info/Layer3/F5.pm @@ -38,7 +38,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Force10.pm b/lib/SNMP/Info/Layer3/Force10.pm index db9c48b3..8b67c871 100644 --- a/lib/SNMP/Info/Layer3/Force10.pm +++ b/lib/SNMP/Info/Layer3/Force10.pm @@ -43,7 +43,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Fortinet.pm b/lib/SNMP/Info/Layer3/Fortinet.pm index f6733df9..e029b768 100644 --- a/lib/SNMP/Info/Layer3/Fortinet.pm +++ b/lib/SNMP/Info/Layer3/Fortinet.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Foundry.pm b/lib/SNMP/Info/Layer3/Foundry.pm index df2012ce..5ed59fe9 100644 --- a/lib/SNMP/Info/Layer3/Foundry.pm +++ b/lib/SNMP/Info/Layer3/Foundry.pm @@ -48,7 +48,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/H3C.pm b/lib/SNMP/Info/Layer3/H3C.pm index f27b01cd..3581de2a 100644 --- a/lib/SNMP/Info/Layer3/H3C.pm +++ b/lib/SNMP/Info/Layer3/H3C.pm @@ -47,7 +47,7 @@ use SNMP::Info::IEEE802dot3ad 'agg_ports_lag'; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/HP9300.pm b/lib/SNMP/Info/Layer3/HP9300.pm index 6c2ec675..69eef08b 100644 --- a/lib/SNMP/Info/Layer3/HP9300.pm +++ b/lib/SNMP/Info/Layer3/HP9300.pm @@ -42,7 +42,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Huawei.pm b/lib/SNMP/Info/Layer3/Huawei.pm index 68afc4d9..7167cbf1 100644 --- a/lib/SNMP/Info/Layer3/Huawei.pm +++ b/lib/SNMP/Info/Layer3/Huawei.pm @@ -47,7 +47,7 @@ use SNMP::Info::IEEE802dot3ad 'agg_ports_lag'; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/IBMGbTor.pm b/lib/SNMP/Info/Layer3/IBMGbTor.pm index 35e08d4e..ef7d98ff 100644 --- a/lib/SNMP/Info/Layer3/IBMGbTor.pm +++ b/lib/SNMP/Info/Layer3/IBMGbTor.pm @@ -41,7 +41,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Juniper.pm b/lib/SNMP/Info/Layer3/Juniper.pm index 97b4d17d..4ce4d6a1 100644 --- a/lib/SNMP/Info/Layer3/Juniper.pm +++ b/lib/SNMP/Info/Layer3/Juniper.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Lantronix.pm b/lib/SNMP/Info/Layer3/Lantronix.pm index 5333038f..f8b19b00 100644 --- a/lib/SNMP/Info/Layer3/Lantronix.pm +++ b/lib/SNMP/Info/Layer3/Lantronix.pm @@ -41,7 +41,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Microsoft.pm b/lib/SNMP/Info/Layer3/Microsoft.pm index 1c7127ce..8ac909de 100644 --- a/lib/SNMP/Info/Layer3/Microsoft.pm +++ b/lib/SNMP/Info/Layer3/Microsoft.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, ); diff --git a/lib/SNMP/Info/Layer3/Mikrotik.pm b/lib/SNMP/Info/Layer3/Mikrotik.pm index 8bd46ecc..696e3857 100644 --- a/lib/SNMP/Info/Layer3/Mikrotik.pm +++ b/lib/SNMP/Info/Layer3/Mikrotik.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/N1600.pm b/lib/SNMP/Info/Layer3/N1600.pm index 135d42a3..f32870ea 100644 --- a/lib/SNMP/Info/Layer3/N1600.pm +++ b/lib/SNMP/Info/Layer3/N1600.pm @@ -41,7 +41,7 @@ use SNMP::Info::SONMP; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/NetSNMP.pm b/lib/SNMP/Info/Layer3/NetSNMP.pm index a86935ef..6a34f85e 100644 --- a/lib/SNMP/Info/Layer3/NetSNMP.pm +++ b/lib/SNMP/Info/Layer3/NetSNMP.pm @@ -40,7 +40,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Netscreen.pm b/lib/SNMP/Info/Layer3/Netscreen.pm index 7954a28c..8b1c8aae 100644 --- a/lib/SNMP/Info/Layer3/Netscreen.pm +++ b/lib/SNMP/Info/Layer3/Netscreen.pm @@ -40,7 +40,7 @@ use SNMP::Info::IEEE802dot11; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Nexus.pm b/lib/SNMP/Info/Layer3/Nexus.pm index c6e95cec..5df87e92 100644 --- a/lib/SNMP/Info/Layer3/Nexus.pm +++ b/lib/SNMP/Info/Layer3/Nexus.pm @@ -46,7 +46,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; # NOTE: Order creates precedence # Example: v_name exists in Bridge.pm and CiscoVTP.pm diff --git a/lib/SNMP/Info/Layer3/PacketFront.pm b/lib/SNMP/Info/Layer3/PacketFront.pm index 99ed1a45..d9270f06 100644 --- a/lib/SNMP/Info/Layer3/PacketFront.pm +++ b/lib/SNMP/Info/Layer3/PacketFront.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/PaloAlto.pm b/lib/SNMP/Info/Layer3/PaloAlto.pm index 842dd9be..936e2821 100644 --- a/lib/SNMP/Info/Layer3/PaloAlto.pm +++ b/lib/SNMP/Info/Layer3/PaloAlto.pm @@ -38,7 +38,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Passport.pm b/lib/SNMP/Info/Layer3/Passport.pm index 80b923eb..6cc7296c 100644 --- a/lib/SNMP/Info/Layer3/Passport.pm +++ b/lib/SNMP/Info/Layer3/Passport.pm @@ -43,7 +43,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::RapidCity::MIBS, diff --git a/lib/SNMP/Info/Layer3/Pf.pm b/lib/SNMP/Info/Layer3/Pf.pm index 8cc7fcfc..ea326a75 100644 --- a/lib/SNMP/Info/Layer3/Pf.pm +++ b/lib/SNMP/Info/Layer3/Pf.pm @@ -41,7 +41,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Pica8.pm b/lib/SNMP/Info/Layer3/Pica8.pm index a7e852a5..ed43b29f 100644 --- a/lib/SNMP/Info/Layer3/Pica8.pm +++ b/lib/SNMP/Info/Layer3/Pica8.pm @@ -39,7 +39,7 @@ use SNMP::Info::LLDP; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/SonicWALL.pm b/lib/SNMP/Info/Layer3/SonicWALL.pm index 44e6d595..f0862ac5 100644 --- a/lib/SNMP/Info/Layer3/SonicWALL.pm +++ b/lib/SNMP/Info/Layer3/SonicWALL.pm @@ -36,7 +36,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Steelhead.pm b/lib/SNMP/Info/Layer3/Steelhead.pm index bead989c..41dd70c9 100644 --- a/lib/SNMP/Info/Layer3/Steelhead.pm +++ b/lib/SNMP/Info/Layer3/Steelhead.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Sun.pm b/lib/SNMP/Info/Layer3/Sun.pm index cd551357..8a6f39a1 100644 --- a/lib/SNMP/Info/Layer3/Sun.pm +++ b/lib/SNMP/Info/Layer3/Sun.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, ); diff --git a/lib/SNMP/Info/Layer3/Tasman.pm b/lib/SNMP/Info/Layer3/Tasman.pm index 8418b1f6..c487d4a3 100644 --- a/lib/SNMP/Info/Layer3/Tasman.pm +++ b/lib/SNMP/Info/Layer3/Tasman.pm @@ -42,7 +42,7 @@ use SNMP::Info::MAU; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer3/Timetra.pm b/lib/SNMP/Info/Layer3/Timetra.pm index 8b391007..6b2dfe28 100644 --- a/lib/SNMP/Info/Layer3/Timetra.pm +++ b/lib/SNMP/Info/Layer3/Timetra.pm @@ -40,7 +40,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer3::MIBS, 'TIMETRA-GLOBAL-MIB' => 'timetraReg', ); diff --git a/lib/SNMP/Info/Layer3/VMware.pm b/lib/SNMP/Info/Layer3/VMware.pm index 9f50d6e5..ba20f577 100644 --- a/lib/SNMP/Info/Layer3/VMware.pm +++ b/lib/SNMP/Info/Layer3/VMware.pm @@ -39,7 +39,7 @@ use SNMP::Info::IEEE802dot3ad 'agg_ports_lag'; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::IEEE802dot3ad::MIBS, diff --git a/lib/SNMP/Info/Layer3/VyOS.pm b/lib/SNMP/Info/Layer3/VyOS.pm index 1f483660..a54be7c9 100644 --- a/lib/SNMP/Info/Layer3/VyOS.pm +++ b/lib/SNMP/Info/Layer3/VyOS.pm @@ -39,7 +39,7 @@ use SNMP::Info::Layer3; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS, diff --git a/lib/SNMP/Info/Layer7.pm b/lib/SNMP/Info/Layer7.pm index 1b2eb485..77fd46a5 100644 --- a/lib/SNMP/Info/Layer7.pm +++ b/lib/SNMP/Info/Layer7.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::MIBS, diff --git a/lib/SNMP/Info/Layer7/APC.pm b/lib/SNMP/Info/Layer7/APC.pm index 9317c997..7711a5d6 100644 --- a/lib/SNMP/Info/Layer7/APC.pm +++ b/lib/SNMP/Info/Layer7/APC.pm @@ -40,7 +40,7 @@ use SNMP::Info::Layer7; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer7::MIBS, diff --git a/lib/SNMP/Info/Layer7/CiscoIPS.pm b/lib/SNMP/Info/Layer7/CiscoIPS.pm index cb8d7410..eceb4a78 100644 --- a/lib/SNMP/Info/Layer7/CiscoIPS.pm +++ b/lib/SNMP/Info/Layer7/CiscoIPS.pm @@ -46,7 +46,7 @@ use SNMP::Info::Entity; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer7::MIBS, %SNMP::Info::Entity::MIBS, ); diff --git a/lib/SNMP/Info/Layer7/Neoteris.pm b/lib/SNMP/Info/Layer7/Neoteris.pm index ed094b14..ffde8acf 100644 --- a/lib/SNMP/Info/Layer7/Neoteris.pm +++ b/lib/SNMP/Info/Layer7/Neoteris.pm @@ -38,7 +38,7 @@ use SNMP::Info::Layer7; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer7::MIBS, diff --git a/lib/SNMP/Info/Layer7/Netscaler.pm b/lib/SNMP/Info/Layer7/Netscaler.pm index c9825d01..674a3ea3 100644 --- a/lib/SNMP/Info/Layer7/Netscaler.pm +++ b/lib/SNMP/Info/Layer7/Netscaler.pm @@ -38,7 +38,7 @@ use SNMP::Info::Layer7; use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( %SNMP::Info::Layer7::MIBS, diff --git a/lib/SNMP/Info/MAU.pm b/lib/SNMP/Info/MAU.pm index bea40485..9389eaa9 100644 --- a/lib/SNMP/Info/MAU.pm +++ b/lib/SNMP/Info/MAU.pm @@ -41,7 +41,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'MAU-MIB' => 'mauMod', 'IANA-MAU-MIB' => 'dot3MauType' ); diff --git a/lib/SNMP/Info/MRO.pm b/lib/SNMP/Info/MRO.pm index 109cac31..e7ce2bfd 100644 --- a/lib/SNMP/Info/MRO.pm +++ b/lib/SNMP/Info/MRO.pm @@ -4,7 +4,7 @@ use warnings; use strict; use vars qw/$VERSION/; -$VERSION = '3.42'; +$VERSION = '3.43'; use PPI; use Class::ISA; diff --git a/lib/SNMP/Info/NortelStack.pm b/lib/SNMP/Info/NortelStack.pm index 5b352a08..0b6a3170 100644 --- a/lib/SNMP/Info/NortelStack.pm +++ b/lib/SNMP/Info/NortelStack.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( diff --git a/lib/SNMP/Info/PowerEthernet.pm b/lib/SNMP/Info/PowerEthernet.pm index 031adf14..b2f75187 100644 --- a/lib/SNMP/Info/PowerEthernet.pm +++ b/lib/SNMP/Info/PowerEthernet.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'POWER-ETHERNET-MIB' => 'pethPsePortDetectionStatus' ); diff --git a/lib/SNMP/Info/RapidCity.pm b/lib/SNMP/Info/RapidCity.pm index 23fbc659..bfffbb59 100644 --- a/lib/SNMP/Info/RapidCity.pm +++ b/lib/SNMP/Info/RapidCity.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'RAPID-CITY' => 'rapidCity', diff --git a/lib/SNMP/Info/SONMP.pm b/lib/SNMP/Info/SONMP.pm index 838d7f37..4e1943d8 100644 --- a/lib/SNMP/Info/SONMP.pm +++ b/lib/SNMP/Info/SONMP.pm @@ -39,7 +39,7 @@ use SNMP::Info; use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/; -$VERSION = '3.42'; +$VERSION = '3.43'; %MIBS = ( 'SYNOPTICS-ROOT-MIB' => 'synoptics',