# SNMP Device Compatibility Matrix # SNMP::Info - (C) 2004 Max Baker # This file is meant to detail the cababilities # of network devices to supply data via SNMP. # $Id$ # Airespace (pre-Cisco) device-vendor: Airespace cdp:no arpnip: no macsuck: yes portmac: yes duplex: both vlan: yes modules: yes class: Layer2::Airespace note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports. note: Device will only communicate with SNMP version configured in the controller. device-family: Airespace Wireless Controllers device: 3500, 4101, 4102 # Allied device-vendor: Allied Telesyn cdp:no class: Layer1::Allied ver: 1 arpnip: no macsuck: no duplex: no device-family: Allied Hubs device: AT-3624T device-family: AT-8000 Switches class: Layer2::Allied ver: 2 macsuck: yes # Aruba device-vendor: Aruba arpnip: no macsuck: yes portmac: yes duplex: no class: Layer2::Aruba note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports. device-family: Aruba Wireless Controllers device: 5000 # Asante device-vendor: Asante class: Layer1::Asante ver: 1 arpnip: no macsuck: no duplex: no device-family: Asante Hubs device: 1012 # Bay device-vendor: Bay note: See Nortel # CISCO device-vendor: Cisco cdp: yes ver: 2 modules: yes note: Error in CISCO-TC-MIB. See README for how to patch. device-family: Aironet note: IOS and Aironet OS versions class: Layer3::Aironet device: AIRAP1100, AP1200, C1100, C1130, C1240 note: IOS based device class: Layer2::Aironet device: BR500 note: Aironet based device device: AP350, AP340, CAP350, CAP340, 1200, AP4800 note: Aironet based device device-family: 1000 duplex: no ver: 1 class: Layer3::Cisco device: 1003 device-family: 1700 class: Layer3::Cisco device: 1710 duplex: link device-family: 2500 duplex: no macsuck: yes arpnip: yes ver: 1 class: Layer3::Cisco device: 2501,2503,2511,2514 device: AS2509RJ,AS2511RJ device-family: 2600 duplex: link arpnip: yes macsuck: yes class: Layer3::Cisco device:2610,2610XM,2611,2620,2620XM,2621,2621XM device:2651XM device:2691 device-family: 2800 duplex: link arpnip: yes macsuck: yes class: Layer3::Cisco device: 2811,2821,2851 device-family: 3600 class: Layer3::Cisco device: 3620 device: 3640 duplex: no device-family:7200 class: Layer3::Cisco note: !"When scanning my network with netdisco I would find that my 7200 series router running Cisco IOS Software Release 12.2(1) would reboot when scanning for CDP neighbours, to solve the issue I upgraded to Cisco IOS Software Release Version 12.2(37)" device-family: 7500 class: Layer3::Cisco device: 7507 duplex: no note: !Duplex settings are falsely reported in older IOS versions device-family: AS5000 duplex: no class: Layer3::Cisco device: AS5300 # # Cisco - Catalyst # device-family: Catalyst 1900 note: !Upgrade older (pre 9.0) versions of CatOS note: !CatOS ver 9.00.03 through 9.00.06 have problems when trunking. Upgrade to 9.00.07 or higher. ver: 1 duplex: both vlan: write class: Layer2::C1900 device: wsc1900c device-family: Catalyst 1900 device: wsc1900 device-family: Catalyst 1900 device-family: Catalyst 2900 note: IOS macsuck: vlan duplex: write vlan: write class: Layer2::C2900 portmac: yes note: !Pre IOS 11.2 (8) SA3 - PortMAC shows up in CAM table. device: 2908xl note: !Pre IOS 11.2 (8.6) some features (duplex...) aren't present. device: 2912MfXL device: 2924MXL ver: 1 device: 2924CXL device: 2924CXLv device-family: Catalyst 2940 note: IOS macsuck: vlan duplex: write vlan: write class: Layer2::C2900 portmac: yes device: 2940-8TT device-family: Catalyst 2950 note: IOS macsuck: vlan duplex: write vlan: write class: Layer2::C2900 portmac: yes device: 2950-t24 device-family: Catalyst 2970 macsuck:vlan duplex: write vlan: write note: Acts just like IOS Catalyst 6500 series class: Layer3::C6500 device: 2960, 2970G-24T-E device-family: Catalyst 3500 XL portmac: yes macsuck: vlan duplex: write vlan: write note: L2 only IOS devices - Just like Catalyst 2900 series from SNMP note: IOS Version 12.0(5)XP is buggy and doesn't do VLAN Community indexing correctly. class: Layer2::C2900 device: 3508GXL device: 3524XL device: 3548XL device-family: Catalyst 3550 macsuck: vlan duplex: write vlan: write class: Layer3::C3550 note: Run IOS note: Has VLANs that don't accept SNMP connections. Don't know if they are standard (by name or number). note: Uses CISCO-STACK-MIB like Catalyst 5000 series for serial,duplex,type but not name note: Comes in flavors that support L2, L3 or combo. device: 3550-12T device: 3400 w/ MetroBase Image device: 3550 note: L2/L3 Switch arpnip: yes device: 3550-24, 3550-48 macsuck: vlan device-family: Catalyst 3750 class: Layer3::C6500 device: 3750 device-family: Catalyst 4000 duplex: write macsuck: vlan vlan: write class: Layer2::Catalyst note: Comes in IOS and CatOS versions like the 6k series. note: CatOS versions like L2::Catalyst just fine. note: !Reported problems with SNMP taking up all the CPU. Requests take significantly longer. note: !IOS Version 12.1.8a reported not to respond to BRIDGE-MIB calls. device: wsc4003, wsc4006 device: wsc4503, wsc4506 device: wsc4912g note: Dedicated 12 port gig-e switch device: 4006 duplex: both class: Layer3::C4000 note: !Has serious slowdown/timeout problems with SNMP note: !IOS Software Release 12.2(20)EW or higher required for duplex support device: 4503, 4506, 4507, 4510 duplex: both class: Layer3::C4000 note: !Has serious slowdown/timeout problems with SNMP note: !IOS Software Release 12.2(20)EW or higher required for duplex support device-family: Catalyst 5000 duplex: write vlan: write class: Layer2::Catalyst note: Port info in CISCO-STACK-MIB device: wsc2926 note: !Can give false information over SNMP at times. device: wsc2948g device: wsc2980g note: !Macsuck not working? device: wsc5000 note: !Has nasty tendency to not give you all SNMP data ,flaky for some older Catalyst versions. device: wsc5500,wsc5505,wsc5509 device: wsx5302 arpnip: yes class: Layer3 note: Router blade that runs IOS device-family: Catalyst 6500 macsuck:vlan duplex: write vlan: write class: Layer3::C6500 note: Runs in two possible modes, native (IOS) and hybrid (IOS with CatOS on top). note: Switch running Hybrid has WS-C in description field and loves L2::Catalyst class note: Native Mode (IOS) versions seem to have SNMP problems with L2 data. note: !Problem with IOS 12.2.17d-SXB ... upgrade to -SXB1 or higher. note: !Sup720-3B and NativeIOS 12.2 (17d)SXB10 may report 127.0.0.51 as CDP neighbor address. device: 6503 macsuck:no note: !Macsuck failing even under vlan mode note: Native mode (IOS) reports L2+L3 device: 6509 duplex: link macsuck:no note: Native mode (IOS) reports L2+L3 note: !Macsuck failing even under vlan mode device: wsc6509 duplex: write class: Layer2::Catalyst note: Hybrid Mode (Catalyst) reports L2 only device: 6kMsfc class: Layer3 duplex: no vlan: no note: IOS portion of Hybrid mode. VLAN and other L3 Services. device: 6kMsfc2 class: Layer3 duplex: no vlan: no note: IOS portion of Hybrid mode. VLAN and other L3 Services. device-family: Voice Gateway class: Layer3 duplex: no device: VG200 device-family: Wireless Controllers class: Layer2::Airespace cdp:no arpnip: no macsuck: yes portmac: yes duplex: both note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports. note: Device will only communicate with SNMP version configured in the controller. device: 2006, 4112, 4124, 4136, 4402, 4404 # Dell device-vendor: Dell arpnip: no macsuck: yes duplex: both vlan: yes cdp: no modules: yes class: Layer3::Dell device-family: Dell PowerConnect 6000 Series arpnip: yes device: 6024F, 6224, 6248 device-family: Dell PowerConnect 5000 Series device: 5324 device-family: Dell PowerConnect 3000 Series device: 3348, 3448P, 3424, 3424P # Enterasys device-vendor: Enterasys Networks arpnip: yes macsuck: yes duplex: both vlan: yes cdp: yes modules: yes class: Layer3::Enterasys device-family: SuperStack C-Series device: C3G124-24, C3G124-48 device: C2G124-24, C2G124-48 device-family: Matrix device: Matrix N-Series DFE # Extreme device-vendor: Extreme Networks arpnip: yes macsuck: yes duplex: both vlan: yes cdp: no modules: yes class: Layer3::Extreme device-family: Alpine and Summit device: Alpine 3808 device: Summit 7i, 48si # Foundry device-vendor: Foundry Networks note: CDP --> FDP. vlan: yes modules: no device-family: FastIron class: Layer3::Foundry ver: 1 note: Support very limited device: FastIron 4802 device-family: EdgeIron ver: 2 class: Layer3::Foundry cdp: yes duplex: yes macsuck: yes device: EdgeIron 24G note: Bug where spanning tree stuff loops forever when polled by SNMP. device-family: IronWare class: Layer3::Foundry ver: 2 cdp: yes note: FDP enabled. duplex: yes macsuck: yes arpnip: yes device: FWSX424 device: ServerIronGT device: FLS624, FLS648 # HP device-vendor: HP class: Layer2::HP ver: 2 modules: yes device-family: HP ProCurve duplex: both macsuck: yes arpnip: no cdp: yes vlan: write note: CDP only available with newer ROM versions. device: 2512 ver: 1 device: 2524 ver: 1 device: 4000 note: duplex issues? device: 4104GL duplex: link device: 4108GL,8000,2626,2650,8000 note: VLAN info in Q-BRIDGE-MIB # Juniper device-vendor: Juniper arpnip: yes device-family: M-series router class: Layer3::Juniper device: M-series router device-family: NetScreen class: Layer3::Netscreen device: Netscreen # NetScreen device-vendor: NetScreen note: See Juniper # Net-SNMP device-vendor: Net-SNMP class: Layer3 ver: 2 device-family: Linux note: net-snmp 4.x agent and 5.x agent. device: Linux routers device-family: BSD device: BSD routers # NORTEL device-vendor: Nortel macsuck: yes cdp: proprietary note: CDP --> SONMP. device-family: BayStack Hub duplex: both ver: 1 modules: yes class: Layer1::Bayhub note: Uses proprietary MIBs to provide MAC to port mapping. note: !Requires Advanced or Advanced Analyzer NMM device: 102 device: System 5000 device-family: Ethernet Switch/Baystack Switch macsuck: yes duplex: both vlan: write modules: yes class: Layer2::Baystack device: 303,304 device: 350 device: 380 device: 410 device: 420,425 device: 450 note: !Some versions > 4.X in stacked configuration have SNMP timeout issues. note: Labels full duplex as 20Mbit connection. device: 460,470 device: BPS device-family: Ethernet Routing Switch/Baystack Switch arpnip: yes duplex: write vlan: write modules: yes class: Layer2::Baystack device: 3510 device: 2526,2550 device: 4524,4526,4548,4550 device: 5510,5520,5530 device-family: Business Ethernet Switch arpnip: yes duplex: write vlan: write modules: yes class: Layer2::Baystack device: 50,110,120,210,220,1010,1020 device-family: Centillion duplex: both vlan: yes class: Layer2::Centillion note: !Must be on version 4.x or 5.x (VLAN based) software. device: 5000BH device: 5005BH device: C100 device: C50 device-family: AP222x duplex: both modules: no class: Layer2::NAP222x note: !Upgrade to version 1.3 or higher. note: Sends out topology packets if enabled but does not build neighbor table. device: AP-2220, AP-2221 device-family: Alteon AD arpnip: yes duplex: both cdp: no vlan: yes modules: no class: Layer3::AlteonAD note: !Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher. device: AD2,AD3,AD4 device: 180,183,184 device-family: Multiprotocol Router/BayRS arpnip: yes portmac: yes duplex: both cdp: no vlan: yes modules: yes class: Layer3::BayRS device: AN,ARN,ASN,BLN,BCN device: 2430,5430 device-family: VPN Router/Contivity arpnip: yes macsuck: no portmac: yes duplex: no cdp: no modules: yes class: Layer3::Contivity device: 100,400,600 device: 1000,1010,1050 device: 1500,1600,1700,1740,1750 device: 2500,2600,2700 device: 4500,4600,5000 device-family: Ethernet Routing Switch/Passport/Accelar LAN arpnip: yes macsuck: yes portmac: yes duplex: write cdp: proprietary vlan: write modules: yes class: Layer3::Passport note: !8600 Code versions < 3.2 vlan based mac-suck and are unsupported. Upgrade code. note: !8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop. Upgrade code. device: 8603,8606,8610 device: 8610co device: 8106,8110 device: 1050,1100,1150,1200 device-family: Ethernet Routing Switch/Passport 1600 (Software < 2.1) arpnip: yes macsuck: yes portmac: yes duplex: both cdp: proprietary vlan: write class: Layer3::N1600 device: 1612,1624,1648 device-family: Ethernet Routing Switch/Passport 1600 (Software >= 2.1) arpnip: yes macsuck: yes portmac: yes duplex: write cdp: proprietary vlan: write class: Layer3::Passport device: 1612,1624,1648 device-family: Synoptics macsuck: yes duplex: both cdp: proprietary ver: 1 class: Layer1::S3000 note: Uses proprietary MIBs to provide MAC to port mapping. note: !Requires Advanced or Advanced Analyzer NMM device: 281X device: System 3000 device-family: Wireless Switch 2270 arpnip: no macsuck: yes portmac: yes duplex: both cdp: proprietary modules: yes class: Layer2::N2270 note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports. device: 2270 # Proxim device-vendor: Proxim macsuck: yes duplex: no cdp: no class: Layer2::Orinoco device-family: Orinoco device: AP-1000,AP-2000,AP-4000 device: WavePOINT-II # Sun device-vendor: Sun class: Layer3::Sun device-family: Sun routers device: Sun routers # Synoptics device-vendor: Synoptics note: See Nortel # Zyxel device-vendor: Zyxel class: Layer2::ZyXEL_DSLAM note: Doesn't report sysServices (layers) device-family: Zyxel DSLAM device:AAM10008-61, AAM1008-63