135/snmp-info
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
712 Commits 3 Branches 123 Tags
feffa6d47eb237d315e469d9c0f8040dfaf912d5
Commit Graph

712 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Brian De Wolf
feffa6d47e Fix grep statement in L3 root_ip 
The grep statement was comparing the router_ip with the SNMP OID-looking keys
instead of the values which were just the IPs.
 2011-07-07 10:42:00 -07:00
Brian De Wolf
3bb33fa8d4 Fix syntax errors in L3 changes 
Fix some syntax errors in my improvement code for L3 so that it actually runs.
 2011-06-27 16:06:56 -07:00
Brian De Wolf
30a73c035a Prefer OSPF router ID in L3 root_ip 
The previous behavior of root_ip meant that whatever /32 hosted by the device
that got listed first would be chosen as the root_ip.  If the device only
serves one /32 this works fine, but if there are multiple /32s we could easily
pick the one that is not the intended address meant for management.

Instead, before we pick whatever /32 may exist, we now try to pick the /32 that
is also the OSPF router ID (the router ID is a 32-bit unique identifier which,
while not guaranteed, tends to be an IPv4 address unique to the device).
Otherwise we fall back to the previous method of finding the root_ip.
 2011-06-24 01:44:20 -07:00
Brian De Wolf
5c44fc0b28 Fix ordering in Info::CiscoStats POD 
The header for a section got moved away from its content.
 2011-06-23 13:57:25 -07:00
Brian De Wolf
a54b446dae Avoid Perl warnings in Info::CiscoStack 
These two points in CiscoStack use a value from a hash in a numerical
comparison without verifying they exist.  If they don't, Perl warnings get
emitted.  Instead, we check for existence first, then compare the value.
 2011-06-23 13:51:43 -07:00
Oliver Gorwits
631010ed3f prep for 2.05 CPAN release ver_2_0_5 2011-06-23 21:12:27 +01:00
Brian De Wolf
8506638e5c Promote L2::Aruba to L3::Aruba 
Aruba controllers can act as L3 devices and provide L3 information through the
standard MIBs.  This change makes Aruba devices get recognized as such.
Layer2.pm and Layer3.pm provide roughly the same functionality so there should
be little to no impact for Aruba devices only acting as L2 entities.
 2011-06-23 12:40:36 -07:00
Brian De Wolf
c0f3a8eb2b Fix call in L2::Aironet 
A call to a function in Aironet was wrong and has been corrected.
 2011-06-22 13:35:26 -07:00
Oliver Gorwits
662d870ad7 added Oliver to the AUTHORS list 2011-04-25 07:44:03 +00:00
Jeroen van Ingen
08746d6b10 Fixed i_speed_raw not returning raw values (Alexander Hartmaier) 
(forgot to commit the updated Changelog when committing the patch to Info.pm)
 2011-03-31 15:44:56 +00:00
Oliver Gorwits
bc8c8a6061 prep for 2.04 release ver_2_0_4 2011-03-31 08:34:57 +00:00
Oliver Gorwits
d09e5de229 renamed Ipv6.pm to IPv6.pm 2011-03-31 08:24:29 +00:00
Oliver Gorwits
1df1bda641 change from Ipv6 to IPv6 everywhere 2011-03-31 08:04:52 +00:00
Jeroen van Ingen
e8612e3779 Method i_speed_raw didn't return raw values; patch by Alexander Hartmaier. 2011-03-30 12:39:00 +00:00
Carlos Vicente
a58d060310 Adding missing method for mapping v6 addresses with prefixes 2011-02-23 04:32:14 +00:00
Brian de Wolf
a77c539f38 These are actually listed as not-accessible so they shoudn't be defined. Their information has to be extracted from n2p_paddr instead. 2011-01-19 00:04:07 +00:00
Oliver Gorwits
b5107b5634 shorten abstract for Ipv6.pm 2011-01-09 20:42:41 +00:00
Oliver Gorwits
6c880bb7b3 add doc links to Info.pm for new Ipv6 and Pf modules 2011-01-09 18:55:31 +00:00
Jeroen van Ingen
9297c70d11 Added switch models 2915, 2615, 2520G and 1810G to HP class. Won't be 
correctly identified until hpicfoid mib is updated to include these models.
 2011-01-04 15:00:22 +00:00
Eric Miller
bfafdc99d9 Update port indexing for newer code and switches (5698) 2010-11-23 13:50:16 +00:00
Eric Miller
ab111a8e93 Modify detection for newer code levels 2010-11-17 23:18:39 +00:00
Eric Miller
c2ce3d81e1 Improve os detection for newer versions. Improve forward compatibility. 2010-11-17 23:17:04 +00:00
Carlos Vicente
fb9813af51 C2970 and C2960 were not being correctly recognized if has_layer(3) was true 2010-11-16 00:41:00 +00:00
Bill Fenner
4fb63d8a7b Implement peth_port_neg_power, reporting the actual negotiated value 
in CiscoPower and the max for the class in the generic PowerEthernet.
 2010-11-08 07:49:40 +00:00
Jeroen van Ingen
77982188bd Match for ME340x in Layer3 section, class as L3::C3550 for proper macsuck 
(ME340x requires community-based indexing)
 2010-10-29 13:03:44 +00:00
Jeroen van Ingen
8748932460 Enable IPv6 support in Layer3 base class by including Layer3::Ipv6 2010-10-21 10:29:57 +00:00
Brian de Wolf
6c88df1ac0 Fix error in FWSM support patch that caused FWSMs to not be detected. 2010-10-04 23:34:14 +00:00
Carlos Vicente
cacb0777b7 POD fixes to pass tests 2010-09-22 23:18:22 +00:00
Carlos Vicente
bdf5a80868 Adding LLDP support for Juniper and C3550 classes 2010-09-22 21:45:08 +00:00
Jeroen van Ingen
ad1f1933e2 Move Cisco CBS3xxx from generic L3::Cisco to L3::C6500 (mainly for community 
based indexing, to succesfully retrieve forwarding tables).
 2010-09-01 16:16:43 +00:00
Carlos Vicente
d7fe49a028 Additions to extract IPv6 addresses used in device interfaces 2010-08-25 00:09:42 +00:00
Jeroen van Ingen
e802ccdc6e Revert to status of rev 1.7, "peth_port_power" sub as a placeholder didn't 
work as expected (behaved as override, but should have been overridden)
 2010-08-23 14:45:04 +00:00
Jeroen van Ingen
af2a881142 Fixed error in IPv6 support for Extreme 2010-08-23 12:02:10 +00:00
Jeroen van Ingen
0ccf5409ca Fixed potential warnings about "Use of uninitialized value in string eq" 2010-08-23 11:47:58 +00:00
Jeroen van Ingen
2529305803 Add placeholder method peth_port_power() to PowerEthernet class; overrides 
to actually return data in Cisco, Extreme and HP classes.
 2010-08-23 11:38:55 +00:00
Jeroen van Ingen
bb8fb9d01a Initial version for Info::Ipv6 class. Not to be used directly, intended 
use is to be inherited by Info::Layer3.

This class provides mapping of IPv6 network addresses to Ethernet media
addresses (MACs) and interface indexes. It will try various MIBs; with
debug on, when data is returned, a message will be logged to inform which
MIB contained the relevant data.
 2010-08-11 16:41:29 +00:00
Jeroen van Ingen
665f33a482 Small fix for sysServices ("layers") check 2010-07-26 14:31:41 +00:00
Jeroen van Ingen
e5f948acda Allow support for devices without sysServices 2010-07-26 11:39:37 +00:00
Jeroen van Ingen
c28bbd5728 Changes to Info.pm to support devices that don't return sysServices.0 2010-07-26 11:32:48 +00:00
Jeroen van Ingen
262fa5a3cd Incorporate patch from jrbinks to support obscure Proxim/Orinoco device (item 
2688801 on SF). Fallback for all Agere (11898) devices to Orinoco class.
 2010-07-23 15:39:03 +00:00
Jeroen van Ingen
a58b774443 Added "vendor_i_type()" method to HP classes as suggested by Mikat1 on SF. 
Tracker artifact 2599795. Method can be used to determine more detailed
type information about a port, eg 10/100 interface, 1000Base-LX, etc.
Details are vendor specific.
 2010-07-23 15:07:58 +00:00
Brian de Wolf
6deceb6bd1 Fix for C1900 bp_index not containing interfaces. 2010-05-25 23:30:20 +00:00
Max Baker
808d3fd5c6 add PF Support 2010-05-07 00:01:33 +00:00
Max Baker
b82d3b82d9 update copyright and developers 2010-05-04 20:58:32 +00:00
Jeroen van Ingen
cb8d780d70 Added os_bin() method to CiscoStats. Determines ROM version on several 
Cisco switches and routers by scanning for version string in rom_id().
 2010-05-04 14:18:37 +00:00
Jeroen van Ingen
01cd78c75d Added table methods to %FUNCS in CDP.pm to retrieve management addresses 
of connected devices. Useful for improving neighbor detection in Netdisco.
 2010-05-03 14:51:35 +00:00
Brian de Wolf
e7b289c399 Add L3::CiscoFWSM for Cisco Firewall Services Modules. 2010-04-28 17:08:32 +00:00
Bill Fenner
a9b28c2270 For Cisco WLCs, pretend to have the CISCO-DOT11-MIB for signal strengths, etc. 2010-03-23 18:00:08 +00:00
Bill Fenner
5b059e6286 "arpnip" on Airespace: use the controller's snooping on the 
IP addresses of its clients, plus the knowledge of the APs'
IP and ethernet MAC addresses, to arpnip.  This is useful
when there is communication (between controller and AP,
or between wireless and wired devices) that does not cross
routers.
 2010-03-23 17:58:30 +00:00
Jeroen van Ingen
2c84636b7f Update to Juniper class: use Q-BRIDGE-MIB for switch forwarding tables 2010-02-06 12:52:54 +00:00