8506638e5c
Aruba controllers can act as L3 devices and provide L3 information through the standard MIBs. This change makes Aruba devices get recognized as such. Layer2.pm and Layer3.pm provide roughly the same functionality so there should be little to no impact for Aruba devices only acting as L2 entities.
866 lines
15 KiB
Plaintext
866 lines
15 KiB
Plaintext
# SNMP Device Compatibility Matrix
|
|
# SNMP::Info - (C) 2004 Max Baker
|
|
|
|
# This file is meant to detail the cababilities
|
|
# of network devices to supply data via SNMP.
|
|
|
|
# $Id$
|
|
|
|
#
|
|
# Airespace (pre-Cisco)
|
|
#
|
|
device-vendor: Airespace
|
|
cdp:no
|
|
arpnip: no
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: both
|
|
vlan: yes
|
|
modules: yes
|
|
class: Layer2::Airespace
|
|
|
|
device-family: Airespace Wireless Controllers
|
|
note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
|
|
note: Device will only communicate with SNMP version configured in the controller.
|
|
|
|
device: 3500, 4101, 4102
|
|
|
|
#
|
|
# Alcatel-Lucent
|
|
#
|
|
device-vendor: Alcatel-Lucent
|
|
|
|
device-family: L3
|
|
class: Layer3::AlcatelLucent
|
|
device: All
|
|
|
|
device-family: Timetra
|
|
class: Layer3::Timetra
|
|
device: All
|
|
|
|
device-family: AOS
|
|
class: Layer3::Aruba
|
|
device: All
|
|
|
|
#
|
|
# Allied
|
|
#
|
|
device-vendor: Allied Telesyn
|
|
cdp:no
|
|
class: Layer1::Allied
|
|
ver: 1
|
|
arpnip: no
|
|
macsuck: no
|
|
duplex: no
|
|
|
|
device-family: Allied Hubs
|
|
|
|
device: AT-3624T
|
|
|
|
device-family: AT-8000 Switches
|
|
class: Layer2::Allied
|
|
ver: 2
|
|
macsuck: yes
|
|
device: All
|
|
|
|
#
|
|
# Altiga
|
|
#
|
|
device-vendor: Altiga
|
|
class: Layer3::Altiga
|
|
note: See Cisco/Altiga
|
|
|
|
#
|
|
# Arista
|
|
#
|
|
device-vendor: Arista
|
|
class: Layer3::Arista
|
|
device-family: All
|
|
device: All
|
|
|
|
#
|
|
# Aruba
|
|
#
|
|
device-vendor: Aruba
|
|
arpnip: yes
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: no
|
|
class: Layer3::Aruba
|
|
|
|
device-family: Aruba Wireless Controllers
|
|
note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
|
|
|
|
device: 5000
|
|
|
|
device: 6000
|
|
|
|
#
|
|
# Asante
|
|
#
|
|
device-vendor: Asante
|
|
class: Layer1::Asante
|
|
ver: 1
|
|
arpnip: no
|
|
macsuck: no
|
|
duplex: no
|
|
|
|
device-family: Asante Hubs
|
|
|
|
device: 1012
|
|
|
|
#
|
|
# Bay
|
|
#
|
|
device-vendor: Bay
|
|
note: See Nortel
|
|
|
|
#
|
|
# CISCO
|
|
#
|
|
device-vendor: Cisco
|
|
cdp: yes
|
|
ver: 2
|
|
modules: yes
|
|
|
|
device-family: Aironet
|
|
note: IOS and Aironet OS versions
|
|
class: Layer3::Aironet
|
|
|
|
device: AIRAP1100, AP1200, C1100, C1130, C1240
|
|
note: IOS based device
|
|
class: Layer2::Aironet
|
|
|
|
device: BR500
|
|
note: Aironet based device
|
|
|
|
device: AP350, AP340, CAP350, CAP340, 1200, AP4800
|
|
note: Aironet based device
|
|
|
|
device-family: Altiga
|
|
class: Layer3::Altiga
|
|
|
|
device: VPN3000
|
|
note: The Cisco 3000 device can return duplicate interface names, while Netdisco expects unique interface names. To ensure unique device names I append numbers only when an interface name would not be unique without one. Interfaces with unique names keep their ifDescr name.
|
|
|
|
device-family: 1000
|
|
duplex: no
|
|
ver: 1
|
|
class: Layer3::Cisco
|
|
|
|
device: 1003
|
|
|
|
device-family: 1700
|
|
class: Layer3::Cisco
|
|
|
|
device: 1710
|
|
duplex: link
|
|
|
|
device-family: 2500
|
|
duplex: no
|
|
macsuck: yes
|
|
arpnip: yes
|
|
ver: 1
|
|
class: Layer3::Cisco
|
|
|
|
device: 2501,2503,2511,2514
|
|
|
|
device: AS2509RJ,AS2511RJ
|
|
|
|
device-family: 2600
|
|
duplex: link
|
|
arpnip: yes
|
|
macsuck: yes
|
|
class: Layer3::Cisco
|
|
|
|
device:2610, 2610XM, 2611, 2620, 2620XM, 2621, 2621XM, 2651XM, 2691
|
|
|
|
device-family: 2800
|
|
duplex: link
|
|
arpnip: yes
|
|
macsuck: yes
|
|
class: Layer3::Cisco
|
|
|
|
device: 2811,2821,2851
|
|
|
|
device-family: 3600
|
|
class: Layer3::Cisco
|
|
|
|
device: 3620
|
|
|
|
device: 3640
|
|
duplex: no
|
|
|
|
device-family:7200
|
|
class: Layer3::Cisco
|
|
device:all
|
|
#note: Unconfirmed problem : "When scanning my network with netdisco I would find that my 7200 series router running Cisco IOS Software Release 12.2(1) would reboot when scanning for CDP neighbours, to solve the issue I upgraded to Cisco IOS Software Release Version 12.2(37)"
|
|
|
|
device-family: 7500
|
|
class: Layer3::Cisco
|
|
|
|
device: 7507
|
|
duplex: no
|
|
note: !Duplex settings are falsely reported in ancient IOS versions
|
|
|
|
device-family: AS5000
|
|
duplex: no
|
|
class: Layer3::Cisco
|
|
|
|
device: AS5300
|
|
|
|
#
|
|
# Cisco - Catalyst
|
|
#
|
|
device-family: Catalyst 1900
|
|
note: !Upgrade older (pre 9.0) versions of CatOS
|
|
note: !CatOS ver 9.00.03 through 9.00.06 have problems when trunking. Upgrade to 9.00.07 or higher.
|
|
ver: 1
|
|
duplex: both
|
|
vlan: write
|
|
class: Layer2::C1900
|
|
|
|
device: wsc1900c, wsc1900
|
|
|
|
device-family: Catalyst 2900
|
|
note: IOS
|
|
macsuck: vlan
|
|
duplex: write
|
|
vlan: write
|
|
class: Layer2::C2900
|
|
portmac: yes
|
|
note: !Pre IOS 11.2 (8) SA3 - PortMAC shows up in CAM table.
|
|
|
|
device: 2912MfXL, 2924CXL, 2924CXLv
|
|
|
|
device: 2908xl
|
|
note: !Pre IOS 11.2 (8.6) some features (duplex...) aren't present.
|
|
|
|
device: 2924MXL
|
|
ver: 1
|
|
|
|
device-family: Catalyst 2940
|
|
note: IOS
|
|
macsuck: vlan
|
|
duplex: write
|
|
vlan: write
|
|
class: Layer2::C2900
|
|
portmac: yes
|
|
|
|
device: 2940-8TT
|
|
|
|
device-family: Catalyst 2950
|
|
note: IOS
|
|
macsuck: vlan
|
|
duplex: write
|
|
vlan: write
|
|
class: Layer2::C2900
|
|
portmac: yes
|
|
|
|
device: 2950-t24
|
|
|
|
device-family: Catalyst 2970
|
|
macsuck:vlan
|
|
duplex: write
|
|
vlan: write
|
|
note: Acts just like IOS Catalyst 6500 series
|
|
class: Layer3::C6500
|
|
|
|
device: 2960, 2970G-24T-E
|
|
|
|
device-family: Catalyst 3500 XL
|
|
portmac: yes
|
|
macsuck: vlan
|
|
duplex: write
|
|
vlan: write
|
|
note: L2 only IOS devices - Just like Catalyst 2900 series from SNMP
|
|
note: IOS Version 12.0(5)XP is buggy and doesn't do VLAN Community indexing correctly.
|
|
class: Layer2::C2900
|
|
|
|
device: 3508GXL, 3524XL, 3548XL
|
|
|
|
device-family: Catalyst 3550
|
|
macsuck: vlan
|
|
duplex: write
|
|
vlan: write
|
|
class: Layer3::C3550
|
|
note: Run IOS
|
|
note: Has VLANs that don't accept SNMP connections. Don't know if they are standard (by name or number).
|
|
note: Uses CISCO-STACK-MIB like Catalyst 5000 series for serial,duplex,type but not name
|
|
note: Comes in flavors that support L2, L3 or combo.
|
|
|
|
device: 3550-12T
|
|
|
|
device: 3400 w/ MetroBase Image
|
|
|
|
device: 3550, 3560, 3550-24, 3550-48
|
|
note: L2/L3 Switch
|
|
arpnip: yes
|
|
macsuck: vlan
|
|
|
|
device-family: Catalyst 3750
|
|
class: Layer3::C6500
|
|
|
|
device: 3750
|
|
|
|
device-family: Catalyst Blade Switch 3xxx
|
|
macsuck: vlan
|
|
class: Layer3::C6500
|
|
note: Cisco Blade switches for Dell, FSC, HP and IBM blade system chassis. Limited testing done.
|
|
|
|
device-family: Catalyst 4000
|
|
duplex: write
|
|
macsuck: vlan
|
|
vlan: write
|
|
class: Layer2::Catalyst
|
|
note: Comes in IOS and CatOS versions like the 6k series.
|
|
note: !Reported problems with SNMP taking up all the CPU on older SW. Requests take significantly longer.
|
|
note: !IOS Version 12.1.8a reported not to respond to BRIDGE-MIB calls.
|
|
|
|
device: wsc4003, wsc4006, wsc4503, wsc4506
|
|
|
|
device: wsc4912g
|
|
note: Dedicated 12 port gig-e switch
|
|
|
|
device: 4006
|
|
duplex: both
|
|
class: Layer3::C4000
|
|
note: !Has serious slowdown/timeout problems with SNMP
|
|
note: !IOS Software Release 12.2(20)EW or higher required for duplex support
|
|
|
|
device: 4503, 4506, 4507, 4510
|
|
duplex: both
|
|
class: Layer3::C4000
|
|
note: !Has serious slowdown/timeout problems with SNMP
|
|
note: !IOS Software Release 12.2(20)EW or higher required for duplex support
|
|
|
|
device-family: Catalyst 5000
|
|
duplex: write
|
|
vlan: write
|
|
class: Layer2::Catalyst
|
|
|
|
device: wsc2926
|
|
note: !Can give false information over SNMP at times.
|
|
|
|
device: wsc2948g, wsc2980g, wsc5500, wsc5505, wsc5509
|
|
|
|
device: wsc5000
|
|
note: !Has nasty tendency to not give you all SNMP data ,flaky for some older Catalyst versions.
|
|
|
|
device: wsx5302
|
|
arpnip: yes
|
|
class: Layer3
|
|
note: Router blade that runs IOS
|
|
|
|
device-family: Catalyst 6500
|
|
macsuck:vlan
|
|
duplex: write
|
|
vlan: write
|
|
class: Layer3::C6500
|
|
note: Runs in two possible modes, native (IOS) and hybrid (IOS with CatOS on top).
|
|
note: Switch running Hybrid has WS-C in description field and loves L2::Catalyst class
|
|
note: Native Mode (IOS) versions seem to have SNMP problems with L2 data.
|
|
note: !Problem with IOS 12.2.17d-SXB ... upgrade to -SXB1 or higher.
|
|
note: !Sup720-3B and NativeIOS 12.2 (17d)SXB10 may report 127.0.0.51 as CDP neighbor address.
|
|
|
|
device: 6503, 6509, sp72033, s3223, s32p3, s222
|
|
note: Native mode (IOS) reports L2+L3
|
|
|
|
device: wsc6509
|
|
duplex: write
|
|
class: Layer2::Catalyst
|
|
note: Hybrid Mode (Catalyst) reports L2 only
|
|
|
|
device: 6kMsfc
|
|
class: Layer3
|
|
duplex: no
|
|
vlan: no
|
|
note: IOS portion of Hybrid mode. VLAN and other L3 Services.
|
|
|
|
device: 6kMsfc2
|
|
class: Layer3
|
|
duplex: no
|
|
vlan: no
|
|
note: IOS portion of Hybrid mode. VLAN and other L3 Services.
|
|
|
|
device-family: Voice Gateway
|
|
class: Layer3
|
|
duplex: no
|
|
|
|
device: VG200
|
|
|
|
device-family: Wireless Controllers
|
|
class: Layer2::Airespace
|
|
cdp:no
|
|
arpnip: no
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: both
|
|
note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
|
|
note: Device will only communicate with SNMP version configured in the controller.
|
|
|
|
device: 2006, 4112, 4124, 4136, 4402, 4404
|
|
|
|
device-family: Firewall
|
|
class: Layer3::Cisco
|
|
device: PIX Security Appliance
|
|
device: Adaptive Security Applicance
|
|
|
|
device: Firewall Services Modules (FWSM)
|
|
note: !Arpnip only available for 4.x software releases.
|
|
class: Layer3::CiscoFWSM
|
|
arpnip: yes
|
|
|
|
#
|
|
# Cyclades
|
|
#
|
|
device-vendor: Cyclades
|
|
class: Layer1::Cyclades
|
|
device-family: All
|
|
device: All
|
|
|
|
#
|
|
# Dell
|
|
#
|
|
device-vendor: Dell
|
|
arpnip: no
|
|
macsuck: yes
|
|
duplex: both
|
|
vlan: yes
|
|
cdp: no
|
|
modules: yes
|
|
class: Layer3::Dell
|
|
|
|
device-family: Dell PowerConnect 6000 Series
|
|
arpnip: yes
|
|
device: 6024F, 6224, 6248
|
|
|
|
device-family: Dell PowerConnect 5000 Series
|
|
device: 5324
|
|
|
|
device-family: Dell PowerConnect 3000 Series
|
|
device: 3348, 3448P, 3424, 3424P
|
|
|
|
device-family: IBM BladeCenter Ethernet Switch
|
|
device: All
|
|
|
|
device-family: Linksys 2048
|
|
device: All
|
|
|
|
#
|
|
# Enterasys
|
|
#
|
|
device-vendor: Enterasys Networks
|
|
arpnip: yes
|
|
macsuck: yes
|
|
duplex: both
|
|
vlan: yes
|
|
cdp: yes
|
|
modules: yes
|
|
class: Layer3::Enterasys
|
|
|
|
device-family: SuperStack C-Series
|
|
|
|
device: C3G124-24, C3G124-48, C2G124-24, C2G124-48
|
|
|
|
device-family: Matrix
|
|
|
|
device: Matrix N-Series DFE
|
|
|
|
#
|
|
# Extreme
|
|
#
|
|
device-vendor: Extreme Networks
|
|
arpnip: yes
|
|
macsuck: yes
|
|
duplex: both
|
|
vlan: yes
|
|
cdp: no
|
|
modules: yes
|
|
class: Layer3::Extreme
|
|
|
|
device-family: Alpine and Summit
|
|
|
|
device: Alpine 3808
|
|
device: Summit 7i, 48si
|
|
|
|
#
|
|
# FreeBSD
|
|
#
|
|
device-vendor: FreeBSD
|
|
device-famly: Pf
|
|
class: Layer3::Pf
|
|
arpnip: yes
|
|
cdp: no
|
|
note: LLDP support might be available. See note in Layer3::Pf
|
|
|
|
#
|
|
# Foundry
|
|
#
|
|
device-vendor: Foundry Networks
|
|
vlan: yes
|
|
modules: no
|
|
|
|
device-family: FastIron
|
|
class: Layer3::Foundry
|
|
ver: 1
|
|
note: Support very limited
|
|
|
|
device: FastIron 4802
|
|
|
|
device-family: EdgeIron
|
|
ver: 2
|
|
class: Layer3::Foundry
|
|
cdp: yes
|
|
duplex: yes
|
|
macsuck: yes
|
|
device: EdgeIron 24G
|
|
note: Bug where spanning tree stuff loops forever when polled by SNMP.
|
|
|
|
device-family: IronWare
|
|
class: Layer3::Foundry
|
|
ver: 2
|
|
cdp: yes
|
|
note: FDP enabled.
|
|
duplex: yes
|
|
macsuck: yes
|
|
arpnip: yes
|
|
device: FWSX424
|
|
device: ServerIronGT
|
|
device: FLS624, FLS648
|
|
|
|
#
|
|
# HP
|
|
#
|
|
device-vendor: HP
|
|
note: HP Devices are very widely supported.
|
|
ver: 2
|
|
modules: yes
|
|
|
|
device-family: HP ProCurve (old)
|
|
class: Layer2::HP4000
|
|
duplex: both
|
|
macsuck: yes
|
|
arpnip: no
|
|
cdp: yes
|
|
vlan: write
|
|
note: devices in this class only have CDP support
|
|
note: VLAN info in HP-VLAN MIB
|
|
|
|
device: 1600M,2400,2424M,4000,8000
|
|
duplex: link
|
|
note: duplex issues?
|
|
|
|
device-family: HP ProCurve (recent)
|
|
class: Layer2::HP
|
|
duplex: both
|
|
macsuck: yes
|
|
arpnip: no
|
|
cdp: yes
|
|
vlan: write
|
|
note: old firmware versions only have CDP support, more recent have LLDP
|
|
note: VLAN info in Q-BRIDGE-MIB
|
|
|
|
device: 2312,2324,2512,2524
|
|
ver: 1
|
|
|
|
device: 2510,2600,2610,2800,2810,2900,2910al
|
|
device: 3124,3324XL,3400cl,3500,3500yl
|
|
device: 4100GL,4200vl,5300XL,5400yy,5400zl
|
|
device: 6108,6200yl,6400cl,6410cl,6600,6600ml,8200zl
|
|
|
|
|
|
#
|
|
# Juniper
|
|
#
|
|
device-vendor: Juniper
|
|
arpnip: yes
|
|
|
|
device-family: M-series router
|
|
class: Layer3::Juniper
|
|
device: All
|
|
|
|
device-family: NetScreen
|
|
class: Layer3::Netscreen
|
|
device: All
|
|
|
|
#
|
|
# Linksys
|
|
#
|
|
device-vendor: Linksys
|
|
device-family: Generic L2 Device
|
|
class: Layer2
|
|
device: Some
|
|
|
|
device-family: Generic L3 Device
|
|
class: Layer3
|
|
device: Some
|
|
|
|
device-family: 2048
|
|
class: Layer3::Dell
|
|
device: All
|
|
|
|
|
|
#
|
|
# Microsoft
|
|
#
|
|
device-vendor: Microsoft
|
|
device-family: Windows
|
|
class: Layer3::Microsoft
|
|
device: Windows Router
|
|
|
|
#
|
|
# Netgear
|
|
#
|
|
device-vendor: NetGear
|
|
device-family: Switches
|
|
class: Layer2::Netgear
|
|
device: All
|
|
|
|
#
|
|
# NetScreen
|
|
#
|
|
device-vendor: NetScreen
|
|
note: See Juniper
|
|
|
|
#
|
|
# Net-SNMP
|
|
#
|
|
device-vendor: Net-SNMP
|
|
class: Layer3
|
|
ver: 2
|
|
|
|
device-family: Linux
|
|
note: net-snmp 4.x agent and 5.x agent.
|
|
device: Linux routers
|
|
|
|
device-family: BSD
|
|
device: BSD routers
|
|
|
|
#
|
|
# NORTEL
|
|
#
|
|
device-vendor: Nortel
|
|
macsuck: yes
|
|
cdp: proprietary
|
|
note: SONMP Discovery Protocol Supported
|
|
|
|
device-family: BayStack Hub
|
|
duplex: both
|
|
ver: 1
|
|
modules: yes
|
|
class: Layer1::Bayhub
|
|
note: Uses proprietary MIBs to provide MAC to port mapping.
|
|
note: !Requires Advanced or Advanced Analyzer NMM
|
|
|
|
device: 102
|
|
|
|
device: System 5000
|
|
|
|
device-family: Ethernet Switch/Baystack Switch
|
|
macsuck: yes
|
|
duplex: both
|
|
vlan: write
|
|
modules: yes
|
|
class: Layer2::Baystack
|
|
|
|
device: 303, 304, 350, 380, 410, 420, 425, 460, 470
|
|
|
|
device: 450
|
|
note: !Some versions > 4.X in stacked configuration have SNMP timeout issues.
|
|
note: Labels full duplex as 20Mbit connection.
|
|
|
|
device: Business Policy Switch (BPS)
|
|
|
|
device-family: Ethernet Routing Switch/Baystack Switch
|
|
arpnip: yes
|
|
duplex: write
|
|
vlan: write
|
|
modules: yes
|
|
class: Layer2::Baystack
|
|
|
|
device: 3510
|
|
|
|
device: 2526,2550
|
|
|
|
device: 4524,4526,4548,4550
|
|
|
|
device: 5510,5520,5530
|
|
|
|
device-family: Business Ethernet Switch
|
|
arpnip: yes
|
|
duplex: write
|
|
vlan: write
|
|
modules: yes
|
|
class: Layer2::Baystack
|
|
|
|
device: 50,110,120,210,220,1010,1020
|
|
|
|
device-family: Centillion
|
|
duplex: both
|
|
vlan: yes
|
|
class: Layer2::Centillion
|
|
note: !Must be on version 4.x or 5.x (VLAN based) software.
|
|
|
|
device: 5000BH, 5005BH
|
|
device: C50,C100
|
|
|
|
device-family: AP222x
|
|
duplex: both
|
|
modules: no
|
|
class: Layer2::NAP222x
|
|
note: !Upgrade to version 1.3 or higher.
|
|
note: Sends out topology packets if enabled but does not build neighbor table.
|
|
|
|
device: AP-2220, AP-2221
|
|
|
|
device-family: Alteon AD
|
|
arpnip: yes
|
|
duplex: both
|
|
cdp: no
|
|
vlan: yes
|
|
modules: no
|
|
class: Layer3::AlteonAD
|
|
note: !Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher.
|
|
|
|
device: AD2,AD3,AD4
|
|
|
|
device: 180,183,184
|
|
|
|
device-family: Multiprotocol Router/BayRS
|
|
arpnip: yes
|
|
portmac: yes
|
|
duplex: both
|
|
cdp: no
|
|
vlan: yes
|
|
modules: yes
|
|
class: Layer3::BayRS
|
|
|
|
device: AN,ARN,ASN,BLN,BCN
|
|
|
|
device: 2430,5430
|
|
|
|
device-family: VPN Router/Contivity
|
|
arpnip: yes
|
|
macsuck: no
|
|
portmac: yes
|
|
duplex: no
|
|
cdp: no
|
|
modules: yes
|
|
class: Layer3::Contivity
|
|
|
|
device: 100,400,600
|
|
|
|
device: 1000,1010,1050
|
|
|
|
device: 1500,1600,1700,1740,1750
|
|
|
|
device: 2500,2600,2700
|
|
|
|
device: 4500,4600,5000
|
|
|
|
device-family: Ethernet Routing Switch/Passport/Accelar LAN
|
|
arpnip: yes
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: write
|
|
cdp: proprietary
|
|
vlan: write
|
|
modules: yes
|
|
class: Layer3::Passport
|
|
note: !8600 Code versions < 3.2 vlan based mac-suck and are unsupported. Upgrade code.
|
|
note: !8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop. Upgrade code.
|
|
|
|
device: 8603,8606,8610, 8610co, 8106, 8110
|
|
|
|
device: 1050,1100,1150,1200
|
|
|
|
device-family: Ethernet Routing Switch/Passport 1600 (Software < 2.1)
|
|
arpnip: yes
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: both
|
|
cdp: proprietary
|
|
vlan: write
|
|
class: Layer3::N1600
|
|
|
|
device: 1612,1624,1648
|
|
|
|
device-family: Ethernet Routing Switch/Passport 1600 (Software >= 2.1)
|
|
arpnip: yes
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: write
|
|
cdp: proprietary
|
|
vlan: write
|
|
class: Layer3::Passport
|
|
|
|
device: 1612,1624,1648
|
|
|
|
device-family: Synoptics
|
|
macsuck: yes
|
|
duplex: both
|
|
cdp: proprietary
|
|
ver: 1
|
|
class: Layer1::S3000
|
|
note: Uses proprietary MIBs to provide MAC to port mapping.
|
|
note: !Requires Advanced or Advanced Analyzer NMM
|
|
|
|
device: 281X
|
|
|
|
device: System 3000
|
|
|
|
device-family: Wireless Switch 2270
|
|
arpnip: no
|
|
macsuck: yes
|
|
portmac: yes
|
|
duplex: both
|
|
cdp: proprietary
|
|
modules: yes
|
|
class: Layer2::N2270
|
|
note: Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
|
|
|
|
device: 2270
|
|
|
|
#
|
|
# Proxim
|
|
#
|
|
device-vendor: Proxim
|
|
macsuck: yes
|
|
duplex: no
|
|
cdp: no
|
|
class: Layer2::Orinoco
|
|
|
|
device-family: Orinoco
|
|
|
|
device: AP-1000,AP-2000,AP-4000
|
|
|
|
device: WavePOINT-II
|
|
|
|
#
|
|
# Sun
|
|
#
|
|
device-vendor: Sun
|
|
class: Layer3::Sun
|
|
|
|
device-family: Sun routers
|
|
|
|
device: Sun routers
|
|
|
|
#
|
|
# Synoptics
|
|
#
|
|
device-vendor: Synoptics
|
|
note: See Nortel
|
|
|
|
#
|
|
# Zyxel
|
|
#
|
|
device-vendor: Zyxel
|
|
class: Layer2::ZyXEL_DSLAM
|
|
note: Doesn't report sysServices (layers)
|
|
|
|
device-family: Zyxel DSLAM
|
|
|
|
device:AAM10008-61, AAM1008-63
|