release 3.22

...and update ChangeLog

.gitignore

@@ -1,2 +1,9 @@
 *.db
 SNMP
+*.komodo*
+blib/
+META.*
+MYMETA.*
+Makefile
+Makefile.old
+pm_to_blib

ChangeLog

@@ -1,5 +1,150 @@
 SNMP::Info - Friendly OO-style interface to Network devices using SNMP.
 
+version 3.22 (2014-12-02)
+
+   [ENHANCEMENTS]
+
+    * Include LLDP support in base Layer2 and Layer3 classes. Due to the
+      widespread adoption of LLDP, this should improve mapping networks
+      when devices aren't supported in a more specific class.
+    * Support obtaining FDB in Avaya SPBM edge deployments in L2::Baystack
+      NOTE: This requires a RAPID-CITY MIB with the rcBridgeSpbmMacTable
+    * Support for Fortinet devices in new class L3::Fortinet
+
+   [ENHANCEMENTS]
+
+    * No longer ignore interfaces based on name, in base L2/L3/L7 device
+      classes. For several device classes SNMP::Info will now return tunnel
+      interfaces and/or loopbacks, if present.
+    * Use dot1qVlanCurrentTable if available to capture dynamic and static
+      VLANs, fall back to dot1qVlanStaticTable if not available.
+    * New method i_vlan_membership_untagged() for VLANs transmitted as
+      untagged frames.
+    * Capture Aruba AP hardware and software version when available 
+
+   [BUG FIXES]
+
+    * [#64] Misdetection: Wireless APs, add products MIB to L2::3Com
+    * Use FDB ID to VID mapping if available to determine end station VLAN
+      rather than assuming they are the same.
+    * Capture port VLANs on Cisco interfaces which are configured for
+      trunking but are not in operational trunking mode
+    * Correct munging of stp_p_port(), i_stp_port(), and stp_root() methods
+      in Bridge
+    * In LLDP.pm don't create a variable in a conditional
+
+version 3.20 (2014-09-08)
+
+   [NEW FEATURES]
+
+    * Override layers in Juniper for routers with switch modules
+
+   [BUG FIXES]
+
+    * Update MANIFEST to include Ubiquiti files
+
+version 3.19 (2014-08-01)
+
+   [NEW FEATURES]
+
+    * Support for Ubiquiti Access Points in new class L2::Ubiquiti (begemot)
+    * Preliminary support for 3Com switches in new class L2::3Com (begemot)
+
+   [BUG FIXES]
+
+    * Fix Avaya detection lldp_port()
+    * Silence uninitialized value warning in L3::Cisco
+    * H3C fixes (begemot)
+    * Only use L2::ZyXEL_DSLAM for ZyXEL DSL modules
+
+version 3.18 (2014-07-02)
+
+   [ENHANCEMENTS]
+
+    * Pseudo ENTITY-MIB methods added to L3::Tasman for hardware information
+    * Capture VPC Keepalive IP addresses in L3::Nexus (jeroenvi)
+    * L2::Netgear inheritance clean up and removal of unnecessary c_* methods
+      defined in Info base class
+
+   [BUG FIXES]
+
+    * Correctly identify device type (class) for instantiated objects which
+      have overridden layers.
+    * [#58] Fix inheritance in L3::FWSM and L3::CiscoASA
+    * [#71] Don't try to match on a false port description in lldp_if
+    * [#54] Possible bad values returned for cdp_id and lldp_port with some HP
+      gear (Joel Leonhardt)
+
+version 3.17 (2014-06-23)
+
+   [ENHANCEMENTS]
+
+    * POD tests are not required for distribution.
+
+version 3.16 (2014-06-23)
+
+   [ENHANCEMENTS]
+
+    * Add method resolution discovery in SNMP::Info::MRO helper module
+    * Consolidate CiscoImage class into CiscoStats class
+    * Clean up inheritance for Cisco classes.  With this change
+      all applicable classes now inherit CiscoAgg, CiscoStpExtensions,
+      CiscoPortSecurity, CiscoPower, and LLDP classes.
+    * Remove inheritance of classes the devices do not support in L3::FWSM
+      and L3::CiscoASA
+
+   [BUG FIXES]
+
+    * Use CiscoVTP methods to get interface VLAN in L3::Cisco rather than
+      solely relying on the interface description.
+
+version 3.15 (2014-07-10)
+
+   [NEW FEATURES]
+
+    * Offline mode and Cache export/priming.
+
+   [ENHANCEMENTS]
+
+    * Return serial number for Cisco 3850 from entPhysicalSerialNum
+
+   [BUG FIXES]
+
+    * Cisco SB serial number probably did not work
+
+version 3.14 (2014-06-07)
+
+   [ENHANCEMENTS]
+
+    * Improvements to Mikrotik module (Alex Z)
+    * Don't unshift length from broken lldpRemManAddrTable implementations (G. Shtern)
+    * 802.3ad LAG support in Layer3::H3C
+    * Add LLDP capabilities to Layer2::HPVC class
+
+   [BUG FIXES]
+
+    * Return correct VLAN info with qb_fw_table() on Layer2::HP
+
+version 3.13 (2014-03-27)
+
+   [ENHANCEMENTS]
+
+    * Cisco PAgP support added to LAG method
+    * HP ProCurve LAG support by inheriting Info::Aggregate class
+
+version 3.12 (2014-02-10)
+
+   [ENHANCEMENTS]
+
+    * Modify L3::Passport to obtain forwarding table information from
+      RAPID-CITY if information is not available in either Q-BRIDGE-MIB or
+      BRIDGE-MIB.  Needed for VSP 9000 prior to version 4.x (Tobias Gerlach)
+
+   [BUG FIXES]
+
+    * [#52] NETSCREEN-IP-ARP-MIB considered harmful
+    * Foundry/Brocade aggreate port master ifIndex resolved properly
+
 version 3.11 (2014-01-26)
 
    [NEW FEATURES]
@@ -103,7 +248,7 @@ version 3.08 (2013-10-22)
     * [#68] Fix device_port entries for switches with non-unique
       ifDesc (Nic Bernstein)
     * Don't try to munge undef values
-    * [#49] Perl 5.18 UNIVERSAL::can change could cause infinite loop 
+    * [#49] Perl 5.18 UNIVERSAL::can change could cause infinite loop
     * Silence warning from uninitialized variable in L3::Passport e_descr()
 
 version 3.07 (2013-10-01)
@@ -130,12 +275,11 @@ version 3.05 (2013-08-16)
       Layer2/CiscoSB class
     * Add proper LLDP support to Netgear.pm
     * Change $netgear->interfaces() to use ifName rather than ifDescr
-      as the former is unique per interface while the latter is not.  
+      as the former is unique per interface while the latter is not.
       If ifName is not present, concatenate ifDescr and ifIndex
       to achieve a unique value.
     * Properly report hardware version, Serial No. and OS Version for
       Netgear.
-    
 
 version 3.03 (2013-07-11)
 
@@ -165,7 +309,7 @@ version 3.01 (2013-04-13)
       they can be called directly, sonmp_ip(), cdp_ip(), etc.
     * L2::Bay and L2::Foundry have been removed from the distribution.  Both
       classes were depreciated and all functionality is available through
-      L2::Baystack and L3::Foundry. 
+      L2::Baystack and L3::Foundry.
 
     [NEW FEATURES]
 
@@ -195,7 +339,7 @@ version 3.01 (2013-04-13)
 
     [ENHANCEMENTS]
 
-    * UNIVERSAL::can() now works with dynamic methods 
+    * UNIVERSAL::can() now works with dynamic methods
     * Dynamically generated methods are added to symbol table to avoid
       AUTOLOAD on subsequent calls
     * L2::Airespace now supports 802.11n client tx rates
@@ -227,20 +371,20 @@ version 2.09 (2012-11-28)
     * New method i_ssidmac() to get BSSID's from AP's with initial support
       in L2::Aironet and Airespace classes
     * Support for Avaya Secure Routers in new class L3::Tasman
-    * Add EDP and LLDP L2 Topology to L3::Extreme 
+    * Add EDP and LLDP L2 Topology to L3::Extreme
     * [3185393] Support for Juniper SSL VPN in new class L7::Neoteris
-    * [3381027] Support for Cisco Nexus in new class L3::Nexus   
+    * [3381027] Support for Cisco Nexus in new class L3::Nexus
     * [1424336] Support for Extreme Discovery Protocol (EDP)
-    
+
     [ENHANCEMENTS]
 
-    * [3017571] Add LLDP support for NetSNMP device class (begemot) 
+    * [3017571] Add LLDP support for NetSNMP device class (begemot)
     * [3418918] Extreme devices now report OS as either extremeware or xos
     * [2809045] Strip preceding netscreen from model name in L3::Netscreen
     * [] Classify Linksys 2024 as L3::Dell (Rogier Krieger)
-    
+
     [BUG FIXES]
-    
+
     * Fixed logic to return cached data for table methods when available and
       not a partial fetch
     * Fix typo in PoD for Bridge.pm and CiscoConfig.pm (William Bulley)
@@ -260,7 +404,7 @@ version 2.08 (2012-07-15)
 
     * Pseudo ENTITY-MIB methods added to L3::Juniper for hardware information
     * Add method to report current transmit power of the radio interface,
-      dot11_cur_tx_pwr_mw(), in Airespace class 
+      dot11_cur_tx_pwr_mw(), in Airespace class
     * [3085411] Activate L3 properties for Netgear GSM7224v2 (phishphreek)
     * [3085413] SNMP OIDs for Netgear Serial and OS Ver (phishphreek)
     * [3286549] Dell LLDP Support (Nico Giefing)
@@ -309,7 +453,7 @@ version 2.06 (2011-09-28)
     * [3344843] Fix returning serial() and os_ver() for web-managable HP
       switches, introduced by HP/HP4000 class split, reported by J R Binks
     * [2809033] Put L2-only Cisco blade switches in L3::C6500
-    * [3408506] Fix uninitialized value in IPv6 when neighbor state is 
+    * [3408506] Fix uninitialized value in IPv6 when neighbor state is
       incomplete (Michael Borgelt)
 
 version 2.05 (2011-06-23)
@@ -325,13 +469,13 @@ version 2.04 (2011-03-31)
       (Brian De Wolf)
     + Added L3::Pf for FreeBSD PFSense Firewalls (max)
     * Added specific functions for neighbor mgmt addresses to CDP class
-    * Implemented os_bin() method in CiscoStats 
+    * Implemented os_bin() method in CiscoStats
     + [2980787] Fix for C1900 bp_index not containing interfaces.
       (Brian De Wolf)
     + [2599795] Added vendor_i_type() method to HP and HP4000 clases
     + [2688801] Minor modification for obscure Proxim/Orinoco device
       (jrbinks)
-    + [3051443] Add PoE measured power per port to Cisco, Extrme and HP 
+    + [3051443] Add PoE measured power per port to Cisco, Extrme and HP
       classes (jeroenvi)
     * Minor tweaks to support devices without sysServices
     * Added Cisco CBS3xxx blade switches to L3::C6500
@@ -369,7 +513,7 @@ version 2.00 (08/01/08)
     + Support for Alcatel-Lucent Service Router via L3::Timetra
     + Support for Alcatel-Lucent OmniAccess via L2::Aruba
 
-    * Silence warnings in MAU due to uninitialized variables 
+    * Silence warnings in MAU due to uninitialized variables
 
 version 1.09 (07/22/08) - Beta/developer release
     + Added support for HP ProCurve Foundry OEM switches, such as the 9300
@@ -393,7 +537,7 @@ version 1.09 (07/22/08) - Beta/developer release
     + Add support to specify MIB to resolve leaf names conflicts in
       %GLOBALS and %FUNCS.
     + Added munge_port_list() and modify_port_list() methods to assist in
-      working with PortList objects. 
+      working with PortList objects.
     + Added set_multi() method to enable a SNMP set command on several new
       values in one request.  Required for complex set operations
       on some agents.
@@ -420,7 +564,7 @@ version 1.05 (11/25/07) - CVS only. No official release
       Augenstein)
     + Added device specific support for LLDP in L2::HP, L2::Baystack,
       L3::Enterasys and L3::Foundry
-    + Added support for Enterasys devices as new class L3::Enterasys 
+    + Added support for Enterasys devices as new class L3::Enterasys
     + Added support for Dell PowerConnect switches as new class L3::Dell
     + Added basic support for generic routers running Microsoft Windows OS
       as new class L3::Microsoft (begemot)
@@ -444,7 +588,7 @@ version 1.05 (11/25/07) - CVS only. No official release
     + New class IEEE802dot11 class for generic standards based wireless AP
       support to include i_ssidlist()and i_80211channel() methods.
     + L2::Orinoco inherits from new IEEE802dot11 for i_ssidlist()and
-      i_80211channel() support. 
+      i_80211channel() support.
     + Added new VLAN methods i_pvid(), i_vlan_membership(), set_i_pvid(),
       set_i_vlan(), set_add_i_vlan_tagged(), set_remove_i_vlan_tagged() to
       Bridge, CiscoVTP, Extreme, HP, and RapidCity classes.
@@ -506,14 +650,14 @@ version 1.04 (07/08/06)
     +  Added C1130 and C1240 to L2::Aironet (Ralf Gross)
     +  Added detection for Cisco 2960, 2940, 3400 w/ MetroBase
     +  Added generic L2::Cisco Class
-    *  Corrected detection for Cisco Supervisor Engine 2 and 32 (IOS).  
+    *  Corrected detection for Cisco Supervisor Engine 2 and 32 (IOS).
     *  Fixed warnings in CiscoStack
     *  Updated ProCurve HP device detection for newer firmwares
 
 version 1.03 (04/14/06) - Beta/developer release
     * Use ipNetToMedia table instead of atTable for ARP
     * Remove CiscoStack from Layer3::C4000
-    * Fixed bug in MAU class when polling devices without MAU-MIB support 
+    * Fixed bug in MAU class when polling devices without MAU-MIB support
 
 version 1.01 (04/08/06) - Beta/developer release
     + Change version numbers to X.XX format.  Odd releases are beta
@@ -579,15 +723,15 @@ version 1.0 (04/07/06) - CVS only. No official release
       translated properly
 
 verison 0.9 (11/15/04)
-    + ** Added full Nortel/Bay/BayStack support 
-        by new developer Eric Miller.  
+    + ** Added full Nortel/Bay/BayStack support
+        by new developer Eric Miller.
         L2::Bay now depricated.
     + Added Alteon Ace support (Eric Miller)
     + Added Nortel Cotivity support (Eric Miller)
     + Added Nortel BayRS support (Eric Miller)
     + Added Nortel Centillion support (Eric Miller)
     + Added Nortel AP 222x support (Eric Miller)
-    + Added Orinco AP support (Eric Miller) 
+    + Added Orinco AP support (Eric Miller)
     + Added i_lastchange() per suggestion of Nicolai Petri
     + Added BULKWALK patch by Bradley Baetz - This should
           greatly speed up requests on SNMPv2c devices.
@@ -637,27 +781,27 @@ version 0.6 (06/18/03)
 
 version 0.5 (06/10/03)
     * Added ability to get paritial tables.  For example to get the
-      IP routing table for 128.114.*  you can do 
+      IP routing table for 128.114.*  you can do
       $ipr = $dev->ipr_dest('128.114');
     * Added IP Routing Table entries from RFC1213 to SNMP::Info
     * minor bug fixes
 
 version 0.4 (04/29/03)
-    * BIG CHANGE ! Internal Data structure has changed.  
+    * BIG CHANGE ! Internal Data structure has changed.
     * Added clear_cache() method
-    * Added NO_SUCH support for snmpget (TABLE) calls to get SNMP MIB II data 
+    * Added NO_SUCH support for snmpget (TABLE) calls to get SNMP MIB II data
       from SNMP Version 1 devices.
     * Methods load_all() and all() have changed their return value. Sorry but
       the API had to change.
     * New object methods snmp_comm(), snmp_ver(), store(), class(), nosuch()
       to make it more OO happy.
     * Globals are now cached
-    * Added new argument 'AutoSpecify' to new() to auto-connect with subclass 
+    * Added new argument 'AutoSpecify' to new() to auto-connect with subclass
       detected in device_type()
     * New method specify() returns a new subclass object
     * Subclasses are automatically loaded when specify or autospecify is used!
     * Added methods for Interface statistics (ifInOctets ...)
-    * Added methods for Memory and CPU statistics 
+    * Added methods for Memory and CPU statistics
     * Added SNMP::Info::Entity, moved out of L2-HP
     * Added SNMP::Info::Layer2::Aironet
 
@@ -670,7 +814,7 @@ version 0.3 (03/06/03)
       Thanks to Martin Lorensen <martin /at- lorensen.dk>
     * Removed requirement for SNMP in the Makefile.PL and moved it to t/prereq.t
       so that the Module will install via CPAN without trying to install the old
-      4.2.0 version of SNMP on CPAN.  Will now fail in the test phase. 
+      4.2.0 version of SNMP on CPAN.  Will now fail in the test phase.
       Thanks again to Martin Lorensen <martin /at- lorensen.dk>
     * Moved tests from test.pl to t/*
 
@@ -680,10 +824,10 @@ version 0.2 (02/19/03)
     * Fixed HP Detection in device_type()
     * Added Spanning Tree Protocol (STP) methods to SNMP::Info::Bridge
     * Removed HP Specific MIBS in SNMP::Info::Layer2 and cleaned up model()
-    * Added poke for Bay 450 Switches 
+    * Added poke for Bay 450 Switches
     * Mapped HP Part Numbers to model numbers J4812A => 2512 in
       SNMP::Info::Layer2::HP
-     
+
 version 0.1 (12/30/02)
     * Initial Release
     * SubClasses Included:
@@ -693,13 +837,13 @@ version 0.1 (12/30/02)
         * SNMP::Info::MAU
         * SNMP::Info::Layer1
               o SNMP::Info::Layer1::Allied
-              o SNMP::Info::Layer1::Asante 
+              o SNMP::Info::Layer1::Asante
         * SNMP::Info::Layer2
               o SNMP::Info::Layer2::Bay
               o SNMP::Info::Layer2::C1900
               o SNMP::Info::Layer2::C2900
               o SNMP::Info::Layer2::Catalyst
-              o SNMP::Info::Layer2::HP 
+              o SNMP::Info::Layer2::HP
         * SNMP::Info::Layer3
               o SNMP::Info::Layer3::Aironet
               o SNMP::Info::Layer3::Foundry

DeviceMatrix.txt

@@ -386,7 +386,7 @@ note: The Cisco 3000 device can return duplicate interface names, while Netdisco
 
 device: ASA
 note: The Cisco ASA is the successor of the PIX which was bought from Altiga Networks.
-Class: Layer3::CiscoASA
+class: Layer3::CiscoASA
 
 device-family: 1000
 duplex: no

Info.pm

@@ -24,7 +24,7 @@ use vars
     qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG %SPEED_MAP
     $NOSUCH $BIGINT $REPEATERS/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 =head1 NAME
 
@@ -32,7 +32,7 @@ SNMP::Info - OO Interface to Network devices and MIBs through SNMP
 
 =head1 VERSION
 
-SNMP::Info - Version 3.11
+SNMP::Info - Version 3.22
 
 =head1 AUTHOR
 
@@ -108,7 +108,7 @@ See L<http://netdisco.org/doc/DeviceMatrix.html> or L<DeviceMatrix.txt> for more
 =head1 SUPPORT
 
 Please direct all support, help, and bug requests to the snmp-info-users
-Mailing List at <http://lists.sourceforge.net/lists/listinfo/snmp-info-users>.
+Mailing List at L<http://lists.sourceforge.net/lists/listinfo/snmp-info-users>.
 
 =head1 DESCRIPTION 
 
@@ -282,12 +282,6 @@ These OIDs facilitate the writing of configuration files.
 
 See documentation in L<SNMP::Info::CiscoConfig> for details.
 
-=item SNMP::Info::CiscoImage
-
-F<CISCO-IMAGE-MIB>. A collection of OIDs providing IOS image characteristics.
-
-See documentation in L<SNMP::Info::CiscoImage> for details.
-
 =item SNMP::Info::CiscoPortSecurity
 
 F<CISCO-PORT-SECURITY-MIB> and F<CISCO-PAE-MIB>.
@@ -401,6 +395,12 @@ F<MAU-MIB> (RFC2668).  Some Layer2 devices use this for extended Ethernet
 
 See documentation in L<SNMP::Info::MAU> for details.
 
+=item SNMP::Info::MRO
+
+Method resolution introspection for SNMP::Info
+
+See documentation in L<SNMP::Info::MRO> for details.
+
 =item SNMP::Info::NortelStack
 
 F<S5-AGENT-MIB>, F<S5-CHASSIS-MIB>.
@@ -493,6 +493,12 @@ See documentation in L<SNMP::Info::Layer2> for details.
 
 =over
 
+=item SNMP::Info::Layer2::3Com
+
+SNMP::Info::Layer2::3Com - SNMP Interface to L2 3Com Switches
+
+See documentation in L<SNMP::Info::Layer2::3Com> for details.
+
 =item SNMP::Info::Layer2::Airespace
 
 Subclass for Cisco (Airespace) wireless controllers.
@@ -553,8 +559,9 @@ See documentation in L<SNMP::Info::Layer2::Centillion> for details.
 
 =item SNMP::Info::Layer2::Cisco
 
-Generic Cisco subclass for layer2 devices that are not yet supported
-in more specific subclasses.
+Generic Cisco subclass for layer 2 devices that are not yet supported
+in more specific subclassesand the base layer 2 Cisco class for
+other device specific layer 2 Cisco classes.
 
 See documentation in L<SNMP::Info::Layer2::Cisco> for details.
 
@@ -623,6 +630,12 @@ SNMP Interface to Juniper (Trapeze) Wireless Controllers
 
 See documentation in L<SNMP::Info::Layer2::Trapeze> for details.
 
+=item SNMP::Info::Layer2::Ubiquiti
+
+SNMP Interface to Ubiquiti Access Points
+
+See documentation in L<SNMP::Info::Layer2::Ubiquiti> for details.
+
 =item SNMP::Info::Layer2::ZyXEL_DSLAM
 
 Zyxel DSLAMs.  Need I say more?
@@ -711,7 +724,8 @@ See documentation in L<SNMP::Info::Layer3::C6500> for details.
 
 =item SNMP::Info::Layer3::Cisco
 
-This is a simple wrapper around Layer3 for IOS devices.  It adds on CiscoVTP.
+This is a simple wrapper around layer 3 for IOS devices and the base layer 3
+Cisco class for other device specific layer 3 Cisco classes.
 
 See documentation in L<SNMP::Info::Layer3::Cisco> for details.
 
@@ -727,6 +741,11 @@ Subclass for Cisco Firewall Services Modules.
 
 See documentation in L<SNMP::Info::Layer3::CiscoFWSM> for details.
 
+=item SNMP::Info::Layer3::CiscoSwitch
+
+Base class for L3 Cisco switches.  See documentation in
+L<SNMP::Info::Layer3::CiscoSwitch> for details.
+
 =item SNMP::Info::Layer3::Contivity
 
 Subclass for Avaya/Nortel Contivity/VPN Routers.  
@@ -765,6 +784,12 @@ Subclass for Force10 devices.
 
 See documentation in L<SNMP::Info::Layer3::Force10> for details.
 
+=item SNMP::Info::Layer3::Fortinet
+
+Subclass for Fortinet devices.
+
+See documentation in L<SNMP::Info::Layer3::Fortinet> for details.
+
 =item SNMP::Info::Layer3::Foundry
 
 Subclass for Brocade (Foundry) Network devices.
@@ -1053,6 +1078,20 @@ SNMP::Session object to use instead of connecting on own.
 
 (default creates session automatically)
 
+=item Offline
+
+Causes SNMP::Info to avoid network activity and return data only from its
+cache. If you ask for something not in the cache, an error is thrown.  See
+also the C<cache()> and C<offline()> methods.
+
+(default 0, which means "online")
+
+=item Cache
+
+Pass in a HashRef to prime the cache of retrieved data. Useful for creating an
+instance in C<Offline> mode from a previously dumped cache. See also the
+C<cache()> method to retrieve a cache after running actial queries.
+
 =item OTHER
 
 All other arguments are passed to SNMP::Session.
@@ -1142,6 +1181,16 @@ sub new {
         delete $sess_args{IgnoreNetSNMPConf};
     }
 
+    if ( defined $args{Offline} ) {
+        $new_obj->{Offline} = $args{Offline} || 0;
+        delete $sess_args{Offline};
+    }
+
+    if ( defined $args{Cache} and ref {} eq ref $args{Cache} ) {
+        $new_obj->{$_} = $args{Cache}->{$_} for keys %{$args{Cache}};
+        delete $sess_args{Cache};
+    }
+
     my $sess = undef;
     if ( defined $args{Session} ) {
         $sess = $args{Session};
@@ -1266,6 +1315,9 @@ data from a method.
 Run $info->clear_cache() to clear the cache to allow reload of both globals
 and table methods.
 
+The cache can be retreved or set using the $info->cache() method. This works
+together with the C<Offline> option.
+
 =head2 Object Scalar Methods
 
 These are for package related data, not directly supplied
@@ -1314,6 +1366,50 @@ sub debug {
     return $self->{debug};
 }
 
+=item $info->offline([1|0])
+
+Returns if offline mode is currently turned on for this object.
+
+Optionally sets the Offline parameter.
+
+=cut
+
+sub offline {
+    my $self = shift;
+    my $ol   = shift;
+
+    if ( defined $ol ) {
+        $self->{Offline} = $ol;
+    }
+    return $self->{Offline};
+}
+
+=item $info->cache([new_cache])
+
+Returns a HashRef of all cached data in this object. There will be a C<store>
+key for table data and then one key for each leaf.
+
+Optionally sets the cache parameters if passed a HashRef.
+
+=cut
+
+sub cache {
+    my $self = shift;
+    my $data = shift;
+
+    if ( defined $data and ref {} eq ref $data ) {
+        $self->{$_} = $data->{$_} for keys %$data;
+    }
+
+    my $cache = { store => $self->{store} };
+    foreach my $key ( keys %$self ) {
+        next unless defined $key;
+        next unless $key =~ /^_/;
+        $cache->{$key} = $self->{$key};
+    }
+    return $cache;
+}
+
 =item $info->bulkwalk([1|0])
 
 Returns if bulkwalk is currently turned on for this object.
@@ -1400,6 +1496,7 @@ sub device_type {
         11   => 'SNMP::Info::Layer2::HP',
         18   => 'SNMP::Info::Layer3::BayRS',
         42   => 'SNMP::Info::Layer3::Sun',
+        43   => 'SNMP::Info::Layer2::3Com',
         45   => 'SNMP::Info::Layer2::Baystack',
         171  => 'SNMP::Info::Layer3::Dell',
         244  => 'SNMP::Info::Layer3::Lantronix',
@@ -1423,8 +1520,12 @@ sub device_type {
         6527 => 'SNMP::Info::Layer3::Timetra',
         8072 => 'SNMP::Info::Layer3::NetSNMP',
         9303 => 'SNMP::Info::Layer3::PacketFront',
+        10002 => 'SNMP::Info::Layer2::Ubiquiti',
         12325 => 'SNMP::Info::Layer3::Pf',
+        12356 => 'SNMP::Info::Layer3::Fortinet',
+        14179 => 'SNMP::Info::Layer2::Airespace',
         14525 => 'SNMP::Info::Layer2::Trapeze',
+        14823 => 'SNMP::Info::Layer3::Aruba',
         14988 => 'SNMP::Info::Layer3::Mikrotik',
         17163 => 'SNMP::Info::Layer3::Steelhead',
         25506 => 'SNMP::Info::Layer3::H3C',
@@ -1436,6 +1537,7 @@ sub device_type {
     my %l2sysoidmap = (
         9     => 'SNMP::Info::Layer2::Cisco',
         11    => 'SNMP::Info::Layer2::HP',
+        43    => 'SNMP::Info::Layer2::3Com',
         45    => 'SNMP::Info::Layer2::Baystack',
         171   => 'SNMP::Info::Layer3::Dell',
         207   => 'SNMP::Info::Layer2::Allied',
@@ -1458,6 +1560,10 @@ sub device_type {
         26543 => 'SNMP::Info::Layer3::IBMGbTor',
     );
 
+    my %l1sysoidmap = (
+        2925  => 'SNMP::Info::Layer1::Cyclades',
+    );
+
     my %l7sysoidmap = (
         318   => 'SNMP::Info::Layer7::APC',
         5951  => 'SNMP::Info::Layer7::Netscaler',
@@ -1572,9 +1678,23 @@ sub device_type {
         # Starting with IOS 15, Aironet reports sysServices 6, even though
         # it still is the same layer2 access point.
         $objtype = 'SNMP::Info::Layer2::Aironet'
-            if ($desc =~ /\b(C1100|C1130|C1140|AP1200|C350|C1200|C1240|C1250)\b/
+            if ($desc =~ /\b(C1100|C1130|C1140|AP1200|C350|C1200|C1240|C1250|C2700|C3700)\b/
             and $desc =~ /\bIOS\b/ );
 
+        # Airespace (WLC) Module
+        $objtype = 'SNMP::Info::Layer2::Airespace'
+            if ( $desc =~ /^Cisco Controller$/ );
+
+        #Nortel 2270
+        $objtype = 'SNMP::Info::Layer2::N2270'
+            if (
+            $desc =~ /Nortel\s+(Networks\s+)??WLAN\s+-\s+Security\s+Switch/ );
+
+        # Nortel (Trapeze) WSS 2300 Series
+        $objtype = 'SNMP::Info::Layer2::NWSS2300'    
+            if (
+            $desc =~ /^(Nortel\s)??Wireless\sSecurity\sSwitch\s23[568][012]\b/);
+
         # Generic device classification based upon sysObjectID
         if (    ( $objtype eq 'SNMP::Info::Layer3' )
             and ( defined($id) )
@@ -1592,6 +1712,18 @@ sub device_type {
 
         # Device Type Overrides
 
+        #  Bay Hub (Needed here for layers override)
+        $objtype = 'SNMP::Info::Layer1::Bayhub'
+            if ( $desc =~ /\bNMM.*Agent/ );
+        $objtype = 'SNMP::Info::Layer1::Bayhub'
+            if ( $desc =~ /\bBay\s*Stack.*Hub/i );
+
+        #  Synoptics Hub (Needed here for layers override)
+        #  This will override Bay Hub only for specific devices supported
+        #  by this class
+        $objtype = 'SNMP::Info::Layer1::S3000'
+            if ( $desc =~ /\bNMM\s+(281|3000|3030)/i );
+
         #   Catalyst 1900 series override
         $objtype = 'SNMP::Info::Layer2::C1900'
             if ( $desc =~ /catalyst/i and $desc =~ /\D19\d{2}/ );
@@ -1678,7 +1810,7 @@ sub device_type {
 
         # Airespace (WLC) Module
         $objtype = 'SNMP::Info::Layer2::Airespace'
-            if ( $desc =~ /Cisco Controller/ );
+            if ( $desc =~ /^Cisco Controller$/ );
 
         #Nortel 2270
         $objtype = 'SNMP::Info::Layer2::N2270'
@@ -1689,6 +1821,9 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer2::HPVC'
             if ( $desc =~ /HP\sVC\s/ );
 
+        $objtype = 'SNMP::Info::Layer2::ZyXEL_DSLAM'
+            if ( $desc =~ /8-port .DSL Module\(Annex .\)/i );
+
         # Generic device classification based upon sysObjectID
         if (    ( $objtype eq 'SNMP::Info::Layer2' )
             and ( defined($id) )
@@ -1712,12 +1847,20 @@ sub device_type {
             if ( $desc =~ /\bBay\s*Stack.*Hub/i );
 
         #  Synoptics Hub
-        #  This will override Bay Hub only for specific devices supported by this class
+        #  This will override Bay Hub only for specific devices supported
+        #  by this class
         $objtype = 'SNMP::Info::Layer1::S3000'
             if ( $desc =~ /\bNMM\s+(281|3000|3030)/i );
 
-        # These devices don't claim to have Layer1-3 but we like em anyways.
+        # Generic device classification based upon sysObjectID
+        if (    ( $objtype eq 'SNMP::Info::Layer1' )
+            and ( defined($id) )
+            and ( exists( $l1sysoidmap{$id} ) ) )
+        {
+            $objtype = $l1sysoidmap{$id};
+        }
     }
+    # These devices don't claim to have Layer1-3 but we like em anyways.
     else {
         $objtype = 'SNMP::Info::Layer2::ZyXEL_DSLAM'
             if ( $desc =~ /8-port .DSL Module\(Annex .\)/i );
@@ -1744,7 +1887,8 @@ sub device_type {
 
         # Nortel (Trapeze) WSS 2300 Series
         $objtype = 'SNMP::Info::Layer2::NWSS2300'    
-            if ( $desc =~ /\bWireless\sSecurity\sSwitch\s23[568][012]\b/);
+            if (
+            $desc =~ /^(Nortel\s)??Wireless\sSecurity\sSwitch\s23[568][012]\b/);
 
         # Generic device classification based upon sysObjectID
         if ( defined($id) and $objtype eq 'SNMP::Info') {
@@ -3273,7 +3417,7 @@ sub munge_mac {
 
 =item munge_prio_mac()
 
-Takes an 8-byte octet stream (HEX-STRING) and returns a colon separated ASCII
+Takes an 2-byte octet stream (HEX-STRING) and returns a colon separated ASCII
 hex string.
 
 =cut
@@ -3287,6 +3431,22 @@ sub munge_prio_mac {
     return;
 }
 
+=item munge_prio_port()
+
+Takes an 8-byte octet stream (HEX-STRING) and returns a colon separated ASCII
+hex string.
+
+=cut
+
+sub munge_prio_port {
+    my $mac = shift;
+    return unless defined $mac;
+    return unless length $mac;
+    $mac = join( ':', map { sprintf "%02x", $_ } unpack( 'C*', $mac ) );
+    return $mac if $mac =~ /^([0-9A-F][0-9A-F]:){1}[0-9A-F][0-9A-F]$/i;
+    return;
+}
+
 =item munge_octet2hex()
 
 Takes a binary octet stream and returns an ASCII hex string
@@ -3649,6 +3809,12 @@ sub _global {
             } 
         }
 
+        if ( $self->{Offline} ) {
+            $self->error_throw(
+                "SNMP::Info::_global: Offline but $attr is not in cache\n" );
+            return;
+        }
+
         if ( $self->debug() ) {
             # Let's get the MIB Module and leaf name along with the OID
             my $qual_leaf = SNMP::translateObj($oid,0,1) || '';
@@ -3973,6 +4139,12 @@ sub _load_attr {
             && !$load
             && !defined $partial );
 
+        if ( $self->{Offline} ) {
+            $self->error_throw(
+                "SNMP::Info::_load_atrr: Offline but $attr is not in cache\n" );
+            return;
+        }
+
         # We want the qualified leaf name so that we can
         # specify the Module (MIB) in the case of private leaf naming
         # conflicts.  Example: ALTEON-TIGON-SWITCH-MIB::agSoftwareVersion
@@ -4182,6 +4354,7 @@ sub snmp_connect_ip {
     my $ver  = $self->snmp_ver();
     my $comm = $self->snmp_comm();
 
+    return if $self->{Offline};
     return if ( $ip eq '0.0.0.0' ) or ( $ip =~ /^127\./ );
 
     # Create session object

Info/AMAP.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS
     = ( 'ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB' => 'aipAMAPRemDeviceType', );

Info/AdslLine.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'ADSL-LINE-MIB' => 'adslLineType' );
 

Info/Aggregate.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (); # IF-MIB
 

Info/Airespace.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,

Info/Bridge.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'BRIDGE-MIB'   => 'dot1dBaseBridgeAddress',
@@ -84,6 +84,17 @@ $VERSION = '3.11';
     'bs_to'     => 'dot1dStaticAllowedToGoTo',
     'bs_status' => 'dot1dStaticStatus',
 
+    # These leafs are not part of a table, but placed here
+    # to return a hash reference to ease API compatibility with
+    # MST and PVST implementations indexed by a spanning tree
+    # instance id
+    'stp_i_mac'       => 'dot1dBaseBridgeAddress',
+    'stp_i_time'      => 'dot1dStpTimeSinceTopologyChange',
+    'stp_i_ntop'      => 'dot1dStpTopChanges',
+    'stp_i_root'      => 'dot1dStpDesignatedRoot',
+    'stp_i_root_port' => 'dot1dStpRootPort',
+    'stp_i_priority'  => 'dot1dStpPriority',
+
     # Spanning Tree Protocol Table : dot1dStpPortTable
     'stp_p_id'       => 'dot1dStpPort',
     'stp_p_priority' => 'dot1dStpPortPriority',
@@ -125,15 +136,18 @@ $VERSION = '3.11';
     'b_mac'            => \&SNMP::Info::munge_mac,
     'fw_mac'           => \&SNMP::Info::munge_mac,
     'bs_mac'           => \&SNMP::Info::munge_mac,
-    'stp_root'         => \&SNMP::Info::munge_mac,
+    'stp_root'         => \&SNMP::Info::munge_prio_mac,
+    'stp_i_mac'        => \&SNMP::Info::munge_mac,
+    'stp_i_root'       => \&SNMP::Info::munge_prio_mac,
     'stp_p_root'       => \&SNMP::Info::munge_prio_mac,
     'stp_p_bridge'     => \&SNMP::Info::munge_prio_mac,
-    'stp_p_port'       => \&SNMP::Info::munge_prio_mac,
+    'stp_p_port'       => \&SNMP::Info::munge_prio_port,
     'qb_cv_egress'     => \&SNMP::Info::munge_port_list,
     'qb_cv_untagged'   => \&SNMP::Info::munge_port_list,
     'qb_v_egress'      => \&SNMP::Info::munge_port_list,
     'qb_v_fbdn_egress' => \&SNMP::Info::munge_port_list,
     'qb_v_untagged'    => \&SNMP::Info::munge_port_list,
+    'qb_cv_untagged'   => \&SNMP::Info::munge_port_list,
 
 );
 
@@ -163,10 +177,20 @@ sub qb_fw_vlan {
     my $partial = shift;
 
     my $qb_fw_port = $bridge->qb_fw_port($partial);
+    my $qb_fdb_ids = $bridge->qb_fdb_index() || {};
+
+
     my $qb_fw_vlan = {};
     foreach my $idx ( keys %$qb_fw_port ) {
         my ( $fdb_id, $mac ) = _qb_fdbtable_index($idx);
-        $qb_fw_vlan->{$idx} = $fdb_id;
+        # Many devices do not populate the dot1qVlanCurrentTable, so default
+        # to FDB ID = VID, but if we have a mapping use it.  
+        my $vlan = $fdb_id;
+        # defined as test since some devices have a vlan 0
+        if (defined $qb_fdb_ids->{$fdb_id}) {
+            $vlan = $qb_fdb_ids->{$fdb_id};
+        }
+        $qb_fw_vlan->{$idx} = $vlan;
     }
     return $qb_fw_vlan;
 }
@@ -189,6 +213,25 @@ sub qb_i_vlan_t {
     return $i_vlan;
 }
 
+sub qb_fdb_index {
+    my $bridge  = shift;
+    my $partial = shift;
+
+    # Some devices may not implement TimeFilter in a standard manner
+    # appearing to loop on this request.  Override in the device class,
+    # see Enterasys for example.
+    my $qb_fdb_ids = $bridge->dot1qVlanFdbId() || {};
+
+    # Strip the TimeFilter
+    my $vl_fdb_index = {};
+    for my $orig (keys(%$qb_fdb_ids)) {
+        (my $new = $orig) =~ s/^\d+\.//;
+        $vl_fdb_index->{$new} = $qb_fdb_ids->{$orig};
+    }
+
+    return $vl_fdb_index;
+}
+
 # Most devices now support Q-BRIDGE-MIB, fall back to 
 # BRIDGE-MIB for those that don't.
 sub fw_mac {
@@ -343,20 +386,31 @@ sub i_vlan_membership {
     my $bridge  = shift;
     my $partial = shift;
 
-    my $index = $bridge->bp_index();
+    # Use VlanCurrentTable if available since it will include dynamic
+    # VLANs.  However, some devices do not populate the table.
+    my $v_ports = $bridge->qb_cv_egress() || $bridge->qb_v_egress();
+
+    return $bridge->_vlan_hoa($v_ports, $partial);
+}
+
+sub i_vlan_membership_untagged {
+    my $bridge  = shift;
+    my $partial = shift;
 
     # Use VlanCurrentTable if available since it will include dynamic
     # VLANs.  However, some devices do not populate the table.
+    my $v_ports = $bridge->qb_cv_untagged() || $bridge->qb_v_untagged();
 
-    # 11/07 - Todo: Issue with some devices trying to query VlanCurrentTable
-    # as table may grow very large with frequent VLAN changes.
-    # 06/08 - VlanCurrentTable may be due to timefilter, should query with
-    # zero partial for no time filter.
-    # my $v_ports = $bridge->qb_cv_egress() || $bridge->qb_v_egress();
+    return $bridge->_vlan_hoa($v_ports, $partial);
+}
 
-    my $v_ports = $bridge->qb_v_egress() || {};
+sub _vlan_hoa {
+    my $bridge = shift;
+    my ( $v_ports, $partial ) = @_;
 
-    my $i_vlan_membership = {};
+    my $index = $bridge->bp_index();
+
+    my $vlan_hoa = {};
     foreach my $idx ( keys %$v_ports ) {
         next unless ( defined $v_ports->{$idx} );
         my $portlist = $v_ports->{$idx};
@@ -376,10 +430,10 @@ sub i_vlan_membership {
             my $ifindex = $index->{$port};
             next unless ( defined($ifindex) );    # shouldn't happen
             next if ( defined $partial and $ifindex !~ /^$partial$/ );
-            push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
+            push( @{ $vlan_hoa->{$ifindex} }, $vlan );
         }
     }
-    return $i_vlan_membership;
+    return $vlan_hoa;
 }
 
 sub set_i_pvid {
@@ -649,11 +703,21 @@ IDs.  These are the VLANs which are members of the egress list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $bridge->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $bridge->qb_i_vlan_t()
 
 Returns reference to hash: key = C<dot1dBasePort>, value = either 'trunk' for
 tagged ports or the VLAN ID.
 
+=item $bridge->qb_fdb_index()
+
+Returns reference to hash: key = VLAN ID, value = FDB ID.
+
 =item $bridge->v_index()
 
 Returns VLAN IDs
@@ -707,6 +771,48 @@ to this port.
 
 =back
 
+=head2 Spanning Tree Instance Globals
+
+These are not part of a table, but return a hash reference to ease API
+compatibility with MST and PVST implementations indexed by a spanning tree
+instance id.
+
+=over
+
+=item $bridge->stp_i_time()
+
+Returns time since last topology change detected. (100ths/second)
+
+(C<dot1dStpTimeSinceTopologyChange>)
+
+=item $bridge->stp_i_time()
+
+Returns the total number of topology changes detected.
+
+(C<dot1dStpTopChanges>)
+
+=item $bridge->stp_i_root()
+
+Returns root of STP.
+
+(C<dot1dStpDesignatedRoot>)
+
+=item $bridge->stp_i_root_port()
+
+Returns the port number of the port that offers the lowest cost path
+to the root bridge.
+
+(C<dot1dStpRootPort>)
+
+=item $bridge->stp_i_priority()
+
+Returns the port number of the port that offers the lowest cost path
+to the root bridge.
+
+(C<dot1dStpPriority>)
+
+=back
+
 =head2 Spanning Tree Protocol Table (C<dot1dStpPortTable>)
 
 Descriptions are straight from F<BRIDGE-MIB.my>

Info/CDP.pm

@@ -43,7 +43,7 @@ use SNMP::Info;
 use vars
     qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT %CDP_CAPABILITIES/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # Five data structures required by SNMP::Info
 %MIBS = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' );
@@ -62,7 +62,7 @@ $VERSION = '3.11';
     'cdp_proto'        => 'cdpCacheAddressType',
     'cdp_addr'         => 'cdpCacheAddress',
     'cdp_ver'          => 'cdpCacheVersion',
-    'cdp_id'           => 'cdpCacheDeviceId',
+    'cdp_dev_id'       => 'cdpCacheDeviceId',
     'cdp_port'         => 'cdpCacheDevicePort',
     'cdp_platform'     => 'cdpCachePlatform',
     'cdp_capabilities' => 'cdpCacheCapabilities',
@@ -81,7 +81,6 @@ $VERSION = '3.11';
     'cdp_platform'     => \&SNMP::Info::munge_null,
     'cdp_domain'       => \&SNMP::Info::munge_null,
     'cdp_port'         => \&SNMP::Info::munge_null,
-    'cdp_id'           => \&SNMP::Info::munge_null,
     'cdp_ver'          => \&SNMP::Info::munge_null,
     'cdp_ip'           => \&SNMP::Info::munge_ip,
     'cdp_power'        => \&munge_power,
@@ -210,6 +209,22 @@ sub cdp_cap {
     return \%cdp_cap;
 }
 
+sub cdp_id {
+    my $cdp    = shift;
+    my $partial = shift;
+
+    my $ch = $cdp->cdp_dev_id($partial) || {};
+
+    my %cdp_id;
+    foreach my $key ( sort keys %$ch ) {
+        my $id = $ch->{$key};
+        next unless $id;
+        $id = SNMP::Info::munge_mac($id) || SNMP::Info::munge_null($id);
+        $cdp_id{$key} = $id;
+    }
+    return \%cdp_id;
+}
+
 1;
 __END__
 

Info/CiscoAgg.pm

@@ -43,7 +43,7 @@ use SNMP::Info::IEEE802dot3ad 'agg_ports_lag';
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
   %SNMP::Info::IEEE802dot3ad::MIBS,
@@ -56,11 +56,31 @@ $VERSION = '3.11';
 
 %MUNGE = ();
 
-# until someone using PAgP sends us a patch
-sub agg_ports_pagp { {} }
+sub agg_ports_pagp {
+  my $dev = shift;
+
+  # Note that this mapping will miss any interfaces that are down during
+  # polling. If one of the members is up, we could use
+  # pagpAdminGroupCapability to figure things out, but if they're all
+  # down, we're hosed. Since we could be hosed anyway, we skip the fancy
+  # stuff.
+  my $mapping = {};
+  my $group = $dev->pagpGroupIfIndex;
+  for my $slave (keys %$group) {
+    my $master = $group->{$slave};
+    next if($master == 0 || $slave == $master);
+
+    $mapping->{$slave} = $master;
+  }
+
+  return $mapping;
+}
 
 # until we have PAgP data and need to combine with LAG data
-sub agg_ports { return agg_ports_lag(@_) }
+sub agg_ports {
+  my $ret = {%{agg_ports_pagp(@_)}, %{agg_ports_lag(@_)}};
+  return $ret;
+}
 
 1;
 
@@ -122,7 +142,8 @@ ifIndex of the corresponding master ports.
 
 =item C<agg_ports_pagp>
 
-Unimplemented. Returns an empty HASH reference.
+Implements the PAgP LAG info retrieval. Merged into C<agg_ports> data
+automatically.
 
 =back
 

Info/CiscoConfig.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'CISCO-CONFIG-COPY-MIB' => 'ccCopyTable',

Info/CiscoImage.pm

@@ -1,115 +0,0 @@
-# $Id$
-#
-# Copyright (c) 2005 Matt Tuttle
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-
-package SNMP::Info::CiscoImage;
-
-use strict;
-use Exporter;
-use SNMP::Info;
-
-@SNMP::Info::CiscoImage::ISA       = qw/SNMP::Info Exporter/;
-@SNMP::Info::CiscoImage::EXPORT_OK = qw//;
-
-use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
-
-$VERSION = '3.11';
-
-%MIBS = ( 'CISCO-IMAGE-MIB' => 'ciscoImageString', );
-
-%GLOBALS = ();
-
-%FUNCS = ( 'ci_images' => 'ciscoImageString', );
-
-%MUNGE = ();
-
-1;
-__END__
-
-=head1 NAME
-
-SNMP::Info::CiscoImage - SNMP Interface to image strings for Cisco Devices
-
-=head1 AUTHOR
-
-Matt Tuttle (C<mtuttle@americanhebrewacademy.org>)
-
-=head1 SYNOPSIS
-
- # Let SNMP::Info determine the correct subclass for you.
- my $ci = new SNMP::Info(
-                AutoSpecify => 1,
-                Debug       => 1,
-                # These arguments are passed directly on to SNMP::Session
-                DestHost    => 'myswitch',
-                Community   => 'public',
-                Version     => 2
-                )
-    or die "Can't connect to DestHost.\n";
-
- my $class = $ci->class();
- print "SNMP::Info determined this device to fall under subclass : $class\n";
-
-=head1 DESCRIPTION
-
-SNMP::Info::CiscoImage is a subclass of SNMP::Info that provides access to
-image strings embedded in an image running on Cisco Devices.
-
-Use or create in a subclass of SNMP::Info.  Do not use directly.
-
-=head2 Inherited Classes
-
-None.
-
-=head2 Required MIBs
-
-=over
-
-=item F<CISCO-IMAGE-MIB>
-
-=back
-
-MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
-
-=head1 GLOBALS
-
-None.
-
-=head1 TABLE METHODS
-
-=over
-
-=item $ci->ci_images()
-
-Returns the table of image strings.
-
-C<ciscoImageString>
-
-=back
-
-=cut

Info/CiscoPortSecurity.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PAECAPABILITIES/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'CISCO-PORT-SECURITY-MIB' => 'ciscoPortSecurityMIB',

Info/CiscoPower.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'CISCO-POWER-ETHERNET-EXT-MIB' => 'cpeExtPsePortEntPhyIndex',
           'CISCO-CDP-MIB' => 'cdpCachePowerConsumption' );

Info/CiscoQOS.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'CISCO-CLASS-BASED-QOS-MIB' => 'cbQosIfIndex', );
 

Info/CiscoRTT.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'CISCO-RTTMON-MIB' => 'rttMonCtrlAdminOwner', );
 

Info/CiscoStack.pm

@@ -32,14 +32,13 @@ package SNMP::Info::CiscoStack;
 
 use strict;
 use Exporter;
-use SNMP::Info;
 
-@SNMP::Info::CiscoStack::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoStack::ISA       = qw/Exporter/;
 @SNMP::Info::CiscoStack::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'CISCO-STACK-MIB' => 'ciscoStackMIB', );
 

Info/CiscoStats.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'SNMPv2-MIB'            => 'sysDescr',
@@ -88,6 +88,9 @@ $VERSION = '3.11';
 
     # CISCO-FLASH-MIB::ciscoFlashDeviceTable
     'cisco_flash_size' => 'ciscoFlashDeviceSize',
+    
+    # CISCO-IMAGE-MIB
+    'ci_images' => 'ciscoImageString',
 );
 
 %MUNGE = ();
@@ -539,4 +542,16 @@ zero if the device has been removed.
 
 =back
 
+=head2 Cisco Image Table (C<ciscoImageTable>)
+
+=over
+
+=item $ci->ci_images()
+
+Returns the table of image strings.
+
+C<ciscoImageString>
+
+=back
+
 =cut

Info/CiscoStpExtensions.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Bridge;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 @SNMP::Info::CiscoStpExtensions::ISA = qw/SNMP::Info::Bridge SNMP::Info Exporter/;
 @SNMP::Info::CiscoStpExtensions::EXPORT_OK = qw//;

Info/CiscoVTP.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'CISCO-VTP-MIB'                       => 'vtpVlanName',
@@ -149,6 +149,7 @@ sub i_vlan {
 
     my $port_vlan      = $vtp->vtp_trunk_native($partial)   || {};
     my $i_vlan         = $vtp->i_vlan2($partial)            || {};
+    my $trunk_dyn      = $vtp->vtp_trunk_dyn($partial)      || {};
     my $trunk_dyn_stat = $vtp->vtp_trunk_dyn_stat($partial) || {};
 
     my %i_vlans;
@@ -165,15 +166,23 @@ sub i_vlan {
     foreach my $port ( keys %$port_vlan ) {
         my $vlan = $port_vlan->{$port};
         next unless defined $vlan;
+
+        # ports up and trunking should have a trunking status
         my $stat = $trunk_dyn_stat->{$port};
-        if ( defined $stat and $stat =~ /^trunking/ ) {
+
+        # vtp_trunk_dyn_stat is not useful for down ports
+        # so we use vtp_trunk_dyn to see if trunking is set
+        my $dyn = $trunk_dyn->{$port};
+        
+        if (($stat and $stat =~ /^trunking/ )
+            or ($dyn and (($dyn eq 'on') or ($dyn eq 'onNoNegotiate'))))
+        {
             $i_vlans{$port} = $vlan;
         }
     }
 
     # Check in CISCO-VLAN-IFTABLE-RELATION-MIB
-    # Is this only for Aironet???  If so, it needs
-    # to be removed from this class
+    # Used for traditional Cisco Routers and Aironet
 
     my $v_cvi_if = $vtp->v_cvi_if();
     if ( defined $v_cvi_if ) {
@@ -218,6 +227,7 @@ sub i_vlan_membership {
     my $vtp_vlans      = $vtp->v_state();
     my $i_vlan         = $vtp->i_vlan2($partial)            || {};
     my $trunk_dyn_stat = $vtp->vtp_trunk_dyn_stat($partial) || {};
+    my $trunk_dyn      = $vtp->vtp_trunk_dyn($partial)      || {};
 
     my $i_vlan_membership = {};
 
@@ -249,7 +259,9 @@ sub i_vlan_membership {
 
     foreach my $port ( keys %$ports_vlans ) {
         my $stat = $trunk_dyn_stat->{$port};
-        if ( defined $stat and $stat =~ /^trunking/ ) {
+        my $dyn = $trunk_dyn->{$port};
+        if (($stat and $stat =~ /^trunking/ )
+            or ($dyn and (($dyn eq 'on') or ($dyn eq 'onNoNegotiate')))) {
             my $k     = 0;
             my $list1 = $ports_vlans->{$port} || '0';
             my $list2 = $ports_vlans_2k->{$port} || '0';
@@ -271,6 +283,20 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $vtp  = shift;
+    my $partial = shift;
+
+    my $vlans = $vtp->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    
+    return $i_vlan_membership;
+}
+
 sub set_i_pvid {
     my $vtp = shift;
     my ( $vlan_id, $ifindex ) = @_;
@@ -591,6 +617,12 @@ IDs.  These are the VLANs which are members of enabled VLAN list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $vtp->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =back
 
 =head2 VLAN Table (C<CISCO-VTP-MIB::vtpVlanTable>)

Info/EDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'EXTREME-EDP-MIB'   => 'extremeEdpPortIfIndex',

Info/Entity.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'ENTITY-MIB' => 'entPhysicalSerialNum' );
 

Info/EtherLike.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'EtherLike-MIB' => 'etherMIB' );
 

Info/FDP.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' );
 

Info/IEEE802dot11.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( 'IEEE802dot11-MIB' => 'dot11DesiredSSID', );
 

Info/IEEE802dot3ad.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Aggregate;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
   %SNMP::Info::Aggregate::MIBS,

Info/IPv6.pm

@@ -44,7 +44,7 @@ use constant {
     IPV6MIB => 3,
 };
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 
 

Info/LLDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     'LLDP-MIB'          => 'lldpLocSysCapEnabled',
@@ -90,8 +90,12 @@ sub hasLLDP {
     # We may be have LLDP, but nothing in lldpRemoteSystemsData Tables
     # so we could be running LLDP but not return any useful information
     my $lldp_cap = $lldp->lldp_sys_cap();
-
     return 1 if defined $lldp_cap;
+
+    # If the device doesn't return local system capabilities, fallback by checking if it would report neighbors
+    my $lldp_rem = $lldp->lldp_rem_id() || {};
+    return 1 if scalar keys %$lldp_rem;
+
     return;
 }
 
@@ -100,11 +104,11 @@ sub lldp_if {
     my $partial = shift;
 
     my $addr    = $lldp->lldp_rem_pid($partial) || {};
-    my $i_descr = $lldp->i_description() || {};
-    my $i_alias = $lldp->i_alias() || {};
+    my $i_descr = $lldp->i_description()        || {};
+    my $i_alias = $lldp->i_alias()              || {};
     my %r_i_descr = reverse %$i_descr;
     my %r_i_alias = reverse %$i_alias;
-    
+
     my %lldp_if;
     foreach my $key ( keys %$addr ) {
         my @aOID = split( '\.', $key );
@@ -115,14 +119,15 @@ sub lldp_if {
         # prefer ifDescr over ifAlias because using cross ref with description is correct behavior 
         # according to the LLDP-MIB. Some devices (eg H3C gear) seem to use ifAlias though.
         my $lldp_desc = $lldp->lldpLocPortDesc($port);
-        my $desc = $lldp_desc->{$port};
+        my $desc      = $lldp_desc->{$port};
         # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
-        if ( exists $r_i_descr{$desc} ) {
+        if ( $desc && exists $r_i_descr{$desc} ) {
             $port = $r_i_descr{$desc};
-        } elsif ( exists $r_i_alias{$desc} ) {
+        }
+        elsif ( $desc && exists $r_i_alias{$desc} ) {
             $port = $r_i_alias{$desc};
         }
-        
+
         $lldp_if{$key} = $port;
     }
     return \%lldp_if;
@@ -166,12 +171,14 @@ sub lldp_port {
     my $pdesc = $lldp->lldp_rem_desc($partial)     || {};
     my $pid   = $lldp->lldp_rem_pid($partial)      || {};
     my $ptype = $lldp->lldp_rem_pid_type($partial) || {};
+    my $desc  = $lldp->lldp_rem_sysdesc($partial)  || {};
 
     my %lldp_port;
     foreach my $key ( sort keys %$pid ) {
         my $port = $pdesc->{$key};
         my $type = $ptype->{$key};
         if ( $type and $type eq 'interfaceName' ) {
+
             # If the pid claims to be an interface name,
             # believe it.
             $port = $pid->{$key};
@@ -190,8 +197,12 @@ sub lldp_port {
 
         # Avaya/Nortel lldpRemPortDesc doesn't match ifDescr, but we can still
         # figure out slot.port based upon lldpRemPortDesc
-        if ( $port =~ /^(Unit\s+(\d+)\s+)?Port\s+(\d+)$/ ) {
-            $port = defined $1 ? "$2.$3" : "$3";
+        if ( defined $desc->{$key}
+            && $desc->{$key}
+            =~ /^Ethernet\s(?:Routing\s)?Switch\s\d|^Virtual\sServices\sPlatform\s\d/
+            && $port =~ /^(Unit\s+(\d+)\s+)?Port\s+(\d+)$/ )
+        {
+            $port = defined $1 ? "$2.$3" : "1.$3";
         }
 
         $lldp_port{$key} = $port;
@@ -217,10 +228,13 @@ sub lldp_id {
         if ( $type =~ /mac/ ) {
             $id = join( ':', map { sprintf "%02x", $_ } unpack( 'C*', $id ) );
         }
-        elsif ($type eq 'networkAddress') {
-            if ( length(unpack('H*', $id)) == 10 ) {
+        elsif ( $type eq 'networkAddress' ) {
+            if ( length( unpack( 'H*', $id ) ) == 10 ) {
+
                 # IP address (first octet is sign, I guess)
-                my @octets = (map { sprintf "%02x",$_ } unpack('C*', $id))[1..4];
+                my @octets
+                    = ( map { sprintf "%02x", $_ } unpack( 'C*', $id ) )
+                    [ 1 .. 4 ];
                 $id = join '.', map { hex($_) } @octets;
             }
         }
@@ -233,39 +247,43 @@ sub lldp_platform {
     my $lldp    = shift;
     my $partial = shift;
 
-    my $rid  = $lldp->lldp_rem_id($partial) || {};
+    my $rid  = $lldp->lldp_rem_id($partial)      || {};
     my $desc = $lldp->lldp_rem_sysdesc($partial) || {};
     my $name = $lldp->lldp_rem_sysname($partial) || {};
-    
+
     my %lldp_platform;
-    foreach my $key (keys %$rid) {
+    foreach my $key ( keys %$rid ) {
         $lldp_platform{$key} = $desc->{$key} || $name->{$key};
     }
     return \%lldp_platform;
 }
 
 sub lldp_cap {
-    my $lldp     = shift;
+    my $lldp    = shift;
     my $partial = shift;
 
-    my $lldp_caps  = $lldp->lldp_rem_cap_spt($partial)  || {};
-    
+    my $lldp_caps = $lldp->lldp_rem_cap_spt($partial) || {};
+
     # Encoded as BITS which Perl Net-SNMP implementation doesn't seem to
     # be able to enumerate for us, so we have to get it from the MIB
     # and enumerate ourselves
-    my $oid = SNMP::translateObj('lldpRemSysCapEnabled',0,1) || '';
-    my $enums = ((ref {} eq ref $SNMP::MIB{$oid}{'enums'}) ? $SNMP::MIB{$oid}{'enums'} : {});
+    my $oid = SNMP::translateObj( 'lldpRemSysCapEnabled', 0, 1 ) || '';
+    my $enums = (
+        ( ref {} eq ref $SNMP::MIB{$oid}{'enums'} )
+        ? $SNMP::MIB{$oid}{'enums'}
+        : {}
+    );
     my %r_enums = reverse %$enums;
 
     my %lldp_cap;
     foreach my $key ( keys %$lldp_caps ) {
         my $cap_bits = $lldp_caps->{$key};
         next unless $cap_bits;
-        
+
         my $count = 0;
-        foreach my $bit (split //,$cap_bits) {
-            if ( $bit ) {
-                push ( @{$lldp_cap{$key}}, $r_enums{$count});
+        foreach my $bit ( split //, $cap_bits ) {
+            if ($bit) {
+                push( @{ $lldp_cap{$key} }, $r_enums{$count} );
             }
             $count++;
         }
@@ -298,7 +316,7 @@ sub _lldp_addr_index {
     my @oids   = split( /\./, $idx );
     my $index  = join( '.', splice( @oids, 0, 3 ) );
     my $proto  = shift(@oids);
-    my $length = shift(@oids);
+    shift(@oids) if scalar @oids > 4; # $length
 
     # IPv4
     if ( $proto == 1 ) {

Info/Layer1.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( %SNMP::Info::MIBS, 'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex' );
 

Info/Layer1/Allied.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, 'root_ip' => 'actualIPAddr', );

Info/Layer1/Asante.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, );

Info/Layer1/Bayhub.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer1/Cyclades.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer1::MIBS,

Info/Layer1/S3000.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2.pm

@@ -38,18 +38,20 @@ use SNMP::Info;
 use SNMP::Info::Bridge;
 use SNMP::Info::Entity;
 use SNMP::Info::PowerEthernet;
+use SNMP::Info::LLDP;
 
 @SNMP::Info::Layer2::ISA
-    = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::Entity SNMP::Info::PowerEthernet Exporter/;
+    = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::Entity SNMP::Info::PowerEthernet SNMP::Info::LLDP Exporter/;
 @SNMP::Info::Layer2::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,         %SNMP::Info::Bridge::MIBS,
     %SNMP::Info::Entity::MIBS, %SNMP::Info::PowerEthernet::MIBS,
+    %SNMP::Info::LLDP::MIBS,
 );
 
 %GLOBALS = (
@@ -57,6 +59,7 @@ $VERSION = '3.11';
     %SNMP::Info::Bridge::GLOBALS,
     %SNMP::Info::Entity::GLOBALS,
     %SNMP::Info::PowerEthernet::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
     'serial1' =>
         '.1.3.6.1.4.1.9.3.6.3.0',    # OLD-CISCO-CHASSIS-MIB::chassisId.0
 );
@@ -64,6 +67,7 @@ $VERSION = '3.11';
 %FUNCS = (
     %SNMP::Info::FUNCS,         %SNMP::Info::Bridge::FUNCS,
     %SNMP::Info::Entity::FUNCS, %SNMP::Info::PowerEthernet::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
 );
 
 %MUNGE = (
@@ -73,6 +77,7 @@ $VERSION = '3.11';
     %SNMP::Info::Bridge::MUNGE,
     %SNMP::Info::Entity::MUNGE,
     %SNMP::Info::PowerEthernet::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
 );
 
 # Method OverRides
@@ -133,23 +138,6 @@ sub serial {
     return;
 }
 
-sub i_ignore {
-    my $l2      = shift;
-    my $partial = shift;
-
-    my $i_type = $l2->i_type($partial) || {};
-
-    my %i_ignore = ();
-
-    foreach my $if ( keys %$i_type ) {
-        my $type = $i_type->{$if};
-        $i_ignore{$if}++
-            if $type =~ /(loopback|other|cpu)/i;
-    }
-
-    return \%i_ignore;
-}
-
 sub interfaces {
     my $l2      = shift;
     my $partial = shift;
@@ -235,6 +223,8 @@ after determining a more specific class using the method above.
 
 =item SNMP::Info::Entity
 
+=item SNMP::Info::LLDP
+
 =back
 
 =head2 Required MIBs
@@ -288,6 +278,10 @@ See documentation in L<SNMP::Info::Bridge/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -304,12 +298,6 @@ name.
 
 Defaults to C<ifDescr> but checks and overrides with C<ifName>
 
-=item $l2->i_ignore()
-
-Returns reference to hash.  Increments value of IID if port is to be ignored.
-
-Ignores ports with C<ifType> of loopback, propvirtual, other, and cpu
-
 =back
 
 =head2 Table Methods imported from SNMP::Info
@@ -324,4 +312,8 @@ See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =cut

Info/Layer2/3Com.pm

@@ -0,0 +1,173 @@
+package SNMP::Info::Layer2::3Com;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+
+@SNMP::Info::Layer2::3Com::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::3Com::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
+
+$VERSION = '3.22';
+
+%MIBS = (
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::Layer2::MIBS,
+    'A3Com-products-MIB' => 'wlanAP7760',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+
+sub os {
+    return '3Com';
+}
+
+sub serial {
+    my $dev  = shift;
+    my $e_serial = $dev->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
+
+sub os_ver {
+
+    my $dev = shift;
+    my $e_swver  = $dev->e_swver();
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_swver ) {
+        if (defined $e_swver->{$e} and $e_swver->{$e} !~ /^\s*$/) {
+            return $e_swver->{$e};
+        }
+    }
+}
+
+sub vendor {
+    return '3Com';
+}
+
+sub model {
+
+    my $dsmodel = shift;
+    my $descr = $dsmodel->description();
+    if ( $descr =~ /^([\S ]+) Software.*/){
+        return $1;
+    }
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::3Com - SNMP Interface to L2 3Com Switches
+
+=head1 AUTHOR
+
+Max Kosmach
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $router = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $router->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for 3Com L2 devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<A3Com-products-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $device->vendor()
+
+Returns '3Com'
+
+=item $device->os()
+
+Returns '3Com'
+
+=item $device->os_ver()
+
+Return os version
+
+=item $device->model()
+
+Returns device model extracted from description
+
+=item $device->serial()
+
+Returns serial number
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=cut
+

Info/Layer2/Airespace.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,      %SNMP::Info::Bridge::MIBS,

Info/Layer2/Aironet.pm

@@ -49,7 +49,7 @@ use SNMP::Info::IEEE802dot11;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %GLOBALS = (
     %SNMP::Info::IEEE802dot11::GLOBALS,

Info/Layer2/Allied.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );
 

Info/Layer2/Baystack.pm

@@ -46,7 +46,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,    %SNMP::Info::LLDP::MIBS,
@@ -341,6 +341,60 @@ sub peth_port_ifindex {
     return \%peth_port_ifindex;
 }
 
+# Currently only ERS 4800 v5.8+ support the rcBridgeSpbmMacTable 
+# which holds the FDB for a SPBM edge deployment.
+#
+# Q-BRIDGE still holds some entries when the rcBridgeSpbmMacTable is in use
+# so we merge hash entries.
+
+sub fw_mac {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::fw_mac() || {};
+    my $spbm = $rapidcity->rc_spbm_fw_mac() || {};
+    my $fw_mac = { %$qb, %$spbm };
+    
+    return $fw_mac;
+}
+
+sub fw_port {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::fw_port() || {};
+    my $spbm = $rapidcity->rc_spbm_fw_port() || {};
+    my $fw_port = { %$qb, %$spbm };
+    
+    return $fw_port;
+}
+
+sub fw_status {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::fw_status() || {};    
+    my $spbm = $rapidcity->rc_spbm_fw_status() || {};
+    my $fw_status = { %$qb, %$spbm };
+    
+    return $fw_status;
+}
+
+sub qb_fw_vlan {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::qb_fw_vlan() || {};
+    my $spbm = $rapidcity->rc_spbm_fw_vlan() || {};
+    my $qb_fw_vlan = { %$qb, %$spbm };
+    
+    return $qb_fw_vlan;
+}
+
+# Baystack uses S5-AGENT-MIB (loaded in NortelStack) versus RAPID-CITY
+sub stp_ver {
+    my $rapidcity = shift;
+
+    return $rapidcity->s5AgSysSpanningTreeOperMode()
+      || $rapidcity->SUPER::stp_ver();
+}
+
 1;
 
 __END__
@@ -444,6 +498,14 @@ Returns 'baystack' or 'boss' depending on software version.
 
 Returns the firmware version extracted from C<sysDescr>.
 
+=item $baystack->stp_ver()
+
+Returns the particular STP version running on this device.  
+
+Values: C<nortelStpg>, C<pvst>, C<rstp>, C<mstp>, C<ieee8021d>
+
+(C<s5AgSysSpanningTreeOperMode>)
+
 =back
 
 =head2 Overrides
@@ -600,6 +662,32 @@ ns_e_vendor().
 
 =back
 
+=head2 Layer 2 Forwarding Database
+
+These methods try to obtain the layer 2 forwarding database entries via the
+normal bridge methods as well as SPBM entries via rapid city methods.
+
+=over
+
+=item $baystack->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses
+
+=item $baystack->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+=item $baystack->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
+=item $baystack->fw_status()
+
+Returns reference to hash of forwarding table entries status
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::SONMP
 
 See L<SNMP::Info::SONMP/"TABLE METHODS"> for details.

Info/Layer2/C1900.pm

@@ -37,19 +37,23 @@ use Exporter;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
 use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoAgg;
 use SNMP::Info::Layer2;
 
 @SNMP::Info::Layer2::C1900::ISA = qw/SNMP::Info::CDP SNMP::Info::CiscoStats
-    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoStpExtensions SNMP::Info::CiscoAgg SNMP::Info::Layer2
     Exporter/;
 @SNMP::Info::Layer2::C1900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
     %SNMP::Info::CiscoConfig::GLOBALS,
     %SNMP::Info::CiscoStats::GLOBALS,
     %SNMP::Info::CDP::GLOBALS,
@@ -58,6 +62,8 @@ $VERSION = '3.11';
 
 %FUNCS = (
     %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
     %SNMP::Info::CiscoConfig::FUNCS,
     %SNMP::Info::CiscoStats::FUNCS,
     %SNMP::Info::CDP::FUNCS,
@@ -75,6 +81,8 @@ $VERSION = '3.11';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
     %SNMP::Info::CiscoConfig::MIBS,
     %SNMP::Info::CiscoStats::MIBS,
     %SNMP::Info::CDP::MIBS,
@@ -84,8 +92,9 @@ $VERSION = '3.11';
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,             %SNMP::Info::CiscoAgg::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE, %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,         %SNMP::Info::CDP::MUNGE,
 );
 
 sub bulkwalk_no         { return 1; }
@@ -203,7 +212,8 @@ sub i_vlan {
     my $partial = shift;
 
     # Overlap allows more than one VLAN per port.  Unable to determine default
-    my $overlap = $c1900->bridgeGroupAllowMembershipOverlap()
+    my $overlap 
+        = $c1900->bridgeGroupAllowMembershipOverlap()
         || $c1900->vlanAllowMembershipOverlap()
         || 'disabled';
 
@@ -251,6 +261,8 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged { return; }
+
 sub bp_index {
     my $c1900   = shift;
     my $partial = shift;
@@ -258,7 +270,7 @@ sub bp_index {
     my $if_index = $c1900->i_index($partial);
     my $index = $c1900->orig_bp_index($partial) || {};
     foreach my $iid ( keys %$if_index ) {
-        $index->{$iid} = $iid if(!defined $index->{$iid});
+        $index->{$iid} = $iid if ( !defined $index->{$iid} );
     }
     return $index;
 }
@@ -312,6 +324,10 @@ after determining a more specific class using the method above.
 
 =item SNMP::Info::CiscoConfig
 
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::CiscoAgg
+
 =item SNMP::Info::Layer2
 
 =back
@@ -336,6 +352,10 @@ See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
 
 See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
 
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its MIB requirements.
+
 See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
@@ -394,6 +414,14 @@ See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
 See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoAgg
+
+See L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
 See L<SNMP::Info::Layer2/"GLOBALS"> for details.
@@ -444,6 +472,9 @@ bridge group IDs.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $c1900->i_vlan_membership_untagged()
+
+Unsupported, returns nothing.
 
 =item $c1900->bp_index()
 
@@ -513,6 +544,14 @@ See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
 See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/C2900.pm

@@ -34,33 +34,21 @@ package SNMP::Info::Layer2::C2900;
 
 use strict;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::Layer2;
+use SNMP::Info::Layer2::Cisco;
 
-@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig
-    SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::Layer2::Cisco Exporter/;
 @SNMP::Info::Layer2::C2900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS, %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::Cisco::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer2::Cisco::FUNCS,
     'i_name' => 'ifAlias',
 
     # C2900PortEntry
@@ -71,15 +59,12 @@ $VERSION = '3.11';
 );
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS, 'CISCO-C2900-MIB' => 'ciscoC2900MIB',
+    %SNMP::Info::Layer2::Cisco::MIBS,
+    'CISCO-C2900-MIB' => 'ciscoC2900MIB',
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer2::Cisco::MUNGE,
 );
 
 sub vendor {
@@ -269,15 +254,7 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::Layer2
+=item SNMP::Info::Layer2::Cisco
 
 =back
 
@@ -293,15 +270,7 @@ Part of the v2 MIBs from Cisco.
 
 =head2 Inherited MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+See L<SNMP::Info::Layer2::Cisco/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
 
@@ -321,25 +290,9 @@ Returns 1.  Use vlan indexing.
 
 =back
 
-=head2 Globals imported from SNMP::Info::CiscoVTP
+=head2 Globals imported from SNMP::Info::Layer2::Cisco
 
-See L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See L<SNMP::Info::Layer2/"GLOBALS"> for details.
+See L<SNMP::Info::Layer2::Cisco/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -411,25 +364,9 @@ Gives Admin speed of port
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
+=head2 Table Methods imported from SNMP::Info::Layer2::Cisco
 
-See L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+See L<SNMP::Info::Layer2::Cisco/"TABLE METHODS"> for details.
 
 =head1 SET METHODS
 

Info/Layer2/Catalyst.pm

@@ -34,48 +34,34 @@ package SNMP::Info::Layer2::Catalyst;
 use strict;
 use Exporter;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::Layer2;
+use SNMP::Info::Layer2::Cisco;
 
 @SNMP::Info::Layer2::Catalyst::ISA
-    = qw/SNMP::Info::CiscoStack SNMP::Info::CiscoVTP
-    SNMP::Info::CDP SNMP::Info::CiscoStats
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::Layer2 Exporter/;
+    = qw/SNMP::Info::CiscoStack SNMP::Info::Layer2::Cisco Exporter/;
 @SNMP::Info::Layer2::Catalyst::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,   %SNMP::Info::CiscoStack::MIBS,
+    %SNMP::Info::Layer2::Cisco::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::Cisco::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS, %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,   %SNMP::Info::CiscoStack::FUNCS,
+    %SNMP::Info::Layer2::Cisco::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoVTP::MUNGE,   %SNMP::Info::CiscoStack::MUNGE,
+    %SNMP::Info::Layer2::Cisco::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 # Overidden Methods
@@ -228,18 +214,10 @@ after determining a more specific class using the method above.
 
 =over
 
+=item SNMP::Info::Layer2::Cisco
+
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::Layer2
-
 =back
 
 =head2 Required MIBs
@@ -248,19 +226,10 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
+See L<SNMP::Info::Layer2::Cisco/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
-requirements.
-
-See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 These MIBs are found in the standard v2 MIBs from Cisco.
@@ -290,30 +259,14 @@ Returns 1.  Use vlan indexing.
 
 =back
 
+=head2 Global Methods imported from SNMP::Info::Layer2::Cisco
+
+See documentation in L<SNMP::Info::Layer2::Cisco/"GLOBALS"> for details.
+
 =head2 Global Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -348,29 +301,12 @@ have problems with F<BRIDGE-MIB>
 
 =back
 
+=head2 Table Methods imported from SNMP::Info::Layer2::Cisco
+
+See documentation in L<SNMP::Info::Layer2::Cisco/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
 =cut

Info/Layer2/Centillion.pm

@@ -43,7 +43,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -385,11 +385,6 @@ Returns 'Centillion'
 
 =over
 
-=item $centillion->layers()
-
-Returns 00000011.  Class emulates Layer 2 functionality through proprietary
-MIBs.
-
 =item  $centillion->index_factor()
 
 Required by SNMP::Info::SONMP.  Number representing the number of ports

Info/Layer2/Cisco.pm

@@ -35,49 +35,71 @@ use Exporter;
 use SNMP::Info::CiscoVTP;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
 use SNMP::Info::CiscoRTT;
-use SNMP::Info::CiscoQOS;
 use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoAgg;
 use SNMP::Info::Layer2;
 
 @SNMP::Info::Layer2::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    SNMP::Info::CiscoStats SNMP::Info::CiscoRTT
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoStpExtensions SNMP::Info::CiscoAgg
+    SNMP::Info::Layer2
     Exporter/;
 @SNMP::Info::Layer2::Cisco::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoQOS::MIBS,   %SNMP::Info::CiscoRTT::MIBS,
-    %SNMP::Info::CiscoImage::MIBS, %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,        %SNMP::Info::CiscoVTP::MIBS,
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoRTT::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoQOS::GLOBALS,   %SNMP::Info::CiscoRTT::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,        %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoQOS::FUNCS,   %SNMP::Info::CiscoRTT::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS, %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,        %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoRTT::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoQOS::MUNGE,   %SNMP::Info::CiscoRTT::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE, %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,        %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::CiscoAgg::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoRTT::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoVTP::MUNGE,
 );
 
 1;
@@ -85,8 +107,9 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
-that are not covered in other classes.
+SNMP::Info::Layer2::Cisco - SNMP Interface to L2 Cisco devices that are
+not covered in other classes and the base L2 Cisco class for other device
+specific L2 Cisco classes.
 
 =head1 AUTHOR
 
@@ -110,7 +133,8 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Subclass for Generic Cisco Routers running IOS
+Subclass for Generic Layer 2 Cisco devices and the base L2 Cisco class for
+other device specific L2 Cisco classes.
 
 =head2 Inherited Classes
 
@@ -122,14 +146,16 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::CiscoStats
 
-=item SNMP::Info::CiscoImage
-
 =item SNMP::Info::CiscoRTT
 
-=item SNMP::Info::CiscoQOS
-
 =item SNMP::Info::CiscoConfig
 
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::CiscoAgg
+
 =item SNMP::Info::Layer2
 
 =back
@@ -142,18 +168,20 @@ Subclass for Generic Cisco Routers running IOS
 
 See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
 
 =back
@@ -182,22 +210,26 @@ See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoConfig
 
 See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
@@ -219,22 +251,26 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoConfig
 
 See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/CiscoSB.pm

@@ -50,7 +50,7 @@ use SNMP::Info::CDP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # This will be filled in with the device's index into the EntPhysicalEntry
 # table by the serial() function.
@@ -98,21 +98,17 @@ sub vendor {
     return 'cisco';
 }
 
-# Walk the entPhysicalSerialNum table and return both the first serial
-# number found as well as the index of that entry.
+# Walk the entPhysicalSerialNum table and return the first serial found
 sub serial {
     my $ciscosb  = shift;
-    my $serial   = undef;  
     my $e_serial = $ciscosb->e_serial();
 
     # Find entity table entry for this unit
-    foreach my $e ( keys %$e_serial ) {
-        if (defined ($e_serial->{$e}) and $e_serial->{$e} !~ /^\s*$/) {
-            $index = $e;
-            last;
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
         }
     }
-    return $e_serial->{$index} if defined $index;
 }
 
 sub os_ver {

Info/Layer2/HP.pm

@@ -36,23 +36,27 @@ use strict;
 use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
-use SNMP::Info::LLDP;
 use SNMP::Info::CDP;
+use SNMP::Info::Aggregate;
 
-@SNMP::Info::Layer2::HP::ISA
-    = qw/SNMP::Info::Layer3 SNMP::Info::MAU SNMP::Info::LLDP
-    SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::HP::ISA = qw/
+    SNMP::Info::Aggregate
+    SNMP::Info::Layer3 
+    SNMP::Info::MAU 
+    SNMP::Info::CDP 
+    Exporter
+/;
 @SNMP::Info::Layer2::HP::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
-    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::Aggregate::MIBS,
     'RFC1271-MIB'    => 'logDescription',
     'HP-ICF-OID'     => 'hpSwitch4000',
     'STATISTICS-MIB' => 'hpSwitchCpuStat',
@@ -67,8 +71,8 @@ $VERSION = '3.11';
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
     %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::Aggregate::GLOBALS,
     'serial1'      => 'entPhysicalSerialNum.1',
     'serial2'      => 'hpHttpMgSerialNumber.0',
     'hp_cpu'       => 'hpSwitchCpuStat.0',
@@ -85,8 +89,8 @@ $VERSION = '3.11';
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS,
     %SNMP::Info::MAU::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::Aggregate::FUNCS,
     'i_type2'   => 'ifType',
 
     # RFC1271
@@ -110,8 +114,8 @@ $VERSION = '3.11';
     # Inherit all the built in munging
     %SNMP::Info::Layer3::MUNGE,
     %SNMP::Info::MAU::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::Aggregate::MUNGE,
     'c_id'   => \&munge_hp_c_id,
 );
 
@@ -524,6 +528,8 @@ sub set_i_vlan_tagged {
     return;
 }
 
+sub agg_ports { return agg_ports_ifstack(@_) }
+
 1;
 __END__
 
@@ -570,8 +576,6 @@ after determining a more specific class using the method above.
 
 =item SNMP::Info::Layer2
 
-=item SNMP::Info::LLDP
-
 =item SNMP::Info::MAU
 
 =back
@@ -797,10 +801,6 @@ Returns what version of STP the device is running.
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
@@ -812,7 +812,7 @@ to a hash.
 
 =head2 Overrides
 
-=over
+=over 4
 
 =item $hp->interfaces() 
 
@@ -840,16 +840,18 @@ Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()
 Returns reference to hash of power Ethernet port table entries map back to
 interface index (c<ifIndex>)
 
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.

Info/Layer2/HP4000.pm

@@ -44,7 +44,7 @@ use SNMP::Info::CDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -376,6 +376,20 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $hp  = shift;
+    my $partial = shift;
+
+    my $vlans = $hp->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    
+    return $i_vlan_membership;
+}
+
 sub set_i_vlan {
     my $hp = shift;
     my $rv;
@@ -680,6 +694,12 @@ It is the union of tagged, untagged, and auto ports.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $hp->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $hp->v_index()
 
 Returns VLAN IDs

Info/Layer2/HPVC.pm

@@ -33,17 +33,19 @@ package SNMP::Info::Layer2::HPVC;
 use strict;
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::LLDP;
 
 @SNMP::Info::Layer2::HPVC::ISA
-    = qw/SNMP::Info::Layer2 Exporter/;
+    = qw/SNMP::Info::Layer2 SNMP::Info::LLDP Exporter/;
 @SNMP::Info::Layer2::HPVC::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     'HPVC-MIB'       => 'vcDomainName',
     'CPQSINFO-MIB'   => 'cpqSiSysSerialNum',
     'HPVCMODULE-MIB' => 'vcModuleDomainName',
@@ -51,6 +53,7 @@ $VERSION = '3.11';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
     'serial1'      => 'cpqSiSysSerialNum.0',
     'os_ver'       => 'cpqHoSWRunningVersion.1',
     'os_bin'       => 'cpqHoFwVerVersion.1',
@@ -59,12 +62,14 @@ $VERSION = '3.11';
 
 %FUNCS = (
     %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
     
 );
 
 %MUNGE = (
     # Inherit all the built in munging
     %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
 );
 
 

Info/Layer2/Kentrox.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/N2270.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,        %SNMP::Info::Bridge::MIBS,

Info/Layer2/NAP222x.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::IEEE802dot11::MIBS,

Info/Layer2/NWSS2300.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Bridge;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,

Info/Layer2/Netgear.pm

@@ -33,32 +33,31 @@ package SNMP::Info::Layer2::Netgear;
 use strict;
 use Exporter;
 use SNMP::Info::Layer2;
-use SNMP::Info::Entity;
 use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Entity SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::Netgear::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # This will be filled in with the device's index into the EntPhysicalEntry
 # table by the serial() function.
 our $index = undef;
 
-%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::Entity::MIBS, %SNMP::Info::LLDP::MIBS, );
+%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::LLDP::MIBS, );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::Entity::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
     ng_fsosver   => '.1.3.6.1.4.1.4526.11.11.1.0',
     ng_gsmserial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
     ng_gsmosver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
 );
 
-%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::Entity::FUNCS, %SNMP::Info::LLDP::FUNCS, );
+%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::LLDP::FUNCS, );
 
-%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::Entity::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::LLDP::MUNGE, );
 
 sub vendor {
     return 'netgear';
@@ -153,133 +152,6 @@ sub os_ver {
     return $netgear->ng_fsosver() if defined  $netgear->model and $netgear->model =~ m/FS\d/i;
 }
 
-#  Use LLDP
-
-sub hasCDP {
-    my $netgear = shift;
-    return $netgear->hasLLDP() || $netgear->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $netgear = shift;
-    my $partial = shift;
-
-    my $cdp  = $netgear->SUPER::c_ip($partial) || {};
-    my $lldp = $netgear->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    my $lldp = $netgear->lldp_if($partial)     || {};
-    my $cdp  = $netgear->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    my $lldp = $netgear->lldp_port($partial)     || {};
-    my $cdp  = $netgear->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    my $lldp = $netgear->lldp_id($partial)     || {};
-    my $cdp  = $netgear->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    my $lldp = $netgear->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $netgear->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
 1;
 
 __END__
@@ -399,49 +271,6 @@ Uses the i_name() field.
 
 =back
 
-=head2 Topology information
-
-Based upon the software version devices may support Link Layer Discovery 
-Protocol (LLDP).
-
-=over
-
-=item $netgear->hasCDP()
-
-Returns true if the device is running LLDP.
-
-=item $netgear->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $netgear->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-LLDP device in between two or
-more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $netgear->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $netgear->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $netgear->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/Orinoco.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/Trapeze.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,

Info/Layer2/Ubiquiti.pm

@@ -0,0 +1,177 @@
+# SNMP::Info::Layer2::Ubiquiti
+# $Id$
+#
+
+package SNMP::Info::Layer2::Ubiquiti;
+
+use strict;
+use Exporter;
+use SNMP::Info::IEEE802dot11;
+use SNMP::Info::Layer2;
+
+@SNMP::Info::Layer2::Ubiquiti::ISA
+    = qw/SNMP::Info::IEEE802dot11 SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Ubiquiti::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.22';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::IEEE802dot11::MIBS,
+
+);
+
+%GLOBALS
+    = ( %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::IEEE802dot11::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
+
+);
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::IEEE802dot11::MUNGE, );
+
+sub os {
+    return 'Ubiquiti';
+}
+
+sub os_ver {
+    my $dot11 = shift;
+
+    my $versions = $dot11->dot11_prod_ver();
+
+    foreach my $iid ( keys %$versions ) {
+        my $ver = $versions->{$iid};
+        next unless defined $ver;
+	return $ver;
+        if ( $ver =~ /([\d\.]+)/ ) {
+            return $1;
+        }
+    }
+
+    return;
+}
+
+sub vendor {
+    return 'Ubiquiti Networks, Inc.';
+}
+
+sub model {
+    my $dot11 = shift;
+
+    my $names = $dot11->dot11_prod_name();
+
+    foreach my $iid ( keys %$names ) {
+        my $prod = $names->{$iid};
+        next unless defined $prod;
+        return $prod;
+    }
+    return;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::Ubiquiti - SNMP Interface to Ubiquiti Access Points
+
+=head1 AUTHOR
+
+Max Kosmach
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ubnt = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $ubnt->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from
+Ubiquiti Access Point through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $ubnt = new SNMP::Info::Layer2::Ubiquiti(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=item SNMP::Info::IEEE802dot11
+
+=back
+
+=head2 Required MIBs
+
+None.
+
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ubnt->vendor()
+
+Returns 'Ubiquiti Networks, Inc.'
+
+=item $ubnt->model()
+
+Returns the model extracted from C<dot11manufacturerProductName>.
+
+=item $ubnt->os()
+
+Returns 'Ubiquiti'
+
+=item $ubnt->os_ver()
+
+Returns the software version extracted from C<dot11manufacturerProductVersion>.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/ZyXEL_DSLAM.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );

Info/Layer3.pm

@@ -41,17 +41,19 @@ use SNMP::Info::Entity;
 use SNMP::Info::PowerEthernet;
 use SNMP::Info::IPv6;
 use SNMP::Info::AdslLine;
+use SNMP::Info::LLDP;
 
 @SNMP::Info::Layer3::ISA = qw/
     SNMP::Info::PowerEthernet SNMP::Info::IPv6
     SNMP::Info::Entity SNMP::Info::EtherLike
     SNMP::Info::Bridge SNMP::Info::AdslLine
+    SNMP::Info::LLDP
     SNMP::Info Exporter/;
 @SNMP::Info::Layer3::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -61,6 +63,7 @@ $VERSION = '3.11';
     %SNMP::Info::Entity::MIBS,
     %SNMP::Info::PowerEthernet::MIBS,
     %SNMP::Info::IPv6::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     'IP-MIB'   => 'ipNetToMediaIfIndex',
     'OSPF-MIB' => 'ospfRouterId',
     'BGP4-MIB' => 'bgpIdentifier',
@@ -76,6 +79,7 @@ $VERSION = '3.11';
     %SNMP::Info::Entity::GLOBALS,
     %SNMP::Info::PowerEthernet::GLOBALS,
     %SNMP::Info::IPv6::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
     'mac' => 'ifPhysAddress.1',
     'serial1' =>
         '.1.3.6.1.4.1.9.3.6.3.0',    # OLD-CISCO-CHASSIS-MIB::chassisId.0
@@ -92,6 +96,7 @@ $VERSION = '3.11';
     %SNMP::Info::Entity::FUNCS,
     %SNMP::Info::PowerEthernet::FUNCS,
     %SNMP::Info::IPv6::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
 
     # Obsolete Address Translation Table (ARP Cache)
     'old_at_index'   => 'atIfIndex',
@@ -150,6 +155,7 @@ $VERSION = '3.11';
     %SNMP::Info::Entity::MUNGE,
     %SNMP::Info::PowerEthernet::MUNGE,
     %SNMP::Info::IPv6::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
     'old_at_paddr' => \&SNMP::Info::munge_mac,
     'at_paddr'     => \&SNMP::Info::munge_mac,
     'n2p_paddr'    => \&SNMP::Info::munge_mac,
@@ -185,23 +191,6 @@ sub root_ip {
     return;
 }
 
-sub i_ignore {
-    my $l3      = shift;
-    my $partial = shift;
-
-    my $interfaces = $l3->interfaces($partial) || {};
-
-    my %i_ignore;
-    foreach my $if ( keys %$interfaces ) {
-
-        # lo -> cisco aironet 350 loopback
-        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|null)/i ) {
-            $i_ignore{$if}++;
-        }
-    }
-    return \%i_ignore;
-}
-
 sub serial {
     my $l3 = shift;
 
@@ -427,6 +416,8 @@ after determining a more specific class using the method above.
 
 =item SNMP::Info::IPv6
 
+=item SNMP::Info::LLDP
+
 =back
 
 =head2 Required MIBs
@@ -455,6 +446,8 @@ See L<SNMP::Info::PowerEthernet/"Required MIBs"> for its MIB requirements.
 
 See L<SNMP::Info::IPv6/"Required MIBs"> for its MIB requirements.
 
+See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -528,6 +521,18 @@ See L<SNMP::Info::EtherLike/"GLOBALS"> for details.
 
 See L<SNMP::Info::Entity/"GLOBALS"> for details.
 
+=head2 Global Methods imported from SNMP::Info:PowerEthernet
+
+See L<SNMP::Info::PowerEthernet/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::IPv6
+
+See L<SNMP::Info::IPv6/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::LLDP
+
+See L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -544,12 +549,6 @@ name.
 
 Only returns those iids that have a description listed in $l3->i_description()
 
-=item $l3->i_ignore()
-
-Returns reference to hash.  Creates a key for each IID that should be ignored.
-
-Currently looks for tunnel,loopback,lo,null from $l3->interfaces()
-
 =item $l3->i_name()
 
 Returns reference to hash of iid to human set name. 
@@ -803,4 +802,8 @@ See L<SNMP::Info::PowerEthernet/"TABLE METHODS"> for details.
 
 See L<SNMP::Info::IPv6/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =cut

Info/Layer3/Aironet.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/AlcatelLucent.pm

@@ -49,7 +49,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/AlteonAD.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -385,6 +385,20 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $alteon  = shift;
+    my $partial = shift;
+
+    my $vlans = $alteon->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    
+    return $i_vlan_membership;
+}
+
 # Bridge MIB does not map Bridge Port to ifIndex correctly on some code
 # versions
 sub bp_index {
@@ -574,6 +588,12 @@ IDs.  These are the VLANs which are members of the egress list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $alteon->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $alteon->v_index()
 
 Returns VLAN IDs

Info/Layer3/Altiga.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3;
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE 
             $int_include_vpn $fake_idx $type_class/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
             %SNMP::Info::Layer3::MIBS,

Info/Layer3/Arista.pm

@@ -48,7 +48,7 @@ use SNMP::Info::Aggregate;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Aruba.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -124,6 +124,8 @@ $VERSION = '3.11';
     'aruba_ap_model'  => 'wlanAPModelName',
     'aruba_ap_name'   => 'wlanAPName',
     'aruba_ap_ip'     => 'wlanAPIpAddress',
+    'aruba_ap_hw_ver' => 'wlanAPHwVersion',
+    'aruba_ap_sw_ver' => 'wlanAPSwVersion',
 
     # WLSX-WLAN-MIB::wlsxWlanESSIDVlanPoolTable
     'aruba_ssid_vlan' => 'wlanESSIDVlanPoolStatus',
@@ -484,6 +486,7 @@ sub i_vlan {
 	return $aruba->SUPER::i_vlan($partial)
 		if keys %{ $aruba->SUPER::i_vlan($partial) };
 
+	# If we don't have Q-BRIDGE-MIB, we're a wireless controller
 	my $index = $aruba->aruba_if_idx();
 
 	if ($partial) {
@@ -512,6 +515,7 @@ sub i_vlan_membership {
 	return $aruba->SUPER::i_vlan_membership($partial)
 		if keys %{ $aruba->SUPER::i_vlan_membership($partial) };
 
+	# If we don't have Q-BRIDGE-MIB, we're a wireless controller
 	my $essid_ssid = $aruba->aruba_ap_bssid_ssid();
 	my $ssid_vlans = $aruba->aruba_ssid_vlan();
 	my $if_vlans   = $aruba->aruba_if_vlan_member();
@@ -555,6 +559,32 @@ sub i_vlan_membership {
 	return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+	my $aruba   = shift;
+	my $partial = shift;
+
+	return $aruba->SUPER::i_vlan_membership_untagged($partial)
+		if keys %{ $aruba->SUPER::i_vlan_membership_untagged($partial) };
+
+	# If we don't have Q-BRIDGE-MIB, we're a wireless controller
+	# It is unclear if native VLAN is transmitted untagged
+	# This assumes Cisco-like behavior on trunks that native VLAN is
+	# transmitted untagged, if this needs to be changed we will need to
+	# consider ifExtMode rather than just using i_vlan
+	my $if_membership = $aruba->i_vlan_membership();
+	my $if_ = $aruba->i_vlan();
+	my $if_mode   = $aruba->aruba_if_mode();
+
+    my $vlans = $aruba->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+
+    return $i_vlan_membership;
+}
+
 sub i_80211channel {
     my $aruba   = shift;
     my $partial = shift;
@@ -995,8 +1025,9 @@ sub e_type {
 sub e_hwver {
     my $aruba = shift;
 
-    my $ap_hw   = $aruba->aruba_card_hw()   || {};
-    my $ap_fpga = $aruba->aruba_card_fpga() || {};
+    my $ap_hw     = $aruba->aruba_card_hw()   || {};
+    my $ap_fpga   = $aruba->aruba_card_fpga() || {};
+    my $ap_hw_ver = $aruba->aruba_ap_hw_ver() || {};
 
     my %e_hwver;
 
@@ -1008,9 +1039,36 @@ sub e_hwver {
 
 	$e_hwver{$iid} = "$hw $fpga";
     }
+
+    # APs
+    foreach my $idx ( keys %$ap_hw_ver ) {
+	my $hw_ver = $ap_hw_ver->{$idx};
+	next unless defined $hw_ver;
+
+	$e_hwver{$idx} = "$hw_ver";
+    }
+
     return \%e_hwver;
 }
 
+sub e_swver {
+    my $aruba = shift;
+
+    my $ap_sw_ver = $aruba->aruba_ap_hw_ver() || {};
+
+    my %e_swver;
+
+    # APs
+    foreach my $idx ( keys %$ap_sw_ver ) {
+	my $sw_ver = $ap_sw_ver->{$idx};
+	next unless defined $sw_ver;
+
+	$e_swver{$idx} = "$sw_ver";
+    }
+
+    return \%e_swver;
+}
+
 sub e_vendor {
     my $aruba = shift;
 
@@ -1586,6 +1644,12 @@ Returns reference to map of IIDs to VLAN ID of the interface.
 Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
 IDs.  These are the VLANs for which the port is a member.
 
+=item $aruba->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $aruba->bp_index()
 
 Augments the bridge MIB by returning reference to a hash containing the
@@ -1648,6 +1712,10 @@ Returns reference to hash.  Key: IID, Value: Type of component.
 
 Returns reference to hash.  Key: IID, Value: Hardware revision.
 
+=item $aruba->e_swver()
+
+Returns reference to hash.  Key: IID, Value: Software revision.
+
 =item $aruba->e_vendor()
 
 Returns reference to hash.  Key: IID, Value: aruba.

Info/Layer3/BayRS.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Bridge;
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE %MODEL_MAP
     %MODID_MAP %PROCID_MAP/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -732,6 +732,8 @@ sub i_vlan {
     return \%i_vlan;
 }
 
+sub i_pvid { goto &i_vlan }
+
 sub root_ip {
     my $bayrs = shift;
 
@@ -1549,6 +1551,10 @@ interfaces.
 
 Returns reference to hash.  Maps port VLAN ID to IIDs.
 
+=item $bayrs->i_pvid()
+
+Returns reference to hash.  Maps port VLAN ID to IIDs.
+
 =back
 
 =head2 Pseudo F<ENTITY-MIB> information

Info/Layer3/BlueCoatSG.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,

Info/Layer3/C3550.pm

@@ -32,39 +32,22 @@
 package SNMP::Info::Layer3::C3550;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::Layer3::CiscoSwitch;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::C3550::ISA = qw/
-    SNMP::Info::CiscoVTP
-    SNMP::Info::CiscoStpExtensions
     SNMP::Info::CiscoStack
-    SNMP::Info::LLDP
-    SNMP::Info::CDP
-    SNMP::Info::CiscoStats
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
+    SNMP::Info::Layer3::CiscoSwitch
     Exporter/;
 
 @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -72,46 +55,23 @@ $VERSION = '3.11';
 #       So we want CiscoVTP to come last to get the right one.
 # The @ISA order should match these orders.
 
-%MIBS = (
-    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::LLDP::MIBS,               %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,
-);
-
+%MIBS
+    = ( %SNMP::Info::Layer3::CiscoSwitch::MIBS, %SNMP::Info::CiscoStack::MIBS,
+    );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,               %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,               %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer3::CiscoSwitch::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 sub vendor {
@@ -232,10 +192,6 @@ sub set_i_duplex_admin {
     }
 }
 
-sub cisco_comm_indexing {
-    return 1;
-}
-
 1;
 __END__
 
@@ -281,25 +237,9 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoSTPExtensions
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoVTP
-
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CDP
-
-=item SNMP::Info::LLDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =back
 
@@ -309,26 +249,10 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
-requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
+requirements.
 
 =back
 
@@ -353,51 +277,15 @@ Will take the translated model number and try to format it better.
 
 Tries to cull the number of ports from the model number.
 
-=item $c3550->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStack
+=head2 Globals imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -444,45 +332,13 @@ Crosses $c3550->p_port() with $c3550->p_duplex() to utilize port C<ifIndex>.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
+details.
 
 =cut

Info/Layer3/C4000.pm

@@ -31,48 +31,30 @@
 package SNMP::Info::Layer3::C4000;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
+use SNMP::Info::Layer3::CiscoSwitch;
 use SNMP::Info::MAU;
-use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::C4000::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::C4000::ISA = qw/
+    SNMP::Info::Layer3::CiscoSwitch
+    SNMP::Info::MAU
+    Exporter/;
 @SNMP::Info::Layer3::C4000::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,
+    %SNMP::Info::Layer3::CiscoSwitch::MIBS,
     'CISCO-ENVMON-MIB' => 'ciscoEnvMonMIB',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     'ps1_type'   => 'ciscoEnvMonSupplyStatusDescr.1',
     'ps1_status' => 'ciscoEnvMonSupplyState.1',
     'ps2_type'   => 'ciscoEnvMonSupplyStatusDescr.2',
@@ -80,24 +62,14 @@ $VERSION = '3.11';
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,
     %SNMP::Info::MAU::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
     'fan_state' => 'ciscoEnvMonFanState',
     'fan_descr' => 'ciscoEnvMonFanStatusDescr',
 );
 
-%MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,      %SNMP::Info::MAU::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE, %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,  %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,         %SNMP::Info::CiscoVTP::MUNGE,
-);
+%MUNGE
+    = ( %SNMP::Info::MAU::MUNGE, %SNMP::Info::Layer3::CiscoSwitch::MUNGE, );
 
 # Override Inheritance for these specific methods
 # use MAU-MIB for admin. duplex and admin. speed
@@ -111,7 +83,6 @@ $VERSION = '3.11';
 *SNMP::Info::Layer3::C4000::set_i_speed_admin
     = \&SNMP::Info::MAU::mau_set_i_speed_admin;
 
-
 sub fan {
     my $c4000     = shift;
     my $fan_state = $c4000->fan_state();
@@ -126,8 +97,6 @@ sub fan {
     return $ret;
 }
 
-sub cisco_comm_indexing { return 1; }
-
 1;
 __END__
 
@@ -169,22 +138,10 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =item SNMP::Info::MAU
 
-=item SNMP::Info::Layer3
-
 =back
 
 =head2 Required MIBs
@@ -193,23 +150,11 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 =head1 GLOBALS
@@ -220,48 +165,20 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $c4000->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =item $c4000->fan()
 
 Returns fan status
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -301,37 +218,13 @@ Duplex choices are 'auto', 'half', 'full'.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
 =cut

Info/Layer3/C6500.pm

@@ -31,37 +31,18 @@
 package SNMP::Info::Layer3::C6500;
 
 use strict;
+use warnings;
 use Exporter;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CiscoAgg;
+use SNMP::Info::Layer3::CiscoSwitch;
 use SNMP::Info::MAU;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::C6500::ISA = qw/
-    SNMP::Info::CiscoAgg
-    SNMP::Info::CiscoVTP 
-    SNMP::Info::CiscoStpExtensions
     SNMP::Info::CiscoStack
-    SNMP::Info::LLDP
-    SNMP::Info::CDP 
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoStats
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
+    SNMP::Info::Layer3::CiscoSwitch
     SNMP::Info::MAU
     Exporter
 /;
@@ -70,7 +51,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -80,59 +61,49 @@ $VERSION = '3.11';
 
 %MIBS = (
     %SNMP::Info::MAU::MIBS,
-    %SNMP::Info::Layer3::MIBS,
-    %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::Layer3::CiscoSwitch::MIBS,
     %SNMP::Info::CiscoStack::MIBS,
-    %SNMP::Info::CiscoStpExtensions::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,
-    %SNMP::Info::CiscoAgg::MIBS,
     'CISCO-VIRTUAL-SWITCH-MIB' => 'cvsSwitchMode',
 );
 
 %GLOBALS = (
     %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::MAU::FUNCS,                %SNMP::Info::Layer3::FUNCS,
-    %SNMP::Info::CiscoPower::FUNCS,         %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,  %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,         %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,               %SNMP::Info::CiscoStack::FUNCS,
-    %SNMP::Info::CiscoStpExtensions::FUNCS, %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::MAU::MUNGE,                %SNMP::Info::Layer3::MUNGE,
-    %SNMP::Info::CiscoPower::MUNGE,         %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoPortSecurity::MUNGE,  %SNMP::Info::CiscoImage::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE,         %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,               %SNMP::Info::CiscoStack::MUNGE,
-    %SNMP::Info::CiscoStpExtensions::MUNGE, %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::Layer3::CiscoSwitch::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 sub vendor {
     return 'cisco';
 }
 
-sub cisco_comm_indexing { return 1; }
+sub serial {
+    my $c6500 = shift;
+
+    my $serial = $c6500->SUPER::serial();
+    return $serial if defined $serial and $serial;
+
+    # now grab the table only if SUPER cannot find it
+    my $e_serial = $c6500->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
 
 #  Newer versions use the ETHERLIKE-MIB to report operational duplex.
 
@@ -312,27 +283,11 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoAgg
-
-=item SNMP::Info::CiscoVTP
-
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CDP
+=item SNMP::Info::Layer3::CiscoSwitch
 
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoStpExtensions
+=item SNMP::Info::MAU
 
 =back
 
@@ -342,28 +297,12 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -377,10 +316,6 @@ These are methods that return scalar value from SNMP
 
     Returns 'cisco'
 
-=item $c6500->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =item $c6500->cvsSwitchMode()
 
 Returns the Switch status: multiNode or standalone.
@@ -389,47 +324,23 @@ Returns the Switch status: multiNode or standalone.
 
 Return 1 if the switch (C<cvsSwitchMode>) is in multimode (VSS).
 
+=item $c6500->serial()
+
+Returns serial number of unit (falls back to C<entPhysicalSerialNum>).
+
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStack
+=head2 Globals imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoStats
+=head2 Globals imported from SNMP::Info::MAU
 
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -484,47 +395,19 @@ Crosses $c6500->p_port() with $c6500->p_speed() to utilize port C<ifIndex>.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
 
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
 
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+=head2 Table Methods imported from SNMP::Info::MAU
 
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
 =cut
-

Info/Layer3/Cisco.pm

@@ -31,59 +31,70 @@
 package SNMP::Info::Layer3::Cisco;
 
 use strict;
+use warnings;
 use Exporter;
 use SNMP::Info::CiscoVTP;
+use SNMP::Info::LLDP;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
 use SNMP::Info::CiscoRTT;
 use SNMP::Info::CiscoQOS;
 use SNMP::Info::CiscoConfig;
 use SNMP::Info::CiscoPower;
+use SNMP::Info::CiscoStpExtensions;
 use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
+@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP
+    SNMP::Info::LLDP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoRTT
+    SNMP::Info::CiscoQOS SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower SNMP::Info::CiscoStpExtensions
     SNMP::Info::Layer3
     Exporter/;
 @SNMP::Info::Layer3::Cisco::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
     %SNMP::Info::CiscoPower::MIBS,
     %SNMP::Info::CiscoConfig::MIBS,
     %SNMP::Info::CiscoQOS::MIBS,
     %SNMP::Info::CiscoRTT::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
     %SNMP::Info::CiscoStats::MIBS,
     %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::CiscoVTP::MIBS,
     'CISCO-EIGRP-MIB' => 'cEigrpAsRouterId',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,      %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS, %SNMP::Info::CiscoQOS::GLOBALS,
-    %SNMP::Info::CiscoRTT::GLOBALS,    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,  %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS, 'eigrp_id' => 'cEigrpAsRouterId',
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoQOS::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    'eigrp_id' => 'cEigrpAsRouterId',
 );
 
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
     %SNMP::Info::CiscoPower::FUNCS,
     %SNMP::Info::CiscoConfig::FUNCS,
     %SNMP::Info::CiscoQOS::FUNCS,
     %SNMP::Info::CiscoRTT::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
     %SNMP::Info::CiscoStats::FUNCS,
     %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::CiscoVTP::FUNCS,
 
     # EIGRP
@@ -92,33 +103,37 @@ $VERSION = '3.11';
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE,
     %SNMP::Info::CiscoPower::MUNGE,
     %SNMP::Info::CiscoConfig::MUNGE,
     %SNMP::Info::CiscoQOS::MUNGE,
     %SNMP::Info::CiscoRTT::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,
     %SNMP::Info::CiscoStats::MUNGE,
     %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::CiscoVTP::MUNGE,
     'eigrp_peers' => \&SNMP::Info::munge_ip,
 );
 
 sub i_vlan {
-    my ($cisco)   = shift;
-    my ($partial) = shift;
+    my $cisco   = shift;
+    my $partial = shift;
 
-    my ($i_type)  = $cisco->i_type($partial);
-    my ($i_descr) = $cisco->i_description($partial);
-    my %i_vlan;
+    my $i_type  = $cisco->i_type($partial);
+    my $i_descr = $cisco->i_description($partial);
+    my $i_vlan  = $cisco->SUPER::i_vlan($partial);
 
     foreach my $idx ( keys %$i_descr ) {
-        if ( $i_type->{$idx} eq 'l2vlan' || $i_type->{$idx} eq 135 ) {
+        next unless $i_type->{$idx};
+        if (   $i_type->{$idx} eq 'l2vlan'
+            || $i_type->{$idx} eq '135' && !defined $i_vlan->{$idx} )
+        {
             if ( $i_descr->{$idx} =~ /\.(\d+)$/ ) {
-                $i_vlan{$idx} = $1;
+                $i_vlan->{$idx} = $1;
             }
         }
     }
-    return \%i_vlan;
+    return $i_vlan;
 }
 
 1;
@@ -127,7 +142,9 @@ __END__
 =head1 NAME
 
 SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
-that are not covered in other classes.
+that are not covered in other classes and the base L3 Cisco class for other
+device specific L3 Cisco classes.
+
 
 =head1 AUTHOR
 
@@ -151,7 +168,8 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Subclass for Generic Cisco Routers running IOS
+Subclass for Generic Cisco Routers running IOS and the base L3 Cisco class
+for other device specific L3 Cisco classes.
 
 =head2 Inherited Classes
 
@@ -159,12 +177,12 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::CiscoVTP
 
+=item SNMP::Info::LLDP
+
 =item SNMP::Info::CDP
 
 =item SNMP::Info::CiscoStats
 
-=item SNMP::Info::CiscoImage
-
 =item SNMP::Info::CiscoRTT
 
 =item SNMP::Info::CiscoQOS
@@ -173,6 +191,8 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::Power
 
+=item SNMP::Info::CiscoStpExtensions
+
 =item SNMP::Info::Layer3
 
 =back
@@ -187,12 +207,12 @@ Subclass for Generic Cisco Routers running IOS
 
 See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
@@ -201,6 +221,8 @@ See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
@@ -211,10 +233,6 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $cisco->vendor()
-
-    Returns 'cisco'
-
 =item $cisco->eigrp_id()
 
 (C<cEigrpAsRouterId>)
@@ -225,6 +243,10 @@ These are methods that return scalar value from SNMP
 
 See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::CDP
 
 See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
@@ -233,10 +255,6 @@ See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
@@ -253,6 +271,10 @@ See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
@@ -280,6 +302,10 @@ Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
 See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CDP
 
 See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
@@ -288,10 +314,6 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
@@ -308,6 +330,10 @@ See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/CiscoASA.pm

@@ -32,68 +32,61 @@
 package SNMP::Info::Layer3::CiscoASA;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoRTT;
-use SNMP::Info::CiscoQOS;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
 use SNMP::Info::Layer3;
-use SNMP::Info::Layer3::Cisco;
 
-@SNMP::Info::Layer3::CiscoASA::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
-    SNMP::Info::Layer3::Cisco
+@SNMP::Info::Layer3::CiscoASA::ISA = qw/
+    SNMP::Info::CiscoStats
     SNMP::Info::Layer3
     Exporter/;
 @SNMP::Info::Layer3::CiscoASA::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
-%MIBS = (
-       %SNMP::Info::Layer3::Cisco::MIBS,
-);
+%MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStats::MIBS, );
 
-%GLOBALS = (
-       %SNMP::Info::Layer3::Cisco::GLOBALS,
-);
+%GLOBALS
+    = ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS, );
 
 %FUNCS = (
-       %SNMP::Info::Layer3::Cisco::FUNCS,
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
     'mac_table' => 'ifPhysAddress',
 );
 
 %MUNGE = (
-       %SNMP::Info::Layer3::Cisco::MUNGE,
-    'mac_table'  => \&SNMP::Info::munge_mac, );
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    'mac_table' => \&SNMP::Info::munge_mac,
+);
 
 sub b_mac {
-       my ($asa) = shift;
-       my $macs = $asa->mac_table();
-       my @macs;
-       # gather physical addresses
-       foreach my $i ( keys %$macs ) {
-               my $mac = $macs->{$i};
-               # don't catch the bad macs with zeroed OUI
-               if ( $mac !~ m/(0{1,2}:){3}/ ) {
-                       push( @macs, $mac);
-               }
-               @macs = sort( @macs );
-       }
-       # return the least mac
-       return $macs[0];
+    my ($asa) = shift;
+    my $macs = $asa->mac_table();
+    my @macs;
+
+    # gather physical addresses
+    foreach my $i ( keys %$macs ) {
+        my $mac = $macs->{$i};
+
+        # don't catch the bad macs with zeroed OUI
+        if ( $mac !~ m/(0{1,2}:){3}/ ) {
+            push( @macs, $mac );
+        }
+        @macs = sort(@macs);
+    }
+
+    # return the least mac
+    return $macs[0];
 }
 
 sub i_description {
-    my $self = shift;
-    my $partial   = shift;
+    my $self    = shift;
+    my $partial = shift;
 
     my $i_descr = $self->orig_i_description($partial) || {};
 
@@ -141,7 +134,9 @@ Subclass for Cisco ASA Devices
 
 =over
 
-=item SNMP::Info::Layer3::Cisco
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::Layer3
 
 =back
 
@@ -149,11 +144,11 @@ Subclass for Cisco ASA Devices
 
 =over
 
-=item F<CISCO-EIGRP-MIB>
-
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -176,77 +171,25 @@ configured interface name instead of "Adaptive Security Appliance
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoStats
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoRTT
-
-See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer3
+=head2 Global Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Layer3::Cisco
-
-See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a
 reference to a hash.
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStats
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
+=head2 Table Methods imported from SNMP::Info::Layer3
 
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoRTT
-
-See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
-
-See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/CiscoFWSM.pm

@@ -31,34 +31,31 @@
 package SNMP::Info::Layer3::CiscoFWSM;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::Layer3::Cisco;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::Layer3::Cisco
-    Exporter/;
+@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::CiscoStats
+	SNMP::Info::Layer3
+	Exporter/;
 @SNMP::Info::Layer3::CiscoFWSM::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
-%MIBS = (
-    %SNMP::Info::Layer3::Cisco::MIBS,
-);
+%MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStats::MIBS, );
 
-%GLOBALS = (
-    %SNMP::Info::Layer3::Cisco::GLOBALS,
-);
+%GLOBALS
+	= ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS, );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::Cisco::FUNCS,
-
-);
-
-%MUNGE = (
-    %SNMP::Info::Layer3::Cisco::MUNGE,
+	%SNMP::Info::Layer3::FUNCS,
+	%SNMP::Info::CiscoStats::FUNCS,
 );
 
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, %SNMP::Info::CiscoStats::MUNGE, );
 
 # For FWSMs, the ipNetToPhysicalPhysAddress table appears to be of the form:
 # $ifindex.$inetaddresstype.$proto.$ip_address -> $mac_address
@@ -69,65 +66,65 @@ $VERSION = '3.11';
 # This doesn't really line up to what at_* return, so we munge it
 
 sub at_paddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
-    my $n_paddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $paddrs   = $fwsm->n2p_paddr($partial);
+	my $n_paddrs = {};
 
-	next if($proto != 4); # at_paddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $n_paddrs->{"$ifindex.$ip"} = $paddr;
-    }
-    return $n_paddrs;
+		next if ( $proto != 4 );    # at_paddr doesn't support non-IPv4
+
+		$n_paddrs->{"$ifindex.$ip"} = $paddr;
+	}
+	return $n_paddrs;
 }
 
 sub at_netaddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
+	my $paddrs = $fwsm->n2p_paddr($partial);
 
-    my $netaddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $netaddrs = {};
 
-	next if($proto != 4); # at_netaddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $netaddrs->{"$ifindex.$ip"} = $ip;
-    }
-    return $netaddrs;
+		next if ( $proto != 4 );    # at_netaddr doesn't support non-IPv4
+
+		$netaddrs->{"$ifindex.$ip"} = $ip;
+	}
+	return $netaddrs;
 }
 
 sub at_ifaddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
+	my $paddrs = $fwsm->n2p_paddr($partial);
 
-    my $ifaddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $ifaddrs = {};
 
-	next if($proto != 4); # at_ifaddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $ifaddrs->{"$ifindex.$ip"} = $ip;
-    }
-    return $ifaddrs;
+		next if ( $proto != 4 );    # at_ifaddr doesn't support non-IPv4
+
+		$ifaddrs->{"$ifindex.$ip"} = $ip;
+	}
+	return $ifaddrs;
 }
 
 1;
@@ -135,8 +132,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules for
-features not covered elsewhere.
+SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules
+for features not covered elsewhere.
 
 =head1 AUTHOR
 
@@ -146,14 +143,14 @@ Brian De Wolf
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $fwsm = new SNMP::Info(
-                        AutoSpecify => 1,
-                        Debug       => 1,
-                        # These arguments are passed directly to SNMP::Session
-                        DestHost    => 'myswitch',
-                        Community   => 'public',
-                        Version     => 2
-                        ) 
-    or die "Can't connect to DestHost.\n";
+						AutoSpecify => 1,
+						Debug       => 1,
+						# These arguments are passed directly to SNMP::Session
+						DestHost    => 'myswitch',
+						Community   => 'public',
+						Version     => 2
+						) 
+	or die "Can't connect to DestHost.\n";
 
  my $class      = $fwsm->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
@@ -166,7 +163,9 @@ Subclass for Cisco Firewall Services Modules
 
 =over
 
-=item SNMP::Info::Layer3::Cisco
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::Layer3
 
 =back
 
@@ -176,15 +175,21 @@ Subclass for Cisco Firewall Services Modules
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
 
 =head1 GLOBALS
 
-=head2 Global Methods imported from SNMP::Info::Layer3::Cisco
+=head2 Globals imported from SNMP::Info::CiscoStats
 
-See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -216,8 +221,12 @@ the MIB to provide that information isn't supported on FWSM.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+=head2 Table Methods imported from SNMP::Info::CiscoStats
 
-See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/CiscoSwitch.pm

@@ -0,0 +1,190 @@
+# SNMP::Info::Layer3::CiscoSwitch
+# $Id$
+#
+# Copyright (c) 2014 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoSwitch;
+
+use strict;
+use warnings;
+use Exporter;
+use SNMP::Info::CiscoAgg;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::Layer3::Cisco;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+@SNMP::Info::Layer3::CiscoSwitch::ISA = qw/
+    SNMP::Info::CiscoAgg
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::Layer3::Cisco
+    Exporter
+/;
+
+@SNMP::Info::Layer3::CiscoSwitch::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.22';
+
+%MIBS = (
+    %SNMP::Info::Layer3::Cisco::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::Cisco::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::Cisco::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::Cisco::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoAgg::MUNGE,
+);
+
+sub cisco_comm_indexing { return 1; }
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoSwitch - Base class for L3 Cisco switches
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $switch = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $switch->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Base subclass for Cisco Layer 2/3 Switches.  
+
+These devices have switch specific characteristics beyond those in
+traditional routers covered by L<SNMP::Info::Layer3::Cisco>. For example,
+port security interface information from L<SNMP::Info::CiscoPortSecurity>.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $swich = new SNMP::Info::Layer3::CiscoSwitch(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoAgg
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::Layer3::Cisco
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $switch->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Contivity.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Entity;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::MIBS, %SNMP::Info::Layer3::MIBS, %SNMP::Info::Entity::MIBS,

Info/Layer3/Dell.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -213,6 +213,10 @@ sub _vendor {
     }
 }
 
+# dot1qTpFdbTable uses dot1qVlanIndex rather than dot1qFdbId as index,
+# so pretend we don't have the mapping
+sub qb_fdb_index {return}
+
 1;
 __END__
 
@@ -387,6 +391,10 @@ sometimes not unique.
 Returns reference to hash of iid to current link administrative duplex
 setting.
 
+=item $dell->qb_fdb_index()
+
+Returns nothing to work around incorrect indexing of C<dot1qTpFdbTable>
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3

Info/Layer3/Enterasys.pm

@@ -44,7 +44,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::CDP::MIBS,
@@ -149,11 +149,47 @@ sub i_duplex_admin {
     return $enterasys->mau_i_duplex_admin($partial);
 }
 
-#  LLDP table timefilter implementation continuously increments when walked
+#  TimeFilter implementation continuously increments when walked
 #  and we may never reach the end of the table.  This behavior can be
 #  modified with the "set snmp timefilter break disable" command,
 #  unfortunately it is not the default.  Query with a partial value of zero
-#  which means no time filter.
+#  which means no time filter for tables with and index containing a
+#  TimeFilter
+
+sub qb_fdb_index {
+    my $bridge  = shift;
+
+    my $qb_fdb_ids = $bridge->dot1qVlanFdbId(0) || {};
+
+    # Strip the TimeFilter
+    my $vl_fdb_index = {};
+    for my $orig (keys(%$qb_fdb_ids)) {
+        (my $new = $orig) =~ s/^\d+\.//;
+        $vl_fdb_index->{$new} = $qb_fdb_ids->{$orig};
+    }
+
+    return $vl_fdb_index;
+}
+
+sub i_vlan_membership {
+    my $bridge  = shift;
+    my $partial = shift;
+
+    # dot1qVlanCurrentTable TimeFilter index
+    my $v_ports = $bridge->qb_cv_egress(0) || $bridge->qb_v_egress();
+
+    return $bridge->_vlan_hoa($v_ports, $partial);
+}
+
+sub i_vlan_membership_untagged {
+    my $bridge  = shift;
+    my $partial = shift;
+
+    # dot1qVlanCurrentTable TimeFilter index
+    my $v_ports = $bridge->qb_cv_untagged(0) || $bridge->qb_v_untagged();
+
+    return $bridge->_vlan_hoa($v_ports, $partial);
+}
 
 sub lldp_ip {
     my $enterasys = shift;
@@ -359,9 +395,9 @@ L<SNMP::Info::MAU/"TABLE METHODS">.
 
 =back
 
-=head2 Link Layer Discovery Protocol (LLDP) Overrides
+=head2 Time Filter Table Index Overrides
 
-The LLDP table time filter implementation continuously increments when
+The time filter C<TimeFilter> implementation continuously increments when
 walked and we may never reach the end of the table.  This behavior can be
 modified with the C<"set snmp timefilter break disable"> command,
 unfortunately it is not the default.  These methods are overridden to
@@ -369,6 +405,12 @@ supply a partial value of zero which means no time filter.
 
 =over
 
+=item $enterasys->qb_fdb_index()
+
+=item $enterasys->i_vlan_membership()
+
+=item $enterasys->i_vlan_membership_untagged()
+
 =item $enterasys->lldp_if()
 
 =item $enterasys->lldp_ip()

Info/Layer3/Extreme.pm

@@ -46,7 +46,7 @@ use SNMP::Info::EDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -542,6 +542,78 @@ sub _extremeware_i_vlan_membership {
     return \%i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $extreme = shift;
+    my $partial = shift;
+
+    # Some devices support Q-Bridge, if so short circuit and return it
+    my $q_bridge = $extreme->SUPER::i_vlan_membership_untagged($partial);
+    return $q_bridge if (ref {} eq ref $q_bridge and scalar keys %$q_bridge);
+
+    # Next we try extremeVlanOpaqueTable
+    my $xos = $extreme->_xos_i_vlan_membership_untagged($partial);
+    return $xos if (ref {} eq ref $xos and scalar keys %$xos);
+    
+    # Try older ifStack method
+    my $extremeware = $extreme->_extremeware_i_vlan_membership_untagged($partial);
+    return $extremeware if (ref {} eq ref $extremeware and scalar keys %$extremeware);
+    
+    return;
+}
+
+sub _xos_i_vlan_membership_untagged {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $index   = $extreme->i_index();
+    my $vlans   = $extreme->ex_vlan_id();
+    my $slotx   = $extreme->_slot_factor() || 1000;
+    my $u_ports = $extreme->ex_vlan_untagged() || {};
+
+    my $i_vlan_membership = {};
+    foreach my $idx ( keys %$u_ports ) {
+        next unless ( defined $u_ports->{$idx} );
+        my $u_portlist = $u_ports->{$idx};
+        my $ret        = [];
+
+        my ( $vlan_if, $slot ) = $idx =~ /^(\d+)\.(\d+)/;
+        my $vlan = $vlans->{$vlan_if} || '';
+
+        foreach my $portlist ( $u_portlist ) {
+
+            # Convert portlist bit array to bp_index array
+            for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+                push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
+                    if ( @$portlist[$i] );
+            }
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
+        }
+    }
+    return $i_vlan_membership;
+}
+
+# Assuming Cisco-like trunk behavior that native VLAN is transmitted untagged
+sub _extremeware_i_vlan_membership_untagged {
+    my $extreme  = shift;
+    my $partial = shift;
+
+    my $vlans = $extreme->_extremeware_i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+
+    return $i_vlan_membership;
+}
+
 # VLAN management.
 # See extreme-vlan.mib for a detailed description of
 # Extreme's use of ifStackTable and EXTREME-VLAN-MIB.
@@ -927,6 +999,12 @@ IDs.  These are the VLANs which are members of the egress list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $extreme->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $extreme->v_index()
 
 Returns VLAN IDs

Info/Layer3/F5.pm

@@ -38,7 +38,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -255,6 +255,37 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan_membership = {};
+    foreach my $iid ( keys %$tagged ) {
+        
+        next unless $tagged->{$iid} eq 'false';
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        push( @{ $i_vlan_membership->{$idx} }, $vlan );
+    }
+    return $i_vlan_membership;
+}
+
 1;
 __END__
 
@@ -391,6 +422,12 @@ IDs.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $f5->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $f5->v_index()
 
 Returns VLAN IDs

Info/Layer3/Force10.pm

@@ -43,7 +43,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -121,29 +121,25 @@ sub i_vlan {
     return $i_vlan;
 }
 
-sub i_vlan_membership {
+# Apparently index doesn't use VLAN ID, so override the HOA private
+# method here to correct the mapping 
+sub _vlan_hoa {
     my $force10 = shift;
-    my $partial = shift;
+    my ( $v_ports, $partial ) = @_;
 
-    my $index = $force10->bp_index();
+    my $index   = $force10->bp_index();
     my $v_index = $force10->v_index();
 
-    my $v_ports  = $force10->qb_v_egress();
-
-    # If given a partial it will be an ifIndex, we need to use dot1dBasePort
-    if ($partial) {
-        my %r_index = reverse %$index;
-        $partial    = $r_index{$partial};
-    }
-
-    my $i_vlan_membership = {};
-
+    my $vlan_hoa = {};
     foreach my $idx ( sort keys %{$v_ports} ) {
         next unless ( defined $v_ports->{$idx} );
         my $portlist = $v_ports->{$idx}; # is an array reference
         my $ret      = [];
         my $vlan_ndx = $idx;
 
+        # Strip TimeFilter if we're using VlanCurrentTable
+        ( $vlan_ndx = $idx ) =~ s/^\d+\.//;
+
         # Convert portlist bit array to bp_index array
         for ( my $i = 0; $i <= $#$portlist; $i++ ) {
             push( @{$ret}, $i + 1 ) if ( @$portlist[$i] );
@@ -160,11 +156,10 @@ sub i_vlan_membership {
             # the mapping from Q-BRIDGE-MIB::dot1qVlanFdbId 
             my $mod = $vlan_tag % 4096;
 
-            push ( @{ $i_vlan_membership->{$ifindex} }, ($mod) );
+            push ( @{ $vlan_hoa->{$ifindex} }, ($mod) );
         }
     }
-
-    return $i_vlan_membership;
+    return $vlan_hoa;
 }
 
 1;
@@ -278,12 +273,6 @@ Returns the VLAN names.
 
 Currently not implemented.
 
-=item $force10->i_vlan_membership()
-
-Returns reference to hash of arrays:
-key = C<ifIndex>, value = array of VLAN IDs.
-These are the VLANs which are members of the egress list for the port.
-
 =item $force10->i_duplex_admin()
 
 Returns info from F<MAU-MIB>

Info/Layer3/Fortinet.pm

@@ -0,0 +1,200 @@
+# SNMP::Info::Layer3::Fortinet
+#
+# Copyright (c) 2014 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Fortinet;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Fortinet::ISA
+    = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Fortinet::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.22';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'FORTINET-CORE-MIB'      => 'fnSysSerial',
+    'FORTINET-FORTIGATE-MIB' => 'fgVdMaxVdoms',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+);
+
+sub vendor {
+    return 'fortinet';
+}
+
+sub model {
+    my $fortinet = shift;
+    my $id = $fortinet->id() || '';
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^f[grsw][tfw]?//i;
+    return $model;
+}
+
+sub os {
+    return 'fortios';
+}
+
+sub os_ver {
+    my $fortinet = shift;
+    
+    my $ver = $fortinet->fgSysVersion() || '';
+
+    if ( $ver =~ /(\d+[\.\d]+)/ ) {
+        return $1;
+    }
+    
+    return $ver;
+}
+
+sub serial {
+    my $fortinet = shift;
+    
+    return $fortinet->fnSysSerial();
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Fortinet - SNMP Interface to Fortinet network devices.
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $fortinet = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $fortinet->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Fortinet network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $fortinet = new SNMP::Info::Layer3::Fortinet(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<FORTINET-CORE-MIB>
+
+=item F<FORTINET-FORTIGATE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $fortinet->vendor()
+
+Returns 'fortinet'
+
+=item $fortinet->model()
+
+Returns the chassis model.
+
+=item $fortinet->os()
+
+Returns 'fortios'
+
+=item $fortinet->os_ver()
+
+Returns the software version extracted from (C<systemVersion>).
+
+=item $fortinet->serial()
+
+Returns the chassis serial number.
+
+(C<fnSysSerial>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Foundry.pm

@@ -48,7 +48,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -97,6 +97,24 @@ $VERSION = '3.11';
     # FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleTable
     'ag_mod_type' => 'snAgentConfigModuleType',
 
+    # FOUNDRY-SN-AGENT-MIB::snVLanByPortTable
+    'stp_i_id'        => 'snVLanByPortVLanId',
+    'stp_i_mac'       => 'snVLanByPortBaseBridgeAddress',
+    'stp_i_time'      => 'snVLanByPortStpTimeSinceTopologyChange',
+    'stp_i_ntop'      => 'snVLanByPortStpTopChanges',
+    'stp_i_root'      => 'snVLanByPortStpDesignatedRoot',
+    'stp_i_root_port' => 'snVLanByPortStpRootPort',
+    'stp_i_priority'  => 'snVLanByPortStpPriority',
+
+    # FOUNDRY-SN-AGENT-MIB::snPortStpTable
+    'stp_p_id'       => 'snPortStpPortNum',
+    'stp_p_stg_id'   => 'snPortStpVLanId',
+    'stp_p_priority' => 'snPortStpPortPriority',
+    'stp_p_state'    => 'snPortStpPortState',
+    'stp_p_cost'     => 'snPortStpPortDesignatedCost',
+    'stp_p_root'     => 'snPortStpPortDesignatedRoot',
+    'stp_p_bridge'   => 'snPortStpPortDesignatedBridge',
+    'stp_p_port'     => 'snPortStpPortDesignatedPort',
 );
 
 %MUNGE = (
@@ -106,6 +124,11 @@ $VERSION = '3.11';
 
     'ag_mod2_type' => \&SNMP::Info::munge_e_type,
     'ag_mod_type'  => \&SNMP::Info::munge_e_type,
+    'stp_i_mac'    => \&SNMP::Info::munge_mac,
+    'stp_i_root'   => \&SNMP::Info::munge_prio_mac,
+    'stp_p_root'   => \&SNMP::Info::munge_prio_mac,
+    'stp_p_bridge' => \&SNMP::Info::munge_prio_mac,
+    'stp_p_port'   => \&SNMP::Info::munge_prio_port,
 );
 
 sub i_ignore {
@@ -277,20 +300,6 @@ sub interfaces {
     return $i_descr;
 }
 
-# Reported hangs on a EdgeIron 24G
-sub stp_p_state {
-    my $foundry = shift;
-    my $partial = shift;
-
-    my $descr = $foundry->description();
-    if ( $descr =~ m/\bEdgeIron 24G\b/ ) {
-        return;
-    }
-
-    return $foundry->SUPER::stp_p_state($partial) || {};
-
-}
-
 # Entity MIB is supported on the Brocade NetIron XMR, NetIron MLX, MLXe,
 # NetIron CES, NetIron CER, and older EdgeIron series devices.
 # Try Entity MIB methods first and fall back to Pseudo ENTITY-MIB methods for
@@ -809,7 +818,7 @@ sub agg_ports {
   foreach my $m (keys %$trunks) {
       my $skip = 0;
       while (my $s = unpack("x${skip}n2", $trunks->{$m})) {
-          $ret->{ $ports->{$s} } = $m;
+          $ret->{ $ports->{$s} } = $ports->{$m};
           $skip += 2;
       }
   }
@@ -817,6 +826,26 @@ sub agg_ports {
   return $ret;
 }
 
+sub i_stp_state {
+    my $foundry  = shift;
+    my $partial = shift;
+
+    my $bp_index    = $foundry->bp_index($partial);
+    my $stp_p_state = $foundry->dot1dStpPortState($partial);
+
+    my %i_stp_state;
+
+    foreach my $index ( keys %$stp_p_state ) {
+        my $state = $stp_p_state->{$index};
+        my $iid   = $bp_index->{$index};
+        next unless defined $iid;
+        next unless defined $state;
+        $i_stp_state{$iid} = $state;
+    }
+
+    return \%i_stp_state;
+}
+
 1;
 __END__
 
@@ -1007,14 +1036,10 @@ Returns reference to hash of interface link duplex status.
 
 Crosses $foundry->sw_duplex() with $foundry->sw_index()
 
-=item $foundry->stp_p_state()
-
-"The port's current state as defined by application of the Spanning Tree
-Protocol.
-
-Skipped if device is an EdgeIron 24G due to reports of hangs.
-
-(C<dot1dStpPortState>)
+=item $foundry->i_stp_state()
+ 
+Returns the mapping of (C<dot1dStpPortState>) to the interface
+index (iid).
 
 =item $foundry->agg_ports()
 

Info/Layer3/H3C.pm

@@ -33,17 +33,26 @@ use strict;
 use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::LLDP;
+use SNMP::Info::IEEE802dot3ad 'agg_ports_lag';
 
-@SNMP::Info::Layer3::H3C::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
-@SNMP::Info::Layer3::H3C::EXPORT_OK = qw//;
+@SNMP::Info::Layer3::H3C::ISA = qw/
+  SNMP::Info::IEEE802dot3ad
+  SNMP::Info::LLDP
+  SNMP::Info::Layer3
+  Exporter
+/;
+@SNMP::Info::Layer3::H3C::EXPORT_OK = qw/
+  agg_ports
+/;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::IEEE802dot3ad::MIBS,
     'HH3C-LswDEVM-MIB'     => 'hh3cDevMFanStatus',
     'HH3C-LswINF-MIB'      => 'hh3cSlotPortMax',
     'HH3C-LSW-DEV-ADM-MIB' => 'hh3cLswSysVersion',
@@ -73,7 +82,7 @@ $VERSION = '3.11';
 sub vendor {
     my $h3c = shift;
     my $mfg = $h3c->entPhysicalMfgName(1) || {};
-    return $mfg->{1};
+    return $mfg->{1} || "H3C";
 }
 
 sub os {
@@ -81,7 +90,7 @@ sub os {
     my $descr   = $h3c->description();
 
     return $1 if ( $descr =~ /(\S+)\s+Platform Software/ );
-    return;
+    return "H3C";
 }
 
 sub os_ver {
@@ -92,6 +101,7 @@ sub os_ver {
     my $os_ver  = undef;
 
     $os_ver = "$1 $2" if ( $descr =~ /Software Version ([^,]+),.*(Release\s\S+)/i );
+    $os_ver = "$1" if ( $descr =~ /Product Version ([0-9.]+)/i );
 
     return $ver_release->{2} || $os_ver;
 }
@@ -113,6 +123,8 @@ sub i_ignore {
     return \%i_ignore;
 }
 
+sub agg_ports { return agg_ports_lag(@_) }
+
 1;
 __END__
 
@@ -219,6 +231,12 @@ Returns reference to hash.  Increments value of IID if port is to be ignored.
 
 Ignores loopback
 
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3

Info/Layer3/HP9300.pm

@@ -42,7 +42,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/IBMGbTor.pm

@@ -41,7 +41,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Juniper.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -89,6 +89,20 @@ sub os {
     return 'junos';
 }
 
+sub layers {
+    my $juniper = shift;
+    
+    my $layers = $juniper->SUPER::layers();
+    # Some models don't report L2 properly 
+    my $macs   = $juniper->fw_mac();
+    
+    if (keys %$macs) {
+        my $l = substr $layers, 6, 1, "1";
+    }
+
+    return $layers;
+}
+
 sub os_ver {
     my $juniper = shift;
 
@@ -149,6 +163,13 @@ sub i_trunk {
     return \%i_trunk;
 }
 
+sub qb_fdb_index {
+    my $juniper  = shift;
+    my $partial = shift;
+
+    return $juniper->jnxExVlanTag($partial);
+}
+
 # 'v_type'     => 'jnxExVlanType',
 sub v_type {
     my $juniper = shift;
@@ -200,22 +221,24 @@ sub i_vlan {
     return $i_vlan;
 }
 
-sub i_vlan_membership {
-    my $juniper  = shift;
-    my $partial = shift;
+# Index doesn't use VLAN ID, so override the HOA private method here to
+# correct the mapping 
+sub _vlan_hoa {
+    my $juniper = shift;
+    my ( $v_ports, $partial ) = @_;
 
-    my $index = $juniper->bp_index();
-    my ($v_index)  = $juniper->jnxExVlanTag($partial);
+    my $index    = $juniper->bp_index();
+    my $v_index  = $juniper->jnxExVlanTag($partial);
 
-    my $v_ports = $juniper->qb_v_egress() || {};
-
-    my $i_vlan_membership = {};
-
-    foreach my $idx ( sort keys %$v_ports ) {
+    my $vlan_hoa = {};
+    foreach my $idx ( keys %$v_ports ) {
         next unless ( defined $v_ports->{$idx} );
-        my $portlist = $v_ports->{$idx}; # is an array reference
+        my $portlist = $v_ports->{$idx};
         my $ret      = [];
-        my $vlan_ndx = $idx;
+        my $vlan_ndx;
+
+        # Strip TimeFilter if we're using VlanCurrentTable
+        ( $vlan_ndx = $idx ) =~ s/^\d+\.//;
 
         # Convert portlist bit array to bp_index array
         for ( my $i = 0; $i <= $#$portlist; $i++ ) {
@@ -227,11 +250,10 @@ sub i_vlan_membership {
             my $ifindex = $index->{$port};
             next unless ( defined($ifindex) );    # shouldn't happen
             next if ( defined $partial and $ifindex !~ /^$partial$/ );
-            push ( @{ $i_vlan_membership->{$ifindex} }, $v_index->{$vlan_ndx} );
+            push( @{ $vlan_hoa->{$ifindex} }, $v_index->{$vlan_ndx} );
         }
     }
-
-    return $i_vlan_membership;
+    return $vlan_hoa;
 }
 
 # Pseudo ENTITY-MIB methods
@@ -590,6 +612,11 @@ Returns 'juniper'
 
 Returns 'junos'
 
+=item $juniper->layers()
+
+Checks forwarding table for Layer 2 support since some routers with switches
+do not report layers properly.
+
 =item $juniper->os_ver()
 
 Returns the software version extracted first from C<sysDescr> or
@@ -636,6 +663,10 @@ to a hash.
 
 =over
 
+=item $juniper->qb_fdb_index()
+
+Returns reference to hash: key = VLAN ID, value = FDB ID.
+
 =item $juniper->v_index()
 
 (C<jnxExVlanTag>)
@@ -656,11 +687,6 @@ to a hash.
 
 Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
-=item $juniper->i_vlan_membership()
-
-Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
-IDs.  These are the VLANs which are members of the egress list for the port.
-
 =back
 
 =head2 Pseudo F<ENTITY-MIB> information

Info/Layer3/Lantronix.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Microsoft.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, );
 

Info/Layer3/Mikrotik.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -50,17 +50,30 @@ $VERSION = '3.11';
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
     'hrSystemUptime' => 'hrSystemUptime',
+    'os_level'       => 'mtxrLicLevel',
     'os_ver'         => 'mtxrLicVersion',
+    'serial1'        => 'mtxrSystem.3.0',
+    'firmware'       => 'mtxrSystem.4.0',
+    'fan_type'       => 'mtxrHlActiveFan',
 );
 
-%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+);
 
-%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+);
 
 sub vendor {
     return 'mikrotik';
 }
 
+sub serial {
+    my $mikrotik = shift;
+    return $mikrotik->serial1;
+}
+
 sub model {
     my $mikrotik = shift;
     my $descr = $mikrotik->description() || '';
@@ -73,6 +86,18 @@ sub os {
     return 'routeros';
 }
 
+sub board_temp {
+    my $mikrotik = shift;
+    my $temp = $mikrotik->mtxrHlTemperature;
+    return $temp / 10.0;
+}
+
+sub cpu_temp {
+    my $mikrotik = shift;
+    my $temp = $mikrotik->mtxrHlProcessorTemperature;
+    return $temp / 10.0;
+}
+
 1;
 __END__
 
@@ -148,6 +173,23 @@ Tries to extract the device model from C<sysDescr>.
 
 Returns the value of C<mtxrLicVersion>.
 
+=item $mikrotik->os_level()
+
+Returns the value of RouterOS level C<mtxrLicLevel>
+
+=item $mikrotik->board_temp()
+=item $mikrotik->cpu_temp()
+
+Returns the appropriate temperature values
+
+=item $mikrotik->serial()
+
+Returns the device serial.
+
+=item $mikrotik->firmware()
+
+Returns the firmware version of hardware.
+
 =back
 
 =head2 Globals imported from SNMP::Info::Layer3

Info/Layer3/N1600.pm

@@ -41,7 +41,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/NetSNMP.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Netscreen.pm

@@ -40,7 +40,7 @@ use SNMP::Info::IEEE802dot11;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -69,17 +69,17 @@ $VERSION = '3.11';
     ns_i_up          => 'nsIfStatus',
     ns_ip_table      => 'nsIfIp',
     ns_ip_netmask    => 'nsIfNetmask',
-    at_index         => 'nsIpArpIfIdx',
-    at_paddr         => 'nsIpArpMac',
-    at_netaddr       => 'nsIpArpIp',
     bp_index         => 'nsIfInfo',
+    std_at_paddr     => 'ipNetToMediaPhysAddress',
+    ns_at_paddr      => 'nsIpArpMac',
 );
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE,
     %SNMP::Info::IEEE802dot11::MUNGE,
-    'ns_i_mac' => \&SNMP::Info::munge_mac,
-    'at_paddr' => \&SNMP::Info::munge_mac,
+    'ns_i_mac'     => \&SNMP::Info::munge_mac,
+    'ns_at_paddr'  => \&SNMP::Info::munge_mac,
+    'std_at_paddr' => \&SNMP::Info::munge_mac,
 );
 
 sub layers {
@@ -478,6 +478,33 @@ sub i_80211channel {
     return \%i_80211channel;
 }
 
+sub at_index {
+    my $netscreen = shift;
+
+    my $std = $netscreen->ipNetToMediaIfIndex();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->nsIpArpIfIdx();
+}
+
+sub at_paddr {
+    my $netscreen = shift;
+
+    my $std = $netscreen->std_at_paddr();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->ns_at_paddr();
+}
+
+sub at_netaddr {
+    my $netscreen = shift;
+
+    my $std = $netscreen->ipNetToMediaNetAddress();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->nsIpArpIp();
+}
+
 1;
 
 __END__
@@ -727,6 +754,33 @@ identifier (IID).
 
 =back
 
+=head2 Arp Cache Table
+
+=over
+
+=item $netscreen->at_index()
+
+Returns reference to hash.  Maps ARP table entries to Interface IIDs 
+
+If the device doesn't support C<ipNetToMediaIfIndex>, this will try
+the proprietary C<nsIpArpIfIdx>.
+
+=item $netscreen->at_paddr()
+
+Returns reference to hash.  Maps ARP table entries to MAC addresses. 
+
+If the device doesn't support C<ipNetToMediaPhysAddress>, this will try
+the proprietary C<nsIpArpMac>.
+
+=item $netscreen->at_netaddr()
+
+Returns reference to hash.  Maps ARP table entries to IP addresses. 
+
+If the device doesn't support C<ipNetToMediaNetAddress>, this will try
+the proprietary C<nsIpArpIp>.
+
+=back
+
 =head3 Wireless Information
 
 =over 

Info/Layer3/Nexus.pm

@@ -1,6 +1,6 @@
 # SNMP::Info::Layer3::Nexus
 #
-# Copyright (c) 2012 Eric Miller
+# Copyright (c) 2014 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -30,38 +30,23 @@
 package SNMP::Info::Layer3::Nexus;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
-use SNMP::Info::CiscoVTP;
+use SNMP::Info::Layer3::CiscoSwitch;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::Nexus::ISA = qw/
-    SNMP::Info::CiscoVTP 
-    SNMP::Info::CiscoStpExtensions
-    SNMP::Info::LLDP
-    SNMP::Info::CDP 
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
-    Exporter
-/;
+	SNMP::Info::Layer3::CiscoSwitch
+	Exporter
+	/;
 
 @SNMP::Info::Layer3::Nexus::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -70,175 +55,170 @@ $VERSION = '3.11';
 # The @ISA order should be reverse of these orders.
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,
-    %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::LLDP::MIBS,
-    %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,
-    'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
+	%SNMP::Info::Layer3::CiscoSwitch::MIBS,
+	'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
-    'mac' => 'dot1dBaseBridgeAddress',
+	%SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
+	'mac' => 'dot1dBaseBridgeAddress',
 );
 
-%FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,
-    %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,
-    %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
-);
+%FUNCS = ( %SNMP::Info::Layer3::CiscoSwitch::FUNCS, );
 
-
-%MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,
-    %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         
-    %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,
-    %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,    
-);
-
-sub cisco_comm_indexing { return 1; }
-
-sub vendor {
-    return 'cisco';
-}
+%MUNGE = ( %SNMP::Info::Layer3::CiscoSwitch::MUNGE, );
 
 sub os {
-    return 'nx-os';
+	return 'nx-os';
 }
 
 sub os_ver {
-    my $nexus = shift; 
-    my $descr = $nexus->description();
-    
-    return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
-    return $descr;
+	my $nexus = shift;
+	my $descr = $nexus->description();
+
+	return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
+	return $descr;
 }
 
 sub serial {
-    my $nexus = shift;
+	my $nexus = shift;
 
-    my $e_parent = $nexus->e_parent();
+	my $e_parent = $nexus->e_parent();
 
-    foreach my $iid ( keys %$e_parent ) {
-	my $parent = $e_parent->{$iid};
-        if ($parent eq '0') {
-	    my $serial = $nexus->e_serial($iid);
-	    return $serial->{$iid};
+	foreach my $iid ( keys %$e_parent ) {
+		my $parent = $e_parent->{$iid};
+		if ( $parent eq '0' ) {
+			my $serial = $nexus->e_serial($iid);
+			return $serial->{$iid};
+		}
 	}
-    }    
-    return;
+	return;
 }
 
 # sysObjectID returns an IID to an entry in the CISCO-ENTITY-VENDORTYPE-OID-MIB.
 # Look it up and return it.
 sub model {
-    my $nexus = shift;
-    my $id    = $nexus->id();
+	my $nexus = shift;
+	my $id    = $nexus->id();
 
-    unless ( defined $id ) {
-        print
-            " SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
-            if $nexus->debug();
-        return;
-    }
+	unless ( defined $id ) {
+		print
+			" SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
+			if $nexus->debug();
+		return;
+	}
 
-    my $model = &SNMP::translateObj($id);
+	my $model = &SNMP::translateObj($id);
 
-    return $id unless defined $model;
+	return $id unless defined $model;
 
-    $model =~ s/^cevChassis//i;
-    return $model;
+	$model =~ s/^cevChassis//i;
+	return $model;
 }
 
 # Reported version 6.x of NX-OS doesn't use the IPv4 address as index
 # override methods in ipAddrTable
 sub ip_table {
-    my $nexus         = shift;
-    my $orig_ip_table = $nexus->orig_ip_table();
+	my $nexus         = shift;
+	my $orig_ip_table = $nexus->orig_ip_table();
 
-    my %ip_table;
-    foreach my $iid ( keys %$orig_ip_table ) {
-	my $ip = $orig_ip_table->{$iid};
-	next unless defined $ip;
+	my %ip_table;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip = $orig_ip_table->{$iid};
+		next unless defined $ip;
 
-	$ip_table{$ip} = $ip;
-    }
-    return \%ip_table;
+		$ip_table{$ip} = $ip;
+	}
+
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_table{$addr} = $addr unless exists $ip_table{$addr};
+	}
+
+	return \%ip_table;
 }
 
 sub ip_index {
-    my $nexus         = shift;
-    my $orig_ip_table = $nexus->orig_ip_table();
-    my $orig_ip_index = $nexus->orig_ip_index();
+	my $nexus         = shift;
+	my $orig_ip_table = $nexus->orig_ip_table();
+	my $orig_ip_index = $nexus->orig_ip_index();
 
-    my %ip_index;
-    foreach my $iid ( keys %$orig_ip_table ) {
-	my $ip    = $orig_ip_table->{$iid};
-	my $index = $orig_ip_index->{$iid};
+	my %ip_index;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip    = $orig_ip_table->{$iid};
+		my $index = $orig_ip_index->{$iid};
 
-	next unless ( defined $ip && defined $index );
+		next unless ( defined $ip && defined $index );
 
-	$ip_index{$ip} = $index;
-    }
-    return \%ip_index;
+		$ip_index{$ip} = $index;
+	}
+
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_index{$addr} = 0 unless exists $ip_index{$addr};
+	}
+
+	return \%ip_index;
 }
 
 sub ip_netmask {
-    my $nexus           = shift;
-    my $orig_ip_table   = $nexus->orig_ip_table();
-    my $orig_ip_netmask = $nexus->orig_ip_netmask();
+	my $nexus           = shift;
+	my $orig_ip_table   = $nexus->orig_ip_table();
+	my $orig_ip_netmask = $nexus->orig_ip_netmask();
 
-    my %ip_netmask;
-    foreach my $iid ( keys %$orig_ip_table ) {
-	my $ip      = $orig_ip_table->{$iid};
-	my $netmask = $orig_ip_netmask->{$iid};
+	my %ip_netmask;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip      = $orig_ip_table->{$iid};
+		my $netmask = $orig_ip_netmask->{$iid};
 
-	next unless ( defined $ip && defined $netmask );
+		next unless ( defined $ip && defined $netmask );
 
-	$ip_netmask{$ip} = $netmask;
-    }
-    return \%ip_netmask;
+		$ip_netmask{$ip} = $netmask;
+	}
+
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_netmask{$addr} = $local_addrs->{$addr} unless exists $ip_netmask{$addr};
+	}
+
+	return \%ip_netmask;
 }
 
 sub ip_broadcast {
-    my $nexus             = shift;
-    my $orig_ip_table     = $nexus->orig_ip_table();
-    my $orig_ip_broadcast = $nexus->orig_ip_broadcast();
+	my $nexus             = shift;
+	my $orig_ip_table     = $nexus->orig_ip_table();
+	my $orig_ip_broadcast = $nexus->orig_ip_broadcast();
 
-    my %ip_broadcast;
-    foreach my $iid ( keys %$orig_ip_table ) {
-	my $ip        = $orig_ip_table->{$iid};
-	my $broadcast = $orig_ip_broadcast->{$iid};
+	my %ip_broadcast;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip        = $orig_ip_table->{$iid};
+		my $broadcast = $orig_ip_broadcast->{$iid};
 
-	next unless ( defined $ip && defined $broadcast );
+		next unless ( defined $ip && defined $broadcast );
 
-	$ip_broadcast{$ip} = $broadcast;
-    }
-    return \%ip_broadcast;
+		$ip_broadcast{$ip} = $broadcast;
+	}
+
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_broadcast{$addr} = $addr unless exists $ip_broadcast{$addr};
+	}
+
+	return \%ip_broadcast;
+}
+
+sub _local_addr {
+	my $nexus = shift;
+	my $listen_addr = $nexus->udpLocalAddress() || {};
+	my %local_addr;
+	foreach my $sock (keys %$listen_addr) {
+		my $addr = $listen_addr->{$sock};
+		next if ($addr =~ /^127\./); # localhost
+		next if ($addr eq '0.0.0.0'); # "any"
+		next if ($addr =~ /^(\d+)\./ and $1 ge 224); # Class D or E space: Multicast or Experimental
+		$local_addr{$addr} = '255.255.255.255'; # Fictional netmask
+	}
+	return \%local_addr;
 }
 
 1;
@@ -257,14 +237,14 @@ Eric Miller
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $nexus = new SNMP::Info(
-                        AutoSpecify => 1,
-                        Debug       => 1,
-                        # These arguments are passed directly to SNMP::Session
-                        DestHost    => 'myswitch',
-                        Community   => 'public',
-                        Version     => 2
-                        ) 
-    or die "Can't connect to DestHost.\n";
+						AutoSpecify => 1,
+						Debug       => 1,
+						# These arguments are passed directly to SNMP::Session
+						DestHost    => 'myswitch',
+						Community   => 'public',
+						Version     => 2
+						) 
+	or die "Can't connect to DestHost.\n";
 
  my $class      = $nexus->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
@@ -282,23 +262,7 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::CiscoStpExtensions
-
-=item SNMP::Info::LLDP
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =back
 
@@ -314,25 +278,9 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 =head1 GLOBALS
@@ -341,10 +289,6 @@ These are methods that return a scalar value from SNMP
 
 =over
 
-=item $nexus->vendor()
-
-Returns 'cisco'
-
 =item $nexus->os()
 
 Returns C<'nx-os'>
@@ -367,10 +311,6 @@ Removes C<'cevChassis'> for readability.
 
 C<dot1dBaseBridgeAddress>
 
-=item $nexus->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =back
 
 =head2 Overrides
@@ -381,6 +321,13 @@ Each entry in this table is an IP address in use on this device.  Some
 versions do not index the table with the IPv4 address in accordance with
 the MIB definition, these overrides correct that behavior.
 
+Also, the table is augmented with IP addresses in use by UDP sockets on the 
+device, as determined by checking F<RFC1213-MIB::udpLocalAddress>. Valid 
+addresses from this table (any IPv4 that is not localhost, 0.0.0.0, Class D
+(multicast) or Class E (experimental) are added as a /32 on interface ID 0.
+This is a workaround to determine possible VPC Keepalive IP addresses on the
+device, which are probably advertised by CDP/LLDP to neighbors.
+
 =over
 
 =item $nexus->ip_index()
@@ -409,86 +356,18 @@ Gives broadcast address for IP table entry.
 
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
 =cut

Info/Layer3/PacketFront.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Passport.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::RapidCity::MIBS,
@@ -612,6 +612,69 @@ sub bp_index {
     return \%bp_index;
 }
 
+# We have devices which support BRIDGE-MIB, Q-BRIDGE-MIB, and RAPID-CITY
+# exclusively.  Use standards-based first and fall back to RAPID-CITY.
+sub fw_mac {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_mac($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    my $qb_fw_port = $passport->rcBridgeTpFdbPort($partial);
+    my $qb_fw_mac  = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _rc_fdbtable_index($idx);
+        $qb_fw_mac->{$idx} = $mac;
+    }
+    return $qb_fw_mac;
+}
+
+sub fw_port {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_port($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $passport->rcBridgeTpFdbPort($partial);
+}
+
+sub fw_status {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_status($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+    
+    return $passport->rcBridgeTpFdbStatus($partial);
+}
+
+sub qb_fw_vlan {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::qb_fw_vlan($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    my $qb_fw_port = $passport->rcBridgeTpFdbPort($partial);
+    my $qb_fw_vlan = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _rc_fdbtable_index($idx);
+        $qb_fw_vlan->{$idx} = $fdb_id;
+    }
+    return $qb_fw_vlan;
+}
+
+# break up the rcBridgeTpFdbEntry INDEX into FDB ID and MAC Address.
+sub _rc_fdbtable_index {
+    my $idx    = shift;
+    my @values = split( /\./, $idx );
+    my $fdb_id = shift(@values);
+    return ( $fdb_id, join( ':', map { sprintf "%02x", $_ } @values ) );
+}
+
+
 # Pseudo ENTITY-MIB methods
 
 sub e_index {
@@ -1266,6 +1329,40 @@ problems with F<BRIDGE-MIB>
 
 =back
 
+=head2 Forwarding Table
+
+These methods utilize, in order; F<Q-BRIDGE-MIB>, F<BRIDGE-MIB>, and
+F<RAPID-CITY> to obtain the forwarding table information.
+
+=over 
+
+=item $passport->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses
+
+(C<dot1qTpFdbAddress>), (C<dot1dTpFdbAddress>), (C<rcBridgeTpFdbAddress>)
+
+=item $passport->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+(C<dot1qTpFdbPort>), (C<dot1dTpFdbPort>), (C<rcBridgeTpFdbPort>)
+
+=item $passport->fw_status()
+
+Returns reference to hash of forwarding table entries status
+
+(C<dot1qTpFdbStatus>), (C<dot1dTpFdbStatus>), (C<rcBridgeTpFdbStatus>)
+
+=item $passport->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
+(C<dot1qFdbId>), (C<rcBridgeTpFdbVlanId>)
+
+=back
+
 =head2 Pseudo F<ENTITY-MIB> information
 
 These devices do not support F<ENTITY-MIB>.  These methods emulate Physical

Info/Layer3/Pf.pm

@@ -41,7 +41,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Pica8.pm

@@ -39,7 +39,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/SonicWALL.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,

Info/Layer3/Steelhead.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.11';
+$VERSION = '3.22';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,