release 3.08

Brocade (Foundry) POE Support

.gitignore

@@ -0,0 +1 @@
+*.db

ChangeLog

@@ -1,5 +1,181 @@
 SNMP::Info - Friendly OO-style interface to Network devices using SNMP.
 
+version 3.08 (2013-10-22)
+
+   [ENHANCEMENTS]
+
+    * Rewrite of L3::Aruba, now supports pseudo ENTITY-MIB methods to gather
+      module information, more interface information for APs, more
+      wireless information to include client stats, and arpnip information
+      from wireless clients.  WARNING: AP device interfaces are now based on
+      AP MAC and radio versus BSSID to align with other wireless classes.
+    * [#64] Add i_speed_admin() to L2::2900 (psychiatric)
+    * [#66] Support for VSS via CISCO-VIRTUAL-SWITCH-MIB in L3::6500
+    * [#67] Add the possibility to set speed for Layer3::C4000 (psychiatric)
+    * [#69] set speed and duplex on Cisco VSS system (psychiatric)
+    * munge_null() now removes all non-printable control characters
+    * Support Aironet standalone access points (Layer2::Aironet) running IOS15
+    * lldp_port() returns port ID instead of port description if the port ID
+      subtype is "interface name".  This improves the ability to correlate
+      ports by name when a port description is also set.
+    * Add docs note about make_snmpdata.pl under EXTENDING SNMP::Info
+    * [#46] Brocade (Foundry) Module Support
+    * Brocade (Foundry) POE Support
+    * Support peth_port_power() power supplied by PoE ports in L2::Baystack
+    * Update test_class.pl utility to allow ignore of snmp.conf and test
+      summarize more standard class methods
+    * On EOS, the LLDP port ID is a dot1d port
+    * Use LLDP in Layer3::Aruba, for switches
+    * Clean up more model names in L2::Baystack
+
+   [BUG FIXES]
+
+    * [#68] Fix device_port entries for switches with non-unique
+      ifDesc (Nic Bernstein)
+    * Don't try to munge undef values
+    * [#49] Perl 5.18 UNIVERSAL::can change could cause infinite loop 
+    * Silence warning from uninitialized variable in L3::Passport e_descr()
+
+version 3.07 (2013-10-01)
+
+   [ENHANCEMENTS]
+
+    * Support for Pica8 switches in L3::Pica8
+    * Factor out cache/munge code from global/attr methods
+
+   [BUG FIXES]
+
+   * [#48] Switch duplicate J9624A for J9626A in Layer2/HP (R. Kerr)
+   * Correct device serial number reporting for Nexus devices
+   * Override ipAddrTable methods in L3::Nexus as some versions do not
+     index the table with the IPv4 address in accordance with the MIB
+     definition.
+
+version 3.05 (2013-08-16)
+
+   [ENHANCEMENTS]
+
+    * [#47] Add model info on HP 2530 and HP 2920 series
+    * Add support for Cisco Small Business series
+      Layer2/CiscoSB class
+    * Add proper LLDP support to Netgear.pm
+    * Change $netgear->interfaces() to use ifName rather than ifDescr
+      as the former is unique per interface while the latter is not.  
+      If ifName is not present, concatenate ifDescr and ifIndex
+      to achieve a unique value.
+    * Properly report hardware version, Serial No. and OS Version for
+      Netgear.
+    
+
+version 3.03 (2013-07-11)
+
+    [BUG FIXES]
+
+    * Add missing =back to POD (A. Hartmaier)
+
+version 3.02 (2013-07-08)
+
+    [ENHANCEMENTS]
+
+    * Properly pull os_ver from Netgear GS series switches.
+    * Support Alcatel devices with layer3 features.
+    * Identify Cisco Aironet 1140 APs as Layer2::Aironet
+    * LAN switch support added to Layer3::Aruba class
+    * [RT#86725] - Identify Cisco Catalyst 3850 as Layer3::C6500 (C. Causer)
+
+version 3.01 (2013-04-13)
+
+    [API Changes]
+
+    * The methods c_ip(), c_if(), c_port(), c_id(), and c_platform() now
+      represent common topology methods and will try to return a combined
+      hash of data from all L2 topology protocols either running on the
+      device or specified in the method call.  The topology specific methods
+      have been been prefixed with the protocol name in lowercase so that
+      they can be called directly, sonmp_ip(), cdp_ip(), etc.
+    * L2::Bay and L2::Foundry have been removed from the distribution.  Both
+      classes were depreciated and all functionality is available through
+      L2::Baystack and L3::Foundry. 
+
+    [NEW FEATURES]
+
+    * [3160037] - Support _raw suffix on methods to skip munging
+    * [3185391] - Support for F5 devices in new class L3::F5
+    * [3323814] - Arp support for Netscreen (David Baldwin)
+    * [3323821] - Support for Netscreen w/ WLAN (eg SSG5) (David Baldwin)
+    * [3599277] - Q-BRIDGE Support to collect VLAN in macsuck
+    * [3033731] - Alcatel-Lucent OmniSwich AMAP Support in new AMAP class
+    * [3598896] - Lantronix device support (J R Binks)
+    * [3598337] - Lantronix SLC support
+    * Support for Cisco ASA in L3::CiscoASA (Kraus/Hartmaier/Bernstein)
+    * Support for Avaya VSP 9000 series in L3::Passport
+    * Support for Avaya VSP 7000 series in L2::Baystack
+    * Support Avaya (Trapeze) Wireless Controllers in new class L2::NWSS2300
+    * Support Juniper (Trapeze) Wireless Controllers in new class L2::Trapeze
+    * Support for newer Radware Alteon ADC switches 4408/4416/5412/5224 and
+      older AWS 2000/3000 series in existing L3::AlteonAD
+    * Support for H3C & HP A-series in new class L3::H3C
+    * Support for Citrix Netscaler appliances in new class L7::Netscaler
+    * New configuration option IgnoreNetSNMPConf will ignore Net-SNMP
+      configuration files on object initialization
+    * Two new utilities added in t/util to assist in developing device
+      support; make_snmpdata.pl gathers SNMP data (snmpwalk) in a format that
+      can be used with test_class_mocked.pl which mocks an SNMP agent to
+      enable testing with no network access to a device.
+
+    [ENHANCEMENTS]
+
+    * UNIVERSAL::can() now works with dynamic methods 
+    * Dynamically generated methods are added to symbol table to avoid
+      AUTOLOAD on subsequent calls
+    * L2::Airespace now supports 802.11n client tx rates
+    * L2::Airespace now reports AP Ethernet MAC as port MAC for radio ports
+    * CiscoStats improvements to determine os versions, eg IOS XE ver on Sup7L-E
+    * CiscoStats now reports 'ios-xe' if the device runs IOS XE (used to be 'ios')
+    * Improved support of XOS based Extreme devices
+
+    [BUG FIXES]
+
+    * [3564920] - lldp_if gives wrong data for Enterasys
+
+version 2.11 (2012-12-09)
+
+    [BUG FIXES]
+
+    * Add fall-back for sysDescr on Force10
+
+version 2.10 (2012-12-08)
+
+    [NEW FEATURES]
+
+    * Support for Force10 devices (W. Bulley)
+
+version 2.09 (2012-11-28)
+
+    [NEW FEATURES]
+
+    * New method i_ssidmac() to get BSSID's from AP's with initial support
+      in L2::Aironet and Airespace classes
+    * Support for Avaya Secure Routers in new class L3::Tasman
+    * Add EDP and LLDP L2 Topology to L3::Extreme 
+    * [3185393] Support for Juniper SSL VPN in new class L7::Neoteris
+    * [3381027] Support for Cisco Nexus in new class L3::Nexus   
+    * [1424336] Support for Extreme Discovery Protocol (EDP)
+    
+    [ENHANCEMENTS]
+
+    * [3017571] Add LLDP support for NetSNMP device class (begemot) 
+    * [3418918] Extreme devices now report OS as either extremeware or xos
+    * [2809045] Strip preceding netscreen from model name in L3::Netscreen
+    * [] Classify Linksys 2024 as L3::Dell (Rogier Krieger)
+    
+    [BUG FIXES]
+    
+    * Fixed logic to return cached data for table methods when available and
+      not a partial fetch
+    * Fix typo in PoD for Bridge.pm and CiscoConfig.pm (William Bulley)
+    * Fix/improve IPv6 neighbor cache handling, especially for Cisco Nexus
+
 version 2.08 (2012-07-15)
 
     [NEW FEATURES]

DeviceMatrix.txt

@@ -4,26 +4,25 @@
 # This file is meant to detail the cababilities
 # of network devices to supply data via SNMP.  
 
-# $Id$
-
 #
 # Airespace (pre-Cisco)
 #
 device-vendor: Airespace
-cdp:no
-arpnip: no
-macsuck: yes
-portmac: yes
+arpnip: yes
+topo:no
 duplex: both
-vlan: yes
+macsuck: yes
 modules: yes
+portmac: yes
+vlan: yes
 class: Layer2::Airespace
 
 device-family: Airespace Wireless Controllers
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
 note: Device will only communicate with SNMP version configured in the controller.
 
-device: 3500, 4101, 4102
+device: All
 
 #
 # Alcatel-Lucent
@@ -46,7 +45,7 @@ device: All
 # Allied
 #
 device-vendor: Allied Telesis
-cdp:no
+topo:no
 class: Layer1::Allied
 ver: 1
 arpnip: no
@@ -63,13 +62,27 @@ ver: 2
 macsuck: yes
 device: All
 
+#
+# Alteon
+#
+device-vendor: Alteon
+note: See Radware
+
 #
 # Altiga
 #
 device-vendor: Altiga
-class: Layer3::Altiga
 note: See Cisco/Altiga
 
+#
+# APC
+#
+device-vendor: APC
+class: Layer7::APC
+device-family: UPS
+device: All
+note:  Must be SNMP management enabled.
+
 #
 # Arista
 #
@@ -88,8 +101,11 @@ portmac: yes
 duplex: no
 class: Layer3::Aruba
 
-device-family: Aruba Wireless Controllers
+device-family: Aruba Wireless Controllers and LAN switches
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: On LAN switches, hosts connected to "trusted" switch ports in "access" mode may be mapped to incorrect ports.
+
+device: 3500
 
 device: 5000
 
@@ -109,17 +125,242 @@ device-family: Asante Hubs
 
 device: 1012
 
+#
+# Avaya
+#
+device-vendor: Avaya
+macsuck: yes
+topo: yes
+
+device-family: BayStack Hub
+duplex: both
+ver: 1
+modules: yes
+class: Layer1::Bayhub
+note: Uses proprietary MIBs to provide MAC to port mapping.
+note: !Requires Advanced or Advanced Analyzer NMM
+
+device: 102
+
+device: System 5000
+
+device-family: Ethernet Switch/Baystack Switch
+macsuck: yes
+duplex: both
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: 303, 304, 350, 380, 410, 420, 425, 460, 470
+
+device: 450
+note: !Some versions > 4.X in stacked configuration have SNMP timeout issues. 
+note: Labels full duplex as 20Mbit connection.
+
+device: Business Policy Switch (BPS)
+
+device-family: Ethernet Routing Switch
+arpnip: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: 2500, 3500, 4500, 4800, 5500, and 5600 series
+
+device-family: Virtual Services Platform (VSP) 7000 
+arpnip: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: 7024
+
+device-family: Business Ethernet Switch
+arpnip: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: All 
+
+device-family: Centillion
+duplex: both
+vlan: yes
+class: Layer2::Centillion
+note: !Must be on version 4.x or 5.x (VLAN based) software.
+
+device: C50, C100, 5000BH, and 5005BH
+
+device-family: AP222x
+duplex: both
+modules: no
+class: Layer2::NAP222x
+note: !Upgrade to version 1.3 or higher.
+note: Sends out topology packets if enabled but does not build neighbor table.
+
+device: AP-2220, AP-2221
+
+device-family: Multiprotocol Router/BayRS
+arpnip: yes
+portmac: yes
+duplex: both
+topo: no
+vlan: yes
+modules: yes
+class: Layer3::BayRS
+
+device: AN, ARN, ASN, BLN, BCN, 2430, and 5430
+
+device-family: Secure Router
+arpnip: yes
+portmac: yes
+duplex: no
+topo: no
+vlan: no
+modules: no
+class: Layer3::Tasman
+
+device: 1001/1001S,1002,1004,2330,3120,4134
+
+device-family: VPN Router/Contivity
+arpnip: yes
+macsuck: no
+portmac: yes
+duplex: no
+topo: no
+modules: yes
+class: Layer3::Contivity
+
+device: All
+
+device-family: Ethernet Routing Switch/Passport/Accelar LAN
+arpnip: yes
+portmac: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer3::Passport
+note: !8600 Code versions < 3.2 vlan based mac-suck and are unsupported.  Upgrade code.
+note: !8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop.  Upgrade code.
+
+device: 8100, 8300, 8600, and 8800 series 
+
+device: Passport 1600 series
+note: Software >= 2.1
+
+device: Accelar 1050,1100,1150,1200
+
+device-family: Virtual Services Platform (VSP) 9000
+arpnip: yes
+portmac: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer3::Passport
+
+device: 9000
+
+device-family: Ethernet Routing Switch/Passport 1600 (Software < 2.1)
+arpnip: yes
+portmac: yes
+duplex: both
+vlan: write
+class: Layer3::N1600
+
+device: 1612,1624,1648
+
+device-family: Synoptics
+duplex: both
+ver: 1
+class: Layer1::S3000
+note: Uses proprietary MIBs to provide MAC to port mapping.
+note: !Requires Advanced or Advanced Analyzer NMM
+
+device: 281X
+
+device: System 3000
+
+device-family: Wireless Switch 2270
+arpnip: yes
+duplex: both
+modules: yes
+portmac: yes
+vlan: yes
+class: Layer2::N2270
+note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
+
+device: 2270
+
+device-family: Wireless Security Switches 2300 Series 
+arpnip: yes
+portmac: yes
+duplex: both
+topo: no
+modules: yes
+class: Layer2::NWSS2300
+note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
+
+device: All
+
 #
 # Bay
 #
 device-vendor: Bay
-note: See Nortel
+note: See Avaya
+
+#
+# Brocade
+#
+device-vendor: Brocade
+arpnip: yes
+topo: yes
+duplex: link
+macsuck: yes
+modules: no
+portmac: yes
+vlan: yes
+class: Layer3::Foundry
+
+device-family: EdgeIron
+device: EdgeIron 24G
+note: Bug where spanning tree stuff loops forever when polled by SNMP.
+
+device-family: FastIron
+ver: 1
+note: Support very limited
+device: FastIron 4802
+
+device-family: FastIron CX (ICX) series
+device: 6430,6450,6610
+
+device-family: FastIron LS (FLS) series
+device: All
+
+device-family: FastIron WorkGroup Switch (FWS) series
+device: All
+
+device-family: ServerIron GT series
+device: All
+
+#
+# Bluecoat
+#
+device-vendor: Bluecoat
+class: Layer3::Bluecoat
+
+device-family: BlueCoat SG Series
+device: All
 
 #
 # CISCO
 #
 device-vendor: Cisco
-cdp: yes
+topo: yes
 ver: 2
 modules: yes
 
@@ -143,6 +384,10 @@ class: Layer3::Altiga
 device: VPN3000
 note: The Cisco 3000 device can return duplicate interface names, while Netdisco expects unique interface names.  To ensure unique device names I append numbers only when an interface name would not be unique without one. Interfaces with unique names keep their ifDescr name.
 
+device: ASA
+note: The Cisco ASA is the successor of the PIX which was bought from Altiga Networks.
+Class: Layer3::CiscoASA
+
 device-family: 1000
 duplex: no
 ver: 1
@@ -391,15 +636,16 @@ device: VG200
 
 device-family: Wireless Controllers
 class: Layer2::Airespace
-cdp:no
-arpnip: no
+arpnip: yes
+duplex: both
 macsuck: yes
 portmac: yes
-duplex: both
+vlan: yes
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
 note: Device will only communicate with SNMP version configured in the controller.
 
-device: 2006, 4112, 4124, 4136, 4402, 4404
+device: 2000, 2100, 2500, 4100, 4400, and 5500 series
 
 device-family: Firewall
 class: Layer3::Cisco
@@ -411,6 +657,28 @@ note: !Arpnip only available for 4.x software releases.
 class: Layer3::CiscoFWSM
 arpnip: yes
 
+device: Sx300, Sx500 series
+device-family: Small Business switches
+class: Layer2::CiscoSB
+arpnip: no
+macsuck: yes
+
+#
+# Citrix
+#
+device-vendor: Citrix
+arpnip: no
+topo: no
+duplex: no
+macsuck: no
+modules: no
+portmac: yes
+vlan: no
+class: Layer7::Netscaler
+
+device-family: Netscaler
+device: All
+
 #
 # Cyclades
 #
@@ -427,7 +695,7 @@ arpnip: no
 macsuck: yes
 duplex: both
 vlan: yes
-cdp: no
+topo: yes
 modules: yes
 class: Layer3::Dell
 
@@ -455,7 +723,7 @@ arpnip: yes
 macsuck: yes
 duplex: both
 vlan: yes
-cdp: yes
+topo: yes
 modules: yes
 class: Layer3::Enterasys
 
@@ -472,62 +740,37 @@ device: Matrix N-Series DFE
 #
 device-vendor: Extreme Networks
 arpnip: yes
-macsuck: yes
+topo: yes
 duplex: both
-vlan: yes
-cdp: no
+macsuck: yes
 modules: yes
+portmac: yes
+vlan: yes
 class: Layer3::Extreme
 
-device-family: Alpine and Summit
+device-family: ExtremeWare based devices
+device: All
 
-device: Alpine 3808
-device: Summit 7i, 48si
+device-family: XOS based devices
+device: All
 
 #
 # FreeBSD
 #
 device-vendor: FreeBSD
-device-famly: Pf
-class: Layer3::Pf
 arpnip: yes
-cdp: no
+topo: no
+class: Layer3::Pf
+
 note: LLDP support might be available. See note in Layer3::Pf
+device-family: Pf
+device: All
 
 #
 # Foundry
 #
 device-vendor: Foundry Networks
-vlan: yes
-modules: no
-
-device-family: FastIron
-class: Layer3::Foundry
-ver: 1
-note: Support very limited
-
-device: FastIron 4802
-
-device-family: EdgeIron
-ver: 2
-class: Layer3::Foundry
-cdp: yes
-duplex: yes
-macsuck: yes
-device: EdgeIron 24G
-note: Bug where spanning tree stuff loops forever when polled by SNMP.
-
-device-family: IronWare
-class: Layer3::Foundry
-ver: 2
-cdp: yes
-note: FDP enabled.
-duplex: yes
-macsuck: yes
-arpnip: yes
-device: FWSX424 
-device: ServerIronGT
-device: FLS624, FLS648
+note: See Brocade
 
 #
 # HP
@@ -542,7 +785,7 @@ class:  Layer2::HP4000
 duplex: both
 macsuck: yes
 arpnip: no
-cdp: yes
+topo: yes
 vlan: write
 note: devices in this class only have CDP support
 note: VLAN info in HP-VLAN MIB
@@ -556,7 +799,7 @@ class:  Layer2::HP
 duplex: both
 macsuck: yes
 arpnip: no
-cdp: yes
+topo: yes
 vlan: write
 note: old firmware versions only have CDP support, more recent have LLDP
 note: VLAN info in Q-BRIDGE-MIB
@@ -569,21 +812,74 @@ device: 3124,3324XL,3400cl,3500,3500yl
 device: 4100GL,4200vl,5300XL,5400yy,5400zl
 device: 6108,6200yl,6400cl,6410cl,6600,6600ml,8200zl
 
-
 #
 # Juniper
 #
 device-vendor: Juniper
 arpnip: yes
+topo: yes
+duplex: link
+macsuck: yes
+modules: yes
+portmac: yes
+vlan: yes
+class: Layer3::Juniper
+
+device-family: EX-series switches
+device: All
+
+device-family: J-series router
+device: All
 
 device-family: M-series router
-class: Layer3::Juniper
 device: All
 
 device-family: NetScreen
+topo: no
+duplex: no
+modules: no
+vlan: no
 class: Layer3::Netscreen
 device: All
 
+device-family: SA-series SSL VPN appliances
+arpnip: no
+topo: no
+duplex: no
+modules: no
+vlan: no
+class: Layer7::Neoteris
+device: All
+
+device-family: SRX-series router
+device: All
+
+device-family: Wireless LAN Controllers (Trapeze)
+duplex: both
+class: Layer2::Trapeze
+note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
+
+device: All
+
+#
+# Kentrox
+#
+device-vendor: Kentrox
+class: Layer2::Kentrox
+
+device-family: Kentrox DataSMART DSU/CSU
+device: All
+
+#
+# Lantronix
+#
+device-vendor: Lantronix
+class: Layer3::Lantronix
+
+device-family: Terminal Servers
+device: All
+
 #
 # Linksys
 #
@@ -600,21 +896,31 @@ device-family: 2048
 class: Layer3::Dell
 device: All
 
-
 #
 # Microsoft
 #
 device-vendor: Microsoft
-device-family: Windows
 class: Layer3::Microsoft
+
+device-family: Windows
 device: Windows Router
 
+#
+# Mikrotik
+#
+device-vendor: Mikrotik
+class: Layer3::Mikrotik
+
+device-family: RouterOS
+device: All
+
 #
 # Netgear
 #
 device-vendor: NetGear
-device-family: Switches
 class: Layer2::Netgear
+
+device-family: Switches
 device: All
 
 #
@@ -623,6 +929,12 @@ device: All
 device-vendor: NetScreen
 note: See Juniper
 
+#
+# Neoteris
+#
+device-vendor: Neoteris
+note: See Juniper
+
 #
 # Net-SNMP
 #
@@ -637,198 +949,20 @@ device:  Linux routers
 device-family: BSD
 device:  BSD routers
 
-#
-# Kentrox
-#
-device-vendor: Kentrox
-note: MIB not yet shipped
-
-device: Kentrox DataSMART DSU/CSU
-
 #
 # NORTEL
 #
 device-vendor: Nortel
-macsuck: yes
-cdp: proprietary
-note: SONMP Discovery Protocol Supported
+note: See Avaya
 
-device-family: BayStack Hub
-duplex: both
-ver: 1
-modules: yes
-class: Layer1::Bayhub
-note: Uses proprietary MIBs to provide MAC to port mapping.
-note: !Requires Advanced or Advanced Analyzer NMM
+#
+# PacketFront
+#
+device-vendor: PacketFront
+class: Layer3::PacketFront
 
-device: 102
-
-device: System 5000
-
-device-family: Ethernet Switch/Baystack Switch
-macsuck: yes
-duplex: both
-vlan: write
-modules: yes
-class: Layer2::Baystack
-
-device: 303, 304, 350, 380, 410, 420, 425, 460, 470
-
-device: 450
-note: !Some versions > 4.X in stacked configuration have SNMP timeout issues. 
-note: Labels full duplex as 20Mbit connection.
-
-device: Business Policy Switch (BPS)
-
-device-family: Ethernet Routing Switch/Baystack Switch
-arpnip: yes
-duplex: write
-vlan: write
-modules: yes
-class: Layer2::Baystack
-
-device: 3510
-
-device: 2526,2550
-
-device: 4524,4526,4548,4550
-
-device: 5510,5520,5530
-
-device-family: Business Ethernet Switch
-arpnip: yes
-duplex: write
-vlan: write
-modules: yes
-class: Layer2::Baystack
-
-device: 50,110,120,210,220,1010,1020 
-
-device-family: Centillion
-duplex: both
-vlan: yes
-class: Layer2::Centillion
-note: !Must be on version 4.x or 5.x (VLAN based) software.
-
-device: 5000BH, 5005BH
-device: C50,C100
-
-device-family: AP222x
-duplex: both
-modules: no
-class: Layer2::NAP222x
-note: !Upgrade to version 1.3 or higher.
-note: Sends out topology packets if enabled but does not build neighbor table.
-
-device: AP-2220, AP-2221
-
-device-family: Alteon AD
-arpnip: yes
-duplex: both
-cdp: no
-vlan: yes
-modules: no
-class: Layer3::AlteonAD
-note: !Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher.
-
-device: AD2,AD3,AD4
-
-device: 180,183,184
-
-device-family: Multiprotocol Router/BayRS
-arpnip: yes
-portmac: yes
-duplex: both
-cdp: no
-vlan: yes
-modules: yes
-class: Layer3::BayRS
-
-device: AN,ARN,ASN,BLN,BCN
-
-device: 2430,5430
-
-device-family: VPN Router/Contivity
-arpnip: yes
-macsuck: no
-portmac: yes
-duplex: no
-cdp: no
-modules: yes
-class: Layer3::Contivity
-
-device: 100,400,600
-
-device: 1000,1010,1050
-
-device: 1500,1600,1700,1740,1750
-
-device: 2500,2600,2700
-
-device: 4500,4600,5000
-
-device-family: Ethernet Routing Switch/Passport/Accelar LAN
-arpnip: yes
-macsuck: yes
-portmac: yes
-duplex: write
-cdp: proprietary
-vlan: write
-modules: yes
-class: Layer3::Passport
-note: !8600 Code versions < 3.2 vlan based mac-suck and are unsupported.  Upgrade code.
-note: !8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop.  Upgrade code.
-
-device: 8603,8606,8610, 8610co, 8106, 8110
-
-device: 1050,1100,1150,1200
-
-device-family: Ethernet Routing Switch/Passport 1600 (Software < 2.1)
-arpnip: yes
-macsuck: yes
-portmac: yes
-duplex: both
-cdp: proprietary
-vlan: write
-class: Layer3::N1600
-
-device: 1612,1624,1648
-
-device-family: Ethernet Routing Switch/Passport 1600 (Software >= 2.1)
-arpnip: yes
-macsuck: yes
-portmac: yes
-duplex: write
-cdp: proprietary
-vlan: write
-class: Layer3::Passport
-
-device: 1612,1624,1648
-
-device-family: Synoptics
-macsuck: yes
-duplex: both
-cdp: proprietary
-ver: 1
-class: Layer1::S3000
-note: Uses proprietary MIBs to provide MAC to port mapping.
-note: !Requires Advanced or Advanced Analyzer NMM
-
-device: 281X
-
-device: System 3000
-
-device-family: Wireless Switch 2270
-arpnip: no
-macsuck: yes
-portmac: yes
-duplex: both
-cdp: proprietary
-modules: yes
-class: Layer2::N2270
-note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
-
-device: 2270
+device-family: DRG
+device: All
 
 #
 # Proxim
@@ -836,7 +970,7 @@ device: 2270
 device-vendor: Proxim
 macsuck: yes
 duplex: no
-cdp: no
+topo: no
 class: Layer2::Orinoco
 
 device-family: Orinoco
@@ -845,6 +979,32 @@ device: AP-1000,AP-2000,AP-4000
 
 device: WavePOINT-II
 
+#
+# Radware
+#
+device-vendor: Radware
+arpnip: yes
+topo: no
+duplex: both
+macsuck: yes
+modules: no
+portmac: yes
+vlan: yes
+class: Layer3::AlteonAD
+
+device-family: Alteon AceDirector and AceSwitch series
+note: !Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher.
+device: All
+
+device-family: Web Switch Module for IBM L2/L3 BladeCenter 
+device: All
+
+device-family: Radware Alteon Application switches (AWS 2000 and 3000 series)
+device: All
+
+device-family: Radware Alteon switches
+device: 4408,4416,5412,5224
+
 # 
 # SonicWALL
 # 
@@ -865,7 +1025,13 @@ device: Sun routers
 # Synoptics
 #
 device-vendor: Synoptics
-note: See Nortel
+note: See Avaya
+
+#
+# Trapeze
+#
+device-vendor: Trapeze
+note: See Juniper
 
 #
 # Zyxel

Info/AMAP.pm

@@ -0,0 +1,341 @@
+# SNMP::Info::AMAP
+#
+# Copyright (c) 2013 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::AMAP;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::LLDP::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::LLDP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS
+    = ( 'ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB' => 'aipAMAPRemDeviceType', );
+
+%GLOBALS = (
+
+);
+
+%FUNCS = (
+
+    # EXTREME-EDP-MIB::extremeEdpTable
+    'amap_rem_sysname' => 'aipAMAPRemHostname',
+);
+
+%MUNGE = ( 'amap_rem_sysname' => \&SNMP::Info::munge_null, );
+
+sub hasAMAP {
+    my $amap = shift;
+
+    my $amap_ip = $amap->aipAMAPIpAddr() || {};
+
+    return 1 if ( scalar( keys %$amap_ip ) );
+
+    return;
+}
+
+# Break up the aipAMAPhostsTable INDEX into MAC and IP address.
+sub _hosts_table_index {
+    my $idx  = shift;
+    my @oids = split( /\./, $idx );
+    my $mac  = join( '.', splice( @oids, 0, 6 ) );
+
+    return ( $mac, join( '.', @oids ) );
+}
+
+# Break up the aipAMAPportConnectionTable INDEX and return MAC
+sub _conn_table_mac {
+    my $idx       = shift;
+    my @oids      = split( /\./, $idx );
+    my $local_idx = shift @oids;
+    my $mac       = join( '.', splice( @oids, 0, 6 ) );
+
+    return ($mac);
+}
+
+# Since we need to get IP Addresses from the aipAMAPhostsTable which has
+# a different index (MAC, IP) than the aipAMAPportConnectionTable which holds
+# the remote device details we create a combined index and skip any
+# IPs which have an address of 0.0.0.0.  Would like to include only one
+# address since they should all originate from the same device, but we don't
+# know if they would all be reachable from the network management application.
+#
+# We don't inplement partials since this is private index function
+sub _amap_index {
+    my $amap = shift;
+
+    my $amap_ip    = $amap->aipAMAPIpAddr()    || {};
+    my $amap_rport = $amap->aipAMAPLocalPort() || {};
+
+    my %amap_index;
+    foreach my $key ( keys %$amap_ip ) {
+        my ( $mac, $ip ) = _hosts_table_index($key);
+
+        next if ( $ip eq '0.0.0.0' );
+        next unless $ip;
+
+        foreach my $idx ( keys %$amap_rport ) {
+            my $c_mac = _conn_table_mac($idx);
+
+            if ( $mac eq $c_mac ) {
+                my $index = "$idx.$ip";
+                $amap_index{$index} = $index;
+            }
+        }
+    }
+    return \%amap_index;
+}
+
+# Break up _amap_index INDEX into local index, MAC, remote index, and
+# IP address
+sub _amap_index_parts {
+    my $idx       = shift;
+    my @oids      = split( /\./, $idx );
+    my $local_idx = shift @oids;
+    my $mac       = join( '.', splice( @oids, 0, 6 ) );
+    my $rem_idx   = shift @oids;
+
+    return ( $local_idx, $mac, $rem_idx, join( '.', @oids ) );
+}
+
+sub amap_if {
+    my $amap = shift;
+
+    my $index  = $amap->_amap_index()         || {};
+    my $if_idx = $amap->aipAMAPLocalIfindex() || {};
+
+    my %amap_if;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $if_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$if_key/ ) {
+            my $if = $if_idx->{$if_key};
+            $amap_if{$key} = $if;
+        }
+    }
+
+    return \%amap_if;
+}
+
+sub amap_ip {
+    my $amap = shift;
+
+    my $index = $amap->_amap_index() || {};
+
+    my %amap_ip;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+
+        # MIB says should only be IPv4
+        next unless ( $ip =~ /\d+(\.\d+){3}/ );
+        $amap_ip{$key} = $ip;
+    }
+    return \%amap_ip;
+}
+
+sub amap_port {
+    my $amap = shift;
+
+    my $index      = $amap->_amap_index()      || {};
+    my $amap_rport = $amap->aipAMAPLocalPort() || {};
+    my $amap_rslot = $amap->aipAMAPLocalSlot() || {};
+
+    my %amap_port;
+    foreach my $key ( sort keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $p_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$p_key/ ) {
+            my $port = $amap_rport->{$p_key};
+            my $slot = $amap_rslot->{$p_key} || 0;
+            next unless $port;
+            $amap_port{$key} = defined $slot ? "$slot\/$port" : $port;
+        }
+    }
+    return \%amap_port;
+}
+
+sub amap_id {
+    my $amap = shift;
+
+    my $index     = $amap->_amap_index()      || {};
+    my $amap_name = $amap->amap_rem_sysname() || {};
+
+    my %amap_name;
+    foreach my $key ( sort keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $id_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$id_key/ ) {
+            my $name = $amap_name->{$id_key} || 0;
+            next unless $name;
+            $amap_name{$key} = $name;
+        }
+    }
+    return \%amap_name;
+}
+
+sub amap_platform {
+    my $amap = shift;
+
+    my $index              = $amap->_amap_index()          || {};
+    my $amap_topo_platform = $amap->aipAMAPRemDeviceType() || {};
+
+    my %amap_platform;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $pf_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$pf_key/ ) {
+            my $platform = $amap_topo_platform->{$pf_key};
+            next unless $platform;
+            $amap_platform{$key} = $platform;
+        }
+    }
+    return \%amap_platform;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::AMAP - SNMP Interface to Alcatel Mapping Adjacency Protocol (AMAP)
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ my $amap = new SNMP::Info ( 
+                             AutoSpecify => 1,
+                             Debug       => 1,
+                             DestHost    => 'router', 
+                             Community   => 'public',
+                             Version     => 2
+                           );
+
+ my $class = $amap->class();
+ print " Using device sub class : $class\n";
+
+ $hasamap   = $amap->hasAMAP() ? 'yes' : 'no';
+
+ # Print out a map of device ports with LLDP neighbors:
+ my $interfaces    = $amap->interfaces();
+ my $amap_if       = $amap->amap_if();
+ my $amap_ip       = $amap->amap_ip();
+ my $amap_port     = $amap->amap_port();
+
+ foreach my $amap_key (keys %$amap_ip){
+    my $iid           = $amap_if->{$amap_key};
+    my $port          = $interfaces->{$iid};
+    my $neighbor      = $amap_ip->{$amap_key};
+    my $neighbor_port = $amap_port->{$amap_key};
+    print "Port : $port connected to $neighbor / $neighbor_port\n";
+ }
+
+=head1 DESCRIPTION
+
+SNMP::Info::AMAP is a subclass of SNMP::Info that provides an object oriented 
+interface to Alcatel Mapping Adjacency Protocol (AMAP) information through
+SNMP.
+
+AMAP is a Layer 2 protocol that allows a network device to advertise its
+identity and capabilities on the local network providing topology information.
+
+Create or use a device subclass that inherits this class.  Do not use
+directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB>
+
+=back
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $amap->hasAMAP()
+
+Is AMAP is active in this device?  
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $amap->amap_id()
+
+Returns the string value used to identify the remote system.
+
+=item $amap->amap_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item  $amap->amap_ip()
+
+Returns remote IPv4 addresses.  Note: AMAP returns all IP addresses associated
+with the remote device.  It would be preferable to include only one address
+since they should all originate from the same device, but amap_ip() can not 
+determine if all addresses are reachable from the network management
+application therefore all addresses are returned and the calling application
+must determine which address to use and if they are in fact from the same
+device.
+
+=item $amap->amap_port()
+
+Returns remote port ID
+
+=item $amap->amap_platform()
+
+Returns remote platform ID
+
+=back
+
+=cut

Info/AdslLine.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'ADSL-LINE-MIB' => 'adslLineType' );
 
@@ -65,7 +65,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::AdslLine - SNMP Interface to the ADSL-LINE-MIB
+SNMP::Info::AdslLine - SNMP Interface to the F<ADSL-LINE-MIB>
 
 =head1 AUTHOR
 
@@ -120,7 +120,7 @@ MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
 =head2 ATUC channel table (C<adslAtucChanTable>)
 
 This table provides one row for each ATUC channel.
-ADSL channel interfaces are those ifEntries where ifType
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
 is equal to adslInterleave(124) or adslFast(125).
 
 =over
@@ -146,7 +146,7 @@ is equal to adslInterleave(124) or adslFast(125).
 =head2 ATUR channel table (C<adslAturChanTable>)
 
 This table provides one row for each ATUR channel.
-ADSL channel interfaces are those ifEntries where ifType
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
 is equal to adslInterleave(124) or adslFast(125).
 
 =over

Info/Airespace.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -148,6 +148,16 @@ $VERSION = '2.08';
     # AIRESPACE-SWITCHING-MIB::agentPortConfigTable
     'airespace_duplex_admin' => 'agentPortPhysicalMode',
     'airespace_duplex'       => 'agentPortPhysicalStatus',
+
+    # This needs to be cleaned up, but for now we pretend to
+    # have the CISCO-DOT11-MIB for signal strengths, etc.
+    'cd11_sigstrength' => 'bsnMobileStationRSSI', # kinda
+    'cd11_sigqual'     => 'bsnMobileStationSnr',  # kinda
+    'cd11_rxbyte'      => 'bsnMobileStationBytesReceived',
+    'cd11_txbyte'      => 'bsnMobileStationBytesSent',
+    'cd11_rxpkt'       => 'bsnMobileStationPacketsReceived',
+    'cd11_txpkt'       => 'bsnMobileStationPacketsSent',
+    'cd11_ssid'        => 'bsnMobileStationSsid',
 );
 
 %MUNGE = (
@@ -158,6 +168,8 @@ $VERSION = '2.08';
     'airespace_bl_mac'      => \&SNMP::Info::munge_mac,
     'airespace_if_mac'      => \&SNMP::Info::munge_mac,
     'airespace_sta_mac'     => \&SNMP::Info::munge_mac,
+    'cd11_rxpkt'            => \&munge_64bits,
+    'cd11_txpkt'            => \&munge_64bits,
 );
 
 sub layers {
@@ -421,11 +433,12 @@ sub i_mac {
             next unless defined $mac;
             $i_mac{$iid} = $mac;
         }
-
-        # Don't grab AP MACs - we want the AP to show up on edge switch
-        # ports
+        elsif ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+            $index =~ s/\.\d+$//;
+            next unless defined $index;
+            $i_mac{$iid} = $index;
+        }
         # Some switch interfaces have MACs, virtuals report 00:00:00:00:00:00
-
         else {
             my $mac = $if_mac->{$iid};
             next unless defined $mac;
@@ -659,6 +672,60 @@ sub i_ssidbcast {
     return \%i_ssidbcast;
 }
 
+# Secret decoder ring for BSSID: https://supportforums.cisco.com/docs/DOC-2935
+# We need radio base MAC, SSID index, radio band, and whether AP is
+# VxWorks or IOS based then we can do the arithmetic
+
+sub i_ssidmac {
+    my $airespace = shift;
+    my $partial   = shift;
+
+    my $ssidlist  = $airespace->i_ssidlist($partial)  || {};
+    my $apif_type = $airespace->airespace_apif_type() || {};
+    my $ap_ios    = $airespace->bsnAPIOSVersion()     || {};
+
+    my %i_ssidmac;
+    foreach my $oid ( keys %$ssidlist ) {
+
+        my @parts    = split( /\./, $oid );
+        my $ssid_idx = pop (@parts);
+        my $slot     = pop (@parts);
+        my $last     = pop (@parts);
+
+        my $iid = $oid;
+        # Get radio band
+        $iid =~ s/\.\d+$//;
+        my $ap_type = $apif_type->{$iid};
+        # Determine if IOS based
+        $iid =~ s/\.\d+$//;
+        my $ios = $ap_ios->{$iid} || '';
+        
+        # Four cases:
+        # IOS and 2.4Ghz count up, starts at zero
+        if ($ios and $ap_type =~ /b$/) {
+            $last = $last + ($ssid_idx - 1);
+        }
+        # IOS and 5Ghz - count down from maximum of 16
+        elsif ($ios and $ap_type =~ /a$/) {
+            $last = $last + (16 - $ssid_idx);
+        }
+        # VxWorks and 5Ghz - count up, starts at zero
+        elsif ($ios and $ap_type =~ /a$/) {
+            $last = $last + ($ssid_idx - 1);
+        }
+        # VxWorks and 2.4Ghz - count down from maximum of 16
+        else {
+            $last = $last + (16 - $ssid_idx);
+        }
+        
+       push (@parts, $last);
+       my $bssid = join( ':', map { sprintf( "%02x", $_ ) } @parts );
+       $i_ssidmac{$oid} = $bssid;
+    }
+
+   return \%i_ssidmac;
+}
+
 sub i_80211channel {
     my $airespace = shift;
     my $partial   = shift;
@@ -976,6 +1043,13 @@ sub at_netaddr {
     return $ret;
 }
 
+sub munge_64bits {
+    # The controller sometimes hands off a ridiculous value for packets.
+    # Just truncate it to 32 bits.
+    my $value = shift;
+    return $value & 0xffffffff;
+}
+
 1;
 __END__
 
@@ -1025,7 +1099,7 @@ Do not use directly.
 
 =over
 
-None.
+=item None.
 
 =back
 
@@ -1151,12 +1225,9 @@ switch.
 
 =item $airespace->layers()
 
-Returns 00000011.  Class emulates Layer 2 functionality for Thin APs through
+Returns 00000111.  Class emulates Layer 2 functionality for Thin APs through
 proprietary MIBs.
 
-=item $airespace->at_netaddr()
-=item $airespace->at_paddr()
-
 =item $airespace->serial()
 
 (C<agentInventorySerialNumber>)
@@ -1183,11 +1254,16 @@ Returns reference to hash.  Indicates whether the SSID is broadcast.
 Returns reference to hash.  Current operating frequency channel of the radio
 interface.
 
-=item $dot11->dot11_cur_tx_pwr_mw()
+=item $airespace->dot11_cur_tx_pwr_mw()
 
 Returns reference to hash.  Current transmit power, in milliwatts, of the
 radio interface.
 
+=item $airespace->i_ssidmac()
+
+With the same keys as i_ssidlist, returns the Basic service set
+identification (BSSID), MAC address, the AP is using for the SSID. 
+
 =back
 
 =head2 Dot11 Ess Table  (C<bsnDot11EssTable>)
@@ -1599,15 +1675,15 @@ airespace_if_name() for virtual interfaces.
 
 =item $airespace->i_description()
 
-Returns reference to map of IIDs to interface types.  Returns C<ifDescr>
-for Ethernet interfaces, airespace_ap_loc() for thin AP interfaces, and
-airespace_if_name() for virtual interfaces.
+Returns reference to map of IIDs to interface descriptions.  Returns
+C<ifDescr> for Ethernet interfaces, airespace_ap_loc() for thin AP
+interfaces, and airespace_if_name() for virtual interfaces.
 
 =item $airespace->i_type()
 
-Returns reference to map of IIDs to interface descriptions.  Returns
-C<ifType> for Ethernet interfaces, airespace_apif_type() for thin AP
-interfaces, and airespace_if_type() for virtual interfaces.
+Returns reference to map of IIDs to interface types.  Returns C<ifType>
+for Ethernet interfaces, airespace_apif_type() for thin AP interfaces, and
+airespace_if_type() for virtual interfaces.
 
 =item $airespace->i_up()
 
@@ -1730,4 +1806,32 @@ entity which 'contains' this entity.
 
 =back
 
+=head2 Arp Cache Table Augmentation
+
+The controller has knowledge of MAC->IP mappings for wireless clients.
+Augmenting the arp cache data with these MAC->IP mappings enables visibility
+for stations that only communicate locally.
+
+=over
+
+=item $airespace->at_paddr()
+
+Adds MAC addresses extracted from the index of C<bsnMobileStationIpAddress>.
+
+=item $airespace->at_netaddr()
+
+Adds IP addresses from C<bsnMobileStationIpAddress>.
+
+=back
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item munge_64bits()
+
+Truncate packet values to 32 bits.
+
+=back
+
 =cut

Info/Bridge.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     'BRIDGE-MIB'   => 'dot1dBaseBridgeAddress',
@@ -158,6 +158,19 @@ sub qb_fw_mac {
     return $qb_fw_mac;
 }
 
+sub qb_fw_vlan {
+    my $bridge  = shift;
+    my $partial = shift;
+
+    my $qb_fw_port = $bridge->qb_fw_port($partial);
+    my $qb_fw_vlan = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _qb_fdbtable_index($idx);
+        $qb_fw_vlan->{$idx} = $fdb_id;
+    }
+    return $qb_fw_vlan;
+}
+
 sub qb_i_vlan_t {
     my $bridge  = shift;
     my $partial = shift;
@@ -631,7 +644,7 @@ identifier (iid)
 
 Returns reference to hash of forwarding table entries status
 
-(C<dot2dTpFdbStatus>)
+(C<dot1dTpFdbStatus>)
 
 =back
 
@@ -855,6 +868,10 @@ identifier (iid)
 
 (C<dot1qTpFdbPort>)
 
+=item $bridge->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
 =item $bridge->qb_fw_status()
 
 Returns reference to hash of forwarding table entries status
@@ -888,4 +905,6 @@ Currently unsupported.  Throws an error and returns.
 
 Currently unsupported.  Throws an error and returns.
 
+=back
+
 =cut

Info/CDP.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 # Five data structures required by SNMP::Info
 %MIBS = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' );
@@ -53,37 +53,37 @@ $VERSION = '2.08';
     'cdp_run'      => 'cdpGlobalRun',
     'cdp_interval' => 'cdpGlobalMessageInterval',
     'cdp_holdtime' => 'cdpGlobalHoldTime',
-    'cdp_id'       => 'cdpGlobalDeviceId',
+    'cdp_gid'       => 'cdpGlobalDeviceId',
 );
 
 %FUNCS = (
-    'c_index'        => 'cdpCacheIfIndex',
-    'c_proto'        => 'cdpCacheAddressType',
-    'c_addr'         => 'cdpCacheAddress',
-    'c_ver'          => 'cdpCacheVersion',
-    'c_id'           => 'cdpCacheDeviceId',
-    'c_port'         => 'cdpCacheDevicePort',
-    'c_platform'     => 'cdpCachePlatform',
-    'c_capabilities' => 'cdpCacheCapabilities',
-    'c_domain'       => 'cdpCacheVTPMgmtDomain',
-    'c_vlan'         => 'cdpCacheNativeVLAN',
-    'c_duplex'       => 'cdpCacheDuplex',
-    'c_power'        => 'cdpCachePowerConsumption',
-    'c_pri_mgmt_type'=> 'cdpCachePrimaryMgmtAddrType',
-    'c_pri_mgmt_addr'=> 'cdpCachePrimaryMgmtAddr',
-    'c_sec_mgmt_type'=> 'cdpCacheSecondaryMgmtAddrType',
-    'c_sec_mgmt_addr'=> 'cdpCacheSecondaryMgmtAddr',
+    'cdp_index'        => 'cdpCacheIfIndex',
+    'cdp_proto'        => 'cdpCacheAddressType',
+    'cdp_addr'         => 'cdpCacheAddress',
+    'cdp_ver'          => 'cdpCacheVersion',
+    'cdp_id'           => 'cdpCacheDeviceId',
+    'cdp_port'         => 'cdpCacheDevicePort',
+    'cdp_platform'     => 'cdpCachePlatform',
+    'cdp_capabilities' => 'cdpCacheCapabilities',
+    'cdp_domain'       => 'cdpCacheVTPMgmtDomain',
+    'cdp_vlan'         => 'cdpCacheNativeVLAN',
+    'cdp_duplex'       => 'cdpCacheDuplex',
+    'cdp_power'        => 'cdpCachePowerConsumption',
+    'cdp_pri_mgmt_type'=> 'cdpCachePrimaryMgmtAddrType',
+    'cdp_pri_mgmt_addr'=> 'cdpCachePrimaryMgmtAddr',
+    'cdp_sec_mgmt_type'=> 'cdpCacheSecondaryMgmtAddrType',
+    'cdp_sec_mgmt_addr'=> 'cdpCacheSecondaryMgmtAddr',
 );
 
 %MUNGE = (
-    'c_capabilities' => \&SNMP::Info::munge_caps,
-    'c_platform'     => \&SNMP::Info::munge_null,
-    'c_domain'       => \&SNMP::Info::munge_null,
-    'c_port'         => \&SNMP::Info::munge_null,
-    'c_id'           => \&SNMP::Info::munge_null,
-    'c_ver'          => \&SNMP::Info::munge_null,
-    'c_ip'           => \&SNMP::Info::munge_ip,
-    'c_power'        => \&munge_power,
+    'cdp_capabilities' => \&SNMP::Info::munge_caps,
+    'cdp_platform'     => \&SNMP::Info::munge_null,
+    'cdp_domain'       => \&SNMP::Info::munge_null,
+    'cdp_port'         => \&SNMP::Info::munge_null,
+    'cdp_id'           => \&SNMP::Info::munge_null,
+    'cdp_ver'          => \&SNMP::Info::munge_null,
+    'cdp_ip'           => \&SNMP::Info::munge_ip,
+    'cdp_power'        => \&munge_power,
 
 );
 
@@ -101,63 +101,63 @@ sub hasCDP {
 
     # SNMP v1 clients dont have the globals
     if ( defined $ver and $ver == 1 ) {
-        my $c_ip = $cdp->c_ip();
+        my $cdp_ip = $cdp->cdp_ip();
 
         # See if anything in cdp cache, if so we have cdp
-        return 1 if ( defined $c_ip and scalar( keys %$c_ip ) );
+        return 1 if ( defined $cdp_ip and scalar( keys %$cdp_ip ) );
         return;
     }
 
     return $cdp->cdp_run();
 }
 
-sub c_if {
+sub cdp_if {
     my $cdp = shift;
 
     # See if by some miracle Cisco implemented the cdpCacheIfIndex entry
-    my $c_index = $cdp->c_index();
-    return $c_index if defined $c_index;
+    my $cdp_index = $cdp->cdp_index();
+    return $cdp_index if defined $cdp_index;
 
     # Nope, didn't think so. Now we fake it.
-    my $c_ip = $cdp->c_ip();
-    unless ( defined $c_ip ) {
+    my $cdp_ip = $cdp->cdp_ip();
+    unless ( defined $cdp_ip ) {
         $cdp->error_throw(
-            "SNMP::Info::CDP:c_if() - Device doesn't have cdp_ip() data.  Can't fake cdp_index()"
+            "SNMP::Info::CDP:cdp_if() - Device doesn't have cdp_ip() data.  Can't fake cdp_index()"
         );
         return;
     }
 
-    my %c_if;
-    foreach my $key ( keys %$c_ip ) {
+    my %cdp_if;
+    foreach my $key ( keys %$cdp_ip ) {
         next unless defined $key;
         my $iid = $key;
 
         # Truncate .1 from cdp cache entry
         $iid =~ s/\.\d+$//;
-        $c_if{$key} = $iid;
+        $cdp_if{$key} = $iid;
     }
 
-    return \%c_if;
+    return \%cdp_if;
 }
 
-sub c_ip {
+sub cdp_ip {
     my $cdp     = shift;
     my $partial = shift;
 
-    my $c_addr  = $cdp->c_addr($partial)  || {};
-    my $c_proto = $cdp->c_proto($partial) || {};
+    my $cdp_addr  = $cdp->cdp_addr($partial)  || {};
+    my $cdp_proto = $cdp->cdp_proto($partial) || {};
 
-    my %c_ip;
-    foreach my $key ( keys %$c_addr ) {
-        my $addr  = $c_addr->{$key};
-        my $proto = $c_proto->{$key};
+    my %cdp_ip;
+    foreach my $key ( keys %$cdp_addr ) {
+        my $addr  = $cdp_addr->{$key};
+        my $proto = $cdp_proto->{$key};
         next unless defined $addr;
         next if ( defined $proto and $proto ne 'ip' );
 
         my $ip = join( '.', unpack( 'C4', $addr ) );
-        $c_ip{$key} = $ip;
+        $cdp_ip{$key} = $ip;
     }
-    return \%c_ip;
+    return \%cdp_ip;
 }
 
 1;
@@ -188,15 +188,15 @@ Max Baker
 
  # Print out a map of device ports with CDP neighbors:
  my $interfaces = $cdp->interfaces();
- my $c_if       = $cdp->c_if();
- my $c_ip       = $cdp->c_ip();
- my $c_port     = $cdp->c_port();
+ my $cdp_if       = $cdp->cdp_if();
+ my $cdp_ip       = $cdp->cdp_ip();
+ my $cdp_port     = $cdp->cdp_port();
 
- foreach my $cdp_key (keys %$c_ip){
-    my $iid           = $c_if->{$cdp_key};
+ foreach my $cdp_key (keys %$cdp_ip){
+    my $iid           = $cdp_if->{$cdp_key};
     my $port          = $interfaces->{$iid};
-    my $neighbor      = $c_ip->{$cdp_key};
-    my $neighbor_port = $c_port->{$cdp_key};
+    my $neighbor      = $cdp_ip->{$cdp_key};
+    my $neighbor_port = $cdp_port->{$cdp_key};
     print "Port : $port connected to $neighbor / $neighbor_port\n";
  }
 
@@ -260,7 +260,7 @@ Time in seconds that CDP messages are kept.
 
 (C<cdpGlobalHoldTime>)
 
-=item  $cdp->cdp_id() 
+=item  $cdp->cdp_gid() 
 
 Returns CDP device ID.  
 
@@ -280,7 +280,7 @@ to a hash.
 
 =over
 
-=item $cdp->c_capabilities()
+=item $cdp->cdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
 binary string, 7 digits long, MSB.  Each digit represents a bit from the
@@ -319,108 +319,108 @@ information.
 
 (C<cdpCacheCapabilities>)
 
-=item $cdp->c_domain()
+=item $cdp->cdp_domain()
 
 Returns remote VTP Management Domain as defined in
 C<CISCO-VTP-MIB::managementDomainName>
 
 (C<cdpCacheVTPMgmtDomain>)
 
-=item $cdp->c_duplex() 
+=item $cdp->cdp_duplex() 
 
 Returns the port duplex status from remote devices.
 
 (C<cdpCacheDuplex>)
 
-=item $cdp->c_id()
+=item $cdp->cdp_id()
 
 Returns remote device id string
 
 (C<cdpCacheDeviceId>)
 
-=item $cdp->c_if()
+=item $cdp->cdp_if()
 
 Returns the mapping to the SNMP Interface Table.
 
-Note that a lot devices don't implement $cdp->c_index(),  So if it isn't
+Note that a lot devices don't implement $cdp->cdp_index(),  So if it isn't
 around, we fake it. 
 
 In order to map the cdp table entry back to the interfaces() entry, we
 truncate the last number off of it :
 
   # it exists, yay.
-  my $c_index     = $device->c_index();
-  return $c_index if defined $c_index;
+  my $cdp_index     = $device->cdp_index();
+  return $cdp_index if defined $cdp_index;
 
   # if not, let's fake it
-  my $c_ip       = $device->c_ip();
+  my $cdp_ip       = $device->cdp_ip();
     
-  my %c_if
-  foreach my $key (keys %$c_ip){
+  my %cdp_if
+  foreach my $key (keys %$cdp_ip){
       $iid = $key;
       ## Truncate off .1 from cdp response
       $iid =~ s/\.\d+$//;
-      $c_if{$key} = $iid;
+      $cdp_if{$key} = $iid;
   }
  
-  return \%c_if;
+  return \%cdp_if;
 
 
-=item $cdp->c_index()
+=item $cdp->cdp_index()
 
 Returns the mapping to the SNMP2 Interface table for CDP Cache Entries. 
 
-Most devices don't implement this, so you probably want to use $cdp->c_if()
+Most devices don't implement this, so you probably want to use $cdp->cdp_if()
 instead.
 
-See c_if() entry.
+See cdp_if() entry.
 
 (C<cdpCacheIfIndex>)
 
-=item  $cdp->c_ip()
+=item  $cdp->cdp_ip()
 
-If $cdp->c_proto() is supported, returns remote IPV4 address only.  Otherwise
+If $cdp->cdp_proto() is supported, returns remote IPV4 address only.  Otherwise
 it will return all addresses.
 
 (C<cdpCacheAddress>)
 
-=item  $cdp->c_addr()
+=item  $cdp->cdp_addr()
 
 Returns remote address
 
 (C<cdpCacheAddress>)
 
-=item $cdp->c_platform() 
+=item $cdp->cdp_platform() 
 
 Returns remote platform id 
 
 (C<cdpCachePlatform>)
 
-=item $cdp->c_port()
+=item $cdp->cdp_port()
 
 Returns remote port ID
 
 (C<cdpDevicePort>)
 
-=item  $cdp->c_proto()
+=item  $cdp->cdp_proto()
 
 Returns remote address type received.  Usually IP.
 
 (C<cdpCacheAddressType>)
 
-=item $cdp->c_ver() 
+=item $cdp->cdp_ver() 
 
 Returns remote hardware version
 
 (C<cdpCacheVersion>)
 
-=item $cdp->c_vlan()
+=item $cdp->cdp_vlan()
 
 Returns the remote interface native VLAN.
 
 (C<cdpCacheNativeVLAN>)
 
-=item $cdp->c_power()
+=item $cdp->cdp_power()
 
 Returns the amount of power consumed by remote device in milliwatts munged
 for decimal placement.

Info/CiscoConfig.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     'CISCO-CONFIG-COPY-MIB' => 'ccCopyTable',
@@ -449,7 +449,7 @@ devices running older code revisions.
 
  Example:
  $ciscoconfig->copy_run_tftp('1.2.3.4', 'myconfig') 
-    or die Couldn't save config. ",$ciscoconfig->error(1);
+    or die "Couldn't save config. ",$ciscoconfig->error(1);
 
 =item $ciscoconfig->copy_run_start()
 

Info/CiscoImage.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'CISCO-IMAGE-MIB' => 'ciscoImageString', );
 

Info/CiscoPortSecurity.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PAECAPABILITIES/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     'CISCO-PORT-SECURITY-MIB' => 'ciscoPortSecurityMIB',

Info/CiscoPower.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'CISCO-POWER-ETHERNET-EXT-MIB' => 'cpeExtPsePortEntPhyIndex',
           'CISCO-CDP-MIB' => 'cdpCachePowerConsumption' );
@@ -175,7 +175,7 @@ Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 =item $poe->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("cpeExtPsePortPwrConsumption")
+(C<cpeExtPsePortPwrConsumption>)
  
 =back
 
@@ -185,8 +185,8 @@ Power supplied by PoE ports, in milliwatts
 
 =item $poe->peth_port_neg_power()
 
-Power negotiated using CDP, in milliwats
-("cdpCachePowerConsumption")
+Power negotiated using CDP, in milliwatts
+(C<cdpCachePowerConsumption>)
 
 =back
 

Info/CiscoQOS.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'CISCO-CLASS-BASED-QOS-MIB' => 'cbQosIfIndex', );
 

Info/CiscoRTT.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'CISCO-RTTMON-MIB' => 'rttMonCtrlAdminOwner', );
 

Info/CiscoStack.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'CISCO-STACK-MIB' => 'ciscoStackMIB', );
 
@@ -215,9 +215,8 @@ sub i_speed_admin {
     my $partial = shift;
 
     my %i_speed_admin;
-    my $p_port  = $stack->p_port() || {};
-    my %mapping = reverse %$p_port;
-    my $p_speed = $stack->p_speed( $mapping{$partial} );
+    my $p_port  = $stack->p_port()  || {};
+    my $p_speed = $stack->p_speed() || {};
 
     my %speeds = (
         'autoDetect'      => 'auto',

Info/CiscoStats.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     'SNMPv2-MIB'            => 'sysDescr',
@@ -51,6 +51,7 @@ $VERSION = '2.08';
     'OLD-CISCO-SYSTEM-MIB'  => 'writeMem',
     'CISCO-PRODUCTS-MIB'    => 'sysName',
     'ENTITY-MIB'            => 'entPhysicalSoftwareRev',
+    'CISCO-IMAGE-MIB'       => 'ciscoImageString',
 
     # some older catalysts live here
     'CISCO-STACK-MIB'                 => 'wsc1900sysID',
@@ -100,13 +101,15 @@ sub os {
     my $descr = $l2->description() || '';
 
     # order here matters - there are Catalysts that run IOS and have catalyst
-    # in their description field.
+    # in their description field, as well as Catalysts that run IOS-XE.
+    return 'ios-xe'   if ( $descr =~ /IOS-XE/ );
     return 'ios'      if ( $descr =~ /IOS/ );
     return 'catalyst' if ( $descr =~ /catalyst/i );
     return 'css'      if ( $descr =~ /Content Switch SW/ );
     return 'css-sca'  if ( $descr =~ /Cisco Systems Inc CSS-SCA-/ );
     return 'pix'      if ( $descr =~ /Cisco PIX Security Appliance/ );
     return 'asa'      if ( $descr =~ /Cisco Adaptive Security Appliance/ );
+    return 'san-os'   if ( $descr =~ /Cisco SAN-OS/ );
 
     if ( $descr =~ /Application Control Engine Service Module/ ) {
         # Only the admin context implements the entity MIB
@@ -203,6 +206,15 @@ sub os_ver {
         return $1;
     }
 
+    # Generic fallback: try to determine running image from CISCO-IMAGE-MIB
+    my $image_info = $l2->ciscoImageString() || {};
+    foreach my $row (keys %$image_info) {
+        my $info_string = $image_info->{$row};
+        if ($info_string =~ /CW_VERSION\$([^\$]+)\$/) {
+            return $1;
+        }
+    }
+
     return;
 }
 
@@ -358,6 +370,8 @@ None.
 
 =item F<ENTITY-MIB>
 
+=item F<CISCO-IMAGE-MIB>
+
 =back
 
 MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
@@ -388,58 +402,34 @@ Returns mem_free() + mem_used()
 
 =item $ciscostats->os()
 
-Tries to parse if device is running IOS or CatOS from description()
+Tries to parse if device is running 'IOS', 'CatOS', 'IOS-XE' or something else
+from description()
 
-Available values :
+Available values:
 
-=over
-
-=item pix
-
-Cisco PIX
-
-=item asa
-
-Cisco ASA
-
-=item fwsm
-
-Single-mode FWSM
-
-=item fwsm-admin
-
-Admin context of multi-context FWSM
-
-=item fwsm-context
-
-Standard context of multi-context FWSM
-
-=item ace-admin
-
-Admin context of ACE module
-
-=item ace-context
-
-Standard context of ACE module (NB: No OS version detection
-is available, but will be the same as it's 'ace admin')
-
-=item css
-
-Cisco Content Switch
-
-=item css-sca
-
-Cisco Content Switch Secure Content Acceleration
-
-=back
+ 'ios'          for Cisco IOS
+ 'ios-xe'       for Cisco IOS XE
+ 'pix'          for Cisco PIX
+ 'asa'          for Cisco ASA
+ 'fwsm'         for Single-mode FWSM
+ 'fwsm-admin'   for Admin context of multi-context FWSM
+ 'fwsm-context' for Standard context of multi-context FWSM
+ 'ace-admin'    for Admin context of ACE module
+ 'ace-context'  for Standard context of ACE module (NB: No OS version
+                     detection is available, but will be the same as it's
+                     'ace admin')
+ 'css'          for Cisco Content Switch
+ 'css-sca'      for Cisco Content Switch Secure Content Acceleration
+ 'san-os'       for Cisco SAN-OS
 
 =item $ciscostats->os_ver()
 
-Tries to parse device operating system version from description()
+Tries to parse device operating system version from description(), falls back
+to parsing C<CISCO-IMAGE-MIB::ciscoImageString> if needed
 
 =item $ciscostats->os_bin()
 
-Tries to parse ROMMON version from rom_id() string
+Tries to parse C<ROMMON> version from rom_id() string
 
 =item $ciscostats->ios_cpu()
 

Info/CiscoStpExtensions.pm

@@ -35,7 +35,9 @@ use SNMP::Info;
 use SNMP::Info::Bridge;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/;
-$VERSION = '2.08';
+
+$VERSION = '3.08';
+
 @SNMP::Info::CiscoStpExtensions::ISA = qw/SNMP::Info::Bridge SNMP::Info Exporter/;
 @SNMP::Info::CiscoStpExtensions::EXPORT_OK = qw//;
 
@@ -75,7 +77,7 @@ $VERSION = '2.08';
 sub stp_ver {
      my $self = shift;
      my $stp_ver = $self->SUPER::stp_ver();
-     if ( $stp_ver eq 'unknown' ){
+     if ( !defined($stp_ver) || $stp_ver eq 'unknown' ){
          if ( defined $self->stpx_stp_type() ){
              $stp_ver = $self->stpx_stp_type();
          }

Info/CiscoVTP.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     'CISCO-VTP-MIB'                       => 'vtpVlanName',

Info/EDP.pm

@@ -0,0 +1,295 @@
+# SNMP::Info::EDP
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+
+package SNMP::Info::EDP;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::LLDP::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::LLDP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    'EXTREME-EDP-MIB'   => 'extremeEdpPortIfIndex',
+);
+
+%GLOBALS = (
+
+);
+
+%FUNCS = (
+    # EXTREME-EDP-MIB::extremeEdpTable
+    'edp_rem_sysname'  => 'extremeEdpNeighborName',
+);
+
+%MUNGE = (
+    'edp_rem_sysname'   => \&SNMP::Info::munge_null,
+);
+
+sub hasEDP {
+    my $edp = shift;
+
+    my $edp_ip = $edp->extremeEdpNeighborVlanIpAddress() || {};
+
+    return 1 if ( scalar( keys %$edp_ip ) );
+    
+    return;
+}
+
+# Since we need to get IP Addresses from the extremeEdpNeighborTable which has
+# a different index (adds VLAN name) than the extremeEdpTable which holds
+# the remote device details use the index from extremeEdpNeighborTable but skip
+# indexes which have an address of 0.0.0.0.  Would like to include only one
+# address since they should all originate from the same device, but we don't
+# know if they would all be reachable from the network management application.
+#
+# We don't inplement partials since this is private index function
+sub _edp_index {
+    my $edp = shift;
+
+    my $edp_ip  = $edp->extremeEdpNeighborVlanIpAddress() || {};
+    
+    my %edp_index;
+    foreach my $key ( keys %$edp_ip ) {
+        my $ip = $edp_ip->{$key};
+        next if ($ip eq '0.0.0.0');
+        next unless $ip;
+        $edp_index{$key} = $key;
+    }
+    return \%edp_index;
+}
+
+sub edp_if {
+    my $edp = shift;
+
+    my $index = $edp->_edp_index() || {};
+
+    my %edp_if;
+    foreach my $key (keys %$index) {
+        my $iid = $key;
+        # ifIndex is first part of the iid
+        $iid = $1 if $iid =~ /^(\d+)\./;
+        $edp_if{$key} = $iid;
+    }
+ 
+  return \%edp_if;
+}
+
+sub edp_ip {
+    my $edp = shift;
+
+    my $index  = $edp->_edp_index() || {};
+    my $edp_ip = $edp->extremeEdpNeighborVlanIpAddress() || {};
+
+    my %edp_ip;
+    foreach my $key ( keys %$index ) {
+        my $ip = $edp_ip->{$key};
+        # MIB says should only be IPv4
+        next unless ($ip =~ /\d+(\.\d+){3}/);
+        $edp_ip{$key} = $ip;
+    }
+    return \%edp_ip;
+}
+
+sub edp_port {
+    my $edp = shift;
+
+    my $index    = $edp->_edp_index() || {};
+    my $edp_rport = $edp->extremeEdpNeighborPort() || {};
+    my $edp_rslot = $edp->extremeEdpNeighborSlot() || {};
+
+    my %edp_port;
+    foreach my $key ( sort keys %$edp_rport ) {
+        my $port = $edp_rport->{$key};
+        my $slot = $edp_rslot->{$key} || 0;
+        next unless $port;
+        my $slotport = defined $slot ?  "$slot\/$port" : $port;
+
+        foreach my $iid ( sort keys %$index ) {
+            $edp_port{$iid} = $slotport if ($iid =~ /^$key/);
+        }
+    }
+    return \%edp_port;
+}
+
+sub edp_id {
+    my $edp = shift;
+
+    my $index    = $edp->_edp_index() || {};
+    my $edp_name = $edp->edp_rem_sysname() || {};
+
+    my %edp_name;
+    foreach my $key ( sort keys %$edp_name ) {
+        my $name = $edp_name->{$key} || 0;
+        next unless $name;
+
+        foreach my $iid ( sort keys %$index ) {
+            $edp_name{$iid} = $name if ($iid =~ /^$key/);
+        }
+    }
+    return \%edp_name;
+}
+
+sub edp_ver {
+    my $edp = shift;
+
+    my $index   = $edp->_edp_index() || {};
+    my $edp_ver = $edp->extremeEdpNeighborSoftwareVersion() || {};
+
+    my %edp_ver;
+    foreach my $key ( sort keys %$edp_ver ) {
+        my $ver = $edp_ver->{$key} || 0;
+        next unless $ver;
+
+        foreach my $iid ( sort keys %$index ) {
+            $edp_ver{$iid} = $ver if ($iid =~ /^$key/);
+        }
+    }
+    return \%edp_ver;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::EDP - SNMP Interface to the Extreme Discovery Protocol (EDP)
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ my $edp = new SNMP::Info ( 
+                             AutoSpecify => 1,
+                             Debug       => 1,
+                             DestHost    => 'router', 
+                             Community   => 'public',
+                             Version     => 2
+                           );
+
+ my $class = $edp->class();
+ print " Using device sub class : $class\n";
+
+ $haslldp   = $edp->hasLLDP() ? 'yes' : 'no';
+
+ # Print out a map of device ports with LLDP neighbors:
+ my $interfaces    = $edp->interfaces();
+ my $edp_if       = $edp->edp_if();
+ my $edp_ip       = $edp->edp_ip();
+ my $edp_port     = $edp->edp_port();
+
+ foreach my $edp_key (keys %$edp_ip){
+    my $iid           = $edp_if->{$edp_key};
+    my $port          = $interfaces->{$iid};
+    my $neighbor      = $edp_ip->{$edp_key};
+    my $neighbor_port = $edp_port->{$edp_key};
+    print "Port : $port connected to $neighbor / $neighbor_port\n";
+ }
+
+=head1 DESCRIPTION
+
+SNMP::Info::EDP is a subclass of SNMP::Info that provides an object oriented 
+interface to EDP information through SNMP.
+
+EDP is a Layer 2 protocol that allows a network device to advertise its
+identity and capabilities on the local network providing topology information.
+
+Create or use a device subclass that inherits this class.  Do not use
+directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<EXTREME-EDP-MIB>
+
+=back
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $edp->hasEDP()
+
+Is EDP is active in this device?  
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $edp->edp_id()
+
+Returns the string value used to identify the chassis component associated
+with the remote system.
+
+(C<extremeEdpNeighborName>)
+
+=item $edp->edp_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item  $edp->edp_ip()
+
+Returns remote IPv4 address.
+
+=item $edp->edp_port()
+
+Returns remote port ID
+
+=item $edp->edp_ver()
+
+Returns the operating system version of the remote system.
+
+Nulls are removed before the value is returned. 
+
+(C<extremeEdpNeighborSoftwareVersion>)
+
+=back
+
+=cut
+

Info/Entity.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'ENTITY-MIB' => 'entPhysicalSerialNum' );
 
@@ -138,7 +138,7 @@ Max Baker
 
 =head1 DESCRIPTION
 
-F<ENTITY-MIB> is used by Layer 2 devices from HP, Aironet, Foundry, Cisco,
+F<ENTITY-MIB> is used by Layer 2 devices from Brocade, Cisco, HP,
 and more.
 
 See RFC 2737 for full details.

Info/EtherLike.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'EtherLike-MIB' => 'etherMIB' );
 

Info/FDP.pm

@@ -42,18 +42,11 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' );
 
 %GLOBALS = (
-
-    # CDP-Compatibility
-    'cdp_interval' => 'snFdpGlobalMessageInterval',
-    'cdp_holdtime' => 'snFdpGlobalHoldTime',
-    'cdp_id'       => 'snFdpGlobalDeviceId',
-
-    #
     'fdp_run'      => 'snFdpGlobalRun',
     'fdp_interval' => 'snFdpGlobalMessageInterval',
     'fdp_holdtime' => 'snFdpGlobalHoldTime',
@@ -61,27 +54,27 @@ $VERSION = '2.08';
 );
 
 %FUNCS = (
-    'c_index'        => 'snFdpCacheIfIndex',
-    'c_proto'        => 'snFdpCacheAddressType',
-    'c_ip'           => 'snFdpCacheAddress',
-    'c_ver'          => 'snFdpCacheVersion',
-    'c_id'           => 'snFdpCacheDeviceId',
-    'c_port'         => 'snFdpCacheDevicePort',
-    'c_platform'     => 'snFdpCachePlatform',
-    'c_capabilities' => 'snFdpCacheCapabilities',
-    'c_domain'       => 'snFdpCacheVTPMgmtDomain',
-    'c_vlan'         => 'snFdpCacheNativeVLAN',
-    'c_duplex'       => 'snFdpCacheDuplex',
+    'fdp_index'        => 'snFdpCacheIfIndex',
+    'fdp_proto'        => 'snFdpCacheAddressType',
+    'fdp_ip'           => 'snFdpCacheAddress',
+    'fdp_ver'          => 'snFdpCacheVersion',
+    'fdp_id'           => 'snFdpCacheDeviceId',
+    'fdp_port'         => 'snFdpCacheDevicePort',
+    'fdp_platform'     => 'snFdpCachePlatform',
+    'fdp_capabilities' => 'snFdpCacheCapabilities',
+    'fdp_domain'       => 'snFdpCacheVTPMgmtDomain',
+    'fdp_vlan'         => 'snFdpCacheNativeVLAN',
+    'fdp_duplex'       => 'snFdpCacheDuplex',
 );
 
 %MUNGE = (
-    'c_capabilities' => \&SNMP::Info::munge_caps,
-    'c_ip'           => \&SNMP::Info::munge_ip
+    'fdp_capabilities' => \&SNMP::Info::munge_caps,
+    'fdp_ip'           => \&SNMP::Info::munge_ip
 );
 
-sub cdp_run {
+sub fdp_run {
     my $fdp     = shift;
-    my $fdp_run = $fdp->fdp_run();
+    my $fdp_run = $fdp->orig_fdp_run();
 
     # if fdp_run isn't implemented on device, assume FDP is on
     return $fdp_run if defined $fdp_run;
@@ -107,7 +100,7 @@ sub hasFDP {
     return $fdp->fdp_run();
 }
 
-sub c_if {
+sub fdp_if {
     my $fdp = shift;
 
     # See if by some miracle Cisco implemented the fdpCacheIfIndex entry
@@ -115,7 +108,7 @@ sub c_if {
     return $fdp_index if defined $fdp_index;
 
     # Nope, didn't think so. Now we fake it.
-    my $fdp_ip = $fdp->c_ip();
+    my $fdp_ip = $fdp->fdp_ip();
     unless ( defined $fdp_ip ) {
         $fdp->error_throw(
             "SNMP::Info::FDP:fdp_if() - Device doesn't have fdp_ip() data.  Can't fake fdp_index()"
@@ -185,8 +178,7 @@ interface to FDP information through SNMP.
 FDP is a Layer 2 protocol that supplies topology information of
 devices that also speak FDP, mostly switches and routers.  It has
 similar functionality to Cisco's CDP, and the SNMP interface is
-virtually identical.  FDP is implemented in Foundry devices, including
-the Bigiron and Fastiron range.
+virtually identical.  FDP is implemented in Brocade (Foundry) devices.
 
 Create or use a device subclass that inherits this class.  Do not use
 directly.
@@ -256,19 +248,19 @@ CDP compatibility
 
 =over
 
-=item $fdp->c_interval()
+=item $fdp->fdp_interval()
 
 Interval in seconds at which FDP messages are generated.
 
 (C<fdpGlobalMessageInterval>)
 
-=item $fdp->c_holdtime()
+=item $fdp->fdp_holdtime()
 
 Time in seconds that FDP messages are kept. 
 
 (C<fdpGlobalHoldTime>)
 
-=item  $fdp->c_id() 
+=item  $fdp->fdp_id() 
 
 Returns FDP device ID.  
 
@@ -277,7 +269,7 @@ retrieved from remote devices with $fdp->id().
 
 (C<fdpGlobalDeviceId>)
 
-=item $cdp->cdp_run()
+=item $fdp->fdp_run()
 
 Is FDP enabled on this device?
 
@@ -294,7 +286,7 @@ CDP compatibility
 
 =over
 
-=item $fdp->c_capabilities()
+=item $fdp->fdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
 binary string, 7 digits long, MSB.  Each digit represents a bit from the
@@ -333,26 +325,26 @@ this information.
 
 (C<fdpCacheCapabilities>)
 
-=item $fdp->c_domain()
+=item $fdp->fdp_domain()
 
 The CDP version of this returns remote VTP Management Domain as defined
 in C<CISCO-VTP-MIB::managementDomainName>
 
 (C<fdpCacheVTPMgmtDomain>)
 
-=item $fdp->c_duplex() 
+=item $fdp->fdp_duplex() 
 
 Returns the port duplex status from remote devices.
 
 (C<fdpCacheDuplex>)
 
-=item $fdp->c_id()
+=item $fdp->fdp_id()
 
 Returns remote device id string
 
 (C<fdpCacheDeviceId>)
 
-=item $fdp->c_if()
+=item $fdp->fdp_if()
 
 Returns the mapping to the SNMP Interface Table.
 
@@ -380,7 +372,7 @@ truncate the last number off of it :
   return \%fdp_if;
 
 
-=item $fdp->c_index()
+=item $fdp->fdp_index()
 
 Returns the mapping to the SNMP2 Interface table for FDP Cache Entries. 
 
@@ -391,37 +383,37 @@ See fdp_if() entry.
 
 (C<fdpCacheIfIndex>)
 
-=item  $fdp->c_ip()
+=item  $fdp->fdp_ip()
 
 Returns remote IP address
 
 (C<fdpCacheAddress>)
 
-=item $fdp->c_platform() 
+=item $fdp->fdp_platform() 
 
 Returns remote platform id 
 
 (C<fdpCachePlatform>)
 
-=item $fdp->c_port()
+=item $fdp->fdp_port()
 
 Returns remote port ID
 
 (C<fdpDevicePort>)
 
-=item  $fdp->c_proto()
+=item  $fdp->fdp_proto()
 
 Returns remote address type received.  Usually IP.
 
 (C<fdpCacheAddressType>)
 
-=item $fdp->c_ver() 
+=item $fdp->fdp_ver() 
 
 Returns remote hardware version
 
 (C<fdpCacheVersion>)
 
-=item $fdp->c_vlan()
+=item $fdp->fdp_vlan()
 
 Returns the remote interface native VLAN.
 

Info/IEEE802dot11.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( 'IEEE802dot11-MIB' => 'dot11DesiredSSID', );
 

Info/IPv6.pm

@@ -44,7 +44,7 @@ use constant {
     IPV6MIB => 3,
 };
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 
 
@@ -59,7 +59,7 @@ $VERSION = '2.08';
 %FUNCS = ( 
     'ip_n2p_phys_addr'  => 'ipNetToPhysicalPhysAddress',    # IP-MIB
     'c_inet_phys_addr'  => 'cInetNetToMediaPhysAddress',    # CISCO-IETF-IP-MIB
-    'i6_n2p_phys_addr'  => 'ipv6NetToMediaNetAddress',      # IPV6-MIB
+    'i6_n2p_phys_addr'  => 'ipv6NetToMediaPhysAddress',     # IPV6-MIB
 
     'ip_n2p_phys_type'  => 'ipNetToPhysicalType',           # IP-MIB
     'c_inet_phys_type'  => 'cInetNetToMediaType',           # CISCO-IETF-IP-MIB
@@ -137,8 +137,17 @@ sub ipv6_n2p_addr {
             }
             if ($addrtype == 2) { # IPv6
                 my $v6_packed = pack("C*", split(/\./, $v6addr));
-                $v6addr = join(':', map { sprintf("%04x", $_) } unpack("n*", $v6_packed) );
-                $return->{$row} = $v6addr;
+                if (length($v6_packed) == 15) {
+                    # Workaround for some some IP-MIB implementations, eg on Cisco Nexus: no explicit addrsize, 
+                    # so what we've collected in that variable is actually the first byte of the address.
+                    $v6_packed = pack('C', $addrsize) . $v6_packed;
+                }
+                if (length($v6_packed) == 16) {
+                    $v6addr = join(':', map { sprintf("%04x", $_) } unpack("n*", $v6_packed) );
+                    $return->{$row} = $v6addr;
+                } else {
+                    printf("Invalid size for IPv6 address: expected 16 bytes, got %d (%s = %s)\n", length($v6_packed), $row, $net_addr->{$row});
+                }
             }
         }
     }
@@ -385,8 +394,9 @@ Jeroen van Ingen and Carlos Vicente
 =head1 DESCRIPTION
 
 The SNMP::Info::IPv6 class implements functions to for mapping IPv6 addresses 
-to MAC addresses, interfaces and more. It will use data from the IP-MIB, IPV6-MIB 
-or the CISCO-IETF-IP-MIB, whichever is supported by the device.
+to MAC addresses, interfaces and more. It will use data from the F<IP-MIB>,
+F<IPV6-MIB>, or the F<CISCO-IETF-IP-MIB>, whichever is supported by the
+device.
 
 This class is inherited by Info::Layer3 to provide IPv6 node tracking across  
 device classes.

Info/LLDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     'LLDP-MIB'          => 'lldpLocSysCapEnabled',
@@ -95,24 +95,30 @@ sub hasLLDP {
 
 sub lldp_if {
     my $lldp    = shift;
-    my $partial = shift || 0;
+    my $partial = shift;
 
     my $addr    = $lldp->lldp_rem_pid($partial) || {};
     my $i_descr = $lldp->i_description() || {};
+    my $i_alias = $lldp->i_alias() || {};
     my %r_i_descr = reverse %$i_descr;
+    my %r_i_alias = reverse %$i_alias;
     
     my %lldp_if;
     foreach my $key ( keys %$addr ) {
         my @aOID = split( '\.', $key );
         my $port = $aOID[1];
         next unless $port;
-        # Local LLDP port may not equate to ifIndex
-        # Cross reference lldpLocPortDesc with ifDescr to get ifIndex
+        # Local LLDP port may not equate to ifIndex, see LldpPortNumber TEXTUAL-CONVENTION in LLDP-MIB.
+        # Cross reference lldpLocPortDesc with ifDescr and ifAlias to get ifIndex,
+        # prefer ifDescr over ifAlias because using cross ref with description is correct behavior 
+        # according to the LLDP-MIB. Some devices (eg H3C gear) seem to use ifAlias though.
         my $lldp_desc = $lldp->lldpLocPortDesc($port);
         my $desc = $lldp_desc->{$port};
         # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
         if ( exists $r_i_descr{$desc} ) {
             $port = $r_i_descr{$desc};
+        } elsif ( exists $r_i_alias{$desc} ) {
+            $port = $r_i_alias{$desc};
         }
         
         $lldp_if{$key} = $port;
@@ -122,7 +128,7 @@ sub lldp_if {
 
 sub lldp_ip {
     my $lldp    = shift;
-    my $partial = shift || 0;
+    my $partial = shift;
 
     my $rman_addr = $lldp->lldp_rman_addr($partial) || {};
 
@@ -138,7 +144,7 @@ sub lldp_ip {
 
 sub lldp_addr {
     my $lldp    = shift;
-    my $partial = shift || 0;
+    my $partial = shift;
 
     my $rman_addr = $lldp->lldp_rman_addr($partial) || {};
 
@@ -153,7 +159,7 @@ sub lldp_addr {
 
 sub lldp_port {
     my $lldp    = shift;
-    my $partial = shift || 0;
+    my $partial = shift;
 
     my $pdesc = $lldp->lldp_rem_desc($partial)     || {};
     my $pid   = $lldp->lldp_rem_pid($partial)      || {};
@@ -162,10 +168,15 @@ sub lldp_port {
     my %lldp_port;
     foreach my $key ( sort keys %$pid ) {
         my $port = $pdesc->{$key};
+        my $type = $ptype->{$key};
+        if ( $type and $type eq 'interfaceName' ) {
+            # If the pid claims to be an interface name,
+            # believe it.
+            $port = $pid->{$key};
+        }
         unless ($port) {
             $port = $pid->{$key};
             next unless $port;
-            my $type = $ptype->{$key};
             next unless $type;
 
           # May need to format other types in the future, i.e. Network address
@@ -175,7 +186,7 @@ sub lldp_port {
             }
         }
 
-        # Nortel lldpRemPortDesc doesn't match ifDescr, but we can still
+        # Avaya/Nortel lldpRemPortDesc doesn't match ifDescr, but we can still
         # figure out slot.port based upon lldpRemPortDesc
         if ( $port =~ /^(Unit\s+(\d+)\s+)?Port\s+(\d+)$/ ) {
             $port = defined $1 ? "$2.$3" : "$3";
@@ -188,7 +199,7 @@ sub lldp_port {
 
 sub lldp_id {
     my $lldp    = shift;
-    my $partial = shift || 0;
+    my $partial = shift;
 
     my $ch_type = $lldp->lldp_rem_id_type($partial) || {};
     my $ch      = $lldp->lldp_rem_id($partial)      || {};
@@ -400,10 +411,6 @@ capability and nothing else."
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-Methods accessing the (C<lldpRemTable>) table use a partial value of zero if 
-not provided to set the (C<lldpRemTimeMark>) TimeMark instance to a known value
-as per RFC 2021.
-
 =over
 
 =item $lldp->lldp_id()
@@ -415,9 +422,9 @@ with the remote system.
 
 =item $lldp->lldp_if()
 
-Returns the mapping to the SNMP Interface Table.  Trys to cross reference 
-(C<lldpLocPortDesc>) with (C<ifDescr>) to get (C<ifIndex>), if unable 
-defaults to (C<lldpRemLocalPortNum>).
+Returns the mapping to the SNMP Interface Table. Tries to cross reference 
+(C<lldpLocPortDesc>) with (C<ifDescr>) and (C<ifAlias>) to get (C<ifIndex>), 
+if unable defaults to (C<lldpRemLocalPortNum>).
 
 =item  $lldp->lldp_ip()
 

Info/Layer1.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( %SNMP::Info::MIBS, 'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex' );
 

Info/Layer1/Allied.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, 'root_ip' => 'actualIPAddr', );

Info/Layer1/Asante.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, );

Info/Layer1/Bayhub.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
@@ -93,7 +93,7 @@ sub os {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -469,7 +469,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer1::Bayhub - SNMP Interface to Bay / Nortel Hubs
+SNMP::Info::Layer1::Bayhub - SNMP Interface to Bay/Nortel/Avaya Hubs
 
 =head1 AUTHOR
 
@@ -541,7 +541,7 @@ These are methods that return scalar value from SNMP
 
 =item $bayhub->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $bayhub->os()
 

Info/Layer1/Cyclades.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer1::MIBS,

Info/Layer1/S3000.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2.pm

@@ -45,7 +45,7 @@ use SNMP::Info::PowerEthernet;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,         %SNMP::Info::Bridge::MIBS,
@@ -123,8 +123,11 @@ sub serial {
     # precedence
     #   serial2,chassis parse,serial1
     return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
-    return $1
-        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
+
+    if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i ) {
+        return $1;
+    }
+
     return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
     return;
@@ -155,10 +158,18 @@ sub interfaces {
     my $i_descr    = $l2->i_description($partial) || {};
 
     # Replace the Index with the ifDescr field.
+    # Check for duplicates in ifDescr, if so uniquely identify by adding
+    # ifIndex to repeated values
+    my %seen;
     foreach my $iid ( keys %$i_descr ) {
         my $port = $i_descr->{$iid};
         next unless defined $port;
-        $interfaces->{$iid} = $port;
+        if ( $seen{$port}++ ) {
+            $interfaces->{$iid} = sprintf( "%s (%d)", $port, $iid );
+        }
+        else {
+            $interfaces->{$iid} = $port;
+        }
     }
     return $interfaces;
 }

Info/Layer2/Airespace.pm

@@ -1,5 +1,4 @@
 # SNMP::Info::Layer2::Airespace
-# $Id$
 #
 # Copyright (c) 2008 Eric Miller
 #
@@ -41,13 +40,14 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,      %SNMP::Info::Bridge::MIBS,
     %SNMP::Info::CDP::MIBS, %SNMP::Info::Airespace::MIBS,
-    'AIRESPACE-SWITCHING-MIB' => 'agentInterfaceVlanId',
     'CISCO-LWAPP-DOT11-CLIENT-MIB' => 'cldcClientCurrentTxRateSet',
+    'CISCO-LWAPP-DOT11-MIB'        => 'cldHtDot11nChannelBandwidth',
+    'CISCO-LWAPP-AP-MIB'           => 'cLApIfMacAddress',
 );
 
 %GLOBALS = (
@@ -58,28 +58,68 @@ $VERSION = '2.08';
 %FUNCS = (
     %SNMP::Info::FUNCS,      %SNMP::Info::Bridge::FUNCS,
     %SNMP::Info::CDP::FUNCS, %SNMP::Info::Airespace::FUNCS,
-
-    # This needs to be cleaned up, but for now we pretend to
-    # have the CISCO-DOT11-MIB for signal strengths, etc.
-    'cd11_sigstrength' => 'bsnMobileStationRSSI',	# kinda
-    'cd11_sigqual'     => 'bsnMobileStationSnr',	# kinda
-    'cd11_rxbyte'      => 'bsnMobileStationBytesReceived',
-    'cd11_txbyte'      => 'bsnMobileStationBytesSent',
-    'cd11_rxpkt'       => 'bsnMobileStationPacketsReceived',
-    'cd11_txpkt'       => 'bsnMobileStationPacketsSent',
-    'cd11_txrate'      => 'cldcClientCurrentTxRateSet',
+    # CISCO-LWAPP-AP-MIB::cLApTable
+    'ap_if_mac'        => 'cLApIfMacAddress',
+    # CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientTable
+    'client_txrate'    => 'cldcClientCurrentTxRateSet',
+    'cd11_proto'       => 'cldcClientProtocol',
     'cd11_rateset'     => 'cldcClientDataRateSet',
+    # CISCO-LWAPP-DOT11-MIB::cldHtMacOperationsTable
+    'cd11n_ch_bw'      => 'cldHtDot11nChannelBandwidth',
+
 );
 
 %MUNGE = (
     %SNMP::Info::MUNGE,      %SNMP::Info::Bridge::MUNGE,
     %SNMP::Info::CDP::MUNGE, %SNMP::Info::Airespace::MUNGE,
-    'cd11_rxpkt'	=> \&munge_64bits,
-    'cd11_txpkt'	=> \&munge_64bits,
-    'cd11_txrate'       => \&munge_cd11_txrate,
+    'ap_if_mac'         => \&SNMP::Info::munge_mac,
+    'cd11n_ch_bw'       => \&munge_cd11n_ch_bw,
     'cd11_rateset'      => \&munge_cd11_rateset,
+    'cd11_proto'        => \&munge_cd11_proto,
 );
 
+# 802.11n Modulation and Coding Scheme (MCS)
+my $mcs_index = {
+    20 => {
+	m0  => '6.5',
+	m1  => '13',
+	m2  => '19.5',
+	m3  => '26',
+	m4  => '39',
+	m5  => '52',
+	m6  => '58.5',
+	m7  => '65',
+	m8  => '13',
+	m9  => '26',
+	m10 => '39',
+	m11 => '52',
+	m12 => '78',
+	m13 => '104',
+	m14 => '117',
+	m15 => '130',
+	# This is a cheat for 802.11a bonded
+	m108 => '108',
+    },
+    40 => {
+	m0  => '15',
+	m1  => '30',
+	m2  => '45',
+	m3  => '60',
+	m4  => '90',
+	m5  => '120',
+	m6  => '135',
+	m7  => '157.5',
+	m8  => '30',
+	m9  => '60',
+	m10 => '90',
+	m11 => '120',
+	m12 => '180',
+	m13 => '240',
+	m14 => '270',
+	m15 => '300',
+    }
+};
+
 sub os {
     return 'cisco';
 }
@@ -96,9 +136,6 @@ sub model {
     return $model;
 }
 
-# vlan:
-# AIRESPACE-SWITCHING-MIB::agentInterfaceVlanId
-
 sub cd11_mac {
     my $airespace = shift;
     my $cd11_sigstrength = $airespace->cd11_sigstrength();
@@ -111,13 +148,47 @@ sub cd11_mac {
     return $ret;
 }
 
-sub munge_cd11_txrate {
-    my $rate = shift;
-    if ( $rate ) {
-        return [ $rate * 1.0 ];
-    } else {
-        return [ 0.0 ];
+sub cd11_txrate {
+    my $airespace = shift;
+    
+    my $rates  = $airespace->client_txrate() || {};
+    my $protos = $airespace->cd11_proto()    || {};
+    my $bws    = $airespace->cd11n_ch_bw()   || {};
+    
+    my $cd11_txrate = {};
+    foreach my $idx ( keys %$rates ) {
+	my $rate = $rates->{$idx} || '0.0';
+	
+	if ( $rate =~ /^\d+/ ) {
+            $cd11_txrate->{$idx} = [ $rate * 1.0 ];
+	}
+	elsif ( $rate =~ /^m/ ) {
+	    my $band = $protos->{$idx};
+	    my $bw   = $bws->{$band};
+	    $cd11_txrate->{$idx} = [ $mcs_index->{$bw}->{$rate} || '0.0' ];
+	}
+	else {
+	    $cd11_txrate->{$idx} = [ $rate ];
+	}
     }
+    return $cd11_txrate;
+}
+
+sub munge_cd11n_ch_bw {
+    my $bw = shift;
+    
+    if ( $bw =~ /forty/ ) {
+	return 40;
+    }
+    return 20;
+}
+
+sub munge_cd11_proto {
+    my $bw = shift;
+    
+    return 2 if ( $bw eq 'dot11n5' );
+
+    return 1;
 }
 
 sub munge_cd11_rateset {
@@ -125,11 +196,29 @@ sub munge_cd11_rateset {
     return [ map { $_ * 1.0 } split /,/, $rates ];
 }
 
-sub munge_64bits {
-    # The controller sometimes hands off a ridiculous value for packets.
-    # Just truncate it to 32 bits.
-    my $value = shift;
-    return $value & 0xffffffff;
+# Cisco provides the AP's Ethernet MAC via
+# CISCO-LWAPP-AP-MIB::cLApIfMacAddress this was not available pre-Cisco
+sub i_mac {
+    my $airespace = shift;
+    my $partial   = shift;
+
+    my $i_index = $airespace->i_index($partial)  || {};
+    my $ap_mac  = $airespace->ap_if_mac()        || {};
+
+    my $i_mac = $airespace->SUPER::i_mac() || {};
+    foreach my $iid ( keys %$i_index ) {
+	my $index = $i_index->{$iid};
+	next unless defined $index;
+
+	if ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+	    $index =~ s/\.\d+$//;
+	    next unless defined $index;
+	    my $sys_mac = join( '.', map { hex($_) } split( ':', $index ) );
+	    my $mac = $ap_mac->{$sys_mac};
+	    $i_mac->{$iid} = $mac;
+	}
+    }
+    return $i_mac;
 }
 
 1;
@@ -187,6 +276,12 @@ my $airespace = new SNMP::Info::Layer2::Airespace(...);
 
 =over
 
+=item F<CISCO-LWAPP-DOT11-CLIENT-MIB>
+
+=item F<CISCO-LWAPP-DOT11-MIB>
+
+=item F<CISCO-LWAPP-AP-MIB>
+
 =item Inherited Classes' MIBs
 
 See L<SNMP::Info::Airespace/"Required MIBs"> for its own MIB requirements.
@@ -238,10 +333,24 @@ to a hash.
 
 =item cd11_mac()
 
+Returns client radio interface MAC addresses.
+
+=item cd11_txrate()
+
+Returns client transmission speed in Mbs.
+
 =back 
 
 =head2 Overrides
 
+=over
+
+=item i_mac()
+
+Adds AP Ethernet MAC as port mac on radio ports from C<CISCO-LWAPP-AP-MIB>.
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::Airespace
 
 See documentation in L<SNMP::Info::Airespace/"TABLE METHODS"> for details.
@@ -254,15 +363,22 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
 
-=head1 MUNGES
+=head1 Data Munging Callback Subroutines
 
 =over
 
-=item munge_64bits()
+=item munge_cd11n_ch_bw()
+
+Converts 802.11n channel bandwidth to either 20 or 40.
+
+=item munge_cd11_proto()
+
+Converts 802.11n 2.4Ghz to 1 and 5Ghz to 2 to correspond to the
+(C<cldHtMacOperationsTable>) index.
 
 =item munge_cd11_rateset()
 
-=item munge_cd11_txrate()
+Converts rate set to array.
 
 =back
 

Info/Layer2/Aironet.pm

@@ -49,7 +49,7 @@ use SNMP::Info::IEEE802dot11;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %GLOBALS = (
     %SNMP::Info::IEEE802dot11::GLOBALS,
@@ -437,6 +437,26 @@ sub i_ssidbcast {
     return $i_ssidbcast;
 }
 
+sub i_ssidmac {
+    my $aironet    = shift;
+    my $partial    = shift;
+    my $mbss_mac_addr = $aironet->mbss_mac_addr();
+
+    # Same logic as i_ssidbcast to return same indexes as i_ssidlist 
+    my $map = {};
+    foreach my $key ( keys %$mbss_mac_addr ) {
+        my ( $interface, @idx ) = split( /\./, $key );
+        $map->{ pack( "C*", @idx ) } = $mbss_mac_addr->{$key};
+    }
+
+    my $i_ssidlist  = $aironet->i_ssidlist();
+    my $i_ssidmac = {};
+    foreach my $key ( keys %$i_ssidlist ) {
+        $i_ssidmac->{$key} = $map->{ $i_ssidlist->{$key} };
+    }
+    return $i_ssidmac;
+}
+
 1;
 __END__
 
@@ -556,7 +576,7 @@ Returns radio interfaces.
 
 =item $aironet->cd11_mac()
 
-Returns radio interface MAC addresses.
+Returns client radio interface MAC addresses.
 
 =item $aironet->cd11_ssid()
 
@@ -623,6 +643,11 @@ to which they belong.
 With the same keys as i_ssidlist, returns whether the given SSID is
 being broadcast.
 
+=item $aironet->i_ssidmac()
+
+With the same keys as i_ssidlist, returns the Basic service set
+identification (BSSID), MAC address, the AP is using for the SSID. 
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer2

Info/Layer2/Allied.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );
 

Info/Layer2/Bay.pm

@@ -1,492 +0,0 @@
-# SNMP::Info::Layer2::Bay
-# $Id$
-# This module depricated.  See Layer2::BayStack
-#
-# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
-#
-# Copyright (c) 2002,2003 Regents of the University of California
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-
-package SNMP::Info::Layer2::Bay;
-
-use strict;
-use Exporter;
-use SNMP::Info::Layer2;
-
-@SNMP::Info::Layer2::Bay::ISA       = qw/SNMP::Info::Layer2 Exporter/;
-@SNMP::Info::Layer2::Bay::EXPORT_OK = qw//;
-
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
-
-$VERSION = '2.08';
-
-# Set for No CDP
-%GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,
-    'cdp_id'  => 's5EnMsTopIpAddr',
-    'cdp_run' => 's5EnMsTopStatus',
-);
-
-%FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,
-    'imac2' => 'ifPhysAddress',
-
-    # S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmTable
-    'bay_topo_slot'     => 's5EnMsTopNmmSlot',
-    'bay_topo_port'     => 's5EnMsTopNmmPort',
-    'bay_topo_ip'       => 's5EnMsTopNmmIpAddr',
-    'bay_topo_seg'      => 's5EnMsTopNmmSegId',
-    'bay_topo_mac'      => 's5EnMsTopNmmMacAddr',
-    'bay_topo_platform' => 's5EnMsTopNmmChassisType',
-    'bay_topo_localseg' => 's5EnMsTopNmmLocalSeg',
-);
-
-%MIBS = (
-    %SNMP::Info::Layer2::MIBS,
-    'SYNOPTICS-ROOT-MIB'           => 'synoptics',
-    'S5-ETH-MULTISEG-TOPOLOGY-MIB' => 's5EnMsTop'
-);
-
-delete $MIBS{'CISCO-CDP-MIB'};
-
-# 450's report full duplex as speed = 20mbps?!
-$SNMP::Info::SPEED_MAP{20_000_000}  = '10 Mbps';
-$SNMP::Info::SPEED_MAP{200_000_000} = '100 Mbps';
-
-%MUNGE = ( %SNMP::Info::Layer2::MUNGE, 'i_mac2' => \&SNMP::Info::munge_mac, );
-
-sub os {
-    return 'bay';
-}
-
-sub os_ver {
-    my $bay   = shift;
-    my $descr = $bay->description();
-    return unless defined $descr;
-
-    # 303 / 304
-    if ( $descr =~ m/Rev: \d+\.\d+\.\d+\.\d+-(\d+\.\d+\.\d+\.\d+)/ ) {
-        return $1;
-    }
-
-    # 450
-    if ( $descr =~ m/SW:v(\d+\.\d+\.\d+\.\d+)/ ) {
-        return $1;
-    }
-    return;
-}
-
-sub os_bin {
-    my $bay   = shift;
-    my $descr = $bay->description();
-    return unless defined $descr;
-
-    # 303 / 304
-    if ( $descr =~ m/Rev: \d+\.(\d+\.\d+\.\d+)-\d+\.\d+\.\d+\.\d+/ ) {
-        return $1;
-    }
-
-    # 450
-    if ( $descr =~ m/FW:v(\d+\.\d+\.\d+\.\d+)/ ) {
-        return $1;
-    }
-    return;
-}
-
-sub vendor {
-
-    # or nortel, or synopsis?
-    return 'bay';
-}
-
-sub i_ignore {
-    my $bay   = shift;
-    my $descr = $bay->description();
-
-    my $i_type = $bay->i_type();
-
-    my %i_ignore;
-    foreach my $if ( keys %$i_type ) {
-        my $type = $i_type->{$if};
-        $i_ignore{$if}++ if $type =~ /(loopback|propvirtual|cpu)/i;
-    }
-
-    return \%i_ignore;
-}
-
-sub interfaces {
-    my $bay     = shift;
-    my $i_index = $bay->i_index();
-
-    return $i_index;
-}
-
-sub i_mac {
-    my $bay   = shift;
-    my $i_mac = $bay->i_mac2();
-
-    # Bay 303's with a hw rev < 2.11.4.5 report the mac as all zeros
-    foreach my $iid ( keys %$i_mac ) {
-        my $mac = $i_mac->{$iid};
-        delete $i_mac->{$iid} if $mac eq '00:00:00:00:00:00';
-    }
-    return $i_mac;
-}
-
-sub model {
-    my $bay = shift;
-    my $id  = $bay->id();
-    return unless defined $id;
-    my $model = &SNMP::translateObj($id);
-    return $id unless defined $model;
-    $model =~ s/^sreg-//i;
-
-    my $descr = $bay->description();
-
-    return '303' if ( $descr =~ /\D303\D/ );
-    return '304' if ( $descr =~ /\D304\D/ );
-    return '450' if ( $model =~ /BayStack450/ );
-    return $model;
-}
-
-# Hack in some CDP type stuff
-
-sub c_if {
-    my $bay           = shift;
-    my $bay_topo_port = $bay->bay_topo_port();
-
-    my %c_if;
-    foreach my $entry ( keys %$bay_topo_port ) {
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if $port == 0;
-        $c_if{"$port.1"} = $port;
-    }
-    return \%c_if;
-}
-
-sub c_ip {
-    my $bay           = shift;
-    my $bay_topo_ip   = $bay->bay_topo_ip();
-    my $bay_topo_port = $bay->bay_topo_port();
-    my $ip            = $bay->cdp_ip();
-
-    # Count the number of devices seen on each port.
-    #   more than one device seen means connected to a non-bay
-    #   device, but other bay devices are squawking further away.
-    my %ip_port;
-    foreach my $entry ( keys %$bay_topo_ip ) {
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if ( $port =~ /^[\d\.]+$/ and $port == 0 );
-        my $ip = $bay_topo_ip->{$entry};
-        push( @{ $ip_port{$port} }, $ip );
-    }
-
-    my %c_ip;
-    foreach my $port ( keys %ip_port ) {
-        my $ips = $ip_port{$port};
-        if ( scalar @$ips == 1 ) {
-            $c_ip{"$port.1"} = $ips->[0];
-        }
-        else {
-            $c_ip{"$port.1"} = $ips;
-        }
-    }
-
-    return \%c_ip;
-}
-
-sub c_port {
-    my $bay           = shift;
-    my $bay_topo_port = $bay->bay_topo_port();
-    my $bay_topo_seg  = $bay->bay_topo_seg();
-
-    my %c_port;
-    foreach my $entry ( keys %$bay_topo_seg ) {
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if $port == 0;
-
-        # For fake remotes (multiple IPs for a c_ip), use first found
-        next if defined $c_port{"$port.1"};
-
-        my $seg = $bay_topo_seg->{$entry};
-
-        # Segment id is (256 * remote slot_num) + (remote_port)
-        my $remote_port = $seg % 256;
-
-        $c_port{"$port.1"} = $remote_port;
-    }
-
-    return \%c_port;
-}
-
-sub c_platform {
-    my $bay               = shift;
-    my $bay_topo_port     = $bay->bay_topo_port();
-    my $bay_topo_platform = $bay->bay_topo_platform();
-
-    my %c_platform;
-    foreach my $entry ( keys %$bay_topo_platform ) {
-        my $port = $bay_topo_port->{$entry} || 0;
-        next if $port == 0;
-
-        # For fake remotes (multiple IPs for a c_ip), use first found
-        next if defined $c_platform{"$port.1"};
-
-        my $platform = $bay_topo_platform->{$entry};
-
-        $c_platform{"$port.1"} = $platform;
-    }
-
-    return \%c_platform;
-}
-
-1;
-__END__
-
-=head1 NAME
-
-SNMP::Info::Layer2::Bay - SNMP Interface to old Bay Network BayStack Switches
-
-=head1 AUTHOR
-
-Max Baker
-
-=head1 SYNOPSIS
-
-This module is Deprecated.  Please use Layer2::BayStack instead.
-
-=head1 DESCRIPTION
-
-Provides abstraction to the configuration information obtainable from a 
-Bay device through SNMP. 
-
-For speed or debugging purposes you can call the subclass directly, but not
-after determining a more specific class using the method above. 
-
- my $bay = new SNMP::Info::Layer2::Bay(...);
-
-=head2 Inherited Classes
-
-=over
-
-=item SNMP::Info::Layer2
-
-=back
-
-=head2 Required MIBs
-
-=over
-
-=item F<SYNOPTICS-ROOT-MIB>
-
-=item F<S5-ETH-MULTISEG-TOPOLOGY-MIB>
-
-=item Inherited classes
-
-MIBs required by L<SNMP::Info::Layer2/"Required MIBs"> and its superclasses.
-
-=back
-
-=head1 GLOBALS
-
-These are methods that return scalar value from SNMP
-
-=over
-
-=item $bay->vendor()
-
-Returns 'bay' :)
-
-=item $bay->model()
-
-Cross references $bay->id() to the F<SYNOPTICS-MIB> and returns
-the results.  303s and 304s have the same ID, so we have a hack
-to return depending on which it is. 
-
-Removes C<sreg-> from the model name
-
-=item $baystack->os()
-
-Returns 'bay'.
-
-=item $bay->os_ver()
-
-Returns the os version extracted from C<sysDescr>.
-
-=item $bay->os_bin()
-
-Returns the firmware version extracted from C<sysDescr>.
-
-=item $bay->cdp_id()
-
-Returns the IP that the device is sending out for its Nmm topology info.
-
-(C<s5EnMsTopIpAddr>)
-
-=item $bay->cdp_run()
-
-Returns if the F<S5-ETH-MULTISEG-TOPOLOGY> info is on for this device. 
-
-(C<s5EnMsTopStatus>)
-
-=back
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
-=head1 TABLE METHODS
-
-These are methods that return tables of information in the form of a reference
-to a hash.
-
-=head2 Overrides
-
-=over
-
-=item $bay->interfaces()
-
-Returns reference to map of IIDs to physical ports. 
-
-Currently simply returns the C<ifIndex>
-
-=item $bay->i_ignore()
-
-Returns reference to hash of IIDs to ignore.
-
-Simply calls the SNMP::Info::Layer2::i_ignore() for this.
-
-=item $bay->i_mac()
-
-Returns the C<ifPhysAddress> table entries. 
-
-Removes all entries matching '00:00:00:00:00:00' -- Certain 
-older revisions of Bay 303 and 304 firmware report all zeros
-for each port mac.
-
-=back
-
-=head2 Pseudo CDP information
-
-All entries with port=0 are local and ignored.
-
-=over
-
-=item $bay->c_if()
-
-Returns reference to hash.  Key: port.1 Value: port (iid)
-
-=item $bay->c_ip()
-
-Returns reference to hash.  Key: port.1 
-
-The value of each hash entry can either be a scalar or an array.
-A scalar value is most likely a direct neighbor to that port. 
-It is possible that there is a non-bay device in between this device and the
-remote device.
-
-An array value represents a list of seen devices.  The only time you will get
-an array of neighbors, is if there is a non-bay device in between two or more
-devices. 
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $bay->c_port()
-
-Returns reference to hash. Key: IID, Value: Remote port (interfaces)
-
-=item $bay->c_platform()
-
-Returns reference to hash. Key: IID, Value: Remote device type
-
-=item $bay->port()
-
-Returns reference to hash. Key: port.1 Value: port
-
-=item $bay->platform()
-
-Returns reference to hash. Key: port.1 Value: Remote Device Type
-
-=back
-
-=head2 Layer2 Topology info (C<s5EnMsTopNmmTable>)
-
-=over
-
-=item $bay->bay_topo_slot()
-
-Returns reference to hash.  Key: Table entry, Value:slot number
-
-(C<s5EnMsTopNmmSlot>)
-
-=item $bay->bay_topo_port()
-
-Returns reference to hash.  Key: Table entry, Value:Port Number
-(interface iid)
-
-(C<s5EnMsTopNmmPort>)
-
-=item $bay->bay_topo_ip()
-
-Returns reference to hash.  Key: Table entry, Value:Remote IP address of entry
-
-(C<s5EnMsTopNmmIpAddr>)
-
-=item $bay->bay_topo_seg()
-
-Returns reference to hash.  Key: Table entry, Value:Remote Segment ID
-
-(C<s5EnMsTopNmmSegId>)
-
-=item $bay->bay_topo_mac
-(C<s5EnMsTopNmmMacAddr>)
-
-Returns reference to hash.  Key: Table entry, Value:Remote MAC address
-
-=item $bay->bay_topo_platform
-
-Returns reference to hash.  Key: Table entry, Value:Remote Device Type
-
-(C<s5EnMsTopNmmChassisType>)
-
-=item $bay->bay_topo_localseg
-
-Returns reference to hash.  Key: Table entry, Value:Boolean, if bay_topo_seg()
-is local
-
-(C<s5EnMsTopNmmLocalSeg>)
-
-=back
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
-=cut

Info/Layer2/Baystack.pm

@@ -46,12 +46,13 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::RapidCity::MIBS, %SNMP::Info::NortelStack::MIBS,
     %SNMP::Info::SONMP::MIBS,
+    'BAY-STACK-PETH-EXT-MIB' => 'bspePethPsePortExtMeasuredPower',
 );
 
 %GLOBALS = (
@@ -64,6 +65,7 @@ $VERSION = '2.08';
     %SNMP::Info::Layer3::FUNCS,    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::RapidCity::FUNCS, %SNMP::Info::NortelStack::FUNCS,
     %SNMP::Info::SONMP::FUNCS,
+    'peth_port_power' => 'bspePethPsePortExtMeasuredPower',
 );
 
 # 450's report full duplex as speed = 20mbps?!
@@ -79,27 +81,20 @@ $SNMP::Info::SPEED_MAP{2_000_000_000} = '1.0 Gbps';
 
 sub os {
     my $baystack = shift;
-    my $descr    = $baystack->description();
-    my $model    = $baystack->model();
+    my $descr    = $baystack->description() || "";
+    my $model    = $baystack->model() || "";
 
-    if ( ( defined $descr and $descr =~ /Business Ethernet Switch.*SW:v/i ) )
-    {
+    if ( $descr =~ /Business Ethernet Switch.*SW:v/i ) {
         return 'bes';
     }
-    if (
-        (
-           (defined $model and $model =~ /(420|425|BPS)/ )
-        and
-           (defined $descr and $descr =~ m/SW:v[1-2]/i )
-        )
-        or
-        (
-            (defined $model and $model =~ /(410|450|380)/ )
-        )
-       )
+    if (   ( ( $model =~ /(420|425|BPS)/ ) and ( $descr =~ m/SW:v[1-2]/i ) )
+        or ( ( $model =~ /(410|450|380)/ ) ) )
     {
         return 'baystack';
     }
+    if ( $model =~ /VSP/ ) {
+        return 'vsp';
+    }
 
     return 'boss';
 }
@@ -126,7 +121,7 @@ sub os_bin {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -141,9 +136,12 @@ sub model {
     return '303' if ( defined $descr and $descr =~ /\D303\D/ );
     return '304' if ( defined $descr and $descr =~ /\D304\D/ );
     return 'BPS' if ( $model =~ /BPS2000/i );
-    return $2
-        if ( $model
-        =~ /(ES|ERS|BayStack|EthernetRoutingSwitch|EthernetSwitch)-?(\d+)/ );
+    
+    # Pull sreg- from all
+    $model =~ s/^sreg-//;
+    # Strip ES/ERS/BayStack etc. from those families
+    $model =~ s/^(E(R)?S|BayStack|Ethernet(Routing)?Switch)-?//;
+    $model =~ s/-ethSwitchNMM//;
 
     return $model;
 }
@@ -214,7 +212,7 @@ sub i_name {
 
 sub index_factor {
     my $baystack = shift;
-    my $model    = $baystack->model();
+    my $model    = $baystack->model() || "";
     my $os       = $baystack->os();
     my $os_ver   = $baystack->os_ver();
     my $op_mode  = $baystack->ns_op_mode();
@@ -228,142 +226,16 @@ sub index_factor {
 
     my $index_factor = 32;
     $index_factor = 64
-        if ( ( defined $model and $model =~ /(470)/ )
+        if ( ( $model =~ /(470)/ )
         or ( $os =~ m/(boss|bes)/ ) and ( $op_mode eq 'pure' ) );
     $index_factor = 128
-        if ( ( defined $model and $model =~ /(5[56]\d\d)/ )
+        if ( ( $model =~ /(5[56]\d\d)|VSP/ )
         and ( $os_ver >= 6 ) );
 
     return $index_factor;
 }
 
-#  Use SONMP and/or LLDP
 
-sub hasCDP {
-    my $baystack = shift;
-
-    return $baystack->hasLLDP() || $baystack->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $cdp  = $baystack->SUPER::c_ip($partial) || {};
-    my $lldp = $baystack->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_if($partial)     || {};
-    my $cdp  = $baystack->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_port($partial)     || {};
-    my $cdp  = $baystack->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_id($partial)     || {};
-    my $cdp  = $baystack->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $baystack->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
 
 # Newer devices support ENTITY-MIB, use if available otherwise use proprietary
 # methods.
@@ -475,8 +347,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Baystack - SNMP Interface to Nortel Ethernet (Baystack)
-Switches
+SNMP::Info::Layer2::Baystack - SNMP Interface to Avaya Ethernet Switch
+(Baystack) and VSP 7000 series switches
 
 =head1 AUTHOR
 
@@ -499,8 +371,9 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Nortel 
-Ethernet Switch (Baystack) through SNMP. 
+Provides abstraction to the configuration information obtainable from an
+Avaya Ethernet Switch (formerly Nortel/Bay Baystack) and VSP 7000 series
+through SNMP. 
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -527,6 +400,8 @@ my $baystack = new SNMP::Info::Layer2::Baystack(...);
 
 =over
 
+=item F<BAY-STACK-PETH-EXT-MIBB>
+
 =back
 
 =head2 Inherited MIBs
@@ -549,7 +424,7 @@ These are methods that return scalar value from SNMP
 
 =item $baystack->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $baystack->model()
 
@@ -645,10 +520,16 @@ revisions of Baystack firmware report all zeros for each port mac.
 Crosses C<ifName> with C<ifAlias> and returns the human set port name if
 exists.
 
-=item $poe->peth_port_ifindex()
+=item $baystack->peth_port_ifindex()
 
 Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 
+=item $baystack->peth_port_power()
+
+Power supplied by PoE ports, in milliwatts
+
+(C<bspePethPsePortExtMeasuredPower>)
+
 =back
 
 =head2 F<ENTITY-MIB> Information
@@ -719,54 +600,6 @@ ns_e_vendor().
 
 =back
 
-=head2 Topology information
-
-Based upon the software version devices may support SynOptics Network
-Management Protocol (SONMP) and Link Layer Discovery Protocol (LLDP). These
-methods will query both and return the combination of all information. As a
-result, there may be identical topology information returned from the two
-protocols causing duplicate entries.  It is the calling program's
-responsibility to identify any duplicate entries and remove duplicates if
-necessary.
-
-=over
-
-=item $baystack->hasCDP()
-
-Returns true if the device is running either SONMP or LLDP.
-
-=item $baystack->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $baystack->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-SONMP/LLDP device in between two or
-more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $baystack->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $baystack->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $baystack->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::SONMP
 
 See L<SNMP::Info::SONMP/"TABLE METHODS"> for details.

Info/Layer2/C1900.pm

@@ -46,7 +46,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,

Info/Layer2/C2900.pm

@@ -47,7 +47,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
@@ -139,6 +139,32 @@ sub i_duplex_admin {
     return \%i_duplex_admin;
 }
 
+sub i_speed_admin {
+    my $c2900   = shift;
+    my $partial = shift;
+
+    my %i_speed_admin;
+    my $p_port        = $c2900->p_port() || {};
+    my $interfaces    = $c2900->interfaces($partial);
+    my $c2900_p_index = $c2900->c2900_p_index() || {};
+
+    my %reverse_2900 = reverse %$c2900_p_index;
+    my $c2900_p_speed
+        = $c2900->c2900_p_speed_admin( $reverse_2900{$partial} );
+
+    my %speeds = (
+        'autoDetect' => 'auto',
+        's10000000'  => '10 Mbps',
+        's100000000' => '100 Mbps',
+    );
+
+    %i_speed_admin
+        = map { $c2900_p_index->{$_} => $speeds{ $c2900_p_speed->{$_} } }
+        keys %$c2900_p_index;
+
+    return \%i_speed_admin;
+}
+
 sub set_i_speed_admin {
     my $c2900 = shift;
     my ( $speed, $iid ) = @_;
@@ -349,6 +375,10 @@ Returns reference to hash of IIDs to admin duplex setting
 
 Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex_admin()
 
+=item $c2900->i_speed_admin()
+
+Returns reference to hash of IIDs to admin speed setting.
+
 =back
 
 =head2 F<C2900-MIB> Port Entry Table 

Info/Layer2/Catalyst.pm

@@ -49,7 +49,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoPortSecurity::MIBS,

Info/Layer2/Centillion.pm

@@ -43,7 +43,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,

Info/Layer2/Cisco.pm

@@ -50,7 +50,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,

Info/Layer2/CiscoSB.pm

@@ -0,0 +1,268 @@
+# SNMP::Info::Layer2::CiscoSB
+# $Id$
+#
+# Copyright (c) 2013 Nic Bernstein
+#
+# Copyright (c) 2008-2009 Max Baker changes from version 0.8 and beyond.
+#
+# Copyright (c) 2003 Regents of the University of California
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::CiscoSB;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+use SNMP::Info::Entity;
+use SNMP::Info::EtherLike;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CDP;
+
+@SNMP::Info::Layer2::CiscoSB::ISA
+    = qw/SNMP::Info::Layer2 SNMP::Info::Entity SNMP::Info::EtherLike
+    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::CiscoSB::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.08';
+
+# This will be filled in with the device's index into the EntPhysicalEntry
+# table by the serial() function.
+our $index = undef;
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+    %SNMP::Info::EtherLike::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    'descr'  => 'sysDescr'
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::Entity::FUNCS,
+    %SNMP::Info::EtherLike::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+);
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::Entity::MIBS,
+    %SNMP::Info::EtherLike::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CDP::MIBS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+    %SNMP::Info::EtherLike::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+);
+
+
+sub vendor {
+    return 'cisco';
+}
+
+# Walk the entPhysicalSerialNum table and return both the first serial
+# number found as well as the index of that entry.
+sub serial {
+    my $ciscosb  = shift;
+    my $serial   = undef;  
+    my $e_serial = $ciscosb->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( keys %$e_serial ) {
+        if (defined ($e_serial->{$e}) and $e_serial->{$e} !~ /^\s*$/) {
+            $index = $e;
+            last;
+        }
+    }
+    return $e_serial->{$index} if defined $index;
+}
+
+sub os_ver {
+    my $ciscosb = shift;
+    my $os_ver  = $ciscosb->e_swver();
+
+    return $os_ver->{$index} if defined $index;
+}
+  
+# Grab e_model from Entity and tag on e_hwver
+sub model {
+    my $ciscosb = shift;
+    my $e_model   = $ciscosb->e_model();
+    my $e_hwver = $ciscosb->e_hwver();
+
+    if (defined ($index)) {
+        my $model = "$e_model->{$index} $e_hwver->{$index}";
+        return $model;
+    }
+    return $ciscosb->description();
+}
+
+# ifDescr is the same for all interfaces in a class, but the ifName is
+# unique, so let's use that for port name.
+sub interfaces {
+    my $ciscosb = shift;
+    my $partial = shift;
+
+    my $interfaces = $ciscosb->i_name($partial);
+
+    return $interfaces;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::CiscoSB - SNMP Interface to Cisco Small Business series
+
+=head1 AUTHOR
+
+Nic Bernstein (shamelessly stolen from Max Baker's Aironet code)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ciscosb = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $ciscosb->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides interface to SNMP Data available on Cisco Small Business (nee LinkSys)
+managed switches. [i.e. those matching enterprises(1).cisco(9).otherEnterprises(6).ciscosb(1)]
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=item SNMP::Info::Entity
+
+=item SNMP::Info::EtherLike
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoConfig
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes
+
+MIBs required by the inherited classes listed above.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ciscosb->vendor()
+
+Returns 'cisco'
+
+=item $ciscosb->os_ver()
+
+Returns software version (C<entPhysicalSoftwareRev>)
+
+=item $ciscosb->serial()
+
+Returns serial number of unit (C<entPhysicalSerialNum>)
+
+=item $ciscosb->model()
+
+Returns model and hardware revision of unit
+(C<entPhysicalModelName+entPhysicalHardwareRev>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::EtherLike
+
+See documentation in L<SNMP::Info::EtherLike/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+=head2 Overrides
+
+=over
+
+=item $ciscosb->interfaces()
+
+Uses the i_name() field.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::EtherLike
+
+See documentation in L<SNMP::Info::EtherLike/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/Foundry.pm

@@ -1,349 +0,0 @@
-# SNMP::Info::Layer2::Foundry - SNMP Interface to Foundry Switches
-# $Id$
-#
-# Copyright (c) 2008 Max Baker
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-
-package SNMP::Info::Layer2::Foundry;
-
-use strict;
-use Exporter;
-use SNMP::Info::Layer2;
-use SNMP::Info::FDP;
-use SNMP::Info::EtherLike;
-use SNMP::Info::MAU;
-
-@SNMP::Info::Layer2::Foundry::ISA
-    = qw/SNMP::Info::Layer2 SNMP::Info::FDP SNMP::Info::EtherLike
-    SNMP::Info::MAU    Exporter/;
-@SNMP::Info::Layer2::Foundry::EXPORT_OK = qw//;
-
-use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
-
-$VERSION = '2.08';
-
-%MIBS = (
-    %SNMP::Info::Layer2::MIBS,    %SNMP::Info::FDP::MIBS,
-    %SNMP::Info::EtherLike::MIBS, %SNMP::Info::MAU::MIBS,
-    'FOUNDRY-SN-ROOT-MIB' => 'foundry',
-);
-
-%GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,    %SNMP::Info::FDP::GLOBALS,
-    %SNMP::Info::EtherLike::GLOBALS, %SNMP::Info::MAU::GLOBALS,
-);
-
-%FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,    %SNMP::Info::FDP::FUNCS,
-    %SNMP::Info::EtherLike::FUNCS, %SNMP::Info::MAU::FUNCS,
-    'test' => 'dot1dStpPortState',
-);
-
-%MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,    %SNMP::Info::FDP::MUNGE,
-    %SNMP::Info::EtherLike::MUNGE, %SNMP::Info::MAU::MUNGE,
-);
-
-# Method OverRides
-
-#sub bulkwalk_no { 1;}
-
-*SNMP::Info::Layer2::Foundry::i_duplex = \&SNMP::Info::MAU::mau_i_duplex;
-*SNMP::Info::Layer2::Foundry::i_duplex_admin
-    = \&SNMP::Info::MAU::mau_i_duplex_admin;
-*SNMP::Info::Layer2::Foundry::i_vlan = \&SNMP::Info::Bridge::qb_i_vlan_t;
-
-# todo doc these
-
-sub os_ver {
-    my $foundry = shift;
-
-    my $e_name = $foundry->e_name();
-
-    # find entity table entry for "stackmanaget.1"
-    my $unit_iid = undef;
-    foreach my $e ( keys %$e_name ) {
-        my $name = $e_name->{$e} || '';
-        $unit_iid = $e if $name eq 'stackmanaget.1';
-    }
-
-    # Default to OID method if no dice.
-    unless ( defined $unit_iid ) {
-        return $foundry->SUPER::model();
-    }
-
-    # Find Model Name
-    my $e_fwver = $foundry->e_fwver();
-    if ( defined $e_fwver->{$unit_iid} ) {
-        return $e_fwver->{$unit_iid};
-    }
-
-    # Not found in ENTITY-MIB, go up a level.
-    return $foundry->SUPER::os_ver();
-}
-
-sub model {
-    my $foundry = shift;
-
-    my $e_name = $foundry->e_name();
-
-    # find entity table entry for "unit.1"
-    my $unit_iid = undef;
-    foreach my $e ( keys %$e_name ) {
-        my $name = $e_name->{$e} || '';
-        $unit_iid = $e if $name eq 'unit.1';
-    }
-
-    # Default to OID method if no dice.
-    unless ( defined $unit_iid ) {
-        return $foundry->SUPER::model();
-    }
-
-    # Find Model Name
-    my $e_model = $foundry->e_model();
-    if ( defined $e_model->{$unit_iid} ) {
-        return $e_model->{$unit_iid};
-    }
-
-    # Not found in ENTITY-MIB, go up a level.
-    return $foundry->SUPER::model();
-
-}
-
-sub serial {
-    my $foundry = shift;
-
-    my $e_name = $foundry->e_name();
-
-    # find entity table entry for "unit.1"
-    my $unit_iid = undef;
-    foreach my $e ( keys %$e_name ) {
-        my $name = $e_name->{$e} || '';
-        $unit_iid = $e if $name eq 'unit.1';
-    }
-    return unless defined $unit_iid;
-
-    # Look up serial of found entry.
-    my $e_serial = $foundry->e_serial();
-    return $e_serial->{$unit_iid} if defined $e_serial->{$unit_iid};
-
-    return $foundry->SUPER::serial();
-}
-
-sub interfaces {
-    my $foundry = shift;
-    my $i_descr = $foundry->i_description;
-    my $i_name  = $foundry->i_name;
-
-    # use ifName only if it is in portn
-    #   format.  For EdgeIrons
-    # else use ifDescr
-    foreach my $iid ( keys %$i_name ) {
-        my $name = $i_name->{$iid};
-        next unless defined $name;
-        $i_descr->{$iid} = $name
-            if $name =~ /^port\d+/i;
-    }
-
-    return $i_descr;
-}
-
-sub i_ignore {
-    my $foundry = shift;
-    my $i_type  = $foundry->i_type();
-
-    my %i_ignore = ();
-
-    foreach my $iid ( keys %$i_type ) {
-        my $type = $i_type->{$iid} || '';
-        $i_ignore{$iid}++
-
-            # 33 is the console port
-            if $type =~ /(loopback|propvirtual|other|cpu|33)/i;
-    }
-    return \%i_ignore;
-}
-
-sub os {
-    return 'foundry';
-}
-
-sub vendor {
-    return 'foundry';
-}
-
-# this hangs on a edgeiron24g
-# TODO: check by devicetype and deferr to SUPER if not bad device
-sub stp_p_state { return; }
-
-1;
-__END__
-
-=head1 NAME
-
-SNMP::Info::Layer2::Foundry - SNMP Interface to Foundry FastIron Network
-Devices
-
-=head1 AUTHOR
-
-Max Baker
-
-=head1 SYNOPSIS
-
-This module is Deprecated.  Please use Layer3::Foundry instead.
-
- # Let SNMP::Info determine the correct subclass for you. 
- my $foundry = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 1
-                        ) 
-    or die "Can't connect to DestHost.\n";
-
- my $class = $foundry->class();
-
- print "SNMP::Info determined this device to fall under subclass : $class\n";
-
-=head1 DESCRIPTION
-
-This module is Deprecated.  Please use Layer3::Foundry instead.
-
-This module provides support for Foundry EdgeIron Switches
-
-=head2 Inherited Classes
-
-=over
-
-=item SNMP::Info::Layer2
-
-=item SNMP::Info::FDP
-
-=back
-
-=head2 Required MIBs
-
-=over
-
-=item F<FOUNDRY-SN-ROOT-MIB>
-
-=item Inherited Classes' MIBs
-
-See classes listed above for their required MIBs.
-
-=back
-
-=head1 GLOBALS
-
-These are methods that return scalar value from SNMP
-
-=over
-
-=item $foundry->model()
-
-Returns model type.
-
-=item $foundry->vendor()
-
-Returns 'foundry'
-
-=item $foundry->os()
-
-Returns 'foundry'
-
-=item $foundry->os_ver()
-
-Returns the software version
-
-=item $foundry->serial()
-
-Returns the serial number
-
-=back
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::FDP
-
-See documentation in L<SNMP::Info::FDP/"GLOBALS"> for details.
-
-=head1 TABLE METHODS
-
-These are methods that return tables of information in the form of a reference
-to a hash.
-
-=head2 Overrides
-
-=over
-
-=item $foundry->interfaces()
-
-Returns reference to hash of interface names to iids.
-
-=item $foundry->i_ignore()
-
-Returns reference to hash of interfaces to be ignored.
-
-Ignores interfaces with descriptions of  tunnel,loopback,null 
-
-=item $foundry->i_duplex()
-
-Returns reference to hash of interface link duplex status. 
-
-Crosses $foundry->sw_duplex() with $foundry->sw_index()
-
-=item $foundry->i_duplex_admin()
-
-Returns reference to hash of interface administrative duplex status. 
-
-=item $foundry->stp_p_state()
-
-"The port's current state as defined by application of the Spanning Tree
-Protocol.
-
-Skipped if device is an EdgeIron 24G due to reports of hangs.
-
-(C<dot1dStpPortState>)
-
-=item $foundry->i_vlan()
-
-Returns a mapping between C<ifIndex> and the PVID or default VLAN.
-
-=back
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::FDP
-
-See documentation in L<SNMP::Info::FDP/"TABLE METHODS"> for details.
-
-=cut

Info/Layer2/HP.pm

@@ -46,7 +46,7 @@ use SNMP::Info::CDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -167,6 +167,10 @@ $VERSION = '2.08';
     'J4905A' => '3400cl-24G',
     'J4815A' => '3324XL',
     'J4851A' => '3124',
+    'J9729A' => '2920-48G-PoE+',
+    'J9728A' => '2920-48G',
+    'J9727A' => '2920-24G-PoE+',
+    'J9726A' => '2920-24G',
     'J9562A' => '2915-8G-PoE',
     'J9148A' => '2910al-48G-PoE+',
     'J9147A' => '2910al-48G',
@@ -178,26 +182,30 @@ $VERSION = '2.08';
     'J4903A' => '2824',
     'J9022A' => '2810-48G',
     'J9021A' => '2810-24G',
+    'J4899C' => '2650C',
     'J8165A' => '2650-PWR',
     'J4899B' => '2650-CR',
-    'J4899C' => '2650C',
     'J4899A' => '2650',
+    'J4900C' => '2626C',
     'J8164A' => '2626-PWR',
     'J4900B' => '2626-CR',
-    'J4900C' => '2626C',
     'J4900A' => '2626',
     'J9627A' => '2620-48-PoE+',
-    'J9624A' => '2620-48',
-    'J9624A' => '2620-24-PPoE+',
+    'J9626A' => '2620-48',
     'J9625A' => '2620-24-PoE+',
+    'J9624A' => '2620-24-PPoE+',
     'J9623A' => '2620-24',
     'J9565A' => '2615-8-PoE',
     'J9089A' => '2610-48-PWR',
     'J9088A' => '2610-48',
-    'J9087A' => '2610-24-PWR',
     'J9086A' => '2610-24/12PWR',
+    'J9087A' => '2610-24-PWR',
     'J9085A' => '2610-24',
     'J8762A' => '2600-8-PWR',
+    'J9772A' => '2530-48G-PoE+',
+    'J9775A' => '2530-48G',
+    'J9773A' => '2530-24G-PoE+',
+    'J9776A' => '2530-24G',
     'J4813A' => '2524',
     'J9298A' => '2520G-8-PoE',
     'J9299A' => '2520G-24-PoE',
@@ -413,108 +421,6 @@ sub _sensor {
     return $result;
 }
 
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $hp = shift;
-
-    return $hp->hasLLDP() || $hp->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $cdp  = $hp->SUPER::c_ip($partial) || {};
-    my $lldp = $hp->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_if($partial)     || {};
-    my $cdp  = $hp->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_port($partial)     || {};
-    my $cdp  = $hp->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_id($partial)     || {};
-    my $cdp  = $hp->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
 sub munge_hp_c_id {
     my ($v) = @_;
     if ( length(unpack('H*', $v)) == 12 ){
@@ -528,30 +434,6 @@ sub munge_hp_c_id {
     }
 }
 
-sub c_platform {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $hp->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
 # POWER-ETHERNET-MIB doesn't define a mapping of its
 # "module"/"port" index to ifIndex.  Different vendors
 # do this in different ways.
@@ -759,7 +641,7 @@ Returns bytes of used memory
 Returns the model number of the HP Switch.  Will translate between the HP Part
 number and the common model number with this map :
 
-%MODEL_MAP = (
+ %MODEL_MAP = (
     'J8131A' => 'WAP-420-WW',
     'J8130A' => 'WAP-420-NA',
     'J8133A' => 'AP520WL',
@@ -828,7 +710,7 @@ number and the common model number with this map :
     'J4900C' => '2626C',
     'J4900A' => '2626',
     'J9627A' => '2620-48-PoE+',
-    'J9624A' => '2620-48',
+    'J9626A' => '2620-48',
     'J9624A' => '2620-24-PPoE+',
     'J9625A' => '2620-24-PoE+',
     'J9623A' => '2620-24',
@@ -856,7 +738,7 @@ number and the common model number with this map :
     'J9450A' => '1810G-24',
     'J9029A' => '1800-8G',
     'J9028A' => '1800-24G',
-);
+ );
 
 =item $hp->os()
 
@@ -902,12 +784,12 @@ Power supply 2 status
 =item $hp->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("hpicfPoePethPsePortPower")
+(C<hpicfPoePethPsePortPower>)
 
 =item $hp->stp_ver()
 
 Returns what version of STP the device is running.
-("hpicfBridgeRstpForceVersion" with fallback to inherited stp_ver())
+(C<hpicfBridgeRstpForceVersion> with fallback to inherited stp_ver())
 
 =back
 
@@ -946,7 +828,8 @@ Returns reference to hash of IIDs to admin duplex setting.
 
 =item $hp->vendor_i_type()
 
-Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
 
 =item $hp->i_name()
 
@@ -959,53 +842,6 @@ interface index (c<ifIndex>)
 
 =back
 
-=head2 Topology information
-
-Based upon the firmware version HP devices may support Cisco Discovery
-Protocol (CDP), Link Layer Discovery Protocol (LLDP), or both.  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
-
-=over
-
-=item $hp->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=item $hp->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $hp->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $hp->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $hp->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $hp->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
@@ -1041,4 +877,6 @@ operations.
 
 =item set_i_vlan_tagged()
 
+=back
+
 =cut

Info/Layer2/HP4000.pm

@@ -44,7 +44,7 @@ use SNMP::Info::CDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -652,7 +652,8 @@ Returns reference to hash of IIDs to admin duplex setting.
 
 =item $hp->vendor_i_type()
 
-Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
 
 =item $hp->i_name()
 
@@ -718,4 +719,6 @@ operations.
 
 =item set_i_vlan_tagged()
 
+=back
+
 =cut

Info/Layer2/HPVC.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
@@ -89,7 +89,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::HPVC - SNMP Interface to HP VirtualConnect Switches
+SNMP::Info::Layer2::HPVC - SNMP Interface to HP Virtual Connect Switches
 
 =head1 AUTHOR
 
@@ -113,7 +113,7 @@ Jeroen van Ingen
 =head1 DESCRIPTION
 
 Provides abstraction to the configuration information obtainable from a 
-HP VirtualConnect Switch via SNMP. 
+HP Virtual Connect Switch via SNMP. 
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -150,7 +150,7 @@ These are methods that return scalar value from SNMP
 
 =item $hp->os()
 
-Returns hpvc
+Returns C<'hpvc'>
 
 =item $hp->os_bin()
 

Info/Layer2/Kentrox.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/N2270.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,        %SNMP::Info::Bridge::MIBS,

Info/Layer2/NAP222x.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::IEEE802dot11::MIBS,

Info/Layer2/Netgear.pm

@@ -33,26 +33,32 @@ package SNMP::Info::Layer2::Netgear;
 use strict;
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::Entity;
 use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Entity SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::Netgear::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
-%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::LLDP::MIBS, );
+# This will be filled in with the device's index into the EntPhysicalEntry
+# table by the serial() function.
+our $index = undef;
+
+%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::Entity::MIBS, %SNMP::Info::LLDP::MIBS, );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
-    ng_serial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
-    ng_osver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::Entity::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
+    ng_fsosver   => '.1.3.6.1.4.1.4526.11.11.1.0',
+    ng_gsmserial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
+    ng_gsmosver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
 );
 
-%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::LLDP::FUNCS, );
+%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::Entity::FUNCS, %SNMP::Info::LLDP::FUNCS, );
 
-%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::Entity::MUNGE, %SNMP::Info::LLDP::MUNGE, );
 
 sub vendor {
     return 'netgear';
@@ -62,17 +68,79 @@ sub os {
     return 'netgear';
 }
 
-# Wish the OID-based method worked, but netgear scatters
-# the sysObjectID values across all the device MIBs, and
-# makes the device MIBs state secrets.
-# They seem to set sysDescr to the model number, though,
-# so we'll use that.
+# We will attempt to use Entity-MIB if present.  In that case, we will
+# also set the shared variable $index, which is used by other functions
+# to index within Entity-MIB tables. This assumes, of course, that there
+# is only one serial number (entPhysicalSerialNum) present in the table.
+sub serial {
+    my $netgear = shift;
+    my $serial = undef;
+    
+    my $e_serial = $netgear->e_serial();
+    if (defined($e_serial)) { # This unit sports the Entity-MIB
+        # Find entity table entry for this unit
+        foreach my $e ( keys %$e_serial ) {
+            if (defined ($e_serial->{$e}) and $e_serial->{$e} !~ /^\s*$/) {
+                $index = $e;
+                last;
+            }
+        }
+        return $e_serial->{$index} if defined $index;
+    }
+
+    # Without Enitity-MIB, we've got to work our way through a bunch of
+    # different locales...
+    return $netgear->ng_gsmserial() if defined $netgear->model and $netgear->model =~ m/GSM\d/i;;
+    return 'none';
+}
+
+# If device supports Entity-MIB, index into that to divine model and
+# hardware version, otherwise default to sysDescr.
 sub model {
     my $netgear = shift;
+    if (defined($index)) {
+        my $model   = $netgear->e_descr();
+        my $e_hwver = $netgear->e_hwver();
+
+        $model = "$model->{$index} $e_hwver->{$index}";
+        return $model;
+    }
     return $netgear->description();
 }
 
-#
+# ifDescr is the same for all interfaces in a class, but the ifName is
+# unique, so let's use that for port name.  If all else fails, 
+# concatentate ifDesc and ifIndex.
+sub interfaces {
+    my $netgear = shift;
+    my $partial = shift;
+
+    my $interfaces = $netgear->i_index($partial)       || {};
+    my $i_descr    = $netgear->i_description($partial) || {};
+    my $i_name     = $netgear->i_name($partial);
+    my $i_isset    = ();
+    # Replace the description with the ifName field, if set
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        if (defined $name and $name !~ /^\s*$/) {
+            $interfaces->{$iid} = $name;
+            $i_isset->{$iid} = 1;
+        }
+    }
+    # Replace the Index with the ifDescr field, appended with index
+    # number, to deal with devices with non-unique ifDescr.
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid} . '-' . $iid;
+        next unless defined $port;
+        next if (defined $i_isset->{$iid} and $i_isset->{$iid} == 1);
+        $interfaces->{$iid} = $port;
+    }
+
+    return $interfaces;
+}
+
+
 # This is model-dependent.  Some netgear brand devices don't implement
 # the bridge MIB forwarding table, so we use the Q-BRIDGE-MIB forwarding
 # table.  Fall back to the orig functions if the qb versions don't
@@ -94,57 +162,141 @@ sub fw_port {
 # these seem to work for GSM models but not GS
 # https://sourceforge.net/tracker/?func=detail&aid=3085413&group_id=70362&atid=527529
 sub os_ver {
-    my $self = shift;
-    return if $self->model and $self->model =~ m/GS\d/i;
-    return $self->ng_osver();
-}
-
-sub serial {
-    my $self = shift;
-    return if $self->model and $self->model =~ m/GS\d/i;
-    return $self->ng_serial();
+    my $netgear = shift;
+    my $serial  = $netgear->serial(); # Make sure that index gets primed
+    if (defined($index)) {
+        my $os_ver  = $netgear->e_swver();
+        return $os_ver->{$index} if defined $os_ver;
+    }
+    return $netgear->ng_gsmosver() if defined  $netgear->model and $netgear->model =~ m/GSM\d/i;
+    return $netgear->ng_fsosver() if defined  $netgear->model and $netgear->model =~ m/FS\d/i;
 }
 
 #  Use LLDP
 
 sub hasCDP {
     my $netgear = shift;
-    return $netgear->hasLLDP();
+    return $netgear->hasLLDP() || $netgear->SUPER::hasCDP();
 }
 
 sub c_ip {
     my $netgear = shift;
-    my $partial  = shift;
+    my $partial = shift;
 
-    return $netgear->lldp_ip($partial);
+    my $cdp  = $netgear->SUPER::c_ip($partial) || {};
+    my $lldp = $netgear->lldp_ip($partial)     || {};
+
+    my %c_ip;
+    foreach my $iid ( keys %$cdp ) {
+        my $ip = $cdp->{$iid};
+        next unless defined $ip;
+
+        $c_ip{$iid} = $ip;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $ip = $lldp->{$iid};
+        next unless defined $ip;
+
+        $c_ip{$iid} = $ip;
+    }
+    return \%c_ip;
 }
 
 sub c_if {
     my $netgear = shift;
     my $partial  = shift;
 
-    return $netgear->lldp_if($partial);
+    my $lldp = $netgear->lldp_if($partial)     || {};
+    my $cdp  = $netgear->SUPER::c_if($partial) || {};
+
+    my %c_if;
+    foreach my $iid ( keys %$cdp ) {
+        my $if = $cdp->{$iid};
+        next unless defined $if;
+
+        $c_if{$iid} = $if;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $if = $lldp->{$iid};
+        next unless defined $if;
+
+        $c_if{$iid} = $if;
+    }
+    return \%c_if;
 }
 
 sub c_port {
     my $netgear = shift;
     my $partial  = shift;
 
-    return $netgear->lldp_port($partial);
+    my $lldp = $netgear->lldp_port($partial)     || {};
+    my $cdp  = $netgear->SUPER::c_port($partial) || {};
+
+    my %c_port;
+    foreach my $iid ( keys %$cdp ) {
+        my $port = $cdp->{$iid};
+        next unless defined $port;
+
+        $c_port{$iid} = $port;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $port = $lldp->{$iid};
+        next unless defined $port;
+
+        $c_port{$iid} = $port;
+    }
+    return \%c_port;
 }
 
 sub c_id {
     my $netgear = shift;
     my $partial  = shift;
 
-    return $netgear->lldp_id($partial);
+    my $lldp = $netgear->lldp_id($partial)     || {};
+    my $cdp  = $netgear->SUPER::c_id($partial) || {};
+
+    my %c_id;
+    foreach my $iid ( keys %$cdp ) {
+        my $id = $cdp->{$iid};
+        next unless defined $id;
+
+        $c_id{$iid} = $id;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $id = $lldp->{$iid};
+        next unless defined $id;
+
+        $c_id{$iid} = $id;
+    }
+    return \%c_id;
 }
 
 sub c_platform {
     my $netgear = shift;
     my $partial  = shift;
 
-    return $netgear->lldp_rem_sysdesc($partial);
+    my $lldp = $netgear->lldp_rem_sysdesc($partial)  || {};
+    my $cdp  = $netgear->SUPER::c_platform($partial) || {};
+
+    my %c_platform;
+    foreach my $iid ( keys %$cdp ) {
+        my $platform = $cdp->{$iid};
+        next unless defined $platform;
+
+        $c_platform{$iid} = $platform;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $platform = $lldp->{$iid};
+        next unless defined $platform;
+
+        $c_platform{$iid} = $platform;
+    }
+    return \%c_platform;
 }
 
 
@@ -158,8 +310,8 @@ SNMP::Info::Layer2::Netgear - SNMP Interface to Netgear switches
 
 =head1 AUTHOR
 
-Bill Fenner and Zoltan Erszenyi, 
-Hacked in LLDP support from Baystack.pm by 
+ Bill Fenner and Zoltan Erszenyi, 
+ Hacked in LLDP support from Baystack.pm by 
  Nic Bernstein <nic@onlight.com>
 
 =head1 SYNOPSIS
@@ -188,6 +340,7 @@ inherited methods.
 =over
 
 =item SNMP::Info::Layer2
+=item SNMP::Info::Entity
 =item SNMP::Info::LLDP
 
 =back
@@ -201,6 +354,8 @@ inherited methods.
 MIBs listed in L<SNMP::Info::Layer2/"Required MIBs"> and its inherited
 classes.
 
+See L<SNMP::Info::Entity/"Required MIBs"> for its MIB requirements.
+
 See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
 
 =back
@@ -223,7 +378,8 @@ Returns 'netgear'
 
 =item $netgear->model()
 
-Returns description()
+Returns concatenation of $e_model and $e_hwver if Entity MIB present, 
+otherwise returns description()
 
 =item $netgear->os_ver()
 
@@ -231,7 +387,8 @@ Returns OS Version.
 
 =item $netgear->serial()
 
-Returns Serial Number.
+Returns Serial Number if available (older FS switches have no accessible
+serial number).
 
 =back
 
@@ -239,6 +396,10 @@ Returns Serial Number.
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::LLDP
 
 See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
@@ -269,6 +430,10 @@ Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
 the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
 C<Q-BRIDGE-MIB> doesn't return anything.
 
+=item $netgear->interfaces()
+
+Uses the i_name() field.
+
 =back
 
 =head2 Topology information
@@ -318,4 +483,12 @@ Returns reference to hash.  Key: iid Value: Remote Device Type
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =cut

Info/Layer2/Orinoco.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/ZyXEL_DSLAM.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );

Info/Layer3.pm

@@ -51,7 +51,7 @@ use SNMP::Info::AdslLine;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -132,11 +132,11 @@ $VERSION = '2.08';
     'bgp_peer_out_upd'        => 'bgpPeerOutUpdates',
 
     # IP-MIB Net to Physical Table (ARP Cache)
-    'n2p_paddr' => 'ipNetToPhysicalPhysAddress',
+    'n2p_paddr'      => 'ipNetToPhysicalPhysAddress',
     'n2p_lastupdate' => 'ipNetToPhysicalLastUpdated',
-    'n2p_ptype' => 'ipNetToPhysicalType',
-    'n2p_pstate' => 'ipNetToPhysicalState',
-    'n2p_pstatus' => 'ipNetToPhysicalRowStatus',
+    'n2p_ptype'      => 'ipNetToPhysicalType',
+    'n2p_pstate'     => 'ipNetToPhysicalState',
+    'n2p_pstatus'    => 'ipNetToPhysicalRowStatus',
 
 );
 
@@ -152,7 +152,7 @@ $VERSION = '2.08';
     %SNMP::Info::IPv6::MUNGE,
     'old_at_paddr' => \&SNMP::Info::munge_mac,
     'at_paddr'     => \&SNMP::Info::munge_mac,
-    'n2p_paddr' => \&SNMP::Info::munge_mac,
+    'n2p_paddr'    => \&SNMP::Info::munge_mac,
 );
 
 # Method OverRides
@@ -163,12 +163,12 @@ sub root_ip {
     my $router_ip = $l3->router_ip();
     my $ospf_ip   = $l3->ospf_ip();
 
-    # if the router ip exists and is a route advertised by the device we prefer
-    # it over the others
+   # if the router ip exists and is a route advertised by the device we prefer
+   # it over the others
     return $router_ip
         if (( defined $router_ip )
         and ( $router_ip ne '0.0.0.0' )
-        and ( grep { $ospf_ip->{$_} eq $router_ip } (keys %$ospf_ip))
+        and ( grep { $ospf_ip->{$_} eq $router_ip } ( keys %$ospf_ip ) )
         and ( $l3->snmp_connect_ip($router_ip) ) );
 
     # return the first one found here (should be only one)
@@ -215,8 +215,11 @@ sub serial {
     # precedence
     #   serial2,chassis parse,serial1
     return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
-    return $1
-        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
+
+    if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i ) {
+        return $1;
+    }
+
     return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
     return;
@@ -293,32 +296,37 @@ sub interfaces {
     my $l3      = shift;
     my $partial = shift;
 
-    my $interfaces   = $l3->i_index($partial);
-    my $descriptions = $l3->i_description($partial);
+    my $interfaces = $l3->i_index($partial);
+    my $i_descr    = $l3->i_description($partial);
 
-    my %interfaces = ();
-    foreach my $iid ( keys %$interfaces ) {
-        my $desc = $descriptions->{$iid};
-        next unless defined $desc;
-
-        $interfaces{$iid} = $desc;
+    # Check for duplicates in ifDescr, if so uniquely identify by adding
+    # ifIndex to repeated values
+    my %seen;
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid};
+        next unless defined $port;
+        if ( $seen{$port}++ ) {
+            $interfaces->{$iid} = sprintf( "%s (%d)", $port, $iid );
+        }
+        else {
+            $interfaces->{$iid} = $port;
+        }
     }
-
-    return \%interfaces;
+    return $interfaces;
 }
 
 sub vendor {
     my $l3 = shift;
 
     my $descr = $l3->description();
-    my $id = $l3->id();
+    my $id    = $l3->id();
 
     # .1.3.6.1.4.1.9.1 is the CISCO-PRODUCTS-MIB
     # .1.3.6.1.4.1.9.9.368.4 is an old tree that Cisco CSSs were numbered from
-    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
-    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
+    return 'cisco' if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
+    return 'cisco' if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
     return 'cisco'   if ( $descr =~ /(cisco|\bios\b)/i );
-    return 'foundry' if ( $descr =~ /foundry/i );
+    return 'brocade' if ( $descr =~ /foundry/i );
 
     return 'unknown';
 

Info/Layer3/Aironet.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/AlcatelLucent.pm

@@ -34,20 +34,28 @@ use strict;
 use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
+use SNMP::Info::AMAP;
+# Use LLDP
+# (or at least try.  The versions I've seen have two problems:
+# 1. they report ifIndex values as 'local'; we don't support ifIndex
+#    but *could*
+# 2. They report 0.0.0.0 as the management address
+# )
 use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::AMAP SNMP::Info::LLDP
+    SNMP::Info::MAU SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer3::AlcatelLucent::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
     %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::AMAP::MIBS,
     'ALCATEL-IND1-DEVICES'     => 'familyOmniSwitch7000',
     'ALCATEL-IND1-CHASSIS-MIB' => 'chasEntPhysOperStatus',
     'ALU-POWER-ETHERNET-MIB'   => 'pethPsePortDetectionStatus',
@@ -64,17 +72,17 @@ delete $MIBS{'POWER-ETHERNET-MIB'};
 
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS, %SNMP::Info::AMAP::GLOBALS,
 );
 
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS, %SNMP::Info::MAU::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS, %SNMP::Info::AMAP::FUNCS,
 );
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE, %SNMP::Info::MAU::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE, %SNMP::Info::AMAP::MUNGE,
 );
 
 # use MAU-MIB for admin. duplex and admin. speed
@@ -285,53 +293,6 @@ sub bp_index {
 #    return $i_vlan;
 #}
 
-# Use LLDP
-# (or at least try.  The versions I've seen have two problems:
-# 1. they report ifIndex values as 'local'; we don't support ifIndex
-#    but *could*
-# 2. They report 0.0.0.0 as the management address
-# )
-sub hasCDP {
-    my $alu = shift;
-
-    return $alu->hasLLDP();
-}
-
-sub c_ip {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_ip($partial);
-}
-
-sub c_if {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_if($partial);
-}
-
-sub c_port {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_port($partial);
-}
-
-sub c_id {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_id($partial);
-}
-
-sub c_platform {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_rem_sysdesc($partial);
-}
-
 # Power-Ethernet ifIndex mapping.  I've only seen this from a
 # fixed-config single-module system, so this is only a plausible
 # guess as to the mapping on a stack or modular system.
@@ -428,10 +389,6 @@ These are methods that return scalar value from SNMP
 
     Returns 'alcatel-lucent'
 
-=item $alu->hasCDP()
-
-    Returns whether LLDP is enabled.
-
 =item $alu->model()
 
 Tries to reference $alu->id() to one of the product MIBs listed above
@@ -502,26 +459,6 @@ Work around various bugs in the F<BRIDGE-MIB> and
 F<Q-BRIDGE-MIB> implementations, by returning both
 C<ifIndex> and C<dot1dBasePort> mappings to C<ifIndex> values.
 
-=item $alu->c_id()
-
-Returns LLDP information.
-
-=item $alu->c_if()
-
-Returns LLDP information.
-
-=item $alu->c_ip()
-
-Returns LLDP information.
-
-=item $alu->c_platform()
-
-Returns LLDP information.
-
-=item $alu->c_port()
-
-Returns LLDP information.
-
 =item $alu->i_duplex_admin()
 
 Returns info from F<MAU-MIB>

Info/Layer3/AlteonAD.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -66,6 +66,10 @@ $VERSION = '2.08';
     'new_tftp_result' => 'ALTEON_CHEETAH_SWITCH_MIB__agTftpLastActionStatus',
     'old_ip_max'      => 'ALTEON_TS_NETWORK_MIB__ipInterfaceTableMax',
     'new_ip_max'      => 'ALTEON_CHEETAH_NETWORK_MIB__ipInterfaceTableMax',
+    'fan'             => 'ALTEON_CHEETAH_SWITCH_MIB__hwFanStatus',
+    'old_ps1_stat'    => 'ALTEON_TIGON_SWITCH_MIB__hwPowerSupplyStatus',
+    'old_ps2_stat'    => 'ALTEON_TIGON_SWITCH_MIB__hwRedundantPSStatus',
+    'new_ps_stat'     => 'ALTEON_CHEETAH_SWITCH_MIB__hwPowerSupplyStatus',
 );
 
 %FUNCS = (
@@ -132,7 +136,7 @@ sub model {
 
     return $id unless defined $model;
 
-    $model =~ s/^aceswitch//;
+    $model =~ s/^(aceswitch|aws|ods)//;
     $model =~ s/^acedirector/AD/;
     $model =~ s/^(copper|fiber)Module/BladeCenter GbESM/;
 
@@ -140,7 +144,7 @@ sub model {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'radware';
 }
 
 sub os {
@@ -155,6 +159,36 @@ sub os_ver {
     return $version;
 }
 
+sub ps1_status {
+    my $alteon = shift;
+    my $old_ps = $alteon->old_ps1_stat();
+    my $new_ps = $alteon->new_ps_stat();
+    
+    return $old_ps if $old_ps;
+    
+    if ($new_ps) {
+        return 'ok' if ($new_ps eq 'singlePowerSupplyOk');
+        return 'failed' if ($new_ps eq 'firstPowerSupplyFailed');
+    }
+    
+    return;
+}
+
+sub ps2_status {
+    my $alteon = shift;
+    my $old_ps = $alteon->old_ps2_stat();
+    my $new_ps = $alteon->new_ps_stat();
+    
+    return $old_ps if $old_ps;
+    
+    if ($new_ps) {
+        return 'ok' if ($new_ps eq 'doublePowerSupplyOk');
+        return 'failed' if ($new_ps eq 'secondPowerSupplyFailed');
+    }
+
+    return;
+}
+
 sub interfaces {
     my $alteon       = shift;
     my $interfaces   = $alteon->i_index();
@@ -174,6 +208,7 @@ sub interfaces {
         # varies by switch model
         elsif ( defined $ip_max and $iid > $ip_max ) {
             $desc = ( $iid % $ip_max );
+            $desc = 'mgmt' if $desc == 231;
         }
         $interfaces{$iid} = $desc;
     }
@@ -207,39 +242,48 @@ sub i_duplex {
 sub i_duplex_admin {
     my $alteon = shift;
 
-    my $ag_pref = $alteon->new_ag_p_cfg_pref()
+    my $ag_pref 
+        = $alteon->new_ag_p_cfg_pref()
         || $alteon->old_ag_p_cfg_pref()
         || {};
-    my $ag_fe_auto = $alteon->new_ag_p_cfg_fe_auto()
+    my $ag_fe_auto 
+        = $alteon->new_ag_p_cfg_fe_auto()
         || $alteon->old_ag_p_cfg_fe_auto()
         || {};
-    my $ag_fe_mode = $alteon->new_ag_p_cfg_fe_mode()
+    my $ag_fe_mode 
+        = $alteon->new_ag_p_cfg_fe_mode()
         || $alteon->old_ag_p_cfg_fe_mode()
         || {};
-    my $ag_ge_auto = $alteon->new_ag_p_cfg_ge_auto()
+    my $ag_ge_auto 
+        = $alteon->new_ag_p_cfg_ge_auto()
         || $alteon->old_ag_p_cfg_ge_auto()
         || {};
-    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
+    my $ip_max  = $alteon->new_ip_max() || $alteon->old_ip_max();
+    my $i_speed = $alteon->i_speed()    || {};
 
     my %i_duplex_admin;
-    foreach my $if ( keys %$ag_pref ) {
-        my $pref = $ag_pref->{$if};
-        next unless defined $pref;
+    foreach my $if ( keys %$ag_ge_auto ) {
+        my $pref    = $ag_pref->{$if}    || '';
+        my $speed   = $i_speed->{$if}    || '';
+        my $ge_auto = $ag_ge_auto->{$if} || '';
+        my $fe_auto = $ag_fe_auto->{$if} || '';
+        my $fe_mode = $ag_fe_mode->{$if} || '';
 
-        my $string = 'other';
-        if ( $pref =~ /gigabit/i ) {
-            my $ge_auto = $ag_ge_auto->{$if};
-            $string = 'full' if ( $ge_auto =~ /off/i );
-            $string = 'auto' if ( $ge_auto =~ /on/i );
+        # Default to auto
+        my $string = 'auto';
+
+        if ( $ge_auto =~ /off/i
+            && ( $pref =~ /gigabit/i || $speed eq '1.0 Gbps' ) )
+        {
+            $string = 'full';
         }
-        elsif ( $pref =~ /fast/i ) {
-            my $fe_auto = $ag_fe_auto->{$if};
-            my $fe_mode = $ag_fe_mode->{$if};
+        if ( $fe_auto =~ /off/i
+            && ( $pref =~ /fast/i || $speed =~ /100?\sMbps/ ) )
+        {
             $string = 'half'
-                if ( $fe_mode =~ /half/i and $fe_auto =~ /off/i );
+                if ( $fe_mode =~ /half/i );
             $string = 'full'
-                if ( $fe_mode =~ /full/i and $fe_auto =~ /off/i );
-            $string = 'auto' if $fe_auto =~ /on/i;
+                if ( $fe_mode =~ /full/i );
         }
 
         my $idx;
@@ -365,7 +409,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::AlteonAD - SNMP Interface to Nortel Alteon Layer 2-7
+SNMP::Info::Layer3::AlteonAD - SNMP Interface to Radware Alteon ADC
 Switches.
 
 =head1 AUTHOR
@@ -389,8 +433,8 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Nortel Alteon Series Layer 2-7 load balancing
-switches and Nortel BladeCenter Layer2-3 GbE Switch Modules.
+Abstraction subclass for Radware Alteon Series ADC switches and
+Nortel BladeCenter Layer2-3 GbE Switch Modules.
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -438,12 +482,12 @@ These are methods that return scalar value from SNMP
 =item $alteon->model()
 
 Returns model type.  Checks $alteon->id() against the F<ALTEON-ROOT-MIB> and
-then parses out C<aceswitch>, replaces C<acedirector> with AD, and replaces
-copperModule/fiberModule with BladeCenter GbESM.
+then parses out C<aceswitch>, C<aws>, and C<ods> replaces C<acedirector>
+with AD, and replaces copperModule/fiberModule with BladeCenter GbESM.
 
 =item $alteon->vendor()
 
-Returns 'nortel'
+Returns 'radware'
 
 =item $alteon->os()
 
@@ -469,6 +513,18 @@ Returns the software version reported by C<agSoftwareVersion>
 
 (C<agTftpLastActionStatus>)
 
+=item $alteon->fan()
+
+(C<hwFanStatus>)
+
+=item $alteon->ps1_status()
+
+Returns status of primary power supply
+
+=item $alteon->ps2_status()
+
+Returns status of redundant power supply
+
 =back
 
 =head2 Globals imported from SNMP::Info::Layer3
@@ -477,8 +533,8 @@ See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
-These are methods that return tables of information in the form of a reference
-to a hash.
+These are methods that return tables of information in the form of a
+reference to a hash.
 
 =head2 Overrides
 

Info/Layer3/Altiga.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3;
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE 
             $int_include_vpn $fake_idx $type_class/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
             %SNMP::Info::Layer3::MIBS,
@@ -152,10 +152,6 @@ sub os {
     return 'altiga';
 }
 
-sub hasCDP {
-    return 0;
-}
-
 # $altiga->interfaces() - Map the Interfaces to their physical names
 # Add interface number to interface name to prevent duplicate ifDescr
 # Included statically configured VPN tunnels if ($int_include_vpn)
@@ -350,10 +346,6 @@ Tries to determine OS version from the C<sysDescr.0> field. Returns version or C
 
 Combines results from C<fan1_alarm>, C<fan2_alarm>, and C<fam3_alarm> methods.
 
-=item $altiga->hasCDP()
-
-No.
-
 =item $altiga->ps1_status()
 
 Combines C<ps1_3v_alarm> and C<ps1_5v_alarm> methods.

Info/Layer3/Arista.pm

@@ -43,7 +43,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -120,47 +120,25 @@ sub fw_port {
     return $arista->qb_fw_port($partial);
 }
 
-# Use LLDP
-
-sub hasCDP {
-    my $arista = shift;
-
-    return $arista->hasLLDP();
-}
-
-sub c_ip {
+# The LLDP MIB leaves it up in the air what the index means.
+# On EOS, it's a dot1d port.
+sub lldp_if {
     my $arista  = shift;
     my $partial = shift;
 
-    return $arista->lldp_ip($partial);
-}
+    # We pick a column that someone else is likely to want,
+    # so that the cache means that hopefully this doesn't
+    # cause any more SNMP transactions in total.
+    my $desc     = $arista->lldp_rem_desc($partial) || {};
+    my $bp_index = $arista->bp_index() || {};
 
-sub c_if {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_if($partial);
-}
-
-sub c_port {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_port($partial);
-}
-
-sub c_id {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_id($partial);
-}
-
-sub c_platform {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_rem_sysdesc($partial);
+    my $lldp_if = {};
+    foreach my $key ( keys %$desc ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        $lldp_if->{$key} = $bp_index->{$port};
+    }
+    return $lldp_if;
 }
 
 1;
@@ -232,10 +210,6 @@ These are methods that return scalar values from SNMP
 
     Returns 'Arista Networks, Inc.'
 
-=item $arista->hasCDP()
-
-    Returns whether LLDP is enabled.
-
 =item $arista->model()
 
 Tries to reference $arista->id() to one of the product MIBs listed above
@@ -279,26 +253,6 @@ Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
 
 Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
 
-=item $arista->c_id()
-
-Returns LLDP information.
-
-=item $arista->c_if()
-
-Returns LLDP information.
-
-=item $arista->c_ip()
-
-Returns LLDP information.
-
-=item $arista->c_platform()
-
-Returns LLDP information.
-
-=item $arista->c_port()
-
-Returns LLDP information.
-
 =item $arista->i_duplex_admin()
 
 Returns info from F<MAU-MIB>
@@ -307,6 +261,10 @@ Returns info from F<MAU-MIB>
 
 Returns info from F<MAU-MIB>
 
+=item $arista->lldp_if()
+
+Returns the mapping to the SNMP Interface Table.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3

Info/Layer3/BayRS.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Bridge;
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE %MODEL_MAP
     %MODID_MAP %PROCID_MAP/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -545,7 +545,7 @@ sub model {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub os {
@@ -1191,7 +1191,7 @@ sub e_vendor {
 
     my %wf_e_vendor;
     foreach my $iid ( keys %$wf_e_idx ) {
-        $wf_e_vendor{$iid} = 'nortel';
+        $wf_e_vendor{$iid} = 'avaya';
     }
     return \%wf_e_vendor;
 }
@@ -1378,7 +1378,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::BayRS - SNMP Interface to Nortel routers running BayRS.
+SNMP::Info::Layer3::BayRS - SNMP Interface to Avaya/Nortel routers running
+BayRS.
 
 =head1 AUTHOR
 
@@ -1401,7 +1402,7 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for routers running Nortel BayRS.  
+Abstraction subclass for routers running Avaya/Nortel BayRS.  
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -1474,7 +1475,7 @@ and the common model with this map :
 
 =item $bayrs->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $bayrs->os()
 
@@ -1583,7 +1584,7 @@ Returns reference to hash.  Key: IID, Value: Hardware version.
 
 =item $bayrs->e_vendor()
 
-Returns reference to hash.  Key: IID, Value: nortel.
+Returns reference to hash.  Key: IID, Value: avaya.
 
 =item $bayrs->e_serial()
 
@@ -1634,11 +1635,11 @@ See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =over
 
-=item $extreme->munge_hw_rev()
+=item $bayrs->munge_hw_rev()
 
 Converts octets to a decimal major.minor string.
 
-=item $extreme->munge_wf_serial()
+=item $bayrs->munge_wf_serial()
 
 Coverts octets to a decimal string.
 

Info/Layer3/BlueCoatSG.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,
@@ -113,7 +113,7 @@ Subclass for Blue Coat SG Series proxy devices
 
 =head2 Required MIBs
 
-BLUECOAT-SG-PROXY-MIB
+ BLUECOAT-SG-PROXY-MIB
 
 =over
 
@@ -141,7 +141,7 @@ Returns C<'sgos'>
 
 =item $router->os_ver()
 
-Tries to resolve version string from "sgProxyVersion"
+Tries to resolve version string from C<"sgProxyVersion">.
 
 =back
 

Info/Layer3/C3550.pm

@@ -64,7 +64,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -236,141 +236,6 @@ sub cisco_comm_indexing {
     return 1;
 }
 
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $c3550 = shift;
-    return $c3550->hasLLDP() || $c3550->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $c3550      = shift;
-    my $partial = shift;
-
-    my $cdp  = $c3550->SUPER::c_ip($partial) || {};
-    my $lldp = $c3550->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $c3550      = shift;
-    my $partial = shift;
-
-    my $cdp  = $c3550->SUPER::c_if($partial)  || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    # We need to match the lldp key with the ifIndex
-    # via lldpLocPortId and ifName
-    my $i_name = $c3550->ifName($partial) || {};
-    my $i_name_rev = {};
-    while ( my($key,$val) = each %$i_name ){
-	$i_name_rev->{$val} = $key;
-    }
-    my $loc_port_id = $c3550->lldpLocPortId($partial) || {};
-    my $lldp = $c3550->lldp_if($partial) || {};
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid} || next;
-	my $name = $loc_port_id->{$if} || next;
-	my $i_index = $i_name_rev->{$name} || next;
-        $c_if{$iid} = $i_index;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $c3550   = shift;
-    my $partial = shift;
-
-    my $lldp = $c3550->lldp_port($partial)     || {};
-    my $cdp  = $c3550->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $c3550   = shift;
-    my $partial = shift;
-
-    my $lldp = $c3550->lldp_id($partial)     || {};
-    my $cdp  = $c3550->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $c3550      = shift;
-    my $partial = shift;
-
-    my $lldp = $c3550->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $c3550->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
-
 1;
 __END__
 
@@ -494,23 +359,6 @@ Returns 1.  Use vlan indexing.
 
 =back
 
-=head2 Topology information
-
-Based upon the firmware version Cisco devices may support Link Layer Discovery 
-Protocol (LLDP) in addition to Cisco Discovery Protocol (CDP).  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
-
-=over
-
-=item $c3550->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=back
-
 =head2 Globals imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
@@ -556,40 +404,6 @@ See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=over 
-
-=item $c3550->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $c3550->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $c3550->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $c3550->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $c3550->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back 
-
 =head2 Overrides
 
 =over

Info/Layer3/C4000.pm

@@ -50,7 +50,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -106,6 +106,12 @@ $VERSION = '2.08';
 *SNMP::Info::Layer3::C4000::i_speed_admin
     = \&SNMP::Info::MAU::mau_i_speed_admin;
 
+*SNMP::Info::Layer3::C4000::set_i_duplex_admin
+    = \&SNMP::Info::MAU::mau_set_i_duplex_admin;
+*SNMP::Info::Layer3::C4000::set_i_speed_admin
+    = \&SNMP::Info::MAU::mau_set_i_speed_admin;
+
+
 sub fan {
     my $c4000     = shift;
     my $fan_state = $c4000->fan_state();
@@ -281,6 +287,18 @@ Returns either (auto,full,half).
 
 Returns administrative speed for interfaces.
 
+=item $c4000->set_i_speed_admin(speed, ifIndex)
+
+Sets port speed, must be supplied with speed and port C<ifIndex>.
+
+Speed choices are '10', '100', '1000', 'auto'.
+
+=item $c4000->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>.
+
+Duplex choices are 'auto', 'half', 'full'.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::CiscoVTP

Info/Layer3/C6500.pm

@@ -43,6 +43,7 @@ use SNMP::Info::CiscoPower;
 use SNMP::Info::Layer3;
 use SNMP::Info::CiscoStpExtensions;
 use SNMP::Info::CiscoVTP;
+use SNMP::Info::MAU;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
@@ -59,6 +60,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
     SNMP::Info::CiscoConfig
     SNMP::Info::CiscoPower
     SNMP::Info::Layer3
+    SNMP::Info::MAU
     Exporter
 /;
 
@@ -66,7 +68,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -75,15 +77,23 @@ $VERSION = '2.08';
 # The @ISA order should match these orders.
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,                %SNMP::Info::LLDP::MIBS,
-    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,    
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoPower::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,
+    'CISCO-VIRTUAL-SWITCH-MIB' => 'cvsSwitchMode',
 );
 
 %GLOBALS = (
+    %SNMP::Info::MAU::GLOBALS,
     %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::CiscoPower::GLOBALS,
     %SNMP::Info::CiscoConfig::GLOBALS,
@@ -98,22 +108,21 @@ $VERSION = '2.08';
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,                %SNMP::Info::LLDP::FUNCS,
-    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
+    %SNMP::Info::MAU::FUNCS,                %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoPower::FUNCS,         %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,  %SNMP::Info::CiscoImage::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,         %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,               %SNMP::Info::CiscoStack::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS, %SNMP::Info::CiscoVTP::FUNCS,
 );
 
-
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,                %SNMP::Info::LLDP::MUNGE,
-    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,    
+    %SNMP::Info::MAU::MUNGE,                %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoPower::MUNGE,         %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,  %SNMP::Info::CiscoImage::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,         %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,               %SNMP::Info::CiscoStack::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE, %SNMP::Info::CiscoVTP::MUNGE,
 );
 
 sub vendor {
@@ -179,6 +188,16 @@ sub i_duplex_admin {
     }
 }
 
+sub is_virtual_switch {
+    my $cvs = shift;
+    my $cvsSwM = $cvs->cvsSwitchMode() || '';
+
+    if ( $cvsSwM eq 'multiNode' ) {
+        return 1;
+    }
+    return 0;
+}
+
 sub set_i_duplex_admin {
 
     # map a textual duplex to an integer one the switch understands
@@ -186,6 +205,20 @@ sub set_i_duplex_admin {
 
     my $c6500 = shift;
     my ( $duplex, $iid ) = @_;
+ 
+    if ( $c6500->is_virtual_switch() ) {
+
+        # VSS -> MAU
+        # Due to VSS bug
+        # 1. Set the ifMauDefaultType
+        # 2. Disable ifMauAutoNegAdminStatus
+        # If the second set is not done, this is not going to be
+        # working... Cisco Bug id CSCty97033.
+        # SXI is not working (up to at least relase SXI9).
+        # SXJ is working at SXJ3 (not before).
+
+        return $c6500->mau_set_i_duplex_admin( $duplex, $iid );
+    }
 
     my $el_duplex = $c6500->el_duplex($iid);
 
@@ -203,137 +236,34 @@ sub set_i_duplex_admin {
         return $c6500->set_p_duplex( $duplexes{$duplex}, $iid );
     }
     else {
-        return $c6500->SUPER::set_i_duplex_admin;
+        return $c6500->SUPER::set_i_duplex_admin( $duplex, $iid );
     }
 }
 
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $c6500 = shift;
-
-    return $c6500->hasLLDP() || $c6500->SUPER::hasCDP();
-}
-
-sub c_ip {
+sub set_i_speed_admin {
     my $c6500   = shift;
-    my $partial = shift;
+    my ( $speed, $iid ) = @_;
 
-    my $cdp  = $c6500->SUPER::c_ip($partial) || {};
-    my $lldp = $c6500->lldp_ip($partial)     || {};
+    if ( $c6500->is_virtual_switch() ) {
 
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
+        # VSS -> MAU
+        # Due to VSS bug
+        # 1. Set the ifMauDefaultType
+        # 2. Disable ifMauAutoNegAdminStatus
+        # If the second set is not done, this is not going to be working...
+        # Cisco Bug id CSCty97033.
+        # SXI is not working (at least up to relase SXI9).
+        # SXJ is working at SXJ3 (not before).
 
-        $c_ip{$iid} = $ip;
+        return $c6500->mau_set_i_speed_admin( $speed, $iid );
     }
+    else {
 
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
+        # normal behavior using the CiscoStack method
+        return $c6500->SUPER::set_i_speed_admin( $speed, $iid );
     }
-    return \%c_ip;
 }
 
-sub c_if {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_if($partial)     || {};
-    my $cdp  = $c6500->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_port($partial)     || {};
-    my $cdp  = $c6500->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_id($partial)     || {};
-    my $cdp  = $c6500->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $c6500->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
-
 1;
 __END__
 
@@ -444,6 +374,14 @@ These are methods that return scalar value from SNMP
 
 Returns 1.  Use vlan indexing.
 
+=item $c6500->cvsSwitchMode()
+
+Returns the Switch status: multiNode or standalone.
+
+=item $c6500->is_virtual_switch()
+
+Return 1 if the switch (C<cvsSwitchMode>) is in multimode (VSS).
+
 =back
 
 =head2 Global Methods imported from SNMP::Info::CiscoVTP
@@ -529,52 +467,13 @@ Crosses $c6500->p_port() with $c6500->p_duplex() to utilize port C<ifIndex>.
     $c6500->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
         or die "Couldn't change port duplex. ",$c6500->error(1);
 
-=back
+=item $c6500->set_i_speed_admin(speed, ifIndex)
 
-=head2 Topology information
+Sets port speed, must be supplied with speed and port C<ifIndex>.
 
-Based upon the firmware version Cisco devices may support Link Layer Discover
-Protocol (LLDP) in addition to the Cisco-proprietary CDP.  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
+Speed choices are '10', '100', '1000'.
 
-=over
-
-=item $c6500->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=item $c6500->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $c6500->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $c6500->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $c6500->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $c6500->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+Crosses $c6500->p_port() with $c6500->p_speed() to utilize port C<ifIndex>.
 
 =back
 
@@ -613,11 +512,12 @@ See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
 
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for
+details.
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
 =cut
 

Info/Layer3/Cisco.pm

@@ -52,7 +52,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/CiscoASA.pm

@@ -0,0 +1,252 @@
+# SNMP::Info::Layer3::CiscoASA
+# $Id$
+#
+# Copyright (c) 2013 Moe Kraus
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoASA;
+
+use strict;
+use Exporter;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoRTT;
+use SNMP::Info::CiscoQOS;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
+use SNMP::Info::Layer3::Cisco;
+
+@SNMP::Info::Layer3::CiscoASA::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
+    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
+    SNMP::Info::Layer3::Cisco
+    SNMP::Info::Layer3
+    Exporter/;
+@SNMP::Info::Layer3::CiscoASA::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+       %SNMP::Info::Layer3::Cisco::MIBS,
+);
+
+%GLOBALS = (
+       %SNMP::Info::Layer3::Cisco::GLOBALS,
+);
+
+%FUNCS = (
+       %SNMP::Info::Layer3::Cisco::FUNCS,
+    'mac_table' => 'ifPhysAddress',
+);
+
+%MUNGE = (
+       %SNMP::Info::Layer3::Cisco::MUNGE,
+    'mac_table'  => \&SNMP::Info::munge_mac, );
+
+sub b_mac {
+       my ($asa) = shift;
+       my $macs = $asa->mac_table();
+       my @macs;
+       # gather physical addresses
+       foreach my $i ( keys %$macs ) {
+               my $mac = $macs->{$i};
+               # don't catch the bad macs with zeroed OUI
+               if ( $mac !~ m/(0{1,2}:){3}/ ) {
+                       push( @macs, $mac);
+               }
+               @macs = sort( @macs );
+       }
+       # return the least mac
+       return $macs[0];
+}
+
+sub i_description {
+    my $self = shift;
+    my $partial   = shift;
+
+    my $i_descr = $self->orig_i_description($partial) || {};
+
+    foreach my $ifindex ( keys %$i_descr ) {
+        $i_descr->{$ifindex} =~ /'(.*)'/;
+        $i_descr->{$ifindex} = $1
+            if defined $1;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoASA - Cisco Adaptive Security Appliance
+
+=head1 AUTHOR
+
+Moe Kraus
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $cisco = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $asa->class();
+ print "SNMP::Info determined this device to fall under subclass: $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Cisco ASA Devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3::Cisco
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-EIGRP-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $asa->b_mac()
+
+Returns base mac.
+Overrides base mac function in L<SNMP::Info::Layer3>.
+
+=item $asa->i_description()
+
+Overrides base interface description function in L<SNMP::Info> to return the
+configured interface name instead of "Adaptive Security Appliance
+'$configured interface name' interface".
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/CiscoFWSM.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3::Cisco;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::Cisco::MIBS,
@@ -202,17 +202,17 @@ to a hash.
 =item $fwsm->at_paddr()
 
 This function derives the at_paddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =item $fwsm->at_netaddr()
 
 This function derives the at_netaddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =item $fwsm->at_ifaddr()
 
 This function derives the at_ifaddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =back
 

Info/Layer3/Contivity.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Entity;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS, %SNMP::Info::Layer3::MIBS, %SNMP::Info::Entity::MIBS,
@@ -68,7 +68,7 @@ sub layers {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -162,8 +162,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Contivity - SNMP Interface to Nortel VPN Routers
-(Contivity Extranet Switches).
+SNMP::Info::Layer3::Contivity - SNMP Interface to Avaya/Nortel VPN Routers
+(formerly Contivity Extranet Switches).
 
 =head1 AUTHOR
 
@@ -186,7 +186,8 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Nortel VPN Routers (Contivity Extranet Switch).  
+Abstraction subclass for Avaya/Nortel VPN Routers (formerly Contivity
+Extranet Switch).  
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -227,7 +228,7 @@ These are methods that return scalar value from SNMP
 
 =item $contivity->vendor()
 
-Returns 'Nortel'
+Returns 'avaya'
 
 =item $contivity->model()
 

Info/Layer3/Dell.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -232,47 +232,6 @@ sub _vendor {
     }
 }
 
-# lldp support
-sub hasCDP {
-    my $dell = shift;
-    return $dell->hasLLDP();
-}
-
-sub c_ip {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_ip($partial);
-}
-
-sub c_if {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_if($partial);
-}
-
-sub c_port {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_port($partial);
-}
-
-sub c_id {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_id($partial);
-}
-
-sub c_platform {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_rem_sysdesc($partial);
-}
-
 1;
 __END__
 
@@ -368,10 +327,6 @@ id().  Defaults to 'dlink'.
 Returns 'dell', 'dlink', or 'ibm' based upon the IANA enterprise number in
 id().  Defaults to 'dlink'.
 
-=item $dell->hasCDP()
-
-Returns whether LLDP is enabled.
-
 =back
 
 =head2 Overrides
@@ -389,6 +344,10 @@ otherwise uses the Layer3 serial method.
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -464,30 +423,14 @@ Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
 the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
 C<Q-BRIDGE-MIB> doesn't return anything.
 
-=item $dell->c_id()
-
-Returns LLDP information.
-
-=item $dell->c_if()
-
-Returns LLDP information.
-
-=item $dell->c_ip()
-
-Returns LLDP information.
-
-=item $dell->c_platform()
-
-Returns LLDP information.
-
-=item $dell->c_port()
-
-Returns LLDP information.
-
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =cut

Info/Layer3/Enterasys.pm

@@ -44,7 +44,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::CDP::MIBS,
@@ -165,132 +165,67 @@ sub fw_port {
     return $enterasys->qb_fw_port($partial);
 }
 
-#  Use CDP and/or LLDP
+#  LLDP table timefilter implementation continuously increments when walked
+#  and we may never reach the end of the table.  This behavior can be
+#  modified with the "set snmp timefilter break disable" command,
+#  unfortunately it is not the default.  Query with a partial value of zero
+#  which means no time filter.
 
-sub hasCDP {
+sub lldp_ip {
     my $enterasys = shift;
+    my $partial   = shift || 0;
 
-    return $enterasys->hasLLDP() || $enterasys->SUPER::hasCDP();
+    return $enterasys->SUPER::lldp_ip($partial);
 }
 
-sub c_ip {
-    my $enterasys = shift;
-    my $partial   = shift;
+# [3564920] LLDP-MIB::lldpLocPortDesc isn't always unique,
+# use LLDP-MIB::lldpLocPortId this cross references to ifName
+sub lldp_if {
+    my $lldp    = shift;
+    my $partial = shift || 0;
 
-    my $cdp  = $enterasys->SUPER::c_ip($partial) || {};
-    my $lldp = $enterasys->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
+    my $addr    = $lldp->lldp_rem_pid($partial) || {};
+    my $i_descr = $lldp->ifName() || {};
+    my %r_i_descr = reverse %$i_descr;
+    
+    my %lldp_if;
+    foreach my $key ( keys %$addr ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        next unless $port;
+        # Local LLDP port may not equate to ifIndex
+        # Cross reference lldpLocPortId with ifName to get ifIndex
+        my $lldp_desc = $lldp->lldpLocPortId($port);
+        my $desc = $lldp_desc->{$port};
+        # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
+        if ( exists $r_i_descr{$desc} ) {
+            $port = $r_i_descr{$desc};
+        }
+        
+        $lldp_if{$key} = $port;
     }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
+    return \%lldp_if;
 }
 
-sub c_if {
+sub lldp_port {
     my $enterasys = shift;
-    my $partial   = shift;
+    my $partial   = shift || 0;
 
-    my $lldp = $enterasys->lldp_if($partial)     || {};
-    my $cdp  = $enterasys->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
+    return $enterasys->SUPER::lldp_port($partial);
 }
 
-sub c_port {
+sub lldp_id {
     my $enterasys = shift;
-    my $partial   = shift;
+    my $partial   = shift || 0;
 
-    my $lldp = $enterasys->lldp_port($partial)     || {};
-    my $cdp  = $enterasys->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
+    return  $enterasys->SUPER::lldp_id($partial);
 }
 
-sub c_id {
+sub lldp_platform {
     my $enterasys = shift;
-    my $partial   = shift;
+    my $partial   = shift || 0;
 
-    my $lldp = $enterasys->lldp_id($partial)     || {};
-    my $cdp  = $enterasys->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $enterasys = shift;
-    my $partial   = shift;
-
-    my $lldp = $enterasys->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $enterasys->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
+    return  $enterasys->SUPER::lldp_rem_sysdesc($partial);
 }
 
 1;
@@ -393,12 +328,6 @@ Returns base mac
 
 =back
 
-=head2 Overrides
-
-=over
-
-=back
-
 =head2 Globals imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
@@ -457,52 +386,25 @@ identifier (iid).
 
 =back
 
-=head2 Topology information
+=head2 Link Layer Discovery Protocol (LLDP) Overrides
 
-Based upon the firmware version Enterasys devices may support Cabletron
-Discovery Protocol (CTRON CDP), Cisco Discovery Protocol (CDP), Link Layer
-Discovery Protocol (LLDP), or all.  This module currently supports CDP and
-LLDP, but not CTRON CDP.  These methods will query both CDP and LLDP and
-return the combination of all information.  As a result, there may be
-identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
+The LLDP table time filter implementation continuously increments when
+walked and we may never reach the end of the table.  This behavior can be
+modified with the C<"set snmp timefilter break disable"> command,
+unfortunately it is not the default.  These methods are overridden to
+supply a partial value of zero which means no time filter.
 
 =over
 
-=item $enterasys->hasCDP()
+=item $enterasys->lldp_if()
 
-Returns true if the device is running either CDP or LLDP.
+=item $enterasys->lldp_ip()
 
-=item $enterasys->c_if()
+=item $enterasys->lldp_port()
 
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
+=item $enterasys->lldp_id()
 
-=item $enterasys->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $enterasys->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $enterasys->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $enterasys->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+=item $enterasys->lldp_platform()
 
 =back
 

Info/Layer3/Extreme.pm

@@ -1,7 +1,7 @@
 # SNMP::Info::Layer3::Extreme - SNMP Interface to Extreme devices
 # $Id$
 #
-# Copyright (c) 2008 Eric Miller
+# Copyright (c) 2012 Eric Miller
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
@@ -36,18 +36,23 @@ use strict;
 use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
+use SNMP::Info::LLDP;
+use SNMP::Info::EDP;
 
 @SNMP::Info::Layer3::Extreme::ISA
-    = qw/SNMP::Info::Layer3 SNMP::Info::MAU Exporter/;
+    = qw/SNMP::Info::Layer3 SNMP::Info::MAU SNMP::Info::LLDP
+    SNMP::Info::EDP Exporter/;
 @SNMP::Info::Layer3::Extreme::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::EDP::MIBS,
     'EXTREME-BASE-MIB'   => 'extremeAgent',
     'EXTREME-SYSTEM-MIB' => 'extremeSystem',
     'EXTREME-FDB-MIB'    => 'extremeSystem',
@@ -58,6 +63,8 @@ $VERSION = '2.08';
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::EDP::GLOBALS,
     'serial1'        => 'extremeSystemID.0',
     'temp'           => 'extremeCurrentTemperature',
     'ps1_status_old' => 'extremePrimaryPowerOperational.0',
@@ -70,20 +77,25 @@ $VERSION = '2.08';
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS,
     %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::EDP::FUNCS,
     'fan_state' => 'extremeFanOperational',
-
     # EXTREME-FDB-MIB:extremeFdbMacFdbTable
     'ex_fw_mac'    => 'extremeFdbMacFdbMacAddress',
     'ex_fw_port'   => 'extremeFdbMacFdbPortIfIndex',
     'ex_fw_status' => 'extremeFdbMacFdbStatus',
-
     # EXTREME-VLAN-MIB:extremeVlanIfTable
     'ex_vlan_descr'     => 'extremeVlanIfDescr',
     'ex_vlan_global_id' => 'extremeVlanIfGlobalIdentifier',
-
+    'ex_vlan_id'        => 'extremeVlanIfVlanId',
     # EXTREME-VLAN-MIB:extremeVlanEncapsIfTable
     'ex_vlan_encap_tag' => 'extremeVlanEncapsIfTag',
-
+    # EXTREME-VLAN-MIB:extremeVlanOpaqueTable
+    'ex_vlan_untagged'  => 'extremeVlanOpaqueUntaggedPorts',
+    'ex_vlan_tagged'    => 'extremeVlanOpaqueTaggedPorts',
+    # EXTREME-POE-MIB::extremePethPseSlotTable
+    'peth_power_watts'  => 'extremePethSlotPowerLimit',
+    # EXTREME-POE-MIB::extremePethPsePortTable
     'peth_port_power'   => 'extremePethPortMeasuredPower',
 );
 
@@ -92,12 +104,16 @@ $VERSION = '2.08';
     # Inherit all the built in munging
     %SNMP::Info::Layer3::MUNGE,
     %SNMP::Info::MAU::MUNGE,
-    'ex_fw_mac'      => \&SNMP::Info::munge_mac,
-    'ps1_status_old' => \&munge_true_ok,
-    'ps1_status_new' => \&munge_power_stat,
-    'ps2_status_old' => \&munge_power_stat,
-    'ps2_status_new' => \&munge_power_stat,
-    'fan_state'      => \&munge_true_ok,
+    %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::EDP::MUNGE,
+    'ex_fw_mac'        => \&SNMP::Info::munge_mac,
+    'ps1_status_old'   => \&munge_true_ok,
+    'ps1_status_new'   => \&munge_power_stat,
+    'ps2_status_old'   => \&munge_power_stat,
+    'ps2_status_new'   => \&munge_power_stat,
+    'fan_state'        => \&munge_true_ok,
+    'ex_vlan_untagged' => \&SNMP::Info::munge_port_list,
+    'ex_vlan_tagged'   => \&SNMP::Info::munge_port_list,
 );
 
 # Method OverRides
@@ -129,15 +145,24 @@ sub vendor {
 }
 
 sub os {
-    return 'extreme';
+    my $extreme = shift;
+
+    my $desc = $extreme->description();
+
+    if ( $desc =~ /xos/i ) {
+        return 'xos';
+    }
+
+    return 'extremeware';
 }
 
+
 sub os_ver {
     my $extreme = shift;
     my $descr   = $extreme->description();
     return unless defined $descr;
 
-    if ( $descr =~ m/Version\s+([^ ]+)/ ) {
+    if ( $descr =~ m/Version\s+([^ ]+)/i ) {
         return $1;
     }
 
@@ -178,7 +203,7 @@ sub i_ignore {
     my %i_ignore;
     foreach my $if ( keys %$i_description ) {
         if ( $i_description->{$if}
-            =~ /^(802.1Q Encapsulation Tag \d+|VLAN \d+|lo\d+)/i )
+            =~ /^(802.1Q Encapsulation Tag \d+|VLAN \d+|lo\d+|VirtualRouter\d+)/i )
         {
             $i_ignore{$if}++;
         }
@@ -191,6 +216,10 @@ sub i_ignore {
 # ifIndex.
 sub bp_index {
     my $extreme  = shift;
+
+    my $bindex = $extreme->SUPER::bp_index();
+    return $bindex if (keys %$bindex);
+
     my $if_index = $extreme->i_index();
 
     my %bp_index;
@@ -241,28 +270,54 @@ sub fan {
     return $ret;
 }
 
-# Newer versions of the Extreme firmware have vendor-specific tables
-# for this; those are ex_fw_*().  Older firmware versions don't have
-# these tables, so we use the BRIDGE-MIB tables.
+# For xos based VLAN functions we need to know how the ports are indexed
+# default is slot * 1000, but some older switches start at 1
+sub _slot_factor {
+    my $extreme = shift;
+    
+    my $index = $extreme->i_index();
+    
+    return 1 if (exists $index->{1} && $index->{1} == 1);
+    return 1000;
+}
+
+# Some versions of the Extreme firmware have vendor-specific tables
+# for this; those are ex_fw_*().  Some don't have these tables,
+# we use the BRIDGE-MIB tables if available then the ex_fw_*() methods.
 sub fw_mac {
     my $extreme = shift;
-    my $fw_mac  = $extreme->ex_fw_mac;
-    return $fw_mac if defined($fw_mac);
-    return $extreme->orig_fw_mac();
+    
+    my $b = $extreme->SUPER::fw_mac();
+    return $b if (keys %$b);
+
+    my $qb = $extreme->qb_fw_mac();
+    return $qb if (keys %$qb);
+    
+    return $extreme->ex_fw_mac();
 }
 
 sub fw_port {
     my $extreme = shift;
-    my $fw_port = $extreme->ex_fw_port;
-    return $fw_port if defined($fw_port);
-    return $extreme->orig_fw_port();
+    
+    my $b = $extreme->SUPER::fw_port();
+    return $b if (keys %$b);
+
+    my $qb = $extreme->qb_fw_port();
+    return $qb if (keys %$qb);
+    
+    return $extreme->ex_fw_port();
 }
 
 sub fw_status {
     my $extreme   = shift;
-    my $fw_status = $extreme->ex_fw_status;
-    return $fw_status if defined($fw_status);
-    return $extreme->orig_fw_status();
+
+    my $b = $extreme->SUPER::fw_status();
+    return $b if (keys %$b);
+
+    my $qb = $extreme->qb_fw_status();
+    return $qb if (keys %$qb);
+
+    return $extreme->ex_fw_status();
 }
 
 # Mapping the virtual VLAN interfaces:
@@ -303,7 +358,7 @@ sub _if2tag {
         }
     }
     if ($missed) {
-        my $global_id = $extreme->ex_vlan_global_id();
+        my $global_id = $extreme->ex_vlan_id();
         foreach my $if ( keys %if2tag ) {
             $if2tag{$if} = -$global_id->{$if}
                 if ( $if2tag{$if} == -1 && defined( $global_id->{$if} ) );
@@ -312,7 +367,7 @@ sub _if2tag {
     return \%if2tag;
 }
 
-# No partial support in v_name or v_index, because the obivous partial
+# No partial support in v_name or v_index, because the obvious partial
 # is the VLAN ID and the index here is the ifIndex of
 # the VLAN interface.
 sub v_name {
@@ -322,12 +377,66 @@ sub v_name {
 
 sub v_index {
     my $extreme = shift;
-    return $extreme->_if2tag();
+    return $extreme->ex_vlan_id || $extreme->_if2tag();
 }
 
 sub i_vlan {
     my $extreme    = shift;
     my $partial    = shift;
+
+    # Some devices support Q-Bridge, if so short circuit and return it
+    my $q_bridge = $extreme->SUPER::i_vlan($partial);
+    return $q_bridge if (keys %$q_bridge);
+
+    # Next we try extremeVlanOpaqueTable
+    my $xos = $extreme->_xos_i_vlan($partial);
+    return $xos if (keys %$xos);
+    
+    # Try older ifStack method
+    my $extremeware = $extreme->_extremeware_i_vlan($partial);
+    return $extremeware if (keys %$extremeware);
+    
+    return;
+}
+
+sub _xos_i_vlan {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $index   = $extreme->i_index();
+    my $vlans   = $extreme->ex_vlan_id() || {};
+    my $slotx   = $extreme->_slot_factor() || 1000;
+    my $u_ports = $extreme->ex_vlan_untagged() || {};
+
+    my $i_vlan = {};
+    foreach my $idx ( keys %$u_ports ) {
+        next unless ( defined $u_ports->{$idx} );
+        my $portlist = $u_ports->{$idx};
+        my $ret      = [];
+
+        my ( $vlan_if, $slot ) = $idx =~ /^(\d+)\.(\d+)/;
+        my $vlan = $vlans->{$vlan_if} || '';
+
+        # Convert portlist bit array to bp_index array
+        for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+            push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
+                if ( @$portlist[$i] );
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            $i_vlan->{$ifindex} = $vlan;
+        }
+    }
+    return $i_vlan;
+}
+
+sub _extremeware_i_vlan {
+    my $extreme    = shift;
+    my $partial    = shift;
     my $stack      = $extreme->ifStackStatus($partial);
     my $encap_tag  = $extreme->ex_vlan_encap_tag();
     my $vlan_descr = $extreme->ex_vlan_descr();
@@ -351,6 +460,65 @@ sub i_vlan {
 }
 
 sub i_vlan_membership {
+    my $extreme = shift;
+    my $partial = shift;
+
+    # Some devices support Q-Bridge, if so short circuit and return it
+    my $q_bridge = $extreme->SUPER::i_vlan_membership($partial);
+    return $q_bridge if (ref {} eq ref $q_bridge and scalar keys %$q_bridge);
+
+    # Next we try extremeVlanOpaqueTable
+    my $xos = $extreme->_xos_i_vlan_membership($partial);
+    return $xos if (ref {} eq ref $xos and scalar keys %$xos);
+    
+    # Try older ifStack method
+    my $extremeware = $extreme->_extremeware_i_vlan_membership($partial);
+    return $extremeware if (ref {} eq ref $extremeware and scalar keys %$extremeware);
+    
+    return;
+}
+
+sub _xos_i_vlan_membership {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $index   = $extreme->i_index();
+    my $vlans   = $extreme->ex_vlan_id();
+    my $slotx   = $extreme->_slot_factor() || 1000;
+    my $u_ports = $extreme->ex_vlan_untagged() || {};
+    my $t_ports = $extreme->ex_vlan_tagged() || {};
+
+    my $i_vlan_membership = {};
+    foreach my $idx ( keys %$u_ports ) {
+        next unless ( defined $u_ports->{$idx} );
+        my $u_portlist = $u_ports->{$idx};
+        my $t_portlist = $t_ports->{$idx};
+        my $ret        = [];
+
+        my ( $vlan_if, $slot ) = $idx =~ /^(\d+)\.(\d+)/;
+        my $vlan = $vlans->{$vlan_if} || '';
+
+        foreach my $portlist ( $u_portlist, $t_portlist ) {
+
+            # Convert portlist bit array to bp_index array
+            for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+                push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
+                    if ( @$portlist[$i] );
+            }
+
+            #Create HoA ifIndex -> VLAN array
+            foreach my $port ( @{$ret} ) {
+                my $ifindex = $index->{$port};
+                next unless ( defined($ifindex) );    # shouldn't happen
+                next if ( defined $partial and $ifindex !~ /^$partial$/ );
+                push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
+            }
+        }
+    }
+    return $i_vlan_membership;
+}
+
+sub _extremeware_i_vlan_membership {
     my $extreme    = shift;
     my $partial    = shift;
     my $stack      = $extreme->ifStackStatus($partial);
@@ -530,6 +698,28 @@ sub set_add_i_vlan_tagged {
     return $rv;
 }
 
+# LLDP uses the bridge index rather than ifIndex
+sub lldp_if {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $addr    = $extreme->lldp_rem_pid($partial) || {};
+    my $b_index = $extreme->bp_index() || {};
+    #my %r_i_descr = reverse %$i_descr;
+    
+    my %lldp_if;
+    foreach my $key ( keys %$addr ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        next unless $port;
+
+        my $idx = $b_index->{$port};
+
+        $lldp_if{$key} = $idx;
+    }
+    return \%lldp_if;
+}
+
 1;
 
 __END__
@@ -576,6 +766,10 @@ my $extreme = new SNMP::Info::Layer3::Extreme(...);
 
 =item SNMP::Info::MAU
 
+=item SNMP::Info::LLDP
+
+=item SNMP::Info::EDP
+
 =back
 
 =head2 Required MIBs
@@ -658,12 +852,6 @@ Returns base mac
 
 =back
 
-=head2 Overrides
-
-=over
-
-=back
-
 =head2 Globals imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
@@ -672,6 +860,14 @@ See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::EDP
+
+See documentation in L<SNMP::Info::EDP/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -716,6 +912,11 @@ Ignores VLAN meta interfaces and loopback
 
 (C<extremeFdbMacFdbStatus>)
 
+=item $extreme->lldp_if()
+
+Returns the mapping to the SNMP Interface Table. Extreme LLDP uses the
+bridge index rather than ifIndex.
+
 =item $extreme->i_vlan()
 
 Returns a mapping between C<ifIndex> and the VLAN.
@@ -756,7 +957,14 @@ F<EXTREME-FDB-MIB> rather than F<BRIDGE-MIB>.
 =item $extreme->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("extremePethPortMeasuredPower")
+
+(C<extremePethPortMeasuredPower>)
+
+=item $extreme->peth_power_watts()
+
+The configured maximum amount of in-line power available to the slot.
+
+(C<extremePethSlotPowerLimit>)
 
 =back
 
@@ -768,6 +976,14 @@ See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::EDP
+
+See documentation in L<SNMP::Info::EDP/"TABLE METHODS"> for details.
+
 =head1 SET METHODS
 
 These are methods that provide SNMP set functionality for overridden methods
@@ -818,7 +1034,6 @@ with the numeric VLAN ID and port C<ifIndex>.
   $extreme->set_remove_i_vlan_tagged('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't add port to egress list. ",$extreme->error(1);
 
-
 =back
 
 =head1 Data Munging Callback Subroutines

Info/Layer3/F5.pm

@@ -0,0 +1,416 @@
+# SNMP::Info::Layer3::F5
+#
+# Copyright (c) 2012 Eric Miller
+# All Rights Reserved
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::F5;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::F5::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::F5::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'F5-BIGIP-SYSTEM-MIB' => 'sysAttrArpMaxEntries',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'os_ver'     => 'sysProductVersion',
+    'mkt_name'   => 'sysPlatformInfoMarketingName',
+    'ps1_status' => 'sysChassisPowerSupplyStatus.1',
+    'ps2_status' => 'sysChassisPowerSupplyStatus.2',
+
+    # Named serial1 to override serial1 in L3 serial method
+    'serial1'  => 'sysGeneralChassisSerialNum',
+    'qb_vlans' => 'sysVlanNumber',
+    'ports'    => 'sysInterfaceNumber',
+
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+
+    # sysInterfaceTable
+    'i_index'       => 'sysInterfaceName',
+    'i_description' => 'sysInterfaceName',
+    'i_mtu'         => 'sysInterfaceMtu',
+    'i_speed'       => 'sysInterfaceMediaActiveSpeed',
+    'i_mac'         => 'sysInterfaceMacAddr',
+    'i_up_admin'    => 'sysInterfaceEnabled',
+    'i_up'          => 'sysInterfaceStatus',
+
+    # sysIfxStatTable
+    'i_octet_in'       => 'sysIfxStatHcInOctets',
+    'i_octet_out'      => 'sysIfxStatHcOutOctets',
+    'i_pkts_ucast_in'  => 'sysIfxStatHcInUcastPkts',
+    'i_pkts_ucast_out' => 'sysIfxStatHcOutUcastPkts',
+
+    # sysInterfaceStatTable
+    'i_discards_in'  => 'sysInterfaceStatDropsIn',
+    'i_discards_out' => 'sysInterfaceStatDropsOut',
+    'i_errors_in'    => 'sysInterfaceStatErrorsIn',
+    'i_errors_out'   => 'sysInterfaceStatErrorsOut',
+
+    # sysInterfaceTable
+    'sys_i_duplex' => 'sysInterfaceMediaActiveDuplex',
+
+    # sysChassisFanTable
+    'fan_state' => 'sysChassisFanStatus',
+
+    # sysVlanTable
+    'sys_v_id' => 'sysVlanId',
+    'v_name'   => 'sysVlanVname',
+
+    # sysVlanMemberTable
+    'sys_vm_tagged' => 'sysVlanMemberTagged',
+    'sys_vm_name'   => 'sysVlanMemberVmname',
+    'sys_vmp_name'  => 'sysVlanMemberParentVname',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'f5';
+}
+
+sub os {
+    return 'f5';
+}
+
+sub fan {
+    my $f5        = shift;
+    my $fan_state = $f5->fan_state();
+    my $ret       = "";
+    my $s         = "";
+    foreach my $i ( sort { $a <=> $b } keys %$fan_state ) {
+        $ret .= $s . $i . ": " . $fan_state->{$i};
+        $s = ", ";
+    }
+    return if ( $s eq "" );
+    return $ret;
+}
+
+sub model {
+    my $f5 = shift;
+
+    my $name = $f5->mkt_name();
+
+    if ( defined $name ) { return $name; }
+
+    my $id    = $f5->id();
+    my $model = &SNMP::translateObj($id);
+    if ( !defined $model ) { return $id; }
+
+    return $model;
+}
+
+# Override L3 interfaces
+sub interfaces {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->i_index($partial);
+}
+
+# Override L3 i_name
+sub i_name {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->i_index($partial);
+}
+
+# We don't have this, so fake it
+sub i_type {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $idx = $f5->i_index($partial);
+
+    my %i_type;
+    foreach my $if ( keys %$idx ) {
+
+        $i_type{$if} = 'ethernetCsmacd';
+    }
+    return \%i_type;
+}
+
+# Override L3 i_duplex
+sub i_duplex {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $duplexes = $f5->sys_i_duplex() || {};
+
+    my %i_duplex;
+    foreach my $if ( keys %$duplexes ) {
+        my $duplex = $duplexes->{$if};
+        next unless defined $duplex;
+        next if ( $duplex eq 'none' );
+
+        $i_duplex{$if} = $duplex;
+    }
+    return \%i_duplex;
+}
+
+# Override Bridge v_index
+sub v_index {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->sys_v_id($partial);
+}
+
+sub i_vlan {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan = {};
+    foreach my $iid ( keys %$tagged ) {
+        my $tag = $tagged->{$iid};
+        next if ( $tag eq 'true' );
+
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        $i_vlan->{$idx} = $vlan;
+    }
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan_membership = {};
+    foreach my $iid ( keys %$tagged ) {
+
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        push( @{ $i_vlan_membership->{$idx} }, $vlan );
+    }
+    return $i_vlan_membership;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::F5 - SNMP Interface to F5 network devices.
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $f5 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $f5->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for F5 network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $f5 = new SNMP::Info::Layer3::F5(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<F5-BIGIP-COMMON-MIB>
+
+=item F<F5-BIGIP-SYSTEM-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $f5->model()
+
+Return (C<sysPlatformInfoMarketingName>), otherwise tries to reference
+$f5->id() to F<F5-BIGIP-COMMON-MIB>. 
+
+=item $f5->vendor()
+
+Returns 'f5'
+
+=item $f5->os()
+
+Returns 'f5'
+
+=item $f5->os_ver()
+
+Returns the software version reported by C<sysProductVersion>
+
+=item $f5->fan()
+
+Combines (C<sysChassisFanStatus>) into a single string.
+
+=item $f5->ps1_status()
+
+Returns status of primary power supply
+
+=item $f5->ps2_status()
+
+Returns status of redundant power supply
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $f5->interfaces()
+
+Returns reference to the map between IID and physical port.
+
+(C<sysInterfaceName>).
+
+=item $f5->i_duplex()
+
+Returns reference to hash.  Maps port operational duplexes to IIDs.
+
+=item $f5->i_vlan()
+
+Returns a mapping between C<ifIndex> and the default VLAN.
+
+=item $f5->i_vlan_membership()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.
+
+  Example:
+  my $interfaces = $f5->interfaces();
+  my $vlans      = $f5->i_vlan_membership();
+  
+  foreach my $iid (sort keys %$interfaces) {
+    my $port = $interfaces->{$iid};
+    my $vlan = join(',', sort(@{$vlans->{$iid}}));
+    print "Port: $port VLAN: $vlan\n";
+  }
+
+=item $f5->v_index()
+
+Returns VLAN IDs
+
+=item $f5->v_name()
+
+Human-entered name for vlans.
+
+=item $f5->i_name()
+
+Returns the human set port name if exists.
+
+=item $f5->i_type()
+
+Returns C<'ethernetCsmacd'> for each C<ifIndex>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Force10.pm

@@ -0,0 +1,333 @@
+# SNMP::Info::Layer3::Force10
+# $Id$
+#
+# Copyright (c) 2012 William Bulley
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Force10;
+
+use strict;
+use Exporter;
+
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Force10::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Force10::EXPORT_OK = qw//;
+
+use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'F10-PRODUCTS-MIB' => 'f10Products',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::Force10::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::Force10::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub vendor {
+    return 'force10';
+}
+
+sub os {
+    return 'ftos';
+}
+
+sub os_ver {
+    my $force10 = shift;
+    my $descr   = $force10->description();
+    my $os_ver  = undef;
+
+    $os_ver = $1 if ( $descr =~ /Force10\s+Application\s+Software\s+Version:\s+(\S+)/s );
+
+    return $os_ver;
+}
+
+sub model {
+    my $force10 = shift;
+    my $id      = $force10->id();
+
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    return $model;
+}
+
+# Use Q-BRIDGE-MIB
+
+sub fw_mac {
+    my $force10 = shift;
+    my $partial = shift;
+
+    return $force10->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $force10 = shift;
+    my $partial = shift;
+
+    return $force10->qb_fw_port($partial);
+}
+
+sub v_name {
+    my $force10 = shift;
+    my $partial = shift;
+
+    return $force10->qb_v_name($partial);
+}
+
+# ------------------- stub for now-----------------
+sub i_vlan {
+    my $force10 = shift;
+    my $partial = shift;
+
+    my $i_vlan = {};
+
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $force10 = shift;
+    my $partial = shift;
+
+    my $index = $force10->bp_index();
+    my $v_index = $force10->v_index();
+
+    my $v_ports  = $force10->qb_v_egress();
+
+    # If given a partial it will be an ifIndex, we need to use dot1dBasePort
+    if ($partial) {
+        my %r_index = reverse %$index;
+        $partial    = $r_index{$partial};
+    }
+
+    my $i_vlan_membership = {};
+
+    foreach my $idx ( sort keys %{$v_ports} ) {
+        next unless ( defined $v_ports->{$idx} );
+        my $portlist = $v_ports->{$idx}; # is an array reference
+        my $ret      = [];
+        my $vlan_ndx = $idx;
+
+        # Convert portlist bit array to bp_index array
+        for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+            push( @{$ret}, $i + 1 ) if ( @$portlist[$i] );
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            my $vlan_tag = $v_index->{$vlan_ndx};
+
+            # FIXME: would be preferable to use
+            # the mapping from Q-BRIDGE-MIB::dot1qVlanFdbId 
+            my $mod = $vlan_tag % 4096;
+
+            push ( @{ $i_vlan_membership->{$ifindex} }, ($mod) );
+        }
+    }
+
+    return $i_vlan_membership;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Force10 - SNMP Interface to Force10 Networks FTOS
+
+=head1 AUTHOR
+
+William Bulley
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $force10 = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $force10->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Force10 Networks FTOS-based devices.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::MAU
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<F10-PRODUCTS-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP:
+
+=over
+
+=item $force10->vendor()
+
+Returns C<'force10'>
+
+=item $force10->model()
+
+Tries to reference $force10->id() to the Force10 product MIB listed above.
+
+=item $force10->os()
+
+Returns C<'ftos'>.
+
+=item $force10->os_ver()
+
+Grabs the operating system version from C<sysDescr>
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $force10->v_name()
+
+Returns the VLAN names.
+
+=item $force10->i_vlan()
+
+Currently not implemented.
+
+=item $force10->i_vlan_membership()
+
+Returns reference to hash of arrays:
+key = C<ifIndex>, value = array of VLAN IDs.
+These are the VLANs which are members of the egress list for the port.
+
+=item $force10->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $force10->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $force10->i_duplex_admin()
+
+Returns info from F<MAU-MIB>
+
+=item $force10->i_speed_admin()
+
+Returns info from F<MAU-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Foundry.pm

@@ -44,7 +44,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -53,6 +53,8 @@ $VERSION = '2.08';
     'FOUNDRY-SN-ROOT-MIB'         => 'foundry',
     'FOUNDRY-SN-AGENT-MIB'        => 'snChasPwrSupplyDescription',
     'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snSwGroupOperMode',
+    'FOUNDRY-SN-STACKING-MIB'     => 'snStackingOperUnitRole',
+    'FOUNDRY-POE-MIB'             => 'snAgentPoeGblPowerCapacityTotal',
 );
 
 %GLOBALS = (
@@ -65,6 +67,8 @@ $VERSION = '2.08';
     'ps1_type'   => 'snChasPwrSupplyDescription.1',
     'ps1_status' => 'snChasPwrSupplyOperStatus.1',
     'fan'        => 'snChasFanOperStatus.1',
+    'img_ver'    => 'snAgImgVer',
+    'ch_serial'  => 'snChasSerNum',
 
 );
 
@@ -79,11 +83,20 @@ $VERSION = '2.08';
     'sw_duplex' => 'snSwPortInfoChnMode',
     'sw_type'   => 'snSwPortInfoMediaType',
     'sw_speed'  => 'snSwPortInfoSpeed',
+
+    # FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Table
+    'ag_mod2_type' => 'snAgentConfigModule2Type',
+
+    # FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleTable
+    'ag_mod_type' => 'snAgentConfigModuleType',
+
 );
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::FDP::MUNGE,
+    'ag_mod2_type' => \&SNMP::Info::munge_e_type,
+    'ag_mod_type'  => \&SNMP::Info::munge_e_type,
 );
 
 sub i_ignore {
@@ -155,17 +168,17 @@ sub model {
 }
 
 sub os {
-    return 'foundry';
+    return 'brocade';
 }
 
 sub vendor {
-    return 'foundry';
+    return 'brocade';
 }
 
 sub os_ver {
     my $foundry = shift;
 
-    return $foundry->snAgImgVer() if ( defined $foundry->snAgImgVer() );
+    return $foundry->img_ver() if ( defined $foundry->img_ver() );
 
     # Some older ones don't have this value,so we cull it from the description
     my $descr = $foundry->description();
@@ -204,10 +217,10 @@ sub serial {
     my $foundry = shift;
 
     # Return chassis serial number if available
-    return $foundry->snChasSerNum() if ( $foundry->snChasSerNum() );
+    return $foundry->ch_serial() if ( $foundry->ch_serial() );
 
     # If no chassis serial use first module serial
-    my $mod_serials = $foundry->snAgentConfigModuleSerialNumber();
+    my $mod_serials = $foundry->snAgentConfigModuleSerialNumber() || {};
 
     foreach my $mod ( sort keys %$mod_serials ) {
         my $serial = $mod_serials->{$mod} || '';
@@ -268,132 +281,507 @@ sub stp_p_state {
 
 }
 
-#  Use FDP and/or LLDP
+# Entity MIB is supported on the Brocade NetIron XMR, NetIron MLX, MLXe,
+# NetIron CES, NetIron CER, and older EdgeIron series devices.
+# Try Entity MIB methods first and fall back to Pseudo ENTITY-MIB methods for
+# other devices.
+# e_fwver, e_hwver, e_swver not supported in psuedo methods, no need to
+# override
 
-sub hasCDP {
-    my $foundry = shift;
-
-    return $foundry->hasLLDP() || $foundry->SUPER::hasCDP();
-}
-
-sub c_ip {
+sub e_index {
     my $foundry = shift;
     my $partial = shift;
 
-    my $cdp  = $foundry->SUPER::c_ip($partial) || {};
-    my $lldp = $foundry->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
+    return $foundry->SUPER::e_index($partial)
+        || $foundry->brcd_e_index($partial);
 }
 
-sub c_if {
+sub e_class {
     my $foundry = shift;
     my $partial = shift;
 
-    my $lldp = $foundry->lldp_if($partial)     || {};
-    my $cdp  = $foundry->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
+    return $foundry->SUPER::e_class($partial)
+        || $foundry->brcd_e_class($partial);
 }
 
-sub c_port {
+sub e_descr {
     my $foundry = shift;
     my $partial = shift;
 
-    my $lldp = $foundry->lldp_port($partial)     || {};
-    my $cdp  = $foundry->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
+    return $foundry->SUPER::e_descr($partial)
+        || $foundry->brcd_e_descr($partial);
 }
 
-sub c_id {
+sub e_name {
     my $foundry = shift;
     my $partial = shift;
 
-    my $lldp = $foundry->lldp_id($partial)     || {};
-    my $cdp  = $foundry->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
+    return $foundry->SUPER::e_name($partial)
+        || $foundry->brcd_e_name($partial);
 }
 
-sub c_platform {
+sub e_parent {
     my $foundry = shift;
     my $partial = shift;
 
-    my $lldp = $foundry->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $foundry->SUPER::c_platform($partial) || {};
+    return $foundry->SUPER::e_parent($partial)
+        || $foundry->brcd_e_parent($partial);
+}
 
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
+sub e_pos {
+    my $foundry = shift;
+    my $partial = shift;
 
-        $c_platform{$iid} = $platform;
+    return $foundry->SUPER::e_pos($partial) || $foundry->brcd_e_pos($partial);
+}
+
+sub e_serial {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_serial($partial)
+        || $foundry->brcd_e_serial($partial);
+}
+
+sub e_type {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_type($partial)
+        || $foundry->brcd_e_type($partial);
+}
+
+sub e_vendor {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_vendor($partial)
+        || $foundry->brcd_e_vendor($partial);
+}
+
+# Pseudo ENTITY-MIB methods
+
+# This class supports both stackable and chassis based switches, identify if
+# we have a stackable so that we return appropriate entPhysicalClass
+
+# Identify if the stackable is actually a stack vs. single switch
+sub _brcd_stack_master {
+    my $foundry = shift;
+
+    my $roles = $foundry->snStackingOperUnitRole() || {};
+
+    foreach my $iid ( keys %$roles ) {
+        my $role = $roles->{$iid};
+        next unless $role;
+        if ( $role eq 'active' ) {
+            return $iid;
+        }
+    }
+    return;
+}
+
+sub brcd_e_index {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $stack_master = $foundry->_brcd_stack_master();
+    my $brcd_e_idx 
+        = $foundry->snAgentConfigModule2Description($partial)
+        || $foundry->snAgentConfigModuleDescription($partial)
+        || {};
+
+    my %brcd_e_index;
+    if ($stack_master) {
+
+        # Stack Entity
+        $brcd_e_index{0} = 1;
     }
 
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
+    foreach my $iid ( keys %$brcd_e_idx ) {
 
-        $c_platform{$iid} = $platform;
+        my $index = $iid;
+
+        # Format into consistent integer format so that numeric sorting works
+        if ( $iid =~ /(\d+)\.(\d+)/ ) {
+            $index = "$1" . sprintf "%02d", $2;
+        }
+        $brcd_e_index{$iid} = $index;
     }
-    return \%c_platform;
+    return \%brcd_e_index;
+}
+
+sub brcd_e_class {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %e_class;
+    foreach my $iid ( keys %$e_idx ) {
+        if ( $iid == 0 ) {
+            $e_class{$iid} = 'stack';
+        }
+
+        # Were going to assume chassis at slot/index 1
+        # If this turns out to be false in some cases we can check
+        # snAgentConfigModuleNumberOfCpus as other modules won't have cpus?
+        elsif ( $iid =~ /1$/ ) {
+            $e_class{$iid} = 'chassis';
+        }
+        else {
+            $e_class{$iid} = 'module';
+        }
+    }
+    return \%e_class;
+}
+
+sub brcd_e_descr {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $brcd_e_idx = $foundry->brcd_e_index($partial) || {};
+    my $m_descrs 
+        = $foundry->snAgentConfigModule2Description($partial)
+        || $foundry->snAgentConfigModuleDescription($partial)
+        || {};
+
+    my %brcd_e_descr;
+    foreach my $iid ( keys %$brcd_e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_descr{$iid} = $foundry->description();
+        }
+
+        my $descr = $m_descrs->{$iid};
+        next unless defined $descr;
+
+        $brcd_e_descr{$iid} = $descr;
+    }
+    return \%brcd_e_descr;
+}
+
+sub brcd_e_name {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $stack_master = $foundry->_brcd_stack_master();
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_name;
+    foreach my $iid ( keys %$e_idx ) {
+        if ( $iid == 0 ) {
+            $brcd_e_name{$iid} = 'Stack Master Unit';
+        }
+
+        elsif ( $stack_master && $iid =~ /(\d+)\.1$/ ) {
+            $brcd_e_name{$iid} = "Switch Stack Unit $1";
+        }
+        elsif ( $iid =~ /1$/ ) {
+            $brcd_e_name{$iid} = "Switch";
+        }
+        else {
+            $brcd_e_name{$iid} = 'Module';
+        }
+    }
+    return \%brcd_e_name;
+}
+
+sub brcd_e_vendor {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_vendor;
+    foreach my $iid ( keys %$e_idx ) {
+        my $vendor = 'brocade';
+
+        $brcd_e_vendor{$iid} = $vendor;
+    }
+    return \%brcd_e_vendor;
+}
+
+sub brcd_e_serial {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+    my $serials 
+        = $foundry->snAgentConfigModule2SerialNumber($partial)
+        || $foundry->snAgentConfigModuleSerialNumber($partial)
+        || {};
+
+    my %brcd_e_serial;
+    foreach my $iid ( keys %$e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_serial{$iid} = $foundry->serial();
+        }
+
+        my $serial = $serials->{$iid};
+        next unless defined $serial;
+
+        $brcd_e_serial{$iid} = $serial;
+    }
+    return \%brcd_e_serial;
+}
+
+sub brcd_e_type {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+    my $types 
+        = $foundry->ag_mod2_type($partial)
+        || $foundry->ag_mod_type($partial)
+        || {};
+
+    my %brcd_e_type;
+    foreach my $iid ( keys %$e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_type{$iid} = $foundry->model();
+        }
+
+        my $type = $types->{$iid};
+        next unless defined $type;
+
+        $brcd_e_type{$iid} = $type;
+    }
+    return \%brcd_e_type;
+}
+
+sub brcd_e_pos {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_pos;
+    foreach my $iid ( keys %$e_idx ) {
+
+        my $pos;
+        if ( $iid == 0 ) {
+            $pos = -1;
+        }
+        elsif ( $iid =~ /(\d+)\.1$/ ) {
+            $pos = $1;
+        }
+        elsif ( $iid =~ /(\d+)$/ ) {
+            $pos = $1;
+        }
+
+        $brcd_e_pos{$iid} = $pos;
+    }
+    return \%brcd_e_pos;
+}
+
+sub brcd_e_parent {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $stack_master = $foundry->_brcd_stack_master();
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_parent;
+    foreach my $iid ( keys %$e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_parent{$iid} = 0;
+        }
+        elsif ( $stack_master && $iid =~ /(\d+)\.1$/ ) {
+            $brcd_e_parent{$iid} = 1;
+        }
+        elsif ( $iid =~ /1$/ ) {
+            $brcd_e_parent{$iid} = 0;
+        }
+        elsif ( $iid =~ /(\d+).\d+/ ) {
+            $brcd_e_parent{$iid} = "$1" . "01";
+        }
+
+        # assume non-stacked and chassis at index 1
+        else {
+            $brcd_e_parent{$iid} = 1;
+        }
+    }
+    return \%brcd_e_parent;
+}
+
+# The index of snAgentPoePortTable is snAgentPoePortNumber which equals
+# ifIndex; however, to emulate POWER-ETHERNET-MIB we need a "module.port"
+# index.  If ifDescr has the format x/x/x use it to determine the module
+# otherwise default to 1.  Unfortunately, this means we can't map any
+# snAgentPoePortTable leafs directly and partials will not be supported.
+sub peth_port_ifindex {
+    my $foundry = shift;
+
+    my $indexes = $foundry->snAgentPoePortNumber();
+    my $descrs  = $foundry->i_description();
+
+    my $peth_port_ifindex = {};
+    foreach my $i ( keys %$indexes ) {
+        my $descr = $descrs->{$i};
+        next unless $descr;
+
+        my $new_idx = "1.$i";
+
+        if ( $descr =~ /(\d+)\/\d+\/\d+/ ) {
+            $new_idx = "$1.$i";
+        }
+        $peth_port_ifindex->{$new_idx} = $i;
+    }
+    return $peth_port_ifindex;
+}
+
+sub peth_port_admin {
+    my $foundry = shift;
+
+    my $p_index      = $foundry->peth_port_ifindex()     || {};
+    my $admin_states = $foundry->snAgentPoePortControl() || {};
+
+    my $peth_port_admin = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $state = $admin_states->{$port};
+
+        if ( $state =~ /enable/ ) {
+            $peth_port_admin->{$i} = 'true';
+        }
+        else {
+            $peth_port_admin->{$i} = 'false';
+        }
+    }
+    return $peth_port_admin;
+}
+
+sub peth_port_neg_power {
+    my $foundry = shift;
+
+    my $p_index         = $foundry->peth_port_ifindex()   || {};
+    my $peth_port_class = $foundry->snAgentPoePortClass() || {};
+
+    my $poemax = {
+        '0' => 12950,
+        '1' => 3840,
+        '2' => 6490,
+        '3' => 12950,
+        '4' => 25500
+    };
+
+    my $peth_port_neg_power = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $power = $poemax->{ $peth_port_class->{$port} };
+        next unless $power;
+
+        $peth_port_neg_power->{$i} = $power;
+    }
+    return $peth_port_neg_power;
+}
+
+sub peth_port_power {
+    my $foundry = shift;
+
+    my $p_index       = $foundry->peth_port_ifindex()      || {};
+    my $port_consumed = $foundry->snAgentPoePortConsumed() || {};
+
+    my $peth_port_power = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $power = $port_consumed->{$port};
+        next unless $power;
+
+        $peth_port_power->{$i} = $power;
+    }
+    return $peth_port_power;
+}
+
+sub peth_port_class {
+    my $foundry = shift;
+
+    my $p_index    = $foundry->peth_port_ifindex()   || {};
+    my $port_class = $foundry->snAgentPoePortClass() || {};
+
+    my $peth_port_class = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $power = $port_class->{$port};
+        next unless $power;
+
+        $peth_port_class->{$i} = "class$power";
+    }
+    return $peth_port_class;
+}
+
+sub peth_port_status {
+    my $foundry = shift;
+
+    my $p_index      = $foundry->peth_port_ifindex()     || {};
+    my $admin_states = $foundry->snAgentPoePortControl() || {};
+
+    my $peth_port_status = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $state = $admin_states->{$port};
+
+        if ( $state =~ /enable/ ) {
+            $peth_port_status->{$i} = 'deliveringPower';
+        }
+        else {
+            $peth_port_status->{$i} = 'disabled';
+        }
+    }
+    return $peth_port_status;
+}
+
+sub peth_power_status {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $watts = $foundry->snAgentPoeUnitPowerCapacityTotal($partial) || {};
+
+    my $peth_power_status = {};
+    foreach my $i ( keys %$watts ) {
+        $peth_power_status->{$i} = 'on';
+    }
+    return $peth_power_status;
+}
+
+sub peth_power_watts {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $watts_total = $foundry->snAgentPoeUnitPowerCapacityTotal($partial)
+        || {};
+
+    my $peth_power_watts = {};
+    foreach my $i ( keys %$watts_total ) {
+        my $total = $watts_total->{$i};
+        next unless $total;
+
+        $peth_power_watts->{$i} = $total / 1000;
+    }
+    return $peth_power_watts;
+}
+
+sub peth_power_consumption {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $watts_total = $foundry->snAgentPoeUnitPowerCapacityTotal($partial)
+        || {};
+    my $watts_free = $foundry->snAgentPoeUnitPowerCapacityFree($partial)
+        || {};
+
+    my $peth_power_consumed = {};
+    foreach my $i ( keys %$watts_total ) {
+        my $total = $watts_total->{$i};
+        next unless $total;
+        my $free = $watts_free->{$i} || 0;
+
+        $peth_power_consumed->{$i} = ( $total - $free ) / 1000;
+    }
+    return $peth_power_consumed;
 }
 
 1;
@@ -401,7 +789,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Foundry - SNMP Interface to Foundry Network Devices
+SNMP::Info::Layer3::Foundry - SNMP Interface to Brocade (Foundry) Network
+Devices
 
 =head1 AUTHOR
 
@@ -425,7 +814,7 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Foundry Networks devices.
+Abstraction subclass for Brocade (Foundry) Networks devices.
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above.
@@ -454,6 +843,10 @@ after determining a more specific class using the method above.
 
 =item F<FOUNDRY-SN-SWITCH-GROUP-MIB>
 
+=item F<FOUNDRY-SN-STACKING-MIB>
+
+=item F<FOUNDRY-POE-MIB>
+
 =item Inherited Classes' MIBs
 
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
@@ -477,11 +870,11 @@ and removes 'C<sn>'.  EdgeIron models determined through F<ENTITY-MIB>.
 
 =item $foundry->vendor()
 
-Returns 'foundry'
+Returns 'brocade'
 
 =item $foundry->os()
 
-Returns 'foundry'
+Returns 'brocade'
 
 =item $foundry->os_ver()
 
@@ -527,6 +920,18 @@ Returns the status of the chassis fan.
 
 (C<snChasFanOperStatus.1>)
 
+=item $foundry->img_ver()
+
+Returns device image version.
+
+(C<snAgImgVer.0>)
+
+=item $foundry->ch_serial()
+
+Returns chassis serial number.
+
+(C<snChasSerNum.0>)
+
 =back
 
 =head2 Global Methods imported from SNMP::Info::Layer3
@@ -543,8 +948,8 @@ See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
-These are methods that return tables of information in the form of a reference
-to a hash.
+These are methods that return tables of information in the form of a
+reference to a hash.
 
 =head2 Overrides
 
@@ -577,6 +982,130 @@ Skipped if device is an EdgeIron 24G due to reports of hangs.
 
 =back
 
+=head2 F<ENTITY-MIB> Information
+
+F<ENTITY-MIB> is supported on the Brocade NetIron XMR, NetIron MLX, MLXe,
+NetIron CES, NetIron CER, and older EdgeIron series devices.  For other
+devices which do not support it, these methods emulate Physical Table methods
+using F<FOUNDRY-SN-AGENT-MIB>.  See Pseudo F<ENTITY-MIB> information below
+for details on brcd_e_* methods.
+
+=over
+
+=item $foundry->e_index() 
+
+If the device doesn't support C<entPhysicalDescr>, this will
+try brcd_e_index().
+
+Note that this is based on C<entPhysicalDescr> due to implementation
+details of SNMP::Info::Entity::e_index().
+
+=item $foundry->e_class() 
+
+If the device doesn't support C<entPhysicalClass>, this will try
+brcd_e_class().
+
+=item $foundry->e_descr() 
+
+If the device doesn't support C<entPhysicalDescr>, this will try
+brcd_e_descr().
+
+=item $foundry->e_name() 
+
+If the device doesn't support C<entPhysicalName>, this will try
+brcd_e_name().
+
+=item $foundry->e_parent() 
+
+If the device doesn't support C<entPhysicalContainedIn>, this will try
+brcd_e_parent().
+
+=item $foundry->e_pos() 
+
+If the device doesn't support C<entPhysicalParentRelPos>, this will try
+brcd_e_pos().
+
+=item $foundry->e_serial() 
+
+If the device doesn't support C<entPhysicalSerialNum>, this will try
+brcd_e_serial().
+
+=item $foundry->e_type() 
+
+If the device doesn't support C<entPhysicalVendorType>, this will try
+brcd_e_type().
+
+=item $foundry->e_vendor() 
+
+If the device doesn't support C<entPhysicalMfgName>, this will try
+brcd_e_vendor().
+
+=back
+
+=head2 Pseudo F<ENTITY-MIB> information
+
+These methods emulate F<ENTITY-MIB> Physical Table methods using
+F<FOUNDRY-SN-AGENT-MIB>. 
+
+=over
+
+=item $foundry->brcd_e_index()
+
+Returns reference to hash.  Key: IID, Value: Integer, Indices are combined
+into an integer, each index is two digits padded with leading zero if
+required.
+
+=item $foundry->brcd_e_class()
+
+Returns reference to hash.  Key: IID, Value: General hardware type.
+
+Returns 'stack' for the stack master in an active stack, 'chassis' for
+base switches that contain modules, and 'module' for others.
+
+=item $foundry->brcd_e_descr()
+
+Returns reference to hash.  Key: IID, Value: Human friendly name
+
+(C<snAgentConfigModule2Description>) or
+(C<snAgentConfigModuleDescription>) 
+
+=item $foundry->brcd_e_name()
+
+Returns reference to hash.  Key: IID, Value: Human friendly name
+
+=item $foundry->brcd_e_vendor()
+
+Returns reference to hash.  Key: IID, Value: brocade
+
+=item $foundry->brcd_e_serial()
+
+Returns reference to hash.  Key: IID, Value: Serial number
+
+Serial number is $foundry->serial() for a stack master unit and 
+(C<snAgentConfigModule2SerialNumber>) or
+(C<snAgentConfigModuleSerialNumber>) for all others.
+
+=item $foundry->brcd_e_type()
+
+Returns reference to hash.  Key: IID, Value: Type of component/sub-component
+as defined under C<snAgentConfigModule2Type> or C<snAgentConfigModule2Type> 
+in F<FOUNDRY-SN-AGENT-MIB>.
+
+=item $foundry->brcd_e_pos()
+
+Returns reference to hash.  Key: IID, Value: The relative position among all
+entities sharing the same parent.
+
+(C<s5ChasComSubIndx>)
+
+=item $foundry->brcd_e_parent()
+
+Returns reference to hash.  Key: IID, Value: The value of brcd_e_index()
+for the entity which 'contains' this entity.  A value of zero indicates
+this entity is not contained in any other entity.
+
+=back
+
 =head2 Foundry Switch Port Information Table (C<snSwPortIfTable>)
 
 =over
@@ -607,51 +1136,67 @@ Returns reference to hash.  Current Port Speed.
 
 =back
 
-=head2 Topology information
+=head2 Power Over Ethernet Port Table
 
-Based upon the software version devices may support Foundry Discovery
-Protocol (FDP) and Link Layer Discovery Protocol (LLDP). These
-methods will query both and return the combination of all information. As a
-result, there may be identical topology information returned from the two
-protocols causing duplicate entries.  It is the calling program's
-responsibility to identify any duplicate entries and remove duplicates if
-necessary.
+These methods emulate the F<POWER-ETHERNET-MIB> Power Source Entity (PSE)
+Port Table C<pethPsePortTable> methods using the F<FOUNDRY-POE-MIB> Power
+over Ethernet Port Table C<snAgentPoePortTable>.
 
 =over
 
-=item $foundry->hasCDP()
+=item $foundry->peth_port_ifindex()
 
-Returns true if the device is running either FDP or LLDP.
+Creates an index of module.port to align with the indexing of the
+C<pethPsePortTable> with a value of C<ifIndex>.  The module defaults 1
+if otherwise unknown.
 
-=item $foundry->c_if()
+=item $foundry->peth_port_admin()
 
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
+Administrative status: is this port permitted to deliver power?
 
-=item $foundry->c_ip()
+C<pethPsePortAdminEnable>
 
-Returns reference to hash.  Key: iid Value: remote IPv4 address
+=item $foundry->peth_port_status()
 
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
+Current status: is this port delivering power.
 
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-FDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
+=item $foundry->peth_port_class()
 
-Use the data from the Layer2 Topology Table below to dig deeper.
+Device class: if status is delivering power, this represents the 802.3af
+class of the device being powered.
 
-=item $foundry->c_port()
+=item $foundry->peth_port_neg_power()
 
-Returns reference to hash. Key: iid Value: remote port (interfaces)
+The power, in milliwatts, that has been committed to this port.
+This value is derived from the 802.3af class of the device being
+powered.
 
-=item $foundry->c_id()
+=item $foundry->peth_port_power()
 
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
+The power, in milliwatts, that the port is delivering.
 
-=item $foundry->c_platform()
+=back
 
-Returns reference to hash.  Key: iid Value: Remote Device Type
+=head2 Power Over Ethernet Module Table
+
+These methods emulate the F<POWER-ETHERNET-MIB> Main Power Source Entity
+(PSE) Table C<pethMainPseTable> methods using the F<FOUNDRY-POE-MIB> Power
+over Ethernet Port Table C<snAgentPoeModuleTable >.
+
+=over
+
+=item $foundry->peth_power_watts()
+
+The power supply's capacity, in watts.
+
+=item $foundry->peth_power_status()
+
+The power supply's operational status.
+
+=item $foundry->peth_power_consumption()
+
+How much power, in watts, this power supply has been committed to
+deliver.
 
 =back
 

Info/Layer3/H3C.pm

@@ -0,0 +1,256 @@
+# SNMP::Info::Layer3::H3C
+#
+# Copyright (c) 2012 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::H3C;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::H3C::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::H3C::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'HH3C-LswDEVM-MIB'     => 'hh3cDevMFanStatus',
+    'HH3C-LswINF-MIB'      => 'hh3cSlotPortMax',
+    'HH3C-LSW-DEV-ADM-MIB' => 'hh3cLswSysVersion',
+    'HH3C-PRODUCT-ID-MIB'  => 'hh3c-s5500-28C-EI',
+    'HH3C-ENTITY-VENDORTYPE-OID-MIB' => 'hh3cevtOther',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'fan' => 'hh3cDevMFanStatus.1',
+    'ps1_status' => 'hh3cDevMPowerStatus.1',
+    'ps2_status' => 'hh3cDevMPowerStatus.2',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    i_duplex_admin => 'hh3cifEthernetDuplex',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    my $h3c = shift;
+    my $mfg = $h3c->entPhysicalMfgName(1) || {};
+    return $mfg->{1};
+}
+
+sub os {
+    my $h3c = shift;
+    my $descr   = $h3c->description();
+
+    return $1 if ( $descr =~ /(\S+)\s+Platform Software/ );
+    return;
+}
+
+sub os_ver {
+    my $h3c = shift;
+    my $descr   = $h3c->description();
+#    my $version = $h3c->hh3cLswSysVersion(); # Don't use, indicates base version only, no release details
+    my $ver_release = $h3c->entPhysicalSoftwareRev(2) || {};
+    my $os_ver  = undef;
+
+    $os_ver = "$1 $2" if ( $descr =~ /Software Version ([^,]+),.*(Release\s\S+)/i );
+
+    return $ver_release->{2} || $os_ver;
+}
+
+sub i_ignore {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+
+        # lo0 etc
+        if ( $interfaces->{$if} =~ /\blo\d*\b/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+# Use Q-BRIDGE-MIB
+
+sub fw_mac {
+    my $l3  = shift;
+    my $partial = shift;
+
+    return $l3->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $l3  = shift;
+    my $partial = shift;
+
+    return $l3->qb_fw_port($partial);
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::H3C - SNMP Interface to L3 Devices, H3C & HP A-series
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $h3c = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $h3c->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for H3C & HP A-series devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<HH3C-LswDEVM-MIB>
+
+=item F<HH3C-LswINF-MIB>
+
+=item F<HH3C-LSW-DEV-ADM-MIB>
+
+=item F<HH3C-PRODUCT-ID-MIB>
+
+=item F<HH3C-ENTITY-VENDORTYPE-OID-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $h3c->vendor()
+
+Returns value for C<entPhysicalMfgName.1>.
+
+=item $h3c->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $h3c->os_ver()
+
+Returns the software version. Either C<entPhysicalSoftwareRev.2> or extracted from 
+C<sysDescr>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $h3c->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback
+
+=item $h3c->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $h3c->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=cut

Info/Layer3/HP9300.pm

@@ -42,7 +42,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -196,134 +196,6 @@ sub interfaces {
     return $i_descr;
 }
 
-#  Use FDP and/or LLDP
-
-sub hasCDP {
-    my $hp9300 = shift;
-
-    return $hp9300->hasLLDP() || $hp9300->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $cdp  = $hp9300->SUPER::c_ip($partial) || {};
-    my $lldp = $hp9300->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_if($partial)     || {};
-    my $cdp  = $hp9300->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_port($partial)     || {};
-    my $cdp  = $hp9300->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_id($partial)     || {};
-    my $cdp  = $hp9300->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $hp9300->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
 1;
 __END__
 
@@ -527,54 +399,6 @@ Returns reference to hash.  Current Port Speed.
 
 =back
 
-=head2 Topology information
-
-Based upon the software version devices may support Foundry Discovery
-Protocol (FDP) and Link Layer Discovery Protocol (LLDP). These
-methods will query both and return the combination of all information. As a
-result, there may be identical topology information returned from the two
-protocols causing duplicate entries.  It is the calling program's
-responsibility to identify any duplicate entries and remove duplicates
-if necessary.
-
-=over
-
-=item $hp9300->hasCDP()
-
-Returns true if the device is running either FDP or LLDP.
-
-=item $hp9300->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $hp9300->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-FDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $hp9300->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $hp9300->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $hp9300->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/Juniper.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -53,8 +53,9 @@ $VERSION = '2.08';
 
 %GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, 
 	     %SNMP::Info::LLDP::GLOBALS,
-	     'serial' => 'jnxBoxSerialNo.0',
-	     'mac'    => 'dot1dBaseBridgeAddress',
+	     'serial'    => 'jnxBoxSerialNo.0',
+	     'mac'       => 'dot1dBaseBridgeAddress',
+	     'box_descr' => 'jnxBoxDescr'
 	     );
 
 %FUNCS = ( %SNMP::Info::Layer3::FUNCS, 
@@ -248,49 +249,6 @@ sub fw_port {
     return $juniper->qb_fw_port($partial);
 }
 
-# Use LLDP
-
-sub hasCDP {
-    my $juniper = shift;
-
-    return $juniper->hasLLDP();
-}
-
-sub c_ip {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_ip($partial);
-}
-
-sub c_if {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_if($partial);
-}
-
-sub c_port {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_port($partial);
-}
-
-sub c_id {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_id($partial);
-}
-
-sub c_platform {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_rem_sysdesc($partial);
-}
-
 # Pseudo ENTITY-MIB methods
 
 # This class supports both virtual chassis (stackable) and physical chassis
@@ -406,7 +364,7 @@ sub e_descr {
     my $juniper = shift;
 
     my $e_index    = $juniper->e_index() || {};
-    my $box_descr  = $juniper->jnxBoxDescr || 0;
+    my $box_descr  = $juniper->box_descr;
     my $contents   = $juniper->jnxContentsDescr() || {};
     my $containers = $juniper->jnxContainersDescr() || {};
 
@@ -617,7 +575,7 @@ Subclass for Juniper Devices running JUNOS
 
 =over
 
-=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC or later.
+=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" or later.
 
 =item F<JUNIPER-CHASSIS-DEFINES-MIB>
 
@@ -663,16 +621,18 @@ Returns serial number
 
 (C<jnxBoxSerialNo.0>)
 
-=item $juniper->serial()
+=item $juniper->mac()
 
 Returns the MAC address used by this bridge when it must be referred
 to in a unique fashion.
 
 (C<dot1dBaseBridgeAddress>)
 
-=item $juniper->hasCDP()
+=item $juniper->box_descr()
 
-Returns whether LLDP is enabled.
+The name, model, or detailed description of the device.
+
+(C<jnxBoxDescr.0>)
 
 =back
 
@@ -718,35 +678,6 @@ IDs.  These are the VLANs which are members of the egress list for the port.
 
 =back
 
-=head2 Topology information
-
-These methods return Link Layer Discovery Protocol (LLDP) information.  See
-documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
-=over
-
-=item $juniper->c_id()
-
-Returns C<lldp_id>
-
-=item $juniper->c_if()
-
-Returns C<lldp_if>
-
-=item $juniper->c_ip()
-
-Returns C<lldp_ip>
-
-=item $juniper->c_platform()
-
-Returns C<lldp_rem_sysdesc>
-
-=item $juniper->c_port()
-
-Returns C<lldp_port>
-
-=back
-
 =head2 Forwarding Table (C<dot1dTpFdbEntry>)
 
 =over 

Info/Layer3/Lantronix.pm

@@ -0,0 +1,271 @@
+# SNMP::Info::Layer3::Lantronix
+# $Id$
+#
+# Copyright (c) 2012 J R Binks
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Lantronix;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Lantronix::ISA = qw/
+    SNMP::Info::Layer3
+    Exporter
+    /;
+@SNMP::Info::Layer3::Lantronix::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'LANTRONIX-MIB'     => 'products',
+    'LANTRONIX-SLC-MIB' => 'slcNetwork',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'slc_os_ver'       => 'slcSystemFWRev',
+    'slc_serial'       => 'slcSystemSerialNo',
+    'slc_model'        => 'slcSystemModel',
+    'slc_psu_a_status' => 'slcDevPowerSupplyA',
+    'slc_psu_b_status' => 'slcDevPowerSupplyB',
+);
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+# General notes:
+#
+# Products like the EDS have very minimal MIB support for the basics.
+# Much information has to be derived from sysDescr string.
+#
+sub vendor {
+    return 'lantronix';
+}
+
+sub os {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $os;
+
+    # On EDS, it is called the "Evolution OS"
+    # Not sure what, if any, name it has a name on other products
+    $os = 'EvolutionOS' if ( $descr =~ m/Lantronix EDS\w+ V([\d\.R]+)/ );
+
+    return 'LantronixOS';
+}
+
+sub os_ver {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_os_ver = $device->slc_os_ver;
+    my $os_ver;
+
+    return $slc_os_ver if defined $slc_os_ver;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $os_ver = $1 if ( $descr =~ m/Lantronix EDS\w+ V([\d\.R]+)/ );
+
+    return $os_ver;
+}
+
+sub serial {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_serial = $device->slc_serial;
+    my $serial;
+
+    return $slc_serial if defined $slc_serial;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $serial = $1 if ( $descr =~ m/Lantronix EDS\w+ V[\d\.R]+ \((\w+)\)/ );
+
+    return $serial;
+}       
+
+sub model {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_model = $device->slc_model;
+    my $model;
+
+    return $slc_model if defined $slc_model;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $model = $1 if ( $descr =~ m/Lantronix (EDS\w+)/ );
+
+    return $model;
+}
+
+sub ps1_status {
+    my $device = shift;
+    my $slc_psu_a_status = $device->slc_psu_a_status;
+
+    return $slc_psu_a_status if defined $slc_psu_a_status;
+
+    return;
+}
+
+sub ps2_status {
+    my $device = shift;
+    my $slc_psu_b_status = $device->slc_psu_b_status;
+
+    return $slc_psu_b_status if defined $slc_psu_b_status;
+
+    return;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Lantronix - SNMP Interface to Lantronix devices such as terminal servers
+
+=head1 AUTHOR
+
+J R Binks
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $device = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'mydevice',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $device->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Lantronix devices such as terminal servers.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<LANTRONIX-MIB>
+
+=item F<LANTRONIX-SLC-MIB>
+
+=back
+
+=head2 Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP.
+
+=over
+
+=item $device->vendor()
+
+Returns 'lantronix'.
+
+=item $device->os()
+
+Returns 'EvolutionOS' for EDS devices.
+
+=item $device->os_ver()
+
+Returns the software version.
+
+=item $device->model()
+
+Returns the model.
+
+=item $device->serial()
+
+Returns the serial number.
+
+=item $device->ps1_status()
+
+Power supply 1 status
+
+=item $device->ps2_status()
+
+Power supply 2 status
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $device->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+=back
+
+=head2 Lantronix specific items
+
+None at present.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Microsoft.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, );
 

Info/Layer3/Mikrotik.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -134,11 +134,11 @@ These are methods that return scalar value from SNMP
 
 =item $mikrotik->vendor()
 
-Returns 'mikrotik'.
+Returns C<'mikrotik'>.
 
 =item $mikrotik->os()
 
-Returns 'routeros'.
+Returns C<'routeros'>.
 
 =item $mikrotik->model()
 

Info/Layer3/N1600.pm

@@ -41,7 +41,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -93,7 +93,7 @@ sub model {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub os {
@@ -174,7 +174,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::N1600 - SNMP Interface to Nortel 16XX Network Devices
+SNMP::Info::Layer3::N1600 - SNMP Interface to Avaya/Nortel 16XX Network
+Devices
 
 =head1 AUTHOR
 
@@ -198,8 +199,8 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Nortel 
-N16XX device through SNMP. 
+Provides abstraction to the configuration information obtainable from an
+Avaya/Nortel N16XX device through SNMP. 
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -247,7 +248,7 @@ F<RAPID-CITY-MIB> and then parses out C<rcA>.
 
 =item $n1600->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $n1600->os()
 

Info/Layer3/NetSNMP.pm

@@ -33,16 +33,18 @@ package SNMP::Info::Layer3::NetSNMP;
 use strict;
 use Exporter;
 use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer3::NetSNMP::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::NetSNMP::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer3::NetSNMP::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     'UCD-SNMP-MIB'       => 'versionTag',
     'NET-SNMP-TC'        => 'netSnmpAgentOIDs',
     'HOST-RESOURCES-MIB' => 'hrSystem',
@@ -50,13 +52,20 @@ $VERSION = '2.08';
 
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
     'netsnmp_vers'   => 'versionTag',
     'hrSystemUptime' => 'hrSystemUptime',
 );
 
-%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
 
-%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
 
 sub vendor {
     return 'Net-SNMP';
@@ -173,6 +182,8 @@ Subclass for Generic Net-SNMP devices
 
 See L<SNMP::Info::Layer3> for its own MIB requirements.
 
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
 =back
 
 =head1 GLOBALS
@@ -210,6 +221,10 @@ Returns ''.
 
 See documentation in L<SNMP::Info::Layer3> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
 =head1 TABLE ENTRIES
 
 These are methods that return tables of information in the form of a reference
@@ -231,6 +246,10 @@ Ignores loopback
 
 See documentation in L<SNMP::Info::Layer3> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
 =head1 NOTES
 
 In order to cause SNMP::Info to classify your device into this class, it

Info/Layer3/Netscreen.pm

@@ -1,7 +1,6 @@
 # SNMP::Info::Layer3::Netscreen
-# $Id$
 #
-# Copyright (c) 2008 Eric Miller
+# Copyright (c) 2012 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -33,34 +32,62 @@ package SNMP::Info::Layer3::Netscreen;
 use strict;
 use Exporter;
 use SNMP::Info::Layer3;
+use SNMP::Info::IEEE802dot11;
 
-@SNMP::Info::Layer3::Netscreen::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Netscreen::ISA
+    = qw/SNMP::Info::Layer3 SNMP::Info::IEEE802dot11 Exporter/;
 @SNMP::Info::Layer3::Netscreen::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::IEEE802dot11::MIBS,
     'NETSCREEN-SMI'           => 'netscreenSetting',
     'NETSCREEN-PRODUCTS-MIB'  => 'netscreenGeneric',
     'NETSCREEN-INTERFACE-MIB' => 'nsIfIndex',
     'NETSCREEN-SET-GEN-MIB'   => 'nsSetGenSwVer',
+    'NETSCREEN-IP-ARP-MIB'    => 'nsIpArpAOD',
 );
 
-%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, 'os_version' => 'nsSetGenSwVer', );
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::IEEE802dot11::GLOBALS,
+    'os_version' => 'nsSetGenSwVer',
+);
 
-%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
 
-%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+    ns_i_index       => 'nsIfIndex',
+    ns_i_name        => 'nsIfName',
+    ns_i_description => 'nsIfDescr',
+    ns_i_mac         => 'nsIfMAC',
+    ns_i_up          => 'nsIfStatus',
+    ns_ip_table      => 'nsIfIp',
+    ns_ip_netmask    => 'nsIfNetmask',
+    at_index         => 'nsIpArpIfIdx',
+    at_paddr         => 'nsIpArpMac',
+    at_netaddr       => 'nsIpArpIp',
+    bp_index         => 'nsIfInfo',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::IEEE802dot11::MUNGE,
+    'ns_i_mac' => \&SNMP::Info::munge_mac,
+    'at_paddr' => \&SNMP::Info::munge_mac,
+);
 
 sub layers {
-    return '01001100';
+    return '01001110';
 }
 
 sub vendor {
-    return 'netscreen';
+    return 'juniper';
 }
 
 sub os {
@@ -92,6 +119,348 @@ sub serial {
     return;
 }
 
+sub model {
+    my $netscreen = shift;
+
+    my $id = $netscreen->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::model() - Device does not support sysObjectID\n"
+            if $netscreen->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^netscreen//i;
+    return $model;
+}
+
+# provides mapping from IF-MIB to nsIf interfaces - many to 1 (!)
+# - on WLAN devices wireless0/0(|-[ag]) -> wireless0/0 !!
+sub _if_nsif_map {
+    my $netscreen   = shift;
+    my $i_descr     = $netscreen->SUPER::i_description;
+    my $ns_descr    = $netscreen->i_description;
+    my %if_nsif_map = ();
+    my @ikeys       = sort { $a <=> $b } keys %$i_descr;
+    my @nskeys      = sort { $a <=> $b } keys %$ns_descr;
+    my $i           = 0;
+    my $n           = 0;
+
+    # assumes descriptions are in the same order from both walks
+    while ( $i < @ikeys && $n < @nskeys ) {
+
+        # find matching sub interfaces
+        while (
+            $i < @ikeys
+            && substr(
+                $i_descr->{ $ikeys[$i] },
+                0,
+                length $ns_descr->{ $nskeys[$n] }
+            ) eq $ns_descr->{ $nskeys[$n] }
+            )
+        {
+
+            $if_nsif_map{ $ikeys[$i] } = $nskeys[$n];
+            $i++;
+        }
+
+        $n++;
+
+        # skip non-matching interfaces (e.g. tunnel.N)
+        while (
+            $i < @ikeys
+            && substr(
+                $i_descr->{ $ikeys[$i] },
+                0,
+                length $ns_descr->{ $nskeys[$n] }
+            ) ne $ns_descr->{ $nskeys[$n] }
+            && $n < @nskeys
+            )
+        {
+
+            $if_nsif_map{ $ikeys[$i] } = 0;    # no matching interface
+            $i++;
+        }
+    }
+
+    return \%if_nsif_map;
+}
+
+# Provides mapping from nsIf interfaces to IF-MIB interfaces - many to 1
+# Example, tunnel.# interfaces are not present in IF-MIB.  There exist no
+# mapping of index IID's between the tables so create mapping based on names
+sub _nsif_if_map {
+    my $netscreen = shift;
+
+    my $i_descr      = $netscreen->SUPER::i_description;
+    my $ns_descr     = $netscreen->i_description;
+    my %rev_i_descr  = reverse %$i_descr;
+    my %rev_ns_descr = reverse %$ns_descr;
+
+    my %nsif_if_map = ();
+    foreach my $value ( values %$ns_descr ) {
+        if ( exists $rev_i_descr{$value} ) {
+            $nsif_if_map{ $rev_ns_descr{$value} } = $rev_i_descr{$value};
+        }
+        else {
+            $nsif_if_map{ $rev_ns_descr{$value} } = 0;
+        }
+    }
+    return \%nsif_if_map;
+}
+
+sub interfaces {
+    my $netscreen = shift;
+    return $netscreen->i_description();
+}
+
+sub i_index {
+    my $netscreen = shift;
+    return $netscreen->ns_i_index();
+}
+
+sub i_name {
+    my $netscreen = shift;
+    return $netscreen->ns_i_name();
+}
+
+sub i_description {
+    my $netscreen = shift;
+
+    # Versions prior to 5.4 do not support nsIfDescr but do have nsIfName
+    return $netscreen->ns_i_description() || $netscreen->ns_i_name();
+}
+
+sub i_mac {
+    my $netscreen = shift;
+
+    my $ns_mac   = $netscreen->ns_i_mac()     || {};
+    my $if_i_mac = $netscreen->SUPER::i_mac() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+
+    my %i_mac = ();
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_mac{$iid} = $ns_mac->{$iid} || $if_i_mac->{ $ns_i_map->{$iid} };
+    }
+
+    return \%i_mac;
+}
+
+sub i_lastchange {
+    my $netscreen = shift;
+
+    my $if_i_lastchange = $netscreen->SUPER::i_lastchange() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_lastchange;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_lastchange{$iid} = $if_i_lastchange->{ $ns_i_map->{$iid} };
+    }
+    return \%i_lastchange;
+}
+
+sub i_up {
+    my $netscreen = shift;
+    return $netscreen->ns_i_up();
+}
+
+sub i_up_admin {
+    my $netscreen  = shift;
+    my $i_up       = $netscreen->i_up();
+    my $i_up_admin = $netscreen->SUPER::i_up_admin();
+    my $ns_i_map   = $netscreen->_nsif_if_map();
+    my %i_up_admin;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_up_admin{$iid} 
+            = $i_up->{$iid} eq "up" && "up"
+            || $i_up_admin->{ $ns_i_map->{$iid} }
+            || 0;
+    }
+    return \%i_up_admin;
+}
+
+sub i_type {
+    my $netscreen = shift;
+
+    my $if_i_type = $netscreen->SUPER::i_type() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_type;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_type{$iid} = $if_i_type->{ $ns_i_map->{$iid} } || "tunnel";
+    }
+    return \%i_type;
+}
+
+sub i_mtu {
+    my $netscreen = shift;
+
+    my $i_type = $netscreen->SUPER::i_mtu() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_mtu;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_mtu{$iid} = $i_type->{ $ns_i_map->{$iid} };
+    }
+    return \%i_mtu;
+}
+
+sub i_ignore {
+    return;
+}
+
+sub i_speed {
+    my $netscreen = shift;
+
+    my $i_speed  = $netscreen->SUPER::i_speed();
+    my $i_name   = $netscreen->i_name();
+    my $ns_i_map = $netscreen->_nsif_if_map;
+    my %i_speed;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_speed{$iid} 
+            = $i_speed->{ $ns_i_map->{$iid} }
+            || $i_name->{$iid} =~ /tunnel/ && "vpn"
+            || 0;
+    }
+    return \%i_speed;
+}
+
+sub _mac_map {
+    my $netscreen = shift;
+
+    my $arp_mac = $netscreen->nsIpArpMac() || {};
+
+    my %mac_map = ();
+    foreach my $iid ( keys %$arp_mac ) {
+        my $oid = join( ".", ( unpack( "C6", $arp_mac->{$iid} ) ) );
+        $mac_map{$oid} = $iid;
+    }
+    return \%mac_map;
+}
+
+sub ip_index {
+    my $netscreen = shift;
+
+    my $ns_ip = $netscreen->ns_ip_table() || {};
+
+    my %ip_index = ();
+    foreach my $iid ( keys %$ns_ip ) {
+        $ip_index{ $ns_ip->{$iid} } = $iid if $ns_ip->{$iid} ne "0.0.0.0";
+    }
+    return \%ip_index;
+}
+
+sub ip_table {
+    my $netscreen = shift;
+
+    my $ip_index = $netscreen->ip_index() || {};
+
+    my %ip_table = ();
+    foreach my $iid ( keys %$ip_index ) {
+        $ip_table{$iid} = $iid;
+    }
+    return \%ip_table;
+}
+
+sub ip_netmask {
+    my $netscreen = shift;
+
+    my $ip_index = $netscreen->ip_index() || {};
+    my $ns_netmask = $netscreen->ns_ip_netmask();
+
+    my %ip_netmask = ();
+    foreach my $iid ( keys %$ip_index ) {
+        $ip_netmask{$iid} = $ns_netmask->{ $ip_index->{$iid} };
+    }
+    return \%ip_netmask;
+}
+
+sub fw_index {
+    my $netscreen = shift;
+    my %fw_index  = ();
+    my $arp_mac   = $netscreen->nsIpArpMac() || {};
+
+    foreach my $iid ( keys %$arp_mac ) {
+        my $oid = join( ".", ( unpack( "C6", $arp_mac->{$iid} ) ) );
+        $fw_index{$iid} = $oid;
+    }
+    return \%fw_index;
+}
+
+sub fw_mac {
+    my $netscreen = shift;
+
+    my $mac_map = $netscreen->_mac_map() || {};
+
+    my %fw_mac = ();
+    foreach my $oid ( keys %$mac_map ) {
+        my $mac
+            = join( ":", ( map { sprintf "%lx", $_ } split( /\./, $oid ) ) );
+        $fw_mac{$oid} = $mac;
+    }
+    return \%fw_mac;
+}
+
+sub bp_index {
+    my $netscreen = shift;
+
+    my $if_info = $netscreen->nsIfInfo() || {};
+
+    my %bp_index = ();
+    foreach my $iid ( keys %$if_info ) {
+        $bp_index{ $if_info->{$iid} } = $iid;
+    }
+    return \%bp_index;
+}
+
+sub fw_port {
+    my $netscreen = shift;
+
+    my $fw_index = $netscreen->fw_index();
+    my $arp_if = $netscreen->nsIpArpIfIdx() || {};
+
+    my %fw_port;
+    foreach my $iid ( keys %$arp_if ) {
+        $fw_port{ $fw_index->{$iid} } = $arp_if->{$iid}
+            if defined $fw_index->{$iid};
+    }
+    return \%fw_port;
+}
+
+# need to remap from IF-MIB index to nsIf index
+sub i_ssidlist {
+    my $netscreen = shift;
+
+    my $i_ssidlist = $netscreen->SUPER::i_ssidlist() || {};
+    my $ns_i_map = $netscreen->_if_nsif_map();
+
+    my %i_ssidlist;
+    foreach my $iid ( keys %$i_ssidlist ) {
+        $i_ssidlist{ $ns_i_map->{$iid} } = $i_ssidlist->{$iid};
+    }
+    return \%i_ssidlist;
+}
+
+sub i_80211channel {
+    my $netscreen = shift;
+
+    my $i_80211channel = $netscreen->SUPER::i_80211channel() || {};
+    my $ns_i_map = $netscreen->_if_nsif_map();
+
+    my %i_80211channel;
+    foreach my $iid ( keys %$i_80211channel ) {
+        $i_80211channel{ $ns_i_map->{$iid} } = $i_80211channel->{$iid};
+    }
+    return \%i_80211channel;
+}
+
 1;
 
 __END__
@@ -124,8 +493,10 @@ Kent Hamilton
 =head1 DESCRIPTION
 
 Provides abstraction to the configuration information obtainable from a 
-Netscreen device through SNMP. See inherited classes' documentation for 
-inherited methods.
+Juniper Netscreen devices through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
 my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
 
@@ -135,6 +506,8 @@ my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
 
 =item SNMP::Info::Layer3
 
+=item SNMP::Info::IEEE802dot11
+
 =back
 
 =head2 Required MIBs
@@ -149,9 +522,13 @@ my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
 
 =item F<NETSCREEN-SET-GEN-MIB>
 
-=item Inherited Classes
+=item F<NETSCREEN-IP-ARP-MIB>
 
-See L<SNMP::Info::Layer3/"Required MIBs"> and its inherited classes.
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
 
 =back
 
@@ -161,9 +538,13 @@ These are methods that return scalar value from SNMP
 
 =over
 
+=item $netscreen->model()
+
+Tries to reference $netscreen->id() to F<NETSCREEN-PRODUCTS-MIB>
+
 =item $netscreen->vendor()
 
-Returns 'netscreen'
+Returns C<'juniper'>
 
 =item $netscreen->os()
 
@@ -175,7 +556,7 @@ Extracts the OS version from the description string.
 
 =item $netscreen->serial()
 
-Returns serial number..
+Returns serial number.
 
 =back
 
@@ -185,8 +566,8 @@ Returns serial number..
 
 =item $netscreen->layers()
 
-Returns 01001100.  Device doesn't report layers properly, modified to reflect 
-Layer3 functionality.
+Returns 01001110.  Device doesn't report layers properly, modified to reflect 
+Layer 2 and 3 functionality.
 
 =back
 
@@ -194,14 +575,166 @@ Layer3 functionality.
 
 See L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
+=head2 Overrides
+
+=head3 Interface Information
+
+=over
+
+=item $netscreen->interfaces()
+
+Creates a map between the interface identifier (iid) and the physical port
+name.
+
+Defaults to C<insIfDescr> if available, uses C<nsIfName> if not.
+
+=item $netscreen->i_description() 
+
+Description of the interface. Uses C<insIfDescr> if available, C<nsIfName>
+if not.
+
+=item $netscreen->i_ignore()
+
+Returns without defining any interfaces to ignore.
+
+=item $netscreen->i_index()
+
+Default SNMP IID to Interface index.
+
+(C<nsIfIndex>)
+
+=item $netscreen->i_lastchange()
+
+The value of C<sysUpTime> when this port last changed states (up,down), 
+maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifLastChange>)
+
+=item $netscreen->i_mac() 
+
+MAC address of the interface.  Note this is just the MAC of the port, not
+anything connected to it.  Uses C<nsIfMAC> if available, C<ifPhysAddress>
+if not.
+
+=item $netscreen->i_mtu()
+
+INTEGER. Interface MTU value, maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifMtu>)
+
+=item $netscreen->i_name()
+
+Interface Name field.
+
+(C<nsIfName>)
+
+=item $netscreen->i_speed()
+
+Speed of the link, maps from C<ifIndex> to C<nsIfIndex>.
+
+=item $netscreen->i_type()
+
+Interface type.  Maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifType>)
+
+=item $netscreen->i_up() 
+
+Link Status of the interface.  Typical values are 'up' and 'down'.
+
+(C<nsIfStatus>)
+
+=item $netscreen->i_up_admin()
+
+Administrative status of the port.  Checks both C<ifAdminStatus> and
+C<nsIfStatus>.
+
+=back
+
+=head3 IP Address Table
+
+Each entry in this table is an IP address in use on this device.
+
+=over
+
+=item $netscreen->ip_index()
+
+Maps the IP Table to the IID
+
+=item $netscreen->ip_table()
+
+Maps the Table to the IP address
+
+(C<nsIfIp>)
+
+=item $netscreen->ip_netmask()
+
+Gives netmask setting for IP table entry.
+
+(C<nsIfNetmask>)
+
+=back
+
+=head3 Forwarding Table
+
+Uses C<nsIpArpTable> to emulate the forwarding table.
+
+=over 
+
+=item $netscreen->fw_index()
+
+Maps the Forwarding Table to the IID
+
+=item $netscreen->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses.
+
+=item $netscreen->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (IID).
+
+=item $netscreen->bp_index()
+
+Returns reference to hash of bridge port table entries map back to interface
+identifier (IID).
+
+=back
+
+=head3 Wireless Information
+
+=over 
+
+=item $dot11->i_ssidlist()
+
+Returns reference to hash.  SSID's recognized by the radio interface.
+Remaps from C<ifIndex> to C<nsIfIndex>.
+
+(C<dot11DesiredSSID>)
+
+=item $dot11->i_80211channel()
+
+Returns reference to hash.  Current operating frequency channel of the radio
+interface.  Remaps from C<ifIndex> to C<nsIfIndex>.
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
+
 =cut
 

Info/Layer3/Nexus.pm

@@ -0,0 +1,494 @@
+# SNMP::Info::Layer3::Nexus
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Nexus;
+
+use strict;
+use Exporter;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoVTP;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+# NOTE : Top-most items gets precedence for @ISA
+@SNMP::Info::Layer3::Nexus::ISA = qw/
+    SNMP::Info::CiscoVTP 
+    SNMP::Info::CiscoStpExtensions
+    SNMP::Info::LLDP
+    SNMP::Info::CDP 
+    SNMP::Info::CiscoImage
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower
+    SNMP::Info::Layer3
+    Exporter
+/;
+
+@SNMP::Info::Layer3::Nexus::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+# NOTE: Order creates precedence
+#       Example: v_name exists in Bridge.pm and CiscoVTP.pm
+#       Bridge is called from Layer3 and CiscoStpExtensions
+#       So we want CiscoVTP to come last to get the right one.
+# The @ISA order should be reverse of these orders.
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoPower::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS, 
+    %SNMP::Info::CiscoVTP::MIBS,
+    'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoImage::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    'mac' => 'dot1dBaseBridgeAddress',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoPower::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS, 
+    %SNMP::Info::CiscoVTP::FUNCS,    
+);
+
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoPower::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE,         
+    %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE, 
+    %SNMP::Info::CiscoVTP::MUNGE,    
+);
+
+sub cisco_comm_indexing { return 1; }
+
+sub vendor {
+    return 'cisco';
+}
+
+sub os {
+    return 'nx-os';
+}
+
+sub os_ver {
+    my $nexus = shift; 
+    my $descr = $nexus->description();
+    
+    return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
+    return $descr;
+}
+
+sub serial {
+    my $nexus = shift;
+
+    my $e_parent = $nexus->e_parent();
+
+    foreach my $iid ( keys %$e_parent ) {
+	my $parent = $e_parent->{$iid};
+        if ($parent eq '0') {
+	    my $serial = $nexus->e_serial($iid);
+	    return $serial->{$iid};
+	}
+    }    
+    return;
+}
+
+# sysObjectID returns an IID to an entry in the CISCO-ENTITY-VENDORTYPE-OID-MIB.
+# Look it up and return it.
+sub model {
+    my $nexus = shift;
+    my $id    = $nexus->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
+            if $nexus->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^cevChassis//i;
+    return $model;
+}
+
+# Reported version 6.x of NX-OS doesn't use the IPv4 address as index
+# override methods in ipAddrTable
+sub ip_table {
+    my $nexus         = shift;
+    my $orig_ip_table = $nexus->orig_ip_table();
+
+    my %ip_table;
+    foreach my $iid ( keys %$orig_ip_table ) {
+	my $ip = $orig_ip_table->{$iid};
+	next unless defined $ip;
+
+	$ip_table{$ip} = $ip;
+    }
+    return \%ip_table;
+}
+
+sub ip_index {
+    my $nexus         = shift;
+    my $orig_ip_table = $nexus->orig_ip_table();
+    my $orig_ip_index = $nexus->orig_ip_index();
+
+    my %ip_index;
+    foreach my $iid ( keys %$orig_ip_table ) {
+	my $ip    = $orig_ip_table->{$iid};
+	my $index = $orig_ip_index->{$iid};
+
+	next unless ( defined $ip && defined $index );
+
+	$ip_index{$ip} = $index;
+    }
+    return \%ip_index;
+}
+
+sub ip_netmask {
+    my $nexus           = shift;
+    my $orig_ip_table   = $nexus->orig_ip_table();
+    my $orig_ip_netmask = $nexus->orig_ip_netmask();
+
+    my %ip_netmask;
+    foreach my $iid ( keys %$orig_ip_table ) {
+	my $ip      = $orig_ip_table->{$iid};
+	my $netmask = $orig_ip_netmask->{$iid};
+
+	next unless ( defined $ip && defined $netmask );
+
+	$ip_netmask{$ip} = $netmask;
+    }
+    return \%ip_netmask;
+}
+
+sub ip_broadcast {
+    my $nexus             = shift;
+    my $orig_ip_table     = $nexus->orig_ip_table();
+    my $orig_ip_broadcast = $nexus->orig_ip_broadcast();
+
+    my %ip_broadcast;
+    foreach my $iid ( keys %$orig_ip_table ) {
+	my $ip        = $orig_ip_table->{$iid};
+	my $broadcast = $orig_ip_broadcast->{$iid};
+
+	next unless ( defined $ip && defined $broadcast );
+
+	$ip_broadcast{$ip} = $broadcast;
+    }
+    return \%ip_broadcast;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Nexus - SNMP Interface to Cisco Nexus Switches running
+NX-OS
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $nexus = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $nexus->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Cisco Nexus Switches running NX-OS.  
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $nexus = new SNMP::Info::Layer3::Nexus(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoImage
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::CiscoPower
+
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
+
+=back
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return a scalar value from SNMP
+
+=over
+
+=item $nexus->vendor()
+
+Returns 'cisco'
+
+=item $nexus->os()
+
+Returns C<'nx-os'>
+
+=item $nexus->os_ver()
+
+Returns operating system version extracted from C<sysDescr>.
+
+=item $nexus->serial()
+
+Returns the serial number of the chassis from F<ENTITY-MIB>.
+
+=item $nexus->model()
+
+Tries to reference $nexus->id() to F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
+
+Removes C<'cevChassis'> for readability.
+
+=item $nexus->mac()
+
+C<dot1dBaseBridgeAddress>
+
+=item $nexus->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=back
+
+=head2 Overrides
+
+=head3 IP Address Table
+
+Each entry in this table is an IP address in use on this device.  Some 
+versions do not index the table with the IPv4 address in accordance with
+the MIB definition, these overrides correct that behavior.
+
+=over
+
+=item $nexus->ip_index()
+
+Maps the IP Table to the IID
+
+(C<ipAdEntIfIndex>)
+
+=item $nexus->ip_table()
+
+Maps the Table to the IP address
+
+(C<ipAdEntAddr>)
+
+=item $nexus->ip_netmask()
+
+Gives netmask setting for IP table entry.
+
+(C<ipAdEntNetMask>)
+
+=item $nexus->ip_broadcast()
+
+Gives broadcast address for IP table entry.
+
+(C<ipAdEntBcastAddr>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/PacketFront.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -175,7 +175,7 @@ These are methods that return scalar value from SNMP
 
 =item $pfront->vendor()
 
-Returns 'packetfront'.
+Returns C<'packetfront'>.
 
 =item $pfront->os()
 
@@ -187,7 +187,7 @@ Returns the software version extracted from C<sysDescr>.
 
 =item $pfront->serial()
 
-Returns the value of productSerialNo. 
+Returns the value of C<productSerialNo>. 
 
 =back
 

Info/Layer3/Passport.pm

@@ -1,7 +1,6 @@
 # SNMP::Info::Layer3::Passport
-# $Id$
 #
-# Copyright (c) 2008 Eric Miller
+# Copyright (c) 2012 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -30,6 +29,7 @@
 
 package SNMP::Info::Layer3::Passport;
 
+use warnings;
 use strict;
 use Exporter;
 use SNMP::Info::SONMP;
@@ -43,7 +43,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::RapidCity::MIBS,
@@ -80,12 +80,12 @@ sub model {
 
     return $id unless defined $model;
 
-    $model =~ s/^rcA//i;
+    $model =~ s/^rc(A)?//i;
     return $model;
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub os {
@@ -126,9 +126,9 @@ sub i_index {
 
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
+                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
         )
         )
     {
@@ -182,9 +182,9 @@ sub interfaces {
     my $vlan_id = {};
 
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
+                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
         )
         )
     {
@@ -214,7 +214,7 @@ sub interfaces {
             $if{$index} = 'Cpu.6';
         }
 
-        elsif (( $index > 2000 and $model =~ /(86|83|81|16)/ )
+        elsif (( $index > 2000 and $model =~ /(86|83|81|16|VSP)/ )
             or ( $index > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
         {
 
@@ -255,9 +255,9 @@ sub i_mac {
 
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
+                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
         )
         )
     {
@@ -329,9 +329,9 @@ sub i_description {
 
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
+                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
         )
         )
     {
@@ -365,9 +365,9 @@ sub i_name {
     my %reverse_vlan;
 
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
+                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
         )
         )
     {
@@ -402,8 +402,8 @@ sub i_name {
                 and $model =~ /(105|11[05]0|12[05])/ )
             )
         {
-            my $vlan_index = $reverse_vlan{$iid};
-            my $vlan_name  = $v_name->{$vlan_index};
+            my $vlan_idx = $reverse_vlan{$iid};
+            my $vlan_name  = $v_name->{$vlan_idx};
             next unless defined $vlan_name;
 
             $i_name{$iid} = $vlan_name;
@@ -510,7 +510,7 @@ sub root_ip {
     my $sonmp_topo_ip   = $passport->sonmp_topo_ip();
 
     # Only 8600 and 1600 have CLIP or Management Virtual IP
-    if ( defined $model and $model =~ /(86|16)/ ) {
+    if ( defined $model and $model =~ /(86|16|VSP)/ ) {
 
         # Return CLIP (CircuitLess IP)
         foreach my $iid ( keys %$rc_ip_type ) {
@@ -683,7 +683,7 @@ sub e_descr {
 
     my $model = $passport->model();
     my $rc_ps = $passport->rc_ps_detail() || {};
-    my $rc_ch = $passport->rcChasType();
+    my $rc_ch = $passport->chassis() || '';
     $rc_ch =~ s/a//;
 
     my %rc_e_descr;
@@ -752,7 +752,7 @@ sub e_type {
 
     my $model = $passport->model();
     my $rc_ps = $passport->rc_ps_type() || {};
-    my $rc_ch = $passport->rcChasType();
+    my $rc_ch = $passport->chassis();
 
     my %rc_e_type;
 
@@ -927,7 +927,7 @@ sub e_vendor {
 
     my %rc_e_vendor;
     foreach my $iid ( keys %$rc_e_idx ) {
-        $rc_e_vendor{$iid} = 'nortel';
+        $rc_e_vendor{$iid} = 'avaya';
     }
     return \%rc_e_vendor;
 }
@@ -1051,8 +1051,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Passport - SNMP Interface to modular Nortel Ethernet Routing
-Switches (formerly Passport / Accelar)
+SNMP::Info::Layer3::Passport - SNMP Interface to modular Avaya
+Ethernet Routing Switch 8000 Series and VSP 9000 Series switches.
 
 =head1 AUTHOR
 
@@ -1075,10 +1075,10 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for modular Nortel Ethernet Routing Switches (formerly
-Passport and Accelar Series Switches).
+Abstraction subclass for modular Avaya Ethernet Routing Switch 8000 Series
+(formerly Nortel/Bay Passport/Accelar) and VSP 9000 Series switches.
 
-These devices have some of the same characteristics as the stackable Nortel 
+These devices have some of the same characteristics as the stackable Avaya 
 Ethernet Switches (Baystack).  For example, extended interface information is 
 gleaned from F<RAPID-CITY>.
 
@@ -1126,7 +1126,7 @@ F<RAPID-CITY-MIB> and then parses out C<rcA>.
 
 =item $passport->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $passport->os()
 
@@ -1273,7 +1273,7 @@ Returns reference to hash.  Key: IID, Value: Hardware version.
 
 =item $passport->e_vendor()
 
-Returns reference to hash.  Key: IID, Value: nortel.
+Returns reference to hash.  Key: IID, Value: avaya.
 
 =item $passport->e_serial()
 

Info/Layer3/Pf.pm

@@ -41,7 +41,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -118,42 +118,6 @@ sub os_ver {
     return $os_ver;
 }
 
-# Use LLDP
-sub hasCDP {
-    my $pf = shift;
-    return $pf->hasLLDP();
-}
-
-sub c_ip {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_ip($partial);
-}
-
-sub c_if {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_if($partial);
-}
-
-sub c_port {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_port($partial);
-}
-
-sub c_id {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_id($partial);
-}
-
-sub c_platform {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_rem_sysdesc($partial);
-}
-
 1;
 __END__
 
@@ -230,10 +194,6 @@ These are methods that return scalar values from SNMP
 
     Returns 'FreeBSD'
 
-=item $pf->hasCDP()
-
-    Returns whether LLDP is enabled.
-
 =item $pf->model()
 
 Grabs the os version from C<sysDescr>
@@ -259,30 +219,6 @@ See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=over
-
-=item $pf->c_id()
-
-Returns LLDP information.
-
-=item $pf->c_if()
-
-Returns LLDP information.
-
-=item $pf->c_ip()
-
-Returns LLDP information.
-
-=item $pf->c_platform()
-
-Returns LLDP information.
-
-=item $pf->c_port()
-
-Returns LLDP information.
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/Pica8.pm

@@ -0,0 +1,221 @@
+# SNMP::Info::Layer3::Pica8
+#
+# Copyright (c) 2013 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Pica8;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Pica8::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Pica8::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    return 'Pica8';
+}
+
+sub os {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /(\S+)\s+Platform Software/i );
+    return;
+}
+
+sub os_ver {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /Software version ([\d\.]+)/i );
+    return;
+}
+
+sub model {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /Hardware model (P-\d{4})/i );
+    return;
+}
+
+# Use Q-BRIDGE-MIB
+
+sub fw_mac {
+    my $l3  = shift;
+    my $partial = shift;
+
+    return $l3->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $l3  = shift;
+    my $partial = shift;
+
+    return $l3->qb_fw_port($partial);
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Pica8 - SNMP Interface to L3 Devices, Pica8
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $pica8 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $pica8->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Pica8 devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<PICA-PRIVATE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $pica8->vendor()
+
+Returns 'Pica8'
+
+=item $pica8->model()
+
+Returns the model name extracted from C<sysDescr>.
+
+=item $pica8->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $pica8->os_ver()
+
+Returns the OS version extracted from C<sysDescr>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $pica8->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $pica8->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=cut

Info/Layer3/SonicWALL.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,

Info/Layer3/Sun.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, );
 

Info/Layer3/Tasman.pm

@@ -0,0 +1,298 @@
+# SNMP::Info::Layer3::Tasman
+#
+# Copyright (c) 2012 Eric Miller
+# All Rights Reserved
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Tasman;
+
+use strict;
+use Exporter;
+
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+
+@SNMP::Info::Layer3::Tasman::ISA = qw/SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Tasman::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    'NT-ENTERPRISE-DATA-MIB' => 'ntEnterpriseRouters',
+    'SYSTEM-MIB'             => 'nnsysVersion',
+    'CHASSIS-MIB'            => 'nnchassisModel',
+    'ENVIRONMENT-MIB'        => 'nnenvPwrsupStatus',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    'ps1_type'      => 'nnenvPwrsupType.1',
+    'ps1_status'    => 'nnenvPwrsupStatus.1',
+    'ps2_type'      => 'nnenvPwrsupType.2',
+    'ps2_status'    => 'nnenvPwrsupStatus.2',
+    'nn_sys_ver'    => 'nnsysVersion',
+    'nn_ch_model'   => 'nnchassisModel',
+    'nn_ch_op_stat' => 'nnchassisOperStatus',
+    'nn_ch_serial'  => 'nnchassisSerialNumber',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+);
+
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::Tasman::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::Tasman::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub vendor {
+    return 'avaya';
+}
+
+sub os {
+    return 'tasman';
+}
+
+sub os_ver {
+    my $tasman  = shift;
+    my $version = $tasman->nn_sys_ver() || "";
+    my $descr   = $tasman->description()  || "";
+
+    # Newer versions
+    return $1 if ( $version =~ /^SW:\s+(.+?)\s+/ );
+    # Older versions
+    return $1 if ( $descr =~ /Software Version\s+=\s+[r]*(.+),/);
+    # Can't find
+    return;
+}
+
+sub model {
+    my $tasman = shift;
+
+    my $id        = $tasman->id();
+    my $ch_model = $tasman->nn_ch_model();
+    
+    return $ch_model if $ch_model;
+
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    $model =~ s/^ntSecureRouter/SR/;
+    return $model;
+}
+
+sub serial {
+    my $tasman = shift;
+
+    # Newer versions of the software redefined the MIB in a non-backwards
+    # compatible manner.  Try the old OID first.
+    my $serial = $tasman->nn_ch_op_stat();
+    # Newer versions populate status, serial should contain some numbers
+    return $serial if ($serial !~ /^\D+$/);
+
+    # Unfortunately newer versions don't seem to populate the newer OID.
+    return $tasman->nn_ch_serial();
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Tasman - SNMP Interface to Avaya Secure Routers
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $tasman = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $tasman->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Avaya Secure Routers
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::MAU
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<NT-ENTERPRISE-DATA-MIB>
+
+=item F<SYSTEM-MIB>
+
+=item F<CHASSIS-MIB>
+
+=item F<ENVIRONMENT-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $tasman->vendor()
+
+Returns C<'avaya'>
+
+=item $tasman->model()
+
+Tries to get the model from C<nnchassisModel> and if not available 
+cross references $tasman->id() to F<NT-ENTERPRISE-DATA-MIB>.
+
+Substitutes 'SR' for C<'ntSecureRouter'> in the name for readability.
+
+=item $tasman->os()
+
+Returns C<'tasman'>
+
+=item $tasman->os_ver()
+
+Grabs the os version from C<nnsysVersion>
+
+=item $tasman->ps1_type()
+
+(C<nnenvPwrsupType.1>)
+
+=item $tasman->ps1_status()
+
+(C<nnenvPwrsupStatus.1>)
+
+=item $tasman->ps2_type()
+
+(C<nnenvPwrsupType.2>)
+
+=item $tasman->ps2_status()
+ 
+(C<nnenvPwrsupStatus.2>)
+
+=item $tasman->nn_sys_ver()
+
+(C<nnsysVersion.0>)
+
+=item $tasman->nn_ch_model()
+
+(C<nnchassisModel.0>)
+
+=item $tasman->nn_ch_op_stat()
+
+(C<nnchassisOperStatus.0>)
+
+=item $tasman->nn_ch_serial()
+
+(C<nnchassisSerialNumber.0>)
+
+=item $tasman->serial()
+
+Tries both (C<nnchassisOperStatus>) and (C<nnchassisSerialNumber>) as oid
+was redefined between versions.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over 4
+
+=item $stack->i_duplex_admin()
+
+Returns reference to hash of iid to administrative duplex setting.
+
+First checks for fixed gigabit ports which are always full duplex. Next checks
+the port administrative speed (C<portAdminSpeed>) which if set to
+autonegotiate then the duplex will also autonegotiate, otherwise it uses the
+reported port duplex (C<portDuplex>).
+
+=item $stack->i_speed_admin()
+
+Returns reference to hash of iid to administrative speed setting.
+
+C<portAdminSpeed>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Timetra.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, 'TIMETRA-GLOBAL-MIB' => 'timetraReg', );
 

Info/Layer7.pm

@@ -37,9 +37,9 @@ use SNMP::Info;
 @SNMP::Info::Layer7::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::Layer7::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -60,11 +60,15 @@ $VERSION = '2.08';
 
 
 # $l7->model() - Looks at sysObjectID which gives the oid of the system
-#       name, contained in a propriatry MIB.
+#       name, contained in a proprietary  MIB.
 sub model {
     my $l7    = shift;
     my $id    = $l7->id();
     my $model = &SNMP::translateObj($id);
+
+    # Neoteris (Juniper IVE)    
+    $model =~ s/^ive//i;
+
     return $model;
 }
 
@@ -84,15 +88,35 @@ sub interfaces {
     my $l7      = shift;
     my $partial = shift;
 
-    my $interfaces = $l7->i_index($partial)   || {};
-    my $rptr_port  = $l7->rptr_port($partial) || {};
+    my $interfaces = $l7->i_index($partial)       || {};
+    my $i_descr    = $l7->i_description($partial) || {};
 
-    foreach my $port ( keys %$rptr_port ) {
-        $interfaces->{$port} = $port;
+    # Replace the Index with the ifDescr field.
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid};
+        next unless defined $port;
+        $interfaces->{$iid} = $port;
     }
     return $interfaces;
 }
 
+sub i_ignore {
+    my $l7      = shift;
+    my $partial = shift;
+
+    my $i_type = $l7->i_type($partial) || {};
+
+    my %i_ignore = ();
+
+    foreach my $if ( keys %$i_type ) {
+        my $type = $i_type->{$if};
+        $i_ignore{$if}++
+            if $type =~ /(loopback|other|cpu)/i;
+    }
+
+    return \%i_ignore;
+}
+
 1;
 __END__
 
@@ -186,7 +210,6 @@ Cross references $l7->id() with product IDs.
 Tries to discover the vendor by looking up the enterprise number in
 C<sysObjectID>.
 
-
 =back
 
 =head2 Global Methods imported from SNMP::Info
@@ -206,6 +229,12 @@ to a hash.
 
 Returns reference to the map between IID and physical Port.
 
+=item $l7->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback, other, and cpu
+
 =back
 
 =head2 Table Methods imported from SNMP::Info

Info/Layer7/APC.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer7;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.08';
+$VERSION = '3.08';
 
 %MIBS = (
     %SNMP::Info::Layer7::MIBS,
@@ -161,7 +161,7 @@ These are methods that return scalar value from SNMP
 
 =item $apc->os()
 
-Returns 'aos'
+Returns C<'aos'>
 
 =item $apc->os_bin()
 
@@ -173,12 +173,12 @@ C<POWERNET-MIB::experimental.2.4.1.4.1>
 
 =item $apc->serial()
 
-Combines the UPS serial C<upsAdvIdentSerialNumber.0> with the managment
+Combines the UPS serial C<upsAdvIdentSerialNumber.0> with the management
 card serial C<POWERNET-MIB::experimental.2.4.1.2.1> into a pretty string.
 
 =item $apc->vendor()
 
-apc
+Returns C<'apc'>
 
 =item $apc->model()
 

Info/Layer7/Neoteris.pm

@@ -0,0 +1,164 @@
+# SNMP::Info::Layer7::Neoteris
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer7::Neoteris;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer7;
+
+@SNMP::Info::Layer7::Neoteris::ISA       = qw/SNMP::Info::Layer7 Exporter/;
+@SNMP::Info::Layer7::Neoteris::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer7::MIBS,
+    'UCD-SNMP-MIB'       => 'versionTag',
+    'JUNIPER-IVE-MIB'    => 'productVersion',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer7::GLOBALS,
+    'os_ver' => 'productVersion',
+    'cpu'    => 'iveCpuUtil',
+);
+
+%FUNCS = ( %SNMP::Info::Layer7::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer7::MUNGE, );
+
+sub vendor {
+    return 'juniper';
+}
+
+sub os {
+    return 'ive';
+}
+
+sub serial {
+    return '';
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer7::Neoteris - SNMP Interface to Juniper SSL VPN appliances
+
+=head1 AUTHORS
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $neoteris = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $neoteris->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Juniper SSL VPN appliances
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer7
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<UCD-SNMP-MIB>
+
+=item F<JUNIPER-IVE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer7> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $neoteris->vendor()
+
+Returns 'juniper'.
+
+=item $neoteris->os()
+
+Returns C<'ive'>.
+
+=item $neoteris->os_ver()
+
+C<productVersion>
+
+=item $neoteris->cpu()
+
+C<iveCpuUtil>
+
+=item $neoteris->serial()
+
+Returns ''.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=cut

Info/Layer7/Netscaler.pm

@@ -0,0 +1,215 @@
+# SNMP::Info::Layer7::Netscaler
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer7::Netscaler;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer7;
+
+@SNMP::Info::Layer7::Netscaler::ISA       = qw/SNMP::Info::Layer7 Exporter/;
+@SNMP::Info::Layer7::Netscaler::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.08';
+
+%MIBS = (
+    %SNMP::Info::Layer7::MIBS,
+    'NS-ROOT-MIB' => 'sysBuildVersion',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer7::GLOBALS,
+    'build_ver'   => 'sysBuildVersion',
+    'sys_hw_desc' => 'sysHardwareVersionDesc',
+    'cpu'         => 'resCpuUsage',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer7::FUNCS,
+    # IP Address Table - NS-ROOT-MIB::nsIpAddrTable
+    'ip_index'    => 'ipAddr',
+    'ip_netmask'  => 'ipNetmask',
+    # TODO VLAN - NS-ROOT-MIB::vlanTable
+    'ns_vid'      =>'vlanId',
+    'ns_vlan_mem' => 'vlanMemberInterfaces',
+    'ns_vtag_int' => 'vlanTaggedInterfaces',
+    );
+
+%MUNGE = ( %SNMP::Info::Layer7::MUNGE, );
+
+sub vendor {
+    return 'citrix';
+}
+
+sub os {
+    return 'netscaler';
+}
+
+sub serial {
+    return '';
+}
+
+sub model {
+    my $ns    = shift;
+    my $desc  = $ns->sys_hw_desc() || '';
+   
+    $desc =~ s/^.+\bNS//i;
+
+    return $desc;
+}
+
+sub os_ver {
+    my $ns    = shift;
+    my $ver  = $ns->build_ver() || '';
+    
+    if ($ver =~ /^.+\bNS(\d+\.\d+)/) {
+        $ver = $1;
+    }
+    return $ver;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer7::Netscaler - SNMP Interface to Citrix Netscaler appliances
+
+=head1 AUTHORS
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ns = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $ns->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Citrix Netscaler appliances
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer7
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<NS-ROOT-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer7> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ns->vendor()
+
+Returns 'citrix'.
+
+=item $ns->os()
+
+Returns 'netscaler'.
+
+=item $ns->os_ver()
+
+Release extracted from C<sysBuildVersion>.
+
+=item $ns->model()
+
+Model extracted from C<sysHardwareVersionDesc>.
+
+=item $ns->cpu()
+
+C<resCpuUsage>
+
+=item $ns->build_ver()
+
+C<sysBuildVersion>
+
+=item $ns->sys_hw_desc()
+
+C<sysHardwareVersionDesc>
+
+=item $ns->serial()
+
+Returns ''.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $ns->ip_index()
+
+C<ipAddr>
+
+=item $ns->ip_netmask()
+
+C<ipNetmask>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=cut