# SNMP::Info::Layer2::Centillion
# $Id$
#
# Copyright (c) 2008 Eric Miller
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::Layer2::Centillion;

use strict;
use Exporter;
use SNMP::Info;
use SNMP::Info::Bridge;
use SNMP::Info::NortelStack;
use SNMP::Info::SONMP;

@SNMP::Info::Layer2::Centillion::ISA
    = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::NortelStack SNMP::Info::SONMP Exporter/;
@SNMP::Info::Layer2::Centillion::EXPORT_OK = qw//;

use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;

$VERSION = '3.60';

%MIBS = (
    %SNMP::Info::MIBS,
    %SNMP::Info::Bridge::MIBS,
    %SNMP::Info::NortelStack::MIBS,
    %SNMP::Info::SONMP::MIBS,
    'CENTILLION-DOT3-EXTENSIONS-MIB' => 'cnDot3ExtnTable',
    'S5-COMMON-STATS-MIB'            => 's5CmStat',
    'CENTILLION-VLAN-MIB'            => 'cnVlanENETMgt',
    'CENTILLION-CONFIG-MIB'          => 'sysTFTPStart',
);

%GLOBALS = (
    %SNMP::Info::GLOBALS,
    %SNMP::Info::Bridge::GLOBALS,
    %SNMP::Info::NortelStack::GLOBALS,
    %SNMP::Info::SONMP::GLOBALS,
    'tftp_action' => 'sysTFTPStart',
    'tftp_host'   => 'sysTFTPIpAddress',
    'tftp_file'   => 'sysTFTPFileName',
    'tftp_type'   => 'sysTFTPFileType',
    'tftp_result' => 'sysTFTPResult',
);

%FUNCS = (
    %SNMP::Info::FUNCS,
    %SNMP::Info::Bridge::FUNCS,
    %SNMP::Info::NortelStack::FUNCS,
    %SNMP::Info::SONMP::FUNCS,

    # CENTILLION-DOT3-EXTENSIONS-MIB::cnDot3ExtnTable
    'centillion_p_index'        => 'cnDot3ExtnIfIndex',
    'centillion_p_duplex'       => 'cnDot3ExtnIfOperConnectionType',
    'centillion_p_duplex_admin' => 'cnDot3ExtnIfAdminConnectionType',

    # S5-COMMON-STATS-MIB::s5CmSNodeTable
    'fw_mac'  => 's5CmSNodeMacAddr',
    'fw_port' => 's5CmSNodeIfIndx',

    # CENTILLION-VLAN-MIB::cnVlanPortMemberTable
    'centillion_i_vlan_index' => 'cnVlanPortMemberIfIndex',
    'centillion_i_vlan'       => 'cnVlanPortMemberVID',
    'centillion_i_vlan_type'  => 'cnVlanPortMemberIngressType',
);

%MUNGE = (

    # Inherit all the built in munging
    %SNMP::Info::MUNGE,
    %SNMP::Info::Bridge::MUNGE,
    %SNMP::Info::NortelStack::MUNGE,
    %SNMP::Info::SONMP::MUNGE,
);

sub os {
    return 'centillion';
}

sub vendor {
    return 'nortel';
}

sub i_ignore {
    my $centillion = shift;
    my $descr      = $centillion->i_description();

    my %i_ignore;
    foreach my $if ( keys %$descr ) {
        my $type = $descr->{$if};

        # Skip virtual interfaces
        $i_ignore{$if}++ if $type =~ /(VE|VID|vc|lp)/i;
    }
    return \%i_ignore;
}

sub interfaces {
    my $centillion = shift;
    my $i_index    = $centillion->i_index();
    my $i_descr    = $centillion->i_description();

    my %if;
    foreach my $iid ( keys %$i_index ) {
        my $index = $i_index->{$iid};
        next unless defined $index;
        my $descr = $i_descr->{$iid};

        # Skip ATM and virtual interfaces
        next if $descr =~ /(VE|VID|vc|lp)/i;

        # Index numbers are deterministic slot * 256 + port
        my $port     = $index % 256;
        my $slot     = int( $index / 256 );
        my $slotport = "$slot.$port";

        $slotport = "$descr" if $descr =~ /(mcp)/i;

        $if{$index} = $slotport;
    }

    return \%if;
}

sub i_duplex {
    my $centillion = shift;

    my $port_index  = $centillion->centillion_p_index();
    my $port_duplex = $centillion->centillion_p_duplex();

    my %i_duplex;
    foreach my $iid ( keys %$port_index ) {
        my $index = $port_index->{$iid};
        next unless defined $index;
        my $duplex = $port_duplex->{$iid};
        next unless defined $duplex;

        $duplex = 'half' if $duplex =~ /half/i;
        $duplex = 'full' if $duplex =~ /full/i;
        $i_duplex{$index} = $duplex;
    }
    return \%i_duplex;
}

sub i_duplex_admin {
    my $centillion = shift;

    my $port_index = $centillion->centillion_p_index();
    my $port_admin = $centillion->centillion_p_duplex_admin();

    my %i_duplex_admin;
    foreach my $iid ( keys %$port_index ) {
        my $index = $port_index->{$iid};
        next unless defined $index;
        my $duplex = $port_admin->{$iid};
        next unless defined $duplex;

        $duplex = 'half' if $duplex =~ /half/i;
        $duplex = 'full' if $duplex =~ /full/i;
        $duplex = 'auto' if $duplex =~ /auto/i;
        $i_duplex_admin{$index} = $duplex;
    }
    return \%i_duplex_admin;
}

sub i_vlan {
    my $centillion = shift;

    my $cn_vlan_index = $centillion->centillion_i_vlan_index();
    my $cn_vlan       = $centillion->centillion_i_vlan();

    my %i_vlan;
    foreach my $iid ( keys %$cn_vlan_index ) {
        my $index = $cn_vlan_index->{$iid};
        next unless defined $index;
        my $vlan = $cn_vlan->{$iid};
        next unless defined $vlan;

        $i_vlan{$index} = $vlan;
    }
    return \%i_vlan;
}

sub model {
    my $centillion = shift;
    my $id         = $centillion->id();
    return unless defined $id;
    my $model = &SNMP::translateObj($id);
    return $id unless defined $model;
    $model =~ s/^sreg-//i;

    return '5000BH' if ( $model =~ /5000BH/ );
    return '5005BH' if ( $model =~ /5005BH/ );
    return 'C100'   if ( $model =~ /Centillion100/ );
    return 'C50N'   if ( $model =~ /Centillion50N/ );
    return 'C50T'   if ( $model =~ /Centillion50T/ );
    return $model;
}

sub bp_index {
    my $centillion = shift;
    my $index      = $centillion->fw_port();

    my %bp_index;
    foreach my $iid ( keys %$index ) {
        my $b_index = $index->{$iid};
        next unless defined $b_index;

        #Index value is the same as ifIndex
        $bp_index{$b_index} = $b_index;
    }

    return \%bp_index;
}

sub index_factor {
    return 256;
}

sub slot_offset {
    return 0;
}

sub fw_mac {
    my $centillion = shift;
    my $partial   = shift;

    return $centillion->SUPER::fw_mac($partial);
}

sub fw_port {
    my $centillion = shift;
    my $partial   = shift;

    return $centillion->SUPER::fw_port($partial);
}

1;
__END__

=head1 NAME

SNMP::Info::Layer2::Centillion - SNMP Interface to Nortel Centillion based
ATM Switches

=head1 AUTHOR

Eric Miller

=head1 SYNOPSIS

 # Let SNMP::Info determine the correct subclass for you. 
 my $centillion = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class      = $centillion->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

=head1 DESCRIPTION

Provides abstraction to the configuration information obtainable from a 
Centillion device through SNMP. 

For speed or debugging purposes you can call the subclass directly, but not
after determining a more specific class using the method above. 

 my $centillion = new SNMP::Info::Layer2::centillion(...);
 
Note:  This class supports version 4.X and 5.X which are VLAN based rather
than bridge group based.

=head2 Inherited Classes

=over

=item SNMP::Info

=item SNMP::Info::Bridge

=item SNMP::Info::NortelStack

=item SNMP::Info::SONMP

=back

=head2 Required MIBs

=over

=item F<CENTILLION-DOT3-EXTENSIONS-MIB>

=item F<S5-COMMON-STATS-MIB>

=item F<CENTILLION-VLAN-MIB>

=item F<CENTILLION-CONFIG-MIB>

=item Inherited Classes' MIBs

See L<SNMP::Info/"Required MIBs"> for its own MIB requirements.

See L<SNMP::Info::Bridge/"Required MIBs"> for its own MIB requirements.

See L<SNMP::Info::NortelStack/"Required MIBs"> for its own MIB requirements.

See L<SNMP::Info::SONMP/"Required MIBs"> for its own MIB requirements.

=back

=head1 GLOBALS

These are methods that return scalar value from SNMP

=over

=item $centillion->vendor()

Returns 'Nortel'

=item $centillion->model()

Cross references $centillion->id() to the F<SYNOPTICS-MIB> and returns
the results.

Removes C<sreg-> from the model name

=item $centillion->os()

Returns 'Centillion'

=item $centillion->tftp_action()

(C<sysTFTPStart>)

=item $centillion->tftp_host()

(C<sysTFTPIpAddress>)

=item $centillion->tftp_file()

(C<sysTFTPFileName>)

=item $centillion->tftp_type()

(C<sysTFTPFileType>)

=item $centillion->tftp_result()

(C<sysTFTPResult>)

=back

=head2 Overrides

=over

=item  $centillion->index_factor()

Required by SNMP::Info::SONMP.  Number representing the number of ports
reserved per slot within the device MIB.  Returns 256.

=item $centillion->slot_offset()

Required by SNMP::Info::SONMP.  Offset if slot numbering does not
start at 0.  Returns 0.

=back

=head2 Globals imported from SNMP::Info

See documentation in L<SNMP::Info/"GLOBALS"> for details.

=head2 Globals imported from SNMP::Info::Bridge

See documentation in L<SNMP::Info::Bridge/"GLOBALS"> for details.

=head2 Globals imported from SNMP::Info::NortelStack

See documentation in L<SNMP::Info::NortelStack/"GLOBALS"> for details.

=head2 Global Methods imported from SNMP::Info::SONMP

See documentation in L<SNMP::Info::SONMP/"GLOBALS"> for details.

=head1 TABLE METHODS

These are methods that return tables of information in the form of a reference
to a hash.

=head2 Overrides

=over

=item $centillion->interfaces()

    Returns reference to the map between IID and physical Port.

    Slot and port numbers on the Passport switches are determined by the
    formula:
      port = index % 256
      slot = int(index / 256)
 
    The physical port name is returned as slot.port.

=item $centillion->i_duplex()

Returns reference to map of IIDs to current link duplex

=item $centillion->i_duplex_admin()

Returns reference to hash of IIDs to admin duplex setting

=item $centillion->i_ignore()

Returns reference to hash of IIDs to ignore.

=item $centillion->fw_mac()

(C<s5CmSNodeMacAddr>)

=item $centillion->fw_port()

(C<s5CmSNodeIfIndx>)

=item $centillion->bp_index()

Returns a mapping between C<ifIndex> and the Bridge Table.

=item $centillion->i_vlan()

Returns a mapping between C<ifIndex> and the VLAN.

=back

=head2 Centillion 802.3 Extension Table (C<cnDot3ExtnTable>)

=over

=item $centillion->centillion_p_index()

Returns reference to hash.  Maps table IIDs to Interface IIDs 

(C<cnDot3ExtnIfIndex>)

=item $centillion->centillion_p_duplex()

Returns reference to hash.  Maps port operational duplexes to IIDs 

(C<cnDot3ExtnIfOperConnectionType>)

=item $centillion->rc_centillion_p_duplex_admin()

Returns reference to hash.  Maps port admin duplexes to IIDs

(C<cnDot3ExtnIfAdminConnectionType>)

=back

=head2 Centillion VLAN Table (C<cnVlanPortMemberTable>)

=over

=item $centillion->centillion_i_vlan_index()

Returns reference to hash.  Key: Table entry, Value: Index 

(C<cnVlanPortMemberIfIndex>)

=item $centillion->centillion_i_vlan()

Returns reference to hash.  Key: Table entry, Value: VLAN ID 

(C<cnVlanPortMemberVID>)

=item $centillion->centillion_i_vlan_type()

Returns reference to hash.  Key: Table entry, Value: VLAN Type 

(C<cnVlanPortMemberIngressType>)

=back

=head2 Table Methods imported from SNMP::Info

See documentation in L<SNMP::Info/"TABLE METHODS"> for details.

=head2 Table Methods imported from SNMP::Info::Bridge

See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.

=head2 Table Methods imported from SNMP::Info::NortelStack

See documentation in L<SNMP::Info::NortelStack/"TABLE METHODS"> for details.

=head2 Table Methods imported from SNMP::Info::SONMP

See documentation in L<SNMP::Info::SONMP/"TABLE METHODS"> for details.

=cut