*** empty log message ***

ChangeLog

@@ -1,6 +1,22 @@
 SNMP::Info - Perl5 OO Interface to Network Devices and SNMP MIBs
 ChangeLog $Id$
 
+version 0.7 ()
+    * Added Class for Catalyst 6500 Series - Layer3::C6500
+    * Added CiscoVTP support to 3550,2900, and Catalyst classes
+    * Extracted VLAN stuff from Layer2::Catalyst to SNMP::Info::CiscoVTP
+    * Extracted CISCO-STACK-MIB from Layer2::Catalyst to SNMP::Info::CiscoStack
+    * Added 2950's to the Layer2::C2900 class
+    * Added 3548's and 350x's to the Layer3::C3550 class
+    * Broke out 3550's into separate device types (3550-24, 3550-48)
+    * Added T1,dual T1, and T3 , ATM over OC-12 ... to the SPEED_MAP
+    * Fixed speed map -- OC-1 -> OC-3
+    * Fixed Bug where Catalyst Switch running IOS would report CatOS as os()
+
+version 0.6 (06/18/03)
+    * Minor Bug Fix.  SNMP::Info::Layer2::Bay and SNMP::Info::Layer2::C1900
+      didn't return 1 and failed to load on some versions of Perl.
+
 version 0.5 (06/10/03)
     * Added ability to get paritial tables.  For example to get the
       IP routing table for 128.114.*  you can do 

DeviceMatrix.txt

@@ -0,0 +1,320 @@
+# SNMP Device Compatibility Matrix
+# SNMP::Info - Max Baker
+
+# This file is meant to detail the cababilities
+# of network devices to supply data via SNMP.  
+
+# $Id$
+
+# Allied
+device-vendor: Allied Telesyn
+
+device-family: Hubs
+class: Layer1::Allied
+ver: 1
+arpnip: no
+macsuck: no
+duplex: no
+
+device: AT-3624T
+
+# Asante
+device-vendor: Asante
+
+device-family: Hubs
+class: Layer1::Asante
+ver: 1
+arpnip: no
+macsuck: no
+duplex: no
+
+device: 1012
+
+# Bay
+device-vendor: Bay Networks
+class: Layer2::Bay
+ver: 1
+
+device-family: BayStack
+macsuck: yes
+cdp: proprietary
+note: SNMP interface does not respond after 2+ months of uptime. Reboot to fix.
+
+device: 303
+device: 304
+device: 450
+note: Labels full duplex as 20Mbit connection.
+
+# CISCO
+device-vendor: Cisco
+cdp: yes
+ver: 2
+note: Error in CISCO-TC-MIB. See README for how to patch.
+
+device-family: Aironet
+note: IOS and Aironet OS versions
+class: Layer3::Aironet
+
+device: AIRAP1100
+note: IOS based device
+class: Layer2::Aironet
+
+device: AP1200
+note: Aironet based device
+
+device: AP350, AP340
+note: Aironet based device
+
+device-family: 1000
+duplex: no
+ver: 1
+class: Layer3
+
+device: 1003
+
+device-family: 1700
+class: Layer3
+
+device: 1710
+duplex: link
+
+device-family: 2500
+duplex: no
+macsuck: yes
+arpnip: yes
+ver: 1
+class: Layer3
+
+device: 2501
+
+device: 2503
+
+device: AS2509RJ
+
+device: AS2511RJ
+
+device: 2511
+
+device: 2514
+
+device-family: 2600
+duplex: link
+arpnip: yes
+macsuck: yes
+class: Layer3
+
+device:2610
+
+device:2611
+
+device:2620
+
+device:2620XM
+
+device:2621
+
+device:2621XM
+
+device:2651XM
+
+device-family: 3600
+class: Layer3
+
+device: 3620
+
+device: 3640
+duplex: no
+
+device-family: 7500
+class: Layer3
+
+device: 7507
+duplex: no
+note: !Duplex settings are falsely reported in older IOS versions
+
+device-family: AS5000
+duplex: no
+class: Layer3
+
+device: AS5300
+
+#
+# Cisco - Catalyst
+#
+device-family: Catalyst 1900
+note: !Upgrade older (pre 9.0) versions of CatOS
+ver: 1
+class: Layer2::C1900
+
+device: wsc1900c
+device-family: Catalyst 1900
+
+device: wsc1900
+device-family: Catalyst 1900
+
+device-family: Catalyst 2900
+note: IOS
+macsuck: vlan
+class: Layer3::C2900
+portmac: yes
+note: !Pre IOS 11.2 (8) SA3 - PortMAC shows up in CAM table.
+
+device: 2908xl
+note: !Pre IOS 11.2 (8.6) some features (duplex...) aren't present.
+
+device: 2912MfXL
+
+device: 2924MXL
+ver: 1
+portmac: yes
+
+device: 2924CXL
+
+device: 2924CXLv
+
+device-family: Catalyst 3500 XL
+portmac: yes
+note: L2 only IOS devices
+class: Layer2
+
+device: 3508GXL
+
+device: 3524XL
+
+device: 3548XL
+macsuck: no
+
+device-family: Catalyst 3550
+macsuck: vlan
+duplex: both
+class: Layer3::C3550
+note: Run IOS
+note: Has VLANs that don't accept SNMP connections.  Don't know if they are standard (by name or number).
+note: Uses CISCO-STACK-MIB like Catalyst 5000 series for serial,duplex,type but not name
+note: Comes in flavors that support L2, L3 or combo.
+
+device: 3550-12T
+
+device: 3550
+note: L2/L3 Switch
+arpnip: yes
+
+device: 3550-24, 3550-48
+note: L2 only switch
+macsuck: no
+note: !BRIDGE-MIB not implemented.
+
+device-family: Catalyst 4000
+duplex: both
+macsuck: vlan
+class: Layer2::Catalyst
+note: Comes in IOS and CatOS versions like the 6k series.
+note: CatOS versions like L2::Catalyst just fine.
+note: !Reported problems with SNMP taking up all the CPU.  Requests take significantly longer.
+
+device: wsc4006
+
+device: 4507
+note: !IOS device -- Test against C3550 and C6000 classes
+class: Layer3
+
+device: wsc4912g
+note: Dedicated 12 port gig-e switch
+
+device-family: Catalyst 5000
+duplex: both
+class: Layer2::Catalyst
+note: Port info in CISCO-STACK-MIB
+
+device: wsc2926
+note: !Can give false information over SNMP at times.
+
+device: wsc2948g
+
+device: wsc2980g
+note: !Macsuck not working?
+
+device: wsc5000
+note: !Has nasty tendency to not give you all SNMP data ,flaky for some older Catalyst versions.
+
+device: wsc5505
+
+device: wsc5509
+
+device: wsc5500
+
+device: wsx5302
+arpnip: yes
+class: Layer3
+note: Router blade that runs IOS
+
+device-family: Catalyst 6500
+macsuck:vlan
+class: Layer3::C6500
+note: Runs in two possible modes, native (IOS) and hybrid (IOS with CatOS on top).
+note: Switch running Hybrid has WS-C in description field and loves L2::Catalyst class
+note: Native Mode (IOS) versions seem to have SNMP problems with L2 data.
+
+device: 6503
+macsuck:no
+note: !Macsuck failing even under vlan mode
+note: Native mode (IOS) reports L2+L3
+
+device: 6509
+duplex: link
+macsuck:no
+note: Native mode (IOS) reports L2+L3
+note: !Macsuck failing even under vlan mode
+
+device: wsc6509
+duplex: both
+class: Layer2::Catalyst
+note: Hybrid Mode (Catalyst) reports L2 only
+
+device: 6kMsfc
+class: Layer3
+note: IOS portion of Hybrid mode.  VLAN and other L3 Services.
+
+device: 6kMsfc2
+class: Layer3
+note: IOS portion of Hybrid mode.  VLAN and other L3 Services.
+
+device-family: Voice Gateway
+class: Layer3
+duplex: no
+
+device: VG200
+
+# Foundry
+device-vendor: Foundry Networks
+class: Layer3::Foundry
+
+device-family: FastIron
+ver: 1
+
+# HP
+device-vendor: HP
+class:  Layer2::HP
+ver: 2
+
+device-family: ProCurve
+duplex: both
+macsuck: yes
+arpnip: no
+cdp: yes
+note: CDP only available with newer ROM versions. 
+
+device: 2512
+ver: 1
+
+device: 2524
+ver: 1
+
+device: 4000
+
+device: 4104GL
+duplex: link
+
+device: 4108GL
+
+device: 8000

Info.pm

@@ -7,7 +7,7 @@
 # See COPYRIGHT at bottom
 
 package SNMP::Info;
-$VERSION = 0.5;
+$VERSION = 0.7;
 use strict;
 
 use Exporter;
@@ -27,7 +27,7 @@ SNMP::Info - Object Oriented Perl5 Interface to Network devices and MIBs through
 
 =head1 VERSION
 
-SNMP::Info - Version 0.5
+SNMP::Info - Version 0.6
 
 =head1 AUTHOR
 
@@ -371,6 +371,11 @@ Subclass for Cisco Catalyst 3550 2/3 switches running IOS.
 
 =back
 
+=head2 Thanks
+
+Thanks for testing and coding help (in no particular order) to :
+Andy Ford, Brian Wilson, Jean-Philippe Luiggi, D<>na Watanabe 
+
 =head1 USAGE
 
 =head2 Constructor
@@ -491,8 +496,8 @@ sub new {
     $new_obj->{store}     = $store;
     $new_obj->{sess}      = $sess;
     $new_obj->{args}      = \%args;
-    $new_obj->{snmp_ver}  = $args{Version};
+    $new_obj->{snmp_ver}  = $args{Version}   || 2;
-    $new_obj->{snmp_comm} = $args{Community};
+    $new_obj->{snmp_comm} = $args{Community} || 'public';
 
     return $auto_specific ?
         $new_obj->specify() : $new_obj;
@@ -574,13 +579,15 @@ Algorithm for Subclass Detection:
         Layer3 Support                     -> SNMP::Info::Layer3
             Aironet (non IOS)              -> SNMP::Info::Layer3::Aironet
             Catalyst 3550                  -> SNMP::Info::Layer3::C3550
+            Catalyst 6500                  -> SNMP::Info::Layer3::C6500
             Foundry                        -> SNMP::Info::Layer3::Foundry
         Elsif Layer2 (no Layer3)           -> SNMP::Info::Layer2 
             Aironet (Cisco) AP1100         -> SNMP::Info::Layer2::Aironet
             Bay Networks                   -> SNMP::Info::Layer2::Bay
             Catalyst 1900                  -> SNMP::Info::Layer2::C1900
-            Catalyst 2900XL (IOS)          -> SNMP::Info::Layer2::C2900
+            Catalyst 2900XL/2950(IOS)      -> SNMP::Info::Layer2::C2900
-            Catalyst WS-C (2926,5xxx,6xxx) -> SNMP::Info::Layer2::Catalyst
+            Catalyst 3550/3548             -> SNMP::Info::Layer3::C3550
+            Catalyst WS-C 2926,5xxx        -> SNMP::Info::Layer2::Catalyst
             HP Procurve                    -> SNMP::Info::Layer2::HP
         Elsif Layer1 Support               -> SNMP::Info::Layer1
             Allied                         -> SNMP::Info::Layer1::Allied
@@ -610,7 +617,9 @@ sub device_type {
 
         $objtype = 'SNMP::Info::Layer3::C3550'   if $desc =~ /C3550/ ;
         $objtype = 'SNMP::Info::Layer3::Foundry' if $desc =~ /foundry/i ;
-        $objtype = 'SNMP::Info::Layer3::Aironet' if ($desc =~ /cisco/i and $desc =~ /\D3[45]0\D/) ;
+        # Aironet - older non-IOS
+        $objtype = 'SNMP::Info::Layer3::Aironet' if ($desc =~ /Cisco/ and $desc =~ /\D(CAP340|AP340|CAP350|350|1200)\D/) ;
+        $objtype = 'SNMP::Info::Layer3::C6500'   if $desc =~ /c6sup2/;
 
     # Layer 2 Supported
     } elsif ($info->has_layer(2)) {
@@ -624,18 +633,21 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer2::C1900' if ($desc =~ /catalyst/i and $desc =~ /\D19\d{2}/);
 
         #   Catalyst 2900 (IOS) series override
-        $objtype = 'SNMP::Info::Layer2::C2900' if ($desc =~ /C2900XL/i );
+        $objtype = 'SNMP::Info::Layer2::C2900' if ($desc =~ /(C2900XL|C2950)/ );
 
-        #   Catalyst WS-C series override (2926,5xxx,6xxx)
+        #   Catalyst WS-C series override 2926,4k,5k,6k in Hybrid
         $objtype = 'SNMP::Info::Layer2::Catalyst' if ($desc =~ /WS-C\d{4}/);
 
+        #   Catalyst 3550 / 3548 Layer2 only switches
+        $objtype = 'SNMP::Info::Layer3::C3550' if ($desc =~ /C3550/);
+
         #   HP
-        $objtype = 'SNMP::Info::Layer2::HP' if ($desc =~ /hp/i); 
+        $objtype = 'SNMP::Info::Layer2::HP' if ($desc =~ /HP.*ProCurve/); 
     
         #  Bay Switch
-        $objtype = 'SNMP::Info::Layer2::Bay' if ($desc =~ /bay/i);
+        $objtype = 'SNMP::Info::Layer2::Bay' if ($desc =~ /BayStack/);
 
-        #  Aironet
+        #  Aironet - IOS
         $objtype = 'SNMP::Info::Layer2::Aironet' if ($desc =~ /C1100/);
     
     } elsif ($info->has_layer(1)) {
@@ -1420,6 +1432,7 @@ Let's make a sample Layer 2 Device subclass :
  =head2 Overrides
  =cut
 
+ 1; # don't forget this line
 ----------------------- snip --------------------------------
 
 Be sure and send the debugged version to snmp@warped.org to be 
@@ -1478,55 +1491,76 @@ $NOSUCH = 1;
 Makes human friendly speed ratings using %SPEED_MAP
 
  %SPEED_MAP = (
+                '56000'      => '56 kbps',
                 '64000'      => '64 kbps',
                 '1500000'    => '1.5 Mbps',
+                '1536000'    => 'T1',      
                 '1544000'    => 'T1',
                 '2000000'    => '2.0 Mbps',
                 '2048000'    => '2.048 Mbps',
+                '3072000'    => 'Dual T1',
+                '3088000'    => 'Dual T1',   
                 '4000000'    => '4.0 Mbps',
                 '10000000'   => '10 Mbps',
                 '11000000'   => '11 Mbps',
                 '20000000'   => '20 Mbps',
                 '16000000'   => '16 Mbps',
-                '45000000'   => 'DS3',
+                '44736000'   => 'T3',
-                '45045000'   => 'DS3',
-                '64000000'   => '64 Mbps',
-                '100000000'  => '100 Mbps',
-                '149760000'  => 'OC-1'
-                '155000000'  => 'OC-1'
-                '400000000'  => '400 Mbps',
-                '622000000'  => 'OC-12',
-                '599040000'  => 'OC-12', 
-                '1000000000' => '1.0 Gbps',
-             );
-
-=cut
-%SPEED_MAP = (
-                '64000'      => '64 kbps',
-                '1500000'    => '1.5 Mbps',
-                '1544000'    => 'T1',
-                '2000000'    => '2.0 Mbps',
-                '2048000'    => '2.048 Mbps',
-                '4000000'    => '4.0 Mbps',
-                '10000000'   => '10 Mbps',
-                '11000000'   => '11 Mbps',
-                '20000000'   => '20 Mbps',
-                '16000000'   => '16 Mbps',
                 '45000000'   => '45 Mbps',
                 '45045000'   => 'DS3',
                 '64000000'   => '64 Mbps',
                 '100000000'  => '100 Mbps',
-                '149760000'  => 'OC-1',
+                '149760000'  => 'ATM on OC-3',
-                '155000000'  => 'OC-1',
+                '155000000'  => 'OC-3',
+                '155519000'  => 'OC-3',
+                '155520000'  => 'OC-3',
                 '400000000'  => '400 Mbps',
+                '599040000'  => 'ATM on OC-12', 
                 '622000000'  => 'OC-12',
-                '599040000'  => 'OC-12', 
+                '622080000'  => 'OC-12',
+                '1000000000' => '1.0 Gbps',
+             )
+
+=cut
+%SPEED_MAP = (
+                '56000'      => '56 kbps',
+                '64000'      => '64 kbps',
+                '115000'     => '115 kpbs',
+                '1500000'    => '1.5 Mbps',
+                '1536000'    => 'T1',      
+                '1544000'    => 'T1',
+                '2000000'    => '2.0 Mbps',
+                '2048000'    => '2.048 Mbps',
+                '3072000'    => 'Dual T1',
+                '3088000'    => 'Dual T1',   
+                '4000000'    => '4.0 Mbps',
+                '10000000'   => '10 Mbps',
+                '11000000'   => '11 Mbps',
+                '20000000'   => '20 Mbps',
+                '16000000'   => '16 Mbps',
+                '44736000'   => 'T3',
+                '45000000'   => '45 Mbps',
+                '45045000'   => 'DS3',
+                '51850000'   => 'OC-1',
+                '64000000'   => '64 Mbps',
+                '100000000'  => '100 Mbps',
+                '149760000'  => 'ATM on OC-3',
+                '155000000'  => 'OC-3',
+                '155519000'  => 'OC-3',
+                '155520000'  => 'OC-3',
+                '400000000'  => '400 Mbps',
+                '599040000'  => 'ATM on OC-12', 
+                '622000000'  => 'OC-12',
+                '622080000'  => 'OC-12',
                 '1000000000' => '1.0 Gbps',
              );
 
 sub munge_speed {
     my $speed = shift;
-    return defined $SPEED_MAP{$speed} ? $SPEED_MAP{$speed} : $speed;
+    my $map   = $SPEED_MAP{$speed};
+
+    #print "  $speed -> $map  " if (defined $map); 
+    return $map || $speed;
 }
 
 =item munge_ip() 
@@ -1679,7 +1713,7 @@ sub error_throw {
     $self->{error} = $error;
 
     if ($self->debug()){
-        $error .= "\n" unless $error =~ /\n$/;
+        $error =~  s/\n+$//;
         carp($error);
     }
 }

Info/Bridge.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Bridge;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/CDP.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::CDP;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/CiscoStack.pm

@@ -0,0 +1,484 @@
+# SNMP::Info::CiscoStack
+# Max Baker <max@warped.org>
+#
+# Copyright (c) 2003 Max Baker
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without 
+# modification, are permitted provided that the following conditions are met:
+# 
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright notice,
+#       this list of conditions and the following disclaimer in the documentation
+#       and/or other materials provided with the distribution.
+#     * Neither the name of the author nor the 
+#       names of its contributors may be used to endorse or promote products 
+#       derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoStack;
+$VERSION = 0.7;
+# $Id$
+
+use strict;
+
+use Exporter;
+use SNMP::Info;
+
+use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/;
+@SNMP::Info::CiscoStack::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoStack::EXPORT_OK = qw//;
+
+$DEBUG=0;
+$SNMP::debugging=$DEBUG;
+
+$INIT    = 0;
+%MIBS    = (
+            'CISCO-STACK-MIB'     => 'ciscoStackMIB',
+           );
+
+%GLOBALS = (
+            'sysip'       => 'sysIpAddr',    
+            'netmask'     => 'sysNetMask',    
+            'broadcast'   => 'sysBroadcast',
+            'serial1'     => 'chassisSerialNumber',    
+            'serial2'     => 'chassisSerialNumberString',
+            'model1'      => 'chassisModel',    
+            'ps1_type'    => 'chassisPs1Type',    
+            'ps1_status'  => 'chassisPs1Status',    
+            'ps2_type'    => 'chassisPs2Type',    
+            'ps2_status'  => 'chassisPs2Status',    
+            'slots'       => 'chassisNumSlots',    
+            'fan'         => 'chassisFanStatus',
+           );
+
+%FUNCS   = (
+            'i_type2'        => 'ifType',
+            # CISCO-STACK-MIB::moduleEntry
+            #   These are blades in a catalyst device
+            'm_type'         => 'moduleType',
+            'm_model'        => 'moduleModel',
+            'm_serial'       => 'moduleSerialNumber',
+            'm_status'       => 'moduleStatus',
+            'm_name'         => 'moduleName',
+            'm_ports'        => 'moduleNumPorts',
+            'm_ports_status' => 'modulePortStatus',
+            'm_hwver'        => 'moduleHwVersion',
+            'm_fwver'        => 'moduleFwVersion',
+            'm_swver'        => 'moduleSwVersion',
+            # Router Blades :
+            'm_ip'           => 'moduleIPAddress',
+            'm_sub1'         => 'moduleSubType',
+            'm_sub2'         => 'moduleSubType2',
+            # CISCO-STACK-MIB::portEntry 
+            'p_name'    => 'portName',
+            'p_type'    => 'portType',
+            'p_status'  => 'portOperStatus',
+            'p_status2' => 'portAdditionalStatus',
+            'p_speed'   => 'portAdminSpeed',
+            'p_duplex'  => 'portDuplex',
+            'p_port'    => 'portIfIndex',
+            # CISCO-STACK-MIB::PortCpbEntry
+            'p_speed_admin'  => 'portCpbSpeed',
+            'p_duplex_admin' => 'portCpbDuplex',
+           );
+
+%MUNGE   = (
+            'm_ports_status' => \&munge_port_status,
+            'p_duplex_admin' => \&SNMP::Info::munge_bits,
+           );
+
+%PORTSTAT = (1 => 'other',
+             2 => 'ok',
+             3 => 'minorFault',
+             4 => 'majorFault');
+
+# Changes binary byte describing each port into ascii, and returns
+# an ascii list separated by spaces.
+sub munge_port_status {
+    my $status = shift;
+    my @vals = map($PORTSTAT{$_},unpack('C*',$status));
+    return join(' ',@vals);
+}
+
+sub serial {
+    my $stack = shift;
+    my $serial1 = $stack->serial1();
+    my $serial2 = $stack->serial2();
+
+    return $serial1 if defined $serial1;
+    return $serial2 if defined $serial2;
+    return undef;
+}
+
+sub i_type {
+    my $stack = shift;
+
+    my $p_port = $stack->p_port();
+    my $p_type  = $stack->p_type();
+
+    # Get more generic port types from IF-MIB
+    my $i_type  = $stack->i_type2();
+
+    # Now Override w/ port entries
+    foreach my $port (keys %$p_type) {
+        my $iid = $p_port->{$port};
+        $i_type->{$iid} = $p_type->{$port};  
+    }
+
+    return $i_type;
+}
+
+# p_* functions are indexed to physical port.  let's index these
+#   to snmp iid
+sub i_name {
+    my $stack = shift;
+
+    my $p_port = $stack->p_port();
+    my $p_name  = $stack->p_name();
+
+    my %i_name;
+    foreach my $port (keys %$p_name) {
+        my $iid = $p_port->{$port};
+        next unless defined $iid;
+        $i_name{$iid} = $p_name->{$port};
+    }
+    return \%i_name; 
+}
+
+sub i_duplex {
+    my $stack = shift;
+
+    #my $i_duplex = $stack->SUPER::i_duplex();
+    my $p_port = $stack->p_port();
+    my $p_duplex  = $stack->p_duplex();
+
+    my $i_duplex = {};
+    foreach my $port (keys %$p_duplex) {
+        my $iid = $p_port->{$port};
+        $i_duplex->{$iid} = $p_duplex->{$port};
+    }
+    return $i_duplex; 
+}
+
+sub i_duplex_admin {
+    my $stack = shift;
+
+    my $p_port          = $stack->p_port();
+    my $p_duplex_admin  = $stack->p_duplex_admin();
+
+    my %i_duplex_admin;
+    foreach my $port (keys %$p_duplex_admin) {
+        my $iid = $p_port->{$port};
+        next unless defined $iid;
+        my $duplex = $p_duplex_admin->{$port};
+        next unless defined $duplex;
+
+        my $string = 'other';
+        # see CISCO-STACK-MIB for a description of the bits
+        $string = 'half' if ($duplex =~ /001$/ or $duplex =~ /0100.$/);
+        $string = 'full' if ($duplex =~ /010$/ or $duplex =~ /100.0$/);
+        # we'll call it auto if both full and half are turned on, or if the
+        #   specifically 'auto' flag bit is set.
+        $string = 'auto' 
+            if ($duplex =~ /1..$/ or $duplex =~ /110..$/ or $duplex =~ /..011$/);
+       
+        $i_duplex_admin{$iid} = $string;
+    }
+    return \%i_duplex_admin; 
+}
+
+# $stack->interfaces() - Maps the ifIndex table to a physical port
+sub interfaces {
+    my $self = shift;
+    my $i_index    = $self->i_index();
+    my $portnames  = $self->p_port();
+    my %portmap    = reverse %$portnames;
+
+    my %interfaces = ();
+    foreach my $iid (keys %$i_index) {
+        my $if   = $i_index->{$iid};
+        my $port = $portmap{$iid};
+        $interfaces{$iid} = $port || $if;
+    }
+
+    return \%interfaces;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoStack - Perl5 Interface to CPU and Memory stats for Cisco Devices
+
+=head1 AUTHOR
+
+Max Baker (C<max@warped.org>)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ciscostats = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          # These arguments are passed directly on to SNMP::Session
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $ciscostats->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoStack is a subclass of SNMP::Info that provides
+an interface to the C<CISCO-STACK-MIB>.  This MIB is used across
+the Catalyst family under CatOS and IOS.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+none.
+
+=head2 Required MIBs
+
+=over
+
+=item CISCO-STACK-MIB
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBALS
+
+=over
+
+=item $stack->broadcast()
+
+(B<sysBroadcast>)
+
+=item $stack->fan()
+
+(B<chassisFanStatus>)
+
+=item $stack->model()
+
+(B<chassisModel>)
+
+=item $stack->netmask()
+
+(B<sysNetMask>)
+
+=item $stack->ps1_type()
+
+(B<chassisPs1Type>)
+
+=item $stack->ps2_type()
+
+(B<chassisPs2Type>)
+
+=item $stack->ps1_status()
+
+(B<chassisPs1Status>)
+
+=item $stack->ps2_status()
+
+(B<chassisPs2Status>)
+
+=item $stack->serial()
+
+(B<chassisSerialNumberString>) or (B<chassisSerialNumber>)
+
+=item $stack->slots()
+
+(B<chassisNumSlots>)
+
+=back
+
+=head1 TABLE METHODS
+
+=head2 Interface Tables
+
+=over
+
+=item $stack->interfaces()
+
+Crosses p_port() with i_index() to get physical names.
+
+=item $stack->i_physical()
+
+Returns a map to IID for ports that are physical ports, not vlans, etc.
+
+=item $stack->i_type()
+
+Crosses p_port() with p_type() and returns the results. 
+
+Overrides with ifType if p_type() isn't available.
+
+=item $stack->i_name()
+
+Crosses p_name with p_port and returns results.
+
+=item $stack->i_duplex()
+
+Crosses p_duplex with p_port and returns results.
+
+=item $stack->i_duplex_admin()
+
+Crosses p_duplex_admin with p_port.
+
+Munges bit_string returned from p_duplex_admin to get duplex settings.
+
+=back
+
+=head2 Module table
+
+This table holds configuration information for each of the blades installed in
+the Catalyst device.
+
+=over
+
+=item $stack->m_type()
+
+(B<moduleType>)
+
+=item $stack->m_model()
+
+(B<moduleModel>)
+
+=item $stack->m_serial()
+
+(B<moduleSerialNumber>)
+
+=item $stack->m_status()
+
+(B<moduleStatus>)
+
+=item $stack->m_name()
+
+(B<moduleName>)
+
+=item $stack->m_ports()
+
+(B<moduleNumPorts>)
+
+=item $stack->m_ports_status()
+
+Returns a list of space separated status strings for the ports.
+
+To see the status of port 4 :
+
+    @ports_status = split(' ', $stack->m_ports_status() );
+    $port4 = $ports_status[3];
+
+(B<modulePortStatus>)
+
+=item $stack->m_ports_hwver()
+
+(B<moduleHwVersion>)
+
+=item $stack->m_ports_fwver()
+
+(B<moduleFwVersion>)
+
+=item $stack->m_ports_swver()
+
+(B<moduleSwVersion>)
+
+=item $stack->m_ports_ip()
+
+(B<moduleIPAddress>)
+
+=item $stack->m_ports_sub1()
+
+(B<moduleSubType>)
+
+=item $stack->m_ports_sub2()
+
+(B<moduleSubType2>)
+
+=back
+
+=head2 Modules - Router Blades
+
+=over
+
+=item $stack->m_ip()
+
+(B<moduleIPAddress>)
+
+=item $stack->m_sub1()
+
+(B<moduleSubType>)
+
+=item $stack->m_sub2()
+
+(B<moduleSubType2>)
+
+=back
+
+=head2 Port Entry Table (CISCO-STACK-MIB::portTable)
+
+=over
+
+=item $stack->p_name()
+
+(B<portName>)
+
+=item $stack->p_type()
+
+(B<portType>)
+
+=item $stack->p_status()
+
+(B<portOperStatus>)
+
+=item $stack->p_status2()
+
+(B<portAdditionalStatus>)
+
+=item $stack->p_speed()
+
+(B<portAdminSpeed>)
+
+=item $stack->p_duplex()
+
+(B<portDuplex>)
+
+=item $stack->p_port()
+
+(B<portIfIndex>)
+
+=back
+
+=head2 Port Capability Table (CISCO-STACK-MIB::portCpbTable)
+
+=over
+
+=item $stack->p_speed_admin()
+
+(B<portCpbSpeed>)
+
+=item $stack->p_duplex_admin()
+
+(B<portCpbDuplex>)
+
+=back
+
+=cut

Info/CiscoStats.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::CiscoStats;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;
@@ -77,8 +77,9 @@ sub os {
     my $l2 = shift;
     my $descr = $l2->description();
 
-    return 'catalyst' if ($descr =~ /catalyst/i);
+    # order here matters - there are Catalysts that run IOS and have catalyst in their description field.
     return 'ios'      if ($descr =~ /IOS/);
+    return 'catalyst' if ($descr =~ /catalyst/i);
     return undef;
 }
 

Info/CiscoVTP.pm

@@ -0,0 +1,310 @@
+# SNMP::Info::CiscoVTP
+# Max Baker <max@warped.org>
+#
+# Copyright (c) 2003 Regents of the University of California
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without 
+# modification, are permitted provided that the following conditions are met:
+# 
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright notice,
+#       this list of conditions and the following disclaimer in the documentation
+#       and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the 
+#       names of its contributors may be used to endorse or promote products 
+#       derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoVTP;
+$VERSION = 0.7;
+# $Id$
+
+use strict;
+
+use Exporter;
+use SNMP::Info;
+
+use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
+@SNMP::Info::CiscoVTP::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoVTP::EXPORT_OK = qw//;
+
+$DEBUG=0;
+$SNMP::debugging=$DEBUG;
+
+$INIT    = 0;
+%MIBS    = (
+            'CISCO-VTP-MIB'         => 'vtpVlanName',
+           );
+
+%GLOBALS = (
+            'vtp_version'           => 'vtpVersion',
+            'vtp_maxstore'          => 'vtpMaxVlanStorage',
+            'vtp_notify'            => 'vtpNotificationsEnabled',
+            'vtp_notify_create'     => 'vtpVlanCreatedNotifEnabled',
+            'vtp_notify_delete'     => 'vtpVlanDeletedNotifEnabled',
+           );
+
+%FUNCS   = (
+            # Management Domain Table
+            'vtp_d_index'     => 'managementDomainIndex',
+            'vtp_d_name'      => 'managementDomainName',
+            'vtp_d_mode'      => 'managementDomainLocalMode',
+            'vtp_d_rev'       => 'managementDomainConfigRevNumber',
+            'vtp_d_updater'   => 'managementDomainLastUpdater',
+            'vtp_d_last'      => 'managementDomainLastChange',
+            'vtp_d_status'    => 'managementDomainRowStatus',
+            'vtp_d_tftp'      => 'managementDomainTftpServer',
+            'vtp_d_tftp_path' => 'managementDomainTftpPathname',
+            'vtp_d_pruning'   => 'managementDomainPruningState',
+            'vtp_d_ver'       => 'managementDomainVersionInUse',
+            #  VLAN Table
+            'v_index'    => 'vtpVlanIndex',
+            'v_state'    => 'vtpVlanState',
+            'v_type'     => 'vtpVlanType',
+            'v_name'     => 'vtpVlanName',
+            'v_mtu'      => 'vtpVlanMtu',
+            'v_said'     => 'vtpVlanDot10Said',
+            'v_ring'     => 'vtpVlanRingNumber',
+            'v_bridge'   => 'vtpVlanBridgeNumber',
+            'v_stp'      => 'vtpVlanStpType',
+            'v_parent'   => 'vtpVlanParentVlan',
+            'v_trans1'   => 'vtpVlanTranslationalVlan1',
+            'v_trans2'   => 'vtpVlanTranslationalVlan2',
+            'v_btype'    => 'vtpVlanBridgeType',
+            'v_hop_are'  => 'vtpVlanAreHopCount',
+            'v_hop_ste'  => 'vtpVlanSteHopCount',
+            'v_crf'      => 'vtpVlanIsCRFBackup',
+            'v_type_ext' => 'vtpVlanTypeExt',
+            'v_if'       => 'vtpVlanIfIndex',
+            # TODO Add these tables if someone wants them..
+            # vtpEditControlTable
+            # vtpVlanEditTable
+            # vtpStatsTable
+            # vlanTrunkPortTable
+           );
+
+%MUNGE   = (
+           );
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoVTP - Perl5 Interface to Cisco's VLAN Management MIB - CISCO-VTP-MIB
+
+=head1 AUTHOR
+
+Max Baker (C<max@warped.org>)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $vtp = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          # These arguments are passed directly on to SNMP::Session
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $vtp->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoVTP is a subclass of SNMP::Info that provides 
+information about a switch's VLANs.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+none.
+
+=head2 Required MIBs
+
+=over
+
+=item CISCO-VTP-MIB
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBALS
+
+=over
+
+=item $vtp->vtp_version()
+
+C<vtpVersion>
+
+=item $vtp->vtp_maxstore()
+
+C<vtpMaxVlanStorage>
+
+=item $vtp->vtp_notify()
+
+C<vtpNotificationsEnabled>
+
+=item $vtp->vtp_notify_create()
+
+C<vtpVlanCreatedNotifEnabled>
+
+=item $vtp->vtp_notify_delete()
+
+C<vtpVlanDeletedNotifEnabled>
+
+=back
+
+=head1 TABLE METHODS
+
+You device will only implement a subset of these methods.
+
+=head2 VLAN Table
+
+See ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityIndexing.html
+for a good treaty of how to connect to the VLANs
+
+=over
+
+=item $vtp->v_index()
+
+C<vtpVlanIndex>
+
+=item $vtp->v_state()
+
+C<vtpVlanState>
+
+=item $vtp->v_type()
+
+C<vtpVlanType>
+
+=item $vtp->v_name()
+
+C<vtpVlanName>
+
+=item $vtp->v_mtu()
+
+C<vtpVlanMtu>
+
+=item $vtp->v_said()
+
+C<vtpVlanDot10Said>
+
+=item $vtp->v_ring()
+
+C<vtpVlanRingNumber>
+
+=item $vtp->v_bridge()
+
+C<vtpVlanBridgeNumber>
+
+=item $vtp->v_stp()
+
+C<vtpVlanStpType>
+
+=item $vtp->v_parent()
+
+C<vtpVlanParentVlan>
+
+=item $vtp->v_trans1()
+
+C<vtpVlanTranslationalVlan1>
+
+=item $vtp->v_trans2()
+
+C<vtpVlanTranslationalVlan2>
+
+=item $vtp->v_btype()
+
+C<vtpVlanBridgeType>
+
+=item $vtp->v_hop_are()
+
+C<vtpVlanAreHopCount>
+
+=item $vtp->v_hop_ste()
+
+C<vtpVlanSteHopCount>
+
+=item $vtp->v_crf()
+
+C<vtpVlanIsCRFBackup>
+
+=item $vtp->v_type_ext()
+
+C<vtpVlanTypeExt>
+
+=item $vtp->v_if()
+
+C<vtpVlanIfIndex>
+
+=back
+
+=head2 Managment Domain Table
+
+=over
+
+=item $vtp->vtp_d_index()
+
+C<managementDomainIndex>
+
+=item $vtp->vtp_d_name()
+
+C<managementDomainName>
+
+=item $vtp->vtp_d_mode()
+
+C<managementDomainLocalMode>
+
+=item $vtp->vtp_d_rev()
+
+C<managementDomainConfigRevNumber>
+
+=item $vtp->vtp_d_updater()
+
+C<managementDomainLastUpdater>
+
+=item $vtp->vtp_d_last()
+
+C<managementDomainLastChange>
+
+=item $vtp->vtp_d_status()
+
+C<managementDomainRowStatus>
+
+=item $vtp->vtp_d_tftp()
+
+C<managementDomainTftpServer>
+
+=item $vtp->vtp_d_tftp_path()
+
+C<managementDomainTftpPathname>
+
+=item $vtp->vtp_d_pruning()
+
+C<managementDomainPruningState>
+
+=item $vtp->vtp_d_ver()
+
+C<managementDomainVersionInUse>
+
+=back
+
+=cut

Info/Entity.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Entity;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/EtherLike.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::EtherLike;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/Layer1.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/Layer1/Allied.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1::Allied;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 use strict;
 

Info/Layer1/Asante.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1::Asante;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 use strict;
 

Info/Layer2.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2;
-$VERSION = 0.5;
+$VERSION = 0.7;
 # $Id$
 
 use strict;
@@ -55,8 +55,8 @@ $INIT = 0;
           %SNMP::Info::Bridge::MIBS,
           %SNMP::Info::CDP::MIBS,
           %SNMP::Info::CiscoStats::MIBS,
-          'CISCO-PRODUCTS-MIB' => 'sysName',
+          'CISCO-PRODUCTS-MIB' => 'sysName',    # for model()
-          'CISCO-STACK-MIB'    => 'wsc1900sysID',
+          'CISCO-STACK-MIB'    => 'wsc1900sysID',    # some older catalysts live here
         );
 
 %GLOBALS = (

Info/Layer2/Aironet.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Aironet;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 use strict;
 

Info/Layer2/C2900.pm

@@ -28,24 +28,27 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::C2900;
-$VERSION = 0.5;
+$VERSION = 0.7;
 # $Id$
 use strict;
 
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::CiscoVTP;
 
-@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::Layer2 SNMP::Info::CiscoVTP Exporter/;
 @SNMP::Info::Layer2::C2900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
 
 # Set for No CDP
 %GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS
+            %SNMP::Info::Layer2::GLOBALS,
+            %SNMP::Info::CiscoVTP::GLOBALS,
             );
 
 %FUNCS   = (%SNMP::Info::Layer2::FUNCS,
+            %SNMP::Info::CiscoVTP::FUNCS,
             # C2900PortEntry
             'c2900_p_index'        => 'c2900PortIfIndex',
             'c2900_p_duplex'       => 'c2900PortDuplexStatus',
@@ -53,12 +56,13 @@ use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
             'c2900_p_speed_admin'  => 'c2900PortAdminSpeed',
            );
 
-%MIBS    = (
+%MIBS    = ( %SNMP::Info::Layer2::MIBS,
-            %SNMP::Info::Layer2::MIBS,
+             %SNMP::Info::CiscoVTP::MIBS,
-            'CISCO-C2900-MIB' =>  'ciscoC2900MIB'
+            'CISCO-C2900-MIB' => 'ciscoC2900MIB',
            );
 
 %MUNGE   = (%SNMP::Info::Layer2::MUNGE,
+            %SNMP::Info::CiscoVTP::MUNGE,
            );
 
 sub vendor {
@@ -134,6 +138,7 @@ sub interfaces {
     return \%if
 }
 
+1;
 __END__
 
 =head1 NAME
@@ -176,6 +181,8 @@ a more specific class using the method above.
 
 =item SNMP::Info::Layer2
 
+=item SNMP::Info::CiscoVTP
+
 =back
 
 =head2 Required MIBs
@@ -186,6 +193,12 @@ a more specific class using the method above.
 
 Part of the v2 MIBs from Cisco.
 
+=item Inherited Classes' MIBs
+
+See SNMP::Info::Layer2 for its own MIB requirements.
+
+See SNMP::Info::CiscoVTP for its own MIB requirements.
+
 =back
 
 =head1 GLOBALS
@@ -206,6 +219,10 @@ These are methods that return scalar value from SNMP
 
 See documentation in SNMP::Info::Layer2 for details.
 
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
 =head1 TABLE ENTRIES
 
 These are methods that return tables of information in the form of a reference
@@ -277,4 +294,8 @@ to a hash.
 
 See documentation in SNMP::Info::Layer2 for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
 =cut

Info/Layer2/Catalyst.pm

@@ -2,6 +2,7 @@
 # Max Baker <max@warped.org>
 #
 # Copyright (c) 2002,2003 Regents of the University of California
+# Copyright (c) 2003      Max Baker
 # All rights reserved.
 # 
 # Redistribution and use in source and binary forms, with or without 
@@ -28,16 +29,19 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Catalyst;
-$VERSION = 0.5;
+$VERSION = 0.7;
 # $Id$
 
 use strict;
 
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CiscoStack;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE $INIT/ ;
+use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
-@SNMP::Info::Layer2::Catalyst::ISA = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Catalyst::ISA = qw/SNMP::Info::CiscoStack SNMP::Info::Layer2 
+                                        SNMP::Info::CiscoVTP Exporter/;
 @SNMP::Info::Layer2::Catalyst::EXPORT_OK = qw//;
 
 $DEBUG=0;
@@ -47,82 +51,28 @@ $DEBUG=0;
 $INIT = 0;
 
 %MIBS =    ( %SNMP::Info::Layer2::MIBS, 
-             'CISCO-STACK-MIB' => 'moduleType',
+             %SNMP::Info::CiscoVTP::MIBS,
-             'CISCO-VTP-MIB'   => 'vtpVlanIndex'
+             %SNMP::Info::CiscoStack::MIBS,
            );
 
 %GLOBALS = (
             %SNMP::Info::Layer2::GLOBALS,
-            # these are in CISCO-STACK-MIB
+            %SNMP::Info::CiscoVTP::GLOBALS,
-            'sysip'       => 'sysIpAddr',    
+            %SNMP::Info::CiscoStack::GLOBALS,
-            'netmask'     => 'sysNetMask',    
-            'broadcast'   => 'sysBroadcast',
-            'serial'      => 'chassisSerialNumber',    
-            'model'       => 'chassisModel',    
-            'ps1_type'    => 'chassisPs1Type',    
-            'ps1_status'  => 'chassisPs1Status',    
-            'ps2_type'    => 'chassisPs2Type',    
-            'ps2_status'  => 'chassisPs2Status',    
-            'slots'       => 'chassisNumSlots',    
-            'fan'         => 'chassisFanStatus',
            );
 
 %FUNCS =   (
             %SNMP::Info::Layer2::FUNCS,
-            'i_type2'        => 'ifType',
+            %SNMP::Info::CiscoVTP::FUNCS,
-            # CISCO-STACK-MIB::moduleEntry
+            %SNMP::Info::CiscoStack::FUNCS,
-            #   These are blades in a catalyst device
-            'm_type'         => 'moduleType',
-            'm_model'        => 'moduleModel',
-            'm_serial'       => 'moduleSerialNumber',
-            'm_status'       => 'moduleStatus',
-            'm_name'         => 'moduleName',
-            'm_ports'        => 'moduleNumPorts',
-            'm_ports_status' => 'modulePortStatus',
-            'm_hwver'        => 'moduleHwVersion',
-            'm_fwver'        => 'moduleFwVersion',
-            'm_swver'        => 'moduleSwVersion',
-            # Router Blades :
-            'm_ip'           => 'moduleIPAddress',
-            'm_sub1'         => 'moduleSubType',
-            'm_sub2'         => 'moduleSubType2',
-            # CISCO-STACK-MIB::portEntry 
-            'p_name'    => 'portName',
-            'p_type'    => 'portType',
-            'p_status'  => 'portOperStatus',
-            'p_status2' => 'portAdditionalStatus',
-            'p_speed'   => 'portAdminSpeed',
-            'p_duplex'  => 'portDuplex',
-            'p_port'    => 'portIfIndex',
-            # CISCO-STACK-MIB::PortCpbEntry
-            'p_speed_admin'  => 'portCpbSpeed',
-            'p_duplex_admin' => 'portCpbDuplex',
-            # CISCO-VTP-MIB::VtpVlanEntry 
-            'v_state'   => 'vtpVlanState',
-            'v_type'    => 'vtpVlanType',
-            'v_name'    => 'vtpVlanName',
-            'v_mtu'     => 'vtpVlanMtu',
            );
 
 %MUNGE =   (
             %SNMP::Info::Layer2::MUNGE,
-            'm_ports_status' => \&munge_port_status,
+            %SNMP::Info::CiscoVTP::MUNGE,
-            'p_duplex_admin' => \&SNMP::Info::munge_bits,
+            %SNMP::Info::CiscoStack::MUNGE,
            );
 
-%PORTSTAT = (1 => 'other',
-             2 => 'ok',
-             3 => 'minorFault',
-             4 => 'majorFault');
-
-# Changes binary byte describing each port into ascii, and returns
-# an ascii list separated by spaces.
-sub munge_port_status {
-    my $status = shift;
-    my @vals = map($PORTSTAT{$_},unpack('C*',$status));
-    return join(' ',@vals);
-}
-
 # Overidden Methods
 
 # i_physical sets a hash entry as true if the iid is a physical port
@@ -139,98 +89,6 @@ sub i_physical {
     return \%i_physical;
 }
 
-sub i_type {
-    my $cat = shift;
-
-    my $p_port = $cat->p_port();
-    my $p_type  = $cat->p_type();
-
-    # Get more generic port types from IF-MIB
-    my $i_type  = $cat->i_type2();
-
-    # Now Override w/ port entries
-    foreach my $port (keys %$p_type) {
-        my $iid = $p_port->{$port};
-        $i_type->{$iid} = $p_type->{$port};  
-    }
-
-    return $i_type;
-}
-
-# p_* functions are indexed to physical port.  let's index these
-#   to snmp iid
-sub i_name {
-    my $cat = shift;
-
-    my $p_port = $cat->p_port();
-    my $p_name  = $cat->p_name();
-
-    my %i_name;
-    foreach my $port (keys %$p_name) {
-        my $iid = $p_port->{$port};
-        next unless defined $iid;
-        $i_name{$iid} = $p_name->{$port};
-    }
-    return \%i_name; 
-}
-
-sub i_duplex {
-    my $cat = shift;
-
-    my $p_port = $cat->p_port();
-    my $p_duplex  = $cat->p_duplex();
-
-    my %i_duplex;
-    foreach my $port (keys %$p_duplex) {
-        my $iid = $p_port->{$port};
-        $i_duplex{$iid} = $p_duplex->{$port};
-    }
-    return \%i_duplex; 
-}
-
-sub i_duplex_admin {
-    my $cat = shift;
-
-    my $p_port          = $cat->p_port();
-    my $p_duplex_admin  = $cat->p_duplex_admin();
-
-    my %i_duplex_admin;
-    foreach my $port (keys %$p_duplex_admin) {
-        my $iid = $p_port->{$port};
-        next unless defined $iid;
-        my $duplex = $p_duplex_admin->{$port};
-        next unless defined $duplex;
-
-        my $string = 'other';
-        # see CISCO-STACK-MIB for a description of the bits
-        $string = 'half' if ($duplex =~ /001$/ or $duplex =~ /0100.$/);
-        $string = 'full' if ($duplex =~ /010$/ or $duplex =~ /100.0$/);
-        # we'll call it auto if both full and half are turned on, or if the
-        #   specifically 'auto' flag bit is set.
-        $string = 'auto' 
-            if ($duplex =~ /1..$/ or $duplex =~ /110..$/ or $duplex =~ /..011$/);
-       
-        $i_duplex_admin{$iid} = $string;
-    }
-    return \%i_duplex_admin; 
-}
-
-# $cat->interfaces() - Maps the ifIndex table to a physical port
-sub interfaces {
-    my $self = shift;
-    my $interfaces = $self->i_index();
-    my $portnames  = $self->p_port();
-    my %portmap = reverse %$portnames;
-
-    my %interfaces = ();
-    foreach my $iid (keys %$interfaces) {
-        my $if = $interfaces->{$iid};
-        $interfaces{$if} = $portmap{$iid};
-    }
-
-    return \%interfaces;
-}
-
 sub vendor {
     return 'cisco';
 }
@@ -257,7 +115,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Catalyst - Perl5 Interface to Cisco devices running Catalyst OS 
+SNMP::Info::Layer2::Catalyst - Perl5 Interface to Cisco Catalyst 5000 series devices.
 
 =head1 AUTHOR
 
@@ -281,13 +139,16 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-SNMP::Info subclass to provide information for Cisco Catalyst switches running CatOS.
+SNMP::Info subclass to provide information for Cisco Catalyst 5000 series switches running CatOS.
 
 This subclass is not for all devices that have the name Catalyst.  Note that some Catalyst
 switches run IOS, like the 2900 and 3550 families.  Cisco Catalyst 1900 switches use their
 own MIB and have a separate subclass.  Use the method above to have SNMP::Info determine the
 appropriate subclass before using this class directly.
 
+This class includes the Catalyst 2950 series devices, which fall under the 
+Catalyst 5000 family.
+
 Note:  Some older Catalyst switches will only talk SNMP version 1.  Some newer ones will not
 return all their data if connected via Version 1.
 
@@ -302,20 +163,24 @@ a more specific class using the method above.
 
 =item SNMP::Info::Layer2
 
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CiscoStack
+
 =back
 
 =head2 Required MIBs
 
 =over
 
-=item CISCO-STACK-MIB
-
-=item CISCO-VTP-MIB
-
 =item Inherited Classes' MIBs
 
 See SNMP::Info::Layer2 for its own MIB requirements.
 
+See SNMP::Info::CiscoVTP for its own MIB requirements.
+
+See SNMP::Info::CiscoStack for its own MIB requirements.
+
 =back
 
 These MIBs are found in the standard v2 MIBs from Cisco.
@@ -326,22 +191,6 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $cat->broadcast()
-
-(B<sysBroadcast>)
-
-=item $cat->fan()
-
-(B<chassisFanStatus>)
-
-=item $cat->model()
-
-(B<chassisModel>)
-
-=item $cat->netmask()
-
-(B<sysNetMask>)
-
 =item $cat->os()
 
 Returns 'catalyst'
@@ -351,30 +200,6 @@ Returns 'catalyst'
 Tries to use the value from SNMP::Info::CiscoStats->os_ver() and if it fails 
 it grabs $cat->m_swver()->{1} and uses that.
 
-=item $cat->ps1_type()
-
-(B<chassisPs1Type>)
-
-=item $cat->ps2_type()
-
-(B<chassisPs2Type>)
-
-=item $cat->ps1_status()
-
-(B<chassisPs1Status>)
-
-=item $cat->ps2_status()
-
-(B<chassisPs2Status>)
-
-=item $cat->serial()
-
-(B<chassisSerialNumberString>)
-
-=item $cat->slots()
-
-(B<chassisNumSlots>)
-
 =item $cat->vendor()
 
 Returns 'cisco'
@@ -385,206 +210,29 @@ Returns 'cisco'
 
 See documentation in SNMP::Info::Layer2 for details.
 
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoStack
+
+See documentation in SNMP::Info::CiscoStack for details.
+
 =head1 TABLE ENTRIES
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Overrides
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
 
-=over
+See documentation in SNMP::Info::CiscoVTP for details.
-
-=item $cat->interfaces()
-
-Crosses p_port() with i_index() to get physical names.
-
-=item $cat->i_physical()
-
-Returns a map to IID for ports that are physical ports, not vlans, etc.
-
-=item $cat->i_type()
-
-Crosses p_port() with p_type() and returns the results. 
-
-Overrides with ifType if p_type() isn't available.
-
-=item $cat->i_name()
-
-Crosses p_name with p_port and returns results.
-
-=item $cat->i_duplex()
-
-Crosses p_duplex with p_port and returns results.
-
-=item $cat->i_duplex_admin()
-
-Crosses p_duplex_admin with p_port.
-
-Munges bit_string returned from p_duplex_admin to get duplex settings.
-
-=back
-
-=head2 Module table
-
-This table holds configuration information for each of the blades installed in
-the Catalyst device.
-
-=over
-
-=item $cat->m_type()
-
-(B<moduleType>)
-
-=item $cat->m_model()
-
-(B<moduleModel>)
-
-=item $cat->m_serial()
-
-(B<moduleSerialNumber>)
-
-=item $cat->m_status()
-
-(B<moduleStatus>)
-
-=item $cat->m_name()
-
-(B<moduleName>)
-
-=item $cat->m_ports()
-
-(B<moduleNumPorts>)
-
-=item $cat->m_ports_status()
-
-Returns a list of space separated status strings for the ports.
-
-To see the status of port 4 :
-
-    @ports_status = split(' ', $cat->m_ports_status() );
-    $port4 = $ports_status[3];
-
-(B<modulePortStatus>)
-
-=item $cat->m_ports_hwver()
-
-(B<moduleHwVersion>)
-
-=item $cat->m_ports_fwver()
-
-(B<moduleFwVersion>)
-
-=item $cat->m_ports_swver()
-
-(B<moduleSwVersion>)
-
-=item $cat->m_ports_ip()
-
-(B<moduleIPAddress>)
-
-=item $cat->m_ports_sub1()
-
-(B<moduleSubType>)
-
-=item $cat->m_ports_sub2()
-
-(B<moduleSubType2>)
-
-=back
-
-=head2 Modules - Router Blades
-
-=over
-
-=item $cat->m_ip()
-
-(B<moduleIPAddress>)
-
-=item $cat->m_sub1()
-
-(B<moduleSubType>)
-
-=item $cat->m_sub2()
-
-(B<moduleSubType2>)
-
-=back
-
-=head2 Port Entry Table (CISCO-STACK-MIB::portTable)
-
-=over
-
-=item $cat->p_name()
-
-(B<portName>)
-
-=item $cat->p_type()
-
-(B<portType>)
-
-=item $cat->p_status()
-
-(B<portOperStatus>)
-
-=item $cat->p_status2()
-
-(B<portAdditionalStatus>)
-
-=item $cat->p_speed()
-
-(B<portAdminSpeed>)
-
-=item $cat->p_duplex()
-
-(B<portDuplex>)
-
-=item $cat->p_port()
-
-(B<portIfIndex>)
-
-=back
-
-=head2 Port Capability Table (CISCO-STACK-MIB::portCpbTable)
-
-=over
-
-=item $cat->p_speed_admin()
-
-(B<portCpbSpeed>)
-
-=item $cat->p_duplex_admin()
-
-(B<portCpbDuplex>)
-
-=back
-
-=head2 VLAN Entry Table
-
-See ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityIndexing.html
-for a good treaty of how to connect to the VLANs
-
-=over
-
-=item $cat->v_state()
-
-(B<vtpVlanState>)
-
-=item $cat->v_type()
-
-(B<vtpVlanType>)
-
-=item $cat->v_name()
-
-(B<vtpVlanName>)
-
-=item $cat->v_mtu()
-
-(B<vtpVlanMtu>)
-
-=back
 
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in SNMP::Info::Layer2 for details.
 
+=head2 Table Methods imported from SNMP::Info::Layer2::CiscoSTack
+
+See documentation in SNMP::Info::Layer2::CiscoStack for details.
+
 =cut

Info/Layer2/HP.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::HP;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/Layer3.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/Layer3/Aironet.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::Aironet;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;
@@ -135,7 +135,9 @@ sub fw_mac {
     }
 
     foreach my $bs (keys %$bs_mac){
-        $fw_mac->{$bs} = $bs_mac->{$bs};
+        my $entry = $bs;
+        $entry =~ s/\.0$//;
+        $fw_mac->{$entry} = $bs_mac->{$bs};
     }
 
     return $fw_mac;
@@ -149,7 +151,9 @@ sub fw_port {
 
 
     foreach my $bs (keys %$bs_port){
-        $fw_port->{$bs} = $bs_port->{$bs};
+        my $entry = $bs;
+        $entry =~ s/\.0$//;
+        $fw_port->{$entry} = $bs_port->{$bs};
     }
 
     return $fw_port;

Info/Layer3/C3550.pm

@@ -2,6 +2,7 @@
 # Max Baker <max@warped.org>
 #
 # Copyright (c) 2003, Regents of the University of California
+# Copyright (c) 2003  Max Baker
 # All rights reserved.
 # 
 # Redistribution and use in source and binary forms, with or without 
@@ -28,16 +29,18 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::C3550;
-$VERSION = 0.5;
+$VERSION = 0.7;
 # $Id$
 
 use strict;
 
 use Exporter;
 use SNMP::Info::Layer3;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CiscoStack;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE $INIT/ ;
+use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
-@SNMP::Info::Layer3::C3550::ISA = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::C3550::ISA = qw/ SNMP::Info::Layer3 SNMP::Info::CiscoStack SNMP::Info::CiscoVTP  Exporter/;
 @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//;
 
 $DEBUG=0;
@@ -48,123 +51,38 @@ $INIT = 0;
 
 %MIBS = (
          %SNMP::Info::Layer3::MIBS,  
-         'CISCO-STACK-MIB' => 'moduleType',
+         %SNMP::Info::CiscoVTP::MIBS,
-         'CISCO-VTP-MIB'   => 'vtpVlanIndex'
+         %SNMP::Info::CiscoStack::MIBS,
         );
 
 %GLOBALS = (
             %SNMP::Info::Layer3::GLOBALS,
+            %SNMP::Info::CiscoVTP::GLOBALS,
+            %SNMP::Info::CiscoStack::GLOBALS,
             'ports2'      => 'ifNumber',
-            # these are in CISCO-STACK-MIB
-            'serial'      => 'chassisSerialNumberString',    
-            'ps1_type'    => 'chassisPs1Type',    
-            'ps1_status'  => 'chassisPs1Status',    
-            'ps2_type'    => 'chassisPs2Type',    
-            'ps2_status'  => 'chassisPs2Status',    
-            'fan'         => 'chassisFanStatus'
            );
 
 %FUNCS = (
             %SNMP::Info::Layer3::FUNCS,
-            'i_type2'        => 'ifType',
+            %SNMP::Info::CiscoVTP::FUNCS,
-            # CISCO-STACK-MIB::portEntry 
+            %SNMP::Info::CiscoStack::FUNCS,
-            'p_name'    => 'portName',
-            'p_type'    => 'portType',
-            'p_status'  => 'portOperStatus',
-            'p_status2' => 'portAdditionalStatus',
-            'p_speed'   => 'portAdminSpeed',
-            'p_duplex'  => 'portDuplex',
-            'p_port'    => 'portIfIndex',
-            # CISCO-STACK-MIB::PortCpbEntry
-            'p_speed_admin'  => 'portCpbSpeed',
-            'p_duplex_admin' => 'portCpbDuplex',
-            # CISCO-VTP-MIB::VtpVlanEntry 
-            'v_state'   => 'vtpVlanState',
-            'v_type'    => 'vtpVlanType',
-            'v_name'    => 'vtpVlanName',
-            'v_mtu'     => 'vtpVlanMtu',
          );
 
 %MUNGE = (
             # Inherit all the built in munging
             %SNMP::Info::Layer3::MUNGE,
-            'm_ports_status' => \&munge_port_status,
+            %SNMP::Info::CiscoVTP::MUNGE,
-            'p_duplex_admin' => \&SNMP::Info::munge_bits,
+            %SNMP::Info::CiscoStack::MUNGE,
          );
 
-%PORTSTAT = (1 => 'other',
+# Pick and choose
-             2 => 'ok',
-             3 => 'minorFault',
-             4 => 'majorFault');
 
-# Changes binary byte describing each port into ascii, and returns
+*SNMP::Info::Layer3::C3550::serial     = \&SNMP::Info::CiscoStack::serial;
-# an ascii list separated by spaces.
+*SNMP::Info::Layer3::C3550::interfaces = \&SNMP::Info::Layer3::interfaces;
-sub munge_port_status {
+*SNMP::Info::Layer3::C3550::i_duplex   = \&SNMP::Info::CiscoStack::i_duplex;
-    my $status = shift;
+*SNMP::Info::Layer3::C3550::i_duplex_admin = \&SNMP::Info::CiscoStack::i_duplex_admin;
-    my @vals = map($PORTSTAT{$_},unpack('C*',$status));
+*SNMP::Info::Layer3::C3550::i_name     = \&SNMP::Info::Layer3::i_name;
-    return join(' ',@vals);
+*SNMP::Info::Layer3::C3550::i_type     = \&SNMP::Info::CiscoStack::i_type;
-}
-
-# Overidden Methods
-
-sub i_type {
-    my $c3550 = shift;
-
-    my $p_port = $c3550->p_port();
-    my $p_type  = $c3550->p_type();
-
-    # Get more generic port types from IF-MIB
-    my $i_type  = $c3550->i_type2();
-
-    # Now Override w/ port entries
-    foreach my $port (keys %$p_type) {
-        my $iid = $p_port->{$port};
-        $i_type->{$iid} = $p_type->{$port};  
-    }
-
-    return $i_type;
-}
-
-sub i_duplex {
-    my $c3550 = shift;
-
-    my $p_port = $c3550->p_port();
-    my $p_duplex  = $c3550->p_duplex();
-
-    my %i_duplex;
-    foreach my $port (keys %$p_duplex) {
-        my $iid = $p_port->{$port};
-        $i_duplex{$iid} = $p_duplex->{$port};
-    }
-    return \%i_duplex; 
-}
-
-sub i_duplex_admin {
-    my $c3550 = shift;
-
-    my $p_port          = $c3550->p_port();
-    my $p_duplex_admin  = $c3550->p_duplex_admin();
-
-    my %i_duplex_admin;
-    foreach my $port (keys %$p_duplex_admin) {
-        my $iid = $p_port->{$port};
-        next unless defined $iid;
-        my $duplex = $p_duplex_admin->{$port};
-        next unless defined $duplex;
-
-        my $string = 'other';
-        # see CISCO-STACK-MIB for a description of the bits
-        $string = 'half' if ($duplex =~ /001$/ or $duplex =~ /0100.$/);
-        $string = 'full' if ($duplex =~ /010$/ or $duplex =~ /100.0$/);
-        # we'll call it auto if both full and half are turned on, or if the
-        #   specifically 'auto' flag bit is set.
-        $string = 'auto' 
-            if ($duplex =~ /1..$/ or $duplex =~ /110..$/ or $duplex =~ /..011$/);
-       
-        $i_duplex_admin{$iid} = $string;
-    }
-    return \%i_duplex_admin; 
-}
 
 sub vendor {
     return 'cisco';
@@ -173,10 +91,13 @@ sub vendor {
 sub model {
     my $c3550 = shift;
     my $id = $c3550->id();
-    my $model = &SNMP::translateObj($id);
+    my $model = &SNMP::translateObj($id) || $id;
     $model =~ s/^catalyst//;
-    $model =~ s/(24|48)$//;
 
+    # turn 355048 into 3550-48
+    if ($model =~ /^(35\d\d)(\d\d[T]?)$/) {
+        $model = "$1-$2";
+    }
     return $model;
 }
 
@@ -188,12 +109,13 @@ sub ports {
 
     my $id = $c3550->id();
     my $model = &SNMP::translateObj($id);
-    if ($model =~ /(24|48)$/) {
+    if ($model =~ /(12|24|48)[T]?$/) {
         return $1;
     }
     return $ports2;
 }
 
+
 1;
 __END__
 
@@ -240,15 +162,23 @@ a more specific class using the method above.
 
 =item SNMP::Info::Layer3
 
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CiscoStack
+
 =back
 
 =head2 Required MIBs
 
 =over
 
-=item CISCO-STACK-MIB
+=item Inherited Classes' MIBs
 
-=item CISCO-VTP-MIB
+See SNMP::Info::Layer3 for its own MIB requirements.
+
+See SNMP::Info::CiscoVTP for its own MIB requirements.
+
+See SNMP::Info::CiscoStack for its own MIB requirements.
 
 =back
 
@@ -258,30 +188,6 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $c3550->serial()
-(B<chassisSerialNumberString>)
-
-=item $c3550->model()
-(B<chassisModel>)
-
-=item $c3550->ps1_type()
-(B<chassisPs1Type>)
-
-=item $c3550->ps2_type()
-(B<chassisPs2Type>)
-
-=item $c3550->ps1_status()
-(B<chassisPs1Status>)
-
-=item $c3550->ps2_status()
-(B<chassisPs2Status>)
-
-=item $c3550->slots()
-(B<chassisNumSlots>)
-
-=item $c3550->fan()
-(B<chassisFanStatus>)
-
 =item $c3550->vendor()
 
     Returns 'cisco'
@@ -292,112 +198,29 @@ These are methods that return scalar value from SNMP
 
 See documentation in SNMP::Info::Layer3 for details.
 
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoStack
+
+See documentation in SNMP::Info::CiscoStack for details.
+
 =head1 TABLE ENTRIES
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Overrides
-
-=over
-
-=item $c3550->i_type()
-
-Crosses p_port() with p_type() and returns the results. 
-
-Overrides with ifType if p_type() isn't available.
-
-=item $c3550->i_name()
-
-Crosses p_name with p_port and returns results.
-
-=item $c3550->i_duplex()
-
-Crosses p_duplex with p_port and returns results.
-
-=item $c3550->i_duplex_admin()
-
-Crosses p_duplex_admin with p_port.
-
-Munges bit_string returned from p_duplex_admin to get duplex settings.
-
-=back
-
-=head2 Port Entry Table (CISCO-STACK-MIB::portTable)
-
-=over
-
-=item $c3550->p_name()
-
-(B<portName>)
-
-=item $c3550->p_type()
-
-(B<portType>)
-
-=item $c3550->p_status()
-
-(B<portOperStatus>)
-
-=item $c3550->p_status2()
-
-(B<portAdditionalStatus>)
-
-=item $c3550->p_speed()
-
-(B<portAdminSpeed>)
-
-=item $c3550->p_duplex()
-
-(B<portDuplex>)
-
-=item $c3550->p_port()
-
-(B<portIfIndex>)
-
-=back
-
-=head2 Port Capability Table (CISCO-STACK-MIB::portCpbTable)
-
-=over
-
-=item $c3550->p_speed_admin()
-
-(B<portCpbSpeed>)
-
-=item $c3550->p_duplex_admin()
-
-(B<portCpbDuplex>)
-
-=back
-
-=head2 VLAN Entry Table
-
-See ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityIndexing.html
-for a good treaty of how to connect to the VLANs
-
-=over
-
-=item $c3550->v_state()
-
-(B<vtpVlanState>)
-
-=item $c3550->v_type()
-
-(B<vtpVlanType>)
-
-=item $c3550->v_name()
-
-(B<vtpVlanName>)
-
-=item $c3550->v_mtu()
-
-(B<vtpVlanMtu>)
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in SNMP::Info::Layer3 for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStack
+
+See documentation in SNMP::Info::CiscoStack for details.
+
 =cut

Info/Layer3/C6500.pm

@@ -0,0 +1,204 @@
+# SNMP::Info::Layer3::C6500
+# Max Baker <max@warped.org>
+#
+# Copyright (c) 2003  Max Baker
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without 
+# modification, are permitted provided that the following conditions are met:
+# 
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright notice,
+#       this list of conditions and the following disclaimer in the documentation
+#       and/or other materials provided with the distribution.
+#     * Neither the name of the Author, nor 
+#       names of its contributors may be used to endorse or promote products 
+#       derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::C6500;
+$VERSION = 0.7;
+# $Id$
+
+use strict;
+
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CiscoStack;
+
+use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
+@SNMP::Info::Layer3::C6500::ISA = qw/ SNMP::Info::Layer3 SNMP::Info::CiscoStack SNMP::Info::CiscoVTP  Exporter/;
+@SNMP::Info::Layer3::C6500::EXPORT_OK = qw//;
+
+$DEBUG=0;
+
+# See SNMP::Info for the details of these data structures and 
+#       the interworkings.
+$INIT = 0;
+
+%MIBS = (
+         %SNMP::Info::Layer3::MIBS,  
+         %SNMP::Info::CiscoVTP::MIBS,
+         %SNMP::Info::CiscoStack::MIBS,
+        );
+
+%GLOBALS = (
+            %SNMP::Info::Layer3::GLOBALS,
+            %SNMP::Info::CiscoVTP::GLOBALS,
+            %SNMP::Info::CiscoStack::GLOBALS,
+           );
+
+%FUNCS = (
+            %SNMP::Info::Layer3::FUNCS,
+            %SNMP::Info::CiscoVTP::FUNCS,
+            %SNMP::Info::CiscoStack::FUNCS,
+         );
+
+%MUNGE = (
+            # Inherit all the built in munging
+            %SNMP::Info::Layer3::MUNGE,
+            %SNMP::Info::CiscoVTP::MUNGE,
+            %SNMP::Info::CiscoStack::MUNGE,
+         );
+
+# Pick and choose
+
+*SNMP::Info::Layer3::C6500::serial     = \&SNMP::Info::CiscoStack::serial;
+*SNMP::Info::Layer3::C6500::interfaces = \&SNMP::Info::Layer3::interfaces;
+*SNMP::Info::Layer3::C6500::i_duplex   = \&SNMP::Info::CiscoStack::i_duplex;
+#*SNMP::Info::Layer3::C6500::i_duplex_admin = \&SNMP::Info::Layer3::i_duplex_admin;
+*SNMP::Info::Layer3::C6500::i_name     = \&SNMP::Info::Layer3::i_name;
+*SNMP::Info::Layer3::C6500::i_type     = \&SNMP::Info::CiscoStack::i_type;
+
+sub model {
+    my $c6500 = shift;
+    my $model1 = $c6500->model1();
+    return $model1 if defined $model1;
+    return $c6500->SUPER::model();
+}
+
+sub vendor {
+    return 'cisco';
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::C6500 - Perl5 Interface to Cisco Catalyst 6500 Layer 2/3 Switches running IOS and/or CatOS
+
+=head1 AUTHOR
+
+Max Baker (C<max@warped.org>)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $c6500 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          # These arguments are passed directly on to SNMP::Session
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $c6500->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Cisco Catalyst 6500 Layer 2/3 Switches.  
+
+These devices run IOS but have some of the same charactersitics as the Catalyst WS-C family (5xxx). 
+For example, forwarding tables are held in VLANs, and extened interface information
+is gleened from CISCO-SWITCH-MIB.
+
+For speed or debugging purposes you can call the subclass directly, but not after determining
+a more specific class using the method above. 
+
+ my $c6500 = new SNMP::Info::Layer3::C6500(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CiscoStack
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See SNMP::Info::Layer3 for its own MIB requirements.
+
+See SNMP::Info::CiscoVTP for its own MIB requirements.
+
+See SNMP::Info::CiscoStack for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $c6500->vendor()
+
+    Returns 'cisco'
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in SNMP::Info::Layer3 for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoStack
+
+See documentation in SNMP::Info::CiscoStack for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in SNMP::Info::Layer3 for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in SNMP::Info::CiscoVTP for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStack
+
+See documentation in SNMP::Info::CiscoStack for details.
+
+=cut
+

Info/Layer3/Foundry.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::Foundry;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

Info/MAU.pm

@@ -28,7 +28,7 @@
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::MAU;
-$VERSION = 0.5;
+$VERSION = 0.6;
 # $Id$
 
 use strict;

MANIFEST

@@ -24,3 +24,4 @@ MANIFEST
 Makefile.PL
 README
 t/prereq.t
+t/test_class.pl

README

@@ -5,7 +5,7 @@ NAME
 
 VERSION
 
-    SNMP::Info - Version 0.5
+    SNMP::Info - Version 0.6
 
 AUTHOR
 
@@ -946,6 +946,7 @@ EXTENDING SNMP::INFO
      =head2 Overrides
      =cut
 
+     1; # don't forget this line
     ----------------------- snip --------------------------------
 
     Be sure and send the debugged version to snmp@warped.org to be included

t/make_dev_matrix.pl

@@ -0,0 +1,294 @@
+#!/usr/bin/perl -w
+
+# $Id$
+
+$DevMatrix = '../DeviceMatrix.txt';
+$DevHTML   = 'DeviceMatrix.html';
+$DevPNG    = 'DeviceMatrix.png';
+$Attributes= {};
+
+# Parse Data File
+$matrix = parse_data($DevMatrix);
+
+# Graph it for fun
+eval "use GraphViz::Data::Structure;";
+if ($@ or 1) {
+    print "GraphViz::Data::Structure not installed.\n";
+} else {
+    my $gvds = GraphViz::Data::Structure->new($matrix);
+    $gvds->graph()->as_png($DevPNG);
+}
+
+open (HTML, "> $DevHTML") or die "Can't open $DevHTML. $!\n";
+$old_fh = select(HTML);
+&html_head;
+print_vendors($matrix);
+foreach my $vendor (sort sort_nocase keys %$matrix){
+    print "<A NAME=\"$vendor\"><SPAN CLASS=\"vendor\"><B>$vendor</B></SPAN></A>\n";
+    print "<DL>\n";
+
+    my $vendor_defaults = $matrix->{$vendor}->{defaults};
+    print_notes($vendor_defaults,1);
+
+    my $families = $matrix->{$vendor}->{families};
+    foreach my $family (sort sort_nocase keys %$families ) {
+        print "<DT>$family Family\n";
+
+        my $family_defaults = $families->{$family}->{defaults};
+        print_notes($family_defaults,2);
+
+        my $models = $families->{$family}->{models};
+        foreach my $model (sort sort_nocase keys %$models ){
+            my $model_defaults = $models->{$model}->{defaults};
+            print "<DD>$model\n";
+            print "<DL>\n";
+            print_notes($model_defaults,3);
+
+            print "<DT><DD><TABLE BORDER=1>\n";
+            print_headers();
+            print "<TR>\n";
+            foreach my $a (sort sort_nocase keys %$Attributes) {
+                my $val;
+                next if $a eq 'note';
+                $val = ['-'];
+                $class = 'none';
+                if (defined $model_defaults->{$a}) {
+                    $val = $model_defaults->{$a};
+                    $class = 'model';
+                } elsif (defined $family_defaults->{$a}){
+                    $val = $family_defaults->{$a};
+                    $class = 'family';
+                } elsif (defined $vendor_defaults->{$a}){
+                    $val = $vendor_defaults->{$a};
+                    $class = 'vendor';
+                } 
+                print "  <TD CLASS='$class'>",join("<BR>\n",@$val),"</TD>\n";
+            }
+            print "</TR></TABLE>\n";
+            print "</DL>\n";
+        }
+    }
+    print "</DL>\n";
+}
+
+
+&html_tail;
+
+select ($old_fh);
+close (HTML) or die "Can't write $DevHTML. $!\n";
+
+# Data Structures
+
+# Matrix =
+#   ( vendor => { families  => { family => family_hash },
+#                  defaults => { cmd    => [values]    },
+#               }
+#   )
+
+# Family Hash
+#   ( models   => { model => model_hash },
+#     defaults => { cmd   => [values]   }
+#   )
+
+# Model Hash
+#   ( defaults => { cmd => [values] } )
+sub parse_data {
+    my $file = shift;
+    my $Matrix;
+
+    my @Lines;
+    open (DM, "< $file") or die "Can't open $file. $!\n";
+    {
+        @Lines = <DM>;
+    }
+    close (DM);
+
+    my ($device,$family,$vendor,$class);
+    foreach my $line (@Lines){
+        chomp($line);
+        # Comments
+        $line =~ s/#.*//;
+
+        # Blank Lines
+        next if $line =~ /^\s*$/;
+
+        # Trim whitespace
+        $line =~ s/^\s+//;
+        $line =~ s/\s+$//;
+
+        my ($cmd,$value);
+        if ($line =~ /^([a-z-_]+)\s*:\s*(.*)$/) {
+            $cmd = $1;  $value = $2; 
+        } else {
+            print "What do i do with this line : $line \n";
+            next;
+        }
+
+        # Set Class {vendor,family,device}
+        if ($cmd eq 'device-vendor'){
+            $vendor = $value;
+            $family = $model = undef;
+            $Matrix->{$vendor} = {} unless defined $Matrix->{$vendor};
+            $class = $Matrix->{$vendor};
+            $class->{defaults}->{type}='vendor';
+            next;
+        }
+
+        if ($cmd eq 'device-family'){
+            $family = $value;
+            $model = undef;
+            print "$family has no vendor.\n" unless defined $vendor;
+            $Matrix->{$vendor}->{families}->{$family} = {} 
+                unless defined $Matrix->{$vendor}->{families}->{$family};
+            $class = $Matrix->{$vendor}->{families}->{$family};
+            $class->{defaults}->{type}='family';
+            next;
+        }   
+
+        if ($cmd eq 'device') {
+            $model = $value;
+            print "$model has no family.\n" unless defined $family;
+            print "$model has no vendor.\n" unless defined $vendor;
+            $Matrix->{$vendor}->{families}->{$family}->{models}->{$model} = {} 
+                unless defined $Matrix->{$vendor}->{families}->{$family}->{models}->{$model};
+            $class = $Matrix->{$vendor}->{families}->{$family}->{models}->{$model};
+            $class->{defaults}->{type}='device';
+            next;
+        }
+
+        # Store attribute
+        push (@{$class->{defaults}->{$cmd}} , $value);
+        $Attributes->{$cmd}++;
+    }
+
+    return $Matrix;
+}
+
+sub sort_nocase {
+    return lc($a) cmp lc($b);
+}
+
+sub print_notes {
+    my $defaults = shift;
+    my $level    = shift;
+    my $notes    = $defaults->{note} || [];
+    foreach my $note (@$notes){
+        if ($note =~ s/^!//){
+            $note = '<SPAN CLASS="note">' . $note . '</SPAN>';
+        }
+    }
+    if (scalar @$notes){
+        print "<DT>\n";
+        my $print_note = join("\n<LI>",@$notes);
+        print "<UL TYPE='square'><LI>$print_note</UL>\n";
+    }
+}
+
+sub print_vendors {
+    my $matrix=shift;
+    print "<h1>Device Vendors</h1>\n";
+    foreach my $vendor (sort sort_nocase keys %$matrix){
+        print "[<A HREF=\"#$vendor\">$vendor</A>]\n";
+    }
+    print "<HR>\n";
+}
+
+sub html_head {
+    print <<"end_head";
+<HTML>
+<HEAD>
+<TITLE>SNMP::Info - Device Compatibility Matrix</TITLE>
+<STYLE TYPE="text/css" MEDIA="screen">
+<!--
+    BODY    { font-family:arial,helvetica,sans-serif; font-size:12pt; }
+    TD      { font-family:arial,helvetica,sans-serif; font-size:10pt; }
+    TH      { font-family:arial,helvetica,sans-serif; font-size:10pt; background:#F0F0F0; }
+    H1      { font-family:arial,helvetica,sans-serif; font-size:14pt; }
+    .vendor { font-size:12pt; color:#777777; }
+    .family { font-size:12pt; color:blue; }
+    .model  { font-size:12pt; color:red; }
+    .note   { color:red; } 
+//-->
+</STYLE>
+</HEAD>
+<BODY>
+<h1>SNMP::Info - Device Compatibility Matrix</h1>
+<P>
+end_head
+}
+
+sub html_tail {
+    print <<'end_tail';
+<HR>
+<h1>Color Key</h1>
+[<SPAN CLASS="model">Model Attribute</SPAN>]
+[<SPAN CLASS="family">Family Attribute</SPAN>]
+[<SPAN CLASS="vendor">Vendor Attribute</SPAN>]
+<h1>Attribute Key</h1>
+<TABLE BORDER=1>
+<TR>
+    <TD>Arpnip</TD>
+    <TD>Ability to collect ARP tables for MAC to IP translation.</TD>
+</TR>
+<TR>
+    <TD>CDP</TD>
+    <TD>Cisco Discovery Protocol usable.
+        <UL>
+            <LI><tt>Yes</tt> - Has CDP information through CISCO-CDP-MIB
+            <LI><tt>Proprietary</tt> means the device has its own L2 Discovery Protocol.
+        </UL>
+    </TD>
+</TR>
+<TR>
+    <TD>Class</TD>
+    <TD>SNMP::Info Class the the device currently uses.  Devices using more generic
+        interfaces like <tt>Layer2</tt> or <tt>Layer3</tt> may eventually get their
+        own subclass.
+    </TD>
+</TR>
+<TR>
+    <TD>Duplex</TD>
+    <TD>Ability to cull duplex settings from device.<BR>
+        <UL>
+            <LI><tt>no</tt> - Can't recover current or admin setting.
+            <LI><tt>link</tt> - Can get current setting only.
+            <LI><tt>both</tt> - Can get admin and link setting.
+        </UL>
+    </TD>
+</TR>
+<TR>
+    <TD>Macsuck</TD>
+    <TD>Ability to get CAM tables for MAC to switch port mapping.<BR>
+        <UL>
+            <LI><TT>no</TT> - Have not found an SNMP method to get data yet.
+            <LI><TT>yes</TT> - Can get through normal SWITCH-MIB method.
+            <LI><TT>vlan</TT> - Have to re-connect to each VLAN and then fetch with normal
+        method.
+        </UL>
+    </TD>
+</TR>
+<TR>
+    <TD>Portmac</TD>
+    <TD>Whether the device will list the MAC address of the switch port on each
+        switch port when doing a Macsuck.
+    </TD>
+</TR>
+<TR>
+    <TD>Ver</TD>
+    <TD>SNMP Protocol Version the device has to use.</TD>
+</TR>
+</TABLE>
+</BODY>
+</HTML>
+end_tail
+    
+}
+
+sub print_headers {
+    print "<TR>\n";
+    foreach my $a (sort sort_nocase keys %$Attributes) {
+        next if $a eq 'note';
+        print "  <TH>$a</TH>\n";
+    }
+    print "</TR>\n";
+}

t/test_class.pl

@@ -0,0 +1,149 @@
+#!/usr/bin/perl -w
+#
+# test_class.pl
+#
+#   Test a device class in SNMP::Info against a device.
+#
+# Max Baker <max@warped.org>
+#
+# $Id$
+#
+
+use lib '/usr/local/netdisco';
+use SNMP::Info;
+use Getopt::Long;
+use strict;
+use vars qw/$Class $Dev $Comm $Ver/;
+
+# Default Values
+$Class = '';
+$Dev   = '';
+$Comm  = '';
+$Ver   = 2;
+
+GetOptions ('c|class=s' => \$Class,
+            'd|dev=s'   => \$Dev,
+            's|comm=s'  => \$Comm,
+            'v|ver=i'   => \$Ver,
+            'h|help'    => \&usage,
+           );
+
+
+&usage unless ($Dev and $Comm);
+
+$Class = $Class ? "SNMP::Info::$Class" : 'SNMP::Info';
+eval "require $Class;";
+if ($@) {
+    die "Can't load Class specified : $Class.\n\n$@\n";
+}
+
+print "Class $Class loaded.\n";
+
+my $dev = new $Class( 'AutoSpecify' => 0,
+                      'AutoVerBack' => 0,
+                      'Version'     => $Ver,
+                      'Debug'       => 0,
+                      'DestHost'    => $Dev,
+                      'Community'   => $Comm
+                    ) or die "\n"; 
+
+print "Connected to $Dev.\n";
+    
+my $layers = $dev->layers();
+
+unless (defined $layers){
+    warn "Are you sure you got the right community string and version?\nCan't fetch layers.\n";
+}
+
+print "Fetching global info...\n\n";
+
+my @globals = qw/description uptime contact name location layers ports mac serial
+                ps1_type ps2_type ps1_status ps2_status fan slots vendor os os_ver/;
+
+foreach my $global (@globals){
+    test_global($dev,$global);
+}
+
+print "\nFetching interface info...\n\n";
+
+my @fns = qw/interfaces i_type i_ignore i_description i_mtu i_speed i_mac i_up
+             i_up_admin i_name i_duplex i_duplex_admin i_stp_state/;
+
+foreach my $fn (@fns){
+    test_fn($dev,$fn);
+}
+
+print "\nTesting Misc...\n\n";
+my @misc = qw/v_name v_port/;
+foreach my $fn (@misc){
+    test_fn($dev,$fn);
+}
+
+#--------------------------------
+sub test_global {
+    my $dev    = shift;
+    my $method = shift;
+
+    my $value;
+    eval {
+        $value = $dev->$method();
+    };
+    
+    if ($@){
+        my $err = $@;
+        $err =~ s/[[:cntrl:]]+/ /g;
+        printf "%-20s Blew up. $err\n",$method;
+        return 0;
+    }
+    
+    unless (defined $value){
+        printf "%-20s Does not exist.\n",$method;
+        return 0;
+    }
+    $value =~ s/[[:cntrl:]]+/ /g;
+    if (length $value > 60) {
+        $value = substr($value,0,60);
+        $value .= '...';
+    }
+    printf "%-20s %s \n",$method,$value;
+    return 1;
+}
+
+sub test_fn {
+    my $dev = shift;    
+    my $method = shift;
+
+    my $results;
+
+    eval {
+        $results = $dev->$method();
+    };
+
+    if ($@){
+        my $err = $@;
+        $err =~ s/\n/ /g;
+        printf "%-20s Blew up. $err\n",$method;
+        return 0;
+    }
+
+    unless (defined $results and scalar keys %$results) {
+        printf "%-20s Empty Results.\n",$method;
+        return 0;
+    }
+
+    printf "%-20s %d rows.\n",$method, scalar(keys %$results);
+    return 1;
+}
+
+sub usage {
+    print << "end_usage";
+
+test_class - Test a device against an SNMP::Info class
+    -c  --class Layer2::Catalyst
+    -d  --dev   myswitch
+    -s  --comm  public
+    -v  --ver   2
+
+end_usage
+    exit;
+}