# SNMP::Info::Layer2::C1900
# Max Baker <max@warped.org>
#
# Copyright (c) 2002,2003 Regents of the University of California
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions are met:
# 
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright notice,
#       this list of conditions and the following disclaimer in the documentation
#       and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the 
#       names of its contributors may be used to endorse or promote products 
#       derived from this software without specific prior written permission.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::Layer2::C1900;
$VERSION = 0.3;
# $Id$
use strict;

use Exporter;
use SNMP::Info::Layer2;

@SNMP::Info::Layer2::C1900::ISA = qw/SNMP::Info::Layer2 Exporter/;
@SNMP::Info::Layer2::C1900::EXPORT_OK = qw//;

use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;

# Set for No CDP
%GLOBALS = (
            %SNMP::Info::Layer2::GLOBALS
            );

%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
            'i_type2'              => 'ifType',
            # ESSWITCH-MIB
            'c1900_p_index'        => 'swPortIndex',
            'c1900_p_ifindex'      => 'swPortIfIndex',
            'c1900_p_duplex'       => 'swPortDuplexStatus', 
            'c1900_p_duplex_admin' => 'swPortFullDuplex', 
            'c1900_p_name'         => 'swPortName', 
            'c1900_p_up_admin'     => 'swPortAdminStatus', 
            'c1900_p_type'         => 'swPortMediaCapability',
            'c1900_p_media'        => 'swPortConnectorType',
            );

%MIBS    = (
            %SNMP::Info::Layer2::MIBS,
            # Also known as the ESSWITCH-MIB
            'STAND-ALONE-ETHERNET-SWITCH-MIB' =>  'series2000'
            );

%MUNGE   = (%SNMP::Info::Layer2::MUNGE,
            );

sub vendor {
    return 'cisco';
}

sub i_duplex {
    my $c1900 = shift;
    
    my $interfaces     = $c1900->interfaces();
    my $c1900_p_index  = $c1900->c1900_p_index();
    my $c1900_p_duplex = $c1900->c1900_p_duplex();
 

    my %reverse_1900 = reverse %$c1900_p_index;

    my %i_duplex;
    foreach my $if (keys %$interfaces){
        my $port_1900 = $reverse_1900{$if};
        next unless defined $port_1900;
        my $duplex = $c1900_p_duplex->{$port_1900};
        next unless defined $duplex; 
    
        $duplex = 'half' if $duplex =~ /half/i;
        $duplex = 'full' if $duplex =~ /full/i;
        $i_duplex{$if}=$duplex; 
    }
    return \%i_duplex;
}

sub i_duplex_admin {
    my $c1900 = shift;
    
    my $interfaces     = $c1900->interfaces();
    my $c1900_p_index  = $c1900->c1900_p_index();
    my $c1900_p_admin  = $c1900->c1900_p_duplex_admin();
 

    my %reverse_1900 = reverse %$c1900_p_index;

    my %i_duplex_admin;
    foreach my $if (keys %$interfaces){
        my $port_1900 = $reverse_1900{$if};
        next unless defined $port_1900;
        my $duplex = $c1900_p_admin->{$port_1900};
        next unless defined $duplex; 
    
        $duplex = 'half' if $duplex =~ /disabled/i;
        $duplex = 'full' if $duplex =~ /flow control/i;
        $duplex = 'full' if $duplex =~ /enabled/i;
        $duplex = 'auto' if $duplex =~ /auto/i;
        $i_duplex_admin{$if}=$duplex; 
    }
    return \%i_duplex_admin;
}

sub i_type {
    my $c1900 = shift;

    my $i_type        = $c1900->i_type2();
    my $c1900_p_index = $c1900->c1900_p_index();
    my $c1900_p_type  = $c1900->c1900_p_type();
    my $c1900_p_media = $c1900->c1900_p_media();

    foreach my $p_iid (keys %$c1900_p_index){
        my $port  = $c1900_p_index->{$p_iid};
        my $type  = $c1900_p_type->{$p_iid};
        my $media = $c1900_p_media->{$p_iid};

        next unless defined $port;
        next unless defined $type;
        next unless defined $media;

        $i_type->{$port} = "$type $media";
    }

    return $i_type;
}
__END__

=head1 NAME

SNMP::Info::Layer2::C1900 - SNMP Interface to old C1900 Network Switches

=head1 DESCRIPTION

Provides abstraction to the configuration information obtainable from a 
C1900 device through SNMP. See inherited classes' documentation for 
inherited methods.

Inherits from:

 SNMP::Info::Layer2

Required MIBs:

 STAND-ALONE-ETHERNET-SWITCH-MIB (ESSWITCH-MIB)
 MIBs listed in SNMP::Info::Layer2

ESSWITCH-MIB is included in the Version 1 MIBS from Cisco.
They can be found at ftp://ftp.cisco.com/pub/mibs/v1/v1.tar.gz

=head1 AUTHOR

Max Baker (C<max@warped.org>)

=head1 SYNOPSIS

 my $c1900 = new SNMP::Info::Layer2::C1900(DestHost  => 'mycat1900' , 
                              Community => 'public' ); 

=head1 CREATING AN OBJECT

=over

=item  new SNMP::Info::Layer2::C1900()

Arguments passed to new() are passed on to SNMP::Session::new()
    

    my $c1900 = new SNMP::Info::Layer2::C1900(
        DestHost => $host,
        Community => 'public',
        Version => 3,...
        ) 
    die "Couldn't connect.\n" unless defined $c1900;

=back

=head1 GLOBALS

=over

=item $c1900->vendor()

Returns 'cisco' :)

=back

=head1 TABLE ENTRIES

=head2 Overrides

=over

=item $c1900->i_duplex()

Returns reference to map of IIDs to current link duplex

Crosses $c1900->c1900_p_index() with $c1900->c1900_p_duplex;

=item $c1900->i_duplex_admin()

Returns reference to hash of IIDs to admin duplex setting

Crosses $c1900->c1900_p_index() with $c1900->c1900_p_duplex_admin;

=item $c1900->i_type()

Returns reference to hash of IID to port type

Takes the default ifType and overrides it with 

c1900_p_type() and c1900_p_media()  if they exist.

=back

=head2 STAND-ALONE-ETHERNET-SWITCH-MIB Switch Port Table Entries:

=over

=item $c1900->c1900_p_index()

Maps the Switch Port Table to the IID

B<swPortIfIndex>

=item $c1900->c1900_p_duplex()

Gives Port Duplex Info

B<swPortDuplexStatus>

=item $c1900->c1900_p_duplex_admin()

Gives admin setting for Duplex Info

B<swPortFullDuplex>

=item $c1900->c1900_p_name()

Gives human set name for port 

B<swPortName>

=item $c1900->c1900_p_up_admin()

Gives Admin status of port enabled.

B<swPortAdminStatus>

=item $c1900->c1900_p_type()

Gives Type of port, ie. "general-ethernet"

B<swPortMediaCapability>

=item $c1900->c1900_p_media()

Gives the media of the port , ie "fiber-sc"

B<swPortConnectorType>

=back

=cut