# SNMP::Info::Layer2::HP - SNMP Interface to HP ProCurve Switches
# Max Baker
#
# Copyright (c) 2004,2005 Max Baker changes from version 0.8 and beyond.
#
# Copyright (c) 2002,2003 Regents of the University of California
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions are met:
# 
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright notice,
#       this list of conditions and the following disclaimer in the documentation
#       and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the 
#       names of its contributors may be used to endorse or promote products 
#       derived from this software without specific prior written permission.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::Layer2::HP;
$VERSION = '1.04';
# $Id$

use strict;

use Exporter;
use SNMP::Info::Layer2;
use SNMP::Info::MAU;
use SNMP::Info::Entity;
use SNMP::Info::CDP;

use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE $INIT/ ;

@SNMP::Info::Layer2::HP::ISA = qw/SNMP::Info::Layer2 SNMP::Info::MAU SNMP::Info::Entity
                                  SNMP::Info::CDP Exporter/;
@SNMP::Info::Layer2::HP::EXPORT_OK = qw//;

%MIBS = ( %SNMP::Info::Layer2::MIBS,
          %SNMP::Info::MAU::MIBS,
          %SNMP::Info::Entity::MIBS,
          %SNMP::Info::CDP::MIBS,
          'RFC1271-MIB' => 'logDescription',
          'HP-ICF-OID'  => 'hpSwitch4000',
          'HP-VLAN'     => 'hpVlanMemberIndex',
          'STATISTICS-MIB' => 'hpSwitchCpuStat',
          'NETSWITCH-MIB'  => 'hpMsgBufFree',   
        );

%GLOBALS = (
            %SNMP::Info::Layer2::GLOBALS,
            %SNMP::Info::MAU::GLOBALS,
            %SNMP::Info::Entity::GLOBALS,
            %SNMP::Info::CDP::GLOBALS,
            'serial1'      => 'entPhysicalSerialNum.1',
            'hp_cpu'       => 'hpSwitchCpuStat.0',
            'hp_mem_total' => 'hpGlobalMemTotalBytes.1',
            'mem_free'     => 'hpGlobalMemFreeBytes.1',
            'mem_used'     => 'hpGlobalMemAllocBytes.1',
            'os_version'   => 'hpSwitchOsVersion.0',
            'os_bin'       => 'hpSwitchRomVersion.0',
            'mac'          => 'hpSwitchBaseMACAddress.0',
            'hp_vlans'     => 'hpVlanNumber',
           );

%FUNCS   = (
            %SNMP::Info::Layer2::FUNCS,
            %SNMP::Info::MAU::FUNCS,
            %SNMP::Info::Entity::FUNCS,
            %SNMP::Info::CDP::FUNCS,
            'bp_index2' => 'dot1dBasePortIfIndex',
            'i_type2'   => 'ifType',
            # RFC1271
            'l_descr'   => 'logDescription',
            # HP-VLAN-MIB
            'hp_v_index'   => 'hpVlanDot1QID',
            'hp_v_name'    => 'hpVlanIdentName',
            'hp_v_state'   => 'hpVlanIdentState',
            'hp_v_type'    => 'hpVlanIdentType',
            'hp_v_status'  => 'hpVlanIdentStatus',
            'hp_v_mac'     => 'hpVlanAddrPhysAddress',
            'hp_v_if_index'=> 'hpVlanMemberIndex',
            'hp_v_if_tag'  => 'hpVlanMemberTagged2',
           );

%MUNGE = (
            # Inherit all the built in munging
            %SNMP::Info::Layer2::MUNGE,
            %SNMP::Info::MAU::MUNGE,
            %SNMP::Info::Entity::MUNGE,
            %SNMP::Info::CDP::MUNGE
         );

%MODEL_MAP = ( 
                'J4093A' => '2424M',
                'J4110A' => '8000M',
                'J4120A' => '1600M',
                'J4121A' => '4000M',
                'J4122A' => '2400M',
                'J4138A' => '9308M',
                'J4139A' => '9304M',
                'J4812A' => '2512',
                'J4813A' => '2524',
                'J4815A' => '3324XL',
                'J4819A' => '5308XL',
                'J4840A' => '6308M-SX',
                'J4841A' => '6208M-SX',
                'J4850A' => '5304XL',
                'J4851A' => '3124',
                'J4865A' => '4108GL',
                'J4874A' => '9315M',
                'J4887A' => '4104GL',
                'J4899A' => '2650',
                'J4899B' => '2650-CR',
                'J4900A' => '2626',
                'J4900B' => '2626-CR',
                'J4902A' => '6108',
                'J4903A' => '2824',
                'J4904A' => '2848',
                'J4905A' => '3400cl-24G',
                'J4906A' => '3400cl-48G',
                'J8130A' => 'WAP-420-NA',
                'J8131A' => 'WAP-420-WW',
                'J8133A' => 'AP520WL',
                'J8164A' => '2626-PWR',
                'J8165A' => '2650-PWR',
                'J8433A' => 'CX4-6400cl-6XG',
                'J8474A' => 'MF-6400cl-6XG',
                'J8718A' => '5404yl',
                'J8719A' => '5408yl',
           );

# Method Overrides

*SNMP::Info::Layer2::HP::i_duplex       = \&SNMP::Info::MAU::mau_i_duplex;
*SNMP::Info::Layer2::HP::i_duplex_admin = \&SNMP::Info::MAU::mau_i_duplex_admin;

sub cpu {
    my $hp = shift;
    return $hp->hp_cpu();
}

sub mem_total {
    my $hp = shift;
    return $hp->hp_mem_total();
}

sub os {
    return 'hp';
}
sub os_ver {
    my $hp = shift;
    my $os_version = $hp->os_version();
    return $os_version if defined $os_version;
    # Some older ones don't have this value,so we cull it from the description
    my $descr = $hp->description();
    if ($descr =~ m/revision ([A-Z]{1}\.\d{2}\.\d{2})/) {
        return $1;
    }
    return undef;
}

# Lookup model number, and translate the part number to the common number
sub model {
    my $hp = shift;
    my $id = $hp->id();
    return undef unless defined $id;
    my $model = &SNMP::translateObj($id);
    return $id unless defined $model;
    
    $model =~ s/^hpswitch//i;

    return defined $MODEL_MAP{$model} ? $MODEL_MAP{$model} : $model;
}

# Some have the serial num in entity mib, some dont.
sub serial {
    my $hp = shift;
    
    # procurve 2xxx have this
    my $serial = $hp->serial1();

    return undef unless defined $serial;
    # 4xxx dont
    return undef if $serial =~ /nosuchobject/i;

    return $serial; 
}

sub interfaces {
    my $hp = shift;
    my $interfaces = $hp->i_index();
    my $i_descr    = $hp->i_description(); 

    my %if;
    foreach my $iid (keys %$interfaces){
        my $descr = $i_descr->{$iid};
        next unless defined $descr;
        $if{$iid} = $descr if (defined $descr and length $descr);
    }

    return \%if

}

sub i_type {
    my $hp = shift;
    my $e_descr = $hp->e_descr();
    my $e_port = $hp->e_port();

    # Grab default values to pass through
    my $i_type = $hp->i_type2();

    # Now Stuff in the entity-table values
    foreach my $port (keys %$e_descr){
        my $iid = $e_port->{$port};
        next unless defined $iid;
        my $type = $e_descr->{$port};
        $type =~ s/^HP ?//;
        $i_type->{$iid} = $type;
    }
    
    return $i_type;

}

sub i_name {
    my $hp = shift;
    my $i_alias    = $hp->i_alias();
    my $e_name     = $hp->e_name();
    my $e_port     = $hp->e_port();

    my %i_name;

    foreach my $port (keys %$e_name){
        my $iid = $e_port->{$port};
        next unless defined $iid;
        my $alias = $i_alias->{$iid};
        next unless defined $iid;
        $i_name{$iid} = $e_name->{$port};

        # Check for alias
        $i_name{$iid} = $alias if (defined $alias and length($alias));
    }
    
    return \%i_name;
}

sub vendor {
    return 'hp';
}

sub log {
    my $hp=shift;

    my $log = $hp->l_descr();

    my $logstring = undef;

    foreach my $val (values %$log){
        next if $val =~ /^Link\s+(Up|Down)/;
        $logstring .= "$val\n"; 
    }

    return $logstring; 
}

sub slots {
    my $hp=shift;
    
    my $e_name = $hp->e_name();

    return undef unless defined $e_name;

    my $slots;
    foreach my $slot (keys %$e_name) {
        $slots++ if $e_name->{$slot} =~ /slot/i;
    }

    return $slots;
}

#sub fan {
#    my $hp = shift;
#
#    my %ents = reverse %{$hp->e_name()};
#
#    my $fan = $ents{'Fan'};
#
#}

sub i_vlan {
    my $hp = shift;

    # Newer devices use Q-BRIDGE-MIB
    my $qb_i_vlan = $hp->qb_i_vlan_t();
    if (defined $qb_i_vlan and scalar(keys %$qb_i_vlan)){
        return $qb_i_vlan;
    }

    # HP4000 ... get it from HP-VLAN
    # the hpvlanmembertagged2 table has an entry in the form of 
    #   vlan.interface = /untagged/no/tagged/auto
    my $i_vlan      = {};
    my $hp_v_index  = $hp->hp_v_index();
    my $hp_v_if_tag = $hp->hp_v_if_tag();
    foreach my $row (keys %$hp_v_if_tag){
        my ($index,$if) = split(/\./,$row);

        my $tag = $hp_v_if_tag->{$row};
        my $vlan = $hp_v_index->{$index};
        
        next unless defined $tag;
        $vlan = 'Trunk' if $tag eq 'tagged';
        $vlan = 'Auto'  if $tag eq 'auto';
        undef $vlan if $tag eq 'no';

        
        $i_vlan->{$if} = $vlan if defined $vlan;
    }

    return $i_vlan;
}

# Bridge MIB does not map Bridge Port to ifIndex correctly on all models
sub bp_index {
    my $hp = shift;
    my $if_index = $hp->i_index();
    my $model = $hp->model();
    my $bp_index = $hp->bp_index2();
    
    unless (defined $model and $model =~ /(1600|2424|4000|8000)/) {
        return $bp_index;
    }

    my %mod_bp_index;
    foreach my $iid (keys %$if_index){
        $mod_bp_index{$iid} = $iid;
    }
    return \%mod_bp_index;
}

1;
__END__

=head1 NAME

SNMP::Info::Layer2::HP - SNMP Interface to HP Procurve Switches

=head1 AUTHOR

Max Baker

=head1 SYNOPSIS

 # Let SNMP::Info determine the correct subclass for you. 
 my $hp = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          # These arguments are passed directly on to SNMP::Session
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class      = $hp->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

=head1 DESCRIPTION

Provides abstraction to the configuration information obtainable from a 
HP ProCurve Switch via SNMP. 

Note:  Some HP Switches will connect via SNMP version 1, but a lot of config data will 
not be available.  Make sure you try and connect with Version 2 first, and then fail back
to version 1.

For speed or debugging purposes you can call the subclass directly, but not after determining
a more specific class using the method above. 

 my $hp = new SNMP::Info::Layer2::HP(...);

=head2 Inherited Classes

=over

=item SNMP::Info::Layer2

=item SNMP::Info::Entity

=item SNMP::Info::MAU

=back

=head2 Required MIBs

=over

=item RFC1271-MIB

Included in V2 mibs from Cisco

=item HP-ICF-OID

=item HP-VLAN

(this MIB new with SNMP::Info 0.8)

=item STATISTICS-MIB

=item NETSWITCH-MIB

=back

The last three MIBs listed are from HP and can be found at L<http://www.hp.com/rnd/software>
or L<http://www.hp.com/rnd/software/MIBs.htm>

=head1 ChangeLog

Version 0.4 - Removed ENTITY-MIB e_*() methods to separate sub-class - SNMP::Info::Entity

=head1 GLOBALS

These are methods that return scalar value from SNMP

=over

=item $hp->cpu()

Returns CPU Utilization in percentage.

=item $hp->log()

Returns all the log entries from the switch's log that are not Link up or down messages.

=item $hp->mem_free()

Returns bytes of free memory

=item $hp->mem_total()

Return bytes of total memory

=item $hp->mem_used()

Returns bytes of used memory

=item $hp->model()

Returns the model number of the HP Switch.  Will translate between the HP Part number and 
the common model number with this map :

 %MODEL_MAP = ( 
                'J4093A' => '2424M',
                'J4110A' => '8000M',
                'J4120A' => '1600M',
                'J4121A' => '4000M',
                'J4122A' => '2400M',
                'J4138A' => '9308M',
                'J4139A' => '9304M',
                'J4812A' => '2512',
                'J4813A' => '2524',
                'J4815A' => '3324XL',
                'J4819A' => '5308XL',
                'J4840A' => '6308M-SX',
                'J4841A' => '6208M-SX',
                'J4850A' => '5304XL',
                'J4851A' => '3124',
                'J4865A' => '4108GL',
                'J4874A' => '9315M',
                'J4887A' => '4104GL',
                'J4899A' => '2650',
                'J4899B' => '2650-CR',
                'J4900A' => '2626',
                'J4900B' => '2626-CR',
                'J4902A' => '6108',
                'J4903A' => '2824',
                'J4904A' => '2848',
                'J4905A' => '3400cl-24G',
                'J4906A' => '3400cl-48G',
                'J8130A' => 'WAP-420-NA',
                'J8131A' => 'WAP-420-WW',
                'J8133A' => 'AP520WL',
                'J8164A' => '2626-PWR',
                'J8165A' => '2650-PWR',
                'J8433A' => 'CX4-6400cl-6XG',
                'J8474A' => 'MF-6400cl-6XG',
                'J8718A' => '5404yl',
                'J8719A' => '5408yl',

              );

=item $hp->os()

Returns hp

=item $hp->os_bin()

B<hpSwitchRomVersion.0>

=item $hp->os_ver()

Tries to use os_version() and if that fails will try and cull the version from
the description field.

=item $hp->os_version()

B<hpSwitchOsVersion.0>

=item $hp->serial()

Returns serial number if available through SNMP

=item $hp->slots()

Returns number of entries in $hp->e_name that have 'slot' in them.

=item $hp->vendor()

hp

=back

=head2 Globals imported from SNMP::Info::Layer2

See documentation in SNMP::Info::Layer2 for details.

=head2 Globals imported from SNMP::Info::Entity

See documentation in SNMP::Info::Entity for details.

=head2 Globals imported from SNMP::Info::MAU

See documentation in SNMP::Info::MAU for details.

=head1 TABLE METHODS

These are methods that return tables of information in the form of a reference
to a hash.

=head2 Overrides

=over

=item $hp->interfaces() 

Uses $hp->i_description()

=item $hp->i_duplex()

Maps $hp->mau_index() with $hp->mau_link().  Methods inherited from
SNMP::Info::MAU.

=item $hp->i_duplex_admin()

Maps $hp->mau_index() with $hp->mau_auto(), $hp->mau_autostat(),
$hp->typeadmin(), and $mau_autosent().  Methods inherited from
SNMP::Info::MAU.

=item $hp->i_name()

Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()

=item $hp->i_type()

Crosses i_type() with $hp->e_descr() using $hp->e_port()

=item $hp->i_vlan()

Looks in Q-BRIDGE-MIB -- see SNMP::Info::Bridge

and for older devices looks in HP-VLAN.

=item $hp->bp_index()

Returns reference to hash of bridge port table entries map back to interface identifier (iid)

Returns (B<ifIndex>) for both key and value for 1600, 2424, 4000, and 8000 models
since they seem to have problems with BRIDGE-MIB

=back

=head2 Table Methods imported from SNMP::Info::Layer2

See documentation in SNMP::Info::Layer2 for details.

=head2 Table Methods imported from SNMP::Info::Entity

See documentation in SNMP::Info::Entity for details.

=head2 Table Methods imported from SNMP::Info::MAU

See documentation in SNMP::Info::MAU for details.

=cut