release 3.21_001

Correct VLAN mapping of FDB entries in L3::Juniper

.gitignore

@@ -0,0 +1,9 @@
+*.db
+SNMP
+*.komodo*
+blib/
+META.*
+MYMETA.*
+Makefile
+Makefile.old
+pm_to_blib

ChangeLog

@@ -1,5 +1,354 @@
 SNMP::Info - Friendly OO-style interface to Network devices using SNMP.
 
+version 3.21_001 (2014-11-14)
+
+   [NEW FEATURES]
+
+    * Support obtaining FDB in Avaya SPBM edge deployments in L2::Baystack
+      NOTE: This requires a RAPID-CITY MIB with the rcBridgeSpbmMacTable
+    * Support for Fortinet devices in new class L3::Fortinet
+
+   [ENHANCEMENTS]
+
+    * No longer ignore interfaces based on name, in base L2/L3/L7 device
+      classes. For several device classes SNMP::Info will now return tunnel
+      interfaces and/or loopbacks, if present.
+    * Use dot1qVlanCurrentTable if available to capture dynamic and static
+      VLANs, fall back to dot1qVlanStaticTable if not available.
+    * New method i_vlan_membership_untagged() for VLANs transmitted as
+      untagged frames.
+    * Capture Aruba AP hardware and software version when available 
+
+   [BUG FIXES]
+
+    * [#64] Misdetection: Wireless APs, add products MIB to L2::3Com
+    * Use FDB ID to VID mapping if available to determine end station VLAN
+      rather than assuming they are the same.
+    * Capture port VLANs on Cisco interfaces which are configured for
+      trunking but are not in operational trunking mode
+    * Correct munging of stp_p_port(), i_stp_port(), and stp_root() methods
+      in Bridge
+    * In LLDP.pm don't create a variable in a conditional
+
+version 3.20 (2014-09-08)
+
+   [NEW FEATURES]
+
+    * Override layers in Juniper for routers with switch modules
+
+   [BUG FIXES]
+
+    * Update MANIFEST to include Ubiquiti files
+
+version 3.19 (2014-08-01)
+
+   [NEW FEATURES]
+
+    * Support for Ubiquiti Access Points in new class L2::Ubiquiti (begemot)
+    * Preliminary support for 3Com switches in new class L2::3Com (begemot)
+
+   [BUG FIXES]
+
+    * Fix Avaya detection lldp_port()
+    * Silence uninitialized value warning in L3::Cisco
+    * H3C fixes (begemot)
+    * Only use L2::ZyXEL_DSLAM for ZyXEL DSL modules
+
+version 3.18 (2014-07-02)
+
+   [ENHANCEMENTS]
+
+    * Pseudo ENTITY-MIB methods added to L3::Tasman for hardware information
+    * Capture VPC Keepalive IP addresses in L3::Nexus (jeroenvi)
+    * L2::Netgear inheritance clean up and removal of unnecessary c_* methods
+      defined in Info base class
+
+   [BUG FIXES]
+
+    * Correctly identify device type (class) for instantiated objects which
+      have overridden layers.
+    * [#58] Fix inheritance in L3::FWSM and L3::CiscoASA
+    * [#71] Don't try to match on a false port description in lldp_if
+    * [#54] Possible bad values returned for cdp_id and lldp_port with some HP
+      gear (Joel Leonhardt)
+
+version 3.17 (2014-06-23)
+
+   [ENHANCEMENTS]
+
+    * POD tests are not required for distribution.
+
+version 3.16 (2014-06-23)
+
+   [ENHANCEMENTS]
+
+    * Add method resolution discovery in SNMP::Info::MRO helper module
+    * Consolidate CiscoImage class into CiscoStats class
+    * Clean up inheritance for Cisco classes.  With this change
+      all applicable classes now inherit CiscoAgg, CiscoStpExtensions,
+      CiscoPortSecurity, CiscoPower, and LLDP classes.
+    * Remove inheritance of classes the devices do not support in L3::FWSM
+      and L3::CiscoASA
+
+   [BUG FIXES]
+
+    * Use CiscoVTP methods to get interface VLAN in L3::Cisco rather than
+      solely relying on the interface description.
+
+version 3.15 (2014-07-10)
+
+   [NEW FEATURES]
+
+    * Offline mode and Cache export/priming.
+
+   [ENHANCEMENTS]
+
+    * Return serial number for Cisco 3850 from entPhysicalSerialNum
+
+   [BUG FIXES]
+
+    * Cisco SB serial number probably did not work
+
+version 3.14 (2014-06-07)
+
+   [ENHANCEMENTS]
+
+    * Improvements to Mikrotik module (Alex Z)
+    * Don't unshift length from broken lldpRemManAddrTable implementations (G. Shtern)
+    * 802.3ad LAG support in Layer3::H3C
+    * Add LLDP capabilities to Layer2::HPVC class
+
+   [BUG FIXES]
+
+    * Return correct VLAN info with qb_fw_table() on Layer2::HP
+
+version 3.13 (2014-03-27)
+
+   [ENHANCEMENTS]
+
+    * Cisco PAgP support added to LAG method
+    * HP ProCurve LAG support by inheriting Info::Aggregate class
+
+version 3.12 (2014-02-10)
+
+   [ENHANCEMENTS]
+
+    * Modify L3::Passport to obtain forwarding table information from
+      RAPID-CITY if information is not available in either Q-BRIDGE-MIB or
+      BRIDGE-MIB.  Needed for VSP 9000 prior to version 4.x (Tobias Gerlach)
+
+   [BUG FIXES]
+
+    * [#52] NETSCREEN-IP-ARP-MIB considered harmful
+    * Foundry/Brocade aggreate port master ifIndex resolved properly
+
+version 3.11 (2014-01-26)
+
+   [NEW FEATURES]
+
+    * [#31] port-channel (aggregate) support.  Aggregate support added in new
+      agg_ports() method.  Inital support added for Arista (ifStack),
+      Avaya (MLT), Brocade (MST), and Cisco (802.3ad).
+
+   [ENHANCEMENTS]
+
+    * Use Q-BRIDGE-MIB as default with fallback to BRIDGE-MIB across all
+      classes for the fw_mac, fw_port, and fw_status methods
+    * Additional support for Avaya 8800 series in L3::Passport
+
+   [BUG FIXES]
+
+    * Modify cdp_cap() to handle devices which return space delimited strings
+      for cdpCacheCapabilities rather than hex strings
+    * [#51] Netdisco shows broken topology for devices with no alias entry
+      for primary IP - Collect nsIfMngIp when getting IP interfaces in
+      L3::Netscreen
+    * Fix Extreme XOS i_vlan_membership - Revert [28bbe0], fix bug with
+      untagged being added to @ret twice (Robert Kerr)
+    * Skip default CPU management addresses on VSP and 8800/8600 series in
+      L3::Passport to prevent erroneous duplicate addresses
+
+version 3.10 (2013-12-16)
+
+   [BUG FIXES]
+
+    * Data values of zero are now sent to munge method instead of skipped
+
+version 3.09 (2013-12-15)
+
+   [NEW FEATURES]
+
+    * [#45] IBM (Blade Network Technologies) Rackswitch support in new class
+      L3::IBMGbTor
+    * [] set_i_untagged combines both set_i_vlan and set_i_pvid in one method
+    * [#41] Riverbed Steelhead support added in new class L3::Steelhead
+    * New c_cap(), cdp_cap(), and lldp_cap() methods which return a hash of
+      arrays with each array containing the system capabilities reported as
+      supported by the remote system via CDP or LLDP.
+
+   [ENHANCEMENTS]
+
+    * Remove "Switch" from model name in L3::Foundry
+    * [#49] IOS-XR support, add identification of IOS XR and version in
+      CiscoStats
+    * Aruba POE Support
+    * Aruba utilizes Q-BRIDGE-MIB when available for VLAN information to
+      better support wired switches
+    * Add lldp_platform() method which uses lldp_rem_sysdesc() or
+      lldp_rem_sysname() to provide a clue to type of remote LLDP capable
+      device.
+    * [RT#78232] Extend cdpCacheCapabilities to show more CDP bits
+
+   [BUG FIXES]
+
+    * Modify _xos_i_vlan_membership() in L3::Extreme to only include tagged
+      ports
+    * When determining the BSSID in Airespace there is only one hexadecimal
+      digit available so skip if outside the range of 1-16, 17 is reserved
+      for 3rd party AP's
+    * Don't assume entity index 1 is the chassis and has serial in Layer3
+    * Capture serial number on newer Aruba devices
+    * munge_bits() correctly unpacks BITS
+    * Fix for single instance table leafs in test_class_mocked.pl
+    * Fix power module indexing
+
+version 3.08 (2013-10-22)
+
+   [ENHANCEMENTS]
+
+    * Rewrite of L3::Aruba, now supports pseudo ENTITY-MIB methods to gather
+      module information, more interface information for APs, more
+      wireless information to include client stats, and arpnip information
+      from wireless clients.  WARNING: AP device interfaces are now based on
+      AP MAC and radio versus BSSID to align with other wireless classes.
+    * [#64] Add i_speed_admin() to L2::2900 (psychiatric)
+    * [#66] Support for VSS via CISCO-VIRTUAL-SWITCH-MIB in L3::6500
+    * [#67] Add the possibility to set speed for Layer3::C4000 (psychiatric)
+    * [#69] set speed and duplex on Cisco VSS system (psychiatric)
+    * munge_null() now removes all non-printable control characters
+    * Support Aironet standalone access points (Layer2::Aironet) running IOS15
+    * lldp_port() returns port ID instead of port description if the port ID
+      subtype is "interface name".  This improves the ability to correlate
+      ports by name when a port description is also set.
+    * Add docs note about make_snmpdata.pl under EXTENDING SNMP::Info
+    * [#46] Brocade (Foundry) Module Support
+    * Brocade (Foundry) POE Support
+    * Support peth_port_power() power supplied by PoE ports in L2::Baystack
+    * Update test_class.pl utility to allow ignore of snmp.conf and test
+      summarize more standard class methods
+    * On EOS, the LLDP port ID is a dot1d port
+    * Use LLDP in Layer3::Aruba, for switches
+    * Clean up more model names in L2::Baystack
+
+   [BUG FIXES]
+
+    * [#68] Fix device_port entries for switches with non-unique
+      ifDesc (Nic Bernstein)
+    * Don't try to munge undef values
+    * [#49] Perl 5.18 UNIVERSAL::can change could cause infinite loop
+    * Silence warning from uninitialized variable in L3::Passport e_descr()
+
+version 3.07 (2013-10-01)
+
+   [ENHANCEMENTS]
+
+    * Support for Pica8 switches in L3::Pica8
+    * Factor out cache/munge code from global/attr methods
+
+   [BUG FIXES]
+
+   * [#48] Switch duplicate J9624A for J9626A in Layer2/HP (R. Kerr)
+   * Correct device serial number reporting for Nexus devices
+   * Override ipAddrTable methods in L3::Nexus as some versions do not
+     index the table with the IPv4 address in accordance with the MIB
+     definition.
+
+version 3.05 (2013-08-16)
+
+   [ENHANCEMENTS]
+
+    * [#47] Add model info on HP 2530 and HP 2920 series
+    * Add support for Cisco Small Business series
+      Layer2/CiscoSB class
+    * Add proper LLDP support to Netgear.pm
+    * Change $netgear->interfaces() to use ifName rather than ifDescr
+      as the former is unique per interface while the latter is not.
+      If ifName is not present, concatenate ifDescr and ifIndex
+      to achieve a unique value.
+    * Properly report hardware version, Serial No. and OS Version for
+      Netgear.
+
+version 3.03 (2013-07-11)
+
+    [BUG FIXES]
+
+    * Add missing =back to POD (A. Hartmaier)
+
+version 3.02 (2013-07-08)
+
+    [ENHANCEMENTS]
+
+    * Properly pull os_ver from Netgear GS series switches.
+    * Support Alcatel devices with layer3 features.
+    * Identify Cisco Aironet 1140 APs as Layer2::Aironet
+    * LAN switch support added to Layer3::Aruba class
+    * [RT#86725] - Identify Cisco Catalyst 3850 as Layer3::C6500 (C. Causer)
+
+version 3.01 (2013-04-13)
+
+    [API Changes]
+
+    * The methods c_ip(), c_if(), c_port(), c_id(), and c_platform() now
+      represent common topology methods and will try to return a combined
+      hash of data from all L2 topology protocols either running on the
+      device or specified in the method call.  The topology specific methods
+      have been been prefixed with the protocol name in lowercase so that
+      they can be called directly, sonmp_ip(), cdp_ip(), etc.
+    * L2::Bay and L2::Foundry have been removed from the distribution.  Both
+      classes were depreciated and all functionality is available through
+      L2::Baystack and L3::Foundry.
+
+    [NEW FEATURES]
+
+    * [3160037] - Support _raw suffix on methods to skip munging
+    * [3185391] - Support for F5 devices in new class L3::F5
+    * [3323814] - Arp support for Netscreen (David Baldwin)
+    * [3323821] - Support for Netscreen w/ WLAN (eg SSG5) (David Baldwin)
+    * [3599277] - Q-BRIDGE Support to collect VLAN in macsuck
+    * [3033731] - Alcatel-Lucent OmniSwich AMAP Support in new AMAP class
+    * [3598896] - Lantronix device support (J R Binks)
+    * [3598337] - Lantronix SLC support
+    * Support for Cisco ASA in L3::CiscoASA (Kraus/Hartmaier/Bernstein)
+    * Support for Avaya VSP 9000 series in L3::Passport
+    * Support for Avaya VSP 7000 series in L2::Baystack
+    * Support Avaya (Trapeze) Wireless Controllers in new class L2::NWSS2300
+    * Support Juniper (Trapeze) Wireless Controllers in new class L2::Trapeze
+    * Support for newer Radware Alteon ADC switches 4408/4416/5412/5224 and
+      older AWS 2000/3000 series in existing L3::AlteonAD
+    * Support for H3C & HP A-series in new class L3::H3C
+    * Support for Citrix Netscaler appliances in new class L7::Netscaler
+    * New configuration option IgnoreNetSNMPConf will ignore Net-SNMP
+      configuration files on object initialization
+    * Two new utilities added in t/util to assist in developing device
+      support; make_snmpdata.pl gathers SNMP data (snmpwalk) in a format that
+      can be used with test_class_mocked.pl which mocks an SNMP agent to
+      enable testing with no network access to a device.
+
+    [ENHANCEMENTS]
+
+    * UNIVERSAL::can() now works with dynamic methods
+    * Dynamically generated methods are added to symbol table to avoid
+      AUTOLOAD on subsequent calls
+    * L2::Airespace now supports 802.11n client tx rates
+    * L2::Airespace now reports AP Ethernet MAC as port MAC for radio ports
+    * CiscoStats improvements to determine os versions, eg IOS XE ver on Sup7L-E
+    * CiscoStats now reports 'ios-xe' if the device runs IOS XE (used to be 'ios')
+    * Improved support of XOS based Extreme devices
+
+    [BUG FIXES]
+
+    * [3564920] - lldp_if gives wrong data for Enterasys
+
 version 2.11 (2012-12-09)
 
     [BUG FIXES]
@@ -19,20 +368,20 @@ version 2.09 (2012-11-28)
     * New method i_ssidmac() to get BSSID's from AP's with initial support
       in L2::Aironet and Airespace classes
     * Support for Avaya Secure Routers in new class L3::Tasman
-    * Add EDP and LLDP L2 Topology to L3::Extreme 
+    * Add EDP and LLDP L2 Topology to L3::Extreme
     * [3185393] Support for Juniper SSL VPN in new class L7::Neoteris
-    * [3381027] Support for Cisco Nexus in new class L3::Nexus   
+    * [3381027] Support for Cisco Nexus in new class L3::Nexus
     * [1424336] Support for Extreme Discovery Protocol (EDP)
-    
+
     [ENHANCEMENTS]
 
-    * [3017571] Add LLDP support for NetSNMP device class (begemot) 
+    * [3017571] Add LLDP support for NetSNMP device class (begemot)
     * [3418918] Extreme devices now report OS as either extremeware or xos
     * [2809045] Strip preceding netscreen from model name in L3::Netscreen
     * [] Classify Linksys 2024 as L3::Dell (Rogier Krieger)
-    
+
     [BUG FIXES]
-    
+
     * Fixed logic to return cached data for table methods when available and
       not a partial fetch
     * Fix typo in PoD for Bridge.pm and CiscoConfig.pm (William Bulley)
@@ -52,7 +401,7 @@ version 2.08 (2012-07-15)
 
     * Pseudo ENTITY-MIB methods added to L3::Juniper for hardware information
     * Add method to report current transmit power of the radio interface,
-      dot11_cur_tx_pwr_mw(), in Airespace class 
+      dot11_cur_tx_pwr_mw(), in Airespace class
     * [3085411] Activate L3 properties for Netgear GSM7224v2 (phishphreek)
     * [3085413] SNMP OIDs for Netgear Serial and OS Ver (phishphreek)
     * [3286549] Dell LLDP Support (Nico Giefing)
@@ -101,7 +450,7 @@ version 2.06 (2011-09-28)
     * [3344843] Fix returning serial() and os_ver() for web-managable HP
       switches, introduced by HP/HP4000 class split, reported by J R Binks
     * [2809033] Put L2-only Cisco blade switches in L3::C6500
-    * [3408506] Fix uninitialized value in IPv6 when neighbor state is 
+    * [3408506] Fix uninitialized value in IPv6 when neighbor state is
       incomplete (Michael Borgelt)
 
 version 2.05 (2011-06-23)
@@ -117,13 +466,13 @@ version 2.04 (2011-03-31)
       (Brian De Wolf)
     + Added L3::Pf for FreeBSD PFSense Firewalls (max)
     * Added specific functions for neighbor mgmt addresses to CDP class
-    * Implemented os_bin() method in CiscoStats 
+    * Implemented os_bin() method in CiscoStats
     + [2980787] Fix for C1900 bp_index not containing interfaces.
       (Brian De Wolf)
     + [2599795] Added vendor_i_type() method to HP and HP4000 clases
     + [2688801] Minor modification for obscure Proxim/Orinoco device
       (jrbinks)
-    + [3051443] Add PoE measured power per port to Cisco, Extrme and HP 
+    + [3051443] Add PoE measured power per port to Cisco, Extrme and HP
       classes (jeroenvi)
     * Minor tweaks to support devices without sysServices
     * Added Cisco CBS3xxx blade switches to L3::C6500
@@ -161,7 +510,7 @@ version 2.00 (08/01/08)
     + Support for Alcatel-Lucent Service Router via L3::Timetra
     + Support for Alcatel-Lucent OmniAccess via L2::Aruba
 
-    * Silence warnings in MAU due to uninitialized variables 
+    * Silence warnings in MAU due to uninitialized variables
 
 version 1.09 (07/22/08) - Beta/developer release
     + Added support for HP ProCurve Foundry OEM switches, such as the 9300
@@ -185,7 +534,7 @@ version 1.09 (07/22/08) - Beta/developer release
     + Add support to specify MIB to resolve leaf names conflicts in
       %GLOBALS and %FUNCS.
     + Added munge_port_list() and modify_port_list() methods to assist in
-      working with PortList objects. 
+      working with PortList objects.
     + Added set_multi() method to enable a SNMP set command on several new
       values in one request.  Required for complex set operations
       on some agents.
@@ -212,7 +561,7 @@ version 1.05 (11/25/07) - CVS only. No official release
       Augenstein)
     + Added device specific support for LLDP in L2::HP, L2::Baystack,
       L3::Enterasys and L3::Foundry
-    + Added support for Enterasys devices as new class L3::Enterasys 
+    + Added support for Enterasys devices as new class L3::Enterasys
     + Added support for Dell PowerConnect switches as new class L3::Dell
     + Added basic support for generic routers running Microsoft Windows OS
       as new class L3::Microsoft (begemot)
@@ -236,7 +585,7 @@ version 1.05 (11/25/07) - CVS only. No official release
     + New class IEEE802dot11 class for generic standards based wireless AP
       support to include i_ssidlist()and i_80211channel() methods.
     + L2::Orinoco inherits from new IEEE802dot11 for i_ssidlist()and
-      i_80211channel() support. 
+      i_80211channel() support.
     + Added new VLAN methods i_pvid(), i_vlan_membership(), set_i_pvid(),
       set_i_vlan(), set_add_i_vlan_tagged(), set_remove_i_vlan_tagged() to
       Bridge, CiscoVTP, Extreme, HP, and RapidCity classes.
@@ -298,14 +647,14 @@ version 1.04 (07/08/06)
     +  Added C1130 and C1240 to L2::Aironet (Ralf Gross)
     +  Added detection for Cisco 2960, 2940, 3400 w/ MetroBase
     +  Added generic L2::Cisco Class
-    *  Corrected detection for Cisco Supervisor Engine 2 and 32 (IOS).  
+    *  Corrected detection for Cisco Supervisor Engine 2 and 32 (IOS).
     *  Fixed warnings in CiscoStack
     *  Updated ProCurve HP device detection for newer firmwares
 
 version 1.03 (04/14/06) - Beta/developer release
     * Use ipNetToMedia table instead of atTable for ARP
     * Remove CiscoStack from Layer3::C4000
-    * Fixed bug in MAU class when polling devices without MAU-MIB support 
+    * Fixed bug in MAU class when polling devices without MAU-MIB support
 
 version 1.01 (04/08/06) - Beta/developer release
     + Change version numbers to X.XX format.  Odd releases are beta
@@ -371,15 +720,15 @@ version 1.0 (04/07/06) - CVS only. No official release
       translated properly
 
 verison 0.9 (11/15/04)
-    + ** Added full Nortel/Bay/BayStack support 
-        by new developer Eric Miller.  
+    + ** Added full Nortel/Bay/BayStack support
+        by new developer Eric Miller.
         L2::Bay now depricated.
     + Added Alteon Ace support (Eric Miller)
     + Added Nortel Cotivity support (Eric Miller)
     + Added Nortel BayRS support (Eric Miller)
     + Added Nortel Centillion support (Eric Miller)
     + Added Nortel AP 222x support (Eric Miller)
-    + Added Orinco AP support (Eric Miller) 
+    + Added Orinco AP support (Eric Miller)
     + Added i_lastchange() per suggestion of Nicolai Petri
     + Added BULKWALK patch by Bradley Baetz - This should
           greatly speed up requests on SNMPv2c devices.
@@ -429,27 +778,27 @@ version 0.6 (06/18/03)
 
 version 0.5 (06/10/03)
     * Added ability to get paritial tables.  For example to get the
-      IP routing table for 128.114.*  you can do 
+      IP routing table for 128.114.*  you can do
       $ipr = $dev->ipr_dest('128.114');
     * Added IP Routing Table entries from RFC1213 to SNMP::Info
     * minor bug fixes
 
 version 0.4 (04/29/03)
-    * BIG CHANGE ! Internal Data structure has changed.  
+    * BIG CHANGE ! Internal Data structure has changed.
     * Added clear_cache() method
-    * Added NO_SUCH support for snmpget (TABLE) calls to get SNMP MIB II data 
+    * Added NO_SUCH support for snmpget (TABLE) calls to get SNMP MIB II data
       from SNMP Version 1 devices.
     * Methods load_all() and all() have changed their return value. Sorry but
       the API had to change.
     * New object methods snmp_comm(), snmp_ver(), store(), class(), nosuch()
       to make it more OO happy.
     * Globals are now cached
-    * Added new argument 'AutoSpecify' to new() to auto-connect with subclass 
+    * Added new argument 'AutoSpecify' to new() to auto-connect with subclass
       detected in device_type()
     * New method specify() returns a new subclass object
     * Subclasses are automatically loaded when specify or autospecify is used!
     * Added methods for Interface statistics (ifInOctets ...)
-    * Added methods for Memory and CPU statistics 
+    * Added methods for Memory and CPU statistics
     * Added SNMP::Info::Entity, moved out of L2-HP
     * Added SNMP::Info::Layer2::Aironet
 
@@ -462,7 +811,7 @@ version 0.3 (03/06/03)
       Thanks to Martin Lorensen <martin /at- lorensen.dk>
     * Removed requirement for SNMP in the Makefile.PL and moved it to t/prereq.t
       so that the Module will install via CPAN without trying to install the old
-      4.2.0 version of SNMP on CPAN.  Will now fail in the test phase. 
+      4.2.0 version of SNMP on CPAN.  Will now fail in the test phase.
       Thanks again to Martin Lorensen <martin /at- lorensen.dk>
     * Moved tests from test.pl to t/*
 
@@ -472,10 +821,10 @@ version 0.2 (02/19/03)
     * Fixed HP Detection in device_type()
     * Added Spanning Tree Protocol (STP) methods to SNMP::Info::Bridge
     * Removed HP Specific MIBS in SNMP::Info::Layer2 and cleaned up model()
-    * Added poke for Bay 450 Switches 
+    * Added poke for Bay 450 Switches
     * Mapped HP Part Numbers to model numbers J4812A => 2512 in
       SNMP::Info::Layer2::HP
-     
+
 version 0.1 (12/30/02)
     * Initial Release
     * SubClasses Included:
@@ -485,13 +834,13 @@ version 0.1 (12/30/02)
         * SNMP::Info::MAU
         * SNMP::Info::Layer1
               o SNMP::Info::Layer1::Allied
-              o SNMP::Info::Layer1::Asante 
+              o SNMP::Info::Layer1::Asante
         * SNMP::Info::Layer2
               o SNMP::Info::Layer2::Bay
               o SNMP::Info::Layer2::C1900
               o SNMP::Info::Layer2::C2900
               o SNMP::Info::Layer2::Catalyst
-              o SNMP::Info::Layer2::HP 
+              o SNMP::Info::Layer2::HP
         * SNMP::Info::Layer3
               o SNMP::Info::Layer3::Aironet
               o SNMP::Info::Layer3::Foundry

DeviceMatrix.txt

@@ -4,26 +4,25 @@
 # This file is meant to detail the cababilities
 # of network devices to supply data via SNMP.  
 
-# $Id$
-
 #
 # Airespace (pre-Cisco)
 #
 device-vendor: Airespace
-cdp:no
-arpnip: no
-macsuck: yes
-portmac: yes
+arpnip: yes
+topo:no
 duplex: both
-vlan: yes
+macsuck: yes
 modules: yes
+portmac: yes
+vlan: yes
 class: Layer2::Airespace
 
 device-family: Airespace Wireless Controllers
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
 note: Device will only communicate with SNMP version configured in the controller.
 
-device: 3500, 4101, 4102
+device: All
 
 #
 # Alcatel-Lucent
@@ -46,7 +45,7 @@ device: All
 # Allied
 #
 device-vendor: Allied Telesis
-cdp:no
+topo:no
 class: Layer1::Allied
 ver: 1
 arpnip: no
@@ -63,13 +62,27 @@ ver: 2
 macsuck: yes
 device: All
 
+#
+# Alteon
+#
+device-vendor: Alteon
+note: See Radware
+
 #
 # Altiga
 #
 device-vendor: Altiga
-class: Layer3::Altiga
 note: See Cisco/Altiga
 
+#
+# APC
+#
+device-vendor: APC
+class: Layer7::APC
+device-family: UPS
+device: All
+note:  Must be SNMP management enabled.
+
 #
 # Arista
 #
@@ -88,8 +101,11 @@ portmac: yes
 duplex: no
 class: Layer3::Aruba
 
-device-family: Aruba Wireless Controllers
+device-family: Aruba Wireless Controllers and LAN switches
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: On LAN switches, hosts connected to "trusted" switch ports in "access" mode may be mapped to incorrect ports.
+
+device: 3500
 
 device: 5000
 
@@ -109,17 +125,242 @@ device-family: Asante Hubs
 
 device: 1012
 
+#
+# Avaya
+#
+device-vendor: Avaya
+macsuck: yes
+topo: yes
+
+device-family: BayStack Hub
+duplex: both
+ver: 1
+modules: yes
+class: Layer1::Bayhub
+note: Uses proprietary MIBs to provide MAC to port mapping.
+note: !Requires Advanced or Advanced Analyzer NMM
+
+device: 102
+
+device: System 5000
+
+device-family: Ethernet Switch/Baystack Switch
+macsuck: yes
+duplex: both
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: 303, 304, 350, 380, 410, 420, 425, 460, 470
+
+device: 450
+note: !Some versions > 4.X in stacked configuration have SNMP timeout issues. 
+note: Labels full duplex as 20Mbit connection.
+
+device: Business Policy Switch (BPS)
+
+device-family: Ethernet Routing Switch
+arpnip: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: 2500, 3500, 4500, 4800, 5500, and 5600 series
+
+device-family: Virtual Services Platform (VSP) 7000 
+arpnip: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: 7024
+
+device-family: Business Ethernet Switch
+arpnip: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer2::Baystack
+
+device: All 
+
+device-family: Centillion
+duplex: both
+vlan: yes
+class: Layer2::Centillion
+note: !Must be on version 4.x or 5.x (VLAN based) software.
+
+device: C50, C100, 5000BH, and 5005BH
+
+device-family: AP222x
+duplex: both
+modules: no
+class: Layer2::NAP222x
+note: !Upgrade to version 1.3 or higher.
+note: Sends out topology packets if enabled but does not build neighbor table.
+
+device: AP-2220, AP-2221
+
+device-family: Multiprotocol Router/BayRS
+arpnip: yes
+portmac: yes
+duplex: both
+topo: no
+vlan: yes
+modules: yes
+class: Layer3::BayRS
+
+device: AN, ARN, ASN, BLN, BCN, 2430, and 5430
+
+device-family: Secure Router
+arpnip: yes
+portmac: yes
+duplex: no
+topo: no
+vlan: no
+modules: no
+class: Layer3::Tasman
+
+device: 1001/1001S,1002,1004,2330,3120,4134
+
+device-family: VPN Router/Contivity
+arpnip: yes
+macsuck: no
+portmac: yes
+duplex: no
+topo: no
+modules: yes
+class: Layer3::Contivity
+
+device: All
+
+device-family: Ethernet Routing Switch/Passport/Accelar LAN
+arpnip: yes
+portmac: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer3::Passport
+note: !8600 Code versions < 3.2 vlan based mac-suck and are unsupported.  Upgrade code.
+note: !8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop.  Upgrade code.
+
+device: 8100, 8300, 8600, and 8800 series 
+
+device: Passport 1600 series
+note: Software >= 2.1
+
+device: Accelar 1050,1100,1150,1200
+
+device-family: Virtual Services Platform (VSP) 9000
+arpnip: yes
+portmac: yes
+duplex: write
+vlan: write
+modules: yes
+class: Layer3::Passport
+
+device: 9000
+
+device-family: Ethernet Routing Switch/Passport 1600 (Software < 2.1)
+arpnip: yes
+portmac: yes
+duplex: both
+vlan: write
+class: Layer3::N1600
+
+device: 1612,1624,1648
+
+device-family: Synoptics
+duplex: both
+ver: 1
+class: Layer1::S3000
+note: Uses proprietary MIBs to provide MAC to port mapping.
+note: !Requires Advanced or Advanced Analyzer NMM
+
+device: 281X
+
+device: System 3000
+
+device-family: Wireless Switch 2270
+arpnip: yes
+duplex: both
+modules: yes
+portmac: yes
+vlan: yes
+class: Layer2::N2270
+note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
+
+device: 2270
+
+device-family: Wireless Security Switches 2300 Series 
+arpnip: yes
+portmac: yes
+duplex: both
+topo: no
+modules: yes
+class: Layer2::NWSS2300
+note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
+
+device: All
+
 #
 # Bay
 #
 device-vendor: Bay
-note: See Nortel
+note: See Avaya
+
+#
+# Brocade
+#
+device-vendor: Brocade
+arpnip: yes
+topo: yes
+duplex: link
+macsuck: yes
+modules: no
+portmac: yes
+vlan: yes
+class: Layer3::Foundry
+
+device-family: EdgeIron
+device: EdgeIron 24G
+note: Bug where spanning tree stuff loops forever when polled by SNMP.
+
+device-family: FastIron
+ver: 1
+note: Support very limited
+device: FastIron 4802
+
+device-family: FastIron CX (ICX) series
+device: 6430,6450,6610
+
+device-family: FastIron LS (FLS) series
+device: All
+
+device-family: FastIron WorkGroup Switch (FWS) series
+device: All
+
+device-family: ServerIron GT series
+device: All
+
+#
+# Bluecoat
+#
+device-vendor: Bluecoat
+class: Layer3::Bluecoat
+
+device-family: BlueCoat SG Series
+device: All
 
 #
 # CISCO
 #
 device-vendor: Cisco
-cdp: yes
+topo: yes
 ver: 2
 modules: yes
 
@@ -143,6 +384,10 @@ class: Layer3::Altiga
 device: VPN3000
 note: The Cisco 3000 device can return duplicate interface names, while Netdisco expects unique interface names.  To ensure unique device names I append numbers only when an interface name would not be unique without one. Interfaces with unique names keep their ifDescr name.
 
+device: ASA
+note: The Cisco ASA is the successor of the PIX which was bought from Altiga Networks.
+class: Layer3::CiscoASA
+
 device-family: 1000
 duplex: no
 ver: 1
@@ -391,15 +636,16 @@ device: VG200
 
 device-family: Wireless Controllers
 class: Layer2::Airespace
-cdp:no
-arpnip: no
+arpnip: yes
+duplex: both
 macsuck: yes
 portmac: yes
-duplex: both
+vlan: yes
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
 note: Device will only communicate with SNMP version configured in the controller.
 
-device: 2006, 4112, 4124, 4136, 4402, 4404
+device: 2000, 2100, 2500, 4100, 4400, and 5500 series
 
 device-family: Firewall
 class: Layer3::Cisco
@@ -411,6 +657,28 @@ note: !Arpnip only available for 4.x software releases.
 class: Layer3::CiscoFWSM
 arpnip: yes
 
+device: Sx300, Sx500 series
+device-family: Small Business switches
+class: Layer2::CiscoSB
+arpnip: no
+macsuck: yes
+
+#
+# Citrix
+#
+device-vendor: Citrix
+arpnip: no
+topo: no
+duplex: no
+macsuck: no
+modules: no
+portmac: yes
+vlan: no
+class: Layer7::Netscaler
+
+device-family: Netscaler
+device: All
+
 #
 # Cyclades
 #
@@ -427,7 +695,7 @@ arpnip: no
 macsuck: yes
 duplex: both
 vlan: yes
-cdp: no
+topo: yes
 modules: yes
 class: Layer3::Dell
 
@@ -455,7 +723,7 @@ arpnip: yes
 macsuck: yes
 duplex: both
 vlan: yes
-cdp: yes
+topo: yes
 modules: yes
 class: Layer3::Enterasys
 
@@ -472,62 +740,37 @@ device: Matrix N-Series DFE
 #
 device-vendor: Extreme Networks
 arpnip: yes
-macsuck: yes
+topo: yes
 duplex: both
-vlan: yes
-cdp: no
+macsuck: yes
 modules: yes
+portmac: yes
+vlan: yes
 class: Layer3::Extreme
 
-device-family: Alpine and Summit
+device-family: ExtremeWare based devices
+device: All
 
-device: Alpine 3808
-device: Summit 7i, 48si
+device-family: XOS based devices
+device: All
 
 #
 # FreeBSD
 #
 device-vendor: FreeBSD
-device-famly: Pf
-class: Layer3::Pf
 arpnip: yes
-cdp: no
+topo: no
+class: Layer3::Pf
+
 note: LLDP support might be available. See note in Layer3::Pf
+device-family: Pf
+device: All
 
 #
 # Foundry
 #
 device-vendor: Foundry Networks
-vlan: yes
-modules: no
-
-device-family: FastIron
-class: Layer3::Foundry
-ver: 1
-note: Support very limited
-
-device: FastIron 4802
-
-device-family: EdgeIron
-ver: 2
-class: Layer3::Foundry
-cdp: yes
-duplex: yes
-macsuck: yes
-device: EdgeIron 24G
-note: Bug where spanning tree stuff loops forever when polled by SNMP.
-
-device-family: IronWare
-class: Layer3::Foundry
-ver: 2
-cdp: yes
-note: FDP enabled.
-duplex: yes
-macsuck: yes
-arpnip: yes
-device: FWSX424 
-device: ServerIronGT
-device: FLS624, FLS648
+note: See Brocade
 
 #
 # HP
@@ -542,7 +785,7 @@ class:  Layer2::HP4000
 duplex: both
 macsuck: yes
 arpnip: no
-cdp: yes
+topo: yes
 vlan: write
 note: devices in this class only have CDP support
 note: VLAN info in HP-VLAN MIB
@@ -556,7 +799,7 @@ class:  Layer2::HP
 duplex: both
 macsuck: yes
 arpnip: no
-cdp: yes
+topo: yes
 vlan: write
 note: old firmware versions only have CDP support, more recent have LLDP
 note: VLAN info in Q-BRIDGE-MIB
@@ -569,21 +812,74 @@ device: 3124,3324XL,3400cl,3500,3500yl
 device: 4100GL,4200vl,5300XL,5400yy,5400zl
 device: 6108,6200yl,6400cl,6410cl,6600,6600ml,8200zl
 
-
 #
 # Juniper
 #
 device-vendor: Juniper
 arpnip: yes
+topo: yes
+duplex: link
+macsuck: yes
+modules: yes
+portmac: yes
+vlan: yes
+class: Layer3::Juniper
+
+device-family: EX-series switches
+device: All
+
+device-family: J-series router
+device: All
 
 device-family: M-series router
-class: Layer3::Juniper
 device: All
 
 device-family: NetScreen
+topo: no
+duplex: no
+modules: no
+vlan: no
 class: Layer3::Netscreen
 device: All
 
+device-family: SA-series SSL VPN appliances
+arpnip: no
+topo: no
+duplex: no
+modules: no
+vlan: no
+class: Layer7::Neoteris
+device: All
+
+device-family: SRX-series router
+device: All
+
+device-family: Wireless LAN Controllers (Trapeze)
+duplex: both
+class: Layer2::Trapeze
+note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
+
+device: All
+
+#
+# Kentrox
+#
+device-vendor: Kentrox
+class: Layer2::Kentrox
+
+device-family: Kentrox DataSMART DSU/CSU
+device: All
+
+#
+# Lantronix
+#
+device-vendor: Lantronix
+class: Layer3::Lantronix
+
+device-family: Terminal Servers
+device: All
+
 #
 # Linksys
 #
@@ -600,21 +896,31 @@ device-family: 2048
 class: Layer3::Dell
 device: All
 
-
 #
 # Microsoft
 #
 device-vendor: Microsoft
-device-family: Windows
 class: Layer3::Microsoft
+
+device-family: Windows
 device: Windows Router
 
+#
+# Mikrotik
+#
+device-vendor: Mikrotik
+class: Layer3::Mikrotik
+
+device-family: RouterOS
+device: All
+
 #
 # Netgear
 #
 device-vendor: NetGear
-device-family: Switches
 class: Layer2::Netgear
+
+device-family: Switches
 device: All
 
 #
@@ -623,6 +929,12 @@ device: All
 device-vendor: NetScreen
 note: See Juniper
 
+#
+# Neoteris
+#
+device-vendor: Neoteris
+note: See Juniper
+
 #
 # Net-SNMP
 #
@@ -637,198 +949,20 @@ device:  Linux routers
 device-family: BSD
 device:  BSD routers
 
-#
-# Kentrox
-#
-device-vendor: Kentrox
-note: MIB not yet shipped
-
-device: Kentrox DataSMART DSU/CSU
-
 #
 # NORTEL
 #
 device-vendor: Nortel
-macsuck: yes
-cdp: proprietary
-note: SONMP Discovery Protocol Supported
+note: See Avaya
 
-device-family: BayStack Hub
-duplex: both
-ver: 1
-modules: yes
-class: Layer1::Bayhub
-note: Uses proprietary MIBs to provide MAC to port mapping.
-note: !Requires Advanced or Advanced Analyzer NMM
+#
+# PacketFront
+#
+device-vendor: PacketFront
+class: Layer3::PacketFront
 
-device: 102
-
-device: System 5000
-
-device-family: Ethernet Switch/Baystack Switch
-macsuck: yes
-duplex: both
-vlan: write
-modules: yes
-class: Layer2::Baystack
-
-device: 303, 304, 350, 380, 410, 420, 425, 460, 470
-
-device: 450
-note: !Some versions > 4.X in stacked configuration have SNMP timeout issues. 
-note: Labels full duplex as 20Mbit connection.
-
-device: Business Policy Switch (BPS)
-
-device-family: Ethernet Routing Switch/Baystack Switch
-arpnip: yes
-duplex: write
-vlan: write
-modules: yes
-class: Layer2::Baystack
-
-device: 3510
-
-device: 2526,2550
-
-device: 4524,4526,4548,4550
-
-device: 5510,5520,5530
-
-device-family: Business Ethernet Switch
-arpnip: yes
-duplex: write
-vlan: write
-modules: yes
-class: Layer2::Baystack
-
-device: 50,110,120,210,220,1010,1020 
-
-device-family: Centillion
-duplex: both
-vlan: yes
-class: Layer2::Centillion
-note: !Must be on version 4.x or 5.x (VLAN based) software.
-
-device: 5000BH, 5005BH
-device: C50,C100
-
-device-family: AP222x
-duplex: both
-modules: no
-class: Layer2::NAP222x
-note: !Upgrade to version 1.3 or higher.
-note: Sends out topology packets if enabled but does not build neighbor table.
-
-device: AP-2220, AP-2221
-
-device-family: Alteon AD
-arpnip: yes
-duplex: both
-cdp: no
-vlan: yes
-modules: no
-class: Layer3::AlteonAD
-note: !Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher.
-
-device: AD2,AD3,AD4
-
-device: 180,183,184
-
-device-family: Multiprotocol Router/BayRS
-arpnip: yes
-portmac: yes
-duplex: both
-cdp: no
-vlan: yes
-modules: yes
-class: Layer3::BayRS
-
-device: AN,ARN,ASN,BLN,BCN
-
-device: 2430,5430
-
-device-family: VPN Router/Contivity
-arpnip: yes
-macsuck: no
-portmac: yes
-duplex: no
-cdp: no
-modules: yes
-class: Layer3::Contivity
-
-device: 100,400,600
-
-device: 1000,1010,1050
-
-device: 1500,1600,1700,1740,1750
-
-device: 2500,2600,2700
-
-device: 4500,4600,5000
-
-device-family: Ethernet Routing Switch/Passport/Accelar LAN
-arpnip: yes
-macsuck: yes
-portmac: yes
-duplex: write
-cdp: proprietary
-vlan: write
-modules: yes
-class: Layer3::Passport
-note: !8600 Code versions < 3.2 vlan based mac-suck and are unsupported.  Upgrade code.
-note: !8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop.  Upgrade code.
-
-device: 8603,8606,8610, 8610co, 8106, 8110
-
-device: 1050,1100,1150,1200
-
-device-family: Ethernet Routing Switch/Passport 1600 (Software < 2.1)
-arpnip: yes
-macsuck: yes
-portmac: yes
-duplex: both
-cdp: proprietary
-vlan: write
-class: Layer3::N1600
-
-device: 1612,1624,1648
-
-device-family: Ethernet Routing Switch/Passport 1600 (Software >= 2.1)
-arpnip: yes
-macsuck: yes
-portmac: yes
-duplex: write
-cdp: proprietary
-vlan: write
-class: Layer3::Passport
-
-device: 1612,1624,1648
-
-device-family: Synoptics
-macsuck: yes
-duplex: both
-cdp: proprietary
-ver: 1
-class: Layer1::S3000
-note: Uses proprietary MIBs to provide MAC to port mapping.
-note: !Requires Advanced or Advanced Analyzer NMM
-
-device: 281X
-
-device: System 3000
-
-device-family: Wireless Switch 2270
-arpnip: no
-macsuck: yes
-portmac: yes
-duplex: both
-cdp: proprietary
-modules: yes
-class: Layer2::N2270
-note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
-
-device: 2270
+device-family: DRG
+device: All
 
 #
 # Proxim
@@ -836,7 +970,7 @@ device: 2270
 device-vendor: Proxim
 macsuck: yes
 duplex: no
-cdp: no
+topo: no
 class: Layer2::Orinoco
 
 device-family: Orinoco
@@ -845,6 +979,32 @@ device: AP-1000,AP-2000,AP-4000
 
 device: WavePOINT-II
 
+#
+# Radware
+#
+device-vendor: Radware
+arpnip: yes
+topo: no
+duplex: both
+macsuck: yes
+modules: no
+portmac: yes
+vlan: yes
+class: Layer3::AlteonAD
+
+device-family: Alteon AceDirector and AceSwitch series
+note: !Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher.
+device: All
+
+device-family: Web Switch Module for IBM L2/L3 BladeCenter 
+device: All
+
+device-family: Radware Alteon Application switches (AWS 2000 and 3000 series)
+device: All
+
+device-family: Radware Alteon switches
+device: 4408,4416,5412,5224
+
 # 
 # SonicWALL
 # 
@@ -865,7 +1025,13 @@ device: Sun routers
 # Synoptics
 #
 device-vendor: Synoptics
-note: See Nortel
+note: See Avaya
+
+#
+# Trapeze
+#
+device-vendor: Trapeze
+note: See Juniper
 
 #
 # Zyxel

Info/AMAP.pm

@@ -0,0 +1,341 @@
+# SNMP::Info::AMAP
+#
+# Copyright (c) 2013 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::AMAP;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::LLDP::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::LLDP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS
+    = ( 'ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB' => 'aipAMAPRemDeviceType', );
+
+%GLOBALS = (
+
+);
+
+%FUNCS = (
+
+    # EXTREME-EDP-MIB::extremeEdpTable
+    'amap_rem_sysname' => 'aipAMAPRemHostname',
+);
+
+%MUNGE = ( 'amap_rem_sysname' => \&SNMP::Info::munge_null, );
+
+sub hasAMAP {
+    my $amap = shift;
+
+    my $amap_ip = $amap->aipAMAPIpAddr() || {};
+
+    return 1 if ( scalar( keys %$amap_ip ) );
+
+    return;
+}
+
+# Break up the aipAMAPhostsTable INDEX into MAC and IP address.
+sub _hosts_table_index {
+    my $idx  = shift;
+    my @oids = split( /\./, $idx );
+    my $mac  = join( '.', splice( @oids, 0, 6 ) );
+
+    return ( $mac, join( '.', @oids ) );
+}
+
+# Break up the aipAMAPportConnectionTable INDEX and return MAC
+sub _conn_table_mac {
+    my $idx       = shift;
+    my @oids      = split( /\./, $idx );
+    my $local_idx = shift @oids;
+    my $mac       = join( '.', splice( @oids, 0, 6 ) );
+
+    return ($mac);
+}
+
+# Since we need to get IP Addresses from the aipAMAPhostsTable which has
+# a different index (MAC, IP) than the aipAMAPportConnectionTable which holds
+# the remote device details we create a combined index and skip any
+# IPs which have an address of 0.0.0.0.  Would like to include only one
+# address since they should all originate from the same device, but we don't
+# know if they would all be reachable from the network management application.
+#
+# We don't inplement partials since this is private index function
+sub _amap_index {
+    my $amap = shift;
+
+    my $amap_ip    = $amap->aipAMAPIpAddr()    || {};
+    my $amap_rport = $amap->aipAMAPLocalPort() || {};
+
+    my %amap_index;
+    foreach my $key ( keys %$amap_ip ) {
+        my ( $mac, $ip ) = _hosts_table_index($key);
+
+        next if ( $ip eq '0.0.0.0' );
+        next unless $ip;
+
+        foreach my $idx ( keys %$amap_rport ) {
+            my $c_mac = _conn_table_mac($idx);
+
+            if ( $mac eq $c_mac ) {
+                my $index = "$idx.$ip";
+                $amap_index{$index} = $index;
+            }
+        }
+    }
+    return \%amap_index;
+}
+
+# Break up _amap_index INDEX into local index, MAC, remote index, and
+# IP address
+sub _amap_index_parts {
+    my $idx       = shift;
+    my @oids      = split( /\./, $idx );
+    my $local_idx = shift @oids;
+    my $mac       = join( '.', splice( @oids, 0, 6 ) );
+    my $rem_idx   = shift @oids;
+
+    return ( $local_idx, $mac, $rem_idx, join( '.', @oids ) );
+}
+
+sub amap_if {
+    my $amap = shift;
+
+    my $index  = $amap->_amap_index()         || {};
+    my $if_idx = $amap->aipAMAPLocalIfindex() || {};
+
+    my %amap_if;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $if_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$if_key/ ) {
+            my $if = $if_idx->{$if_key};
+            $amap_if{$key} = $if;
+        }
+    }
+
+    return \%amap_if;
+}
+
+sub amap_ip {
+    my $amap = shift;
+
+    my $index = $amap->_amap_index() || {};
+
+    my %amap_ip;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+
+        # MIB says should only be IPv4
+        next unless ( $ip =~ /\d+(\.\d+){3}/ );
+        $amap_ip{$key} = $ip;
+    }
+    return \%amap_ip;
+}
+
+sub amap_port {
+    my $amap = shift;
+
+    my $index      = $amap->_amap_index()      || {};
+    my $amap_rport = $amap->aipAMAPLocalPort() || {};
+    my $amap_rslot = $amap->aipAMAPLocalSlot() || {};
+
+    my %amap_port;
+    foreach my $key ( sort keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $p_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$p_key/ ) {
+            my $port = $amap_rport->{$p_key};
+            my $slot = $amap_rslot->{$p_key} || 0;
+            next unless $port;
+            $amap_port{$key} = defined $slot ? "$slot\/$port" : $port;
+        }
+    }
+    return \%amap_port;
+}
+
+sub amap_id {
+    my $amap = shift;
+
+    my $index     = $amap->_amap_index()      || {};
+    my $amap_name = $amap->amap_rem_sysname() || {};
+
+    my %amap_name;
+    foreach my $key ( sort keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $id_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$id_key/ ) {
+            my $name = $amap_name->{$id_key} || 0;
+            next unless $name;
+            $amap_name{$key} = $name;
+        }
+    }
+    return \%amap_name;
+}
+
+sub amap_platform {
+    my $amap = shift;
+
+    my $index              = $amap->_amap_index()          || {};
+    my $amap_topo_platform = $amap->aipAMAPRemDeviceType() || {};
+
+    my %amap_platform;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $pf_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$pf_key/ ) {
+            my $platform = $amap_topo_platform->{$pf_key};
+            next unless $platform;
+            $amap_platform{$key} = $platform;
+        }
+    }
+    return \%amap_platform;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::AMAP - SNMP Interface to Alcatel Mapping Adjacency Protocol (AMAP)
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ my $amap = new SNMP::Info ( 
+                             AutoSpecify => 1,
+                             Debug       => 1,
+                             DestHost    => 'router', 
+                             Community   => 'public',
+                             Version     => 2
+                           );
+
+ my $class = $amap->class();
+ print " Using device sub class : $class\n";
+
+ $hasamap   = $amap->hasAMAP() ? 'yes' : 'no';
+
+ # Print out a map of device ports with LLDP neighbors:
+ my $interfaces    = $amap->interfaces();
+ my $amap_if       = $amap->amap_if();
+ my $amap_ip       = $amap->amap_ip();
+ my $amap_port     = $amap->amap_port();
+
+ foreach my $amap_key (keys %$amap_ip){
+    my $iid           = $amap_if->{$amap_key};
+    my $port          = $interfaces->{$iid};
+    my $neighbor      = $amap_ip->{$amap_key};
+    my $neighbor_port = $amap_port->{$amap_key};
+    print "Port : $port connected to $neighbor / $neighbor_port\n";
+ }
+
+=head1 DESCRIPTION
+
+SNMP::Info::AMAP is a subclass of SNMP::Info that provides an object oriented 
+interface to Alcatel Mapping Adjacency Protocol (AMAP) information through
+SNMP.
+
+AMAP is a Layer 2 protocol that allows a network device to advertise its
+identity and capabilities on the local network providing topology information.
+
+Create or use a device subclass that inherits this class.  Do not use
+directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB>
+
+=back
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $amap->hasAMAP()
+
+Is AMAP is active in this device?  
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $amap->amap_id()
+
+Returns the string value used to identify the remote system.
+
+=item $amap->amap_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item  $amap->amap_ip()
+
+Returns remote IPv4 addresses.  Note: AMAP returns all IP addresses associated
+with the remote device.  It would be preferable to include only one address
+since they should all originate from the same device, but amap_ip() can not 
+determine if all addresses are reachable from the network management
+application therefore all addresses are returned and the calling application
+must determine which address to use and if they are in fact from the same
+device.
+
+=item $amap->amap_port()
+
+Returns remote port ID
+
+=item $amap->amap_platform()
+
+Returns remote platform ID
+
+=back
+
+=cut

Info/AdslLine.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'ADSL-LINE-MIB' => 'adslLineType' );
 
@@ -65,7 +65,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::AdslLine - SNMP Interface to the ADSL-LINE-MIB
+SNMP::Info::AdslLine - SNMP Interface to the F<ADSL-LINE-MIB>
 
 =head1 AUTHOR
 
@@ -120,7 +120,7 @@ MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
 =head2 ATUC channel table (C<adslAtucChanTable>)
 
 This table provides one row for each ATUC channel.
-ADSL channel interfaces are those ifEntries where ifType
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
 is equal to adslInterleave(124) or adslFast(125).
 
 =over
@@ -146,7 +146,7 @@ is equal to adslInterleave(124) or adslFast(125).
 =head2 ATUR channel table (C<adslAturChanTable>)
 
 This table provides one row for each ATUR channel.
-ADSL channel interfaces are those ifEntries where ifType
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
 is equal to adslInterleave(124) or adslFast(125).
 
 =over

Info/Aggregate.pm

@@ -1,6 +1,6 @@
-# $Id$
+# SNMP::Info::Aggregate
 #
-# Copyright (c) 2005 Matt Tuttle
+# Copyright (c) 2014 SNMP::Info Developers
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -27,88 +27,103 @@
 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 # POSSIBILITY OF SUCH DAMAGE.
 
-package SNMP::Info::CiscoImage;
+package SNMP::Info::Aggregate;
 
 use strict;
 use Exporter;
 use SNMP::Info;
 
-@SNMP::Info::CiscoImage::ISA       = qw/SNMP::Info Exporter/;
-@SNMP::Info::CiscoImage::EXPORT_OK = qw//;
+@SNMP::Info::Aggregate::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::Aggregate::EXPORT_OK = qw/agg_ports_ifstack/;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
-%MIBS = ( 'CISCO-IMAGE-MIB' => 'ciscoImageString', );
+%MIBS = (); # IF-MIB
 
 %GLOBALS = ();
 
-%FUNCS = ( 'ci_images' => 'ciscoImageString', );
+%FUNCS = ();
 
 %MUNGE = ();
 
+sub agg_ports_ifstack {
+  my $dev = shift;
+  my $partial = shift;
+
+  my $ifStack = $dev->ifStackStatus();
+  # TODO: if we want to do partial, we need to use inverse status
+  my $ifType = $dev->ifType();
+
+  my $ret = {};
+
+  foreach my $idx ( keys %$ifStack ) {
+      my ( $higher, $lower ) = split /\./, $idx;
+      next if ( $higher == 0 or $lower == 0 );
+      if ( $ifType->{ $higher } eq 'ieee8023adLag' ) {
+          $ret->{ $lower } = $higher;
+      }
+  }
+
+  return $ret;
+}
+
 1;
+
 __END__
 
 =head1 NAME
 
-SNMP::Info::CiscoImage - SNMP Interface to image strings for Cisco Devices
+SNMP::Info::Aggregate - SNMP Interface to ifStackTable Aggregated Links
 
 =head1 AUTHOR
 
-Matt Tuttle (C<mtuttle@americanhebrewacademy.org>)
+SNMP::Info Developers
 
 =head1 SYNOPSIS
 
- # Let SNMP::Info determine the correct subclass for you.
- my $ci = new SNMP::Info(
-                AutoSpecify => 1,
-                Debug       => 1,
-                # These arguments are passed directly on to SNMP::Session
-                DestHost    => 'myswitch',
-                Community   => 'public',
-                Version     => 2
-                )
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
     or die "Can't connect to DestHost.\n";
 
- my $class = $ci->class();
+ my $class = $info->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
 
-SNMP::Info::CiscoImage is a subclass of SNMP::Info that provides access to
-image strings embedded in an image running on Cisco Devices.
+This class provides access to Aggregated Links configuration on devices
+supporting C<ifStackTable>.
 
 Use or create in a subclass of SNMP::Info.  Do not use directly.
 
 =head2 Inherited Classes
 
-None.
+L<SNMP::Info>
 
 =head2 Required MIBs
 
 =over
 
-=item F<CISCO-IMAGE-MIB>
+=item F<IF-MIB>
 
 =back
 
-MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+=head1 METHODS
 
-=head1 GLOBALS
+=over 4
 
-None.
+=item C<agg_ports_ifstack>
 
-=head1 TABLE METHODS
-
-=over
-
-=item $ci->ci_images()
-
-Returns the table of image strings.
-
-C<ciscoImageString>
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
 
 =back
 

Info/Airespace.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -148,6 +148,16 @@ $VERSION = '2.11';
     # AIRESPACE-SWITCHING-MIB::agentPortConfigTable
     'airespace_duplex_admin' => 'agentPortPhysicalMode',
     'airespace_duplex'       => 'agentPortPhysicalStatus',
+
+    # This needs to be cleaned up, but for now we pretend to
+    # have the CISCO-DOT11-MIB for signal strengths, etc.
+    'cd11_sigstrength' => 'bsnMobileStationRSSI', # kinda
+    'cd11_sigqual'     => 'bsnMobileStationSnr',  # kinda
+    'cd11_rxbyte'      => 'bsnMobileStationBytesReceived',
+    'cd11_txbyte'      => 'bsnMobileStationBytesSent',
+    'cd11_rxpkt'       => 'bsnMobileStationPacketsReceived',
+    'cd11_txpkt'       => 'bsnMobileStationPacketsSent',
+    'cd11_ssid'        => 'bsnMobileStationSsid',
 );
 
 %MUNGE = (
@@ -158,6 +168,8 @@ $VERSION = '2.11';
     'airespace_bl_mac'      => \&SNMP::Info::munge_mac,
     'airespace_if_mac'      => \&SNMP::Info::munge_mac,
     'airespace_sta_mac'     => \&SNMP::Info::munge_mac,
+    'cd11_rxpkt'            => \&munge_64bits,
+    'cd11_txpkt'            => \&munge_64bits,
 );
 
 sub layers {
@@ -565,6 +577,13 @@ sub bp_index {
     return \%bp_index;
 }
 
+sub fw_mac {
+    my $airespace = shift;
+    my $partial   = shift;
+
+    return $airespace->SUPER::fw_mac($partial);
+}
+
 sub fw_port {
     my $airespace = shift;
     my $partial   = shift;
@@ -676,42 +695,52 @@ sub i_ssidmac {
     foreach my $oid ( keys %$ssidlist ) {
 
         my @parts    = split( /\./, $oid );
-        my $ssid_idx = pop (@parts);
-        my $slot     = pop (@parts);
-        my $last     = pop (@parts);
+        my $ssid_idx = pop(@parts);
+        my $slot     = pop(@parts);
+        my $last     = pop(@parts);
 
         my $iid = $oid;
+
         # Get radio band
         $iid =~ s/\.\d+$//;
         my $ap_type = $apif_type->{$iid};
+
         # Determine if IOS based
         $iid =~ s/\.\d+$//;
         my $ios = $ap_ios->{$iid} || '';
-        
-        # Four cases:
-        # IOS and 2.4Ghz count up, starts at zero
-        if ($ios and $ap_type =~ /b$/) {
-            $last = $last + ($ssid_idx - 1);
+
+        # 17 can be used as index for 3rd Party AP's.  We only have one
+        # hexadecimal digit to work with so skip if outside the range
+        if ( $ssid_idx > 0 and $ssid_idx < 17 ) {
+
+            # Four cases:
+            # IOS and 2.4Ghz count up, starts at zero
+            if ( $ios and $ap_type =~ /b$/ ) {
+                $last = $last + ( $ssid_idx - 1 );
+            }
+
+            # IOS and 5Ghz - count down from maximum of 16
+            elsif ( $ios and $ap_type =~ /a$/ ) {
+                $last = $last + ( 16 - $ssid_idx );
+            }
+
+            # VxWorks and 5Ghz - count up, starts at zero
+            elsif ( $ios and $ap_type =~ /a$/ ) {
+                $last = $last + ( $ssid_idx - 1 );
+            }
+
+            # VxWorks and 2.4Ghz - count down from maximum of 16
+            else {
+                $last = $last + ( 16 - $ssid_idx );
+            }
         }
-        # IOS and 5Ghz - count down from maximum of 16
-        elsif ($ios and $ap_type =~ /a$/) {
-            $last = $last + (16 - $ssid_idx);
-        }
-        # VxWorks and 5Ghz - count up, starts at zero
-        elsif ($ios and $ap_type =~ /a$/) {
-            $last = $last + ($ssid_idx - 1);
-        }
-        # VxWorks and 2.4Ghz - count down from maximum of 16
-        else {
-            $last = $last + (16 - $ssid_idx);
-        }
-        
-       push (@parts, $last);
-       my $bssid = join( ':', map { sprintf( "%02x", $_ ) } @parts );
-       $i_ssidmac{$oid} = $bssid;
+
+        push( @parts, $last );
+        my $bssid = join( ':', map { sprintf( "%02x", $_ ) } @parts );
+        $i_ssidmac{$oid} = $bssid;
     }
 
-   return \%i_ssidmac;
+    return \%i_ssidmac;
 }
 
 sub i_80211channel {
@@ -1031,6 +1060,13 @@ sub at_netaddr {
     return $ret;
 }
 
+sub munge_64bits {
+    # The controller sometimes hands off a ridiculous value for packets.
+    # Just truncate it to 32 bits.
+    my $value = shift;
+    return $value & 0xffffffff;
+}
+
 1;
 __END__
 
@@ -1080,7 +1116,7 @@ Do not use directly.
 
 =over
 
-None.
+=item None.
 
 =back
 
@@ -1206,12 +1242,9 @@ switch.
 
 =item $airespace->layers()
 
-Returns 00000011.  Class emulates Layer 2 functionality for Thin APs through
+Returns 00000111.  Class emulates Layer 2 functionality for Thin APs through
 proprietary MIBs.
 
-=item $airespace->at_netaddr()
-=item $airespace->at_paddr()
-
 =item $airespace->serial()
 
 (C<agentInventorySerialNumber>)
@@ -1238,7 +1271,7 @@ Returns reference to hash.  Indicates whether the SSID is broadcast.
 Returns reference to hash.  Current operating frequency channel of the radio
 interface.
 
-=item $dot11->dot11_cur_tx_pwr_mw()
+=item $airespace->dot11_cur_tx_pwr_mw()
 
 Returns reference to hash.  Current transmit power, in milliwatts, of the
 radio interface.
@@ -1659,15 +1692,15 @@ airespace_if_name() for virtual interfaces.
 
 =item $airespace->i_description()
 
-Returns reference to map of IIDs to interface types.  Returns C<ifDescr>
-for Ethernet interfaces, airespace_ap_loc() for thin AP interfaces, and
-airespace_if_name() for virtual interfaces.
+Returns reference to map of IIDs to interface descriptions.  Returns
+C<ifDescr> for Ethernet interfaces, airespace_ap_loc() for thin AP
+interfaces, and airespace_if_name() for virtual interfaces.
 
 =item $airespace->i_type()
 
-Returns reference to map of IIDs to interface descriptions.  Returns
-C<ifType> for Ethernet interfaces, airespace_apif_type() for thin AP
-interfaces, and airespace_if_type() for virtual interfaces.
+Returns reference to map of IIDs to interface types.  Returns C<ifType>
+for Ethernet interfaces, airespace_apif_type() for thin AP interfaces, and
+airespace_if_type() for virtual interfaces.
 
 =item $airespace->i_up()
 
@@ -1790,4 +1823,32 @@ entity which 'contains' this entity.
 
 =back
 
+=head2 Arp Cache Table Augmentation
+
+The controller has knowledge of MAC->IP mappings for wireless clients.
+Augmenting the arp cache data with these MAC->IP mappings enables visibility
+for stations that only communicate locally.
+
+=over
+
+=item $airespace->at_paddr()
+
+Adds MAC addresses extracted from the index of C<bsnMobileStationIpAddress>.
+
+=item $airespace->at_netaddr()
+
+Adds IP addresses from C<bsnMobileStationIpAddress>.
+
+=back
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item munge_64bits()
+
+Truncate packet values to 32 bits.
+
+=back
+
 =cut

Info/Bridge.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'BRIDGE-MIB'   => 'dot1dBaseBridgeAddress',
@@ -84,6 +84,17 @@ $VERSION = '2.11';
     'bs_to'     => 'dot1dStaticAllowedToGoTo',
     'bs_status' => 'dot1dStaticStatus',
 
+    # These leafs are not part of a table, but placed here
+    # to return a hash reference to ease API compatibility with
+    # MST and PVST implementations indexed by a spanning tree
+    # instance id
+    'stp_i_mac'       => 'dot1dBaseBridgeAddress',
+    'stp_i_time'      => 'dot1dStpTimeSinceTopologyChange',
+    'stp_i_ntop'      => 'dot1dStpTopChanges',
+    'stp_i_root'      => 'dot1dStpDesignatedRoot',
+    'stp_i_root_port' => 'dot1dStpRootPort',
+    'stp_i_priority'  => 'dot1dStpPriority',
+
     # Spanning Tree Protocol Table : dot1dStpPortTable
     'stp_p_id'       => 'dot1dStpPort',
     'stp_p_priority' => 'dot1dStpPortPriority',
@@ -125,15 +136,18 @@ $VERSION = '2.11';
     'b_mac'            => \&SNMP::Info::munge_mac,
     'fw_mac'           => \&SNMP::Info::munge_mac,
     'bs_mac'           => \&SNMP::Info::munge_mac,
-    'stp_root'         => \&SNMP::Info::munge_mac,
+    'stp_root'         => \&SNMP::Info::munge_prio_mac,
+    'stp_i_mac'        => \&SNMP::Info::munge_mac,
+    'stp_i_root'       => \&SNMP::Info::munge_prio_mac,
     'stp_p_root'       => \&SNMP::Info::munge_prio_mac,
     'stp_p_bridge'     => \&SNMP::Info::munge_prio_mac,
-    'stp_p_port'       => \&SNMP::Info::munge_prio_mac,
+    'stp_p_port'       => \&SNMP::Info::munge_prio_port,
     'qb_cv_egress'     => \&SNMP::Info::munge_port_list,
     'qb_cv_untagged'   => \&SNMP::Info::munge_port_list,
     'qb_v_egress'      => \&SNMP::Info::munge_port_list,
     'qb_v_fbdn_egress' => \&SNMP::Info::munge_port_list,
     'qb_v_untagged'    => \&SNMP::Info::munge_port_list,
+    'qb_cv_untagged'   => \&SNMP::Info::munge_port_list,
 
 );
 
@@ -158,6 +172,29 @@ sub qb_fw_mac {
     return $qb_fw_mac;
 }
 
+sub qb_fw_vlan {
+    my $bridge  = shift;
+    my $partial = shift;
+
+    my $qb_fw_port = $bridge->qb_fw_port($partial);
+    my $qb_fdb_ids = $bridge->qb_fdb_index() || {};
+
+
+    my $qb_fw_vlan = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _qb_fdbtable_index($idx);
+        # Many devices do not populate the dot1qVlanCurrentTable, so default
+        # to FDB ID = VID, but if we have a mapping use it.  
+        my $vlan = $fdb_id;
+        # defined as test since some devices have a vlan 0
+        if (defined $qb_fdb_ids->{$fdb_id}) {
+            $vlan = $qb_fdb_ids->{$fdb_id};
+        }
+        $qb_fw_vlan->{$idx} = $vlan;
+    }
+    return $qb_fw_vlan;
+}
+
 sub qb_i_vlan_t {
     my $bridge  = shift;
     my $partial = shift;
@@ -176,6 +213,54 @@ sub qb_i_vlan_t {
     return $i_vlan;
 }
 
+sub qb_fdb_index {
+    my $bridge  = shift;
+    my $partial = shift;
+
+    # Some devices may not implement TimeFilter in a standard manner
+    # appearing to loop on this request.  Override in the device class,
+    # see Enterasys for example.
+    my $qb_fdb_ids = $bridge->dot1qVlanFdbId() || {};
+
+    # Strip the TimeFilter
+    my $vl_fdb_index = {};
+    for my $orig (keys(%$qb_fdb_ids)) {
+        (my $new = $orig) =~ s/^\d+\.//;
+        $vl_fdb_index->{$new} = $qb_fdb_ids->{$orig};
+    }
+
+    return $vl_fdb_index;
+}
+
+# Most devices now support Q-BRIDGE-MIB, fall back to 
+# BRIDGE-MIB for those that don't.
+sub fw_mac {
+    my $bridge = shift;
+
+    my $qb = $bridge->qb_fw_mac();
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $bridge->SUPER::fw_mac();
+}
+
+sub fw_port {
+    my $bridge = shift;
+
+    my $qb = $bridge->qb_fw_port();
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $bridge->SUPER::fw_port();
+}
+
+sub fw_status {
+    my $bridge = shift;
+
+    my $qb = $bridge->qb_fw_status();
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+    
+    return $bridge->SUPER::fw_status();
+}
+
 sub i_stp_state {
     my $bridge  = shift;
     my $partial = shift;
@@ -295,24 +380,37 @@ sub i_vlan {
     return $i_vlan;
 }
 
+sub i_untagged { goto &i_vlan }
+
 sub i_vlan_membership {
     my $bridge  = shift;
     my $partial = shift;
 
-    my $index = $bridge->bp_index();
+    # Use VlanCurrentTable if available since it will include dynamic
+    # VLANs.  However, some devices do not populate the table.
+    my $v_ports = $bridge->qb_cv_egress() || $bridge->qb_v_egress();
+
+    return $bridge->_vlan_hoa($v_ports, $partial);
+}
+
+sub i_vlan_membership_untagged {
+    my $bridge  = shift;
+    my $partial = shift;
 
     # Use VlanCurrentTable if available since it will include dynamic
     # VLANs.  However, some devices do not populate the table.
+    my $v_ports = $bridge->qb_cv_untagged() || $bridge->qb_v_untagged();
 
-    # 11/07 - Todo: Issue with some devices trying to query VlanCurrentTable
-    # as table may grow very large with frequent VLAN changes.
-    # 06/08 - VlanCurrentTable may be due to timefilter, should query with
-    # zero partial for no time filter.
-    # my $v_ports = $bridge->qb_cv_egress() || $bridge->qb_v_egress();
+    return $bridge->_vlan_hoa($v_ports, $partial);
+}
 
-    my $v_ports = $bridge->qb_v_egress() || {};
+sub _vlan_hoa {
+    my $bridge = shift;
+    my ( $v_ports, $partial ) = @_;
 
-    my $i_vlan_membership = {};
+    my $index = $bridge->bp_index();
+
+    my $vlan_hoa = {};
     foreach my $idx ( keys %$v_ports ) {
         next unless ( defined $v_ports->{$idx} );
         my $portlist = $v_ports->{$idx};
@@ -332,10 +430,10 @@ sub i_vlan_membership {
             my $ifindex = $index->{$port};
             next unless ( defined($ifindex) );    # shouldn't happen
             next if ( defined $partial and $ifindex !~ /^$partial$/ );
-            push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
+            push( @{ $vlan_hoa->{$ifindex} }, $vlan );
         }
     }
-    return $i_vlan_membership;
+    return $vlan_hoa;
 }
 
 sub set_i_pvid {
@@ -352,6 +450,8 @@ sub set_i_vlan {
     return;
 }
 
+sub set_i_untagged { goto &set_i_vlan }
+
 sub set_add_i_vlan_tagged {
     my $bridge = shift;
 
@@ -584,6 +684,10 @@ to a hash.
 
 Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
+=item $vtp->i_untagged()
+
+An alias for C<i_vlan>.
+
 =item $bridge->i_vlan_membership()
 
 Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
@@ -599,11 +703,21 @@ IDs.  These are the VLANs which are members of the egress list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $bridge->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $bridge->qb_i_vlan_t()
 
 Returns reference to hash: key = C<dot1dBasePort>, value = either 'trunk' for
 tagged ports or the VLAN ID.
 
+=item $bridge->qb_fdb_index()
+
+Returns reference to hash: key = VLAN ID, value = FDB ID.
+
 =item $bridge->v_index()
 
 Returns VLAN IDs
@@ -657,6 +771,48 @@ to this port.
 
 =back
 
+=head2 Spanning Tree Instance Globals
+
+These are not part of a table, but return a hash reference to ease API
+compatibility with MST and PVST implementations indexed by a spanning tree
+instance id.
+
+=over
+
+=item $bridge->stp_i_time()
+
+Returns time since last topology change detected. (100ths/second)
+
+(C<dot1dStpTimeSinceTopologyChange>)
+
+=item $bridge->stp_i_time()
+
+Returns the total number of topology changes detected.
+
+(C<dot1dStpTopChanges>)
+
+=item $bridge->stp_i_root()
+
+Returns root of STP.
+
+(C<dot1dStpDesignatedRoot>)
+
+=item $bridge->stp_i_root_port()
+
+Returns the port number of the port that offers the lowest cost path
+to the root bridge.
+
+(C<dot1dStpRootPort>)
+
+=item $bridge->stp_i_priority()
+
+Returns the port number of the port that offers the lowest cost path
+to the root bridge.
+
+(C<dot1dStpPriority>)
+
+=back
+
 =head2 Spanning Tree Protocol Table (C<dot1dStpPortTable>)
 
 Descriptions are straight from F<BRIDGE-MIB.my>
@@ -855,6 +1011,10 @@ identifier (iid)
 
 (C<dot1qTpFdbPort>)
 
+=item $bridge->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
 =item $bridge->qb_fw_status()
 
 Returns reference to hash of forwarding table entries status
@@ -876,6 +1036,10 @@ operations.
 
 Currently unsupported.  Throws an error and returns.
 
+=item $bridge->set_i_untagged(vlan, ifIndex)
+
+An alias for C<set_i_vlan>.
+
 =item $bridge->set_i_pvid(pvid, ifIndex)
 
 Currently unsupported.  Throws an error and returns.
@@ -888,4 +1052,6 @@ Currently unsupported.  Throws an error and returns.
 
 Currently unsupported.  Throws an error and returns.
 
+=back
+
 =cut

Info/CDP.pm

@@ -40,9 +40,10 @@ use SNMP::Info;
 @SNMP::Info::CDP::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::CDP::EXPORT_OK = qw//;
 
-use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT/;
+use vars
+    qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT %CDP_CAPABILITIES/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # Five data structures required by SNMP::Info
 %MIBS = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' );
@@ -53,40 +54,53 @@ $VERSION = '2.11';
     'cdp_run'      => 'cdpGlobalRun',
     'cdp_interval' => 'cdpGlobalMessageInterval',
     'cdp_holdtime' => 'cdpGlobalHoldTime',
-    'cdp_id'       => 'cdpGlobalDeviceId',
+    'cdp_gid'       => 'cdpGlobalDeviceId',
 );
 
 %FUNCS = (
-    'c_index'        => 'cdpCacheIfIndex',
-    'c_proto'        => 'cdpCacheAddressType',
-    'c_addr'         => 'cdpCacheAddress',
-    'c_ver'          => 'cdpCacheVersion',
-    'c_id'           => 'cdpCacheDeviceId',
-    'c_port'         => 'cdpCacheDevicePort',
-    'c_platform'     => 'cdpCachePlatform',
-    'c_capabilities' => 'cdpCacheCapabilities',
-    'c_domain'       => 'cdpCacheVTPMgmtDomain',
-    'c_vlan'         => 'cdpCacheNativeVLAN',
-    'c_duplex'       => 'cdpCacheDuplex',
-    'c_power'        => 'cdpCachePowerConsumption',
-    'c_pri_mgmt_type'=> 'cdpCachePrimaryMgmtAddrType',
-    'c_pri_mgmt_addr'=> 'cdpCachePrimaryMgmtAddr',
-    'c_sec_mgmt_type'=> 'cdpCacheSecondaryMgmtAddrType',
-    'c_sec_mgmt_addr'=> 'cdpCacheSecondaryMgmtAddr',
+    'cdp_index'        => 'cdpCacheIfIndex',
+    'cdp_proto'        => 'cdpCacheAddressType',
+    'cdp_addr'         => 'cdpCacheAddress',
+    'cdp_ver'          => 'cdpCacheVersion',
+    'cdp_dev_id'       => 'cdpCacheDeviceId',
+    'cdp_port'         => 'cdpCacheDevicePort',
+    'cdp_platform'     => 'cdpCachePlatform',
+    'cdp_capabilities' => 'cdpCacheCapabilities',
+    'cdp_domain'       => 'cdpCacheVTPMgmtDomain',
+    'cdp_vlan'         => 'cdpCacheNativeVLAN',
+    'cdp_duplex'       => 'cdpCacheDuplex',
+    'cdp_power'        => 'cdpCachePowerConsumption',
+    'cdp_pri_mgmt_type'=> 'cdpCachePrimaryMgmtAddrType',
+    'cdp_pri_mgmt_addr'=> 'cdpCachePrimaryMgmtAddr',
+    'cdp_sec_mgmt_type'=> 'cdpCacheSecondaryMgmtAddrType',
+    'cdp_sec_mgmt_addr'=> 'cdpCacheSecondaryMgmtAddr',
 );
 
 %MUNGE = (
-    'c_capabilities' => \&SNMP::Info::munge_caps,
-    'c_platform'     => \&SNMP::Info::munge_null,
-    'c_domain'       => \&SNMP::Info::munge_null,
-    'c_port'         => \&SNMP::Info::munge_null,
-    'c_id'           => \&SNMP::Info::munge_null,
-    'c_ver'          => \&SNMP::Info::munge_null,
-    'c_ip'           => \&SNMP::Info::munge_ip,
-    'c_power'        => \&munge_power,
+    'cdp_capabilities' => \&SNMP::Info::munge_bits,
+    'cdp_platform'     => \&SNMP::Info::munge_null,
+    'cdp_domain'       => \&SNMP::Info::munge_null,
+    'cdp_port'         => \&SNMP::Info::munge_null,
+    'cdp_ver'          => \&SNMP::Info::munge_null,
+    'cdp_ip'           => \&SNMP::Info::munge_ip,
+    'cdp_power'        => \&munge_power,
 
 );
 
+%CDP_CAPABILITIES = (
+    'Router'                  => 0x001,
+    'Trans-Bridge'            => 0x002,
+    'Source-Route-Bridge'     => 0x004,
+    'Switch'                  => 0x008,
+    'Host'                    => 0x010,
+    'IGMP'                    => 0x020,
+    'Repeater'                => 0x040,
+    'VoIP-Phone'              => 0x080,
+    'Remotely-Managed-Device' => 0x100,
+    'Supports-STP-Dispute'    => 0x200,
+    'Two-port Mac Relay'      => 0x400,
+);
+
 sub munge_power {
     my $power = shift;
     my $decimal = substr( $power, -3 );
@@ -101,63 +115,114 @@ sub hasCDP {
 
     # SNMP v1 clients dont have the globals
     if ( defined $ver and $ver == 1 ) {
-        my $c_ip = $cdp->c_ip();
+        my $cdp_ip = $cdp->cdp_ip();
 
         # See if anything in cdp cache, if so we have cdp
-        return 1 if ( defined $c_ip and scalar( keys %$c_ip ) );
+        return 1 if ( defined $cdp_ip and scalar( keys %$cdp_ip ) );
         return;
     }
 
     return $cdp->cdp_run();
 }
 
-sub c_if {
+sub cdp_if {
     my $cdp = shift;
 
     # See if by some miracle Cisco implemented the cdpCacheIfIndex entry
-    my $c_index = $cdp->c_index();
-    return $c_index if defined $c_index;
+    my $cdp_index = $cdp->cdp_index();
+    return $cdp_index if defined $cdp_index;
 
     # Nope, didn't think so. Now we fake it.
-    my $c_ip = $cdp->c_ip();
-    unless ( defined $c_ip ) {
+    my $cdp_ip = $cdp->cdp_ip();
+    unless ( defined $cdp_ip ) {
         $cdp->error_throw(
-            "SNMP::Info::CDP:c_if() - Device doesn't have cdp_ip() data.  Can't fake cdp_index()"
+            "SNMP::Info::CDP:cdp_if() - Device doesn't have cdp_ip() data.  Can't fake cdp_index()"
         );
         return;
     }
 
-    my %c_if;
-    foreach my $key ( keys %$c_ip ) {
+    my %cdp_if;
+    foreach my $key ( keys %$cdp_ip ) {
         next unless defined $key;
         my $iid = $key;
 
         # Truncate .1 from cdp cache entry
         $iid =~ s/\.\d+$//;
-        $c_if{$key} = $iid;
+        $cdp_if{$key} = $iid;
     }
 
-    return \%c_if;
+    return \%cdp_if;
 }
 
-sub c_ip {
+sub cdp_ip {
     my $cdp     = shift;
     my $partial = shift;
 
-    my $c_addr  = $cdp->c_addr($partial)  || {};
-    my $c_proto = $cdp->c_proto($partial) || {};
+    my $cdp_addr  = $cdp->cdp_addr($partial)  || {};
+    my $cdp_proto = $cdp->cdp_proto($partial) || {};
 
-    my %c_ip;
-    foreach my $key ( keys %$c_addr ) {
-        my $addr  = $c_addr->{$key};
-        my $proto = $c_proto->{$key};
+    my %cdp_ip;
+    foreach my $key ( keys %$cdp_addr ) {
+        my $addr  = $cdp_addr->{$key};
+        my $proto = $cdp_proto->{$key};
         next unless defined $addr;
         next if ( defined $proto and $proto ne 'ip' );
 
         my $ip = join( '.', unpack( 'C4', $addr ) );
-        $c_ip{$key} = $ip;
+        $cdp_ip{$key} = $ip;
     }
-    return \%c_ip;
+    return \%cdp_ip;
+}
+
+sub cdp_cap {
+    my $cdp     = shift;
+    my $partial = shift;
+
+    # Some devices return a hex-string, others return a space separated
+    # string, we need the raw data to determine return value and
+    # take appropriate action
+    my $cdp_caps = $cdp->cdp_capabilities_raw($partial) || {};
+
+    my %cdp_cap;
+    foreach my $key ( keys %$cdp_caps ) {
+        my $cap_raw = $cdp_caps->{$key};
+        next unless $cap_raw;
+
+        # Simple check, smallest single string is either Host or IGMP with a
+        # space added on the end for a length of 5, hex string is normally
+        # 4 bytes, but since only one byte was traditionally needed process
+        # as hex for a length of 4 or less
+        if ( length $cap_raw < 5 ) {
+            my $cap_hex = join( '',
+                map { sprintf "%x", $_ } unpack( 'C*', $cap_raw ) );
+            foreach my $capability ( keys %CDP_CAPABILITIES ) {
+                if ( ( hex $cap_hex ) & $CDP_CAPABILITIES{$capability} ) {
+                    push( @{ $cdp_cap{$key} }, $capability );
+                }
+            }
+        }
+        else {
+            my @caps = split /\s/, $cap_raw;
+            push( @{ $cdp_cap{$key} }, @caps );
+        }
+    }
+    return \%cdp_cap;
+}
+
+sub cdp_id {
+    my $cdp    = shift;
+    my $partial = shift;
+
+    my $ch = $cdp->cdp_dev_id($partial) || {};
+
+    my %cdp_id;
+    foreach my $key ( sort keys %$ch ) {
+        my $id = $ch->{$key};
+        next unless $id;
+        $id = SNMP::Info::munge_mac($id) || SNMP::Info::munge_null($id);
+        $cdp_id{$key} = $id;
+    }
+    return \%cdp_id;
 }
 
 1;
@@ -188,15 +253,15 @@ Max Baker
 
  # Print out a map of device ports with CDP neighbors:
  my $interfaces = $cdp->interfaces();
- my $c_if       = $cdp->c_if();
- my $c_ip       = $cdp->c_ip();
- my $c_port     = $cdp->c_port();
+ my $cdp_if       = $cdp->cdp_if();
+ my $cdp_ip       = $cdp->cdp_ip();
+ my $cdp_port     = $cdp->cdp_port();
 
- foreach my $cdp_key (keys %$c_ip){
-    my $iid           = $c_if->{$cdp_key};
+ foreach my $cdp_key (keys %$cdp_ip){
+    my $iid           = $cdp_if->{$cdp_key};
     my $port          = $interfaces->{$iid};
-    my $neighbor      = $c_ip->{$cdp_key};
-    my $neighbor_port = $c_port->{$cdp_key};
+    my $neighbor      = $cdp_ip->{$cdp_key};
+    my $neighbor_port = $cdp_port->{$cdp_key};
     print "Port : $port connected to $neighbor / $neighbor_port\n";
  }
 
@@ -260,7 +325,7 @@ Time in seconds that CDP messages are kept.
 
 (C<cdpGlobalHoldTime>)
 
-=item  $cdp->cdp_id() 
+=item  $cdp->cdp_gid() 
 
 Returns CDP device ID.  
 
@@ -280,153 +345,170 @@ to a hash.
 
 =over
 
-=item $cdp->c_capabilities()
+=item $cdp->cdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
-binary string, 7 digits long, MSB.  Each digit represents a bit from the
-table below.
-
-From L<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#18843>:
+binary string, MSB.  Each digit represents a bit from the table below from 
+the CDP Capabilities Mapping to Smartport Type table within the
+Cisco Small Business 200 Series Smart Switch Administration Guide, 
+L<http://www.cisco.com/c/en/us/support/switches/small-business-200-series-smart-switches/products-maintenance-guides-list.html>:
 
 (Bit) - Description
 
 =over
 
-=item (0x40) - Provides level 1 functionality.
+=item (0x400) - Two-Port MAC Relay.
 
-=item (0x20) - The bridge or switch does not forward IGMP Report packets on
+=item (0x200) - CAST Phone Port / CVTA / Supports-STP-Dispute depending
+                upon platform.
+
+=item (0x100) - Remotely-Managed Device.
+
+=item (0x80)  - VoIP Phone.
+
+=item (0x40)  - Provides level 1 functionality.
+
+=item (0x20)  - The bridge or switch does not forward IGMP Report packets on
 non router ports.
 
-=item (0x10) - Sends and receives packets for at least one network layer
+=item (0x10)  - Sends and receives packets for at least one network layer
 protocol. If the device is routing the protocol, this bit should not be set.
 
-=item (0x08) - Performs level 2 switching. The difference between this bit
+=item (0x08)  - Performs level 2 switching. The difference between this bit
 and bit 0x02 is that a switch does not run the Spanning-Tree Protocol. This
 device is assumed to be deployed in a physical loop-free topology.
 
-=item (0x04) - Performs level 2 source-route bridging. A source-route bridge
+=item (0x04)  - Performs level 2 source-route bridging. A source-route bridge
 would set both this bit and bit 0x02.
 
-=item (0x02) - Performs level 2 transparent bridging.
+=item (0x02)  - Performs level 2 transparent bridging.
 
-=item (0x01) - Performs level 3 routing for at least one network layer
+=item (0x01)  - Performs level 3 routing for at least one network layer
 protocol.
 
 =back
 
-Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to this
-information.
+Thanks to Martin Lorensen for a pointer to the original information and
+CPAN user Alex for updates.
 
 (C<cdpCacheCapabilities>)
 
-=item $cdp->c_domain()
+=item $cdp->cdp_domain()
 
 Returns remote VTP Management Domain as defined in
 C<CISCO-VTP-MIB::managementDomainName>
 
 (C<cdpCacheVTPMgmtDomain>)
 
-=item $cdp->c_duplex() 
+=item $cdp->cdp_duplex() 
 
 Returns the port duplex status from remote devices.
 
 (C<cdpCacheDuplex>)
 
-=item $cdp->c_id()
+=item $cdp->cdp_id()
 
 Returns remote device id string
 
 (C<cdpCacheDeviceId>)
 
-=item $cdp->c_if()
+=item $cdp->cdp_if()
 
 Returns the mapping to the SNMP Interface Table.
 
-Note that a lot devices don't implement $cdp->c_index(),  So if it isn't
+Note that a lot devices don't implement $cdp->cdp_index(),  So if it isn't
 around, we fake it. 
 
 In order to map the cdp table entry back to the interfaces() entry, we
 truncate the last number off of it :
 
   # it exists, yay.
-  my $c_index     = $device->c_index();
-  return $c_index if defined $c_index;
+  my $cdp_index     = $device->cdp_index();
+  return $cdp_index if defined $cdp_index;
 
   # if not, let's fake it
-  my $c_ip       = $device->c_ip();
+  my $cdp_ip       = $device->cdp_ip();
     
-  my %c_if
-  foreach my $key (keys %$c_ip){
+  my %cdp_if
+  foreach my $key (keys %$cdp_ip){
       $iid = $key;
       ## Truncate off .1 from cdp response
       $iid =~ s/\.\d+$//;
-      $c_if{$key} = $iid;
+      $cdp_if{$key} = $iid;
   }
  
-  return \%c_if;
+  return \%cdp_if;
 
 
-=item $cdp->c_index()
+=item $cdp->cdp_index()
 
 Returns the mapping to the SNMP2 Interface table for CDP Cache Entries. 
 
-Most devices don't implement this, so you probably want to use $cdp->c_if()
+Most devices don't implement this, so you probably want to use $cdp->cdp_if()
 instead.
 
-See c_if() entry.
+See cdp_if() entry.
 
 (C<cdpCacheIfIndex>)
 
-=item  $cdp->c_ip()
+=item  $cdp->cdp_ip()
 
-If $cdp->c_proto() is supported, returns remote IPV4 address only.  Otherwise
+If $cdp->cdp_proto() is supported, returns remote IPV4 address only.  Otherwise
 it will return all addresses.
 
 (C<cdpCacheAddress>)
 
-=item  $cdp->c_addr()
+=item  $cdp->cdp_addr()
 
 Returns remote address
 
 (C<cdpCacheAddress>)
 
-=item $cdp->c_platform() 
+=item $cdp->cdp_platform() 
 
 Returns remote platform id 
 
 (C<cdpCachePlatform>)
 
-=item $cdp->c_port()
+=item $cdp->cdp_port()
 
 Returns remote port ID
 
 (C<cdpDevicePort>)
 
-=item  $cdp->c_proto()
+=item  $cdp->cdp_proto()
 
 Returns remote address type received.  Usually IP.
 
 (C<cdpCacheAddressType>)
 
-=item $cdp->c_ver() 
+=item $cdp->cdp_ver() 
 
 Returns remote hardware version
 
 (C<cdpCacheVersion>)
 
-=item $cdp->c_vlan()
+=item $cdp->cdp_vlan()
 
 Returns the remote interface native VLAN.
 
 (C<cdpCacheNativeVLAN>)
 
-=item $cdp->c_power()
+=item $cdp->cdp_power()
 
 Returns the amount of power consumed by remote device in milliwatts munged
 for decimal placement.
 
 (C<cdpCachePowerConsumption>)
 
+=item  $cdp->cdp_cap() 
+
+Returns hash of arrays with each array containing the system capabilities
+supported by the remote system.  Possible elements in the array are
+C<Router>, C<Trans-Bridge>, C<Source-Route-Bridge>, C<Switch>, C<Host>,
+C<IGMP>, C<Repeater>, C<VoIP-Phone>, C<Remotely-Managed-Device>,
+C<Supports-STP-Dispute>, and C<Two-port Mac Relay>.
+
 =back
 
 =head1 Data Munging Callback Subroutines

Info/CiscoAgg.pm

@@ -0,0 +1,150 @@
+# SNMP::Info::CiscoAgg
+#
+# Copyright (c) 2014 SNMP::Info Developers
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoAgg;
+
+use strict;
+use Exporter;
+use SNMP::Info::IEEE802dot3ad 'agg_ports_lag';
+
+@SNMP::Info::CiscoAgg::ISA = qw/
+  SNMP::Info::IEEE802dot3ad
+  Exporter
+/;
+@SNMP::Info::CiscoAgg::EXPORT_OK = qw/
+  agg_ports
+/;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+  %SNMP::Info::IEEE802dot3ad::MIBS,
+  'CISCO-PAGP-MIB'   => 'pagpGroupIfIndex',
+);
+
+%GLOBALS = ();
+
+%FUNCS = ();
+
+%MUNGE = ();
+
+sub agg_ports_pagp {
+  my $dev = shift;
+
+  # Note that this mapping will miss any interfaces that are down during
+  # polling. If one of the members is up, we could use
+  # pagpAdminGroupCapability to figure things out, but if they're all
+  # down, we're hosed. Since we could be hosed anyway, we skip the fancy
+  # stuff.
+  my $mapping = {};
+  my $group = $dev->pagpGroupIfIndex;
+  for my $slave (keys %$group) {
+    my $master = $group->{$slave};
+    next if($master == 0 || $slave == $master);
+
+    $mapping->{$slave} = $master;
+  }
+
+  return $mapping;
+}
+
+# until we have PAgP data and need to combine with LAG data
+sub agg_ports {
+  my $ret = {%{agg_ports_pagp(@_)}, %{agg_ports_lag(@_)}};
+  return $ret;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoAgg - SNMP Interface to Cisco Aggregated Links
+
+=head1 AUTHOR
+
+SNMP::Info Developers
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $info->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+This class provides access to Aggregated Links configuration on Cisco devices.
+It combines Cisco PAgP and IEEE 802.3ad information.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+L<SNMP::Info::IEEE802dot3ad>
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-PAGP-MIB>
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 METHODS
+
+=over 4
+
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
+=item C<agg_ports_pagp>
+
+Implements the PAgP LAG info retrieval. Merged into C<agg_ports> data
+automatically.
+
+=back
+
+=cut

Info/CiscoConfig.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'CISCO-CONFIG-COPY-MIB' => 'ccCopyTable',

Info/CiscoPortSecurity.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PAECAPABILITIES/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'CISCO-PORT-SECURITY-MIB' => 'ciscoPortSecurityMIB',

Info/CiscoPower.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'CISCO-POWER-ETHERNET-EXT-MIB' => 'cpeExtPsePortEntPhyIndex',
           'CISCO-CDP-MIB' => 'cdpCachePowerConsumption' );
@@ -175,7 +175,7 @@ Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 =item $poe->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("cpeExtPsePortPwrConsumption")
+(C<cpeExtPsePortPwrConsumption>)
  
 =back
 
@@ -185,8 +185,8 @@ Power supplied by PoE ports, in milliwatts
 
 =item $poe->peth_port_neg_power()
 
-Power negotiated using CDP, in milliwats
-("cdpCachePowerConsumption")
+Power negotiated using CDP, in milliwatts
+(C<cdpCachePowerConsumption>)
 
 =back
 

Info/CiscoQOS.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'CISCO-CLASS-BASED-QOS-MIB' => 'cbQosIfIndex', );
 

Info/CiscoRTT.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'CISCO-RTTMON-MIB' => 'rttMonCtrlAdminOwner', );
 

Info/CiscoStack.pm

@@ -32,14 +32,13 @@ package SNMP::Info::CiscoStack;
 
 use strict;
 use Exporter;
-use SNMP::Info;
 
-@SNMP::Info::CiscoStack::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoStack::ISA       = qw/Exporter/;
 @SNMP::Info::CiscoStack::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'CISCO-STACK-MIB' => 'ciscoStackMIB', );
 
@@ -215,9 +214,8 @@ sub i_speed_admin {
     my $partial = shift;
 
     my %i_speed_admin;
-    my $p_port  = $stack->p_port() || {};
-    my %mapping = reverse %$p_port;
-    my $p_speed = $stack->p_speed( $mapping{$partial} );
+    my $p_port  = $stack->p_port()  || {};
+    my $p_speed = $stack->p_speed() || {};
 
     my %speeds = (
         'autoDetect'      => 'auto',

Info/CiscoStats.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'SNMPv2-MIB'            => 'sysDescr',
@@ -51,6 +51,7 @@ $VERSION = '2.11';
     'OLD-CISCO-SYSTEM-MIB'  => 'writeMem',
     'CISCO-PRODUCTS-MIB'    => 'sysName',
     'ENTITY-MIB'            => 'entPhysicalSoftwareRev',
+    'CISCO-IMAGE-MIB'       => 'ciscoImageString',
 
     # some older catalysts live here
     'CISCO-STACK-MIB'                 => 'wsc1900sysID',
@@ -87,6 +88,9 @@ $VERSION = '2.11';
 
     # CISCO-FLASH-MIB::ciscoFlashDeviceTable
     'cisco_flash_size' => 'ciscoFlashDeviceSize',
+    
+    # CISCO-IMAGE-MIB
+    'ci_images' => 'ciscoImageString',
 );
 
 %MUNGE = ();
@@ -100,13 +104,16 @@ sub os {
     my $descr = $l2->description() || '';
 
     # order here matters - there are Catalysts that run IOS and have catalyst
-    # in their description field.
+    # in their description field, as well as Catalysts that run IOS-XE.
+    return 'ios-xe'   if ( $descr =~ /IOS-XE/ );
+    return 'ios-xr'   if ( $descr =~ /IOS XR/ );
     return 'ios'      if ( $descr =~ /IOS/ );
     return 'catalyst' if ( $descr =~ /catalyst/i );
     return 'css'      if ( $descr =~ /Content Switch SW/ );
     return 'css-sca'  if ( $descr =~ /Cisco Systems Inc CSS-SCA-/ );
     return 'pix'      if ( $descr =~ /Cisco PIX Security Appliance/ );
     return 'asa'      if ( $descr =~ /Cisco Adaptive Security Appliance/ );
+    return 'san-os'   if ( $descr =~ /Cisco SAN-OS/ );
 
     if ( $descr =~ /Application Control Engine Service Module/ ) {
         # Only the admin context implements the entity MIB
@@ -195,6 +202,13 @@ sub os_ver {
         return $1;
     }
 
+    if ( defined $os
+        and $os eq 'ios-xr'
+        and defined $descr
+        and $descr =~ m/Version (\d+[\.\d]+)/ )
+    {
+        return $1;
+    }
 
     # Newer Catalysts and IOS devices
     if ( defined $descr
@@ -203,6 +217,15 @@ sub os_ver {
         return $1;
     }
 
+    # Generic fallback: try to determine running image from CISCO-IMAGE-MIB
+    my $image_info = $l2->ciscoImageString() || {};
+    foreach my $row (keys %$image_info) {
+        my $info_string = $image_info->{$row};
+        if ($info_string =~ /CW_VERSION\$([^\$]+)\$/) {
+            return $1;
+        }
+    }
+
     return;
 }
 
@@ -358,6 +381,8 @@ None.
 
 =item F<ENTITY-MIB>
 
+=item F<CISCO-IMAGE-MIB>
+
 =back
 
 MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
@@ -388,58 +413,35 @@ Returns mem_free() + mem_used()
 
 =item $ciscostats->os()
 
-Tries to parse if device is running IOS or CatOS from description()
+Tries to parse if device is running 'IOS', 'CatOS', 'IOS-XE' or something else
+from description()
 
-Available values :
+Available values:
 
-=over
-
-=item pix
-
-Cisco PIX
-
-=item asa
-
-Cisco ASA
-
-=item fwsm
-
-Single-mode FWSM
-
-=item fwsm-admin
-
-Admin context of multi-context FWSM
-
-=item fwsm-context
-
-Standard context of multi-context FWSM
-
-=item ace-admin
-
-Admin context of ACE module
-
-=item ace-context
-
-Standard context of ACE module (NB: No OS version detection
-is available, but will be the same as it's 'ace admin')
-
-=item css
-
-Cisco Content Switch
-
-=item css-sca
-
-Cisco Content Switch Secure Content Acceleration
-
-=back
+ 'ios'          for Cisco IOS
+ 'ios-xe'       for Cisco IOS XE
+ 'ios-xr'       for Cisco IOS XR
+ 'pix'          for Cisco PIX
+ 'asa'          for Cisco ASA
+ 'fwsm'         for Single-mode FWSM
+ 'fwsm-admin'   for Admin context of multi-context FWSM
+ 'fwsm-context' for Standard context of multi-context FWSM
+ 'ace-admin'    for Admin context of ACE module
+ 'ace-context'  for Standard context of ACE module (NB: No OS version
+                     detection is available, but will be the same as it's
+                     'ace admin')
+ 'css'          for Cisco Content Switch
+ 'css-sca'      for Cisco Content Switch Secure Content Acceleration
+ 'san-os'       for Cisco SAN-OS
 
 =item $ciscostats->os_ver()
 
-Tries to parse device operating system version from description()
+Tries to parse device operating system version from description(), falls back
+to parsing C<CISCO-IMAGE-MIB::ciscoImageString> if needed
 
 =item $ciscostats->os_bin()
 
-Tries to parse ROMMON version from rom_id() string
+Tries to parse C<ROMMON> version from rom_id() string
 
 =item $ciscostats->ios_cpu()
 
@@ -540,4 +542,16 @@ zero if the device has been removed.
 
 =back
 
+=head2 Cisco Image Table (C<ciscoImageTable>)
+
+=over
+
+=item $ci->ci_images()
+
+Returns the table of image strings.
+
+C<ciscoImageString>
+
+=back
+
 =cut

Info/CiscoStpExtensions.pm

@@ -35,7 +35,9 @@ use SNMP::Info;
 use SNMP::Info::Bridge;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/;
-$VERSION = '2.11';
+
+$VERSION = '3.21_001';
+
 @SNMP::Info::CiscoStpExtensions::ISA = qw/SNMP::Info::Bridge SNMP::Info Exporter/;
 @SNMP::Info::CiscoStpExtensions::EXPORT_OK = qw//;
 
@@ -75,7 +77,7 @@ $VERSION = '2.11';
 sub stp_ver {
      my $self = shift;
      my $stp_ver = $self->SUPER::stp_ver();
-     if ( $stp_ver eq 'unknown' ){
+     if ( !defined($stp_ver) || $stp_ver eq 'unknown' ){
          if ( defined $self->stpx_stp_type() ){
              $stp_ver = $self->stpx_stp_type();
          }

Info/CiscoVTP.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'CISCO-VTP-MIB'                       => 'vtpVlanName',
@@ -149,6 +149,7 @@ sub i_vlan {
 
     my $port_vlan      = $vtp->vtp_trunk_native($partial)   || {};
     my $i_vlan         = $vtp->i_vlan2($partial)            || {};
+    my $trunk_dyn      = $vtp->vtp_trunk_dyn($partial)      || {};
     my $trunk_dyn_stat = $vtp->vtp_trunk_dyn_stat($partial) || {};
 
     my %i_vlans;
@@ -165,15 +166,23 @@ sub i_vlan {
     foreach my $port ( keys %$port_vlan ) {
         my $vlan = $port_vlan->{$port};
         next unless defined $vlan;
+
+        # ports up and trunking should have a trunking status
         my $stat = $trunk_dyn_stat->{$port};
-        if ( defined $stat and $stat =~ /^trunking/ ) {
+
+        # vtp_trunk_dyn_stat is not useful for down ports
+        # so we use vtp_trunk_dyn to see if trunking is set
+        my $dyn = $trunk_dyn->{$port};
+        
+        if (($stat and $stat =~ /^trunking/ )
+            or ($dyn and (($dyn eq 'on') or ($dyn eq 'onNoNegotiate'))))
+        {
             $i_vlans{$port} = $vlan;
         }
     }
 
     # Check in CISCO-VLAN-IFTABLE-RELATION-MIB
-    # Is this only for Aironet???  If so, it needs
-    # to be removed from this class
+    # Used for traditional Cisco Routers and Aironet
 
     my $v_cvi_if = $vtp->v_cvi_if();
     if ( defined $v_cvi_if ) {
@@ -191,6 +200,22 @@ sub i_vlan {
     return \%i_vlans;
 }
 
+sub i_untagged {
+    my $vtp = shift;
+    my ( $ifindex ) = @_;
+
+    # cannot defer to i_vlan - vtp_trunk_dyn_stat is not useful for down ports
+    # so we use vtp_trunk_dyn as a hint to use i_pvid
+
+    my $trunking = eval { $vtp->vtp_trunk_dyn($ifindex)->{$ifindex} };
+    if ($trunking and (($trunking eq 'on') or ($trunking eq 'onNoNegotiate'))) {
+        return $vtp->i_pvid(@_);
+    }
+    else {
+        return $vtp->i_vlan(@_);
+    }
+}
+
 sub i_vlan_membership {
     my $vtp     = shift;
     my $partial = shift;
@@ -202,6 +227,7 @@ sub i_vlan_membership {
     my $vtp_vlans      = $vtp->v_state();
     my $i_vlan         = $vtp->i_vlan2($partial)            || {};
     my $trunk_dyn_stat = $vtp->vtp_trunk_dyn_stat($partial) || {};
+    my $trunk_dyn      = $vtp->vtp_trunk_dyn($partial)      || {};
 
     my $i_vlan_membership = {};
 
@@ -233,7 +259,9 @@ sub i_vlan_membership {
 
     foreach my $port ( keys %$ports_vlans ) {
         my $stat = $trunk_dyn_stat->{$port};
-        if ( defined $stat and $stat =~ /^trunking/ ) {
+        my $dyn = $trunk_dyn->{$port};
+        if (($stat and $stat =~ /^trunking/ )
+            or ($dyn and (($dyn eq 'on') or ($dyn eq 'onNoNegotiate')))) {
             my $k     = 0;
             my $list1 = $ports_vlans->{$port} || '0';
             my $list2 = $ports_vlans_2k->{$port} || '0';
@@ -255,6 +283,20 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $vtp  = shift;
+    my $partial = shift;
+
+    my $vlans = $vtp->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    
+    return $i_vlan_membership;
+}
+
 sub set_i_pvid {
     my $vtp = shift;
     my ( $vlan_id, $ifindex ) = @_;
@@ -306,6 +348,22 @@ sub set_i_vlan {
     return;
 }
 
+sub set_i_untagged {
+    my $vtp = shift;
+    my ( $vlan_id, $ifindex ) = @_;
+
+    # cannot defer to i_vlan - vtp_trunk_dyn_stat is not useful for down ports
+    # so we use vtp_trunk_dyn as a hint to use i_pvid
+
+    my $trunking = eval { $vtp->vtp_trunk_dyn($ifindex)->{$ifindex} };
+    if ($trunking and (($trunking eq 'on') or ($trunking eq 'onNoNegotiate'))) {
+        return $vtp->set_i_pvid(@_);
+    }
+    else {
+        return $vtp->set_i_vlan(@_);
+    }
+}
+
 sub set_add_i_vlan_tagged {
     my $vtp = shift;
     my ( $vlan_id, $ifindex ) = @_;
@@ -540,6 +598,10 @@ Your device will only implement a subset of these methods.
 Returns a mapping between C<ifIndex> and assigned VLAN ID for access ports
 and the default VLAN ID for trunk ports.
 
+=item $vtp->i_untagged()
+
+An alias for C<i_vlan>.
+
 =item $vtp->i_vlan_membership()
 
 Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
@@ -555,6 +617,12 @@ IDs.  These are the VLANs which are members of enabled VLAN list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $vtp->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =back
 
 =head2 VLAN Table (C<CISCO-VTP-MIB::vtpVlanTable>)
@@ -835,6 +903,12 @@ port C<ifIndex>.  This method should only be used on trunk ports.
   $vtp->set_i_pvid('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't change port default VLAN. ",$vtp->error(1);
 
+=item $vtp->set_i_untagged ( vlan, ifIndex )
+
+This method attempts to work out whether the port referenced by ifIndex is
+trunking, and if so will return the value of C<set_i_pvid>. Otherwise, the
+value of C<set_i_vlan> is returned.
+
 =item $vtp->set_add_i_vlan_tagged ( vlan, ifIndex )
 
 Adds the VLAN to the enabled VLANs list of the port, must be supplied with the

Info/EDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'EXTREME-EDP-MIB'   => 'extremeEdpPortIfIndex',

Info/Entity.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'ENTITY-MIB' => 'entPhysicalSerialNum' );
 
@@ -138,7 +138,7 @@ Max Baker
 
 =head1 DESCRIPTION
 
-F<ENTITY-MIB> is used by Layer 2 devices from HP, Aironet, Foundry, Cisco,
+F<ENTITY-MIB> is used by Layer 2 devices from Brocade, Cisco, HP,
 and more.
 
 See RFC 2737 for full details.

Info/EtherLike.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'EtherLike-MIB' => 'etherMIB' );
 

Info/FDP.pm

@@ -42,18 +42,11 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' );
 
 %GLOBALS = (
-
-    # CDP-Compatibility
-    'cdp_interval' => 'snFdpGlobalMessageInterval',
-    'cdp_holdtime' => 'snFdpGlobalHoldTime',
-    'cdp_id'       => 'snFdpGlobalDeviceId',
-
-    #
     'fdp_run'      => 'snFdpGlobalRun',
     'fdp_interval' => 'snFdpGlobalMessageInterval',
     'fdp_holdtime' => 'snFdpGlobalHoldTime',
@@ -61,27 +54,27 @@ $VERSION = '2.11';
 );
 
 %FUNCS = (
-    'c_index'        => 'snFdpCacheIfIndex',
-    'c_proto'        => 'snFdpCacheAddressType',
-    'c_ip'           => 'snFdpCacheAddress',
-    'c_ver'          => 'snFdpCacheVersion',
-    'c_id'           => 'snFdpCacheDeviceId',
-    'c_port'         => 'snFdpCacheDevicePort',
-    'c_platform'     => 'snFdpCachePlatform',
-    'c_capabilities' => 'snFdpCacheCapabilities',
-    'c_domain'       => 'snFdpCacheVTPMgmtDomain',
-    'c_vlan'         => 'snFdpCacheNativeVLAN',
-    'c_duplex'       => 'snFdpCacheDuplex',
+    'fdp_index'        => 'snFdpCacheIfIndex',
+    'fdp_proto'        => 'snFdpCacheAddressType',
+    'fdp_ip'           => 'snFdpCacheAddress',
+    'fdp_ver'          => 'snFdpCacheVersion',
+    'fdp_id'           => 'snFdpCacheDeviceId',
+    'fdp_port'         => 'snFdpCacheDevicePort',
+    'fdp_platform'     => 'snFdpCachePlatform',
+    'fdp_capabilities' => 'snFdpCacheCapabilities',
+    'fdp_domain'       => 'snFdpCacheVTPMgmtDomain',
+    'fdp_vlan'         => 'snFdpCacheNativeVLAN',
+    'fdp_duplex'       => 'snFdpCacheDuplex',
 );
 
 %MUNGE = (
-    'c_capabilities' => \&SNMP::Info::munge_caps,
-    'c_ip'           => \&SNMP::Info::munge_ip
+    'fdp_capabilities' => \&SNMP::Info::munge_bits,
+    'fdp_ip'           => \&SNMP::Info::munge_ip
 );
 
-sub cdp_run {
+sub fdp_run {
     my $fdp     = shift;
-    my $fdp_run = $fdp->fdp_run();
+    my $fdp_run = $fdp->orig_fdp_run();
 
     # if fdp_run isn't implemented on device, assume FDP is on
     return $fdp_run if defined $fdp_run;
@@ -107,7 +100,7 @@ sub hasFDP {
     return $fdp->fdp_run();
 }
 
-sub c_if {
+sub fdp_if {
     my $fdp = shift;
 
     # See if by some miracle Cisco implemented the fdpCacheIfIndex entry
@@ -115,7 +108,7 @@ sub c_if {
     return $fdp_index if defined $fdp_index;
 
     # Nope, didn't think so. Now we fake it.
-    my $fdp_ip = $fdp->c_ip();
+    my $fdp_ip = $fdp->fdp_ip();
     unless ( defined $fdp_ip ) {
         $fdp->error_throw(
             "SNMP::Info::FDP:fdp_if() - Device doesn't have fdp_ip() data.  Can't fake fdp_index()"
@@ -185,8 +178,7 @@ interface to FDP information through SNMP.
 FDP is a Layer 2 protocol that supplies topology information of
 devices that also speak FDP, mostly switches and routers.  It has
 similar functionality to Cisco's CDP, and the SNMP interface is
-virtually identical.  FDP is implemented in Foundry devices, including
-the Bigiron and Fastiron range.
+virtually identical.  FDP is implemented in Brocade (Foundry) devices.
 
 Create or use a device subclass that inherits this class.  Do not use
 directly.
@@ -256,19 +248,19 @@ CDP compatibility
 
 =over
 
-=item $fdp->c_interval()
+=item $fdp->fdp_interval()
 
 Interval in seconds at which FDP messages are generated.
 
 (C<fdpGlobalMessageInterval>)
 
-=item $fdp->c_holdtime()
+=item $fdp->fdp_holdtime()
 
 Time in seconds that FDP messages are kept. 
 
 (C<fdpGlobalHoldTime>)
 
-=item  $fdp->c_id() 
+=item  $fdp->fdp_id() 
 
 Returns FDP device ID.  
 
@@ -277,7 +269,7 @@ retrieved from remote devices with $fdp->id().
 
 (C<fdpGlobalDeviceId>)
 
-=item $cdp->cdp_run()
+=item $fdp->fdp_run()
 
 Is FDP enabled on this device?
 
@@ -294,11 +286,10 @@ CDP compatibility
 
 =over
 
-=item $fdp->c_capabilities()
+=item $fdp->fdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
-binary string, 7 digits long, MSB.  Each digit represents a bit from the
-table below.
+binary string, MSB.  Each digit represents a bit from the table below.
 
 From L<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#18843>:
 
@@ -328,31 +319,30 @@ protocol.
 
 =back
 
-Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to
-this information.
+Thanks to Martin Lorensen for a pointer to this information.
 
 (C<fdpCacheCapabilities>)
 
-=item $fdp->c_domain()
+=item $fdp->fdp_domain()
 
 The CDP version of this returns remote VTP Management Domain as defined
 in C<CISCO-VTP-MIB::managementDomainName>
 
 (C<fdpCacheVTPMgmtDomain>)
 
-=item $fdp->c_duplex() 
+=item $fdp->fdp_duplex() 
 
 Returns the port duplex status from remote devices.
 
 (C<fdpCacheDuplex>)
 
-=item $fdp->c_id()
+=item $fdp->fdp_id()
 
 Returns remote device id string
 
 (C<fdpCacheDeviceId>)
 
-=item $fdp->c_if()
+=item $fdp->fdp_if()
 
 Returns the mapping to the SNMP Interface Table.
 
@@ -380,7 +370,7 @@ truncate the last number off of it :
   return \%fdp_if;
 
 
-=item $fdp->c_index()
+=item $fdp->fdp_index()
 
 Returns the mapping to the SNMP2 Interface table for FDP Cache Entries. 
 
@@ -391,37 +381,37 @@ See fdp_if() entry.
 
 (C<fdpCacheIfIndex>)
 
-=item  $fdp->c_ip()
+=item  $fdp->fdp_ip()
 
 Returns remote IP address
 
 (C<fdpCacheAddress>)
 
-=item $fdp->c_platform() 
+=item $fdp->fdp_platform() 
 
 Returns remote platform id 
 
 (C<fdpCachePlatform>)
 
-=item $fdp->c_port()
+=item $fdp->fdp_port()
 
 Returns remote port ID
 
 (C<fdpDevicePort>)
 
-=item  $fdp->c_proto()
+=item  $fdp->fdp_proto()
 
 Returns remote address type received.  Usually IP.
 
 (C<fdpCacheAddressType>)
 
-=item $fdp->c_ver() 
+=item $fdp->fdp_ver() 
 
 Returns remote hardware version
 
 (C<fdpCacheVersion>)
 
-=item $fdp->c_vlan()
+=item $fdp->fdp_vlan()
 
 Returns the remote interface native VLAN.
 

Info/IEEE802dot11.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( 'IEEE802dot11-MIB' => 'dot11DesiredSSID', );
 

Info/IEEE802dot3ad.pm

@@ -0,0 +1,141 @@
+# SNMP::Info::IEEE802dot3ad
+#
+# Copyright (c) 2014 SNMP::Info Developers
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::IEEE802dot3ad;
+
+use strict;
+use Exporter;
+use SNMP::Info::Aggregate;
+
+@SNMP::Info::IEEE802dot3ad::ISA = qw/
+  SNMP::Info::Aggregate
+  Exporter
+/;
+@SNMP::Info::IEEE802dot3ad::EXPORT_OK = qw/
+  agg_ports_lag
+/;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+  %SNMP::Info::Aggregate::MIBS,
+  'IEEE8023-LAG-MIB' => 'dot3adAggPortSelectedAggID',
+);
+
+%GLOBALS = ();
+
+%FUNCS = ();
+
+%MUNGE = ();
+
+sub agg_ports_lag {
+  my $dev = shift;
+
+  # TODO: implement partial
+  my $masters = $dev->dot3adAggActorOperKey;
+  my $slaves  = $dev->dot3adAggPortActorOperKey;
+
+  return {} unless
+    ref {} eq ref $masters and scalar keys %$masters
+    and ref {} eq ref $slaves and scalar keys %$slaves;
+
+  my $ret = {};
+  foreach my $s (keys %$slaves) {
+      next if $slaves->{$s} == 0;
+      foreach my $m (keys %$masters) {
+          next unless $masters->{$m} == $slaves->{$s};
+          $ret->{$s} = $m;
+          last;
+      }
+  }
+
+  return $ret;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::IEEE802dot3ad - SNMP Interface to IEEE Aggregated Links
+
+=head1 AUTHOR
+
+SNMP::Info Developers
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $info->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+This class provides access to Aggregated Links configuration on devices
+implementing C<IEEE8023-LAG-MIB>.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+L<SNMP::Info::Aggregate>
+
+=head2 Required MIBs
+
+=over
+
+=item F<IEEE8023-LAG-MIB>
+
+=back
+
+=head1 METHODS
+
+=over 4
+
+=item C<agg_ports_lag>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
+=back
+
+=cut

Info/IPv6.pm

@@ -44,7 +44,7 @@ use constant {
     IPV6MIB => 3,
 };
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 
 
@@ -59,7 +59,7 @@ $VERSION = '2.11';
 %FUNCS = ( 
     'ip_n2p_phys_addr'  => 'ipNetToPhysicalPhysAddress',    # IP-MIB
     'c_inet_phys_addr'  => 'cInetNetToMediaPhysAddress',    # CISCO-IETF-IP-MIB
-    'i6_n2p_phys_addr'  => 'ipv6NetToMediaNetAddress',      # IPV6-MIB
+    'i6_n2p_phys_addr'  => 'ipv6NetToMediaPhysAddress',     # IPV6-MIB
 
     'ip_n2p_phys_type'  => 'ipNetToPhysicalType',           # IP-MIB
     'c_inet_phys_type'  => 'cInetNetToMediaType',           # CISCO-IETF-IP-MIB
@@ -394,8 +394,9 @@ Jeroen van Ingen and Carlos Vicente
 =head1 DESCRIPTION
 
 The SNMP::Info::IPv6 class implements functions to for mapping IPv6 addresses 
-to MAC addresses, interfaces and more. It will use data from the IP-MIB, IPV6-MIB 
-or the CISCO-IETF-IP-MIB, whichever is supported by the device.
+to MAC addresses, interfaces and more. It will use data from the F<IP-MIB>,
+F<IPV6-MIB>, or the F<CISCO-IETF-IP-MIB>, whichever is supported by the
+device.
 
 This class is inherited by Info::Layer3 to provide IPv6 node tracking across  
 device classes.

Info/LLDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     'LLDP-MIB'          => 'lldpLocSysCapEnabled',
@@ -67,6 +67,7 @@ $VERSION = '2.11';
     'lldp_rem_sysname'  => 'lldpRemSysName',
     'lldp_rem_sysdesc'  => 'lldpRemSysDesc',
     'lldp_rem_sys_cap'  => 'lldpRemSysCapEnabled',
+    'lldp_rem_cap_spt'  => 'lldpRemSysCapSupported',
 
     # LLDP-MIB::lldpRemManAddrTable
     'lldp_rman_addr' => 'lldpRemManAddrIfSubtype',
@@ -80,6 +81,7 @@ $VERSION = '2.11';
     'lldp_rem_port_desc' => \&SNMP::Info::munge_null,
     'lldp_sys_cap'       => \&SNMP::Info::munge_bits,
     'lldp_rem_sys_cap'   => \&SNMP::Info::munge_bits,
+    'lldp_rem_cap_spt'   => \&SNMP::Info::munge_bits,
 );
 
 sub hasLLDP {
@@ -88,8 +90,12 @@ sub hasLLDP {
     # We may be have LLDP, but nothing in lldpRemoteSystemsData Tables
     # so we could be running LLDP but not return any useful information
     my $lldp_cap = $lldp->lldp_sys_cap();
-
     return 1 if defined $lldp_cap;
+
+    # If the device doesn't return local system capabilities, fallback by checking if it would report neighbors
+    my $lldp_rem = $lldp->lldp_rem_id() || {};
+    return 1 if scalar keys %$lldp_rem;
+
     return;
 }
 
@@ -98,23 +104,30 @@ sub lldp_if {
     my $partial = shift;
 
     my $addr    = $lldp->lldp_rem_pid($partial) || {};
-    my $i_descr = $lldp->i_description() || {};
+    my $i_descr = $lldp->i_description()        || {};
+    my $i_alias = $lldp->i_alias()              || {};
     my %r_i_descr = reverse %$i_descr;
-    
+    my %r_i_alias = reverse %$i_alias;
+
     my %lldp_if;
     foreach my $key ( keys %$addr ) {
         my @aOID = split( '\.', $key );
         my $port = $aOID[1];
         next unless $port;
-        # Local LLDP port may not equate to ifIndex
-        # Cross reference lldpLocPortDesc with ifDescr to get ifIndex
+        # Local LLDP port may not equate to ifIndex, see LldpPortNumber TEXTUAL-CONVENTION in LLDP-MIB.
+        # Cross reference lldpLocPortDesc with ifDescr and ifAlias to get ifIndex,
+        # prefer ifDescr over ifAlias because using cross ref with description is correct behavior 
+        # according to the LLDP-MIB. Some devices (eg H3C gear) seem to use ifAlias though.
         my $lldp_desc = $lldp->lldpLocPortDesc($port);
-        my $desc = $lldp_desc->{$port};
+        my $desc      = $lldp_desc->{$port};
         # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
-        if ( exists $r_i_descr{$desc} ) {
+        if ( $desc && exists $r_i_descr{$desc} ) {
             $port = $r_i_descr{$desc};
         }
-        
+        elsif ( $desc && exists $r_i_alias{$desc} ) {
+            $port = $r_i_alias{$desc};
+        }
+
         $lldp_if{$key} = $port;
     }
     return \%lldp_if;
@@ -158,14 +171,21 @@ sub lldp_port {
     my $pdesc = $lldp->lldp_rem_desc($partial)     || {};
     my $pid   = $lldp->lldp_rem_pid($partial)      || {};
     my $ptype = $lldp->lldp_rem_pid_type($partial) || {};
+    my $desc  = $lldp->lldp_rem_sysdesc($partial)  || {};
 
     my %lldp_port;
     foreach my $key ( sort keys %$pid ) {
         my $port = $pdesc->{$key};
+        my $type = $ptype->{$key};
+        if ( $type and $type eq 'interfaceName' ) {
+
+            # If the pid claims to be an interface name,
+            # believe it.
+            $port = $pid->{$key};
+        }
         unless ($port) {
             $port = $pid->{$key};
             next unless $port;
-            my $type = $ptype->{$key};
             next unless $type;
 
           # May need to format other types in the future, i.e. Network address
@@ -175,10 +195,14 @@ sub lldp_port {
             }
         }
 
-        # Nortel lldpRemPortDesc doesn't match ifDescr, but we can still
+        # Avaya/Nortel lldpRemPortDesc doesn't match ifDescr, but we can still
         # figure out slot.port based upon lldpRemPortDesc
-        if ( $port =~ /^(Unit\s+(\d+)\s+)?Port\s+(\d+)$/ ) {
-            $port = defined $1 ? "$2.$3" : "$3";
+        if ( defined $desc->{$key}
+            && $desc->{$key}
+            =~ /^Ethernet\s(?:Routing\s)?Switch\s\d|^Virtual\sServices\sPlatform\s\d/
+            && $port =~ /^(Unit\s+(\d+)\s+)?Port\s+(\d+)$/ )
+        {
+            $port = defined $1 ? "$2.$3" : "1.$3";
         }
 
         $lldp_port{$key} = $port;
@@ -204,10 +228,13 @@ sub lldp_id {
         if ( $type =~ /mac/ ) {
             $id = join( ':', map { sprintf "%02x", $_ } unpack( 'C*', $id ) );
         }
-        elsif ($type eq 'networkAddress') {
-            if ( length(unpack('H*', $id)) == 10 ) {
+        elsif ( $type eq 'networkAddress' ) {
+            if ( length( unpack( 'H*', $id ) ) == 10 ) {
+
                 # IP address (first octet is sign, I guess)
-                my @octets = (map { sprintf "%02x",$_ } unpack('C*', $id))[1..4];
+                my @octets
+                    = ( map { sprintf "%02x", $_ } unpack( 'C*', $id ) )
+                    [ 1 .. 4 ];
                 $id = join '.', map { hex($_) } @octets;
             }
         }
@@ -216,6 +243,54 @@ sub lldp_id {
     return \%lldp_id;
 }
 
+sub lldp_platform {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $rid  = $lldp->lldp_rem_id($partial)      || {};
+    my $desc = $lldp->lldp_rem_sysdesc($partial) || {};
+    my $name = $lldp->lldp_rem_sysname($partial) || {};
+
+    my %lldp_platform;
+    foreach my $key ( keys %$rid ) {
+        $lldp_platform{$key} = $desc->{$key} || $name->{$key};
+    }
+    return \%lldp_platform;
+}
+
+sub lldp_cap {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $lldp_caps = $lldp->lldp_rem_cap_spt($partial) || {};
+
+    # Encoded as BITS which Perl Net-SNMP implementation doesn't seem to
+    # be able to enumerate for us, so we have to get it from the MIB
+    # and enumerate ourselves
+    my $oid = SNMP::translateObj( 'lldpRemSysCapEnabled', 0, 1 ) || '';
+    my $enums = (
+        ( ref {} eq ref $SNMP::MIB{$oid}{'enums'} )
+        ? $SNMP::MIB{$oid}{'enums'}
+        : {}
+    );
+    my %r_enums = reverse %$enums;
+
+    my %lldp_cap;
+    foreach my $key ( keys %$lldp_caps ) {
+        my $cap_bits = $lldp_caps->{$key};
+        next unless $cap_bits;
+
+        my $count = 0;
+        foreach my $bit ( split //, $cap_bits ) {
+            if ($bit) {
+                push( @{ $lldp_cap{$key} }, $r_enums{$count} );
+            }
+            $count++;
+        }
+    }
+    return \%lldp_cap;
+}
+
 #sub root_ip {
 #    my $lldp = shift;
 #
@@ -241,7 +316,7 @@ sub _lldp_addr_index {
     my @oids   = split( /\./, $idx );
     my $index  = join( '.', splice( @oids, 0, 3 ) );
     my $proto  = shift(@oids);
-    my $length = shift(@oids);
+    shift(@oids) if scalar @oids > 4; # $length
 
     # IPv4
     if ( $proto == 1 ) {
@@ -411,9 +486,9 @@ with the remote system.
 
 =item $lldp->lldp_if()
 
-Returns the mapping to the SNMP Interface Table.  Trys to cross reference 
-(C<lldpLocPortDesc>) with (C<ifDescr>) to get (C<ifIndex>), if unable 
-defaults to (C<lldpRemLocalPortNum>).
+Returns the mapping to the SNMP Interface Table. Tries to cross reference 
+(C<lldpLocPortDesc>) with (C<ifDescr>) and (C<ifAlias>) to get (C<ifIndex>), 
+if unable defaults to (C<lldpRemLocalPortNum>).
 
 =item  $lldp->lldp_ip()
 
@@ -429,6 +504,17 @@ Currently only returns IPv4 or MAC addresses.
 
 Returns remote port ID
 
+=item $lldp->lldp_platform()
+
+Tries to return something useful from C<lldp_rem_sysdesc()> or
+C<lldp_rem_sysname()>.
+
+=item  $lldp->lldp_cap() 
+
+Returns hash of arrays with each array containing the system capabilities
+supported by the remote system.  Possible elements in the array are
+enumerated from C<LldpSystemCapabilitiesMap>.
+
 =back
 
 =head2 LLDP Remote Table (C<lldpRemTable>)
@@ -492,9 +578,9 @@ Nulls are removed before the value is returned.
 
 =item  $lldp->lldp_rem_sys_cap() 
 
-Returns which system capabilities are enabled on the local system.  Results
-are munged into an ascii binary string, LSB.  Each digit
-represents a bit from the table below:
+Returns which system capabilities are enabled on the remote system.  Results
+are munged into an ascii binary string, LSB.  Each digit represents a bit
+from the table below:
 
 =over
 

Info/Layer1.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( %SNMP::Info::MIBS, 'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex' );
 

Info/Layer1/Allied.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, 'root_ip' => 'actualIPAddr', );

Info/Layer1/Asante.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, );

Info/Layer1/Bayhub.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
@@ -93,7 +93,7 @@ sub os {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -334,6 +334,13 @@ sub bp_index {
     return \%bp_index;
 }
 
+sub fw_mac {
+    my $bayhub = shift;
+    my $partial   = shift;
+
+    return $bayhub->SUPER::fw_mac($partial);
+}
+
 sub fw_port {
     my $bayhub  = shift;
     my $partial = shift;
@@ -469,7 +476,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer1::Bayhub - SNMP Interface to Bay / Nortel Hubs
+SNMP::Info::Layer1::Bayhub - SNMP Interface to Bay/Nortel/Avaya Hubs
 
 =head1 AUTHOR
 
@@ -541,7 +548,7 @@ These are methods that return scalar value from SNMP
 
 =item $bayhub->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $bayhub->os()
 

Info/Layer1/Cyclades.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer1::MIBS,

Info/Layer1/S3000.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
@@ -324,6 +324,13 @@ sub bp_index {
     return \%bp_index;
 }
 
+sub fw_mac {
+    my $s3000 = shift;
+    my $partial   = shift;
+
+    return $s3000->SUPER::fw_mac($partial);
+}
+
 sub fw_port {
     my $s3000   = shift;
     my $partial = shift;

Info/Layer2.pm

@@ -45,7 +45,7 @@ use SNMP::Info::PowerEthernet;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,         %SNMP::Info::Bridge::MIBS,
@@ -123,30 +123,16 @@ sub serial {
     # precedence
     #   serial2,chassis parse,serial1
     return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
-    return $1
-        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
+
+    if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i ) {
+        return $1;
+    }
+
     return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
     return;
 }
 
-sub i_ignore {
-    my $l2      = shift;
-    my $partial = shift;
-
-    my $i_type = $l2->i_type($partial) || {};
-
-    my %i_ignore = ();
-
-    foreach my $if ( keys %$i_type ) {
-        my $type = $i_type->{$if};
-        $i_ignore{$if}++
-            if $type =~ /(loopback|other|cpu)/i;
-    }
-
-    return \%i_ignore;
-}
-
 sub interfaces {
     my $l2      = shift;
     my $partial = shift;
@@ -155,10 +141,18 @@ sub interfaces {
     my $i_descr    = $l2->i_description($partial) || {};
 
     # Replace the Index with the ifDescr field.
+    # Check for duplicates in ifDescr, if so uniquely identify by adding
+    # ifIndex to repeated values
+    my %seen;
     foreach my $iid ( keys %$i_descr ) {
         my $port = $i_descr->{$iid};
         next unless defined $port;
-        $interfaces->{$iid} = $port;
+        if ( $seen{$port}++ ) {
+            $interfaces->{$iid} = sprintf( "%s (%d)", $port, $iid );
+        }
+        else {
+            $interfaces->{$iid} = $port;
+        }
     }
     return $interfaces;
 }
@@ -293,12 +287,6 @@ name.
 
 Defaults to C<ifDescr> but checks and overrides with C<ifName>
 
-=item $l2->i_ignore()
-
-Returns reference to hash.  Increments value of IID if port is to be ignored.
-
-Ignores ports with C<ifType> of loopback, propvirtual, other, and cpu
-
 =back
 
 =head2 Table Methods imported from SNMP::Info

Info/Layer2/3Com.pm

@@ -0,0 +1,173 @@
+package SNMP::Info::Layer2::3Com;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+
+@SNMP::Info::Layer2::3Com::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::3Com::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::Layer2::MIBS,
+    'A3Com-products-MIB' => 'wlanAP7760',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+
+sub os {
+    return '3Com';
+}
+
+sub serial {
+    my $dev  = shift;
+    my $e_serial = $dev->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
+
+sub os_ver {
+
+    my $dev = shift;
+    my $e_swver  = $dev->e_swver();
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_swver ) {
+        if (defined $e_swver->{$e} and $e_swver->{$e} !~ /^\s*$/) {
+            return $e_swver->{$e};
+        }
+    }
+}
+
+sub vendor {
+    return '3Com';
+}
+
+sub model {
+
+    my $dsmodel = shift;
+    my $descr = $dsmodel->description();
+    if ( $descr =~ /^([\S ]+) Software.*/){
+        return $1;
+    }
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::3Com - SNMP Interface to L2 3Com Switches
+
+=head1 AUTHOR
+
+Max Kosmach
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $router = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $router->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for 3Com L2 devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<A3Com-products-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $device->vendor()
+
+Returns '3Com'
+
+=item $device->os()
+
+Returns '3Com'
+
+=item $device->os_ver()
+
+Return os version
+
+=item $device->model()
+
+Returns device model extracted from description
+
+=item $device->serial()
+
+Returns serial number
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=cut
+

Info/Layer2/Airespace.pm

@@ -1,5 +1,4 @@
 # SNMP::Info::Layer2::Airespace
-# $Id$
 #
 # Copyright (c) 2008 Eric Miller
 #
@@ -41,13 +40,14 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,      %SNMP::Info::Bridge::MIBS,
     %SNMP::Info::CDP::MIBS, %SNMP::Info::Airespace::MIBS,
-    'AIRESPACE-SWITCHING-MIB' => 'agentInterfaceVlanId',
     'CISCO-LWAPP-DOT11-CLIENT-MIB' => 'cldcClientCurrentTxRateSet',
+    'CISCO-LWAPP-DOT11-MIB'        => 'cldHtDot11nChannelBandwidth',
+    'CISCO-LWAPP-AP-MIB'           => 'cLApIfMacAddress',
 );
 
 %GLOBALS = (
@@ -58,28 +58,68 @@ $VERSION = '2.11';
 %FUNCS = (
     %SNMP::Info::FUNCS,      %SNMP::Info::Bridge::FUNCS,
     %SNMP::Info::CDP::FUNCS, %SNMP::Info::Airespace::FUNCS,
-
-    # This needs to be cleaned up, but for now we pretend to
-    # have the CISCO-DOT11-MIB for signal strengths, etc.
-    'cd11_sigstrength' => 'bsnMobileStationRSSI',	# kinda
-    'cd11_sigqual'     => 'bsnMobileStationSnr',	# kinda
-    'cd11_rxbyte'      => 'bsnMobileStationBytesReceived',
-    'cd11_txbyte'      => 'bsnMobileStationBytesSent',
-    'cd11_rxpkt'       => 'bsnMobileStationPacketsReceived',
-    'cd11_txpkt'       => 'bsnMobileStationPacketsSent',
-    'cd11_txrate'      => 'cldcClientCurrentTxRateSet',
+    # CISCO-LWAPP-AP-MIB::cLApTable
+    'ap_if_mac'        => 'cLApIfMacAddress',
+    # CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientTable
+    'client_txrate'    => 'cldcClientCurrentTxRateSet',
+    'cd11_proto'       => 'cldcClientProtocol',
     'cd11_rateset'     => 'cldcClientDataRateSet',
+    # CISCO-LWAPP-DOT11-MIB::cldHtMacOperationsTable
+    'cd11n_ch_bw'      => 'cldHtDot11nChannelBandwidth',
+
 );
 
 %MUNGE = (
     %SNMP::Info::MUNGE,      %SNMP::Info::Bridge::MUNGE,
     %SNMP::Info::CDP::MUNGE, %SNMP::Info::Airespace::MUNGE,
-    'cd11_rxpkt'	=> \&munge_64bits,
-    'cd11_txpkt'	=> \&munge_64bits,
-    'cd11_txrate'       => \&munge_cd11_txrate,
+    'ap_if_mac'         => \&SNMP::Info::munge_mac,
+    'cd11n_ch_bw'       => \&munge_cd11n_ch_bw,
     'cd11_rateset'      => \&munge_cd11_rateset,
+    'cd11_proto'        => \&munge_cd11_proto,
 );
 
+# 802.11n Modulation and Coding Scheme (MCS)
+my $mcs_index = {
+    20 => {
+	m0  => '6.5',
+	m1  => '13',
+	m2  => '19.5',
+	m3  => '26',
+	m4  => '39',
+	m5  => '52',
+	m6  => '58.5',
+	m7  => '65',
+	m8  => '13',
+	m9  => '26',
+	m10 => '39',
+	m11 => '52',
+	m12 => '78',
+	m13 => '104',
+	m14 => '117',
+	m15 => '130',
+	# This is a cheat for 802.11a bonded
+	m108 => '108',
+    },
+    40 => {
+	m0  => '15',
+	m1  => '30',
+	m2  => '45',
+	m3  => '60',
+	m4  => '90',
+	m5  => '120',
+	m6  => '135',
+	m7  => '157.5',
+	m8  => '30',
+	m9  => '60',
+	m10 => '90',
+	m11 => '120',
+	m12 => '180',
+	m13 => '240',
+	m14 => '270',
+	m15 => '300',
+    }
+};
+
 sub os {
     return 'cisco';
 }
@@ -96,9 +136,6 @@ sub model {
     return $model;
 }
 
-# vlan:
-# AIRESPACE-SWITCHING-MIB::agentInterfaceVlanId
-
 sub cd11_mac {
     my $airespace = shift;
     my $cd11_sigstrength = $airespace->cd11_sigstrength();
@@ -111,13 +148,47 @@ sub cd11_mac {
     return $ret;
 }
 
-sub munge_cd11_txrate {
-    my $rate = shift;
-    if ( $rate ) {
-        return [ $rate * 1.0 ];
-    } else {
-        return [ 0.0 ];
+sub cd11_txrate {
+    my $airespace = shift;
+    
+    my $rates  = $airespace->client_txrate() || {};
+    my $protos = $airespace->cd11_proto()    || {};
+    my $bws    = $airespace->cd11n_ch_bw()   || {};
+    
+    my $cd11_txrate = {};
+    foreach my $idx ( keys %$rates ) {
+	my $rate = $rates->{$idx} || '0.0';
+	
+	if ( $rate =~ /^\d+/ ) {
+            $cd11_txrate->{$idx} = [ $rate * 1.0 ];
+	}
+	elsif ( $rate =~ /^m/ ) {
+	    my $band = $protos->{$idx};
+	    my $bw   = $bws->{$band};
+	    $cd11_txrate->{$idx} = [ $mcs_index->{$bw}->{$rate} || '0.0' ];
+	}
+	else {
+	    $cd11_txrate->{$idx} = [ $rate ];
+	}
     }
+    return $cd11_txrate;
+}
+
+sub munge_cd11n_ch_bw {
+    my $bw = shift;
+    
+    if ( $bw =~ /forty/ ) {
+	return 40;
+    }
+    return 20;
+}
+
+sub munge_cd11_proto {
+    my $bw = shift;
+    
+    return 2 if ( $bw eq 'dot11n5' );
+
+    return 1;
 }
 
 sub munge_cd11_rateset {
@@ -125,11 +196,29 @@ sub munge_cd11_rateset {
     return [ map { $_ * 1.0 } split /,/, $rates ];
 }
 
-sub munge_64bits {
-    # The controller sometimes hands off a ridiculous value for packets.
-    # Just truncate it to 32 bits.
-    my $value = shift;
-    return $value & 0xffffffff;
+# Cisco provides the AP's Ethernet MAC via
+# CISCO-LWAPP-AP-MIB::cLApIfMacAddress this was not available pre-Cisco
+sub i_mac {
+    my $airespace = shift;
+    my $partial   = shift;
+
+    my $i_index = $airespace->i_index($partial)  || {};
+    my $ap_mac  = $airespace->ap_if_mac()        || {};
+
+    my $i_mac = $airespace->SUPER::i_mac() || {};
+    foreach my $iid ( keys %$i_index ) {
+	my $index = $i_index->{$iid};
+	next unless defined $index;
+
+	if ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+	    $index =~ s/\.\d+$//;
+	    next unless defined $index;
+	    my $sys_mac = join( '.', map { hex($_) } split( ':', $index ) );
+	    my $mac = $ap_mac->{$sys_mac};
+	    $i_mac->{$iid} = $mac;
+	}
+    }
+    return $i_mac;
 }
 
 1;
@@ -187,6 +276,12 @@ my $airespace = new SNMP::Info::Layer2::Airespace(...);
 
 =over
 
+=item F<CISCO-LWAPP-DOT11-CLIENT-MIB>
+
+=item F<CISCO-LWAPP-DOT11-MIB>
+
+=item F<CISCO-LWAPP-AP-MIB>
+
 =item Inherited Classes' MIBs
 
 See L<SNMP::Info::Airespace/"Required MIBs"> for its own MIB requirements.
@@ -238,10 +333,24 @@ to a hash.
 
 =item cd11_mac()
 
+Returns client radio interface MAC addresses.
+
+=item cd11_txrate()
+
+Returns client transmission speed in Mbs.
+
 =back 
 
 =head2 Overrides
 
+=over
+
+=item i_mac()
+
+Adds AP Ethernet MAC as port mac on radio ports from C<CISCO-LWAPP-AP-MIB>.
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::Airespace
 
 See documentation in L<SNMP::Info::Airespace/"TABLE METHODS"> for details.
@@ -254,15 +363,22 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
 
-=head1 MUNGES
+=head1 Data Munging Callback Subroutines
 
 =over
 
-=item munge_64bits()
+=item munge_cd11n_ch_bw()
+
+Converts 802.11n channel bandwidth to either 20 or 40.
+
+=item munge_cd11_proto()
+
+Converts 802.11n 2.4Ghz to 1 and 5Ghz to 2 to correspond to the
+(C<cldHtMacOperationsTable>) index.
 
 =item munge_cd11_rateset()
 
-=item munge_cd11_txrate()
+Converts rate set to array.
 
 =back
 

Info/Layer2/Aironet.pm

@@ -49,7 +49,7 @@ use SNMP::Info::IEEE802dot11;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %GLOBALS = (
     %SNMP::Info::IEEE802dot11::GLOBALS,
@@ -576,7 +576,7 @@ Returns radio interfaces.
 
 =item $aironet->cd11_mac()
 
-Returns radio interface MAC addresses.
+Returns client radio interface MAC addresses.
 
 =item $aironet->cd11_ssid()
 

Info/Layer2/Allied.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );
 

Info/Layer2/Bay.pm

@@ -1,492 +0,0 @@
-# SNMP::Info::Layer2::Bay
-# $Id$
-# This module depricated.  See Layer2::BayStack
-#
-# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
-#
-# Copyright (c) 2002,2003 Regents of the University of California
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-
-package SNMP::Info::Layer2::Bay;
-
-use strict;
-use Exporter;
-use SNMP::Info::Layer2;
-
-@SNMP::Info::Layer2::Bay::ISA       = qw/SNMP::Info::Layer2 Exporter/;
-@SNMP::Info::Layer2::Bay::EXPORT_OK = qw//;
-
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
-
-$VERSION = '2.11';
-
-# Set for No CDP
-%GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,
-    'cdp_id'  => 's5EnMsTopIpAddr',
-    'cdp_run' => 's5EnMsTopStatus',
-);
-
-%FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,
-    'imac2' => 'ifPhysAddress',
-
-    # S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmTable
-    'bay_topo_slot'     => 's5EnMsTopNmmSlot',
-    'bay_topo_port'     => 's5EnMsTopNmmPort',
-    'bay_topo_ip'       => 's5EnMsTopNmmIpAddr',
-    'bay_topo_seg'      => 's5EnMsTopNmmSegId',
-    'bay_topo_mac'      => 's5EnMsTopNmmMacAddr',
-    'bay_topo_platform' => 's5EnMsTopNmmChassisType',
-    'bay_topo_localseg' => 's5EnMsTopNmmLocalSeg',
-);
-
-%MIBS = (
-    %SNMP::Info::Layer2::MIBS,
-    'SYNOPTICS-ROOT-MIB'           => 'synoptics',
-    'S5-ETH-MULTISEG-TOPOLOGY-MIB' => 's5EnMsTop'
-);
-
-delete $MIBS{'CISCO-CDP-MIB'};
-
-# 450's report full duplex as speed = 20mbps?!
-$SNMP::Info::SPEED_MAP{20_000_000}  = '10 Mbps';
-$SNMP::Info::SPEED_MAP{200_000_000} = '100 Mbps';
-
-%MUNGE = ( %SNMP::Info::Layer2::MUNGE, 'i_mac2' => \&SNMP::Info::munge_mac, );
-
-sub os {
-    return 'bay';
-}
-
-sub os_ver {
-    my $bay   = shift;
-    my $descr = $bay->description();
-    return unless defined $descr;
-
-    # 303 / 304
-    if ( $descr =~ m/Rev: \d+\.\d+\.\d+\.\d+-(\d+\.\d+\.\d+\.\d+)/ ) {
-        return $1;
-    }
-
-    # 450
-    if ( $descr =~ m/SW:v(\d+\.\d+\.\d+\.\d+)/ ) {
-        return $1;
-    }
-    return;
-}
-
-sub os_bin {
-    my $bay   = shift;
-    my $descr = $bay->description();
-    return unless defined $descr;
-
-    # 303 / 304
-    if ( $descr =~ m/Rev: \d+\.(\d+\.\d+\.\d+)-\d+\.\d+\.\d+\.\d+/ ) {
-        return $1;
-    }
-
-    # 450
-    if ( $descr =~ m/FW:v(\d+\.\d+\.\d+\.\d+)/ ) {
-        return $1;
-    }
-    return;
-}
-
-sub vendor {
-
-    # or nortel, or synopsis?
-    return 'bay';
-}
-
-sub i_ignore {
-    my $bay   = shift;
-    my $descr = $bay->description();
-
-    my $i_type = $bay->i_type();
-
-    my %i_ignore;
-    foreach my $if ( keys %$i_type ) {
-        my $type = $i_type->{$if};
-        $i_ignore{$if}++ if $type =~ /(loopback|propvirtual|cpu)/i;
-    }
-
-    return \%i_ignore;
-}
-
-sub interfaces {
-    my $bay     = shift;
-    my $i_index = $bay->i_index();
-
-    return $i_index;
-}
-
-sub i_mac {
-    my $bay   = shift;
-    my $i_mac = $bay->i_mac2();
-
-    # Bay 303's with a hw rev < 2.11.4.5 report the mac as all zeros
-    foreach my $iid ( keys %$i_mac ) {
-        my $mac = $i_mac->{$iid};
-        delete $i_mac->{$iid} if $mac eq '00:00:00:00:00:00';
-    }
-    return $i_mac;
-}
-
-sub model {
-    my $bay = shift;
-    my $id  = $bay->id();
-    return unless defined $id;
-    my $model = &SNMP::translateObj($id);
-    return $id unless defined $model;
-    $model =~ s/^sreg-//i;
-
-    my $descr = $bay->description();
-
-    return '303' if ( $descr =~ /\D303\D/ );
-    return '304' if ( $descr =~ /\D304\D/ );
-    return '450' if ( $model =~ /BayStack450/ );
-    return $model;
-}
-
-# Hack in some CDP type stuff
-
-sub c_if {
-    my $bay           = shift;
-    my $bay_topo_port = $bay->bay_topo_port();
-
-    my %c_if;
-    foreach my $entry ( keys %$bay_topo_port ) {
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if $port == 0;
-        $c_if{"$port.1"} = $port;
-    }
-    return \%c_if;
-}
-
-sub c_ip {
-    my $bay           = shift;
-    my $bay_topo_ip   = $bay->bay_topo_ip();
-    my $bay_topo_port = $bay->bay_topo_port();
-    my $ip            = $bay->cdp_ip();
-
-    # Count the number of devices seen on each port.
-    #   more than one device seen means connected to a non-bay
-    #   device, but other bay devices are squawking further away.
-    my %ip_port;
-    foreach my $entry ( keys %$bay_topo_ip ) {
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if ( $port =~ /^[\d\.]+$/ and $port == 0 );
-        my $ip = $bay_topo_ip->{$entry};
-        push( @{ $ip_port{$port} }, $ip );
-    }
-
-    my %c_ip;
-    foreach my $port ( keys %ip_port ) {
-        my $ips = $ip_port{$port};
-        if ( scalar @$ips == 1 ) {
-            $c_ip{"$port.1"} = $ips->[0];
-        }
-        else {
-            $c_ip{"$port.1"} = $ips;
-        }
-    }
-
-    return \%c_ip;
-}
-
-sub c_port {
-    my $bay           = shift;
-    my $bay_topo_port = $bay->bay_topo_port();
-    my $bay_topo_seg  = $bay->bay_topo_seg();
-
-    my %c_port;
-    foreach my $entry ( keys %$bay_topo_seg ) {
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if $port == 0;
-
-        # For fake remotes (multiple IPs for a c_ip), use first found
-        next if defined $c_port{"$port.1"};
-
-        my $seg = $bay_topo_seg->{$entry};
-
-        # Segment id is (256 * remote slot_num) + (remote_port)
-        my $remote_port = $seg % 256;
-
-        $c_port{"$port.1"} = $remote_port;
-    }
-
-    return \%c_port;
-}
-
-sub c_platform {
-    my $bay               = shift;
-    my $bay_topo_port     = $bay->bay_topo_port();
-    my $bay_topo_platform = $bay->bay_topo_platform();
-
-    my %c_platform;
-    foreach my $entry ( keys %$bay_topo_platform ) {
-        my $port = $bay_topo_port->{$entry} || 0;
-        next if $port == 0;
-
-        # For fake remotes (multiple IPs for a c_ip), use first found
-        next if defined $c_platform{"$port.1"};
-
-        my $platform = $bay_topo_platform->{$entry};
-
-        $c_platform{"$port.1"} = $platform;
-    }
-
-    return \%c_platform;
-}
-
-1;
-__END__
-
-=head1 NAME
-
-SNMP::Info::Layer2::Bay - SNMP Interface to old Bay Network BayStack Switches
-
-=head1 AUTHOR
-
-Max Baker
-
-=head1 SYNOPSIS
-
-This module is Deprecated.  Please use Layer2::BayStack instead.
-
-=head1 DESCRIPTION
-
-Provides abstraction to the configuration information obtainable from a 
-Bay device through SNMP. 
-
-For speed or debugging purposes you can call the subclass directly, but not
-after determining a more specific class using the method above. 
-
- my $bay = new SNMP::Info::Layer2::Bay(...);
-
-=head2 Inherited Classes
-
-=over
-
-=item SNMP::Info::Layer2
-
-=back
-
-=head2 Required MIBs
-
-=over
-
-=item F<SYNOPTICS-ROOT-MIB>
-
-=item F<S5-ETH-MULTISEG-TOPOLOGY-MIB>
-
-=item Inherited classes
-
-MIBs required by L<SNMP::Info::Layer2/"Required MIBs"> and its superclasses.
-
-=back
-
-=head1 GLOBALS
-
-These are methods that return scalar value from SNMP
-
-=over
-
-=item $bay->vendor()
-
-Returns 'bay' :)
-
-=item $bay->model()
-
-Cross references $bay->id() to the F<SYNOPTICS-MIB> and returns
-the results.  303s and 304s have the same ID, so we have a hack
-to return depending on which it is. 
-
-Removes C<sreg-> from the model name
-
-=item $baystack->os()
-
-Returns 'bay'.
-
-=item $bay->os_ver()
-
-Returns the os version extracted from C<sysDescr>.
-
-=item $bay->os_bin()
-
-Returns the firmware version extracted from C<sysDescr>.
-
-=item $bay->cdp_id()
-
-Returns the IP that the device is sending out for its Nmm topology info.
-
-(C<s5EnMsTopIpAddr>)
-
-=item $bay->cdp_run()
-
-Returns if the F<S5-ETH-MULTISEG-TOPOLOGY> info is on for this device. 
-
-(C<s5EnMsTopStatus>)
-
-=back
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
-=head1 TABLE METHODS
-
-These are methods that return tables of information in the form of a reference
-to a hash.
-
-=head2 Overrides
-
-=over
-
-=item $bay->interfaces()
-
-Returns reference to map of IIDs to physical ports. 
-
-Currently simply returns the C<ifIndex>
-
-=item $bay->i_ignore()
-
-Returns reference to hash of IIDs to ignore.
-
-Simply calls the SNMP::Info::Layer2::i_ignore() for this.
-
-=item $bay->i_mac()
-
-Returns the C<ifPhysAddress> table entries. 
-
-Removes all entries matching '00:00:00:00:00:00' -- Certain 
-older revisions of Bay 303 and 304 firmware report all zeros
-for each port mac.
-
-=back
-
-=head2 Pseudo CDP information
-
-All entries with port=0 are local and ignored.
-
-=over
-
-=item $bay->c_if()
-
-Returns reference to hash.  Key: port.1 Value: port (iid)
-
-=item $bay->c_ip()
-
-Returns reference to hash.  Key: port.1 
-
-The value of each hash entry can either be a scalar or an array.
-A scalar value is most likely a direct neighbor to that port. 
-It is possible that there is a non-bay device in between this device and the
-remote device.
-
-An array value represents a list of seen devices.  The only time you will get
-an array of neighbors, is if there is a non-bay device in between two or more
-devices. 
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $bay->c_port()
-
-Returns reference to hash. Key: IID, Value: Remote port (interfaces)
-
-=item $bay->c_platform()
-
-Returns reference to hash. Key: IID, Value: Remote device type
-
-=item $bay->port()
-
-Returns reference to hash. Key: port.1 Value: port
-
-=item $bay->platform()
-
-Returns reference to hash. Key: port.1 Value: Remote Device Type
-
-=back
-
-=head2 Layer2 Topology info (C<s5EnMsTopNmmTable>)
-
-=over
-
-=item $bay->bay_topo_slot()
-
-Returns reference to hash.  Key: Table entry, Value:slot number
-
-(C<s5EnMsTopNmmSlot>)
-
-=item $bay->bay_topo_port()
-
-Returns reference to hash.  Key: Table entry, Value:Port Number
-(interface iid)
-
-(C<s5EnMsTopNmmPort>)
-
-=item $bay->bay_topo_ip()
-
-Returns reference to hash.  Key: Table entry, Value:Remote IP address of entry
-
-(C<s5EnMsTopNmmIpAddr>)
-
-=item $bay->bay_topo_seg()
-
-Returns reference to hash.  Key: Table entry, Value:Remote Segment ID
-
-(C<s5EnMsTopNmmSegId>)
-
-=item $bay->bay_topo_mac
-(C<s5EnMsTopNmmMacAddr>)
-
-Returns reference to hash.  Key: Table entry, Value:Remote MAC address
-
-=item $bay->bay_topo_platform
-
-Returns reference to hash.  Key: Table entry, Value:Remote Device Type
-
-(C<s5EnMsTopNmmChassisType>)
-
-=item $bay->bay_topo_localseg
-
-Returns reference to hash.  Key: Table entry, Value:Boolean, if bay_topo_seg()
-is local
-
-(C<s5EnMsTopNmmLocalSeg>)
-
-=back
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
-=cut

Info/Layer2/Baystack.pm

@@ -46,12 +46,13 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::RapidCity::MIBS, %SNMP::Info::NortelStack::MIBS,
     %SNMP::Info::SONMP::MIBS,
+    'BAY-STACK-PETH-EXT-MIB' => 'bspePethPsePortExtMeasuredPower',
 );
 
 %GLOBALS = (
@@ -64,6 +65,7 @@ $VERSION = '2.11';
     %SNMP::Info::Layer3::FUNCS,    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::RapidCity::FUNCS, %SNMP::Info::NortelStack::FUNCS,
     %SNMP::Info::SONMP::FUNCS,
+    'peth_port_power' => 'bspePethPsePortExtMeasuredPower',
 );
 
 # 450's report full duplex as speed = 20mbps?!
@@ -79,27 +81,20 @@ $SNMP::Info::SPEED_MAP{2_000_000_000} = '1.0 Gbps';
 
 sub os {
     my $baystack = shift;
-    my $descr    = $baystack->description();
-    my $model    = $baystack->model();
+    my $descr    = $baystack->description() || "";
+    my $model    = $baystack->model() || "";
 
-    if ( ( defined $descr and $descr =~ /Business Ethernet Switch.*SW:v/i ) )
-    {
+    if ( $descr =~ /Business Ethernet Switch.*SW:v/i ) {
         return 'bes';
     }
-    if (
-        (
-           (defined $model and $model =~ /(420|425|BPS)/ )
-        and
-           (defined $descr and $descr =~ m/SW:v[1-2]/i )
-        )
-        or
-        (
-            (defined $model and $model =~ /(410|450|380)/ )
-        )
-       )
+    if (   ( ( $model =~ /(420|425|BPS)/ ) and ( $descr =~ m/SW:v[1-2]/i ) )
+        or ( ( $model =~ /(410|450|380)/ ) ) )
     {
         return 'baystack';
     }
+    if ( $model =~ /VSP/ ) {
+        return 'vsp';
+    }
 
     return 'boss';
 }
@@ -126,7 +121,7 @@ sub os_bin {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -141,9 +136,12 @@ sub model {
     return '303' if ( defined $descr and $descr =~ /\D303\D/ );
     return '304' if ( defined $descr and $descr =~ /\D304\D/ );
     return 'BPS' if ( $model =~ /BPS2000/i );
-    return $2
-        if ( $model
-        =~ /(ES|ERS|BayStack|EthernetRoutingSwitch|EthernetSwitch)-?(\d+)/ );
+    
+    # Pull sreg- from all
+    $model =~ s/^sreg-//;
+    # Strip ES/ERS/BayStack etc. from those families
+    $model =~ s/^(E(R)?S|BayStack|Ethernet(Routing)?Switch)-?//;
+    $model =~ s/-ethSwitchNMM//;
 
     return $model;
 }
@@ -214,7 +212,7 @@ sub i_name {
 
 sub index_factor {
     my $baystack = shift;
-    my $model    = $baystack->model();
+    my $model    = $baystack->model() || "";
     my $os       = $baystack->os();
     my $os_ver   = $baystack->os_ver();
     my $op_mode  = $baystack->ns_op_mode();
@@ -228,142 +226,16 @@ sub index_factor {
 
     my $index_factor = 32;
     $index_factor = 64
-        if ( ( defined $model and $model =~ /(470)/ )
+        if ( ( $model =~ /(470)/ )
         or ( $os =~ m/(boss|bes)/ ) and ( $op_mode eq 'pure' ) );
     $index_factor = 128
-        if ( ( defined $model and $model =~ /(5[56]\d\d)/ )
+        if ( ( $model =~ /(5[56]\d\d)|VSP/ )
         and ( $os_ver >= 6 ) );
 
     return $index_factor;
 }
 
-#  Use SONMP and/or LLDP
 
-sub hasCDP {
-    my $baystack = shift;
-
-    return $baystack->hasLLDP() || $baystack->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $cdp  = $baystack->SUPER::c_ip($partial) || {};
-    my $lldp = $baystack->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_if($partial)     || {};
-    my $cdp  = $baystack->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_port($partial)     || {};
-    my $cdp  = $baystack->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_id($partial)     || {};
-    my $cdp  = $baystack->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $baystack = shift;
-    my $partial  = shift;
-
-    my $lldp = $baystack->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $baystack->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
 
 # Newer devices support ENTITY-MIB, use if available otherwise use proprietary
 # methods.
@@ -469,14 +341,68 @@ sub peth_port_ifindex {
     return \%peth_port_ifindex;
 }
 
+# Currently only ERS 4800 v5.8+ support the rcBridgeSpbmMacTable 
+# which holds the FDB for a SPBM edge deployment.
+#
+# Q-BRIDGE still holds some entries when the rcBridgeSpbmMacTable is in use
+# so we merge hash entries.
+
+sub fw_mac {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::fw_mac() || {};
+    my $spbm = $rapidcity->rc_spbm_fw_mac() || {};
+    my $fw_mac = { %$qb, %$spbm };
+    
+    return $fw_mac;
+}
+
+sub fw_port {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::fw_port() || {};
+    my $spbm = $rapidcity->rc_spbm_fw_port() || {};
+    my $fw_port = { %$qb, %$spbm };
+    
+    return $fw_port;
+}
+
+sub fw_status {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::fw_status() || {};    
+    my $spbm = $rapidcity->rc_spbm_fw_status() || {};
+    my $fw_status = { %$qb, %$spbm };
+    
+    return $fw_status;
+}
+
+sub qb_fw_vlan {
+    my $rapidcity = shift;
+
+    my $qb = $rapidcity->SUPER::qb_fw_vlan() || {};
+    my $spbm = $rapidcity->rc_spbm_fw_vlan() || {};
+    my $qb_fw_vlan = { %$qb, %$spbm };
+    
+    return $qb_fw_vlan;
+}
+
+# Baystack uses S5-AGENT-MIB (loaded in NortelStack) versus RAPID-CITY
+sub stp_ver {
+    my $rapidcity = shift;
+
+    return $rapidcity->s5AgSysSpanningTreeOperMode()
+      || $rapidcity->SUPER::stp_ver();
+}
+
 1;
 
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Baystack - SNMP Interface to Nortel Ethernet (Baystack)
-Switches
+SNMP::Info::Layer2::Baystack - SNMP Interface to Avaya Ethernet Switch
+(Baystack) and VSP 7000 series switches
 
 =head1 AUTHOR
 
@@ -499,8 +425,9 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Nortel 
-Ethernet Switch (Baystack) through SNMP. 
+Provides abstraction to the configuration information obtainable from an
+Avaya Ethernet Switch (formerly Nortel/Bay Baystack) and VSP 7000 series
+through SNMP. 
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -527,6 +454,8 @@ my $baystack = new SNMP::Info::Layer2::Baystack(...);
 
 =over
 
+=item F<BAY-STACK-PETH-EXT-MIBB>
+
 =back
 
 =head2 Inherited MIBs
@@ -549,7 +478,7 @@ These are methods that return scalar value from SNMP
 
 =item $baystack->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $baystack->model()
 
@@ -569,6 +498,14 @@ Returns 'baystack' or 'boss' depending on software version.
 
 Returns the firmware version extracted from C<sysDescr>.
 
+=item $baystack->stp_ver()
+
+Returns the particular STP version running on this device.  
+
+Values: C<nortelStpg>, C<pvst>, C<rstp>, C<mstp>, C<ieee8021d>
+
+(C<s5AgSysSpanningTreeOperMode>)
+
 =back
 
 =head2 Overrides
@@ -645,10 +582,16 @@ revisions of Baystack firmware report all zeros for each port mac.
 Crosses C<ifName> with C<ifAlias> and returns the human set port name if
 exists.
 
-=item $poe->peth_port_ifindex()
+=item $baystack->peth_port_ifindex()
 
 Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 
+=item $baystack->peth_port_power()
+
+Power supplied by PoE ports, in milliwatts
+
+(C<bspePethPsePortExtMeasuredPower>)
+
 =back
 
 =head2 F<ENTITY-MIB> Information
@@ -719,51 +662,29 @@ ns_e_vendor().
 
 =back
 
-=head2 Topology information
+=head2 Layer 2 Forwarding Database
 
-Based upon the software version devices may support SynOptics Network
-Management Protocol (SONMP) and Link Layer Discovery Protocol (LLDP). These
-methods will query both and return the combination of all information. As a
-result, there may be identical topology information returned from the two
-protocols causing duplicate entries.  It is the calling program's
-responsibility to identify any duplicate entries and remove duplicates if
-necessary.
+These methods try to obtain the layer 2 forwarding database entries via the
+normal bridge methods as well as SPBM entries via rapid city methods.
 
 =over
 
-=item $baystack->hasCDP()
+=item $baystack->fw_mac()
 
-Returns true if the device is running either SONMP or LLDP.
+Returns reference to hash of forwarding table MAC Addresses
 
-=item $baystack->c_if()
+=item $baystack->fw_port()
 
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
 
-=item $baystack->c_ip()
+=item $baystack->qb_fw_vlan()
 
-Returns reference to hash.  Key: iid Value: remote IPv4 address
+Returns reference to hash of forwarding table entries VLAN ID
 
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
+=item $baystack->fw_status()
 
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-SONMP/LLDP device in between two or
-more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $baystack->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $baystack->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $baystack->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+Returns reference to hash of forwarding table entries status
 
 =back
 

Info/Layer2/C1900.pm

@@ -37,19 +37,23 @@ use Exporter;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
 use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoAgg;
 use SNMP::Info::Layer2;
 
 @SNMP::Info::Layer2::C1900::ISA = qw/SNMP::Info::CDP SNMP::Info::CiscoStats
-    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoStpExtensions SNMP::Info::CiscoAgg SNMP::Info::Layer2
     Exporter/;
 @SNMP::Info::Layer2::C1900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
     %SNMP::Info::CiscoConfig::GLOBALS,
     %SNMP::Info::CiscoStats::GLOBALS,
     %SNMP::Info::CDP::GLOBALS,
@@ -58,6 +62,8 @@ $VERSION = '2.11';
 
 %FUNCS = (
     %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
     %SNMP::Info::CiscoConfig::FUNCS,
     %SNMP::Info::CiscoStats::FUNCS,
     %SNMP::Info::CDP::FUNCS,
@@ -75,6 +81,8 @@ $VERSION = '2.11';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
     %SNMP::Info::CiscoConfig::MIBS,
     %SNMP::Info::CiscoStats::MIBS,
     %SNMP::Info::CDP::MIBS,
@@ -84,8 +92,9 @@ $VERSION = '2.11';
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,             %SNMP::Info::CiscoAgg::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE, %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,         %SNMP::Info::CDP::MUNGE,
 );
 
 sub bulkwalk_no         { return 1; }
@@ -203,7 +212,8 @@ sub i_vlan {
     my $partial = shift;
 
     # Overlap allows more than one VLAN per port.  Unable to determine default
-    my $overlap = $c1900->bridgeGroupAllowMembershipOverlap()
+    my $overlap 
+        = $c1900->bridgeGroupAllowMembershipOverlap()
         || $c1900->vlanAllowMembershipOverlap()
         || 'disabled';
 
@@ -251,6 +261,8 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged { return; }
+
 sub bp_index {
     my $c1900   = shift;
     my $partial = shift;
@@ -258,7 +270,7 @@ sub bp_index {
     my $if_index = $c1900->i_index($partial);
     my $index = $c1900->orig_bp_index($partial) || {};
     foreach my $iid ( keys %$if_index ) {
-        $index->{$iid} = $iid if(!defined $index->{$iid});
+        $index->{$iid} = $iid if ( !defined $index->{$iid} );
     }
     return $index;
 }
@@ -312,6 +324,10 @@ after determining a more specific class using the method above.
 
 =item SNMP::Info::CiscoConfig
 
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::CiscoAgg
+
 =item SNMP::Info::Layer2
 
 =back
@@ -336,6 +352,10 @@ See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
 
 See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
 
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its MIB requirements.
+
 See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
@@ -394,6 +414,14 @@ See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
 See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoAgg
+
+See L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
 See L<SNMP::Info::Layer2/"GLOBALS"> for details.
@@ -444,6 +472,9 @@ bridge group IDs.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $c1900->i_vlan_membership_untagged()
+
+Unsupported, returns nothing.
 
 =item $c1900->bp_index()
 
@@ -513,6 +544,14 @@ See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
 See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/C2900.pm

@@ -34,33 +34,21 @@ package SNMP::Info::Layer2::C2900;
 
 use strict;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::Layer2;
+use SNMP::Info::Layer2::Cisco;
 
-@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig
-    SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::Layer2::Cisco Exporter/;
 @SNMP::Info::Layer2::C2900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS, %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::Cisco::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer2::Cisco::FUNCS,
     'i_name' => 'ifAlias',
 
     # C2900PortEntry
@@ -71,15 +59,12 @@ $VERSION = '2.11';
 );
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS, 'CISCO-C2900-MIB' => 'ciscoC2900MIB',
+    %SNMP::Info::Layer2::Cisco::MIBS,
+    'CISCO-C2900-MIB' => 'ciscoC2900MIB',
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer2::Cisco::MUNGE,
 );
 
 sub vendor {
@@ -139,6 +124,32 @@ sub i_duplex_admin {
     return \%i_duplex_admin;
 }
 
+sub i_speed_admin {
+    my $c2900   = shift;
+    my $partial = shift;
+
+    my %i_speed_admin;
+    my $p_port        = $c2900->p_port() || {};
+    my $interfaces    = $c2900->interfaces($partial);
+    my $c2900_p_index = $c2900->c2900_p_index() || {};
+
+    my %reverse_2900 = reverse %$c2900_p_index;
+    my $c2900_p_speed
+        = $c2900->c2900_p_speed_admin( $reverse_2900{$partial} );
+
+    my %speeds = (
+        'autoDetect' => 'auto',
+        's10000000'  => '10 Mbps',
+        's100000000' => '100 Mbps',
+    );
+
+    %i_speed_admin
+        = map { $c2900_p_index->{$_} => $speeds{ $c2900_p_speed->{$_} } }
+        keys %$c2900_p_index;
+
+    return \%i_speed_admin;
+}
+
 sub set_i_speed_admin {
     my $c2900 = shift;
     my ( $speed, $iid ) = @_;
@@ -243,15 +254,7 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::Layer2
+=item SNMP::Info::Layer2::Cisco
 
 =back
 
@@ -267,15 +270,7 @@ Part of the v2 MIBs from Cisco.
 
 =head2 Inherited MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+See L<SNMP::Info::Layer2::Cisco/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
 
@@ -295,25 +290,9 @@ Returns 1.  Use vlan indexing.
 
 =back
 
-=head2 Globals imported from SNMP::Info::CiscoVTP
+=head2 Globals imported from SNMP::Info::Layer2::Cisco
 
-See L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See L<SNMP::Info::Layer2/"GLOBALS"> for details.
+See L<SNMP::Info::Layer2::Cisco/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -349,6 +328,10 @@ Returns reference to hash of IIDs to admin duplex setting
 
 Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex_admin()
 
+=item $c2900->i_speed_admin()
+
+Returns reference to hash of IIDs to admin speed setting.
+
 =back
 
 =head2 F<C2900-MIB> Port Entry Table 
@@ -381,25 +364,9 @@ Gives Admin speed of port
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
+=head2 Table Methods imported from SNMP::Info::Layer2::Cisco
 
-See L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+See L<SNMP::Info::Layer2::Cisco/"TABLE METHODS"> for details.
 
 =head1 SET METHODS
 

Info/Layer2/Catalyst.pm

@@ -34,48 +34,34 @@ package SNMP::Info::Layer2::Catalyst;
 use strict;
 use Exporter;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::Layer2;
+use SNMP::Info::Layer2::Cisco;
 
 @SNMP::Info::Layer2::Catalyst::ISA
-    = qw/SNMP::Info::CiscoStack SNMP::Info::CiscoVTP
-    SNMP::Info::CDP SNMP::Info::CiscoStats
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::Layer2 Exporter/;
+    = qw/SNMP::Info::CiscoStack SNMP::Info::Layer2::Cisco Exporter/;
 @SNMP::Info::Layer2::Catalyst::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,   %SNMP::Info::CiscoStack::MIBS,
+    %SNMP::Info::Layer2::Cisco::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::Cisco::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS, %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,   %SNMP::Info::CiscoStack::FUNCS,
+    %SNMP::Info::Layer2::Cisco::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoVTP::MUNGE,   %SNMP::Info::CiscoStack::MUNGE,
+    %SNMP::Info::Layer2::Cisco::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 # Overidden Methods
@@ -228,18 +214,10 @@ after determining a more specific class using the method above.
 
 =over
 
+=item SNMP::Info::Layer2::Cisco
+
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::Layer2
-
 =back
 
 =head2 Required MIBs
@@ -248,19 +226,10 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
+See L<SNMP::Info::Layer2::Cisco/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
-requirements.
-
-See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 These MIBs are found in the standard v2 MIBs from Cisco.
@@ -290,30 +259,14 @@ Returns 1.  Use vlan indexing.
 
 =back
 
+=head2 Global Methods imported from SNMP::Info::Layer2::Cisco
+
+See documentation in L<SNMP::Info::Layer2::Cisco/"GLOBALS"> for details.
+
 =head2 Global Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -348,29 +301,12 @@ have problems with F<BRIDGE-MIB>
 
 =back
 
+=head2 Table Methods imported from SNMP::Info::Layer2::Cisco
+
+See documentation in L<SNMP::Info::Layer2::Cisco/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
 =cut

Info/Layer2/Centillion.pm

@@ -43,7 +43,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -246,6 +246,20 @@ sub slot_offset {
     return 0;
 }
 
+sub fw_mac {
+    my $centillion = shift;
+    my $partial   = shift;
+
+    return $centillion->SUPER::fw_mac($partial);
+}
+
+sub fw_port {
+    my $centillion = shift;
+    my $partial   = shift;
+
+    return $centillion->SUPER::fw_port($partial);
+}
+
 1;
 __END__
 
@@ -371,11 +385,6 @@ Returns 'Centillion'
 
 =over
 
-=item $centillion->layers()
-
-Returns 00000011.  Class emulates Layer 2 functionality through proprietary
-MIBs.
-
 =item  $centillion->index_factor()
 
 Required by SNMP::Info::SONMP.  Number representing the number of ports

Info/Layer2/Cisco.pm

@@ -35,49 +35,71 @@ use Exporter;
 use SNMP::Info::CiscoVTP;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
 use SNMP::Info::CiscoRTT;
-use SNMP::Info::CiscoQOS;
 use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoAgg;
 use SNMP::Info::Layer2;
 
 @SNMP::Info::Layer2::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    SNMP::Info::CiscoStats SNMP::Info::CiscoRTT
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoStpExtensions SNMP::Info::CiscoAgg
+    SNMP::Info::Layer2
     Exporter/;
 @SNMP::Info::Layer2::Cisco::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoQOS::MIBS,   %SNMP::Info::CiscoRTT::MIBS,
-    %SNMP::Info::CiscoImage::MIBS, %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,        %SNMP::Info::CiscoVTP::MIBS,
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoRTT::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoQOS::GLOBALS,   %SNMP::Info::CiscoRTT::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,        %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoQOS::FUNCS,   %SNMP::Info::CiscoRTT::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS, %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,        %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoRTT::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoQOS::MUNGE,   %SNMP::Info::CiscoRTT::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE, %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,        %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::CiscoAgg::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoRTT::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoVTP::MUNGE,
 );
 
 1;
@@ -85,8 +107,9 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
-that are not covered in other classes.
+SNMP::Info::Layer2::Cisco - SNMP Interface to L2 Cisco devices that are
+not covered in other classes and the base L2 Cisco class for other device
+specific L2 Cisco classes.
 
 =head1 AUTHOR
 
@@ -110,7 +133,8 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Subclass for Generic Cisco Routers running IOS
+Subclass for Generic Layer 2 Cisco devices and the base L2 Cisco class for
+other device specific L2 Cisco classes.
 
 =head2 Inherited Classes
 
@@ -122,14 +146,16 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::CiscoStats
 
-=item SNMP::Info::CiscoImage
-
 =item SNMP::Info::CiscoRTT
 
-=item SNMP::Info::CiscoQOS
-
 =item SNMP::Info::CiscoConfig
 
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::CiscoAgg
+
 =item SNMP::Info::Layer2
 
 =back
@@ -142,18 +168,20 @@ Subclass for Generic Cisco Routers running IOS
 
 See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
 
 =back
@@ -182,22 +210,26 @@ See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoConfig
 
 See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
@@ -219,22 +251,26 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoConfig
 
 See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/CiscoSB.pm

@@ -0,0 +1,264 @@
+# SNMP::Info::Layer2::CiscoSB
+# $Id$
+#
+# Copyright (c) 2013 Nic Bernstein
+#
+# Copyright (c) 2008-2009 Max Baker changes from version 0.8 and beyond.
+#
+# Copyright (c) 2003 Regents of the University of California
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::CiscoSB;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+use SNMP::Info::Entity;
+use SNMP::Info::EtherLike;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CDP;
+
+@SNMP::Info::Layer2::CiscoSB::ISA
+    = qw/SNMP::Info::Layer2 SNMP::Info::Entity SNMP::Info::EtherLike
+    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::CiscoSB::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+# This will be filled in with the device's index into the EntPhysicalEntry
+# table by the serial() function.
+our $index = undef;
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+    %SNMP::Info::EtherLike::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    'descr'  => 'sysDescr'
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::Entity::FUNCS,
+    %SNMP::Info::EtherLike::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+);
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::Entity::MIBS,
+    %SNMP::Info::EtherLike::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CDP::MIBS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+    %SNMP::Info::EtherLike::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+);
+
+
+sub vendor {
+    return 'cisco';
+}
+
+# Walk the entPhysicalSerialNum table and return the first serial found
+sub serial {
+    my $ciscosb  = shift;
+    my $e_serial = $ciscosb->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
+
+sub os_ver {
+    my $ciscosb = shift;
+    my $os_ver  = $ciscosb->e_swver();
+
+    return $os_ver->{$index} if defined $index;
+}
+  
+# Grab e_model from Entity and tag on e_hwver
+sub model {
+    my $ciscosb = shift;
+    my $e_model   = $ciscosb->e_model();
+    my $e_hwver = $ciscosb->e_hwver();
+
+    if (defined ($index)) {
+        my $model = "$e_model->{$index} $e_hwver->{$index}";
+        return $model;
+    }
+    return $ciscosb->description();
+}
+
+# ifDescr is the same for all interfaces in a class, but the ifName is
+# unique, so let's use that for port name.
+sub interfaces {
+    my $ciscosb = shift;
+    my $partial = shift;
+
+    my $interfaces = $ciscosb->i_name($partial);
+
+    return $interfaces;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::CiscoSB - SNMP Interface to Cisco Small Business series
+
+=head1 AUTHOR
+
+Nic Bernstein (shamelessly stolen from Max Baker's Aironet code)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ciscosb = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $ciscosb->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides interface to SNMP Data available on Cisco Small Business (nee LinkSys)
+managed switches. [i.e. those matching enterprises(1).cisco(9).otherEnterprises(6).ciscosb(1)]
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=item SNMP::Info::Entity
+
+=item SNMP::Info::EtherLike
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoConfig
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes
+
+MIBs required by the inherited classes listed above.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ciscosb->vendor()
+
+Returns 'cisco'
+
+=item $ciscosb->os_ver()
+
+Returns software version (C<entPhysicalSoftwareRev>)
+
+=item $ciscosb->serial()
+
+Returns serial number of unit (C<entPhysicalSerialNum>)
+
+=item $ciscosb->model()
+
+Returns model and hardware revision of unit
+(C<entPhysicalModelName+entPhysicalHardwareRev>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::EtherLike
+
+See documentation in L<SNMP::Info::EtherLike/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+=head2 Overrides
+
+=over
+
+=item $ciscosb->interfaces()
+
+Uses the i_name() field.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::EtherLike
+
+See documentation in L<SNMP::Info::EtherLike/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/Foundry.pm

@@ -1,349 +0,0 @@
-# SNMP::Info::Layer2::Foundry - SNMP Interface to Foundry Switches
-# $Id$
-#
-# Copyright (c) 2008 Max Baker
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-
-package SNMP::Info::Layer2::Foundry;
-
-use strict;
-use Exporter;
-use SNMP::Info::Layer2;
-use SNMP::Info::FDP;
-use SNMP::Info::EtherLike;
-use SNMP::Info::MAU;
-
-@SNMP::Info::Layer2::Foundry::ISA
-    = qw/SNMP::Info::Layer2 SNMP::Info::FDP SNMP::Info::EtherLike
-    SNMP::Info::MAU    Exporter/;
-@SNMP::Info::Layer2::Foundry::EXPORT_OK = qw//;
-
-use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
-
-$VERSION = '2.11';
-
-%MIBS = (
-    %SNMP::Info::Layer2::MIBS,    %SNMP::Info::FDP::MIBS,
-    %SNMP::Info::EtherLike::MIBS, %SNMP::Info::MAU::MIBS,
-    'FOUNDRY-SN-ROOT-MIB' => 'foundry',
-);
-
-%GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,    %SNMP::Info::FDP::GLOBALS,
-    %SNMP::Info::EtherLike::GLOBALS, %SNMP::Info::MAU::GLOBALS,
-);
-
-%FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,    %SNMP::Info::FDP::FUNCS,
-    %SNMP::Info::EtherLike::FUNCS, %SNMP::Info::MAU::FUNCS,
-    'test' => 'dot1dStpPortState',
-);
-
-%MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,    %SNMP::Info::FDP::MUNGE,
-    %SNMP::Info::EtherLike::MUNGE, %SNMP::Info::MAU::MUNGE,
-);
-
-# Method OverRides
-
-#sub bulkwalk_no { 1;}
-
-*SNMP::Info::Layer2::Foundry::i_duplex = \&SNMP::Info::MAU::mau_i_duplex;
-*SNMP::Info::Layer2::Foundry::i_duplex_admin
-    = \&SNMP::Info::MAU::mau_i_duplex_admin;
-*SNMP::Info::Layer2::Foundry::i_vlan = \&SNMP::Info::Bridge::qb_i_vlan_t;
-
-# todo doc these
-
-sub os_ver {
-    my $foundry = shift;
-
-    my $e_name = $foundry->e_name();
-
-    # find entity table entry for "stackmanaget.1"
-    my $unit_iid = undef;
-    foreach my $e ( keys %$e_name ) {
-        my $name = $e_name->{$e} || '';
-        $unit_iid = $e if $name eq 'stackmanaget.1';
-    }
-
-    # Default to OID method if no dice.
-    unless ( defined $unit_iid ) {
-        return $foundry->SUPER::model();
-    }
-
-    # Find Model Name
-    my $e_fwver = $foundry->e_fwver();
-    if ( defined $e_fwver->{$unit_iid} ) {
-        return $e_fwver->{$unit_iid};
-    }
-
-    # Not found in ENTITY-MIB, go up a level.
-    return $foundry->SUPER::os_ver();
-}
-
-sub model {
-    my $foundry = shift;
-
-    my $e_name = $foundry->e_name();
-
-    # find entity table entry for "unit.1"
-    my $unit_iid = undef;
-    foreach my $e ( keys %$e_name ) {
-        my $name = $e_name->{$e} || '';
-        $unit_iid = $e if $name eq 'unit.1';
-    }
-
-    # Default to OID method if no dice.
-    unless ( defined $unit_iid ) {
-        return $foundry->SUPER::model();
-    }
-
-    # Find Model Name
-    my $e_model = $foundry->e_model();
-    if ( defined $e_model->{$unit_iid} ) {
-        return $e_model->{$unit_iid};
-    }
-
-    # Not found in ENTITY-MIB, go up a level.
-    return $foundry->SUPER::model();
-
-}
-
-sub serial {
-    my $foundry = shift;
-
-    my $e_name = $foundry->e_name();
-
-    # find entity table entry for "unit.1"
-    my $unit_iid = undef;
-    foreach my $e ( keys %$e_name ) {
-        my $name = $e_name->{$e} || '';
-        $unit_iid = $e if $name eq 'unit.1';
-    }
-    return unless defined $unit_iid;
-
-    # Look up serial of found entry.
-    my $e_serial = $foundry->e_serial();
-    return $e_serial->{$unit_iid} if defined $e_serial->{$unit_iid};
-
-    return $foundry->SUPER::serial();
-}
-
-sub interfaces {
-    my $foundry = shift;
-    my $i_descr = $foundry->i_description;
-    my $i_name  = $foundry->i_name;
-
-    # use ifName only if it is in portn
-    #   format.  For EdgeIrons
-    # else use ifDescr
-    foreach my $iid ( keys %$i_name ) {
-        my $name = $i_name->{$iid};
-        next unless defined $name;
-        $i_descr->{$iid} = $name
-            if $name =~ /^port\d+/i;
-    }
-
-    return $i_descr;
-}
-
-sub i_ignore {
-    my $foundry = shift;
-    my $i_type  = $foundry->i_type();
-
-    my %i_ignore = ();
-
-    foreach my $iid ( keys %$i_type ) {
-        my $type = $i_type->{$iid} || '';
-        $i_ignore{$iid}++
-
-            # 33 is the console port
-            if $type =~ /(loopback|propvirtual|other|cpu|33)/i;
-    }
-    return \%i_ignore;
-}
-
-sub os {
-    return 'foundry';
-}
-
-sub vendor {
-    return 'foundry';
-}
-
-# this hangs on a edgeiron24g
-# TODO: check by devicetype and deferr to SUPER if not bad device
-sub stp_p_state { return; }
-
-1;
-__END__
-
-=head1 NAME
-
-SNMP::Info::Layer2::Foundry - SNMP Interface to Foundry FastIron Network
-Devices
-
-=head1 AUTHOR
-
-Max Baker
-
-=head1 SYNOPSIS
-
-This module is Deprecated.  Please use Layer3::Foundry instead.
-
- # Let SNMP::Info determine the correct subclass for you. 
- my $foundry = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 1
-                        ) 
-    or die "Can't connect to DestHost.\n";
-
- my $class = $foundry->class();
-
- print "SNMP::Info determined this device to fall under subclass : $class\n";
-
-=head1 DESCRIPTION
-
-This module is Deprecated.  Please use Layer3::Foundry instead.
-
-This module provides support for Foundry EdgeIron Switches
-
-=head2 Inherited Classes
-
-=over
-
-=item SNMP::Info::Layer2
-
-=item SNMP::Info::FDP
-
-=back
-
-=head2 Required MIBs
-
-=over
-
-=item F<FOUNDRY-SN-ROOT-MIB>
-
-=item Inherited Classes' MIBs
-
-See classes listed above for their required MIBs.
-
-=back
-
-=head1 GLOBALS
-
-These are methods that return scalar value from SNMP
-
-=over
-
-=item $foundry->model()
-
-Returns model type.
-
-=item $foundry->vendor()
-
-Returns 'foundry'
-
-=item $foundry->os()
-
-Returns 'foundry'
-
-=item $foundry->os_ver()
-
-Returns the software version
-
-=item $foundry->serial()
-
-Returns the serial number
-
-=back
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::FDP
-
-See documentation in L<SNMP::Info::FDP/"GLOBALS"> for details.
-
-=head1 TABLE METHODS
-
-These are methods that return tables of information in the form of a reference
-to a hash.
-
-=head2 Overrides
-
-=over
-
-=item $foundry->interfaces()
-
-Returns reference to hash of interface names to iids.
-
-=item $foundry->i_ignore()
-
-Returns reference to hash of interfaces to be ignored.
-
-Ignores interfaces with descriptions of  tunnel,loopback,null 
-
-=item $foundry->i_duplex()
-
-Returns reference to hash of interface link duplex status. 
-
-Crosses $foundry->sw_duplex() with $foundry->sw_index()
-
-=item $foundry->i_duplex_admin()
-
-Returns reference to hash of interface administrative duplex status. 
-
-=item $foundry->stp_p_state()
-
-"The port's current state as defined by application of the Spanning Tree
-Protocol.
-
-Skipped if device is an EdgeIron 24G due to reports of hangs.
-
-(C<dot1dStpPortState>)
-
-=item $foundry->i_vlan()
-
-Returns a mapping between C<ifIndex> and the PVID or default VLAN.
-
-=back
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::FDP
-
-See documentation in L<SNMP::Info::FDP/"TABLE METHODS"> for details.
-
-=cut

Info/Layer2/HP.pm

@@ -38,21 +38,28 @@ use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
 use SNMP::Info::LLDP;
 use SNMP::Info::CDP;
+use SNMP::Info::Aggregate;
 
-@SNMP::Info::Layer2::HP::ISA
-    = qw/SNMP::Info::Layer3 SNMP::Info::MAU SNMP::Info::LLDP
-    SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::HP::ISA = qw/
+    SNMP::Info::Aggregate
+    SNMP::Info::Layer3 
+    SNMP::Info::MAU 
+    SNMP::Info::LLDP
+    SNMP::Info::CDP 
+    Exporter
+/;
 @SNMP::Info::Layer2::HP::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
     %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::Aggregate::MIBS,
     'RFC1271-MIB'    => 'logDescription',
     'HP-ICF-OID'     => 'hpSwitch4000',
     'STATISTICS-MIB' => 'hpSwitchCpuStat',
@@ -69,6 +76,7 @@ $VERSION = '2.11';
     %SNMP::Info::MAU::GLOBALS,
     %SNMP::Info::LLDP::GLOBALS,
     %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::Aggregate::GLOBALS,
     'serial1'      => 'entPhysicalSerialNum.1',
     'serial2'      => 'hpHttpMgSerialNumber.0',
     'hp_cpu'       => 'hpSwitchCpuStat.0',
@@ -87,6 +95,7 @@ $VERSION = '2.11';
     %SNMP::Info::MAU::FUNCS,
     %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::Aggregate::FUNCS,
     'i_type2'   => 'ifType',
 
     # RFC1271
@@ -112,6 +121,7 @@ $VERSION = '2.11';
     %SNMP::Info::MAU::MUNGE,
     %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::Aggregate::MUNGE,
     'c_id'   => \&munge_hp_c_id,
 );
 
@@ -167,6 +177,10 @@ $VERSION = '2.11';
     'J4905A' => '3400cl-24G',
     'J4815A' => '3324XL',
     'J4851A' => '3124',
+    'J9729A' => '2920-48G-PoE+',
+    'J9728A' => '2920-48G',
+    'J9727A' => '2920-24G-PoE+',
+    'J9726A' => '2920-24G',
     'J9562A' => '2915-8G-PoE',
     'J9148A' => '2910al-48G-PoE+',
     'J9147A' => '2910al-48G',
@@ -178,26 +192,30 @@ $VERSION = '2.11';
     'J4903A' => '2824',
     'J9022A' => '2810-48G',
     'J9021A' => '2810-24G',
+    'J4899C' => '2650C',
     'J8165A' => '2650-PWR',
     'J4899B' => '2650-CR',
-    'J4899C' => '2650C',
     'J4899A' => '2650',
+    'J4900C' => '2626C',
     'J8164A' => '2626-PWR',
     'J4900B' => '2626-CR',
-    'J4900C' => '2626C',
     'J4900A' => '2626',
     'J9627A' => '2620-48-PoE+',
-    'J9624A' => '2620-48',
-    'J9624A' => '2620-24-PPoE+',
+    'J9626A' => '2620-48',
     'J9625A' => '2620-24-PoE+',
+    'J9624A' => '2620-24-PPoE+',
     'J9623A' => '2620-24',
     'J9565A' => '2615-8-PoE',
     'J9089A' => '2610-48-PWR',
     'J9088A' => '2610-48',
-    'J9087A' => '2610-24-PWR',
     'J9086A' => '2610-24/12PWR',
+    'J9087A' => '2610-24-PWR',
     'J9085A' => '2610-24',
     'J8762A' => '2600-8-PWR',
+    'J9772A' => '2530-48G-PoE+',
+    'J9775A' => '2530-48G',
+    'J9773A' => '2530-24G-PoE+',
+    'J9776A' => '2530-24G',
     'J4813A' => '2524',
     'J9298A' => '2520G-8-PoE',
     'J9299A' => '2520G-24-PoE',
@@ -413,108 +431,6 @@ sub _sensor {
     return $result;
 }
 
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $hp = shift;
-
-    return $hp->hasLLDP() || $hp->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $cdp  = $hp->SUPER::c_ip($partial) || {};
-    my $lldp = $hp->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_if($partial)     || {};
-    my $cdp  = $hp->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_port($partial)     || {};
-    my $cdp  = $hp->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_id($partial)     || {};
-    my $cdp  = $hp->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
 sub munge_hp_c_id {
     my ($v) = @_;
     if ( length(unpack('H*', $v)) == 12 ){
@@ -528,30 +444,6 @@ sub munge_hp_c_id {
     }
 }
 
-sub c_platform {
-    my $hp      = shift;
-    my $partial = shift;
-
-    my $lldp = $hp->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $hp->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
 # POWER-ETHERNET-MIB doesn't define a mapping of its
 # "module"/"port" index to ifIndex.  Different vendors
 # do this in different ways.
@@ -642,6 +534,8 @@ sub set_i_vlan_tagged {
     return;
 }
 
+sub agg_ports { return agg_ports_ifstack(@_) }
+
 1;
 __END__
 
@@ -759,7 +653,7 @@ Returns bytes of used memory
 Returns the model number of the HP Switch.  Will translate between the HP Part
 number and the common model number with this map :
 
-%MODEL_MAP = (
+ %MODEL_MAP = (
     'J8131A' => 'WAP-420-WW',
     'J8130A' => 'WAP-420-NA',
     'J8133A' => 'AP520WL',
@@ -828,7 +722,7 @@ number and the common model number with this map :
     'J4900C' => '2626C',
     'J4900A' => '2626',
     'J9627A' => '2620-48-PoE+',
-    'J9624A' => '2620-48',
+    'J9626A' => '2620-48',
     'J9624A' => '2620-24-PPoE+',
     'J9625A' => '2620-24-PoE+',
     'J9623A' => '2620-24',
@@ -856,7 +750,7 @@ number and the common model number with this map :
     'J9450A' => '1810G-24',
     'J9029A' => '1800-8G',
     'J9028A' => '1800-24G',
-);
+ );
 
 =item $hp->os()
 
@@ -902,12 +796,12 @@ Power supply 2 status
 =item $hp->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("hpicfPoePethPsePortPower")
+(C<hpicfPoePethPsePortPower>)
 
 =item $hp->stp_ver()
 
 Returns what version of STP the device is running.
-("hpicfBridgeRstpForceVersion" with fallback to inherited stp_ver())
+(C<hpicfBridgeRstpForceVersion> with fallback to inherited stp_ver())
 
 =back
 
@@ -930,7 +824,7 @@ to a hash.
 
 =head2 Overrides
 
-=over
+=over 4
 
 =item $hp->interfaces() 
 
@@ -946,7 +840,8 @@ Returns reference to hash of IIDs to admin duplex setting.
 
 =item $hp->vendor_i_type()
 
-Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
 
 =item $hp->i_name()
 
@@ -957,52 +852,11 @@ Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()
 Returns reference to hash of power Ethernet port table entries map back to
 interface index (c<ifIndex>)
 
-=back
+=item C<agg_ports>
 
-=head2 Topology information
-
-Based upon the firmware version HP devices may support Cisco Discovery
-Protocol (CDP), Link Layer Discovery Protocol (LLDP), or both.  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
-
-=over
-
-=item $hp->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=item $hp->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $hp->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $hp->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $hp->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $hp->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
 
 =back
 
@@ -1041,4 +895,6 @@ operations.
 
 =item set_i_vlan_tagged()
 
+=back
+
 =cut

Info/Layer2/HP4000.pm

@@ -44,7 +44,7 @@ use SNMP::Info::CDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -376,6 +376,20 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $hp  = shift;
+    my $partial = shift;
+
+    my $vlans = $hp->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    
+    return $i_vlan_membership;
+}
+
 sub set_i_vlan {
     my $hp = shift;
     my $rv;
@@ -652,7 +666,8 @@ Returns reference to hash of IIDs to admin duplex setting.
 
 =item $hp->vendor_i_type()
 
-Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
 
 =item $hp->i_name()
 
@@ -679,6 +694,12 @@ It is the union of tagged, untagged, and auto ports.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $hp->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $hp->v_index()
 
 Returns VLAN IDs
@@ -718,4 +739,6 @@ operations.
 
 =item set_i_vlan_tagged()
 
+=back
+
 =cut

Info/Layer2/HPVC.pm

@@ -33,17 +33,19 @@ package SNMP::Info::Layer2::HPVC;
 use strict;
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::LLDP;
 
 @SNMP::Info::Layer2::HPVC::ISA
-    = qw/SNMP::Info::Layer2 Exporter/;
+    = qw/SNMP::Info::Layer2 SNMP::Info::LLDP Exporter/;
 @SNMP::Info::Layer2::HPVC::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     'HPVC-MIB'       => 'vcDomainName',
     'CPQSINFO-MIB'   => 'cpqSiSysSerialNum',
     'HPVCMODULE-MIB' => 'vcModuleDomainName',
@@ -51,6 +53,7 @@ $VERSION = '2.11';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
     'serial1'      => 'cpqSiSysSerialNum.0',
     'os_ver'       => 'cpqHoSWRunningVersion.1',
     'os_bin'       => 'cpqHoFwVerVersion.1',
@@ -59,12 +62,14 @@ $VERSION = '2.11';
 
 %FUNCS = (
     %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
     
 );
 
 %MUNGE = (
     # Inherit all the built in munging
     %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
 );
 
 
@@ -89,7 +94,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::HPVC - SNMP Interface to HP VirtualConnect Switches
+SNMP::Info::Layer2::HPVC - SNMP Interface to HP Virtual Connect Switches
 
 =head1 AUTHOR
 
@@ -113,7 +118,7 @@ Jeroen van Ingen
 =head1 DESCRIPTION
 
 Provides abstraction to the configuration information obtainable from a 
-HP VirtualConnect Switch via SNMP. 
+HP Virtual Connect Switch via SNMP. 
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -150,7 +155,7 @@ These are methods that return scalar value from SNMP
 
 =item $hp->os()
 
-Returns hpvc
+Returns C<'hpvc'>
 
 =item $hp->os_bin()
 

Info/Layer2/Kentrox.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/N2270.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,        %SNMP::Info::Bridge::MIBS,

Info/Layer2/NAP222x.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::IEEE802dot11::MIBS,

Info/Layer2/Netgear.pm

@@ -40,14 +40,19 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
+
+# This will be filled in with the device's index into the EntPhysicalEntry
+# table by the serial() function.
+our $index = undef;
 
 %MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::LLDP::MIBS, );
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
-    ng_serial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
-    ng_osver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
+    ng_fsosver   => '.1.3.6.1.4.1.4526.11.11.1.0',
+    ng_gsmserial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
+    ng_gsmosver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
 );
 
 %FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::LLDP::FUNCS, );
@@ -62,92 +67,91 @@ sub os {
     return 'netgear';
 }
 
-# Wish the OID-based method worked, but netgear scatters
-# the sysObjectID values across all the device MIBs, and
-# makes the device MIBs state secrets.
-# They seem to set sysDescr to the model number, though,
-# so we'll use that.
+# We will attempt to use Entity-MIB if present.  In that case, we will
+# also set the shared variable $index, which is used by other functions
+# to index within Entity-MIB tables. This assumes, of course, that there
+# is only one serial number (entPhysicalSerialNum) present in the table.
+sub serial {
+    my $netgear = shift;
+    my $serial = undef;
+    
+    my $e_serial = $netgear->e_serial();
+    if (defined($e_serial)) { # This unit sports the Entity-MIB
+        # Find entity table entry for this unit
+        foreach my $e ( keys %$e_serial ) {
+            if (defined ($e_serial->{$e}) and $e_serial->{$e} !~ /^\s*$/) {
+                $index = $e;
+                last;
+            }
+        }
+        return $e_serial->{$index} if defined $index;
+    }
+
+    # Without Enitity-MIB, we've got to work our way through a bunch of
+    # different locales...
+    return $netgear->ng_gsmserial() if defined $netgear->model and $netgear->model =~ m/GSM\d/i;;
+    return 'none';
+}
+
+# If device supports Entity-MIB, index into that to divine model and
+# hardware version, otherwise default to sysDescr.
 sub model {
     my $netgear = shift;
+    if (defined($index)) {
+        my $model   = $netgear->e_descr();
+        my $e_hwver = $netgear->e_hwver();
+
+        $model = "$model->{$index} $e_hwver->{$index}";
+        return $model;
+    }
     return $netgear->description();
 }
 
-#
-# This is model-dependent.  Some netgear brand devices don't implement
-# the bridge MIB forwarding table, so we use the Q-BRIDGE-MIB forwarding
-# table.  Fall back to the orig functions if the qb versions don't
-# return anything.
-sub fw_mac {
+# ifDescr is the same for all interfaces in a class, but the ifName is
+# unique, so let's use that for port name.  If all else fails, 
+# concatentate ifDesc and ifIndex.
+sub interfaces {
     my $netgear = shift;
-    my $ret     = $netgear->qb_fw_mac();
-    $ret = $netgear->orig_fw_mac() if ( !defined($ret) );
-    return $ret;
-}
+    my $partial = shift;
 
-sub fw_port {
-    my $netgear = shift;
-    my $ret     = $netgear->qb_fw_port();
-    $ret = $netgear->orig_fw_port() if ( !defined($ret) );
-    return $ret;
+    my $interfaces = $netgear->i_index($partial)       || {};
+    my $i_descr    = $netgear->i_description($partial) || {};
+    my $i_name     = $netgear->i_name($partial);
+    my $i_isset    = ();
+    # Replace the description with the ifName field, if set
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        if (defined $name and $name !~ /^\s*$/) {
+            $interfaces->{$iid} = $name;
+            $i_isset->{$iid} = 1;
+        }
+    }
+    # Replace the Index with the ifDescr field, appended with index
+    # number, to deal with devices with non-unique ifDescr.
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid} . '-' . $iid;
+        next unless defined $port;
+        next if (defined $i_isset->{$iid} and $i_isset->{$iid} == 1);
+        $interfaces->{$iid} = $port;
+    }
+
+    return $interfaces;
 }
 
 # these seem to work for GSM models but not GS
 # https://sourceforge.net/tracker/?func=detail&aid=3085413&group_id=70362&atid=527529
 sub os_ver {
-    my $self = shift;
-    return if $self->model and $self->model =~ m/GS\d/i;
-    return $self->ng_osver();
-}
-
-sub serial {
-    my $self = shift;
-    return if $self->model and $self->model =~ m/GS\d/i;
-    return $self->ng_serial();
-}
-
-#  Use LLDP
-
-sub hasCDP {
     my $netgear = shift;
-    return $netgear->hasLLDP();
+    my $serial  = $netgear->serial(); # Make sure that index gets primed
+    if (defined($index)) {
+        my $os_ver  = $netgear->e_swver();
+        return $os_ver->{$index} if defined $os_ver;
+    }
+    return $netgear->ng_gsmosver() if defined  $netgear->model and $netgear->model =~ m/GSM\d/i;
+    return $netgear->ng_fsosver() if defined  $netgear->model and $netgear->model =~ m/FS\d/i;
 }
 
-sub c_ip {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    return $netgear->lldp_ip($partial);
-}
-
-sub c_if {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    return $netgear->lldp_if($partial);
-}
-
-sub c_port {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    return $netgear->lldp_port($partial);
-}
-
-sub c_id {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    return $netgear->lldp_id($partial);
-}
-
-sub c_platform {
-    my $netgear = shift;
-    my $partial  = shift;
-
-    return $netgear->lldp_rem_sysdesc($partial);
-}
-
-
 1;
 
 __END__
@@ -158,8 +162,8 @@ SNMP::Info::Layer2::Netgear - SNMP Interface to Netgear switches
 
 =head1 AUTHOR
 
-Bill Fenner and Zoltan Erszenyi, 
-Hacked in LLDP support from Baystack.pm by 
+ Bill Fenner and Zoltan Erszenyi, 
+ Hacked in LLDP support from Baystack.pm by 
  Nic Bernstein <nic@onlight.com>
 
 =head1 SYNOPSIS
@@ -188,6 +192,7 @@ inherited methods.
 =over
 
 =item SNMP::Info::Layer2
+=item SNMP::Info::Entity
 =item SNMP::Info::LLDP
 
 =back
@@ -201,6 +206,8 @@ inherited methods.
 MIBs listed in L<SNMP::Info::Layer2/"Required MIBs"> and its inherited
 classes.
 
+See L<SNMP::Info::Entity/"Required MIBs"> for its MIB requirements.
+
 See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
 
 =back
@@ -223,7 +230,8 @@ Returns 'netgear'
 
 =item $netgear->model()
 
-Returns description()
+Returns concatenation of $e_model and $e_hwver if Entity MIB present, 
+otherwise returns description()
 
 =item $netgear->os_ver()
 
@@ -231,7 +239,8 @@ Returns OS Version.
 
 =item $netgear->serial()
 
-Returns Serial Number.
+Returns Serial Number if available (older FS switches have no accessible
+serial number).
 
 =back
 
@@ -239,6 +248,10 @@ Returns Serial Number.
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::LLDP
 
 See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
@@ -252,65 +265,9 @@ a reference to a hash.
 
 =over
 
-=item $netgear->fw_mac()
+=item $netgear->interfaces()
 
-Returns reference to hash of forwarding table MAC Addresses.
-
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
-
-=item $netgear->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid)
-
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
-
-=back
-
-=head2 Topology information
-
-Based upon the software version devices may support Link Layer Discovery 
-Protocol (LLDP).
-
-=over
-
-=item $netgear->hasCDP()
-
-Returns true if the device is running LLDP.
-
-=item $netgear->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $netgear->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-LLDP device in between two or
-more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $netgear->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $netgear->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $netgear->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+Uses the i_name() field.
 
 =back
 
@@ -318,4 +275,12 @@ Returns reference to hash.  Key: iid Value: Remote Device Type
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =cut

Info/Layer2/Orinoco.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/Ubiquiti.pm

@@ -0,0 +1,177 @@
+# SNMP::Info::Layer2::Ubiquiti
+# $Id$
+#
+
+package SNMP::Info::Layer2::Ubiquiti;
+
+use strict;
+use Exporter;
+use SNMP::Info::IEEE802dot11;
+use SNMP::Info::Layer2;
+
+@SNMP::Info::Layer2::Ubiquiti::ISA
+    = qw/SNMP::Info::IEEE802dot11 SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Ubiquiti::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::IEEE802dot11::MIBS,
+
+);
+
+%GLOBALS
+    = ( %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::IEEE802dot11::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
+
+);
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::IEEE802dot11::MUNGE, );
+
+sub os {
+    return 'Ubiquiti';
+}
+
+sub os_ver {
+    my $dot11 = shift;
+
+    my $versions = $dot11->dot11_prod_ver();
+
+    foreach my $iid ( keys %$versions ) {
+        my $ver = $versions->{$iid};
+        next unless defined $ver;
+	return $ver;
+        if ( $ver =~ /([\d\.]+)/ ) {
+            return $1;
+        }
+    }
+
+    return;
+}
+
+sub vendor {
+    return 'Ubiquiti Networks, Inc.';
+}
+
+sub model {
+    my $dot11 = shift;
+
+    my $names = $dot11->dot11_prod_name();
+
+    foreach my $iid ( keys %$names ) {
+        my $prod = $names->{$iid};
+        next unless defined $prod;
+        return $prod;
+    }
+    return;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::Ubiquiti - SNMP Interface to Ubiquiti Access Points
+
+=head1 AUTHOR
+
+Max Kosmach
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ubnt = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $ubnt->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from
+Ubiquiti Access Point through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $ubnt = new SNMP::Info::Layer2::Ubiquiti(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=item SNMP::Info::IEEE802dot11
+
+=back
+
+=head2 Required MIBs
+
+None.
+
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ubnt->vendor()
+
+Returns 'Ubiquiti Networks, Inc.'
+
+=item $ubnt->model()
+
+Returns the model extracted from C<dot11manufacturerProductName>.
+
+=item $ubnt->os()
+
+Returns 'Ubiquiti'
+
+=item $ubnt->os_ver()
+
+Returns the software version extracted from C<dot11manufacturerProductVersion>.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/ZyXEL_DSLAM.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );

Info/Layer3.pm

@@ -51,7 +51,7 @@ use SNMP::Info::AdslLine;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -132,11 +132,11 @@ $VERSION = '2.11';
     'bgp_peer_out_upd'        => 'bgpPeerOutUpdates',
 
     # IP-MIB Net to Physical Table (ARP Cache)
-    'n2p_paddr' => 'ipNetToPhysicalPhysAddress',
+    'n2p_paddr'      => 'ipNetToPhysicalPhysAddress',
     'n2p_lastupdate' => 'ipNetToPhysicalLastUpdated',
-    'n2p_ptype' => 'ipNetToPhysicalType',
-    'n2p_pstate' => 'ipNetToPhysicalState',
-    'n2p_pstatus' => 'ipNetToPhysicalRowStatus',
+    'n2p_ptype'      => 'ipNetToPhysicalType',
+    'n2p_pstate'     => 'ipNetToPhysicalState',
+    'n2p_pstatus'    => 'ipNetToPhysicalRowStatus',
 
 );
 
@@ -152,7 +152,7 @@ $VERSION = '2.11';
     %SNMP::Info::IPv6::MUNGE,
     'old_at_paddr' => \&SNMP::Info::munge_mac,
     'at_paddr'     => \&SNMP::Info::munge_mac,
-    'n2p_paddr' => \&SNMP::Info::munge_mac,
+    'n2p_paddr'    => \&SNMP::Info::munge_mac,
 );
 
 # Method OverRides
@@ -163,12 +163,12 @@ sub root_ip {
     my $router_ip = $l3->router_ip();
     my $ospf_ip   = $l3->ospf_ip();
 
-    # if the router ip exists and is a route advertised by the device we prefer
-    # it over the others
+   # if the router ip exists and is a route advertised by the device we prefer
+   # it over the others
     return $router_ip
         if (( defined $router_ip )
         and ( $router_ip ne '0.0.0.0' )
-        and ( grep { $ospf_ip->{$_} eq $router_ip } (keys %$ospf_ip))
+        and ( grep { $ospf_ip->{$_} eq $router_ip } ( keys %$ospf_ip ) )
         and ( $l3->snmp_connect_ip($router_ip) ) );
 
     # return the first one found here (should be only one)
@@ -185,38 +185,29 @@ sub root_ip {
     return;
 }
 
-sub i_ignore {
-    my $l3      = shift;
-    my $partial = shift;
-
-    my $interfaces = $l3->interfaces($partial) || {};
-
-    my %i_ignore;
-    foreach my $if ( keys %$interfaces ) {
-
-        # lo -> cisco aironet 350 loopback
-        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|null)/i ) {
-            $i_ignore{$if}++;
-        }
-    }
-    return \%i_ignore;
-}
-
 sub serial {
     my $l3 = shift;
 
-    my $serial1  = $l3->serial1();
-    my $e_descr  = $l3->e_descr() || {};
-    my $e_serial = $l3->e_serial() || {};
+    my $serial1 = $l3->serial1();
+    my $e_parent = $l3->e_parent() || {};
 
-    my $serial2 = $e_serial->{1} || undef;
-    my $chassis = $e_descr->{1}  || undef;
+    foreach my $iid ( keys %$e_parent ) {
+        my $parent = $e_parent->{$iid};
+        if ( $parent eq '0' ) {
+            my $serial = $l3->e_serial($iid);
+            if ( $serial ) {
+                return $serial->{$iid};
+            }
+            else {
+                my $descr = $l3->e_descr($iid);
+                if ( $descr and $descr =~ /serial#?:\s*([a-z0-9]+)/i )
+                {
+                    return $1;
+                }
+            }
+        }
+    }
 
-    # precedence
-    #   serial2,chassis parse,serial1
-    return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
-    return $1
-        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
     return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
     return;
@@ -293,32 +284,37 @@ sub interfaces {
     my $l3      = shift;
     my $partial = shift;
 
-    my $interfaces   = $l3->i_index($partial);
-    my $descriptions = $l3->i_description($partial);
+    my $interfaces = $l3->i_index($partial);
+    my $i_descr    = $l3->i_description($partial);
 
-    my %interfaces = ();
-    foreach my $iid ( keys %$interfaces ) {
-        my $desc = $descriptions->{$iid};
-        next unless defined $desc;
-
-        $interfaces{$iid} = $desc;
+    # Check for duplicates in ifDescr, if so uniquely identify by adding
+    # ifIndex to repeated values
+    my %seen;
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid};
+        next unless defined $port;
+        if ( $seen{$port}++ ) {
+            $interfaces->{$iid} = sprintf( "%s (%d)", $port, $iid );
+        }
+        else {
+            $interfaces->{$iid} = $port;
+        }
     }
-
-    return \%interfaces;
+    return $interfaces;
 }
 
 sub vendor {
     my $l3 = shift;
 
     my $descr = $l3->description();
-    my $id = $l3->id();
+    my $id    = $l3->id();
 
     # .1.3.6.1.4.1.9.1 is the CISCO-PRODUCTS-MIB
     # .1.3.6.1.4.1.9.9.368.4 is an old tree that Cisco CSSs were numbered from
-    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
-    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
+    return 'cisco' if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
+    return 'cisco' if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
     return 'cisco'   if ( $descr =~ /(cisco|\bios\b)/i );
-    return 'foundry' if ( $descr =~ /foundry/i );
+    return 'brocade' if ( $descr =~ /foundry/i );
 
     return 'unknown';
 
@@ -531,12 +527,6 @@ name.
 
 Only returns those iids that have a description listed in $l3->i_description()
 
-=item $l3->i_ignore()
-
-Returns reference to hash.  Creates a key for each IID that should be ignored.
-
-Currently looks for tunnel,loopback,lo,null from $l3->interfaces()
-
 =item $l3->i_name()
 
 Returns reference to hash of iid to human set name. 

Info/Layer3/Aironet.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/AlcatelLucent.pm

@@ -34,20 +34,28 @@ use strict;
 use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
+use SNMP::Info::AMAP;
+# Use LLDP
+# (or at least try.  The versions I've seen have two problems:
+# 1. they report ifIndex values as 'local'; we don't support ifIndex
+#    but *could*
+# 2. They report 0.0.0.0 as the management address
+# )
 use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::AMAP SNMP::Info::LLDP
+    SNMP::Info::MAU SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer3::AlcatelLucent::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
     %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::AMAP::MIBS,
     'ALCATEL-IND1-DEVICES'     => 'familyOmniSwitch7000',
     'ALCATEL-IND1-CHASSIS-MIB' => 'chasEntPhysOperStatus',
     'ALU-POWER-ETHERNET-MIB'   => 'pethPsePortDetectionStatus',
@@ -64,17 +72,17 @@ delete $MIBS{'POWER-ETHERNET-MIB'};
 
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS, %SNMP::Info::AMAP::GLOBALS,
 );
 
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS, %SNMP::Info::MAU::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS, %SNMP::Info::AMAP::FUNCS,
 );
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE, %SNMP::Info::MAU::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE, %SNMP::Info::AMAP::MUNGE,
 );
 
 # use MAU-MIB for admin. duplex and admin. speed
@@ -190,21 +198,6 @@ sub interfaces {
     return $alu->orig_i_name($partial);
 }
 
-# Use Q-BRIDGE-MIB
-sub fw_mac {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->qb_fw_port($partial);
-}
-
 # Work around buggy bp_index in 6.3.1.871.R01 and 6.3.1.975.R01
 sub bp_index {
     my $alu     = shift;
@@ -285,53 +278,6 @@ sub bp_index {
 #    return $i_vlan;
 #}
 
-# Use LLDP
-# (or at least try.  The versions I've seen have two problems:
-# 1. they report ifIndex values as 'local'; we don't support ifIndex
-#    but *could*
-# 2. They report 0.0.0.0 as the management address
-# )
-sub hasCDP {
-    my $alu = shift;
-
-    return $alu->hasLLDP();
-}
-
-sub c_ip {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_ip($partial);
-}
-
-sub c_if {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_if($partial);
-}
-
-sub c_port {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_port($partial);
-}
-
-sub c_id {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_id($partial);
-}
-
-sub c_platform {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->lldp_rem_sysdesc($partial);
-}
-
 # Power-Ethernet ifIndex mapping.  I've only seen this from a
 # fixed-config single-module system, so this is only a plausible
 # guess as to the mapping on a stack or modular system.
@@ -428,10 +374,6 @@ These are methods that return scalar value from SNMP
 
     Returns 'alcatel-lucent'
 
-=item $alu->hasCDP()
-
-    Returns whether LLDP is enabled.
-
 =item $alu->model()
 
 Tries to reference $alu->id() to one of the product MIBs listed above
@@ -488,40 +430,12 @@ to a hash.
 Returns interface name from C<ifName>, since the default return value
 of C<ifDescr> includes the OS version.
 
-=item $alu->fw_mac()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $alu->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
 =item $alu->bp_index()
 
 Work around various bugs in the F<BRIDGE-MIB> and
 F<Q-BRIDGE-MIB> implementations, by returning both
 C<ifIndex> and C<dot1dBasePort> mappings to C<ifIndex> values.
 
-=item $alu->c_id()
-
-Returns LLDP information.
-
-=item $alu->c_if()
-
-Returns LLDP information.
-
-=item $alu->c_ip()
-
-Returns LLDP information.
-
-=item $alu->c_platform()
-
-Returns LLDP information.
-
-=item $alu->c_port()
-
-Returns LLDP information.
-
 =item $alu->i_duplex_admin()
 
 Returns info from F<MAU-MIB>

Info/Layer3/AlteonAD.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -66,6 +66,10 @@ $VERSION = '2.11';
     'new_tftp_result' => 'ALTEON_CHEETAH_SWITCH_MIB__agTftpLastActionStatus',
     'old_ip_max'      => 'ALTEON_TS_NETWORK_MIB__ipInterfaceTableMax',
     'new_ip_max'      => 'ALTEON_CHEETAH_NETWORK_MIB__ipInterfaceTableMax',
+    'fan'             => 'ALTEON_CHEETAH_SWITCH_MIB__hwFanStatus',
+    'old_ps1_stat'    => 'ALTEON_TIGON_SWITCH_MIB__hwPowerSupplyStatus',
+    'old_ps2_stat'    => 'ALTEON_TIGON_SWITCH_MIB__hwRedundantPSStatus',
+    'new_ps_stat'     => 'ALTEON_CHEETAH_SWITCH_MIB__hwPowerSupplyStatus',
 );
 
 %FUNCS = (
@@ -132,7 +136,7 @@ sub model {
 
     return $id unless defined $model;
 
-    $model =~ s/^aceswitch//;
+    $model =~ s/^(aceswitch|aws|ods)//;
     $model =~ s/^acedirector/AD/;
     $model =~ s/^(copper|fiber)Module/BladeCenter GbESM/;
 
@@ -140,7 +144,7 @@ sub model {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'radware';
 }
 
 sub os {
@@ -155,6 +159,36 @@ sub os_ver {
     return $version;
 }
 
+sub ps1_status {
+    my $alteon = shift;
+    my $old_ps = $alteon->old_ps1_stat();
+    my $new_ps = $alteon->new_ps_stat();
+    
+    return $old_ps if $old_ps;
+    
+    if ($new_ps) {
+        return 'ok' if ($new_ps eq 'singlePowerSupplyOk');
+        return 'failed' if ($new_ps eq 'firstPowerSupplyFailed');
+    }
+    
+    return;
+}
+
+sub ps2_status {
+    my $alteon = shift;
+    my $old_ps = $alteon->old_ps2_stat();
+    my $new_ps = $alteon->new_ps_stat();
+    
+    return $old_ps if $old_ps;
+    
+    if ($new_ps) {
+        return 'ok' if ($new_ps eq 'doublePowerSupplyOk');
+        return 'failed' if ($new_ps eq 'secondPowerSupplyFailed');
+    }
+
+    return;
+}
+
 sub interfaces {
     my $alteon       = shift;
     my $interfaces   = $alteon->i_index();
@@ -174,6 +208,7 @@ sub interfaces {
         # varies by switch model
         elsif ( defined $ip_max and $iid > $ip_max ) {
             $desc = ( $iid % $ip_max );
+            $desc = 'mgmt' if $desc == 231;
         }
         $interfaces{$iid} = $desc;
     }
@@ -207,39 +242,48 @@ sub i_duplex {
 sub i_duplex_admin {
     my $alteon = shift;
 
-    my $ag_pref = $alteon->new_ag_p_cfg_pref()
+    my $ag_pref 
+        = $alteon->new_ag_p_cfg_pref()
         || $alteon->old_ag_p_cfg_pref()
         || {};
-    my $ag_fe_auto = $alteon->new_ag_p_cfg_fe_auto()
+    my $ag_fe_auto 
+        = $alteon->new_ag_p_cfg_fe_auto()
         || $alteon->old_ag_p_cfg_fe_auto()
         || {};
-    my $ag_fe_mode = $alteon->new_ag_p_cfg_fe_mode()
+    my $ag_fe_mode 
+        = $alteon->new_ag_p_cfg_fe_mode()
         || $alteon->old_ag_p_cfg_fe_mode()
         || {};
-    my $ag_ge_auto = $alteon->new_ag_p_cfg_ge_auto()
+    my $ag_ge_auto 
+        = $alteon->new_ag_p_cfg_ge_auto()
         || $alteon->old_ag_p_cfg_ge_auto()
         || {};
-    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
+    my $ip_max  = $alteon->new_ip_max() || $alteon->old_ip_max();
+    my $i_speed = $alteon->i_speed()    || {};
 
     my %i_duplex_admin;
-    foreach my $if ( keys %$ag_pref ) {
-        my $pref = $ag_pref->{$if};
-        next unless defined $pref;
+    foreach my $if ( keys %$ag_ge_auto ) {
+        my $pref    = $ag_pref->{$if}    || '';
+        my $speed   = $i_speed->{$if}    || '';
+        my $ge_auto = $ag_ge_auto->{$if} || '';
+        my $fe_auto = $ag_fe_auto->{$if} || '';
+        my $fe_mode = $ag_fe_mode->{$if} || '';
 
-        my $string = 'other';
-        if ( $pref =~ /gigabit/i ) {
-            my $ge_auto = $ag_ge_auto->{$if};
-            $string = 'full' if ( $ge_auto =~ /off/i );
-            $string = 'auto' if ( $ge_auto =~ /on/i );
+        # Default to auto
+        my $string = 'auto';
+
+        if ( $ge_auto =~ /off/i
+            && ( $pref =~ /gigabit/i || $speed eq '1.0 Gbps' ) )
+        {
+            $string = 'full';
         }
-        elsif ( $pref =~ /fast/i ) {
-            my $fe_auto = $ag_fe_auto->{$if};
-            my $fe_mode = $ag_fe_mode->{$if};
+        if ( $fe_auto =~ /off/i
+            && ( $pref =~ /fast/i || $speed =~ /100?\sMbps/ ) )
+        {
             $string = 'half'
-                if ( $fe_mode =~ /half/i and $fe_auto =~ /off/i );
+                if ( $fe_mode =~ /half/i );
             $string = 'full'
-                if ( $fe_mode =~ /full/i and $fe_auto =~ /off/i );
-            $string = 'auto' if $fe_auto =~ /on/i;
+                if ( $fe_mode =~ /full/i );
         }
 
         my $idx;
@@ -341,6 +385,20 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $alteon  = shift;
+    my $partial = shift;
+
+    my $vlans = $alteon->i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    
+    return $i_vlan_membership;
+}
+
 # Bridge MIB does not map Bridge Port to ifIndex correctly on some code
 # versions
 sub bp_index {
@@ -365,7 +423,7 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::AlteonAD - SNMP Interface to Nortel Alteon Layer 2-7
+SNMP::Info::Layer3::AlteonAD - SNMP Interface to Radware Alteon ADC
 Switches.
 
 =head1 AUTHOR
@@ -389,8 +447,8 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Nortel Alteon Series Layer 2-7 load balancing
-switches and Nortel BladeCenter Layer2-3 GbE Switch Modules.
+Abstraction subclass for Radware Alteon Series ADC switches and
+Nortel BladeCenter Layer2-3 GbE Switch Modules.
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -438,12 +496,12 @@ These are methods that return scalar value from SNMP
 =item $alteon->model()
 
 Returns model type.  Checks $alteon->id() against the F<ALTEON-ROOT-MIB> and
-then parses out C<aceswitch>, replaces C<acedirector> with AD, and replaces
-copperModule/fiberModule with BladeCenter GbESM.
+then parses out C<aceswitch>, C<aws>, and C<ods> replaces C<acedirector>
+with AD, and replaces copperModule/fiberModule with BladeCenter GbESM.
 
 =item $alteon->vendor()
 
-Returns 'nortel'
+Returns 'radware'
 
 =item $alteon->os()
 
@@ -469,6 +527,18 @@ Returns the software version reported by C<agSoftwareVersion>
 
 (C<agTftpLastActionStatus>)
 
+=item $alteon->fan()
+
+(C<hwFanStatus>)
+
+=item $alteon->ps1_status()
+
+Returns status of primary power supply
+
+=item $alteon->ps2_status()
+
+Returns status of redundant power supply
+
 =back
 
 =head2 Globals imported from SNMP::Info::Layer3
@@ -477,8 +547,8 @@ See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
-These are methods that return tables of information in the form of a reference
-to a hash.
+These are methods that return tables of information in the form of a
+reference to a hash.
 
 =head2 Overrides
 
@@ -518,6 +588,12 @@ IDs.  These are the VLANs which are members of the egress list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $alteon->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $alteon->v_index()
 
 Returns VLAN IDs

Info/Layer3/Altiga.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3;
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE 
             $int_include_vpn $fake_idx $type_class/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
             %SNMP::Info::Layer3::MIBS,
@@ -152,10 +152,6 @@ sub os {
     return 'altiga';
 }
 
-sub hasCDP {
-    return 0;
-}
-
 # $altiga->interfaces() - Map the Interfaces to their physical names
 # Add interface number to interface name to prevent duplicate ifDescr
 # Included statically configured VPN tunnels if ($int_include_vpn)
@@ -350,10 +346,6 @@ Tries to determine OS version from the C<sysDescr.0> field. Returns version or C
 
 Combines results from C<fan1_alarm>, C<fan2_alarm>, and C<fam3_alarm> methods.
 
-=item $altiga->hasCDP()
-
-No.
-
 =item $altiga->ps1_status()
 
 Combines C<ps1_3v_alarm> and C<ps1_5v_alarm> methods.

Info/Layer3/Arista.pm

@@ -36,19 +36,25 @@ use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
 use SNMP::Info::LLDP;
+use SNMP::Info::Aggregate;
 
-@SNMP::Info::Layer3::Arista::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Arista::ISA = qw/
+    SNMP::Info::Aggregate
+    SNMP::Info::LLDP
+    SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter
+/;
 @SNMP::Info::Layer3::Arista::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
     %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::Aggregate::MIBS,
     'ARISTA-PRODUCTS-MIB' => 'aristaProducts',
 );
 
@@ -104,64 +110,28 @@ sub model {
     return $model;
 }
 
-# Use Q-BRIDGE-MIB
-
-sub fw_mac {
+# The LLDP MIB leaves it up in the air what the index means.
+# On EOS, it's a dot1d port.
+sub lldp_if {
     my $arista  = shift;
     my $partial = shift;
 
-    return $arista->qb_fw_mac($partial);
+    # We pick a column that someone else is likely to want,
+    # so that the cache means that hopefully this doesn't
+    # cause any more SNMP transactions in total.
+    my $desc     = $arista->lldp_rem_desc($partial) || {};
+    my $bp_index = $arista->bp_index() || {};
+
+    my $lldp_if = {};
+    foreach my $key ( keys %$desc ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        $lldp_if->{$key} = $bp_index->{$port};
+    }
+    return $lldp_if;
 }
 
-sub fw_port {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->qb_fw_port($partial);
-}
-
-# Use LLDP
-
-sub hasCDP {
-    my $arista = shift;
-
-    return $arista->hasLLDP();
-}
-
-sub c_ip {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_ip($partial);
-}
-
-sub c_if {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_if($partial);
-}
-
-sub c_port {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_port($partial);
-}
-
-sub c_id {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_id($partial);
-}
-
-sub c_platform {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->lldp_rem_sysdesc($partial);
-}
+sub agg_ports { return agg_ports_ifstack(@_) }
 
 1;
 __END__
@@ -198,6 +168,8 @@ Subclass for Arista Networks EOS-based devices
 
 =over
 
+=item SNMP::Info::Aggregate
+
 =item SNMP::Info::Layer3
 
 =item SNMP::Info::MAU
@@ -216,6 +188,8 @@ Subclass for Arista Networks EOS-based devices
 
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::Aggregate/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
@@ -232,10 +206,6 @@ These are methods that return scalar values from SNMP
 
     Returns 'Arista Networks, Inc.'
 
-=item $arista->hasCDP()
-
-    Returns whether LLDP is enabled.
-
 =item $arista->model()
 
 Tries to reference $arista->id() to one of the product MIBs listed above
@@ -271,34 +241,6 @@ to a hash.
 
 =over
 
-=item $arista->fw_mac()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $arista->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $arista->c_id()
-
-Returns LLDP information.
-
-=item $arista->c_if()
-
-Returns LLDP information.
-
-=item $arista->c_ip()
-
-Returns LLDP information.
-
-=item $arista->c_platform()
-
-Returns LLDP information.
-
-=item $arista->c_port()
-
-Returns LLDP information.
-
 =item $arista->i_duplex_admin()
 
 Returns info from F<MAU-MIB>
@@ -307,6 +249,16 @@ Returns info from F<MAU-MIB>
 
 Returns info from F<MAU-MIB>
 
+=item $arista->lldp_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3

Info/Layer3/BayRS.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Bridge;
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE %MODEL_MAP
     %MODID_MAP %PROCID_MAP/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -545,7 +545,7 @@ sub model {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub os {
@@ -732,6 +732,8 @@ sub i_vlan {
     return \%i_vlan;
 }
 
+sub i_pvid { goto &i_vlan }
+
 sub root_ip {
     my $bayrs = shift;
 
@@ -1191,7 +1193,7 @@ sub e_vendor {
 
     my %wf_e_vendor;
     foreach my $iid ( keys %$wf_e_idx ) {
-        $wf_e_vendor{$iid} = 'nortel';
+        $wf_e_vendor{$iid} = 'avaya';
     }
     return \%wf_e_vendor;
 }
@@ -1378,7 +1380,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::BayRS - SNMP Interface to Nortel routers running BayRS.
+SNMP::Info::Layer3::BayRS - SNMP Interface to Avaya/Nortel routers running
+BayRS.
 
 =head1 AUTHOR
 
@@ -1401,7 +1404,7 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for routers running Nortel BayRS.  
+Abstraction subclass for routers running Avaya/Nortel BayRS.  
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -1474,7 +1477,7 @@ and the common model with this map :
 
 =item $bayrs->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $bayrs->os()
 
@@ -1548,6 +1551,10 @@ interfaces.
 
 Returns reference to hash.  Maps port VLAN ID to IIDs.
 
+=item $bayrs->i_pvid()
+
+Returns reference to hash.  Maps port VLAN ID to IIDs.
+
 =back
 
 =head2 Pseudo F<ENTITY-MIB> information
@@ -1583,7 +1590,7 @@ Returns reference to hash.  Key: IID, Value: Hardware version.
 
 =item $bayrs->e_vendor()
 
-Returns reference to hash.  Key: IID, Value: nortel.
+Returns reference to hash.  Key: IID, Value: avaya.
 
 =item $bayrs->e_serial()
 
@@ -1634,11 +1641,11 @@ See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =over
 
-=item $extreme->munge_hw_rev()
+=item $bayrs->munge_hw_rev()
 
 Converts octets to a decimal major.minor string.
 
-=item $extreme->munge_wf_serial()
+=item $bayrs->munge_wf_serial()
 
 Coverts octets to a decimal string.
 

Info/Layer3/BlueCoatSG.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,
@@ -113,7 +113,7 @@ Subclass for Blue Coat SG Series proxy devices
 
 =head2 Required MIBs
 
-BLUECOAT-SG-PROXY-MIB
+ BLUECOAT-SG-PROXY-MIB
 
 =over
 
@@ -141,7 +141,7 @@ Returns C<'sgos'>
 
 =item $router->os_ver()
 
-Tries to resolve version string from "sgProxyVersion"
+Tries to resolve version string from C<"sgProxyVersion">.
 
 =back
 

Info/Layer3/C3550.pm

@@ -32,39 +32,22 @@
 package SNMP::Info::Layer3::C3550;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::Layer3::CiscoSwitch;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::C3550::ISA = qw/
-    SNMP::Info::CiscoVTP
-    SNMP::Info::CiscoStpExtensions
     SNMP::Info::CiscoStack
-    SNMP::Info::LLDP
-    SNMP::Info::CDP
-    SNMP::Info::CiscoStats
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
+    SNMP::Info::Layer3::CiscoSwitch
     Exporter/;
 
 @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -72,46 +55,23 @@ $VERSION = '2.11';
 #       So we want CiscoVTP to come last to get the right one.
 # The @ISA order should match these orders.
 
-%MIBS = (
-    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::LLDP::MIBS,               %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,
-);
-
+%MIBS
+    = ( %SNMP::Info::Layer3::CiscoSwitch::MIBS, %SNMP::Info::CiscoStack::MIBS,
+    );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,               %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,               %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer3::CiscoSwitch::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 sub vendor {
@@ -232,145 +192,6 @@ sub set_i_duplex_admin {
     }
 }
 
-sub cisco_comm_indexing {
-    return 1;
-}
-
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $c3550 = shift;
-    return $c3550->hasLLDP() || $c3550->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $c3550      = shift;
-    my $partial = shift;
-
-    my $cdp  = $c3550->SUPER::c_ip($partial) || {};
-    my $lldp = $c3550->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $c3550      = shift;
-    my $partial = shift;
-
-    my $cdp  = $c3550->SUPER::c_if($partial)  || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    # We need to match the lldp key with the ifIndex
-    # via lldpLocPortId and ifName
-    my $i_name = $c3550->ifName($partial) || {};
-    my $i_name_rev = {};
-    while ( my($key,$val) = each %$i_name ){
-	$i_name_rev->{$val} = $key;
-    }
-    my $loc_port_id = $c3550->lldpLocPortId($partial) || {};
-    my $lldp = $c3550->lldp_if($partial) || {};
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid} || next;
-	my $name = $loc_port_id->{$if} || next;
-	my $i_index = $i_name_rev->{$name} || next;
-        $c_if{$iid} = $i_index;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $c3550   = shift;
-    my $partial = shift;
-
-    my $lldp = $c3550->lldp_port($partial)     || {};
-    my $cdp  = $c3550->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $c3550   = shift;
-    my $partial = shift;
-
-    my $lldp = $c3550->lldp_id($partial)     || {};
-    my $cdp  = $c3550->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $c3550      = shift;
-    my $partial = shift;
-
-    my $lldp = $c3550->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $c3550->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
-
 1;
 __END__
 
@@ -416,25 +237,9 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoSTPExtensions
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoVTP
-
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CDP
-
-=item SNMP::Info::LLDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =back
 
@@ -444,26 +249,10 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
-requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
+requirements.
 
 =back
 
@@ -488,108 +277,21 @@ Will take the translated model number and try to format it better.
 
 Tries to cull the number of ports from the model number.
 
-=item $c3550->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =back
 
-=head2 Topology information
-
-Based upon the firmware version Cisco devices may support Link Layer Discovery 
-Protocol (LLDP) in addition to Cisco Discovery Protocol (CDP).  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
-
-=over
-
-=item $c3550->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=back
-
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStack
+=head2 Globals imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=over 
-
-=item $c3550->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $c3550->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $c3550->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $c3550->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $c3550->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back 
-
 =head2 Overrides
 
 =over
@@ -630,45 +332,13 @@ Crosses $c3550->p_port() with $c3550->p_duplex() to utilize port C<ifIndex>.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
+details.
 
 =cut

Info/Layer3/C4000.pm

@@ -31,48 +31,30 @@
 package SNMP::Info::Layer3::C4000;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
+use SNMP::Info::Layer3::CiscoSwitch;
 use SNMP::Info::MAU;
-use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::C4000::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::C4000::ISA = qw/
+    SNMP::Info::Layer3::CiscoSwitch
+    SNMP::Info::MAU
+    Exporter/;
 @SNMP::Info::Layer3::C4000::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,
+    %SNMP::Info::Layer3::CiscoSwitch::MIBS,
     'CISCO-ENVMON-MIB' => 'ciscoEnvMonMIB',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     'ps1_type'   => 'ciscoEnvMonSupplyStatusDescr.1',
     'ps1_status' => 'ciscoEnvMonSupplyState.1',
     'ps2_type'   => 'ciscoEnvMonSupplyStatusDescr.2',
@@ -80,24 +62,14 @@ $VERSION = '2.11';
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,
     %SNMP::Info::MAU::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
     'fan_state' => 'ciscoEnvMonFanState',
     'fan_descr' => 'ciscoEnvMonFanStatusDescr',
 );
 
-%MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,      %SNMP::Info::MAU::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE, %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,  %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,         %SNMP::Info::CiscoVTP::MUNGE,
-);
+%MUNGE
+    = ( %SNMP::Info::MAU::MUNGE, %SNMP::Info::Layer3::CiscoSwitch::MUNGE, );
 
 # Override Inheritance for these specific methods
 # use MAU-MIB for admin. duplex and admin. speed
@@ -106,6 +78,11 @@ $VERSION = '2.11';
 *SNMP::Info::Layer3::C4000::i_speed_admin
     = \&SNMP::Info::MAU::mau_i_speed_admin;
 
+*SNMP::Info::Layer3::C4000::set_i_duplex_admin
+    = \&SNMP::Info::MAU::mau_set_i_duplex_admin;
+*SNMP::Info::Layer3::C4000::set_i_speed_admin
+    = \&SNMP::Info::MAU::mau_set_i_speed_admin;
+
 sub fan {
     my $c4000     = shift;
     my $fan_state = $c4000->fan_state();
@@ -120,8 +97,6 @@ sub fan {
     return $ret;
 }
 
-sub cisco_comm_indexing { return 1; }
-
 1;
 __END__
 
@@ -163,22 +138,10 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =item SNMP::Info::MAU
 
-=item SNMP::Info::Layer3
-
 =back
 
 =head2 Required MIBs
@@ -187,23 +150,11 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 =head1 GLOBALS
@@ -214,48 +165,20 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $c4000->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =item $c4000->fan()
 
 Returns fan status
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -281,39 +204,27 @@ Returns either (auto,full,half).
 
 Returns administrative speed for interfaces.
 
+=item $c4000->set_i_speed_admin(speed, ifIndex)
+
+Sets port speed, must be supplied with speed and port C<ifIndex>.
+
+Speed choices are '10', '100', '1000', 'auto'.
+
+=item $c4000->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>.
+
+Duplex choices are 'auto', 'half', 'full'.
+
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
 =cut

Info/Layer3/C6500.pm

@@ -31,34 +31,19 @@
 package SNMP::Info::Layer3::C6500;
 
 use strict;
+use warnings;
 use Exporter;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
-use SNMP::Info::CiscoVTP;
+use SNMP::Info::Layer3::CiscoSwitch;
+use SNMP::Info::MAU;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::C6500::ISA = qw/
-    SNMP::Info::CiscoVTP 
-    SNMP::Info::CiscoStpExtensions
     SNMP::Info::CiscoStack
-    SNMP::Info::LLDP
-    SNMP::Info::CDP 
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoStats
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
+    SNMP::Info::Layer3::CiscoSwitch
+    SNMP::Info::MAU
     Exporter
 /;
 
@@ -66,7 +51,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -75,52 +60,50 @@ $VERSION = '2.11';
 # The @ISA order should match these orders.
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,                %SNMP::Info::LLDP::MIBS,
-    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,    
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::Layer3::CiscoSwitch::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,
+    'CISCO-VIRTUAL-SWITCH-MIB' => 'cvsSwitchMode',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,                %SNMP::Info::LLDP::FUNCS,
-    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
-
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,                %SNMP::Info::LLDP::MUNGE,
-    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,    
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::Layer3::CiscoSwitch::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 sub vendor {
     return 'cisco';
 }
 
-sub cisco_comm_indexing { return 1; }
+sub serial {
+    my $c6500 = shift;
+
+    my $serial = $c6500->SUPER::serial();
+    return $serial if defined $serial and $serial;
+
+    # now grab the table only if SUPER cannot find it
+    my $e_serial = $c6500->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
 
 #  Newer versions use the ETHERLIKE-MIB to report operational duplex.
 
@@ -179,6 +162,16 @@ sub i_duplex_admin {
     }
 }
 
+sub is_virtual_switch {
+    my $cvs = shift;
+    my $cvsSwM = $cvs->cvsSwitchMode() || '';
+
+    if ( $cvsSwM eq 'multiNode' ) {
+        return 1;
+    }
+    return 0;
+}
+
 sub set_i_duplex_admin {
 
     # map a textual duplex to an integer one the switch understands
@@ -186,6 +179,20 @@ sub set_i_duplex_admin {
 
     my $c6500 = shift;
     my ( $duplex, $iid ) = @_;
+ 
+    if ( $c6500->is_virtual_switch() ) {
+
+        # VSS -> MAU
+        # Due to VSS bug
+        # 1. Set the ifMauDefaultType
+        # 2. Disable ifMauAutoNegAdminStatus
+        # If the second set is not done, this is not going to be
+        # working... Cisco Bug id CSCty97033.
+        # SXI is not working (up to at least relase SXI9).
+        # SXJ is working at SXJ3 (not before).
+
+        return $c6500->mau_set_i_duplex_admin( $duplex, $iid );
+    }
 
     my $el_duplex = $c6500->el_duplex($iid);
 
@@ -203,137 +210,34 @@ sub set_i_duplex_admin {
         return $c6500->set_p_duplex( $duplexes{$duplex}, $iid );
     }
     else {
-        return $c6500->SUPER::set_i_duplex_admin;
+        return $c6500->SUPER::set_i_duplex_admin( $duplex, $iid );
     }
 }
 
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $c6500 = shift;
-
-    return $c6500->hasLLDP() || $c6500->SUPER::hasCDP();
-}
-
-sub c_ip {
+sub set_i_speed_admin {
     my $c6500   = shift;
-    my $partial = shift;
+    my ( $speed, $iid ) = @_;
 
-    my $cdp  = $c6500->SUPER::c_ip($partial) || {};
-    my $lldp = $c6500->lldp_ip($partial)     || {};
+    if ( $c6500->is_virtual_switch() ) {
 
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
+        # VSS -> MAU
+        # Due to VSS bug
+        # 1. Set the ifMauDefaultType
+        # 2. Disable ifMauAutoNegAdminStatus
+        # If the second set is not done, this is not going to be working...
+        # Cisco Bug id CSCty97033.
+        # SXI is not working (at least up to relase SXI9).
+        # SXJ is working at SXJ3 (not before).
 
-        $c_ip{$iid} = $ip;
+        return $c6500->mau_set_i_speed_admin( $speed, $iid );
     }
+    else {
 
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
+        # normal behavior using the CiscoStack method
+        return $c6500->SUPER::set_i_speed_admin( $speed, $iid );
     }
-    return \%c_ip;
 }
 
-sub c_if {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_if($partial)     || {};
-    my $cdp  = $c6500->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_port($partial)     || {};
-    my $cdp  = $c6500->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_id($partial)     || {};
-    my $cdp  = $c6500->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $c6500   = shift;
-    my $partial = shift;
-
-    my $lldp = $c6500->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $c6500->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
-
 1;
 __END__
 
@@ -379,25 +283,11 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CDP
+=item SNMP::Info::Layer3::CiscoSwitch
 
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoStpExtensions
+=item SNMP::Info::MAU
 
 =back
 
@@ -407,26 +297,12 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -440,51 +316,31 @@ These are methods that return scalar value from SNMP
 
     Returns 'cisco'
 
-=item $c6500->cisco_comm_indexing()
+=item $c6500->cvsSwitchMode()
 
-Returns 1.  Use vlan indexing.
+Returns the Switch status: multiNode or standalone.
+
+=item $c6500->is_virtual_switch()
+
+Return 1 if the switch (C<cvsSwitchMode>) is in multimode (VSS).
+
+=item $c6500->serial()
+
+Returns serial number of unit (falls back to C<entPhysicalSerialNum>).
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStack
+=head2 Globals imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoStats
+=head2 Globals imported from SNMP::Info::MAU
 
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -529,95 +385,29 @@ Crosses $c6500->p_port() with $c6500->p_duplex() to utilize port C<ifIndex>.
     $c6500->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
         or die "Couldn't change port duplex. ",$c6500->error(1);
 
-=back
+=item $c6500->set_i_speed_admin(speed, ifIndex)
 
-=head2 Topology information
+Sets port speed, must be supplied with speed and port C<ifIndex>.
 
-Based upon the firmware version Cisco devices may support Link Layer Discover
-Protocol (LLDP) in addition to the Cisco-proprietary CDP.  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
+Speed choices are '10', '100', '1000'.
 
-=over
-
-=item $c6500->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=item $c6500->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $c6500->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $c6500->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $c6500->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $c6500->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+Crosses $c6500->p_port() with $c6500->p_speed() to utilize port C<ifIndex>.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
 
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
 
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+=head2 Table Methods imported from SNMP::Info::MAU
 
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
 =cut
-

Info/Layer3/Cisco.pm

@@ -31,59 +31,70 @@
 package SNMP::Info::Layer3::Cisco;
 
 use strict;
+use warnings;
 use Exporter;
 use SNMP::Info::CiscoVTP;
+use SNMP::Info::LLDP;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
 use SNMP::Info::CiscoRTT;
 use SNMP::Info::CiscoQOS;
 use SNMP::Info::CiscoConfig;
 use SNMP::Info::CiscoPower;
+use SNMP::Info::CiscoStpExtensions;
 use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
+@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP
+    SNMP::Info::LLDP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoRTT
+    SNMP::Info::CiscoQOS SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower SNMP::Info::CiscoStpExtensions
     SNMP::Info::Layer3
     Exporter/;
 @SNMP::Info::Layer3::Cisco::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
     %SNMP::Info::CiscoPower::MIBS,
     %SNMP::Info::CiscoConfig::MIBS,
     %SNMP::Info::CiscoQOS::MIBS,
     %SNMP::Info::CiscoRTT::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
     %SNMP::Info::CiscoStats::MIBS,
     %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::CiscoVTP::MIBS,
     'CISCO-EIGRP-MIB' => 'cEigrpAsRouterId',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,      %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS, %SNMP::Info::CiscoQOS::GLOBALS,
-    %SNMP::Info::CiscoRTT::GLOBALS,    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,  %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS, 'eigrp_id' => 'cEigrpAsRouterId',
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoQOS::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    'eigrp_id' => 'cEigrpAsRouterId',
 );
 
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
     %SNMP::Info::CiscoPower::FUNCS,
     %SNMP::Info::CiscoConfig::FUNCS,
     %SNMP::Info::CiscoQOS::FUNCS,
     %SNMP::Info::CiscoRTT::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
     %SNMP::Info::CiscoStats::FUNCS,
     %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::CiscoVTP::FUNCS,
 
     # EIGRP
@@ -92,33 +103,37 @@ $VERSION = '2.11';
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE,
     %SNMP::Info::CiscoPower::MUNGE,
     %SNMP::Info::CiscoConfig::MUNGE,
     %SNMP::Info::CiscoQOS::MUNGE,
     %SNMP::Info::CiscoRTT::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,
     %SNMP::Info::CiscoStats::MUNGE,
     %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::CiscoVTP::MUNGE,
     'eigrp_peers' => \&SNMP::Info::munge_ip,
 );
 
 sub i_vlan {
-    my ($cisco)   = shift;
-    my ($partial) = shift;
+    my $cisco   = shift;
+    my $partial = shift;
 
-    my ($i_type)  = $cisco->i_type($partial);
-    my ($i_descr) = $cisco->i_description($partial);
-    my %i_vlan;
+    my $i_type  = $cisco->i_type($partial);
+    my $i_descr = $cisco->i_description($partial);
+    my $i_vlan  = $cisco->SUPER::i_vlan($partial);
 
     foreach my $idx ( keys %$i_descr ) {
-        if ( $i_type->{$idx} eq 'l2vlan' || $i_type->{$idx} eq 135 ) {
+        next unless $i_type->{$idx};
+        if (   $i_type->{$idx} eq 'l2vlan'
+            || $i_type->{$idx} eq '135' && !defined $i_vlan->{$idx} )
+        {
             if ( $i_descr->{$idx} =~ /\.(\d+)$/ ) {
-                $i_vlan{$idx} = $1;
+                $i_vlan->{$idx} = $1;
             }
         }
     }
-    return \%i_vlan;
+    return $i_vlan;
 }
 
 1;
@@ -127,7 +142,9 @@ __END__
 =head1 NAME
 
 SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
-that are not covered in other classes.
+that are not covered in other classes and the base L3 Cisco class for other
+device specific L3 Cisco classes.
+
 
 =head1 AUTHOR
 
@@ -151,7 +168,8 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Subclass for Generic Cisco Routers running IOS
+Subclass for Generic Cisco Routers running IOS and the base L3 Cisco class
+for other device specific L3 Cisco classes.
 
 =head2 Inherited Classes
 
@@ -159,12 +177,12 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::CiscoVTP
 
+=item SNMP::Info::LLDP
+
 =item SNMP::Info::CDP
 
 =item SNMP::Info::CiscoStats
 
-=item SNMP::Info::CiscoImage
-
 =item SNMP::Info::CiscoRTT
 
 =item SNMP::Info::CiscoQOS
@@ -173,6 +191,8 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::Power
 
+=item SNMP::Info::CiscoStpExtensions
+
 =item SNMP::Info::Layer3
 
 =back
@@ -187,12 +207,12 @@ Subclass for Generic Cisco Routers running IOS
 
 See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
@@ -201,6 +221,8 @@ See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
@@ -211,10 +233,6 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $cisco->vendor()
-
-    Returns 'cisco'
-
 =item $cisco->eigrp_id()
 
 (C<cEigrpAsRouterId>)
@@ -225,6 +243,10 @@ These are methods that return scalar value from SNMP
 
 See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::CDP
 
 See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
@@ -233,10 +255,6 @@ See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
@@ -253,6 +271,10 @@ See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
@@ -280,6 +302,10 @@ Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
 See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CDP
 
 See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
@@ -288,10 +314,6 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
@@ -308,6 +330,10 @@ See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/CiscoASA.pm

@@ -0,0 +1,195 @@
+# SNMP::Info::Layer3::CiscoASA
+# $Id$
+#
+# Copyright (c) 2013 Moe Kraus
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoASA;
+
+use strict;
+use warnings;
+use Exporter;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::CiscoASA::ISA = qw/
+    SNMP::Info::CiscoStats
+    SNMP::Info::Layer3
+    Exporter/;
+@SNMP::Info::Layer3::CiscoASA::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStats::MIBS, );
+
+%GLOBALS
+    = ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    'mac_table' => 'ifPhysAddress',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    'mac_table' => \&SNMP::Info::munge_mac,
+);
+
+sub b_mac {
+    my ($asa) = shift;
+    my $macs = $asa->mac_table();
+    my @macs;
+
+    # gather physical addresses
+    foreach my $i ( keys %$macs ) {
+        my $mac = $macs->{$i};
+
+        # don't catch the bad macs with zeroed OUI
+        if ( $mac !~ m/(0{1,2}:){3}/ ) {
+            push( @macs, $mac );
+        }
+        @macs = sort(@macs);
+    }
+
+    # return the least mac
+    return $macs[0];
+}
+
+sub i_description {
+    my $self    = shift;
+    my $partial = shift;
+
+    my $i_descr = $self->orig_i_description($partial) || {};
+
+    foreach my $ifindex ( keys %$i_descr ) {
+        $i_descr->{$ifindex} =~ /'(.*)'/;
+        $i_descr->{$ifindex} = $1
+            if defined $1;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoASA - Cisco Adaptive Security Appliance
+
+=head1 AUTHOR
+
+Moe Kraus
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $cisco = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $asa->class();
+ print "SNMP::Info determined this device to fall under subclass: $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Cisco ASA Devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $asa->b_mac()
+
+Returns base mac.
+Overrides base mac function in L<SNMP::Info::Layer3>.
+
+=item $asa->i_description()
+
+Overrides base interface description function in L<SNMP::Info> to return the
+configured interface name instead of "Adaptive Security Appliance
+'$configured interface name' interface".
+
+=back
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/CiscoFWSM.pm

@@ -31,34 +31,31 @@
 package SNMP::Info::Layer3::CiscoFWSM;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::Layer3::Cisco;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::Layer3::Cisco
-    Exporter/;
+@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::CiscoStats
+	SNMP::Info::Layer3
+	Exporter/;
 @SNMP::Info::Layer3::CiscoFWSM::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
-%MIBS = (
-    %SNMP::Info::Layer3::Cisco::MIBS,
-);
+%MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStats::MIBS, );
 
-%GLOBALS = (
-    %SNMP::Info::Layer3::Cisco::GLOBALS,
-);
+%GLOBALS
+	= ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS, );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::Cisco::FUNCS,
-
-);
-
-%MUNGE = (
-    %SNMP::Info::Layer3::Cisco::MUNGE,
+	%SNMP::Info::Layer3::FUNCS,
+	%SNMP::Info::CiscoStats::FUNCS,
 );
 
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, %SNMP::Info::CiscoStats::MUNGE, );
 
 # For FWSMs, the ipNetToPhysicalPhysAddress table appears to be of the form:
 # $ifindex.$inetaddresstype.$proto.$ip_address -> $mac_address
@@ -69,65 +66,65 @@ $VERSION = '2.11';
 # This doesn't really line up to what at_* return, so we munge it
 
 sub at_paddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
-    my $n_paddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $paddrs   = $fwsm->n2p_paddr($partial);
+	my $n_paddrs = {};
 
-	next if($proto != 4); # at_paddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $n_paddrs->{"$ifindex.$ip"} = $paddr;
-    }
-    return $n_paddrs;
+		next if ( $proto != 4 );    # at_paddr doesn't support non-IPv4
+
+		$n_paddrs->{"$ifindex.$ip"} = $paddr;
+	}
+	return $n_paddrs;
 }
 
 sub at_netaddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
+	my $paddrs = $fwsm->n2p_paddr($partial);
 
-    my $netaddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $netaddrs = {};
 
-	next if($proto != 4); # at_netaddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $netaddrs->{"$ifindex.$ip"} = $ip;
-    }
-    return $netaddrs;
+		next if ( $proto != 4 );    # at_netaddr doesn't support non-IPv4
+
+		$netaddrs->{"$ifindex.$ip"} = $ip;
+	}
+	return $netaddrs;
 }
 
 sub at_ifaddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
+	my $paddrs = $fwsm->n2p_paddr($partial);
 
-    my $ifaddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $ifaddrs = {};
 
-	next if($proto != 4); # at_ifaddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $ifaddrs->{"$ifindex.$ip"} = $ip;
-    }
-    return $ifaddrs;
+		next if ( $proto != 4 );    # at_ifaddr doesn't support non-IPv4
+
+		$ifaddrs->{"$ifindex.$ip"} = $ip;
+	}
+	return $ifaddrs;
 }
 
 1;
@@ -135,8 +132,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules for
-features not covered elsewhere.
+SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules
+for features not covered elsewhere.
 
 =head1 AUTHOR
 
@@ -146,14 +143,14 @@ Brian De Wolf
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $fwsm = new SNMP::Info(
-                        AutoSpecify => 1,
-                        Debug       => 1,
-                        # These arguments are passed directly to SNMP::Session
-                        DestHost    => 'myswitch',
-                        Community   => 'public',
-                        Version     => 2
-                        ) 
-    or die "Can't connect to DestHost.\n";
+						AutoSpecify => 1,
+						Debug       => 1,
+						# These arguments are passed directly to SNMP::Session
+						DestHost    => 'myswitch',
+						Community   => 'public',
+						Version     => 2
+						) 
+	or die "Can't connect to DestHost.\n";
 
  my $class      = $fwsm->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
@@ -166,7 +163,9 @@ Subclass for Cisco Firewall Services Modules
 
 =over
 
-=item SNMP::Info::Layer3::Cisco
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::Layer3
 
 =back
 
@@ -176,15 +175,21 @@ Subclass for Cisco Firewall Services Modules
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
 
 =head1 GLOBALS
 
-=head2 Global Methods imported from SNMP::Info::Layer3::Cisco
+=head2 Globals imported from SNMP::Info::CiscoStats
 
-See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -202,22 +207,26 @@ to a hash.
 =item $fwsm->at_paddr()
 
 This function derives the at_paddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =item $fwsm->at_netaddr()
 
 This function derives the at_netaddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =item $fwsm->at_ifaddr()
 
 This function derives the at_ifaddr information from the n2p_paddr() table as
-the MIB to provide that information isn't supported on FWSMs.
+the MIB to provide that information isn't supported on FWSM.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+=head2 Table Methods imported from SNMP::Info::CiscoStats
 
-See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/CiscoSwitch.pm

@@ -0,0 +1,190 @@
+# SNMP::Info::Layer3::CiscoSwitch
+# $Id$
+#
+# Copyright (c) 2014 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoSwitch;
+
+use strict;
+use warnings;
+use Exporter;
+use SNMP::Info::CiscoAgg;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::Layer3::Cisco;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+@SNMP::Info::Layer3::CiscoSwitch::ISA = qw/
+    SNMP::Info::CiscoAgg
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::Layer3::Cisco
+    Exporter
+/;
+
+@SNMP::Info::Layer3::CiscoSwitch::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::Cisco::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::Cisco::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::Cisco::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::Cisco::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoAgg::MUNGE,
+);
+
+sub cisco_comm_indexing { return 1; }
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoSwitch - Base class for L3 Cisco switches
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $switch = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $switch->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Base subclass for Cisco Layer 2/3 Switches.  
+
+These devices have switch specific characteristics beyond those in
+traditional routers covered by L<SNMP::Info::Layer3::Cisco>. For example,
+port security interface information from L<SNMP::Info::CiscoPortSecurity>.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $swich = new SNMP::Info::Layer3::CiscoSwitch(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoAgg
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::Layer3::Cisco
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $switch->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Contivity.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Entity;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::MIBS, %SNMP::Info::Layer3::MIBS, %SNMP::Info::Entity::MIBS,
@@ -68,7 +68,7 @@ sub layers {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -162,8 +162,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Contivity - SNMP Interface to Nortel VPN Routers
-(Contivity Extranet Switches).
+SNMP::Info::Layer3::Contivity - SNMP Interface to Avaya/Nortel VPN Routers
+(formerly Contivity Extranet Switches).
 
 =head1 AUTHOR
 
@@ -186,7 +186,8 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Nortel VPN Routers (Contivity Extranet Switch).  
+Abstraction subclass for Avaya/Nortel VPN Routers (formerly Contivity
+Extranet Switch).  
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -227,7 +228,7 @@ These are methods that return scalar value from SNMP
 
 =item $contivity->vendor()
 
-Returns 'Nortel'
+Returns 'avaya'
 
 =item $contivity->model()
 

Info/Layer3/Dell.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -193,25 +193,6 @@ sub i_duplex_admin {
     return \%i_duplex_admin;
 }
 
-# Use same methods as netgear.  Some device didn't implement the bridge MIB
-# forwarding table and some don't return MACs for VLANs other than default yet
-# don't support community indexing, so we use the Q-BRIDGE-MIB forwarding
-# table.  Fall back to the orig functions if the qb versions don't
-# return anything.
-sub fw_mac {
-    my $dell = shift;
-    my $ret  = $dell->qb_fw_mac();
-    $ret = $dell->orig_fw_mac() if ( !defined($ret) );
-    return $ret;
-}
-
-sub fw_port {
-    my $dell = shift;
-    my $ret  = $dell->qb_fw_port();
-    $ret = $dell->orig_fw_port() if ( !defined($ret) );
-    return $ret;
-}
-
 sub _vendor {
     my $dell = shift;
 
@@ -232,46 +213,9 @@ sub _vendor {
     }
 }
 
-# lldp support
-sub hasCDP {
-    my $dell = shift;
-    return $dell->hasLLDP();
-}
-
-sub c_ip {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_ip($partial);
-}
-
-sub c_if {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_if($partial);
-}
-
-sub c_port {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_port($partial);
-}
-
-sub c_id {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_id($partial);
-}
-
-sub c_platform {
-    my $dell    = shift;
-    my $partial = shift;
-
-    return $dell->lldp_rem_sysdesc($partial);
-}
+# dot1qTpFdbTable uses dot1qVlanIndex rather than dot1qFdbId as index,
+# so pretend we don't have the mapping
+sub qb_fdb_index {return}
 
 1;
 __END__
@@ -368,10 +312,6 @@ id().  Defaults to 'dlink'.
 Returns 'dell', 'dlink', or 'ibm' based upon the IANA enterprise number in
 id().  Defaults to 'dlink'.
 
-=item $dell->hasCDP()
-
-Returns whether LLDP is enabled.
-
 =back
 
 =head2 Overrides
@@ -389,6 +329,10 @@ otherwise uses the Layer3 serial method.
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -447,42 +391,9 @@ sometimes not unique.
 Returns reference to hash of iid to current link administrative duplex
 setting.
 
-=item $dell->fw_mac()
+=item $dell->qb_fdb_index()
 
-Returns reference to hash of forwarding table MAC Addresses.
-
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
-
-=item $dell->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid)
-
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
-
-=item $dell->c_id()
-
-Returns LLDP information.
-
-=item $dell->c_if()
-
-Returns LLDP information.
-
-=item $dell->c_ip()
-
-Returns LLDP information.
-
-=item $dell->c_platform()
-
-Returns LLDP information.
-
-=item $dell->c_port()
-
-Returns LLDP information.
+Returns nothing to work around incorrect indexing of C<dot1qTpFdbTable>
 
 =back
 
@@ -490,4 +401,8 @@ Returns LLDP information.
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =cut

Info/Layer3/Enterasys.pm

@@ -44,7 +44,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::CDP::MIBS,
@@ -149,154 +149,103 @@ sub i_duplex_admin {
     return $enterasys->mau_i_duplex_admin($partial);
 }
 
-# Normal BRIDGE-MIB has issues on some devices, duplicates and
-# non-increasing oids, Use Q-BRIDGE-MIB for macsuck
-sub fw_mac {
-    my $enterasys = shift;
-    my $partial   = shift;
-
-    return $enterasys->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $enterasys = shift;
-    my $partial   = shift;
-
-    return $enterasys->qb_fw_port($partial);
-}
-
-#  Use CDP and/or LLDP
-#
-#  LLDP table timefilter implementation continuously increments when walked
+#  TimeFilter implementation continuously increments when walked
 #  and we may never reach the end of the table.  This behavior can be
 #  modified with the "set snmp timefilter break disable" command,
 #  unfortunately it is not the default.  Query with a partial value of zero
-#  which means no time filter.
+#  which means no time filter for tables with and index containing a
+#  TimeFilter
 
-sub hasCDP {
-    my $enterasys = shift;
+sub qb_fdb_index {
+    my $bridge  = shift;
 
-    return $enterasys->hasLLDP() || $enterasys->SUPER::hasCDP();
+    my $qb_fdb_ids = $bridge->dot1qVlanFdbId(0) || {};
+
+    # Strip the TimeFilter
+    my $vl_fdb_index = {};
+    for my $orig (keys(%$qb_fdb_ids)) {
+        (my $new = $orig) =~ s/^\d+\.//;
+        $vl_fdb_index->{$new} = $qb_fdb_ids->{$orig};
+    }
+
+    return $vl_fdb_index;
 }
 
-sub c_ip {
-    my $enterasys = shift;
-    my $partial   = shift;
+sub i_vlan_membership {
+    my $bridge  = shift;
+    my $partial = shift;
 
-    my $cdp  = $enterasys->SUPER::c_ip($partial) || {};
-    my $lldp = $enterasys->lldp_ip(0)            || {};
+    # dot1qVlanCurrentTable TimeFilter index
+    my $v_ports = $bridge->qb_cv_egress(0) || $bridge->qb_v_egress();
 
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
+    return $bridge->_vlan_hoa($v_ports, $partial);
 }
 
-sub c_if {
-    my $enterasys = shift;
-    my $partial   = shift;
+sub i_vlan_membership_untagged {
+    my $bridge  = shift;
+    my $partial = shift;
 
-    my $lldp = $enterasys->lldp_if(0)            || {};
-    my $cdp  = $enterasys->SUPER::c_if($partial) || {};
+    # dot1qVlanCurrentTable TimeFilter index
+    my $v_ports = $bridge->qb_cv_untagged(0) || $bridge->qb_v_untagged();
 
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
+    return $bridge->_vlan_hoa($v_ports, $partial);
 }
 
-sub c_port {
+sub lldp_ip {
     my $enterasys = shift;
-    my $partial   = shift;
+    my $partial   = shift || 0;
 
-    my $lldp = $enterasys->lldp_port(0)            || {};
-    my $cdp  = $enterasys->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
+    return $enterasys->SUPER::lldp_ip($partial);
 }
 
-sub c_id {
-    my $enterasys = shift;
-    my $partial   = shift;
+# [3564920] LLDP-MIB::lldpLocPortDesc isn't always unique,
+# use LLDP-MIB::lldpLocPortId this cross references to ifName
+sub lldp_if {
+    my $lldp    = shift;
+    my $partial = shift || 0;
 
-    my $lldp = $enterasys->lldp_id(0)            || {};
-    my $cdp  = $enterasys->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
+    my $addr    = $lldp->lldp_rem_pid($partial) || {};
+    my $i_descr = $lldp->ifName() || {};
+    my %r_i_descr = reverse %$i_descr;
+    
+    my %lldp_if;
+    foreach my $key ( keys %$addr ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        next unless $port;
+        # Local LLDP port may not equate to ifIndex
+        # Cross reference lldpLocPortId with ifName to get ifIndex
+        my $lldp_desc = $lldp->lldpLocPortId($port);
+        my $desc = $lldp_desc->{$port};
+        # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
+        if ( exists $r_i_descr{$desc} ) {
+            $port = $r_i_descr{$desc};
+        }
+        
+        $lldp_if{$key} = $port;
     }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
+    return \%lldp_if;
 }
 
-sub c_platform {
+sub lldp_port {
     my $enterasys = shift;
-    my $partial   = shift;
+    my $partial   = shift || 0;
 
-    my $lldp = $enterasys->lldp_rem_sysdesc(0)         || {};
-    my $cdp  = $enterasys->SUPER::c_platform($partial) || {};
+    return $enterasys->SUPER::lldp_port($partial);
+}
 
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
+sub lldp_id {
+    my $enterasys = shift;
+    my $partial   = shift || 0;
 
-        $c_platform{$iid} = $platform;
-    }
+    return  $enterasys->SUPER::lldp_id($partial);
+}
 
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
+sub lldp_platform {
+    my $enterasys = shift;
+    my $partial   = shift || 0;
 
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
+    return  $enterasys->SUPER::lldp_rem_sysdesc($partial);
 }
 
 1;
@@ -399,12 +348,6 @@ Returns base mac
 
 =back
 
-=head2 Overrides
-
-=over
-
-=back
-
 =head2 Globals imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
@@ -450,65 +393,33 @@ See documentation for mau_i_duplex() in L<SNMP::Info::MAU/"TABLE METHODS">.
 See documentation for mau_i_duplex_admin() in
 L<SNMP::Info::MAU/"TABLE METHODS">.
 
-=item $enterasys->fw_mac()
-
-Returns reference to hash of forwarding table MAC Addresses.
-
-=item $enterasys->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid).
-
-(C<dot1qTpFdbPort>)
-
 =back
 
-=head2 Topology information
+=head2 Time Filter Table Index Overrides
 
-Based upon the firmware version Enterasys devices may support Cabletron
-Discovery Protocol (CTRON CDP), Cisco Discovery Protocol (CDP), Link Layer
-Discovery Protocol (LLDP), or all.  This module currently supports CDP and
-LLDP, but not CTRON CDP.  These methods will query both CDP and LLDP and
-return the combination of all information.  As a result, there may be
-identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
+The time filter C<TimeFilter> implementation continuously increments when
+walked and we may never reach the end of the table.  This behavior can be
+modified with the C<"set snmp timefilter break disable"> command,
+unfortunately it is not the default.  These methods are overridden to
+supply a partial value of zero which means no time filter.
 
 =over
 
-=item $enterasys->hasCDP()
+=item $enterasys->qb_fdb_index()
 
-Returns true if the device is running either CDP or LLDP.
+=item $enterasys->i_vlan_membership()
 
-=item $enterasys->c_if()
+=item $enterasys->i_vlan_membership_untagged()
 
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
+=item $enterasys->lldp_if()
 
-=item $enterasys->c_ip()
+=item $enterasys->lldp_ip()
 
-Returns reference to hash.  Key: iid Value: remote IPv4 address
+=item $enterasys->lldp_port()
 
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
+=item $enterasys->lldp_id()
 
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $enterasys->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $enterasys->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $enterasys->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
+=item $enterasys->lldp_platform()
 
 =back
 

Info/Layer3/Extreme.pm

@@ -1,7 +1,7 @@
 # SNMP::Info::Layer3::Extreme - SNMP Interface to Extreme devices
 # $Id$
 #
-# Copyright (c) 2008 Eric Miller
+# Copyright (c) 2012 Eric Miller
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
@@ -46,7 +46,7 @@ use SNMP::Info::EDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -80,19 +80,22 @@ $VERSION = '2.11';
     %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::EDP::FUNCS,
     'fan_state' => 'extremeFanOperational',
-
     # EXTREME-FDB-MIB:extremeFdbMacFdbTable
     'ex_fw_mac'    => 'extremeFdbMacFdbMacAddress',
     'ex_fw_port'   => 'extremeFdbMacFdbPortIfIndex',
     'ex_fw_status' => 'extremeFdbMacFdbStatus',
-
     # EXTREME-VLAN-MIB:extremeVlanIfTable
     'ex_vlan_descr'     => 'extremeVlanIfDescr',
     'ex_vlan_global_id' => 'extremeVlanIfGlobalIdentifier',
-
+    'ex_vlan_id'        => 'extremeVlanIfVlanId',
     # EXTREME-VLAN-MIB:extremeVlanEncapsIfTable
     'ex_vlan_encap_tag' => 'extremeVlanEncapsIfTag',
-
+    # EXTREME-VLAN-MIB:extremeVlanOpaqueTable
+    'ex_vlan_untagged'  => 'extremeVlanOpaqueUntaggedPorts',
+    'ex_vlan_tagged'    => 'extremeVlanOpaqueTaggedPorts',
+    # EXTREME-POE-MIB::extremePethPseSlotTable
+    'peth_power_watts'  => 'extremePethSlotPowerLimit',
+    # EXTREME-POE-MIB::extremePethPsePortTable
     'peth_port_power'   => 'extremePethPortMeasuredPower',
 );
 
@@ -103,12 +106,14 @@ $VERSION = '2.11';
     %SNMP::Info::MAU::MUNGE,
     %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::EDP::MUNGE,
-    'ex_fw_mac'      => \&SNMP::Info::munge_mac,
-    'ps1_status_old' => \&munge_true_ok,
-    'ps1_status_new' => \&munge_power_stat,
-    'ps2_status_old' => \&munge_power_stat,
-    'ps2_status_new' => \&munge_power_stat,
-    'fan_state'      => \&munge_true_ok,
+    'ex_fw_mac'        => \&SNMP::Info::munge_mac,
+    'ps1_status_old'   => \&munge_true_ok,
+    'ps1_status_new'   => \&munge_power_stat,
+    'ps2_status_old'   => \&munge_power_stat,
+    'ps2_status_new'   => \&munge_power_stat,
+    'fan_state'        => \&munge_true_ok,
+    'ex_vlan_untagged' => \&SNMP::Info::munge_port_list,
+    'ex_vlan_tagged'   => \&SNMP::Info::munge_port_list,
 );
 
 # Method OverRides
@@ -144,19 +149,20 @@ sub os {
 
     my $desc = $extreme->description();
 
-    if ($desc =~ /xos/i) {
+    if ( $desc =~ /xos/i ) {
         return 'xos';
     }
-    
+
     return 'extremeware';
 }
 
+
 sub os_ver {
     my $extreme = shift;
     my $descr   = $extreme->description();
     return unless defined $descr;
 
-    if ( $descr =~ m/Version\s+([^ ]+)/ ) {
+    if ( $descr =~ m/Version\s+([^ ]+)/i ) {
         return $1;
     }
 
@@ -197,7 +203,7 @@ sub i_ignore {
     my %i_ignore;
     foreach my $if ( keys %$i_description ) {
         if ( $i_description->{$if}
-            =~ /^(802.1Q Encapsulation Tag \d+|VLAN \d+|lo\d+)/i )
+            =~ /^(802.1Q Encapsulation Tag \d+|VLAN \d+|lo\d+|VirtualRouter\d+)/i )
         {
             $i_ignore{$if}++;
         }
@@ -210,6 +216,10 @@ sub i_ignore {
 # ifIndex.
 sub bp_index {
     my $extreme  = shift;
+
+    my $bindex = $extreme->SUPER::bp_index();
+    return $bindex if (keys %$bindex);
+
     my $if_index = $extreme->i_index();
 
     my %bp_index;
@@ -260,28 +270,45 @@ sub fan {
     return $ret;
 }
 
-# Newer versions of the Extreme firmware have vendor-specific tables
-# for this; those are ex_fw_*().  Older firmware versions don't have
-# these tables, so we use the BRIDGE-MIB tables.
+# For xos based VLAN functions we need to know how the ports are indexed
+# default is slot * 1000, but some older switches start at 1
+sub _slot_factor {
+    my $extreme = shift;
+    
+    my $index = $extreme->i_index();
+    
+    return 1 if (exists $index->{1} && $index->{1} == 1);
+    return 1000;
+}
+
+# Some versions of the Extreme firmware have vendor-specific tables
+# for this; those are ex_fw_*().  Some don't have these tables,
+# we use the BRIDGE-MIB tables if available then the ex_fw_*() methods.
 sub fw_mac {
     my $extreme = shift;
-    my $fw_mac  = $extreme->ex_fw_mac;
-    return $fw_mac if defined($fw_mac);
-    return $extreme->orig_fw_mac();
+    
+    my $b = $extreme->SUPER::fw_mac();
+    return $b if (keys %$b);
+
+    return $extreme->ex_fw_mac();
 }
 
 sub fw_port {
     my $extreme = shift;
-    my $fw_port = $extreme->ex_fw_port;
-    return $fw_port if defined($fw_port);
-    return $extreme->orig_fw_port();
+    
+    my $b = $extreme->SUPER::fw_port();
+    return $b if (keys %$b);
+    
+    return $extreme->ex_fw_port();
 }
 
 sub fw_status {
     my $extreme   = shift;
-    my $fw_status = $extreme->ex_fw_status;
-    return $fw_status if defined($fw_status);
-    return $extreme->orig_fw_status();
+
+    my $b = $extreme->SUPER::fw_status();
+    return $b if (keys %$b);
+
+    return $extreme->ex_fw_status();
 }
 
 # Mapping the virtual VLAN interfaces:
@@ -322,7 +349,7 @@ sub _if2tag {
         }
     }
     if ($missed) {
-        my $global_id = $extreme->ex_vlan_global_id();
+        my $global_id = $extreme->ex_vlan_id();
         foreach my $if ( keys %if2tag ) {
             $if2tag{$if} = -$global_id->{$if}
                 if ( $if2tag{$if} == -1 && defined( $global_id->{$if} ) );
@@ -331,7 +358,7 @@ sub _if2tag {
     return \%if2tag;
 }
 
-# No partial support in v_name or v_index, because the obivous partial
+# No partial support in v_name or v_index, because the obvious partial
 # is the VLAN ID and the index here is the ifIndex of
 # the VLAN interface.
 sub v_name {
@@ -341,12 +368,66 @@ sub v_name {
 
 sub v_index {
     my $extreme = shift;
-    return $extreme->_if2tag();
+    return $extreme->ex_vlan_id || $extreme->_if2tag();
 }
 
 sub i_vlan {
     my $extreme    = shift;
     my $partial    = shift;
+
+    # Some devices support Q-Bridge, if so short circuit and return it
+    my $q_bridge = $extreme->SUPER::i_vlan($partial);
+    return $q_bridge if (keys %$q_bridge);
+
+    # Next we try extremeVlanOpaqueTable
+    my $xos = $extreme->_xos_i_vlan($partial);
+    return $xos if (keys %$xos);
+    
+    # Try older ifStack method
+    my $extremeware = $extreme->_extremeware_i_vlan($partial);
+    return $extremeware if (keys %$extremeware);
+    
+    return;
+}
+
+sub _xos_i_vlan {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $index   = $extreme->i_index();
+    my $vlans   = $extreme->ex_vlan_id() || {};
+    my $slotx   = $extreme->_slot_factor() || 1000;
+    my $u_ports = $extreme->ex_vlan_untagged() || {};
+
+    my $i_vlan = {};
+    foreach my $idx ( keys %$u_ports ) {
+        next unless ( defined $u_ports->{$idx} );
+        my $portlist = $u_ports->{$idx};
+        my $ret      = [];
+
+        my ( $vlan_if, $slot ) = $idx =~ /^(\d+)\.(\d+)/;
+        my $vlan = $vlans->{$vlan_if} || '';
+
+        # Convert portlist bit array to bp_index array
+        for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+            push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
+                if ( @$portlist[$i] );
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            $i_vlan->{$ifindex} = $vlan;
+        }
+    }
+    return $i_vlan;
+}
+
+sub _extremeware_i_vlan {
+    my $extreme    = shift;
+    my $partial    = shift;
     my $stack      = $extreme->ifStackStatus($partial);
     my $encap_tag  = $extreme->ex_vlan_encap_tag();
     my $vlan_descr = $extreme->ex_vlan_descr();
@@ -370,6 +451,65 @@ sub i_vlan {
 }
 
 sub i_vlan_membership {
+    my $extreme = shift;
+    my $partial = shift;
+
+    # Some devices support Q-Bridge, if so short circuit and return it
+    my $q_bridge = $extreme->SUPER::i_vlan_membership($partial);
+    return $q_bridge if (ref {} eq ref $q_bridge and scalar keys %$q_bridge);
+
+    # Next we try extremeVlanOpaqueTable
+    my $xos = $extreme->_xos_i_vlan_membership($partial);
+    return $xos if (ref {} eq ref $xos and scalar keys %$xos);
+    
+    # Try older ifStack method
+    my $extremeware = $extreme->_extremeware_i_vlan_membership($partial);
+    return $extremeware if (ref {} eq ref $extremeware and scalar keys %$extremeware);
+    
+    return;
+}
+
+sub _xos_i_vlan_membership {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $index   = $extreme->i_index();
+    my $vlans   = $extreme->ex_vlan_id();
+    my $slotx   = $extreme->_slot_factor() || 1000;
+    my $u_ports = $extreme->ex_vlan_untagged() || {};
+    my $t_ports = $extreme->ex_vlan_tagged() || {};
+
+    my $i_vlan_membership = {};
+    foreach my $idx ( keys %$u_ports ) {
+        next unless ( defined $u_ports->{$idx} );
+        my $u_portlist = $u_ports->{$idx};
+        my $t_portlist = $t_ports->{$idx};
+        my $ret        = [];
+
+        my ( $vlan_if, $slot ) = $idx =~ /^(\d+)\.(\d+)/;
+        my $vlan = $vlans->{$vlan_if} || '';
+
+        foreach my $portlist ( $u_portlist, $t_portlist ) {
+
+            # Convert portlist bit array to bp_index array
+            for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+                push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
+                    if ( @$portlist[$i] );
+            }
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
+        }
+    }
+    return $i_vlan_membership;
+}
+
+sub _extremeware_i_vlan_membership {
     my $extreme    = shift;
     my $partial    = shift;
     my $stack      = $extreme->ifStackStatus($partial);
@@ -402,6 +542,78 @@ sub i_vlan_membership {
     return \%i_vlan_membership;
 }
 
+sub i_vlan_membership_untagged {
+    my $extreme = shift;
+    my $partial = shift;
+
+    # Some devices support Q-Bridge, if so short circuit and return it
+    my $q_bridge = $extreme->SUPER::i_vlan_membership_untagged($partial);
+    return $q_bridge if (ref {} eq ref $q_bridge and scalar keys %$q_bridge);
+
+    # Next we try extremeVlanOpaqueTable
+    my $xos = $extreme->_xos_i_vlan_membership_untagged($partial);
+    return $xos if (ref {} eq ref $xos and scalar keys %$xos);
+    
+    # Try older ifStack method
+    my $extremeware = $extreme->_extremeware_i_vlan_membership_untagged($partial);
+    return $extremeware if (ref {} eq ref $extremeware and scalar keys %$extremeware);
+    
+    return;
+}
+
+sub _xos_i_vlan_membership_untagged {
+    my $extreme = shift;
+    my $partial = shift;
+
+    my $index   = $extreme->i_index();
+    my $vlans   = $extreme->ex_vlan_id();
+    my $slotx   = $extreme->_slot_factor() || 1000;
+    my $u_ports = $extreme->ex_vlan_untagged() || {};
+
+    my $i_vlan_membership = {};
+    foreach my $idx ( keys %$u_ports ) {
+        next unless ( defined $u_ports->{$idx} );
+        my $u_portlist = $u_ports->{$idx};
+        my $ret        = [];
+
+        my ( $vlan_if, $slot ) = $idx =~ /^(\d+)\.(\d+)/;
+        my $vlan = $vlans->{$vlan_if} || '';
+
+        foreach my $portlist ( $u_portlist ) {
+
+            # Convert portlist bit array to bp_index array
+            for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+                push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
+                    if ( @$portlist[$i] );
+            }
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
+        }
+    }
+    return $i_vlan_membership;
+}
+
+# Assuming Cisco-like trunk behavior that native VLAN is transmitted untagged
+sub _extremeware_i_vlan_membership_untagged {
+    my $extreme  = shift;
+    my $partial = shift;
+
+    my $vlans = $extreme->_extremeware_i_vlan($partial);
+    my $i_vlan_membership = {};
+    foreach my $port (keys %$vlans) {
+        my $vlan = $vlans->{$port};
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+
+    return $i_vlan_membership;
+}
+
 # VLAN management.
 # See extreme-vlan.mib for a detailed description of
 # Extreme's use of ifStackTable and EXTREME-VLAN-MIB.
@@ -549,123 +761,26 @@ sub set_add_i_vlan_tagged {
     return $rv;
 }
 
-#  Use EDP and/or LLDP
-sub hasCDP {
-    my $extreme = shift;
-
-    return $extreme->hasLLDP() || $extreme->hasEDP();
-}
-
-sub c_ip {
+# LLDP uses the bridge index rather than ifIndex
+sub lldp_if {
     my $extreme = shift;
     my $partial = shift;
 
-    my $edp  = $extreme->edp_ip() || {};
-    my $lldp = $extreme->lldp_ip($partial) || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$edp ) {
-        my $ip = $edp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $extreme = shift;
-    my $partial = shift;
-
-    my $lldp = $extreme->lldp_if($partial) || {};
-    my $edp  = $extreme->edp_if() || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$edp ) {
-        my $if = $edp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $extreme      = shift;
-    my $partial = shift;
-
-    my $lldp = $extreme->lldp_port($partial) || {};
-    my $edp  = $extreme->edp_port() || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$edp ) {
-        my $port = $edp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $extreme      = shift;
-    my $partial = shift;
-
-    my $lldp = $extreme->lldp_id($partial) || {};
-    my $edp  = $extreme->edp_id() || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$edp ) {
-        my $id = $edp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
+    my $addr    = $extreme->lldp_rem_pid($partial) || {};
+    my $b_index = $extreme->bp_index() || {};
+    #my %r_i_descr = reverse %$i_descr;
     
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
+    my %lldp_if;
+    foreach my $key ( keys %$addr ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        next unless $port;
+
+        my $idx = $b_index->{$port};
+
+        $lldp_if{$key} = $idx;
     }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $extreme      = shift;
-    my $partial = shift;
-
-    my $lldp = $extreme->lldp_rem_sysdesc($partial)  || {};
-
-    my %c_platform;
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
+    return \%lldp_if;
 }
 
 1;
@@ -860,6 +975,11 @@ Ignores VLAN meta interfaces and loopback
 
 (C<extremeFdbMacFdbStatus>)
 
+=item $extreme->lldp_if()
+
+Returns the mapping to the SNMP Interface Table. Extreme LLDP uses the
+bridge index rather than ifIndex.
+
 =item $extreme->i_vlan()
 
 Returns a mapping between C<ifIndex> and the VLAN.
@@ -879,6 +999,12 @@ IDs.  These are the VLANs which are members of the egress list for the port.
     print "Port: $port VLAN: $vlan\n";
   }
 
+=item $extreme->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
 =item $extreme->v_index()
 
 Returns VLAN IDs
@@ -900,59 +1026,14 @@ F<EXTREME-FDB-MIB> rather than F<BRIDGE-MIB>.
 =item $extreme->peth_port_power()
 
 Power supplied by PoE ports, in milliwatts
-("extremePethPortMeasuredPower")
 
-=back
+(C<extremePethPortMeasuredPower>)
 
-=head2 Topology information
+=item $extreme->peth_power_watts()
 
-Based upon the firmware version Extreme devices may support Extreme Discovery
-Protocol (EDP), Link Layer Discovery Protocol (LLDP), or both.  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
+The configured maximum amount of in-line power available to the slot.
 
-=over
-
-=item $extreme->hasCDP()
-
-Returns true if the device is running either EDP or LLDP.
-
-=item $extreme->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $extreme->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-With EDP multiple entries may exist with the same local port, c_if(), and
-different IPv4 addresses, c_ip(), as EDP reports addresses for each VLAN
-transported across the trunk.  In the case of LLDP with multiple addresses
-there is either a non-LLDP device in between two or more devices or multiple
-devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $extreme->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $extreme->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $extreme->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-This information is only available from LLDP.  EDP does not provide an 
-equivalent.
+(C<extremePethSlotPowerLimit>)
 
 =back
 

Info/Layer3/F5.pm

@@ -0,0 +1,453 @@
+# SNMP::Info::Layer3::F5
+#
+# Copyright (c) 2012 Eric Miller
+# All Rights Reserved
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::F5;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::F5::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::F5::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'F5-BIGIP-SYSTEM-MIB' => 'sysAttrArpMaxEntries',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'os_ver'     => 'sysProductVersion',
+    'mkt_name'   => 'sysPlatformInfoMarketingName',
+    'ps1_status' => 'sysChassisPowerSupplyStatus.1',
+    'ps2_status' => 'sysChassisPowerSupplyStatus.2',
+
+    # Named serial1 to override serial1 in L3 serial method
+    'serial1'  => 'sysGeneralChassisSerialNum',
+    'qb_vlans' => 'sysVlanNumber',
+    'ports'    => 'sysInterfaceNumber',
+
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+
+    # sysInterfaceTable
+    'i_index'       => 'sysInterfaceName',
+    'i_description' => 'sysInterfaceName',
+    'i_mtu'         => 'sysInterfaceMtu',
+    'i_speed'       => 'sysInterfaceMediaActiveSpeed',
+    'i_mac'         => 'sysInterfaceMacAddr',
+    'i_up_admin'    => 'sysInterfaceEnabled',
+    'i_up'          => 'sysInterfaceStatus',
+
+    # sysIfxStatTable
+    'i_octet_in'       => 'sysIfxStatHcInOctets',
+    'i_octet_out'      => 'sysIfxStatHcOutOctets',
+    'i_pkts_ucast_in'  => 'sysIfxStatHcInUcastPkts',
+    'i_pkts_ucast_out' => 'sysIfxStatHcOutUcastPkts',
+
+    # sysInterfaceStatTable
+    'i_discards_in'  => 'sysInterfaceStatDropsIn',
+    'i_discards_out' => 'sysInterfaceStatDropsOut',
+    'i_errors_in'    => 'sysInterfaceStatErrorsIn',
+    'i_errors_out'   => 'sysInterfaceStatErrorsOut',
+
+    # sysInterfaceTable
+    'sys_i_duplex' => 'sysInterfaceMediaActiveDuplex',
+
+    # sysChassisFanTable
+    'fan_state' => 'sysChassisFanStatus',
+
+    # sysVlanTable
+    'sys_v_id' => 'sysVlanId',
+    'v_name'   => 'sysVlanVname',
+
+    # sysVlanMemberTable
+    'sys_vm_tagged' => 'sysVlanMemberTagged',
+    'sys_vm_name'   => 'sysVlanMemberVmname',
+    'sys_vmp_name'  => 'sysVlanMemberParentVname',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'f5';
+}
+
+sub os {
+    return 'f5';
+}
+
+sub fan {
+    my $f5        = shift;
+    my $fan_state = $f5->fan_state();
+    my $ret       = "";
+    my $s         = "";
+    foreach my $i ( sort { $a <=> $b } keys %$fan_state ) {
+        $ret .= $s . $i . ": " . $fan_state->{$i};
+        $s = ", ";
+    }
+    return if ( $s eq "" );
+    return $ret;
+}
+
+sub model {
+    my $f5 = shift;
+
+    my $name = $f5->mkt_name();
+
+    if ( defined $name ) { return $name; }
+
+    my $id    = $f5->id();
+    my $model = &SNMP::translateObj($id);
+    if ( !defined $model ) { return $id; }
+
+    return $model;
+}
+
+# Override L3 interfaces
+sub interfaces {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->i_index($partial);
+}
+
+# Override L3 i_name
+sub i_name {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->i_index($partial);
+}
+
+# We don't have this, so fake it
+sub i_type {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $idx = $f5->i_index($partial);
+
+    my %i_type;
+    foreach my $if ( keys %$idx ) {
+
+        $i_type{$if} = 'ethernetCsmacd';
+    }
+    return \%i_type;
+}
+
+# Override L3 i_duplex
+sub i_duplex {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $duplexes = $f5->sys_i_duplex() || {};
+
+    my %i_duplex;
+    foreach my $if ( keys %$duplexes ) {
+        my $duplex = $duplexes->{$if};
+        next unless defined $duplex;
+        next if ( $duplex eq 'none' );
+
+        $i_duplex{$if} = $duplex;
+    }
+    return \%i_duplex;
+}
+
+# Override Bridge v_index
+sub v_index {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->sys_v_id($partial);
+}
+
+sub i_vlan {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan = {};
+    foreach my $iid ( keys %$tagged ) {
+        my $tag = $tagged->{$iid};
+        next if ( $tag eq 'true' );
+
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        $i_vlan->{$idx} = $vlan;
+    }
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan_membership = {};
+    foreach my $iid ( keys %$tagged ) {
+
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        push( @{ $i_vlan_membership->{$idx} }, $vlan );
+    }
+    return $i_vlan_membership;
+}
+
+sub i_vlan_membership_untagged {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan_membership = {};
+    foreach my $iid ( keys %$tagged ) {
+        
+        next unless $tagged->{$iid} eq 'false';
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        push( @{ $i_vlan_membership->{$idx} }, $vlan );
+    }
+    return $i_vlan_membership;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::F5 - SNMP Interface to F5 network devices.
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $f5 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $f5->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for F5 network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $f5 = new SNMP::Info::Layer3::F5(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<F5-BIGIP-COMMON-MIB>
+
+=item F<F5-BIGIP-SYSTEM-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $f5->model()
+
+Return (C<sysPlatformInfoMarketingName>), otherwise tries to reference
+$f5->id() to F<F5-BIGIP-COMMON-MIB>. 
+
+=item $f5->vendor()
+
+Returns 'f5'
+
+=item $f5->os()
+
+Returns 'f5'
+
+=item $f5->os_ver()
+
+Returns the software version reported by C<sysProductVersion>
+
+=item $f5->fan()
+
+Combines (C<sysChassisFanStatus>) into a single string.
+
+=item $f5->ps1_status()
+
+Returns status of primary power supply
+
+=item $f5->ps2_status()
+
+Returns status of redundant power supply
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $f5->interfaces()
+
+Returns reference to the map between IID and physical port.
+
+(C<sysInterfaceName>).
+
+=item $f5->i_duplex()
+
+Returns reference to hash.  Maps port operational duplexes to IIDs.
+
+=item $f5->i_vlan()
+
+Returns a mapping between C<ifIndex> and the default VLAN.
+
+=item $f5->i_vlan_membership()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.
+
+  Example:
+  my $interfaces = $f5->interfaces();
+  my $vlans      = $f5->i_vlan_membership();
+  
+  foreach my $iid (sort keys %$interfaces) {
+    my $port = $interfaces->{$iid};
+    my $vlan = join(',', sort(@{$vlans->{$iid}}));
+    print "Port: $port VLAN: $vlan\n";
+  }
+
+=item $f5->i_vlan_membership_untagged()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the untagged egress list for
+the port.
+
+=item $f5->v_index()
+
+Returns VLAN IDs
+
+=item $f5->v_name()
+
+Human-entered name for vlans.
+
+=item $f5->i_name()
+
+Returns the human set port name if exists.
+
+=item $f5->i_type()
+
+Returns C<'ethernetCsmacd'> for each C<ifIndex>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Force10.pm

@@ -43,7 +43,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -104,22 +104,6 @@ sub model {
     return $model;
 }
 
-# Use Q-BRIDGE-MIB
-
-sub fw_mac {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->qb_fw_port($partial);
-}
-
 sub v_name {
     my $force10 = shift;
     my $partial = shift;
@@ -137,29 +121,25 @@ sub i_vlan {
     return $i_vlan;
 }
 
-sub i_vlan_membership {
+# Apparently index doesn't use VLAN ID, so override the HOA private
+# method here to correct the mapping 
+sub _vlan_hoa {
     my $force10 = shift;
-    my $partial = shift;
+    my ( $v_ports, $partial ) = @_;
 
-    my $index = $force10->bp_index();
+    my $index   = $force10->bp_index();
     my $v_index = $force10->v_index();
 
-    my $v_ports  = $force10->qb_v_egress();
-
-    # If given a partial it will be an ifIndex, we need to use dot1dBasePort
-    if ($partial) {
-        my %r_index = reverse %$index;
-        $partial    = $r_index{$partial};
-    }
-
-    my $i_vlan_membership = {};
-
+    my $vlan_hoa = {};
     foreach my $idx ( sort keys %{$v_ports} ) {
         next unless ( defined $v_ports->{$idx} );
         my $portlist = $v_ports->{$idx}; # is an array reference
         my $ret      = [];
         my $vlan_ndx = $idx;
 
+        # Strip TimeFilter if we're using VlanCurrentTable
+        ( $vlan_ndx = $idx ) =~ s/^\d+\.//;
+
         # Convert portlist bit array to bp_index array
         for ( my $i = 0; $i <= $#$portlist; $i++ ) {
             push( @{$ret}, $i + 1 ) if ( @$portlist[$i] );
@@ -176,54 +156,10 @@ sub i_vlan_membership {
             # the mapping from Q-BRIDGE-MIB::dot1qVlanFdbId 
             my $mod = $vlan_tag % 4096;
 
-            push ( @{ $i_vlan_membership->{$ifindex} }, ($mod) );
+            push ( @{ $vlan_hoa->{$ifindex} }, ($mod) );
         }
     }
-
-    return $i_vlan_membership;
-}
-
-# Use LLDP
-
-sub hasCDP {
-    my $force10 = shift;
-
-    return $force10->hasLLDP();
-}
-
-sub c_ip {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->lldp_ip($partial);
-}
-
-sub c_if {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->lldp_if($partial);
-}
-
-sub c_port {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->lldp_port($partial);
-}
-
-sub c_id {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->lldp_id($partial);
-}
-
-sub c_platform {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->lldp_rem_sysdesc($partial);
+    return $vlan_hoa;
 }
 
 1;
@@ -294,11 +230,7 @@ These are methods that return scalar values from SNMP:
 
 =item $force10->vendor()
 
-    Returns 'force10'
-
-=item $force10->hasCDP()
-
-    Returns whether LLDP is enabled.
+Returns C<'force10'>
 
 =item $force10->model()
 
@@ -306,7 +238,7 @@ Tries to reference $force10->id() to the Force10 product MIB listed above.
 
 =item $force10->os()
 
-Returns 'ftos'
+Returns C<'ftos'>.
 
 =item $force10->os_ver()
 
@@ -341,40 +273,6 @@ Returns the VLAN names.
 
 Currently not implemented.
 
-=item $force10->i_vlan_membership()
-
-Returns reference to hash of arrays:
-key = C<ifIndex>, value = array of VLAN IDs.
-These are the VLANs which are members of the egress list for the port.
-
-=item $force10->fw_mac()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $force10->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $force10->c_id()
-
-Returns LLDP information.
-
-=item $force10->c_if()
-
-Returns LLDP information.
-
-=item $force10->c_ip()
-
-Returns LLDP information.
-
-=item $force10->c_platform()
-
-Returns LLDP information.
-
-=item $force10->c_port()
-
-Returns LLDP information.
-
 =item $force10->i_duplex_admin()
 
 Returns info from F<MAU-MIB>

Info/Layer3/Fortinet.pm

@@ -0,0 +1,200 @@
+# SNMP::Info::Layer3::Fortinet
+#
+# Copyright (c) 2014 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Fortinet;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Fortinet::ISA
+    = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Fortinet::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'FORTINET-CORE-MIB'      => 'fnSysSerial',
+    'FORTINET-FORTIGATE-MIB' => 'fgVdMaxVdoms',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+);
+
+sub vendor {
+    return 'fortinet';
+}
+
+sub model {
+    my $fortinet = shift;
+    my $id = $fortinet->id() || '';
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^f[grsw][tfw]?//i;
+    return $model;
+}
+
+sub os {
+    return 'fortios';
+}
+
+sub os_ver {
+    my $fortinet = shift;
+    
+    my $ver = $fortinet->fgSysVersion() || '';
+
+    if ( $ver =~ /(\d+[\.\d]+)/ ) {
+        return $1;
+    }
+    
+    return $ver;
+}
+
+sub serial {
+    my $fortinet = shift;
+    
+    return $fortinet->fnSysSerial();
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Fortinet - SNMP Interface to Fortinet network devices.
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $fortinet = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $fortinet->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Fortinet network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $fortinet = new SNMP::Info::Layer3::Fortinet(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<FORTINET-CORE-MIB>
+
+=item F<FORTINET-FORTIGATE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $fortinet->vendor()
+
+Returns 'fortinet'
+
+=item $fortinet->model()
+
+Returns the chassis model.
+
+=item $fortinet->os()
+
+Returns 'fortios'
+
+=item $fortinet->os_ver()
+
+Returns the software version extracted from (C<systemVersion>).
+
+=item $fortinet->serial()
+
+Returns the chassis serial number.
+
+(C<fnSysSerial>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/H3C.pm

@@ -0,0 +1,250 @@
+# SNMP::Info::Layer3::H3C
+#
+# Copyright (c) 2012 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::H3C;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+use SNMP::Info::IEEE802dot3ad 'agg_ports_lag';
+
+@SNMP::Info::Layer3::H3C::ISA = qw/
+  SNMP::Info::IEEE802dot3ad
+  SNMP::Info::LLDP
+  SNMP::Info::Layer3
+  Exporter
+/;
+@SNMP::Info::Layer3::H3C::EXPORT_OK = qw/
+  agg_ports
+/;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::IEEE802dot3ad::MIBS,
+    'HH3C-LswDEVM-MIB'     => 'hh3cDevMFanStatus',
+    'HH3C-LswINF-MIB'      => 'hh3cSlotPortMax',
+    'HH3C-LSW-DEV-ADM-MIB' => 'hh3cLswSysVersion',
+    'HH3C-PRODUCT-ID-MIB'  => 'hh3c-s5500-28C-EI',
+    'HH3C-ENTITY-VENDORTYPE-OID-MIB' => 'hh3cevtOther',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'fan' => 'hh3cDevMFanStatus.1',
+    'ps1_status' => 'hh3cDevMPowerStatus.1',
+    'ps2_status' => 'hh3cDevMPowerStatus.2',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    i_duplex_admin => 'hh3cifEthernetDuplex',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    my $h3c = shift;
+    my $mfg = $h3c->entPhysicalMfgName(1) || {};
+    return $mfg->{1} || "H3C";
+}
+
+sub os {
+    my $h3c = shift;
+    my $descr   = $h3c->description();
+
+    return $1 if ( $descr =~ /(\S+)\s+Platform Software/ );
+    return "H3C";
+}
+
+sub os_ver {
+    my $h3c = shift;
+    my $descr   = $h3c->description();
+#    my $version = $h3c->hh3cLswSysVersion(); # Don't use, indicates base version only, no release details
+    my $ver_release = $h3c->entPhysicalSoftwareRev(2) || {};
+    my $os_ver  = undef;
+
+    $os_ver = "$1 $2" if ( $descr =~ /Software Version ([^,]+),.*(Release\s\S+)/i );
+    $os_ver = "$1" if ( $descr =~ /Product Version ([0-9.]+)/i );
+
+    return $ver_release->{2} || $os_ver;
+}
+
+sub i_ignore {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+
+        # lo0 etc
+        if ( $interfaces->{$if} =~ /\blo\d*\b/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+sub agg_ports { return agg_ports_lag(@_) }
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::H3C - SNMP Interface to L3 Devices, H3C & HP A-series
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $h3c = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $h3c->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for H3C & HP A-series devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<HH3C-LswDEVM-MIB>
+
+=item F<HH3C-LswINF-MIB>
+
+=item F<HH3C-LSW-DEV-ADM-MIB>
+
+=item F<HH3C-PRODUCT-ID-MIB>
+
+=item F<HH3C-ENTITY-VENDORTYPE-OID-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $h3c->vendor()
+
+Returns value for C<entPhysicalMfgName.1>.
+
+=item $h3c->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $h3c->os_ver()
+
+Returns the software version. Either C<entPhysicalSoftwareRev.2> or extracted from 
+C<sysDescr>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $h3c->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback
+
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=cut

Info/Layer3/HP9300.pm

@@ -42,7 +42,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -196,134 +196,6 @@ sub interfaces {
     return $i_descr;
 }
 
-#  Use FDP and/or LLDP
-
-sub hasCDP {
-    my $hp9300 = shift;
-
-    return $hp9300->hasLLDP() || $hp9300->SUPER::hasCDP();
-}
-
-sub c_ip {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $cdp  = $hp9300->SUPER::c_ip($partial) || {};
-    my $lldp = $hp9300->lldp_ip($partial)     || {};
-
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
-
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
-}
-
-sub c_if {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_if($partial)     || {};
-    my $cdp  = $hp9300->SUPER::c_if($partial) || {};
-
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
-
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
-}
-
-sub c_port {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_port($partial)     || {};
-    my $cdp  = $hp9300->SUPER::c_port($partial) || {};
-
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
-}
-
-sub c_id {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_id($partial)     || {};
-    my $cdp  = $hp9300->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $id = $lldp->{$iid};
-        next unless defined $id;
-
-        $c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $hp9300  = shift;
-    my $partial = shift;
-
-    my $lldp = $hp9300->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $hp9300->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
-}
-
 1;
 __END__
 
@@ -527,54 +399,6 @@ Returns reference to hash.  Current Port Speed.
 
 =back
 
-=head2 Topology information
-
-Based upon the software version devices may support Foundry Discovery
-Protocol (FDP) and Link Layer Discovery Protocol (LLDP). These
-methods will query both and return the combination of all information. As a
-result, there may be identical topology information returned from the two
-protocols causing duplicate entries.  It is the calling program's
-responsibility to identify any duplicate entries and remove duplicates
-if necessary.
-
-=over
-
-=item $hp9300->hasCDP()
-
-Returns true if the device is running either FDP or LLDP.
-
-=item $hp9300->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $hp9300->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-FDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $hp9300->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $hp9300->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $hp9300->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/IBMGbTor.pm

@@ -0,0 +1,407 @@
+# SNMP::Info::Layer3::IBMGbTor - SNMP Interface to IBM Rackswitch devices
+# $Id$
+#
+# Copyright (c) 2013 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::IBMGbTor;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::IBMGbTor::ISA
+    = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::IBMGbTor::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+
+    # LLDP MIBs not loaded to prevent possible unqualified namespace conflict
+    # with IBM definitions
+    'IBM-GbTOR-10G-L2L3-MIB' => 'lldpInfoRemoteDevicesLocalPort',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'temp' => 'hwTempSensors',
+    'fan'  => 'hwFanSpeed',
+
+    # Can't find the equivalent in IBM-GbTOR-10G-L2L3-MIB
+    # use a different strategy for lldp_sys_cap in hasLLDP()
+    #'lldp_sysname' => 'lldpLocSysName',
+    #'lldp_sysdesc' => 'lldpLocSysDesc',
+    #'lldp_sys_cap' => 'lldpLocSysCapEnabled',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+
+    # IBM-GbTOR-10G-L2L3-MIB::portInfoTable
+    'sw_duplex' => 'portInfoMode',
+
+    # Can't find the equivalent in IBM-GbTOR-10G-L2L3-MIB
+    # not currently used in LLDP class
+    #'lldp_lman_addr' => 'lldpLocManAddrIfId',
+
+    # IBM-GbTOR-10G-L2L3-MIB::lldpInfoPortTable
+    'lldp_port_status' => 'lldpInfoPortAdminStatus',
+
+    # IBM-GbTOR-10G-L2L3-MIB::lldpInfoRemoteDevicesTable
+    'lldp_rem_id_type'  => 'lldpInfoRemoteDevicesChassisSubtype',
+    'lldp_rem_id'       => 'lldpInfoRemoteDevicesSystemName',
+    'lldp_rem_pid_type' => 'lldpInfoRemoteDevicesPortSubtype',
+    'lldp_rem_pid'      => 'lldpInfoRemoteDevicesPortId',
+    'lldp_rem_desc'     => 'lldpInfoRemoteDevicesPortDescription',
+    'lldp_rem_sysname'  => 'lldpInfoRemoteDevicesSystemName',
+    'lldp_rem_sysdesc'  => 'lldpInfoRemoteDevicesSystemDescription',
+    'lldp_rem_sys_cap'  => 'lldpInfoRemoteDevicesSystemCapEnabled',
+
+    # IBM-GbTOR-10G-L2L3-MIB::lldpInfoRemoteDevicesManAddrTable
+    'lldp_rman_type' => 'lldpInfoRemoteDevicesManAddrSubtype',
+    'lldp_rman_addr' => 'lldpInfoRemoteDevicesManAddr',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+
+sub hasLLDP {
+    my $ibm = shift;
+
+    # We may be have LLDP, but nothing in lldpRemoteSystemsData Tables
+    # Look to see if LLDP Rx enabled on any port
+    my $lldp_cap = $ibm->lldp_port_status();
+
+    foreach my $if ( keys %$lldp_cap ) {
+        if ( $lldp_cap->{$if} =~ /enabledRx/i ) {
+            return 1;
+        }
+    }
+    return;
+}
+
+sub lldp_ip {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    my $rman_type = $ibm->lldp_rman_type($partial) || {};
+    my $rman_addr = $ibm->lldp_rman_addr($partial) || {};
+
+    my %lldp_ip;
+    foreach my $key ( keys %$rman_addr ) {
+        my $type = $rman_type->{$key};
+        next unless defined $type;
+        next unless $type eq 'ipV4';
+        if ( $key =~ /^(\d+)\./ ) {
+            $lldp_ip{$1} = $rman_addr->{$key};
+        }
+    }
+    return \%lldp_ip;
+}
+
+sub lldp_if {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $lldp_desc = $lldp->lldpInfoRemoteDevicesLocalPort($partial) || {};
+    my $i_descr   = $lldp->i_description()                          || {};
+    my $i_alias   = $lldp->i_alias()                                || {};
+    my %r_i_descr = reverse %$i_descr;
+    my %r_i_alias = reverse %$i_alias;
+
+    my %lldp_if;
+    foreach my $key ( keys %$lldp_desc ) {
+
+    # Cross reference lldpLocPortDesc with ifDescr and ifAlias to get ifIndex,
+    # prefer ifAlias over ifDescr since MIB says 'alias'.
+        my $desc = $lldp_desc->{$key};
+        next unless $desc;
+        my $port = $desc;
+
+    # If cross reference is successful use it, otherwise stick with
+    # lldpRemLocalPortNum
+        if ( exists $r_i_alias{$desc} ) {
+            $port = $r_i_alias{$desc};
+        }
+        elsif ( exists $r_i_descr{$desc} ) {
+            $port = $r_i_descr{$desc};
+        }
+
+        $lldp_if{$key} = $port;
+    }
+    return \%lldp_if;
+}
+
+sub lldp_platform {
+    my $ibm = shift;
+    my $partial = shift;
+
+    return $ibm->lldpInfoRemoteDevicesSystemDescription($partial);
+}
+
+sub i_ignore {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    my $interfaces = $ibm->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|lb|null)/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+sub i_duplex {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    return $ibm->sw_duplex($partial);
+}
+
+sub model {
+    my $ibm   = shift;
+    my $id    = $ibm->id();
+    my $descr = $ibm->description();
+    my $model = &SNMP::translateObj($id);
+
+    if ( $descr =~ /RackSwitch\s(.*)/ ) {
+        return $1;
+    }
+
+    return $model || $id;
+}
+
+sub os {
+    return 'ibm';
+}
+
+sub vendor {
+    return 'ibm';
+}
+
+sub os_ver {
+    my $ibm = shift;
+
+    return $ibm->agSoftwareVersion();
+}
+
+sub interfaces {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    my $i_descr = $ibm->i_description($partial) || {};
+    my $i_name  = $ibm->i_name($partial)        || {};
+
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        $i_descr->{$iid} = $name
+            if $name =~ /^port\d+/i;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::IBMGbTor - SNMP Interface to IBM Rackswitch devices
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ibm = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $ibm->class();
+
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for IBM Rackswitch (formerly Blade Network Technologies)
+network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above.
+
+ my $ibm = new SNMP::Info::Layer3::IBMGbTor(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3;
+
+=item SNMP::Info::LLDP;
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<IBM-GbTOR-10G-L2L3-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ibm->model()
+
+Returns model type.  Attempts to pull model from device description.
+Otherwise checks $ibm->id() against the F<IBM-GbTOR-10G-L2L3-MIB>.
+
+=item $ibm->vendor()
+
+Returns 'ibm'
+
+=item $ibm->os()
+
+Returns 'ibm'
+
+=item $ibm->os_ver()
+
+Returns the software version
+
+(C<agSoftwareVersion>)
+
+=item $ibm->temp()
+
+(C<hwTempSensors>)
+
+=item $ibm->fan()
+
+(C<hwFanSpeed>)
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $ibm->hasLLDP()
+
+Is LLDP is active in this device?  
+
+Note:  LLDP may be active, but nothing in C<lldpRemoteSystemsData> Tables so
+the device would not return any useful topology information.
+
+Checks to see if at least one interface is enabled to receive LLDP packets.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $ibm->interfaces()
+
+Returns reference to hash of interface names to iids.
+
+=item $ibm->i_ignore()
+
+Returns reference to hash of interfaces to be ignored.
+
+Ignores interfaces with descriptions of tunnel, loopback, and null.
+
+=item $ibm->i_duplex()
+
+Returns reference to hash of interface link duplex status. 
+
+(C<portInfoMode>)
+
+=item $ibm->lldp_if()
+
+Returns the mapping to the SNMP Interface Table. Tries to cross reference 
+(C<lldpInfoRemoteDevicesLocalPort>) with (C<ifDescr>) and (C<ifAlias>)
+to get (C<ifIndex>).
+
+=item $ibm->lldp_ip()
+
+Returns remote IPv4 address.  Returns for all other address types, use
+lldp_addr if you want any return address type.
+
+=item $ibm->lldp_platform()
+
+Returns remote device system description.
+
+(C<lldpInfoRemoteDevicesSystemDescription>)
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Juniper.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -53,8 +53,9 @@ $VERSION = '2.11';
 
 %GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, 
 	     %SNMP::Info::LLDP::GLOBALS,
-	     'serial' => 'jnxBoxSerialNo.0',
-	     'mac'    => 'dot1dBaseBridgeAddress',
+	     'serial'    => 'jnxBoxSerialNo.0',
+	     'mac'       => 'dot1dBaseBridgeAddress',
+	     'box_descr' => 'jnxBoxDescr'
 	     );
 
 %FUNCS = ( %SNMP::Info::Layer3::FUNCS, 
@@ -88,6 +89,20 @@ sub os {
     return 'junos';
 }
 
+sub layers {
+    my $juniper = shift;
+    
+    my $layers = $juniper->SUPER::layers();
+    # Some models don't report L2 properly 
+    my $macs   = $juniper->fw_mac();
+    
+    if (keys %$macs) {
+        my $l = substr $layers, 6, 1, "1";
+    }
+
+    return $layers;
+}
+
 sub os_ver {
     my $juniper = shift;
 
@@ -148,6 +163,13 @@ sub i_trunk {
     return \%i_trunk;
 }
 
+sub qb_fdb_index {
+    my $juniper  = shift;
+    my $partial = shift;
+
+    return $juniper->jnxExVlanTag($partial);
+}
+
 # 'v_type'     => 'jnxExVlanType',
 sub v_type {
     my $juniper = shift;
@@ -199,22 +221,24 @@ sub i_vlan {
     return $i_vlan;
 }
 
-sub i_vlan_membership {
-    my $juniper  = shift;
-    my $partial = shift;
+# Index doesn't use VLAN ID, so override the HOA private method here to
+# correct the mapping 
+sub _vlan_hoa {
+    my $juniper = shift;
+    my ( $v_ports, $partial ) = @_;
 
-    my $index = $juniper->bp_index();
-    my ($v_index)  = $juniper->jnxExVlanTag($partial);
+    my $index    = $juniper->bp_index();
+    my $v_index  = $juniper->jnxExVlanTag($partial);
 
-    my $v_ports = $juniper->qb_v_egress() || {};
-
-    my $i_vlan_membership = {};
-
-    foreach my $idx ( sort keys %$v_ports ) {
+    my $vlan_hoa = {};
+    foreach my $idx ( keys %$v_ports ) {
         next unless ( defined $v_ports->{$idx} );
-        my $portlist = $v_ports->{$idx}; # is an array reference
+        my $portlist = $v_ports->{$idx};
         my $ret      = [];
-        my $vlan_ndx = $idx;
+        my $vlan_ndx;
+
+        # Strip TimeFilter if we're using VlanCurrentTable
+        ( $vlan_ndx = $idx ) =~ s/^\d+\.//;
 
         # Convert portlist bit array to bp_index array
         for ( my $i = 0; $i <= $#$portlist; $i++ ) {
@@ -226,69 +250,10 @@ sub i_vlan_membership {
             my $ifindex = $index->{$port};
             next unless ( defined($ifindex) );    # shouldn't happen
             next if ( defined $partial and $ifindex !~ /^$partial$/ );
-            push ( @{ $i_vlan_membership->{$ifindex} }, $v_index->{$vlan_ndx} );
+            push( @{ $vlan_hoa->{$ifindex} }, $v_index->{$vlan_ndx} );
         }
     }
-
-    return $i_vlan_membership;
-}
-
-# Use Q-BRIDGE-MIB for bridge forwarding tables
-sub fw_mac {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->qb_fw_port($partial);
-}
-
-# Use LLDP
-
-sub hasCDP {
-    my $juniper = shift;
-
-    return $juniper->hasLLDP();
-}
-
-sub c_ip {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_ip($partial);
-}
-
-sub c_if {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_if($partial);
-}
-
-sub c_port {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_port($partial);
-}
-
-sub c_id {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_id($partial);
-}
-
-sub c_platform {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->lldp_rem_sysdesc($partial);
+    return $vlan_hoa;
 }
 
 # Pseudo ENTITY-MIB methods
@@ -406,7 +371,7 @@ sub e_descr {
     my $juniper = shift;
 
     my $e_index    = $juniper->e_index() || {};
-    my $box_descr  = $juniper->jnxBoxDescr || 0;
+    my $box_descr  = $juniper->box_descr;
     my $contents   = $juniper->jnxContentsDescr() || {};
     my $containers = $juniper->jnxContainersDescr() || {};
 
@@ -617,7 +582,7 @@ Subclass for Juniper Devices running JUNOS
 
 =over
 
-=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" -- Fri Jan 09 00:00:00 2009 UTC or later.
+=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" or later.
 
 =item F<JUNIPER-CHASSIS-DEFINES-MIB>
 
@@ -647,6 +612,11 @@ Returns 'juniper'
 
 Returns 'junos'
 
+=item $juniper->layers()
+
+Checks forwarding table for Layer 2 support since some routers with switches
+do not report layers properly.
+
 =item $juniper->os_ver()
 
 Returns the software version extracted first from C<sysDescr> or
@@ -663,16 +633,18 @@ Returns serial number
 
 (C<jnxBoxSerialNo.0>)
 
-=item $juniper->serial()
+=item $juniper->mac()
 
 Returns the MAC address used by this bridge when it must be referred
 to in a unique fashion.
 
 (C<dot1dBaseBridgeAddress>)
 
-=item $juniper->hasCDP()
+=item $juniper->box_descr()
 
-Returns whether LLDP is enabled.
+The name, model, or detailed description of the device.
+
+(C<jnxBoxDescr.0>)
 
 =back
 
@@ -691,6 +663,10 @@ to a hash.
 
 =over
 
+=item $juniper->qb_fdb_index()
+
+Returns reference to hash: key = VLAN ID, value = FDB ID.
+
 =item $juniper->v_index()
 
 (C<jnxExVlanTag>)
@@ -711,61 +687,8 @@ to a hash.
 
 Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
-=item $juniper->i_vlan_membership()
-
-Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
-IDs.  These are the VLANs which are members of the egress list for the port.
-
 =back
 
-=head2 Topology information
-
-These methods return Link Layer Discovery Protocol (LLDP) information.  See
-documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
-=over
-
-=item $juniper->c_id()
-
-Returns C<lldp_id>
-
-=item $juniper->c_if()
-
-Returns C<lldp_if>
-
-=item $juniper->c_ip()
-
-Returns C<lldp_ip>
-
-=item $juniper->c_platform()
-
-Returns C<lldp_rem_sysdesc>
-
-=item $juniper->c_port()
-
-Returns C<lldp_port>
-
-=back
-
-=head2 Forwarding Table (C<dot1dTpFdbEntry>)
-
-=over 
-
-=item $juniper->fw_mac()
-
-Returns reference to hash of forwarding table MAC Addresses
-
-(C<dot1dTpFdbAddress>)
-
-=item $juniper->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid)
-
-(C<dot1dTpFdbPort>)
-
-=back 
-
 =head2 Pseudo F<ENTITY-MIB> information
 
 These methods emulate F<ENTITY-MIB> Physical Table methods using

Info/Layer3/Lantronix.pm

@@ -0,0 +1,271 @@
+# SNMP::Info::Layer3::Lantronix
+# $Id$
+#
+# Copyright (c) 2012 J R Binks
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Lantronix;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Lantronix::ISA = qw/
+    SNMP::Info::Layer3
+    Exporter
+    /;
+@SNMP::Info::Layer3::Lantronix::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'LANTRONIX-MIB'     => 'products',
+    'LANTRONIX-SLC-MIB' => 'slcNetwork',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'slc_os_ver'       => 'slcSystemFWRev',
+    'slc_serial'       => 'slcSystemSerialNo',
+    'slc_model'        => 'slcSystemModel',
+    'slc_psu_a_status' => 'slcDevPowerSupplyA',
+    'slc_psu_b_status' => 'slcDevPowerSupplyB',
+);
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+# General notes:
+#
+# Products like the EDS have very minimal MIB support for the basics.
+# Much information has to be derived from sysDescr string.
+#
+sub vendor {
+    return 'lantronix';
+}
+
+sub os {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $os;
+
+    # On EDS, it is called the "Evolution OS"
+    # Not sure what, if any, name it has a name on other products
+    $os = 'EvolutionOS' if ( $descr =~ m/Lantronix EDS\w+ V([\d\.R]+)/ );
+
+    return 'LantronixOS';
+}
+
+sub os_ver {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_os_ver = $device->slc_os_ver;
+    my $os_ver;
+
+    return $slc_os_ver if defined $slc_os_ver;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $os_ver = $1 if ( $descr =~ m/Lantronix EDS\w+ V([\d\.R]+)/ );
+
+    return $os_ver;
+}
+
+sub serial {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_serial = $device->slc_serial;
+    my $serial;
+
+    return $slc_serial if defined $slc_serial;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $serial = $1 if ( $descr =~ m/Lantronix EDS\w+ V[\d\.R]+ \((\w+)\)/ );
+
+    return $serial;
+}       
+
+sub model {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_model = $device->slc_model;
+    my $model;
+
+    return $slc_model if defined $slc_model;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $model = $1 if ( $descr =~ m/Lantronix (EDS\w+)/ );
+
+    return $model;
+}
+
+sub ps1_status {
+    my $device = shift;
+    my $slc_psu_a_status = $device->slc_psu_a_status;
+
+    return $slc_psu_a_status if defined $slc_psu_a_status;
+
+    return;
+}
+
+sub ps2_status {
+    my $device = shift;
+    my $slc_psu_b_status = $device->slc_psu_b_status;
+
+    return $slc_psu_b_status if defined $slc_psu_b_status;
+
+    return;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Lantronix - SNMP Interface to Lantronix devices such as terminal servers
+
+=head1 AUTHOR
+
+J R Binks
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $device = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'mydevice',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $device->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Lantronix devices such as terminal servers.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<LANTRONIX-MIB>
+
+=item F<LANTRONIX-SLC-MIB>
+
+=back
+
+=head2 Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP.
+
+=over
+
+=item $device->vendor()
+
+Returns 'lantronix'.
+
+=item $device->os()
+
+Returns 'EvolutionOS' for EDS devices.
+
+=item $device->os_ver()
+
+Returns the software version.
+
+=item $device->model()
+
+Returns the model.
+
+=item $device->serial()
+
+Returns the serial number.
+
+=item $device->ps1_status()
+
+Power supply 1 status
+
+=item $device->ps2_status()
+
+Power supply 2 status
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $device->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+=back
+
+=head2 Lantronix specific items
+
+None at present.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Microsoft.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, );
 

Info/Layer3/Mikrotik.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -50,17 +50,30 @@ $VERSION = '2.11';
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
     'hrSystemUptime' => 'hrSystemUptime',
+    'os_level'       => 'mtxrLicLevel',
     'os_ver'         => 'mtxrLicVersion',
+    'serial1'        => 'mtxrSystem.3.0',
+    'firmware'       => 'mtxrSystem.4.0',
+    'fan_type'       => 'mtxrHlActiveFan',
 );
 
-%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+);
 
-%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+);
 
 sub vendor {
     return 'mikrotik';
 }
 
+sub serial {
+    my $mikrotik = shift;
+    return $mikrotik->serial1;
+}
+
 sub model {
     my $mikrotik = shift;
     my $descr = $mikrotik->description() || '';
@@ -73,6 +86,18 @@ sub os {
     return 'routeros';
 }
 
+sub board_temp {
+    my $mikrotik = shift;
+    my $temp = $mikrotik->mtxrHlTemperature;
+    return $temp / 10.0;
+}
+
+sub cpu_temp {
+    my $mikrotik = shift;
+    my $temp = $mikrotik->mtxrHlProcessorTemperature;
+    return $temp / 10.0;
+}
+
 1;
 __END__
 
@@ -134,11 +159,11 @@ These are methods that return scalar value from SNMP
 
 =item $mikrotik->vendor()
 
-Returns 'mikrotik'.
+Returns C<'mikrotik'>.
 
 =item $mikrotik->os()
 
-Returns 'routeros'.
+Returns C<'routeros'>.
 
 =item $mikrotik->model()
 
@@ -148,6 +173,23 @@ Tries to extract the device model from C<sysDescr>.
 
 Returns the value of C<mtxrLicVersion>.
 
+=item $mikrotik->os_level()
+
+Returns the value of RouterOS level C<mtxrLicLevel>
+
+=item $mikrotik->board_temp()
+=item $mikrotik->cpu_temp()
+
+Returns the appropriate temperature values
+
+=item $mikrotik->serial()
+
+Returns the device serial.
+
+=item $mikrotik->firmware()
+
+Returns the firmware version of hardware.
+
 =back
 
 =head2 Globals imported from SNMP::Info::Layer3

Info/Layer3/N1600.pm

@@ -41,7 +41,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -93,7 +93,7 @@ sub model {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub os {
@@ -174,7 +174,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::N1600 - SNMP Interface to Nortel 16XX Network Devices
+SNMP::Info::Layer3::N1600 - SNMP Interface to Avaya/Nortel 16XX Network
+Devices
 
 =head1 AUTHOR
 
@@ -198,8 +199,8 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Nortel 
-N16XX device through SNMP. 
+Provides abstraction to the configuration information obtainable from an
+Avaya/Nortel N16XX device through SNMP. 
 
 For speed or debugging purposes you can call the subclass directly, but not
 after determining a more specific class using the method above. 
@@ -247,7 +248,7 @@ F<RAPID-CITY-MIB> and then parses out C<rcA>.
 
 =item $n1600->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $n1600->os()
 

Info/Layer3/NetSNMP.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -130,42 +130,6 @@ sub i_ignore {
     return \%i_ignore;
 }
 
-# Use LLDP
-sub hasCDP {
-    my $netsnmp = shift;
-    return $netsnmp->hasLLDP();
-}
-
-sub c_ip {
-    my $netsnmp  = shift;
-    my $partial = shift;
-    return $netsnmp->lldp_ip($partial);
-}
-
-sub c_if {
-    my $netsnmp  = shift;
-    my $partial = shift;
-    return $netsnmp->lldp_if($partial);
-}
-
-sub c_port {
-    my $netsnmp  = shift;
-    my $partial = shift;
-    return $netsnmp->lldp_port($partial);
-}
-
-sub c_id {
-    my $netsnmp  = shift;
-    my $partial = shift;
-    return $netsnmp->lldp_id($partial);
-}
-
-sub c_platform {
-    my $netsnmp  = shift;
-    my $partial = shift;
-    return $netsnmp->lldp_rem_sysdesc($partial);
-}
-
 1;
 __END__
 
@@ -278,46 +242,6 @@ Ignores loopback
 
 =back
 
-=head2 Topology information
-
-Link Layer Discovery Protocol (LLDP) support.  The device must be running
-an optional LLDP agent, such as lldpd, which can integrate with the SNMP agent. 
-
-=over
-
-=item $netsnmp->hasCDP()
-
-Returns true if the device is running LLDP.
-
-=item $netsnmp->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $netsnmp->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $netsnmp->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $netsnmp->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $netsnmp->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3> for details.

Info/Layer3/Netscreen.pm

@@ -1,7 +1,6 @@
 # SNMP::Info::Layer3::Netscreen
-# $Id$
 #
-# Copyright (c) 2008 Eric Miller
+# Copyright (c) 2012 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -33,34 +32,62 @@ package SNMP::Info::Layer3::Netscreen;
 use strict;
 use Exporter;
 use SNMP::Info::Layer3;
+use SNMP::Info::IEEE802dot11;
 
-@SNMP::Info::Layer3::Netscreen::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Netscreen::ISA
+    = qw/SNMP::Info::Layer3 SNMP::Info::IEEE802dot11 Exporter/;
 @SNMP::Info::Layer3::Netscreen::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::IEEE802dot11::MIBS,
     'NETSCREEN-SMI'           => 'netscreenSetting',
     'NETSCREEN-PRODUCTS-MIB'  => 'netscreenGeneric',
     'NETSCREEN-INTERFACE-MIB' => 'nsIfIndex',
     'NETSCREEN-SET-GEN-MIB'   => 'nsSetGenSwVer',
+    'NETSCREEN-IP-ARP-MIB'    => 'nsIpArpAOD',
 );
 
-%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, 'os_version' => 'nsSetGenSwVer', );
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::IEEE802dot11::GLOBALS,
+    'os_version' => 'nsSetGenSwVer',
+);
 
-%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
 
-%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+    ns_i_index       => 'nsIfIndex',
+    ns_i_name        => 'nsIfName',
+    ns_i_description => 'nsIfDescr',
+    ns_i_mac         => 'nsIfMAC',
+    ns_i_up          => 'nsIfStatus',
+    ns_ip_table      => 'nsIfIp',
+    ns_ip_netmask    => 'nsIfNetmask',
+    bp_index         => 'nsIfInfo',
+    std_at_paddr     => 'ipNetToMediaPhysAddress',
+    ns_at_paddr      => 'nsIpArpMac',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::IEEE802dot11::MUNGE,
+    'ns_i_mac'     => \&SNMP::Info::munge_mac,
+    'ns_at_paddr'  => \&SNMP::Info::munge_mac,
+    'std_at_paddr' => \&SNMP::Info::munge_mac,
+);
 
 sub layers {
-    return '01001100';
+    return '01001110';
 }
 
 sub vendor {
-    return 'netscreen';
+    return 'juniper';
 }
 
 sub os {
@@ -112,6 +139,372 @@ sub model {
     return $model;
 }
 
+# provides mapping from IF-MIB to nsIf interfaces - many to 1 (!)
+# - on WLAN devices wireless0/0(|-[ag]) -> wireless0/0 !!
+sub _if_nsif_map {
+    my $netscreen   = shift;
+    my $i_descr     = $netscreen->SUPER::i_description;
+    my $ns_descr    = $netscreen->i_description;
+    my %if_nsif_map = ();
+    my @ikeys       = sort { $a <=> $b } keys %$i_descr;
+    my @nskeys      = sort { $a <=> $b } keys %$ns_descr;
+    my $i           = 0;
+    my $n           = 0;
+
+    # assumes descriptions are in the same order from both walks
+    while ( $i < @ikeys && $n < @nskeys ) {
+
+        # find matching sub interfaces
+        while (
+            $i < @ikeys
+            && substr(
+                $i_descr->{ $ikeys[$i] },
+                0,
+                length $ns_descr->{ $nskeys[$n] }
+            ) eq $ns_descr->{ $nskeys[$n] }
+            )
+        {
+
+            $if_nsif_map{ $ikeys[$i] } = $nskeys[$n];
+            $i++;
+        }
+
+        $n++;
+
+        # skip non-matching interfaces (e.g. tunnel.N)
+        while (
+            $i < @ikeys
+            && substr(
+                $i_descr->{ $ikeys[$i] },
+                0,
+                length $ns_descr->{ $nskeys[$n] }
+            ) ne $ns_descr->{ $nskeys[$n] }
+            && $n < @nskeys
+            )
+        {
+
+            $if_nsif_map{ $ikeys[$i] } = 0;    # no matching interface
+            $i++;
+        }
+    }
+
+    return \%if_nsif_map;
+}
+
+# Provides mapping from nsIf interfaces to IF-MIB interfaces - many to 1
+# Example, tunnel.# interfaces are not present in IF-MIB.  There exist no
+# mapping of index IID's between the tables so create mapping based on names
+sub _nsif_if_map {
+    my $netscreen = shift;
+
+    my $i_descr      = $netscreen->SUPER::i_description;
+    my $ns_descr     = $netscreen->i_description;
+    my %rev_i_descr  = reverse %$i_descr;
+    my %rev_ns_descr = reverse %$ns_descr;
+
+    my %nsif_if_map = ();
+    foreach my $value ( values %$ns_descr ) {
+        if ( exists $rev_i_descr{$value} ) {
+            $nsif_if_map{ $rev_ns_descr{$value} } = $rev_i_descr{$value};
+        }
+        else {
+            $nsif_if_map{ $rev_ns_descr{$value} } = 0;
+        }
+    }
+    return \%nsif_if_map;
+}
+
+sub interfaces {
+    my $netscreen = shift;
+    return $netscreen->i_description();
+}
+
+sub i_index {
+    my $netscreen = shift;
+    return $netscreen->ns_i_index();
+}
+
+sub i_name {
+    my $netscreen = shift;
+    return $netscreen->ns_i_name();
+}
+
+sub i_description {
+    my $netscreen = shift;
+
+    # Versions prior to 5.4 do not support nsIfDescr but do have nsIfName
+    return $netscreen->ns_i_description() || $netscreen->ns_i_name();
+}
+
+sub i_mac {
+    my $netscreen = shift;
+
+    my $ns_mac   = $netscreen->ns_i_mac()     || {};
+    my $if_i_mac = $netscreen->SUPER::i_mac() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+
+    my %i_mac = ();
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_mac{$iid} = $ns_mac->{$iid} || $if_i_mac->{ $ns_i_map->{$iid} };
+    }
+
+    return \%i_mac;
+}
+
+sub i_lastchange {
+    my $netscreen = shift;
+
+    my $if_i_lastchange = $netscreen->SUPER::i_lastchange() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_lastchange;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_lastchange{$iid} = $if_i_lastchange->{ $ns_i_map->{$iid} };
+    }
+    return \%i_lastchange;
+}
+
+sub i_up {
+    my $netscreen = shift;
+    return $netscreen->ns_i_up();
+}
+
+sub i_up_admin {
+    my $netscreen  = shift;
+    my $i_up       = $netscreen->i_up();
+    my $i_up_admin = $netscreen->SUPER::i_up_admin();
+    my $ns_i_map   = $netscreen->_nsif_if_map();
+    my %i_up_admin;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_up_admin{$iid} 
+            = $i_up->{$iid} eq "up" && "up"
+            || $i_up_admin->{ $ns_i_map->{$iid} }
+            || 0;
+    }
+    return \%i_up_admin;
+}
+
+sub i_type {
+    my $netscreen = shift;
+
+    my $if_i_type = $netscreen->SUPER::i_type() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_type;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_type{$iid} = $if_i_type->{ $ns_i_map->{$iid} } || "tunnel";
+    }
+    return \%i_type;
+}
+
+sub i_mtu {
+    my $netscreen = shift;
+
+    my $i_type = $netscreen->SUPER::i_mtu() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_mtu;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_mtu{$iid} = $i_type->{ $ns_i_map->{$iid} };
+    }
+    return \%i_mtu;
+}
+
+sub i_ignore {
+    return;
+}
+
+sub i_speed {
+    my $netscreen = shift;
+
+    my $i_speed  = $netscreen->SUPER::i_speed();
+    my $i_name   = $netscreen->i_name();
+    my $ns_i_map = $netscreen->_nsif_if_map;
+    my %i_speed;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_speed{$iid} 
+            = $i_speed->{ $ns_i_map->{$iid} }
+            || $i_name->{$iid} =~ /tunnel/ && "vpn"
+            || 0;
+    }
+    return \%i_speed;
+}
+
+sub _mac_map {
+    my $netscreen = shift;
+
+    my $arp_mac = $netscreen->nsIpArpMac() || {};
+
+    my %mac_map = ();
+    foreach my $iid ( keys %$arp_mac ) {
+        my $oid = join( ".", ( unpack( "C6", $arp_mac->{$iid} ) ) );
+        $mac_map{$oid} = $iid;
+    }
+    return \%mac_map;
+}
+
+# Interfaces can have two addresses, we want to capture both the network
+# address and the management address
+sub ip_index {
+    my $netscreen = shift;
+
+    my $ns_ip     = $netscreen->ns_ip_table() || {};
+    my $if_mng_ip = $netscreen->nsIfMngIp()   || {};
+
+    my %ip_index = ();
+    foreach my $iid ( keys %$ns_ip ) {
+        $ip_index{ $ns_ip->{$iid} } = $iid if $ns_ip->{$iid} ne "0.0.0.0";
+    }
+    foreach my $iid ( keys %$if_mng_ip ) {
+        $ip_index{ $if_mng_ip->{$iid} } = $iid
+            if $if_mng_ip->{$iid} ne "0.0.0.0";
+    }
+    return \%ip_index;
+}
+
+sub ip_table {
+    my $netscreen = shift;
+
+    my $ip_index  = $netscreen->ip_index()  || {};
+    my $if_mng_ip = $netscreen->nsIfMngIp() || {};
+
+    my %ip_table = ();
+    foreach my $iid ( keys %$ip_index ) {
+        my $mgmt_ip = $if_mng_ip->{$iid};
+
+        if ( defined $mgmt_ip && $mgmt_ip ne '0.0.0.0' ) {
+            $ip_table{$iid} = $mgmt_ip;
+        }
+        else {
+            $ip_table{$iid} = $iid;
+        }
+    }
+    return \%ip_table;
+}
+
+# There is only one netmask for the interface both network and management
+# addresses should have the same netmask
+sub ip_netmask {
+    my $netscreen = shift;
+
+    my $ip_index = $netscreen->ip_index() || {};
+    my $ns_netmask = $netscreen->ns_ip_netmask();
+
+    my %ip_netmask = ();
+    foreach my $iid ( keys %$ip_index ) {
+        $ip_netmask{$iid} = $ns_netmask->{ $ip_index->{$iid} };
+    }
+    return \%ip_netmask;
+}
+
+sub fw_index {
+    my $netscreen = shift;
+    my %fw_index  = ();
+    my $arp_mac   = $netscreen->nsIpArpMac() || {};
+
+    foreach my $iid ( keys %$arp_mac ) {
+        my $oid = join( ".", ( unpack( "C6", $arp_mac->{$iid} ) ) );
+        $fw_index{$iid} = $oid;
+    }
+    return \%fw_index;
+}
+
+sub fw_mac {
+    my $netscreen = shift;
+
+    my $mac_map = $netscreen->_mac_map() || {};
+
+    my %fw_mac = ();
+    foreach my $oid ( keys %$mac_map ) {
+        my $mac
+            = join( ":", ( map { sprintf "%lx", $_ } split( /\./, $oid ) ) );
+        $fw_mac{$oid} = $mac;
+    }
+    return \%fw_mac;
+}
+
+sub bp_index {
+    my $netscreen = shift;
+
+    my $if_info = $netscreen->nsIfInfo() || {};
+
+    my %bp_index = ();
+    foreach my $iid ( keys %$if_info ) {
+        $bp_index{ $if_info->{$iid} } = $iid;
+    }
+    return \%bp_index;
+}
+
+sub fw_port {
+    my $netscreen = shift;
+
+    my $fw_index = $netscreen->fw_index();
+    my $arp_if = $netscreen->nsIpArpIfIdx() || {};
+
+    my %fw_port;
+    foreach my $iid ( keys %$arp_if ) {
+        $fw_port{ $fw_index->{$iid} } = $arp_if->{$iid}
+            if defined $fw_index->{$iid};
+    }
+    return \%fw_port;
+}
+
+# need to remap from IF-MIB index to nsIf index
+sub i_ssidlist {
+    my $netscreen = shift;
+
+    my $i_ssidlist = $netscreen->SUPER::i_ssidlist() || {};
+    my $ns_i_map = $netscreen->_if_nsif_map();
+
+    my %i_ssidlist;
+    foreach my $iid ( keys %$i_ssidlist ) {
+        $i_ssidlist{ $ns_i_map->{$iid} } = $i_ssidlist->{$iid};
+    }
+    return \%i_ssidlist;
+}
+
+sub i_80211channel {
+    my $netscreen = shift;
+
+    my $i_80211channel = $netscreen->SUPER::i_80211channel() || {};
+    my $ns_i_map = $netscreen->_if_nsif_map();
+
+    my %i_80211channel;
+    foreach my $iid ( keys %$i_80211channel ) {
+        $i_80211channel{ $ns_i_map->{$iid} } = $i_80211channel->{$iid};
+    }
+    return \%i_80211channel;
+}
+
+sub at_index {
+    my $netscreen = shift;
+
+    my $std = $netscreen->ipNetToMediaIfIndex();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->nsIpArpIfIdx();
+}
+
+sub at_paddr {
+    my $netscreen = shift;
+
+    my $std = $netscreen->std_at_paddr();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->ns_at_paddr();
+}
+
+sub at_netaddr {
+    my $netscreen = shift;
+
+    my $std = $netscreen->ipNetToMediaNetAddress();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->nsIpArpIp();
+}
+
 1;
 
 __END__
@@ -144,8 +537,10 @@ Kent Hamilton
 =head1 DESCRIPTION
 
 Provides abstraction to the configuration information obtainable from a 
-Netscreen device through SNMP. See inherited classes' documentation for 
-inherited methods.
+Juniper Netscreen devices through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
 my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
 
@@ -155,6 +550,8 @@ my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
 
 =item SNMP::Info::Layer3
 
+=item SNMP::Info::IEEE802dot11
+
 =back
 
 =head2 Required MIBs
@@ -169,9 +566,13 @@ my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
 
 =item F<NETSCREEN-SET-GEN-MIB>
 
-=item Inherited Classes
+=item F<NETSCREEN-IP-ARP-MIB>
 
-See L<SNMP::Info::Layer3/"Required MIBs"> and its inherited classes.
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
 
 =back
 
@@ -183,11 +584,11 @@ These are methods that return scalar value from SNMP
 
 =item $netscreen->model()
 
-(C<chassisModel>)
+Tries to reference $netscreen->id() to F<NETSCREEN-PRODUCTS-MIB>
 
 =item $netscreen->vendor()
 
-Returns 'netscreen'
+Returns C<'juniper'>
 
 =item $netscreen->os()
 
@@ -199,7 +600,7 @@ Extracts the OS version from the description string.
 
 =item $netscreen->serial()
 
-Returns serial number..
+Returns serial number.
 
 =back
 
@@ -209,8 +610,8 @@ Returns serial number..
 
 =item $netscreen->layers()
 
-Returns 01001100.  Device doesn't report layers properly, modified to reflect 
-Layer3 functionality.
+Returns 01001110.  Device doesn't report layers properly, modified to reflect 
+Layer 2 and 3 functionality.
 
 =back
 
@@ -218,14 +619,193 @@ Layer3 functionality.
 
 See L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
+
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
+=head2 Overrides
+
+=head3 Interface Information
+
+=over
+
+=item $netscreen->interfaces()
+
+Creates a map between the interface identifier (iid) and the physical port
+name.
+
+Defaults to C<insIfDescr> if available, uses C<nsIfName> if not.
+
+=item $netscreen->i_description() 
+
+Description of the interface. Uses C<insIfDescr> if available, C<nsIfName>
+if not.
+
+=item $netscreen->i_ignore()
+
+Returns without defining any interfaces to ignore.
+
+=item $netscreen->i_index()
+
+Default SNMP IID to Interface index.
+
+(C<nsIfIndex>)
+
+=item $netscreen->i_lastchange()
+
+The value of C<sysUpTime> when this port last changed states (up,down), 
+maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifLastChange>)
+
+=item $netscreen->i_mac() 
+
+MAC address of the interface.  Note this is just the MAC of the port, not
+anything connected to it.  Uses C<nsIfMAC> if available, C<ifPhysAddress>
+if not.
+
+=item $netscreen->i_mtu()
+
+INTEGER. Interface MTU value, maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifMtu>)
+
+=item $netscreen->i_name()
+
+Interface Name field.
+
+(C<nsIfName>)
+
+=item $netscreen->i_speed()
+
+Speed of the link, maps from C<ifIndex> to C<nsIfIndex>.
+
+=item $netscreen->i_type()
+
+Interface type.  Maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifType>)
+
+=item $netscreen->i_up() 
+
+Link Status of the interface.  Typical values are 'up' and 'down'.
+
+(C<nsIfStatus>)
+
+=item $netscreen->i_up_admin()
+
+Administrative status of the port.  Checks both C<ifAdminStatus> and
+C<nsIfStatus>.
+
+=back
+
+=head3 IP Address Table
+
+Each entry in this table is an IP address in use on this device.
+
+=over
+
+=item $netscreen->ip_index()
+
+Maps the IP Table to the IID
+
+=item $netscreen->ip_table()
+
+Maps the Table to the IP address
+
+(C<nsIfIp>)
+
+=item $netscreen->ip_netmask()
+
+Gives netmask setting for IP table entry.
+
+(C<nsIfNetmask>)
+
+=back
+
+=head3 Forwarding Table
+
+Uses C<nsIpArpTable> to emulate the forwarding table.
+
+=over 
+
+=item $netscreen->fw_index()
+
+Maps the Forwarding Table to the IID
+
+=item $netscreen->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses.
+
+=item $netscreen->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (IID).
+
+=item $netscreen->bp_index()
+
+Returns reference to hash of bridge port table entries map back to interface
+identifier (IID).
+
+=back
+
+=head2 Arp Cache Table
+
+=over
+
+=item $netscreen->at_index()
+
+Returns reference to hash.  Maps ARP table entries to Interface IIDs 
+
+If the device doesn't support C<ipNetToMediaIfIndex>, this will try
+the proprietary C<nsIpArpIfIdx>.
+
+=item $netscreen->at_paddr()
+
+Returns reference to hash.  Maps ARP table entries to MAC addresses. 
+
+If the device doesn't support C<ipNetToMediaPhysAddress>, this will try
+the proprietary C<nsIpArpMac>.
+
+=item $netscreen->at_netaddr()
+
+Returns reference to hash.  Maps ARP table entries to IP addresses. 
+
+If the device doesn't support C<ipNetToMediaNetAddress>, this will try
+the proprietary C<nsIpArpIp>.
+
+=back
+
+=head3 Wireless Information
+
+=over 
+
+=item $dot11->i_ssidlist()
+
+Returns reference to hash.  SSID's recognized by the radio interface.
+Remaps from C<ifIndex> to C<nsIfIndex>.
+
+(C<dot11DesiredSSID>)
+
+=item $dot11->i_80211channel()
+
+Returns reference to hash.  Current operating frequency channel of the radio
+interface.  Remaps from C<ifIndex> to C<nsIfIndex>.
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
+
 =cut
 

Info/Layer3/Nexus.pm

@@ -1,6 +1,6 @@
 # SNMP::Info::Layer3::Nexus
 #
-# Copyright (c) 2012 Eric Miller
+# Copyright (c) 2014 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -30,38 +30,23 @@
 package SNMP::Info::Layer3::Nexus;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
-use SNMP::Info::CiscoVTP;
+use SNMP::Info::Layer3::CiscoSwitch;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::Nexus::ISA = qw/
-    SNMP::Info::CiscoVTP 
-    SNMP::Info::CiscoStpExtensions
-    SNMP::Info::LLDP
-    SNMP::Info::CDP 
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
-    Exporter
-/;
+	SNMP::Info::Layer3::CiscoSwitch
+	Exporter
+	/;
 
 @SNMP::Info::Layer3::Nexus::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -70,234 +55,170 @@ $VERSION = '2.11';
 # The @ISA order should be reverse of these orders.
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,
-    %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::LLDP::MIBS,
-    %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,
-    'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
+	%SNMP::Info::Layer3::CiscoSwitch::MIBS,
+	'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
-    'mac' => 'dot1dBaseBridgeAddress',
+	%SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
+	'mac' => 'dot1dBaseBridgeAddress',
 );
 
-%FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,
-    %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,
-    %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
-);
+%FUNCS = ( %SNMP::Info::Layer3::CiscoSwitch::FUNCS, );
 
-
-%MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,
-    %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         
-    %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,
-    %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,    
-);
-
-sub cisco_comm_indexing { return 1; }
-
-sub vendor {
-    return 'cisco';
-}
+%MUNGE = ( %SNMP::Info::Layer3::CiscoSwitch::MUNGE, );
 
 sub os {
-    return 'nx-os';
+	return 'nx-os';
 }
 
 sub os_ver {
-    my $nexus = shift; 
-    my $descr = $nexus->description();
-    
-    return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
-    return $descr;
+	my $nexus = shift;
+	my $descr = $nexus->description();
+
+	return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
+	return $descr;
 }
 
 sub serial {
-    my $nexus = shift;
+	my $nexus = shift;
 
-    my $e_class = $nexus->e_class();
+	my $e_parent = $nexus->e_parent();
 
-    foreach my $iid ( keys %$e_class ) {
-        my $class = $e_class->{$iid} || '';
-        if ($class =~ /chassis/) {
-	    my $serial = $nexus->e_serial($iid);
-	    return $serial->{$iid};
+	foreach my $iid ( keys %$e_parent ) {
+		my $parent = $e_parent->{$iid};
+		if ( $parent eq '0' ) {
+			my $serial = $nexus->e_serial($iid);
+			return $serial->{$iid};
+		}
 	}
-    }    
-    return;
+	return;
 }
 
 # sysObjectID returns an IID to an entry in the CISCO-ENTITY-VENDORTYPE-OID-MIB.
 # Look it up and return it.
 sub model {
-    my $nexus = shift;
-    my $id    = $nexus->id();
+	my $nexus = shift;
+	my $id    = $nexus->id();
 
-    unless ( defined $id ) {
-        print
-            " SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
-            if $nexus->debug();
-        return;
-    }
+	unless ( defined $id ) {
+		print
+			" SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
+			if $nexus->debug();
+		return;
+	}
 
-    my $model = &SNMP::translateObj($id);
+	my $model = &SNMP::translateObj($id);
 
-    return $id unless defined $model;
+	return $id unless defined $model;
 
-    $model =~ s/^cevChassis//i;
-    return $model;
+	$model =~ s/^cevChassis//i;
+	return $model;
 }
 
-#  Use CDP and/or LLDP
-sub hasCDP {
-    my $nexus = shift;
+# Reported version 6.x of NX-OS doesn't use the IPv4 address as index
+# override methods in ipAddrTable
+sub ip_table {
+	my $nexus         = shift;
+	my $orig_ip_table = $nexus->orig_ip_table();
 
-    return $nexus->hasLLDP() || $nexus->SUPER::hasCDP();
+	my %ip_table;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip = $orig_ip_table->{$iid};
+		next unless defined $ip;
+
+		$ip_table{$ip} = $ip;
+	}
+
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_table{$addr} = $addr unless exists $ip_table{$addr};
+	}
+
+	return \%ip_table;
 }
 
-sub c_ip {
-    my $nexus   = shift;
-    my $partial = shift;
+sub ip_index {
+	my $nexus         = shift;
+	my $orig_ip_table = $nexus->orig_ip_table();
+	my $orig_ip_index = $nexus->orig_ip_index();
 
-    my $cdp  = $nexus->SUPER::c_ip($partial) || {};
-    my $lldp = $nexus->lldp_ip($partial)     || {};
+	my %ip_index;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip    = $orig_ip_table->{$iid};
+		my $index = $orig_ip_index->{$iid};
 
-    my %c_ip;
-    foreach my $iid ( keys %$cdp ) {
-        my $ip = $cdp->{$iid};
-        next unless defined $ip;
+		next unless ( defined $ip && defined $index );
 
-        $c_ip{$iid} = $ip;
-    }
+		$ip_index{$ip} = $index;
+	}
 
-    foreach my $iid ( keys %$lldp ) {
-        my $ip = $lldp->{$iid};
-        next unless defined $ip;
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_index{$addr} = 0 unless exists $ip_index{$addr};
+	}
 
-        $c_ip{$iid} = $ip;
-    }
-    return \%c_ip;
+	return \%ip_index;
 }
 
-sub c_if {
-    my $nexus   = shift;
-    my $partial = shift;
+sub ip_netmask {
+	my $nexus           = shift;
+	my $orig_ip_table   = $nexus->orig_ip_table();
+	my $orig_ip_netmask = $nexus->orig_ip_netmask();
 
-    my $lldp = $nexus->lldp_if($partial)     || {};
-    my $cdp  = $nexus->SUPER::c_if($partial) || {};
+	my %ip_netmask;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip      = $orig_ip_table->{$iid};
+		my $netmask = $orig_ip_netmask->{$iid};
 
-    my %c_if;
-    foreach my $iid ( keys %$cdp ) {
-        my $if = $cdp->{$iid};
-        next unless defined $if;
+		next unless ( defined $ip && defined $netmask );
 
-        $c_if{$iid} = $if;
-    }
+		$ip_netmask{$ip} = $netmask;
+	}
 
-    foreach my $iid ( keys %$lldp ) {
-        my $if = $lldp->{$iid};
-        next unless defined $if;
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_netmask{$addr} = $local_addrs->{$addr} unless exists $ip_netmask{$addr};
+	}
 
-        $c_if{$iid} = $if;
-    }
-    return \%c_if;
+	return \%ip_netmask;
 }
 
-sub c_port {
-    my $nexus   = shift;
-    my $partial = shift;
+sub ip_broadcast {
+	my $nexus             = shift;
+	my $orig_ip_table     = $nexus->orig_ip_table();
+	my $orig_ip_broadcast = $nexus->orig_ip_broadcast();
 
-    my $lldp = $nexus->lldp_port($partial)     || {};
-    my $cdp  = $nexus->SUPER::c_port($partial) || {};
+	my %ip_broadcast;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip        = $orig_ip_table->{$iid};
+		my $broadcast = $orig_ip_broadcast->{$iid};
 
-    my %c_port;
-    foreach my $iid ( keys %$cdp ) {
-        my $port = $cdp->{$iid};
-        next unless defined $port;
+		next unless ( defined $ip && defined $broadcast );
 
-        $c_port{$iid} = $port;
-    }
+		$ip_broadcast{$ip} = $broadcast;
+	}
 
-    foreach my $iid ( keys %$lldp ) {
-        my $port = $lldp->{$iid};
-        next unless defined $port;
-        $c_port{$iid} = $port;
-    }
-    return \%c_port;
+	my $local_addrs = $nexus->_local_addr();
+	foreach my $addr (keys %$local_addrs) {
+		$ip_broadcast{$addr} = $addr unless exists $ip_broadcast{$addr};
+	}
+
+	return \%ip_broadcast;
 }
 
-sub c_id {
-    my $nexus   = shift;
-    my $partial = shift;
-
-    my $lldp = $nexus->lldp_id($partial)     || {};
-    my $cdp  = $nexus->SUPER::c_id($partial) || {};
-
-    my %c_id;
-    foreach my $iid ( keys %$cdp ) {
-        my $id = $cdp->{$iid};
-        next unless defined $id;
-	
-        $c_id{$iid} = $id;
-    }
-    
-    foreach my $iid ( keys %$lldp ) {
-	my $id = $lldp->{$iid};
-	next unless defined $id;
-	
-	$c_id{$iid} = $id;
-    }
-    return \%c_id;
-}
-
-sub c_platform {
-    my $nexus   = shift;
-    my $partial = shift;
-
-    my $lldp = $nexus->lldp_rem_sysdesc($partial)  || {};
-    my $cdp  = $nexus->SUPER::c_platform($partial) || {};
-
-    my %c_platform;
-    foreach my $iid ( keys %$cdp ) {
-        my $platform = $cdp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-
-    foreach my $iid ( keys %$lldp ) {
-        my $platform = $lldp->{$iid};
-        next unless defined $platform;
-
-        $c_platform{$iid} = $platform;
-    }
-    return \%c_platform;
+sub _local_addr {
+	my $nexus = shift;
+	my $listen_addr = $nexus->udpLocalAddress() || {};
+	my %local_addr;
+	foreach my $sock (keys %$listen_addr) {
+		my $addr = $listen_addr->{$sock};
+		next if ($addr =~ /^127\./); # localhost
+		next if ($addr eq '0.0.0.0'); # "any"
+		next if ($addr =~ /^(\d+)\./ and $1 ge 224); # Class D or E space: Multicast or Experimental
+		$local_addr{$addr} = '255.255.255.255'; # Fictional netmask
+	}
+	return \%local_addr;
 }
 
 1;
@@ -316,14 +237,14 @@ Eric Miller
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $nexus = new SNMP::Info(
-                        AutoSpecify => 1,
-                        Debug       => 1,
-                        # These arguments are passed directly to SNMP::Session
-                        DestHost    => 'myswitch',
-                        Community   => 'public',
-                        Version     => 2
-                        ) 
-    or die "Can't connect to DestHost.\n";
+						AutoSpecify => 1,
+						Debug       => 1,
+						# These arguments are passed directly to SNMP::Session
+						DestHost    => 'myswitch',
+						Community   => 'public',
+						Version     => 2
+						) 
+	or die "Can't connect to DestHost.\n";
 
  my $class      = $nexus->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
@@ -341,23 +262,7 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::CiscoStpExtensions
-
-=item SNMP::Info::LLDP
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =back
 
@@ -373,25 +278,9 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 =head1 GLOBALS
@@ -400,17 +289,13 @@ These are methods that return a scalar value from SNMP
 
 =over
 
-=item $nexus->vendor()
-
-Returns 'cisco'
-
 =item $nexus->os()
 
-Returns 'nx-os'
+Returns C<'nx-os'>
 
 =item $nexus->os_ver()
 
-Returns operating system version extracted fron C<sysDescr>.
+Returns operating system version extracted from C<sysDescr>.
 
 =item $nexus->serial()
 
@@ -420,145 +305,69 @@ Returns the serial number of the chassis from F<ENTITY-MIB>.
 
 Tries to reference $nexus->id() to F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
 
-Removes 'cevChassis' for readability.
+Removes C<'cevChassis'> for readability.
 
 =item $nexus->mac()
 
 C<dot1dBaseBridgeAddress>
 
-=item $nexus->cisco_comm_indexing()
+=back
 
-Returns 1.  Use vlan indexing.
+=head2 Overrides
+
+=head3 IP Address Table
+
+Each entry in this table is an IP address in use on this device.  Some 
+versions do not index the table with the IPv4 address in accordance with
+the MIB definition, these overrides correct that behavior.
+
+Also, the table is augmented with IP addresses in use by UDP sockets on the 
+device, as determined by checking F<RFC1213-MIB::udpLocalAddress>. Valid 
+addresses from this table (any IPv4 that is not localhost, 0.0.0.0, Class D
+(multicast) or Class E (experimental) are added as a /32 on interface ID 0.
+This is a workaround to determine possible VPC Keepalive IP addresses on the
+device, which are probably advertised by CDP/LLDP to neighbors.
+
+=over
+
+=item $nexus->ip_index()
+
+Maps the IP Table to the IID
+
+(C<ipAdEntIfIndex>)
+
+=item $nexus->ip_table()
+
+Maps the Table to the IP address
+
+(C<ipAdEntAddr>)
+
+=item $nexus->ip_netmask()
+
+Gives netmask setting for IP table entry.
+
+(C<ipAdEntNetMask>)
+
+=item $nexus->ip_broadcast()
+
+Gives broadcast address for IP table entry.
+
+(C<ipAdEntBcastAddr>)
 
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Topology information
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-Based upon the firmware version Cisco devices may support Link Layer Discover
-Protocol (LLDP) in addition to the Cisco-proprietary CDP.  These methods
-will query both and return the combination of all information.  As a result,
-there may be identical topology information returned from the two protocols
-causing duplicate entries.  It is the calling program's responsibility to
-identify any duplicate entries and remove duplicates if necessary.
-
-=over
-
-=item $nexus->hasCDP()
-
-Returns true if the device is running either CDP or LLDP.
-
-=item $nexus->c_if()
-
-Returns reference to hash.  Key: iid Value: local device port (interfaces)
-
-=item $nexus->c_ip()
-
-Returns reference to hash.  Key: iid Value: remote IPv4 address
-
-If multiple entries exist with the same local port, c_if(), with the same IPv4
-address, c_ip(), it may be a duplicate entry.
-
-If multiple entries exist with the same local port, c_if(), with different
-IPv4 addresses, c_ip(), there is either a non-CDP/LLDP device in between two
-or more devices or multiple devices which are not directly connected.  
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $nexus->c_port()
-
-Returns reference to hash. Key: iid Value: remote port (interfaces)
-
-=item $nexus->c_id()
-
-Returns reference to hash. Key: iid Value: string value used to identify the
-chassis component associated with the remote system.
-
-=item $nexus->c_platform()
-
-Returns reference to hash.  Key: iid Value: Remote Device Type
-
-=back
-
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
 =cut

Info/Layer3/PacketFront.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -175,7 +175,7 @@ These are methods that return scalar value from SNMP
 
 =item $pfront->vendor()
 
-Returns 'packetfront'.
+Returns C<'packetfront'>.
 
 =item $pfront->os()
 
@@ -187,7 +187,7 @@ Returns the software version extracted from C<sysDescr>.
 
 =item $pfront->serial()
 
-Returns the value of productSerialNo. 
+Returns the value of C<productSerialNo>. 
 
 =back
 

Info/Layer3/Passport.pm

@@ -1,7 +1,6 @@
 # SNMP::Info::Layer3::Passport
-# $Id$
 #
-# Copyright (c) 2008 Eric Miller
+# Copyright (c) 2012 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -30,6 +29,7 @@
 
 package SNMP::Info::Layer3::Passport;
 
+use warnings;
 use strict;
 use Exporter;
 use SNMP::Info::SONMP;
@@ -43,7 +43,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::RapidCity::MIBS,
@@ -80,12 +80,12 @@ sub model {
 
     return $id unless defined $model;
 
-    $model =~ s/^rcA//i;
+    $model =~ s/^rc(A)?//i;
     return $model;
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub os {
@@ -126,9 +126,9 @@ sub i_index {
 
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -145,7 +145,7 @@ sub i_index {
         }
     }
 
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_index = $passport->rc_cpu_ifindex($partial) || {};
         my $virt_ip = $passport->rc_virt_ip();
@@ -182,9 +182,9 @@ sub interfaces {
     my $vlan_id = {};
 
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -198,24 +198,24 @@ sub interfaces {
         my $index = $i_index->{$iid};
         next unless defined $index;
 
-        if ( ( $index == 1 ) and ( $model =~ /(86)/ ) ) {
+        if ( ( $index == 1 ) and ( $model =~ /^8[86]/ ) ) {
             $if{$index} = 'Cpu.Virtual';
         }
 
-        elsif ( ( $index == 192 ) and ( $model eq '8603' ) ) {
+        elsif ( ( $index == 192 ) and ( $model =~ /^8[86]03/ ) ) {
             $if{$index} = 'Cpu.3';
         }
 
-        elsif ( ( $index == 320 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $index == 320 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $if{$index} = 'Cpu.5';
         }
 
-        elsif ( ( $index == 384 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $index == 384 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $if{$index} = 'Cpu.6';
         }
 
-        elsif (( $index > 2000 and $model =~ /(86|83|81|16)/ )
-            or ( $index > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        elsif (( $index > 2000 and $model =~ /^8[8631]|16|VSP/ )
+            or ( $index > 256 and $model =~ /^1[012][05]0/ ) )
         {
 
             my $v_index = $reverse_vlan{$iid};
@@ -255,9 +255,9 @@ sub i_mac {
 
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -276,7 +276,7 @@ sub i_mac {
         }
     }
 
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_mac = $passport->rc_cpu_mac($partial) || {};
         my $virt_ip = $passport->rc_virt_ip()         || '0.0.0.0';
@@ -329,9 +329,9 @@ sub i_description {
 
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -365,9 +365,9 @@ sub i_name {
     my %reverse_vlan;
 
     if (!defined $partial
-        or (defined $model
-            and (  ( $partial > 2000 and $model =~ /(86|83|81|16)/ )
-                or ( $partial > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        || (defined $model
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -379,31 +379,31 @@ sub i_name {
     my %i_name;
     foreach my $iid ( keys %$i_index ) {
 
-        if ( ( $iid == 1 ) and ( $model =~ /(86)/ ) ) {
+        if ( ( $iid == 1 ) and ( $model =~ /^8[86]/ ) ) {
             $i_name{$iid} = 'CPU Virtual Management IP';
         }
 
-        elsif ( ( $iid == 192 ) and ( $model eq '8603' ) ) {
+        elsif ( ( $iid == 192 ) and ( $model =~ /^8[86]03/ ) ) {
             $i_name{$iid} = 'CPU 3 Ethernet Port';
         }
 
-        elsif ( ( $iid == 320 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $iid == 320 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $i_name{$iid} = 'CPU 5 Ethernet Port';
         }
 
-        elsif ( ( $iid == 384 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $iid == 384 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $i_name{$iid} = 'CPU 6 Ethernet Port';
         }
 
         elsif (
-            ( $iid > 2000 and defined $model and $model =~ /(86|83|81|16)/ )
+            ( $iid > 2000 and defined $model and $model =~ /^8[8631]|16|VSP/ )
             or (    $iid > 256
                 and defined $model
-                and $model =~ /(105|11[05]0|12[05])/ )
+                and $model =~ /^1[012][05]0/ )
             )
         {
-            my $vlan_index = $reverse_vlan{$iid};
-            my $vlan_name  = $v_name->{$vlan_index};
+            my $vlan_idx = $reverse_vlan{$iid};
+            my $vlan_name  = $v_name->{$vlan_idx};
             next unless defined $vlan_name;
 
             $i_name{$iid} = $vlan_name;
@@ -433,12 +433,16 @@ sub ip_index {
     foreach my $ip ( keys %$ip_index ) {
         my $iid = $ip_index->{$ip};
         next unless defined $iid;
+        # Skip VSP default CPU addresses
+        next if ($ip =~ /^192\.168\.1\.1/);
+        # Skip default CPU addresses
+        next if ($ip =~ /^192\.168\.168\.16[89]/);
 
         $ip_index{$ip} = $iid;
     }
 
     # Only 8600 has CPU and Virtual Management IP
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_ip = $passport->rc_cpu_ip($partial) || {};
         my $virt_ip = $passport->rc_virt_ip($partial);
@@ -447,6 +451,8 @@ sub ip_index {
         foreach my $cid ( keys %$cpu_ip ) {
             my $c_ip = $cpu_ip->{$cid};
             next unless defined $c_ip;
+            # Skip default CPU addresses
+            next if ($c_ip =~ /192\.168\.168\.16[89]/);
 
             $ip_index{$c_ip} = $cid;
         }
@@ -467,6 +473,10 @@ sub ip_netmask {
 
     my %ip_index;
     foreach my $iid ( keys %$ip_mask ) {
+        # Skip VSP default CPU addresses
+        next if ($iid =~ /^192\.168\.1\./);
+        # Skip default CPU addresses
+        next if ($iid =~ /^192\.168\.168\.16[89]/);
         my $mask = $ip_mask->{$iid};
         next unless defined $mask;
 
@@ -474,7 +484,7 @@ sub ip_netmask {
     }
 
     # Only 8600 has CPU and Virtual Management IP
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_ip    = $passport->rc_cpu_ip($partial)    || {};
         my $cpu_mask  = $passport->rc_cpu_mask($partial)  || {};
@@ -485,6 +495,8 @@ sub ip_netmask {
         foreach my $iid ( keys %$cpu_mask ) {
             my $c_ip = $cpu_ip->{$iid};
             next unless defined $c_ip;
+            # Skip default CPU addresses
+            next if ($c_ip =~ /192\.168\.168\.16[89]/);
             my $c_mask = $cpu_mask->{$iid};
             next unless defined $c_mask;
 
@@ -510,7 +522,7 @@ sub root_ip {
     my $sonmp_topo_ip   = $passport->sonmp_topo_ip();
 
     # Only 8600 and 1600 have CLIP or Management Virtual IP
-    if ( defined $model and $model =~ /(86|16)/ ) {
+    if ( defined $model and $model =~ /^8[86]|16|VSP/ ) {
 
         # Return CLIP (CircuitLess IP)
         foreach my $iid ( keys %$rc_ip_type ) {
@@ -560,7 +572,7 @@ sub index_factor {
 
     # Older Accelar models use base 16 instead of 64
     $index_factor = 16
-        if ( defined $model and $model =~ /(105|11[05]0|12[05])/ );
+        if ( defined $model and $model =~ /^1[012][05]0/ );
     return $index_factor;
 }
 
@@ -583,9 +595,86 @@ sub bp_index {
     foreach my $iid ( keys %$if_index ) {
         $bp_index{$iid} = $iid;
     }
+
+    # If we have MLT's map them to the designated port
+    my $trunks = $passport->rc_mlt_index;
+    my $dps    = $passport->rc_mlt_dp || {};
+
+    if ( ref {} eq ref $trunks and scalar keys %$trunks ) {
+        foreach my $m ( keys %$trunks ) {
+            my $m_idx = $trunks->{$m};
+            next unless $m_idx;
+            my $i_idx = $dps->{$m} ? $dps->{$m} : $m_idx;
+            $bp_index{$m_idx} = $i_idx;
+        }
+    }
+
     return \%bp_index;
 }
 
+# We have devices which support BRIDGE-MIB, Q-BRIDGE-MIB, and RAPID-CITY
+# exclusively.  Use standards-based first and fall back to RAPID-CITY.
+sub fw_mac {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_mac($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    my $qb_fw_port = $passport->rcBridgeTpFdbPort($partial);
+    my $qb_fw_mac  = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _rc_fdbtable_index($idx);
+        $qb_fw_mac->{$idx} = $mac;
+    }
+    return $qb_fw_mac;
+}
+
+sub fw_port {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_port($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $passport->rcBridgeTpFdbPort($partial);
+}
+
+sub fw_status {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_status($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+    
+    return $passport->rcBridgeTpFdbStatus($partial);
+}
+
+sub qb_fw_vlan {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::qb_fw_vlan($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    my $qb_fw_port = $passport->rcBridgeTpFdbPort($partial);
+    my $qb_fw_vlan = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _rc_fdbtable_index($idx);
+        $qb_fw_vlan->{$idx} = $fdb_id;
+    }
+    return $qb_fw_vlan;
+}
+
+# break up the rcBridgeTpFdbEntry INDEX into FDB ID and MAC Address.
+sub _rc_fdbtable_index {
+    my $idx    = shift;
+    my @values = split( /\./, $idx );
+    my $fdb_id = shift(@values);
+    return ( $fdb_id, join( ':', map { sprintf "%02x", $_ } @values ) );
+}
+
+
 # Pseudo ENTITY-MIB methods
 
 sub e_index {
@@ -613,7 +702,7 @@ sub e_index {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_type() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -683,7 +772,7 @@ sub e_descr {
 
     my $model = $passport->model();
     my $rc_ps = $passport->rc_ps_detail() || {};
-    my $rc_ch = $passport->rcChasType();
+    my $rc_ch = $passport->chassis() || '';
     $rc_ch =~ s/a//;
 
     my %rc_e_descr;
@@ -701,7 +790,7 @@ sub e_descr {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_type() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -752,7 +841,7 @@ sub e_type {
 
     my $model = $passport->model();
     my $rc_ps = $passport->rc_ps_type() || {};
-    my $rc_ch = $passport->rcChasType();
+    my $rc_ch = $passport->chassis();
 
     my %rc_e_type;
 
@@ -769,7 +858,7 @@ sub e_type {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_type() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -842,7 +931,7 @@ sub e_name {
             $rc_e_name{$iid} = "Card $slot, MDA $mod";
         }
         elsif ( defined $model
-            and $model =~ /(105|11[05]0|12[05])/
+            and $model =~ /^1[012][05]0/
             and $iid   =~ /1$/ )
         {
             $rc_e_name{$iid} = "Card $slot";
@@ -878,7 +967,7 @@ sub e_hwver {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_rev() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -927,7 +1016,7 @@ sub e_vendor {
 
     my %rc_e_vendor;
     foreach my $iid ( keys %$rc_e_idx ) {
-        $rc_e_vendor{$iid} = 'nortel';
+        $rc_e_vendor{$iid} = 'avaya';
     }
     return \%rc_e_vendor;
 }
@@ -953,7 +1042,7 @@ sub e_serial {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_serial() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -1051,8 +1140,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Passport - SNMP Interface to modular Nortel Ethernet Routing
-Switches (formerly Passport / Accelar)
+SNMP::Info::Layer3::Passport - SNMP Interface to modular Avaya
+Ethernet Routing Switch 8000 Series and VSP 9000 Series switches.
 
 =head1 AUTHOR
 
@@ -1075,10 +1164,10 @@ Eric Miller
 
 =head1 DESCRIPTION
 
-Abstraction subclass for modular Nortel Ethernet Routing Switches (formerly
-Passport and Accelar Series Switches).
+Abstraction subclass for modular Avaya Ethernet Routing Switch 8000 Series
+(formerly Nortel/Bay Passport/Accelar) and VSP 9000 Series switches.
 
-These devices have some of the same characteristics as the stackable Nortel 
+These devices have some of the same characteristics as the stackable Avaya 
 Ethernet Switches (Baystack).  For example, extended interface information is 
 gleaned from F<RAPID-CITY>.
 
@@ -1126,7 +1215,7 @@ F<RAPID-CITY-MIB> and then parses out C<rcA>.
 
 =item $passport->vendor()
 
-Returns 'nortel'
+Returns 'avaya'
 
 =item $passport->os()
 
@@ -1240,6 +1329,40 @@ problems with F<BRIDGE-MIB>
 
 =back
 
+=head2 Forwarding Table
+
+These methods utilize, in order; F<Q-BRIDGE-MIB>, F<BRIDGE-MIB>, and
+F<RAPID-CITY> to obtain the forwarding table information.
+
+=over 
+
+=item $passport->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses
+
+(C<dot1qTpFdbAddress>), (C<dot1dTpFdbAddress>), (C<rcBridgeTpFdbAddress>)
+
+=item $passport->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+(C<dot1qTpFdbPort>), (C<dot1dTpFdbPort>), (C<rcBridgeTpFdbPort>)
+
+=item $passport->fw_status()
+
+Returns reference to hash of forwarding table entries status
+
+(C<dot1qTpFdbStatus>), (C<dot1dTpFdbStatus>), (C<rcBridgeTpFdbStatus>)
+
+=item $passport->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
+(C<dot1qFdbId>), (C<rcBridgeTpFdbVlanId>)
+
+=back
+
 =head2 Pseudo F<ENTITY-MIB> information
 
 These devices do not support F<ENTITY-MIB>.  These methods emulate Physical
@@ -1273,7 +1396,7 @@ Returns reference to hash.  Key: IID, Value: Hardware version.
 
 =item $passport->e_vendor()
 
-Returns reference to hash.  Key: IID, Value: nortel.
+Returns reference to hash.  Key: IID, Value: avaya.
 
 =item $passport->e_serial()
 

Info/Layer3/Pf.pm

@@ -41,7 +41,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -118,42 +118,6 @@ sub os_ver {
     return $os_ver;
 }
 
-# Use LLDP
-sub hasCDP {
-    my $pf = shift;
-    return $pf->hasLLDP();
-}
-
-sub c_ip {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_ip($partial);
-}
-
-sub c_if {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_if($partial);
-}
-
-sub c_port {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_port($partial);
-}
-
-sub c_id {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_id($partial);
-}
-
-sub c_platform {
-    my $pf  = shift;
-    my $partial = shift;
-    return $pf->lldp_rem_sysdesc($partial);
-}
-
 1;
 __END__
 
@@ -230,10 +194,6 @@ These are methods that return scalar values from SNMP
 
     Returns 'FreeBSD'
 
-=item $pf->hasCDP()
-
-    Returns whether LLDP is enabled.
-
 =item $pf->model()
 
 Grabs the os version from C<sysDescr>
@@ -259,30 +219,6 @@ See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=over
-
-=item $pf->c_id()
-
-Returns LLDP information.
-
-=item $pf->c_if()
-
-Returns LLDP information.
-
-=item $pf->c_ip()
-
-Returns LLDP information.
-
-=item $pf->c_platform()
-
-Returns LLDP information.
-
-=item $pf->c_port()
-
-Returns LLDP information.
-
-=back
-
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/Pica8.pm

@@ -0,0 +1,191 @@
+# SNMP::Info::Layer3::Pica8
+#
+# Copyright (c) 2013 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Pica8;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Pica8::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Pica8::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.21_001';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    return 'Pica8';
+}
+
+sub os {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /(\S+)\s+Platform Software/i );
+    return;
+}
+
+sub os_ver {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /Software version ([\d\.]+)/i );
+    return;
+}
+
+sub model {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /Hardware model (P-\d{4})/i );
+    return;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Pica8 - SNMP Interface to L3 Devices, Pica8
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $pica8 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $pica8->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Pica8 devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<PICA-PRIVATE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $pica8->vendor()
+
+Returns 'Pica8'
+
+=item $pica8->model()
+
+Returns the model name extracted from C<sysDescr>.
+
+=item $pica8->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $pica8->os_ver()
+
+Returns the OS version extracted from C<sysDescr>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=cut

Info/Layer3/SonicWALL.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '2.11';
+$VERSION = '3.21_001';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,