release 3.16

Add CiscoPortSecurity, CiscoStpExtensions, CiscoAgg to L2::Cisco
Remove CiscoQOS and CiscoImage from L2::Cisco

.gitignore

@@ -0,0 +1,2 @@
+*.db
+SNMP

ChangeLog

@@ -1,6 +1,223 @@
 SNMP::Info - Friendly OO-style interface to Network devices using SNMP.
 
-version 3.00
+version 3.16 (2014-06-23)
+
+   [ENHANCEMENTS]
+
+    * Add method resolution discovery in SNMP::Info::MRO helper module
+    * Consolidate CiscoImage class into CiscoStats class
+    * Clean up inheritance for Cisco classes.  With this change
+      all applicable classes now inherit CiscoAgg, CiscoStpExtensions,
+      CiscoPortSecurity, CiscoPower, and LLDP classes.
+    * Remove inheritance of classes the devices do not support in L3::FWSM
+      andL3::CiscoASA
+
+   [BUG FIXES]
+
+    * Use CiscoVTP methods to get interface VLAN in L3::Cisco rather than
+      solely relying on the interface description. 
+
+version 3.15 (2014-07-10)
+
+   [NEW FEATURES]
+
+    * Offline mode and Cache export/priming.
+
+   [ENHANCEMENTS]
+
+    * Return serial number for Cisco 3850 from entPhysicalSerialNum
+
+   [BUG FIXES]
+
+    * Cisco SB serial number probably did not work
+
+version 3.14 (2014-06-07)
+
+   [ENHANCEMENTS]
+
+    * Improvements to Mikrotik module (Alex Z)
+    * Don't unshift length from broken lldpRemManAddrTable implementations (G. Shtern)
+    * 802.3ad LAG support in Layer3::H3C
+    * Add LLDP capabilities to Layer2::HPVC class
+
+   [BUG FIXES]
+
+    * Return correct VLAN info with qb_fw_table() on Layer2::HP
+
+version 3.13 (2014-03-27)
+
+   [ENHANCEMENTS]
+
+    * Cisco PAgP support added to LAG method
+    * HP ProCurve LAG support by inheriting Info::Aggregate class
+
+version 3.12 (2014-02-10)
+
+   [ENHANCEMENTS]
+
+    * Modify L3::Passport to obtain forwarding table information from
+      RAPID-CITY if information is not available in either Q-BRIDGE-MIB or
+      BRIDGE-MIB.  Needed for VSP 9000 prior to version 4.x (Tobias Gerlach)
+
+   [BUG FIXES]
+
+    * [#52] NETSCREEN-IP-ARP-MIB considered harmful
+    * Foundry/Brocade aggreate port master ifIndex resolved properly
+
+version 3.11 (2014-01-26)
+
+   [NEW FEATURES]
+
+    * [#31] port-channel (aggregate) support.  Aggregate support added in new
+      agg_ports() method.  Inital support added for Arista (ifStack),
+      Avaya (MLT), Brocade (MST), and Cisco (802.3ad).
+
+   [ENHANCEMENTS]
+
+    * Use Q-BRIDGE-MIB as default with fallback to BRIDGE-MIB across all
+      classes for the fw_mac, fw_port, and fw_status methods
+    * Additional support for Avaya 8800 series in L3::Passport
+
+   [BUG FIXES]
+
+    * Modify cdp_cap() to handle devices which return space delimited strings
+      for cdpCacheCapabilities rather than hex strings
+    * [#51] Netdisco shows broken topology for devices with no alias entry
+      for primary IP - Collect nsIfMngIp when getting IP interfaces in
+      L3::Netscreen
+    * Fix Extreme XOS i_vlan_membership - Revert [28bbe0], fix bug with
+      untagged being added to @ret twice (Robert Kerr)
+    * Skip default CPU management addresses on VSP and 8800/8600 series in
+      L3::Passport to prevent erroneous duplicate addresses
+
+version 3.10 (2013-12-16)
+
+   [BUG FIXES]
+
+    * Data values of zero are now sent to munge method instead of skipped
+
+version 3.09 (2013-12-15)
+
+   [NEW FEATURES]
+
+    * [#45] IBM (Blade Network Technologies) Rackswitch support in new class
+      L3::IBMGbTor
+    * [] set_i_untagged combines both set_i_vlan and set_i_pvid in one method
+    * [#41] Riverbed Steelhead support added in new class L3::Steelhead
+    * New c_cap(), cdp_cap(), and lldp_cap() methods which return a hash of
+      arrays with each array containing the system capabilities reported as
+      supported by the remote system via CDP or LLDP.
+
+   [ENHANCEMENTS]
+
+    * Remove "Switch" from model name in L3::Foundry
+    * [#49] IOS-XR support, add identification of IOS XR and version in
+      CiscoStats
+    * Aruba POE Support
+    * Aruba utilizes Q-BRIDGE-MIB when available for VLAN information to
+      better support wired switches
+    * Add lldp_platform() method which uses lldp_rem_sysdesc() or
+      lldp_rem_sysname() to provide a clue to type of remote LLDP capable
+      device.
+    * [RT#78232] Extend cdpCacheCapabilities to show more CDP bits
+
+   [BUG FIXES]
+
+    * Modify _xos_i_vlan_membership() in L3::Extreme to only include tagged
+      ports
+    * When determining the BSSID in Airespace there is only one hexadecimal
+      digit available so skip if outside the range of 1-16, 17 is reserved
+      for 3rd party AP's
+    * Don't assume entity index 1 is the chassis and has serial in Layer3
+    * Capture serial number on newer Aruba devices
+    * munge_bits() correctly unpacks BITS
+    * Fix for single instance table leafs in test_class_mocked.pl
+    * Fix power module indexing
+
+version 3.08 (2013-10-22)
+
+   [ENHANCEMENTS]
+
+    * Rewrite of L3::Aruba, now supports pseudo ENTITY-MIB methods to gather
+      module information, more interface information for APs, more
+      wireless information to include client stats, and arpnip information
+      from wireless clients.  WARNING: AP device interfaces are now based on
+      AP MAC and radio versus BSSID to align with other wireless classes.
+    * [#64] Add i_speed_admin() to L2::2900 (psychiatric)
+    * [#66] Support for VSS via CISCO-VIRTUAL-SWITCH-MIB in L3::6500
+    * [#67] Add the possibility to set speed for Layer3::C4000 (psychiatric)
+    * [#69] set speed and duplex on Cisco VSS system (psychiatric)
+    * munge_null() now removes all non-printable control characters
+    * Support Aironet standalone access points (Layer2::Aironet) running IOS15
+    * lldp_port() returns port ID instead of port description if the port ID
+      subtype is "interface name".  This improves the ability to correlate
+      ports by name when a port description is also set.
+    * Add docs note about make_snmpdata.pl under EXTENDING SNMP::Info
+    * [#46] Brocade (Foundry) Module Support
+    * Brocade (Foundry) POE Support
+    * Support peth_port_power() power supplied by PoE ports in L2::Baystack
+    * Update test_class.pl utility to allow ignore of snmp.conf and test
+      summarize more standard class methods
+    * On EOS, the LLDP port ID is a dot1d port
+    * Use LLDP in Layer3::Aruba, for switches
+    * Clean up more model names in L2::Baystack
+
+   [BUG FIXES]
+
+    * [#68] Fix device_port entries for switches with non-unique
+      ifDesc (Nic Bernstein)
+    * Don't try to munge undef values
+    * [#49] Perl 5.18 UNIVERSAL::can change could cause infinite loop 
+    * Silence warning from uninitialized variable in L3::Passport e_descr()
+
+version 3.07 (2013-10-01)
+
+   [ENHANCEMENTS]
+
+    * Support for Pica8 switches in L3::Pica8
+    * Factor out cache/munge code from global/attr methods
+
+   [BUG FIXES]
+
+   * [#48] Switch duplicate J9624A for J9626A in Layer2/HP (R. Kerr)
+   * Correct device serial number reporting for Nexus devices
+   * Override ipAddrTable methods in L3::Nexus as some versions do not
+     index the table with the IPv4 address in accordance with the MIB
+     definition.
+
+version 3.05 (2013-08-16)
+
+   [ENHANCEMENTS]
+
+    * [#47] Add model info on HP 2530 and HP 2920 series
+    * Add support for Cisco Small Business series
+      Layer2/CiscoSB class
+    * Add proper LLDP support to Netgear.pm
+    * Change $netgear->interfaces() to use ifName rather than ifDescr
+      as the former is unique per interface while the latter is not.  
+      If ifName is not present, concatenate ifDescr and ifIndex
+      to achieve a unique value.
+    * Properly report hardware version, Serial No. and OS Version for
+      Netgear.
+    
+
+version 3.03 (2013-07-11)
+
+    [BUG FIXES]
+
+    * Add missing =back to POD (A. Hartmaier)
+
+version 3.02 (2013-07-08)
+
+    [ENHANCEMENTS]
+
+    * Properly pull os_ver from Netgear GS series switches.
+    * Support Alcatel devices with layer3 features.
+    * Identify Cisco Aironet 1140 APs as Layer2::Aironet
+    * LAN switch support added to Layer3::Aruba class
+    * [RT#86725] - Identify Cisco Catalyst 3850 as Layer3::C6500 (C. Causer)
+
+version 3.01 (2013-04-13)
 
     [API Changes]
 
@@ -24,6 +241,7 @@ version 3.00
     * [3033731] - Alcatel-Lucent OmniSwich AMAP Support in new AMAP class
     * [3598896] - Lantronix device support (J R Binks)
     * [3598337] - Lantronix SLC support
+    * Support for Cisco ASA in L3::CiscoASA (Kraus/Hartmaier/Bernstein)
     * Support for Avaya VSP 9000 series in L3::Passport
     * Support for Avaya VSP 7000 series in L2::Baystack
     * Support Avaya (Trapeze) Wireless Controllers in new class L2::NWSS2300

DeviceMatrix.txt

@@ -101,8 +101,11 @@ portmac: yes
 duplex: no
 class: Layer3::Aruba
 
-device-family: Aruba Wireless Controllers
+device-family: Aruba Wireless Controllers and LAN switches
 note: Uses proprietary MIBs to provide MAC to port mapping.  APs appear as switch ports.
+note: On LAN switches, hosts connected to "trusted" switch ports in "access" mode may be mapped to incorrect ports.
+
+device: 3500
 
 device: 5000
 
@@ -381,6 +384,10 @@ class: Layer3::Altiga
 device: VPN3000
 note: The Cisco 3000 device can return duplicate interface names, while Netdisco expects unique interface names.  To ensure unique device names I append numbers only when an interface name would not be unique without one. Interfaces with unique names keep their ifDescr name.
 
+device: ASA
+note: The Cisco ASA is the successor of the PIX which was bought from Altiga Networks.
+class: Layer3::CiscoASA
+
 device-family: 1000
 duplex: no
 ver: 1
@@ -650,6 +657,12 @@ note: !Arpnip only available for 4.x software releases.
 class: Layer3::CiscoFWSM
 arpnip: yes
 
+device: Sx300, Sx500 series
+device-family: Small Business switches
+class: Layer2::CiscoSB
+arpnip: no
+macsuck: yes
+
 #
 # Citrix
 #

Info.pm

@@ -24,15 +24,15 @@ use vars
     qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG %SPEED_MAP
     $NOSUCH $BIGINT $REPEATERS/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 =head1 NAME
 
-SNMP::Info - Object Oriented Perl5 Interface to Network devices and MIBs through SNMP. 
+SNMP::Info - OO Interface to Network devices and MIBs through SNMP
 
 =head1 VERSION
 
-SNMP::Info - Version 3.00_003
+SNMP::Info - Version 3.16
 
 =head1 AUTHOR
 
@@ -108,7 +108,7 @@ See L<http://netdisco.org/doc/DeviceMatrix.html> or L<DeviceMatrix.txt> for more
 =head1 SUPPORT
 
 Please direct all support, help, and bug requests to the snmp-info-users
-Mailing List at <http://lists.sourceforge.net/lists/listinfo/snmp-info-users>.
+Mailing List at L<http://lists.sourceforge.net/lists/listinfo/snmp-info-users>.
 
 =head1 DESCRIPTION 
 
@@ -235,6 +235,12 @@ Requires the F<ADSL-LINE-MIB>, down loadable from Cisco.
 
 See documentation in L<SNMP::Info::AdslLine> for details.
 
+=item SNMP::Info::Aggregate
+
+SNMP Interface to F<IF-MIB> C<ifStackTable> Aggregated Links
+
+See documentation in L<SNMP::Info::Aggregate> for details.
+
 =item SNMP::Info::Airespace
 
 F<AIRESPACE-WIRELESS-MIB> and F<AIRESPACE-SWITCHING-MIB>.  Inherited by
@@ -256,6 +262,12 @@ support.
 
 See documentation in L<SNMP::Info::Bridge> for details.
 
+=item SNMP::Info::CiscoAgg
+
+SNMP Interface to Cisco Aggregated Links
+
+See documentation in L<SNMP::Info::CiscoAgg> for details.
+
 =item SNMP::Info::CDP
 
 F<CISCO-CDP-MIB>.  Cisco Discovery Protocol (CDP) Support.  Inherited by
@@ -270,12 +282,6 @@ These OIDs facilitate the writing of configuration files.
 
 See documentation in L<SNMP::Info::CiscoConfig> for details.
 
-=item SNMP::Info::CiscoImage
-
-F<CISCO-IMAGE-MIB>. A collection of OIDs providing IOS image characteristics.
-
-See documentation in L<SNMP::Info::CiscoImage> for details.
-
 =item SNMP::Info::CiscoPortSecurity
 
 F<CISCO-PORT-SECURITY-MIB> and F<CISCO-PAE-MIB>.
@@ -369,6 +375,12 @@ standards based 802.11 wireless devices.
 
 See documentation in L<SNMP::Info::IEEE802dot11> for details.
 
+=item SNMP::Info::IEEE802dot3ad
+
+SNMP Interface to IEEE Aggregated Links.  F<IEEE8023-LAG-MIB>
+
+See documentation in L<SNMP::Info::IEEE802dot3ad> for details.
+
 =item SNMP::Info::LLDP
 
 F<LLDP-MIB>, F<LLDP-EXT-DOT1-MIB>, and F<LLDP-EXT-DOT3-MIB>.  Link Layer
@@ -535,11 +547,19 @@ See documentation in L<SNMP::Info::Layer2::Centillion> for details.
 
 =item SNMP::Info::Layer2::Cisco
 
-Generic Cisco subclass for layer2 devices that are not yet supported
-in more specific subclasses.
+Generic Cisco subclass for layer 2 devices that are not yet supported
+in more specific subclassesand the base layer 2 Cisco class for
+other device specific layer 2 Cisco classes.
 
 See documentation in L<SNMP::Info::Layer2::Cisco> for details.
 
+=item SNMP::Info::Layer2::CiscoSB
+
+Subclass for Cisco's "Small Business" product line, acquired from 
+Linksys.  This currently comprises the Sx300/500 line of switches.
+
+See documentation in L<SNMP::Info::Layer2::CiscoSB> for details.
+
 =item SNMP::Info::Layer2::HP
 
 Subclass for more recent HP Procurve Switches
@@ -686,16 +706,28 @@ See documentation in L<SNMP::Info::Layer3::C6500> for details.
 
 =item SNMP::Info::Layer3::Cisco
 
-This is a simple wrapper around Layer3 for IOS devices.  It adds on CiscoVTP.
+This is a simple wrapper around layer 3 for IOS devices and the base layer 3
+Cisco class for other device specific layer 3 Cisco classes.
 
 See documentation in L<SNMP::Info::Layer3::Cisco> for details.
 
+=item SNMP::Info::Layer3::CiscoASA
+
+Subclass for Cisco Adaptive Security Appliances.
+
+See documentation in L<SNMP::Info::Layer3::CiscoASA> for details.
+
 =item SNMP::Info::Layer3::CiscoFWSM
 
 Subclass for Cisco Firewall Services Modules.
 
 See documentation in L<SNMP::Info::Layer3::CiscoFWSM> for details.
 
+=item SNMP::Info::Layer3::CiscoSwitch
+
+Base class for L3 Cisco switches.  See documentation in
+L<SNMP::Info::Layer3::CiscoSwitch> for details.
+
 =item SNMP::Info::Layer3::Contivity
 
 Subclass for Avaya/Nortel Contivity/VPN Routers.  
@@ -753,6 +785,13 @@ Original Equipment Manufacturer (OEM) such as the HP ProCurve 9300 and 6300 seri
 
 See documentation in L<SNMP::Info::Layer3::HP9300> for details.
 
+=item SNMP::Info::Layer3::IBMGbTor
+
+SNMP Interface to IBM Rackswitch (formerly Blade Network Technologies)
+network devices.
+
+See documentation in L<SNMP::Info::Layer3::IBMGbTor> for details.
+
 =item SNMP::Info::Layer3::Juniper
 
 Subclass for Juniper devices
@@ -820,11 +859,22 @@ Subclass for FreeBSD-Based Firewalls using Pf /Pf Sense
 
 See documentation in L<SNMP::Info::Layer3::Pf> for details.
 
+=item SNMP::Info::Layer3::Pica8
+
+Subclass for Pica8 devices.
+
+See documentation in L<SNMP::Info::Layer3::Pica8> for details.
+
 =item SNMP::Info::Layer3::SonicWALL
 
 Subclass for generic SonicWALL devices. See documentation in
 L<SNMP::Info::Layer3::SonicWALL> for details.
 
+=item SNMP::Info::Layer3::Steelhead
+
+Subclass for  Riverbed Steelhead WAN optimization appliances. See
+documentation in L<SNMP::Info::Layer3::Steelhead> for details.
+
 =item SNMP::Info::Layer3::Sun
 
 Subclass for Generic Sun Routers running SunOS.
@@ -1004,6 +1054,20 @@ SNMP::Session object to use instead of connecting on own.
 
 (default creates session automatically)
 
+=item Offline
+
+Causes SNMP::Info to avoid network activity and return data only from its
+cache. If you ask for something not in the cache, an error is thrown.  See
+also the C<cache()> and C<offline()> methods.
+
+(default 0, which means "online")
+
+=item Cache
+
+Pass in a HashRef to prime the cache of retrieved data. Useful for creating an
+instance in C<Offline> mode from a previously dumped cache. See also the
+C<cache()> method to retrieve a cache after running actial queries.
+
 =item OTHER
 
 All other arguments are passed to SNMP::Session.
@@ -1093,6 +1157,16 @@ sub new {
         delete $sess_args{IgnoreNetSNMPConf};
     }
 
+    if ( defined $args{Offline} ) {
+        $new_obj->{Offline} = $args{Offline} || 0;
+        delete $sess_args{Offline};
+    }
+
+    if ( defined $args{Cache} and ref {} eq ref $args{Cache} ) {
+        $new_obj->{$_} = $args{Cache}->{$_} for keys %{$args{Cache}};
+        delete $sess_args{Cache};
+    }
+
     my $sess = undef;
     if ( defined $args{Session} ) {
         $sess = $args{Session};
@@ -1217,6 +1291,9 @@ data from a method.
 Run $info->clear_cache() to clear the cache to allow reload of both globals
 and table methods.
 
+The cache can be retreved or set using the $info->cache() method. This works
+together with the C<Offline> option.
+
 =head2 Object Scalar Methods
 
 These are for package related data, not directly supplied
@@ -1265,6 +1342,50 @@ sub debug {
     return $self->{debug};
 }
 
+=item $info->offline([1|0])
+
+Returns if offline mode is currently turned on for this object.
+
+Optionally sets the Offline parameter.
+
+=cut
+
+sub offline {
+    my $self = shift;
+    my $ol   = shift;
+
+    if ( defined $ol ) {
+        $self->{Offline} = $ol;
+    }
+    return $self->{Offline};
+}
+
+=item $info->cache([new_cache])
+
+Returns a HashRef of all cached data in this object. There will be a C<store>
+key for table data and then one key for each leaf.
+
+Optionally sets the cache parameters if passed a HashRef.
+
+=cut
+
+sub cache {
+    my $self = shift;
+    my $data = shift;
+
+    if ( defined $data and ref {} eq ref $data ) {
+        $self->{$_} = $data->{$_} for keys %$data;
+    }
+
+    my $cache = { store => $self->{store} };
+    foreach my $key ( keys %$self ) {
+        next unless defined $key;
+        next unless $key =~ /^_/;
+        $cache->{$key} = $self->{$key};
+    }
+    return $cache;
+}
+
 =item $info->bulkwalk([1|0])
 
 Returns if bulkwalk is currently turned on for this object.
@@ -1342,6 +1463,7 @@ sub device_type {
     }
 
     my $id = $info->id() || 'undef';
+    my $soid = $id;
 
     # Hash for generic fallback to a device class if unable to determine using
     # the sysDescr regex.
@@ -1376,8 +1498,11 @@ sub device_type {
         12325 => 'SNMP::Info::Layer3::Pf',
         14525 => 'SNMP::Info::Layer2::Trapeze',
         14988 => 'SNMP::Info::Layer3::Mikrotik',
+        17163 => 'SNMP::Info::Layer3::Steelhead',
         25506 => 'SNMP::Info::Layer3::H3C',
+        26543 => 'SNMP::Info::Layer3::IBMGbTor',
         30065 => 'SNMP::Info::Layer3::Arista',
+        35098 => 'SNMP::Info::Layer3::Pica8',
     );
 
     my %l2sysoidmap = (
@@ -1396,10 +1521,13 @@ sub device_type {
         3375  => 'SNMP::Info::Layer3::F5',
         4526  => 'SNMP::Info::Layer2::Netgear',
         5624  => 'SNMP::Info::Layer3::Enterasys',
+        6486  => 'SNMP::Info::Layer3::AlcatelLucent',
         11898 => 'SNMP::Info::Layer2::Orinoco',
         14179 => 'SNMP::Info::Layer2::Airespace',
         14525 => 'SNMP::Info::Layer2::Trapeze',
         14823 => 'SNMP::Info::Layer3::Aruba',
+        17163 => 'SNMP::Info::Layer3::Steelhead',
+        26543 => 'SNMP::Info::Layer3::IBMGbTor',
     );
 
     my %l7sysoidmap = (
@@ -1437,10 +1565,10 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer3::Aironet'
             if ( $desc =~ /Aironet/ and $desc =~ /\D(AP4800)\D/ );
 
-	# Cat6k with older SUPs (hybrid CatOS/IOS?)
+        # Cat6k with older SUPs (hybrid CatOS/IOS?)
         $objtype = 'SNMP::Info::Layer3::C6500' if $desc =~ /(c6sup2|c6sup1)/;
 
-	# Cat6k with Sup720, Sup720 or Sup2T (and Sup2 running native IOS?)
+        # Cat6k with Sup720, Sup720 or Sup2T (and Sup2 running native IOS?)
         $objtype = 'SNMP::Info::Layer3::C6500'
             if $desc =~ /(s72033_rp|s3223_rp|s32p3_rp|s222_rp|s2t54)/;
 
@@ -1448,6 +1576,10 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer3::C6500'
             if ( $desc =~ /cisco/i and $desc =~ /3750/ );
 
+        # IOS 15.x on Catalyst 3850
+        $objtype = 'SNMP::Info::Layer3::C6500'
+            if ( $desc =~ /cisco/i and $desc =~ /CAT3K/ );
+
         #   Cisco 2970
         $objtype = 'SNMP::Info::Layer3::C6500'
             if ( $desc =~ /(C2970|C2960)/ );
@@ -1491,6 +1623,11 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer2::Allied'
             if ( $desc =~ /Allied.*AT-80\d{2}\S*/i );
 
+        # Cisco ASA, newer versions which report layer 3 functionality
+        # version >= 8.2 are known to do this
+        $objtype = 'SNMP::Info::Layer3::CiscoASA'
+            if ( $desc =~ /Cisco Adaptive Security Appliance/i );
+
         # Cisco FWSM
         $objtype = 'SNMP::Info::Layer3::CiscoFWSM'
             if ( $desc =~ /Cisco Firewall Services Module/i );
@@ -1503,6 +1640,13 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer2::HPVC'
             if ( $desc =~ /HP\sVC\s/ );
 
+        # Aironet - IOS
+        # Starting with IOS 15, Aironet reports sysServices 6, even though
+        # it still is the same layer2 access point.
+        $objtype = 'SNMP::Info::Layer2::Aironet'
+            if ($desc =~ /\b(C1100|C1130|C1140|AP1200|C350|C1200|C1240|C1250)\b/
+            and $desc =~ /\bIOS\b/ );
+
         # Generic device classification based upon sysObjectID
         if (    ( $objtype eq 'SNMP::Info::Layer3' )
             and ( defined($id) )
@@ -1544,6 +1688,11 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer3::C6500'
             if ( $desc =~ /(C2970|C2960)/ );
 
+        #   Cisco Small Business (300 500) series override
+        #   This is for enterprises(1).cisco(9).otherEnterprises(6).ciscosb(1)
+        $objtype = 'SNMP::Info::Layer2::CiscoSB'
+            if ( $soid =~ /^\.1\.3\.6\.1\.4\.1\.9\.6\.1/ );
+        
         # HP, older ProCurve models (1600, 2400, 2424m, 4000, 8000)
         $objtype = 'SNMP::Info::Layer2::HP4000'
             if $desc =~ /\b(J4093A|J4110A|J4120A|J4121A|J4122A|J4122B)\b/;
@@ -1592,7 +1741,7 @@ sub device_type {
 
         #  Aironet - IOS
         $objtype = 'SNMP::Info::Layer2::Aironet'
-            if ($desc =~ /\b(C1100|C1130|AP1200|C350|C1200|C1240|C1250)\b/
+            if ($desc =~ /\b(C1100|C1130|C1140|AP1200|C350|C1200|C1240|C1250)\b/
             and $desc =~ /\bIOS\b/ );
 
         # Aironet - non IOS
@@ -1657,8 +1806,8 @@ sub device_type {
         $objtype = 'SNMP::Info::Layer3::Cisco'
             if ( $desc =~ /Cisco PIX Security Appliance/i );
 
-        # Cisco ASA
-        $objtype = 'SNMP::Info::Layer3::Cisco'
+        # Cisco ASA, older version which doesn't report layer 3 functionality
+        $objtype = 'SNMP::Info::Layer3::CiscoASA'
             if ( $desc =~ /Cisco Adaptive Security Appliance/i );
 
         # HP Virtual Connect blade switches
@@ -2418,7 +2567,7 @@ sub _get_topo_data {
     my $topo_cap = shift;
     my $method   = shift;
 
-    return unless $method =~ /(ip|if|port|id|platform)/;
+    return unless $method =~ /(ip|if|port|id|platform|cap)/;
 
     my %t_data;
     foreach my $proto (@$topo_cap) {
@@ -2573,7 +2722,8 @@ sub c_id {
 
 Returns reference to hash.  Key: iid, Value: Remote Device Type
 
-Note:  LLDP and EDP do not provide this information.
+Note:  EDP does not provide this information.  LLDP uses (C<lldpRemSysDesc>)
+or C<lldp_rem_sysname> as the closest match.
 
 =cut
 
@@ -2595,6 +2745,34 @@ sub c_platform {
     return _get_topo_data ($self, $partial, $topo_cap, 'platform');
 }
 
+=item $info->c_cap(partial, topology_protocol_arrayref)
+
+Returns reference to hash of arrays.  Key: iid, Value: Array of capabilities 
+supported by the device.  See the specific protocol class for string values
+which could be elements within the array. 
+
+Note:  Only CDP and LLDP support this method.
+
+=cut
+
+sub c_cap {
+    my $self     = shift;
+    my $partial  = shift;
+    my $topo_cap = shift;
+
+    # Default to old behavior if not called with topo_cap
+    if ( !$topo_cap ) {
+        my $topo_test = $self->has_topo();
+        if ($topo_test) {
+            $topo_cap = $topo_test;
+        }
+        else {
+            return;
+        }
+    }
+    return _get_topo_data ($self, $partial, $topo_cap, 'cap');
+}
+
 =back
 
 =head1 SETTING DATA VIA SNMP
@@ -2648,6 +2826,38 @@ Beware, calling $info->error() clears the error.
 
 =head1 EXTENDING SNMP::INFO
 
+To support a new class (vendor or platform) of device, add a Perl package with
+the data structures and methods listed below.
+
+If this seems a little scary, then the SNMP::Info developers are usually happy
+to accept the SNMP data from your device and make an attempt at the class
+themselves. Usually a "beta" release will go to CPAN for you to verify the
+implementation.
+
+=head2 Gathering MIB data for SNMP::Info Developers
+
+The preference is to open a feature request in the SourceForge project.  This
+allows all developers to have visibility into the request.  Please include
+pointers to the applicable platform MIBs.  For development we will need an
+C<snmpwalk> of the device.  There is a tool now included in the SNMP::Info
+distribution to help with this task, although you'll most likely need to
+download the distribution from CPAN as it's included in the "C<t/util>"
+directory.
+
+The utility is named C<make_snmpdata.pl>. Run it with a command line like:
+
+ ./make_snmpdata.pl -c community -i -d device_ip \
+  -m /home/netdisco-mibs/rfc:/home/netdisco-mibs/net-snmp:/home/netdisco-mibs/dir3 \
+  SNMPv2-MIB IF-MIB EtherLike-MIB BRIDGE-MIB Q-BRIDGE-MIB ENTITY-MIB \
+  POWER-ETHERNET-MIB IPV6-MIB LLDP-MIB DEVICE-SPECIFIC-MIB-NAME(s) > output.txt
+
+This will print to the file every MIB entry with data in a format that the
+developers can use to emulate read operations without needing access to the
+device.  Preference would be to mask any sensitive data in the output, zip the
+file, and upload as an attachment to the Sourceforge tracker.  However, if you
+do not feel comfortable  uploading the output to the tracker you could e-mail
+it to the developer that has claimed the ticket.
+
 =head2 Data Structures required in new Subclass
 
 A class inheriting this class must implement these data structures : 
@@ -3188,21 +3398,7 @@ sub munge_bits {
     my $bits = shift;
     return unless defined $bits;
 
-    return unpack( "b*", $bits );
-}
-
-=item munge_caps
-
-Takes an octet string and returns an ascii binary string, 7 digits long, MSB.
-
-=cut
-
-sub munge_caps {
-    my $caps = shift;
-    return unless defined $caps;
-
-    my $bits = substr( unpack( "B*", $caps ), -7 );
-    return $bits;
+    return unpack( "B*", $bits );
 }
 
 =item munge_counter64
@@ -3263,15 +3459,15 @@ sub munge_port_list {
 
 =item munge_null()
 
-Removes nulls from a string
+Removes control characters from a string
 
 =cut
 
-# munge_null() - removes nulls (\0)
+# munge_null() - removes nulls (\0) and other control characters
 sub munge_null {
     my $text = shift || return;
 
-    $text =~ s/\0//g;
+    $text =~ s/[[:cntrl:]]//g;
     return $text;
 }
 
@@ -3512,22 +3708,25 @@ sub _global {
         $attr =~ s/^(load|orig)_//;
         $attr =~ s/_raw$//;
 
-        # Get the callback hash for data munging
-        my $munge = $self->munge();
-
         # Return cached data unless loading
         # We now store in raw format so munge before returning
         # unless expecting raw data
         if ( defined $self->{"_$attr"} && !$load ) {
-            if ( defined $munge->{$attr} && !$raw ) {
-                my $val    = $self->{"_$attr"};
-                my $subref = $munge->{$attr};
-                return &$subref($val);
+            my $val = $self->{"_$attr"};
+
+            if ( !$raw ) {
+                return $self->_munge($attr, $val);
             } else{
-                return $self->{"_$attr"};
+                return $val;
             } 
         }
 
+        if ( $self->{Offline} ) {
+            $self->error_throw(
+                "SNMP::Info::_global: Offline but $attr is not in cache\n" );
+            return;
+        }
+
         if ( $self->debug() ) {
             # Let's get the MIB Module and leaf name along with the OID
             my $qual_leaf = SNMP::translateObj($oid,0,1) || '';
@@ -3555,12 +3754,11 @@ sub _global {
         }
 
         # Save Cached Value
-        $self->{"_$attr"} = $val;
+        $self->_cache($attr, $val);
 
         # Data Munging
-        if ( defined $munge->{$attr} && !$raw ) {
-            my $subref = $munge->{$attr};
-            $val = &$subref($val);
+        if ( !$raw ) {
+            $val = $self->_munge($attr, $val);
         }
 
         return $val;
@@ -3837,7 +4035,6 @@ sub _load_attr {
         my $ver    = $self->snmp_ver();
         my $nosuch = $self->nosuch();
         my $store  = $self->store();
-        my $munge  = $self->munge();
 
         my $load = $method =~ /^load/;
         my $raw  = $method =~ /raw$/;
@@ -3854,6 +4051,12 @@ sub _load_attr {
             && !$load
             && !defined $partial );
 
+        if ( $self->{Offline} ) {
+            $self->error_throw(
+                "SNMP::Info::_load_atrr: Offline but $attr is not in cache\n" );
+            return;
+        }
+
         # We want the qualified leaf name so that we can
         # specify the Module (MIB) in the case of private leaf naming
         # conflicts.  Example: ALTEON-TIGON-SWITCH-MIB::agSoftwareVersion
@@ -4017,24 +4220,14 @@ sub _load_attr {
 
         # Cache data if we are not getting partial data:
         if ( !defined $partial ) {
-            $self->{"_${attr}"}++;
-            $store->{$attr} = $localstore;
+            $self->_cache($attr, $localstore);
         }
 
         # Data Munging
-        # Checks for an entry in %munge and munges values unless we expect
-        # raw data
-        if ( defined $munge->{$attr} && !$raw ) {
-            my $subref = $munge->{$attr};
-            my %munged;
-            foreach my $key ( keys %$localstore ) {
-                my $value = $localstore->{$key};
-                next unless $key;
-                my $munged_value = &$subref($value);
-                $munged{$key} = $munged_value;
-            }
-            return \%munged;
+        if ( !$raw ) {
+            $localstore = $self->_munge($attr, $localstore);
         }
+
         return $localstore;
     }
 }
@@ -4043,11 +4236,6 @@ sub _load_attr {
 
 Used internally by AUTOLOAD to return data called by methods listed in %FUNCS.
 
-Called like $info->METHOD().
-
-The first time ran, it will call $info->load_METHOD().  
-Every time after it will return cached data.
-
 =cut
 
 sub _show_attr {
@@ -4057,20 +4245,9 @@ sub _show_attr {
 
     my $store = $self->store();
 
-    # Get the callback hash for data munging
-    my $munge = $self->munge();
-
-    if ( defined $munge->{$attr} && !$raw ) {
+    if ( !$raw ) {
         my $localstore = $store->{$attr};
-        my $subref = $munge->{$attr};
-        my %munged;
-        foreach my $key ( keys %$localstore ) {
-            my $value = $localstore->{$key};
-            next unless $key;
-            my $munged_value = &$subref($value);
-            $munged{$key} = $munged_value;
-        }
-        return \%munged;
+        return $self->_munge($attr, $localstore);
     }
     else {
         return $store->{$attr};
@@ -4089,6 +4266,7 @@ sub snmp_connect_ip {
     my $ver  = $self->snmp_ver();
     my $comm = $self->snmp_comm();
 
+    return if $self->{Offline};
     return if ( $ip eq '0.0.0.0' ) or ( $ip =~ /^127\./ );
 
     # Create session object
@@ -4144,6 +4322,66 @@ sub modify_port_list {
     return pack( "B*", join( '', @$portlist ) );
 }
 
+=item $info->_cache(attr, data)
+
+Cache retrieved data so that if it's asked for again, we use the cache instead
+of going back to Net-SNMP. Data is cached inside the blessed hashref C<$self>.
+
+Accepts the leaf and value (scalar, or hashref for a table). Does not return
+anything useful.
+
+=cut
+
+sub _cache {
+    my $self = shift;
+    my ($attr, $data) = @_;
+    my $store = $self->store();
+
+    if (ref {} eq ref $data) {
+        $self->{"_${attr}"}++;
+        $store->{$attr} = $data;
+    }
+    else {
+        $self->{"_$attr"} = $data;
+    }
+}
+
+=item $info->_munge(attr, data)
+
+Raw data returned from Net-SNMP might not be formatted correctly or might have
+platform-specific bugs or mistakes. The MUNGE feature of SNMP::Info allows for
+fixups to take place.
+
+Accepts the leaf and value (scalar, or hashref for a table) and returns the raw
+or the munged data, as appropriate. That is, you do not need to know whether
+MUNGE is installed, and it's safe to call this method regardless.
+
+=cut
+
+sub _munge {
+    my $self = shift;
+    my ($attr, $data) = @_;
+    my $munge = $self->munge();
+
+    return $data unless defined $munge->{$attr};
+
+    if (ref {} eq ref $data) {
+        my $subref = $munge->{$attr};
+        my %munged;
+        foreach my $key ( keys %$data ) {
+            my $value = $data->{$key};
+            next unless defined $value;
+            $munged{$key} = $subref->($value);
+        }
+        return \%munged;
+    }
+    else {
+        return unless $data;
+        my $subref = $munge->{$attr};
+        return $subref->($data);
+    }
+}
+
 =item _validate_autoload_method(method)
 
 Used internally by AUTOLOAD to validate that a dynamic method should be
@@ -4256,14 +4494,7 @@ sub can {
     my $method = shift;
 
     # use results of parent can()
-    my $meth_ref = $self->SUPER::can($method);
-
-    # Don't return if passed $super as it means we were called
-    # from AUTOLOAD for a method that hasn't been generated yet.
-    if ($meth_ref) {
-        return $meth_ref
-            unless ( defined $AUTOLOAD && $AUTOLOAD =~ /SUPER::$method$/ );
-    }
+    return $self->SUPER::can($method) if $self->SUPER::can($method);
 
     my $validated = $self->_validate_autoload_method($method);
     return unless $validated;
@@ -4330,7 +4561,7 @@ subclass.
 =cut
 
 sub AUTOLOAD {
-    my $self    = shift;
+    my $self = shift;
     my ($sub_name) = $AUTOLOAD =~ /::(\w+)$/;
 
     return if $sub_name =~ /DESTROY$/;
@@ -4348,10 +4579,19 @@ sub AUTOLOAD {
         );
     }
 
+    # This enables us to use SUPER:: for AUTOLOAD methods as well
+    # as the true OO methods.  Method needs to be renamed to prevent
+    # namespace collision when we insert into the symbol table later.
+    if ( $AUTOLOAD =~ /SUPER::$sub_name$/ ) {
+        $AUTOLOAD =~ s/SUPER::$sub_name/orig_$sub_name/;
+        $sub_name = "orig_$sub_name";
+    }
+
     return unless my $meth_ref = $self->can($sub_name, @_);
     return $self->$meth_ref(@_);
 
 }
+
 1;
 
 =head1 COPYRIGHT AND LICENSE

Info/AMAP.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS
     = ( 'ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB' => 'aipAMAPRemDeviceType', );

Info/AdslLine.pm

@@ -38,7 +38,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'ADSL-LINE-MIB' => 'adslLineType' );
 

Info/Aggregate.pm

@@ -1,6 +1,6 @@
-# $Id$
+# SNMP::Info::Aggregate
 #
-# Copyright (c) 2005 Matt Tuttle
+# Copyright (c) 2014 SNMP::Info Developers
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -27,88 +27,103 @@
 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 # POSSIBILITY OF SUCH DAMAGE.
 
-package SNMP::Info::CiscoImage;
+package SNMP::Info::Aggregate;
 
 use strict;
 use Exporter;
 use SNMP::Info;
 
-@SNMP::Info::CiscoImage::ISA       = qw/SNMP::Info Exporter/;
-@SNMP::Info::CiscoImage::EXPORT_OK = qw//;
+@SNMP::Info::Aggregate::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::Aggregate::EXPORT_OK = qw/agg_ports_ifstack/;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
-%MIBS = ( 'CISCO-IMAGE-MIB' => 'ciscoImageString', );
+%MIBS = (); # IF-MIB
 
 %GLOBALS = ();
 
-%FUNCS = ( 'ci_images' => 'ciscoImageString', );
+%FUNCS = ();
 
 %MUNGE = ();
 
+sub agg_ports_ifstack {
+  my $dev = shift;
+  my $partial = shift;
+
+  my $ifStack = $dev->ifStackStatus();
+  # TODO: if we want to do partial, we need to use inverse status
+  my $ifType = $dev->ifType();
+
+  my $ret = {};
+
+  foreach my $idx ( keys %$ifStack ) {
+      my ( $higher, $lower ) = split /\./, $idx;
+      next if ( $higher == 0 or $lower == 0 );
+      if ( $ifType->{ $higher } eq 'ieee8023adLag' ) {
+          $ret->{ $lower } = $higher;
+      }
+  }
+
+  return $ret;
+}
+
 1;
+
 __END__
 
 =head1 NAME
 
-SNMP::Info::CiscoImage - SNMP Interface to image strings for Cisco Devices
+SNMP::Info::Aggregate - SNMP Interface to ifStackTable Aggregated Links
 
 =head1 AUTHOR
 
-Matt Tuttle (C<mtuttle@americanhebrewacademy.org>)
+SNMP::Info Developers
 
 =head1 SYNOPSIS
 
- # Let SNMP::Info determine the correct subclass for you.
- my $ci = new SNMP::Info(
-                AutoSpecify => 1,
-                Debug       => 1,
-                # These arguments are passed directly on to SNMP::Session
-                DestHost    => 'myswitch',
-                Community   => 'public',
-                Version     => 2
-                )
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
     or die "Can't connect to DestHost.\n";
 
- my $class = $ci->class();
+ my $class = $info->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
 
-SNMP::Info::CiscoImage is a subclass of SNMP::Info that provides access to
-image strings embedded in an image running on Cisco Devices.
+This class provides access to Aggregated Links configuration on devices
+supporting C<ifStackTable>.
 
 Use or create in a subclass of SNMP::Info.  Do not use directly.
 
 =head2 Inherited Classes
 
-None.
+L<SNMP::Info>
 
 =head2 Required MIBs
 
 =over
 
-=item F<CISCO-IMAGE-MIB>
+=item F<IF-MIB>
 
 =back
 
-MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+=head1 METHODS
 
-=head1 GLOBALS
+=over 4
 
-None.
+=item C<agg_ports_ifstack>
 
-=head1 TABLE METHODS
-
-=over
-
-=item $ci->ci_images()
-
-Returns the table of image strings.
-
-C<ciscoImageString>
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
 
 =back
 

Info/Airespace.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -577,6 +577,13 @@ sub bp_index {
     return \%bp_index;
 }
 
+sub fw_mac {
+    my $airespace = shift;
+    my $partial   = shift;
+
+    return $airespace->SUPER::fw_mac($partial);
+}
+
 sub fw_port {
     my $airespace = shift;
     my $partial   = shift;
@@ -688,42 +695,52 @@ sub i_ssidmac {
     foreach my $oid ( keys %$ssidlist ) {
 
         my @parts    = split( /\./, $oid );
-        my $ssid_idx = pop (@parts);
-        my $slot     = pop (@parts);
-        my $last     = pop (@parts);
+        my $ssid_idx = pop(@parts);
+        my $slot     = pop(@parts);
+        my $last     = pop(@parts);
 
         my $iid = $oid;
+
         # Get radio band
         $iid =~ s/\.\d+$//;
         my $ap_type = $apif_type->{$iid};
+
         # Determine if IOS based
         $iid =~ s/\.\d+$//;
         my $ios = $ap_ios->{$iid} || '';
-        
-        # Four cases:
-        # IOS and 2.4Ghz count up, starts at zero
-        if ($ios and $ap_type =~ /b$/) {
-            $last = $last + ($ssid_idx - 1);
+
+        # 17 can be used as index for 3rd Party AP's.  We only have one
+        # hexadecimal digit to work with so skip if outside the range
+        if ( $ssid_idx > 0 and $ssid_idx < 17 ) {
+
+            # Four cases:
+            # IOS and 2.4Ghz count up, starts at zero
+            if ( $ios and $ap_type =~ /b$/ ) {
+                $last = $last + ( $ssid_idx - 1 );
+            }
+
+            # IOS and 5Ghz - count down from maximum of 16
+            elsif ( $ios and $ap_type =~ /a$/ ) {
+                $last = $last + ( 16 - $ssid_idx );
+            }
+
+            # VxWorks and 5Ghz - count up, starts at zero
+            elsif ( $ios and $ap_type =~ /a$/ ) {
+                $last = $last + ( $ssid_idx - 1 );
+            }
+
+            # VxWorks and 2.4Ghz - count down from maximum of 16
+            else {
+                $last = $last + ( 16 - $ssid_idx );
+            }
         }
-        # IOS and 5Ghz - count down from maximum of 16
-        elsif ($ios and $ap_type =~ /a$/) {
-            $last = $last + (16 - $ssid_idx);
-        }
-        # VxWorks and 5Ghz - count up, starts at zero
-        elsif ($ios and $ap_type =~ /a$/) {
-            $last = $last + ($ssid_idx - 1);
-        }
-        # VxWorks and 2.4Ghz - count down from maximum of 16
-        else {
-            $last = $last + (16 - $ssid_idx);
-        }
-        
-       push (@parts, $last);
-       my $bssid = join( ':', map { sprintf( "%02x", $_ ) } @parts );
-       $i_ssidmac{$oid} = $bssid;
+
+        push( @parts, $last );
+        my $bssid = join( ':', map { sprintf( "%02x", $_ ) } @parts );
+        $i_ssidmac{$oid} = $bssid;
     }
 
-   return \%i_ssidmac;
+    return \%i_ssidmac;
 }
 
 sub i_80211channel {
@@ -1225,12 +1242,9 @@ switch.
 
 =item $airespace->layers()
 
-Returns 00000011.  Class emulates Layer 2 functionality for Thin APs through
+Returns 00000111.  Class emulates Layer 2 functionality for Thin APs through
 proprietary MIBs.
 
-=item $airespace->at_netaddr()
-=item $airespace->at_paddr()
-
 =item $airespace->serial()
 
 (C<agentInventorySerialNumber>)
@@ -1257,7 +1271,7 @@ Returns reference to hash.  Indicates whether the SSID is broadcast.
 Returns reference to hash.  Current operating frequency channel of the radio
 interface.
 
-=item $dot11->dot11_cur_tx_pwr_mw()
+=item $airespace->dot11_cur_tx_pwr_mw()
 
 Returns reference to hash.  Current transmit power, in milliwatts, of the
 radio interface.
@@ -1678,15 +1692,15 @@ airespace_if_name() for virtual interfaces.
 
 =item $airespace->i_description()
 
-Returns reference to map of IIDs to interface types.  Returns C<ifDescr>
-for Ethernet interfaces, airespace_ap_loc() for thin AP interfaces, and
-airespace_if_name() for virtual interfaces.
+Returns reference to map of IIDs to interface descriptions.  Returns
+C<ifDescr> for Ethernet interfaces, airespace_ap_loc() for thin AP
+interfaces, and airespace_if_name() for virtual interfaces.
 
 =item $airespace->i_type()
 
-Returns reference to map of IIDs to interface descriptions.  Returns
-C<ifType> for Ethernet interfaces, airespace_apif_type() for thin AP
-interfaces, and airespace_if_type() for virtual interfaces.
+Returns reference to map of IIDs to interface types.  Returns C<ifType>
+for Ethernet interfaces, airespace_apif_type() for thin AP interfaces, and
+airespace_if_type() for virtual interfaces.
 
 =item $airespace->i_up()
 
@@ -1809,6 +1823,24 @@ entity which 'contains' this entity.
 
 =back
 
+=head2 Arp Cache Table Augmentation
+
+The controller has knowledge of MAC->IP mappings for wireless clients.
+Augmenting the arp cache data with these MAC->IP mappings enables visibility
+for stations that only communicate locally.
+
+=over
+
+=item $airespace->at_paddr()
+
+Adds MAC addresses extracted from the index of C<bsnMobileStationIpAddress>.
+
+=item $airespace->at_netaddr()
+
+Adds IP addresses from C<bsnMobileStationIpAddress>.
+
+=back
+
 =head1 Data Munging Callback Subroutines
 
 =over

Info/Bridge.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'BRIDGE-MIB'   => 'dot1dBaseBridgeAddress',
@@ -189,6 +189,35 @@ sub qb_i_vlan_t {
     return $i_vlan;
 }
 
+# Most devices now support Q-BRIDGE-MIB, fall back to 
+# BRIDGE-MIB for those that don't.
+sub fw_mac {
+    my $bridge = shift;
+
+    my $qb = $bridge->qb_fw_mac();
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $bridge->SUPER::fw_mac();
+}
+
+sub fw_port {
+    my $bridge = shift;
+
+    my $qb = $bridge->qb_fw_port();
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $bridge->SUPER::fw_port();
+}
+
+sub fw_status {
+    my $bridge = shift;
+
+    my $qb = $bridge->qb_fw_status();
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+    
+    return $bridge->SUPER::fw_status();
+}
+
 sub i_stp_state {
     my $bridge  = shift;
     my $partial = shift;
@@ -308,6 +337,8 @@ sub i_vlan {
     return $i_vlan;
 }
 
+sub i_untagged { goto &i_vlan }
+
 sub i_vlan_membership {
     my $bridge  = shift;
     my $partial = shift;
@@ -365,6 +396,8 @@ sub set_i_vlan {
     return;
 }
 
+sub set_i_untagged { goto &set_i_vlan }
+
 sub set_add_i_vlan_tagged {
     my $bridge = shift;
 
@@ -597,6 +630,10 @@ to a hash.
 
 Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
+=item $vtp->i_untagged()
+
+An alias for C<i_vlan>.
+
 =item $bridge->i_vlan_membership()
 
 Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
@@ -893,6 +930,10 @@ operations.
 
 Currently unsupported.  Throws an error and returns.
 
+=item $bridge->set_i_untagged(vlan, ifIndex)
+
+An alias for C<set_i_vlan>.
+
 =item $bridge->set_i_pvid(pvid, ifIndex)
 
 Currently unsupported.  Throws an error and returns.
@@ -905,4 +946,6 @@ Currently unsupported.  Throws an error and returns.
 
 Currently unsupported.  Throws an error and returns.
 
+=back
+
 =cut

Info/CDP.pm

@@ -40,9 +40,10 @@ use SNMP::Info;
 @SNMP::Info::CDP::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::CDP::EXPORT_OK = qw//;
 
-use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT/;
+use vars
+    qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT %CDP_CAPABILITIES/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # Five data structures required by SNMP::Info
 %MIBS = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' );
@@ -76,7 +77,7 @@ $VERSION = '3.00_003';
 );
 
 %MUNGE = (
-    'cdp_capabilities' => \&SNMP::Info::munge_caps,
+    'cdp_capabilities' => \&SNMP::Info::munge_bits,
     'cdp_platform'     => \&SNMP::Info::munge_null,
     'cdp_domain'       => \&SNMP::Info::munge_null,
     'cdp_port'         => \&SNMP::Info::munge_null,
@@ -87,6 +88,20 @@ $VERSION = '3.00_003';
 
 );
 
+%CDP_CAPABILITIES = (
+    'Router'                  => 0x001,
+    'Trans-Bridge'            => 0x002,
+    'Source-Route-Bridge'     => 0x004,
+    'Switch'                  => 0x008,
+    'Host'                    => 0x010,
+    'IGMP'                    => 0x020,
+    'Repeater'                => 0x040,
+    'VoIP-Phone'              => 0x080,
+    'Remotely-Managed-Device' => 0x100,
+    'Supports-STP-Dispute'    => 0x200,
+    'Two-port Mac Relay'      => 0x400,
+);
+
 sub munge_power {
     my $power = shift;
     my $decimal = substr( $power, -3 );
@@ -160,6 +175,41 @@ sub cdp_ip {
     return \%cdp_ip;
 }
 
+sub cdp_cap {
+    my $cdp     = shift;
+    my $partial = shift;
+
+    # Some devices return a hex-string, others return a space separated
+    # string, we need the raw data to determine return value and
+    # take appropriate action
+    my $cdp_caps = $cdp->cdp_capabilities_raw($partial) || {};
+
+    my %cdp_cap;
+    foreach my $key ( keys %$cdp_caps ) {
+        my $cap_raw = $cdp_caps->{$key};
+        next unless $cap_raw;
+
+        # Simple check, smallest single string is either Host or IGMP with a
+        # space added on the end for a length of 5, hex string is normally
+        # 4 bytes, but since only one byte was traditionally needed process
+        # as hex for a length of 4 or less
+        if ( length $cap_raw < 5 ) {
+            my $cap_hex = join( '',
+                map { sprintf "%x", $_ } unpack( 'C*', $cap_raw ) );
+            foreach my $capability ( keys %CDP_CAPABILITIES ) {
+                if ( ( hex $cap_hex ) & $CDP_CAPABILITIES{$capability} ) {
+                    push( @{ $cdp_cap{$key} }, $capability );
+                }
+            }
+        }
+        else {
+            my @caps = split /\s/, $cap_raw;
+            push( @{ $cdp_cap{$key} }, @caps );
+        }
+    }
+    return \%cdp_cap;
+}
+
 1;
 __END__
 
@@ -283,39 +333,48 @@ to a hash.
 =item $cdp->cdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
-binary string, 7 digits long, MSB.  Each digit represents a bit from the
-table below.
-
-From L<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#18843>:
+binary string, MSB.  Each digit represents a bit from the table below from 
+the CDP Capabilities Mapping to Smartport Type table within the
+Cisco Small Business 200 Series Smart Switch Administration Guide, 
+L<http://www.cisco.com/c/en/us/support/switches/small-business-200-series-smart-switches/products-maintenance-guides-list.html>:
 
 (Bit) - Description
 
 =over
 
-=item (0x40) - Provides level 1 functionality.
+=item (0x400) - Two-Port MAC Relay.
 
-=item (0x20) - The bridge or switch does not forward IGMP Report packets on
+=item (0x200) - CAST Phone Port / CVTA / Supports-STP-Dispute depending
+                upon platform.
+
+=item (0x100) - Remotely-Managed Device.
+
+=item (0x80)  - VoIP Phone.
+
+=item (0x40)  - Provides level 1 functionality.
+
+=item (0x20)  - The bridge or switch does not forward IGMP Report packets on
 non router ports.
 
-=item (0x10) - Sends and receives packets for at least one network layer
+=item (0x10)  - Sends and receives packets for at least one network layer
 protocol. If the device is routing the protocol, this bit should not be set.
 
-=item (0x08) - Performs level 2 switching. The difference between this bit
+=item (0x08)  - Performs level 2 switching. The difference between this bit
 and bit 0x02 is that a switch does not run the Spanning-Tree Protocol. This
 device is assumed to be deployed in a physical loop-free topology.
 
-=item (0x04) - Performs level 2 source-route bridging. A source-route bridge
+=item (0x04)  - Performs level 2 source-route bridging. A source-route bridge
 would set both this bit and bit 0x02.
 
-=item (0x02) - Performs level 2 transparent bridging.
+=item (0x02)  - Performs level 2 transparent bridging.
 
-=item (0x01) - Performs level 3 routing for at least one network layer
+=item (0x01)  - Performs level 3 routing for at least one network layer
 protocol.
 
 =back
 
-Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to this
-information.
+Thanks to Martin Lorensen for a pointer to the original information and
+CPAN user Alex for updates.
 
 (C<cdpCacheCapabilities>)
 
@@ -427,6 +486,14 @@ for decimal placement.
 
 (C<cdpCachePowerConsumption>)
 
+=item  $cdp->cdp_cap() 
+
+Returns hash of arrays with each array containing the system capabilities
+supported by the remote system.  Possible elements in the array are
+C<Router>, C<Trans-Bridge>, C<Source-Route-Bridge>, C<Switch>, C<Host>,
+C<IGMP>, C<Repeater>, C<VoIP-Phone>, C<Remotely-Managed-Device>,
+C<Supports-STP-Dispute>, and C<Two-port Mac Relay>.
+
 =back
 
 =head1 Data Munging Callback Subroutines

Info/CiscoAgg.pm

@@ -0,0 +1,150 @@
+# SNMP::Info::CiscoAgg
+#
+# Copyright (c) 2014 SNMP::Info Developers
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoAgg;
+
+use strict;
+use Exporter;
+use SNMP::Info::IEEE802dot3ad 'agg_ports_lag';
+
+@SNMP::Info::CiscoAgg::ISA = qw/
+  SNMP::Info::IEEE802dot3ad
+  Exporter
+/;
+@SNMP::Info::CiscoAgg::EXPORT_OK = qw/
+  agg_ports
+/;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = (
+  %SNMP::Info::IEEE802dot3ad::MIBS,
+  'CISCO-PAGP-MIB'   => 'pagpGroupIfIndex',
+);
+
+%GLOBALS = ();
+
+%FUNCS = ();
+
+%MUNGE = ();
+
+sub agg_ports_pagp {
+  my $dev = shift;
+
+  # Note that this mapping will miss any interfaces that are down during
+  # polling. If one of the members is up, we could use
+  # pagpAdminGroupCapability to figure things out, but if they're all
+  # down, we're hosed. Since we could be hosed anyway, we skip the fancy
+  # stuff.
+  my $mapping = {};
+  my $group = $dev->pagpGroupIfIndex;
+  for my $slave (keys %$group) {
+    my $master = $group->{$slave};
+    next if($master == 0 || $slave == $master);
+
+    $mapping->{$slave} = $master;
+  }
+
+  return $mapping;
+}
+
+# until we have PAgP data and need to combine with LAG data
+sub agg_ports {
+  my $ret = {%{agg_ports_pagp(@_)}, %{agg_ports_lag(@_)}};
+  return $ret;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoAgg - SNMP Interface to Cisco Aggregated Links
+
+=head1 AUTHOR
+
+SNMP::Info Developers
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $info->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+This class provides access to Aggregated Links configuration on Cisco devices.
+It combines Cisco PAgP and IEEE 802.3ad information.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+L<SNMP::Info::IEEE802dot3ad>
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-PAGP-MIB>
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 METHODS
+
+=over 4
+
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
+=item C<agg_ports_pagp>
+
+Implements the PAgP LAG info retrieval. Merged into C<agg_ports> data
+automatically.
+
+=back
+
+=cut

Info/CiscoConfig.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'CISCO-CONFIG-COPY-MIB' => 'ccCopyTable',

Info/CiscoPortSecurity.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PAECAPABILITIES/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'CISCO-PORT-SECURITY-MIB' => 'ciscoPortSecurityMIB',

Info/CiscoPower.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'CISCO-POWER-ETHERNET-EXT-MIB' => 'cpeExtPsePortEntPhyIndex',
           'CISCO-CDP-MIB' => 'cdpCachePowerConsumption' );

Info/CiscoQOS.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'CISCO-CLASS-BASED-QOS-MIB' => 'cbQosIfIndex', );
 

Info/CiscoRTT.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'CISCO-RTTMON-MIB' => 'rttMonCtrlAdminOwner', );
 

Info/CiscoStack.pm

@@ -32,14 +32,13 @@ package SNMP::Info::CiscoStack;
 
 use strict;
 use Exporter;
-use SNMP::Info;
 
-@SNMP::Info::CiscoStack::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoStack::ISA       = qw/Exporter/;
 @SNMP::Info::CiscoStack::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'CISCO-STACK-MIB' => 'ciscoStackMIB', );
 

Info/CiscoStats.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'SNMPv2-MIB'            => 'sysDescr',
@@ -88,6 +88,9 @@ $VERSION = '3.00_003';
 
     # CISCO-FLASH-MIB::ciscoFlashDeviceTable
     'cisco_flash_size' => 'ciscoFlashDeviceSize',
+    
+    # CISCO-IMAGE-MIB
+    'ci_images' => 'ciscoImageString',
 );
 
 %MUNGE = ();
@@ -103,6 +106,7 @@ sub os {
     # order here matters - there are Catalysts that run IOS and have catalyst
     # in their description field, as well as Catalysts that run IOS-XE.
     return 'ios-xe'   if ( $descr =~ /IOS-XE/ );
+    return 'ios-xr'   if ( $descr =~ /IOS XR/ );
     return 'ios'      if ( $descr =~ /IOS/ );
     return 'catalyst' if ( $descr =~ /catalyst/i );
     return 'css'      if ( $descr =~ /Content Switch SW/ );
@@ -198,6 +202,13 @@ sub os_ver {
         return $1;
     }
 
+    if ( defined $os
+        and $os eq 'ios-xr'
+        and defined $descr
+        and $descr =~ m/Version (\d+[\.\d]+)/ )
+    {
+        return $1;
+    }
 
     # Newer Catalysts and IOS devices
     if ( defined $descr
@@ -409,6 +420,7 @@ Available values:
 
  'ios'          for Cisco IOS
  'ios-xe'       for Cisco IOS XE
+ 'ios-xr'       for Cisco IOS XR
  'pix'          for Cisco PIX
  'asa'          for Cisco ASA
  'fwsm'         for Single-mode FWSM
@@ -530,4 +542,16 @@ zero if the device has been removed.
 
 =back
 
+=head2 Cisco Image Table (C<ciscoImageTable>)
+
+=over
+
+=item $ci->ci_images()
+
+Returns the table of image strings.
+
+C<ciscoImageString>
+
+=back
+
 =cut

Info/CiscoStpExtensions.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Bridge;
 
 use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 @SNMP::Info::CiscoStpExtensions::ISA = qw/SNMP::Info::Bridge SNMP::Info Exporter/;
 @SNMP::Info::CiscoStpExtensions::EXPORT_OK = qw//;

Info/CiscoVTP.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'CISCO-VTP-MIB'                       => 'vtpVlanName',
@@ -172,8 +172,7 @@ sub i_vlan {
     }
 
     # Check in CISCO-VLAN-IFTABLE-RELATION-MIB
-    # Is this only for Aironet???  If so, it needs
-    # to be removed from this class
+    # Used for traditional Cisco Routers and Aironet
 
     my $v_cvi_if = $vtp->v_cvi_if();
     if ( defined $v_cvi_if ) {
@@ -191,6 +190,22 @@ sub i_vlan {
     return \%i_vlans;
 }
 
+sub i_untagged {
+    my $vtp = shift;
+    my ( $ifindex ) = @_;
+
+    # cannot defer to i_vlan - vtp_trunk_dyn_stat is not useful for down ports
+    # so we use vtp_trunk_dyn as a hint to use i_pvid
+
+    my $trunking = eval { $vtp->vtp_trunk_dyn($ifindex)->{$ifindex} };
+    if ($trunking and (($trunking eq 'on') or ($trunking eq 'onNoNegotiate'))) {
+        return $vtp->i_pvid(@_);
+    }
+    else {
+        return $vtp->i_vlan(@_);
+    }
+}
+
 sub i_vlan_membership {
     my $vtp     = shift;
     my $partial = shift;
@@ -306,6 +321,22 @@ sub set_i_vlan {
     return;
 }
 
+sub set_i_untagged {
+    my $vtp = shift;
+    my ( $vlan_id, $ifindex ) = @_;
+
+    # cannot defer to i_vlan - vtp_trunk_dyn_stat is not useful for down ports
+    # so we use vtp_trunk_dyn as a hint to use i_pvid
+
+    my $trunking = eval { $vtp->vtp_trunk_dyn($ifindex)->{$ifindex} };
+    if ($trunking and (($trunking eq 'on') or ($trunking eq 'onNoNegotiate'))) {
+        return $vtp->set_i_pvid(@_);
+    }
+    else {
+        return $vtp->set_i_vlan(@_);
+    }
+}
+
 sub set_add_i_vlan_tagged {
     my $vtp = shift;
     my ( $vlan_id, $ifindex ) = @_;
@@ -540,6 +571,10 @@ Your device will only implement a subset of these methods.
 Returns a mapping between C<ifIndex> and assigned VLAN ID for access ports
 and the default VLAN ID for trunk ports.
 
+=item $vtp->i_untagged()
+
+An alias for C<i_vlan>.
+
 =item $vtp->i_vlan_membership()
 
 Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
@@ -835,6 +870,12 @@ port C<ifIndex>.  This method should only be used on trunk ports.
   $vtp->set_i_pvid('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't change port default VLAN. ",$vtp->error(1);
 
+=item $vtp->set_i_untagged ( vlan, ifIndex )
+
+This method attempts to work out whether the port referenced by ifIndex is
+trunking, and if so will return the value of C<set_i_pvid>. Otherwise, the
+value of C<set_i_vlan> is returned.
+
 =item $vtp->set_add_i_vlan_tagged ( vlan, ifIndex )
 
 Adds the VLAN to the enabled VLANs list of the port, must be supplied with the

Info/EDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'EXTREME-EDP-MIB'   => 'extremeEdpPortIfIndex',

Info/Entity.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'ENTITY-MIB' => 'entPhysicalSerialNum' );
 

Info/EtherLike.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'EtherLike-MIB' => 'etherMIB' );
 

Info/FDP.pm

@@ -42,7 +42,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' );
 
@@ -68,7 +68,7 @@ $VERSION = '3.00_003';
 );
 
 %MUNGE = (
-    'fdp_capabilities' => \&SNMP::Info::munge_caps,
+    'fdp_capabilities' => \&SNMP::Info::munge_bits,
     'fdp_ip'           => \&SNMP::Info::munge_ip
 );
 
@@ -289,8 +289,7 @@ CDP compatibility
 =item $fdp->fdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
-binary string, 7 digits long, MSB.  Each digit represents a bit from the
-table below.
+binary string, MSB.  Each digit represents a bit from the table below.
 
 From L<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#18843>:
 
@@ -320,8 +319,7 @@ protocol.
 
 =back
 
-Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to
-this information.
+Thanks to Martin Lorensen for a pointer to this information.
 
 (C<fdpCacheCapabilities>)
 

Info/IEEE802dot11.pm

@@ -38,7 +38,7 @@ use Exporter;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( 'IEEE802dot11-MIB' => 'dot11DesiredSSID', );
 

Info/IEEE802dot3ad.pm

@@ -0,0 +1,141 @@
+# SNMP::Info::IEEE802dot3ad
+#
+# Copyright (c) 2014 SNMP::Info Developers
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::IEEE802dot3ad;
+
+use strict;
+use Exporter;
+use SNMP::Info::Aggregate;
+
+@SNMP::Info::IEEE802dot3ad::ISA = qw/
+  SNMP::Info::Aggregate
+  Exporter
+/;
+@SNMP::Info::IEEE802dot3ad::EXPORT_OK = qw/
+  agg_ports_lag
+/;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = (
+  %SNMP::Info::Aggregate::MIBS,
+  'IEEE8023-LAG-MIB' => 'dot3adAggPortSelectedAggID',
+);
+
+%GLOBALS = ();
+
+%FUNCS = ();
+
+%MUNGE = ();
+
+sub agg_ports_lag {
+  my $dev = shift;
+
+  # TODO: implement partial
+  my $masters = $dev->dot3adAggActorOperKey;
+  my $slaves  = $dev->dot3adAggPortActorOperKey;
+
+  return {} unless
+    ref {} eq ref $masters and scalar keys %$masters
+    and ref {} eq ref $slaves and scalar keys %$slaves;
+
+  my $ret = {};
+  foreach my $s (keys %$slaves) {
+      next if $slaves->{$s} == 0;
+      foreach my $m (keys %$masters) {
+          next unless $masters->{$m} == $slaves->{$s};
+          $ret->{$s} = $m;
+          last;
+      }
+  }
+
+  return $ret;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::IEEE802dot3ad - SNMP Interface to IEEE Aggregated Links
+
+=head1 AUTHOR
+
+SNMP::Info Developers
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $info->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+This class provides access to Aggregated Links configuration on devices
+implementing C<IEEE8023-LAG-MIB>.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+L<SNMP::Info::Aggregate>
+
+=head2 Required MIBs
+
+=over
+
+=item F<IEEE8023-LAG-MIB>
+
+=back
+
+=head1 METHODS
+
+=over 4
+
+=item C<agg_ports_lag>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
+=back
+
+=cut

Info/IPv6.pm

@@ -44,7 +44,7 @@ use constant {
     IPV6MIB => 3,
 };
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 
 

Info/LLDP.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     'LLDP-MIB'          => 'lldpLocSysCapEnabled',
@@ -67,6 +67,7 @@ $VERSION = '3.00_003';
     'lldp_rem_sysname'  => 'lldpRemSysName',
     'lldp_rem_sysdesc'  => 'lldpRemSysDesc',
     'lldp_rem_sys_cap'  => 'lldpRemSysCapEnabled',
+    'lldp_rem_cap_spt'  => 'lldpRemSysCapSupported',
 
     # LLDP-MIB::lldpRemManAddrTable
     'lldp_rman_addr' => 'lldpRemManAddrIfSubtype',
@@ -80,6 +81,7 @@ $VERSION = '3.00_003';
     'lldp_rem_port_desc' => \&SNMP::Info::munge_null,
     'lldp_sys_cap'       => \&SNMP::Info::munge_bits,
     'lldp_rem_sys_cap'   => \&SNMP::Info::munge_bits,
+    'lldp_rem_cap_spt'   => \&SNMP::Info::munge_bits,
 );
 
 sub hasLLDP {
@@ -88,8 +90,12 @@ sub hasLLDP {
     # We may be have LLDP, but nothing in lldpRemoteSystemsData Tables
     # so we could be running LLDP but not return any useful information
     my $lldp_cap = $lldp->lldp_sys_cap();
-
     return 1 if defined $lldp_cap;
+
+    # If the device doesn't return local system capabilities, fallback by checking if it would report neighbors
+    my $lldp_rem = $lldp->lldp_rem_id() || {};
+    return 1 if scalar keys %$lldp_rem;
+    
     return;
 }
 
@@ -168,10 +174,15 @@ sub lldp_port {
     my %lldp_port;
     foreach my $key ( sort keys %$pid ) {
         my $port = $pdesc->{$key};
+        my $type = $ptype->{$key};
+        if ( $type and $type eq 'interfaceName' ) {
+            # If the pid claims to be an interface name,
+            # believe it.
+            $port = $pid->{$key};
+        }
         unless ($port) {
             $port = $pid->{$key};
             next unless $port;
-            my $type = $ptype->{$key};
             next unless $type;
 
           # May need to format other types in the future, i.e. Network address
@@ -222,6 +233,50 @@ sub lldp_id {
     return \%lldp_id;
 }
 
+sub lldp_platform {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $rid  = $lldp->lldp_rem_id($partial) || {};
+    my $desc = $lldp->lldp_rem_sysdesc($partial) || {};
+    my $name = $lldp->lldp_rem_sysname($partial) || {};
+    
+    my %lldp_platform;
+    foreach my $key (keys %$rid) {
+        $lldp_platform{$key} = $desc->{$key} || $name->{$key};
+    }
+    return \%lldp_platform;
+}
+
+sub lldp_cap {
+    my $lldp     = shift;
+    my $partial = shift;
+
+    my $lldp_caps  = $lldp->lldp_rem_cap_spt($partial)  || {};
+    
+    # Encoded as BITS which Perl Net-SNMP implementation doesn't seem to
+    # be able to enumerate for us, so we have to get it from the MIB
+    # and enumerate ourselves
+    my $oid = SNMP::translateObj('lldpRemSysCapEnabled',0,1) || '';
+    my $enums = ((ref {} eq ref $SNMP::MIB{$oid}{'enums'}) ? $SNMP::MIB{$oid}{'enums'} : {});
+    my %r_enums = reverse %$enums;
+
+    my %lldp_cap;
+    foreach my $key ( keys %$lldp_caps ) {
+        my $cap_bits = $lldp_caps->{$key};
+        next unless $cap_bits;
+        
+        my $count = 0;
+        foreach my $bit (split //,$cap_bits) {
+            if ( $bit ) {
+                push ( @{$lldp_cap{$key}}, $r_enums{$count});
+            }
+            $count++;
+        }
+    }
+    return \%lldp_cap;
+}
+
 #sub root_ip {
 #    my $lldp = shift;
 #
@@ -247,7 +302,7 @@ sub _lldp_addr_index {
     my @oids   = split( /\./, $idx );
     my $index  = join( '.', splice( @oids, 0, 3 ) );
     my $proto  = shift(@oids);
-    my $length = shift(@oids);
+    my $length = shift(@oids) if scalar @oids > 4;
 
     # IPv4
     if ( $proto == 1 ) {
@@ -435,6 +490,17 @@ Currently only returns IPv4 or MAC addresses.
 
 Returns remote port ID
 
+=item $lldp->lldp_platform()
+
+Tries to return something useful from C<lldp_rem_sysdesc()> or
+C<lldp_rem_sysname()>.
+
+=item  $lldp->lldp_cap() 
+
+Returns hash of arrays with each array containing the system capabilities
+supported by the remote system.  Possible elements in the array are
+enumerated from C<LldpSystemCapabilitiesMap>.
+
 =back
 
 =head2 LLDP Remote Table (C<lldpRemTable>)
@@ -498,9 +564,9 @@ Nulls are removed before the value is returned.
 
 =item  $lldp->lldp_rem_sys_cap() 
 
-Returns which system capabilities are enabled on the local system.  Results
-are munged into an ascii binary string, LSB.  Each digit
-represents a bit from the table below:
+Returns which system capabilities are enabled on the remote system.  Results
+are munged into an ascii binary string, LSB.  Each digit represents a bit
+from the table below:
 
 =over
 

Info/Layer1.pm

@@ -41,7 +41,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( %SNMP::Info::MIBS, 'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex' );
 

Info/Layer1/Allied.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, 'root_ip' => 'actualIPAddr', );

Info/Layer1/Asante.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, );

Info/Layer1/Bayhub.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
@@ -334,6 +334,13 @@ sub bp_index {
     return \%bp_index;
 }
 
+sub fw_mac {
+    my $bayhub = shift;
+    my $partial   = shift;
+
+    return $bayhub->SUPER::fw_mac($partial);
+}
+
 sub fw_port {
     my $bayhub  = shift;
     my $partial = shift;

Info/Layer1/Cyclades.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer1::MIBS,

Info/Layer1/S3000.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
@@ -324,6 +324,13 @@ sub bp_index {
     return \%bp_index;
 }
 
+sub fw_mac {
+    my $s3000 = shift;
+    my $partial   = shift;
+
+    return $s3000->SUPER::fw_mac($partial);
+}
+
 sub fw_port {
     my $s3000   = shift;
     my $partial = shift;

Info/Layer2.pm

@@ -45,7 +45,7 @@ use SNMP::Info::PowerEthernet;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,         %SNMP::Info::Bridge::MIBS,
@@ -123,8 +123,11 @@ sub serial {
     # precedence
     #   serial2,chassis parse,serial1
     return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
-    return $1
-        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
+
+    if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i ) {
+        return $1;
+    }
+
     return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
     return;
@@ -155,10 +158,18 @@ sub interfaces {
     my $i_descr    = $l2->i_description($partial) || {};
 
     # Replace the Index with the ifDescr field.
+    # Check for duplicates in ifDescr, if so uniquely identify by adding
+    # ifIndex to repeated values
+    my %seen;
     foreach my $iid ( keys %$i_descr ) {
         my $port = $i_descr->{$iid};
         next unless defined $port;
-        $interfaces->{$iid} = $port;
+        if ( $seen{$port}++ ) {
+            $interfaces->{$iid} = sprintf( "%s (%d)", $port, $iid );
+        }
+        else {
+            $interfaces->{$iid} = $port;
+        }
     }
     return $interfaces;
 }

Info/Layer2/Airespace.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,      %SNMP::Info::Bridge::MIBS,

Info/Layer2/Aironet.pm

@@ -49,7 +49,7 @@ use SNMP::Info::IEEE802dot11;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %GLOBALS = (
     %SNMP::Info::IEEE802dot11::GLOBALS,

Info/Layer2/Allied.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer1;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );
 

Info/Layer2/Baystack.pm

@@ -46,12 +46,13 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::RapidCity::MIBS, %SNMP::Info::NortelStack::MIBS,
     %SNMP::Info::SONMP::MIBS,
+    'BAY-STACK-PETH-EXT-MIB' => 'bspePethPsePortExtMeasuredPower',
 );
 
 %GLOBALS = (
@@ -64,6 +65,7 @@ $VERSION = '3.00_003';
     %SNMP::Info::Layer3::FUNCS,    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::RapidCity::FUNCS, %SNMP::Info::NortelStack::FUNCS,
     %SNMP::Info::SONMP::FUNCS,
+    'peth_port_power' => 'bspePethPsePortExtMeasuredPower',
 );
 
 # 450's report full duplex as speed = 20mbps?!
@@ -139,6 +141,7 @@ sub model {
     $model =~ s/^sreg-//;
     # Strip ES/ERS/BayStack etc. from those families
     $model =~ s/^(E(R)?S|BayStack|Ethernet(Routing)?Switch)-?//;
+    $model =~ s/-ethSwitchNMM//;
 
     return $model;
 }
@@ -393,6 +396,14 @@ my $baystack = new SNMP::Info::Layer2::Baystack(...);
 
 =back
 
+=head2 Required MIBs
+
+=over
+
+=item F<BAY-STACK-PETH-EXT-MIBB>
+
+=back
+
 =head2 Inherited MIBs
 
 See L<SNMP::Info::SONMP/"Required MIBs"> for its MIB requirements.
@@ -509,10 +520,16 @@ revisions of Baystack firmware report all zeros for each port mac.
 Crosses C<ifName> with C<ifAlias> and returns the human set port name if
 exists.
 
-=item $poe->peth_port_ifindex()
+=item $baystack->peth_port_ifindex()
 
 Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 
+=item $baystack->peth_port_power()
+
+Power supplied by PoE ports, in milliwatts
+
+(C<bspePethPsePortExtMeasuredPower>)
+
 =back
 
 =head2 F<ENTITY-MIB> Information

Info/Layer2/C1900.pm

@@ -37,19 +37,23 @@ use Exporter;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
 use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoAgg;
 use SNMP::Info::Layer2;
 
 @SNMP::Info::Layer2::C1900::ISA = qw/SNMP::Info::CDP SNMP::Info::CiscoStats
-    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoStpExtensions SNMP::Info::CiscoAgg SNMP::Info::Layer2
     Exporter/;
 @SNMP::Info::Layer2::C1900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
     %SNMP::Info::CiscoConfig::GLOBALS,
     %SNMP::Info::CiscoStats::GLOBALS,
     %SNMP::Info::CDP::GLOBALS,
@@ -58,6 +62,8 @@ $VERSION = '3.00_003';
 
 %FUNCS = (
     %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
     %SNMP::Info::CiscoConfig::FUNCS,
     %SNMP::Info::CiscoStats::FUNCS,
     %SNMP::Info::CDP::FUNCS,
@@ -75,6 +81,8 @@ $VERSION = '3.00_003';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
     %SNMP::Info::CiscoConfig::MIBS,
     %SNMP::Info::CiscoStats::MIBS,
     %SNMP::Info::CDP::MIBS,
@@ -84,8 +92,9 @@ $VERSION = '3.00_003';
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,             %SNMP::Info::CiscoAgg::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE, %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,         %SNMP::Info::CDP::MUNGE,
 );
 
 sub bulkwalk_no         { return 1; }
@@ -203,7 +212,8 @@ sub i_vlan {
     my $partial = shift;
 
     # Overlap allows more than one VLAN per port.  Unable to determine default
-    my $overlap = $c1900->bridgeGroupAllowMembershipOverlap()
+    my $overlap 
+        = $c1900->bridgeGroupAllowMembershipOverlap()
         || $c1900->vlanAllowMembershipOverlap()
         || 'disabled';
 
@@ -258,7 +268,7 @@ sub bp_index {
     my $if_index = $c1900->i_index($partial);
     my $index = $c1900->orig_bp_index($partial) || {};
     foreach my $iid ( keys %$if_index ) {
-        $index->{$iid} = $iid if(!defined $index->{$iid});
+        $index->{$iid} = $iid if ( !defined $index->{$iid} );
     }
     return $index;
 }
@@ -312,6 +322,10 @@ after determining a more specific class using the method above.
 
 =item SNMP::Info::CiscoConfig
 
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::CiscoAgg
+
 =item SNMP::Info::Layer2
 
 =back
@@ -336,6 +350,10 @@ See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
 
 See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
 
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its MIB requirements.
+
 See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
@@ -394,6 +412,14 @@ See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
 See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoAgg
+
+See L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
 See L<SNMP::Info::Layer2/"GLOBALS"> for details.
@@ -513,6 +539,14 @@ See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
 See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/C2900.pm

@@ -34,33 +34,21 @@ package SNMP::Info::Layer2::C2900;
 
 use strict;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::Layer2;
+use SNMP::Info::Layer2::Cisco;
 
-@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig
-    SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::Layer2::Cisco Exporter/;
 @SNMP::Info::Layer2::C2900::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS, %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::Cisco::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer2::Cisco::FUNCS,
     'i_name' => 'ifAlias',
 
     # C2900PortEntry
@@ -71,15 +59,12 @@ $VERSION = '3.00_003';
 );
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS, 'CISCO-C2900-MIB' => 'ciscoC2900MIB',
+    %SNMP::Info::Layer2::Cisco::MIBS,
+    'CISCO-C2900-MIB' => 'ciscoC2900MIB',
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer2::Cisco::MUNGE,
 );
 
 sub vendor {
@@ -139,6 +124,32 @@ sub i_duplex_admin {
     return \%i_duplex_admin;
 }
 
+sub i_speed_admin {
+    my $c2900   = shift;
+    my $partial = shift;
+
+    my %i_speed_admin;
+    my $p_port        = $c2900->p_port() || {};
+    my $interfaces    = $c2900->interfaces($partial);
+    my $c2900_p_index = $c2900->c2900_p_index() || {};
+
+    my %reverse_2900 = reverse %$c2900_p_index;
+    my $c2900_p_speed
+        = $c2900->c2900_p_speed_admin( $reverse_2900{$partial} );
+
+    my %speeds = (
+        'autoDetect' => 'auto',
+        's10000000'  => '10 Mbps',
+        's100000000' => '100 Mbps',
+    );
+
+    %i_speed_admin
+        = map { $c2900_p_index->{$_} => $speeds{ $c2900_p_speed->{$_} } }
+        keys %$c2900_p_index;
+
+    return \%i_speed_admin;
+}
+
 sub set_i_speed_admin {
     my $c2900 = shift;
     my ( $speed, $iid ) = @_;
@@ -243,15 +254,7 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::Layer2
+=item SNMP::Info::Layer2::Cisco
 
 =back
 
@@ -267,15 +270,7 @@ Part of the v2 MIBs from Cisco.
 
 =head2 Inherited MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
-
-See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+See L<SNMP::Info::Layer2::Cisco/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
 
@@ -295,25 +290,9 @@ Returns 1.  Use vlan indexing.
 
 =back
 
-=head2 Globals imported from SNMP::Info::CiscoVTP
+=head2 Globals imported from SNMP::Info::Layer2::Cisco
 
-See L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See L<SNMP::Info::Layer2/"GLOBALS"> for details.
+See L<SNMP::Info::Layer2::Cisco/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -349,6 +328,10 @@ Returns reference to hash of IIDs to admin duplex setting
 
 Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex_admin()
 
+=item $c2900->i_speed_admin()
+
+Returns reference to hash of IIDs to admin speed setting.
+
 =back
 
 =head2 F<C2900-MIB> Port Entry Table 
@@ -381,25 +364,9 @@ Gives Admin speed of port
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
+=head2 Table Methods imported from SNMP::Info::Layer2::Cisco
 
-See L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+See L<SNMP::Info::Layer2::Cisco/"TABLE METHODS"> for details.
 
 =head1 SET METHODS
 

Info/Layer2/Catalyst.pm

@@ -34,48 +34,34 @@ package SNMP::Info::Layer2::Catalyst;
 use strict;
 use Exporter;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::Layer2;
+use SNMP::Info::Layer2::Cisco;
 
 @SNMP::Info::Layer2::Catalyst::ISA
-    = qw/SNMP::Info::CiscoStack SNMP::Info::CiscoVTP
-    SNMP::Info::CDP SNMP::Info::CiscoStats
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::Layer2 Exporter/;
+    = qw/SNMP::Info::CiscoStack SNMP::Info::Layer2::Cisco Exporter/;
 @SNMP::Info::Layer2::Catalyst::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,   %SNMP::Info::CiscoStack::MIBS,
+    %SNMP::Info::Layer2::Cisco::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::Cisco::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS, %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,   %SNMP::Info::CiscoStack::FUNCS,
+    %SNMP::Info::Layer2::Cisco::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoVTP::MUNGE,   %SNMP::Info::CiscoStack::MUNGE,
+    %SNMP::Info::Layer2::Cisco::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 # Overidden Methods
@@ -228,18 +214,10 @@ after determining a more specific class using the method above.
 
 =over
 
+=item SNMP::Info::Layer2::Cisco
+
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::Layer2
-
 =back
 
 =head2 Required MIBs
@@ -248,19 +226,10 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
+See L<SNMP::Info::Layer2::Cisco/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
-requirements.
-
-See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 These MIBs are found in the standard v2 MIBs from Cisco.
@@ -290,30 +259,14 @@ Returns 1.  Use vlan indexing.
 
 =back
 
+=head2 Global Methods imported from SNMP::Info::Layer2::Cisco
+
+See documentation in L<SNMP::Info::Layer2::Cisco/"GLOBALS"> for details.
+
 =head2 Global Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -348,29 +301,12 @@ have problems with F<BRIDGE-MIB>
 
 =back
 
+=head2 Table Methods imported from SNMP::Info::Layer2::Cisco
+
+See documentation in L<SNMP::Info::Layer2::Cisco/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
-
 =cut

Info/Layer2/Centillion.pm

@@ -43,7 +43,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -246,6 +246,20 @@ sub slot_offset {
     return 0;
 }
 
+sub fw_mac {
+    my $centillion = shift;
+    my $partial   = shift;
+
+    return $centillion->SUPER::fw_mac($partial);
+}
+
+sub fw_port {
+    my $centillion = shift;
+    my $partial   = shift;
+
+    return $centillion->SUPER::fw_port($partial);
+}
+
 1;
 __END__
 

Info/Layer2/Cisco.pm

@@ -35,49 +35,71 @@ use Exporter;
 use SNMP::Info::CiscoVTP;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
 use SNMP::Info::CiscoRTT;
-use SNMP::Info::CiscoQOS;
 use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoAgg;
 use SNMP::Info::Layer2;
 
 @SNMP::Info::Layer2::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    SNMP::Info::CiscoStats SNMP::Info::CiscoRTT
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoStpExtensions SNMP::Info::CiscoAgg
+    SNMP::Info::Layer2
     Exporter/;
 @SNMP::Info::Layer2::Cisco::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
-    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoQOS::MIBS,   %SNMP::Info::CiscoRTT::MIBS,
-    %SNMP::Info::CiscoImage::MIBS, %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,        %SNMP::Info::CiscoVTP::MIBS,
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoRTT::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoQOS::GLOBALS,   %SNMP::Info::CiscoRTT::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,        %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoQOS::FUNCS,   %SNMP::Info::CiscoRTT::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS, %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,        %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoRTT::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoQOS::MUNGE,   %SNMP::Info::CiscoRTT::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE, %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,        %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::CiscoAgg::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoRTT::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoVTP::MUNGE,
 );
 
 1;
@@ -85,8 +107,9 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
-that are not covered in other classes.
+SNMP::Info::Layer2::Cisco - SNMP Interface to L2 Cisco devices that are
+not covered in other classes and the base L2 Cisco class for other device
+specific L2 Cisco classes.
 
 =head1 AUTHOR
 
@@ -110,7 +133,8 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Subclass for Generic Cisco Routers running IOS
+Subclass for Generic Layer 2 Cisco devices and the base L2 Cisco class for
+other device specific L2 Cisco classes.
 
 =head2 Inherited Classes
 
@@ -122,14 +146,16 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::CiscoStats
 
-=item SNMP::Info::CiscoImage
-
 =item SNMP::Info::CiscoRTT
 
-=item SNMP::Info::CiscoQOS
-
 =item SNMP::Info::CiscoConfig
 
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::CiscoAgg
+
 =item SNMP::Info::Layer2
 
 =back
@@ -142,18 +168,20 @@ Subclass for Generic Cisco Routers running IOS
 
 See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
 
 =back
@@ -182,22 +210,26 @@ See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoConfig
 
 See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
@@ -219,22 +251,26 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoQOS
-
-See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoConfig
 
 See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

Info/Layer2/CiscoSB.pm

@@ -0,0 +1,264 @@
+# SNMP::Info::Layer2::CiscoSB
+# $Id$
+#
+# Copyright (c) 2013 Nic Bernstein
+#
+# Copyright (c) 2008-2009 Max Baker changes from version 0.8 and beyond.
+#
+# Copyright (c) 2003 Regents of the University of California
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::CiscoSB;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+use SNMP::Info::Entity;
+use SNMP::Info::EtherLike;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CDP;
+
+@SNMP::Info::Layer2::CiscoSB::ISA
+    = qw/SNMP::Info::Layer2 SNMP::Info::Entity SNMP::Info::EtherLike
+    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::CiscoSB::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.16';
+
+# This will be filled in with the device's index into the EntPhysicalEntry
+# table by the serial() function.
+our $index = undef;
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+    %SNMP::Info::EtherLike::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    'descr'  => 'sysDescr'
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::Entity::FUNCS,
+    %SNMP::Info::EtherLike::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+);
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::Entity::MIBS,
+    %SNMP::Info::EtherLike::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CDP::MIBS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+    %SNMP::Info::EtherLike::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+);
+
+
+sub vendor {
+    return 'cisco';
+}
+
+# Walk the entPhysicalSerialNum table and return the first serial found
+sub serial {
+    my $ciscosb  = shift;
+    my $e_serial = $ciscosb->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
+
+sub os_ver {
+    my $ciscosb = shift;
+    my $os_ver  = $ciscosb->e_swver();
+
+    return $os_ver->{$index} if defined $index;
+}
+  
+# Grab e_model from Entity and tag on e_hwver
+sub model {
+    my $ciscosb = shift;
+    my $e_model   = $ciscosb->e_model();
+    my $e_hwver = $ciscosb->e_hwver();
+
+    if (defined ($index)) {
+        my $model = "$e_model->{$index} $e_hwver->{$index}";
+        return $model;
+    }
+    return $ciscosb->description();
+}
+
+# ifDescr is the same for all interfaces in a class, but the ifName is
+# unique, so let's use that for port name.
+sub interfaces {
+    my $ciscosb = shift;
+    my $partial = shift;
+
+    my $interfaces = $ciscosb->i_name($partial);
+
+    return $interfaces;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::CiscoSB - SNMP Interface to Cisco Small Business series
+
+=head1 AUTHOR
+
+Nic Bernstein (shamelessly stolen from Max Baker's Aironet code)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ciscosb = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $ciscosb->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides interface to SNMP Data available on Cisco Small Business (nee LinkSys)
+managed switches. [i.e. those matching enterprises(1).cisco(9).otherEnterprises(6).ciscosb(1)]
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=item SNMP::Info::Entity
+
+=item SNMP::Info::EtherLike
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoConfig
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes
+
+MIBs required by the inherited classes listed above.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ciscosb->vendor()
+
+Returns 'cisco'
+
+=item $ciscosb->os_ver()
+
+Returns software version (C<entPhysicalSoftwareRev>)
+
+=item $ciscosb->serial()
+
+Returns serial number of unit (C<entPhysicalSerialNum>)
+
+=item $ciscosb->model()
+
+Returns model and hardware revision of unit
+(C<entPhysicalModelName+entPhysicalHardwareRev>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::EtherLike
+
+See documentation in L<SNMP::Info::EtherLike/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+=head2 Overrides
+
+=over
+
+=item $ciscosb->interfaces()
+
+Uses the i_name() field.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::EtherLike
+
+See documentation in L<SNMP::Info::EtherLike/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/HP.pm

@@ -38,21 +38,28 @@ use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
 use SNMP::Info::LLDP;
 use SNMP::Info::CDP;
+use SNMP::Info::Aggregate;
 
-@SNMP::Info::Layer2::HP::ISA
-    = qw/SNMP::Info::Layer3 SNMP::Info::MAU SNMP::Info::LLDP
-    SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::HP::ISA = qw/
+    SNMP::Info::Aggregate
+    SNMP::Info::Layer3 
+    SNMP::Info::MAU 
+    SNMP::Info::LLDP
+    SNMP::Info::CDP 
+    Exporter
+/;
 @SNMP::Info::Layer2::HP::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
     %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::Aggregate::MIBS,
     'RFC1271-MIB'    => 'logDescription',
     'HP-ICF-OID'     => 'hpSwitch4000',
     'STATISTICS-MIB' => 'hpSwitchCpuStat',
@@ -69,6 +76,7 @@ $VERSION = '3.00_003';
     %SNMP::Info::MAU::GLOBALS,
     %SNMP::Info::LLDP::GLOBALS,
     %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::Aggregate::GLOBALS,
     'serial1'      => 'entPhysicalSerialNum.1',
     'serial2'      => 'hpHttpMgSerialNumber.0',
     'hp_cpu'       => 'hpSwitchCpuStat.0',
@@ -87,6 +95,7 @@ $VERSION = '3.00_003';
     %SNMP::Info::MAU::FUNCS,
     %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::Aggregate::FUNCS,
     'i_type2'   => 'ifType',
 
     # RFC1271
@@ -112,6 +121,7 @@ $VERSION = '3.00_003';
     %SNMP::Info::MAU::MUNGE,
     %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::Aggregate::MUNGE,
     'c_id'   => \&munge_hp_c_id,
 );
 
@@ -167,6 +177,10 @@ $VERSION = '3.00_003';
     'J4905A' => '3400cl-24G',
     'J4815A' => '3324XL',
     'J4851A' => '3124',
+    'J9729A' => '2920-48G-PoE+',
+    'J9728A' => '2920-48G',
+    'J9727A' => '2920-24G-PoE+',
+    'J9726A' => '2920-24G',
     'J9562A' => '2915-8G-PoE',
     'J9148A' => '2910al-48G-PoE+',
     'J9147A' => '2910al-48G',
@@ -178,26 +192,30 @@ $VERSION = '3.00_003';
     'J4903A' => '2824',
     'J9022A' => '2810-48G',
     'J9021A' => '2810-24G',
+    'J4899C' => '2650C',
     'J8165A' => '2650-PWR',
     'J4899B' => '2650-CR',
-    'J4899C' => '2650C',
     'J4899A' => '2650',
+    'J4900C' => '2626C',
     'J8164A' => '2626-PWR',
     'J4900B' => '2626-CR',
-    'J4900C' => '2626C',
     'J4900A' => '2626',
     'J9627A' => '2620-48-PoE+',
-    'J9624A' => '2620-48',
-    'J9624A' => '2620-24-PPoE+',
+    'J9626A' => '2620-48',
     'J9625A' => '2620-24-PoE+',
+    'J9624A' => '2620-24-PPoE+',
     'J9623A' => '2620-24',
     'J9565A' => '2615-8-PoE',
     'J9089A' => '2610-48-PWR',
     'J9088A' => '2610-48',
-    'J9087A' => '2610-24-PWR',
     'J9086A' => '2610-24/12PWR',
+    'J9087A' => '2610-24-PWR',
     'J9085A' => '2610-24',
     'J8762A' => '2600-8-PWR',
+    'J9772A' => '2530-48G-PoE+',
+    'J9775A' => '2530-48G',
+    'J9773A' => '2530-24G-PoE+',
+    'J9776A' => '2530-24G',
     'J4813A' => '2524',
     'J9298A' => '2520G-8-PoE',
     'J9299A' => '2520G-24-PoE',
@@ -516,6 +534,32 @@ sub set_i_vlan_tagged {
     return;
 }
 
+sub agg_ports { return agg_ports_ifstack(@_) }
+
+sub qb_fw_vlan {
+    my $hp = shift;
+    my $partial = shift;
+    my $qb_fw_vlan = $hp->SUPER::qb_fw_vlan($partial);
+
+    my $fdb_to_dot1q = {};
+    my $fdb_id = $hp->dot1qVlanFdbId(0);
+    foreach my $fdb_entry (keys %$fdb_id) {
+        my ($timemark, $vlan_id) = split(/\./, $fdb_entry);
+        $fdb_to_dot1q->{$fdb_id->{$fdb_entry}} = $vlan_id;
+    }
+    foreach my $learn (keys %$qb_fw_vlan) {
+        my $fdb_idx = $qb_fw_vlan->{$learn};
+        if (exists $fdb_to_dot1q->{$fdb_idx}) {
+            $qb_fw_vlan->{$learn} = $fdb_to_dot1q->{$fdb_idx}; 
+        }
+    }
+
+    return $qb_fw_vlan;
+}
+
+
+
+
 1;
 __END__
 
@@ -702,7 +746,7 @@ number and the common model number with this map :
     'J4900C' => '2626C',
     'J4900A' => '2626',
     'J9627A' => '2620-48-PoE+',
-    'J9624A' => '2620-48',
+    'J9626A' => '2620-48',
     'J9624A' => '2620-24-PPoE+',
     'J9625A' => '2620-24-PoE+',
     'J9623A' => '2620-24',
@@ -783,6 +827,12 @@ Power supplied by PoE ports, in milliwatts
 Returns what version of STP the device is running.
 (C<hpicfBridgeRstpForceVersion> with fallback to inherited stp_ver())
 
+=item $hp->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
+(C<dot1qFdbId>), (C<rcBridgeTpFdbVlanId>)
+
 =back
 
 =head2 Globals imported from SNMP::Info::Layer2
@@ -804,7 +854,7 @@ to a hash.
 
 =head2 Overrides
 
-=over
+=over 4
 
 =item $hp->interfaces() 
 
@@ -832,6 +882,12 @@ Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()
 Returns reference to hash of power Ethernet port table entries map back to
 interface index (c<ifIndex>)
 
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer2
@@ -869,4 +925,6 @@ operations.
 
 =item set_i_vlan_tagged()
 
+=back
+
 =cut

Info/Layer2/HP4000.pm

@@ -44,7 +44,7 @@ use SNMP::Info::CDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -719,4 +719,6 @@ operations.
 
 =item set_i_vlan_tagged()
 
+=back
+
 =cut

Info/Layer2/HPVC.pm

@@ -33,17 +33,19 @@ package SNMP::Info::Layer2::HPVC;
 use strict;
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::LLDP;
 
 @SNMP::Info::Layer2::HPVC::ISA
-    = qw/SNMP::Info::Layer2 Exporter/;
+    = qw/SNMP::Info::Layer2 SNMP::Info::LLDP Exporter/;
 @SNMP::Info::Layer2::HPVC::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     'HPVC-MIB'       => 'vcDomainName',
     'CPQSINFO-MIB'   => 'cpqSiSysSerialNum',
     'HPVCMODULE-MIB' => 'vcModuleDomainName',
@@ -51,6 +53,7 @@ $VERSION = '3.00_003';
 
 %GLOBALS = (
     %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
     'serial1'      => 'cpqSiSysSerialNum.0',
     'os_ver'       => 'cpqHoSWRunningVersion.1',
     'os_bin'       => 'cpqHoFwVerVersion.1',
@@ -59,12 +62,14 @@ $VERSION = '3.00_003';
 
 %FUNCS = (
     %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
     
 );
 
 %MUNGE = (
     # Inherit all the built in munging
     %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
 );
 
 

Info/Layer2/Kentrox.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/N2270.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Airespace;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,        %SNMP::Info::Bridge::MIBS,

Info/Layer2/NAP222x.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::IEEE802dot11::MIBS,

Info/Layer2/NWSS2300.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Bridge;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,

Info/Layer2/Netgear.pm

@@ -33,26 +33,32 @@ package SNMP::Info::Layer2::Netgear;
 use strict;
 use Exporter;
 use SNMP::Info::Layer2;
+use SNMP::Info::Entity;
 use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Entity SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::Netgear::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
-%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::LLDP::MIBS, );
+# This will be filled in with the device's index into the EntPhysicalEntry
+# table by the serial() function.
+our $index = undef;
+
+%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::Entity::MIBS, %SNMP::Info::LLDP::MIBS, );
 
 %GLOBALS = (
-    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
-    ng_serial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
-    ng_osver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::Entity::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
+    ng_fsosver   => '.1.3.6.1.4.1.4526.11.11.1.0',
+    ng_gsmserial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
+    ng_gsmosver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
 );
 
-%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::LLDP::FUNCS, );
+%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::Entity::FUNCS, %SNMP::Info::LLDP::FUNCS, );
 
-%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::Entity::MUNGE, %SNMP::Info::LLDP::MUNGE, );
 
 sub vendor {
     return 'netgear';
@@ -62,47 +68,216 @@ sub os {
     return 'netgear';
 }
 
-# Wish the OID-based method worked, but netgear scatters
-# the sysObjectID values across all the device MIBs, and
-# makes the device MIBs state secrets.
-# They seem to set sysDescr to the model number, though,
-# so we'll use that.
+# We will attempt to use Entity-MIB if present.  In that case, we will
+# also set the shared variable $index, which is used by other functions
+# to index within Entity-MIB tables. This assumes, of course, that there
+# is only one serial number (entPhysicalSerialNum) present in the table.
+sub serial {
+    my $netgear = shift;
+    my $serial = undef;
+    
+    my $e_serial = $netgear->e_serial();
+    if (defined($e_serial)) { # This unit sports the Entity-MIB
+        # Find entity table entry for this unit
+        foreach my $e ( keys %$e_serial ) {
+            if (defined ($e_serial->{$e}) and $e_serial->{$e} !~ /^\s*$/) {
+                $index = $e;
+                last;
+            }
+        }
+        return $e_serial->{$index} if defined $index;
+    }
+
+    # Without Enitity-MIB, we've got to work our way through a bunch of
+    # different locales...
+    return $netgear->ng_gsmserial() if defined $netgear->model and $netgear->model =~ m/GSM\d/i;;
+    return 'none';
+}
+
+# If device supports Entity-MIB, index into that to divine model and
+# hardware version, otherwise default to sysDescr.
 sub model {
     my $netgear = shift;
+    if (defined($index)) {
+        my $model   = $netgear->e_descr();
+        my $e_hwver = $netgear->e_hwver();
+
+        $model = "$model->{$index} $e_hwver->{$index}";
+        return $model;
+    }
     return $netgear->description();
 }
 
-#
-# This is model-dependent.  Some netgear brand devices don't implement
-# the bridge MIB forwarding table, so we use the Q-BRIDGE-MIB forwarding
-# table.  Fall back to the orig functions if the qb versions don't
-# return anything.
-sub fw_mac {
+# ifDescr is the same for all interfaces in a class, but the ifName is
+# unique, so let's use that for port name.  If all else fails, 
+# concatentate ifDesc and ifIndex.
+sub interfaces {
     my $netgear = shift;
-    my $ret     = $netgear->qb_fw_mac();
-    $ret = $netgear->orig_fw_mac() if ( !defined($ret) );
-    return $ret;
-}
+    my $partial = shift;
 
-sub fw_port {
-    my $netgear = shift;
-    my $ret     = $netgear->qb_fw_port();
-    $ret = $netgear->orig_fw_port() if ( !defined($ret) );
-    return $ret;
+    my $interfaces = $netgear->i_index($partial)       || {};
+    my $i_descr    = $netgear->i_description($partial) || {};
+    my $i_name     = $netgear->i_name($partial);
+    my $i_isset    = ();
+    # Replace the description with the ifName field, if set
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        if (defined $name and $name !~ /^\s*$/) {
+            $interfaces->{$iid} = $name;
+            $i_isset->{$iid} = 1;
+        }
+    }
+    # Replace the Index with the ifDescr field, appended with index
+    # number, to deal with devices with non-unique ifDescr.
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid} . '-' . $iid;
+        next unless defined $port;
+        next if (defined $i_isset->{$iid} and $i_isset->{$iid} == 1);
+        $interfaces->{$iid} = $port;
+    }
+
+    return $interfaces;
 }
 
 # these seem to work for GSM models but not GS
 # https://sourceforge.net/tracker/?func=detail&aid=3085413&group_id=70362&atid=527529
 sub os_ver {
-    my $self = shift;
-    return if $self->model and $self->model =~ m/GS\d/i;
-    return $self->ng_osver();
+    my $netgear = shift;
+    my $serial  = $netgear->serial(); # Make sure that index gets primed
+    if (defined($index)) {
+        my $os_ver  = $netgear->e_swver();
+        return $os_ver->{$index} if defined $os_ver;
+    }
+    return $netgear->ng_gsmosver() if defined  $netgear->model and $netgear->model =~ m/GSM\d/i;
+    return $netgear->ng_fsosver() if defined  $netgear->model and $netgear->model =~ m/FS\d/i;
 }
 
-sub serial {
-    my $self = shift;
-    return if $self->model and $self->model =~ m/GS\d/i;
-    return $self->ng_serial();
+#  Use LLDP
+
+sub hasCDP {
+    my $netgear = shift;
+    return $netgear->hasLLDP() || $netgear->SUPER::hasCDP();
+}
+
+sub c_ip {
+    my $netgear = shift;
+    my $partial = shift;
+
+    my $cdp  = $netgear->SUPER::c_ip($partial) || {};
+    my $lldp = $netgear->lldp_ip($partial)     || {};
+
+    my %c_ip;
+    foreach my $iid ( keys %$cdp ) {
+        my $ip = $cdp->{$iid};
+        next unless defined $ip;
+
+        $c_ip{$iid} = $ip;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $ip = $lldp->{$iid};
+        next unless defined $ip;
+
+        $c_ip{$iid} = $ip;
+    }
+    return \%c_ip;
+}
+
+sub c_if {
+    my $netgear = shift;
+    my $partial  = shift;
+
+    my $lldp = $netgear->lldp_if($partial)     || {};
+    my $cdp  = $netgear->SUPER::c_if($partial) || {};
+
+    my %c_if;
+    foreach my $iid ( keys %$cdp ) {
+        my $if = $cdp->{$iid};
+        next unless defined $if;
+
+        $c_if{$iid} = $if;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $if = $lldp->{$iid};
+        next unless defined $if;
+
+        $c_if{$iid} = $if;
+    }
+    return \%c_if;
+}
+
+sub c_port {
+    my $netgear = shift;
+    my $partial  = shift;
+
+    my $lldp = $netgear->lldp_port($partial)     || {};
+    my $cdp  = $netgear->SUPER::c_port($partial) || {};
+
+    my %c_port;
+    foreach my $iid ( keys %$cdp ) {
+        my $port = $cdp->{$iid};
+        next unless defined $port;
+
+        $c_port{$iid} = $port;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $port = $lldp->{$iid};
+        next unless defined $port;
+
+        $c_port{$iid} = $port;
+    }
+    return \%c_port;
+}
+
+sub c_id {
+    my $netgear = shift;
+    my $partial  = shift;
+
+    my $lldp = $netgear->lldp_id($partial)     || {};
+    my $cdp  = $netgear->SUPER::c_id($partial) || {};
+
+    my %c_id;
+    foreach my $iid ( keys %$cdp ) {
+        my $id = $cdp->{$iid};
+        next unless defined $id;
+
+        $c_id{$iid} = $id;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $id = $lldp->{$iid};
+        next unless defined $id;
+
+        $c_id{$iid} = $id;
+    }
+    return \%c_id;
+}
+
+sub c_platform {
+    my $netgear = shift;
+    my $partial  = shift;
+
+    my $lldp = $netgear->lldp_rem_sysdesc($partial)  || {};
+    my $cdp  = $netgear->SUPER::c_platform($partial) || {};
+
+    my %c_platform;
+    foreach my $iid ( keys %$cdp ) {
+        my $platform = $cdp->{$iid};
+        next unless defined $platform;
+
+        $c_platform{$iid} = $platform;
+    }
+
+    foreach my $iid ( keys %$lldp ) {
+        my $platform = $lldp->{$iid};
+        next unless defined $platform;
+
+        $c_platform{$iid} = $platform;
+    }
+    return \%c_platform;
 }
 
 1;
@@ -145,6 +320,7 @@ inherited methods.
 =over
 
 =item SNMP::Info::Layer2
+=item SNMP::Info::Entity
 =item SNMP::Info::LLDP
 
 =back
@@ -158,6 +334,8 @@ inherited methods.
 MIBs listed in L<SNMP::Info::Layer2/"Required MIBs"> and its inherited
 classes.
 
+See L<SNMP::Info::Entity/"Required MIBs"> for its MIB requirements.
+
 See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
 
 =back
@@ -180,7 +358,8 @@ Returns 'netgear'
 
 =item $netgear->model()
 
-Returns description()
+Returns concatenation of $e_model and $e_hwver if Entity MIB present, 
+otherwise returns description()
 
 =item $netgear->os_ver()
 
@@ -188,7 +367,8 @@ Returns OS Version.
 
 =item $netgear->serial()
 
-Returns Serial Number.
+Returns Serial Number if available (older FS switches have no accessible
+serial number).
 
 =back
 
@@ -196,6 +376,10 @@ Returns Serial Number.
 
 See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::LLDP
 
 See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
@@ -209,22 +393,52 @@ a reference to a hash.
 
 =over
 
-=item $netgear->fw_mac()
+=item $netgear->interfaces()
 
-Returns reference to hash of forwarding table MAC Addresses.
+Uses the i_name() field.
 
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
+=back
 
-=item $netgear->fw_port()
+=head2 Topology information
 
-Returns reference to hash of forwarding table entries port interface
-identifier (iid)
+Based upon the software version devices may support Link Layer Discovery 
+Protocol (LLDP).
 
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
+=over
+
+=item $netgear->hasCDP()
+
+Returns true if the device is running LLDP.
+
+=item $netgear->c_if()
+
+Returns reference to hash.  Key: iid Value: local device port (interfaces)
+
+=item $netgear->c_ip()
+
+Returns reference to hash.  Key: iid Value: remote IPv4 address
+
+If multiple entries exist with the same local port, c_if(), with the same IPv4
+address, c_ip(), it may be a duplicate entry.
+
+If multiple entries exist with the same local port, c_if(), with different
+IPv4 addresses, c_ip(), there is either a non-LLDP device in between two or
+more devices or multiple devices which are not directly connected.  
+
+Use the data from the Layer2 Topology Table below to dig deeper.
+
+=item $netgear->c_port()
+
+Returns reference to hash. Key: iid Value: remote port (interfaces)
+
+=item $netgear->c_id()
+
+Returns reference to hash. Key: iid Value: string value used to identify the
+chassis component associated with the remote system.
+
+=item $netgear->c_platform()
+
+Returns reference to hash.  Key: iid Value: Remote Device Type
 
 =back
 
@@ -232,6 +446,10 @@ C<Q-BRIDGE-MIB> doesn't return anything.
 
 See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::LLDP
 
 See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.

Info/Layer2/Orinoco.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS,

Info/Layer2/Trapeze.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,

Info/Layer2/ZyXEL_DSLAM.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer2;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # Set for No CDP
 %GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );

Info/Layer3.pm

@@ -51,7 +51,7 @@ use SNMP::Info::AdslLine;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -132,11 +132,11 @@ $VERSION = '3.00_003';
     'bgp_peer_out_upd'        => 'bgpPeerOutUpdates',
 
     # IP-MIB Net to Physical Table (ARP Cache)
-    'n2p_paddr' => 'ipNetToPhysicalPhysAddress',
+    'n2p_paddr'      => 'ipNetToPhysicalPhysAddress',
     'n2p_lastupdate' => 'ipNetToPhysicalLastUpdated',
-    'n2p_ptype' => 'ipNetToPhysicalType',
-    'n2p_pstate' => 'ipNetToPhysicalState',
-    'n2p_pstatus' => 'ipNetToPhysicalRowStatus',
+    'n2p_ptype'      => 'ipNetToPhysicalType',
+    'n2p_pstate'     => 'ipNetToPhysicalState',
+    'n2p_pstatus'    => 'ipNetToPhysicalRowStatus',
 
 );
 
@@ -152,7 +152,7 @@ $VERSION = '3.00_003';
     %SNMP::Info::IPv6::MUNGE,
     'old_at_paddr' => \&SNMP::Info::munge_mac,
     'at_paddr'     => \&SNMP::Info::munge_mac,
-    'n2p_paddr' => \&SNMP::Info::munge_mac,
+    'n2p_paddr'    => \&SNMP::Info::munge_mac,
 );
 
 # Method OverRides
@@ -163,12 +163,12 @@ sub root_ip {
     my $router_ip = $l3->router_ip();
     my $ospf_ip   = $l3->ospf_ip();
 
-    # if the router ip exists and is a route advertised by the device we prefer
-    # it over the others
+   # if the router ip exists and is a route advertised by the device we prefer
+   # it over the others
     return $router_ip
         if (( defined $router_ip )
         and ( $router_ip ne '0.0.0.0' )
-        and ( grep { $ospf_ip->{$_} eq $router_ip } (keys %$ospf_ip))
+        and ( grep { $ospf_ip->{$_} eq $router_ip } ( keys %$ospf_ip ) )
         and ( $l3->snmp_connect_ip($router_ip) ) );
 
     # return the first one found here (should be only one)
@@ -205,18 +205,26 @@ sub i_ignore {
 sub serial {
     my $l3 = shift;
 
-    my $serial1  = $l3->serial1();
-    my $e_descr  = $l3->e_descr() || {};
-    my $e_serial = $l3->e_serial() || {};
+    my $serial1 = $l3->serial1();
+    my $e_parent = $l3->e_parent() || {};
 
-    my $serial2 = $e_serial->{1} || undef;
-    my $chassis = $e_descr->{1}  || undef;
+    foreach my $iid ( keys %$e_parent ) {
+        my $parent = $e_parent->{$iid};
+        if ( $parent eq '0' ) {
+            my $serial = $l3->e_serial($iid);
+            if ( $serial ) {
+                return $serial->{$iid};
+            }
+            else {
+                my $descr = $l3->e_descr($iid);
+                if ( $descr and $descr =~ /serial#?:\s*([a-z0-9]+)/i )
+                {
+                    return $1;
+                }
+            }
+        }
+    }
 
-    # precedence
-    #   serial2,chassis parse,serial1
-    return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
-    return $1
-        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
     return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
     return;
@@ -293,30 +301,35 @@ sub interfaces {
     my $l3      = shift;
     my $partial = shift;
 
-    my $interfaces   = $l3->i_index($partial);
-    my $descriptions = $l3->i_description($partial);
+    my $interfaces = $l3->i_index($partial);
+    my $i_descr    = $l3->i_description($partial);
 
-    my %interfaces = ();
-    foreach my $iid ( keys %$interfaces ) {
-        my $desc = $descriptions->{$iid};
-        next unless defined $desc;
-
-        $interfaces{$iid} = $desc;
+    # Check for duplicates in ifDescr, if so uniquely identify by adding
+    # ifIndex to repeated values
+    my %seen;
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid};
+        next unless defined $port;
+        if ( $seen{$port}++ ) {
+            $interfaces->{$iid} = sprintf( "%s (%d)", $port, $iid );
+        }
+        else {
+            $interfaces->{$iid} = $port;
+        }
     }
-
-    return \%interfaces;
+    return $interfaces;
 }
 
 sub vendor {
     my $l3 = shift;
 
     my $descr = $l3->description();
-    my $id = $l3->id();
+    my $id    = $l3->id();
 
     # .1.3.6.1.4.1.9.1 is the CISCO-PRODUCTS-MIB
     # .1.3.6.1.4.1.9.9.368.4 is an old tree that Cisco CSSs were numbered from
-    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
-    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
+    return 'cisco' if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
+    return 'cisco' if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
     return 'cisco'   if ( $descr =~ /(cisco|\bios\b)/i );
     return 'brocade' if ( $descr =~ /foundry/i );
 

Info/Layer3/Aironet.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/AlcatelLucent.pm

@@ -49,7 +49,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -198,21 +198,6 @@ sub interfaces {
     return $alu->orig_i_name($partial);
 }
 
-# Use Q-BRIDGE-MIB
-sub fw_mac {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $alu     = shift;
-    my $partial = shift;
-
-    return $alu->qb_fw_port($partial);
-}
-
 # Work around buggy bp_index in 6.3.1.871.R01 and 6.3.1.975.R01
 sub bp_index {
     my $alu     = shift;
@@ -445,14 +430,6 @@ to a hash.
 Returns interface name from C<ifName>, since the default return value
 of C<ifDescr> includes the OS version.
 
-=item $alu->fw_mac()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $alu->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
 =item $alu->bp_index()
 
 Work around various bugs in the F<BRIDGE-MIB> and

Info/Layer3/AlteonAD.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Altiga.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3;
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE 
             $int_include_vpn $fake_idx $type_class/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
             %SNMP::Info::Layer3::MIBS,

Info/Layer3/Arista.pm

@@ -36,19 +36,25 @@ use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::MAU;
 use SNMP::Info::LLDP;
+use SNMP::Info::Aggregate;
 
-@SNMP::Info::Layer3::Arista::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Arista::ISA = qw/
+    SNMP::Info::Aggregate
+    SNMP::Info::LLDP
+    SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter
+/;
 @SNMP::Info::Layer3::Arista::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
     %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::Aggregate::MIBS,
     'ARISTA-PRODUCTS-MIB' => 'aristaProducts',
 );
 
@@ -104,21 +110,28 @@ sub model {
     return $model;
 }
 
-# Use Q-BRIDGE-MIB
-
-sub fw_mac {
+# The LLDP MIB leaves it up in the air what the index means.
+# On EOS, it's a dot1d port.
+sub lldp_if {
     my $arista  = shift;
     my $partial = shift;
 
-    return $arista->qb_fw_mac($partial);
+    # We pick a column that someone else is likely to want,
+    # so that the cache means that hopefully this doesn't
+    # cause any more SNMP transactions in total.
+    my $desc     = $arista->lldp_rem_desc($partial) || {};
+    my $bp_index = $arista->bp_index() || {};
+
+    my $lldp_if = {};
+    foreach my $key ( keys %$desc ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        $lldp_if->{$key} = $bp_index->{$port};
+    }
+    return $lldp_if;
 }
 
-sub fw_port {
-    my $arista  = shift;
-    my $partial = shift;
-
-    return $arista->qb_fw_port($partial);
-}
+sub agg_ports { return agg_ports_ifstack(@_) }
 
 1;
 __END__
@@ -155,6 +168,8 @@ Subclass for Arista Networks EOS-based devices
 
 =over
 
+=item SNMP::Info::Aggregate
+
 =item SNMP::Info::Layer3
 
 =item SNMP::Info::MAU
@@ -173,6 +188,8 @@ Subclass for Arista Networks EOS-based devices
 
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::Aggregate/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
@@ -224,14 +241,6 @@ to a hash.
 
 =over
 
-=item $arista->fw_mac()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $arista->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
 =item $arista->i_duplex_admin()
 
 Returns info from F<MAU-MIB>
@@ -240,6 +249,16 @@ Returns info from F<MAU-MIB>
 
 Returns info from F<MAU-MIB>
 
+=item $arista->lldp_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item C<agg_ports>
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3

Info/Layer3/BayRS.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Bridge;
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE %MODEL_MAP
     %MODID_MAP %PROCID_MAP/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,
@@ -1635,11 +1635,11 @@ See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =over
 
-=item $extreme->munge_hw_rev()
+=item $bayrs->munge_hw_rev()
 
 Converts octets to a decimal major.minor string.
 
-=item $extreme->munge_wf_serial()
+=item $bayrs->munge_wf_serial()
 
 Coverts octets to a decimal string.
 

Info/Layer3/BlueCoatSG.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,

Info/Layer3/C3550.pm

@@ -32,39 +32,22 @@
 package SNMP::Info::Layer3::C3550;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::Layer3::CiscoSwitch;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::C3550::ISA = qw/
-    SNMP::Info::CiscoVTP
-    SNMP::Info::CiscoStpExtensions
     SNMP::Info::CiscoStack
-    SNMP::Info::LLDP
-    SNMP::Info::CDP
-    SNMP::Info::CiscoStats
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
+    SNMP::Info::Layer3::CiscoSwitch
     Exporter/;
 
 @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -72,46 +55,23 @@ $VERSION = '3.00_003';
 #       So we want CiscoVTP to come last to get the right one.
 # The @ISA order should match these orders.
 
-%MIBS = (
-    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::LLDP::MIBS,               %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,
-);
-
+%MIBS
+    = ( %SNMP::Info::Layer3::CiscoSwitch::MIBS, %SNMP::Info::CiscoStack::MIBS,
+    );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,               %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,               %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,
+    %SNMP::Info::Layer3::CiscoSwitch::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 sub vendor {
@@ -232,10 +192,6 @@ sub set_i_duplex_admin {
     }
 }
 
-sub cisco_comm_indexing {
-    return 1;
-}
-
 1;
 __END__
 
@@ -281,25 +237,9 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoSTPExtensions
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoVTP
-
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CDP
-
-=item SNMP::Info::LLDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =back
 
@@ -309,26 +249,10 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
-requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
+requirements.
 
 =back
 
@@ -353,51 +277,15 @@ Will take the translated model number and try to format it better.
 
 Tries to cull the number of ports from the model number.
 
-=item $c3550->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStack
+=head2 Globals imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -444,45 +332,13 @@ Crosses $c3550->p_port() with $c3550->p_duplex() to utilize port C<ifIndex>.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
-details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
+details.
 
 =cut

Info/Layer3/C4000.pm

@@ -31,48 +31,30 @@
 package SNMP::Info::Layer3::C4000;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::CiscoVTP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
+use SNMP::Info::Layer3::CiscoSwitch;
 use SNMP::Info::MAU;
-use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::C4000::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig SNMP::Info::MAU
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::C4000::ISA = qw/
+    SNMP::Info::Layer3::CiscoSwitch
+    SNMP::Info::MAU
+    Exporter/;
 @SNMP::Info::Layer3::C4000::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::MAU::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::CiscoVTP::MIBS,
+    %SNMP::Info::Layer3::CiscoSwitch::MIBS,
     'CISCO-ENVMON-MIB' => 'ciscoEnvMonMIB',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::MAU::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     'ps1_type'   => 'ciscoEnvMonSupplyStatusDescr.1',
     'ps1_status' => 'ciscoEnvMonSupplyState.1',
     'ps2_type'   => 'ciscoEnvMonSupplyStatusDescr.2',
@@ -80,24 +62,14 @@ $VERSION = '3.00_003';
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,
     %SNMP::Info::MAU::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::CiscoVTP::FUNCS,
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
     'fan_state' => 'ciscoEnvMonFanState',
     'fan_descr' => 'ciscoEnvMonFanStatusDescr',
 );
 
-%MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,      %SNMP::Info::MAU::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE, %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,  %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,         %SNMP::Info::CiscoVTP::MUNGE,
-);
+%MUNGE
+    = ( %SNMP::Info::MAU::MUNGE, %SNMP::Info::Layer3::CiscoSwitch::MUNGE, );
 
 # Override Inheritance for these specific methods
 # use MAU-MIB for admin. duplex and admin. speed
@@ -106,6 +78,11 @@ $VERSION = '3.00_003';
 *SNMP::Info::Layer3::C4000::i_speed_admin
     = \&SNMP::Info::MAU::mau_i_speed_admin;
 
+*SNMP::Info::Layer3::C4000::set_i_duplex_admin
+    = \&SNMP::Info::MAU::mau_set_i_duplex_admin;
+*SNMP::Info::Layer3::C4000::set_i_speed_admin
+    = \&SNMP::Info::MAU::mau_set_i_speed_admin;
+
 sub fan {
     my $c4000     = shift;
     my $fan_state = $c4000->fan_state();
@@ -120,8 +97,6 @@ sub fan {
     return $ret;
 }
 
-sub cisco_comm_indexing { return 1; }
-
 1;
 __END__
 
@@ -163,22 +138,10 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =item SNMP::Info::MAU
 
-=item SNMP::Info::Layer3
-
 =back
 
 =head2 Required MIBs
@@ -187,23 +150,11 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 =head1 GLOBALS
@@ -214,48 +165,20 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $c4000->cisco_comm_indexing()
-
-Returns 1.  Use vlan indexing.
-
 =item $c4000->fan()
 
 Returns fan status
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
@@ -281,39 +204,27 @@ Returns either (auto,full,half).
 
 Returns administrative speed for interfaces.
 
+=item $c4000->set_i_speed_admin(speed, ifIndex)
+
+Sets port speed, must be supplied with speed and port C<ifIndex>.
+
+Speed choices are '10', '100', '1000', 'auto'.
+
+=item $c4000->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>.
+
+Duplex choices are 'auto', 'half', 'full'.
+
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::MAU
 
 See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
 =cut

Info/Layer3/C6500.pm

@@ -31,34 +31,19 @@
 package SNMP::Info::Layer3::C6500;
 
 use strict;
+use warnings;
 use Exporter;
 use SNMP::Info::CiscoStack;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
-use SNMP::Info::CiscoVTP;
+use SNMP::Info::Layer3::CiscoSwitch;
+use SNMP::Info::MAU;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::C6500::ISA = qw/
-    SNMP::Info::CiscoVTP 
-    SNMP::Info::CiscoStpExtensions
     SNMP::Info::CiscoStack
-    SNMP::Info::LLDP
-    SNMP::Info::CDP 
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoStats
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
+    SNMP::Info::Layer3::CiscoSwitch
+    SNMP::Info::MAU
     Exporter
 /;
 
@@ -66,7 +51,7 @@ use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -75,52 +60,50 @@ $VERSION = '3.00_003';
 # The @ISA order should match these orders.
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
-    %SNMP::Info::CDP::MIBS,                %SNMP::Info::LLDP::MIBS,
-    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,    
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::Layer3::CiscoSwitch::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,
+    'CISCO-VIRTUAL-SWITCH-MIB' => 'cvsSwitchMode',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
     %SNMP::Info::CiscoStack::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
 );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
-    %SNMP::Info::CDP::FUNCS,                %SNMP::Info::LLDP::FUNCS,
-    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::Layer3::CiscoSwitch::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
 );
 
-
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
-    %SNMP::Info::CDP::MUNGE,                %SNMP::Info::LLDP::MUNGE,
-    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,    
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::Layer3::CiscoSwitch::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
 );
 
 sub vendor {
     return 'cisco';
 }
 
-sub cisco_comm_indexing { return 1; }
+sub serial {
+    my $c6500 = shift;
+
+    my $serial = $c6500->SUPER::serial();
+    return $serial if defined $serial and $serial;
+
+    # now grab the table only if SUPER cannot find it
+    my $e_serial = $c6500->e_serial();
+
+    # Find entity table entry for this unit
+    foreach my $e ( sort keys %$e_serial ) {
+        if (defined $e_serial->{$e} and $e_serial->{$e} !~ /^\s*$/) {
+            return $e_serial->{$e};
+        }
+    }
+}
 
 #  Newer versions use the ETHERLIKE-MIB to report operational duplex.
 
@@ -179,6 +162,16 @@ sub i_duplex_admin {
     }
 }
 
+sub is_virtual_switch {
+    my $cvs = shift;
+    my $cvsSwM = $cvs->cvsSwitchMode() || '';
+
+    if ( $cvsSwM eq 'multiNode' ) {
+        return 1;
+    }
+    return 0;
+}
+
 sub set_i_duplex_admin {
 
     # map a textual duplex to an integer one the switch understands
@@ -186,6 +179,20 @@ sub set_i_duplex_admin {
 
     my $c6500 = shift;
     my ( $duplex, $iid ) = @_;
+ 
+    if ( $c6500->is_virtual_switch() ) {
+
+        # VSS -> MAU
+        # Due to VSS bug
+        # 1. Set the ifMauDefaultType
+        # 2. Disable ifMauAutoNegAdminStatus
+        # If the second set is not done, this is not going to be
+        # working... Cisco Bug id CSCty97033.
+        # SXI is not working (up to at least relase SXI9).
+        # SXJ is working at SXJ3 (not before).
+
+        return $c6500->mau_set_i_duplex_admin( $duplex, $iid );
+    }
 
     my $el_duplex = $c6500->el_duplex($iid);
 
@@ -203,7 +210,31 @@ sub set_i_duplex_admin {
         return $c6500->set_p_duplex( $duplexes{$duplex}, $iid );
     }
     else {
-        return $c6500->SUPER::set_i_duplex_admin;
+        return $c6500->SUPER::set_i_duplex_admin( $duplex, $iid );
+    }
+}
+
+sub set_i_speed_admin {
+    my $c6500   = shift;
+    my ( $speed, $iid ) = @_;
+
+    if ( $c6500->is_virtual_switch() ) {
+
+        # VSS -> MAU
+        # Due to VSS bug
+        # 1. Set the ifMauDefaultType
+        # 2. Disable ifMauAutoNegAdminStatus
+        # If the second set is not done, this is not going to be working...
+        # Cisco Bug id CSCty97033.
+        # SXI is not working (at least up to relase SXI9).
+        # SXJ is working at SXJ3 (not before).
+
+        return $c6500->mau_set_i_speed_admin( $speed, $iid );
+    }
+    else {
+
+        # normal behavior using the CiscoStack method
+        return $c6500->SUPER::set_i_speed_admin( $speed, $iid );
     }
 }
 
@@ -252,25 +283,11 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::CiscoVTP
-
 =item SNMP::Info::CiscoStack
 
-=item SNMP::Info::CDP
+=item SNMP::Info::Layer3::CiscoSwitch
 
-=item SNMP::Info::CiscoStats
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoStpExtensions
+=item SNMP::Info::MAU
 
 =back
 
@@ -280,26 +297,12 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -313,51 +316,31 @@ These are methods that return scalar value from SNMP
 
     Returns 'cisco'
 
-=item $c6500->cisco_comm_indexing()
+=item $c6500->cvsSwitchMode()
 
-Returns 1.  Use vlan indexing.
+Returns the Switch status: multiNode or standalone.
+
+=item $c6500->is_virtual_switch()
+
+Return 1 if the switch (C<cvsSwitchMode>) is in multimode (VSS).
+
+=item $c6500->serial()
+
+Returns serial number of unit (falls back to C<entPhysicalSerialNum>).
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoStack
+=head2 Globals imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoStats
+=head2 Globals imported from SNMP::Info::MAU
 
-See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -402,48 +385,29 @@ Crosses $c6500->p_port() with $c6500->p_duplex() to utilize port C<ifIndex>.
     $c6500->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
         or die "Couldn't change port duplex. ",$c6500->error(1);
 
+=item $c6500->set_i_speed_admin(speed, ifIndex)
+
+Sets port speed, must be supplied with speed and port C<ifIndex>.
+
+Speed choices are '10', '100', '1000'.
+
+Crosses $c6500->p_port() with $c6500->p_speed() to utilize port C<ifIndex>.
+
 =back
 
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
 See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
 
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
 
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+=head2 Table Methods imported from SNMP::Info::MAU
 
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-=head2 Table Methods imported from SNMP::Info::Layer3
-
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
 
 =cut
-

Info/Layer3/Cisco.pm

@@ -31,59 +31,70 @@
 package SNMP::Info::Layer3::Cisco;
 
 use strict;
+use warnings;
 use Exporter;
 use SNMP::Info::CiscoVTP;
+use SNMP::Info::LLDP;
 use SNMP::Info::CDP;
 use SNMP::Info::CiscoStats;
-use SNMP::Info::CiscoImage;
 use SNMP::Info::CiscoRTT;
 use SNMP::Info::CiscoQOS;
 use SNMP::Info::CiscoConfig;
 use SNMP::Info::CiscoPower;
+use SNMP::Info::CiscoStpExtensions;
 use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
-    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
-    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
-    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
+@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP
+    SNMP::Info::LLDP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoRTT
+    SNMP::Info::CiscoQOS SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower SNMP::Info::CiscoStpExtensions
     SNMP::Info::Layer3
     Exporter/;
 @SNMP::Info::Layer3::Cisco::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS,
     %SNMP::Info::CiscoPower::MIBS,
     %SNMP::Info::CiscoConfig::MIBS,
     %SNMP::Info::CiscoQOS::MIBS,
     %SNMP::Info::CiscoRTT::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
     %SNMP::Info::CiscoStats::MIBS,
     %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::CiscoVTP::MIBS,
     'CISCO-EIGRP-MIB' => 'cEigrpAsRouterId',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,      %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS, %SNMP::Info::CiscoQOS::GLOBALS,
-    %SNMP::Info::CiscoRTT::GLOBALS,    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CiscoStats::GLOBALS,  %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS, 'eigrp_id' => 'cEigrpAsRouterId',
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoQOS::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    'eigrp_id' => 'cEigrpAsRouterId',
 );
 
 %FUNCS = (
     %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS,
     %SNMP::Info::CiscoPower::FUNCS,
     %SNMP::Info::CiscoConfig::FUNCS,
     %SNMP::Info::CiscoQOS::FUNCS,
     %SNMP::Info::CiscoRTT::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
     %SNMP::Info::CiscoStats::FUNCS,
     %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
     %SNMP::Info::CiscoVTP::FUNCS,
 
     # EIGRP
@@ -92,33 +103,36 @@ $VERSION = '3.00_003';
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE,
     %SNMP::Info::CiscoPower::MUNGE,
     %SNMP::Info::CiscoConfig::MUNGE,
     %SNMP::Info::CiscoQOS::MUNGE,
     %SNMP::Info::CiscoRTT::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,
     %SNMP::Info::CiscoStats::MUNGE,
     %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::CiscoVTP::MUNGE,
     'eigrp_peers' => \&SNMP::Info::munge_ip,
 );
 
 sub i_vlan {
-    my ($cisco)   = shift;
-    my ($partial) = shift;
+    my $cisco   = shift;
+    my $partial = shift;
 
-    my ($i_type)  = $cisco->i_type($partial);
-    my ($i_descr) = $cisco->i_description($partial);
-    my %i_vlan;
+    my $i_type  = $cisco->i_type($partial);
+    my $i_descr = $cisco->i_description($partial);
+    my $i_vlan  = $cisco->SUPER::i_vlan($partial);
 
     foreach my $idx ( keys %$i_descr ) {
-        if ( $i_type->{$idx} eq 'l2vlan' || $i_type->{$idx} eq 135 ) {
+        if (   $i_type->{$idx} eq 'l2vlan'
+            || $i_type->{$idx} eq '135' && !defined $i_vlan->{$idx} )
+        {
             if ( $i_descr->{$idx} =~ /\.(\d+)$/ ) {
-                $i_vlan{$idx} = $1;
+                $i_vlan->{$idx} = $1;
             }
         }
     }
-    return \%i_vlan;
+    return $i_vlan;
 }
 
 1;
@@ -127,7 +141,9 @@ __END__
 =head1 NAME
 
 SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
-that are not covered in other classes.
+that are not covered in other classes and the base L3 Cisco class for other
+device specific L3 Cisco classes.
+
 
 =head1 AUTHOR
 
@@ -151,7 +167,8 @@ Max Baker
 
 =head1 DESCRIPTION
 
-Subclass for Generic Cisco Routers running IOS
+Subclass for Generic Cisco Routers running IOS and the base L3 Cisco class
+for other device specific L3 Cisco classes.
 
 =head2 Inherited Classes
 
@@ -159,12 +176,12 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::CiscoVTP
 
+=item SNMP::Info::LLDP
+
 =item SNMP::Info::CDP
 
 =item SNMP::Info::CiscoStats
 
-=item SNMP::Info::CiscoImage
-
 =item SNMP::Info::CiscoRTT
 
 =item SNMP::Info::CiscoQOS
@@ -173,6 +190,8 @@ Subclass for Generic Cisco Routers running IOS
 
 =item SNMP::Info::Power
 
+=item SNMP::Info::CiscoStpExtensions
+
 =item SNMP::Info::Layer3
 
 =back
@@ -187,12 +206,12 @@ Subclass for Generic Cisco Routers running IOS
 
 See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
 
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
 See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
@@ -201,6 +220,8 @@ See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
 
 See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
 
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
@@ -211,10 +232,6 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $cisco->vendor()
-
-    Returns 'cisco'
-
 =item $cisco->eigrp_id()
 
 (C<cEigrpAsRouterId>)
@@ -225,6 +242,10 @@ These are methods that return scalar value from SNMP
 
 See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::CDP
 
 See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
@@ -233,10 +254,6 @@ See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
 =head2 Globals imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
@@ -253,6 +270,10 @@ See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
 
 See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
@@ -280,6 +301,10 @@ Returns a mapping between C<ifIndex> and the PVID or default VLAN.
 
 See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CDP
 
 See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
@@ -288,10 +313,6 @@ See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoRTT
 
 See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
@@ -308,6 +329,10 @@ See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
 
 See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
 
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/CiscoASA.pm

@@ -0,0 +1,195 @@
+# SNMP::Info::Layer3::CiscoASA
+# $Id$
+#
+# Copyright (c) 2013 Moe Kraus
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoASA;
+
+use strict;
+use warnings;
+use Exporter;
+use SNMP::Info::CiscoStack;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::CiscoASA::ISA = qw/
+    SNMP::Info::CiscoStats
+    SNMP::Info::Layer3
+    Exporter/;
+@SNMP::Info::Layer3::CiscoASA::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStack::MIBS, );
+
+%GLOBALS
+    = ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CiscoStack::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,
+    'mac_table' => 'ifPhysAddress',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,
+    'mac_table' => \&SNMP::Info::munge_mac,
+);
+
+sub b_mac {
+    my ($asa) = shift;
+    my $macs = $asa->mac_table();
+    my @macs;
+
+    # gather physical addresses
+    foreach my $i ( keys %$macs ) {
+        my $mac = $macs->{$i};
+
+        # don't catch the bad macs with zeroed OUI
+        if ( $mac !~ m/(0{1,2}:){3}/ ) {
+            push( @macs, $mac );
+        }
+        @macs = sort(@macs);
+    }
+
+    # return the least mac
+    return $macs[0];
+}
+
+sub i_description {
+    my $self    = shift;
+    my $partial = shift;
+
+    my $i_descr = $self->orig_i_description($partial) || {};
+
+    foreach my $ifindex ( keys %$i_descr ) {
+        $i_descr->{$ifindex} =~ /'(.*)'/;
+        $i_descr->{$ifindex} = $1
+            if defined $1;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoASA - Cisco Adaptive Security Appliance
+
+=head1 AUTHOR
+
+Moe Kraus
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $cisco = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $asa->class();
+ print "SNMP::Info determined this device to fall under subclass: $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Cisco ASA Devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoStack
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $asa->b_mac()
+
+Returns base mac.
+Overrides base mac function in L<SNMP::Info::Layer3>.
+
+=item $asa->i_description()
+
+Overrides base interface description function in L<SNMP::Info> to return the
+configured interface name instead of "Adaptive Security Appliance
+'$configured interface name' interface".
+
+=back
+
+=head2 Globals imported from SNMP::Info::CiscoStack
+
+See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStack
+
+See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/CiscoFWSM.pm

@@ -31,34 +31,31 @@
 package SNMP::Info::Layer3::CiscoFWSM;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::Layer3::Cisco;
+use SNMP::Info::CiscoStack;
+use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::Layer3::Cisco
-    Exporter/;
+@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::CiscoStack
+	SNMP::Info::Layer3
+	Exporter/;
 @SNMP::Info::Layer3::CiscoFWSM::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
-%MIBS = (
-    %SNMP::Info::Layer3::Cisco::MIBS,
-);
+%MIBS = ( %SNMP::Info::Layer3::MIBS, %SNMP::Info::CiscoStack::MIBS, );
 
-%GLOBALS = (
-    %SNMP::Info::Layer3::Cisco::GLOBALS,
-);
+%GLOBALS
+	= ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CiscoStack::GLOBALS, );
 
 %FUNCS = (
-    %SNMP::Info::Layer3::Cisco::FUNCS,
-
-);
-
-%MUNGE = (
-    %SNMP::Info::Layer3::Cisco::MUNGE,
+	%SNMP::Info::Layer3::FUNCS,
+	%SNMP::Info::CiscoStack::FUNCS,
 );
 
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, %SNMP::Info::CiscoStack::MUNGE, );
 
 # For FWSMs, the ipNetToPhysicalPhysAddress table appears to be of the form:
 # $ifindex.$inetaddresstype.$proto.$ip_address -> $mac_address
@@ -69,65 +66,65 @@ $VERSION = '3.00_003';
 # This doesn't really line up to what at_* return, so we munge it
 
 sub at_paddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
-    my $n_paddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $paddrs   = $fwsm->n2p_paddr($partial);
+	my $n_paddrs = {};
 
-	next if($proto != 4); # at_paddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $n_paddrs->{"$ifindex.$ip"} = $paddr;
-    }
-    return $n_paddrs;
+		next if ( $proto != 4 );    # at_paddr doesn't support non-IPv4
+
+		$n_paddrs->{"$ifindex.$ip"} = $paddr;
+	}
+	return $n_paddrs;
 }
 
 sub at_netaddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
+	my $paddrs = $fwsm->n2p_paddr($partial);
 
-    my $netaddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $netaddrs = {};
 
-	next if($proto != 4); # at_netaddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $netaddrs->{"$ifindex.$ip"} = $ip;
-    }
-    return $netaddrs;
+		next if ( $proto != 4 );    # at_netaddr doesn't support non-IPv4
+
+		$netaddrs->{"$ifindex.$ip"} = $ip;
+	}
+	return $netaddrs;
 }
 
 sub at_ifaddr {
-    my ($fwsm)    = shift;
-    my ($partial)  = shift;
+	my ($fwsm)    = shift;
+	my ($partial) = shift;
 
-    my $paddrs = $fwsm->n2p_paddr($partial);
+	my $paddrs = $fwsm->n2p_paddr($partial);
 
-    my $ifaddrs = {};
-    
-    foreach my $key (keys %$paddrs) {
-        my $paddr = $paddrs->{$key};
-        my @parts = split /\./, $key;
-	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
-	my $ip = join ".", @parts;
+	my $ifaddrs = {};
 
-	next if($proto != 4); # at_ifaddr doesn't support non-IPv4
+	foreach my $key ( keys %$paddrs ) {
+		my $paddr = $paddrs->{$key};
+		my @parts = split /\./, $key;
+		my ( $ifindex, $addrtype, $proto ) = splice @parts, 0, 3;
+		my $ip = join ".", @parts;
 
-        $ifaddrs->{"$ifindex.$ip"} = $ip;
-    }
-    return $ifaddrs;
+		next if ( $proto != 4 );    # at_ifaddr doesn't support non-IPv4
+
+		$ifaddrs->{"$ifindex.$ip"} = $ip;
+	}
+	return $ifaddrs;
 }
 
 1;
@@ -135,8 +132,8 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules for
-features not covered elsewhere.
+SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules
+for features not covered elsewhere.
 
 =head1 AUTHOR
 
@@ -146,14 +143,14 @@ Brian De Wolf
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $fwsm = new SNMP::Info(
-                        AutoSpecify => 1,
-                        Debug       => 1,
-                        # These arguments are passed directly to SNMP::Session
-                        DestHost    => 'myswitch',
-                        Community   => 'public',
-                        Version     => 2
-                        ) 
-    or die "Can't connect to DestHost.\n";
+						AutoSpecify => 1,
+						Debug       => 1,
+						# These arguments are passed directly to SNMP::Session
+						DestHost    => 'myswitch',
+						Community   => 'public',
+						Version     => 2
+						) 
+	or die "Can't connect to DestHost.\n";
 
  my $class      = $fwsm->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
@@ -166,7 +163,9 @@ Subclass for Cisco Firewall Services Modules
 
 =over
 
-=item SNMP::Info::Layer3::Cisco
+=item SNMP::Info::CiscoStack
+
+=item SNMP::Info::Layer3
 
 =back
 
@@ -176,15 +175,21 @@ Subclass for Cisco Firewall Services Modules
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
 
 =head1 GLOBALS
 
-=head2 Global Methods imported from SNMP::Info::Layer3::Cisco
+=head2 Globals imported from SNMP::Info::CiscoStack
 
-See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -216,8 +221,12 @@ the MIB to provide that information isn't supported on FWSM.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+=head2 Table Methods imported from SNMP::Info::CiscoStack
 
-See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/CiscoSwitch.pm

@@ -0,0 +1,190 @@
+# SNMP::Info::Layer3::CiscoSwitch
+# $Id$
+#
+# Copyright (c) 2014 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoSwitch;
+
+use strict;
+use warnings;
+use Exporter;
+use SNMP::Info::CiscoAgg;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::Layer3::Cisco;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+@SNMP::Info::Layer3::CiscoSwitch::ISA = qw/
+    SNMP::Info::CiscoAgg
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::Layer3::Cisco
+    Exporter
+/;
+
+@SNMP::Info::Layer3::CiscoSwitch::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = (
+    %SNMP::Info::Layer3::Cisco::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoAgg::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::Cisco::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoAgg::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::Cisco::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoAgg::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::Cisco::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoAgg::MUNGE,
+);
+
+sub cisco_comm_indexing { return 1; }
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoSwitch - Base class for L3 Cisco switches
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $switch = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $switch->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Base subclass for Cisco Layer 2/3 Switches.  
+
+These devices have switch specific characteristics beyond those in
+traditional routers covered by L<SNMP::Info::Layer3::Cisco>. For example,
+port security interface information from L<SNMP::Info::CiscoPortSecurity>.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $swich = new SNMP::Info::Layer3::CiscoSwitch(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoAgg
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::Layer3::Cisco
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoAgg/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $switch->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoAgg
+
+See documentation in L<SNMP::Info::CiscoAgg/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Contivity.pm

@@ -42,7 +42,7 @@ use SNMP::Info::Entity;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS, %SNMP::Info::Layer3::MIBS, %SNMP::Info::Entity::MIBS,

Info/Layer3/Dell.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -193,25 +193,6 @@ sub i_duplex_admin {
     return \%i_duplex_admin;
 }
 
-# Use same methods as netgear.  Some device didn't implement the bridge MIB
-# forwarding table and some don't return MACs for VLANs other than default yet
-# don't support community indexing, so we use the Q-BRIDGE-MIB forwarding
-# table.  Fall back to the orig functions if the qb versions don't
-# return anything.
-sub fw_mac {
-    my $dell = shift;
-    my $ret  = $dell->qb_fw_mac();
-    $ret = $dell->orig_fw_mac() if ( !defined($ret) );
-    return $ret;
-}
-
-sub fw_port {
-    my $dell = shift;
-    my $ret  = $dell->qb_fw_port();
-    $ret = $dell->orig_fw_port() if ( !defined($ret) );
-    return $ret;
-}
-
 sub _vendor {
     my $dell = shift;
 
@@ -406,23 +387,6 @@ sometimes not unique.
 Returns reference to hash of iid to current link administrative duplex
 setting.
 
-=item $dell->fw_mac()
-
-Returns reference to hash of forwarding table MAC Addresses.
-
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
-
-=item $dell->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid)
-
-Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
-the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
-C<Q-BRIDGE-MIB> doesn't return anything.
-
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3

Info/Layer3/Enterasys.pm

@@ -44,7 +44,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::CDP::MIBS,
@@ -149,22 +149,6 @@ sub i_duplex_admin {
     return $enterasys->mau_i_duplex_admin($partial);
 }
 
-# Normal BRIDGE-MIB has issues on some devices, duplicates and
-# non-increasing oids, Use Q-BRIDGE-MIB for macsuck
-sub fw_mac {
-    my $enterasys = shift;
-    my $partial   = shift;
-
-    return $enterasys->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $enterasys = shift;
-    my $partial   = shift;
-
-    return $enterasys->qb_fw_port($partial);
-}
-
 #  LLDP table timefilter implementation continuously increments when walked
 #  and we may never reach the end of the table.  This behavior can be
 #  modified with the "set snmp timefilter break disable" command,
@@ -373,17 +357,6 @@ See documentation for mau_i_duplex() in L<SNMP::Info::MAU/"TABLE METHODS">.
 See documentation for mau_i_duplex_admin() in
 L<SNMP::Info::MAU/"TABLE METHODS">.
 
-=item $enterasys->fw_mac()
-
-Returns reference to hash of forwarding table MAC Addresses.
-
-=item $enterasys->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid).
-
-(C<dot1qTpFdbPort>)
-
 =back
 
 =head2 Link Layer Discovery Protocol (LLDP) Overrides

Info/Layer3/Extreme.pm

@@ -46,7 +46,7 @@ use SNMP::Info::EDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -290,9 +290,6 @@ sub fw_mac {
     my $b = $extreme->SUPER::fw_mac();
     return $b if (keys %$b);
 
-    my $qb = $extreme->qb_fw_mac();
-    return $qb if (keys %$qb);
-    
     return $extreme->ex_fw_mac();
 }
 
@@ -301,9 +298,6 @@ sub fw_port {
     
     my $b = $extreme->SUPER::fw_port();
     return $b if (keys %$b);
-
-    my $qb = $extreme->qb_fw_port();
-    return $qb if (keys %$qb);
     
     return $extreme->ex_fw_port();
 }
@@ -314,9 +308,6 @@ sub fw_status {
     my $b = $extreme->SUPER::fw_status();
     return $b if (keys %$b);
 
-    my $qb = $extreme->qb_fw_status();
-    return $qb if (keys %$qb);
-
     return $extreme->ex_fw_status();
 }
 
@@ -505,14 +496,14 @@ sub _xos_i_vlan_membership {
                 push( @{$ret}, ( $slotx * $slot + $i + 1 ) )
                     if ( @$portlist[$i] );
             }
+        }
 
-            #Create HoA ifIndex -> VLAN array
-            foreach my $port ( @{$ret} ) {
-                my $ifindex = $index->{$port};
-                next unless ( defined($ifindex) );    # shouldn't happen
-                next if ( defined $partial and $ifindex !~ /^$partial$/ );
-                push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
-            }
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            push( @{ $i_vlan_membership->{$ifindex} }, $vlan );
         }
     }
     return $i_vlan_membership;

Info/Layer3/F5.pm

@@ -38,7 +38,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Force10.pm

@@ -43,7 +43,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -104,22 +104,6 @@ sub model {
     return $model;
 }
 
-# Use Q-BRIDGE-MIB
-
-sub fw_mac {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $force10 = shift;
-    my $partial = shift;
-
-    return $force10->qb_fw_port($partial);
-}
-
 sub v_name {
     my $force10 = shift;
     my $partial = shift;
@@ -300,14 +284,6 @@ Returns reference to hash of arrays:
 key = C<ifIndex>, value = array of VLAN IDs.
 These are the VLANs which are members of the egress list for the port.
 
-=item $force10->fw_mac()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $force10->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
 =item $force10->i_duplex_admin()
 
 Returns info from F<MAU-MIB>

Info/Layer3/Foundry.pm

@@ -38,27 +38,36 @@ use SNMP::Info::Layer3;
 use SNMP::Info::FDP;
 use SNMP::Info::LLDP;
 
-@SNMP::Info::Layer3::Foundry::ISA = qw/SNMP::Info::FDP SNMP::Info::LLDP
-    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Foundry::ISA = qw/
+    SNMP::Info::FDP
+    SNMP::Info::LLDP
+    SNMP::Info::Layer3
+    Exporter
+/;
 @SNMP::Info::Layer3::Foundry::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::LLDP::MIBS,
     %SNMP::Info::FDP::MIBS,
+
     'FOUNDRY-SN-ROOT-MIB'         => 'foundry',
     'FOUNDRY-SN-AGENT-MIB'        => 'snChasPwrSupplyDescription',
     'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snSwGroupOperMode',
+    'FOUNDRY-SN-STACKING-MIB'     => 'snStackingOperUnitRole',
+    'FOUNDRY-POE-MIB'             => 'snAgentPoeGblPowerCapacityTotal',
+    'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snSwGroupOperMode',
 );
 
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
     %SNMP::Info::LLDP::GLOBALS,
     %SNMP::Info::FDP::GLOBALS,
+
     'mac'        => 'ifPhysAddress.1',
     'chassis'    => 'entPhysicalDescr.1',
     'temp'       => 'snChasActualTemperature',
@@ -81,11 +90,22 @@ $VERSION = '3.00_003';
     'sw_duplex' => 'snSwPortInfoChnMode',
     'sw_type'   => 'snSwPortInfoMediaType',
     'sw_speed'  => 'snSwPortInfoSpeed',
+
+    # FOUNDRY-SN-AGENT-MIB::snAgentConfigModule2Table
+    'ag_mod2_type' => 'snAgentConfigModule2Type',
+
+    # FOUNDRY-SN-AGENT-MIB::snAgentConfigModuleTable
+    'ag_mod_type' => 'snAgentConfigModuleType',
+
 );
 
 %MUNGE = (
-    %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
     %SNMP::Info::FDP::MUNGE,
+
+    'ag_mod2_type' => \&SNMP::Info::munge_e_type,
+    'ag_mod_type'  => \&SNMP::Info::munge_e_type,
 );
 
 sub i_ignore {
@@ -152,6 +172,7 @@ sub model {
     return $id unless defined $model;
 
     $model =~ s/^sn//;
+    $model =~ s/Switch//;
 
     return $model;
 }
@@ -270,6 +291,532 @@ sub stp_p_state {
 
 }
 
+# Entity MIB is supported on the Brocade NetIron XMR, NetIron MLX, MLXe,
+# NetIron CES, NetIron CER, and older EdgeIron series devices.
+# Try Entity MIB methods first and fall back to Pseudo ENTITY-MIB methods for
+# other devices.
+# e_fwver, e_hwver, e_swver not supported in psuedo methods, no need to
+# override
+
+sub e_index {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_index($partial)
+        || $foundry->brcd_e_index($partial);
+}
+
+sub e_class {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_class($partial)
+        || $foundry->brcd_e_class($partial);
+}
+
+sub e_descr {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_descr($partial)
+        || $foundry->brcd_e_descr($partial);
+}
+
+sub e_name {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_name($partial)
+        || $foundry->brcd_e_name($partial);
+}
+
+sub e_parent {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_parent($partial)
+        || $foundry->brcd_e_parent($partial);
+}
+
+sub e_pos {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_pos($partial) || $foundry->brcd_e_pos($partial);
+}
+
+sub e_serial {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_serial($partial)
+        || $foundry->brcd_e_serial($partial);
+}
+
+sub e_type {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_type($partial)
+        || $foundry->brcd_e_type($partial);
+}
+
+sub e_vendor {
+    my $foundry = shift;
+    my $partial = shift;
+
+    return $foundry->SUPER::e_vendor($partial)
+        || $foundry->brcd_e_vendor($partial);
+}
+
+# Pseudo ENTITY-MIB methods
+
+# This class supports both stackable and chassis based switches, identify if
+# we have a stackable so that we return appropriate entPhysicalClass
+
+# Identify if the stackable is actually a stack vs. single switch
+sub _brcd_stack_master {
+    my $foundry = shift;
+
+    my $roles = $foundry->snStackingOperUnitRole() || {};
+
+    foreach my $iid ( keys %$roles ) {
+        my $role = $roles->{$iid};
+        next unless $role;
+        if ( $role eq 'active' ) {
+            return $iid;
+        }
+    }
+    return;
+}
+
+sub brcd_e_index {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $stack_master = $foundry->_brcd_stack_master();
+    my $brcd_e_idx 
+        = $foundry->snAgentConfigModule2Description($partial)
+        || $foundry->snAgentConfigModuleDescription($partial)
+        || {};
+
+    my %brcd_e_index;
+    if ($stack_master) {
+
+        # Stack Entity
+        $brcd_e_index{0} = 1;
+    }
+
+    foreach my $iid ( keys %$brcd_e_idx ) {
+
+        my $index = $iid;
+
+        # Format into consistent integer format so that numeric sorting works
+        if ( $iid =~ /(\d+)\.(\d+)/ ) {
+            $index = "$1" . sprintf "%02d", $2;
+        }
+        $brcd_e_index{$iid} = $index;
+    }
+    return \%brcd_e_index;
+}
+
+sub brcd_e_class {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %e_class;
+    foreach my $iid ( keys %$e_idx ) {
+        if ( $iid == 0 ) {
+            $e_class{$iid} = 'stack';
+        }
+
+        # Were going to assume chassis at slot/index 1
+        # If this turns out to be false in some cases we can check
+        # snAgentConfigModuleNumberOfCpus as other modules won't have cpus?
+        elsif ( $iid =~ /1$/ ) {
+            $e_class{$iid} = 'chassis';
+        }
+        else {
+            $e_class{$iid} = 'module';
+        }
+    }
+    return \%e_class;
+}
+
+sub brcd_e_descr {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $brcd_e_idx = $foundry->brcd_e_index($partial) || {};
+    my $m_descrs 
+        = $foundry->snAgentConfigModule2Description($partial)
+        || $foundry->snAgentConfigModuleDescription($partial)
+        || {};
+
+    my %brcd_e_descr;
+    foreach my $iid ( keys %$brcd_e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_descr{$iid} = $foundry->description();
+        }
+
+        my $descr = $m_descrs->{$iid};
+        next unless defined $descr;
+
+        $brcd_e_descr{$iid} = $descr;
+    }
+    return \%brcd_e_descr;
+}
+
+sub brcd_e_name {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $stack_master = $foundry->_brcd_stack_master();
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_name;
+    foreach my $iid ( keys %$e_idx ) {
+        if ( $iid == 0 ) {
+            $brcd_e_name{$iid} = 'Stack Master Unit';
+        }
+
+        elsif ( $stack_master && $iid =~ /(\d+)\.1$/ ) {
+            $brcd_e_name{$iid} = "Switch Stack Unit $1";
+        }
+        elsif ( $iid =~ /1$/ ) {
+            $brcd_e_name{$iid} = "Switch";
+        }
+        else {
+            $brcd_e_name{$iid} = 'Module';
+        }
+    }
+    return \%brcd_e_name;
+}
+
+sub brcd_e_vendor {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_vendor;
+    foreach my $iid ( keys %$e_idx ) {
+        my $vendor = 'brocade';
+
+        $brcd_e_vendor{$iid} = $vendor;
+    }
+    return \%brcd_e_vendor;
+}
+
+sub brcd_e_serial {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+    my $serials 
+        = $foundry->snAgentConfigModule2SerialNumber($partial)
+        || $foundry->snAgentConfigModuleSerialNumber($partial)
+        || {};
+
+    my %brcd_e_serial;
+    foreach my $iid ( keys %$e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_serial{$iid} = $foundry->serial();
+        }
+
+        my $serial = $serials->{$iid};
+        next unless defined $serial;
+
+        $brcd_e_serial{$iid} = $serial;
+    }
+    return \%brcd_e_serial;
+}
+
+sub brcd_e_type {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+    my $types 
+        = $foundry->ag_mod2_type($partial)
+        || $foundry->ag_mod_type($partial)
+        || {};
+
+    my %brcd_e_type;
+    foreach my $iid ( keys %$e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_type{$iid} = $foundry->model();
+        }
+
+        my $type = $types->{$iid};
+        next unless defined $type;
+
+        $brcd_e_type{$iid} = $type;
+    }
+    return \%brcd_e_type;
+}
+
+sub brcd_e_pos {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_pos;
+    foreach my $iid ( keys %$e_idx ) {
+
+        my $pos;
+        if ( $iid == 0 ) {
+            $pos = -1;
+        }
+        elsif ( $iid =~ /(\d+)\.1$/ ) {
+            $pos = $1;
+        }
+        elsif ( $iid =~ /(\d+)$/ ) {
+            $pos = $1;
+        }
+
+        $brcd_e_pos{$iid} = $pos;
+    }
+    return \%brcd_e_pos;
+}
+
+sub brcd_e_parent {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $stack_master = $foundry->_brcd_stack_master();
+    my $e_idx = $foundry->brcd_e_index($partial) || {};
+
+    my %brcd_e_parent;
+    foreach my $iid ( keys %$e_idx ) {
+
+        if ( $iid == 0 ) {
+            $brcd_e_parent{$iid} = 0;
+        }
+        elsif ( $stack_master && $iid =~ /(\d+)\.1$/ ) {
+            $brcd_e_parent{$iid} = 1;
+        }
+        elsif ( $iid =~ /1$/ ) {
+            $brcd_e_parent{$iid} = 0;
+        }
+        elsif ( $iid =~ /(\d+).\d+/ ) {
+            $brcd_e_parent{$iid} = "$1" . "01";
+        }
+
+        # assume non-stacked and chassis at index 1
+        else {
+            $brcd_e_parent{$iid} = 1;
+        }
+    }
+    return \%brcd_e_parent;
+}
+
+# The index of snAgentPoePortTable is snAgentPoePortNumber which equals
+# ifIndex; however, to emulate POWER-ETHERNET-MIB we need a "module.port"
+# index.  If ifDescr has the format x/x/x use it to determine the module
+# otherwise default to 1.  Unfortunately, this means we can't map any
+# snAgentPoePortTable leafs directly and partials will not be supported.
+sub peth_port_ifindex {
+    my $foundry = shift;
+
+    my $indexes = $foundry->snAgentPoePortNumber();
+    my $descrs  = $foundry->i_description();
+
+    my $peth_port_ifindex = {};
+    foreach my $i ( keys %$indexes ) {
+        my $descr = $descrs->{$i};
+        next unless $descr;
+
+        my $new_idx = "1.$i";
+
+        if ( $descr =~ /(\d+)\/\d+\/\d+/ ) {
+            $new_idx = "$1.$i";
+        }
+        $peth_port_ifindex->{$new_idx} = $i;
+    }
+    return $peth_port_ifindex;
+}
+
+sub peth_port_admin {
+    my $foundry = shift;
+
+    my $p_index      = $foundry->peth_port_ifindex()     || {};
+    my $admin_states = $foundry->snAgentPoePortControl() || {};
+
+    my $peth_port_admin = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $state = $admin_states->{$port};
+
+        if ( $state =~ /enable/ ) {
+            $peth_port_admin->{$i} = 'true';
+        }
+        else {
+            $peth_port_admin->{$i} = 'false';
+        }
+    }
+    return $peth_port_admin;
+}
+
+sub peth_port_neg_power {
+    my $foundry = shift;
+
+    my $p_index         = $foundry->peth_port_ifindex()   || {};
+    my $peth_port_class = $foundry->snAgentPoePortClass() || {};
+
+    my $poemax = {
+        '0' => 12950,
+        '1' => 3840,
+        '2' => 6490,
+        '3' => 12950,
+        '4' => 25500
+    };
+
+    my $peth_port_neg_power = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $power = $poemax->{ $peth_port_class->{$port} };
+        next unless $power;
+
+        $peth_port_neg_power->{$i} = $power;
+    }
+    return $peth_port_neg_power;
+}
+
+sub peth_port_power {
+    my $foundry = shift;
+
+    my $p_index       = $foundry->peth_port_ifindex()      || {};
+    my $port_consumed = $foundry->snAgentPoePortConsumed() || {};
+
+    my $peth_port_power = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $power = $port_consumed->{$port};
+        next unless $power;
+
+        $peth_port_power->{$i} = $power;
+    }
+    return $peth_port_power;
+}
+
+sub peth_port_class {
+    my $foundry = shift;
+
+    my $p_index    = $foundry->peth_port_ifindex()   || {};
+    my $port_class = $foundry->snAgentPoePortClass() || {};
+
+    my $peth_port_class = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $power = $port_class->{$port};
+        next unless $power;
+
+        $peth_port_class->{$i} = "class$power";
+    }
+    return $peth_port_class;
+}
+
+sub peth_port_status {
+    my $foundry = shift;
+
+    my $p_index      = $foundry->peth_port_ifindex()     || {};
+    my $admin_states = $foundry->snAgentPoePortControl() || {};
+
+    my $peth_port_status = {};
+    foreach my $i ( keys %$p_index ) {
+        my ( $module, $port ) = split( /\./, $i );
+        my $state = $admin_states->{$port};
+
+        if ( $state =~ /enable/ ) {
+            $peth_port_status->{$i} = 'deliveringPower';
+        }
+        else {
+            $peth_port_status->{$i} = 'disabled';
+        }
+    }
+    return $peth_port_status;
+}
+
+sub peth_power_status {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $watts = $foundry->snAgentPoeUnitPowerCapacityTotal($partial) || {};
+
+    my $peth_power_status = {};
+    foreach my $i ( keys %$watts ) {
+        $peth_power_status->{$i} = 'on';
+    }
+    return $peth_power_status;
+}
+
+sub peth_power_watts {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $watts_total = $foundry->snAgentPoeUnitPowerCapacityTotal($partial)
+        || {};
+
+    my $peth_power_watts = {};
+    foreach my $i ( keys %$watts_total ) {
+        my $total = $watts_total->{$i};
+        next unless $total;
+
+        $peth_power_watts->{$i} = $total / 1000;
+    }
+    return $peth_power_watts;
+}
+
+sub peth_power_consumption {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $watts_total = $foundry->snAgentPoeUnitPowerCapacityTotal($partial)
+        || {};
+    my $watts_free = $foundry->snAgentPoeUnitPowerCapacityFree($partial)
+        || {};
+
+    my $peth_power_consumed = {};
+    foreach my $i ( keys %$watts_total ) {
+        my $total = $watts_total->{$i};
+        next unless $total;
+        my $free = $watts_free->{$i} || 0;
+
+        $peth_power_consumed->{$i} = ( $total - $free ) / 1000;
+    }
+    return $peth_power_consumed;
+}
+
+sub agg_ports {
+  my $dev = shift;
+
+  # TODO: implement partial
+  my $trunks = $dev->snMSTrunkPortList;
+  my $ports  = $dev->snSwPortIfIndex; # sw_index()
+
+  return {} unless
+    ref {} eq ref $trunks and scalar keys %$trunks
+    and ref {} eq ref $ports and scalar keys %$ports;
+
+  my $ret = {};
+  foreach my $m (keys %$trunks) {
+      my $skip = 0;
+      while (my $s = unpack("x${skip}n2", $trunks->{$m})) {
+          $ret->{ $ports->{$s} } = $ports->{$m};
+          $skip += 2;
+      }
+  }
+
+  return $ret;
+}
+
 1;
 __END__
 
@@ -329,6 +876,12 @@ after determining a more specific class using the method above.
 
 =item F<FOUNDRY-SN-SWITCH-GROUP-MIB>
 
+=item F<FOUNDRY-SN-STACKING-MIB>
+
+=item F<FOUNDRY-POE-MIB>
+
+=item F<FOUNDRY-SN-SWITCH-GROUP-MIB>
+
 =item Inherited Classes' MIBs
 
 See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
@@ -348,7 +901,8 @@ These are methods that return scalar value from SNMP
 =item $foundry->model()
 
 Returns model type.  Checks $foundry->id() against the F<FOUNDRY-SN-ROOT-MIB>
-and removes 'C<sn>'.  EdgeIron models determined through F<ENTITY-MIB>.  
+and removes 'C<sn>' and 'C<Switch>'.  EdgeIron models determined
+through F<ENTITY-MIB>.  
 
 =item $foundry->vendor()
 
@@ -430,8 +984,8 @@ See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
-These are methods that return tables of information in the form of a reference
-to a hash.
+These are methods that return tables of information in the form of a
+reference to a hash.
 
 =head2 Overrides
 
@@ -462,6 +1016,136 @@ Skipped if device is an EdgeIron 24G due to reports of hangs.
 
 (C<dot1dStpPortState>)
 
+=item $foundry->agg_ports()
+
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
+
+=back
+
+=head2 F<ENTITY-MIB> Information
+
+F<ENTITY-MIB> is supported on the Brocade NetIron XMR, NetIron MLX, MLXe,
+NetIron CES, NetIron CER, and older EdgeIron series devices.  For other
+devices which do not support it, these methods emulate Physical Table methods
+using F<FOUNDRY-SN-AGENT-MIB>.  See Pseudo F<ENTITY-MIB> information below
+for details on brcd_e_* methods.
+
+=over
+
+=item $foundry->e_index() 
+
+If the device doesn't support C<entPhysicalDescr>, this will
+try brcd_e_index().
+
+Note that this is based on C<entPhysicalDescr> due to implementation
+details of SNMP::Info::Entity::e_index().
+
+=item $foundry->e_class() 
+
+If the device doesn't support C<entPhysicalClass>, this will try
+brcd_e_class().
+
+=item $foundry->e_descr() 
+
+If the device doesn't support C<entPhysicalDescr>, this will try
+brcd_e_descr().
+
+=item $foundry->e_name() 
+
+If the device doesn't support C<entPhysicalName>, this will try
+brcd_e_name().
+
+=item $foundry->e_parent() 
+
+If the device doesn't support C<entPhysicalContainedIn>, this will try
+brcd_e_parent().
+
+=item $foundry->e_pos() 
+
+If the device doesn't support C<entPhysicalParentRelPos>, this will try
+brcd_e_pos().
+
+=item $foundry->e_serial() 
+
+If the device doesn't support C<entPhysicalSerialNum>, this will try
+brcd_e_serial().
+
+=item $foundry->e_type() 
+
+If the device doesn't support C<entPhysicalVendorType>, this will try
+brcd_e_type().
+
+=item $foundry->e_vendor() 
+
+If the device doesn't support C<entPhysicalMfgName>, this will try
+brcd_e_vendor().
+
+=back
+
+=head2 Pseudo F<ENTITY-MIB> information
+
+These methods emulate F<ENTITY-MIB> Physical Table methods using
+F<FOUNDRY-SN-AGENT-MIB>. 
+
+=over
+
+=item $foundry->brcd_e_index()
+
+Returns reference to hash.  Key: IID, Value: Integer, Indices are combined
+into an integer, each index is two digits padded with leading zero if
+required.
+
+=item $foundry->brcd_e_class()
+
+Returns reference to hash.  Key: IID, Value: General hardware type.
+
+Returns 'stack' for the stack master in an active stack, 'chassis' for
+base switches that contain modules, and 'module' for others.
+
+=item $foundry->brcd_e_descr()
+
+Returns reference to hash.  Key: IID, Value: Human friendly name
+
+(C<snAgentConfigModule2Description>) or
+(C<snAgentConfigModuleDescription>) 
+
+=item $foundry->brcd_e_name()
+
+Returns reference to hash.  Key: IID, Value: Human friendly name
+
+=item $foundry->brcd_e_vendor()
+
+Returns reference to hash.  Key: IID, Value: brocade
+
+=item $foundry->brcd_e_serial()
+
+Returns reference to hash.  Key: IID, Value: Serial number
+
+Serial number is $foundry->serial() for a stack master unit and 
+(C<snAgentConfigModule2SerialNumber>) or
+(C<snAgentConfigModuleSerialNumber>) for all others.
+
+=item $foundry->brcd_e_type()
+
+Returns reference to hash.  Key: IID, Value: Type of component/sub-component
+as defined under C<snAgentConfigModule2Type> or C<snAgentConfigModule2Type> 
+in F<FOUNDRY-SN-AGENT-MIB>.
+
+=item $foundry->brcd_e_pos()
+
+Returns reference to hash.  Key: IID, Value: The relative position among all
+entities sharing the same parent.
+
+(C<s5ChasComSubIndx>)
+
+=item $foundry->brcd_e_parent()
+
+Returns reference to hash.  Key: IID, Value: The value of brcd_e_index()
+for the entity which 'contains' this entity.  A value of zero indicates
+this entity is not contained in any other entity.
+
 =back
 
 =head2 Foundry Switch Port Information Table (C<snSwPortIfTable>)
@@ -494,6 +1178,70 @@ Returns reference to hash.  Current Port Speed.
 
 =back
 
+=head2 Power Over Ethernet Port Table
+
+These methods emulate the F<POWER-ETHERNET-MIB> Power Source Entity (PSE)
+Port Table C<pethPsePortTable> methods using the F<FOUNDRY-POE-MIB> Power
+over Ethernet Port Table C<snAgentPoePortTable>.
+
+=over
+
+=item $foundry->peth_port_ifindex()
+
+Creates an index of module.port to align with the indexing of the
+C<pethPsePortTable> with a value of C<ifIndex>.  The module defaults 1
+if otherwise unknown.
+
+=item $foundry->peth_port_admin()
+
+Administrative status: is this port permitted to deliver power?
+
+C<pethPsePortAdminEnable>
+
+=item $foundry->peth_port_status()
+
+Current status: is this port delivering power.
+
+=item $foundry->peth_port_class()
+
+Device class: if status is delivering power, this represents the 802.3af
+class of the device being powered.
+
+=item $foundry->peth_port_neg_power()
+
+The power, in milliwatts, that has been committed to this port.
+This value is derived from the 802.3af class of the device being
+powered.
+
+=item $foundry->peth_port_power()
+
+The power, in milliwatts, that the port is delivering.
+
+=back
+
+=head2 Power Over Ethernet Module Table
+
+These methods emulate the F<POWER-ETHERNET-MIB> Main Power Source Entity
+(PSE) Table C<pethMainPseTable> methods using the F<FOUNDRY-POE-MIB> Power
+over Ethernet Port Table C<snAgentPoeModuleTable >.
+
+=over
+
+=item $foundry->peth_power_watts()
+
+The power supply's capacity, in watts.
+
+=item $foundry->peth_power_status()
+
+The power supply's operational status.
+
+=item $foundry->peth_power_consumption()
+
+How much power, in watts, this power supply has been committed to
+deliver.
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
 See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.

Info/Layer3/H3C.pm

@@ -33,17 +33,26 @@ use strict;
 use Exporter;
 use SNMP::Info::Layer3;
 use SNMP::Info::LLDP;
+use SNMP::Info::IEEE802dot3ad 'agg_ports_lag';
 
-@SNMP::Info::Layer3::H3C::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
-@SNMP::Info::Layer3::H3C::EXPORT_OK = qw//;
+@SNMP::Info::Layer3::H3C::ISA = qw/
+  SNMP::Info::IEEE802dot3ad
+  SNMP::Info::LLDP
+  SNMP::Info::Layer3
+  Exporter
+/;
+@SNMP::Info::Layer3::H3C::EXPORT_OK = qw/
+  agg_ports
+/;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
     %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::IEEE802dot3ad::MIBS,
     'HH3C-LswDEVM-MIB'     => 'hh3cDevMFanStatus',
     'HH3C-LswINF-MIB'      => 'hh3cSlotPortMax',
     'HH3C-LSW-DEV-ADM-MIB' => 'hh3cLswSysVersion',
@@ -113,21 +122,7 @@ sub i_ignore {
     return \%i_ignore;
 }
 
-# Use Q-BRIDGE-MIB
-
-sub fw_mac {
-    my $l3  = shift;
-    my $partial = shift;
-
-    return $l3->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $l3  = shift;
-    my $partial = shift;
-
-    return $l3->qb_fw_port($partial);
-}
+sub agg_ports { return agg_ports_lag(@_) }
 
 1;
 __END__
@@ -235,13 +230,11 @@ Returns reference to hash.  Increments value of IID if port is to be ignored.
 
 Ignores loopback
 
-=item $h3c->fw_mac()
+=item C<agg_ports>
 
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
-
-=item $h3c->fw_port()
-
-Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+Returns a HASH reference mapping from slave to master port for each member of
+a port bundle on the device. Keys are ifIndex of the slave ports, Values are
+ifIndex of the corresponding master ports.
 
 =back
 

Info/Layer3/HP9300.pm

@@ -42,7 +42,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/IBMGbTor.pm

@@ -0,0 +1,407 @@
+# SNMP::Info::Layer3::IBMGbTor - SNMP Interface to IBM Rackswitch devices
+# $Id$
+#
+# Copyright (c) 2013 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::IBMGbTor;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::IBMGbTor::ISA
+    = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::IBMGbTor::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+
+    # LLDP MIBs not loaded to prevent possible unqualified namespace conflict
+    # with IBM definitions
+    'IBM-GbTOR-10G-L2L3-MIB' => 'lldpInfoRemoteDevicesLocalPort',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'temp' => 'hwTempSensors',
+    'fan'  => 'hwFanSpeed',
+
+    # Can't find the equivalent in IBM-GbTOR-10G-L2L3-MIB
+    # use a different strategy for lldp_sys_cap in hasLLDP()
+    #'lldp_sysname' => 'lldpLocSysName',
+    #'lldp_sysdesc' => 'lldpLocSysDesc',
+    #'lldp_sys_cap' => 'lldpLocSysCapEnabled',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+
+    # IBM-GbTOR-10G-L2L3-MIB::portInfoTable
+    'sw_duplex' => 'portInfoMode',
+
+    # Can't find the equivalent in IBM-GbTOR-10G-L2L3-MIB
+    # not currently used in LLDP class
+    #'lldp_lman_addr' => 'lldpLocManAddrIfId',
+
+    # IBM-GbTOR-10G-L2L3-MIB::lldpInfoPortTable
+    'lldp_port_status' => 'lldpInfoPortAdminStatus',
+
+    # IBM-GbTOR-10G-L2L3-MIB::lldpInfoRemoteDevicesTable
+    'lldp_rem_id_type'  => 'lldpInfoRemoteDevicesChassisSubtype',
+    'lldp_rem_id'       => 'lldpInfoRemoteDevicesSystemName',
+    'lldp_rem_pid_type' => 'lldpInfoRemoteDevicesPortSubtype',
+    'lldp_rem_pid'      => 'lldpInfoRemoteDevicesPortId',
+    'lldp_rem_desc'     => 'lldpInfoRemoteDevicesPortDescription',
+    'lldp_rem_sysname'  => 'lldpInfoRemoteDevicesSystemName',
+    'lldp_rem_sysdesc'  => 'lldpInfoRemoteDevicesSystemDescription',
+    'lldp_rem_sys_cap'  => 'lldpInfoRemoteDevicesSystemCapEnabled',
+
+    # IBM-GbTOR-10G-L2L3-MIB::lldpInfoRemoteDevicesManAddrTable
+    'lldp_rman_type' => 'lldpInfoRemoteDevicesManAddrSubtype',
+    'lldp_rman_addr' => 'lldpInfoRemoteDevicesManAddr',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+
+sub hasLLDP {
+    my $ibm = shift;
+
+    # We may be have LLDP, but nothing in lldpRemoteSystemsData Tables
+    # Look to see if LLDP Rx enabled on any port
+    my $lldp_cap = $ibm->lldp_port_status();
+
+    foreach my $if ( keys %$lldp_cap ) {
+        if ( $lldp_cap->{$if} =~ /enabledRx/i ) {
+            return 1;
+        }
+    }
+    return;
+}
+
+sub lldp_ip {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    my $rman_type = $ibm->lldp_rman_type($partial) || {};
+    my $rman_addr = $ibm->lldp_rman_addr($partial) || {};
+
+    my %lldp_ip;
+    foreach my $key ( keys %$rman_addr ) {
+        my $type = $rman_type->{$key};
+        next unless defined $type;
+        next unless $type eq 'ipV4';
+        if ( $key =~ /^(\d+)\./ ) {
+            $lldp_ip{$1} = $rman_addr->{$key};
+        }
+    }
+    return \%lldp_ip;
+}
+
+sub lldp_if {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $lldp_desc = $lldp->lldpInfoRemoteDevicesLocalPort($partial) || {};
+    my $i_descr   = $lldp->i_description()                          || {};
+    my $i_alias   = $lldp->i_alias()                                || {};
+    my %r_i_descr = reverse %$i_descr;
+    my %r_i_alias = reverse %$i_alias;
+
+    my %lldp_if;
+    foreach my $key ( keys %$lldp_desc ) {
+
+    # Cross reference lldpLocPortDesc with ifDescr and ifAlias to get ifIndex,
+    # prefer ifAlias over ifDescr since MIB says 'alias'.
+        my $desc = $lldp_desc->{$key};
+        next unless $desc;
+        my $port = $desc;
+
+    # If cross reference is successful use it, otherwise stick with
+    # lldpRemLocalPortNum
+        if ( exists $r_i_alias{$desc} ) {
+            $port = $r_i_alias{$desc};
+        }
+        elsif ( exists $r_i_descr{$desc} ) {
+            $port = $r_i_descr{$desc};
+        }
+
+        $lldp_if{$key} = $port;
+    }
+    return \%lldp_if;
+}
+
+sub lldp_platform {
+    my $ibm = shift;
+    my $partial = shift;
+
+    return $ibm->lldpInfoRemoteDevicesSystemDescription($partial);
+}
+
+sub i_ignore {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    my $interfaces = $ibm->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|lb|null)/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+sub i_duplex {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    return $ibm->sw_duplex($partial);
+}
+
+sub model {
+    my $ibm   = shift;
+    my $id    = $ibm->id();
+    my $descr = $ibm->description();
+    my $model = &SNMP::translateObj($id);
+
+    if ( $descr =~ /RackSwitch\s(.*)/ ) {
+        return $1;
+    }
+
+    return $model || $id;
+}
+
+sub os {
+    return 'ibm';
+}
+
+sub vendor {
+    return 'ibm';
+}
+
+sub os_ver {
+    my $ibm = shift;
+
+    return $ibm->agSoftwareVersion();
+}
+
+sub interfaces {
+    my $ibm     = shift;
+    my $partial = shift;
+
+    my $i_descr = $ibm->i_description($partial) || {};
+    my $i_name  = $ibm->i_name($partial)        || {};
+
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        $i_descr->{$iid} = $name
+            if $name =~ /^port\d+/i;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::IBMGbTor - SNMP Interface to IBM Rackswitch devices
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ibm = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $ibm->class();
+
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for IBM Rackswitch (formerly Blade Network Technologies)
+network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above.
+
+ my $ibm = new SNMP::Info::Layer3::IBMGbTor(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3;
+
+=item SNMP::Info::LLDP;
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<IBM-GbTOR-10G-L2L3-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ibm->model()
+
+Returns model type.  Attempts to pull model from device description.
+Otherwise checks $ibm->id() against the F<IBM-GbTOR-10G-L2L3-MIB>.
+
+=item $ibm->vendor()
+
+Returns 'ibm'
+
+=item $ibm->os()
+
+Returns 'ibm'
+
+=item $ibm->os_ver()
+
+Returns the software version
+
+(C<agSoftwareVersion>)
+
+=item $ibm->temp()
+
+(C<hwTempSensors>)
+
+=item $ibm->fan()
+
+(C<hwFanSpeed>)
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $ibm->hasLLDP()
+
+Is LLDP is active in this device?  
+
+Note:  LLDP may be active, but nothing in C<lldpRemoteSystemsData> Tables so
+the device would not return any useful topology information.
+
+Checks to see if at least one interface is enabled to receive LLDP packets.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $ibm->interfaces()
+
+Returns reference to hash of interface names to iids.
+
+=item $ibm->i_ignore()
+
+Returns reference to hash of interfaces to be ignored.
+
+Ignores interfaces with descriptions of tunnel, loopback, and null.
+
+=item $ibm->i_duplex()
+
+Returns reference to hash of interface link duplex status. 
+
+(C<portInfoMode>)
+
+=item $ibm->lldp_if()
+
+Returns the mapping to the SNMP Interface Table. Tries to cross reference 
+(C<lldpInfoRemoteDevicesLocalPort>) with (C<ifDescr>) and (C<ifAlias>)
+to get (C<ifIndex>).
+
+=item $ibm->lldp_ip()
+
+Returns remote IPv4 address.  Returns for all other address types, use
+lldp_addr if you want any return address type.
+
+=item $ibm->lldp_platform()
+
+Returns remote device system description.
+
+(C<lldpInfoRemoteDevicesSystemDescription>)
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Juniper.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -234,21 +234,6 @@ sub i_vlan_membership {
     return $i_vlan_membership;
 }
 
-# Use Q-BRIDGE-MIB for bridge forwarding tables
-sub fw_mac {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->qb_fw_mac($partial);
-}
-
-sub fw_port {
-    my $juniper  = shift;
-    my $partial = shift;
-
-    return $juniper->qb_fw_port($partial);
-}
-
 # Pseudo ENTITY-MIB methods
 
 # This class supports both virtual chassis (stackable) and physical chassis
@@ -678,25 +663,6 @@ IDs.  These are the VLANs which are members of the egress list for the port.
 
 =back
 
-=head2 Forwarding Table (C<dot1dTpFdbEntry>)
-
-=over 
-
-=item $juniper->fw_mac()
-
-Returns reference to hash of forwarding table MAC Addresses
-
-(C<dot1dTpFdbAddress>)
-
-=item $juniper->fw_port()
-
-Returns reference to hash of forwarding table entries port interface
-identifier (iid)
-
-(C<dot1dTpFdbPort>)
-
-=back 
-
 =head2 Pseudo F<ENTITY-MIB> information
 
 These methods emulate F<ENTITY-MIB> Physical Table methods using

Info/Layer3/Lantronix.pm

@@ -41,7 +41,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Microsoft.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, );
 

Info/Layer3/Mikrotik.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -50,17 +50,30 @@ $VERSION = '3.00_003';
 %GLOBALS = (
     %SNMP::Info::Layer3::GLOBALS,
     'hrSystemUptime' => 'hrSystemUptime',
+    'os_level'       => 'mtxrLicLevel',
     'os_ver'         => 'mtxrLicVersion',
+    'serial1'        => 'mtxrSystem.3.0',
+    'firmware'       => 'mtxrSystem.4.0',
+    'fan_type'       => 'mtxrHlActiveFan',
 );
 
-%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+);
 
-%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+);
 
 sub vendor {
     return 'mikrotik';
 }
 
+sub serial {
+    my $mikrotik = shift;
+    return $mikrotik->serial1;
+}
+
 sub model {
     my $mikrotik = shift;
     my $descr = $mikrotik->description() || '';
@@ -73,6 +86,18 @@ sub os {
     return 'routeros';
 }
 
+sub board_temp {
+    my $mikrotik = shift;
+    my $temp = $mikrotik->mtxrHlTemperature;
+    return $temp / 10.0;
+}
+
+sub cpu_temp {
+    my $mikrotik = shift;
+    my $temp = $mikrotik->mtxrHlProcessorTemperature;
+    return $temp / 10.0;
+}
+
 1;
 __END__
 
@@ -148,6 +173,23 @@ Tries to extract the device model from C<sysDescr>.
 
 Returns the value of C<mtxrLicVersion>.
 
+=item $mikrotik->os_level()
+
+Returns the value of RouterOS level C<mtxrLicLevel>
+
+=item $mikrotik->board_temp()
+=item $mikrotik->cpu_temp()
+
+Returns the appropriate temperature values
+
+=item $mikrotik->serial()
+
+Returns the device serial.
+
+=item $mikrotik->firmware()
+
+Returns the firmware version of hardware.
+
 =back
 
 =head2 Globals imported from SNMP::Info::Layer3

Info/Layer3/N1600.pm

@@ -41,7 +41,7 @@ use SNMP::Info::SONMP;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/NetSNMP.pm

@@ -40,7 +40,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Netscreen.pm

@@ -40,7 +40,7 @@ use SNMP::Info::IEEE802dot11;
 
 use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,
@@ -69,17 +69,17 @@ $VERSION = '3.00_003';
     ns_i_up          => 'nsIfStatus',
     ns_ip_table      => 'nsIfIp',
     ns_ip_netmask    => 'nsIfNetmask',
-    at_index         => 'nsIpArpIfIdx',
-    at_paddr         => 'nsIpArpMac',
-    at_netaddr       => 'nsIpArpIp',
     bp_index         => 'nsIfInfo',
+    std_at_paddr     => 'ipNetToMediaPhysAddress',
+    ns_at_paddr      => 'nsIpArpMac',
 );
 
 %MUNGE = (
     %SNMP::Info::Layer3::MUNGE,
     %SNMP::Info::IEEE802dot11::MUNGE,
-    'ns_i_mac' => \&SNMP::Info::munge_mac,
-    'at_paddr' => \&SNMP::Info::munge_mac,
+    'ns_i_mac'     => \&SNMP::Info::munge_mac,
+    'ns_at_paddr'  => \&SNMP::Info::munge_mac,
+    'std_at_paddr' => \&SNMP::Info::munge_mac,
 );
 
 sub layers {
@@ -345,30 +345,47 @@ sub _mac_map {
     return \%mac_map;
 }
 
+# Interfaces can have two addresses, we want to capture both the network
+# address and the management address
 sub ip_index {
     my $netscreen = shift;
 
-    my $ns_ip = $netscreen->ns_ip_table() || {};
+    my $ns_ip     = $netscreen->ns_ip_table() || {};
+    my $if_mng_ip = $netscreen->nsIfMngIp()   || {};
 
     my %ip_index = ();
     foreach my $iid ( keys %$ns_ip ) {
         $ip_index{ $ns_ip->{$iid} } = $iid if $ns_ip->{$iid} ne "0.0.0.0";
     }
+    foreach my $iid ( keys %$if_mng_ip ) {
+        $ip_index{ $if_mng_ip->{$iid} } = $iid
+            if $if_mng_ip->{$iid} ne "0.0.0.0";
+    }
     return \%ip_index;
 }
 
 sub ip_table {
     my $netscreen = shift;
 
-    my $ip_index = $netscreen->ip_index() || {};
+    my $ip_index  = $netscreen->ip_index()  || {};
+    my $if_mng_ip = $netscreen->nsIfMngIp() || {};
 
     my %ip_table = ();
     foreach my $iid ( keys %$ip_index ) {
-        $ip_table{$iid} = $iid;
+        my $mgmt_ip = $if_mng_ip->{$iid};
+
+        if ( defined $mgmt_ip && $mgmt_ip ne '0.0.0.0' ) {
+            $ip_table{$iid} = $mgmt_ip;
+        }
+        else {
+            $ip_table{$iid} = $iid;
+        }
     }
     return \%ip_table;
 }
 
+# There is only one netmask for the interface both network and management
+# addresses should have the same netmask
 sub ip_netmask {
     my $netscreen = shift;
 
@@ -461,6 +478,33 @@ sub i_80211channel {
     return \%i_80211channel;
 }
 
+sub at_index {
+    my $netscreen = shift;
+
+    my $std = $netscreen->ipNetToMediaIfIndex();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->nsIpArpIfIdx();
+}
+
+sub at_paddr {
+    my $netscreen = shift;
+
+    my $std = $netscreen->std_at_paddr();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->ns_at_paddr();
+}
+
+sub at_netaddr {
+    my $netscreen = shift;
+
+    my $std = $netscreen->ipNetToMediaNetAddress();
+    return $std if (ref {} eq ref $std and scalar keys %$std);
+
+    return $netscreen->nsIpArpIp();
+}
+
 1;
 
 __END__
@@ -710,6 +754,33 @@ identifier (IID).
 
 =back
 
+=head2 Arp Cache Table
+
+=over
+
+=item $netscreen->at_index()
+
+Returns reference to hash.  Maps ARP table entries to Interface IIDs 
+
+If the device doesn't support C<ipNetToMediaIfIndex>, this will try
+the proprietary C<nsIpArpIfIdx>.
+
+=item $netscreen->at_paddr()
+
+Returns reference to hash.  Maps ARP table entries to MAC addresses. 
+
+If the device doesn't support C<ipNetToMediaPhysAddress>, this will try
+the proprietary C<nsIpArpMac>.
+
+=item $netscreen->at_netaddr()
+
+Returns reference to hash.  Maps ARP table entries to IP addresses. 
+
+If the device doesn't support C<ipNetToMediaNetAddress>, this will try
+the proprietary C<nsIpArpIp>.
+
+=back
+
 =head3 Wireless Information
 
 =over 

Info/Layer3/Nexus.pm

@@ -1,6 +1,6 @@
 # SNMP::Info::Layer3::Nexus
 #
-# Copyright (c) 2012 Eric Miller
+# Copyright (c) 2014 Eric Miller
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
@@ -30,38 +30,23 @@
 package SNMP::Info::Layer3::Nexus;
 
 use strict;
+use warnings;
 use Exporter;
-use SNMP::Info::LLDP;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoImage;
-use SNMP::Info::CiscoPortSecurity;
-use SNMP::Info::CiscoConfig;
-use SNMP::Info::CiscoPower;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoStpExtensions;
-use SNMP::Info::CiscoVTP;
+use SNMP::Info::Layer3::CiscoSwitch;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
 # NOTE : Top-most items gets precedence for @ISA
 @SNMP::Info::Layer3::Nexus::ISA = qw/
-    SNMP::Info::CiscoVTP 
-    SNMP::Info::CiscoStpExtensions
-    SNMP::Info::LLDP
-    SNMP::Info::CDP 
-    SNMP::Info::CiscoImage
-    SNMP::Info::CiscoPortSecurity
-    SNMP::Info::CiscoConfig
-    SNMP::Info::CiscoPower
-    SNMP::Info::Layer3
-    Exporter
-/;
+	SNMP::Info::Layer3::CiscoSwitch
+	Exporter
+	/;
 
 @SNMP::Info::Layer3::Nexus::EXPORT_OK = qw//;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 # NOTE: Order creates precedence
 #       Example: v_name exists in Bridge.pm and CiscoVTP.pm
@@ -70,108 +55,132 @@ $VERSION = '3.00_003';
 # The @ISA order should be reverse of these orders.
 
 %MIBS = (
-    %SNMP::Info::Layer3::MIBS,
-    %SNMP::Info::CiscoPower::MIBS,
-    %SNMP::Info::CiscoConfig::MIBS,
-    %SNMP::Info::CiscoPortSecurity::MIBS,
-    %SNMP::Info::CiscoImage::MIBS,
-    %SNMP::Info::CDP::MIBS,
-    %SNMP::Info::LLDP::MIBS,
-    %SNMP::Info::CiscoStpExtensions::MIBS, 
-    %SNMP::Info::CiscoVTP::MIBS,
-    'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
+	%SNMP::Info::Layer3::CiscoSwitch::MIBS,
+	'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
 );
 
 %GLOBALS = (
-    %SNMP::Info::Layer3::GLOBALS,
-    %SNMP::Info::CiscoPower::GLOBALS,
-    %SNMP::Info::CiscoConfig::GLOBALS,
-    %SNMP::Info::CiscoPortSecurity::GLOBALS,
-    %SNMP::Info::CiscoImage::GLOBALS,
-    %SNMP::Info::CDP::GLOBALS,
-    %SNMP::Info::LLDP::GLOBALS,
-    %SNMP::Info::CiscoStpExtensions::GLOBALS,
-    %SNMP::Info::CiscoVTP::GLOBALS,
-    'mac' => 'dot1dBaseBridgeAddress',
+	%SNMP::Info::Layer3::CiscoSwitch::GLOBALS,
+	'mac' => 'dot1dBaseBridgeAddress',
 );
 
-%FUNCS = (
-    %SNMP::Info::Layer3::FUNCS,
-    %SNMP::Info::CiscoPower::FUNCS,
-    %SNMP::Info::CiscoConfig::FUNCS,
-    %SNMP::Info::CiscoPortSecurity::FUNCS,
-    %SNMP::Info::CiscoImage::FUNCS,
-    %SNMP::Info::CDP::FUNCS,
-    %SNMP::Info::LLDP::FUNCS,
-    %SNMP::Info::CiscoStpExtensions::FUNCS, 
-    %SNMP::Info::CiscoVTP::FUNCS,    
-);
+%FUNCS = ( %SNMP::Info::Layer3::CiscoSwitch::FUNCS, );
 
-
-%MUNGE = (
-    %SNMP::Info::Layer3::MUNGE,
-    %SNMP::Info::CiscoPower::MUNGE,
-    %SNMP::Info::CiscoConfig::MUNGE,
-    %SNMP::Info::CiscoPortSecurity::MUNGE,
-    %SNMP::Info::CiscoImage::MUNGE,         
-    %SNMP::Info::CDP::MUNGE,
-    %SNMP::Info::LLDP::MUNGE,
-    %SNMP::Info::CiscoStpExtensions::MUNGE, 
-    %SNMP::Info::CiscoVTP::MUNGE,    
-);
-
-sub cisco_comm_indexing { return 1; }
-
-sub vendor {
-    return 'cisco';
-}
+%MUNGE = ( %SNMP::Info::Layer3::CiscoSwitch::MUNGE, );
 
 sub os {
-    return 'nx-os';
+	return 'nx-os';
 }
 
 sub os_ver {
-    my $nexus = shift; 
-    my $descr = $nexus->description();
-    
-    return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
-    return $descr;
+	my $nexus = shift;
+	my $descr = $nexus->description();
+
+	return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
+	return $descr;
 }
 
 sub serial {
-    my $nexus = shift;
+	my $nexus = shift;
 
-    my $e_class = $nexus->e_class();
+	my $e_parent = $nexus->e_parent();
 
-    foreach my $iid ( keys %$e_class ) {
-        my $class = $e_class->{$iid} || '';
-        if ($class =~ /chassis/) {
-	    my $serial = $nexus->e_serial($iid);
-	    return $serial->{$iid};
+	foreach my $iid ( keys %$e_parent ) {
+		my $parent = $e_parent->{$iid};
+		if ( $parent eq '0' ) {
+			my $serial = $nexus->e_serial($iid);
+			return $serial->{$iid};
+		}
 	}
-    }    
-    return;
+	return;
 }
 
 # sysObjectID returns an IID to an entry in the CISCO-ENTITY-VENDORTYPE-OID-MIB.
 # Look it up and return it.
 sub model {
-    my $nexus = shift;
-    my $id    = $nexus->id();
+	my $nexus = shift;
+	my $id    = $nexus->id();
 
-    unless ( defined $id ) {
-        print
-            " SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
-            if $nexus->debug();
-        return;
-    }
+	unless ( defined $id ) {
+		print
+			" SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
+			if $nexus->debug();
+		return;
+	}
 
-    my $model = &SNMP::translateObj($id);
+	my $model = &SNMP::translateObj($id);
 
-    return $id unless defined $model;
+	return $id unless defined $model;
 
-    $model =~ s/^cevChassis//i;
-    return $model;
+	$model =~ s/^cevChassis//i;
+	return $model;
+}
+
+# Reported version 6.x of NX-OS doesn't use the IPv4 address as index
+# override methods in ipAddrTable
+sub ip_table {
+	my $nexus         = shift;
+	my $orig_ip_table = $nexus->orig_ip_table();
+
+	my %ip_table;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip = $orig_ip_table->{$iid};
+		next unless defined $ip;
+
+		$ip_table{$ip} = $ip;
+	}
+	return \%ip_table;
+}
+
+sub ip_index {
+	my $nexus         = shift;
+	my $orig_ip_table = $nexus->orig_ip_table();
+	my $orig_ip_index = $nexus->orig_ip_index();
+
+	my %ip_index;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip    = $orig_ip_table->{$iid};
+		my $index = $orig_ip_index->{$iid};
+
+		next unless ( defined $ip && defined $index );
+
+		$ip_index{$ip} = $index;
+	}
+	return \%ip_index;
+}
+
+sub ip_netmask {
+	my $nexus           = shift;
+	my $orig_ip_table   = $nexus->orig_ip_table();
+	my $orig_ip_netmask = $nexus->orig_ip_netmask();
+
+	my %ip_netmask;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip      = $orig_ip_table->{$iid};
+		my $netmask = $orig_ip_netmask->{$iid};
+
+		next unless ( defined $ip && defined $netmask );
+
+		$ip_netmask{$ip} = $netmask;
+	}
+	return \%ip_netmask;
+}
+
+sub ip_broadcast {
+	my $nexus             = shift;
+	my $orig_ip_table     = $nexus->orig_ip_table();
+	my $orig_ip_broadcast = $nexus->orig_ip_broadcast();
+
+	my %ip_broadcast;
+	foreach my $iid ( keys %$orig_ip_table ) {
+		my $ip        = $orig_ip_table->{$iid};
+		my $broadcast = $orig_ip_broadcast->{$iid};
+
+		next unless ( defined $ip && defined $broadcast );
+
+		$ip_broadcast{$ip} = $broadcast;
+	}
+	return \%ip_broadcast;
 }
 
 1;
@@ -190,14 +199,14 @@ Eric Miller
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $nexus = new SNMP::Info(
-                        AutoSpecify => 1,
-                        Debug       => 1,
-                        # These arguments are passed directly to SNMP::Session
-                        DestHost    => 'myswitch',
-                        Community   => 'public',
-                        Version     => 2
-                        ) 
-    or die "Can't connect to DestHost.\n";
+						AutoSpecify => 1,
+						Debug       => 1,
+						# These arguments are passed directly to SNMP::Session
+						DestHost    => 'myswitch',
+						Community   => 'public',
+						Version     => 2
+						) 
+	or die "Can't connect to DestHost.\n";
 
  my $class      = $nexus->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
@@ -215,23 +224,7 @@ after determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
-=item SNMP::Info::CiscoVTP
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoImage
-
-=item SNMP::Info::CiscoPortSecurity
-
-=item SNMP::Info::CiscoConfig
-
-=item SNMP::Info::CiscoPower
-
-=item SNMP::Info::CiscoStpExtensions
-
-=item SNMP::Info::LLDP
+=item SNMP::Info::Layer3::CiscoSwitch
 
 =back
 
@@ -247,25 +240,9 @@ after determining a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+See L<SNMP::Info::Layer3::CiscoSwitch/"Required MIBs"> for its own MIB
 requirements.
 
-See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
-
-See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
-
 =back
 
 =head1 GLOBALS
@@ -274,10 +251,6 @@ These are methods that return a scalar value from SNMP
 
 =over
 
-=item $nexus->vendor()
-
-Returns 'cisco'
-
 =item $nexus->os()
 
 Returns C<'nx-os'>
@@ -300,92 +273,56 @@ Removes C<'cevChassis'> for readability.
 
 C<dot1dBaseBridgeAddress>
 
-=item $nexus->cisco_comm_indexing()
+=back
 
-Returns 1.  Use vlan indexing.
+=head2 Overrides
+
+=head3 IP Address Table
+
+Each entry in this table is an IP address in use on this device.  Some 
+versions do not index the table with the IPv4 address in accordance with
+the MIB definition, these overrides correct that behavior.
+
+=over
+
+=item $nexus->ip_index()
+
+Maps the IP Table to the IID
+
+(C<ipAdEntIfIndex>)
+
+=item $nexus->ip_table()
+
+Maps the Table to the IP address
+
+(C<ipAdEntAddr>)
+
+=item $nexus->ip_netmask()
+
+Gives netmask setting for IP table entry.
+
+(C<ipAdEntNetMask>)
+
+=item $nexus->ip_broadcast()
+
+Gives broadcast address for IP table entry.
+
+(C<ipAdEntBcastAddr>)
 
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
+=head2 Globals imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
-
-=head2 Globals imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
+=head2 Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
 
-See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoImage
-
-See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
-
-See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+See documentation in L<SNMP::Info::Layer3::CiscoSwitch/"TABLE METHODS"> for
 details.
 
-=head2 Table Methods imported from SNMP::Info::CiscoConfig
-
-See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoPower
-
-See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
-
-See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
-
-=head2 Table Methods imported from SNMP::Info::LLDP
-
-See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
-
 =cut

Info/Layer3/PacketFront.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Passport.pm

@@ -43,7 +43,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS, %SNMP::Info::RapidCity::MIBS,
@@ -127,8 +127,8 @@ sub i_index {
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
         || (defined $model
-            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
-                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -145,7 +145,7 @@ sub i_index {
         }
     }
 
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_index = $passport->rc_cpu_ifindex($partial) || {};
         my $virt_ip = $passport->rc_virt_ip();
@@ -183,8 +183,8 @@ sub interfaces {
 
     if (!defined $partial
         || (defined $model
-            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
-                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -198,24 +198,24 @@ sub interfaces {
         my $index = $i_index->{$iid};
         next unless defined $index;
 
-        if ( ( $index == 1 ) and ( $model =~ /(86)/ ) ) {
+        if ( ( $index == 1 ) and ( $model =~ /^8[86]/ ) ) {
             $if{$index} = 'Cpu.Virtual';
         }
 
-        elsif ( ( $index == 192 ) and ( $model eq '8603' ) ) {
+        elsif ( ( $index == 192 ) and ( $model =~ /^8[86]03/ ) ) {
             $if{$index} = 'Cpu.3';
         }
 
-        elsif ( ( $index == 320 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $index == 320 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $if{$index} = 'Cpu.5';
         }
 
-        elsif ( ( $index == 384 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $index == 384 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $if{$index} = 'Cpu.6';
         }
 
-        elsif (( $index > 2000 and $model =~ /(86|83|81|16|VSP)/ )
-            or ( $index > 256 and $model =~ /(105|11[05]0|12[05])/ ) )
+        elsif (( $index > 2000 and $model =~ /^8[8631]|16|VSP/ )
+            or ( $index > 256 and $model =~ /^1[012][05]0/ ) )
         {
 
             my $v_index = $reverse_vlan{$iid};
@@ -256,8 +256,8 @@ sub i_mac {
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
         || (defined $model
-            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
-                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -276,7 +276,7 @@ sub i_mac {
         }
     }
 
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_mac = $passport->rc_cpu_mac($partial) || {};
         my $virt_ip = $passport->rc_virt_ip()         || '0.0.0.0';
@@ -330,8 +330,8 @@ sub i_description {
     # Get VLAN Virtual Router Interfaces
     if (!defined $partial
         || (defined $model
-            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
-                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -366,8 +366,8 @@ sub i_name {
 
     if (!defined $partial
         || (defined $model
-            && (  ( $partial > 2000 && $model =~ /(86|83|81|16|VSP)/ )
-                || ( $partial > 256 && $model =~ /(105|11[05]0|12[05])/ ) )
+            && (  ( $partial > 2000 && $model =~ /^8[8631]|16|VSP/ )
+                || ( $partial > 256 && $model =~ /^1[012][05]0/ ) )
         )
         )
     {
@@ -379,27 +379,27 @@ sub i_name {
     my %i_name;
     foreach my $iid ( keys %$i_index ) {
 
-        if ( ( $iid == 1 ) and ( $model =~ /(86)/ ) ) {
+        if ( ( $iid == 1 ) and ( $model =~ /^8[86]/ ) ) {
             $i_name{$iid} = 'CPU Virtual Management IP';
         }
 
-        elsif ( ( $iid == 192 ) and ( $model eq '8603' ) ) {
+        elsif ( ( $iid == 192 ) and ( $model =~ /^8[86]03/ ) ) {
             $i_name{$iid} = 'CPU 3 Ethernet Port';
         }
 
-        elsif ( ( $iid == 320 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $iid == 320 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $i_name{$iid} = 'CPU 5 Ethernet Port';
         }
 
-        elsif ( ( $iid == 384 ) and ( $model =~ /(8606|8610|8610co)/ ) ) {
+        elsif ( ( $iid == 384 ) and ( $model =~ /^8[86][10][06]/ ) ) {
             $i_name{$iid} = 'CPU 6 Ethernet Port';
         }
 
         elsif (
-            ( $iid > 2000 and defined $model and $model =~ /(86|83|81|16)/ )
+            ( $iid > 2000 and defined $model and $model =~ /^8[8631]|16|VSP/ )
             or (    $iid > 256
                 and defined $model
-                and $model =~ /(105|11[05]0|12[05])/ )
+                and $model =~ /^1[012][05]0/ )
             )
         {
             my $vlan_idx = $reverse_vlan{$iid};
@@ -433,12 +433,16 @@ sub ip_index {
     foreach my $ip ( keys %$ip_index ) {
         my $iid = $ip_index->{$ip};
         next unless defined $iid;
+        # Skip VSP default CPU addresses
+        next if ($ip =~ /^192\.168\.1\.1/);
+        # Skip default CPU addresses
+        next if ($ip =~ /^192\.168\.168\.16[89]/);
 
         $ip_index{$ip} = $iid;
     }
 
     # Only 8600 has CPU and Virtual Management IP
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_ip = $passport->rc_cpu_ip($partial) || {};
         my $virt_ip = $passport->rc_virt_ip($partial);
@@ -447,6 +451,8 @@ sub ip_index {
         foreach my $cid ( keys %$cpu_ip ) {
             my $c_ip = $cpu_ip->{$cid};
             next unless defined $c_ip;
+            # Skip default CPU addresses
+            next if ($c_ip =~ /192\.168\.168\.16[89]/);
 
             $ip_index{$c_ip} = $cid;
         }
@@ -467,6 +473,10 @@ sub ip_netmask {
 
     my %ip_index;
     foreach my $iid ( keys %$ip_mask ) {
+        # Skip VSP default CPU addresses
+        next if ($iid =~ /^192\.168\.1\./);
+        # Skip default CPU addresses
+        next if ($iid =~ /^192\.168\.168\.16[89]/);
         my $mask = $ip_mask->{$iid};
         next unless defined $mask;
 
@@ -474,7 +484,7 @@ sub ip_netmask {
     }
 
     # Only 8600 has CPU and Virtual Management IP
-    if ( defined $model and $model =~ /(86)/ ) {
+    if ( defined $model and $model =~ /^8[86]/ ) {
 
         my $cpu_ip    = $passport->rc_cpu_ip($partial)    || {};
         my $cpu_mask  = $passport->rc_cpu_mask($partial)  || {};
@@ -485,6 +495,8 @@ sub ip_netmask {
         foreach my $iid ( keys %$cpu_mask ) {
             my $c_ip = $cpu_ip->{$iid};
             next unless defined $c_ip;
+            # Skip default CPU addresses
+            next if ($c_ip =~ /192\.168\.168\.16[89]/);
             my $c_mask = $cpu_mask->{$iid};
             next unless defined $c_mask;
 
@@ -510,7 +522,7 @@ sub root_ip {
     my $sonmp_topo_ip   = $passport->sonmp_topo_ip();
 
     # Only 8600 and 1600 have CLIP or Management Virtual IP
-    if ( defined $model and $model =~ /(86|16|VSP)/ ) {
+    if ( defined $model and $model =~ /^8[86]|16|VSP/ ) {
 
         # Return CLIP (CircuitLess IP)
         foreach my $iid ( keys %$rc_ip_type ) {
@@ -560,7 +572,7 @@ sub index_factor {
 
     # Older Accelar models use base 16 instead of 64
     $index_factor = 16
-        if ( defined $model and $model =~ /(105|11[05]0|12[05])/ );
+        if ( defined $model and $model =~ /^1[012][05]0/ );
     return $index_factor;
 }
 
@@ -583,9 +595,86 @@ sub bp_index {
     foreach my $iid ( keys %$if_index ) {
         $bp_index{$iid} = $iid;
     }
+
+    # If we have MLT's map them to the designated port
+    my $trunks = $passport->rc_mlt_index;
+    my $dps    = $passport->rc_mlt_dp || {};
+
+    if ( ref {} eq ref $trunks and scalar keys %$trunks ) {
+        foreach my $m ( keys %$trunks ) {
+            my $m_idx = $trunks->{$m};
+            next unless $m_idx;
+            my $i_idx = $dps->{$m} ? $dps->{$m} : $m_idx;
+            $bp_index{$m_idx} = $i_idx;
+        }
+    }
+
     return \%bp_index;
 }
 
+# We have devices which support BRIDGE-MIB, Q-BRIDGE-MIB, and RAPID-CITY
+# exclusively.  Use standards-based first and fall back to RAPID-CITY.
+sub fw_mac {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_mac($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    my $qb_fw_port = $passport->rcBridgeTpFdbPort($partial);
+    my $qb_fw_mac  = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _rc_fdbtable_index($idx);
+        $qb_fw_mac->{$idx} = $mac;
+    }
+    return $qb_fw_mac;
+}
+
+sub fw_port {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_port($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    return $passport->rcBridgeTpFdbPort($partial);
+}
+
+sub fw_status {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::fw_status($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+    
+    return $passport->rcBridgeTpFdbStatus($partial);
+}
+
+sub qb_fw_vlan {
+    my $passport  = shift;
+    my $partial   = shift;
+
+    my $qb = $passport->SUPER::qb_fw_vlan($partial);
+    return $qb if (ref {} eq ref $qb and scalar keys %$qb);
+
+    my $qb_fw_port = $passport->rcBridgeTpFdbPort($partial);
+    my $qb_fw_vlan = {};
+    foreach my $idx ( keys %$qb_fw_port ) {
+        my ( $fdb_id, $mac ) = _rc_fdbtable_index($idx);
+        $qb_fw_vlan->{$idx} = $fdb_id;
+    }
+    return $qb_fw_vlan;
+}
+
+# break up the rcBridgeTpFdbEntry INDEX into FDB ID and MAC Address.
+sub _rc_fdbtable_index {
+    my $idx    = shift;
+    my @values = split( /\./, $idx );
+    my $fdb_id = shift(@values);
+    return ( $fdb_id, join( ':', map { sprintf "%02x", $_ } @values ) );
+}
+
+
 # Pseudo ENTITY-MIB methods
 
 sub e_index {
@@ -613,7 +702,7 @@ sub e_index {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_type() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -683,7 +772,7 @@ sub e_descr {
 
     my $model = $passport->model();
     my $rc_ps = $passport->rc_ps_detail() || {};
-    my $rc_ch = $passport->chassis();
+    my $rc_ch = $passport->chassis() || '';
     $rc_ch =~ s/a//;
 
     my %rc_e_descr;
@@ -701,7 +790,7 @@ sub e_descr {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_type() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -769,7 +858,7 @@ sub e_type {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_type() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -842,7 +931,7 @@ sub e_name {
             $rc_e_name{$iid} = "Card $slot, MDA $mod";
         }
         elsif ( defined $model
-            and $model =~ /(105|11[05]0|12[05])/
+            and $model =~ /^1[012][05]0/
             and $iid   =~ /1$/ )
         {
             $rc_e_name{$iid} = "Card $slot";
@@ -878,7 +967,7 @@ sub e_hwver {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_rev() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -953,7 +1042,7 @@ sub e_serial {
     }
 
     # Older Accelars use RAPID-CITY::rcCardTable
-    if ( defined $model and $model =~ /(105|11[05]0|12[05])/ ) {
+    if ( defined $model and $model =~ /^1[012][05]0/ ) {
         my $rc_c_t = $passport->rc_c_serial() || {};
         foreach my $idx ( keys %$rc_c_t ) {
             next unless $idx;
@@ -1240,6 +1329,40 @@ problems with F<BRIDGE-MIB>
 
 =back
 
+=head2 Forwarding Table
+
+These methods utilize, in order; F<Q-BRIDGE-MIB>, F<BRIDGE-MIB>, and
+F<RAPID-CITY> to obtain the forwarding table information.
+
+=over 
+
+=item $passport->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses
+
+(C<dot1qTpFdbAddress>), (C<dot1dTpFdbAddress>), (C<rcBridgeTpFdbAddress>)
+
+=item $passport->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+(C<dot1qTpFdbPort>), (C<dot1dTpFdbPort>), (C<rcBridgeTpFdbPort>)
+
+=item $passport->fw_status()
+
+Returns reference to hash of forwarding table entries status
+
+(C<dot1qTpFdbStatus>), (C<dot1dTpFdbStatus>), (C<rcBridgeTpFdbStatus>)
+
+=item $passport->qb_fw_vlan()
+
+Returns reference to hash of forwarding table entries VLAN ID
+
+(C<dot1qFdbId>), (C<rcBridgeTpFdbVlanId>)
+
+=back
+
 =head2 Pseudo F<ENTITY-MIB> information
 
 These devices do not support F<ENTITY-MIB>.  These methods emulate Physical

Info/Layer3/Pf.pm

@@ -41,7 +41,7 @@ use SNMP::Info::LLDP;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Pica8.pm

@@ -0,0 +1,191 @@
+# SNMP::Info::Layer3::Pica8
+#
+# Copyright (c) 2013 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Pica8;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Pica8::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Pica8::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    return 'Pica8';
+}
+
+sub os {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /(\S+)\s+Platform Software/i );
+    return;
+}
+
+sub os_ver {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /Software version ([\d\.]+)/i );
+    return;
+}
+
+sub model {
+    my $pica8 = shift;
+    my $descr   = $pica8->description();
+
+    return $1 if ( $descr =~ /Hardware model (P-\d{4})/i );
+    return;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Pica8 - SNMP Interface to L3 Devices, Pica8
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $pica8 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $pica8->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Pica8 devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<PICA-PRIVATE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $pica8->vendor()
+
+Returns 'Pica8'
+
+=item $pica8->model()
+
+Returns the model name extracted from C<sysDescr>.
+
+=item $pica8->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $pica8->os_ver()
+
+Returns the OS version extracted from C<sysDescr>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=cut

Info/Layer3/SonicWALL.pm

@@ -36,7 +36,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,

Info/Layer3/Steelhead.pm

@@ -0,0 +1,216 @@
+# SNMP::Info::Layer3::Steelhead
+#
+# Copyright (c) 2013 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Steelhead;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Steelhead::ISA
+    = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Steelhead::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.16';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'STEELHEAD-MIB' => 'serialNumber',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    # Fully qualified to remove ambiguity of 'model'
+    'rb_model' => 'STEELHEAD-MIB::model',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+);
+
+sub layers {
+    return '01001100';
+}
+
+sub vendor {
+    return 'riverbed';
+}
+
+sub model {
+    my $riverbed = shift;
+
+    my $model = $riverbed->rb_model() || '';
+    
+    if ($model =~ /^(\d+)/) {
+        return $1;
+    }
+    return $model;
+}
+
+sub os {
+    return 'steelhead';
+}
+
+sub os_ver {
+    my $riverbed = shift;
+    
+    my $ver = $riverbed->systemVersion() || '';
+
+    if ( $ver =~ /(\d+[\.\d]+)/ ) {
+        return $1;
+    }
+    
+    return $ver;
+}
+
+sub serial {
+    my $riverbed = shift;
+    
+    return $riverbed->serialNumber();
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Steelhead - SNMP Interface to Riverbed Steelhead WAN
+optimization appliances.
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $riverbed = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $riverbed->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Riverbed Steelhead WAN optimization appliances.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $riverbed = new SNMP::Info::Layer3::Steelhead(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+F<STEELHEAD-MIB>
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $riverbed->vendor()
+
+Returns 'riverbed'
+
+=item $riverbed->model()
+
+Returns the chassis model.
+
+(C<STEELHEAD-MIB::model>)
+
+=item $riverbed->os()
+
+Returns 'steelhead'
+
+=item $riverbed->os_ver()
+
+Returns the software version extracted from (C<systemVersion>).
+
+=item $riverbed->serial()
+
+Returns the chassis serial number.
+
+(C<serialNumber>)
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $riverbed->layers()
+
+Returns 01001100.  Steelhead does not support bridge MIB, so override reported
+layers.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Sun.pm

@@ -39,7 +39,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, );
 

Info/Layer3/Tasman.pm

@@ -41,7 +41,7 @@ use SNMP::Info::MAU;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::Layer3::MIBS,

Info/Layer3/Timetra.pm

@@ -40,7 +40,7 @@ use SNMP::Info::Layer3;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = ( %SNMP::Info::Layer3::MIBS, 'TIMETRA-GLOBAL-MIB' => 'timetraReg', );
 

Info/Layer7.pm

@@ -39,7 +39,7 @@ use SNMP::Info;
 
 use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-$VERSION = '3.00_003';
+$VERSION = '3.16';
 
 %MIBS = (
     %SNMP::Info::MIBS,