version bump - 3.03

Known issue with Aruba AOS 7.2.0.0: nodes on "trusted" LAN ports in "access"
mode point to non-existing bp_index values; they will be mapped to the wrong
interface or not be mapped to an interface at all.

COPYRIGHT

@@ -1,5 +1,5 @@
 All code from version 0.7 on
-Copyright (c) 2003,2004 Max Baker
+Copyright (c) 2003-2009 Max Baker and SNMP::Info Developers
 All rights reserved.
 
 Original Code

ChangeLog

@@ -1,5 +1,445 @@
 SNMP::Info - Friendly OO-style interface to Network devices using SNMP.
-ChangeLog $Id$
+
+version 3.03 (2013-07-11)
+
+    [BUG FIXES]
+
+    * Add missing =back to POD (A. Hartmaier)
+
+version 3.02 (2013-07-08)
+
+    [ENHANCEMENTS]
+
+    * Properly pull os_ver from Netgear GS series switches.
+    * Support Alcatel devices with layer3 features.
+    * Identify Cisco Aironet 1140 APs as Layer2::Aironet
+    * LAN switch support added to Layer3::Aruba class
+    * [RT#86725] - Identify Cisco Catalyst 3850 as Layer3::C6500 (C. Causer)
+
+version 3.01 (2013-04-13)
+
+    [API Changes]
+
+    * The methods c_ip(), c_if(), c_port(), c_id(), and c_platform() now
+      represent common topology methods and will try to return a combined
+      hash of data from all L2 topology protocols either running on the
+      device or specified in the method call.  The topology specific methods
+      have been been prefixed with the protocol name in lowercase so that
+      they can be called directly, sonmp_ip(), cdp_ip(), etc.
+    * L2::Bay and L2::Foundry have been removed from the distribution.  Both
+      classes were depreciated and all functionality is available through
+      L2::Baystack and L3::Foundry. 
+
+    [NEW FEATURES]
+
+    * [3160037] - Support _raw suffix on methods to skip munging
+    * [3185391] - Support for F5 devices in new class L3::F5
+    * [3323814] - Arp support for Netscreen (David Baldwin)
+    * [3323821] - Support for Netscreen w/ WLAN (eg SSG5) (David Baldwin)
+    * [3599277] - Q-BRIDGE Support to collect VLAN in macsuck
+    * [3033731] - Alcatel-Lucent OmniSwich AMAP Support in new AMAP class
+    * [3598896] - Lantronix device support (J R Binks)
+    * [3598337] - Lantronix SLC support
+    * Support for Cisco ASA in L3::CiscoASA (Kraus/Hartmaier/Bernstein)
+    * Support for Avaya VSP 9000 series in L3::Passport
+    * Support for Avaya VSP 7000 series in L2::Baystack
+    * Support Avaya (Trapeze) Wireless Controllers in new class L2::NWSS2300
+    * Support Juniper (Trapeze) Wireless Controllers in new class L2::Trapeze
+    * Support for newer Radware Alteon ADC switches 4408/4416/5412/5224 and
+      older AWS 2000/3000 series in existing L3::AlteonAD
+    * Support for H3C & HP A-series in new class L3::H3C
+    * Support for Citrix Netscaler appliances in new class L7::Netscaler
+    * New configuration option IgnoreNetSNMPConf will ignore Net-SNMP
+      configuration files on object initialization
+    * Two new utilities added in t/util to assist in developing device
+      support; make_snmpdata.pl gathers SNMP data (snmpwalk) in a format that
+      can be used with test_class_mocked.pl which mocks an SNMP agent to
+      enable testing with no network access to a device.
+
+    [ENHANCEMENTS]
+
+    * UNIVERSAL::can() now works with dynamic methods 
+    * Dynamically generated methods are added to symbol table to avoid
+      AUTOLOAD on subsequent calls
+    * L2::Airespace now supports 802.11n client tx rates
+    * L2::Airespace now reports AP Ethernet MAC as port MAC for radio ports
+    * CiscoStats improvements to determine os versions, eg IOS XE ver on Sup7L-E
+    * CiscoStats now reports 'ios-xe' if the device runs IOS XE (used to be 'ios')
+    * Improved support of XOS based Extreme devices
+
+    [BUG FIXES]
+
+    * [3564920] - lldp_if gives wrong data for Enterasys
+
+version 2.11 (2012-12-09)
+
+    [BUG FIXES]
+
+    * Add fall-back for sysDescr on Force10
+
+version 2.10 (2012-12-08)
+
+    [NEW FEATURES]
+
+    * Support for Force10 devices (W. Bulley)
+
+version 2.09 (2012-11-28)
+
+    [NEW FEATURES]
+
+    * New method i_ssidmac() to get BSSID's from AP's with initial support
+      in L2::Aironet and Airespace classes
+    * Support for Avaya Secure Routers in new class L3::Tasman
+    * Add EDP and LLDP L2 Topology to L3::Extreme 
+    * [3185393] Support for Juniper SSL VPN in new class L7::Neoteris
+    * [3381027] Support for Cisco Nexus in new class L3::Nexus   
+    * [1424336] Support for Extreme Discovery Protocol (EDP)
+    
+    [ENHANCEMENTS]
+
+    * [3017571] Add LLDP support for NetSNMP device class (begemot) 
+    * [3418918] Extreme devices now report OS as either extremeware or xos
+    * [2809045] Strip preceding netscreen from model name in L3::Netscreen
+    * [] Classify Linksys 2024 as L3::Dell (Rogier Krieger)
+    
+    [BUG FIXES]
+    
+    * Fixed logic to return cached data for table methods when available and
+      not a partial fetch
+    * Fix typo in PoD for Bridge.pm and CiscoConfig.pm (William Bulley)
+    * Fix/improve IPv6 neighbor cache handling, especially for Cisco Nexus
+
+version 2.08 (2012-07-15)
+
+    [NEW FEATURES]
+
+    * Basic support for APC UPS devices
+    * [2993691] Support for SonicWALL devices in new class L3::SonicWALL (phishphreek)
+    * [2996795] Support for Kentrox devices in new class L2::Kentrox (phishphreek)
+    * [] Basic support for Blue Coat proxy devices in new class L3::BlueCoatSG (jeroenvi)
+    * [] Support Cisco 6500 / Sup2T in L3::C6500 class (jeroenvi)
+
+    [ENHANCEMENTS]
+
+    * Pseudo ENTITY-MIB methods added to L3::Juniper for hardware information
+    * Add method to report current transmit power of the radio interface,
+      dot11_cur_tx_pwr_mw(), in Airespace class 
+    * [3085411] Activate L3 properties for Netgear GSM7224v2 (phishphreek)
+    * [3085413] SNMP OIDs for Netgear Serial and OS Ver (phishphreek)
+    * [3286549] Dell LLDP Support (Nico Giefing)
+    * [3469527] Netgear LLDP Support (Nic Bernstein)
+    * [3472052] moduleSerialNumber support for Cisco Stack (Slava)
+    * [3523320] Better VLAN support in Juniper class (Web Bulley)
+    * [3532261] LLDP support in C6500 and related (Carlos Vicente)
+    * [3538949] Updated switch models in L2::HP (jeroenvi)
+
+    [BUG FIXES]
+
+    * Get OS version for Juniper devices not reporting in sysDescr
+    * Correct base MAC reporting for Juniper devices
+    * Correct reporting of SSID broadcast status in Airespace class
+    * [3541442] Change L2::Catalyst port names to what is reported in CDP
+    * [2132349] Add an additional check to get Foundry OS version
+    * [2929883] [3413999] LLDP interface mapping issue
+    * [3297786] LLDP TimeMark component defaults to zero (David Baldwin)
+    * [2988163] Detect Juniper SSG firewalls as Layer3::Netscreen (R. Kerr)
+    * [3317739] Fix for Baystack without POE on stack member 1 (David Baldwin)
+    * [2037444] os_ver fails on some Extreme versions (Robert Kerr)
+    * [2980789] Fix root_ip to try OSPF RouterID first (Brian De Wolf)
+    * [2986858] Fix the patch from this ticket (Oliver Gorwits)
+    * [3136084] Rename Allied Telesyn to Allied Telesis (Oliver Gorwits)
+    * [3268104] CiscoVTP.pm i_vlan_membership() array bounds (Michael Sanderson)
+    * [3497004] Clarify POD description of default values (a2w)
+    * [3502533] Layer2/Baystack interface indexes > 513 (Robert Nyqvist)
+
+version 2.06 (2011-09-28)
+
+    [NEW FEATURES]
+
+    * Support for PacketFront devices in new class L3::PacketFront
+    * Support for Mikrotik devices in new class L3::Mikrotik
+    * Support for HP VirtualConnect switches in new class L2::HPVC
+    * Support for ADSL-LINE-MIB in new class AdslLine
+
+    [ENHANCEMENTS]
+
+    * POD clarification on i_speed() munging by Info.pm
+    * Added i_stack_status method that can be used for finding the parent
+      interface for e.g. ADSL interface speed determination
+
+    [BUG FIXES]
+
+    * [3344843] Fix returning serial() and os_ver() for web-managable HP
+      switches, introduced by HP/HP4000 class split, reported by J R Binks
+    * [2809033] Put L2-only Cisco blade switches in L3::C6500
+    * [3408506] Fix uninitialized value in IPv6 when neighbor state is 
+      incomplete (Michael Borgelt)
+
+version 2.05 (2011-06-23)
+    + Fix broken function call in L2::Aironet
+    + Promote L2::Aruba to L3::Aruba, as Aruba devices can be L3 entities and
+      provide L3 information.
+
+version 2.04 (2011-03-31)
+    + Support for older HP switch models moved to new L2::HP4000 class
+    + Fix VLAN changing in L2::HP and L2::HP4000 classes
+    * Updated model lists in HP classes
+    + [2980782] Added L3::CiscoFWSM for Cisco Firewall Services Modules
+      (Brian De Wolf)
+    + Added L3::Pf for FreeBSD PFSense Firewalls (max)
+    * Added specific functions for neighbor mgmt addresses to CDP class
+    * Implemented os_bin() method in CiscoStats 
+    + [2980787] Fix for C1900 bp_index not containing interfaces.
+      (Brian De Wolf)
+    + [2599795] Added vendor_i_type() method to HP and HP4000 clases
+    + [2688801] Minor modification for obscure Proxim/Orinoco device
+      (jrbinks)
+    + [3051443] Add PoE measured power per port to Cisco, Extrme and HP 
+      classes (jeroenvi)
+    * Minor tweaks to support devices without sysServices
+    * Added Cisco CBS3xxx blade switches to L3::C6500
+    * Fix for FWSMs not being detected properly.  Special thanks goes to
+      Jukka Pirhonen for pointing it out. (Brian De Wolf)
+    + Added support for IPv6 to physical address mapping
+    * Added ME340x to L3::C3550
+    * Added new ProCurve models to HP class
+    * Fixed i_speed_raw not returning raw values (Alexander Hartmaier)
+
+version 2.01 (06/12/09)
+    + Added CiscoStpExtensions Class (Carlos Vicente)
+    + Added Layer3::Arista (fenner)
+    + [2020353] Added L3::Altiga for Cisco (Altiga) VPN3000 Concentrators
+                (Jeroen van Ingen)
+
+    * Fixed RFC1213-MIB vs IF-MIB collision in ifOperStatus
+    * Updated test_class.pl for better debug info and relative path
+    * Add cisco vendor detection by OID in Layer3.pm (Sam Stickland)
+    * Fix CaSe of EtherLike-MIB in EtherLike.pm (Alexander Hartmaier)
+    * Added Cisco FWSM to L3::Cisco
+    * Added s222_rp to L3::C6500
+    * Added CIGESM to L2::C2900
+    * Added Airespace WLC to L2::Airespace
+    * Updated POD and DeviceMatrix quite a bit
+    * Added ENTITY-MIB to CiscoStats for better model handling above
+    * Fix networkaddress handling in LLDP-MIB
+    * Added CiscoConfig to L2::Aironet, L3::C3550 classes
+    * Better SSID capabilities for L2::Aironet
+    * Fix CDP vs LLDP in c_id() for HP Class
+    * test_class.pl improvements
+
+version 2.00 (08/01/08)
+    + Support for Alcatel-Lucent OmniSwitch via L3::AlcatelLucent
+    + Support for Alcatel-Lucent Service Router via L3::Timetra
+    + Support for Alcatel-Lucent OmniAccess via L2::Aruba
+
+    * Silence warnings in MAU due to uninitialized variables 
+
+version 1.09 (07/22/08) - Beta/developer release
+    + Added support for HP ProCurve Foundry OEM switches, such as the 9300
+      series, in new class L3::HP9300 (contributions from Douglas McKeown and
+      Ivan Auger)
+    + Added support for CISCO-PAE-MIB in CiscoPortSecurity (Kesy)
+    + Support for D-Link devices through L3::Dell
+    + Support for Linksys SRW2048 through L3::Dell
+    + Support for IBM BladeCenter 4-Port GB Ethernet Switch Module through
+      L3::Dell (Alex Kramarov)
+    + Support for newer Nortel Alteon switches and Nortel BladeCenter Switch
+      Modules in L3::AlteonAD
+    + Support for Cisco 1250 series through L2::Aironet
+    + Updates to fan, power supply, and serial number methods in
+      L2::HP (Jeroen van Ingen)
+    + Use Cisco Client Association MIBs for Aironet client reporting
+      via fw_mac
+    + Support VLANs on Aironet
+    + Get the proper radio MAC address from aironet in MBSS mode
+    + Additional wireless statistics from Aironet
+    + Add support to specify MIB to resolve leaf names conflicts in
+      %GLOBALS and %FUNCS.
+    + Added munge_port_list() and modify_port_list() methods to assist in
+      working with PortList objects. 
+    + Added set_multi() method to enable a SNMP set command on several new
+      values in one request.  Required for complex set operations
+      on some agents.
+    + Infrastructure for SNMPv3 support:
+        + Save the SecName passed into the constructor
+        + Create an update() function, which replaces the underlying
+          SNMP session using different parameters.
+        + Return the SecName instead of community from snmp_comm() when using
+          SNMPv3.
+
+    * L2::HP now isa Layer3 instead of Layer2 to support arpnip
+      (Dudley Freeman)
+    * Silence warnings from Cisco devices which don't return values for
+      extended VLAN range (1024-4096)
+    * Documentation coverage, spelling, and syntax updates
+    * set_i_pvid(), set_i_vlan(), set_add_i_vlan_tagged(),
+      set_remove_i_vlan_tagged() removed from Bridge and HP classes due to
+      incompatibility across devices.
+
+version 1.07 (11/26/07) - Beta/developer release
+
+version 1.05 (11/25/07) - CVS only. No official release
+    + Added support for LLDP in new class LLDP (contributions from Bernhard
+      Augenstein)
+    + Added device specific support for LLDP in L2::HP, L2::Baystack,
+      L3::Enterasys and L3::Foundry
+    + Added support for Enterasys devices as new class L3::Enterasys 
+    + Added support for Dell PowerConnect switches as new class L3::Dell
+    + Added basic support for generic routers running Microsoft Windows OS
+      as new class L3::Microsoft (begemot)
+    + Added basic support for Sun routers as new class L3::Sun (begemot)
+    + Added basic support for Juniper NetScreen devices as new class
+      L3::Netscreen (Kent Hamilton)
+    + Added support for Cyclades terminal servers as new class L1::Cyclades
+    + Added support for Cisco (Airespace) wireless controllers as new class
+      L2::Airespace
+    + Added support for Nortel Ethernet Routing Switch 2500 series and
+      Business Ethernet Switches (David Sieb<65>rger)
+    + Update of L3::Foundry to support all Foundry devices including newer
+      switches.  Depreciate L2::Foundry.
+    + Added generic device type detection using IANA assigned enterpise
+      number extracted from sysObjectID
+    + Added ifDiscards and other missing entries from IF-MIB::ifEntry (Greg King)
+    + Added CGESM devices to L2::C2900 class (Alexander Hartmaier)
+    + Added support for dual speed 10/100 hubs and i_speed() in L1::Bayhub
+    + Added i_ssidlist(), i_ssidbcast(), and i_80211channel() methods to
+      L2::Aruba, Airespace, and L2::NAP222x classes
+    + New class IEEE802dot11 class for generic standards based wireless AP
+      support to include i_ssidlist()and i_80211channel() methods.
+    + L2::Orinoco inherits from new IEEE802dot11 for i_ssidlist()and
+      i_80211channel() support. 
+    + Added new VLAN methods i_pvid(), i_vlan_membership(), set_i_pvid(),
+      set_i_vlan(), set_add_i_vlan_tagged(), set_remove_i_vlan_tagged() to
+      Bridge, CiscoVTP, Extreme, HP, and RapidCity classes.
+    + Added set_i_speed_admin() method to RapidCity class,
+    + Added set_i_duplex_admin() method to RapidCity class,
+    + Added OSPF Neighbor Tables, SF Patch 1577918 to Layer 3 (Andrew Herrick)
+    + Added CiscoConfig class, SF Patch 1555001 (Justin Hunter)
+    + Enable load_ methods for %GLOBALS and MIB Leaf node names.
+    + Enable dynamic methods in AUTOLOAD with MIB Leaf node names for loaded
+      MIBs without definition in %FUNCS or %GLOBALS.  Single instance mib leafs
+      will be treated as a GLOBAL and returna scalar while mib leafs which
+      reside in a table will be treated as a FUNC and return a reference to a
+      hash.
+    + Enable load_ methods for %GLOBALS and MIB Leaf node names.
+    + Add loop detect option and code for getnext table column walks.
+    + Add Layer3::NetSNMP for Net-SNMP-based hosts, part of
+      SF patch 1557529 (Bradley Baetz).
+    + Add EIGRP Neighbor Tables to L3::Cisco SF Patch 1577927 (Andrew Herrick)
+    + Additions to CiscoQOS and CiscoStats (Alexander Hartmaier)
+    + Emulate ENTITY-MIB Physical Table methods for devices which don't
+      have ENTITY-MIB support in Airespace, Bayhub, Baystack, BayRS,
+      NortelStack, and Passport classes.
+    + Enable use of MIB Leaf node names in SNMP sets.
+    + Add POWER-ETHERNET-MIB and CISCO-POWER-ETHERNET-EXT-MIB support.
+
+    * Fix for bug where an SNMP error in any operation would cause subsequent
+      table get operations to fail while using the same session, originally
+      identified by Nicolai Petri.
+    * Enable single instance partial table fetches (Alexander Hartmaier)
+    * Enable partial table fetches in overriden table methods (Justin Hunter)
+    * Allow partial table fetches with load_ methods.
+    * Fixed vlan trunk port handling bug in L2:HP (Michael Robbert)
+    * Correct bp_port() definition in Bridge class (Reported by Nicolai Petri)
+    * Remove port security definitions from CiscoStack and move into new class
+      CiscoPortSecurity.  Needed to support devices such a L3::C4000 which
+      support CISCO-PORT-SECURITY-MIB, but not CISCO-STACK-MIB.
+      (Reported by Prakash RudraRaju)
+    * Correct port numbering for Nortel 8110, 1100, 1150 in L3:Passport
+      (Reported by David Pinkoski)
+    * Documentation updates
+    * Translate OIDs returned by Entity MIB e_type
+    * Modify inheritance to use Cisco classes before generic classes
+    * Create e_index method in ENTITY-MIB to facilitate emulation methods in
+      other classes as entPhysicalIndex is not-accessible.
+    * Only return MAC from munge_mac() if it actually is a MAC. Fix for
+      netdisco where device would not be inserted in DB due to malformed MAC.
+    * Enable SUPER class calls to find autoloaded methods (Bernhard Augenstein)
+    * Clear attribute cache on sucessful SNMP set.
+    * Improve accuracy of operational and administrative duplex reporting on
+      devices using CiscoStack.
+    * All i_type() methods now use standard IANAifType values.
+    * Report bridge groups (VLANs) in L2::C1900.
+    * Turn on bulkwalk for C6500.  Users with buggy OS versions can turn
+      it off when creating the object.
+    * c_ip() now attempts to return only IPV4 addresses, use c_addr() for all
+      address types.
+
+version 1.04 (07/08/06)
+    +  Added C1130 and C1240 to L2::Aironet (Ralf Gross)
+    +  Added detection for Cisco 2960, 2940, 3400 w/ MetroBase
+    +  Added generic L2::Cisco Class
+    *  Corrected detection for Cisco Supervisor Engine 2 and 32 (IOS).  
+    *  Fixed warnings in CiscoStack
+    *  Updated ProCurve HP device detection for newer firmwares
+
+version 1.03 (04/14/06) - Beta/developer release
+    * Use ipNetToMedia table instead of atTable for ARP
+    * Remove CiscoStack from Layer3::C4000
+    * Fixed bug in MAU class when polling devices without MAU-MIB support 
+
+version 1.01 (04/08/06) - Beta/developer release
+    + Change version numbers to X.XX format.  Odd releases are beta
+      or developer only releases.  Even are official releases.
+
+version 1.0 (04/07/06) - CVS only. No official release
+    + Added Interface FlowControl status to CiscoStack (Nicolai Petri)
+    + Added CiscoImage class (Matthew Tuttle)
+    + Added C1200 and C350 IOS devices to L2::Aironet (Matthew Tuttle)
+    + Added support for Foundry IronWare and gave L3::Foundry CPR
+    + Added support for Foundry EdgeIrons as new class L2::Foundry
+    + Added BulkWalk and BulkRepeaters options to new()
+    + Added DebugSNMP option to new()
+    + Added CISCO-ENTITY-VENDORTYPE-OID-MIB,CISCO-PRODUCTS-MIB,CISCO-STACK-MIB
+      to CiscoStats.pm for model()
+    + Check for bulkwalk_no() method
+    + Added Entity.pm to L3 and L2 classes per N. Petri's suggestion.
+    + Added support for Passport/Accelar 1100 and 1200 series in L3::Passport
+    + Added support for Passport/Accelar 8100 series in L3::Passport
+    + Added support for Passport 1600 series as new class, L3::N1600
+    + Added support for Extreme Alpine and Summit switches as new class
+      L3:Extreme (Mike Hunter and Eric Miller)
+    + Added support for Aruba wireless switches (Eric Miller and Brian Chow)
+    + Added support for Nortel 2700 series (Airespace) wireless switches
+    + Added support for Synoptics hubs as new class L1:S3000
+    + Added Cisco QOS and RTT classes (Alexander Hartmaier)
+    + Added BGP Peer Table to L3 class (Carlos Vicente)
+    + Added ipforwarding status to Info base class (Carlos Vicente)
+    + Added STP port state to Bridge class (Alexander Barthel)
+    + Added L3 support (arpnip) to Baystack class for routing capable switches
+    + Added set_i_duplex_admin() and set_i_speed_admin() to C2900 class
+      (Justin Hunter)
+    + Added set_i_duplex_admin() and set_i_speed_admin() to CiscoStack class
+    + CDP added to Aironet class
+    + Added Juniper class
+    + Added support for Catalyst 4000 and 4500, get admin. duplex
+      and speed properly
+    + Added i_speed_high(), which i_speed() uses if needed to support
+      interfaces >4Gbps
+
+    * More error checking in  _load_attr() around bulkwalk code
+    * Minor warning fix in L3::Aironet::os_ver()
+    * Abstracted remaining Cisco stuff from L3 to L3::Cisco
+    * Removed all Cisco stuff from L2
+    * Expanded Entity.pm to cover the whole ENTITY-MIB and improved docs.
+    * changed all refs to $DEBUG to $self->debug() for reentrant code
+    * [ 1111284 ] Parameters not being set with AutoSpecify - fixed.
+    * Turned off BULKWALK for C1900 and C6500 classes.
+    * Added exception handling for V2 ENDOFMIBVIEW
+    * Fix in SONMP when topology not enabled
+    * Fix in L3::Passport root_ip()
+    * Fix in L3::Passport bp_index() some devices not returning complete index.
+    * Enable set_i_up_admin() in Bayhub
+    * Recognize new Nortel model names in Baystack and Passport classes
+    * Orinoco class should now recognize more models
+    * Cleanup model recognition in Baystack class, recognize more models
+    * Modify Catalyst class to use CISCO-STACK-MIB for brige port index mapping
+      some devices having problems returning complete index from BRIDGE-MIB
+    * Check root ip for reachability before assignment
+    * HP class should recognize more models
+    * Fix in HP class for models not returning full bp_index
+    * [ 1436103 ] L2::Aironet devices weren't getting their model
+      translated properly
 
 verison 0.9 (11/15/04)
     + ** Added full Nortel/Bay/BayStack support 
@@ -14,7 +454,8 @@ verison 0.9 (11/15/04)
     + Added i_lastchange() per suggestion of Nicolai Petri
     + Added BULKWALK patch by Bradley Baetz - This should
           greatly speed up requests on SNMPv2c devices.
-    + Added MibDirs option to new() to allow specifying non-system MIB directories.
+    + Added MibDirs option to new() to allow specifying non-system MIB
+      directories.
 
     * Added C3560s to the C3550 class. Thanks to Nicolai.
     * Fixed Bug where older Cisco's would append nulls to certain
@@ -22,7 +463,7 @@ verison 0.9 (11/15/04)
     * Changed so a failed _global() call is cached so it won't retry
       an error over and over again if the same global is used.
     * Added check in _set() to see if data came from sub or FUNCS/GLOBALS
-        Fails if came from sub.
+      Fails if came from sub.
 
 version 0.8 (03/21/04)
     + Added Q-BRIDGE-MIB support to SNMP::Info::Bridge
@@ -69,8 +510,10 @@ version 0.4 (04/29/03)
     * Added clear_cache() method
     * Added NO_SUCH support for snmpget (TABLE) calls to get SNMP MIB II data 
       from SNMP Version 1 devices.
-    * Methods load_all() and all() have changed their return value. Sorry but the API had to change.
-    * New object methods snmp_comm(), snmp_ver(), store(), class(), nosuch() to make it more OO happy.
+    * Methods load_all() and all() have changed their return value. Sorry but
+      the API had to change.
+    * New object methods snmp_comm(), snmp_ver(), store(), class(), nosuch()
+      to make it more OO happy.
     * Globals are now cached
     * Added new argument 'AutoSpecify' to new() to auto-connect with subclass 
       detected in device_type()
@@ -83,8 +526,8 @@ version 0.4 (04/29/03)
 
 version 0.3 (03/06/03)
     * Fixed HP model() warning
-    * Added error checking for responses of NOSUCHOBJECT and NOSUCHINSTANCE in _global
-      and _load_attr
+    * Added error checking for responses of NOSUCHOBJECT and NOSUCHINSTANCE
+      in _global and _load_attr
     * Added more debugging
     * Added info and munging for c_capabilities in SNMP::Info::CD
       Thanks to Martin Lorensen <martin /at- lorensen.dk>
@@ -101,7 +544,8 @@ version 0.2 (02/19/03)
     * Added Spanning Tree Protocol (STP) methods to SNMP::Info::Bridge
     * Removed HP Specific MIBS in SNMP::Info::Layer2 and cleaned up model()
     * Added poke for Bay 450 Switches 
-    * Mapped HP Part Numbers to model numbers J4812A => 2512 in SNMP::Info::Layer2::HP
+    * Mapped HP Part Numbers to model numbers J4812A => 2512 in
+      SNMP::Info::Layer2::HP
      
 version 0.1 (12/30/02)
     * Initial Release

DEVELOP

@@ -0,0 +1,29 @@
+SNMP::Info Developer Guidelines
+
+Coding Guidelines:
+    - tab-width of 4, no tab characters
+    - keep POD documentation up-to-date
+    - always update ChangeLog before committing
+    - always update DeviceMatrix.txt before committing
+    - check-in required mibs to netdisco-mibs and release new package if needed
+
+Release and Testing Instructions: 
+    - Please see misc/RELEASE in Netdisco
+      ( http://netdisco.cvs.sourceforge.net/viewvc/netdisco/misc/RELEASE?view=markup )
+      and follow all testing and release guidelines
+
+FAQ:
+    - Do I have to update the version number and timestamp in modified files before committing? 
+    -> No.  These are RCS tags that are automatically updated by CVS when you commit
+
+    - Should I add changes at the top of the ChangeLog?
+    -> Yes. The changelog is created one commit at a time.  If there isn't a
+        section for the current version, then add one at the top and put your
+        changes after.  You can leave the date field for the release empty (). 
+
+    - What should I change the $VERSION to?
+    -> If you are the first person to get to a file after a release, update it
+       to either  release++ or "release++ dash cvs".   
+       Example: File is marked 2.01, change it to 2.02-cvs with your new changes.
+       Example: File is marked 2.02-cvs,  no change until packaging for release when the -cvs is removed.
+       TODO: Is there still an odd/even scheme as introduced by Eric?

Info/AMAP.pm

@@ -0,0 +1,341 @@
+# SNMP::Info::AMAP
+#
+# Copyright (c) 2013 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::AMAP;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::LLDP::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::LLDP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS
+    = ( 'ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB' => 'aipAMAPRemDeviceType', );
+
+%GLOBALS = (
+
+);
+
+%FUNCS = (
+
+    # EXTREME-EDP-MIB::extremeEdpTable
+    'amap_rem_sysname' => 'aipAMAPRemHostname',
+);
+
+%MUNGE = ( 'amap_rem_sysname' => \&SNMP::Info::munge_null, );
+
+sub hasAMAP {
+    my $amap = shift;
+
+    my $amap_ip = $amap->aipAMAPIpAddr() || {};
+
+    return 1 if ( scalar( keys %$amap_ip ) );
+
+    return;
+}
+
+# Break up the aipAMAPhostsTable INDEX into MAC and IP address.
+sub _hosts_table_index {
+    my $idx  = shift;
+    my @oids = split( /\./, $idx );
+    my $mac  = join( '.', splice( @oids, 0, 6 ) );
+
+    return ( $mac, join( '.', @oids ) );
+}
+
+# Break up the aipAMAPportConnectionTable INDEX and return MAC
+sub _conn_table_mac {
+    my $idx       = shift;
+    my @oids      = split( /\./, $idx );
+    my $local_idx = shift @oids;
+    my $mac       = join( '.', splice( @oids, 0, 6 ) );
+
+    return ($mac);
+}
+
+# Since we need to get IP Addresses from the aipAMAPhostsTable which has
+# a different index (MAC, IP) than the aipAMAPportConnectionTable which holds
+# the remote device details we create a combined index and skip any
+# IPs which have an address of 0.0.0.0.  Would like to include only one
+# address since they should all originate from the same device, but we don't
+# know if they would all be reachable from the network management application.
+#
+# We don't inplement partials since this is private index function
+sub _amap_index {
+    my $amap = shift;
+
+    my $amap_ip    = $amap->aipAMAPIpAddr()    || {};
+    my $amap_rport = $amap->aipAMAPLocalPort() || {};
+
+    my %amap_index;
+    foreach my $key ( keys %$amap_ip ) {
+        my ( $mac, $ip ) = _hosts_table_index($key);
+
+        next if ( $ip eq '0.0.0.0' );
+        next unless $ip;
+
+        foreach my $idx ( keys %$amap_rport ) {
+            my $c_mac = _conn_table_mac($idx);
+
+            if ( $mac eq $c_mac ) {
+                my $index = "$idx.$ip";
+                $amap_index{$index} = $index;
+            }
+        }
+    }
+    return \%amap_index;
+}
+
+# Break up _amap_index INDEX into local index, MAC, remote index, and
+# IP address
+sub _amap_index_parts {
+    my $idx       = shift;
+    my @oids      = split( /\./, $idx );
+    my $local_idx = shift @oids;
+    my $mac       = join( '.', splice( @oids, 0, 6 ) );
+    my $rem_idx   = shift @oids;
+
+    return ( $local_idx, $mac, $rem_idx, join( '.', @oids ) );
+}
+
+sub amap_if {
+    my $amap = shift;
+
+    my $index  = $amap->_amap_index()         || {};
+    my $if_idx = $amap->aipAMAPLocalIfindex() || {};
+
+    my %amap_if;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $if_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$if_key/ ) {
+            my $if = $if_idx->{$if_key};
+            $amap_if{$key} = $if;
+        }
+    }
+
+    return \%amap_if;
+}
+
+sub amap_ip {
+    my $amap = shift;
+
+    my $index = $amap->_amap_index() || {};
+
+    my %amap_ip;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+
+        # MIB says should only be IPv4
+        next unless ( $ip =~ /\d+(\.\d+){3}/ );
+        $amap_ip{$key} = $ip;
+    }
+    return \%amap_ip;
+}
+
+sub amap_port {
+    my $amap = shift;
+
+    my $index      = $amap->_amap_index()      || {};
+    my $amap_rport = $amap->aipAMAPLocalPort() || {};
+    my $amap_rslot = $amap->aipAMAPLocalSlot() || {};
+
+    my %amap_port;
+    foreach my $key ( sort keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $p_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$p_key/ ) {
+            my $port = $amap_rport->{$p_key};
+            my $slot = $amap_rslot->{$p_key} || 0;
+            next unless $port;
+            $amap_port{$key} = defined $slot ? "$slot\/$port" : $port;
+        }
+    }
+    return \%amap_port;
+}
+
+sub amap_id {
+    my $amap = shift;
+
+    my $index     = $amap->_amap_index()      || {};
+    my $amap_name = $amap->amap_rem_sysname() || {};
+
+    my %amap_name;
+    foreach my $key ( sort keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $id_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$id_key/ ) {
+            my $name = $amap_name->{$id_key} || 0;
+            next unless $name;
+            $amap_name{$key} = $name;
+        }
+    }
+    return \%amap_name;
+}
+
+sub amap_platform {
+    my $amap = shift;
+
+    my $index              = $amap->_amap_index()          || {};
+    my $amap_topo_platform = $amap->aipAMAPRemDeviceType() || {};
+
+    my %amap_platform;
+    foreach my $key ( keys %$index ) {
+        my ( $local_idx, $mac, $rem_idx, $ip ) = _amap_index_parts($key);
+        my $pf_key = "$local_idx.$mac.$rem_idx";
+
+        if ( $key =~ /^$pf_key/ ) {
+            my $platform = $amap_topo_platform->{$pf_key};
+            next unless $platform;
+            $amap_platform{$key} = $platform;
+        }
+    }
+    return \%amap_platform;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::AMAP - SNMP Interface to Alcatel Mapping Adjacency Protocol (AMAP)
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ my $amap = new SNMP::Info ( 
+                             AutoSpecify => 1,
+                             Debug       => 1,
+                             DestHost    => 'router', 
+                             Community   => 'public',
+                             Version     => 2
+                           );
+
+ my $class = $amap->class();
+ print " Using device sub class : $class\n";
+
+ $hasamap   = $amap->hasAMAP() ? 'yes' : 'no';
+
+ # Print out a map of device ports with LLDP neighbors:
+ my $interfaces    = $amap->interfaces();
+ my $amap_if       = $amap->amap_if();
+ my $amap_ip       = $amap->amap_ip();
+ my $amap_port     = $amap->amap_port();
+
+ foreach my $amap_key (keys %$amap_ip){
+    my $iid           = $amap_if->{$amap_key};
+    my $port          = $interfaces->{$iid};
+    my $neighbor      = $amap_ip->{$amap_key};
+    my $neighbor_port = $amap_port->{$amap_key};
+    print "Port : $port connected to $neighbor / $neighbor_port\n";
+ }
+
+=head1 DESCRIPTION
+
+SNMP::Info::AMAP is a subclass of SNMP::Info that provides an object oriented 
+interface to Alcatel Mapping Adjacency Protocol (AMAP) information through
+SNMP.
+
+AMAP is a Layer 2 protocol that allows a network device to advertise its
+identity and capabilities on the local network providing topology information.
+
+Create or use a device subclass that inherits this class.  Do not use
+directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB>
+
+=back
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $amap->hasAMAP()
+
+Is AMAP is active in this device?  
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $amap->amap_id()
+
+Returns the string value used to identify the remote system.
+
+=item $amap->amap_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item  $amap->amap_ip()
+
+Returns remote IPv4 addresses.  Note: AMAP returns all IP addresses associated
+with the remote device.  It would be preferable to include only one address
+since they should all originate from the same device, but amap_ip() can not 
+determine if all addresses are reachable from the network management
+application therefore all addresses are returned and the calling application
+must determine which address to use and if they are in fact from the same
+device.
+
+=item $amap->amap_port()
+
+Returns remote port ID
+
+=item $amap->amap_platform()
+
+Returns remote platform ID
+
+=back
+
+=cut

Info/AdslLine.pm

@@ -0,0 +1,172 @@
+# SNMP::Info::AdslLine
+#
+# Copyright (c) 2009 Alexander Hartmaier
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::AdslLine;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::AdslLine::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::AdslLine::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( 'ADSL-LINE-MIB' => 'adslLineType' );
+
+%GLOBALS = ();
+
+%FUNCS = (
+    # ADSL-LINE-MIB::adslAtucChanTable
+    'adsl_atuc_interleave_delay'    => 'adslAtucChanInterleaveDelay',
+    'adsl_atuc_curr_tx_rate'        => 'adslAtucChanCurrTxRate',
+    'adsl_atuc_prev_tx_rate'        => 'adslAtucChanPrevTxRate',
+    'adsl_atuc_crc_block_len'       => 'adslAtucChanCrcBlockLength',
+    
+    # ADSL-LINE-MIB::adslAturChanTable
+    'adsl_atur_interleave_delay'    => 'adslAturChanInterleaveDelay',
+    'adsl_atur_curr_tx_rate'        => 'adslAturChanCurrTxRate',
+    'adsl_atur_prev_tx_rate'        => 'adslAturChanPrevTxRate',
+    'adsl_atur_crc_block_len'       => 'adslAturChanCrcBlockLength',
+);
+
+%MUNGE = ();
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::AdslLine - SNMP Interface to the F<ADSL-LINE-MIB>
+
+=head1 AUTHOR
+
+Alexander Hartmaier
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $info->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::AdslLine is a subclass of SNMP::Info that provides 
+information about the adsl interfaces of a device.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+none.
+
+=head2 Required MIBs
+
+=over
+
+=item F<ADSL-LINE-MIB>
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBALS
+
+=over
+
+=item none
+
+=back
+
+=head1 TABLE METHODS
+
+=head2 ATUC channel table (C<adslAtucChanTable>)
+
+This table provides one row for each ATUC channel.
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
+is equal to adslInterleave(124) or adslFast(125).
+
+=over
+
+=item $info->adsl_atuc_interleave_delay()
+
+(C<adslAtucChanInterleaveDelay>)
+
+=item $info->adsl_atuc_curr_tx_rate()
+
+(C<adslAtucChanCurrTxRate>)
+
+=item $info->adsl_atuc_prev_tx_rate()
+
+(C<adslAtucChanPrevTxRate>)
+
+=item $info->adsl_atuc_crc_block_len()
+
+(C<adslAtucChanCrcBlockLength>)
+
+=back
+
+=head2 ATUR channel table (C<adslAturChanTable>)
+
+This table provides one row for each ATUR channel.
+ADSL channel interfaces are those C<ifEntries> where C<ifType>
+is equal to adslInterleave(124) or adslFast(125).
+
+=over
+
+=item $info->adsl_atur_interleave_delay()
+
+(C<adslAturChanInterleaveDelay>)
+
+=item $info->adsl_atur_curr_tx_rate()
+
+(C<adslAturChanCurrTxRate>)
+
+=item $info->adsl_atur_prev_tx_rate()
+
+(C<adslAturChanPrevTxRate>)
+
+=item $info->adsl_atur_crc_block_len()
+
+(C<adslAturChanCrcBlockLength>)
+
+=back
+
+=cut

Info/CDP.pm

@@ -1,149 +1,163 @@
 # SNMP::Info::CDP
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Changes since Version 0.7 Copyright (c) 2004 Max Baker 
-# All rights reserved.  
+# Changes since Version 0.7 Copyright (c) 2004 Max Baker
+# All rights reserved.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::CDP;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
-use Carp;
 
-@SNMP::Info::CDP::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::CDP::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::CDP::EXPORT_OK = qw//;
 
-use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MIBS_V1 %MUNGE $INIT/;
-# Debug
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT/;
+
+$VERSION = '3.03';
 
 # Five data structures required by SNMP::Info
-$INIT = 0;
-%MIBS    = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' );
-%MIBS_V1 = ( 'CISCO-CDP-MIB-V1SMI' => 'cdpGlobalRun' );
+%MIBS = ( 'CISCO-CDP-MIB' => 'cdpGlobalRun' );
+
 # Notice we dont inherit the default GLOBALS and FUNCS
 # only the default MUNGE.
 %GLOBALS = (
-            'cdp_run'      => 'cdpGlobalRun',
-            'cdp_interval' => 'cdpGlobalMessageInterval',
-            'cdp_holdtime' => 'cdpGlobalHoldTime',
-            'cdp_id'       => 'cdpGlobalDeviceId',
-           );
+    'cdp_run'      => 'cdpGlobalRun',
+    'cdp_interval' => 'cdpGlobalMessageInterval',
+    'cdp_holdtime' => 'cdpGlobalHoldTime',
+    'cdp_gid'       => 'cdpGlobalDeviceId',
+);
 
-%FUNCS  = (
-            'c_index'        => 'cdpCacheIfIndex',
-            'c_proto'        => 'cdpCacheAddressType',
-            'c_ip'           => 'cdpCacheAddress',
-            'c_ver'          => 'cdpCacheVersion',
-            'c_id'           => 'cdpCacheDeviceId',
-            'c_port'         => 'cdpCacheDevicePort',
-            'c_platform'     => 'cdpCachePlatform',
-            'c_capabilities' => 'cdpCacheCapabilities',
-            'c_domain'       => 'cdpCacheVTPMgmtDomain',
-            'c_vlan'         => 'cdpCacheNativeVLAN',
-            'c_duplex'       => 'cdpCacheDuplex'
-          );
+%FUNCS = (
+    'cdp_index'        => 'cdpCacheIfIndex',
+    'cdp_proto'        => 'cdpCacheAddressType',
+    'cdp_addr'         => 'cdpCacheAddress',
+    'cdp_ver'          => 'cdpCacheVersion',
+    'cdp_id'           => 'cdpCacheDeviceId',
+    'cdp_port'         => 'cdpCacheDevicePort',
+    'cdp_platform'     => 'cdpCachePlatform',
+    'cdp_capabilities' => 'cdpCacheCapabilities',
+    'cdp_domain'       => 'cdpCacheVTPMgmtDomain',
+    'cdp_vlan'         => 'cdpCacheNativeVLAN',
+    'cdp_duplex'       => 'cdpCacheDuplex',
+    'cdp_power'        => 'cdpCachePowerConsumption',
+    'cdp_pri_mgmt_type'=> 'cdpCachePrimaryMgmtAddrType',
+    'cdp_pri_mgmt_addr'=> 'cdpCachePrimaryMgmtAddr',
+    'cdp_sec_mgmt_type'=> 'cdpCacheSecondaryMgmtAddrType',
+    'cdp_sec_mgmt_addr'=> 'cdpCacheSecondaryMgmtAddr',
+);
 
 %MUNGE = (
-          'c_capabilities' => \&munge_caps,
-          'c_platform'     => \&munge_null,
-          'c_domain'       => \&munge_null,
-          'c_port'         => \&munge_null,
-          'c_id'           => \&munge_null,
-          'c_ver'          => \&munge_null,
-          'c_ip'           => \&SNMP::Info::munge_ip
-         );
+    'cdp_capabilities' => \&SNMP::Info::munge_caps,
+    'cdp_platform'     => \&SNMP::Info::munge_null,
+    'cdp_domain'       => \&SNMP::Info::munge_null,
+    'cdp_port'         => \&SNMP::Info::munge_null,
+    'cdp_id'           => \&SNMP::Info::munge_null,
+    'cdp_ver'          => \&SNMP::Info::munge_null,
+    'cdp_ip'           => \&SNMP::Info::munge_ip,
+    'cdp_power'        => \&munge_power,
 
-# munge_null() - removes nulls (\0)
-sub munge_null {
-    my $text = shift || return;
-    
-    $text =~ s/\0//g;
-    return $text;
+);
+
+sub munge_power {
+    my $power = shift;
+    my $decimal = substr( $power, -3 );
+    $power =~ s/$decimal$/\.$decimal/;
+    return $power;
 }
 
-sub munge_caps {
-    my $caps = shift;
-    return undef unless defined $caps;
-
-    my $bits = substr(unpack("B*",$caps),-7);
-    return $bits;
-    
-    
-}
 sub hasCDP {
     my $cdp = shift;
 
     my $ver = $cdp->{_version};
 
-
     # SNMP v1 clients dont have the globals
-    if (defined $ver and $ver == 1){
-        my $c_ip = $cdp->c_ip();
+    if ( defined $ver and $ver == 1 ) {
+        my $cdp_ip = $cdp->cdp_ip();
+
         # See if anything in cdp cache, if so we have cdp
-        return 1 if (defined $c_ip and scalar(keys %$c_ip)) ;
-        return undef;
+        return 1 if ( defined $cdp_ip and scalar( keys %$cdp_ip ) );
+        return;
     }
-    
+
     return $cdp->cdp_run();
 }
 
-sub c_if {
-    my $cdp  = shift;
+sub cdp_if {
+    my $cdp = shift;
 
     # See if by some miracle Cisco implemented the cdpCacheIfIndex entry
-    my $c_index     = $cdp->c_index();
-    return $c_index if defined $c_index;
+    my $cdp_index = $cdp->cdp_index();
+    return $cdp_index if defined $cdp_index;
 
     # Nope, didn't think so. Now we fake it.
-    my $c_ip = $cdp->c_ip();
-    unless (defined $c_ip){
-        $cdp->{error} = "SNMP::Info::CDP::c_if() - Device doesn't have c_ip() data.  Can't fake c_index()";
-        $DEBUG and carp($cdp->error(1));
-        return undef;
+    my $cdp_ip = $cdp->cdp_ip();
+    unless ( defined $cdp_ip ) {
+        $cdp->error_throw(
+            "SNMP::Info::CDP:cdp_if() - Device doesn't have cdp_ip() data.  Can't fake cdp_index()"
+        );
+        return;
     }
 
-    my %c_if;
-    foreach my $key (keys %$c_ip){
-      next unless defined $key;
-      my $iid = $key;
-      # Truncate .1 from cdp cache entry
-      $iid =~ s/\.\d+$//;
-      $c_if{$key} = $iid;
+    my %cdp_if;
+    foreach my $key ( keys %$cdp_ip ) {
+        next unless defined $key;
+        my $iid = $key;
+
+        # Truncate .1 from cdp cache entry
+        $iid =~ s/\.\d+$//;
+        $cdp_if{$key} = $iid;
     }
 
-    return \%c_if;
+    return \%cdp_if;
+}
+
+sub cdp_ip {
+    my $cdp     = shift;
+    my $partial = shift;
+
+    my $cdp_addr  = $cdp->cdp_addr($partial)  || {};
+    my $cdp_proto = $cdp->cdp_proto($partial) || {};
+
+    my %cdp_ip;
+    foreach my $key ( keys %$cdp_addr ) {
+        my $addr  = $cdp_addr->{$key};
+        my $proto = $cdp_proto->{$key};
+        next unless defined $addr;
+        next if ( defined $proto and $proto ne 'ip' );
+
+        my $ip = join( '.', unpack( 'C4', $addr ) );
+        $cdp_ip{$key} = $ip;
+    }
+    return \%cdp_ip;
 }
 
 1;
@@ -151,11 +165,11 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::CDP - Perl5 Interface to Cisco Discovery Protocol (CDP) using SNMP
+SNMP::Info::CDP - SNMP Interface to Cisco Discovery Protocol (CDP) using SNMP
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -174,15 +188,15 @@ Max Baker (C<max@warped.org>)
 
  # Print out a map of device ports with CDP neighbors:
  my $interfaces = $cdp->interfaces();
- my $c_if       = $cdp->c_if();
- my $c_ip       = $cdp->c_ip();
- my $c_port     = $cdp->c_port();
+ my $cdp_if       = $cdp->cdp_if();
+ my $cdp_ip       = $cdp->cdp_ip();
+ my $cdp_port     = $cdp->cdp_port();
 
- foreach my $cdp_key (keys %$c_ip){
-    my $iid           = $c_if->{$cdp_key};
+ foreach my $cdp_key (keys %$cdp_ip){
+    my $iid           = $cdp_if->{$cdp_key};
     my $port          = $interfaces->{$iid};
-    my $neighbor      = $c_ip->{$cdp_key};
-    my $neighbor_port = $c_port->{$cdp_key};
+    my $neighbor      = $cdp_ip->{$cdp_key};
+    my $neighbor_port = $cdp_port->{$cdp_key};
     print "Port : $port connected to $neighbor / $neighbor_port\n";
  }
 
@@ -191,10 +205,12 @@ Max Baker (C<max@warped.org>)
 SNMP::Info::CDP is a subclass of SNMP::Info that provides an object oriented 
 interface to CDP information through SNMP.
 
-CDP is a Layer 2 protocol that supplies topology information of devices that also speak CDP, 
-mostly switches and routers.  CDP is implemented in Cisco and some HP devices.
+CDP is a Layer 2 protocol that supplies topology information of devices that
+also speak CDP, mostly switches and routers.  CDP is implemented in Cisco and
+some HP devices.
 
-Create or use a device subclass that inherits this class.  Do not use directly.
+Create or use a device subclass that inherits this class.  Do not use
+directly.
 
 Each device implements a subset of the global and cache entries. 
 Check the return value to see if that data is held by the device.
@@ -207,7 +223,7 @@ None.
 
 =over
 
-=item CISCO-CDP-MIB
+=item F<CISCO-CDP-MIB>
 
 =back
 
@@ -227,30 +243,31 @@ Accounts for SNMP version 1 devices which may have CDP but not cdp_run()
 
 =item $cdp->cdp_run()
 
-Is CDP enabled on this device?  Note that a lot of Cisco devices that implement
-CDP don't implement this value. @#%$!
+Is CDP enabled on this device?  Note that a lot of Cisco devices that
+implement CDP don't implement this value. @#%$!
 
-(B<cdpGlobalRun>)
+(C<cdpGlobalRun>)
 
 =item $cdp->cdp_interval()
 
 Interval in seconds at which CDP messages are generated.
 
-(B<cdpGlobalMessageInterval>)
+(C<cdpGlobalMessageInterval>)
 
 =item $cdp->cdp_holdtime()
 
 Time in seconds that CDP messages are kept. 
 
-(B<cdpGlobalHoldTime>)
+(C<cdpGlobalHoldTime>)
 
-=item  $cdp->cdp_id() 
+=item  $cdp->cdp_gid() 
 
 Returns CDP device ID.  
 
-This is the device id broadcast via CDP to other devices, and is what is retrieved from remote devices with $cdp->id().
+This is the device id broadcast via CDP to other devices, and is what is
+retrieved from remote devices with $cdp->id().
 
-(B<cdpGlobalDeviceId>)
+(C<cdpGlobalDeviceId>)
 
 =back
 
@@ -263,7 +280,7 @@ to a hash.
 
 =over
 
-=item $cdp->c_capabilities()
+=item $cdp->cdp_capabilities()
 
 Returns Device Functional Capabilities.  Results are munged into an ascii
 binary string, 7 digits long, MSB.  Each digit represents a bit from the
@@ -277,115 +294,148 @@ From L<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#1884
 
 =item (0x40) - Provides level 1 functionality.
 
-=item (0x20) - The bridge or switch does not forward IGMP Report packets on nonrouter ports.
+=item (0x20) - The bridge or switch does not forward IGMP Report packets on
+non router ports.
 
-=item (0x10) - Sends and receives packets for at least one network layer protocol. If the device is routing the protocol, this bit should not be set.
+=item (0x10) - Sends and receives packets for at least one network layer
+protocol. If the device is routing the protocol, this bit should not be set.
 
-=item (0x08) - Performs level 2 switching. The difference between this bit and bit 0x02 is that a switch does not run the Spanning-Tree Protocol. This device is assumed to be deployed in a physical loop-free topology.
+=item (0x08) - Performs level 2 switching. The difference between this bit
+and bit 0x02 is that a switch does not run the Spanning-Tree Protocol. This
+device is assumed to be deployed in a physical loop-free topology.
 
-=item (0x04) - Performs level 2 source-route bridging. A source-route bridge would set both this bit and bit 0x02.
+=item (0x04) - Performs level 2 source-route bridging. A source-route bridge
+would set both this bit and bit 0x02.
 
 =item (0x02) - Performs level 2 transparent bridging.
 
-=item (0x01) - Performs level 3 routing for at least one network layer protocol.
+=item (0x01) - Performs level 3 routing for at least one network layer
+protocol.
 
 =back
 
-Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to this information.
+Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to this
+information.
 
-(B<cdpCacheCapabilities>)
+(C<cdpCacheCapabilities>)
 
-=item $cdp->c_domain()
+=item $cdp->cdp_domain()
 
-Returns remote VTP Management Domain as defined in CISCO-VTP-MIB::managementDomainName
+Returns remote VTP Management Domain as defined in
+C<CISCO-VTP-MIB::managementDomainName>
 
-(B<cdpCacheVTPMgmtDomain>)
+(C<cdpCacheVTPMgmtDomain>)
 
-=item $cdp->c_duplex() 
+=item $cdp->cdp_duplex() 
 
 Returns the port duplex status from remote devices.
 
-(B<cdpCacheDuplex>)
+(C<cdpCacheDuplex>)
 
-=item $cdp->c_id()
+=item $cdp->cdp_id()
 
 Returns remote device id string
 
-(B<cdpCacheDeviceId>)
+(C<cdpCacheDeviceId>)
 
-=item $cdp->c_if()
+=item $cdp->cdp_if()
 
 Returns the mapping to the SNMP Interface Table.
 
-Note that a lot devices don't implement $cdp->c_index(),  So if it isn't around,
-we fake it. 
+Note that a lot devices don't implement $cdp->cdp_index(),  So if it isn't
+around, we fake it. 
 
-In order to map the cdp table entry back to the interfaces() entry, we truncate the last number
-off of it :
+In order to map the cdp table entry back to the interfaces() entry, we
+truncate the last number off of it :
 
   # it exists, yay.
-  my $c_index     = $device->c_index();
-  return $c_index if defined $c_index;
+  my $cdp_index     = $device->cdp_index();
+  return $cdp_index if defined $cdp_index;
 
   # if not, let's fake it
-  my $c_ip       = $device->c_ip();
+  my $cdp_ip       = $device->cdp_ip();
     
-  my %c_if
-  foreach my $key (keys %$c_ip){
+  my %cdp_if
+  foreach my $key (keys %$cdp_ip){
       $iid = $key;
       ## Truncate off .1 from cdp response
       $iid =~ s/\.\d+$//;
-      $c_if{$key} = $iid;
+      $cdp_if{$key} = $iid;
   }
  
-  return \%c_if;
+  return \%cdp_if;
 
 
-=item $cdp->c_index()
+=item $cdp->cdp_index()
 
 Returns the mapping to the SNMP2 Interface table for CDP Cache Entries. 
 
-Most devices don't implement this, so you probably want to use $cdp->c_if() instead.
+Most devices don't implement this, so you probably want to use $cdp->cdp_if()
+instead.
 
-See c_if() entry.
+See cdp_if() entry.
 
-(B<cdpCacheIfIndex>)
+(C<cdpCacheIfIndex>)
 
-=item  $cdp->c_ip()
+=item  $cdp->cdp_ip()
 
-Returns remote IP address
+If $cdp->cdp_proto() is supported, returns remote IPV4 address only.  Otherwise
+it will return all addresses.
 
-(B<cdpCacheAddress>)
+(C<cdpCacheAddress>)
 
-=item $cdp->c_platform() 
+=item  $cdp->cdp_addr()
+
+Returns remote address
+
+(C<cdpCacheAddress>)
+
+=item $cdp->cdp_platform() 
 
 Returns remote platform id 
 
-(B<cdpCachePlatform>)
+(C<cdpCachePlatform>)
 
-=item $cdp->c_port()
+=item $cdp->cdp_port()
 
 Returns remote port ID
 
-(B<cdpDevicePort>)
+(C<cdpDevicePort>)
 
-=item  $cdp->c_proto()
+=item  $cdp->cdp_proto()
 
 Returns remote address type received.  Usually IP.
 
-(B<cdpCacheAddressType>)
+(C<cdpCacheAddressType>)
 
-=item $cdp->c_ver() 
+=item $cdp->cdp_ver() 
 
 Returns remote hardware version
 
-(B<cdpCacheVersion>)
+(C<cdpCacheVersion>)
 
-=item $cdp->c_vlan()
+=item $cdp->cdp_vlan()
 
 Returns the remote interface native VLAN.
 
-(B<cdpCacheNativeVLAN>)
+(C<cdpCacheNativeVLAN>)
+
+=item $cdp->cdp_power()
+
+Returns the amount of power consumed by remote device in milliwatts munged
+for decimal placement.
+
+(C<cdpCachePowerConsumption>)
+
+=back
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item $cdp->munge_power()
+
+Inserts a decimal at the proper location.
 
 =back
 

Info/CiscoConfig.pm

@@ -0,0 +1,473 @@
+# SNMP::Info::CiscoConfig
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoConfig;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::CiscoConfig::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoConfig::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    'CISCO-CONFIG-COPY-MIB' => 'ccCopyTable',
+    'CISCO-FLASH-MIB'       => 'ciscoFlashCopyTable',
+    'OLD-CISCO-SYS-MIB'     => 'writeMem',
+);
+
+%GLOBALS = (
+
+    # OLD-CISCO-SYS-MIB
+    'old_write_mem' => 'writeMem',
+    'old_write_net' => 'writeNet',
+);
+
+%FUNCS = (
+
+    # CISCO-COPY-CONFIG-MIB::ccCopyTable
+    'config_protocol'           => 'ccCopyProtocol',
+    'config_source_type'        => 'ccCopySourceFileType',
+    'config_dest_type'          => 'ccCopyDestFileType',
+    'config_server_addr'        => 'ccCopyServerAddress',
+    'config_filename'           => 'ccCopyFileName',
+    'config_username'           => 'ccCopyUserName',
+    'config_password'           => 'ccCopyUserPassword',
+    'config_notify_complete'    => 'ccCopyNotificationOnCompletion',
+    'config_copy_state'         => 'ccCopyState',
+    'config_copy_start_time'    => 'ccCopyTimeStarted',
+    'config_copy_complete_time' => 'ccCopyTimeCompleted',
+    'config_fail_cause'         => 'ccCopyFailCause',
+    'config_row_status'         => 'ccCopyEntryRowStatus',
+
+    # CISCO-FLASH-MIB::ciscoFlashCopyTable
+    'flash_copy_cmd'        => 'ciscoFlashCopyCommand',
+    'flash_copy_protocol'   => 'ciscoFlashCopyProtocol',
+    'flash_copy_address'    => 'ciscoFlashCopyServerAddress',
+    'flash_copy_source'     => 'ciscoFlashCopySourceName',
+    'flash_copy_dest'       => 'ciscoFlashCopyDestinationName',
+    'flash_copy_row_status' => 'ciscoFlashCopyEntryStatus',
+);
+
+%MUNGE = ();
+
+sub copy_run_tftp {
+    my $ciscoconfig = shift;
+    my ( $tftphost, $tftpfile ) = @_;
+
+    srand( time() ^ ( $$ + ( $$ << 15 ) ) );
+    my $rand = int( rand( 1 << 24 ) );
+
+    print "Saving running config to $tftphost as $tftpfile\n"
+        if $ciscoconfig->debug();
+
+    #Try new method first fall back to old method
+    if ( $ciscoconfig->set_config_protocol( 1, $rand ) ) {
+        print "Using new method, row iid: $rand\n" if $ciscoconfig->debug();
+
+        #Check each set, delete created row if any fail
+        unless ( $ciscoconfig->set_config_source_type( 4, $rand ) ) {
+            $ciscoconfig->error_throw("Setting source type failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Setting source type failed and failed to delete row $rand"
+                );
+            }
+            return;
+        }
+        unless ( $ciscoconfig->set_config_dest_type( 1, $rand ) ) {
+            $ciscoconfig->error_throw("Setting destination type failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Setting dest type failed and failed to delete row $rand"
+                );
+            }
+            return;
+        }
+        unless ( $ciscoconfig->set_config_server_addr( $tftphost, $rand ) ) {
+            $ciscoconfig->error_throw("Setting tftp server failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Setting tftp server failed and failed to delete row $rand"
+                );
+            }
+            return;
+        }
+        unless ( $ciscoconfig->set_config_filename( $tftpfile, $rand ) ) {
+            $ciscoconfig->error_throw("Setting file name failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Setting file name failed and failed to delete row $rand"
+                );
+            }
+            return;
+        }
+        unless ( $ciscoconfig->set_config_row_status( 1, $rand ) ) {
+            $ciscoconfig->error_throw("Initiating transfer failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Initiating transfer failed and failed to delete row $rand"
+                );
+            }
+            return;
+        }
+        my $status = 0;
+        my $timer  = 0;
+
+       # Hard-coded timeout of approximately 5 minutes, we can wrap this in an
+       # option later if needed
+        my $timeout = 300;
+        while ( $status !~ /successful|failed/ ) {
+            my $t = $ciscoconfig->config_copy_state($rand);
+            $status = $t->{$rand};
+            last if $status =~ /successful|failed/;
+            $timer += 1;
+            if ( $timer >= $timeout ) {
+                $status = 'failed';
+                last;
+            }
+            sleep 1;
+        }
+
+        unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+            print "Failed deleting row, iid $rand\n" if $ciscoconfig->debug();
+        }
+
+        if ( $status eq 'successful' ) {
+            print "Save operation successful\n" if $ciscoconfig->debug();
+            return 1;
+        }
+        if ( $status eq 'failed' ) {
+            $ciscoconfig->error_throw("Save operation failed");
+            return;
+        }
+
+    }
+
+    print "Using old method\n" if $ciscoconfig->debug();
+    unless ( $ciscoconfig->set_old_write_net( $tftpfile, $tftphost ) ) {
+        $ciscoconfig->error_throw("Save operation failed");
+        return;
+    }
+
+    return 1;
+}
+
+sub copy_run_start {
+    my $ciscoconfig = shift;
+
+    srand( time() ^ ( $$ + ( $$ << 15 ) ) );
+    my $rand = int( rand( 1 << 24 ) );
+
+    print "Saving running config to memory\n" if $ciscoconfig->debug();
+
+    if ( $ciscoconfig->set_config_source_type( 4, $rand ) ) {
+        print "Using new method, row iid: $rand\n" if $ciscoconfig->debug();
+
+        #Check each set, delete created row if any fail
+        unless ( $ciscoconfig->set_config_dest_type( 3, $rand ) ) {
+            $ciscoconfig->error_throw("Setting dest type failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Setting dest type failed and failed to delete row $rand"
+                );
+            }
+            return;
+        }
+        unless ( $ciscoconfig->set_config_row_status( 1, $rand ) ) {
+            $ciscoconfig->error_throw("Initiating save failed");
+            unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+                $ciscoconfig->error_throw(
+                    "Initiating save failed and failed to delete row $rand");
+            }
+            return;
+        }
+        my $status = 0;
+        my $timer  = 0;
+
+       # Hard-coded timeout of approximately 5 minutes, we can wrap this in an
+       # option later if needed
+        my $timeout = 300;
+        while ( $status !~ /successful|failed/ ) {
+            my $t = $ciscoconfig->config_copy_state($rand);
+            $status = $t->{$rand};
+            last if $status =~ /successful|failed/;
+            $timer += 1;
+            if ( $timer >= $timeout ) {
+                $status = 'failed';
+                last;
+            }
+            sleep 1;
+        }
+
+        unless ( $ciscoconfig->set_config_row_status( 6, $rand ) ) {
+            print "Failed deleting row, iid $rand\n" if $ciscoconfig->debug();
+        }
+
+        if ( $status eq 'successful' ) {
+            print "Save operation successful\n" if $ciscoconfig->debug();
+            return 1;
+        }
+        if ( $status eq 'failed' ) {
+            $ciscoconfig->error_throw("Save operation failed");
+            return;
+        }
+
+    }
+
+    print "Using old method\n" if $ciscoconfig->debug();
+    unless ( $ciscoconfig->set_old_write_mem(1) ) {
+        $ciscoconfig->error_throw("Save operation failed");
+        return;
+    }
+
+    return 1;
+}
+
+1;
+__END__
+
+
+=head1 NAME
+
+SNMP::Info::CiscoConfig - SNMP Interface to Cisco Configuration Files
+
+=head1 AUTHOR
+
+Justin Hunter, Eric Miller
+
+=head1 SYNOPSIS
+
+    my $ciscoconfig = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $ciscoconfig->class();
+    print " Using device sub class : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoConfig is a subclass of SNMP::Info that provides an interface
+to F<CISCO-CONFIG-COPY-MIB>, F<CISCO-FLASH-MIB>, and F<OLD-CISCO-SYS-MIB>.
+These MIBs facilitate the writing of configuration files.
+
+Use or create a subclass of SNMP::Info that inherits this one.
+Do not use directly.
+
+=head2 Inherited Classes
+
+=over
+
+None.
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-CONFIG-COPY-MIB>
+
+=item F<CISCO-FLASH-MIB>
+
+=item F<OLD-CISCO-SYS-MIB>
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ciscoconfig->old_write_mem()
+
+(C<writeMem>)
+
+=item $ciscoconfig->old_write_net()
+
+(C<writeNet>)
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=back
+
+=head2 Config Copy Request Table  (C<ccCopyTable>)
+
+=over
+
+=item $ciscoconfig->config_protocol()
+
+(C<ccCopyProtocol>)
+
+=item $ciscoconfig->config_source_type()
+
+(C<ccCopySourceFileType>)
+
+=item $ciscoconfig->config_dest_type()
+
+(C<ccCopyDestFileType>)
+
+=item $ciscoconfig->config_server_addr()
+
+(C<ccCopyServerAddress>)
+
+=item $ciscoconfig->config_filename()
+
+(C<ccCopyFileName>)
+
+=item $ciscoconfig->config_username()
+
+(C<ccCopyUserName>)
+
+=item $ciscoconfig->config_password()
+
+(C<ccCopyUserPassword>)
+
+=item $ciscoconfig->config_notify_complete()
+
+(C<ccCopyNotificationOnCompletion>)
+
+=item $ciscoconfig->config_copy_state()
+
+(C<ccCopyState>)
+
+=item $ciscoconfig->config_copy_start_time()
+
+(C<ccCopyTimeStarted>)
+
+=item $ciscoconfig->config_copy_complete_time()
+
+(C<ccCopyTimeCompleted>)
+
+=item $ciscoconfig->config_fail_cause()
+
+(C<ccCopyFailCause>)
+
+=item $ciscoconfig->config_row_status()
+
+(C<ccCopyEntryRowStatus>)
+
+=back
+
+=head2 Flash Copy Table (C<ciscoFlashCopyTable>)
+
+Table of Flash copy operation entries.
+
+=over
+
+=item $ciscoconfig->flash_copy_cmd()
+
+(C<ciscoFlashCopyCommand>)
+
+=item $ciscoconfig->flash_copy_protocol()
+
+(C<ciscoFlashCopyProtocol>)
+
+=item $ciscoconfig->flash_copy_address()
+
+(C<ciscoFlashCopyServerAddress>)
+
+=item $ciscoconfig->flash_copy_source()
+
+(C<ciscoFlashCopySourceName>)
+
+=item $ciscoconfig->flash_copy_dest()
+
+(C<ciscoFlashCopyDestinationName>)
+
+=item $ciscoconfig->flash_copy_row_status()
+
+(C<ciscoFlashCopyEntryStatus>)
+
+=back
+
+=head1 SET METHODS
+
+These are methods that provide SNMP set functionality for overridden methods
+or provide a simpler interface to complex set operations.  See
+L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
+operations. 
+
+=over
+
+=item $ciscoconfig->copy_run_tftp (tftpserver, tftpfilename )
+
+Store the running configuration on a TFTP server.  Equivalent to the CLI
+commands "copy running-config tftp" or "write net".
+
+This method attempts to use newer "copy running-config tftp" procedure first
+and then the older "write net" procedure if that fails.  The newer procedure
+is supported Cisco devices with the F<CISCO-CONFIG-COPY-MIB> available, Cisco
+IOS software release 12.0 or on some devices as early as release 11.2P.  The
+older procedure has been depreciated by Cisco and is utilized only to support
+devices running older code revisions.
+
+ Example:
+ $ciscoconfig->copy_run_tftp('1.2.3.4', 'myconfig') 
+    or die "Couldn't save config. ",$ciscoconfig->error(1);
+
+=item $ciscoconfig->copy_run_start()
+
+Copy the running configuration to the start up configuration.  Equivalent to
+the CLI command C<"copy running-config startup-config"> or C<"write mem">.
+
+This method attempts to use newer C<"copy running-config startup-config">
+procedure first and then the older C<"write mem"> procedure if that fails.
+The newer procedure is supported Cisco devices with the
+F<CISCO-CONFIG-COPY-MIB> available, Cisco IOS software release 12.0 or on
+some devices as early as release 11.2P.  The older procedure has been
+depreciated by Cisco and is utilized only to support devices running older
+code revisions.
+
+ Example:
+ $ciscoconfig->copy_run_start()
+    or die "Couldn't save config. ",$ciscoconfig->error(1);
+
+=back
+
+=cut

Info/CiscoImage.pm

@@ -0,0 +1,115 @@
+# $Id$
+#
+# Copyright (c) 2005 Matt Tuttle
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoImage;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::CiscoImage::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoImage::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( 'CISCO-IMAGE-MIB' => 'ciscoImageString', );
+
+%GLOBALS = ();
+
+%FUNCS = ( 'ci_images' => 'ciscoImageString', );
+
+%MUNGE = ();
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoImage - SNMP Interface to image strings for Cisco Devices
+
+=head1 AUTHOR
+
+Matt Tuttle (C<mtuttle@americanhebrewacademy.org>)
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $ci = new SNMP::Info(
+                AutoSpecify => 1,
+                Debug       => 1,
+                # These arguments are passed directly on to SNMP::Session
+                DestHost    => 'myswitch',
+                Community   => 'public',
+                Version     => 2
+                )
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $ci->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoImage is a subclass of SNMP::Info that provides access to
+image strings embedded in an image running on Cisco Devices.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-IMAGE-MIB>
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBALS
+
+None.
+
+=head1 TABLE METHODS
+
+=over
+
+=item $ci->ci_images()
+
+Returns the table of image strings.
+
+C<ciscoImageString>
+
+=back
+
+=cut

Info/CiscoPortSecurity.pm

@@ -0,0 +1,388 @@
+# SNMP::Info::CiscoPortSecurity
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoPortSecurity;
+
+use strict;
+use Exporter;
+
+@SNMP::Info::CiscoPortSecurity::ISA       = qw/Exporter/;
+@SNMP::Info::CiscoPortSecurity::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE %PAECAPABILITIES/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    'CISCO-PORT-SECURITY-MIB' => 'ciscoPortSecurityMIB',
+    'CISCO-PAE-MIB'           => 'ciscoPaeMIB',
+    'IEEE8021-PAE-MIB'        => 'dot1xAuthLastEapolFrameSource',
+);
+
+%GLOBALS = (
+
+    # CISCO-PORT-SECURITY-MIB
+    'cps_clear'     => 'cpsGlobalClearSecureMacAddresses',
+    'cps_notify'    => 'cpsGlobalSNMPNotifControl',
+    'cps_rate'      => 'cpsGlobalSNMPNotifRate',
+    'cps_enable'    => 'cpsGlobalPortSecurityEnable',
+    'cps_mac_count' => 'cpsGlobalTotalSecureAddress',
+    'cps_mac_max'   => 'cpsGlobalMaxSecureAddress',
+);
+
+%FUNCS = (
+
+    # CISCO-PORT-SECURITY-MIB::cpsIfConfigTable
+    'cps_i_limit_val'  => 'cpsIfInvalidSrcRateLimitValue',
+    'cps_i_limit'      => 'cpsIfInvalidSrcRateLimitEnable',
+    'cps_i_sticky'     => 'cpsIfStickyEnable',
+    'cps_i_clear_type' => 'cpsIfClearSecureMacAddresses',
+    'cps_i_shutdown'   => 'cpsIfShutdownTimeout',
+    'cps_i_flood'      => 'cpsIfUnicastFloodingEnable',
+    'cps_i_clear'      => 'cpsIfClearSecureAddresses',
+    'cps_i_mac'        => 'cpsIfSecureLastMacAddress',
+    'cps_i_count'      => 'cpsIfViolationCount',
+    'cps_i_action'     => 'cpsIfViolationAction',
+    'cps_i_mac_static' => 'cpsIfStaticMacAddrAgingEnable',
+    'cps_i_mac_type'   => 'cpsIfSecureMacAddrAgingType',
+    'cps_i_mac_age'    => 'cpsIfSecureMacAddrAgingTime',
+    'cps_i_mac_count'  => 'cpsIfCurrentSecureMacAddrCount',
+    'cps_i_mac_max'    => 'cpsIfMaxSecureMacAddr',
+    'cps_i_status'     => 'cpsIfPortSecurityStatus',
+    'cps_i_enable'     => 'cpsIfPortSecurityEnable',
+
+    # CISCO-PORT-SECURITY-MIB::cpsIfVlanTable
+    'cps_i_v_mac_count' => 'cpsIfVlanCurSecureMacAddrCount',
+    'cps_i_v_mac_max'   => 'cpsIfVlanMaxSecureMacAddr',
+    'cps_i_v'           => 'cpsIfVlanIndex',
+
+    # CISCO-PORT-SECURITY-MIB::cpsIfVlanSecureMacAddrTable
+    'cps_i_v_mac_status' => 'cpsIfVlanSecureMacAddrRowStatus',
+    'cps_i_v_mac_age'    => 'cpsIfVlanSecureMacAddrRemainAge',
+    'cps_i_v_mac_type'   => 'cpsIfVlanSecureMacAddrType',
+    'cps_i_v_vlan'       => 'cpsIfVlanSecureVlanIndex',
+    'cps_i_v_mac'        => 'cpsIfVlanSecureMacAddress',
+
+    # CISCO-PORT-SECURITY-MIB::cpsSecureMacAddressTable
+    'cps_m_status' => 'cpsSecureMacAddrRowStatus',
+    'cps_m_age'    => 'cpsSecureMacAddrRemainingAge',
+    'cps_m_type'   => 'cpsSecureMacAddrType',
+    'cps_m_mac'    => 'cpsSecureMacAddress',
+
+    # IEEE8021-PAE-MIB::dot1xPaePortEntry
+    'pae_i_capabilities'            => 'dot1xPaePortCapabilities',
+    'pae_i_last_eapol_frame_source' => 'dot1xAuthLastEapolFrameSource',
+);
+
+%MUNGE = (
+    'cps_i_mac'                     => \&SNMP::Info::munge_mac,
+    'cps_m_mac'                     => \&SNMP::Info::munge_mac,
+    'cps_i_v_mac'                   => \&SNMP::Info::munge_mac,
+    'pae_i_last_eapol_frame_source' => \&SNMP::Info::munge_mac,
+    'pae_i_capabilities'            => \&munge_pae_capabilities,
+);
+
+%PAECAPABILITIES = (
+    0 => 'dot1xPaePortAuthCapable',
+    1 => 'dot1xPaePortSuppCapable'
+);
+
+sub munge_pae_capabilities {
+    my $bits = shift;
+
+    return unless defined $bits;
+    my @vals
+        = map( $PAECAPABILITIES{$_}, sprintf( "%x", unpack( 'b*', $bits ) ) );
+    return join( ' ', @vals );
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoPortSecurity - SNMP Interface to data from
+F<CISCO-PORT-SECURITY-MIB> and F<CISCO-PAE-MIB>
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $cps = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $cps->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoPortSecurity is a subclass of SNMP::Info that provides
+an interface to the F<CISCO-PORT-SECURITY-MIB> and F<CISCO-PAE-MIB>.  These
+MIBs are used across the Catalyst family under CatOS and IOS.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-PORT-SECURITY-MIB>
+
+=item F<CISCO-PAE-MIB>
+
+=item F<IEEE8021-PAE-MIB>
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=back
+
+=head2 F<CISCO-PORT-SECURITY-MIB> globals
+
+=over
+
+=item $cps->cps_clear()
+
+(C<cpsGlobalClearSecureMacAddresses>)
+
+=item $cps->cps_notify()
+
+(C<cpsGlobalSNMPNotifControl>)
+
+=item $cps->cps_rate()
+
+(C<cpsGlobalSNMPNotifRate>)
+
+=item $cps->cps_enable()
+
+(C<cpsGlobalPortSecurityEnable>)
+
+=item $cps->cps_mac_count()
+
+(C<cpsGlobalTotalSecureAddress>)
+
+=item $cps->cps_mac_max()
+
+(C<cpsGlobalMaxSecureAddress>)
+
+=back
+
+=head1 TABLE METHODS
+
+=head2 C<CISCO-PORT-SECURITY-MIB> - Interface Config Table
+
+=over
+
+=item $cps->cps_i_limit_val()
+
+(C<cpsIfInvalidSrcRateLimitValue>)
+
+=item $cps->cps_i_limit()
+
+(C<cpsIfInvalidSrcRateLimitEnable>)
+
+=item $cps->cps_i_sticky()
+
+(C<cpsIfStickyEnable>)
+
+=item $cps->cps_i_clear_type()
+
+(C<cpsIfClearSecureMacAddresses>)
+
+=item $cps->cps_i_shutdown()
+
+(C<cpsIfShutdownTimeout>)
+
+=item $cps->cps_i_flood()
+
+(C<cpsIfUnicastFloodingEnable>)
+
+=item $cps->cps_i_clear()
+
+(C<cpsIfClearSecureAddresses>)
+
+=item $cps->cps_i_mac()
+
+(C<cpsIfSecureLastMacAddress>)
+
+=item $cps->cps_i_count()
+
+(C<cpsIfViolationCount>)
+
+=item $cps->cps_i_action()
+
+(C<cpsIfViolationAction>)
+
+=item $cps->cps_i_mac_static()
+
+(C<cpsIfStaticMacAddrAgingEnable>)
+
+=item $cps->cps_i_mac_type()
+
+(C<cpsIfSecureMacAddrAgingType>)
+
+=item $cps->cps_i_mac_age()
+
+(C<cpsIfSecureMacAddrAgingTime>)
+
+=item $cps->cps_i_mac_count()
+
+(C<cpsIfCurrentSecureMacAddrCount>)
+
+=item $cps->cps_i_mac_max()
+
+(C<cpsIfMaxSecureMacAddr>)
+
+=item $cps->cps_i_status()
+
+(C<cpsIfPortSecurityStatus>)
+
+=item $cps->cps_i_enable()
+
+(C<cpsIfPortSecurityEnable>)
+
+=back
+
+=head2 C<CISCO-PORT-SECURITY-MIB::cpsIfVlanTable>
+
+=over
+
+=item $cps->cps_i_v_mac_count()
+
+(C<cpsIfVlanCurSecureMacAddrCount>)
+
+=item $cps->cps_i_v_mac_max()
+
+(C<cpsIfVlanMaxSecureMacAddr>)
+
+=item $cps->cps_i_v()
+
+(C<cpsIfVlanIndex>)
+
+=back
+
+=head2 C<CISCO-PORT-SECURITY-MIB::cpsIfVlanSecureMacAddrTable>
+
+=over
+
+=item $cps->cps_i_v_mac_status()
+
+(C<cpsIfVlanSecureMacAddrRowStatus>)
+
+=item $cps->cps_i_v_mac_age()
+
+(C<cpsIfVlanSecureMacAddrRemainAge>)
+
+=item $cps->cps_i_v_mac_type()
+
+(C<cpsIfVlanSecureMacAddrType>)
+
+=item $cps->cps_i_v_vlan()
+
+(C<cpsIfVlanSecureVlanIndex>)
+
+=item $cps->cps_i_v_mac()
+
+(C<cpsIfVlanSecureMacAddress>)
+
+=back
+
+=head2 C<CISCO-PORT-SECURITY-MIB::cpsSecureMacAddressTable>
+
+=over
+
+=item $cps->cps_m_status()
+
+(C<cpsSecureMacAddrRowStatus>)
+
+=item $cps->cps_m_age()
+
+(C<cpsSecureMacAddrRemainingAge>)
+
+=item $cps->cps_m_type()
+
+(C<cpsSecureMacAddrType>)
+
+=item $cps->cps_m_mac()
+
+(C<cpsSecureMacAddress>)
+
+=back
+
+=head2 C<IEEE8021-PAE-MIB::dot1xPaePortEntry>
+
+=over
+
+=item $cps->pae_i_capabilities()
+
+C<dot1xPaePortCapabilities>
+
+Indicates the PAE functionality that this Port supports
+and that may be managed through this MIB munged to return either
+C<'dot1xPaePortAuthCapable'> or C<'dot1xPaePortSuppCapable'>.
+
+=item $cps->pae_i_last_eapol_frame_source()
+
+C<dot1xAuthLastEapolFrameSource>
+
+The source MAC address carried in the most recently received EAPOL frame.
+
+=back
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item $cps->munge_pae_capabilities()
+
+Return either C<'dot1xPaePortAuthCapable'> or C<'dot1xPaePortSuppCapable'>
+based upon bit value.
+
+=back
+
+=cut

Info/CiscoPower.pm

@@ -0,0 +1,193 @@
+# SNMP::Info::CiscoPower
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoPower;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::CiscoPower::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoPower::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( 'CISCO-POWER-ETHERNET-EXT-MIB' => 'cpeExtPsePortEntPhyIndex',
+          'CISCO-CDP-MIB' => 'cdpCachePowerConsumption' );
+
+%GLOBALS = ();
+
+%FUNCS = ( 
+    'cpeth_ent_phy'     => 'cpeExtPsePortEntPhyIndex', 
+    'peth_port_power'   => 'cpeExtPsePortPwrConsumption', 
+);
+
+%MUNGE = ();
+
+# Cisco overcame the limitation of the module.port index of the
+# pethPsePortTable by adding another mapping table, which maps
+# a pethPsePortTable row to an entPhysicalTable index, which can
+# then be mapped to ifIndex.
+sub peth_port_ifindex {
+    my $cpeth   = shift;
+    my $partial = shift;
+
+    my $ent_phy = $cpeth->cpeth_ent_phy($partial);
+    my $e_port  = $cpeth->e_port();
+
+    my $peth_port_ifindex = {};
+    foreach my $i ( keys %$ent_phy ) {
+        if ( $e_port->{ $ent_phy->{$i} } ) {
+            $peth_port_ifindex->{$i} = $e_port->{ $ent_phy->{$i} };
+        }
+    }
+    return $peth_port_ifindex;
+}
+
+# peth_port_neg_power uses the same index as the other peth_port_* tables.
+# However, cdpCachePowerConsumption uses <ifIndex>.<neighbor>.
+# Therefore, we have to invert peth_port_ifindex, to get to
+# the index that is expected and the rest of the code can re-invert it.
+sub peth_port_neg_power {
+    my $cpeth   = shift;
+    my $partial = shift;
+
+    # Ignoring partial, since it's not easy to implement properly.
+    my $index = $cpeth->peth_port_ifindex();
+    my %inverse_index;
+    foreach my $i ( keys %$index ) {
+	$inverse_index{ $index->{$i} } = $i;
+    }
+    my $neg_power = $cpeth->cdpCachePowerConsumption();
+    my $peth_port_neg_power = {};
+    foreach my $i ( keys %$neg_power ) {
+	my( $ifIndex, $nbrIndex ) = split( /\./, $i );
+	if ( defined( $inverse_index{ $ifIndex } ) ) {
+		$peth_port_neg_power->{ $inverse_index{ $ifIndex } } = $neg_power->{ $i };
+	}
+    }
+    return $peth_port_neg_power;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoPower - SNMP Interface to data stored in
+F<CISCO-POWER-ETHERNET-EXT-MIB>.
+
+=head1 AUTHOR
+
+Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $poe = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $poe->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+The Info::PowerEthernet class needs a per-device helper function to
+properly map the C<pethPsePortTable> to C<ifIndex> values.  This class
+provides that helper, using F<CISCO-POWER-ETHERNET-EXT-MIB>.
+It does not define any helpers for the extra values that this MIB
+contains.
+
+Create or use a device subclass that inherit this class.  Do not use directly.
+
+For debugging purposes you can call this class directly as you would
+SNMP::Info
+
+ my $poe = new SNMP::Info::CiscoPower (...);
+
+=head2 Inherited Classes
+
+none.
+
+Note that it requires that the device inherits from Info::Entity.
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-POWER-ETHERNET-EXT-MIB>
+
+=back
+
+=head1 GLOBALS
+
+none.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Power Port Table
+
+=over
+
+=item $poe->peth_port_ifindex()
+
+Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
+
+=item $poe->peth_port_power()
+
+Power supplied by PoE ports, in milliwatts
+(C<cpeExtPsePortPwrConsumption>)
+ 
+=back
+
+=head2 CDP Port table
+
+=over
+
+=item $poe->peth_port_neg_power()
+
+Power negotiated using CDP, in milliwatts
+(C<cdpCachePowerConsumption>)
+
+=back
+
+=cut

Info/CiscoQOS.pm

@@ -0,0 +1,218 @@
+# SNMP::Info::CiscoQOS
+# $Id$
+#
+# Copyright (c) 2005 Alexander Hartmaier
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoQOS;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::CiscoQOS::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoQOS::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( 'CISCO-CLASS-BASED-QOS-MIB' => 'cbQosIfIndex', );
+
+%GLOBALS = ();
+
+%FUNCS = (
+
+    # CISCO-CLASS-BASED-QOS-MIB::cbQosServicePolicyTable
+    'qos_i_index'       => 'cbQosIfIndex',
+    'qos_i_type'        => 'cbQosIfType',
+    'qos_pol_direction' => 'cbQosPolicyDirection',
+
+    # CISCO-CLASS-BASED-QOS-MIB::cbQosObjectsTable
+    'qos_obj_conf_index' => 'cbQosConfigIndex',
+    'qos_obj_type'       => 'cbQosObjectsType',
+    'qos_obj_parent'     => 'cbQosParentObjectsIndex',
+
+    # CISCO-CLASS-BASED-QOS-MIB::cbQosCMCfgTable
+    'qos_cm_name' => 'cbQosCMName',
+    'qos_cm_desc' => 'cbQosCMDesc',
+    'qos_cm_info' => 'cbQosCMInfo',
+
+    # CISCO-CLASS-BASED-QOS-MIB::cbQosCMStatsTable
+    'qos_octet_pre'  => 'cbQosCMPrePolicyByte',
+    'qos_octet_post' => 'cbQosCMPostPolicyByte',
+
+    # CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgTable
+    'qos_queueingcfg_bw'       => 'cbQosQueueingCfgBandwidth',
+    'qos_queueingcfg_bw_units' => 'cbQosQueueingCfgBandwidthUnits',
+);
+
+%MUNGE = ();
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoQOS - SNMP Interface to Cisco's Quality of Service MIBs
+
+=head1 AUTHOR
+
+Alexander Hartmaier
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $qos = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $qos->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoQOS is a subclass of SNMP::Info that provides 
+information about a cisco device's QoS config.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+none.
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-CLASS-BASED-QOS-MIB>
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBALS
+
+=over
+
+=item none
+
+=back
+
+=head1 TABLE METHODS
+
+=head2 Service Policy Table (C<cbQosServicePolicyTable>)
+
+This table describes the interfaces/media types and the policy map that are
+attached to it.
+
+=over
+
+=item $qos->qos_i_index()
+
+(C<cbQosIfIndex>)
+
+=item $qos->qos_i_type()
+
+(C<cbQosIfType>)
+
+=item $qos->qos_pol_direction()
+
+(C<cbQosPolicyDirection>)
+
+=back
+
+=head2 Class Map Objects Table (C<cbQosObjectsTable>)
+
+=over
+
+=item $qos->qos_obj_index()
+
+(C<cbQosConfigIndex>)
+
+=item $qos->qos_obj_type()
+
+(C<cbQosObjectsType>)
+
+=item $qos->qos_obj_parent()
+
+(C<cbQosParentObjectsIndex>)
+
+=back
+
+=head2 Class Map Configuration Table (C<cbQosCMCfgTable>)
+
+=over
+
+=item $qos->qos_cm_name()
+
+(C<cbQosCMName>)
+
+=item $qos->qos_cm_desc()
+
+(C<cbQosCMDesc>)
+
+=item $qos->qos_cm_info()
+
+(C<cbQosCMInfo>)
+
+=back
+
+=head2 Class Map Stats Table (C<cbQosCMStatsTable>)
+
+=over
+
+=item $qos->qos_octet_pre()
+
+(C<cbQosCMPrePolicyByte>)
+
+=item $qos->qos_octet_post()
+
+(C<cbQosCMPostPolicyByte>)
+
+=back
+
+=head2 Queueing Configuration Table (C<cbQosQueueingCfgTable>)
+
+=over
+
+=item $qos->qos_queueingcfg_bw()
+
+(C<cbQosQueueingCfgBandwidth>)
+
+=item $qos->qos_queueingcfg_bw_units()
+
+(C<cbQosQueueingCfgBandwidthUnits>)
+
+=back
+
+=cut

Info/CiscoRTT.pm

@@ -0,0 +1,138 @@
+# SNMP::Info::CiscoRTT
+# $Id$
+#
+# Copyright (c) 2005 Alexander Hartmaier
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoRTT;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::CiscoRTT::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoRTT::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( 'CISCO-RTTMON-MIB' => 'rttMonCtrlAdminOwner', );
+
+%GLOBALS = ();
+
+%FUNCS = (
+
+    # CISCO-RTTMON-MIB
+    'rtt_desc' => 'rttMonCtrlAdminOwner',
+    'rtt_last' => 'rttMonLatestRttOperCompletionTime',
+);
+
+%MUNGE = ();
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoRTT - SNMP Interface to Cisco's Round Trip Time MIBs
+
+=head1 AUTHOR
+
+Alexander Hartmaier
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $rtt = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $rtt->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::CiscoRTT is a subclass of SNMP::Info that provides 
+information about a cisco device's RTT values.
+
+Use or create in a subclass of SNMP::Info.  Do not use directly.
+
+=head2 Inherited Classes
+
+none.
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-RTTMON-MIB>
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBALS
+
+=over
+
+None
+
+=back
+
+=head1 TABLE METHODS
+
+=head2 Overall Control Group Table
+
+This table is from C<CISCO-RTTMAN-MIB::rttMonCtrlAdminTable>
+
+=over
+
+=item $rtt->rtt_desc()
+
+(C<rttMonCtrlAdminOwner>)
+
+=back
+
+=head2 Overall Control Group Table
+
+This table is from C<CISCO-RTTMON-MIB::rttMonCtrl>
+
+=over
+
+=item $rtt->rtt_last()
+
+(C<rttMonLatestRttOperCompletionTime>)
+
+=back
+
+=cut

Info/CiscoStats.pm

@@ -1,110 +1,234 @@
 # SNMP::Info::CiscoStats
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Changes since Version 0.7 Copyright (c) 2004 Max Baker 
-# All rights reserved.  
+# Changes since Version 0.7 Copyright (c) 2008-2009 Max Baker and SNMP::Info Developers
+# All rights reserved.
 #
 # Copyright (c) 2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::CiscoStats;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 
-use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
-@SNMP::Info::CiscoStats::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::CiscoStats::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::CiscoStats::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$INIT    = 0;
-%MIBS    = (
-            'RFC1213-MIB'           => 'sysDescr',
-            'CISCO-PROCESS-MIB'     => 'cpmCPUTotal5sec',
-            'CISCO-MEMORY-POOL-MIB' => 'ciscoMemoryPoolUsed' 
-           );
+$VERSION = '3.03';
+
+%MIBS = (
+    'SNMPv2-MIB'            => 'sysDescr',
+    'CISCO-PROCESS-MIB'     => 'cpmCPUTotal5sec',
+    'CISCO-MEMORY-POOL-MIB' => 'ciscoMemoryPoolUsed',
+    'OLD-CISCO-SYSTEM-MIB'  => 'writeMem',
+    'CISCO-PRODUCTS-MIB'    => 'sysName',
+    'ENTITY-MIB'            => 'entPhysicalSoftwareRev',
+    'CISCO-IMAGE-MIB'       => 'ciscoImageString',
+
+    # some older catalysts live here
+    'CISCO-STACK-MIB'                 => 'wsc1900sysID',
+    'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevChassis',
+    'CISCO-FLASH-MIB'                 => 'ciscoFlashDeviceSize',
+);
 
 %GLOBALS = (
-            'description'  => 'sysDescr',
-            # We will use the numeric OID's so that we don't require people
-            # to install v1 MIBs, which can conflict.
-            # OLD-CISCO-CPU-MIB:avgBusyPer
-            'ios_cpu'      => '1.3.6.1.4.1.9.2.1.56.0',
-            'ios_cpu_1min' => '1.3.6.1.4.1.9.2.1.57.0',
-            'ios_cpu_5min' => '1.3.6.1.4.1.9.2.1.58.0',
-            # CISCO-PROCESS-MIB
-            'cat_cpu'      => 'cpmCPUTotal5sec.9',
-            'cat_cpu_1min' => 'cpmCPUTotal1min.9',
-            'cat_cpu_5min' => 'cpmCPUTotal5min.9',
-            # CISCO-MEMORY-POOL-MIB
-            'mem_free'     => 'ciscoMemoryPoolFree.1',
-            'mem_used'     => 'ciscoMemoryPoolUsed.1',
-           );
+    'description' => 'sysDescr',
+    'ent_physical_software_rev' => 'entPhysicalSoftwareRev.1',
 
-%FUNCS   = (
-           );
+    # We will use the numeric OID's so that we don't require people
+    # to install v1 MIBs, which can conflict.
+    # OLD-CISCO-CPU-MIB:avgBusyPer
+    'ios_cpu'      => '1.3.6.1.4.1.9.2.1.56.0',
+    'ios_cpu_1min' => '1.3.6.1.4.1.9.2.1.57.0',
+    'ios_cpu_5min' => '1.3.6.1.4.1.9.2.1.58.0',
 
-%MUNGE   = (
-           );
+    # CISCO-PROCESS-MIB
+    'cat_cpu'      => 'cpmCPUTotal5sec.9',
+    'cat_cpu_1min' => 'cpmCPUTotal1min.9',
+    'cat_cpu_5min' => 'cpmCPUTotal5min.9',
+
+    # OLD-CISCO-SYSTEM-MIB
+    'write_mem' => 'writeMem',
+    'rom_id'    => 'romId',
+);
+
+%FUNCS = (
+
+    # CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolTable
+    'cisco_mem_free' => 'ciscoMemoryPoolFree',
+    'cisco_mem_used' => 'ciscoMemoryPoolUsed',
+
+    # CISCO-FLASH-MIB::ciscoFlashDeviceTable
+    'cisco_flash_size' => 'ciscoFlashDeviceSize',
+);
+
+%MUNGE = ();
+
+sub vendor {
+    return 'cisco';
+}
 
 sub os {
     my $l2 = shift;
-    my $descr = $l2->description();
+    my $descr = $l2->description() || '';
 
-    # order here matters - there are Catalysts that run IOS and have catalyst in their description field.
-    return 'ios'      if ($descr =~ /IOS/);
-    return 'catalyst' if ($descr =~ /catalyst/i);
-    return undef;
+    # order here matters - there are Catalysts that run IOS and have catalyst
+    # in their description field, as well as Catalysts that run IOS-XE.
+    return 'ios-xe'   if ( $descr =~ /IOS-XE/ );
+    return 'ios'      if ( $descr =~ /IOS/ );
+    return 'catalyst' if ( $descr =~ /catalyst/i );
+    return 'css'      if ( $descr =~ /Content Switch SW/ );
+    return 'css-sca'  if ( $descr =~ /Cisco Systems Inc CSS-SCA-/ );
+    return 'pix'      if ( $descr =~ /Cisco PIX Security Appliance/ );
+    return 'asa'      if ( $descr =~ /Cisco Adaptive Security Appliance/ );
+    return 'san-os'   if ( $descr =~ /Cisco SAN-OS/ );
+
+    if ( $descr =~ /Application Control Engine Service Module/ ) {
+        # Only the admin context implements the entity MIB
+        return 'ace-admin' if defined $l2->ent_physical_software_rev();
+        return 'ace-context';
+    }
+
+    # Pre-version 3 FWSMs
+    return 'fwsm'     if ( $descr =~ /Cisco Secure FWSM Firewall/ );
+
+    # Version 3+ FWSMs (currently untested against version 4)
+    if ( $descr =~ /Firewall Services Module/ ) {
+
+        my $model = $l2->model();
+
+        if ( defined $model && $model eq "WsSvcFwm1sc" ) {
+            # Only the admin context implements the entity MIB
+            return 'fwsm-admin' if defined $l2->ent_physical_software_rev();
+            return 'fwsm-context';
+        }
+
+        # Non context mode FWSM
+        return 'fwsm';
+    }
+
+    return;
 }
 
 sub os_ver {
     my $l2    = shift;
     my $os    = $l2->os();
     my $descr = $l2->description();
-    
+
     # Older Catalysts
-    if (defined $os and $os eq 'catalyst' and defined $descr and $descr =~ m/V(\d{1}\.\d{2}\.\d{2})/){
+    if (    defined $os
+        and $os eq 'catalyst'
+        and defined $descr
+        and $descr =~ m/V(\d{1}\.\d{2}\.\d{2})/ )
+    {
         return $1;
     }
-    
-    # Newer Catalysts and IOS devices
-    if (defined $descr and $descr =~ m/Version (\d+\.\d+\([^)]+\)[^,\s]*)(,|\s)+/ ){
+
+    if ( defined $os
+        and $os eq 'css'
+        and defined $descr
+        and $descr =~ m/Content Switch SW Version ([0-9\.\(\)]+) with SNMPv1\/v2c Agent/ )
+    {
         return $1;
-    } 
-    return undef;
+    }
+
+    if ( defined $os
+        and $os eq 'css-sca'
+        and defined $descr
+        and $descr =~ m/Cisco Systems Inc CSS-SCA-2FE-K9, ([0-9\.\(\)]+) Release / )
+    {
+        return $1;
+    }
+
+    if ( defined $os
+        and $os eq 'pix'
+        and defined $descr
+        and $descr =~ m/Cisco PIX Security Appliance Version ([0-9\.\(\)]+)/ )
+    {
+        return $1;
+    }
+
+    if ( defined $os
+        and $os eq 'asa'
+        and defined $descr
+        and $descr =~ m/Cisco Adaptive Security Appliance Version ([0-9\.\(\)]+)/ )
+    {
+        return $1;
+    }
+
+    if ( defined $os
+        and $os =~ /^ace/ )
+    {
+        return $l2->ent_physical_software_rev();
+    }
+
+    if ( defined $os
+        and $os =~ /^fwsm/
+        and defined $descr
+        and $descr =~ m/Version (\d+\.\d+(\(\d+\)){0,1})/ )
+    {
+        return $1;
+    }
+
+
+    # Newer Catalysts and IOS devices
+    if ( defined $descr
+        and $descr =~ m/Version (\d+\.\d+\([^)]+\)[^,\s]*)(,|\s)+/ )
+    {
+        return $1;
+    }
+
+    # Generic fallback: try to determine running image from CISCO-IMAGE-MIB
+    my $image_info = $l2->ciscoImageString() || {};
+    foreach my $row (keys %$image_info) {
+        my $info_string = $image_info->{$row};
+        if ($info_string =~ /CW_VERSION\$([^\$]+)\$/) {
+            return $1;
+        }
+    }
+
+    return;
+}
+
+sub os_bin {
+    my $self   = shift;
+    my $rom_id = $self->rom_id();
+    if ($rom_id =~ m/Version ([^,]+),/)  {
+        return $1;
+    }
+    return;
 }
 
 sub cpu {
-    my $self = shift;
+    my $self    = shift;
     my $ios_cpu = $self->ios_cpu();
     return $ios_cpu if defined $ios_cpu;
     my $cat_cpu = $self->cat_cpu();
@@ -112,7 +236,7 @@ sub cpu {
 }
 
 sub cpu_1min {
-    my $self = shift;
+    my $self         = shift;
     my $ios_cpu_1min = $self->ios_cpu_1min();
     return $ios_cpu_1min if defined $ios_cpu_1min;
     my $cat_cpu_1min = $self->cat_cpu_1min();
@@ -120,19 +244,69 @@ sub cpu_1min {
 }
 
 sub cpu_5min {
-    my $self = shift;
+    my $self         = shift;
     my $ios_cpu_5min = $self->ios_cpu_5min();
     return $ios_cpu_5min if defined $ios_cpu_5min;
     my $cat_cpu_5min = $self->cat_cpu_5min();
     return $cat_cpu_5min;
 }
 
+sub mem_free {
+    my $self = shift;
+
+    my $mem_free;
+
+    my $cisco_mem_free = $self->cisco_mem_free() || {};
+
+    foreach my $mem_free_val ( values %$cisco_mem_free ) {
+        $mem_free += $mem_free_val;
+    }
+
+    return $mem_free;
+}
+
+sub mem_used {
+    my $self = shift;
+
+    my $mem_used;
+
+    my $cisco_mem_used = $self->cisco_mem_used() || {};
+
+    foreach my $mem_used_val ( values %$cisco_mem_used ) {
+        $mem_used += $mem_used_val;
+    }
+
+    return $mem_used;
+}
+
 sub mem_total {
     my $self = shift;
-    my $mem_free = $self->mem_free();
-    my $mem_used = $self->mem_used();
-    return undef unless defined $mem_free and defined $mem_used;
-    return $mem_free + $mem_used;
+
+    my $mem_total;
+
+    my $cisco_mem_free = $self->cisco_mem_free() || {};
+    my $cisco_mem_used = $self->cisco_mem_used() || {};
+
+    foreach my $mem_entry ( keys %$cisco_mem_free ) {
+        my $mem_free = $cisco_mem_free->{$mem_entry} || 0;
+        my $mem_used = $cisco_mem_used->{$mem_entry} || 0;
+        $mem_total += ( $mem_free + $mem_used );
+    }
+    return $mem_total;
+}
+
+sub flashmem_total {
+    my $self = shift;
+
+    my $flashmem_total;
+
+    my $flash_sizes = $self->cisco_flash_size;
+
+    foreach my $flash_index ( keys %$flash_sizes ) {
+        $flashmem_total += $flash_sizes->{$flash_index};
+    }
+
+    return $flashmem_total;
 }
 
 1;
@@ -140,23 +314,24 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::CiscoStats - Perl5 Interface to CPU and Memory stats for Cisco Devices
+SNMP::Info::CiscoStats - Perl5 Interface to CPU and Memory stats for Cisco
+Devices
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Eric Miller, Max Baker, Sam Stickland
 
 =head1 SYNOPSIS
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $ciscostats = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 2
-                        ) 
+                    AutoSpecify => 1,
+                    Debug       => 1,
+                    # These arguments are passed directly on to SNMP::Session
+                    DestHost    => 'myswitch',
+                    Community   => 'public',
+                    Version     => 2
+                    ) 
     or die "Can't connect to DestHost.\n";
 
  my $class      = $ciscostats->class();
@@ -164,24 +339,38 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-SNMP::Info::CiscoStats is a subclass of SNMP::Info that provides cpu, memory, os and
-version information about Cisco Devices. 
+SNMP::Info::CiscoStats is a subclass of SNMP::Info that provides cpu, memory,
+os and version information about Cisco Devices. 
 
 Use or create in a subclass of SNMP::Info.  Do not use directly.
 
 =head2 Inherited Classes
 
-none.
+None.
 
 =head2 Required MIBs
 
 =over
 
-=item CISCO-PROCESS-MIB
+=item F<CISCO-PRODUCTS-MIB>
 
-=item CISCO-MEMORY-POOL-MIB
+=item F<CISCO-PROCESS-MIB>
 
-=item RFC1213-MIB
+=item F<CISCO-MEMORY-POOL-MIB>
+
+=item F<SNMPv2-MIB>
+
+=item F<OLD-CISCO-SYSTEM-MIB>
+
+=item F<CISCO-STACK-MIB>
+
+=item F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
+
+=item F<CISCO-FLASH-MIB>
+
+=item F<ENTITY-MIB>
+
+=item F<CISCO-IMAGE-MIB>
 
 =back
 
@@ -207,67 +396,138 @@ Returns ios_cpu_5min() or cat_cpu5min(), whichever is available.
 
 Returns mem_free() + mem_used()
 
+=item $ciscostats->vendor()
+
+ 'cisco'
+
 =item $ciscostats->os()
 
-Trys to parse if device is running IOS or CatOS from description()
+Tries to parse if device is running 'IOS', 'CatOS', 'IOS-XE' or something else
+from description()
+
+Available values:
+
+ 'ios'          for Cisco IOS
+ 'ios-xe'       for Cisco IOS XE
+ 'pix'          for Cisco PIX
+ 'asa'          for Cisco ASA
+ 'fwsm'         for Single-mode FWSM
+ 'fwsm-admin'   for Admin context of multi-context FWSM
+ 'fwsm-context' for Standard context of multi-context FWSM
+ 'ace-admin'    for Admin context of ACE module
+ 'ace-context'  for Standard context of ACE module (NB: No OS version
+                     detection is available, but will be the same as it's
+                     'ace admin')
+ 'css'          for Cisco Content Switch
+ 'css-sca'      for Cisco Content Switch Secure Content Acceleration
+ 'san-os'       for Cisco SAN-OS
 
 =item $ciscostats->os_ver()
 
-Trys to parse device operating system version from description()
+Tries to parse device operating system version from description(), falls back
+to parsing C<CISCO-IMAGE-MIB::ciscoImageString> if needed
+
+=item $ciscostats->os_bin()
+
+Tries to parse C<ROMMON> version from rom_id() string
 
 =item $ciscostats->ios_cpu()
 
-Current CPU usage in percents of device.
+Current CPU usage in percent.
 
-B<1.3.6.1.4.1.9.2.1.56.0> = 
-B<OLD-CISCO-CPU-MIB:avgBusyPer>
+C<1.3.6.1.4.1.9.2.1.56.0> = 
+C<OLD-CISCO-CPU-MIB:avgBusyPer>
 
 =item $ciscostats->ios_cpu_1min()
 
-Average CPU Usage in percents of device over last minute.
+Average CPU Usage in percent over the last minute.
 
-B<1.3.6.1.4.1.9.2.1.57.0>
+C<1.3.6.1.4.1.9.2.1.57.0>
 
 =item $ciscostats->ios_cpu_5min()
 
-Average CPU Usage in percents of device over last 5 minutes.
+Average CPU Usage in percent over the last 5 minutes.
 
-B<1.3.6.1.4.1.9.2.1.58.0>
+C<1.3.6.1.4.1.9.2.1.58.0>
 
 =item $ciscostats->cat_cpu()
 
-Current CPU usage in percents of device.
+Current CPU usage in percent.
 
-B<CISCO-PROCESS-MIB::cpmCPUTotal5sec.9>
+C<CISCO-PROCESS-MIB::cpmCPUTotal5sec.9>
 
 =item $ciscostats->cat_cpu_1min()
 
-Average CPU Usage in percents of device over last minute.
+Average CPU Usage in percent over the last minute.
 
-B<CISCO-PROCESS-MIB::cpmCPUTotal1min.9>
+C<CISCO-PROCESS-MIB::cpmCPUTotal1min.9>
 
 =item $ciscostats->cat_cpu_5min()
 
-Average CPU Usage in percents of device over last 5 minutes.
+Average CPU Usage in percent over the last 5 minutes.
 
-B<CISCO-PROCESS-MIB::cpmCPUTotal5min.9>
+C<CISCO-PROCESS-MIB::cpmCPUTotal5min.9>
 
 =item $ciscostats->mem_free()
 
-Main DRAM free in device.  In bytes.
+Main DRAM free of the device in bytes.
 
-B<CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree.1>
+C<CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree>
 
 =item $ciscostats->mem_used()
 
-Main DRAM used in device.  In bytes.
+Main DRAM used of the device in bytes.
 
-B<CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed.1>
+C<CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed>
+
+=item $ciscostats->mem_total()
+
+Main DRAM of the device in bytes.
+
+C<CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree> +
+C<CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed>
+
+=item $ciscostats->flashmem_total()
+
+Flash memory of the device in bytes.
+
+C<CISCO-FLASH-MIB::ciscoFlashDeviceSize>
 
 =back
 
 =head1 TABLE METHODS
 
-None.
+=head2 Cisco Memory Pool Table (C<ciscoMemoryPoolTable>)
+
+=over
+
+=item $ciscostats->cisco_mem_free()
+
+The number of bytes from the memory pool that are currently unused on the
+managed device.
+
+(C<ciscoMemoryPoolFree>)
+
+=item $ciscostats->cisco_mem_used()
+
+The number of bytes from the memory pool that are currently in use by
+applications on the managed device.
+
+(C<ciscoMemoryPoolUsed>)
+
+=back
+
+=head2 Cisco Flash Device Table (C<ciscoFlashDeviceTable>)
+
+=over
+
+=item $ciscostats->cisco_flash_size()
+
+Total size of the Flash device.  For a removable device, the size will be
+zero if the device has been removed.
+
+(C<ciscoFlashDeviceSize>)
+
+=back
 
 =cut

Info/CiscoStpExtensions.pm

@@ -0,0 +1,355 @@
+# SNMP::Info::CiscoStpExtensions
+#
+# Copyright (c)2009 Carlos Vicente
+# All rights reserved.  
+#
+# Redistribution and use in source and binary forms, with or without 
+# modification, are permitted provided that the following conditions are met:
+# 
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright notice,
+#       this list of conditions and the following disclaimer in the documentation
+#       and/or other materials provided with the distribution.
+#     * Neither the name of the author nor the 
+#       names of its contributors may be used to endorse or promote products 
+#       derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::CiscoStpExtensions;
+
+use strict;
+
+use Exporter;
+use SNMP::Info;
+use SNMP::Info::Bridge;
+
+use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE %PORTSTAT $INIT/;
+
+$VERSION = '3.03';
+
+@SNMP::Info::CiscoStpExtensions::ISA = qw/SNMP::Info::Bridge SNMP::Info Exporter/;
+@SNMP::Info::CiscoStpExtensions::EXPORT_OK = qw//;
+
+%MIBS    = (
+            %SNMP::Info::Bridge::MIBS,
+            'CISCO-STP-EXTENSIONS-MIB' => 'stpxSpanningTreeType',
+           );
+
+%GLOBALS = (
+            %SNMP::Info::Bridge::GLOBALS,
+            'stpx_mst_config_digest' => 'stpxSMSTConfigDigest',
+            'stpx_mst_region_name'   => 'stpxMSTRegionName',
+            'stpx_mst_region_rev'    => 'stpxSMSTRegionRevision',
+            'stpx_stp_type'          => 'stpxSpanningTreeType',
+            'stpx_bpduguard_enable'  => 'stpxFastStartBpduGuardEnable',
+            'stpx_bpdufilter_enable' => 'stpxFastStartBpduFilterEnable',
+           );
+
+%FUNCS   = (
+            %SNMP::Info::Bridge::FUNCS,
+            'stpx_rootguard_enabled'      => 'stpxRootGuardConfigEnabled',
+            'stpx_loopguard_enabled'      => 'stpxLoopGuardConfigEnabled',
+            'stpx_port_bpduguard_mode'    => 'stpxFastStartPortBpduGuardMode',
+            'stpx_port_bpdufilter_mode'   => 'stpxFastStartPortBpduFilterMode',
+            'stpx_smst_root'              => 'stpxSMSTInstanceCISTRegionalRoot',
+            'stpx_smst_vlans_mapped_1k2k' => 'stpxSMSTInstanceVlansMapped1k2k',
+            'stpx_smst_vlans_mapped_3k4k' => 'stpxSMSTInstanceVlansMapped3k4k',
+           );
+
+%MUNGE   = (
+            %SNMP::Info::Bridge::MUNGE,
+           'stpx_mst_config_digest'     => \&SNMP::Info::CiscoStpExtensions::oct2str,
+           );
+
+
+# Report version of STP via standard method
+sub stp_ver {
+     my $self = shift;
+     my $stp_ver = $self->SUPER::stp_ver();
+     if ( !defined($stp_ver) || $stp_ver eq 'unknown' ){
+         if ( defined $self->stpx_stp_type() ){
+             $stp_ver = $self->stpx_stp_type();
+         }
+     }
+     return $stp_ver;
+}
+
+sub mst_config_digest {
+    my $self = shift;
+    return $self->stpx_mst_config_digest;
+}
+
+sub mst_region_name {
+    my $self = shift;
+    return $self->stpx_mst_region_name;
+}
+
+sub mst_region_rev {
+    my $self = shift;
+    return $self->stpx_mst_region_rev;
+}
+
+
+sub mst_vlan2instance {
+    my $self = shift;
+    
+    # Get MST vlan-to-instance mapping
+    my $m1k2k = $self->stpx_smst_vlans_mapped_1k2k;
+    my $m3k4k = $self->stpx_smst_vlans_mapped_3k4k;
+   
+    # Get list of VLANs
+    my $vlan_membership = $self->i_vlan_membership;
+    my @vlans;
+    foreach my $iid ( keys %$vlan_membership ){
+        if ( my $vm = $vlan_membership->{$iid} ){
+            foreach my $vid ( @$vm ){
+                push @vlans, $vid;
+            }
+        }
+    }
+    my %res;
+    foreach my $vlan ( @vlans ){
+        if ( $vlan < 2048 ){
+            foreach my $inst ( keys %$m1k2k ){
+                my $list = $m1k2k->{$inst};
+                my $vlanlist = [split(//, unpack("B*", $list))];
+                if ( @$vlanlist[$vlan] ){
+                    $res{$vlan} = $inst;
+                    last;
+                }
+            }
+        }else{
+            foreach my $inst ( keys %$m3k4k ){
+                my $list = $m3k4k->{$inst};
+                my $vlanlist = [split(//, unpack("B*", $list))];
+                if ( @$vlanlist[$vlan-2048] ){
+                    $res{$vlan} = $inst;
+                    last;
+                }
+            }       
+        }
+    }
+    return \%res;
+}
+
+sub i_rootguard_enabled {
+    my $self    = shift;
+    my $partial = shift;
+
+    my $rg_enabled = $self->stpx_rootguard_enabled();
+    my $bp_index   = $self->bp_index($partial);
+
+    my %res;
+    foreach my $index ( keys %$rg_enabled ){
+        my $enabled = $rg_enabled->{$index};
+        my $iid     = $bp_index->{$index};
+        next unless defined $iid;
+        next unless defined $enabled;
+        $res{$iid} = $enabled;
+    }
+    return \%res;
+}  
+
+sub i_loopguard_enabled {
+    my $self    = shift;
+    my $partial = shift;
+
+    my $lg_enabled = $self->stpx_loopguard_enabled();
+    my $bp_index   = $self->bp_index($partial);
+
+    my %res;
+    foreach my $index ( keys %$lg_enabled ){
+        my $enabled = $lg_enabled->{$index};
+        my $iid     = $bp_index->{$index};
+        next unless defined $iid;
+        next unless defined $enabled;
+        $res{$iid} = $enabled;
+    }
+    return \%res;
+}  
+
+sub i_bpduguard_enabled {
+    my $self    = shift;
+    my $partial = shift;
+
+    my $bpdugm_default = $self->stpx_bpduguard_enable();
+    my $bp_index       = $self->bp_index($partial);
+    my $bpdugm         = $self->stpx_port_bpduguard_mode();
+    
+    my %res;
+    foreach my $index ( keys %$bpdugm ){
+        my $mode = $bpdugm->{$index};
+        my $iid  = $bp_index->{$index};
+        next unless defined $iid;
+        next unless defined $mode;
+        if ( $mode eq 'default' ){
+            $res{$iid} =  $bpdugm_default;
+        }else{
+            $res{$iid} = $mode;
+        }
+    }
+    return \%res;
+}
+
+sub i_bpdufilter_enabled {
+    my $self    = shift;
+    my $partial = shift;
+
+    my $bpdufm_default = $self->stpx_bpdufilter_enable();
+    my $bp_index       = $self->bp_index($partial);
+    my $bpdufm         = $self->stpx_port_bpdufilter_mode();
+    
+    my %res;
+    foreach my $index ( keys %$bpdufm ){
+        my $mode = $bpdufm->{$index};
+        my $iid  = $bp_index->{$index};
+        next unless defined $iid;
+        next unless defined $mode;
+        if ( $mode eq 'default' ){
+            $res{$iid} =  $bpdufm_default;
+        }else{
+            $res{$iid} = $mode;
+        }
+    }
+    return \%res;
+}
+
+
+sub oct2str {
+    my ($v) = @_;
+    return sprintf('%s', unpack('H*', $v));
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::CiscoStpExtensions - SNMP Interface to C<CISCO-STP-EXTENSIONS-MIB>
+
+=head1 AUTHOR
+
+Carlos Vicente
+
+=head1 SYNOPSIS
+
+=head1 DESCRIPTION
+
+Create or use a subclass of SNMP::Info that inherits this class.  Do not use
+directly.
+
+For debugging you can call new() directly as you would in SNMP::Info 
+
+ my $stpx = new SNMP::Info::CiscoStpExtensions(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info 
+
+=item SNMP::Info::Bridge 
+
+=back
+
+MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $stpx->stp_ver()
+
+Returns the particular STP version running on this device.  
+Meant to override SNMP::Info::Brigde::stp_ver()
+
+Values: C<pvstPlus>, C<mistp>, C<mistpPvstPlus>, C<mst>, C<rapidPvstPlus>
+
+(C<stpxSpanningTreeType>)
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $stpx->mst_config_digest()
+
+Returns the Multiple Spanning Tree (MST) configuration digest 
+
+(C<stpxSMSTConfigDigest>)
+
+=item $stpx->mst_region_name()
+
+Returns the Multiple Spanning Tree (MST) region name 
+
+(C<stpxMSTRegionName>)
+
+=item $stpx->mst_region_rev()
+
+Returns the Multiple Spanning Tree (MST) region name 
+
+(C<stpxSMSTRegionRevision>)
+
+=item $stpx->mst_vlan2instance()
+
+Returns the mapping of vlan to MST instance in the form of a hash reference 
+with key = VLAN id, value = STP instance
+
+=item $stpx->i_rootguard_enabled()
+
+Returns 1 or 0 depending on whether C<RootGuard> is enabled on a given port.
+Format is a hash reference with key = C<ifIndex>, value = [1|0]
+
+(C<stpxRootGuardConfigEnabled>)
+
+=item $stpx->i_loopguard_enabled()
+
+Returns 1 or 0 depending on whether C<LoopGuard> is enabled on a given port.
+Format is a hash reference with key = C<ifIndex>, value = [1|0]
+
+(C<stpxLoopGuardConfigEnabled>)
+
+=item $stpx->i_bpduguard_enabled()
+
+Returns 1 or 0 depending on whether C<BpduGuard> is enabled on a given port.
+Format is a hash reference with key = C<ifIndex>, value = [1|0]
+
+(C<stpxFastStartPortBpduGuardMode>)
+
+=item $stpx->i_bpdufilter_enabled()
+
+Returns 1 or 0 depending on whether C<BpduFilter> is enabled on a given port.
+Format is a hash reference with key = C<ifIndex>, value = [1|0]
+
+(C<stpxFastStartBpduFilterEnable>)
+
+=back
+
+=head1 MUNGES
+
+=over
+
+=item oct2str()
+
+Unpacks H* into a string
+
+=back
+
+=cut

Info/EDP.pm

@@ -0,0 +1,295 @@
+# SNMP::Info::EDP
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+
+package SNMP::Info::EDP;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::LLDP::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::LLDP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    'EXTREME-EDP-MIB'   => 'extremeEdpPortIfIndex',
+);
+
+%GLOBALS = (
+
+);
+
+%FUNCS = (
+    # EXTREME-EDP-MIB::extremeEdpTable
+    'edp_rem_sysname'  => 'extremeEdpNeighborName',
+);
+
+%MUNGE = (
+    'edp_rem_sysname'   => \&SNMP::Info::munge_null,
+);
+
+sub hasEDP {
+    my $edp = shift;
+
+    my $edp_ip = $edp->extremeEdpNeighborVlanIpAddress() || {};
+
+    return 1 if ( scalar( keys %$edp_ip ) );
+    
+    return;
+}
+
+# Since we need to get IP Addresses from the extremeEdpNeighborTable which has
+# a different index (adds VLAN name) than the extremeEdpTable which holds
+# the remote device details use the index from extremeEdpNeighborTable but skip
+# indexes which have an address of 0.0.0.0.  Would like to include only one
+# address since they should all originate from the same device, but we don't
+# know if they would all be reachable from the network management application.
+#
+# We don't inplement partials since this is private index function
+sub _edp_index {
+    my $edp = shift;
+
+    my $edp_ip  = $edp->extremeEdpNeighborVlanIpAddress() || {};
+    
+    my %edp_index;
+    foreach my $key ( keys %$edp_ip ) {
+        my $ip = $edp_ip->{$key};
+        next if ($ip eq '0.0.0.0');
+        next unless $ip;
+        $edp_index{$key} = $key;
+    }
+    return \%edp_index;
+}
+
+sub edp_if {
+    my $edp = shift;
+
+    my $index = $edp->_edp_index() || {};
+
+    my %edp_if;
+    foreach my $key (keys %$index) {
+        my $iid = $key;
+        # ifIndex is first part of the iid
+        $iid = $1 if $iid =~ /^(\d+)\./;
+        $edp_if{$key} = $iid;
+    }
+ 
+  return \%edp_if;
+}
+
+sub edp_ip {
+    my $edp = shift;
+
+    my $index  = $edp->_edp_index() || {};
+    my $edp_ip = $edp->extremeEdpNeighborVlanIpAddress() || {};
+
+    my %edp_ip;
+    foreach my $key ( keys %$index ) {
+        my $ip = $edp_ip->{$key};
+        # MIB says should only be IPv4
+        next unless ($ip =~ /\d+(\.\d+){3}/);
+        $edp_ip{$key} = $ip;
+    }
+    return \%edp_ip;
+}
+
+sub edp_port {
+    my $edp = shift;
+
+    my $index    = $edp->_edp_index() || {};
+    my $edp_rport = $edp->extremeEdpNeighborPort() || {};
+    my $edp_rslot = $edp->extremeEdpNeighborSlot() || {};
+
+    my %edp_port;
+    foreach my $key ( sort keys %$edp_rport ) {
+        my $port = $edp_rport->{$key};
+        my $slot = $edp_rslot->{$key} || 0;
+        next unless $port;
+        my $slotport = defined $slot ?  "$slot\/$port" : $port;
+
+        foreach my $iid ( sort keys %$index ) {
+            $edp_port{$iid} = $slotport if ($iid =~ /^$key/);
+        }
+    }
+    return \%edp_port;
+}
+
+sub edp_id {
+    my $edp = shift;
+
+    my $index    = $edp->_edp_index() || {};
+    my $edp_name = $edp->edp_rem_sysname() || {};
+
+    my %edp_name;
+    foreach my $key ( sort keys %$edp_name ) {
+        my $name = $edp_name->{$key} || 0;
+        next unless $name;
+
+        foreach my $iid ( sort keys %$index ) {
+            $edp_name{$iid} = $name if ($iid =~ /^$key/);
+        }
+    }
+    return \%edp_name;
+}
+
+sub edp_ver {
+    my $edp = shift;
+
+    my $index   = $edp->_edp_index() || {};
+    my $edp_ver = $edp->extremeEdpNeighborSoftwareVersion() || {};
+
+    my %edp_ver;
+    foreach my $key ( sort keys %$edp_ver ) {
+        my $ver = $edp_ver->{$key} || 0;
+        next unless $ver;
+
+        foreach my $iid ( sort keys %$index ) {
+            $edp_ver{$iid} = $ver if ($iid =~ /^$key/);
+        }
+    }
+    return \%edp_ver;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::EDP - SNMP Interface to the Extreme Discovery Protocol (EDP)
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ my $edp = new SNMP::Info ( 
+                             AutoSpecify => 1,
+                             Debug       => 1,
+                             DestHost    => 'router', 
+                             Community   => 'public',
+                             Version     => 2
+                           );
+
+ my $class = $edp->class();
+ print " Using device sub class : $class\n";
+
+ $haslldp   = $edp->hasLLDP() ? 'yes' : 'no';
+
+ # Print out a map of device ports with LLDP neighbors:
+ my $interfaces    = $edp->interfaces();
+ my $edp_if       = $edp->edp_if();
+ my $edp_ip       = $edp->edp_ip();
+ my $edp_port     = $edp->edp_port();
+
+ foreach my $edp_key (keys %$edp_ip){
+    my $iid           = $edp_if->{$edp_key};
+    my $port          = $interfaces->{$iid};
+    my $neighbor      = $edp_ip->{$edp_key};
+    my $neighbor_port = $edp_port->{$edp_key};
+    print "Port : $port connected to $neighbor / $neighbor_port\n";
+ }
+
+=head1 DESCRIPTION
+
+SNMP::Info::EDP is a subclass of SNMP::Info that provides an object oriented 
+interface to EDP information through SNMP.
+
+EDP is a Layer 2 protocol that allows a network device to advertise its
+identity and capabilities on the local network providing topology information.
+
+Create or use a device subclass that inherits this class.  Do not use
+directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<EXTREME-EDP-MIB>
+
+=back
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $edp->hasEDP()
+
+Is EDP is active in this device?  
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $edp->edp_id()
+
+Returns the string value used to identify the chassis component associated
+with the remote system.
+
+(C<extremeEdpNeighborName>)
+
+=item $edp->edp_if()
+
+Returns the mapping to the SNMP Interface Table.
+
+=item  $edp->edp_ip()
+
+Returns remote IPv4 address.
+
+=item $edp->edp_port()
+
+Returns remote port ID
+
+=item $edp->edp_ver()
+
+Returns the operating system version of the remote system.
+
+Nulls are removed before the value is returned. 
+
+(C<extremeEdpNeighborSoftwareVersion>)
+
+=back
+
+=cut
+

Info/Entity.pm

@@ -1,77 +1,102 @@
 # SNMP::Info::Entity
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Entity;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 
-use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
-@SNMP::Info::Entity::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::Entity::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::Entity::EXPORT_OK = qw//;
 
-$INIT    = 0;
-%MIBS    = ('ENTITY-MIB' => 'entPhysicalSerialNum');
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-%GLOBALS = (
-           );
+$VERSION = '3.03';
 
-%FUNCS   = (
-            'e_class'   => 'entPhysicalClass',
-            'e_descr'   => 'entPhysicalDescr',
-            'e_fwver'   => 'entPhysicalFirmwareRev',
-            'e_hwver'   => 'entPhysicalHardwareRev',
-            'e_map'     => 'entAliasMappingIdentifier',
-            'e_model'   => 'entPhysicalModelName',
-            'e_name'    => 'entPhysicalName',
-            'e_parent'  => 'entPhysicalContainedIn',
-            'e_serial'  => 'entPhysicalSerialNum',
-            'e_swver'   => 'entPhysicalSoftwareRev',
-            'e_type'    => 'entPhysicalVendorType',
-           );
+%MIBS = ( 'ENTITY-MIB' => 'entPhysicalSerialNum' );
 
-%MUNGE   = (
-           );
+%GLOBALS = ();
+
+%FUNCS = (
+    'e_alias'  => 'entPhysicalAlias',
+    'e_class'  => 'entPhysicalClass',
+    'e_descr'  => 'entPhysicalDescr',
+    'e_fwver'  => 'entPhysicalFirmwareRev',
+    'e_fru'    => 'entPhysicalIsFRU',
+    'e_hwver'  => 'entPhysicalHardwareRev',
+    'e_id'     => 'entPhysicalAssetID',
+    'e_map'    => 'entAliasMappingIdentifier',
+    'e_model'  => 'entPhysicalModelName',
+    'e_name'   => 'entPhysicalName',
+    'e_parent' => 'entPhysicalContainedIn',
+    'e_pos'    => 'entPhysicalParentRelPos',
+    'e_serial' => 'entPhysicalSerialNum',
+    'e_swver'  => 'entPhysicalSoftwareRev',
+    'e_type'   => 'entPhysicalVendorType',
+    'e_vendor' => 'entPhysicalMfgName',
+);
+
+%MUNGE = ( 'e_type' => \&SNMP::Info::munge_e_type, );
+
+# entPhysicalIndex is not-accessible.  Create to facilitate emulation methods
+# in other classes
+
+sub e_index {
+    my $entity  = shift;
+    my $partial = shift;
+
+    # Force use of MIB leaf to avoid inheritance issues in psuedo classes
+    my $e_descr = $entity->entPhysicalDescr($partial);
+
+    return unless ($e_descr);
+
+    my %e_index;
+
+    foreach my $iid ( keys %$e_descr ) {
+        $e_index{$iid} = $iid;
+    }
+    return \%e_index;
+}
 
 sub e_port {
-    my $entity = shift;
-    my $e_map  = $entity->e_map();
+    my $entity  = shift;
+    my $partial = shift;
+
+    my $e_map = $entity->e_map($partial);
 
     my %e_port;
 
-    foreach my $e_id (keys %$e_map) {
+    foreach my $e_id ( keys %$e_map ) {
         my $id = $e_id;
         $id =~ s/\.0$//;
 
@@ -83,15 +108,18 @@ sub e_port {
 
     return \%e_port;
 }
+
 1;
 
+__END__
+
 =head1 NAME
 
-SNMP::Info::Entity - Perl5 Interface to SNMP data stored in ENTITY-MIB.
+SNMP::Info::Entity - SNMP Interface to data stored in F<ENTITY-MIB>. RFC 2737
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -99,7 +127,6 @@ Max Baker (C<max@warped.org>)
  my $entity = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -111,11 +138,15 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-ENTITY-MIB is used by some Layer 2 devices like HP Switches and Aironet Access Points
+F<ENTITY-MIB> is used by Layer 2 devices from Brocade, Cisco, HP,
+and more.
+
+See RFC 2737 for full details.
 
 Create or use a device subclass that inherit this class.  Do not use directly.
 
-For debugging purposes you can call this class directly as you would SNMP::Info
+For debugging purposes you can call this class directly as you would
+SNMP::Info
 
  my $entity = new SNMP::Info::Entity (...);
 
@@ -127,7 +158,7 @@ none.
 
 =over
 
-=item ENTITY-MIB
+=item F<ENTITY-MIB>
 
 =back
 
@@ -146,43 +177,85 @@ to a hash.
 
 =over
 
+=item $entity->e_index()
+
+Index
+
+(C<entPhysicalIndex>)
+
+=item $entity->e_alias()
+
+Human entered, not usually used.
+
+(C<entPhysicalAlias>)
+
 =item $entity->e_class()
 
+Stack, Module, Container, Port ...
+
 (C<entPhysicalClass>)
 
 =item $entity->e_descr()
 
+Human Friendly
+
 (C<entPhysicalClass>)
 
 =item $entity->e_fwver()
 
 (C<entPhysicalFirmwareRev>)
 
+=item $entity->e_fru()
+
+BOOLEAN. Is a Field Replaceable unit?
+
+(C<entPhysicalFRU>)
+
 =item $entity->e_hwver()
 
 (C<entPhysicalHardwareRev>)
 
+=item $entity->e_id()
+
+This is human entered and not normally used.
+
+(C<entPhysicalAssetID>)
+
 =item $entity->e_map()
 
+See MIB.
+
 (C<entAliasMappingIdentifier>)
 
 =item $entity->e_model()
 
+Model Name of Entity.
+
 (C<entPhysicalModelName>)
 
 =item $entity->e_name()
 
+More computer friendly name of entity.  Parse me.
+
 (C<entPhysicalName>)
 
 =item $entity->e_parent()
 
+0 if root.
+
 (C<entPhysicalContainedIn>)
 
 =item $entity->e_port()
 
-Maps EntityTable entries to the Interface Table (IfTable) using
+Maps Entity Table entries to the Interface Table (C<IfTable>) using
 $entity->e_map()
 
+=item $entity->e_pos()
+
+The relative position among all entities sharing the same parent.
+
+(C<entPhysicalParentRelPos>)
+
 =item $entity->e_serial()
 
 (C<entPhysicalSerialNum>)
@@ -193,8 +266,17 @@ $entity->e_map()
 
 =item $entity->e_type()
 
+This is an OID, which gets munged into the object name if the right
+MIB is loaded.
+
 (C<entPhysicalVendorType>)
 
+=item $entity->e_vendor()
+
+Vendor of Module.
+
+(C<entPhysicalMfgName>)
+
 =back
 
 =cut

Info/EtherLike.pm

@@ -1,81 +1,86 @@
 # SNMP::Info::EtherLike
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::EtherLike;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 
-use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
-@SNMP::Info::EtherLike::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::EtherLike::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::EtherLike::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$INIT = 0;
+$VERSION = '3.03';
 
-# Same info in both rfc1398 and this?
-%MIBS = ('ETHERLIKE-MIB' => 'etherMIB' );
+%MIBS = ( 'EtherLike-MIB' => 'etherMIB' );
 
 %GLOBALS = ();
 
 %FUNCS = (
-          # EtherLike StatsTable
-          'el_chipset'         => 'dot3StatsEtherChipSet',
-          'el_coll_excess'     => 'dot3StatsExcessiveCollisions',
-          'el_coll_late'       => 'dot3StatsLateCollisions',
-          'el_coll_mult'       => 'dot3StatsMultipleCollisionFrames',
-          'el_coll_single'     => 'dot3StatsSingleCollisionFrames',
-          'el_duplex'          => 'dot3StatsDuplexStatus',
-          'el_error_alignment' => 'dot3StatsAlignmentErrors',
-          'el_error_fcs'       => 'dot3StatsFCSErrors',
-          'el_error_cs'        => 'dot3StatsCarrierSenseErrors',
-          'el_error_frame'     => 'dot3StatsFrameTooLongs',
-          'el_error_mac_rec'   => 'dot3StatsInternalMacReceiveErrors',
-          'el_error_mac_xmit'  => 'dot3StatsInternalMacTransmitErrors',
-          'el_error_sqe'       => 'dot3StatsSQETestErrors',
-          'el_error_symbol'    => 'dot3StatsSymbolErrors',
-          'el_index'           => 'dot3StatsIndex',
-          'el_xmit_defer'      => 'dot3StatsDeferredTransmissions',
-          # Ethernet-like Collision Statistics Group
-          'el_coll_count'      => 'dot3CollCount',
-          'el_coll_freq'       => 'dot3CollFrequencies'
-          );
 
-%MUNGE = ( %SNMP::Info::MUNGE );
+    # EtherLike StatsTable
+    'el_chipset'         => 'dot3StatsEtherChipSet',
+    'el_coll_excess'     => 'dot3StatsExcessiveCollisions',
+    'el_coll_late'       => 'dot3StatsLateCollisions',
+    'el_coll_mult'       => 'dot3StatsMultipleCollisionFrames',
+    'el_coll_single'     => 'dot3StatsSingleCollisionFrames',
+    'el_duplex'          => 'dot3StatsDuplexStatus',
+    'el_error_alignment' => 'dot3StatsAlignmentErrors',
+    'el_error_fcs'       => 'dot3StatsFCSErrors',
+    'el_error_cs'        => 'dot3StatsCarrierSenseErrors',
+    'el_error_frame'     => 'dot3StatsFrameTooLongs',
+    'el_error_mac_rec'   => 'dot3StatsInternalMacReceiveErrors',
+    'el_error_mac_xmit'  => 'dot3StatsInternalMacTransmitErrors',
+    'el_error_sqe'       => 'dot3StatsSQETestErrors',
+    'el_error_symbol'    => 'dot3StatsSymbolErrors',
+    'el_index'           => 'dot3StatsIndex',
+    'el_xmit_defer'      => 'dot3StatsDeferredTransmissions',
+
+    # Ethernet-like Collision Statistics Group
+    'el_coll_count' => 'dot3CollCount',
+    'el_coll_freq'  => 'dot3CollFrequencies'
+);
+
+%MUNGE = ( %SNMP::Info::MUNGE, 'el_duplex' => \&munge_el_duplex, );
+
+sub munge_el_duplex {
+    my $duplex = shift;
+    return unless defined $duplex;
+
+    $duplex =~ s/Duplex$//;
+    return $duplex;
+}
 
 1;
 __END__
@@ -83,11 +88,11 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::EtherLike - Perl5 Interface to SNMP ETHERLIKE-MIB 
+SNMP::Info::EtherLike - SNMP Interface to SNMP F<ETHERLIKE-MIB> RFC 1398
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -102,7 +107,8 @@ Max Baker (C<max@warped.org>)
  my $class = $cdp->class();
  print " Using device sub class : $class\n";
 
- # Find the duplex setting for a port on a device that implements ETHERLIKE-MIB
+ # Find the duplex setting for a port on a device that implements
+ # ETHERLIKE-MIB
  my $interfaces = $el->interfaces();
  my $el_index   = $el->el_index();
  my $el_duplex  = $el->el_duplex(); 
@@ -112,19 +118,19 @@ Max Baker (C<max@warped.org>)
     my $iid    = $el_index->{$el_port};
     my $port   = $interfaces->{$iid};
 
-    $duplex = 'half' if $duplex =~/half/i;
-    $duplex = 'full' if $duplex =~/full/i;
-    $duplex = 'auto' if $duplex =~/auto/i;
-
     print "PORT:$port set to duplex:$duplex\n";
  }
 
 =head1 DESCRIPTION
 
 SNMP::Info::EtherLike is a subclass of SNMP::Info that supplies 
-access to the ETHERLIKE-MIB used by some Layer 3 Devices such as Cisco routers.
+access to the F<ETHERLIKE-MIB> used by some Layer 3 Devices such as
+Cisco routers.
 
-Use or create a subclass of SNMP::Info that inherits this one.  Do not use directly.
+See RFC 1398 for more details.
+
+Use or create a subclass of SNMP::Info that inherits this one.  Do not use
+directly.
 
 =head2 Inherited Classes
 
@@ -134,7 +140,7 @@ None.
 
 =over
 
-=item ETHERLIKE-MIB
+=item F<ETHERLIKE-MIB>
 
 =back
 
@@ -155,7 +161,7 @@ These are methods that return scalar values from SNMP
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 ETHERLIKE STATS TABLE (dot3StatsTable)
+=head2 ETHERLIKE STATS TABLE (C<dot3StatsTable>)
 
 =over
 
@@ -163,77 +169,87 @@ to a hash.
 
 Returns reference to hash. Indexes Stats Table to the interface index (iid).
 
-(B<dot3StatsIndex>)
+(C<dot3StatsIndex>)
 
 =item $el->el_duplex()
 
 Returns reference to hash.  Indexes Stats Table to Duplex Status of port.
 
-(B<dot3StatsDuplexStatus>)
+(C<dot3StatsDuplexStatus>)
 
 =item $el->el_chipset()
 
-(B<dot3StatsEtherChipSet>)
+(C<dot3StatsEtherChipSet>)
 
 =item $el->el_coll_excess()
 
-(B<dot3StatsExcessiveCollisions>)
+(C<dot3StatsExcessiveCollisions>)
 
 =item $el->el_coll_late()
 
-(B<dot3StatsLateCollisions>)
+(C<dot3StatsLateCollisions>)
 
 =item $el->el_coll_mult()
 
-(B<dot3StatsMultipleCollisionFrames>)
+(C<dot3StatsMultipleCollisionFrames>)
 
 =item $el->el_coll_single()
 
-(B<dot3StatsSingleCollisionFrames>)
+(C<dot3StatsSingleCollisionFrames>)
 
 =item $el->el_error_alignment()
 
-(B<dot3StatsAlignmentErrors>)
+(C<dot3StatsAlignmentErrors>)
 
 =item $el->el_error_fcs()
 
-(B<dot3StatsFCSErrors>)
+(C<dot3StatsFCSErrors>)
 
 =item $el->el_error_cs()
 
-(B<dot3StatsCarrierSenseErrors>)
+(C<dot3StatsCarrierSenseErrors>)
 
 =item $el->el_error_frame()
 
-(B<dot3StatsFrameTooLongs>)
+(C<dot3StatsFrameTooLongs>)
 
 =item $el->el_error_mac_rec()
 
-(B<dot3StatsInternalMacReceiveErrors>)
+(C<dot3StatsInternalMacReceiveErrors>)
 
 =item $el->el_error_mac_xmit()
 
-(B<dot3StatsInternalMacTransmitErrors>)
+(C<dot3StatsInternalMacTransmitErrors>)
 
 =item $el->el_error_sqe()
 
-(B<dot3StatsSQETestErrors>)
+(C<dot3StatsSQETestErrors>)
 
 =item $el->el_error_symbol()
 
-(B<dot3StatsSymbolErrors>)
+(C<dot3StatsSymbolErrors>)
 
 =item $el->el_xmit_defer()
 
-(B<dot3StatsDeferredTransmissions>)
+(C<dot3StatsDeferredTransmissions>)
 
 =item $el->el_coll_count()
 
-(B<dot3CollCount>)
+(C<dot3CollCount>)
 
 =item $el->el_coll_freq()
 
-(B<dot3CollFrequencies>)
+(C<dot3CollFrequencies>)
+
+=back
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item $el->munge_el_duplex()
+
+Removes 'Duplex' from the end of a string.
 
 =back
 

Info/FDP.pm

@@ -1,144 +1,129 @@
 # SNMP::Info::FDP
-# Bruce Rodger
 # $Id$
 #
-# (c) 2004 Bruce Rodger, Max Baker 
-# All rights reserved.  
+# Copyright (c) 2008 Bruce Rodger, Max Baker
+# All rights reserved.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::FDP;
-$VERSION = 0.9;
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
-use Carp;
 
-@SNMP::Info::FDP::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::FDP::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::FDP::EXPORT_OK = qw//;
 
-use vars qw/$VERSION $DEBUG %FUNCS %GLOBALS %MIBS %MUNGE $INIT/;
-# Debug
-$DEBUG=1;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-# Five data structures required by SNMP::Info
-$INIT = 0;
-%MIBS 	= ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' );
+$VERSION = '3.03';
+
+%MIBS = ( 'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snFdpGlobalRun' );
 
-# Notice we dont inherit the default GLOBALS and FUNCS
-# only the default MUNGE.
 %GLOBALS = (
-            # CDP-Compatibility
-            'cdp_run'      => 'snFdpGlobalRun',
-            'cdp_interval' => 'snFdpGlobalMessageInterval',
-            'cdp_holdtime' => 'snFdpGlobalHoldTime',
-            'cdp_id'       => 'snFdpGlobalDeviceId',
-            #
-            'fdp_run'      => 'snFdpGlobalRun',
-            'fdp_interval' => 'snFdpGlobalMessageInterval',
-            'fdp_holdtime' => 'snFdpGlobalHoldTime',
-            'fdp_id'       => 'snFdpGlobalDeviceId',
-           );
+    'fdp_run'      => 'snFdpGlobalRun',
+    'fdp_interval' => 'snFdpGlobalMessageInterval',
+    'fdp_holdtime' => 'snFdpGlobalHoldTime',
+    'fdp_id'       => 'snFdpGlobalDeviceId',
+);
 
-%FUNCS  = (
-            'c_index'        => 'snFdpCacheIfIndex',
-            'c_proto'        => 'snFdpCacheAddressType',
-            'c_ip'           => 'snFdpCacheAddress',
-            'c_ver'          => 'snFdpCacheVersion',
-            'c_id'           => 'snFdpCacheDeviceId',
-            'c_port'         => 'snFdpCacheDevicePort',
-            'c_platform'     => 'snFdpCachePlatform',
-            'c_capabilities' => 'snFdpCacheCapabilities',
-            'c_domain'       => 'snFdpCacheVTPMgmtDomain',
-            'c_vlan'         => 'snFdpCacheNativeVLAN',
-            'c_duplex'       => 'snFdpCacheDuplex'
-          );
+%FUNCS = (
+    'fdp_index'        => 'snFdpCacheIfIndex',
+    'fdp_proto'        => 'snFdpCacheAddressType',
+    'fdp_ip'           => 'snFdpCacheAddress',
+    'fdp_ver'          => 'snFdpCacheVersion',
+    'fdp_id'           => 'snFdpCacheDeviceId',
+    'fdp_port'         => 'snFdpCacheDevicePort',
+    'fdp_platform'     => 'snFdpCachePlatform',
+    'fdp_capabilities' => 'snFdpCacheCapabilities',
+    'fdp_domain'       => 'snFdpCacheVTPMgmtDomain',
+    'fdp_vlan'         => 'snFdpCacheNativeVLAN',
+    'fdp_duplex'       => 'snFdpCacheDuplex',
+);
 
 %MUNGE = (
-          'c_capabilities' => \&munge_caps,
-          'c_ip'           => \&SNMP::Info::munge_ip
-         );
+    'fdp_capabilities' => \&SNMP::Info::munge_caps,
+    'fdp_ip'           => \&SNMP::Info::munge_ip
+);
 
+sub fdp_run {
+    my $fdp     = shift;
+    my $fdp_run = $fdp->orig_fdp_run();
 
-sub munge_caps {
-    my $caps = shift;
-    return undef unless defined $caps;
-
-    my $bits = substr(unpack("B*",$caps),-7);
-    return $bits;
-    
-    
+    # if fdp_run isn't implemented on device, assume FDP is on
+    return $fdp_run if defined $fdp_run;
+    return 1;
 }
+
 sub hasFDP {
     my $fdp = shift;
 
     my $ver = $fdp->{_version};
+
     #my $ver = $fdp->fdp_ver;
 
-
-
     # SNMP v1 clients dont have the globals
-    if (defined $ver and $ver == 1){
+    if ( defined $ver and $ver == 1 ) {
         my $fdp_ip = $fdp->fdp_ip();
+
         # See if anything in fdp cache, if so we have fdp
-        return 1 if (defined $fdp_ip and scalar(keys %$fdp_ip)) ;
-        return undef;
+        return 1 if ( defined $fdp_ip and scalar( keys %$fdp_ip ) );
+        return;
     }
-    
+
     return $fdp->fdp_run();
 }
 
-sub c_if {
-    my $fdp  = shift;
-
-
+sub fdp_if {
+    my $fdp = shift;
 
     # See if by some miracle Cisco implemented the fdpCacheIfIndex entry
-    my $fdp_index     = $fdp->fdp_index();
+    my $fdp_index = $fdp->fdp_index();
     return $fdp_index if defined $fdp_index;
 
     # Nope, didn't think so. Now we fake it.
-    my $fdp_ip = $fdp->c_ip();
-    unless (defined $fdp_ip){
-        $fdp->{error} = "SNMP::Info::FDP:fdp_if() - Device doesn't have fdp_ip() data.  Can't fake fdp_index()";
-        $DEBUG and carp($fdp->error(1));
-        return undef;
+    my $fdp_ip = $fdp->fdp_ip();
+    unless ( defined $fdp_ip ) {
+        $fdp->error_throw(
+            "SNMP::Info::FDP:fdp_if() - Device doesn't have fdp_ip() data.  Can't fake fdp_index()"
+        );
+        return;
     }
 
     my %fdp_if;
-    foreach my $key (keys %$fdp_ip){
-      next unless defined $key;
-      my $iid = $key;
-      # Truncate .1 from fdp cache entry
-      $iid =~ s/\.\d+$//;
-      $fdp_if{$key} = $iid;
+    foreach my $key ( keys %$fdp_ip ) {
+        next unless defined $key;
+        my $iid = $key;
+
+        # Truncate .1 from fdp cache entry
+        $iid =~ s/\.\d+$//;
+        $fdp_if{$key} = $iid;
     }
 
     return \%fdp_if;
@@ -149,11 +134,12 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::FDP - Perl5 Interface to Foundry Discovery Protocol (FDP) using SNMP
+SNMP::Info::FDP - SNMP Interface to Foundry Discovery Protocol (FDP) using
+SNMP
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Bruce Rodger, Max Baker
 
 =head1 SYNOPSIS
 
@@ -192,10 +178,10 @@ interface to FDP information through SNMP.
 FDP is a Layer 2 protocol that supplies topology information of
 devices that also speak FDP, mostly switches and routers.  It has
 similar functionality to Cisco's CDP, and the SNMP interface is
-virtually identical.  FDP is implemented in Foundry devices, including
-the Bigiron and Fastiron range.
+virtually identical.  FDP is implemented in Brocade (Foundry) devices.
 
-Create or use a device subclass that inherits this class.  Do not use directly.
+Create or use a device subclass that inherits this class.  Do not use
+directly.
 
 Each device implements a subset of the global and cache entries. 
 Check the return value to see if that data is held by the device.
@@ -208,17 +194,13 @@ None.
 
 =over
 
-=item FOUNDRY-SN-SWITCH-GROUP-MIB
+=item F<FOUNDRY-SN-SWITCH-GROUP-MIB>
 
 Needs a reasonably recent MIB. Works OK with B2R07604A.mib, but doesn't
 work with B2R07600C. 
 
-
 =back
 
-MIBs are normally distributed with each code update. Contact your vendor,
-or trawl through google...
-
 =head1 GLOBAL METHODS
 
 These are methods that return scalar values from SNMP
@@ -235,27 +217,61 @@ Accounts for SNMP version 1 devices which may have FDP but not fdp_run()
 
 Is FDP enabled on this device?  
 
-(B<fdpGlobalRun>)
+(C<fdpGlobalRun>)
 
 =item $fdp->fdp_interval()
 
 Interval in seconds at which FDP messages are generated.
 
-(B<fdpGlobalMessageInterval>)
+(C<fdpGlobalMessageInterval>)
 
 =item $fdp->fdp_holdtime()
 
 Time in seconds that FDP messages are kept. 
 
-(B<fdpGlobalHoldTime>)
+(C<fdpGlobalHoldTime>)
 
 =item  $fdp->fdp_id() 
 
 Returns FDP device ID.  
 
-This is the device id broadcast via FDP to other devices, and is what is retrieved from remote devices with $fdp->id().
+This is the device id broadcast via FDP to other devices, and is what is
+retrieved from remote devices with $fdp->id().
 
-(B<fdpGlobalDeviceId>)
+(C<fdpGlobalDeviceId>)
+
+=back
+
+=head2 Overrides
+
+CDP compatibility
+
+=over
+
+=item $fdp->fdp_interval()
+
+Interval in seconds at which FDP messages are generated.
+
+(C<fdpGlobalMessageInterval>)
+
+=item $fdp->fdp_holdtime()
+
+Time in seconds that FDP messages are kept. 
+
+(C<fdpGlobalHoldTime>)
+
+=item  $fdp->fdp_id() 
+
+Returns FDP device ID.  
+
+This is the device id broadcast via FDP to other devices, and is what is
+retrieved from remote devices with $fdp->id().
+
+(C<fdpGlobalDeviceId>)
+
+=item $fdp->fdp_run()
+
+Is FDP enabled on this device?
 
 =back
 
@@ -264,7 +280,9 @@ This is the device id broadcast via FDP to other devices, and is what is retriev
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 FDP CACHE ENTRIES
+=head2 Overrides
+
+CDP compatibility
 
 =over
 
@@ -282,51 +300,59 @@ From L<http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb/frames.htm#1884
 
 =item (0x40) - Provides level 1 functionality.
 
-=item (0x20) - The bridge or switch does not forward IGMP Report packets on nonrouter ports.
+=item (0x20) - The bridge or switch does not forward IGMP Report packets on
+non router ports.
 
-=item (0x10) - Sends and receives packets for at least one network layer protocol. If the device is routing the protocol, this bit should not be set.
+=item (0x10) - Sends and receives packets for at least one network layer
+protocol. If the device is routing the protocol, this bit should not be set.
 
-=item (0x08) - Performs level 2 switching. The difference between this bit and bit 0x02 is that a switch does not run the Spanning-Tree Protocol. This device is assumed to be deployed in a physical loop-free topology.
+=item (0x08) - Performs level 2 switching. The difference between this bit
+and bit 0x02 is that a switch does not run the Spanning-Tree Protocol. This
+device is assumed to be deployed in a physical loop-free topology.
 
-=item (0x04) - Performs level 2 source-route bridging. A source-route bridge would set both this bit and bit 0x02.
+=item (0x04) - Performs level 2 source-route bridging. A source-route bridge
+would set both this bit and bit 0x02.
 
 =item (0x02) - Performs level 2 transparent bridging.
 
-=item (0x01) - Performs level 3 routing for at least one network layer protocol.
+=item (0x01) - Performs level 3 routing for at least one network layer
+protocol.
 
 =back
 
-Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to this information.
+Thanks to Martin Lorensen C<martin -at- lorensen.dk> for a pointer to
+this information.
 
-(B<fdpCacheCapabilities>)
+(C<fdpCacheCapabilities>)
 
 =item $fdp->fdp_domain()
 
-The CDP version of this returns remote VTP Management Domain as defined in CISCO-VTP-MIB::managementDomainName
+The CDP version of this returns remote VTP Management Domain as defined
+in C<CISCO-VTP-MIB::managementDomainName>
 
-(B<fdpCacheVTPMgmtDomain>)
+(C<fdpCacheVTPMgmtDomain>)
 
 =item $fdp->fdp_duplex() 
 
 Returns the port duplex status from remote devices.
 
-(B<fdpCacheDuplex>)
+(C<fdpCacheDuplex>)
 
 =item $fdp->fdp_id()
 
 Returns remote device id string
 
-(B<fdpCacheDeviceId>)
+(C<fdpCacheDeviceId>)
 
 =item $fdp->fdp_if()
 
 Returns the mapping to the SNMP Interface Table.
 
-Note that a lot devices don't implement $fdp->fdp_index(),  So if it isn't around,
-we fake it. 
+Note that a lot devices don't implement $fdp->fdp_index(),  So if it isn't
+around, we fake it. 
 
-In order to map the fdp table entry back to the interfaces() entry, we truncate the last number
-off of it :
+In order to map the fdp table entry back to the interfaces() entry, we
+truncate the last number off of it :
 
   # it exists, yay.
   my $fdp_index     = $device->fdp_index();
@@ -350,47 +376,48 @@ off of it :
 
 Returns the mapping to the SNMP2 Interface table for FDP Cache Entries. 
 
-Most devices don't implement this, so you probably want to use $fdp->fdp_if() instead.
+Most devices don't implement this, so you probably want to use $fdp->fdp_if()
+instead.
 
 See fdp_if() entry.
 
-(B<fdpCacheIfIndex>)
+(C<fdpCacheIfIndex>)
 
 =item  $fdp->fdp_ip()
 
 Returns remote IP address
 
-(B<fdpCacheAddress>)
+(C<fdpCacheAddress>)
 
 =item $fdp->fdp_platform() 
 
 Returns remote platform id 
 
-(B<fdpCachePlatform>)
+(C<fdpCachePlatform>)
 
 =item $fdp->fdp_port()
 
 Returns remote port ID
 
-(B<fdpDevicePort>)
+(C<fdpDevicePort>)
 
 =item  $fdp->fdp_proto()
 
 Returns remote address type received.  Usually IP.
 
-(B<fdpCacheAddressType>)
+(C<fdpCacheAddressType>)
 
 =item $fdp->fdp_ver() 
 
 Returns remote hardware version
 
-(B<fdpCacheVersion>)
+(C<fdpCacheVersion>)
 
 =item $fdp->fdp_vlan()
 
 Returns the remote interface native VLAN.
 
-(B<fdpCacheNativeVLAN>)
+(C<fdpCacheNativeVLAN>)
 
 =back
 

Info/IEEE802dot11.pm

@@ -0,0 +1,407 @@
+# SNMP::Info::IEEE802dot11
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::IEEE802dot11;
+
+use strict;
+use Exporter;
+
+@SNMP::Info::IEEE802dot11::ISA       = qw/Exporter/;
+@SNMP::Info::IEEE802dot11::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( 'IEEE802dot11-MIB' => 'dot11DesiredSSID', );
+
+%GLOBALS = ();
+
+%FUNCS = (
+
+    # dot11PhyOFDMTable
+    'dot11_cur_freq' => 'dot11CurrentFrequency',
+
+    # dot11PhyDSSSTable
+    'dot11_cur_ch' => 'dot11CurrentChannel',
+
+    # dot11PhyOperationTable
+    'dot11_phy_type' => 'dot11PHYType',
+    'dot11_reg_dom'  => 'dot11CurrentRegDomain',
+
+    # dot11ResourceInfoTable
+    'dot11_prod_ver'  => 'dot11manufacturerProductVersion',
+    'dot11_prod_name' => 'dot11manufacturerProductName',
+    'dot11_man_name'  => 'dot11manufacturerName',
+
+    # dot11OperationTable
+    'dot11_mac' => 'dot11MACAddress',
+
+    # dot11StationConfigTable
+    'dot11_bss_type' => 'dot11DesiredBSSType',
+    'i_ssidlist'     => 'dot11DesiredSSID',
+    'dot11_pwr_mode' => 'dot11PowerManagementMode',
+    'dot11_sta_id'   => 'dot11StationID',
+
+    # dot11PhyTxPowerTable
+    'dot11_cur_tx_pwr'     => 'dot11CurrentTxPowerLevel',
+    'dot11_tx_pwr_level_1' => 'dot11TxPowerLevel1',
+    'dot11_tx_pwr_level_2' => 'dot11TxPowerLevel2',
+    'dot11_tx_pwr_level_3' => 'dot11TxPowerLevel3',
+    'dot11_tx_pwr_level_4' => 'dot11TxPowerLevel4',
+    'dot11_tx_pwr_level_5' => 'dot11TxPowerLevel5',
+    'dot11_tx_pwr_level_6' => 'dot11TxPowerLevel6',
+    'dot11_tx_pwr_level_7' => 'dot11TxPowerLevel7',
+    'dot11_tx_pwr_level_8' => 'dot11TxPowerLevel8',
+);
+
+%MUNGE = (
+    'dot11_mac'    => \&SNMP::Info::munge_mac,
+    'dot11_sta_id' => \&SNMP::Info::munge_mac,
+);
+
+sub vendor {
+    my $dot11 = shift;
+
+    my $names = $dot11->dot11_man_name();
+
+    foreach my $iid ( keys %$names ) {
+        my $vendor = $names->{$iid};
+        next unless defined $vendor;
+        if ( $vendor =~ /^(\S+)/ ) {
+            return lc($1);
+        }
+    }
+
+    return;
+}
+
+sub model {
+    my $dot11 = shift;
+
+    my $names = $dot11->dot11_prod_name();
+
+    foreach my $iid ( keys %$names ) {
+        my $prod = $names->{$iid};
+        next unless defined $prod;
+        return lc($prod);
+    }
+    return;
+}
+
+sub os_ver {
+    my $dot11 = shift;
+
+    my $versions = $dot11->dot11_prod_ver();
+
+    foreach my $iid ( keys %$versions ) {
+        my $ver = $versions->{$iid};
+        next unless defined $ver;
+        if ( $ver =~ /([\d\.]+)/ ) {
+            return $1;
+        }
+    }
+
+    return;
+}
+
+sub i_80211channel {
+    my $dot11 = shift;
+
+    my $phy_type = $dot11->dot11_phy_type() || {};
+    my $cur_freq = $dot11->dot11_cur_freq() || {};
+    my $cur_ch   = $dot11->dot11_cur_ch()   || {};
+
+    my %i_80211channel;
+    foreach my $iid ( keys %$phy_type ) {
+        my $type = $phy_type->{$iid};
+        next unless defined $type;
+        if ( $type =~ /dsss/ ) {
+            my $ch = $cur_ch->{$iid};
+            next unless defined $ch;
+            $i_80211channel{$iid} = $ch;
+        }
+        elsif ( $type =~ /ofdm/ ) {
+            my $ch = $cur_freq->{$iid};
+            next unless defined $ch;
+            $i_80211channel{$iid} = $ch;
+        }
+        else {
+            next;
+        }
+    }
+
+    return \%i_80211channel;
+}
+
+sub dot11_cur_tx_pwr_mw {
+    my $dot11               = shift;
+    my $partial             = shift;
+    my $cur                 = $dot11->dot11_cur_tx_pwr($partial);
+    my $dot11_cur_tx_pwr_mw = {};
+    foreach my $idx ( keys %$cur ) {
+        my $pwr = $cur->{$idx};
+        if ( $pwr >= 1 && $pwr <= 8 ) {
+
+            # ToDo - Look at string eval
+            my $mw
+                = eval "\$dot11->dot11_tx_pwr_level_$pwr(\$idx)"; ## no critic
+            $dot11_cur_tx_pwr_mw->{$idx} = $mw->{$idx};
+        }
+        else {
+            next;
+        }
+    }
+    return $dot11_cur_tx_pwr_mw;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::IEEE802dot11 - SNMP Interface to data from F<IEEE802dot11-MIB>
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+    my $dot11 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $dot11->class();
+    print " Using device sub class : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::IEEE802dot11 is a subclass of SNMP::Info that provides an
+interface to F<IEEE802dot11-MIB>.  This MIB is used in standards based
+802.11 wireless devices.
+
+Use or create a subclass of SNMP::Info that inherits this one.
+Do not use directly.
+
+=head2 Inherited Classes
+
+=over
+
+None.
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<IEEE802dot11-MIB>
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $dot11->vendor()
+
+Tries to discover the vendor from dot11_man_name() - returns lower case
+of the first word in the first instance found.
+
+=item $dot11->model()
+
+Tries to discover the model from dot11_prod_name() - returns lower case
+of the first instance found.
+
+=item $dot11->os_ver()
+
+Tries to discover the operating system version from dot11_prod_ver() - returns
+string of numeric and decimals in the first instance found.
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $dot11->i_ssidlist()
+
+Returns reference to hash.  SSID's recognized by the radio interface.
+
+(C<dot11DesiredSSID>)
+
+=item $dot11->i_80211channel()
+
+Returns reference to hash.  Current operating frequency channel of the radio
+interface.
+
+=item $dot11->dot11_cur_tx_pwr_mw()
+
+Returns reference to hash.  Current transmit power, in milliwatts, of the
+radio interface.
+
+=back
+
+=head2 Dot11 Phy OFDM Table  (C<dot11PhyOFDMTable>)
+
+=over
+
+=item $dot11->dot11_cur_freq()
+
+(C<dot11CurrentFrequency>)
+
+=back
+
+=head2 Dot11 Phy DSSS Table  (C<dot11PhyDSSSTable>)
+
+=over
+
+=item $dot11->dot11_cur_ch()
+
+(C<dot11CurrentChannel>)
+
+=back
+
+=head2 Dot11 Phy Operation Table  (C<dot11PhyOperationTable>)
+
+=over
+
+=item $dot11->dot11_phy_type()
+
+(C<dot11PHYType>)
+
+=item $dot11->dot11_reg_dom()
+
+(C<dot11CurrentRegDomain>)
+
+=back
+
+=head2 Dot11 Resource Information Table  (C<dot11ResourceInfoTable>)
+
+=over
+
+=item $dot11->dot11_prod_ver()
+
+(C<dot11manufacturerProductVersion>)
+
+=item $dot11->dot11_prod_name()
+
+(C<dot11manufacturerProductName>)
+
+=item $dot11->dot11_man_name()
+
+(C<dot11manufacturerName>)
+
+=back
+
+=head2 Dot11 Operation Table  (C<dot11OperationTable>)
+
+=over
+
+=item $dot11->dot11_mac()
+
+(C<dot11MACAddress>)
+
+=back
+
+=head2 Dot11 Station Configuration Table  (C<dot11StationConfigTable>)
+
+=over
+
+=item $dot11->dot11_bss_type()
+
+(C<dot11DesiredBSSType>)
+
+=item $dot11->dot11_pwr_mode()
+
+(C<dot11PowerManagementMode>)
+
+=item $dot11->dot11_sta_id()
+
+(C<dot11StationID>)
+
+=back
+
+=head2 Dot11 Transmission Power Table  (C<dot11PhyTxPowerTable>)
+
+=over
+
+=item $dot11->dot11_cur_tx_pwr()
+
+(C<dot11CurrentTxPowerLevel>)
+
+=item $dot11->dot11_tx_pwr_level_1()
+
+(C<dot11TxPowerLevel1>)
+
+=item $dot11->dot11_tx_pwr_level_2()
+
+(C<dot11TxPowerLevel2>)
+
+=item $dot11->dot11_tx_pwr_level_3()
+
+(C<dot11TxPowerLevel3>)
+
+=item $dot11->dot11_tx_pwr_level_4()
+
+(C<dot11TxPowerLevel4>)
+
+=item $dot11->dot11_tx_pwr_level_5()
+
+(C<dot11TxPowerLevel5>)
+
+=item $dot11->dot11_tx_pwr_level_6()
+
+(C<dot11TxPowerLevel6>)
+
+=item $dot11->dot11_tx_pwr_level_7()
+
+(C<dot11TxPowerLevel7>)
+
+=item $dot11->dot11_tx_pwr_level_8()
+
+(C<dot11TxPowerLevel8>)
+
+=back
+
+=cut

Info/IPv6.pm

@@ -0,0 +1,485 @@
+# SNMP::Info::IPv6
+#
+# Copyright (c) 2010 Jeroen van Ingen and Carlos Vicente
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::IPv6;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::IPv6::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::IPv6::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE $METHOD/;
+
+use constant {
+    IPMIB   => 1,
+    CISCO   => 2,
+    IPV6MIB => 3,
+};
+
+$VERSION = '3.03';
+
+
+
+%MIBS = ( 
+    'IP-MIB'            => 'ipv6InterfaceTableLastChange',
+    'IPV6-MIB'          => 'ipv6IfTableLastChange',
+    'CISCO-IETF-IP-MIB' => 'cInetNetToMediaNetAddress', 
+);
+
+%GLOBALS = ();
+
+%FUNCS = ( 
+    'ip_n2p_phys_addr'  => 'ipNetToPhysicalPhysAddress',    # IP-MIB
+    'c_inet_phys_addr'  => 'cInetNetToMediaPhysAddress',    # CISCO-IETF-IP-MIB
+    'i6_n2p_phys_addr'  => 'ipv6NetToMediaPhysAddress',     # IPV6-MIB
+
+    'ip_n2p_phys_type'  => 'ipNetToPhysicalType',           # IP-MIB
+    'c_inet_phys_type'  => 'cInetNetToMediaType',           # CISCO-IETF-IP-MIB
+    'i6_n2p_phys_type'  => 'ipv6NetToMediaType',            # IPV6-MIB
+
+    'ip_n2p_phys_state' => 'ipNetToPhysicalState',          # IP-MIB
+    'c_inet_phys_state' => 'cInetNetToMediaState',          # CISCO-IETF-IP-MIB
+    'i6_n2p_phys_state' => 'ipv6NetToMediaState',           # IPV6-MIB
+
+    'ip_pfx_origin'     => 'ipAddressPrefixOrigin',         # IP-MIB
+    'c_pfx_origin'      => 'cIpAddressPfxOrigin',           # CISCO-IETF-IP-MIB 
+
+    'ip_addr6_pfx'      => 'ipAddressPrefix',              # IP-MIB 
+    'c_addr6_pfx'       => 'cIpAddressPrefix',              # CISCO-IETF-IP-MIB 
+
+    'ip_addr6_index'    => 'ipAddressIfIndex',              # IP-MIBw
+    'c_addr6_index'     => 'cIpAddressIfIndex',             # CISCO-IETF-IP-MIB 
+
+    'ip_addr6_type'     => 'ipAddressType',                 # IP-MIB
+    'c_addr6_type'      => 'cIpAddressType',                # CISCO-IETF-IP-MIB
+    
+);
+
+%MUNGE = (
+    'ip_n2p_phys_addr'  => \&SNMP::Info::munge_mac,
+    'c_inet_phys_addr'  => \&munge_physaddr,
+    'i6_n2p_phys_addr'  => \&SNMP::Info::munge_mac,
+);
+
+
+sub ipv6_n2p_mac {
+    my $info = shift;
+    my $return;
+    my $phys_addr = &_test_methods( $info, {
+        ip_n2p_phys_addr => IPMIB,
+        c_inet_phys_addr => CISCO,
+        i6_n2p_phys_addr => IPV6MIB,
+    });
+    return unless defined $phys_addr;
+    foreach my $row (keys %$phys_addr) {
+        if ($row =~ /^(\d+)\.(\d+)\.(\d+)\.([\d\.]+)$/) {
+            my $ifindex = $1; my $addrtype = $2; my $addrsize = $3; my $v6addr = $4;
+            if ($info::METHOD == IPV6MIB) { 
+                # IPV6-MIB doesn't include the addrtype in the index; 
+                # also, address syntax is IPv6Address (fixed 16 bytes) and not InetAddress (length field followed by address bytes)
+                $v6addr = join('.', $addrtype, $addrsize, $v6addr);
+                $addrtype = 2;
+            }
+            if (($addrtype == 2) && (defined $phys_addr->{$row})) { # IPv6
+                $return->{$row} = substr($phys_addr->{$row}, 0, 17);
+            }
+        }
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_n2p_addr {
+    my $info = shift;
+    my $return;
+    my $net_addr = &_test_methods( $info, {
+        ip_n2p_phys_addr => IPMIB,
+        c_inet_phys_addr => CISCO,
+        i6_n2p_phys_addr => IPV6MIB,
+    });
+    return unless defined $net_addr;
+    foreach my $row (keys %$net_addr) {
+        if ($row =~ /^(\d+)\.(\d+)\.(\d+)\.([\d\.]+)$/) {
+            my $ifindex = $1; my $addrtype = $2; my $addrsize = $3; my $v6addr = $4;
+            if ($info::METHOD == IPV6MIB) { 
+                # IPV6-MIB doesn't include the addrtype in the index; 
+                # also, address syntax is IPv6Address (fixed 16 bytes) and not InetAddress (length field followed by address bytes)
+                $v6addr = join('.', $addrtype, $addrsize, $v6addr);
+                $addrtype = 2;
+            }
+            if ($addrtype == 2) { # IPv6
+                my $v6_packed = pack("C*", split(/\./, $v6addr));
+                if (length($v6_packed) == 15) {
+                    # Workaround for some some IP-MIB implementations, eg on Cisco Nexus: no explicit addrsize, 
+                    # so what we've collected in that variable is actually the first byte of the address.
+                    $v6_packed = pack('C', $addrsize) . $v6_packed;
+                }
+                if (length($v6_packed) == 16) {
+                    $v6addr = join(':', map { sprintf("%04x", $_) } unpack("n*", $v6_packed) );
+                    $return->{$row} = $v6addr;
+                } else {
+                    printf("Invalid size for IPv6 address: expected 16 bytes, got %d (%s = %s)\n", length($v6_packed), $row, $net_addr->{$row});
+                }
+            }
+        }
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_n2p_if {
+    my $info = shift;
+    my $return;
+    my $phys_addr = &_test_methods( $info, {
+        ip_n2p_phys_addr => IPMIB,
+        c_inet_phys_addr => CISCO,
+        i6_n2p_phys_addr => IPV6MIB,
+    });
+    return unless defined $phys_addr;
+    foreach my $row (keys %$phys_addr) {
+        if ($row =~ /^(\d+)\.(\d+)\.(\d+)\.([\d\.]+)$/) {
+            my $ifindex = $1; my $addrtype = $2; my $addrsize = $3; my $v6addr = $4;
+            if ($info::METHOD == IPV6MIB) { 
+                # IPV6-MIB doesn't include the addrtype in the index; 
+                # also, address syntax is IPv6Address (fixed 16 bytes) and not InetAddress (length field followed by address bytes)
+                $v6addr = join('.', $addrtype, $addrsize, $v6addr);
+                $addrtype = 2;
+            }
+            if ($addrtype == 2) { # IPv6
+                $return->{$row} = $ifindex;
+            }
+        }
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_n2p_type {
+    my $info = shift;
+    my $return;
+    my $phys_type = &_test_methods( $info, {
+        ip_n2p_phys_type => IPMIB,
+        c_inet_phys_type => CISCO,
+        i6_n2p_phys_type => IPV6MIB,
+    });
+    return unless defined $phys_type;
+    foreach my $row (keys %$phys_type) {
+        if ($row =~ /^(\d+)\.(\d+)\.(\d+)\.([\d\.]+)$/) {
+            my $ifindex = $1; my $addrtype = $2; my $addrsize = $3; my $v6addr = $4;
+            if ($info::METHOD == IPV6MIB) { 
+                # IPV6-MIB doesn't include the addrtype in the index; 
+                # also, address syntax is IPv6Address (fixed 16 bytes) and not InetAddress (length field followed by address bytes)
+                $v6addr = join('.', $addrtype, $addrsize, $v6addr);
+                $addrtype = 2;
+            }
+            if ($addrtype == 2) { # IPv6
+                $return->{$row} = $phys_type->{$row};
+            }
+        }
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_n2p_state {
+    my $info = shift;
+    my $return;
+    my $phys_state = &_test_methods( $info, {
+        ip_n2p_phys_state => IPMIB,
+        c_inet_phys_state => CISCO,
+        i6_n2p_phys_state => IPV6MIB,
+    });
+    return unless defined $phys_state;
+    foreach my $row (keys %$phys_state) {
+        if ($row =~ /^(\d+)\.(\d+)\.(\d+)\.([\d\.]+)$/) {
+            my $ifindex = $1; my $addrtype = $2; my $addrsize = $3; my $v6addr = $4;
+            if ($info::METHOD == IPV6MIB) { 
+                # IPV6-MIB doesn't include the addrtype in the index; 
+                # also, address syntax is IPv6Address (fixed 16 bytes) and not InetAddress (length field followed by address bytes)
+                $v6addr = join('.', $addrtype, $addrsize, $v6addr);
+                $addrtype = 2;
+            }
+            if ($addrtype == 2) { # IPv6
+                $return->{$row} = $phys_state->{$row};
+            }
+        }
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_index {
+    my $info = shift;
+    my $return;
+    my $ipv6_index = &_test_methods( $info, {
+	ip_addr6_index  => IPMIB,
+	c_addr6_index   => CISCO,
+				    });
+    return unless defined $ipv6_index;
+    foreach my $row (keys %$ipv6_index){
+        if ($row =~ /^(\d+)\.([\d\.]+)$/) {
+            my $addrtype = $1; my $v6addr = $2;
+            if ($addrtype == 2) { # IPv6
+		$return->{$row} = $ipv6_index->{$row};
+	    }
+	}
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_type {
+    my $info = shift;
+    my $return;
+    my $ipv6_type = &_test_methods( $info, {
+	ip_addr6_type  => IPMIB,
+	c_addr6_type   => CISCO,
+				    });
+    return unless defined $ipv6_type;
+    foreach my $row (keys %$ipv6_type){
+        if ($row =~ /^(\d+)\.([\d\.]+)$/) {
+            my $addrtype = $1; my $v6addr = $2;
+            if ($addrtype == 2) { # IPv6
+		$return->{$row} = $ipv6_type->{$row};
+	    }
+	}
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_pfx_origin {
+    my $info = shift;
+    my $return;
+    my $ipv6_pfx_origin = &_test_methods( $info, {
+	ip_pfx_origin  => IPMIB,
+	c_pfx_origin   => CISCO,
+				    });
+    return unless defined $ipv6_pfx_origin;
+    foreach my $row (keys %$ipv6_pfx_origin){
+        if ($row =~ /^(\d+)\.(\d+)\.([\d\.]+)\.(\d+)$/) {
+            my $ifindex = $1; my $type = $2; my $pfx = $3; my $len = $4;
+            if ($type == 2) { # IPv6
+		$return->{$row} = $ipv6_pfx_origin->{$row};
+	    }
+	}
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub ipv6_addr_prefix {
+    my $info = shift;
+    my $return;
+    my $ipv6_addr_prefix = &_test_methods( $info, {
+	ip_addr6_pfx  => IPMIB,
+	c_addr6_pfx   => CISCO,
+				    });
+    return unless defined $ipv6_addr_prefix;
+    foreach my $row (keys %$ipv6_addr_prefix){
+        if ($row =~ /^(\d+)\.[\d\.]+$/) {
+            my $type = $1;
+            if ($type == 2) { # IPv6
+		# Remove the OID part from the value
+		my $val = $ipv6_addr_prefix->{$row};
+		if ( $val =~ /^.+?((?:\d+\.){19}\d+)$/ ){
+		    $val = $1;
+		    $return->{$row} = $val;
+		}
+	    }
+	}
+    }
+    printf("%s: data comes from %s.\n", &_my_sub_name, $info->_method_used() ) if $info->debug();
+    return $return;
+}
+
+sub _method_used {
+    my $info = shift;
+    my $return = 'none of the MIBs';
+    if (defined $info::METHOD) {
+        if ($info::METHOD eq IPMIB) {
+            $return = 'IP-MIB';
+        } elsif ($info::METHOD eq IPV6MIB) {
+            $return = 'IPV6-MIB';
+        } elsif ($info::METHOD eq CISCO) {
+            $return = 'CISCO-IETF-IP-MIB';
+        }
+    }
+    return $return;
+}
+
+sub _test_methods {
+    my $info = shift;
+    my $test = shift;
+    my $return = {};
+    foreach my $method (sort {$test->{$a} <=> $test->{$b}} keys %$test) {
+        $return = $info->$method || {};
+        if (scalar keys %$return) {
+            $info::METHOD = $test->{$method};
+            last;
+        }
+    }
+    return $return;
+}
+
+sub _my_sub_name {
+    my @callinfo = caller(1);
+    return $callinfo[3];
+}
+
+sub munge_physaddr {
+    my $addr = shift;
+    return unless defined $addr;
+    return unless length $addr;
+    $addr = join( ':', map { sprintf "%02x", $_ } unpack( 'C*', $addr ) );
+    return $addr;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::IPv6 - SNMP Interface for obtaining IPv6 addresses and IPv6
+address mappings
+
+=head1 AUTHOR
+
+Jeroen van Ingen and Carlos Vicente
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $info = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $info->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+The SNMP::Info::IPv6 class implements functions to for mapping IPv6 addresses 
+to MAC addresses, interfaces and more. It will use data from the F<IP-MIB>,
+F<IPV6-MIB>, or the F<CISCO-IETF-IP-MIB>, whichever is supported by the
+device.
+
+This class is inherited by Info::Layer3 to provide IPv6 node tracking across  
+device classes.
+
+For debugging purposes you can call this class directly as you would
+SNMP::Info
+
+ my $info = new SNMP::Info::IPv6 (...);
+
+=head2 Inherited Classes
+
+none.
+
+=head2 Required MIBs
+
+=over
+
+=item F<IP-MIB>
+=item F<IPV6-MIB>
+=item F<CISCO-IETF-IP-MIB>
+
+=back
+
+=head1 GLOBALS
+
+none.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2  Internet Address Table
+
+=over
+
+=item $info->ipv6_n2p_addr()
+
+=item $info->ipv6_n2p_if()
+
+=item $info->ipv6_n2p_mac()
+
+=item $info->ipv6_n2p_state()
+
+=item $info->ipv6_n2p_type()
+
+=item $info->ipv6_index()
+
+Maps an IPv6 address to an interface C<ifIndex>
+
+=item $info->ipv6_type()
+
+Maps an IPv6 address to its type (unicast, anycast, etc.)
+
+=item $info->ipv6_pfx_origin()
+
+Maps an IPv6 prefix with its origin (manual, well-known, dhcp, etc.)
+
+=item $info->ipv6_addr_prefix() 
+
+Maps IPv6 addresses with their prefixes
+
+=back
+
+=head2  Internet Address Translation Table
+
+=over
+
+=item $info->c_inet_phys_address()
+
+Maps an address of type C<cInetNetToMediaNetAddressType> on interface C<ifIndex> to a physical address.
+
+=back
+
+=head1 MUNGES
+
+=over 
+
+=item munge_physaddr()
+
+Takes an octet stream (HEX-STRING) and returns a colon separated ASCII hex
+string.
+
+=back
+
+=cut

Info/LLDP.pm

@@ -0,0 +1,533 @@
+# SNMP::Info::LLDP
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::LLDP;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::LLDP::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::LLDP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    'LLDP-MIB'          => 'lldpLocSysCapEnabled',
+    'LLDP-EXT-DOT1-MIB' => 'lldpXdot1MIB',
+    'LLDP-EXT-DOT3-MIB' => 'lldpXdot3MIB',
+);
+
+%GLOBALS = (
+    'lldp_sysname' => 'lldpLocSysName',
+    'lldp_sysdesc' => 'lldpLocSysDesc',
+    'lldp_sys_cap' => 'lldpLocSysCapEnabled',
+);
+
+%FUNCS = (
+
+    # LLDP-MIB::lldpLocManAddrTable
+    'lldp_lman_addr' => 'lldpLocManAddrIfId',
+
+    # LLDP-MIB::lldpRemTable
+    'lldp_rem_id_type'  => 'lldpRemChassisIdSubtype',
+    'lldp_rem_id'       => 'lldpRemChassisId',
+    'lldp_rem_pid_type' => 'lldpRemPortIdSubtype',
+    'lldp_rem_pid'      => 'lldpRemPortId',
+    'lldp_rem_desc'     => 'lldpRemPortDesc',
+    'lldp_rem_sysname'  => 'lldpRemSysName',
+    'lldp_rem_sysdesc'  => 'lldpRemSysDesc',
+    'lldp_rem_sys_cap'  => 'lldpRemSysCapEnabled',
+
+    # LLDP-MIB::lldpRemManAddrTable
+    'lldp_rman_addr' => 'lldpRemManAddrIfSubtype',
+);
+
+%MUNGE = (
+    'lldp_sysdesc'       => \&SNMP::Info::munge_null,
+    'lldp_sysname'       => \&SNMP::Info::munge_null,
+    'lldp_rem_sysname'   => \&SNMP::Info::munge_null,
+    'lldp_rem_sysdesc'   => \&SNMP::Info::munge_null,
+    'lldp_rem_port_desc' => \&SNMP::Info::munge_null,
+    'lldp_sys_cap'       => \&SNMP::Info::munge_bits,
+    'lldp_rem_sys_cap'   => \&SNMP::Info::munge_bits,
+);
+
+sub hasLLDP {
+    my $lldp = shift;
+
+    # We may be have LLDP, but nothing in lldpRemoteSystemsData Tables
+    # so we could be running LLDP but not return any useful information
+    my $lldp_cap = $lldp->lldp_sys_cap();
+
+    return 1 if defined $lldp_cap;
+    return;
+}
+
+sub lldp_if {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $addr    = $lldp->lldp_rem_pid($partial) || {};
+    my $i_descr = $lldp->i_description() || {};
+    my $i_alias = $lldp->i_alias() || {};
+    my %r_i_descr = reverse %$i_descr;
+    my %r_i_alias = reverse %$i_alias;
+    
+    my %lldp_if;
+    foreach my $key ( keys %$addr ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        next unless $port;
+        # Local LLDP port may not equate to ifIndex, see LldpPortNumber TEXTUAL-CONVENTION in LLDP-MIB.
+        # Cross reference lldpLocPortDesc with ifDescr and ifAlias to get ifIndex,
+        # prefer ifDescr over ifAlias because using cross ref with description is correct behavior 
+        # according to the LLDP-MIB. Some devices (eg H3C gear) seem to use ifAlias though.
+        my $lldp_desc = $lldp->lldpLocPortDesc($port);
+        my $desc = $lldp_desc->{$port};
+        # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
+        if ( exists $r_i_descr{$desc} ) {
+            $port = $r_i_descr{$desc};
+        } elsif ( exists $r_i_alias{$desc} ) {
+            $port = $r_i_alias{$desc};
+        }
+        
+        $lldp_if{$key} = $port;
+    }
+    return \%lldp_if;
+}
+
+sub lldp_ip {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $rman_addr = $lldp->lldp_rman_addr($partial) || {};
+
+    my %lldp_ip;
+    foreach my $key ( keys %$rman_addr ) {
+        my ( $index, $proto, $addr ) = _lldp_addr_index($key);
+        next unless defined $index;
+        next unless $proto == 1;
+        $lldp_ip{$index} = $addr;
+    }
+    return \%lldp_ip;
+}
+
+sub lldp_addr {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $rman_addr = $lldp->lldp_rman_addr($partial) || {};
+
+    my %lldp_ip;
+    foreach my $key ( keys %$rman_addr ) {
+        my ( $index, $proto, $addr ) = _lldp_addr_index($key);
+        next unless defined $index;
+        $lldp_ip{$index} = $addr;
+    }
+    return \%lldp_ip;
+}
+
+sub lldp_port {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $pdesc = $lldp->lldp_rem_desc($partial)     || {};
+    my $pid   = $lldp->lldp_rem_pid($partial)      || {};
+    my $ptype = $lldp->lldp_rem_pid_type($partial) || {};
+
+    my %lldp_port;
+    foreach my $key ( sort keys %$pid ) {
+        my $port = $pdesc->{$key};
+        unless ($port) {
+            $port = $pid->{$key};
+            next unless $port;
+            my $type = $ptype->{$key};
+            next unless $type;
+
+          # May need to format other types in the future, i.e. Network address
+            if ( $type =~ /mac/ ) {
+                $port = join( ':',
+                    map { sprintf "%02x", $_ } unpack( 'C*', $port ) );
+            }
+        }
+
+        # Avaya/Nortel lldpRemPortDesc doesn't match ifDescr, but we can still
+        # figure out slot.port based upon lldpRemPortDesc
+        if ( $port =~ /^(Unit\s+(\d+)\s+)?Port\s+(\d+)$/ ) {
+            $port = defined $1 ? "$2.$3" : "$3";
+        }
+
+        $lldp_port{$key} = $port;
+    }
+    return \%lldp_port;
+}
+
+sub lldp_id {
+    my $lldp    = shift;
+    my $partial = shift;
+
+    my $ch_type = $lldp->lldp_rem_id_type($partial) || {};
+    my $ch      = $lldp->lldp_rem_id($partial)      || {};
+
+    my %lldp_id;
+    foreach my $key ( keys %$ch ) {
+        my $id = $ch->{$key};
+        next unless $id;
+        my $type = $ch_type->{$key};
+        next unless $type;
+
+        # May need to format other types in the future
+        if ( $type =~ /mac/ ) {
+            $id = join( ':', map { sprintf "%02x", $_ } unpack( 'C*', $id ) );
+        }
+        elsif ($type eq 'networkAddress') {
+            if ( length(unpack('H*', $id)) == 10 ) {
+                # IP address (first octet is sign, I guess)
+                my @octets = (map { sprintf "%02x",$_ } unpack('C*', $id))[1..4];
+                $id = join '.', map { hex($_) } @octets;
+            }
+        }
+        $lldp_id{$key} = $id;
+    }
+    return \%lldp_id;
+}
+
+#sub root_ip {
+#    my $lldp = shift;
+#
+#    my $man_addr = $lldp->lldp_lman_addr() || {};
+#
+#    foreach my $key (keys %$man_addr) {
+#        my @oids   = split(/\./, $key);
+#        my $proto  = shift(@oids);
+#        my $length = shift(@oids);
+#        # IPv4
+#        if ($proto == 1) {
+#            my $addr = join('.',@oids);
+#            return $addr if (defined $addr and $lldp->snmp_connect_ip($addr));
+#        }
+#    }
+#    return;
+#}
+
+# Break up the lldpRemManAddrTable INDEX into common index, protocol,
+# and address.
+sub _lldp_addr_index {
+    my $idx    = shift;
+    my @oids   = split( /\./, $idx );
+    my $index  = join( '.', splice( @oids, 0, 3 ) );
+    my $proto  = shift(@oids);
+    my $length = shift(@oids);
+
+    # IPv4
+    if ( $proto == 1 ) {
+        return ( $index, $proto, join( '.', @oids ) );
+    }
+
+    # MAC
+    elsif ( $proto == 6 ) {
+        return ( $index, $proto,
+            join( ':', map { sprintf "%02x", $_ } @oids ) );
+    }
+
+    # TODO - Need to handle other protocols, i.e. IPv6
+    else {
+        return;
+    }
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::LLDP - SNMP Interface to the Link Layer Discovery Protocol (LLDP)
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ my $lldp = new SNMP::Info ( 
+                             AutoSpecify => 1,
+                             Debug       => 1,
+                             DestHost    => 'router', 
+                             Community   => 'public',
+                             Version     => 2
+                           );
+
+ my $class = $lldp->class();
+ print " Using device sub class : $class\n";
+
+ $haslldp   = $lldp->hasLLDP() ? 'yes' : 'no';
+
+ # Print out a map of device ports with LLDP neighbors:
+ my $interfaces    = $lldp->interfaces();
+ my $lldp_if       = $lldp->lldp_if();
+ my $lldp_ip       = $lldp->lldp_ip();
+ my $lldp_port     = $lldp->lldp_port();
+
+ foreach my $lldp_key (keys %$lldp_ip){
+    my $iid           = $lldp_if->{$lldp_key};
+    my $port          = $interfaces->{$iid};
+    my $neighbor      = $lldp_ip->{$lldp_key};
+    my $neighbor_port = $lldp_port->{$lldp_key};
+    print "Port : $port connected to $neighbor / $neighbor_port\n";
+ }
+
+=head1 DESCRIPTION
+
+SNMP::Info::LLDP is a subclass of SNMP::Info that provides an object oriented 
+interface to LLDP information through SNMP.
+
+LLDP is a Layer 2 protocol that allows a network device to advertise its
+identity and capabilities on the local network providing topology information.
+The protocol is defined in the IEEE standard 802.1AB.
+
+Create or use a device subclass that inherits this class.  Do not use
+directly.
+
+=head2 Inherited Classes
+
+None.
+
+=head2 Required MIBs
+
+=over
+
+=item F<LLDP-MIB>
+
+=item F<LLDP-EXT-DOT1-MIB>
+
+=item F<LLDP-EXT-DOT3-MIB>
+
+=back
+
+=head1 GLOBAL METHODS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $lldp->hasLLDP()
+
+Is LLDP is active in this device?  
+
+Note:  LLDP may be active, but nothing in C<lldpRemoteSystemsData> Tables so
+the device would not return any useful topology information.
+
+=item $lldp->lldp_sysname()
+
+The string value used to identify the system name of the local system.  If the
+local agent supports IETF RFC 3418, C<lldpLocSysName> object should have the
+same value of C<sysName> object.
+
+Nulls are removed before the value is returned. 
+
+(C<lldpLocSysName>)
+
+=item $lldp->lldp_sysdesc()
+
+The string value used to identify the system description of the local system.
+If the local agent supports IETF RFC 3418, C<lldpLocSysDesc> object should
+have the same value of C<sysDesc> object.
+
+Nulls are removed before the value is returned.
+
+(C<lldpLocSysDesc>)
+
+=item  $lldp->lldp_sys_cap() 
+
+Returns which system capabilities are enabled on the local system.  Results
+are munged into an ascii binary string, LSB.  Each digit represents a bit
+from the table below:
+
+=over
+
+=item Bit 'other(0)' indicates that the system has capabilities other than
+those listed below.
+
+=item Bit 'repeater(1)' indicates that the system has repeater capability.
+
+=item Bit 'bridge(2)' indicates that the system has bridge capability.
+
+=item Bit 'wlanAccessPoint(3)' indicates that the system has WLAN access
+point capability.
+
+=item Bit 'router(4)' indicates that the system has router capability.
+
+=item Bit 'telephone(5)' indicates that the system has telephone capability.
+
+=item Bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable
+Device capability (IETF RFC 2669 & 2670).
+
+=item Bit 'stationOnly(7)' indicates that the system has only station
+capability and nothing else."
+
+=back
+
+(C<lldpLocSysCapEnabled>)
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $lldp->lldp_id()
+
+Returns the string value used to identify the chassis component associated
+with the remote system.
+
+(C<lldpRemChassisId>)
+
+=item $lldp->lldp_if()
+
+Returns the mapping to the SNMP Interface Table. Tries to cross reference 
+(C<lldpLocPortDesc>) with (C<ifDescr>) and (C<ifAlias>) to get (C<ifIndex>), 
+if unable defaults to (C<lldpRemLocalPortNum>).
+
+=item  $lldp->lldp_ip()
+
+Returns remote IPv4 address.  Returns for all other address types, use
+lldp_addr if you want any return address type.
+
+=item  $lldp->lldp_addr()
+
+Returns remote address.  Type may be any IANA Address Family Number.
+Currently only returns IPv4 or MAC addresses.
+
+=item $lldp->lldp_port()
+
+Returns remote port ID
+
+=back
+
+=head2 LLDP Remote Table (C<lldpRemTable>)
+
+=over
+
+=item $lldp->lldp_rem_id_type()
+
+Returns the type of encoding used to identify the chassis associated with
+the remote system.
+
+(C<lldpRemChassisIdSubtype>)
+
+=item $lldp->lldp_rem_id()
+
+Returns the string value used to identify the chassis component    associated
+with the remote system.
+
+(C<lldpRemChassisId>)
+
+=item $lldp->lldp_rem_pid_type()
+
+Returns the type of port identifier encoding used in the associated
+C<lldpRemPortId> object.
+
+(C<lldpRemPortIdSubtype>)
+
+=item $lldp->lldp_rem_pid()
+
+Returns the string value used to identify the port component associated with
+the remote system.
+
+(C<lldpRemPortId>)
+
+=item $lldp->lldp_rem_desc()
+
+Returns the string value used to identify the description of the given port
+associated with the remote system.
+
+Nulls are removed before the value is returned. 
+
+(C<lldpRemPortDesc>)
+
+=item $lldp->lldp_rem_sysname()
+
+Returns the string value used to identify the system name of the remote
+system.
+
+Nulls are removed before the value is returned. 
+
+(C<lldpRemSysName>)
+
+=item $lldp->lldp_rem_sysdesc()
+
+Returns the string value used to identify the system description of the
+remote system.
+
+Nulls are removed before the value is returned. 
+
+(C<lldpRemSysDesc>)
+
+=item  $lldp->lldp_rem_sys_cap() 
+
+Returns which system capabilities are enabled on the local system.  Results
+are munged into an ascii binary string, LSB.  Each digit
+represents a bit from the table below:
+
+=over
+
+=item Bit 'other(0)' indicates that the system has capabilities other than
+those listed below.
+
+=item Bit 'repeater(1)' indicates that the system has repeater capability.
+
+=item Bit 'bridge(2)' indicates that the system has bridge capability.
+
+=item Bit 'wlanAccessPoint(3)' indicates that the system has WLAN access
+point capability.
+
+=item Bit 'router(4)' indicates that the system has router capability.
+
+=item Bit 'telephone(5)' indicates that the system has telephone capability.
+
+=item Bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable
+Device capability (IETF RFC 2669 & 2670).
+
+=item Bit 'stationOnly(7)' indicates that the system has only station
+capability and nothing else."
+
+=back
+
+(C<lldpRemSysCapEnabled>)
+
+=back
+
+=cut

Info/Layer1.pm

@@ -1,81 +1,73 @@
-# SNMP::Info::Layer1 - SNMP Interface to Layer1 Devices 
-# Max Baker <max@warped.org>
+# SNMP::Info::Layer1 - SNMP Interface to Layer1 Devices
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE $INIT/;
-
-@SNMP::Info::Layer1::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::Layer1::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::Layer1::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
 
-%MIBS = ( %SNMP::Info::MIBS, 
-          'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex'
-        );
+%MIBS = ( %SNMP::Info::MIBS, 'SNMP-REPEATER-MIB' => 'rptrPortGroupIndex' );
 
 %GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            'ports_managed'  => 'ifNumber',
-            'rptr_slots'     => 'rptrGroupCapacity',
-            'slots'          => 'rptrGroupCapacity'
-            );
+    %SNMP::Info::GLOBALS,
+    'ports_managed' => 'ifNumber',
+    'rptr_slots'    => 'rptrGroupCapacity',
+    'slots'         => 'rptrGroupCapacity'
+);
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            'i_up2'         => 'ifOperStatus',
-            'i_up_admin2'   => 'ifAdminStatus',
-            'rptr_ports'    => 'rptrGroupPortCapacity',
-            'rptr_port'     => 'rptrPortIndex',
-            'rptr_slot'     => 'rptrPortGroupIndex',
-            'rptr_up_admin' => 'rptrPortAdminStatus',
-            'rptr_up'       => 'rptrPortOperStatus',
-           );
+%FUNCS = (
+    %SNMP::Info::FUNCS,
+    'rptr_ports'    => 'rptrGroupPortCapacity',
+    'rptr_port'     => 'rptrPortIndex',
+    'rptr_slot'     => 'rptrPortGroupIndex',
+    'rptr_up_admin' => 'rptrPortAdminStatus',
+    'rptr_up'       => 'rptrPortOperStatus',
+    'rptr_last_src' => 'rptrAddrTrackNewLastSrcAddress',
+);
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::MUNGE,
-         );
+
+    # Inherit all the built in munging
+    %SNMP::Info::MUNGE,
+    'rptr_last_src' => \&SNMP::Info::munge_mac,
+);
 
 # Method OverRides
 
@@ -83,23 +75,23 @@ $INIT = 0;
 sub ports {
     my $l1 = shift;
 
-    my $ports         = $l1->ports_managed();
-    my $rptr_ports    = $l1->rptr_ports();
+    my $ports      = $l1->ports_managed();
+    my $rptr_ports = $l1->rptr_ports();
 
-    foreach my $group (keys %$rptr_ports){
-        $ports += $rptr_ports->{$group}; 
+    foreach my $group ( keys %$rptr_ports ) {
+        $ports += $rptr_ports->{$group};
     }
 
     return $ports;
 }
 
 # $l1->model() - Looks at sysObjectID which gives the oid of the system
-#       name, contained in a propriatry MIB. 
+#       name, contained in a propriatry MIB.
 sub model {
-    my $l1 = shift;
-    my $id = $l1->id();
+    my $l1    = shift;
+    my $id    = $l1->id();
     my $model = &SNMP::translateObj($id);
-    
+
     # HP
     $model =~ s/^hpswitch//i;
 
@@ -110,66 +102,73 @@ sub model {
 }
 
 sub vendor {
-    my $l1 = shift;
+    my $l1    = shift;
     my $descr = $l1->description();
 
-    return 'hp' if ($descr =~ /hp/i);
-    return 'cisco' if ($descr =~ /(catalyst|cisco|ios)/i);
-    return 'allied' if ($descr =~ /allied/i);
-    return 'asante' if ($descr =~ /asante/i);
+    return 'hp'     if ( $descr =~ /hp/i );
+    return 'cisco'  if ( $descr =~ /(catalyst|cisco|ios)/i );
+    return 'allied' if ( $descr =~ /allied/i );
+    return 'asante' if ( $descr =~ /asante/i );
+
+    return 'unknown';
 
 }
 
 # By Default we'll use the description field
 sub interfaces {
-    my $l1 = shift;
-    my $interfaces = $l1->i_index();
-    my $rptr_port  = $l1->rptr_port();
+    my $l1      = shift;
+    my $partial = shift;
 
-    foreach my $port (keys %$rptr_port){
+    my $interfaces = $l1->i_index($partial)   || {};
+    my $rptr_port  = $l1->rptr_port($partial) || {};
+
+    foreach my $port ( keys %$rptr_port ) {
         $interfaces->{$port} = $port;
     }
     return $interfaces;
 }
 
 sub i_up_admin {
-    my $l1 = shift;
+    my $l1      = shift;
+    my $partial = shift;
 
-    my $i_up_admin = $l1->i_up_admin2();
-    my $rptr_up_admin = $l1->rptr_up_admin();
+    my $i_up_admin    = $l1->SUPER::i_up_admin($partial) || {};
+    my $rptr_up_admin = $l1->rptr_up_admin($partial)     || {};
 
-    foreach my $key (keys %$rptr_up_admin){
+    foreach my $key ( keys %$rptr_up_admin ) {
         my $up = $rptr_up_admin->{$key};
-        $i_up_admin->{$key} = 'up' if $up =~ /enabled/; 
-        $i_up_admin->{$key} = 'down' if $up =~ /disabled/; 
+        $i_up_admin->{$key} = 'up'   if $up =~ /enabled/;
+        $i_up_admin->{$key} = 'down' if $up =~ /disabled/;
     }
 
     return $i_up_admin;
 }
 
 sub i_up {
-    my $l1 = shift;
-    my $i_up = $l1->i_up2();
-    my $rptr_up = $l1->rptr_up();
+    my $l1      = shift;
+    my $partial = shift;
 
-    foreach my $key (keys %$rptr_up){
+    my $i_up    = $l1->SUPER::i_up($partial) || {};
+    my $rptr_up = $l1->rptr_up($partial)     || {};
+
+    foreach my $key ( keys %$rptr_up ) {
         my $up = $rptr_up->{$key};
-        $i_up->{$key} = 'up' if $up =~ /operational/; 
+        $i_up->{$key} = 'up' if $up =~ /operational/;
     }
 
     return $i_up;
-    
 }
+
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer1 - Perl5 Interface to network devices serving Layer1 only.
+SNMP::Info::Layer1 - SNMP Interface to network devices serving Layer1 only.
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -177,14 +176,13 @@ Max Baker (C<max@warped.org>)
  my $l1 = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 1
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $l1->class();
+ my $class = $l1->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
  # Let's get some basic Port information
@@ -201,14 +199,15 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-This class is usually used as a superclass for more specific device classes listed under 
-SNMP::Info::Layer1::*   Please read all docs under SNMP::Info first.
+This class is usually used as a superclass for more specific device classes
+listed under SNMP::Info::Layer1::*   Please read all docs under SNMP::Info
+first.
 
 Provides abstraction to the configuration information obtainable from a 
 Layer1 device through SNMP.  Information is stored in a number of MIBs.
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $l1 = new SNMP::Info::Layer1(...);
 
@@ -224,15 +223,16 @@ a more specific class using the method above.
 
 =over
 
-=item SNMP-REPEATER-MIB
-
-=item Inherited Classes
-
-MIBs required for SNMP::Info
+=item F<SNMP-REPEATER-MIB>
 
 =back
 
-SNMP-REPEATER-MIB needs to be extracted from ftp://ftp.cisco.com/pub/mibs/v1/v1.tar.gz
+MIBs required for L<SNMP::Info/"Required MIBs">
+
+See L<SNMP::Info/"Required MIBs"> for its MIB requirements.
+
+F<SNMP-REPEATER-MIB> needs to be extracted from
+ftp://ftp.cisco.com/pub/mibs/v1/v1.tar.gz
 
 =head1 GLOBALS
 
@@ -244,7 +244,7 @@ These are methods that return scalar value from SNMP
 
 Gets the number of ports under the interface mib 
 
-(B<ifNumber>)
+(C<ifNumber>)
 
 =back
 
@@ -252,9 +252,17 @@ Gets the number of ports under the interface mib
 
 =over
 
+=item $l1->model()
+
+Cross references $l1->id() with product IDs.
+
+For HP devices, removes C<'hpswitch'> from the name
+
+For Cisco devices, removes C<'sysid'> from the name
+
 =item $l1->vendor()
 
-Trys to discover the vendor from $l1->model() and $l1->vendor()
+Tries to discover the vendor from $l1->model() and $l1->vendor()
 
 =item $l1->ports()
 
@@ -264,15 +272,15 @@ Adds the values from rptr_ports() and ports_managed()
 
 Number of 'groups' in the Repeater MIB
 
-(B<rptrGroupCapacity>)
+(C<rptrGroupCapacity>)
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Global Methods imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -283,10 +291,16 @@ to a hash.
 
 =item $l1->interfaces()
 
+Returns reference to the map between IID and physical Port.
+
 =item $l1->i_up()
 
+Returns reference to map of IIDs to link status.
+
 =item $l1->i_up_admin()
 
+Returns reference to map of IIDs to administrative link status.
+
 =back
 
 =head2 Repeater MIB
@@ -297,32 +311,36 @@ to a hash.
 
 Number of ports in each group.
 
-(B<rptrGroupPortCapacity>)
+(C<rptrGroupPortCapacity>)
 
 =item $l1->rptr_port()
 
 Port number in Group
 
-(B<rptrPortIndex>)
+(C<rptrPortIndex>)
 
 =item $l1->rptr_slot()
 
 Group (slot) Number for given port.
 
-(B<rptrPortGroupIndex>)
+(C<rptrPortGroupIndex>)
 
 =item $l1->rptr_up_admin()
 
-(B<rptrPortAdminStatus>)
+(C<rptrPortAdminStatus>)
 
 =item $l1->rptr_up()
 
-(B<rptrPortOperStatus>)
+(C<rptrPortOperStatus>)
+
+=item $l1->rptr_last_src()
+
+(C<rptrAddrTrackNewLastSrcAddress>)
 
 =back
 
 =head2 Table Methods imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"TABLE METHODS"> for details.
 
 =cut

Info/Layer1/Allied.pm

@@ -1,66 +1,60 @@
 # SNMP::Info::Layer1::Allied
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1::Allied;
-$VERSION = 0.9;
-# $Id$
-use strict;
 
+use strict;
 use Exporter;
 use SNMP::Info::Layer1;
 
-@SNMP::Info::Layer1::Allied::ISA = qw/SNMP::Info::Layer1 Exporter/;
+@SNMP::Info::Layer1::Allied::ISA       = qw/SNMP::Info::Layer1 Exporter/;
 @SNMP::Info::Layer1::Allied::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
 
 # Set for No CDP
-%GLOBALS = (
-            %SNMP::Info::Layer1::GLOBALS,
-            'root_ip'   => 'actualIPAddr',
-            );
+%GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, 'root_ip' => 'actualIPAddr', );
 
-%FUNCS   = (%SNMP::Info::Layer1::FUNCS,
-            'i_name2'    => 'ifName',
-            'ati_p_name' => 'portName',
-            'ati_up'     => 'linkTestLED',
-            );
+%FUNCS = (
+    %SNMP::Info::Layer1::FUNCS,
+    'ati_p_name' => 'portName',
+    'ati_up'     => 'linkTestLED',
+);
 
-%MIBS    = (
-            %SNMP::Info::Layer1::MIBS,
-            'ATI-MIB' => 'atiPortGroupIndex'
-            );
+%MIBS = ( %SNMP::Info::Layer1::MIBS, 'ATI-MIB' => 'atiPortGroupIndex' );
 
-%MUNGE   = (%SNMP::Info::Layer1::MUNGE,
-            );
+%MUNGE = ( %SNMP::Info::Layer1::MUNGE, );
 
 sub vendor {
     return 'allied';
@@ -72,9 +66,9 @@ sub os {
 
 sub os_ver {
     my $allied = shift;
-    my $descr = $allied->description();
-    
-    if ($descr =~ m/version (\d+\.\d+)/){
+    my $descr  = $allied->description();
+
+    if ( $descr =~ m/version (\d+\.\d+)/ ) {
         return $1;
     }
 }
@@ -84,39 +78,40 @@ sub model {
 
     my $desc = $allied->description();
 
-    if ($desc =~ /(AT-\d{4}\S{1}?)/){
+    if ( $desc =~ /(AT-\d{4}\S{1}?)/ ) {
         return $1;
     }
-    return undef;
+    return;
 }
 
-sub i_name{
-    my $allied = shift;
+sub i_name {
+    my $allied  = shift;
+    my $partial = shift;
 
-    my $i_name = $allied->i_name2();
+    my $i_name     = $allied->orig_i_name($partial) || {};
+    my $ati_p_name = $allied->ati_p_name($partial)  || {};
 
-    my $ati_p_name = $allied->ati_p_name();
-
-    foreach my $port (keys %$ati_p_name){
+    foreach my $port ( keys %$ati_p_name ) {
         my $name = $ati_p_name->{$port};
-        $i_name->{$port} = $name if (defined $name and $name !~ /^\s*$/);
+        $i_name->{$port} = $name if ( defined $name and $name !~ /^\s*$/ );
     }
-    
+
     return $i_name;
 }
 
 sub i_up {
-    my $allied = shift;
+    my $allied  = shift;
+    my $partial = shift;
 
-    my $i_up = SNMP::Info::Layer1::i_up($allied);
-    my $ati_up = $allied->ati_up();
+    my $i_up = SNMP::Info::Layer1::i_up( $allied, $partial );
+    my $ati_up = $allied->ati_up($partial) || {};
 
-    foreach my $port (keys %$ati_up){
+    foreach my $port ( keys %$ati_up ) {
         my $up = $ati_up->{$port};
         $i_up->{$port} = 'down' if $up eq 'linktesterror';
-        $i_up->{$port} = 'up' if $up eq 'nolinktesterror';
+        $i_up->{$port} = 'up'   if $up eq 'nolinktesterror';
     }
-    
+
     return $i_up;
 }
 1;
@@ -128,7 +123,7 @@ SNMP::Info::Layer1::Allied - SNMP Interface to old Allied Hubs
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -136,14 +131,13 @@ Max Baker (C<max@warped.org>)
  my $allied = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myhub',
                           Community   => 'public',
                           Version     => 1
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $l1->class();
+ my $class = $allied->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
@@ -164,16 +158,14 @@ inherited methods.
 
 =over
 
-=item ATI-MIB 
-
-Download for your device from http://www.allied-telesyn.com/allied/support/
-
-=item Inherited Classes
-
-MIBs listed in SNMP::Info::Layer1 and its inherited classes.
+=item F<ATI-MIB>
 
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer1/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -198,19 +190,19 @@ Culls Version from description()
 
 Returns IP Address of Managed Hub.
 
-(B<actualIpAddr>)
+(C<actualIpAddr>)
 
 =item $allied->model()
 
-Trys to cull out AT-nnnnX out of the description field.
+Tries to cull out C<AT-nnnnX> out of the description field.
 
 =back
 
 =head2 Global Methods imported from SNMP::Info::Layer1
 
-See documentation in SNMP::Info::Layer1 for details.
+See L<SNMP::Info::Layer1/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 =head2 Overrides
 
@@ -233,16 +225,16 @@ the values of ati_up() to 'up' and 'down'.
 
 =item $allied->ati_p_name()
 
-(B<portName>)
+(C<portName>)
 
 =item $allied->ati_up()
 
-(B<linkTestLED>)
+(C<linkTestLED>)
 
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer1
 
-See documentation in SNMP::Info::Layer1 for details.
+See L<SNMP::Info::Layer1/"TABLE METHODS"> for details.
 
 =cut

Info/Layer1/Asante.pm

@@ -1,81 +1,72 @@
 # SNMP::Info::Layer1::Asante
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1::Asante;
-$VERSION = 0.9;
-# $Id$
-use strict;
 
+use strict;
 use Exporter;
 use SNMP::Info::Layer1;
 
-@SNMP::Info::Layer1::Asante::ISA = qw/SNMP::Info::Layer1 Exporter/;
+@SNMP::Info::Layer1::Asante::ISA       = qw/SNMP::Info::Layer1 Exporter/;
 @SNMP::Info::Layer1::Asante::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
 
 # Set for No CDP
-%GLOBALS = (
-            %SNMP::Info::Layer1::GLOBALS,
-            );
+%GLOBALS = ( %SNMP::Info::Layer1::GLOBALS, );
 
-%FUNCS   = (%SNMP::Info::Layer1::FUNCS,
-            'i_speed2'     => 'ifSpeed',
-            'i_mac2'       => 'ifPhysAddress',
-            'i_descr2'     => 'ifDescr',
-            'i_name2'      => 'ifName',
-            'asante_port'  => 'ePortIndex',
-            'asante_group' => 'ePortGrpIndex',
-            'i_type'       => 'ePortStateType',
-            'asante_up'    => 'ePortStateLinkStatus',
-            );
+%FUNCS = (
+    %SNMP::Info::Layer1::FUNCS,
+    'asante_port'  => 'ePortIndex',
+    'asante_group' => 'ePortGrpIndex',
+    'i_type'       => 'ePortStateType',
+    'asante_up'    => 'ePortStateLinkStatus',
+);
 
-%MIBS    = (
-            %SNMP::Info::Layer1::MIBS,
-            'ASANTE-HUB1012-MIB' => 'asante'
-            );
+%MIBS = ( %SNMP::Info::Layer1::MIBS, 'ASANTE-HUB1012-MIB' => 'asante' );
 
-%MUNGE   = (%SNMP::Info::Layer1::MUNGE,
-            'i_mac2' => \&SNMP::Info::munge_mac,
-            'i_speed2' => \&SNMP::Info::munge_speed,
-            );
+%MUNGE = ( %SNMP::Info::Layer1::MUNGE, );
 
 sub interfaces {
-    my $asante = shift;
+    my $asante  = shift;
+    my $partial = shift;
 
-    my $rptr_port = $asante->rptr_port();
+    my $rptr_port = $asante->rptr_port($partial) || {};
 
     my %interfaces;
 
-    foreach my $port (keys %$rptr_port){
+    foreach my $port ( keys %$rptr_port ) {
         $interfaces{$port} = $port;
     }
 
@@ -88,13 +79,13 @@ sub os {
 
 sub os_ver {
     my $asante = shift;
-    my $descr = $asante->description();
-    
-    if ($descr =~ /software v(\d+\.\d+)/){
+    my $descr  = $asante->description();
+
+    if ( $descr =~ /software v(\d+\.\d+)/ ) {
         return $1;
     }
 }
-    
+
 sub vendor {
     return 'asante';
 }
@@ -102,31 +93,33 @@ sub vendor {
 sub model {
     my $asante = shift;
 
-    my $id = $asante->id();
+    my $id    = $asante->id();
     my $model = &SNMP::translateObj($id);
 
     return $model;
 }
 
 sub i_up {
-    my $asante = shift;
+    my $asante  = shift;
+    my $partial = shift;
 
-    my $asante_up = $asante->asante_up();
+    my $asante_up = $asante->asante_up($partial) || {};
 
     my $i_up = {};
-    foreach my $port (keys %$asante_up){
+    foreach my $port ( keys %$asante_up ) {
         my $up = $asante_up->{$port};
         $i_up->{$port} = 'down' if $up =~ /on/;
-        $i_up->{$port} = 'up' if $up =~ /off/;
+        $i_up->{$port} = 'up'   if $up =~ /off/;
     }
-    
+
     return $i_up;
 }
 
 sub i_speed {
-    my $asante = shift;
+    my $asante  = shift;
+    my $partial = shift;
 
-    my $i_speed = $asante->i_speed2();
+    my $i_speed = $asante->orig_i_speed($partial) || {};
 
     my %i_speed;
 
@@ -136,9 +129,10 @@ sub i_speed {
 }
 
 sub i_mac {
-    my $asante = shift;
+    my $asante  = shift;
+    my $partial = shift;
 
-    my $i_mac = $asante->i_mac2();
+    my $i_mac = $asante->orig_i_mac($partial) || {};
 
     my %i_mac;
 
@@ -148,13 +142,14 @@ sub i_mac {
 }
 
 sub i_description {
-    return undef;
+    return;
 }
 
 sub i_name {
-    my $asante = shift;
+    my $asante  = shift;
+    my $partial = shift;
 
-    my $i_name = $asante->i_descr2();
+    my $i_name = $asante->orig_i_descr($partial) || {};
 
     my %i_name;
 
@@ -162,7 +157,9 @@ sub i_name {
 
     return \%i_name;
 }
+
 1;
+
 __END__
 
 =head1 NAME
@@ -171,7 +168,7 @@ SNMP::Info::Layer1::Asante - SNMP Interface to old Asante 1012 Hubs
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -179,14 +176,13 @@ Max Baker (C<max@warped.org>)
  my $asante = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $asante->class();
+ my $class = $asante->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
@@ -206,14 +202,14 @@ Asante device through SNMP.
 
 =over
 
-=item ASANTE-HUB1012-MIB
-
-Download from http://www.mibdepot.com
-
-=item MIBs listed in SNMP::Info::Layer1
+=item F<ASANTE-HUB1012-MIB>
 
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer1/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 =head2 Overrides
@@ -232,28 +228,36 @@ Culls software version from description()
 
 Returns 'asante' :)
 
-=item $asante->root_ip()
-
-Returns IP Address of Managed Hub.
-
-(B<actualIpAddr>)
-
 =item $asante->model()
 
-Trys to cull out AT-nnnnX out of the description field.
+Cross references $asante->id() to the F<ASANTE-HUB1012-MIB> and returns
+the results.
 
 =back
 
-=head2 Globals inherited from SNMP::Info::Layer1
+=head2 Global Methods imported from SNMP::Info::Layer1
 
-See documentation in SNMP::Info::Layer1 for details.
+See L<SNMP::Info::Layer1/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 =head2 Overrides
 
 =over
 
+=item $asante->interfaces()
+
+Returns reference to the map between IID and physical Port.
+
+=item $asante->i_description() 
+
+Description of the interface.
+
+=item $asante->i_mac()
+
+MAC address of the interface.  Note this is just the MAC of the port, not
+anything connected to it.
+
 =item $asante->i_name()
 
 Returns reference to map of IIDs to human-set port name.
@@ -261,7 +265,11 @@ Returns reference to map of IIDs to human-set port name.
 =item $asante->i_up()
 
 Returns reference to map of IIDs to link status.  Changes
-the values of ati_up() to 'up' and 'down'.
+the values of asante_up() to 'up' and 'down'.
+
+=item $asante->i_speed()
+
+Speed of the link, human format.
 
 =back
 
@@ -271,16 +279,16 @@ the values of ati_up() to 'up' and 'down'.
 
 =item $asante->ati_p_name()
 
-(B<portName>)
+(C<portName>)
 
 =item $asante->ati_up()
 
-(B<linkTestLED>)
+(C<linkTestLED>)
 
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer1
 
-See documentation in SNMP::Info::Layer1 for details.
+See L<SNMP::Info::Layer1/"TABLE METHODS"> for details.
 
 =cut

Info/Layer1/Bayhub.pm

@@ -1,88 +1,88 @@
 # SNMP::Info::Layer1::Bayhub
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
-#
-# Copyright (c) 2002,2003 Regents of the University of California
+# Copyright (c) 2008 Eric Miller, Max Baker
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer1::Bayhub;
-$VERSION = 0.9;
+
 use strict;
-
 use Exporter;
-use SNMP::Info;
-use SNMP::Info::Bridge;
-use SNMP::Info::NortelStack;
 use SNMP::Info::SONMP;
+use SNMP::Info::NortelStack;
+use SNMP::Info::Layer2;
 
-@SNMP::Info::Layer1::Bayhub::ISA = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::NortelStack SNMP::Info::SONMP Exporter/;
+@SNMP::Info::Layer1::Bayhub::ISA
+    = qw/SNMP::Info::SONMP SNMP::Info::NortelStack  SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer1::Bayhub::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-%MIBS    = (
-	    %SNMP::Info::MIBS,
-            %SNMP::Info::Bridge::MIBS,
-            %SNMP::Info::NortelStack::MIBS,	    
-            %SNMP::Info::SONMP::MIBS,
-            'S5-ETHERNET-COMMON-MIB'	=> 's5EnPortTable',
-            'S5-COMMON-STATS-MIB'	=> 's5CmStat',
-            );
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::NortelStack::MIBS,
+    %SNMP::Info::SONMP::MIBS,
+    'S5-ETHERNET-COMMON-MIB' => 's5EnPortTable',
+    'S5-COMMON-STATS-MIB'    => 's5CmStat',
+);
 
 %GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::NortelStack::GLOBALS,
-            %SNMP::Info::SONMP::GLOBALS,
-	    );
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::NortelStack::GLOBALS,
+    %SNMP::Info::SONMP::GLOBALS,
+);
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::NortelStack::FUNCS,
-            %SNMP::Info::SONMP::FUNCS,
-            # S5-ETHERNET-COMMON-MIB::s5EnPortTable
-            'bayhub_pb_index'	=> 's5EnPortBrdIndx',
-            'bayhub_pp_index'	=> 's5EnPortIndx',
-            'bayhub_up_admin'	=> 's5EnPortPartStatus',
-            'bayhub_up'		=> 's5EnPortLinkStatus',
-	    # S5-COMMON-STATS-MIB::s5CmSNodeTable
-            'bayhub_nb_index'	=> 's5CmSNodeBrdIndx',
-            'bayhub_np_index'	=> 's5CmSNodePortIndx',
-            'fw_mac'		=> 's5CmSNodeMacAddr',
-            );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::NortelStack::FUNCS,
+    %SNMP::Info::SONMP::FUNCS,
 
-%MUNGE   = (
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::NortelStack::MUNGE,
-            %SNMP::Info::SONMP::MUNGE,
-            );
+    # S5-ETHERNET-COMMON-MIB::s5EnPortTable
+    'bayhub_pb_index' => 's5EnPortBrdIndx',
+    'bayhub_pp_index' => 's5EnPortIndx',
+    'bayhub_up_admin' => 's5EnPortPartStatus',
+    'bayhub_up'       => 's5EnPortLinkStatus',
+
+    # S5-ETHERNET-COMMON-MIB::s5EnPortExtTable
+    'bayhub_p_speed' => 's5EnPortExtActiveSpeed',
+    'bayhub_p_cap'   => 's5EnPortExtHwCapability',
+    'bayhub_p_adv'   => 's5EnPortExtAutoNegAdv',
+
+    # S5-COMMON-STATS-MIB::s5CmSNodeTable
+    'bayhub_nb_index' => 's5CmSNodeBrdIndx',
+    'bayhub_np_index' => 's5CmSNodePortIndx',
+    'fw_mac'          => 's5CmSNodeMacAddr',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE, %SNMP::Info::NortelStack::MUNGE,
+    %SNMP::Info::SONMP::MUNGE,
+);
 
 sub layers {
     return '00000011';
@@ -93,72 +93,83 @@ sub os {
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
     my $bayhub = shift;
-    my $id = $bayhub->id();
-    return undef unless defined $id;
+    my $id     = $bayhub->id();
+    return unless defined $id;
     my $model = &SNMP::translateObj($id);
     return $id unless defined $model;
     $model =~ s/^sreg-//i;
 
-    return 'Baystack Hub' if ($model =~ /BayStackEth/);
-    return '5000' if ($model =~ /5000/);
-    return '5005' if ($model =~ /5005/);
+    return 'Baystack Hub' if ( $model =~ /BayStack/ );
+    return '5000'         if ( $model =~ /5000/ );
+    return '5005'         if ( $model =~ /5005/ );
     return $model;
 }
 
 # Hubs do not support ifMIB requirements for get MAC
-# and port status 
+# and port status
+
 sub i_index {
-    my $bayhub = shift;
-    my $b_index = $bayhub->bayhub_pb_index();
-    my $p_index = $bayhub->bayhub_pp_index();
-    my $model = $bayhub->model();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $b_index = $bayhub->bayhub_pb_index($partial) || {};
+    my $p_index = $bayhub->bayhub_pp_index($partial) || {};
+    my $model   = $bayhub->model()                   || 'Baystack Hub';
 
     my %i_index;
-    foreach my $iid (keys %$b_index){
+    foreach my $iid ( keys %$b_index ) {
         my $board = $b_index->{$iid};
         next unless defined $board;
-        my $port = $p_index->{$iid}||0;
+        my $port = $p_index->{$iid} || 0;
 
-        if ($model eq 'Baystack Hub') {
+        if ( $model eq 'Baystack Hub' ) {
             my $comidx = $board;
-               if (! ($comidx % 5)) {
-                  $board = ($board / 5);
-               } elsif ($comidx =~ /[16]$/) {
-                  $board = int($board/5);
-                  $port = 25;          
-               } elsif ($comidx =~ /[27]$/) {
-                  $board = int($board/5);
-                  $port = 26;          
-               }
-          }
+            if ( !( $comidx % 5 ) ) {
+                $board = ( $board / 5 );
+            }
+            elsif ( $comidx =~ /[16]$/ ) {
+                $board = int( $board / 5 );
+                $port  = 25;
+            }
+            elsif ( $comidx =~ /[27]$/ ) {
+                $board = int( $board / 5 );
+                $port  = 26;
+            }
+        }
 
-	my $index = ($board*256)+$port;
+        my $index = ( $board * 256 ) + $port;
 
-	$i_index{$iid} = $index;
+        $i_index{$iid} = $index;
     }
     return \%i_index;
 }
 
+# Partials don't really help in this class, but implemented
+# for consistency
+
 sub interfaces {
-    my $bayhub = shift;
-    my $i_index = $bayhub->i_index();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $i_index = $bayhub->i_index() || {};
 
     my %if;
-    foreach my $iid (keys %$i_index){
+    foreach my $iid ( keys %$i_index ) {
         my $index = $i_index->{$iid};
         next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
 
-	# Index numbers are deterministic slot * 256 + port
-	my $port = $index % 256;
-        my $slot = int($index / 256);
+        # Index numbers are deterministic slot * 256 + port
+        my $port = $index % 256;
+        my $slot = int( $index / 256 );
 
         my $slotport = "$slot.$port";
-    
+
         $if{$index} = $slotport;
     }
 
@@ -166,147 +177,195 @@ sub interfaces {
 }
 
 sub i_duplex {
-    my $bayhub = shift;
-    my $port_index  = $bayhub->i_index();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $port_index = $bayhub->i_index() || {};
 
     my %i_duplex;
-    foreach my $iid (keys %$port_index){
+    foreach my $iid ( keys %$port_index ) {
         my $index = $port_index->{$iid};
         next unless defined $index;
-    
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
         my $duplex = 'half';
-        $i_duplex{$index}=$duplex; 
+        $i_duplex{$index} = $duplex;
     }
     return \%i_duplex;
 }
 
 sub i_duplex_admin {
-    my $bayhub = shift;
-    my $port_index  = $bayhub->i_index();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $port_index = $bayhub->i_index() || {};
 
     my %i_duplex_admin;
-    foreach my $iid (keys %$port_index){
+    foreach my $iid ( keys %$port_index ) {
         my $index = $port_index->{$iid};
         next unless defined $index;
-    
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
         my $duplex = 'half';
-        $i_duplex_admin{$index}=$duplex; 
+        $i_duplex_admin{$index} = $duplex;
     }
     return \%i_duplex_admin;
 }
 
 sub i_speed {
-    my $bayhub = shift;
-    my $port_index  = $bayhub->i_index();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $port_index = $bayhub->i_index()        || {};
+    my $port_speed = $bayhub->bayhub_p_speed() || {};
 
     my %i_speed;
-    foreach my $iid (keys %$port_index){
+    foreach my $iid ( keys %$port_index ) {
         my $index = $port_index->{$iid};
         next unless defined $index;
-    
-        my $speed = '10 Mbps';
-        $i_speed{$index}=$speed; 
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $speed = $port_speed->{$iid} || '10 Mbps';
+
+        $speed = '10 Mbps'  if $speed =~ /bps10M/i;
+        $speed = '100 Mbps' if $speed =~ /bps100M/i;
+        $i_speed{$index} = $speed;
     }
     return \%i_speed;
 }
 
 sub i_up {
-    my $bayhub = shift;
-    my $port_index = $bayhub->i_index();
-    my $link_stat = $bayhub->bayhub_up();
-   
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $port_index = $bayhub->i_index()   || {};
+    my $link_stat  = $bayhub->bayhub_up() || {};
+
     my %i_up;
-    foreach my $iid (keys %$port_index){
+    foreach my $iid ( keys %$port_index ) {
         my $index = $port_index->{$iid};
         next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
         my $link_stat = $link_stat->{$iid};
-	next unless defined $link_stat;
-	
-        $link_stat = 'up' if $link_stat =~ /on/i;
+        next unless defined $link_stat;
+
+        $link_stat = 'up'   if $link_stat =~ /on/i;
         $link_stat = 'down' if $link_stat =~ /off/i;
-             
-        $i_up{$index}=$link_stat; 
+
+        $i_up{$index} = $link_stat;
     }
     return \%i_up;
 }
 
 sub i_up_admin {
-    my $bayhub = shift;
-    my $i_index = $bayhub->i_index();
-    my $link_stat = $bayhub->bayhub_up_admin();
- 
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $i_index   = $bayhub->i_index()         || {};
+    my $link_stat = $bayhub->bayhub_up_admin() || {};
+
     my %i_up_admin;
-    foreach my $iid (keys %$i_index){
-    	my $index = $i_index->{$iid};
-    	next unless defined $index;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
         my $link_stat = $link_stat->{$iid};
-	next unless defined $link_stat;
- 
-        $i_up_admin{$index}=$link_stat; 
+        next unless defined $link_stat;
+
+        $i_up_admin{$index} = $link_stat;
     }
     return \%i_up_admin;
 }
+
+sub set_i_up_admin {
+
+    # map setting to those the hub will understand
+    my %setting = qw/up 2 down 3/;
+
+    my $bayhub = shift;
+    my ( $setting, $iid ) = @_;
+
+    my $i_index = $bayhub->i_index() || {};
+    my %reverse_i_index = reverse %$i_index;
+
+    $setting = lc($setting);
+
+    return 0 unless defined $setting{$setting};
+
+    $iid = $reverse_i_index{$iid};
+
+    return $bayhub->set_bayhub_up_admin( $setting{$setting}, $iid );
+}
+
 # Hubs do not support the standard Bridge MIB
 sub bp_index {
-   my $bayhub = shift;
-    my $b_index = $bayhub->bayhub_nb_index();
-    my $p_index = $bayhub->bayhub_np_index();
-    my $model = $bayhub->model();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $b_index = $bayhub->bayhub_nb_index() || {};
+    my $p_index = $bayhub->bayhub_np_index() || {};
+    my $model   = $bayhub->model()           || 'Baystack Hub';
 
     my %bp_index;
-    foreach my $iid (keys %$b_index){
+    foreach my $iid ( keys %$b_index ) {
         my $board = $b_index->{$iid};
         next unless defined $board;
-        my $port = $p_index->{$iid}||0;
-		
-        if ($model eq 'Baystack Hub') {
+        my $port = $p_index->{$iid} || 0;
+
+        if ( $model eq 'Baystack Hub' ) {
             my $comidx = $board;
-               if (! ($comidx % 5)) {
-                  $board = ($board / 5);
-               } elsif ($comidx =~ /[16]$/) {
-                  $board = int($board/5);
-                  $port = 25;          
-               } elsif ($comidx =~ /[27]$/) {
-                  $board = int($board/5);
-                  $port = 26;          
-               }
-          }
+            if ( !( $comidx % 5 ) ) {
+                $board = ( $board / 5 );
+            }
+            elsif ( $comidx =~ /[16]$/ ) {
+                $board = int( $board / 5 );
+                $port  = 25;
+            }
+            elsif ( $comidx =~ /[27]$/ ) {
+                $board = int( $board / 5 );
+                $port  = 26;
+            }
+        }
 
-	my $index = ($board*256)+$port;
+        my $index = ( $board * 256 ) + $port;
+        next if ( defined $partial and $index !~ /^$partial$/ );
 
-	$bp_index{$index} = $index;
+        $bp_index{$index} = $index;
     }
     return \%bp_index;
 }
 
 sub fw_port {
-    my $bayhub = shift;
-    my $b_index = $bayhub->bayhub_nb_index();
-    my $p_index = $bayhub->bayhub_np_index();
-    my $model = $bayhub->model();
+    my $bayhub  = shift;
+    my $partial = shift;
+
+    my $b_index = $bayhub->bayhub_nb_index($partial) || {};
+    my $p_index = $bayhub->bayhub_np_index($partial) || {};
+    my $model   = $bayhub->model()                   || 'Baystack Hub';
 
     my %fw_port;
-    foreach my $iid (keys %$b_index){
+    foreach my $iid ( keys %$b_index ) {
         my $board = $b_index->{$iid};
         next unless defined $board;
-        my $port = $p_index->{$iid}||0;
+        my $port = $p_index->{$iid} || 0;
 
-      if ($model eq 'Baystack Hub') {
-          my $comidx = $board;
-             if (! ($comidx % 5)) {
-                $board = ($board / 5);
-             } elsif ($comidx =~ /[16]$/) {
-                $board = int($board/5);
-                $port = 25;          
-             } elsif ($comidx =~ /[27]$/) {
-                $board = int($board/5);
-                $port = 26;          
-             }
-       }
-	
-	my $index = ($board*256)+$port;
+        if ( $model eq 'Baystack Hub' ) {
+            my $comidx = $board;
+            if ( !( $comidx % 5 ) ) {
+                $board = ( $board / 5 );
+            }
+            elsif ( $comidx =~ /[16]$/ ) {
+                $board = int( $board / 5 );
+                $port  = 25;
+            }
+            elsif ( $comidx =~ /[27]$/ ) {
+                $board = int( $board / 5 );
+                $port  = 26;
+            }
+        }
 
-      $fw_port{$iid} = $index;
+        my $index = ( $board * 256 ) + $port;
+
+        $fw_port{$iid} = $index;
     }
     return \%fw_port;
 }
@@ -319,16 +378,102 @@ sub slot_offset {
     return 0;
 }
 
+# Devices do not support ENTITY-MIB use proprietary methods.
+
+sub e_index {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_index($partial);
+}
+
+sub e_class {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_class($partial);
+}
+
+sub e_descr {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_descr($partial);
+}
+
+sub e_name {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_name($partial);
+}
+
+sub e_fwver {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_fwver($partial);
+}
+
+sub e_hwver {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_hwver($partial);
+}
+
+sub e_parent {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_parent($partial);
+}
+
+sub e_pos {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_pos($partial);
+}
+
+sub e_serial {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_serial($partial);
+}
+
+sub e_swver {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_swver($partial);
+}
+
+sub e_type {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_type($partial);
+}
+
+sub e_vendor {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->ns_e_vendor($partial);
+}
+
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer1::Bayhub - SNMP Interface to Bay / Nortel Hubs
+SNMP::Info::Layer1::Bayhub - SNMP Interface to Bay/Nortel/Avaya Hubs
 
 =head1 AUTHOR
 
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -337,7 +482,6 @@ Eric Miller (C<eric@jeneric.org>)
     my $bayhub = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -351,10 +495,11 @@ Eric Miller (C<eric@jeneric.org>)
 =head1 DESCRIPTION
 
 Provides abstraction to the configuration information obtainable from a 
-Bayhub device through SNMP.  Also provides device MAC to port mapping through the propietary MIB. 
+Bay hub device through SNMP.  Also provides device MAC to port mapping through
+the proprietary MIB. 
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
 my $bayhub = new SNMP::Info::Layer1::Bayhub(...);
 
@@ -362,9 +507,7 @@ my $bayhub = new SNMP::Info::Layer1::Bayhub(...);
 
 =over
 
-=item SNMP::Info
-
-=item SNMP::Info::Bridge
+=item SNMP::Info::Layer2
 
 =item SNMP::Info::NortelStack
 
@@ -376,28 +519,19 @@ my $bayhub = new SNMP::Info::Layer1::Bayhub(...);
 
 =over
 
-=item S5-ETHERNET-COMMON-MIB
+=item F<S5-ETHERNET-COMMON-MIB>
 
-=item S5-COMMON-STATS-MIB
-
-=item Inherited Classes' MIBs
-
-See SNMP::Info for its own MIB requirements.
-
-See SNMP::Info::Bridge for its own MIB requirements.
-
-See SNMP::Info::NortelStack for its own MIB requirements.
-
-See SNMP::Info::SONMP for its own MIB requirements.
+=item F<S5-COMMON-STATS-MIB>
 
 =back
 
-MIBs can be found on the CD that came with your product.
+=head2 Inherited MIBs
 
-Or, they can be downloaded directly from Nortel Networks regardless of support
-contract status.  Go to http://www.nortelnetworks.com Technical Support, Browse Technical Support,
-Select by Product Families, BayStack, BayStack: Hubs - 150 Series, 10BASE-T,
-Software.  Filter on mibs and download the latest version's archive.
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::NortelStack/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::SONMP/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
 
@@ -407,18 +541,18 @@ These are methods that return scalar value from SNMP
 
 =item $bayhub->vendor()
 
-Returns 'Nortel'
+Returns 'avaya'
 
 =item $bayhub->os()
 
-Returns 'Bay Hub'
+Returns 'bay_hub'
 
 =item $bayhub->model()
 
-Cross references $bayhub->id() to the SYNOPTICS-MIB and returns
+Cross references $bayhub->id() to the F<SYNOPTICS-MIB> and returns
 the results.
 
-Removes sreg- from the model name
+Removes either Baystack Hub, 5000, or 5005 depending on the model.
 
 =back
 
@@ -428,7 +562,8 @@ Removes sreg- from the model name
 
 =item $bayhub->layers()
 
-Returns 00000011.  Class emulates Layer 2 functionality through proprietary MIBs.
+Returns 00000011.  Class emulates Layer 2 functionality through proprietary
+MIBs.
 
 =item  $bayhub->index_factor()
 
@@ -442,23 +577,19 @@ start at 0.  Returns 0.
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Globals imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info for details.
-
-=head2 Globals imported from SNMP::Info::Bridge
-
-See documentation in SNMP::Info::Bridge for details.
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::NortelStack
 
-See documentation in SNMP::Info::NortelStack for details.
+See L<SNMP::Info::NortelStack/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info::SONMP for details.
+See L<SNMP::Info::SONMP/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -471,7 +602,7 @@ to a hash.
 
 Returns reference to map of IIDs to Interface index. 
 
-Since hubs do not support ifIndex, the interface index is created using the
+Since hubs do not support C<ifIndex>, the interface index is created using the
 formula (board * 256 + port).
 
 =item $bayhub->interfaces()
@@ -488,15 +619,26 @@ Returns half, hubs do not support full duplex.
 
 =item $bayhub->i_speed()
 
-Currently returns 10 Mbps.  The class does not currently support 100 Mbps hubs.
+Returns interface speed.
 
 =item $bayhub->i_up()
 
-Returns (B<s5EnPortLinkStatus>) for each port.  Translates on/off to up/down.
+Returns (C<s5EnPortLinkStatus>) for each port.  Translates on/off to up/down.
 
 =item $bayhub->i_up_admin()
 
-Returns (B<s5EnPortPartStatus>) for each port.
+Returns (C<s5EnPortPartStatus>) for each port.
+
+=item $bayhub->set_i_up_admin(state, ifIndex)
+
+Sets port state, must be supplied with state and port C<ifIndex>
+
+State choices are 'up' or 'down'
+
+Example:
+  my %if_map = reverse %{$bayhub->interfaces()};
+  $bayhub->set_i_up_admin('down', $if_map{'1.1'}) 
+      or die "Couldn't change port state. ",$bayhub->error(1);
 
 =item $bayhub->bp_index()
 
@@ -505,29 +647,83 @@ both the keys and values.
 
 =item $bayhub->fw_port()
 
-Returns reference to map of IIDs of the S5-COMMON-STATS-MIB::s5CmSNodeTable
+Returns reference to map of IIDs of the C<S5-COMMON-STATS-MIB::s5CmSNodeTable>
 to the Interface index.
 
 =item $bayhub->fw_mac()
 
-(B<s5CmSNodeMacAddr>)
+(C<s5CmSNodeMacAddr>)
 
 =back
 
-=head2 Table Methods imported from SNMP::Info
+=head2 Pseudo F<ENTITY-MIB> Information
 
-See documentation in SNMP::Info for details.
+These devices do not support F<ENTITY-MIB>.  These methods emulate Physical
+Table methods using F<S5-CHASSIS-MIB>.  See
+L<SNMP::Info::NortelStack/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::Bridge
+=over
 
-See documentation in SNMP::Info::Bridge for details.
+=item $bayhub->e_index() 
+
+Returns ns_e_index().
+
+=item $bayhub->e_class() 
+
+Returns ns_e_class().
+
+=item $bayhub->e_descr() 
+
+Returns ns_e_descr().
+
+=item $bayhub->e_name() 
+
+Returns ns_e_name().
+
+=item $bayhub->e_fwver() 
+
+Returns ns_e_fwver().
+
+=item $bayhub->e_hwver() 
+
+Returns ns_e_hwver().
+
+=item $bayhub->e_parent() 
+
+Returns ns_e_parent().
+
+=item $bayhub->e_pos() 
+
+Returns ns_e_pos().
+
+=item $bayhub->e_serial() 
+
+Returns ns_e_serial().
+
+=item $bayhub->e_swver() 
+
+Returns ns_e_swver().
+
+=item $bayhub->e_type() 
+
+Returns ns_e_type().
+
+=item $bayhub->e_vendor() 
+
+Returns ns_e_vendor().
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::NortelStack
 
-See documentation in SNMP::Info::NortelStack for details.
+See L<SNMP::Info::NortelStack/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info::SONMP for details.
+See L<SNMP::Info::SONMP/"TABLE METHODS"> for details.
 
 =cut

Info/Layer1/Cyclades.pm

@@ -0,0 +1,444 @@
+# SNMP::Info::Layer1::Cyclades
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer1::Cyclades;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer1;
+
+@SNMP::Info::Layer1::Cyclades::ISA       = qw/SNMP::Info::Layer1 Exporter/;
+@SNMP::Info::Layer1::Cyclades::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer1::MIBS,
+    'CYCLADES-ACS-SYS-MIB'  => 'cyACSversion',
+    'CYCLADES-ACS-CONF-MIB' => 'cyEthIPaddr',
+    'CYCLADES-ACS-INFO-MIB' => 'cyISPortTty',
+);
+
+%GLOBALS = (
+
+    # CYCLADES-ACS-SYS-MIB
+    %SNMP::Info::Layer1::GLOBALS,
+    'os_ver'     => 'cyACSversion',
+    'cy_model'   => 'cyACSpname',
+    'serial'     => 'cyACSDevId',
+    'root_ip'    => 'cyEthIPaddr',
+    'ps1_status' => 'cyACSPw1',
+    'ps2_status' => 'cyACSPw2',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer1::FUNCS,
+
+    # CYCLADES-ACS-INFO-MIB::cyInfoSerialTable
+    'cy_port_tty'   => 'cyISPortTty',
+    'cy_port_name'  => 'cyISPortName',
+    'cy_port_speed' => 'cyISPortSpeed',
+    'cy_port_cd'    => 'cyISPortSigCD',
+
+    # CYCLADES-ACS-CONF-MIB::cySerialPortTable
+    'cy_port_socket' => 'cySPortSocketPort',
+);
+
+%MUNGE = ( %SNMP::Info::Layer1::MUNGE, );
+
+# These devices don't have a FDB and we probably don't want to poll for ARP
+# cache so turn off reported L2/L3.
+sub layers {
+    return '01000001';
+}
+
+sub os {
+    return 'cyclades';
+}
+
+sub vendor {
+    return 'cyclades';
+}
+
+sub model {
+    my $cyclades = shift;
+
+    my $model = $cyclades->cy_model();
+
+    return unless defined $model;
+
+    return lc($model);
+}
+
+# Extend interface methods to include serial ports
+#
+# Partials don't really help in this class, but implemented
+# for consistency
+
+sub i_index {
+    my $cyclades = shift;
+    my $partial  = shift;
+
+    my $orig_index = $cyclades->orig_i_index($partial) || {};
+    my $cy_index   = $cyclades->cy_port_socket()       || {};
+
+    my %i_index;
+    foreach my $iid ( keys %$orig_index ) {
+        my $index = $orig_index->{$iid};
+        next unless defined $index;
+
+        $i_index{$iid} = $index;
+    }
+
+    # Use alternative labeling system for the serial port, listening socket
+    # to avoid conflicts with ifIndex.
+    foreach my $iid ( keys %$cy_index ) {
+        my $index = $cy_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
+        $i_index{$index} = $index;
+    }
+
+    return \%i_index;
+}
+
+sub interfaces {
+    my $cyclades = shift;
+    my $partial  = shift;
+
+    my $i_descr  = $cyclades->orig_i_description($partial) || {};
+    my $cy_index = $cyclades->cy_port_socket()             || {};
+    my $cy_p_tty = $cyclades->cy_port_tty()                || {};
+
+    my %if;
+    foreach my $iid ( keys %$i_descr ) {
+        my $descr = $i_descr->{$iid};
+        next unless defined $descr;
+
+        $if{$iid} = $descr;
+    }
+
+    foreach my $iid ( keys %$cy_p_tty ) {
+        my $index = $cy_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $name = $cy_p_tty->{$iid};
+        next unless defined $name;
+
+        $if{$index} = $name;
+    }
+
+    return \%if;
+}
+
+sub i_speed {
+    my $cyclades = shift;
+    my $partial  = shift;
+
+    my $i_speed    = $cyclades->orig_i_speed($partial) || {};
+    my $cy_index   = $cyclades->cy_port_socket()       || {};
+    my $cy_p_speed = $cyclades->cy_port_speed()        || {};
+
+    my %i_speed;
+    foreach my $iid ( keys %$i_speed ) {
+        my $speed = $i_speed->{$iid};
+        next unless defined $speed;
+
+        $i_speed{$iid} = $speed;
+    }
+
+    foreach my $iid ( keys %$cy_p_speed ) {
+        my $index = $cy_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $speed = $cy_p_speed->{$iid};
+        next unless defined $speed;
+
+        $i_speed{$index} = $speed;
+    }
+
+    return \%i_speed;
+}
+
+sub i_up {
+    my $cyclades = shift;
+    my $partial  = shift;
+
+    my $i_up     = $cyclades->orig_i_up($partial) || {};
+    my $cy_index = $cyclades->cy_port_socket()    || {};
+    my $cy_p_up  = $cyclades->cy_port_cd()        || {};
+
+    my %i_up;
+    foreach my $iid ( keys %$i_up ) {
+        my $up = $i_up->{$iid};
+        next unless defined $up;
+
+        $i_up{$iid} = $up;
+    }
+
+    foreach my $iid ( keys %$cy_p_up ) {
+        my $index = $cy_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $up = $cy_p_up->{$iid};
+        next unless defined $up;
+
+        $i_up{$index} = $up;
+    }
+
+    return \%i_up;
+}
+
+sub i_description {
+    my $cyclades = shift;
+    my $partial  = shift;
+
+    my $i_desc    = $cyclades->orig_i_description($partial) || {};
+    my $cy_index  = $cyclades->cy_port_socket()             || {};
+    my $cy_p_desc = $cyclades->cy_port_name()               || {};
+
+    my %descr;
+    foreach my $iid ( keys %$i_desc ) {
+        my $desc = $i_desc->{$iid};
+        next unless defined $desc;
+
+        $descr{$iid} = $desc;
+    }
+
+    foreach my $iid ( keys %$cy_p_desc ) {
+        my $index = $cy_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $desc = $cy_p_desc->{$iid};
+        next unless defined $desc;
+
+        $descr{$index} = $desc;
+    }
+
+    return \%descr;
+}
+
+sub i_name {
+    my $cyclades = shift;
+    my $partial  = shift;
+
+    my $i_name    = $cyclades->orig_i_name($partial) || {};
+    my $cy_index  = $cyclades->cy_port_socket()      || {};
+    my $cy_p_desc = $cyclades->cy_port_name()        || {};
+
+    my %i_name;
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+
+        $i_name{$iid} = $name;
+    }
+
+    foreach my $iid ( keys %$cy_p_desc ) {
+        my $index = $cy_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $name = $cy_p_desc->{$iid};
+        next unless defined $name;
+
+        $i_name{$index} = $name;
+    }
+
+    return \%i_name;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer1::Cyclades - SNMP Interface to Cyclades terminal servers
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+    #Let SNMP::Info determine the correct subclass for you.
+
+    my $cyclades = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $cyclades->class();
+    print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+Cyclades device through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $cyclades = new SNMP::Info::Layer1::Cyclades(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer1
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CYCLADES-ACS-SYS-MIB>
+
+=item F<CYCLADES-ACS-CONF-MIB>
+
+=item F<CYCLADES-ACS-INFO-MIB>
+
+=back
+
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer1/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $cyclades->os_ver()
+
+(C<cyACSversion>)
+
+=item $cyclades->serial()
+
+(C<cyACSDevId>)
+
+=item $cyclades->root_ip()
+
+(C<cyEthIPaddr>)
+
+=item $cyclades->ps1_status()
+
+(C<cyACSPw1>)
+
+=item $cyclades->ps2_status()
+
+(C<cyACSPw2>)
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $cyclades->layers()
+
+Returns 01000001.  These devices don't have a FDB and we probably don't want
+to poll for an ARP cache so turn off reported Layer 2 and Layer 3.
+
+=item $cyclades->vendor()
+
+Returns 'cyclades'
+
+=item $cyclades->os()
+
+Returns 'cyclades'
+
+=item $cyclades->model()
+
+Returns lower case (C<cyACSpname>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer1
+
+See L<SNMP::Info::Layer1/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $cyclades->i_index()
+
+Returns reference to map of IIDs to Interface index. 
+
+Extended to include serial ports.  Serial ports are indexed with the
+alternative labeling system for the serial port, the listening socket port
+C<cySPortSocketPort> to avoid conflicts with C<ifIndex>.  
+
+=item $cyclades->interfaces()
+
+Returns reference to map of IIDs to physical ports.  Extended to include
+serial ports, C<cyISPortTty>.
+
+=item $cyclades->i_speed()
+
+Returns interface speed.  Extended to include serial ports, C<cyISPortSpeed>. 
+
+=item $cyclades->i_up()
+
+Returns link status for each port.  Extended to include serial ports,
+C<cyISPortSigCD>.
+
+=item $cyclades->i_description()
+
+Returns description of each port.  Extended to include serial ports,
+C<cyISPortName>.
+
+=item $cyclades->i_name()
+
+Returns name of each port.  Extended to include serial ports, C<cyISPortName>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer1
+
+See L<SNMP::Info::Layer1/"TABLE METHODS"> for details.
+
+=cut

Info/Layer1/S3000.pm

@@ -0,0 +1,548 @@
+# SNMP::Info::Layer1::S3000
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer1::S3000;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+
+@SNMP::Info::Layer1::S3000::ISA       = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer1::S3000::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    'SYNOPTICS-ETHERNET-MIB' => 's3EnetPortTable',
+    'SYNOPTICS-COMMON-MIB'   => 's3AgentType',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+
+    # From SYNOPTICS-COMMON-MIB
+    'os_bin'          => 's3AgentFwVer',
+    's3000_major_ver' => 's3AgentSwMajorVer',
+    's3000_minor_ver' => 's3AgentSwMinorVer',
+    's3000_maint_ver' => 's3AgentSwMaintVer',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+
+    # SYNOPTICS-ETHERNET-MIB::s3EnetPortTable
+    's3000_pb_index' => 's3EnetPortBoardIndex',
+    's3000_pp_index' => 's3EnetPortIndex',
+    's3000_up_admin' => 's3EnetPortPartStatus',
+    's3000_up'       => 's3EnetPortLinkStatus',
+
+    # SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesTable
+    's3000_nb_index' => 's3EnetShowNodesSlotIndex',
+    's3000_np_index' => 's3EnetShowNodesPortIndex',
+    'fw_mac'         => 's3EnetShowNodesMacAddress',
+
+    # SYNOPTICS-ETHERNET-MIB::s3EnetTopNmmTable
+    's3000_topo_port' => 's3EnetTopNmmPort',
+    's3000_topo_mac'  => 's3EnetTopNmmMacAddr',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE, 's3000_topo_mac' => \&SNMP::Info::munge_mac
+);
+
+sub layers {
+    return '00000011';
+}
+
+sub os {
+    return 'synoptics';
+}
+
+sub vendor {
+    return 'nortel';
+}
+
+sub model {
+    my $s3000 = shift;
+    my $id    = $s3000->id();
+    return unless defined $id;
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+    $model =~ s/^s3reg-//i;
+
+    return $1 if ( $model =~ /((\d+){3}[\dX])/ );
+    return $model;
+}
+
+sub os_ver {
+    my $s3000     = shift;
+    my $major_ver = $s3000->s3000_major_ver() || 0;
+    my $minor_ver = $s3000->s3000_minor_ver() || 0;
+    my $maint_ver = $s3000->s3000_maint_ver() || 0;
+
+    my $ver = "$major_ver.$minor_ver.$maint_ver";
+    return $ver;
+}
+
+sub mac {
+    my $s3000     = shift;
+    my $topo_port = $s3000->s3000_topo_port();
+    my $topo_mac  = $s3000->s3000_topo_mac();
+
+    foreach my $entry ( keys %$topo_port ) {
+        my $port = $topo_port->{$entry};
+        next unless $port == 0;
+        my $mac = $topo_mac->{$entry};
+        return $mac;
+    }
+
+    # Topology turned off, not supported.
+    return;
+}
+
+# Hubs do not support ifMIB requirements for get MAC
+# and port status
+
+sub i_index {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $b_index = $s3000->s3000_pb_index($partial) || {};
+    my $p_index = $s3000->s3000_pp_index($partial) || {};
+
+    my %i_index;
+    foreach my $iid ( keys %$b_index ) {
+        my $board = $b_index->{$iid};
+        next unless defined $board;
+        my $port = $p_index->{$iid} || 0;
+
+        # We need to make up an index for multiple board instances.
+        my $index = ( $board * 256 ) + $port;
+
+        $i_index{$iid} = $index;
+    }
+    return \%i_index;
+}
+
+# Partials don't really help in this class, but implemented
+# for consistency
+
+sub interfaces {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $i_index = $s3000->i_index() || {};
+
+    my %if;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
+        # Index numbers are deterministic slot * 256 + port - see i_index()
+        my $port = $index % 256;
+        my $slot = int( $index / 256 );
+
+        my $slotport = "$slot.$port";
+
+        $if{$index} = $slotport;
+    }
+
+    return \%if;
+}
+
+sub i_duplex {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $port_index = $s3000->i_index() || {};
+
+    my %i_duplex;
+    foreach my $iid ( keys %$port_index ) {
+        my $index = $port_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
+        # Hubs only function half duplex
+        my $duplex = 'half';
+        $i_duplex{$index} = $duplex;
+    }
+    return \%i_duplex;
+}
+
+sub i_duplex_admin {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $port_index = $s3000->i_index() || {};
+
+    my %i_duplex_admin;
+    foreach my $iid ( keys %$port_index ) {
+        my $index = $port_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
+        # Hubs only function half duplex
+        my $duplex = 'half';
+        $i_duplex_admin{$index} = $duplex;
+    }
+    return \%i_duplex_admin;
+}
+
+sub i_speed {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $port_index = $s3000->i_index() || {};
+
+    my %i_speed;
+    foreach my $iid ( keys %$port_index ) {
+        my $index = $port_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
+        # These hubs only support 10 Mbs
+        my $speed = '10000000';
+        $i_speed{$index} = $speed;
+    }
+    return \%i_speed;
+}
+
+sub i_up {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $port_index = $s3000->i_index()  || {};
+    my $link_stat  = $s3000->s3000_up() || {};
+
+    my %i_up;
+    foreach my $iid ( keys %$port_index ) {
+        my $index = $port_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $link_stat = $link_stat->{$iid};
+        next unless defined $link_stat;
+
+        $link_stat = 'up'   if $link_stat =~ /on/i;
+        $link_stat = 'down' if $link_stat =~ /off/i;
+
+        $i_up{$index} = $link_stat;
+    }
+    return \%i_up;
+}
+
+sub i_up_admin {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $i_index   = $s3000->i_index()        || {};
+    my $link_stat = $s3000->s3000_up_admin() || {};
+
+    my %i_up_admin;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+        my $link_stat = $link_stat->{$iid};
+        next unless defined $link_stat;
+
+        $i_up_admin{$index} = $link_stat;
+    }
+    return \%i_up_admin;
+}
+
+sub set_i_up_admin {
+
+    # map setting to those the hub will understand
+    my %setting = qw/up 2 down 3/;
+
+    my $s3000 = shift;
+    my ( $setting, $iid ) = @_;
+
+    my $i_index = $s3000->i_index() || {};
+    my %reverse_i_index = reverse %$i_index;
+
+    $setting = lc($setting);
+
+    return 0 unless defined $setting{$setting};
+
+    $iid = $reverse_i_index{$iid};
+
+    return $s3000->set_s3000_up_admin( $setting{$setting}, $iid );
+}
+
+# Hubs do not support the standard Bridge MIB
+sub bp_index {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $b_index = $s3000->s3000_nb_index() || {};
+    my $p_index = $s3000->s3000_np_index() || {};
+    my $model   = $s3000->model();
+
+    my %bp_index;
+    foreach my $iid ( keys %$b_index ) {
+        my $board = $b_index->{$iid};
+        next unless defined $board;
+        my $port = $p_index->{$iid} || 0;
+
+        my $index = ( $board * 256 ) + $port;
+        next if ( defined $partial and $index !~ /^$partial$/ );
+
+        $bp_index{$index} = $index;
+    }
+    return \%bp_index;
+}
+
+sub fw_port {
+    my $s3000   = shift;
+    my $partial = shift;
+
+    my $b_index = $s3000->s3000_nb_index($partial) || {};
+    my $p_index = $s3000->s3000_np_index($partial) || {};
+    my $model   = $s3000->model();
+
+    my %fw_port;
+    foreach my $iid ( keys %$b_index ) {
+        my $board = $b_index->{$iid};
+        next unless defined $board;
+        my $port = $p_index->{$iid} || 0;
+
+        my $index = ( $board * 256 ) + $port;
+
+        $fw_port{$iid} = $index;
+    }
+    return \%fw_port;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer1::S3000 - SNMP Interface to Synoptics / Nortel Hubs
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+    #Let SNMP::Info determine the correct subclass for you.
+
+    my $s3000 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $s3000->class();
+    print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+Bay hub device through SNMP.  Also provides device MAC to port mapping through
+the proprietary MIB.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $s3000 = new SNMP::Info::Layer1::S3000(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<SYNOPTICS-COMMON-MIB>
+
+=item F<SYNOPTICS-ETHERNET-MIB>
+
+=back
+
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $s3000->vendor()
+
+Returns 'nortel'
+
+=item $s3000->os()
+
+Returns 'synoptics'
+
+=item $s3000->model()
+
+Cross references $s3000->id() to the F<SYNOPTICS-MIB> and returns
+the results.
+
+Removes C<sreg-> from the model name and returns only the numeric model
+identifier.
+
+=item $stack->os_ver()
+
+Returns the software version specified as major.minor.maint.
+
+(C<s3AgentSwMajorVer>).(C<s3AgentSwMinorVer>).(C<s3AgentSwMaintVer>)
+
+=item $stack->os_bin()
+
+Returns the firmware version. (C<s3AgentFwVer>)
+
+=item $s3000->mac()
+
+Returns MAC of the advertised IP address of the device. 
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $s3000->layers()
+
+Returns 00000011.  Class emulates Layer 2 functionality through proprietary
+MIBs.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $s3000->i_index()
+
+Returns reference to map of IIDs to Interface index. 
+
+Since hubs do not support C<ifIndex>, the interface index is created using the
+formula (board * 256 + port).  This is required to support devices with more
+than one module.
+
+=item $s3000->interfaces()
+
+Returns reference to map of IIDs to physical ports. 
+
+=item $s3000->i_duplex()
+
+Returns half, hubs do not support full duplex. 
+
+=item $s3000->i_duplex_admin()
+
+Returns half, hubs do not support full duplex.
+
+=item $s3000->i_speed()
+
+Returns 10000000.  The hubs only support 10 Mbs Ethernet.
+
+=item $s3000->i_up()
+
+Returns (C<s3EnetPortLinkStatus>) for each port.  Translates on/off to
+up/down.
+
+=item $s3000->i_up_admin()
+
+Returns (C<s3EnetPortPartStatus>) for each port.
+
+=item $s3000->set_i_up_admin(state, ifIndex)
+
+Sets port state, must be supplied with state and port C<ifIndex>
+
+State choices are 'up' or 'down'
+
+Example:
+  my %if_map = reverse %{$s3000->interfaces()};
+  $s3000->set_i_up_admin('down', $if_map{'1.1'}) 
+      or die "Couldn't change port state. ",$s3000->error(1);
+
+=item $s3000->bp_index()
+
+Simulates bridge MIB by returning reference to a hash containing the index for
+both the keys and values.
+
+=item $s3000->fw_port()
+
+Returns reference to map of IIDs of the
+C<SYNOPTICS-ETHERNET-MIB::s3EnetShowNodesTable> to the Interface index.
+
+=item $s3000->fw_mac()
+
+(C<s3EnetShowNodesMacAddress>)
+
+=item $s3000->s3000_topo_port()
+
+Returns reference to hash.  Key: Table entry, Value:Port Number
+(interface iid)
+
+(C<s3EnetTopNmmPort>)
+
+=item $s3000->s3000_topo_mac()
+
+(C<s3EnetTopNmmMacAddr>)
+
+Returns reference to hash.  Key: Table entry, Value:Remote MAC address
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2.pm

@@ -1,101 +1,89 @@
-# SNMP::Info::Layer2 - SNMP Interface to Layer2 Devices 
-# Max Baker <max@warped.org>
+# SNMP::Info::Layer2 - SNMP Interface to Layer2 Devices
+# $Id$
 #
-# Copyright (c) 2004 Max Baker -- All changes from Version 0.7 on
+# Copyright (c) 2008 Max Baker -- All changes from Version 0.7 on
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 use SNMP::Info::Bridge;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
+use SNMP::Info::Entity;
+use SNMP::Info::PowerEthernet;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE $INIT/;
-
-@SNMP::Info::Layer2::ISA = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::CDP SNMP::Info::CiscoStats Exporter/;
+@SNMP::Info::Layer2::ISA
+    = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::Entity SNMP::Info::PowerEthernet Exporter/;
 @SNMP::Info::Layer2::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
 
-%MIBS = ( %SNMP::Info::MIBS, 
-          %SNMP::Info::Bridge::MIBS,
-          %SNMP::Info::CDP::MIBS,
-          %SNMP::Info::CiscoStats::MIBS,
-          'CISCO-PRODUCTS-MIB' => 'sysName',    # for model()
-          'CISCO-STACK-MIB'    => 'wsc1900sysID',    # some older catalysts live here
-          'ENTITY-MIB'         => 'entPhysicalName', # for serial stuff
-        );
+%MIBS = (
+    %SNMP::Info::MIBS,         %SNMP::Info::Bridge::MIBS,
+    %SNMP::Info::Entity::MIBS, %SNMP::Info::PowerEthernet::MIBS,
+);
 
 %GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::CDP::GLOBALS,
-            %SNMP::Info::CiscoStats::GLOBALS,
-            'serial1'   => '.1.3.6.1.4.1.9.3.6.3.0', # OLD-CISCO-CHASSIS-MIB::chassisId.0
-            );
+    %SNMP::Info::GLOBALS,
+    %SNMP::Info::Bridge::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+    %SNMP::Info::PowerEthernet::GLOBALS,
+    'serial1' =>
+        '.1.3.6.1.4.1.9.3.6.3.0',    # OLD-CISCO-CHASSIS-MIB::chassisId.0
+);
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::CDP::FUNCS,
-            %SNMP::Info::CiscoStats::FUNCS,
-            'ent_serial' => 'entPhysicalSerialNum',
-            'ent_chassis'=> 'entPhysicalDescr',
-           );
+%FUNCS = (
+    %SNMP::Info::FUNCS,         %SNMP::Info::Bridge::FUNCS,
+    %SNMP::Info::Entity::FUNCS, %SNMP::Info::PowerEthernet::FUNCS,
+);
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::CDP::MUNGE,
-            %SNMP::Info::CiscoStats::MUNGE,
-         );
+
+    # Inherit all the built in munging
+    %SNMP::Info::MUNGE,
+    %SNMP::Info::Bridge::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+    %SNMP::Info::PowerEthernet::MUNGE,
+);
 
 # Method OverRides
 
 # $l2->model() - Looks at sysObjectID which gives the oid of the system
-#       name, contained in a propriatry MIB. 
+#       name, contained in a propriatry MIB.
 sub model {
-    my $l2 = shift;
-    my $id = $l2->id();
-    my $model = &SNMP::translateObj($id);
-   
+    my $l2    = shift;
+    my $id    = $l2->id();
+    my $model = &SNMP::translateObj($id) || $id || '';
+
     # HP
     $model =~ s/^hpswitch//i;
 
@@ -108,15 +96,15 @@ sub model {
 }
 
 sub vendor {
-    my $l2 = shift;
+    my $l2    = shift;
     my $model = $l2->model();
     my $descr = $l2->description();
 
-    if ($model =~ /hp/i or $descr =~ /hp/i) {
+    if ( $model =~ /hp/i or $descr =~ /\bhp\b/i ) {
         return 'hp';
     }
 
-    if ($model =~ /catalyst/i or $descr =~ /(catalyst|cisco)/i) {
+    if ( $model =~ /catalyst/i or $descr =~ /(catalyst|cisco)/i ) {
         return 'cisco';
     }
 
@@ -124,64 +112,55 @@ sub vendor {
 
 sub serial {
     my $l2 = shift;
-    
-    my $serial1     = $l2->serial1();
-    my $ent_chassis = $l2->ent_chassis() || {};
-    my $ent_serial  = $l2->ent_serial() || {};
-    
-    my $serial2 = $ent_serial->{1}  || undef;
-    my $chassis = $ent_chassis->{1} || undef;
+
+    my $serial1  = $l2->serial1();
+    my $e_descr  = $l2->e_descr() || {};
+    my $e_serial = $l2->e_serial() || {};
+
+    my $serial2 = $e_serial->{1} || undef;
+    my $chassis = $e_descr->{1}  || undef;
 
     # precedence
     #   serial2,chassis parse,serial1
-    return $serial2 if (defined $serial2 and $serial2 !~ /^\s*$/);
-    return $1 if (defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i);
-    return $serial1 if (defined $serial1 and $serial1 !~ /^\s*$/);
+    return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
+    return $1
+        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
+    return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
-    return undef;
+    return;
 }
 
 sub i_ignore {
-    my $l2 = shift;
+    my $l2      = shift;
+    my $partial = shift;
 
-    my $i_type = $l2->i_type();
+    my $i_type = $l2->i_type($partial) || {};
 
     my %i_ignore = ();
 
-    foreach my $if (keys %$i_type){
+    foreach my $if ( keys %$i_type ) {
         my $type = $i_type->{$if};
-        $i_ignore{$if}++ 
-            if $type =~ /(loopback|propvirtual|other|cpu)/i;
+        $i_ignore{$if}++
+            if $type =~ /(loopback|other|cpu)/i;
     }
 
     return \%i_ignore;
-}    
+}
 
-# By Default we'll use the description field
 sub interfaces {
-    my $l2 = shift;
-    my $interfaces = $l2->i_index();
-    my $i_descr    = $l2->i_description(); 
-    my $i_name     = $l2->i_name();
+    my $l2      = shift;
+    my $partial = shift;
 
-    my %if;
-    foreach my $iid (keys %$interfaces){
+    my $interfaces = $l2->i_index($partial)       || {};
+    my $i_descr    = $l2->i_description($partial) || {};
+
+    # Replace the Index with the ifDescr field.
+    foreach my $iid ( keys %$i_descr ) {
         my $port = $i_descr->{$iid};
-        my $name = $i_name->{$iid};
-        $port = $name if (defined $name and $name !~ /^\s*$/);
         next unless defined $port;
-
-        # Cisco 1900 has a space in some of its port descr.
-        # get rid of any weird characters
-        $port =~ s/[^\d\/,()\w]+//gi;
-    
-        # Translate Cisco 2926,etc. from 1/5 to 1.5
-        $port =~ s/\//\./ if ($port =~ /^\d+\/\d+$/);
-
-        $if{$iid} = $port;
+        $interfaces->{$iid} = $port;
     }
-
-    return \%if
+    return $interfaces;
 }
 
 1;
@@ -189,11 +168,11 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2 - Perl5 Interface to network devices serving Layer2 only.
+SNMP::Info::Layer2 - SNMP Interface to network devices serving Layer2 only.
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -201,7 +180,6 @@ Max Baker (C<max@warped.org>)
  my $l2 = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -224,14 +202,15 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-This class is usually used as a superclass for more specific device classes listed under 
-SNMP::Info::Layer2::*   Please read all docs under SNMP::Info first.
+This class is usually used as a superclass for more specific device classes
+listed under SNMP::Info::Layer2::*   Please read all docs under SNMP::Info
+first.
 
 Provides abstraction to the configuration information obtainable from a 
 Layer2 device through SNMP.  Information is stored in a number of MIBs.
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $l2 = new SNMP::Info::Layer2(...);
 
@@ -243,9 +222,7 @@ a more specific class using the method above.
 
 =item SNMP::Info::Bridge
 
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
+=item SNMP::Info::Entity
 
 =back
 
@@ -253,21 +230,13 @@ a more specific class using the method above.
 
 =over
 
-=item CISCO-PRODUCTS-MIB 
-
-Needed for ID of Cisco Products
-
-=item CISCO-STACK-MIB
-
-Needed for ID of Cisco Products
-
 =item Inherited Classes
 
 MIBs required by the inherited classes listed above.
 
 =back
 
-MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+MIBs can be found in netdisco-mibs package.
 
 =head1 GLOBALS
 
@@ -282,31 +251,31 @@ These are methods that return scalar value from SNMP
 Cross references $l2->id() with product IDs in the 
 Cisco MIBs.
 
-For HP devices, removes 'hpswitch' from the name
+For HP devices, removes C<'hpswitch'> from the name
 
-For Cisco devices, removes 'sysid' from the name
+For Cisco devices, removes c<'sysid'> from the name
 
 =item $l2->vendor()
 
-Trys to discover the vendor from $l2->model() and $l2->description()
+Tries to discover the vendor from $l2->model() and $l2->description()
+
+=item $l2->serial()
+
+Returns serial number if available through SNMP
 
 =back
 
 =head2 Globals imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::Bridge
 
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::Bridge/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Globals imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::CDP for details.
-
-=head2 Globals imported from SNMP::Info::CiscoStats
-
-See documentation in SNMP::Info::CiscoStats for details.
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
 
 =head1 TABLE METHODS
 
@@ -319,32 +288,29 @@ to a hash.
 
 =item $l2->interfaces()
 
-Creates a map between the interface identifier (iid) and the physical port name.
+Creates a map between the interface identifier (iid) and the physical port
+name.
 
-Defaults to B<ifDescr> but checks and overrides with B<ifName>
+Defaults to C<ifDescr> but checks and overrides with C<ifName>
 
 =item $l2->i_ignore()
 
 Returns reference to hash.  Increments value of IID if port is to be ignored.
 
-Ignores ports with B<ifType> of loopback,propvirtual,other, and cpu
+Ignores ports with C<ifType> of loopback, propvirtual, other, and cpu
 
 =back
 
 =head2 Table Methods imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::Bridge
 
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::CDP
+=head2 Table Methods imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::CDP for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in SNMP::Info::CiscoStats for details.
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/Airespace.pm

@@ -0,0 +1,385 @@
+# SNMP::Info::Layer2::Airespace
+#
+# Copyright (c) 2008 Eric Miller
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::Airespace;
+
+use strict;
+use Exporter;
+use SNMP::Info::Bridge;
+use SNMP::Info::CDP;
+use SNMP::Info::Airespace;
+
+@SNMP::Info::Layer2::Airespace::ISA
+    = qw/SNMP::Info::Airespace SNMP::Info::CDP SNMP::Info::Bridge Exporter/;
+@SNMP::Info::Layer2::Airespace::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::MIBS,      %SNMP::Info::Bridge::MIBS,
+    %SNMP::Info::CDP::MIBS, %SNMP::Info::Airespace::MIBS,
+    'CISCO-LWAPP-DOT11-CLIENT-MIB' => 'cldcClientCurrentTxRateSet',
+    'CISCO-LWAPP-DOT11-MIB'        => 'cldHtDot11nChannelBandwidth',
+    'CISCO-LWAPP-AP-MIB'           => 'cLApIfMacAddress',
+);
+
+%GLOBALS = (
+    %SNMP::Info::GLOBALS,      %SNMP::Info::Bridge::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS, %SNMP::Info::Airespace::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::FUNCS,      %SNMP::Info::Bridge::FUNCS,
+    %SNMP::Info::CDP::FUNCS, %SNMP::Info::Airespace::FUNCS,
+    # CISCO-LWAPP-AP-MIB::cLApTable
+    'ap_if_mac'        => 'cLApIfMacAddress',
+    # CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientTable
+    'client_txrate'    => 'cldcClientCurrentTxRateSet',
+    'cd11_proto'       => 'cldcClientProtocol',
+    'cd11_rateset'     => 'cldcClientDataRateSet',
+    # CISCO-LWAPP-DOT11-MIB::cldHtMacOperationsTable
+    'cd11n_ch_bw'      => 'cldHtDot11nChannelBandwidth',
+
+);
+
+%MUNGE = (
+    %SNMP::Info::MUNGE,      %SNMP::Info::Bridge::MUNGE,
+    %SNMP::Info::CDP::MUNGE, %SNMP::Info::Airespace::MUNGE,
+    'ap_if_mac'         => \&SNMP::Info::munge_mac,
+    'cd11n_ch_bw'       => \&munge_cd11n_ch_bw,
+    'cd11_rateset'      => \&munge_cd11_rateset,
+    'cd11_proto'        => \&munge_cd11_proto,
+);
+
+# 802.11n Modulation and Coding Scheme (MCS)
+my $mcs_index = {
+    20 => {
+	m0  => '6.5',
+	m1  => '13',
+	m2  => '19.5',
+	m3  => '26',
+	m4  => '39',
+	m5  => '52',
+	m6  => '58.5',
+	m7  => '65',
+	m8  => '13',
+	m9  => '26',
+	m10 => '39',
+	m11 => '52',
+	m12 => '78',
+	m13 => '104',
+	m14 => '117',
+	m15 => '130',
+	# This is a cheat for 802.11a bonded
+	m108 => '108',
+    },
+    40 => {
+	m0  => '15',
+	m1  => '30',
+	m2  => '45',
+	m3  => '60',
+	m4  => '90',
+	m5  => '120',
+	m6  => '135',
+	m7  => '157.5',
+	m8  => '30',
+	m9  => '60',
+	m10 => '90',
+	m11 => '120',
+	m12 => '180',
+	m13 => '240',
+	m14 => '270',
+	m15 => '300',
+    }
+};
+
+sub os {
+    return 'cisco';
+}
+
+sub vendor {
+    return 'cisco';
+}
+
+sub model {
+    my $airespace = shift;
+    my $model     = $airespace->airespace_model();
+    return unless defined $model;
+
+    return $model;
+}
+
+sub cd11_mac {
+    my $airespace = shift;
+    my $cd11_sigstrength = $airespace->cd11_sigstrength();
+
+    my $ret = {};
+    foreach my $idx ( keys %$cd11_sigstrength ) {
+	my $mac = join( ":", map { sprintf "%02x", $_ } split /\./, $idx );
+	$ret->{$idx} = $mac
+    }
+    return $ret;
+}
+
+sub cd11_txrate {
+    my $airespace = shift;
+    
+    my $rates  = $airespace->client_txrate() || {};
+    my $protos = $airespace->cd11_proto()    || {};
+    my $bws    = $airespace->cd11n_ch_bw()   || {};
+    
+    my $cd11_txrate = {};
+    foreach my $idx ( keys %$rates ) {
+	my $rate = $rates->{$idx} || '0.0';
+	
+	if ( $rate =~ /^\d+/ ) {
+            $cd11_txrate->{$idx} = [ $rate * 1.0 ];
+	}
+	elsif ( $rate =~ /^m/ ) {
+	    my $band = $protos->{$idx};
+	    my $bw   = $bws->{$band};
+	    $cd11_txrate->{$idx} = [ $mcs_index->{$bw}->{$rate} || '0.0' ];
+	}
+	else {
+	    $cd11_txrate->{$idx} = [ $rate ];
+	}
+    }
+    return $cd11_txrate;
+}
+
+sub munge_cd11n_ch_bw {
+    my $bw = shift;
+    
+    if ( $bw =~ /forty/ ) {
+	return 40;
+    }
+    return 20;
+}
+
+sub munge_cd11_proto {
+    my $bw = shift;
+    
+    return 2 if ( $bw eq 'dot11n5' );
+
+    return 1;
+}
+
+sub munge_cd11_rateset {
+    my $rates = shift;
+    return [ map { $_ * 1.0 } split /,/, $rates ];
+}
+
+# Cisco provides the AP's Ethernet MAC via
+# CISCO-LWAPP-AP-MIB::cLApIfMacAddress this was not available pre-Cisco
+sub i_mac {
+    my $airespace = shift;
+    my $partial   = shift;
+
+    my $i_index = $airespace->i_index($partial)  || {};
+    my $ap_mac  = $airespace->ap_if_mac()        || {};
+
+    my $i_mac = $airespace->SUPER::i_mac() || {};
+    foreach my $iid ( keys %$i_index ) {
+	my $index = $i_index->{$iid};
+	next unless defined $index;
+
+	if ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+	    $index =~ s/\.\d+$//;
+	    next unless defined $index;
+	    my $sys_mac = join( '.', map { hex($_) } split( ':', $index ) );
+	    my $mac = $ap_mac->{$sys_mac};
+	    $i_mac->{$iid} = $mac;
+	}
+    }
+    return $i_mac;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::Airespace - SNMP Interface to Cisco (Airespace) Wireless
+Controllers
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+    #Let SNMP::Info determine the correct subclass for you.
+
+    my $airespace = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $airespace->class();
+    print " Using device sub class : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from 
+Cisco (Airespace) Wireless Controllers through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $airespace = new SNMP::Info::Layer2::Airespace(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Airespace
+
+=item SNMP::Info::CDP
+
+=item SNMP::Info::Bridge
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-LWAPP-DOT11-CLIENT-MIB>
+
+=item F<CISCO-LWAPP-DOT11-MIB>
+
+=item F<CISCO-LWAPP-AP-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Airespace/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Bridge/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $airespace->vendor()
+
+Returns 'cisco'
+
+=item $airespace->os()
+
+Returns 'cisco'
+
+=item $airespace->model()
+
+(C<agentInventoryMachineModel>)
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Airespace
+
+See documentation in L<SNMP::Info::Airespace/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Bridge
+
+See documentation in L<SNMP::Info::Bridge/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over 
+
+=item cd11_mac()
+
+Returns client radio interface MAC addresses.
+
+=item cd11_txrate()
+
+Returns client transmission speed in Mbs.
+
+=back 
+
+=head2 Overrides
+
+=over
+
+=item i_mac()
+
+Adds AP Ethernet MAC as port mac on radio ports from C<CISCO-LWAPP-AP-MIB>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Airespace
+
+See documentation in L<SNMP::Info::Airespace/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Bridge
+
+See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item munge_cd11n_ch_bw()
+
+Converts 802.11n channel bandwidth to either 20 or 40.
+
+=item munge_cd11_proto()
+
+Converts 802.11n 2.4Ghz to 1 and 5Ghz to 2 to correspond to the
+(C<cldHtMacOperationsTable>) index.
+
+=item munge_cd11_rateset()
+
+Converts rate set to array.
+
+=back
+
+=cut

Info/Layer2/Aironet.pm

@@ -1,89 +1,132 @@
 # SNMP::Info::Layer2::Aironet
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008-2009 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Aironet;
-$VERSION = 0.9;
-# $Id$
-use strict;
 
+use strict;
 use Exporter;
 use SNMP::Info::Layer2;
 use SNMP::Info::Entity;
 use SNMP::Info::EtherLike;
-use SNMP::Info::CiscoVTP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CDP;
+use SNMP::Info::IEEE802dot11;
 
-@SNMP::Info::Layer2::Aironet::ISA = qw/SNMP::Info::Layer2 SNMP::Info::Entity SNMP::Info::EtherLike 
-                                       SNMP::Info::CiscoVTP Exporter/;
+@SNMP::Info::Layer2::Aironet::ISA
+    = qw/SNMP::Info::Layer2 SNMP::Info::Entity SNMP::Info::EtherLike
+    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig SNMP::Info::CDP Exporter/;
 @SNMP::Info::Layer2::Aironet::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
 
-# Set for No CDP
 %GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS,
-            %SNMP::Info::Entity::GLOBALS,
-            %SNMP::Info::EtherLike::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-            'serial' => 'entPhysicalSerialNum.1',
-            'descr'  => 'sysDescr'
-            );
+    %SNMP::Info::IEEE802dot11::GLOBALS,
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+    %SNMP::Info::EtherLike::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    'serial' => 'entPhysicalSerialNum.1',
+    'descr'  => 'sysDescr'
+);
 
-%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
-            %SNMP::Info::Entity::FUNCS,
-            %SNMP::Info::EtherLike::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-            );
+%FUNCS = (
+    %SNMP::Info::IEEE802dot11::FUNCS,
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::Entity::FUNCS,
+    %SNMP::Info::EtherLike::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    'i_80211channel'   => 'cd11IfPhyDsssCurrentChannel',
+    'c_dot11subif'     => 'cDot11ClientSubIfIndex',
+    'cd11_rateset'     => 'cDot11ClientDataRateSet',
+    'cd11_txrate'      => 'cDot11ClientCurrentTxRateSet',
+    'cd11_uptime'      => 'cDot11ClientUpTime',
+    'cd11_sigstrength' => 'cDot11ClientSignalStrength',
+    'cd11_sigqual'     => 'cDot11ClientSigQuality',
+    'cd11_rxpkt'       => 'cDot11ClientPacketsReceived',
+    'cd11_txpkt'       => 'cDot11ClientPacketsSent',
+    'cd11_rxbyte'      => 'cDot11ClientBytesReceived',
+    'cd11_txbyte'      => 'cDot11ClientBytesSent',
+    'mbss_mac_addr'    => 'cdot11MbssidIfMacAddress',
+);
 
-%MIBS    = (
-            %SNMP::Info::Layer2::MIBS,
-            %SNMP::Info::Entity::MIBS,
-            %SNMP::Info::EtherLike::MIBS,
-            %SNMP::Info::CiscoVTP::MIBS,
-            );
+%MIBS = (
+    %SNMP::Info::IEEE802dot11::MIBS,
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::Entity::MIBS,
+    %SNMP::Info::EtherLike::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    'CISCO-DOT11-IF-MIB'                  => 'cd11IfAuxSsid',
+    'CISCO-DOT11-ASSOCIATION-MIB'         => 'cDot11ClientSubIfIndex',
+    'CISCO-DOT11-SSID-SECURITY-MIB'       => 'cdot11SecVlanNameId',
+    'CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB' => 'cviRoutedVlanIfIndex',
+);
 
-%MUNGE   = (%SNMP::Info::Layer2::MUNGE,
-            %SNMP::Info::Entity::MUNGE,
-            %SNMP::Info::EtherLike::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-            );
+%MUNGE = (
+    %SNMP::Info::IEEE802dot11::MUNGE,
+    %SNMP::Info::Layer2::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+    %SNMP::Info::EtherLike::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+    'cd11_txrate'   => \&munge_cd11_txrate,
+    'cd11_rateset'  => \&munge_cd11_txrate,
+    'mbss_mac_addr' => \&SNMP::Info::munge_mac,
+);
 
+# Use 802.11 power level without putting IEEE802dot11 in @ISA
+*SNMP::Info::Layer2::Aironet::dot11_cur_tx_pwr_mw
+    = \&SNMP::Info::IEEE802dot11::dot11_cur_tx_pwr_mw;
 
 sub vendor {
+
     # Sorry, but it's true.
     return 'cisco';
 }
 
 sub interfaces {
     my $aironet = shift;
-    my $i_description = $aironet->i_description();
+    my $partial = shift;
+
+    my $i_description = $aironet->i_description($partial);
 
     return $i_description;
 }
@@ -91,7 +134,7 @@ sub interfaces {
 # Tag on e_descr.1
 sub description {
     my $aironet = shift;
-    my $descr = $aironet->descr();
+    my $descr   = $aironet->descr();
     my $e_descr = $aironet->e_descr();
 
     $descr = "$e_descr->{1}  $descr" if defined $e_descr->{1};
@@ -102,10 +145,12 @@ sub description {
 # Fetch duplex from EtherLike
 sub i_duplex {
     my $aironet = shift;
-    my $el_duplex = $aironet->el_duplex();
+    my $partial = shift;
+
+    my $el_duplex = $aironet->el_duplex($partial);
 
     my %i_duplex;
-    foreach my $d (keys %$el_duplex){
+    foreach my $d ( keys %$el_duplex ) {
         my $val = $el_duplex->{$d};
         next unless defined $val;
         $i_duplex{$d} = 'full' if $val =~ /full/i;
@@ -115,16 +160,314 @@ sub i_duplex {
     return \%i_duplex;
 }
 
+#
+# IOS 12.3 introduces the cDot11ClientSubIfIndex in the
+# cDot11ClientConfigInfoTable, which supplies the ifIndex
+# of the VLAN Subinterface if one exists, or of the primary
+# interface if there are not subinterfaces.  12.2 used the
+# Q-BRIDGE-MIB dot1qTpFdbTable but that was removed in 12.3.
+sub _aironet_special {
+    my $aironet = shift;
+    my $os_ver  = $aironet->os_ver();
+    if (   defined($os_ver)
+        && $os_ver =~ /^(\d+)\.(\d+)(\D|$)/
+        && ( ( $1 == 12 && $2 >= 3 ) || $1 > 12 ) )
+    {
+        return 1;
+    }
+}
+
+#
+# INDEX      { ifIndex, cd11IfAuxSsid, cDot11ClientAddress }
+sub _aironet_breakout_dot11idx {
+    my $oid = shift;
+
+    my @parts   = split( /\./, $oid );
+    my $ifindex = shift(@parts);
+    my $ssidlen = shift(@parts);
+    my $ssid    = pack( "C*", splice( @parts, 0, $ssidlen ) );
+    my $mac     = join( ":", map { sprintf "%02x", $_ } @parts );
+    return ( $ifindex, $ssid, $mac );
+}
+
+sub fw_mac {
+    my $aironet = shift;
+
+    return $aironet->qb_fw_mac() unless _aironet_special($aironet);
+    my $c_dot11subif = $aironet->c_dot11subif();
+    my $fw_mac       = {};
+
+    foreach my $i ( keys %$c_dot11subif ) {
+        my ( $ifindex, $ssid, $mac ) = _aironet_breakout_dot11idx($i);
+        $fw_mac->{$i} = $mac;
+    }
+    return $fw_mac;
+}
+
+sub fw_port {
+    my $aironet = shift;
+
+    return $aironet->qb_fw_port() unless _aironet_special($aironet);
+    my $c_dot11subif = $aironet->c_dot11subif();
+    my $fw_port      = {};
+
+    foreach my $i ( keys %$c_dot11subif ) {
+        my ( $ifindex, $ssid, $mac ) = _aironet_breakout_dot11idx($i);
+        $fw_port->{$i} = $c_dot11subif->{$i} || $ifindex;
+    }
+    return $fw_port;
+}
+
+sub bp_index {
+    my $aironet = shift;
+
+    return $aironet->orig_bp_index() unless _aironet_special($aironet);
+    my $c_dot11subif = $aironet->c_dot11subif();
+    my $bp_index     = {};
+
+    foreach my $i ( keys %$c_dot11subif ) {
+        my ( $ifindex, $ssid, $mac ) = _aironet_breakout_dot11idx($i);
+        my ($i) = $c_dot11subif->{$i} || $ifindex;
+        $bp_index->{$i} = $i;
+    }
+    return $bp_index;
+}
+
+###
+#
+# VLAN support
+#
+sub v_name {
+    my $aironet = shift;
+
+    my $v_name      = {};
+    my $vlan_nameid = $aironet->cdot11SecVlanNameId();
+    foreach my $i ( keys %$vlan_nameid ) {
+        my @parts = split( /\./, $i );
+        my $namelen = shift(@parts);
+
+        my $name = pack( "C*", @parts );
+        $v_name->{$i} = $name;
+    }
+    return $v_name;
+}
+
+sub v_index {
+    my $aironet = shift;
+
+    return $aironet->cdot11SecVlanNameId();
+}
+
+sub i_vlan {
+    my $aironet = shift;
+
+    my $i_vlan = {};
+    my $idxmap = $aironet->cviRoutedVlanIfIndex();
+    foreach my $i ( keys %$idxmap ) {
+        my @parts = split( /\./, $i );
+        $i_vlan->{ $idxmap->{$i} } = $parts[0];
+    }
+    return $i_vlan;
+}
+
+# The MIB reports in units of half a megabit, e.g.,
+# 5.5Mbps is reported as 11.
+sub munge_cd11_txrate {
+    my $txrates = shift;
+    my @units   = unpack( "C*", $txrates );
+    my @rates   = map {
+        my $unit = $_;
+        $unit *= 0.5;
+    } @units;
+
+    return \@rates;
+}
+
+# cd11 INDEX
+sub cd11_port {
+    my $aironet          = shift;
+    my $cd11_sigstrength = $aironet->cd11_sigstrength();
+    my $interfaces       = $aironet->interfaces();
+    my %ret;
+    foreach ( keys %$cd11_sigstrength ) {
+        my ( $ifindex, $ssid, $mac ) = _aironet_breakout_dot11idx($_);
+        $ret{$_} = $interfaces->{$ifindex};
+    }
+    return \%ret;
+}
+
+sub cd11_ssid {
+    my $aironet          = shift;
+    my $cd11_sigstrength = $aironet->cd11_sigstrength();
+    my %ret;
+    foreach ( keys %$cd11_sigstrength ) {
+        my ( $ifindex, $ssid, $mac ) = _aironet_breakout_dot11idx($_);
+        $ret{$_} = $ssid;
+    }
+    return \%ret;
+}
+
+sub cd11_mac {
+    my $aironet          = shift;
+    my $cd11_sigstrength = $aironet->cd11_sigstrength();
+    my %ret;
+    foreach ( keys %$cd11_sigstrength ) {
+        my ( $ifindex, $ssid, $mac ) = _aironet_breakout_dot11idx($_);
+        $ret{$_} = $mac;
+    }
+    return \%ret;
+}
+
+# Map VLAN N on interface I to its actual ifIndex.
+sub _vlan_map_n_stack {
+    my $aironet  = shift;
+    my $vlan_idx = $aironet->cviRoutedVlanIfIndex();
+
+    my $vlan_map = {};
+    foreach my $idx ( keys %$vlan_idx ) {
+        my ( $vlan, $num ) = split( /\./, $idx );
+        $vlan_map->{$vlan}->{$num} = $vlan_idx->{$idx};
+    }
+    return $vlan_map;
+}
+
+# When using MBSS, the ifTable reports the
+# base MAC address, but the actual association is
+# with a different MAC address for MBSS.
+# This convoluted path seems to be necessary
+# to get the right overrides.
+sub i_mac {
+    my $aironet = shift;
+
+    # no partial is possible due to the levels
+    # of indirection.
+
+    # Start with the ifPhysAddress, and override
+    my $mbss_mac = $aironet->orig_i_mac();
+
+    my $mbss_mac_addr = $aironet->mbss_mac_addr();
+    my $ssid_vlan     = $aironet->cdot11SecAuxSsidVlan();
+    my $vlan_map      = $aironet->cviRoutedVlanIfIndex();
+    my $ifstack       = $aironet->ifStackStatus();
+
+    my $vlan_list = {};
+    foreach my $idx ( keys %$vlan_map ) {
+        my ( $vlan, $num ) = split( /\./, $idx );
+        push( @{ $vlan_list->{$vlan} }, $vlan_map->{$idx} );
+    }
+
+    my $stack = {};
+    foreach my $idx ( keys %$ifstack ) {
+        my ( $upper, $lower ) = split( /\./, $idx );
+        $stack->{$upper}->{$lower} = $ifstack->{$idx};
+    }
+
+    # mbss_mac_addr index is (radio, ssid).
+    # ssid_vlan maps ssid->vlan.
+    # vlan_map maps vlan->[list of interfaces]
+    # ifstack allows us to pick the right interface
+    foreach my $idx ( keys %$mbss_mac_addr ) {
+        my ( $interface, @ssid ) = split( /\./, $idx );
+        my $vlan = $ssid_vlan->{ join( ".", scalar(@ssid), @ssid ) };
+        next unless defined($vlan);
+        foreach my $vlanif ( @{ $vlan_list->{$vlan} } ) {
+            if ( defined( $stack->{$vlanif}->{$interface} ) ) {
+                $mbss_mac->{$vlanif} = $mbss_mac_addr->{$idx};
+            }
+        }
+    }
+
+    return $mbss_mac;
+}
+
+sub i_ssidlist {
+    my $aironet = shift;
+
+    # no partial is possible due to the levels
+    # of indirection.
+    my $ssid_row  = $aironet->cdot11SecInterfSsidRowStatus();
+    my $ssid_vlan = $aironet->cdot11SecAuxSsidVlan();
+    if ( !defined($ssid_row) || !defined($ssid_vlan) ) {
+        return $aironet->cd11IfAuxSsid();
+    }
+    my $ssidlist     = {};
+    my $if_ssidcount = {};
+    my $vlan_map     = $aironet->_vlan_map_n_stack();
+    foreach my $idx ( keys %$ssid_row ) {
+        next unless $ssid_row->{$idx} eq 'active';
+
+        # ssid_row index is radio.ssid
+        my ( $interface, $ssid ) = split( /\./, $idx, 2 );
+        my ( $len, @ssidt ) = split( /\./, $ssid );
+        my $mappedintf = $vlan_map->{ $ssid_vlan->{$ssid} }->{$interface};
+        next unless $mappedintf;
+        if ( !$if_ssidcount->{$mappedintf} ) {
+            $if_ssidcount->{$mappedintf} = 1;
+        }
+        my $ssidlist_idx
+            = sprintf( "%s.%d", $mappedintf, $if_ssidcount->{$mappedintf} );
+        $ssidlist->{$ssidlist_idx} = pack( "C*", @ssidt );
+        $if_ssidcount->{$mappedintf}++;
+    }
+    return $ssidlist;
+}
+
+sub i_ssidbcast {
+    my $aironet    = shift;
+    my $partial    = shift;
+    my $mbss_bcast = $aironet->cdot11SecAuxSsidMbssidBroadcast();
+    if ( !defined($mbss_bcast) ) {
+        return $aironet->cd11IfAuxSsidBroadcastSsid($partial);
+    }
+    my $map = {};
+    foreach my $key ( keys %$mbss_bcast ) {
+        my (@idx) = split( /\./, $key );
+        my $len = shift(@idx);
+        $map->{ pack( "C*", @idx ) } = $mbss_bcast->{$key};
+    }
+
+    # This needs to return the same indexes as i_ssidlist.
+    # mbss_bcast maps ssid -> broadcasting
+    #  so we just replace the i_ssidlist values with the mbss_bcast ones.
+    my $i_ssidlist  = $aironet->i_ssidlist();
+    my $i_ssidbcast = {};
+    foreach my $key ( keys %$i_ssidlist ) {
+        $i_ssidbcast->{$key} = $map->{ $i_ssidlist->{$key} };
+    }
+    return $i_ssidbcast;
+}
+
+sub i_ssidmac {
+    my $aironet    = shift;
+    my $partial    = shift;
+    my $mbss_mac_addr = $aironet->mbss_mac_addr();
+
+    # Same logic as i_ssidbcast to return same indexes as i_ssidlist 
+    my $map = {};
+    foreach my $key ( keys %$mbss_mac_addr ) {
+        my ( $interface, @idx ) = split( /\./, $key );
+        $map->{ pack( "C*", @idx ) } = $mbss_mac_addr->{$key};
+    }
+
+    my $i_ssidlist  = $aironet->i_ssidlist();
+    my $i_ssidmac = {};
+    foreach my $key ( keys %$i_ssidlist ) {
+        $i_ssidmac->{$key} = $map->{ $i_ssidlist->{$key} };
+    }
+    return $i_ssidmac;
+}
+
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Aironet - SNMP Interface to Cisco Aironet devices running IOS.
+SNMP::Info::Layer2::Aironet - SNMP Interface to Cisco Aironet devices running
+IOS.
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -132,7 +475,6 @@ Max Baker (C<max@warped.org>)
  my $aironet = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -144,7 +486,8 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-Provides interface to SNMP Data available on newer Aironet devices running Cisco IOS.
+Provides interface to SNMP Data available on newer Aironet devices running
+Cisco IOS.
 
 Note there are two classes for Aironet devices :
 
@@ -160,8 +503,8 @@ This class is for devices running Cisco IOS software (newer)
 
 =back
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
 my $aironet = new SNMP::Info::Layer2::Aironet(...);
 
@@ -175,7 +518,9 @@ my $aironet = new SNMP::Info::Layer2::Aironet(...);
 
 =item SNMP::Info::EtherLike
 
-=item SNMP::Info::CiscoVTP
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoConfig
 
 =back
 
@@ -201,23 +546,47 @@ Adds info from method e_descr() from SNMP::Info::Entity
 
 =item $aironet->vendor()
 
-    Returns 'cisco' :)
+Returns 'cisco'
+
+=item $aironet->description()
+
+System description
 
 =back
 
 =head2 Globals imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::Entity for details.
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::EtherLike
 
-See documentation in SNMP::Info::EtherLike for details.
+See documentation in L<SNMP::Info::EtherLike/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
+
+=over
+
+=item $aironet->cd11_port()
+
+Returns radio interfaces.
+
+=item $aironet->cd11_mac()
+
+Returns client radio interface MAC addresses.
+
+=item $aironet->cd11_ssid()
+
+Returns radio interface ssid.
+
+=item $aironet->dot11_cur_tx_pwr_mw()
+
+Current transmit power, in milliwatts, of the radio interface.
+
+=back
 
 =head2 Overrides
 
@@ -227,22 +596,80 @@ See documentation in SNMP::Info::EtherLike for details.
 
 Uses the i_description() field.
 
+=item $aironet->i_mac()
+
+MAC address of the interface. Note this is just the MAC of the port, not
+anything connected to it.
+
 =item $aironet->i_duplex()
 
-Crosses information from SNMP::Info::EtherLike to get duplex info for interfaces.
+Crosses information from SNMP::Info::EtherLike to get duplex info for
+interfaces.
+
+=item $aironet->bp_index()
+
+Returns reference to hash of bridge port table entries map back to interface
+identifier (iid)
+
+=item $aironet->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses
+
+=item $aironet->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+=item $aironet->i_vlan()
+
+Returns a mapping between C<ifIndex> and the PVID or default VLAN.
+
+=item $aironet->v_index()
+
+Returns VLAN IDs
+
+=item $aironet->v_name()
+
+Returns VLAN names
+
+=item $aironet->i_ssidlist()
+
+Returns a list of SSIDs associated with interfaces.  This function
+is C<MBSSID> aware, so when using C<MBSSID> can map SSIDs to the sub-interface
+to which they belong.
+
+=item $aironet->i_ssidbcast()
+
+With the same keys as i_ssidlist, returns whether the given SSID is
+being broadcast.
+
+=item $aironet->i_ssidmac()
+
+With the same keys as i_ssidlist, returns the Basic service set
+identification (BSSID), MAC address, the AP is using for the SSID. 
 
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::Entity for details.
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::EtherLike
 
-See documentation in SNMP::Info::EtherLike for details.
+See documentation in L<SNMP::Info::EtherLike/"TABLE METHODS"> for details.
+
+=head1 Data Munging Callback Subroutines
+
+=over
+
+=item $aironet->munge_cd11_txrate()
+
+Converts units of half a megabit to human readable string.
+
+=back
 
 =cut

Info/Layer2/Allied.pm

@@ -1,65 +1,62 @@
 # SNMP::Info::Layer2::Allied
-# Max Baker <max@warped.org>, Dmitry Sergienko <dmitry@trifle.net>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker
+# Copyright (c) 2008 Max Baker
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of Netdisco nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Allied;
-$VERSION = 0.9;
-# $Id$
-use strict;
 
+use strict;
 use Exporter;
 use SNMP::Info::Layer2;
 use SNMP::Info::Layer1;
 
-@SNMP::Info::Layer2::Allied::ISA = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Allied::ISA       = qw/SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::Allied::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-%GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS
-           );
+$VERSION = '3.03';
 
-%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
-            'ip_adresses'=> 'atNetAddress',
-            'ip_mac'     => 'atPhysAddress',
-            'i_name'     => 'ifName',
-            'i_up2'	     => 'ifOperStatus',
-           );
+%GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );
 
-%MIBS    = (
-            %SNMP::Info::Layer2::MIBS,
-            'AtiSwitch-MIB'    => 'atiswitchProductType',
-            'AtiStackInfo-MIB' => 'atiswitchEnhancedStacking',
-           );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    'ip_adresses' => 'atNetAddress',
+    'ip_mac'      => 'atPhysAddress',
+);
 
-%MUNGE   = (%SNMP::Info::Layer2::MUNGE,
-           );
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    'AtiSwitch-MIB'    => 'atiswitchProductType',
+    'AtiStackInfo-MIB' => 'atiswitchEnhancedStacking',
+);
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, );
 
 sub vendor {
     return 'allied';
@@ -71,9 +68,9 @@ sub os {
 
 sub os_ver {
     my $allied = shift;
-    my $descr = $allied->description();
-    
-    if ($descr =~ m/version (\d+\.\d+)/){
+    my $descr  = $allied->description();
+
+    if ( $descr =~ m/version (\d+\.\d+)/ ) {
         return $1;
     }
 }
@@ -83,50 +80,48 @@ sub model {
 
     my $desc = $allied->description();
 
-    if ($desc =~ /(AT-80\d{2}\S*)/){
+    if ( $desc =~ /(AT-80\d{2}\S*)/ ) {
         return $1;
     }
-    return undef;
+    return;
 }
 
-sub ip {
-    my $allied = shift;
+sub root_ip {
+    my $allied  = shift;
     my $ip_hash = $allied->ip_addresses();
-    my $ip;
     my $found_ip;
-    
-    foreach $ip (values %{$ip_hash}) {
-        my $found_ip = SNMP::Info::munge_ip($ip) if (defined $ip);
-        last; # this is only one IP address
+
+    foreach my $ip ( values %{$ip_hash} ) {
+        $found_ip = SNMP::Info::munge_ip($ip) if ( defined $ip );
+        last;    # this is only one IP address
     }
     return $found_ip;
 }
 
-sub mac{
-    my $allied = shift;
+sub mac {
+    my $allied   = shift;
     my $mac_hash = $allied->ip_mac();
-    my $mac;
     my $found_mac;
-    
-    foreach $mac (values %{$mac_hash}) {
+
+    foreach my $mac ( values %{$mac_hash} ) {
         $found_mac = SNMP::Info::munge_mac($mac);
-        last; # this is only one MAC address
+        last;    # this is only one MAC address
     }
     return $found_mac;
 }
 
 sub i_up {
-    my $allied = shift;
+    my $allied  = shift;
+    my $partial = shift;
 
-    my $i_up  = SNMP::Info::Layer1::i_up($allied);
-    my $i_up2 = $allied->i_up2();
+    my $i_up = SNMP::Info::Layer1::i_up( $allied, $partial );
 
-    foreach my $port (keys %$ati_up){
-        my $up = $ati_up->{$port};
+    foreach my $port ( keys %$i_up ) {
+        my $up = $i_up->{$port};
         $i_up->{$port} = 'down' if $up eq 'linktesterror';
-        $i_up->{$port} = 'up' if $up eq 'nolinktesterror';
+        $i_up->{$port} = 'up'   if $up eq 'nolinktesterror';
     }
-    
+
     return $i_up;
 }
 1;
@@ -134,11 +129,11 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Allied - SNMP Interface to Allied Telesyn switches
+SNMP::Info::Layer2::Allied - SNMP Interface to Allied Telesis switches
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker, Dmitry Sergienko <dmitry@trifle.net>
 
 =head1 SYNOPSIS
 
@@ -146,14 +141,13 @@ Max Baker (C<max@warped.org>)
  my $allied = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myhub',
                           Community   => 'public',
                           Version     => 1
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $l1->class();
+ my $class = $allied->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
@@ -166,7 +160,7 @@ inherited methods.
 
 =over
 
-=item SNMP::Info::Layer1
+=item SNMP::Info::Layer2
 
 =back
 
@@ -174,16 +168,18 @@ inherited methods.
 
 =over
 
-=item ATI-MIB 
+=item F<AtiSwitch-MIB>
 
-Download for your device from http://www.allied-telesyn.com/allied/support/
+=item F<AtiStackInfo-MIB>
 
-=item Inherited Classes
-
-MIBs listed in SNMP::Info::Layer1 and its inherited classes.
+Download for your device from ftp://ftp.allied-telesyn.com/pub/switches/mibs/
 
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -206,30 +202,30 @@ Culls Version from description()
 
 =item $allied->root_ip()
 
-Returns IP Address of Managed Hub.
+Returns IP Address of Managed Device.
 
-(B<actualIpAddr>)
+(C<actualIpAddr>)
 
 =item $allied->model()
 
-Trys to cull out AT-nnnnX out of the description field.
+Tries to cull out C<AT-nnnnX> out of the description field.
+
+=item $allied->mac()
+
+Returns device MAC. 
 
 =back
 
-=head2 Global Methods imported from SNMP::Info::Layer1
+=head2 Globals imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer1 for details.
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 =head2 Overrides
 
 =over
 
-=item $allied->i_name()
-
-Returns reference to map of IIDs to human-set port name.
-
 =item $allied->i_up()
 
 Returns reference to map of IIDs to link status.  Changes
@@ -237,10 +233,8 @@ the values of ati_up() to 'up' and 'down'.
 
 =back
 
-=head2 Allied MIB
+=head2 Table Methods imported from SNMP::Info::Layer2
 
-=over
-
-=back
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/Bay.pm

@@ -1,474 +0,0 @@
-# SNMP::Info::Layer2::Bay
-# Max Baker <max@warped.org>
-# This module depricated.  See Layer2::BayStack
-#
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
-#
-# Copyright (c) 2002,2003 Regents of the University of California
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
-# modification, are permitted provided that the following conditions are met:
-# 
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
-#       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-package SNMP::Info::Layer2::Bay;
-$VERSION = 0.9;
-# $Id$
-use strict;
-
-use Exporter;
-use SNMP::Info::Layer2;
-
-@SNMP::Info::Layer2::Bay::ISA = qw/SNMP::Info::Layer2 Exporter/;
-@SNMP::Info::Layer2::Bay::EXPORT_OK = qw//;
-
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
-
-# Set for No CDP
-%GLOBALS = ( %SNMP::Info::Layer2::GLOBALS,
-             'cdp_id'  => 's5EnMsTopIpAddr',
-             'cdp_run' => 's5EnMsTopStatus',
-           );
-
-%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
-            'imac2'      => 'ifPhysAddress',
-            # S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmTable
-            'bay_topo_slot'     => 's5EnMsTopNmmSlot',
-            'bay_topo_port'     => 's5EnMsTopNmmPort',
-            'bay_topo_ip'       => 's5EnMsTopNmmIpAddr',
-            'bay_topo_seg'      => 's5EnMsTopNmmSegId',
-            'bay_topo_mac'      => 's5EnMsTopNmmMacAddr',
-            'bay_topo_platform' => 's5EnMsTopNmmChassisType',
-            'bay_topo_localseg' => 's5EnMsTopNmmLocalSeg',
-            );
-
-%MIBS    = (
-            %SNMP::Info::Layer2::MIBS,
-            'SYNOPTICS-ROOT-MIB'           => 'synoptics',
-            'S5-ETH-MULTISEG-TOPOLOGY-MIB' => 's5EnMsTop'
-           );
-
-delete $MIBS{'CISCO-CDP-MIB'};
-# 450's report full duplex as speed = 20mbps?!
-$SNMP::Info::SPEED_MAP{20_000_000} = '10 Mbps';
-$SNMP::Info::SPEED_MAP{200_000_000} = '100 Mbps';
-
-%MUNGE   = (%SNMP::Info::Layer2::MUNGE,
-            'i_mac2' => \&SNMP::Info::munge_mac ,
-            );
-
-sub os {
-    return 'bay';
-}
-
-sub os_ver {
-    my $bay = shift;
-    my $descr = $bay->description();
-    return undef unless defined $descr;
-
-    # 303 / 304
-    if ($descr =~ m/Rev: \d+\.\d+\.\d+\.\d+-(\d+\.\d+\.\d+\.\d+)/){
-        return $1;
-    }
-
-    # 450
-    if ($descr =~ m/SW:v(\d+\.\d+\.\d+\.\d+)/){
-        return $1;
-    }
-    return undef;
-}
-
-sub os_bin {
-    my $bay = shift;
-    my $descr = $bay->description();
-    return undef unless defined $descr;
-
-    # 303 / 304
-    if ($descr =~ m/Rev: \d+\.(\d+\.\d+\.\d+)-\d+\.\d+\.\d+\.\d+/){
-        return $1;
-    }
-
-    # 450
-    if ($descr =~ m/FW:v(\d+\.\d+\.\d+\.\d+)/){
-        return $1;
-    }
-    return undef;
-}
-
-sub vendor {
-    # or nortel, or synopsis?
-    return 'bay';
-}
-
-sub i_ignore {
-    my $bay = shift;
-    my $descr = $bay->description();
-
-    my $i_type = $bay->i_type();
-
-    my %i_ignore;
-    foreach my $if (keys %$i_type){
-        my $type = $i_type->{$if};  
-        $i_ignore{$if}++ if $type =~ /(loopback|propvirtual|cpu)/i;
-    }
-
-    return \%i_ignore;
-}
-
-sub interfaces {
-    my $bay = shift;
-    my $i_index = $bay->i_index();
-
-    return $i_index;
-}
-
-sub i_mac { 
-    my $bay = shift;
-    my $i_mac = $bay->i_mac2();
-
-    # Bay 303's with a hw rev < 2.11.4.5 report the mac as all zeros
-    foreach my $iid (keys %$i_mac){
-        my $mac = $i_mac->{$iid};
-        delete $i_mac->{$iid} if $mac eq '00:00:00:00:00:00';
-    }
-    return $i_mac;
-}
-
-
-sub model {
-    my $bay = shift;
-    my $id = $bay->id();
-    return undef unless defined $id;
-    my $model = &SNMP::translateObj($id);
-    return $id unless defined $model;
-    $model =~ s/^sreg-//i;
-
-    my $descr = $bay->description();
-
-    return '303' if ($descr =~ /\D303\D/);
-    return '304' if ($descr =~ /\D304\D/);
-    return '450' if ($model =~ /BayStack450/);
-    return $model;
-}
-
-# Hack in some CDP type stuff
-
-sub c_if {
-    my $bay = shift;
-    my $bay_topo_port = $bay->bay_topo_port();
-
-    my %c_if;
-    foreach my $entry (keys %$bay_topo_port){
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if $port == 0;
-        $c_if{"$port.1"} = $port;
-    }
-    return \%c_if;
-}
-
-sub c_ip {
-    my $bay = shift;
-    my $bay_topo_ip   = $bay->bay_topo_ip();
-    my $bay_topo_port = $bay->bay_topo_port();
-    my $ip = $bay->cdp_ip();
-    
-    # Count the number of devices seen on each port.
-    #   more than one device seen means connected to a non-bay
-    #   device, but other bay devices are squawking further away.
-    my %ip_port;
-    foreach my $entry (keys %$bay_topo_ip){
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if ($port =~ /^[\d\.]+$/ and $port == 0);
-        my $ip   = $bay_topo_ip->{$entry};
-        push(@{$ip_port{$port}},$ip);
-    }
-
-    my %c_ip;
-    foreach my $port (keys %ip_port){
-        my $ips = $ip_port{$port};
-        if (scalar @$ips == 1) {
-            $c_ip{"$port.1"} = $ips->[0];
-        } else {
-            $c_ip{"$port.1"} = $ips;
-        }
-    }
-
-    return \%c_ip;
-}
-
-sub c_port {
-    my $bay = shift;
-    my $bay_topo_port = $bay->bay_topo_port();
-    my $bay_topo_seg = $bay->bay_topo_seg();
-
-    my %c_port;
-    foreach my $entry (keys %$bay_topo_seg){
-        my $port = $bay_topo_port->{$entry};
-        next unless defined $port;
-        next if $port == 0;
-
-        # For fake remotes (multiple IPs for a c_ip), use first found
-        next if defined $c_port{"$port.1"};
-
-        my $seg  = $bay_topo_seg->{$entry};
-
-        # Segment id is (256 * remote slot_num) + (remote_port)
-        my $remote_port = $seg % 256;
-    
-        $c_port{"$port.1"} = $remote_port;
-    }
-
-    return \%c_port;
-}
-
-sub c_platform {
-    my $bay = shift;
-    my $bay_topo_port     = $bay->bay_topo_port();
-    my $bay_topo_platform = $bay->bay_topo_platform();
-
-
-    my %c_platform;
-    foreach my $entry (keys %$bay_topo_platform){
-        my $port = $bay_topo_port->{$entry} || 0;
-        next if $port == 0;
-
-        # For fake remotes (multiple IPs for a c_ip), use first found
-        next if defined $c_platform{"$port.1"};
-
-        my $platform  = $bay_topo_platform->{$entry};
-
-        $c_platform{"$port.1"} = $platform;
-    }
-
-    return \%c_platform;
-}
-
-1;
-__END__
-
-=head1 NAME
-
-SNMP::Info::Layer2::Bay - SNMP Interface to old Bay Network BayStack Switches
-
-=head1 AUTHOR
-
-Max Baker (C<max@warped.org>)
-
-=head1 SYNOPSIS
-
-This module is Depricated.  Please use Layer2::BayStack instead.
-
-=head1 DESCRIPTION
-
-Provides abstraction to the configuration information obtainable from a 
-Bay device through SNMP. 
-
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
-
- my $bay = new SNMP::Info::Layer2::Bay(...);
-
-=head2 Inherited Classes
-
-=over
-
-=item SNMP::Info::Layer2
-
-=back
-
-=head2 Required MIBs
-
-=over
-
-=item SYNOPTICS-ROOT-MIB
-
-=item S5-ETH-MULTISEG-TOPOLOGY-MIB
-
-=item Inherited classes
-
-MIBs required by SNMP::Info::Layer2 and its superclasses.
-
-=back
-
-Bay MIBs can be found on the CD that came with your product.
-
-Or, if you still have a service contract they can be downloaded at
-www.nortelnetworks.com
-
-They have also been seen at : http://www.inotech.com/mibs/vendor/baynetworks/synoptics/synoptics.asp
-
-Or http://www.oidview.com/mibs/detail.html under Synoptics.  Check also www.mibdepot.com
-
-=head1 GLOBALS
-
-These are methods that return scalar value from SNMP
-
-=over
-
-=item $bay->vendor()
-
-Returns 'bay' :)
-
-=item $bay->model()
-
-Cross references $bay->id() to the SYNOPTICS-MIB and returns
-the results.  303s and 304s have the same ID, so we have a hack
-to return depending on which it is. 
-
-Removes sreg- from the model name
-
-=item $bay->cdp_id()
-
-Returns the IP that the device is sending out for its Nmm topology info.
-
-(B<s5EnMsTopIpAddr>)
-
-=item $bay->cdp_run()
-
-Returns if the S5-ETH-MULTISEG-TOPOLOGY info is on for this device. 
-
-(B<s5EnMsTopStatus>)
-
-=back
-
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in SNMP::Info::Layer2 for details.
-
-=head1 TABLE ENTRIES
-
-These are methods that return tables of information in the form of a reference
-to a hash.
-
-=head2 Overrides
-
-=over
-
-=item $bay->interfaces()
-
-Returns reference to map of IIDs to physical ports. 
-
-Currently simply returns the B<ifIndex>
-
-=item $bay->i_ignore()
-
-Returns reference to hash of IIDs to ignore.
-
-Simply calls the SNMP::Info::Layer2::i_ignore() fn for this.
-
-=item $bay->i_mac()
-
-Returns the B<ifPhysAddress> table entries. 
-
-Removes all entries matching '00:00:00:00:00:00' -- Certain 
-older revisions of Bay 303 and 304 firmware report all zeros
-for each port mac.
-
-=back
-
-=head2 Psuedo CDP information
-
-All entries with port=0 are local and ignored.
-
-=over
-
-=item $bay->c_if()
-
-Returns referenece to hash.  Key: port.1 Value: port (iid)
-
-=item $bay->c_ip()
-
-Returns referenece to hash.  Key: port.1 
-
-The value of each hash entry can either be a scalar or an array.
-A scalar value is most likely a direct neighbor to that port. 
-It is possible that there is a non-bay device in between this device and the remote device.
-
-An array value represents a list of seen devices.  The only time you will get an array
-of nieghbors, is if there is a non-bay device in between two or more devices. 
-
-Use the data from the Layer2 Topology Table below to dig deeper.
-
-=item $bay->port()
-
-Returns reference to hash. Key: port.1 Value: port
-
-=item $bay->platform()
-
-Returns reference to hash. Key: port.1 Value: Remote Device Type
-
-=back
-
-=head2 Layer2 Topology info (s5EnMsTopNmmTable)
-
-=over
-
-=item $bay->bay_topo_slot()
-
-Returns reference to hash.  Key: Table entry, Value:slot number
-
-(B<s5EnMsTopNmmSlot>)
-
-=item $bay->bay_topo_port()
-
-Returns reference to hash.  Key: Table entry, Value:Port Number (interface iid)
-
-(B<s5EnMsTopNmmPort>)
-
-=item $bay->bay_topo_ip()
-
-Returns reference to hash.  Key: Table entry, Value:Remote IP address of entry
-
-(B<s5EnMsTopNmmIpAddr>)
-
-=item $bay->bay_topo_seg()
-
-Returns reference to hash.  Key: Table entry, Value:Remote Segment ID
-
-(B<s5EnMsTopNmmSegId>)
-
-=item $bay->bay_topo_mac
-(B<s5EnMsTopNmmMacAddr>)
-
-Returns reference to hash.  Key: Table entry, Value:Remote MAC address
-
-=item $bay->bay_topo_platform
-
-Returns reference to hash.  Key: Table entry, Value:Remote Device Type
-
-(B<s5EnMsTopNmmChassisType>)
-
-=item $bay->bay_topo_localseg
-
-Returns reference to hash.  Key: Table entry, Value:Boolean, if bay_topo_seg() is local
-
-(B<s5EnMsTopNmmLocalSeg>)
-
-=back
-
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in SNMP::Info::Layer2 for details.
-
-=cut

Info/Layer2/Baystack.pm

@@ -1,180 +1,166 @@
 # SNMP::Info::Layer2::Baystack
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Baystack;
-$VERSION = 0.9;
+
 use strict;
-
 use Exporter;
-use SNMP::Info;
-use SNMP::Info::Bridge;
 use SNMP::Info::SONMP;
-use SNMP::Info::RapidCity;
 use SNMP::Info::NortelStack;
+use SNMP::Info::RapidCity;
+use SNMP::Info::LLDP;
+use SNMP::Info::Layer3;
 
-@SNMP::Info::Layer2::Baystack::ISA = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::SONMP SNMP::Info::RapidCity SNMP::Info::NortelStack Exporter/;
+@SNMP::Info::Layer2::Baystack::ISA
+    = qw/SNMP::Info::SONMP SNMP::Info::NortelStack
+    SNMP::Info::RapidCity SNMP::Info::LLDP
+    SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer2::Baystack::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-%MIBS    = (
-            %SNMP::Info::MIBS,
-            %SNMP::Info::Bridge::MIBS,
-            %SNMP::Info::SONMP::MIBS,
-            %SNMP::Info::RapidCity::MIBS,
-            %SNMP::Info::NortelStack::MIBS,
-           );
+$VERSION = '3.03';
 
-%GLOBALS = ( 
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::SONMP::GLOBALS,
-            %SNMP::Info::RapidCity::GLOBALS,
-            %SNMP::Info::NortelStack::GLOBALS,            
-           );
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::RapidCity::MIBS, %SNMP::Info::NortelStack::MIBS,
+    %SNMP::Info::SONMP::MIBS,
+);
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::SONMP::FUNCS,
-            %SNMP::Info::RapidCity::FUNCS,
-            %SNMP::Info::NortelStack::FUNCS,            
-            'i_name2'    => 'ifName',
-            'i_mac2'      => 'ifPhysAddress',
-            );
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::RapidCity::GLOBALS, %SNMP::Info::NortelStack::GLOBALS,
+    %SNMP::Info::SONMP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::RapidCity::FUNCS, %SNMP::Info::NortelStack::FUNCS,
+    %SNMP::Info::SONMP::FUNCS,
+);
 
 # 450's report full duplex as speed = 20mbps?!
-$SNMP::Info::SPEED_MAP{20_000_000} = '10 Mbps';
-$SNMP::Info::SPEED_MAP{200_000_000} = '100 Mbps';
+$SNMP::Info::SPEED_MAP{20_000_000}    = '10 Mbps';
+$SNMP::Info::SPEED_MAP{200_000_000}   = '100 Mbps';
 $SNMP::Info::SPEED_MAP{2_000_000_000} = '1.0 Gbps';
 
-%MUNGE   = (
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::SONMP::MUNGE,
-            %SNMP::Info::RapidCity::MUNGE,
-            %SNMP::Info::NortelStack::MUNGE,
-            'i_mac2' => \&SNMP::Info::munge_mac,
-            );
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,    %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::RapidCity::MUNGE, %SNMP::Info::NortelStack::MUNGE,
+    %SNMP::Info::SONMP::MUNGE,
+);
 
 sub os {
     my $baystack = shift;
-    my $descr = $baystack->description();
-    my $model = $baystack->model();
+    my $descr    = $baystack->description() || "";
+    my $model    = $baystack->model() || "";
 
-    if ((defined $model and $model =~ /(470|460|BPS|5510|5520)/) and (defined $descr and $descr =~ m/SW:v[3-5]/i)) {
-       return 'boss';
+    if ( $descr =~ /Business Ethernet Switch.*SW:v/i ) {
+        return 'bes';
     }
-    return 'baystack';
+    if (   ( ( $model =~ /(420|425|BPS)/ ) and ( $descr =~ m/SW:v[1-2]/i ) )
+        or ( ( $model =~ /(410|450|380)/ ) ) )
+    {
+        return 'baystack';
+    }
+    if ( $model =~ /VSP/ ) {
+        return 'vsp';
+    }
+
+    return 'boss';
 }
 
 sub os_bin {
     my $baystack = shift;
-    my $descr = $baystack->description();
-    return undef unless defined $descr;
+    my $descr    = $baystack->description();
+    return unless defined $descr;
 
     # 303 / 304
-    if ($descr =~ m/Rev: \d+\.(\d+\.\d+\.\d+)-\d+\.\d+\.\d+\.\d+/){
+    if ( $descr =~ m/Rev: \d+\.(\d+\.\d+\.\d+)-\d+\.\d+\.\d+\.\d+/ ) {
         return $1;
     }
 
     # 450
-    if ($descr =~ m/FW:V(\d+\.\d+)/){
+    if ( $descr =~ m/FW:V(\d+\.\d+)/ ) {
         return $1;
     }
 
-    if ($descr =~ m/FW:(\d+\.\d+\.\d+\.\d+)/i){
+    if ( $descr =~ m/FW:(\d+\.\d+\.\d+\.\d+)/i ) {
         return $1;
     }
-    return undef;
+    return;
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
     my $baystack = shift;
-    my $id = $baystack->id();
-    return undef unless defined $id;
+    my $id       = $baystack->id();
+    return unless defined $id;
     my $model = &SNMP::translateObj($id);
     return $id unless defined $model;
-    $model =~ s/^sreg-//i;
 
     my $descr = $baystack->description();
 
-    return '303' if (defined $descr and $descr =~ /\D303\D/);
-    return '304' if (defined $descr and $descr =~ /\D304\D/);
-    return '350' if ($model =~ /BayStack350/);
-    return '380' if ($model =~ /BayStack380/);
-    return '410' if ($model =~ /BayStack410/);
-    return '420' if ($model =~ /BayStack420/);
-    return '425' if ($model =~ /BayStack425/);
-    return '450' if ($model =~ /BayStack450/);
-    return '470' if ($model =~ /BayStack470/i);
-    return '460' if ($model =~ /BayStack460/i);
-    return 'BPS' if ($model =~ /BPS2000/i);
-    return '5510' if ($model =~ /BayStack5510/i);
-    return '5520' if ($model =~ /BayStack5520/i);
+    return '303' if ( defined $descr and $descr =~ /\D303\D/ );
+    return '304' if ( defined $descr and $descr =~ /\D304\D/ );
+    return 'BPS' if ( $model =~ /BPS2000/i );
     
+    # Pull sreg- from all
+    $model =~ s/^sreg-//;
+    # Strip ES/ERS/BayStack etc. from those families
+    $model =~ s/^(E(R)?S|BayStack|Ethernet(Routing)?Switch)-?//;
+
     return $model;
 }
 
-sub i_ignore {
-    my $baystack = shift;
-    my $i_type = $baystack->i_type();
-
-    my %i_ignore;
-    foreach my $if (keys %$i_type){
-        my $type = $i_type->{$if};
-        next unless defined $type;
-        $i_ignore{$if}++ if $type =~ /(54|loopback|propvirtual|cpu)/i;
-    }
-    return \%i_ignore;
-}
-
 sub interfaces {
     my $baystack = shift;
-    my $i_index = $baystack->i_index();
+    my $partial  = shift;
+
+    my $i_index      = $baystack->i_index($partial) || {};
     my $index_factor = $baystack->index_factor();
-    my $slot_offset = $baystack->slot_offset();
-    
+    my $slot_offset  = $baystack->slot_offset();
+
     my %if;
-    foreach my $iid (keys %$i_index){
+    foreach my $iid ( keys %$i_index ) {
         my $index = $i_index->{$iid};
         next unless defined $index;
-        # Ignore cascade ports
-        next if $index > 513;
 
-	my $port = ($index % $index_factor);
-	my $slot = (int($index / $index_factor)) + $slot_offset;
+        # Ignore cascade ports
+        next if $index > $index_factor * 8;
+
+        my $port = ( $index % $index_factor );
+        my $slot = ( int( $index / $index_factor ) ) + $slot_offset;
 
         my $slotport = "$slot.$port";
         $if{$iid} = $slotport;
@@ -182,64 +168,188 @@ sub interfaces {
     return \%if;
 }
 
-sub i_mac { 
+sub i_mac {
     my $baystack = shift;
-    my $i_mac = $baystack->i_mac2();
+    my $partial  = shift;
+
+    my $i_mac = $baystack->orig_i_mac($partial) || {};
 
     my %i_mac;
+
     # Baystack 303's with a hw rev < 2.11.4.5 report the mac as all zeros
-    foreach my $iid (keys %$i_mac){
+    foreach my $iid ( keys %$i_mac ) {
         my $mac = $i_mac->{$iid};
         next unless defined $mac;
         next if $mac eq '00:00:00:00:00:00';
-        $i_mac{$iid}=$mac;
+        $i_mac{$iid} = $mac;
     }
     return \%i_mac;
 }
 
 sub i_name {
     my $baystack = shift;
-    my $i_index = $baystack->i_index();
-    my $i_alias = $baystack->i_alias();
-    my $i_name2  = $baystack->i_name2();
+    my $partial  = shift;
+
+    my $i_index = $baystack->i_index($partial)     || {};
+    my $i_alias = $baystack->i_alias($partial)     || {};
+    my $i_name2 = $baystack->orig_i_name($partial) || {};
 
     my %i_name;
-    foreach my $iid (keys %$i_name2){
-        my $name = $i_name2->{$iid};
+    foreach my $iid ( keys %$i_name2 ) {
+        my $name  = $i_name2->{$iid};
         my $alias = $i_alias->{$iid};
-        $i_name{$iid} = (defined $alias and $alias !~ /^\s*$/) ?
-                        $alias : 
-                        $name;
+        $i_name{$iid}
+            = ( defined $alias and $alias !~ /^\s*$/ )
+            ? $alias
+            : $name;
     }
 
     return \%i_name;
 }
 
 sub index_factor {
-    my $baystack   = shift;
-    my $model   = $baystack->model();
-    my $os      = $baystack->os();
-    my $op_mode = $baystack->ns_op_mode();
-    
+    my $baystack = shift;
+    my $model    = $baystack->model() || "";
+    my $os       = $baystack->os();
+    my $os_ver   = $baystack->os_ver();
+    my $op_mode  = $baystack->ns_op_mode();
+
     $op_mode = 'pure' unless defined $op_mode;
+    if ( $os_ver =~ m/^(\d+)\./ ) {
+        $os_ver = $1;
+    } else {
+        $os_ver = 1;
+    }
 
     my $index_factor = 32;
-    $index_factor = 64 if ((defined $model and $model =~ /(470)/) or ($os eq 'boss') and ($op_mode eq 'pure'));
-    
+    $index_factor = 64
+        if ( ( $model =~ /(470)/ )
+        or ( $os =~ m/(boss|bes)/ ) and ( $op_mode eq 'pure' ) );
+    $index_factor = 128
+        if ( ( $model =~ /(5[56]\d\d)|VSP/ )
+        and ( $os_ver >= 6 ) );
+
     return $index_factor;
 }
 
+
+
+# Newer devices support ENTITY-MIB, use if available otherwise use proprietary
+# methods.
+
+sub e_index {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_index($partial) || $stack->ns_e_index($partial);
+}
+
+sub e_class {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_class($partial) || $stack->ns_e_class($partial);
+}
+
+sub e_descr {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_descr($partial) || $stack->ns_e_descr($partial);
+}
+
+sub e_name {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_name($partial) || $stack->ns_e_name($partial);
+}
+
+sub e_fwver {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_fwver($partial) || $stack->ns_e_fwver($partial);
+}
+
+sub e_hwver {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_hwver($partial) || $stack->ns_e_hwver($partial);
+}
+
+sub e_parent {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_parent($partial) || $stack->ns_e_parent($partial);
+}
+
+sub e_pos {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_pos($partial) || $stack->ns_e_pos($partial);
+}
+
+sub e_serial {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_serial($partial) || $stack->ns_e_serial($partial);
+}
+
+sub e_swver {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_swver($partial) || $stack->ns_e_swver($partial);
+}
+
+sub e_type {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_type($partial) || $stack->ns_e_type($partial);
+}
+
+sub e_vendor {
+    my $stack   = shift;
+    my $partial = shift;
+
+    return $stack->SUPER::e_vendor($partial) || $stack->ns_e_vendor($partial);
+}
+
+# fix for stack of switches without POE on module 1
+# https://sourceforge.net/tracker/?func=detail&aid=3317739&group_id=70362&atid=527529
+sub peth_port_ifindex {
+    my $stack = shift;
+    my $partial = shift;
+
+    my %peth_port_ifindex = ();
+    my $poe_port_st = $stack->peth_port_status($partial);
+    my $if_index = $stack->interfaces($partial);
+
+    foreach my $i (keys %$if_index) {
+        next unless defined $poe_port_st->{$if_index->{$i}};
+        $peth_port_ifindex{$if_index->{$i}} = $i;
+    }
+    return \%peth_port_ifindex;
+}
+
 1;
+
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Baystack - SNMP Interface to Nortel Networks' Baystack Switches
+SNMP::Info::Layer2::Baystack - SNMP Interface to Avaya Ethernet Switch
+(Baystack) and VSP 7000 series switches
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>),
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -247,7 +357,6 @@ Eric Miller (C<eric@jeneric.org>)
  my $baystack = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -259,11 +368,12 @@ Eric Miller (C<eric@jeneric.org>)
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Nortel Networks' 
-Baystack device through SNMP. 
+Provides abstraction to the configuration information obtainable from an
+Avaya Ethernet Switch (formerly Nortel/Bay Baystack) and VSP 7000 series
+through SNMP. 
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
 my $baystack = new SNMP::Info::Layer2::Baystack(...);
 
@@ -271,36 +381,30 @@ my $baystack = new SNMP::Info::Layer2::Baystack(...);
 
 =over
 
-=item SNMP::Info
-
-=item SNMP::Info::Bridge
+=item SNMP::Info::SONMP
 
 =item SNMP::Info::NortelStack
 
-=item SNMP::Info::SONMP
-
 =item SNMP::Info::RapidCity
 
-=back
+=item SNMP::Info::LLDP
 
-=head2 Required MIBs
-
-=over
-
-=item Inherited Classes' MIBs
-
-See SNMP::Info for its own MIB requirements.
-
-See SNMP::Info::Bridge for its own MIB requirements.
-
-See SNMP::Info::NortelStack for its own MIB requirements.
-
-See SNMP::Info::SONMP for its own MIB requirements.
-
-See SNMP::Info::RapidCity for its own MIB requirements.
+=item SNMP::Info::Layer3
 
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::SONMP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::NortelStack/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::RapidCity/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -309,23 +413,25 @@ These are methods that return scalar value from SNMP
 
 =item $baystack->vendor()
 
-Returns 'Nortel'
+Returns 'avaya'
 
 =item $baystack->model()
 
-Cross references $baystack->id() to the SYNOPTICS-MIB and returns
+Cross references $baystack->id() to the F<SYNOPTICS-MIB> and returns
 the results.  303s and 304s have the same ID, so we have a hack
-to return depending on which it is. 
+to return depending on which it is.
 
-Removes sreg- from the model name
+Returns BPS for Business Policy Switch
+
+For others extracts and returns the switch numeric designation.
 
 =item $baystack->os()
 
-Returns 'Baystack' or 'BoSS' depending on software version.
+Returns 'baystack' or 'boss' depending on software version.
 
 =item $baystack->os_bin()
 
-Returns the firmware version extracted from B<sysDescr>.
+Returns the firmware version extracted from C<sysDescr>.
 
 =back
 
@@ -339,34 +445,34 @@ Required by SNMP::Info::SONMP.  Number representing the number of ports
 reserved per slot within the device MIB.
 
 Index factor on the Baystack switches are determined by the formula: Index
-Factor = 64 if (model = 470 or (os eq 'BoSS' and operating in pure mode))
+Factor = 64 if (model = 470 or (os eq 'boss' and operating in pure mode))
 or else Index factor = 32.
 
 Returns either 32 or 64 based upon the formula.
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Global Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info for details.
-
-=head2 Globals imported from SNMP::Info::Bridge
-
-See documentation in SNMP::Info::Bridge for details.
+See L<SNMP::Info::SONMP/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::NortelStack
 
-See documentation in SNMP::Info::NortelStack for details.
-
-=head2 Global Methods imported from SNMP::Info::SONMP
-
-See documentation in SNMP::Info::SONMP for details.
+See L<SNMP::Info::NortelStack/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::RapidCity
 
-See documentation in SNMP::Info::RapidCity for details.
+See L<SNMP::Info::RapidCity/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -379,7 +485,8 @@ to a hash.
 
 Returns reference to the map between IID and physical Port.
 
-  Slot and port numbers on the Baystack switches are determined by the formula:
+  Slot and port numbers on the Baystack switches are determined by the
+  formula:
   
   port = (Interface index % Index factor)
   slot = (int(Interface index / Index factor)) + Slot offset
@@ -392,35 +499,108 @@ Returns reference to hash of IIDs to ignore.
 
 =item $baystack->i_mac()
 
-Returns the B<ifPhysAddress> table entries. 
+Returns the C<ifPhysAddress> table entries. 
 
 Removes all entries matching '00:00:00:00:00:00' -- Certain 
 revisions of Baystack firmware report all zeros for each port mac.
 
 =item $baystack->i_name()
 
-Crosses ifName with ifAlias and returns the human set port name if exists.
+Crosses C<ifName> with C<ifAlias> and returns the human set port name if
+exists.
+
+=item $poe->peth_port_ifindex()
+
+Maps the C<pethPsePortTable> to C<ifIndex> by way of the F<ENTITY-MIB>.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info
+=head2 F<ENTITY-MIB> Information
 
-See documentation in SNMP::Info for details.
+For older devices which do not support F<ENTITY-MIB>, these methods emulate
+Physical Table methods using F<S5-CHASSIS-MIB>.  See
+L<SNMP::Info::NortelStack/"TABLE METHODS"> for details on ns_e_* methods.
 
-=head2 Table Methods imported from SNMP::Info::Bridge
+=over
 
-See documentation in SNMP::Info::Bridge for details.
+=item $baystack->e_index() 
 
-=head2 Table Methods imported from SNMP::Info::NortelStack
+If the device doesn't support C<entPhysicalDescr>, this will try ns_e_index().
+Note that this is based on C<entPhysicalDescr> due to implementation
+details of SNMP::Info::Entity::e_index().
 
-See documentation in SNMP::Info::NortelStack for details.
+=item $baystack->e_class() 
+
+If the device doesn't support C<entPhysicalClass>, this will try ns_e_class().
+
+=item $baystack->e_descr() 
+
+If the device doesn't support C<entPhysicalDescr>, this will try ns_e_descr().
+
+=item $baystack->e_name() 
+
+If the device doesn't support C<entPhysicalName>, this will try ns_e_name().
+
+=item $baystack->e_fwver() 
+
+If the device doesn't support C<entPhysicalFirmwareRev>, this will try
+ns_e_fwver().
+
+=item $baystack->e_hwver() 
+
+If the device doesn't support C<entPhysicalHardwareRev>, this will try
+ns_e_hwver().
+
+=item $baystack->e_parent() 
+
+If the device doesn't support C<entPhysicalContainedIn>, this will try
+ns_e_parent().
+
+=item $baystack->e_pos() 
+
+If the device doesn't support C<entPhysicalParentRelPos>, this will try
+ns_e_pos().
+
+=item $baystack->e_serial() 
+
+If the device doesn't support C<entPhysicalSerialNum>, this will try
+ns_e_serial().
+
+=item $baystack->e_swver() 
+
+If the device doesn't support C<entPhysicalSoftwareRev>, this will try
+ns_e_swver().
+
+=item $baystack->e_type() 
+
+If the device doesn't support C<entPhysicalVendorType>, this will try
+ns_e_type().
+
+=item $baystack->e_vendor() 
+
+If the device doesn't support C<entPhysicalMfgName>, this will try
+ns_e_vendor().
+
+=back
 
 =head2 Table Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info::SONMP for details.
+See L<SNMP::Info::SONMP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::NortelStack
+
+See L<SNMP::Info::NortelStack/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::RapidCity
 
-See documentation in SNMP::Info::RapidCity for details.
+See L<SNMP::Info::RapidCity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/C1900.pm

@@ -1,84 +1,100 @@
 # SNMP::Info::Layer2::C1900
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::C1900;
-$VERSION = 0.9;
-# $Id$
+
 use strict;
-
 use Exporter;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoConfig;
 use SNMP::Info::Layer2;
-use SNMP::Info::CiscoVTP;
 
-@SNMP::Info::Layer2::C1900::ISA = qw/SNMP::Info::Layer2 SNMP::Info::CiscoVTP Exporter/;
+@SNMP::Info::Layer2::C1900::ISA = qw/SNMP::Info::CDP SNMP::Info::CiscoStats
+    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    Exporter/;
 @SNMP::Info::Layer2::C1900::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
 
-# Set for No CDP
 %GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-            'c1900_flash_status'    => 'upgradeFlashBankStatus',
-            );
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    'c1900_flash_status' => 'upgradeFlashBankStatus',
+);
 
-%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-            'i_type2'              => 'ifType',
-            'i_name2'              => 'ifName',
-            # ESSWITCH-MIB
-            'c1900_p_index'        => 'swPortIndex',
-            'c1900_p_ifindex'      => 'swPortIfIndex',
-            'c1900_p_duplex'       => 'swPortDuplexStatus', 
-            'c1900_p_duplex_admin' => 'swPortFullDuplex', 
-            'c1900_p_name'         => 'swPortName', 
-            'c1900_p_up_admin'     => 'swPortAdminStatus', 
-            'c1900_p_type'         => 'swPortMediaCapability',
-            'c1900_p_media'        => 'swPortConnectorType',
-            );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
 
-%MIBS    = (
-            %SNMP::Info::Layer2::MIBS,
-             %SNMP::Info::CiscoVTP::MIBS,
-            # Also known as the ESSWITCH-MIB
-            'STAND-ALONE-ETHERNET-SWITCH-MIB' =>  'series2000'
-            );
+    # ESSWITCH-MIB
+    'c1900_p_index'        => 'swPortIndex',
+    'c1900_p_ifindex'      => 'swPortIfIndex',
+    'c1900_p_duplex'       => 'swPortDuplexStatus',
+    'c1900_p_duplex_admin' => 'swPortFullDuplex',
+    'c1900_p_name'         => 'swPortName',
+    'c1900_p_up_admin'     => 'swPortAdminStatus',
+    'c1900_p_type'         => 'swPortMediaCapability',
+    'c1900_p_media'        => 'swPortConnectorType',
+);
 
-%MUNGE   = (%SNMP::Info::Layer2::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-            );
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+
+    # Also known as the ESSWITCH-MIB
+    'STAND-ALONE-ETHERNET-SWITCH-MIB' => 'series2000'
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
+);
+
+sub bulkwalk_no         { return 1; }
+sub cisco_comm_indexing { return 1; }
 
 sub vendor {
     return 'cisco';
 }
+
 sub os {
     return 'catalyst';
 }
@@ -89,128 +105,175 @@ sub os_ver {
     # Check for superclass one
     my $os_ver = $c1900->SUPER::os_ver();
     return $os_ver if defined $os_ver;
-    
+
     my $c1900_flash_status = $c1900->c1900_flash_status();
-    return undef unless defined $c1900_flash_status;
+    return unless defined $c1900_flash_status;
 
-    if ($c1900_flash_status =~ m/V(\d+\.\d+(\.\d+)?)/){
+    if ( $c1900_flash_status =~ m/V(\d+\.\d+(\.\d+)?)/ ) {
         return $1;
-    }  
-    return undef;
-}
-
-sub cisco_comm_indexing {
-    1;
+    }
+    return;
 }
 
 sub interfaces {
-    my $c1900 = shift;
-    my $i_descr = $c1900->i_description();
+    my $c1900   = shift;
+    my $partial = shift;
 
-    foreach my $iid (keys %$i_descr){
+    my $i_descr = $c1900->i_description($partial) || {};
+
+    foreach my $iid ( keys %$i_descr ) {
         $i_descr->{$iid} =~ s/\s*$//;
     }
     return $i_descr;
 }
 
 sub i_duplex {
-    my $c1900 = shift;
-    
-    my $interfaces     = $c1900->interfaces();
-    my $c1900_p_index  = $c1900->c1900_p_index();
-    my $c1900_p_duplex = $c1900->c1900_p_duplex();
- 
+    my $c1900   = shift;
+    my $partial = shift;
 
-    my %reverse_1900 = reverse %$c1900_p_index;
+    my $c1900_p_duplex = $c1900->c1900_p_duplex($partial) || {};
 
     my %i_duplex;
-    foreach my $if (keys %$interfaces){
-        my $port_1900 = $reverse_1900{$if};
-        next unless defined $port_1900;
-        my $duplex = $c1900_p_duplex->{$port_1900};
-        next unless defined $duplex; 
-    
+    foreach my $if ( keys %$c1900_p_duplex ) {
+        my $duplex = $c1900_p_duplex->{$if};
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /half/i;
         $duplex = 'full' if $duplex =~ /full/i;
-        $i_duplex{$if}=$duplex; 
+        $i_duplex{$if} = $duplex;
     }
     return \%i_duplex;
 }
 
 sub i_duplex_admin {
-    my $c1900 = shift;
-    
-    my $interfaces     = $c1900->interfaces();
-    my $c1900_p_index  = $c1900->c1900_p_index();
-    my $c1900_p_admin  = $c1900->c1900_p_duplex_admin();
- 
+    my $c1900   = shift;
+    my $partial = shift;
 
-    my %reverse_1900 = reverse %$c1900_p_index;
+    my $c1900_p_admin = $c1900->c1900_p_duplex_admin($partial) || {};
 
     my %i_duplex_admin;
-    foreach my $if (keys %$interfaces){
-        my $port_1900 = $reverse_1900{$if};
-        next unless defined $port_1900;
-        my $duplex = $c1900_p_admin->{$port_1900};
-        next unless defined $duplex; 
-    
+    foreach my $if ( keys %$c1900_p_admin ) {
+        my $duplex = $c1900_p_admin->{$if};
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /disabled/i;
         $duplex = 'full' if $duplex =~ /flow control/i;
         $duplex = 'full' if $duplex =~ /enabled/i;
         $duplex = 'auto' if $duplex =~ /auto/i;
-        $i_duplex_admin{$if}=$duplex; 
+        $i_duplex_admin{$if} = $duplex;
     }
     return \%i_duplex_admin;
 }
 
-sub i_type {
-    my $c1900 = shift;
-
-    my $i_type        = $c1900->i_type2();
-    my $c1900_p_index = $c1900->c1900_p_index();
-    my $c1900_p_type  = $c1900->c1900_p_type();
-    my $c1900_p_media = $c1900->c1900_p_media();
-
-    foreach my $p_iid (keys %$c1900_p_index){
-        my $port  = $c1900_p_index->{$p_iid};
-        my $type  = $c1900_p_type->{$p_iid};
-        my $media = $c1900_p_media->{$p_iid};
-
-        next unless defined $port;
-        next unless defined $type;
-        next unless defined $media;
-
-        $i_type->{$port} = "$type $media";
-    }
-
-    return $i_type;
-}
-
 sub i_name {
-    my $c1900 = shift;
-    my $i_name = $c1900->i_name2();
-    my $c1900_p_name = $c1900->c1900_p_name();
-    
-    foreach my $port (keys %$c1900_p_name){
+    my $c1900   = shift;
+    my $partial = shift;
+
+    my $i_name       = $c1900->orig_i_name($partial)  || {};
+    my $c1900_p_name = $c1900->c1900_p_name($partial) || {};
+
+    foreach my $port ( keys %$c1900_p_name ) {
         my $name = $c1900_p_name->{$port};
         next unless defined $name;
         next unless $name !~ /^\s*$/;
         $i_name->{$port} = $name;
     }
-    
+
     return $i_name;
 }
 
+sub set_i_duplex_admin {
+    my $c1900 = shift;
+    my ( $duplex, $port ) = @_;
+
+    # map a textual duplex to an integer one the switch understands
+    my %duplexes = qw/full 1 half 2 auto 3/;
+
+    my $iid = $c1900->c1900_p_ifindex($port);
+
+    $duplex = lc($duplex);
+
+    return 0 unless defined $duplexes{$duplex};
+
+    return $c1900->set_c1900_p_duplex_admin( $duplexes{$duplex}, $iid );
+}
+
+sub i_vlan {
+    my $c1900   = shift;
+    my $partial = shift;
+
+    # Overlap allows more than one VLAN per port.  Unable to determine default
+    my $overlap = $c1900->bridgeGroupAllowMembershipOverlap()
+        || $c1900->vlanAllowMembershipOverlap()
+        || 'disabled';
+
+    if ( $overlap eq 'enabled' ) {
+        return;
+    }
+
+    my $member_of = $c1900->bridgeGroupMemberPortOfBridgeGroup()
+        || $c1900->vlanMemberPortOfVlan();
+
+    my $i_pvid = {};
+    foreach my $idx ( keys %$member_of ) {
+        my @values = split( /\./, $idx );
+        my ( $vlan, $port ) = @values;
+        next unless $vlan;
+        next unless $port;
+        next if ( defined $partial and $port !~ /^$partial$/ );
+        my $value = $member_of->{$idx};
+        next if ( $value eq 'false' );
+
+        $i_pvid->{$port} = $vlan;
+    }
+    return $i_pvid;
+}
+
+sub i_vlan_membership {
+    my $c1900   = shift;
+    my $partial = shift;
+
+    my $member_of = $c1900->bridgeGroupMemberPortOfBridgeGroup()
+        || $c1900->vlanMemberPortOfVlan();
+
+    my $i_vlan_membership = {};
+    foreach my $idx ( keys %$member_of ) {
+        my @values = split( /\./, $idx );
+        my ( $vlan, $port ) = @values;
+        next unless $vlan;
+        next unless $port;
+        next if ( defined $partial and $port !~ /^$partial$/ );
+        my $value = $member_of->{$idx};
+        next if ( $value eq 'false' );
+
+        push( @{ $i_vlan_membership->{$port} }, $vlan );
+    }
+    return $i_vlan_membership;
+}
+
+sub bp_index {
+    my $c1900   = shift;
+    my $partial = shift;
+
+    my $if_index = $c1900->i_index($partial);
+    my $index = $c1900->orig_bp_index($partial) || {};
+    foreach my $iid ( keys %$if_index ) {
+        $index->{$iid} = $iid if(!defined $index->{$iid});
+    }
+    return $index;
+}
+
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::C1900 - Perl5 Interface to SNMP data from Cisco Catlyst 1900 Network Switches running CatOS
+SNMP::Info::Layer2::C1900 - SNMP Interface to data from Cisco Catalyst 1900
+Network Switches running CatOS
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -218,7 +281,6 @@ Max Baker (C<max@warped.org>)
  my $c1900 = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 1
@@ -230,13 +292,13 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Catalyst 1900 device through SNMP. 
-See SNMP::Info for full documentation
+Provides abstraction to the configuration information obtainable from a
+Catalyst 1900 device through SNMP.  See SNMP::Info for full documentation
 
 Note that most of these devices only talk SNMP version 1, but not all.
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $c1900 = new SNMP::Info::Layer2::C1900(...);
 
@@ -244,6 +306,12 @@ a more specific class using the method above.
 
 =over
 
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoConfig
+
 =item SNMP::Info::Layer2
 
 =back
@@ -252,18 +320,24 @@ a more specific class using the method above.
 
 =over
 
-=item STAND-ALONE-ETHERNET-SWITCH-MIB (ESSWITCH-MIB)
+=item F<STAND-ALONE-ETHERNET-SWITCH-MIB (ESSWITCH-MIB)>
 
-ESSWITCH-MIB is included in the Version 1 MIBS from Cisco.
+F<ESSWITCH-MIB> is included in the Version 1 MIBs from Cisco.
 
 They can be found at ftp://ftp.cisco.com/pub/mibs/v1/v1.tar.gz
 
-=item Inherited Classes' MIBs
-
-MIBs listed in SNMP::Info::Layer2
-
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -275,7 +349,7 @@ These are methods that return scalar value from SNMP
 Usually contains the version of the software loaded in flash.
 Used by os_ver()
 
-B<STAND-ALONE-ETHERNET-SWITCH-MIB::upgradeFlashBankStatus>
+C<STAND-ALONE-ETHERNET-SWITCH-MIB::upgradeFlashBankStatus>
 
 =item $c1900->os()
 
@@ -294,43 +368,92 @@ Returns 'cisco' :)
 
 =back
 
+=head2 Overrides
+
+=over
+
+=item $c1900->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=item $c1900->bulkwalk_no
+
+Return C<1>.  Bulkwalk is turned off for this class.
+
+=back
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
 
 =head2 Overrides
 
 =over
 
+=item $c1900->interfaces()
+
+Returns reference to the map between IID and physical Port.
+
 =item $c1900->i_duplex()
 
 Returns reference to map of IIDs to current link duplex
 
-Crosses $c1900->c1900_p_index() with $c1900->c1900_p_duplex;
-
 =item $c1900->i_duplex_admin()
 
 Returns reference to hash of IIDs to admin duplex setting
 
-Crosses $c1900->c1900_p_index() with $c1900->c1900_p_duplex_admin;
-
 =item $c1900->i_name()
 
-Crosses ifName with c1900_p_name() and returns the human set port name if exists.
+Crosses C<ifName> with $c1900->c1900_p_name() and returns the human set port
+name if exists.
 
-=item $c1900->i_type()
+=item $c1900->i_vlan()
 
-Returns reference to hash of IID to port type
+Returns a mapping between the interface and the VLAN / bridge group if overlap
+is not enabled.
 
-Takes the default ifType and overrides it with 
+=item $c1900->i_vlan_membership()
 
-c1900_p_type() and c1900_p_media()  if they exist.
+Returns reference to hash of arrays: key = interface, value = array of VLAN /
+bridge group IDs.
+
+  Example:
+  my $interfaces = $c1900->interfaces();
+  my $vlans      = $c1900->i_vlan_membership();
+  
+  foreach my $iid (sort keys %$interfaces) {
+    my $port = $interfaces->{$iid};
+    my $vlan = join(',', sort(@{$vlans->{$iid}}));
+    print "Port: $port VLAN: $vlan\n";
+  }
+
+
+=item $c1900->bp_index()
+
+Returns a bp_index that contains the original bp_index entries and extra
+entries for those interfaces listed in if_index, as some C1900 devices do not
+return complete bp_indexes.
 
 =back
 
-=head2 STAND-ALONE-ETHERNET-SWITCH-MIB Switch Port Table Entries:
+=head2 F<STAND-ALONE-ETHERNET-SWITCH-MIB> Switch Port Table Entries:
 
 =over
 
@@ -338,48 +461,81 @@ c1900_p_type() and c1900_p_media()  if they exist.
 
 Maps the Switch Port Table to the IID
 
-B<swPortIfIndex>
+C<swPortIfIndex>
 
 =item $c1900->c1900_p_duplex()
 
 Gives Port Duplex Info
 
-B<swPortDuplexStatus>
+(C<swPortDuplexStatus>)
 
 =item $c1900->c1900_p_duplex_admin()
 
 Gives admin setting for Duplex Info
 
-B<swPortFullDuplex>
+(C<swPortFullDuplex>)
 
 =item $c1900->c1900_p_name()
 
 Gives human set name for port 
 
-B<swPortName>
+(C<swPortName>)
 
 =item $c1900->c1900_p_up_admin()
 
 Gives Admin status of port enabled.
 
-B<swPortAdminStatus>
+(C<swPortAdminStatus>)
 
 =item $c1900->c1900_p_type()
 
-Gives Type of port, ie. "general-ethernet"
+Gives Type of port, i.e. C<"general-ethernet">
 
-B<swPortMediaCapability>
+(C<swPortMediaCapability>)
 
 =item $c1900->c1900_p_media()
 
-Gives the media of the port , ie "fiber-sc"
+Gives the media of the port , i.e. "C<fiber-sc>"
 
-B<swPortConnectorType>
+(C<swPortConnectorType>)
 
 =back
 
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head1 SET METHODS
+
+These are methods that provide SNMP set functionality for overridden methods
+or provide a simpler interface to complex set operations.  See
+L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
+operations. 
+
+=over
+
+=item $c1900->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>.  Speed
+choices are 'auto', 'half', 'full'.
+
+  Example:
+  my %if_map = reverse %{$c1900->interfaces()};
+  $c1900->set_i_duplex_admin('auto', $if_map{'1'}) 
+    or die "Couldn't change port duplex. ",$c1900->error(1);
+
+=back
 
 =cut

Info/Layer2/C2900.pm

@@ -1,148 +1,204 @@
 # SNMP::Info::Layer2::C2900
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::C2900;
-$VERSION = 0.9;
-# $Id$
+
 use strict;
-
 use Exporter;
-use SNMP::Info::Layer2;
 use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::Layer2;
 
-@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::Layer2 SNMP::Info::CiscoVTP Exporter/;
+@SNMP::Info::Layer2::C2900::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoConfig
+    SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::C2900::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
 
-# Set for No CDP
 %GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-            );
+    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS, %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+);
 
-%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-            'i_name'               => 'ifAlias',
-            # C2900PortEntry
-            'c2900_p_index'        => 'c2900PortIfIndex',
-            'c2900_p_duplex'       => 'c2900PortDuplexStatus',
-            'c2900_p_duplex_admin' => 'c2900PortDuplexState',
-            'c2900_p_speed_admin'  => 'c2900PortAdminSpeed',
-           );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,
+    'i_name' => 'ifAlias',
 
-%MIBS    = ( %SNMP::Info::Layer2::MIBS,
-             %SNMP::Info::CiscoVTP::MIBS,
-            'CISCO-C2900-MIB' => 'ciscoC2900MIB',
-           );
+    # C2900PortEntry
+    'c2900_p_index'        => 'c2900PortIfIndex',
+    'c2900_p_duplex'       => 'c2900PortDuplexStatus',
+    'c2900_p_duplex_admin' => 'c2900PortDuplexState',
+    'c2900_p_speed_admin'  => 'c2900PortAdminSpeed',
+);
 
-%MUNGE   = (%SNMP::Info::Layer2::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-           );
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS, 'CISCO-C2900-MIB' => 'ciscoC2900MIB',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoVTP::MUNGE,
+);
 
 sub vendor {
     return 'cisco';
 }
 
 sub cisco_comm_indexing {
-    1;
+    return 1;
 }
 
 sub i_duplex {
-    my $c2900 = shift;
-    
-    my $interfaces     = $c2900->interfaces();
-    my $c2900_p_index  = $c2900->c2900_p_index();
+    my $c2900   = shift;
+    my $partial = shift;
+
+    my $interfaces     = $c2900->interfaces($partial);
+    my $c2900_p_index  = $c2900->c2900_p_index() || {};
     my $c2900_p_duplex = $c2900->c2900_p_duplex();
- 
 
     my %reverse_2900 = reverse %$c2900_p_index;
 
     my %i_duplex;
-    foreach my $if (keys %$interfaces){
+    foreach my $if ( keys %$interfaces ) {
         my $port_2900 = $reverse_2900{$if};
         next unless defined $port_2900;
         my $duplex = $c2900_p_duplex->{$port_2900};
-        next unless defined $duplex; 
-    
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /half/i;
         $duplex = 'full' if $duplex =~ /full/i;
-        $i_duplex{$if}=$duplex; 
+        $i_duplex{$if} = $duplex;
     }
     return \%i_duplex;
 }
 
 sub i_duplex_admin {
-    my $c2900 = shift;
-    
-    my $interfaces     = $c2900->interfaces();
-    my $c2900_p_index  = $c2900->c2900_p_index();
+    my $c2900   = shift;
+    my $partial = shift;
+
+    my $interfaces    = $c2900->interfaces($partial);
+    my $c2900_p_index = $c2900->c2900_p_index() || {};
     my $c2900_p_admin = $c2900->c2900_p_duplex_admin();
- 
 
     my %reverse_2900 = reverse %$c2900_p_index;
 
     my %i_duplex_admin;
-    foreach my $if (keys %$interfaces){
+    foreach my $if ( keys %$interfaces ) {
         my $port_2900 = $reverse_2900{$if};
         next unless defined $port_2900;
         my $duplex = $c2900_p_admin->{$port_2900};
-        next unless defined $duplex; 
-    
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /half/i;
         $duplex = 'full' if $duplex =~ /full/i;
         $duplex = 'auto' if $duplex =~ /auto/i;
-        $i_duplex_admin{$if}=$duplex; 
+        $i_duplex_admin{$if} = $duplex;
     }
     return \%i_duplex_admin;
 }
 
+sub set_i_speed_admin {
+    my $c2900 = shift;
+    my ( $speed, $iid ) = @_;
+
+    # map speeds to those the switch will understand
+    my %speeds = qw/auto 1 10 10000000 100 100000000/;
+
+    my $c2900_p_index = $c2900->c2900_p_index() || {};
+    my %reverse_2900 = reverse %$c2900_p_index;
+
+    $speed = lc($speed);
+
+    return unless defined $speeds{$speed};
+
+    # account for weirdness of c2900 mib
+    $iid = $reverse_2900{$iid};
+
+    return $c2900->set_c2900_p_speed_admin( $speeds{$speed}, $iid );
+}
+
+sub set_i_duplex_admin {
+    my $c2900 = shift;
+    my ( $duplex, $iid ) = @_;
+
+    # map a textual duplex to an integer one the switch understands
+    my %duplexes = qw/full 1 half 2 auto 3/;
+
+    my $c2900_p_index = $c2900->c2900_p_index() || {};
+    my %reverse_2900 = reverse %$c2900_p_index;
+
+    $duplex = lc($duplex);
+
+    return unless defined $duplexes{$duplex};
+
+    # account for weirdness of c2900 mib
+    $iid = $reverse_2900{$iid};
+
+    return $c2900->set_c2900_p_duplex_admin( $duplexes{$duplex}, $iid );
+}
+
 # Use i_descritption for port key, cuz i_name can be manually entered.
 sub interfaces {
-    my $c2900 = shift;
-    my $interfaces = $c2900->i_index();
-    my $i_descr    = $c2900->i_description(); 
+    my $c2900   = shift;
+    my $partial = shift;
+
+    my $interfaces = $c2900->i_index($partial)       || {};
+    my $i_descr    = $c2900->i_description($partial) || {};
 
     my %if;
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $port = $i_descr->{$iid};
         next unless defined $port;
 
-        $port =~ s/\./\//g if( $port =~ /\d+\.\d+$/);
+        $port =~ s/\./\//g if ( $port =~ /\d+\.\d+$/ );
         $port =~ s/[^\d\/,()\w]+//gi;
-    
+
         $if{$iid} = $port;
     }
 
-    return \%if
+    return \%if;
 }
 
 1;
@@ -150,26 +206,27 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::C2900 - SNMP Interface to Cisco Catalyst 2900 Switches running IOS
+SNMP::Info::Layer2::C2900 - SNMP Interface to Cisco Catalyst 2900 Switches
+running IOS
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $c2900 = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 2
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $c2900->class();
+ my $class = $c2900->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
@@ -177,8 +234,8 @@ Max Baker (C<max@warped.org>)
 Provides abstraction to the configuration information obtainable from a 
 C2900 device through SNMP. 
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $c2900 = new SNMP::Info::Layer2::C2900(...);
 
@@ -186,28 +243,40 @@ a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer2
-
 =item SNMP::Info::CiscoVTP
 
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::Layer2
+
 =back
 
 =head2 Required MIBs
 
 =over
 
-=item CISCO-C2900-MIB
+=item F<CISCO-C2900-MIB>
 
 Part of the v2 MIBs from Cisco.
 
-=item Inherited Classes' MIBs
-
-See SNMP::Info::Layer2 for its own MIB requirements.
-
-See SNMP::Info::CiscoVTP for its own MIB requirements.
-
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -218,19 +287,35 @@ These are methods that return scalar value from SNMP
 
 =item $c2900->vendor()
 
-    Returns 'cisco' :)
+Returns 'cisco' :)
+
+=item $c2900->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
 
 =back
 
+=head2 Globals imported from SNMP::Info::CiscoVTP
+
+See L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
 =head2 Globals imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in SNMP::Info::CiscoVTP for details.
-
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -241,68 +326,118 @@ to a hash.
 
 =item $c2900->interfaces()
 
-    Returns reference to the map between IID and physical Port.
+Returns reference to the map between IID and physical Port.
 
-    On the 2900 devices i_name isn't reliable, so we override to just the description.
+On the 2900 devices i_name isn't reliable, so we override to just the
+description.
 
-    Next all dots are changed for forward slashes so that the physical port name 
-    is the same as the broadcasted CDP port name. 
-        (Ethernet0.1 -> Ethernet0/1)
+Next all dots are changed for forward slashes so that the physical port name 
+is the same as the broad-casted CDP port name. 
+    (Ethernet0.1 -> Ethernet0/1)
 
-    Also, any weird characters are removed, as I saw a few pop up.
+Also, any weird characters are removed, as I saw a few pop up.
 
 =item $c2900->i_duplex()
 
-    Returns reference to map of IIDs to current link duplex
+Returns reference to map of IIDs to current link duplex
 
-    Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex;
+Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex()
 
 =item $c2900->i_duplex_admin()
 
-    Returns reference to hash of IIDs to admin duplex setting
-    
-    Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex_admin;
-    
+Returns reference to hash of IIDs to admin duplex setting
+
+Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex_admin()
 
 =back
 
-=head2 C2900-MIB Port Entry Table 
+=head2 F<C2900-MIB> Port Entry Table 
 
 =over
 
 =item $c2900->c2900_p_index()
 
-    Maps the Switch Port Table to the IID
+Maps the Switch Port Table to the IID
 
-    B<c2900PortIfIndex>
+(C<c2900PortIfIndex>)
 
 =item $c2900->c2900_p_duplex()
 
-    Gives Port Duplex Info
+Gives Port Duplex Info
 
-    B<c2900PortDuplexStatus>
+(C<c2900PortDuplexStatus>)
 
 =item $c2900->c2900_p_duplex_admin()
 
-    Gives admin setting for Duplex Info
-
-    B<c2900PortDuplexState>
+Gives admin setting for Duplex Info
 
+(C<c2900PortDuplexState>)
 
 =item $c2900->c2900_p_speed_admin()
 
-    Gives Admin speed of port 
+Gives Admin speed of port 
 
-    B<c2900PortAdminSpeed>
+(C<c2900PortAdminSpeed>)
 
 =back
 
-=head2 Table Methods imported from SNMP::Info::Layer2
-
-See documentation in SNMP::Info::Layer2 for details.
-
 =head2 Table Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head1 SET METHODS
+
+These are methods that provide SNMP set functionality for overridden methods
+or provide a simpler interface to complex set operations.  See
+L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
+operations. 
+
+=over
+
+=item $c2900->set_i_speed_admin(speed, ifIndex)
+
+Sets port speed, must be supplied with speed and port C<ifIndex>
+
+Speed choices are 'auto', '10', '100'
+
+Crosses $c2900->c2900_p_index() with $c2900->c2900_p_speed_admin() to utilize
+port C<ifIndex>.
+
+    Example:
+    my %if_map = reverse %{$c2900->interfaces()};
+    $c2900->set_i_speed_admin('auto', $if_map{'FastEthernet0/1'}) 
+        or die "Couldn't change port speed. ",$c2900->error(1);
+
+=item $c2900->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>
+
+Speed choices are 'auto', 'half', 'full'
+
+Crosses $c2900->c2900_p_index() with $c2900->c2900_p_duplex_admin() to utilize
+port C<ifIndex>.
+
+    Example:
+    my %if_map = reverse %{$c2900->interfaces()};
+    $c2900->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
+        or die "Couldn't change port duplex. ",$c2900->error(1);
+
+=back
 
 =cut

Info/Layer2/Catalyst.pm

@@ -1,77 +1,82 @@
 # SNMP::Info::Layer2::Catalyst
-# Max Baker <max@warped.org>
+# $Id$
 #
 # Copyright (c) 2002,2003 Regents of the University of California
-# Copyright (c) 2003,2004 Max Baker changes from version 0.8 and beyond
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Catalyst;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
-use SNMP::Info::Layer2;
-use SNMP::Info::CiscoVTP;
 use SNMP::Info::CiscoStack;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::Layer2;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
-@SNMP::Info::Layer2::Catalyst::ISA = qw/SNMP::Info::CiscoStack SNMP::Info::Layer2 
-                                        SNMP::Info::CiscoVTP Exporter/;
+@SNMP::Info::Layer2::Catalyst::ISA
+    = qw/SNMP::Info::CiscoStack SNMP::Info::CiscoVTP
+    SNMP::Info::CDP SNMP::Info::CiscoStats
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::Catalyst::EXPORT_OK = qw//;
 
-$DEBUG=0;
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
 
-%MIBS =    ( %SNMP::Info::Layer2::MIBS, 
-             %SNMP::Info::CiscoVTP::MIBS,
-             %SNMP::Info::CiscoStack::MIBS,
-           );
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoStats::MIBS, %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,   %SNMP::Info::CiscoStack::MIBS,
+);
 
 %GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-            %SNMP::Info::CiscoStack::GLOBALS,
-           );
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    %SNMP::Info::CiscoStack::GLOBALS,
+);
 
-%FUNCS =   (
-            %SNMP::Info::Layer2::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-            %SNMP::Info::CiscoStack::FUNCS,
-           );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS, %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,   %SNMP::Info::CiscoStack::FUNCS,
+);
 
-%MUNGE =   (
-            %SNMP::Info::Layer2::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-            %SNMP::Info::CiscoStack::MUNGE,
-           );
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE, %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoVTP::MUNGE,   %SNMP::Info::CiscoStack::MUNGE,
+);
 
 # Overidden Methods
 
@@ -82,9 +87,9 @@ sub i_physical {
     my $p_port = $cat->p_port();
 
     my %i_physical;
-    foreach my $port (keys %$p_port) {
+    foreach my $port ( keys %$p_port ) {
         my $iid = $p_port->{$port};
-        $i_physical{$iid} = 1;  
+        $i_physical{$iid} = 1;
     }
     return \%i_physical;
 }
@@ -98,20 +103,74 @@ sub os {
 }
 
 sub os_ver {
-    my $cat = shift;
+    my $cat    = shift;
     my $os_ver = $cat->SUPER::os_ver();
     return $os_ver if defined $os_ver;
 
     my $m_swver = $cat->m_swver();
-    return undef unless defined $m_swver;
+    return unless defined $m_swver;
 
     # assume .1 entry is the chassis and the sw version we want.
     return $m_swver->{1} if defined $m_swver->{1};
-    return undef;
+    return;
+}
+
+# Workaround for incomplete bp_index
+sub bp_index {
+    my $cat     = shift;
+    my $p_index = $cat->p_port();
+    my $b_index = $cat->p_oidx();
+
+    my %bp_index;
+    foreach my $iid ( keys %$p_index ) {
+        my $ifidx = $p_index->{$iid};
+        next unless defined $ifidx;
+        my $bpidx = $b_index->{$iid} || 0;
+
+        $bp_index{$bpidx} = $ifidx;
+    }
+    return \%bp_index;
 }
 
 sub cisco_comm_indexing {
-    1;
+    return 1;
+}
+
+sub interfaces {
+    my $cat     = shift;
+    my $partial = shift;
+
+    my $i_index   = $cat->i_index($partial);
+    my $portnames = $cat->p_port() || {};
+    my %portmap   = reverse %$portnames;
+
+    my %interfaces = ();
+    foreach my $iid ( keys %$i_index ) {
+        next unless defined $iid;
+        my $if   = $i_index->{$iid};
+        $if =~ s/\./\// if $if;
+        my $port = $portmap{$iid};
+        $port =~ s/\./\// if $port;
+        $interfaces{$iid} = $port || $if;
+    }
+    return \%interfaces;
+}
+
+sub i_name {
+    my $cat     = shift;
+    my $partial = shift;
+
+    my $p_port = $cat->p_port() || {};
+    my $p_name = $cat->p_name() || {};
+
+    my %i_name;
+    foreach my $port ( keys %$p_name ) {
+        my $iid = $p_port->{$port};
+        next unless defined $iid;
+        next if ( defined $partial and $iid !~ /^$partial$/ );
+        $i_name{$iid} = $p_name->{$port};
+    }
+    return \%i_name;
 }
 
 1;
@@ -119,11 +178,12 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Catalyst - Perl5 Interface to Cisco Catalyst 5000 series devices.
+SNMP::Info::Layer2::Catalyst - SNMP Interface to Cisco Catalyst devices
+running Catalyst OS.
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -131,7 +191,6 @@ Max Baker (C<max@warped.org>)
  my $cat = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -143,21 +202,25 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-SNMP::Info subclass to provide information for Cisco Catalyst 5000 series switches running CatOS.
+SNMP::Info subclass to provide information for Cisco Catalyst series switches
+running CatOS.
 
-This subclass is not for all devices that have the name Catalyst.  Note that some Catalyst
-switches run IOS, like the 2900 and 3550 families.  Cisco Catalyst 1900 switches use their
-own MIB and have a separate subclass.  Use the method above to have SNMP::Info determine the
-appropriate subclass before using this class directly.
+This class includes the Catalyst 2920, 4000, 5000, 6000 (hybrid mode)
+families.
 
-This class includes the Catalyst 2950 series devices, which fall under the 
-Catalyst 5000 family.
+This subclass is not for all devices that have the name Catalyst.  Note that
+some Catalyst switches run IOS, like the 2900 and 3550 families.  Cisco
+Catalyst 1900 switches use their own MIB and have a separate subclass.  Use
+the method above to have SNMP::Info determine the appropriate subclass before
+using this class directly.
 
-Note:  Some older Catalyst switches will only talk SNMP version 1.  Some newer ones will not
-return all their data if connected via Version 1.
+See SNMP::Info::device_type() for specifics.
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+Note:  Some older Catalyst switches will only talk SNMP version 1.  Some
+newer ones will not return all their data if connected via Version 1.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $cat = new SNMP::Info::Layer2::Catalyst(...);
 
@@ -165,11 +228,17 @@ a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer2
+=item SNMP::Info::CiscoStack
 
 =item SNMP::Info::CiscoVTP
 
-=item SNMP::Info::CiscoStack
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::Layer2
 
 =back
 
@@ -179,11 +248,18 @@ a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See SNMP::Info::Layer2 for its own MIB requirements.
+See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoVTP for its own MIB requirements.
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoStack for its own MIB requirements.
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -208,35 +284,93 @@ it grabs $cat->m_swver()->{1} and uses that.
 
 Returns 'cisco'
 
+=item $cat->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
 =back
 
-=head2 Globals imported from SNMP::Info::Layer2
-
-See documentation in SNMP::Info::Layer2 for details.
-
-=head2 Global Methods imported from SNMP::Info::CiscoVTP
-
-See documentation in SNMP::Info::CiscoVTP for details.
-
 =head2 Global Methods imported from SNMP::Info::CiscoStack
 
-See documentation in SNMP::Info::CiscoStack for details.
+See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head2 Globals imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
+=head2 Overrides
+
+=over
+
+=item $cat->interfaces()
+
+Returns the map between SNMP Interface Identifier (iid) and physical port
+name. 
+
+=item $cat->i_name()
+
+Returns reference to hash of iid to human set name. 
+
+C<portName>
+
+=item $cat->i_physical()
+
+Returns a map to IID for ports that are physical ports, not vlans, etc.
+
+=item $cat->bp_index()
+
+Returns reference to hash of bridge port table entries map back to interface
+identifier (iid)
+
+Crosses (C<portCrossIndex>) to (C<portIfIndex>) since some devices seem to
+have problems with F<BRIDGE-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::CiscoStack
+
+See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
+
 =head2 Table Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
 
 =head2 Table Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
-
-=head2 Table Methods imported from SNMP::Info::Layer2::CiscoSTack
-
-See documentation in SNMP::Info::Layer2::CiscoStack for details.
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/Centillion.pm

@@ -1,96 +1,102 @@
 # SNMP::Info::Layer2::Centillion
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
 #
-# Redistribution and use in source and binary forms, with or without 
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Centillion;
-$VERSION = 0.9;
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 use SNMP::Info::Bridge;
 use SNMP::Info::NortelStack;
 use SNMP::Info::SONMP;
 
-@SNMP::Info::Layer2::Centillion::ISA = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::NortelStack SNMP::Info::SONMP Exporter/;
+@SNMP::Info::Layer2::Centillion::ISA
+    = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::NortelStack SNMP::Info::SONMP Exporter/;
 @SNMP::Info::Layer2::Centillion::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-%MIBS    = (
-            %SNMP::Info::MIBS,
-            %SNMP::Info::Bridge::MIBS,
-            %SNMP::Info::NortelStack::MIBS,
-            %SNMP::Info::SONMP::MIBS,
-            'CENTILLION-DOT3-EXTENSIONS-MIB' => 'cnDot3ExtnTable',
-            'S5-COMMON-STATS-MIB'            => 's5CmStat',
-            'CENTILLION-VLAN-MIB'            => 'cnVlanENETMgt',
-            'CENTILLION-CONFIG-MIB'          => 'sysTFTPStart',
-            );
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::MIBS,
+    %SNMP::Info::Bridge::MIBS,
+    %SNMP::Info::NortelStack::MIBS,
+    %SNMP::Info::SONMP::MIBS,
+    'CENTILLION-DOT3-EXTENSIONS-MIB' => 'cnDot3ExtnTable',
+    'S5-COMMON-STATS-MIB'            => 's5CmStat',
+    'CENTILLION-VLAN-MIB'            => 'cnVlanENETMgt',
+    'CENTILLION-CONFIG-MIB'          => 'sysTFTPStart',
+);
 
 %GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::NortelStack::GLOBALS,
-            %SNMP::Info::SONMP::GLOBALS,
-            'tftp_action'  => 'sysTFTPStart',
-            'tftp_host'    => 'sysTFTPIpAddress',
-            'tftp_file'    => 'sysTFTPFileName',
-            'tftp_type'    => 'sysTFTPFileType',
-            'tftp_result'  => 'sysTFTPResult',
-            );
+    %SNMP::Info::GLOBALS,
+    %SNMP::Info::Bridge::GLOBALS,
+    %SNMP::Info::NortelStack::GLOBALS,
+    %SNMP::Info::SONMP::GLOBALS,
+    'tftp_action' => 'sysTFTPStart',
+    'tftp_host'   => 'sysTFTPIpAddress',
+    'tftp_file'   => 'sysTFTPFileName',
+    'tftp_type'   => 'sysTFTPFileType',
+    'tftp_result' => 'sysTFTPResult',
+);
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::NortelStack::FUNCS,
-            %SNMP::Info::SONMP::FUNCS,
-        # CENTILLION-DOT3-EXTENSIONS-MIB::cnDot3ExtnTable
-            'centillion_p_index'        => 'cnDot3ExtnIfIndex',
-            'centillion_p_duplex'       => 'cnDot3ExtnIfOperConnectionType',
-            'centillion_p_duplex_admin' => 'cnDot3ExtnIfAdminConnectionType',
-        # S5-COMMON-STATS-MIB::s5CmSNodeTable
-            'fw_mac'     => 's5CmSNodeMacAddr',
-            'fw_port'    => 's5CmSNodeIfIndx',
-        # CENTILLION-VLAN-MIB::cnVlanPortMemberTable
-            'centillion_i_vlan_index'    => 'cnVlanPortMemberIfIndex',
-            'centillion_i_vlan'        => 'cnVlanPortMemberVID',
-            'centillion_i_vlan_type'    => 'cnVlanPortMemberIngressType',        
-            );
+%FUNCS = (
+    %SNMP::Info::FUNCS,
+    %SNMP::Info::Bridge::FUNCS,
+    %SNMP::Info::NortelStack::FUNCS,
+    %SNMP::Info::SONMP::FUNCS,
 
-%MUNGE   = (
-            # Inherit all the built in munging
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::NortelStack::MUNGE,
-            %SNMP::Info::SONMP::MUNGE,
-            );
+    # CENTILLION-DOT3-EXTENSIONS-MIB::cnDot3ExtnTable
+    'centillion_p_index'        => 'cnDot3ExtnIfIndex',
+    'centillion_p_duplex'       => 'cnDot3ExtnIfOperConnectionType',
+    'centillion_p_duplex_admin' => 'cnDot3ExtnIfAdminConnectionType',
+
+    # S5-COMMON-STATS-MIB::s5CmSNodeTable
+    'fw_mac'  => 's5CmSNodeMacAddr',
+    'fw_port' => 's5CmSNodeIfIndx',
+
+    # CENTILLION-VLAN-MIB::cnVlanPortMemberTable
+    'centillion_i_vlan_index' => 'cnVlanPortMemberIfIndex',
+    'centillion_i_vlan'       => 'cnVlanPortMemberVID',
+    'centillion_i_vlan_type'  => 'cnVlanPortMemberIngressType',
+);
+
+%MUNGE = (
+
+    # Inherit all the built in munging
+    %SNMP::Info::MUNGE,
+    %SNMP::Info::Bridge::MUNGE,
+    %SNMP::Info::NortelStack::MUNGE,
+    %SNMP::Info::SONMP::MUNGE,
+);
 
 sub os {
     return 'centillion';
@@ -102,12 +108,13 @@ sub vendor {
 
 sub i_ignore {
     my $centillion = shift;
-    my $descr = $centillion->i_description();
+    my $descr      = $centillion->i_description();
 
     my %i_ignore;
-    foreach my $if (keys %$descr){
+    foreach my $if ( keys %$descr ) {
         my $type = $descr->{$if};
-      # Skip virtual interfaces  
+
+        # Skip virtual interfaces
         $i_ignore{$if}++ if $type =~ /(VE|VID|vc|lp)/i;
     }
     return \%i_ignore;
@@ -115,24 +122,25 @@ sub i_ignore {
 
 sub interfaces {
     my $centillion = shift;
-    my $i_index = $centillion->i_index();
-    my $i_descr = $centillion->i_description();
+    my $i_index    = $centillion->i_index();
+    my $i_descr    = $centillion->i_description();
 
     my %if;
-    foreach my $iid (keys %$i_index){
+    foreach my $iid ( keys %$i_index ) {
         my $index = $i_index->{$iid};
         next unless defined $index;
-      my $descr = $i_descr->{$iid};
-      # Skip ATM and virtual interfaces
-      next if $descr =~ /(VE|VID|vc|lp)/i;
+        my $descr = $i_descr->{$iid};
 
-      # Index numbers are deterministic slot * 256 + port
-    my $port = $index % 256;
-        my $slot = int($index / 256);
+        # Skip ATM and virtual interfaces
+        next if $descr =~ /(VE|VID|vc|lp)/i;
+
+        # Index numbers are deterministic slot * 256 + port
+        my $port     = $index % 256;
+        my $slot     = int( $index / 256 );
         my $slotport = "$slot.$port";
 
-    $slotport = "$descr" if $descr =~ /(mcp)/i;
-    
+        $slotport = "$descr" if $descr =~ /(mcp)/i;
+
         $if{$index} = $slotport;
     }
 
@@ -141,89 +149,89 @@ sub interfaces {
 
 sub i_duplex {
     my $centillion = shift;
-    
+
     my $port_index  = $centillion->centillion_p_index();
     my $port_duplex = $centillion->centillion_p_duplex();
 
     my %i_duplex;
-    foreach my $iid (keys %$port_index){
+    foreach my $iid ( keys %$port_index ) {
         my $index = $port_index->{$iid};
         next unless defined $index;
         my $duplex = $port_duplex->{$iid};
-        next unless defined $duplex; 
-    
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /half/i;
         $duplex = 'full' if $duplex =~ /full/i;
-        $i_duplex{$index}=$duplex; 
+        $i_duplex{$index} = $duplex;
     }
     return \%i_duplex;
 }
 
 sub i_duplex_admin {
     my $centillion = shift;
-    
+
     my $port_index = $centillion->centillion_p_index();
     my $port_admin = $centillion->centillion_p_duplex_admin();
 
     my %i_duplex_admin;
-    foreach my $iid (keys %$port_index){
+    foreach my $iid ( keys %$port_index ) {
         my $index = $port_index->{$iid};
         next unless defined $index;
         my $duplex = $port_admin->{$iid};
-        next unless defined $duplex; 
-    
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /half/i;
         $duplex = 'full' if $duplex =~ /full/i;
         $duplex = 'auto' if $duplex =~ /auto/i;
-        $i_duplex_admin{$index}=$duplex; 
+        $i_duplex_admin{$index} = $duplex;
     }
     return \%i_duplex_admin;
 }
 
 sub i_vlan {
     my $centillion = shift;
-    
+
     my $cn_vlan_index = $centillion->centillion_i_vlan_index();
-    my $cn_vlan = $centillion->centillion_i_vlan();
+    my $cn_vlan       = $centillion->centillion_i_vlan();
 
     my %i_vlan;
-    foreach my $iid (keys %$cn_vlan_index){
+    foreach my $iid ( keys %$cn_vlan_index ) {
         my $index = $cn_vlan_index->{$iid};
         next unless defined $index;
         my $vlan = $cn_vlan->{$iid};
-        next unless defined $vlan; 
-    
-        $i_vlan{$index}=$vlan; 
+        next unless defined $vlan;
+
+        $i_vlan{$index} = $vlan;
     }
     return \%i_vlan;
 }
 
 sub model {
     my $centillion = shift;
-    my $id = $centillion->id();
-    return undef unless defined $id;
+    my $id         = $centillion->id();
+    return unless defined $id;
     my $model = &SNMP::translateObj($id);
     return $id unless defined $model;
     $model =~ s/^sreg-//i;
 
-    return '5000BH' if ($model =~ /5000BH/);
-    return '5005BH' if ($model =~ /5005BH/);
-    return 'C100' if ($model =~ /Centillion100/);
-    return 'C50N' if ($model =~ /Centillion50N/);
-    return 'C50T' if ($model =~ /Centillion50T/);
+    return '5000BH' if ( $model =~ /5000BH/ );
+    return '5005BH' if ( $model =~ /5005BH/ );
+    return 'C100'   if ( $model =~ /Centillion100/ );
+    return 'C50N'   if ( $model =~ /Centillion50N/ );
+    return 'C50T'   if ( $model =~ /Centillion50T/ );
     return $model;
 }
 
 sub bp_index {
     my $centillion = shift;
-    my $index = $centillion->fw_port();
+    my $index      = $centillion->fw_port();
 
     my %bp_index;
-    foreach my $iid (keys %$index){
+    foreach my $iid ( keys %$index ) {
         my $b_index = $index->{$iid};
         next unless defined $b_index;
 
-    #Index value is the same as ifIndex    
+        #Index value is the same as ifIndex
         $bp_index{$b_index} = $b_index;
     }
 
@@ -238,17 +246,17 @@ sub slot_offset {
     return 0;
 }
 
-
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::Centillion - SNMP Interface to Nortel Centillion based ATM Switches
+SNMP::Info::Layer2::Centillion - SNMP Interface to Nortel Centillion based
+ATM Switches
 
 =head1 AUTHOR
 
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -256,7 +264,6 @@ Eric Miller (C<eric@jeneric.org>)
  my $centillion = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -271,8 +278,8 @@ Eric Miller (C<eric@jeneric.org>)
 Provides abstraction to the configuration information obtainable from a 
 Centillion device through SNMP. 
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $centillion = new SNMP::Info::Layer2::centillion(...);
  
@@ -297,35 +304,26 @@ than bridge group based.
 
 =over
 
-=item CENTILLION-DOT3-EXTENSIONS-MIB
+=item F<CENTILLION-DOT3-EXTENSIONS-MIB>
 
-=item S5-COMMON-STATS-MIB
+=item F<S5-COMMON-STATS-MIB>
 
-=item CENTILLION-VLAN-MIB
+=item F<CENTILLION-VLAN-MIB>
 
-=item CENTILLION-CONFIG-MIB
+=item F<CENTILLION-CONFIG-MIB>
 
 =item Inherited Classes' MIBs
 
-See SNMP::Info for its own MIB requirements.
+See L<SNMP::Info/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::Bridge for its own MIB requirements.
+See L<SNMP::Info::Bridge/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::NortelStack for its own MIB requirements.
+See L<SNMP::Info::NortelStack/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::SONMP for its own MIB requirements.
+See L<SNMP::Info::SONMP/"Required MIBs"> for its own MIB requirements.
 
 =back
 
-MIBs can be found on the CD that came with your product.
-
-Or, they can be downloaded directly from Nortel Networks regardless of support
-contract status.
-
-Go to http://www.nortelnetworks.com Techninal Support, Browse Technical Support,
-Select by Product Families, Centillion, Centillion C100-C50 ATM Speed Modules,
-Software.  Filter on mibs and download the latest version's archive.
-
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -338,10 +336,10 @@ Returns 'Nortel'
 
 =item $centillion->model()
 
-Cross references $centillion->id() to the SYNOPTICS-MIB and returns
+Cross references $centillion->id() to the F<SYNOPTICS-MIB> and returns
 the results.
 
-Removes sreg- from the model name
+Removes C<sreg-> from the model name
 
 =item $centillion->os()
 
@@ -349,23 +347,23 @@ Returns 'Centillion'
 
 =item $centillion->tftp_action()
 
-(B<sysTFTPStart>)
+(C<sysTFTPStart>)
 
 =item $centillion->tftp_host()
 
-(B<sysTFTPIpAddress>)
+(C<sysTFTPIpAddress>)
 
 =item $centillion->tftp_file()
 
-(B<sysTFTPFileName>)
+(C<sysTFTPFileName>)
 
 =item $centillion->tftp_type()
 
-(B<sysTFTPFileType>)
+(C<sysTFTPFileType>)
 
 =item $centillion->tftp_result()
 
-(B<sysTFTPResult>)
+(C<sysTFTPResult>)
 
 =back
 
@@ -375,7 +373,8 @@ Returns 'Centillion'
 
 =item $centillion->layers()
 
-Returns 00000011.  Class emulates Layer 2 functionality through proprietary MIBs.
+Returns 00000011.  Class emulates Layer 2 functionality through proprietary
+MIBs.
 
 =item  $centillion->index_factor()
 
@@ -391,21 +390,21 @@ start at 0.  Returns 0.
 
 =head2 Globals imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::Bridge
 
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::Bridge/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::NortelStack
 
-See documentation in SNMP::Info::NortelStack for details.
+See documentation in L<SNMP::Info::NortelStack/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info::SONMP for details.
+See documentation in L<SNMP::Info::SONMP/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -418,7 +417,8 @@ to a hash.
 
     Returns reference to the map between IID and physical Port.
 
-    Slot and port numbers on the Passport switches are determined by the formula:
+    Slot and port numbers on the Passport switches are determined by the
+    formula:
       port = index % 256
       slot = int(index / 256)
  
@@ -438,23 +438,23 @@ Returns reference to hash of IIDs to ignore.
 
 =item $centillion->fw_mac()
 
-(B<s5CmSNodeMacAddr>)
+(C<s5CmSNodeMacAddr>)
 
 =item $centillion->fw_port()
 
-(B<s5CmSNodeIfIndx>)
+(C<s5CmSNodeIfIndx>)
 
 =item $centillion->bp_index()
 
-Returns a mapping between ifIndex and the Bridge Table.
+Returns a mapping between C<ifIndex> and the Bridge Table.
 
 =item $centillion->i_vlan()
 
-Returns a mapping between ifIndex and the VLAN.
+Returns a mapping between C<ifIndex> and the VLAN.
 
 =back
 
-=head2 Centillion 802.3 Extension Table (B<cnDot3ExtnTable>)
+=head2 Centillion 802.3 Extension Table (C<cnDot3ExtnTable>)
 
 =over
 
@@ -462,23 +462,23 @@ Returns a mapping between ifIndex and the VLAN.
 
 Returns reference to hash.  Maps table IIDs to Interface IIDs 
 
-(B<cnDot3ExtnIfIndex>)
+(C<cnDot3ExtnIfIndex>)
 
 =item $centillion->centillion_p_duplex()
 
 Returns reference to hash.  Maps port operational duplexes to IIDs 
 
-(B<cnDot3ExtnIfOperConnectionType>)
+(C<cnDot3ExtnIfOperConnectionType>)
 
 =item $centillion->rc_centillion_p_duplex_admin()
 
 Returns reference to hash.  Maps port admin duplexes to IIDs
 
-(B<cnDot3ExtnIfAdminConnectionType>)
+(C<cnDot3ExtnIfAdminConnectionType>)
 
 =back
 
-=head2 Centillion VLAN Table (B<cnVlanPortMemberTable>)
+=head2 Centillion VLAN Table (C<cnVlanPortMemberTable>)
 
 =over
 
@@ -486,36 +486,36 @@ Returns reference to hash.  Maps port admin duplexes to IIDs
 
 Returns reference to hash.  Key: Table entry, Value: Index 
 
-(B<cnVlanPortMemberIfIndex>)
+(C<cnVlanPortMemberIfIndex>)
 
 =item $centillion->centillion_i_vlan()
 
 Returns reference to hash.  Key: Table entry, Value: VLAN ID 
 
-(B<cnVlanPortMemberVID>)
+(C<cnVlanPortMemberVID>)
 
 =item $centillion->centillion_i_vlan_type()
 
 Returns reference to hash.  Key: Table entry, Value: VLAN Type 
 
-(B<cnVlanPortMemberIngressType>)
+(C<cnVlanPortMemberIngressType>)
 
 =back
 
 =head2 Table Methods imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::Bridge
 
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::NortelStack
 
-See documentation in SNMP::Info::NortelStack for details.
+See documentation in L<SNMP::Info::NortelStack/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info::SONMP for details.
+See documentation in L<SNMP::Info::SONMP/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/Cisco.pm

@@ -0,0 +1,242 @@
+# SNMP::Info::Layer2::Cisco
+# $Id$
+#
+# Copyright (c) 2008 Max Baker
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::Cisco;
+
+use strict;
+use Exporter;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoRTT;
+use SNMP::Info::CiscoQOS;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::Layer2;
+
+@SNMP::Info::Layer2::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
+    SNMP::Info::CiscoRTT SNMP::Info::CiscoQOS
+    SNMP::Info::CiscoConfig SNMP::Info::Layer2
+    Exporter/;
+@SNMP::Info::Layer2::Cisco::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,     %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoQOS::MIBS,   %SNMP::Info::CiscoRTT::MIBS,
+    %SNMP::Info::CiscoImage::MIBS, %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,        %SNMP::Info::CiscoVTP::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,     %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoQOS::GLOBALS,   %SNMP::Info::CiscoRTT::GLOBALS,
+    %SNMP::Info::CiscoImage::GLOBALS, %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,        %SNMP::Info::CiscoVTP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,     %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoQOS::FUNCS,   %SNMP::Info::CiscoRTT::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS, %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,        %SNMP::Info::CiscoVTP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE,     %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoQOS::MUNGE,   %SNMP::Info::CiscoRTT::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE, %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,        %SNMP::Info::CiscoVTP::MUNGE,
+);
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
+that are not covered in other classes.
+
+=head1 AUTHOR
+
+Max Baker
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $cisco = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $cisco->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Generic Cisco Routers running IOS
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoImage
+
+=item SNMP::Info::CiscoRTT
+
+=item SNMP::Info::CiscoQOS
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::Layer2
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $cisco->vendor()
+
+    Returns 'cisco'
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/HP4000.pm

@@ -0,0 +1,724 @@
+# SNMP::Info::Layer2::HP4000 - SNMP Interface to older HP ProCurve Switches (1600, 2400, 2424M, 4000 and 8000)
+#
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
+#
+# Copyright (c) 2002,2003 Regents of the University of California
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::HP4000;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+use SNMP::Info::CDP;
+
+@SNMP::Info::Layer2::HP4000::ISA
+    = qw/SNMP::Info::Layer3 SNMP::Info::MAU
+    SNMP::Info::CDP Exporter/;
+@SNMP::Info::Layer2::HP4000::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %PORTSTAT %MODEL_MAP %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    'RFC1271-MIB'    => 'logDescription',
+    'HP-ICF-OID'     => 'hpSwitch4000',
+    'HP-VLAN'        => 'hpVlanMemberIndex',
+    'STATISTICS-MIB' => 'hpSwitchCpuStat',
+    'NETSWITCH-MIB'  => 'hpMsgBufFree',
+    'CONFIG-MIB'     => 'hpSwitchConfig',
+    'SEMI-MIB'       => 'hpHttpMgSerialNumber',
+    'HP-ICF-CHASSIS' => 'hpicfSensorObjectId',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    'serial1'      => 'hpHttpMgSerialNumber.0',
+    'hp_cpu'       => 'hpSwitchCpuStat.0',
+    'hp_mem_total' => 'hpGlobalMemTotalBytes.1',
+    'mem_free'     => 'hpGlobalMemFreeBytes.1',
+    'mem_used'     => 'hpGlobalMemAllocBytes.1',
+    'os_version'   => 'hpSwitchOsVersion.0',
+    'os_bin'       => 'hpSwitchRomVersion.0',
+    'mac'          => 'hpSwitchBaseMACAddress.0',
+    'hp_vlans'     => 'hpVlanNumber',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    'bp_index2' => 'dot1dBasePortIfIndex',
+    'i_type2'   => 'ifType',
+
+    # RFC1271
+    'l_descr' => 'logDescription',
+
+    # HP-VLAN-MIB
+    'hp_v_index'    => 'hpVlanDot1QID',
+    'hp_v_name'     => 'hpVlanIdentName',
+    'hp_v_state'    => 'hpVlanIdentState',
+    'hp_v_type'     => 'hpVlanIdentType',
+    'hp_v_status'   => 'hpVlanIdentStatus',
+    'hp_v_mac'      => 'hpVlanAddrPhysAddress',
+    'hp_v_if_index' => 'hpVlanMemberIndex',
+    'hp_v_if_tag'   => 'hpVlanMemberTagged2',
+
+    # CONFIG-MIB::hpSwitchPortTable
+    'hp_duplex'       => 'hpSwitchPortEtherMode',
+    'hp_duplex_admin' => 'hpSwitchPortFastEtherMode',
+    'vendor_i_type'   => 'hpSwitchPortType',
+
+    # HP-ICF-CHASSIS
+    'hp_s_oid'    => 'hpicfSensorObjectId',
+    'hp_s_name'   => 'hpicfSensorDescr',
+    'hp_s_status' => 'hpicfSensorStatus',
+);
+
+%MUNGE = (
+
+    # Inherit all the built in munging
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::CDP::MUNGE
+);
+
+%MODEL_MAP = (
+    'J4093A' => '2424M',
+    'J4110A' => '8000M',
+    'J4120A' => '1600M',
+    'J4121A' => '4000M',
+    'J4122A' => '2400M',
+    'J4122B' => '2424M',
+);
+
+# Method Overrides
+
+sub cpu {
+    my $hp = shift;
+    return $hp->hp_cpu();
+}
+
+sub mem_total {
+    my $hp = shift;
+    return $hp->hp_mem_total();
+}
+
+sub os {
+    return 'hp';
+}
+
+sub os_ver {
+    my $hp         = shift;
+    my $os_version = $hp->os_version();
+    return $os_version if defined $os_version;
+
+    # Some older ones don't have this value,so we cull it from the description
+    my $descr = $hp->description();
+    if ( $descr =~ m/revision ([A-Z]{1}\.\d{2}\.\d{2})/ ) {
+        return $1;
+    }
+    return;
+}
+
+# Lookup model number, and translate the part number to the common number
+sub model {
+    my $hp = shift;
+    my $id = $hp->id();
+    return unless defined $id;
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    $model =~ s/^hpswitch//i;
+
+    return defined $MODEL_MAP{$model} ? $MODEL_MAP{$model} : $model;
+}
+
+sub interfaces {
+    my $hp         = shift;
+    my $interfaces = $hp->i_index();
+    my $i_descr    = $hp->i_description();
+
+    my %if;
+    foreach my $iid ( keys %$interfaces ) {
+        my $descr = $i_descr->{$iid};
+        next unless defined $descr;
+        $if{$iid} = $descr if ( defined $descr and length $descr );
+    }
+
+    return \%if
+}
+
+sub i_name {
+    my $hp      = shift;
+    my $i_alias = $hp->i_alias();
+    my $e_name  = $hp->e_name();
+    my $e_port  = $hp->e_port();
+
+    my %i_name;
+
+    foreach my $port ( keys %$e_name ) {
+        my $iid = $e_port->{$port};
+        next unless defined $iid;
+        my $alias = $i_alias->{$iid};
+        next unless defined $iid;
+        $i_name{$iid} = $e_name->{$port};
+
+        # Check for alias
+        $i_name{$iid} = $alias if ( defined $alias and length($alias) );
+    }
+
+    return \%i_name;
+}
+
+sub i_duplex {
+    my $hp = shift;
+
+    return $hp->mau_i_duplex();
+}
+
+sub i_duplex_admin {
+    my $hp      = shift;
+    my $partial = shift;
+
+    # Try HP MIB first
+    my $hp_duplex = $hp->hp_duplex_admin($partial);
+    if ( defined $hp_duplex and scalar( keys %$hp_duplex ) ) {
+
+        my %i_duplex;
+        foreach my $if ( keys %$hp_duplex ) {
+            my $duplex = $hp_duplex->{$if};
+            next unless defined $duplex;
+
+            $duplex = 'half' if $duplex =~ /half/i;
+            $duplex = 'full' if $duplex =~ /full/i;
+            $duplex = 'auto' if $duplex =~ /auto/i;
+            $i_duplex{$if} = $duplex;
+        }
+        return \%i_duplex;
+    }
+    else {
+        return $hp->mau_i_duplex_admin();
+    }
+}
+
+sub vendor {
+    return 'hp';
+}
+
+sub log {
+    my $hp = shift;
+
+    my $log = $hp->l_descr();
+
+    my $logstring = undef;
+
+    foreach my $val ( values %$log ) {
+        next if $val =~ /^Link\s+(Up|Down)/;
+        $logstring .= "$val\n";
+    }
+
+    return $logstring;
+}
+
+sub slots {
+    my $hp = shift;
+
+    my $e_name = $hp->e_name();
+
+    return unless defined $e_name;
+
+    my $slots;
+    foreach my $slot ( keys %$e_name ) {
+        $slots++ if $e_name->{$slot} =~ /slot/i;
+    }
+
+    return $slots;
+}
+
+sub fan {
+    my $hp = shift;
+    return &_sensor( $hp, 'fan' );
+}
+
+sub ps1_status {
+    my $hp = shift;
+    return &_sensor( $hp, 'power', '^power supply 1' )
+        || &_sensor( $hp, 'power', '^power supply sensor' );
+}
+
+sub ps2_status {
+    my $hp = shift;
+    return &_sensor( $hp, 'power', '^power supply 2' )
+        || &_sensor( $hp, 'power', '^redundant' );
+}
+
+sub _sensor {
+    my $hp          = shift;
+    my $search_type = shift || 'fan';
+    my $search_name = shift || '';
+    my $hp_s_oid    = $hp->hp_s_oid();
+    my $result;
+    foreach my $sensor ( keys %$hp_s_oid ) {
+        my $sensortype = &SNMP::translateObj( $hp_s_oid->{$sensor} );
+        if ( $sensortype =~ /$search_type/i ) {
+            my $sensorname   = $hp->hp_s_name()->{$sensor};
+            my $sensorstatus = $hp->hp_s_status()->{$sensor};
+            if ( $sensorname =~ /$search_name/i ) {
+                $result = $sensorstatus;
+            }
+        }
+    }
+    return $result;
+}
+
+# Bridge MIB does not map Bridge Port to ifIndex correctly on older models, but Bridge Port equals ifIndex in these devices
+sub bp_index {
+    my $hp      = shift;
+    my $partial = shift;
+
+    my $if_index = $hp->i_index($partial);
+    my %mod_bp_index;
+    foreach my $iid ( keys %$if_index ) {
+        $mod_bp_index{$iid} = $iid;
+    }
+    return \%mod_bp_index;
+}
+
+# VLAN methods. Devices in this class use the proprietary HP-VLAN-MIB.
+
+sub v_index {
+    my $hp      = shift;
+    my $partial = shift;
+
+    return $hp->hp_v_index($partial);
+}
+
+sub v_name {
+    my $hp      = shift;
+    my $partial = shift;
+
+    return $hp->hp_v_name($partial);
+}
+
+sub i_vlan {
+    my $hp = shift;
+
+    # the hpvlanmembertagged2 table has an entry in the form of
+    #   vlan.interface = /untagged/no/tagged/auto
+    my $i_vlan      = {};
+    my $hp_v_index  = $hp->hp_v_index();
+    my $hp_v_if_tag = $hp->hp_v_if_tag();
+    foreach my $row ( keys %$hp_v_if_tag ) {
+        my ( $index, $if ) = split( /\./, $row );
+
+        my $tag  = $hp_v_if_tag->{$row};
+        my $vlan = $hp_v_index->{$index};
+
+        next unless ( defined $tag and $tag =~ /untagged/ );
+
+        $i_vlan->{$if} = $vlan if defined $vlan;
+    }
+
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $hp = shift;
+
+    my $i_vlan_membership = {};
+    my $hp_v_index        = $hp->hp_v_index();
+    my $hp_v_if_tag       = $hp->hp_v_if_tag();
+    foreach my $row ( keys %$hp_v_if_tag ) {
+        my ( $index, $if ) = split( /\./, $row );
+
+        my $tag  = $hp_v_if_tag->{$row};
+        my $vlan = $hp_v_index->{$index};
+
+        next unless ( defined $tag );
+        next if ( $tag eq 'no' );
+
+        push( @{ $i_vlan_membership->{$if} }, $vlan );
+    }
+
+    return $i_vlan_membership;
+}
+
+sub set_i_vlan {
+    my $hp = shift;
+    my $rv;
+
+    my $hp_v_index  = $hp->hp_v_index();
+    my $hp_v_if_tag = $hp->hp_v_if_tag();
+    if (defined $hp_v_index and scalar(keys %$hp_v_index)){
+        my $vlan = shift;
+        my $iid = shift;
+        my $old_untagged;
+        # Hash to lookup VLAN index of the VID (dot1q tag)
+        my %vl_trans = reverse %$hp_v_index;
+
+        # Translate the VLAN identifier (tag) value to the index used by the HP-VLAN MIB
+        my $vlan_index = $vl_trans{$vlan};
+        if (defined $vlan_index) {
+
+            # First, loop through table to determine current untagged vlan for the port we're about to change
+            foreach my $row (keys %$hp_v_if_tag){
+                my ($index,$if) = split(/\./,$row);
+                if ($if == $iid and $hp_v_if_tag->{$row} =~ /untagged/) {
+                    # Store the row information of the current untagged VLAN and temporarily set it to tagged
+                    $old_untagged = $row;
+                    $rv = $hp->set_hp_v_if_tag(1, $row);
+                    last;
+                }
+            }
+
+            # Then set our port untagged in the desired VLAN
+            my $rv = $hp->set_hp_v_if_tag(2, "$vlan_index.$iid");
+            if (defined $rv) {
+                # If vlan change is successful, remove VLAN that used to be untagged from the port
+                if (defined $old_untagged) {
+                    $rv = $hp->set_hp_v_if_tag(3, $old_untagged);
+                    $hp->error_throw("Error removing previous untagged vlan from port, should never happen...\n") unless defined $rv;
+                }
+            } else {
+                # If vlan change was not succesful, try to revert to the old situation.
+                if (defined $old_untagged) {
+                    $rv = $hp->set_hp_v_if_tag(2, $old_untagged) if defined $old_untagged;
+                    if (defined $rv) {
+                        $hp->error_throw("VLAN change failed, restored port to previous configuration.\n");
+                    } else {
+                        $hp->error_throw("VLAN change failed, unable to restore old configuration. Check device.\n");
+                    }
+                }
+            }
+        } else {
+            $hp->error_throw("Requested VLAN (VLAN ID: $vlan) not available on device.\n");
+        }
+    } else {
+        $hp->error_throw("Error retrieving VLAN information from device.\n");
+    }
+    return $rv;
+}
+
+sub set_i_vlan_tagged {
+    my $hp = shift;
+    my $vlan = shift;
+    my $iid = shift;
+    my $rv;
+
+    my $hp_v_index  = $hp->hp_v_index();
+    if (defined $hp_v_index and scalar(keys %$hp_v_index)){
+        # Hash to lookup VLAN index of the VID (dot1q tag)
+        my %vl_trans = reverse %$hp_v_index;
+
+        # Translate the VLAN identifier (tag) value to the index used by the HP-VLAN MIB
+        my $vlan_index = $vl_trans{$vlan};
+        if (defined $vlan_index) {
+            # Set our port tagged in the desired VLAN
+            $rv = $hp->set_hp_v_if_tag(1, "$vlan_index.$iid");
+        } else {
+            $hp->error_throw("Requested VLAN (VLAN ID: $vlan) not available on device.\n");
+        }
+    }
+    return $rv;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::HP4000 - SNMP Interface to older HP ProCurve Switches (1600, 2400, 2424M, 4000 and 8000)
+
+=head1 AUTHOR
+
+Max Baker
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $hp = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $hp->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+HP ProCurve Switch via SNMP. 
+
+Note:  Some HP Switches will connect via SNMP version 1, but a lot of config
+data will not be available.  Make sure you try and connect with Version 2
+first, and then fail back to version 1.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $hp = new SNMP::Info::Layer2::HP4000(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+
+=item SNMP::Info::MAU
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<RFC1271-MIB>
+
+Included in V2 mibs from Cisco
+
+=item F<HP-ICF-OID>
+
+=item F<HP-VLAN>
+
+(this MIB new with SNMP::Info 0.8)
+
+=item F<STATISTICS-MIB>
+
+=item F<NETSWITCH-MIB>
+
+=item F<CONFIG-MIB>
+
+=back
+
+The last five MIBs listed are from HP and can be found at
+L<http://www.hp.com/rnd/software> or
+L<http://www.hp.com/rnd/software/MIBs.htm>
+
+=head1 Change Log
+
+Version 0.4 - Removed F<ENTITY-MIB> e_*() methods to separate sub-class -
+SNMP::Info::Entity
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $hp->cpu()
+
+Returns CPU Utilization in percentage.
+
+=item $hp->log()
+
+Returns all the log entries from the switch's log that are not Link up or
+down messages.
+
+=item $hp->mem_free()
+
+Returns bytes of free memory
+
+=item $hp->mem_total()
+
+Return bytes of total memory
+
+=item $hp->mem_used()
+
+Returns bytes of used memory
+
+=item $hp->model()
+
+Returns the model number of the HP Switch.  Will translate between the HP Part
+number and the common model number with this map :
+
+ %MODEL_MAP = ( 
+                'J4093A' => '2424M',
+                'J4110A' => '8000M',
+                'J4120A' => '1600M',
+                'J4121A' => '4000M',
+                'J4122A' => '2400M',
+                'J4122B' => '2424M',
+                );
+
+=item $hp->os()
+
+Returns hp
+
+=item $hp->os_bin()
+
+C<hpSwitchRomVersion.0>
+
+=item $hp->os_ver()
+
+Tries to use os_version() and if that fails will try and cull the version from
+the description field.
+
+=item $hp->os_version()
+
+C<hpSwitchOsVersion.0>
+
+=item $hp->serial()
+
+Returns serial number if available through SNMP
+
+=item $hp->slots()
+
+Returns number of entries in $hp->e_name that have 'slot' in them.
+
+=item $hp->vendor()
+
+hp
+
+=item $hp->fan()
+
+Returns fan status
+
+=item $hp->ps1_status()
+
+Power supply 1 status
+
+=item $hp->ps2_status()
+
+Power supply 2 status
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $hp->interfaces() 
+
+Uses $hp->i_description()
+
+=item $hp->i_duplex()
+
+Returns reference to map of IIDs to current link duplex.
+
+=item $hp->i_duplex_admin()
+
+Returns reference to hash of IIDs to admin duplex setting.
+
+=item $hp->vendor_i_type()
+
+Returns reference to hash of IIDs to HP specific port type
+(C<hpSwitchPortType>).
+
+=item $hp->i_name()
+
+Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()
+
+=item $hp->i_vlan()
+
+Returns a mapping between C<ifIndex> and the PVID (default VLAN) or untagged
+port when using F<HP-VLAN>.
+
+=item $hp->i_vlan_membership()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the egress list for the port.
+It is the union of tagged, untagged, and auto ports.
+
+  Example:
+  my $interfaces = $hp->interfaces();
+  my $vlans      = $hp->i_vlan_membership();
+  
+  foreach my $iid (sort keys %$interfaces) {
+    my $port = $interfaces->{$iid};
+    my $vlan = join(',', sort(@{$vlans->{$iid}}));
+    print "Port: $port VLAN: $vlan\n";
+  }
+
+=item $hp->v_index()
+
+Returns VLAN IDs
+
+=item $hp->v_name()
+
+Returns VLAN names
+
+=item $hp->bp_index()
+
+Returns reference to hash of bridge port table entries map back to interface
+identifier (iid)
+
+Returns (C<ifIndex>) for both key and value for 1600, 2424, 4000, and 8000
+models since they seem to have problems with F<BRIDGE-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head1 SET METHODS
+
+These are methods that provide SNMP set functionality for overridden methods
+or provide a simpler interface to complex set operations.  See
+L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
+operations. 
+
+=over
+
+=item set_i_vlan()
+
+=item set_i_vlan_tagged()
+
+=back
+
+=cut

Info/Layer2/HPVC.pm

@@ -0,0 +1,209 @@
+# SNMP::Info::Layer2::HPVC - SNMP Interface to HP VirtualConnect Switches
+#
+# Copyright (c) 2011 Jeroen van Ingen
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::HPVC;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+
+@SNMP::Info::Layer2::HPVC::ISA
+    = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::HPVC::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    'HPVC-MIB'       => 'vcDomainName',
+    'CPQSINFO-MIB'   => 'cpqSiSysSerialNum',
+    'HPVCMODULE-MIB' => 'vcModuleDomainName',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+    'serial1'      => 'cpqSiSysSerialNum.0',
+    'os_ver'       => 'cpqHoSWRunningVersion.1',
+    'os_bin'       => 'cpqHoFwVerVersion.1',
+    'productname'  => 'cpqSiProductName.0',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    
+);
+
+%MUNGE = (
+    # Inherit all the built in munging
+    %SNMP::Info::Layer2::MUNGE,
+);
+
+
+# Method Overrides
+
+sub os {
+    return 'hpvc';
+}
+
+sub vendor {
+    return 'hp';
+}
+
+sub model {
+    my $hp = shift;
+    return $hp->productname();
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::HPVC - SNMP Interface to HP Virtual Connect Switches
+
+=head1 AUTHOR
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $hp = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $hp->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+HP Virtual Connect Switch via SNMP. 
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $hp = new SNMP::Info::Layer2::HPVC(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<HPVC-MIB>
+
+=item F<CPQSINFO-MIB>
+
+=item F<HPVCMODULE-MIB>
+
+=back
+
+All required MIBs can be found in the netdisco-mibs package.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $hp->os()
+
+Returns C<'hpvc'>
+
+=item $hp->os_bin()
+
+C<cpqHoFwVerVersion.1>
+
+=item $hp->os_ver()
+
+C<cpqHoSWRunningVersion.1>
+
+=item $hp->serial()
+
+C<cpqSiSysSerialNum.0>
+
+=item $hp->vendor()
+
+hp
+
+=item $hp->model()
+
+C<cpqSiProductName.0>
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head1 MUNGES
+
+=over
+
+=back
+
+=head1 SET METHODS
+
+These are methods that provide SNMP set functionality for overridden methods
+or provide a simpler interface to complex set operations.  See
+L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
+operations. 
+
+=cut

Info/Layer2/Kentrox.pm

@@ -0,0 +1,180 @@
+package SNMP::Info::Layer2::Kentrox;
+
+# Copyright (c) 2011 Netdisco Project
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+
+@SNMP::Info::Layer2::Kentrox::ISA       = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Kentrox::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS,
+        #from DATASMART-MIB
+        # MIB isn't yet in netdisco-mibs (not clear permission)
+        # ... when it is, this can change to dsScWyv
+        'ds_sysinfo' => '.1.3.6.1.4.1.181.2.2.12.15.0',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+);
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, );
+
+sub os {
+    return 'Kentrox';
+}
+
+sub os_ver {
+    my $dsver = shift;
+    my $descr = $dsver->description();
+    if ( $descr =~ /^\S+\s\S+\s\S+\s(\S+)/){
+        return $1;
+    }
+}
+
+sub serial {
+    my $dsserial = shift;
+    my $serial = $dsserial->ds_sysinfo();
+    if ( $serial =~ /SERIAL\s(\S+)/){
+        my $str = substr($1,8,10);
+        return $str;
+    }
+
+}
+sub vendor {
+    return 'Kentrox';
+}
+
+sub model {
+    my $dsmodel = shift;
+    my $descr = $dsmodel->description();
+    if ( $descr =~ /^(\S+\s\S+)/){
+        return $1;
+    }
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::Kentrox - SNMP Interface to L2 Kentrox DataSMART DSU/CSU
+
+=head1 AUTHOR
+
+phishphreek@gmail.com
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $router = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $router->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Kentrox DataSMART DSU/CSU
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $router->vendor()
+
+=item $router->os()
+
+=item $router->os_ver()
+
+=item $router->model()
+
+=item $router->serial()
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=cut
+

Info/Layer2/N2270.pm

@@ -0,0 +1,248 @@
+# SNMP::Info::Layer2::N2270
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::N2270;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+use SNMP::Info::Bridge;
+use SNMP::Info::SONMP;
+use SNMP::Info::Airespace;
+
+@SNMP::Info::Layer2::N2270::ISA
+    = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::SONMP SNMP::Info::Airespace Exporter/;
+@SNMP::Info::Layer2::N2270::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::MIBS,        %SNMP::Info::Bridge::MIBS,
+    %SNMP::Info::SONMP::MIBS, %SNMP::Info::Airespace::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::GLOBALS,        %SNMP::Info::Bridge::GLOBALS,
+    %SNMP::Info::SONMP::GLOBALS, %SNMP::Info::Airespace::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::FUNCS,        %SNMP::Info::Bridge::FUNCS,
+    %SNMP::Info::SONMP::FUNCS, %SNMP::Info::Airespace::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::MUNGE,        %SNMP::Info::Bridge::MUNGE,
+    %SNMP::Info::SONMP::MUNGE, %SNMP::Info::Airespace::MUNGE,
+);
+
+sub os {
+    return 'nortel';
+}
+
+sub vendor {
+    return 'nortel';
+}
+
+sub model {
+    my $n2270 = shift;
+    my $id    = $n2270->id();
+    return unless defined $id;
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+    $model =~ s/^sreg-WLANSecuritySwitch//i;
+
+    return $model;
+}
+
+sub index_factor {
+    return 256;
+}
+
+sub slot_offset {
+    return 0;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::N2270 - SNMP Interface to Nortel 2270 Series Wireless
+Switch
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+    #Let SNMP::Info determine the correct subclass for you.
+
+    my $n2270 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $n2270->class();
+    print " Using device sub class : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+Nortel 2270 Series Wireless Switch through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $n2270 = new SNMP::Info::Layer2::N2270(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info
+
+=item SNMP::Info::Bridge
+
+=item SNMP::Info::SONMP
+
+=item SNMP::Info::Airespace
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Bridge/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::SONMP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Airespace/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $n2270->vendor()
+
+Returns 'nortel'
+
+=item $n2270->os()
+
+Returns 'nortel'
+
+=item $n2270->model()
+
+Cross references $bayhub->id() to the F<SYNOPTICS-ROOT-MIB> and returns
+the results.
+
+Removes C<sreg-WLANSecuritySwitch> from the model name
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item  $bayhub->index_factor()
+
+Required by SNMP::Info::SONMP.  Number representing the number of ports
+reserved per slot within the device MIB.  Returns 256.
+
+=item $bayhub->slot_offset()
+
+Required by SNMP::Info::SONMP.  Offset if slot numbering does not
+start at 0.  Returns 0.
+
+=back
+
+=head2 Globals imported from SNMP::Info
+
+See documentation in L<SNMP::Info/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Bridge
+
+See documentation in L<SNMP::Info::Bridge/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::SONMP
+
+See documentation in L<SNMP::Info::SONMP/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Airespace
+
+See documentation in L<SNMP::Info::Airespace/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item None
+
+=back
+
+=head2 Table Methods imported from SNMP::Info
+
+See documentation in L<SNMP::Info/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Bridge
+
+See documentation in L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::SONMP
+
+See documentation in L<SNMP::Info::SONMP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Airespace
+
+See documentation in L<SNMP::Info::Airespace/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/NAP222x.pm

@@ -1,178 +1,156 @@
 # SNMP::Info::Layer2::NAP222x
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
 #
-# Redistribution and use in source and binary forms, with or without 
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::NAP222x;
-$VERSION = 0.9;
+
 use strict;
-
 use Exporter;
-use SNMP::Info;
-use SNMP::Info::Bridge;
 use SNMP::Info::SONMP;
+use SNMP::Info::IEEE802dot11;
+use SNMP::Info::Layer2;
 
-@SNMP::Info::Layer2::NAP222x::ISA = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::SONMP Exporter/;
+@SNMP::Info::Layer2::NAP222x::ISA
+    = qw/SNMP::Info::SONMP SNMP::Info::IEEE802dot11 SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::NAP222x::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-%MIBS    = (
-            %SNMP::Info::MIBS,
-            %SNMP::Info::Bridge::MIBS,
-            %SNMP::Info::SONMP::MIBS,
-            'NORTEL-WLAN-AP-MIB' => 'ntWlanSwHardwareVer',
-           );
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS, %SNMP::Info::IEEE802dot11::MIBS,
+    %SNMP::Info::SONMP::MIBS, 'NORTEL-WLAN-AP-MIB' => 'ntWlanSwHardwareVer',
+);
 
 %GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::SONMP::GLOBALS,
-            'nt_hw_ver'     => 'ntWlanSwHardwareVer',
-            'nt_fw_ver'     => 'ntWlanSwBootRomVer',
-            'nt_sw_ver'     => 'ntWlanSwOpCodeVer',
-            'nt_cc'         => 'ntWlanSwCountryCode',
-            'tftp_action'   => 'ntWlanTransferStart',
-            'tftp_host'     => 'ntWlanFileServer',
-            'tftp_file'     => 'ntWlanDestFile',
-            'tftp_type'     => 'ntWlanFileType',
-            'tftp_result'   => 'ntWlanFileTransferStatus',
-            'tftp_xtype'    => 'ntWlanTransferType',
-            'tftp_src_file' => 'ntWlanSrcFile',
-            'ftp_user'      => 'ntWlanUserName',
-            'ftp_pass'      => 'ntWlanPassword',
-           );
+    %SNMP::Info::Layer2::GLOBALS,
+    %SNMP::Info::IEEE802dot11::GLOBALS,
+    %SNMP::Info::SONMP::GLOBALS,
+    'nt_hw_ver'     => 'ntWlanSwHardwareVer',
+    'nt_fw_ver'     => 'ntWlanSwBootRomVer',
+    'nt_sw_ver'     => 'ntWlanSwOpCodeVer',
+    'nt_cc'         => 'ntWlanSwCountryCode',
+    'tftp_action'   => 'ntWlanTransferStart',
+    'tftp_host'     => 'ntWlanFileServer',
+    'tftp_file'     => 'ntWlanDestFile',
+    'tftp_type'     => 'ntWlanFileType',
+    'tftp_result'   => 'ntWlanFileTransferStatus',
+    'tftp_xtype'    => 'ntWlanTransferType',
+    'tftp_src_file' => 'ntWlanSrcFile',
+    'ftp_user'      => 'ntWlanUserName',
+    'ftp_pass'      => 'ntWlanPassword',
+);
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::SONMP::FUNCS,
-            'i_name2'             => 'ifName',
-            'bp_index_2'  => 'dot1dTpFdbPort',
-            # From ntWlanPortTable
-            'nt_prt_name'   => 'ntWlanPortName',
-            'nt_dpx_admin'  => 'ntWlanPortCapabilities',
-            'nt_auto'       => 'ntWlanPortAutonegotiation',
-            'nt_dpx'        => 'ntWlanPortSpeedDpxStatus',
-            );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
+    %SNMP::Info::SONMP::FUNCS,
 
-%MUNGE   = (
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::SONMP::MUNGE,
-            );
+    # From ntWlanPortTable
+    'nt_prt_name'  => 'ntWlanPortName',
+    'nt_dpx_admin' => 'ntWlanPortCapabilities',
+    'nt_auto'      => 'ntWlanPortAutonegotiation',
+    'nt_dpx'       => 'ntWlanPortSpeedDpxStatus',
+
+    # From ntWlanDot11PhyOperationTable
+    'nt_i_broadcast' => 'ntWlanDot11ClosedSystem',
+
+    # From ntWlanApVlanTable
+    'nt_i_vlan' => 'ntWlanApVlanDefaultVid',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer2::MUNGE, %SNMP::Info::IEEE802dot11::MUNGE,
+    %SNMP::Info::SONMP::MUNGE,
+);
 
 sub os {
     return 'nortel';
 }
 
-sub os_ver {
-    my $nap222x = shift;
-    my $ver = $nap222x->nt_sw_ver();
-    return undef unless defined $ver;
-    
-    if ($ver =~ m/(\d+\.\d+\.\d+\.\d+)/){
-        return $1;
-        }
-    return undef;
-}
-
 sub os_bin {
     my $nap222x = shift;
-    my $bin = $nap222x->nt_fw_ver();
-    return undef unless defined $bin;
+    my $bin     = $nap222x->nt_fw_ver();
+    return unless defined $bin;
 
-    if ($bin =~ m/(\d+\.\d+\.\d+)/){
+    if ( $bin =~ m/(\d+\.\d+\.\d+)/ ) {
         return $1;
-        }
-    return undef;
-}
-
-sub vendor {
-    return 'nortel';
+    }
+    return;
 }
 
 sub model {
     my $nap222x = shift;
-    my $descr = $nap222x->description();
-    return undef unless defined $descr;
+    my $descr   = $nap222x->description();
+    return unless defined $descr;
 
-    return 'AP-2220' if ($descr =~ /2220/);
-    return 'AP-2221' if ($descr =~ /2221/);
-    return 'AP-2225' if ($descr =~ /2225/);
-    return undef;
+    return 'AP-2220' if ( $descr =~ /2220/ );
+    return 'AP-2221' if ( $descr =~ /2221/ );
+    return;
 }
 
 sub mac {
     my $nap222x = shift;
-    my $i_mac = $nap222x->i_mac();
+    my $i_mac   = $nap222x->i_mac();
 
-# Return Interface MAC   
-    foreach my $entry (keys %$i_mac){
+    # Return Interface MAC
+    foreach my $entry ( keys %$i_mac ) {
         my $sn = $i_mac->{$entry};
         next unless $sn;
         return $sn;
     }
-    return undef;
+    return;
 }
 
 sub serial {
     my $nap222x = shift;
-    my $i_mac = $nap222x->i_mac();
+    my $i_mac   = $nap222x->i_mac();
 
-# Return Interface MAC   
-    foreach my $entry (keys %$i_mac){
+    # Return Interface MAC
+    foreach my $entry ( keys %$i_mac ) {
         my $sn = $i_mac->{$entry};
         next unless $sn;
         return $sn;
     }
-    return undef;
-}
-
-sub i_ignore {
-    my $nap222x = shift;
-    my $descr = $nap222x->i_description();
-
-    my %i_ignore;
-    foreach my $if (keys %$descr){
-        my $type = $descr->{$if};
-      # Skip virtual interfaces  
-        $i_ignore{$if}++ if $type =~ /(loopback|lo|other)/i;
-    }
-    return \%i_ignore;
+    return;
 }
 
 sub interfaces {
     my $nap222x = shift;
-    my $interfaces = $nap222x->i_index();
-    my $description = $nap222x->i_description();
+    my $partial = shift;
+
+    my $interfaces  = $nap222x->i_index($partial)       || {};
+    my $description = $nap222x->i_description($partial) || {};
 
     my %interfaces = ();
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $desc = $description->{$iid};
         next unless defined $desc;
         next if $desc =~ /lo/i;
@@ -184,25 +162,26 @@ sub interfaces {
 
 sub i_duplex {
     my $nap222x = shift;
-    
-    my $mode = $nap222x->nt_dpx();
-    my $port_name = $nap222x->nt_prt_name();
-    my $interfaces = $nap222x->interfaces();
-    
+    my $partial = shift;
+
+    my $mode       = $nap222x->nt_dpx($partial)      || {};
+    my $port_name  = $nap222x->nt_prt_name($partial) || {};
+    my $interfaces = $nap222x->interfaces($partial)  || {};
+
     my %i_duplex;
-    foreach my $if (keys %$interfaces){
+    foreach my $if ( keys %$interfaces ) {
         my $port = $interfaces->{$if};
         next unless $port =~ /dp/i;
-        foreach my $idx (keys %$mode) {
-            my $name = $port_name->{$idx}||'unknown';
+        foreach my $idx ( keys %$mode ) {
+            my $name = $port_name->{$idx} || 'unknown';
             next unless $name eq $port;
             my $duplex = $mode->{$idx};
-            
+
             $duplex = 'other' unless defined $duplex;
             $duplex = 'half' if $duplex =~ /half/i;
             $duplex = 'full' if $duplex =~ /full/i;
-    
-            $i_duplex{$if}=$duplex;
+
+            $i_duplex{$if} = $duplex;
         }
     }
     return \%i_duplex;
@@ -210,28 +189,31 @@ sub i_duplex {
 
 sub i_duplex_admin {
     my $nap222x = shift;
-    
-    my $dpx_admin = $nap222x->nt_dpx_admin();
-    my $nt_auto = $nap222x->nt_auto();
-    my $interfaces = $nap222x->interfaces();
-    my $port_name = $nap222x->nt_prt_name();
- 
+    my $partial = shift;
+
+    my $dpx_admin  = $nap222x->nt_dpx_admin($partial) || {};
+    my $nt_auto    = $nap222x->nt_auto($partial)      || {};
+    my $interfaces = $nap222x->interfaces($partial)   || {};
+    my $port_name  = $nap222x->nt_prt_name($partial)  || {};
+
     my %i_duplex_admin;
-    foreach my $if (keys %$interfaces){
+    foreach my $if ( keys %$interfaces ) {
         my $port = $interfaces->{$if};
         next unless $port =~ /dp/i;
-        foreach my $idx (keys %$dpx_admin) {
-            my $name = $port_name->{$idx}||'unknown';
+        foreach my $idx ( keys %$dpx_admin ) {
+            my $name = $port_name->{$idx} || 'unknown';
             next unless $name eq $port;
             my $duplex = $dpx_admin->{$idx};
-            my $auto = $nt_auto->{$idx};
-    
+            my $auto   = $nt_auto->{$idx};
+
             $duplex = 'other' unless defined $duplex;
-            $duplex = 'half' if ($duplex =~ /half/i and $auto =~ /disabled/i);
-            $duplex = 'full' if ($duplex =~ /full/i and $auto =~ /disabled/i);
+            $duplex = 'half'
+                if ( $duplex =~ /half/i and $auto =~ /disabled/i );
+            $duplex = 'full'
+                if ( $duplex =~ /full/i and $auto =~ /disabled/i );
             $duplex = 'auto' if $auto =~ /enabled/i;
-    
-            $i_duplex_admin{$if}=$duplex;
+
+            $i_duplex_admin{$if} = $duplex;
         }
     }
     return \%i_duplex_admin;
@@ -239,18 +221,20 @@ sub i_duplex_admin {
 
 sub i_name {
     my $nap222x = shift;
-    my $interfaces = $nap222x->interfaces();
+    my $partial = shift;
+
+    my $interfaces = $nap222x->interfaces($partial) || {};
 
     my %i_name;
-    foreach my $if (keys %$interfaces){
+    foreach my $if ( keys %$interfaces ) {
         my $desc = $interfaces->{$if};
-    next unless defined $desc;
-        
+        next unless defined $desc;
+
         my $name = 'unknown';
-        $name = 'Ethernet Interface' if $desc =~ /dp/i;
+        $name = 'Ethernet Interface'   if $desc =~ /dp/i;
         $name = 'Wireless Interface B' if $desc =~ /ndc/i;
         $name = 'Wireless Interface A' if $desc =~ /ar/i;
-        
+
         $i_name{$if} = $name;
     }
     return \%i_name;
@@ -259,32 +243,135 @@ sub i_name {
 # dot1dBasePortTable does not exist and dot1dTpFdbPort does not map to ifIndex
 sub bp_index {
     my $nap222x = shift;
-    my $interfaces = $nap222x->interfaces();
+    my $partial = shift;
+
+    my $interfaces = $nap222x->interfaces($partial) || {};
 
     my %bp_index;
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $desc = $interfaces->{$iid};
         next unless defined $desc;
         next unless $desc =~ /(ndc|ar)/i;
-        
+
         my $port = 1;
         $port = 2 if $desc =~ /ndc/i;
 
-    $bp_index{$port} = $iid;
+        $bp_index{$port} = $iid;
     }
     return \%bp_index;
 }
 
+# Indicies don't match anywhere in these devices! Need to override to match
+# IfIndex.
+sub i_ssidlist {
+    my $nap222x = shift;
+    my $partial = shift;
+
+    # modify partial to match index
+    if ( defined $partial ) {
+        $partial = $partial - 2;
+    }
+    my $ssids = $nap222x->orig_i_ssidlist($partial) || {};
+
+    my %i_ssidlist;
+    foreach my $iid ( keys %$ssids ) {
+        my $port = $iid + 2;
+        my $ssid = $ssids->{$iid};
+        next unless defined $ssid;
+
+        $i_ssidlist{$port} = $ssid;
+    }
+    return \%i_ssidlist;
+}
+
+sub i_ssidbcast {
+    my $nap222x = shift;
+    my $partial = shift;
+
+    # modify partial to match index
+    if ( defined $partial ) {
+        $partial = $partial - 2;
+    }
+    my $bcast = $nap222x->nt_i_broadcast($partial) || {};
+
+    my %i_ssidbcast;
+    foreach my $iid ( keys %$bcast ) {
+        my $port = $iid + 2;
+        my $bc   = $bcast->{$iid};
+        next unless defined $bc;
+
+        $i_ssidbcast{$port} = $bc;
+    }
+    return \%i_ssidbcast;
+}
+
+sub i_80211channel {
+    my $nap222x = shift;
+    my $partial = shift;
+
+    # modify partial to match index
+    if ( defined $partial ) {
+        $partial = $partial - 2;
+    }
+    my $phy_type = $nap222x->dot11_phy_type($partial) || {};
+    my $cur_freq = $nap222x->dot11_cur_freq()         || {};
+    my $cur_ch   = $nap222x->dot11_cur_ch()           || {};
+
+    my %i_80211channel;
+    foreach my $iid ( keys %$phy_type ) {
+        my $port = $iid + 2;
+        my $type = $phy_type->{$iid};
+        next unless defined $type;
+        if ( $type =~ /dsss/ ) {
+            my $ch = $cur_ch->{1};
+            next unless defined $ch;
+            $i_80211channel{$port} = $ch;
+        }
+        elsif ( $type =~ /ofdm/ ) {
+            my $ch = $cur_freq->{0};
+            next unless defined $ch;
+            $i_80211channel{$port} = $ch;
+        }
+        else {
+            next;
+        }
+    }
+
+    return \%i_80211channel;
+}
+
+sub i_vlan {
+    my $nap222x = shift;
+    my $partial = shift;
+
+    # modify partial to match index
+    if ( defined $partial ) {
+        $partial = $partial - 2;
+    }
+    my $vlans = $nap222x->nt_i_vlan($partial) || {};
+
+    my %i_vlan;
+    foreach my $iid ( keys %$vlans ) {
+        my $port = $iid + 2;
+        my $vlan = $vlans->{$iid};
+        next unless defined $vlan;
+
+        $i_vlan{$port} = $vlan;
+    }
+    return \%i_vlan;
+}
+
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer2::nap222x - SNMP Interface to Nortel 2220 Series Access Points
+SNMP::Info::Layer2::NAP222x - SNMP Interface to Nortel 2220 Series Access
+Points
 
 =head1 AUTHOR
 
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -292,14 +379,13 @@ Eric Miller (C<eric@jeneric.org>)
  my $nap222x = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $nap222x->class();
+ my $class = $nap222x->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
@@ -307,47 +393,39 @@ Eric Miller (C<eric@jeneric.org>)
 Provides abstraction to the configuration information obtainable from a Nortel
 2220 series wireless Access Points through SNMP. 
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
- my $nap222x = new SNMP::Info::Layer2::nap222x(...);
+ my $nap222x = new SNMP::Info::Layer2::NAP222x(...);
 
 =head2 Inherited Classes
 
 =over
 
-=item SNMP::Info
-
-=item SNMP::Info::Bridge
-
 =item SNMP::Info::SONMP
 
+=item SNMP::Info::IEEE802dot11
+
+=item SNMP::Info::Layer2
+
 =back
 
 =head2 Required MIBs
 
 =over
 
-=item NORTEL-WLAN-AP-MIB
-
-=item Inherited classes
-
-See SNMP::Info for its own MIB requirements.
-
-See SNMP::Info::Bridge for its own MIB requirements.
-
-See SNMP::Info::SONMP for its own MIB requirements.
+=item F<NORTEL-WLAN-AP-MIB>
 
 =back
 
-MIBs can be found on the CD that came with your product.
+=head2 Inherited MIBs
 
-Or, they can be downloaded directly from Nortel Networks regardless of support
-contract status.
+See L<SNMP::Info::SONMP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
 
-Go to http://www.nortelnetworks.com Techninal Support, Browse Technical Support,
-Select by Product Families, Wireless LAN, WLAN - Access Point 2220, Software.
-Filter on mibs and download the latest version's archive.
 
 =head1 GLOBALS
 
@@ -355,25 +433,17 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $nap222x->vendor()
-
-Returns 'Nortel'
-
 =item $nap222x->model()
 
-Returns the model extracted from B<sysDescr>.
+Returns the model extracted from C<sysDescr>.
 
 =item $nap222x->os()
 
-Returns 'Nortel'
-
-=item $nap222x->os_ver()
-
-Returns the software version extracted from B<ntWlanSwOpCodeVer>.
+Returns 'nortel'
 
 =item $nap222x->os_bin()
 
-Returns the firmware version extracted from B<ntWlanSwBootRomVer>.
+Returns the firmware version extracted from C<ntWlanSwBootRomVer>.
 
 =item $nap222x->mac()
 
@@ -387,65 +457,65 @@ Returns the MAC address of the first Ethernet Interface.
 
 Returns the hardware version.
 
-B<ntWlanSwHardwareVer>
+(C<ntWlanSwHardwareVer>)
 
 =item $nap222x->nt_cc()
 
 Returns the country code of the AP.
 
-B<ntWlanSwHardwareVer>
+(C<ntWlanSwHardwareVer>)
 
 =item $nap222x->tftp_action()
 
-B<ntWlanTransferStart>
+(C<ntWlanTransferStart>)
 
 =item $nap222x->tftp_host()
 
-B<ntWlanFileServer>
+(C<ntWlanFileServer>)
 
 =item $nap222x->tftp_file()
 
-B<ntWlanDestFile>
+(C<ntWlanDestFile>)
 
 =item $nap222x->tftp_type()
 
-B<ntWlanFileType>
+(C<ntWlanFileType>)
 
 =item $nap222x->tftp_result()
 
-B<ntWlanFileTransferStatus>
+(C<ntWlanFileTransferStatus>)
 
 =item $nap222x->tftp_xtype()
 
-B<ntWlanTransferType>
+(C<ntWlanTransferType>)
 
 =item $nap222x->tftp_src_file()
 
-B<ntWlanSrcFile>
+(C<ntWlanSrcFile>)
 
 =item $nap222x->ftp_user()
 
-B<ntWlanUserName>
+(C<ntWlanUserName>)
 
 =item $nap222x->ftp_pass()
 
-B<ntWlanPassword>
+(C<ntWlanPassword>)
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Globals imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info for details.
+See L<SNMP::Info::SONMP/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Bridge
+=head2 Global Methods imported from SNMP::Info::IEEE802dot11
 
-See documentation in SNMP::Info::Bridge for details.
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
 
-=head2 Global Methods imported from SNMP::Info::SONMP
+=head2 Global Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::SONMP for details.
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -458,21 +528,17 @@ to a hash.
 
 Returns reference to map of IIDs to physical ports. 
 
-=item $nap222x->i_ignore()
-
-Returns reference to hash of IIDs to ignore.
-
 =item $nap222x->i_duplex()
 
 Returns reference to hash.  Maps port operational duplexes to IIDs.
 
-B<ntWlanPortSpeedDpxStatus>
+(C<ntWlanPortSpeedDpxStatus>)
 
 =item $nap222x->i_duplex_admin()
 
 Returns reference to hash.  Maps port admin duplexes to IIDs.
 
-B<ntWlanPortCapabilities>
+(C<ntWlanPortCapabilities>)
 
 =item $nap222x->i_name()
 
@@ -480,21 +546,41 @@ Returns a human name based upon port description.
 
 =item $nap222x->bp_index()
 
-Returns a mapping between ifIndex and the Bridge Table.  This does not exist in
-the MIB and bridge port index is not the same as ifIndex so it is created. 
+Returns a mapping between C<ifIndex> and the Bridge Table.  This does not
+exist in the MIB and bridge port index is not the same as C<ifIndex> so it is
+created. 
+
+=item $nap222x->i_ssidlist()
+
+Returns reference to hash.  SSID's recognized by the radio interface.
+
+=item $nap222x->i_ssidbcast()
+
+Returns reference to hash.  Indicates whether the SSID is broadcast.
+
+=item $nap222x->i_80211channel()
+
+Returns reference to hash.  Current operating frequency channel of the radio
+interface.
+
+=item $nap222x->i_vlan()
+
+The default Vlan ID of the radio interfaces.
+
+(C<ntWlanApVlanDefaultVid>)
 
 =back
 
-=head2 Table Methods imported from SNMP::Info
-
-See documentation in SNMP::Info for details.
-
-=head2 Table Methods imported from SNMP::Info::Bridge
-
-See documentation in SNMP::Info::Bridge for details.
-
 =head2 Table Methods imported from SNMP::Info::SONMP
 
-See documentation in SNMP::Info::SONMP for details.
+See L<SNMP::Info::SONMP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/Netgear.pm

@@ -0,0 +1,240 @@
+# SNMP::Info::Layer2::Netgear
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer2::Netgear;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer2;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer2::Netgear::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::Netgear::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( %SNMP::Info::Layer2::MIBS, %SNMP::Info::LLDP::MIBS, );
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::LLDP::GLOBALS,
+    ng_serial => '.1.3.6.1.4.1.4526.10.1.1.1.4.0',
+    ng_gsmosver  => '.1.3.6.1.4.1.4526.10.1.1.1.13.0',
+    ng_gsosver  =>  '.1.3.6.1.2.1.32.2.1.1.1.0',
+);
+
+%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::LLDP::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+
+sub vendor {
+    return 'netgear';
+}
+
+sub os {
+    return 'netgear';
+}
+
+# Wish the OID-based method worked, but netgear scatters
+# the sysObjectID values across all the device MIBs, and
+# makes the device MIBs state secrets.
+# They seem to set sysDescr to the model number, though,
+# so we'll use that.
+sub model {
+    my $netgear = shift;
+    return $netgear->description();
+}
+
+#
+# This is model-dependent.  Some netgear brand devices don't implement
+# the bridge MIB forwarding table, so we use the Q-BRIDGE-MIB forwarding
+# table.  Fall back to the orig functions if the qb versions don't
+# return anything.
+sub fw_mac {
+    my $netgear = shift;
+    my $ret     = $netgear->qb_fw_mac();
+    $ret = $netgear->orig_fw_mac() if ( !defined($ret) );
+    return $ret;
+}
+
+sub fw_port {
+    my $netgear = shift;
+    my $ret     = $netgear->qb_fw_port();
+    $ret = $netgear->orig_fw_port() if ( !defined($ret) );
+    return $ret;
+}
+
+# these seem to work for GSM models but not GS
+# https://sourceforge.net/tracker/?func=detail&aid=3085413&group_id=70362&atid=527529
+sub os_ver {
+    my $self = shift;
+    return $self->ng_gsosver if defined $self->model and $self->model =~ m/GS\d/i;
+    return $self->ng_gsmosver();
+}
+
+sub serial {
+    my $self = shift;
+    return if defined $self->model and $self->model =~ m/GS\d/i;
+    return $self->ng_serial();
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer2::Netgear - SNMP Interface to Netgear switches
+
+=head1 AUTHOR
+
+ Bill Fenner and Zoltan Erszenyi, 
+ Hacked in LLDP support from Baystack.pm by 
+ Nic Bernstein <nic@onlight.com>
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $netgear = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $netgear->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+Netgear device through SNMP. See inherited classes' documentation for 
+inherited methods.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer2
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+MIBs listed in L<SNMP::Info::Layer2/"Required MIBs"> and its inherited
+classes.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $netgear->vendor()
+
+Returns 'netgear'
+
+=item $netgear->os()
+
+Returns 'netgear' 
+
+=item $netgear->model()
+
+Returns description()
+
+=item $netgear->os_ver()
+
+Returns OS Version.
+
+=item $netgear->serial()
+
+Returns Serial Number.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of
+a reference to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $netgear->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses.
+
+Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
+the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
+C<Q-BRIDGE-MIB> doesn't return anything.
+
+=item $netgear->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
+the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
+C<Q-BRIDGE-MIB> doesn't return anything.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer2
+
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer2/Orinoco.pm

@@ -1,64 +1,70 @@
 # SNMP::Info::Layer2::Orinoco
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
 #
-# Redistribution and use in source and binary forms, with or without 
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::Orinoco;
-$VERSION = 0.9;
+
 use strict;
-
 use Exporter;
-use SNMP::Info;
-use SNMP::Info::Bridge;
+use SNMP::Info::IEEE802dot11;
+use SNMP::Info::Layer2;
 
-@SNMP::Info::Layer2::Orinoco::ISA = qw/SNMP::Info SNMP::Info::Bridge Exporter/;
+@SNMP::Info::Layer2::Orinoco::ISA
+    = qw/SNMP::Info::IEEE802dot11 SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::Orinoco::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
 
-%MIBS    = (
-            %SNMP::Info::MIBS,
-            %SNMP::Info::Bridge::MIBS,
-           );
+$VERSION = '3.03';
 
-%GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-           );
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS,
+    %SNMP::Info::IEEE802dot11::MIBS,
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-             );
+    #'ORiNOCO-MIB' => 'orinoco',
+);
 
-%MUNGE   = (
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            );
+%GLOBALS
+    = ( %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::IEEE802dot11::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
+
+    # ORiNOCO-MIB:oriWirelessIfPropertiesTable
+    #'ori_ssid'       => 'oriWirelessIfNetworkName',
+    #'ori_channel'    => 'oriWirelessIfChannel',
+    #'ori_closed_sys' => 'oriWirelessIfClosedSystem',
+    # ORiNOCO-MIB:oriSystemInvMgmtComponentTable
+);
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::IEEE802dot11::MUNGE, );
 
 sub os {
     return 'orinoco';
@@ -66,66 +72,74 @@ sub os {
 
 sub os_ver {
     my $orinoco = shift;
+
     my $descr = $orinoco->description();
-    return undef unless defined $descr;
+    return unless defined $descr;
 
-    if ($descr =~ m/V(\d+\.\d+)/){
+    if ( $descr =~ m/V(\d+\.\d+)/ ) {
         return $1;
     }
-    if ($descr =~ m/v(\d+\.\d+\.\d+)/){
+    if ( $descr =~ m/v(\d+\.\d+\.\d+)/ ) {
         return $1;
     }
 
-    return undef;
+    return;
 }
 
 sub os_bin {
     my $orinoco = shift;
+
     my $descr = $orinoco->description();
-    return undef unless defined $descr;
+    return unless defined $descr;
 
-    if ($descr =~ m/V(\d+\.\d+)$/){
+    if ( $descr =~ m/V(\d+\.\d+)$/ ) {
         return $1;
     }
-    if ($descr =~ m/v(\d+\.\d+\.\d+)$/){
+    if ( $descr =~ m/v(\d+\.\d+\.\d+)$/ ) {
         return $1;
     }
 
-    return undef;
+    return;
 }
 
 sub vendor {
-    return 'Proxim';
+    return 'proxim';
 }
 
 sub model {
     my $orinoco = shift;
-    my $descr = $orinoco->description();
-    return undef unless defined $descr;
 
-    return 'AP-1000' if ($descr =~ /AP-1000/);
-    return 'AP-2000' if ($descr =~ /AP-2000/);
-    return 'WavePOINT-II' if ($descr =~ /WavePOINT-II/);
-    return undef;
+    my $descr = $orinoco->description();
+    return unless defined $descr;
+
+    return $1             if ( $descr =~ /(AP-\d+)/ );
+    return 'WavePOINT-II' if ( $descr =~ /WavePOINT-II/ );
+    return 'Outdoor Router' if ( $descr =~ /Wireless Router/ );
+
+    return;
 }
 
 sub serial {
     my $orinoco = shift;
-    my $descr = $orinoco->description();
-    return undef unless defined $descr;
 
-    $descr  = $1 if $descr =~ /SN-(\S+)/;
+    my $descr = $orinoco->description();
+    return unless defined $descr;
+
+    $descr = $1 if $descr =~ /SN-(\S+)/;
     return $descr;
 }
 
 sub i_ignore {
     my $orinoco = shift;
-    my $descr = $orinoco->i_description();
+    my $partial = shift;
+
+    my $descr = $orinoco->i_description($partial) || {};
 
     my %i_ignore;
-    foreach my $if (keys %$descr){
+    foreach my $if ( keys %$descr ) {
         my $type = $descr->{$if};
-	  # Skip virtual interfaces  
+
+        # Skip virtual interfaces
         $i_ignore{$if}++ if $type =~ /(lo|empty|PCMCIA)/i;
     }
     return \%i_ignore;
@@ -133,22 +147,40 @@ sub i_ignore {
 
 sub interfaces {
     my $orinoco = shift;
-    my $interfaces = $orinoco->i_index();
-    my $descriptions = $orinoco->i_description();
+    my $partial = shift;
+
+    my $interfaces   = $orinoco->i_index($partial)       || {};
+    my $descriptions = $orinoco->i_description($partial) || {};
 
     my %interfaces = ();
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $desc = $descriptions->{$iid};
         next unless defined $desc;
         next if $desc =~ /(lo|empty|PCMCIA)/i;
 
-	$desc  = 'AMD' if $desc =~ /AMD/;
+        $desc = 'AMD' if $desc =~ /AMD/;
 
         $interfaces{$iid} = $desc;
     }
     return \%interfaces;
 }
 
+#sub i_ssidbcast {
+#    my $orinoco = shift;
+#    my $partial = shift;
+#
+#    my $bcast = $orinoco->ori_closed_sys($partial) || {};
+#
+#    my %i_ssidbcast;
+#    foreach my $iid (keys %$bcast){
+#        my $bc   = $bcast->{$iid};
+#        next unless defined $bc;
+#
+#        $i_ssidbcast{$iid} = $bc;
+#    }
+#    return \%i_ssidbcast;
+#}
+
 1;
 __END__
 
@@ -158,7 +190,7 @@ SNMP::Info::Layer2::Orinoco - SNMP Interface to Orinoco Series Access Points
 
 =head1 AUTHOR
 
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -166,23 +198,23 @@ Eric Miller (C<eric@jeneric.org>)
  my $orinoco = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $orinoco->class();
+ my $class = $orinoco->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
 
-Provides abstraction to the configuration information obtainable from a Orinoco
-Access Point through SNMP. 
+Provides abstraction to the configuration information obtainable from
+Orinoco Access Point through SNMP.  Orinoco devices have been manufactured
+by Proxim, Agere, and Lucent.
 
-For speed or debugging purposes you can call the subclass directly, but not after
-determining a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $orinoco = new SNMP::Info::Layer2::Orinoco(...);
 
@@ -190,9 +222,9 @@ determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info
+=item SNMP::Info::Layer2
 
-=item SNMP::Info::Bridge
+=item SNMP::Info::IEEE802dot11
 
 =back
 
@@ -200,14 +232,16 @@ determining a more specific class using the method above.
 
 =over
 
-=item Inherited classes
-
-See SNMP::Info for its own MIB requirements.
-
-See SNMP::Info::Bridge for its own MIB requirements.
+None.
 
 =back
 
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer2/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
+
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -216,11 +250,11 @@ These are methods that return scalar value from SNMP
 
 =item $orinoco->vendor()
 
-Returns 'Proxim' :)
+Returns 'proxim'
 
 =item $orinoco->model()
 
-Returns the model extracted from B<sysDescr>.
+Returns the model extracted from C<sysDescr>.
 
 =item $orinoco->os()
 
@@ -228,27 +262,27 @@ Returns 'Orinoco'
 
 =item $orinoco->os_ver()
 
-Returns the software version extracted from B<sysDescr>.
+Returns the software version extracted from C<sysDescr>.
 
 =item $orinoco->os_bin()
 
-Returns the firmware version extracted from B<sysDescr>.
+Returns the firmware version extracted from C<sysDescr>.
 
 =item $orinoco->serial()
 
-Returns the serial number extracted from B<sysDescr>.
+Returns the serial number extracted from C<sysDescr>.
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Global Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info for details.
+See L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Bridge
+=head2 Global Methods imported from SNMP::Info::IEEE802dot11
 
-See documentation in SNMP::Info::Bridge for details.
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -267,12 +301,12 @@ Returns reference to hash of IIDs to ignore.
 
 =back
 
-=head2 Table Methods imported from SNMP::Info
+=head2 Table Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info for details.
+See L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::Bridge
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
 
-See documentation in SNMP::Info::Bridge for details.
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
 
 =cut

Info/Layer2/ZyXEL_DSLAM.pm

@@ -1,67 +1,63 @@
 # SNMP::Info::Layer2::ZyXEL_DSLAM
-# Dmitry Sergienko <dmitry@trifle.net>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker <max@warped.org>
+# Copyright (c) 2008 Max Baker
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of Netdisco nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer2::ZyXEL_DSLAM;
-$VERSION = 0.9;
-# $Id$
-use strict;
 
+use strict;
 use Exporter;
 use SNMP::Info::Layer2;
 
-@SNMP::Info::Layer2::ZyXEL_DSLAM::ISA = qw/SNMP::Info::Layer2 Exporter/;
+@SNMP::Info::Layer2::ZyXEL_DSLAM::ISA       = qw/SNMP::Info::Layer2 Exporter/;
 @SNMP::Info::Layer2::ZyXEL_DSLAM::EXPORT_OK = qw//;
 
-use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE $AUTOLOAD $INIT $DEBUG/;
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
 
 # Set for No CDP
-%GLOBALS = (
-            %SNMP::Info::Layer2::GLOBALS
-            );
+%GLOBALS = ( %SNMP::Info::Layer2::GLOBALS );
 
-%FUNCS   = (%SNMP::Info::Layer2::FUNCS,
-            'ip_adresses' => 'ipAdEntAddr',
-            'i_name'	  => 'ifDescr',
-            'i_description' => 'adslLineConfProfile',
-           );
+%FUNCS = (
+    %SNMP::Info::Layer2::FUNCS,
+    'ip_adresses'   => 'ipAdEntAddr',
+    'i_name'        => 'ifDescr',
+    'i_description' => 'adslLineConfProfile',
+);
 
-%MIBS    = (
-            %SNMP::Info::Layer2::MIBS,
-            'ADSL-LINE-MIB' => 'adslLineConfProfile'
-           );
-
-%MUNGE   = (%SNMP::Info::Layer2::MUNGE
-           );
+%MIBS
+    = ( %SNMP::Info::Layer2::MIBS, 'ADSL-LINE-MIB' => 'adslLineConfProfile' );
 
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE );
 
 sub layers {
-    my $zyxel = shift;
+    my $zyxel  = shift;
     my $layers = $zyxel->layers();
     return $layers if defined $layers;
 
@@ -80,11 +76,11 @@ sub os {
 sub os_ver {
     my $zyxel = shift;
     my $descr = $zyxel->description();
-    
-    if ($descr =~ m/version (\S+) /){
+
+    if ( $descr =~ m/version (\S+) / ) {
         return $1;
     }
-    return undef;
+    return;
 }
 
 sub model {
@@ -92,23 +88,26 @@ sub model {
 
     my $desc = $zyxel->description();
 
-    if ($desc =~ /8-port ADSL Module\(Annex A\)/){
+    if ( $desc =~ /8-port ADSL Module\(Annex A\)/ ) {
         return "AAM1008-61";
-    } elsif ($desc =~ /8-port ADSL Module\(Annex B\)/){
+    }
+    elsif ( $desc =~ /8-port ADSL Module\(Annex B\)/ ) {
         return "AAM1008-63";
     }
-    return undef;
+    return;
 }
 
-sub ip{
-    my $zyxel = shift;
+sub ip {
+    my $zyxel   = shift;
     my $ip_hash = $zyxel->ip_addresses();
-    my $ip;
-    
-    foreach $ip (keys %{$ip_hash}) {
-        my $found_ip = $ip if (defined $ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/);
+    my $found_ip;
+
+    foreach my $ip ( keys %{$ip_hash} ) {
+        $found_ip = $ip
+            if ( defined $ip
+            and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/ );
     }
-    return $ip;
+    return $found_ip;
 }
 1;
 __END__
@@ -127,7 +126,6 @@ Dmitry Sergienko (C<dmitry@trifle.net>)
  my $zyxel = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myhub',
                           Community   => 'public',
                           Version     => 1
@@ -155,13 +153,12 @@ inherited methods.
 
 =over
 
-=item ADSL-LINE-MIB
-
-This MIB assumedly obtainable through ZyXEL or possibly included with your device.
+=item F<ADSL-LINE-MIB>
 
 =item Inherited Classes
 
-MIBs listed in SNMP::Info::Layer2 and their inherited classes.
+MIBs listed in L<SNMP::Info::Layer2/"Required MIBs"> and their inherited
+classes.
 
 =back
 
@@ -189,19 +186,23 @@ Culls Version from description()
 
 Returns IP Address of DSLAM.
 
-(B<ipAdEntAddr>)
+(C<ipAdEntAddr>)
 
 =item $zyxel->model()
 
-Trys to cull out model out of the description field.
+Tries to cull out model out of the description field.
+
+=item $zyxel->layers()
+
+Returns 00000011.
 
 =back
 
 =head2 Global Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 =head2 Overrides
 
@@ -209,7 +210,7 @@ See documentation in SNMP::Info::Layer2 for details.
 
 =item $zyxel->i_name()
 
-Returns reference to map of IIDs to port name (B<ifDescr>).
+Returns reference to map of IIDs to port name (C<ifDescr>).
 
 =item $zyxel->i_description()
 
@@ -219,6 +220,6 @@ Returns reference to map of IIDs to human-set port description (profile name).
 
 =head2 Table Methods imported from SNMP::Info::Layer2
 
-See documentation in SNMP::Info::Layer2 for details.
+See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3.pm

@@ -1,139 +1,201 @@
 # SNMP::Info::Layer3 - SNMP Interface to Layer3 devices
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker -- All changes from Version 0.7 on
+# Copyright (c) 2008 Max Baker -- All changes from Version 0.7 on
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
-use SNMP::Info::CDP;
-use SNMP::Info::CiscoStats;
 use SNMP::Info::Bridge;
 use SNMP::Info::EtherLike;
+use SNMP::Info::Entity;
+use SNMP::Info::PowerEthernet;
+use SNMP::Info::IPv6;
+use SNMP::Info::AdslLine;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
-
-@SNMP::Info::Layer3::ISA = qw/SNMP::Info SNMP::Info::CDP SNMP::Info::Bridge 
-                              SNMP::Info::EtherLike SNMP::Info::CiscoStats Exporter/;
+@SNMP::Info::Layer3::ISA = qw/
+    SNMP::Info::PowerEthernet SNMP::Info::IPv6
+    SNMP::Info::Entity SNMP::Info::EtherLike
+    SNMP::Info::Bridge SNMP::Info::AdslLine
+    SNMP::Info Exporter/;
 @SNMP::Info::Layer3::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$INIT = 0;
+$VERSION = '3.03';
 
-%MIBS = ( %SNMP::Info::MIBS,
-          %SNMP::Info::Bridge::MIBS,
-          %SNMP::Info::CDP::MIBS,
-          %SNMP::Info::CiscoStats::MIBS,
-          %SNMP::Info::EtherLike::MIBS,
-          'ENTITY-MIB'         => 'entPhysicalName',
-          'CISCO-PRODUCTS-MIB' => 'sysName',
-          'OSPF-MIB'           => 'ospfRouterId',
-        );
+%MIBS = (
+    %SNMP::Info::MIBS,
+    %SNMP::Info::AdslLine::MIBS,
+    %SNMP::Info::Bridge::MIBS,
+    %SNMP::Info::EtherLike::MIBS,
+    %SNMP::Info::Entity::MIBS,
+    %SNMP::Info::PowerEthernet::MIBS,
+    %SNMP::Info::IPv6::MIBS,
+    'IP-MIB'   => 'ipNetToMediaIfIndex',
+    'OSPF-MIB' => 'ospfRouterId',
+    'BGP4-MIB' => 'bgpIdentifier',
+);
 
 %GLOBALS = (
-            # Inherit the super class ones
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::CDP::GLOBALS,
-            %SNMP::Info::CiscoStats::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::EtherLike::GLOBALS,
-            'mac'       => 'ifPhysAddress.1',
-            'serial1'   => '.1.3.6.1.4.1.9.3.6.3.0', # OLD-CISCO-CHASSIS-MIB::chassisId.0
-            'router_ip' => 'ospfRouterId.0',
-           );
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::CDP::FUNCS,
-            %SNMP::Info::CiscoStats::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::EtherLike::FUNCS,
-            # IFMIB
-            'i_name2'    => 'ifName',
-            # Address Translation Table (ARP Cache)
-            'at_index'   => 'atIfIndex',
-            'at_paddr'   => 'atPhysAddress',
-            'at_netaddr' => 'atNetAddress',
-            'ospf_ip'    => 'ospfHostIpAddress',
-            'ent_serial' => 'entPhysicalSerialNum',
-            'ent_chassis'=> 'entPhysicalDescr',
-           );
+    # Inherit the super class ones
+    %SNMP::Info::GLOBALS,
+    %SNMP::Info::AdslLine::GLOBALS,
+    %SNMP::Info::Bridge::GLOBALS,
+    %SNMP::Info::EtherLike::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+    %SNMP::Info::PowerEthernet::GLOBALS,
+    %SNMP::Info::IPv6::GLOBALS,
+    'mac' => 'ifPhysAddress.1',
+    'serial1' =>
+        '.1.3.6.1.4.1.9.3.6.3.0',    # OLD-CISCO-CHASSIS-MIB::chassisId.0
+    'router_ip'    => 'ospfRouterId.0',
+    'bgp_id'       => 'bgpIdentifier.0',
+    'bgp_local_as' => 'bgpLocalAs.0',
+);
+
+%FUNCS = (
+    %SNMP::Info::FUNCS,
+    %SNMP::Info::AdslLine::FUNCS,
+    %SNMP::Info::Bridge::FUNCS,
+    %SNMP::Info::EtherLike::FUNCS,
+    %SNMP::Info::Entity::FUNCS,
+    %SNMP::Info::PowerEthernet::FUNCS,
+    %SNMP::Info::IPv6::FUNCS,
+
+    # Obsolete Address Translation Table (ARP Cache)
+    'old_at_index'   => 'atIfIndex',
+    'old_at_paddr'   => 'atPhysAddress',
+    'old_at_netaddr' => 'atNetAddress',
+
+    # IP-MIB IP Net to Media Table (ARP Cache)
+    'at_index'   => 'ipNetToMediaIfIndex',
+    'at_paddr'   => 'ipNetToMediaPhysAddress',
+    'at_netaddr' => 'ipNetToMediaNetAddress',
+
+    # OSPF-MIB::ospfIfTable
+    'ospf_if_ip'    => 'ospfIfIpAddress',
+    'ospf_if_area'  => 'ospfIfAreaId',
+    'ospf_if_type'  => 'ospfIfType',
+    'ospf_if_hello' => 'ospfIfHelloInterval',
+    'ospf_if_dead'  => 'ospfIfRtrDeadInterval',
+    'ospf_if_admin' => 'ospfIfAdminStat',
+    'ospf_if_state' => 'ospfIfState',
+
+    # OSPF-MIB::ospfNbrTable
+    'ospf_ip'         => 'ospfHostIpAddress',
+    'ospf_peers'      => 'ospfNbrIpAddr',
+    'ospf_peer_id'    => 'ospfNbrRtrId',
+    'ospf_peer_state' => 'ospfNbrState',
+
+    # BGP4-MIB::bgpPeerTable
+    'bgp_peers'               => 'bgpPeerLocalAddr',
+    'bgp_peer_id'             => 'bgpPeerIdentifier',
+    'bgp_peer_state'          => 'bgpPeerState',
+    'bgp_peer_as'             => 'bgpPeerRemoteAs',
+    'bgp_peer_addr'           => 'bgpPeerRemoteAddr',
+    'bgp_peer_fsm_est_trans'  => 'bgpPeerFsmEstablishedTransitions',
+    'bgp_peer_in_tot_msgs'    => 'bgpPeerInTotalMessages',
+    'bgp_peer_in_upd_el_time' => 'bgpPeerInUpdateElapsedTime',
+    'bgp_peer_in_upd'         => 'bgpPeerInUpdates',
+    'bgp_peer_out_tot_msgs'   => 'bgpPeerOutTotalMessages',
+    'bgp_peer_out_upd'        => 'bgpPeerOutUpdates',
+
+    # IP-MIB Net to Physical Table (ARP Cache)
+    'n2p_paddr' => 'ipNetToPhysicalPhysAddress',
+    'n2p_lastupdate' => 'ipNetToPhysicalLastUpdated',
+    'n2p_ptype' => 'ipNetToPhysicalType',
+    'n2p_pstate' => 'ipNetToPhysicalState',
+    'n2p_pstatus' => 'ipNetToPhysicalRowStatus',
+
+);
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::CDP::MUNGE,
-            %SNMP::Info::CiscoStats::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::EtherLike::MUNGE,
-            'at_paddr' => \&SNMP::Info::munge_mac,
-         );
 
+    # Inherit all the built in munging
+    %SNMP::Info::MUNGE,
+    %SNMP::Info::AdslLine::MUNGE,
+    %SNMP::Info::Bridge::MUNGE,
+    %SNMP::Info::EtherLike::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+    %SNMP::Info::PowerEthernet::MUNGE,
+    %SNMP::Info::IPv6::MUNGE,
+    'old_at_paddr' => \&SNMP::Info::munge_mac,
+    'at_paddr'     => \&SNMP::Info::munge_mac,
+    'n2p_paddr' => \&SNMP::Info::munge_mac,
+);
 
 # Method OverRides
 
 sub root_ip {
     my $l3 = shift;
 
-    my $router_ip  = $l3->router_ip();
-    my $ospf_ip    = $l3->ospf_ip();
+    my $router_ip = $l3->router_ip();
+    my $ospf_ip   = $l3->ospf_ip();
 
-    # return the first one found here (should be only)
-    if (defined $ospf_ip and scalar(keys %$ospf_ip)){
-        foreach my $key (keys %$ospf_ip){
+    # if the router ip exists and is a route advertised by the device we prefer
+    # it over the others
+    return $router_ip
+        if (( defined $router_ip )
+        and ( $router_ip ne '0.0.0.0' )
+        and ( grep { $ospf_ip->{$_} eq $router_ip } (keys %$ospf_ip))
+        and ( $l3->snmp_connect_ip($router_ip) ) );
+
+    # return the first one found here (should be only one)
+    if ( defined $ospf_ip and scalar( keys %$ospf_ip ) ) {
+        foreach my $key ( keys %$ospf_ip ) {
             my $ip = $ospf_ip->{$key};
             next if $ip eq '0.0.0.0';
-            print " SNMP::Layer3::root_ip() using $ip\n" if $DEBUG;
+            next unless $l3->snmp_connect_ip($ip);
+            print " SNMP::Layer3::root_ip() using $ip\n" if $l3->debug();
             return $ip;
         }
     }
 
-    return $router_ip if (defined $router_ip and $router_ip ne '0.0.0.0');
-    return undef;
+    return;
 }
 
 sub i_ignore {
-    my $l3 = shift;
-    
-    my $interfaces = $l3->interfaces();
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
 
     my %i_ignore;
-    foreach my $if (keys %$interfaces) {
+    foreach my $if ( keys %$interfaces ) {
+
         # lo -> cisco aironet 350 loopback
-        if ($interfaces->{$if} =~ /(tunnel|loopback|lo|null)/i){
+        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|null)/i ) {
             $i_ignore{$if}++;
         }
     }
@@ -142,34 +204,37 @@ sub i_ignore {
 
 sub serial {
     my $l3 = shift;
-    
-    my $serial1     = $l3->serial1();
-    my $ent_chassis = $l3->ent_chassis() || {};
-    my $ent_serial  = $l3->ent_serial() || {};
-    
-    my $serial2 = $ent_serial->{1}  || undef;
-    my $chassis = $ent_chassis->{1} || undef;
-    
+
+    my $serial1  = $l3->serial1();
+    my $e_descr  = $l3->e_descr() || {};
+    my $e_serial = $l3->e_serial() || {};
+
+    my $serial2 = $e_serial->{1} || undef;
+    my $chassis = $e_descr->{1}  || undef;
+
     # precedence
     #   serial2,chassis parse,serial1
-    return $serial2 if (defined $serial2 and $serial2 !~ /^\s*$/);
-    return $1 if (defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i);
-    return $serial1 if (defined $serial1 and $serial1 !~ /^\s*$/);
+    return $serial2 if ( defined $serial2 and $serial2 !~ /^\s*$/ );
+    return $1
+        if ( defined $chassis and $chassis =~ /serial#?:\s*([a-z0-9]+)/i );
+    return $serial1 if ( defined $serial1 and $serial1 !~ /^\s*$/ );
 
-    return undef;
+    return;
 }
 
-# $l3->model() - the sysObjectID returns an IID to an entry in 
+# $l3->model() - the sysObjectID returns an IID to an entry in
 #       the CISCO-PRODUCT-MIB.  Look it up and return it.
 sub model {
     my $l3 = shift;
     my $id = $l3->id();
-    
-    unless (defined $id){
-        print " SNMP::Info::Layer3::model() - Device does not support sysObjectID\n" if $DEBUG; 
-        return undef;
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::model() - Device does not support sysObjectID\n"
+            if $l3->debug();
+        return;
     }
-    
+
     my $model = &SNMP::translateObj($id);
 
     return $id unless defined $model;
@@ -181,31 +246,35 @@ sub model {
 }
 
 sub i_name {
-    my $l3 = shift;
-    my $i_index = $l3->i_index();
-    my $i_alias = $l3->i_alias();
-    my $i_name2  = $l3->i_name2();
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $i_index = $l3->i_index($partial);
+    my $i_alias = $l3->i_alias($partial);
+    my $i_name2 = $l3->orig_i_name($partial);
 
     my %i_name;
-    foreach my $iid (keys %$i_name2){
-        my $name = $i_name2->{$iid};
+    foreach my $iid ( keys %$i_name2 ) {
+        my $name  = $i_name2->{$iid};
         my $alias = $i_alias->{$iid};
-        $i_name{$iid} = (defined $alias and $alias !~ /^\s*$/) ?
-                        $alias : 
-                        $name;
+        $i_name{$iid}
+            = ( defined $alias and $alias !~ /^\s*$/ )
+            ? $alias
+            : $name;
     }
 
     return \%i_name;
 }
 
 sub i_duplex {
-    my $l3 = shift;
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $el_index  = $l3->el_index($partial);
+    my $el_duplex = $l3->el_duplex($partial);
 
-    my $el_index = $l3->el_index();
-    my $el_duplex = $l3->el_duplex();
-    
     my %i_index;
-    foreach my $el_port (keys %$el_duplex){
+    foreach my $el_port ( keys %$el_duplex ) {
         my $iid = $el_index->{$el_port};
         next unless defined $iid;
         my $duplex = $el_duplex->{$el_port};
@@ -221,18 +290,20 @@ sub i_duplex {
 
 # $l3->interfaces() - Map the Interfaces to their physical names
 sub interfaces {
-    my $l3 = shift;
-    my $interfaces = $l3->i_index();
-    my $descriptions = $l3->i_description();
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces   = $l3->i_index($partial);
+    my $descriptions = $l3->i_description($partial);
 
     my %interfaces = ();
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $desc = $descriptions->{$iid};
         next unless defined $desc;
 
         $interfaces{$iid} = $desc;
     }
-    
+
     return \%interfaces;
 }
 
@@ -240,21 +311,52 @@ sub vendor {
     my $l3 = shift;
 
     my $descr = $l3->description();
+    my $id = $l3->id();
 
-    return 'cisco' if ($descr =~ /(cisco|ios)/i);
-    return 'foundry' if ($descr =~ /foundry/i);
+    # .1.3.6.1.4.1.9.1 is the CISCO-PRODUCTS-MIB
+    # .1.3.6.1.4.1.9.9.368.4 is an old tree that Cisco CSSs were numbered from
+    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.1.\E\d+$/;
+    return 'cisco'   if $id =~ /^\Q.1.3.6.1.4.1.9.9.368.4.\E\d+/;
+    return 'cisco'   if ( $descr =~ /(cisco|\bios\b)/i );
+    return 'brocade' if ( $descr =~ /foundry/i );
+
+    return 'unknown';
 
 }
+
+sub at_index {
+    my $l3      = shift;
+    my $partial = shift;
+
+    return $l3->orig_at_index($partial) || $l3->old_at_index($partial);
+}
+
+sub at_paddr {
+    my $l3      = shift;
+    my $partial = shift;
+
+    return $l3->orig_at_paddr($partial) || $l3->old_at_paddr($partial);
+}
+
+sub at_netaddr {
+    my $l3      = shift;
+    my $partial = shift;
+
+    return $l3->orig_at_netaddr($partial) || $l3->old_at_netaddr($partial);
+}
+
 1;
+
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3 - Perl5 Interface to network devices serving Layer3 or Layers 2 & 3
+SNMP::Info::Layer3 - SNMP Interface to network devices serving Layer3 or
+Layers 2 & 3
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -262,14 +364,13 @@ Max Baker (C<max@warped.org>)
  my $l3 = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $l3->class();
+ my $class = $l3->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
  # Let's get some basic Port information
@@ -285,14 +386,15 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-This class is usually used as a superclass for more specific device classes listed under 
-SNMP::Info::Layer3::*   Please read all docs under SNMP::Info first.
+This class is usually used as a superclass for more specific device classes
+listed under SNMP::Info::Layer3::*   Please read all docs under SNMP::Info
+first.
 
 Provides generic methods for accessing SNMP data for Layer 3 network devices. 
 Includes support for Layer2+3 devices. 
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $l3 = new SNMP::Info::Layer3(...);
 
@@ -302,33 +404,43 @@ a more specific class using the method above.
 
 =item SNMP::Info
 
-=item SNMP::Info::Bridge
-
-=item SNMP::Info::CDP
-
-=item SNMP::Info::CiscoStats
+=item SNMP::Info::Bridge (For L2/L3 devices)
 
 =item SNMP::Info::EtherLike
 
+=item SNMP::Info::Entity
+
+=item SNMP::Info::PowerEthernet
+
+=item SNMP::Info::IPv6
+
 =back
 
 =head2 Required MIBs
 
 =over
 
-=item CISCO-PRODUCTS-MIB
+=item F<IP-MIB>
 
-=item ENTITY-MIB
+=item F<OSPF-MIB>
 
-=item OSPF-MIB
-
-=item Inherited Classes
-
-MIBs required by the inherited classes listed above.
+=item F<BGP4-MIB>
 
 =back
 
-MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz
+=head2 Inherited MIBs
+
+See L<SNMP::Info/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Bridge/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::EtherLike/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Entity/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::PowerEthernet/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IPv6/"Required MIBs"> for its MIB requirements.
 
 =head1 GLOBALS
 
@@ -336,21 +448,27 @@ These are methods that return scalar value from SNMP
 
 =over
 
-=item $l3->chassis()
-
-Returns Chassis type (model).
-
-(B<entPhysicalDescr.1>)
-
 =item $l3->mac()
 
 Returns root port mac address
 
-(B<ifPhysAddress.1>)
+(C<ifPhysAddress.1>)
 
 =item $l3->router_ip()
 
-(B<ospfRouterId.0>)
+(C<ospfRouterId.0>)
+
+=item $l3->bgp_id()
+
+(C<bgpIdentifier.0>)
+
+Returns the BGP identifier of the local system
+
+=item $l3->bgp_local_as()
+
+Returns the local autonomous system number 
+
+(C<bgpLocalAs.0>)
 
 =back
 
@@ -360,41 +478,44 @@ Returns root port mac address
 
 =item $l3->model()
 
-Trys to reference $l3->id() to one of the product MIBs listed above
+Tries to reference $l3->id() to one of the product MIBs listed above
 
 Removes 'cisco'  from cisco devices for readability.
 
 =item $l3->serial()
 
-Trys to cull a serial number from $l3->chassis()
+Tries to cull a serial number from F<ENTITY-MIB>, description, and
+F<OLD-CISCO->... MIB.
 
 =item $l3->vendor()
 
-Trys to cull a Vendor name from B<sysDescr>
+Tries to cull a Vendor name from C<sysDescr>
+
+=item $l3->root_ip()
+
+Returns the primary IP used to communicate with the device.  Returns the first
+found:  OSPF Router ID (C<ospfRouterId>) or any OSPF Host IP Address
+(C<ospfHostIpAddress>).
 
 =back
 
 =head2 Globals imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See L<SNMP::Info/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Bridge
+=head2 Global Methods imported from SNMP::Info::Bridge
 
-See documentation in SNMP::Info::Bridge for details.
+See L<SNMP::Info::Bridge/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CDP
+=head2 Global Methods imported from SNMP::Info::EtherLike
 
-See documentation in SNMP::Info::CDP for details.
+See L<SNMP::Info::EtherLike/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::CiscoStats
+=head2 Global Methods imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::CiscoStats for details.
+See L<SNMP::Info::Entity/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::EtherLike
-
-See documentation in SNMP::Info::EtherLike for details.
-
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -405,7 +526,8 @@ to a hash.
 
 =item $l3->interfaces()
 
-Returns the map between SNMP Interface Identifier (iid) and physical port name. 
+Returns the map between SNMP Interface Identifier (iid) and physical port
+name. 
 
 Only returns those iids that have a description listed in $l3->i_description()
 
@@ -419,7 +541,7 @@ Currently looks for tunnel,loopback,lo,null from $l3->interfaces()
 
 Returns reference to hash of iid to human set name. 
 
-Defaults to B<ifName>, but checks for an B<ifAlias>
+Defaults to C<ifName>, but checks for an C<ifAlias>
 
 =item $l3->i_duplex()
 
@@ -428,52 +550,244 @@ Returns reference to hash of iid to current link duplex setting.
 Maps $l3->el_index() to $l3->el_duplex, then culls out 
 full,half, or auto and sets the map to that value. 
 
-see SNMP::Info::Etherlike for the el_index() and el_duplex() methods.
+See L<SNMP::Info::Etherlike> for the el_index() and el_duplex() methods.
 
 =back
 
-=head2 ARP Cache Entries
+=head2 F<IP-MIB> Arp Cache Table (C<ipNetToMediaTable>)
 
 =over
 
 =item $l3->at_index()
 
-Returns reference to map of IID to Arp Cache Entry
+Returns reference to hash.  Maps ARP table entries to Interface IIDs 
 
-(B<atIfIndex>)
+(C<ipNetToMediaIfIndex>)
+
+If the device doesn't support C<ipNetToMediaIfIndex>, this will try
+the deprecated C<atIfIndex>.
 
 =item $l3->at_paddr()
 
-Returns reference to hash of Arp Cache Entries to MAC address
+Returns reference to hash.  Maps ARP table entries to MAC addresses. 
 
-(B<atPhysAddress>)
+(C<ipNetToMediaPhysAddress>)
+
+If the device doesn't support C<ipNetToMediaPhysAddress>, this will try
+the deprecated C<atPhysAddress>.
 
 =item $l3->at_netaddr()
 
+Returns reference to hash.  Maps ARP table entries to IP addresses. 
+
+(C<ipNetToMediaNetAddress>)
+
+If the device doesn't support C<ipNetToMediaNetAddress>, this will try
+the deprecated C<atNetAddress>.
+
+=back
+
+=head2 ARP Cache Entries
+
+The C<atTable> has been deprecated since 1991.  You should never need
+to use these methods.  See C<ipNetToMediaTable> above.
+
+=over
+
+=item $l3->old_at_index()
+
+Returns reference to map of IID to Arp Cache Entry
+
+(C<atIfIndex>)
+
+=item $l3->old_at_paddr()
+
+Returns reference to hash of Arp Cache Entries to MAC address
+
+(C<atPhysAddress>)
+
+=item $l3->old_at_netaddr()
+
 Returns reference to hash of Arp Cache Entries to IP Address
 
-(B<atNetAddress>)
+(C<atNetAddress>)
+
+=back
+
+=head2 BGP Peer Table (C<bgpPeerTable>)
+
+=over
+
+=item $l3->bgp_peers()
+
+Returns reference to hash of BGP peer to local IP address
+
+(C<bgpPeerLocalAddr>)
+
+=item $l3->bgp_peer_id()
+
+Returns reference to hash of BGP peer to BGP peer identifier
+
+(C<bgpPeerIdentifier>)
+
+=item $l3->bgp_peer_state()
+
+Returns reference to hash of BGP peer to BGP peer state
+
+(C<bgpPeerState>)
+
+=item $l3->bgp_peer_as()
+
+Returns reference to hash of BGP peer to BGP peer autonomous system number
+
+(C<bgpPeerRemoteAs>)
+
+=item $l3->bgp_peer_addr()
+
+Returns reference to hash of BGP peer to BGP peer IP address
+
+(C<bgpPeerRemoteAddr>)
+
+=item $l3->bgp_peer_fsm_est_trans()
+
+Returns reference to hash of BGP peer to the total number of times the BGP FSM
+transitioned into the established state
+
+(C<bgpPeerFsmEstablishedTransitions>)
+
+=item $l3->bgp_peer_in_tot_msgs()
+
+Returns reference to hash of BGP peer to the total number of messages received
+from the remote peer on this connection
+
+(C<bgpPeerInTotalMessages>)
+
+=item $l3->bgp_peer_in_upd_el_time()
+
+Returns reference to hash of BGP peer to the elapsed time in seconds since
+the last BGP UPDATE message was received from the peer.
+
+(C<bgpPeerInUpdateElapsedTime>)
+
+=item $l3->bgp_peer_in_upd()
+
+Returns reference to hash of BGP peer to the number of BGP UPDATE messages
+received on this connection
+
+(C<bgpPeerInUpdates>)
+
+=item $l3->bgp_peer_out_tot_msgs()
+
+Returns reference to hash of BGP peer to the total number of messages
+transmitted to the remote peer on this connection
+
+(C<bgpPeerOutTotalMessages>)
+
+=item $l3->bgp_peer_out_upd()
+
+Returns reference to hash of BGP peer to the number of BGP UPDATE messages
+transmitted on this connection
+
+(C<bgpPeerOutUpdates>)
+
+=back
+
+=head2 OSPF Interface Table (C<ospfIfTable>)
+
+=over
+
+=item $l3->ospf_if_ip()
+
+Returns reference to hash of OSPF interface IP addresses
+
+(C<ospfIfIpAddress>)
+
+=item $l3->ospf_if_area()
+
+Returns reference to hash of the OSPF area to which the interfaces connect
+
+(C<ospfIfAreaId>)
+
+=item $l3->ospf_if_type()
+
+Returns reference to hash of the OSPF interfaces' type
+
+(C<ospfIfType>)
+
+=item $l3->ospf_if_hello()
+
+Returns reference to hash of the OSPF interfaces' hello interval
+
+(C<ospfIfHelloInterval>)
+
+=item $l3->ospf_if_dead()
+
+Returns reference to hash of the OSPF interfaces' dead interval
+
+(C<ospfIfRtrDeadInterval>)
+
+=item $l3->ospf_if_admin()
+
+Returns reference to hash of the OSPF interfaces' administrative status
+
+(C<ospfIfAdminStat>)
+
+=item $l3->ospf_if_state()
+
+Returns reference to hash of the OSPF interfaces' state
+
+(C<ospfIfState>)
+
+=back
+
+=head2 OSPF Neighbor Table (C<ospfNbrTable>)
+
+=over
+
+=item $l3->ospf_peers()
+
+Returns reference to hash of IP addresses the neighbor is using in its
+IP Source Addresses
+
+(C<ospfNbrIpAddr>)
+
+=item $l3->ospf_peer_id()
+
+Returns reference to hash of neighbor Router IDs
+
+(C<ospfNbrRtrId>)
+
+=item $l3->ospf_peer_state()
+
+Returns reference to hash of state of the relationship with the neighbor
+routers
+
+(C<ospfNbrState>)
 
 =back
 
 =head2 Table Methods imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See L<SNMP::Info/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::Bridge
 
-See documentation in SNMP::Info::Bridge for details.
-
-=head2 Table Methods imported from SNMP::Info::CDP
-
-See documentation in SNMP::Info::CDP for details.
-
-=head2 Table Methods imported from SNMP::Info::CiscoStats
-
-See documentation in SNMP::Info::CiscoStats for details.
+See L<SNMP::Info::Bridge/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::EtherLike
 
-See documentation in SNMP::Info::EtherLike for details.
+See L<SNMP::Info::EtherLike/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Entity
+
+See L<SNMP::Info::Entity/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::PowerEthernet
+
+See L<SNMP::Info::PowerEthernet/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::IPv6
+
+See L<SNMP::Info::IPv6/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/Aironet.pm

@@ -1,88 +1,89 @@
 # SNMP::Info::Layer3::Aironet
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::Aironet;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info::Layer3;
 
-use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
-@SNMP::Info::Layer3::Aironet::ISA = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Aironet::ISA       = qw/SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer3::Aironet::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$INIT = 0;
-%MIBS =    (
-            %SNMP::Info::Layer3::MIBS,
-            'AWCVX-MIB'        => 'awcIfTable',
-            'IEEE802dot11-MIB' => 'dot11StationID',
-           );
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'AWCVX-MIB'        => 'awcIfTable',
+    'IEEE802dot11-MIB' => 'dot11StationID',
+);
 
 %GLOBALS = (
-            %SNMP::Info::Layer3::GLOBALS,
-            'mac'               => 'dot11StationID.2',
-            # AWC Ethernet Table
-            'awc_duplex'        => 'awcEtherDuplex.0',
-           );
+    %SNMP::Info::Layer3::GLOBALS,
+    'mac' => 'dot11StationID.2',
 
-%FUNCS = (  
-            %SNMP::Info::Layer3::FUNCS,
-            'i_mac2'    => 'ifPhysAddress',
-            'i_mtu2'    => 'ifMtu',
-            'i_ssid'    => 'dot11DesiredSSID',
-            # Bridge-mib overrides  
-            'fw_mac2'    => 'dot1dTpFdbAddress',
-            'fw_port2'   => 'dot1dTpFdbPort',
-            'bp_index2'  => 'dot1dBasePortIfIndex',
-            # AWC Interface Table (awcIfTable)
-            'awc_default_mac'   => 'awcIfDefaultPhyAddress',
-            'awc_mac'           => 'awcIfPhyAddress',
-            'awc_ip'            => 'awcIfIpAddress',
-            'awc_netmask'       => 'awcIfIpNetMask',
-            'awc_msdu'           => 'awcIfMSDUMaxLength',
-          );
+    # AWC Ethernet Table
+    'awc_duplex' => 'awcEtherDuplex.0',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    'i_mac2' => 'ifPhysAddress',
+    'i_mtu2' => 'ifMtu',
+    'i_ssid' => 'dot11DesiredSSID',
+
+    # Bridge-mib overrides
+    'fw_mac2'   => 'dot1dTpFdbAddress',
+    'fw_port2'  => 'dot1dTpFdbPort',
+    'bp_index2' => 'dot1dBasePortIfIndex',
+
+    # AWC Interface Table (awcIfTable)
+    'awc_default_mac' => 'awcIfDefaultPhyAddress',
+    'awc_mac'         => 'awcIfPhyAddress',
+    'awc_ip'          => 'awcIfIpAddress',
+    'awc_netmask'     => 'awcIfIpNetMask',
+    'awc_msdu'        => 'awcIfMSDUMaxLength',
+);
 
 %MUNGE = (
-          # Inherit all the built in munging
-          %SNMP::Info::Layer3::MUNGE,
-          'i_mac2'      => \&SNMP::Info::munge_mac,
-          'awc_mac'     => \&SNMP::Info::munge_mac,
-          'fw_mac2'     => \&SNMP::Info::munge_mac,
-         );
+
+    # Inherit all the built in munging
+    %SNMP::Info::Layer3::MUNGE,
+    'i_mac2'  => \&SNMP::Info::munge_mac,
+    'awc_mac' => \&SNMP::Info::munge_mac,
+    'fw_mac2' => \&SNMP::Info::munge_mac,
+);
 
 sub os {
     return 'aironet';
@@ -90,35 +91,35 @@ sub os {
 
 sub os_ver {
     my $aironet = shift;
-    my $descr = $aironet->description();
+    my $descr = $aironet->description() || '';
 
     # CAP340 11.21, AP4800-E 11.21
-    if ($descr =~ /AP\d{3,4}(-\D+)?\s+(\d{2}\.\d{2})/){
+    if ( $descr =~ /AP\d{3,4}(-\D+)?\s+(\d{2}\.\d{2})/ ) {
         return $2;
     }
-    
-    if ($descr =~ /Series\s*AP\s+(\d{2}\.\d{2})/){
+
+    if ( $descr =~ /Series\s*AP\s+(\d{2}\.\d{2})/ ) {
         return $1;
     }
 
-    return undef;
+    return;
 }
 
 # Override wireless port with static info
 sub bp_index {
-    my $aironet = shift;
+    my $aironet    = shift;
     my $interfaces = $aironet->interfaces();
-    my $bp_index = $aironet->bp_index2();
-    
-    foreach my $iid (keys %$interfaces){
+    my $bp_index   = $aironet->bp_index2();
+
+    foreach my $iid ( keys %$interfaces ) {
         my $port = $interfaces->{$iid};
 
         # Hardwire the wireless port to the transparent bridge port
-        if ($port =~ /awc/){
-            $bp_index->{0}=$iid;
+        if ( $port =~ /awc/ ) {
+            $bp_index->{0} = $iid;
         }
     }
-    
+
     return $bp_index;
 }
 
@@ -127,16 +128,16 @@ sub fw_mac {
     my $aironet = shift;
     my $fw_mac  = $aironet->fw_mac2();
     my $fw_port = $aironet->fw_port2();
-    my $bs_mac  = $aironet->bs_mac();    
- 
+    my $bs_mac  = $aironet->bs_mac();
+
     # remove port 0 forwarding table entries, only port 0 static entries
-    foreach my $fw (keys %$fw_mac){
+    foreach my $fw ( keys %$fw_mac ) {
         my $port = $fw_port->{$fw};
         next unless defined $port;
         delete $fw_mac->{$fw} if $port == 0;
     }
 
-    foreach my $bs (keys %$bs_mac){
+    foreach my $bs ( keys %$bs_mac ) {
         my $entry = $bs;
         $entry =~ s/\.0$//;
         $fw_mac->{$entry} = $bs_mac->{$bs};
@@ -149,10 +150,9 @@ sub fw_mac {
 sub fw_port {
     my $aironet = shift;
     my $fw_port = $aironet->fw_port2();
-    my $bs_port = $aironet->bs_port();    
+    my $bs_port = $aironet->bs_port();
 
-
-    foreach my $bs (keys %$bs_port){
+    foreach my $bs ( keys %$bs_port ) {
         my $entry = $bs;
         $entry =~ s/\.0$//;
         $fw_port->{$entry} = $bs_port->{$bs};
@@ -161,18 +161,17 @@ sub fw_port {
     return $fw_port;
 }
 
-
 sub i_duplex {
-    my $aironet = shift;
+    my $aironet    = shift;
     my $interfaces = $aironet->interfaces();
     my $awc_duplex = $aironet->awc_duplex();
-    
+
     my %i_duplex;
 
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $name = $interfaces->{$iid};
 
-        if ($name =~ /fec/){
+        if ( $name =~ /fec/ ) {
             $i_duplex{$iid} = $awc_duplex;
         }
     }
@@ -186,7 +185,7 @@ sub i_mac {
     my $i_mac   = $aironet->i_mac2();
     my $awc_mac = $aironet->awc_mac();
 
-    foreach my $iid (keys %$awc_mac){
+    foreach my $iid ( keys %$awc_mac ) {
         next unless defined $i_mac->{$iid};
         $i_mac->{$iid} = $awc_mac->{$iid};
     }
@@ -195,14 +194,14 @@ sub i_mac {
 }
 
 sub i_ignore {
-    my $aironet = shift;
+    my $aironet    = shift;
     my $interfaces = $aironet->interfaces();
 
     my %i_ignore;
-    foreach my $if (keys %$interfaces){
-        $i_ignore{$if}++ if ($interfaces->{$if} =~ /(rptr|lo)/);
+    foreach my $if ( keys %$interfaces ) {
+        $i_ignore{$if}++ if ( $interfaces->{$if} =~ /(rptr|lo)/ );
     }
-    
+
     return \%i_ignore;
 }
 
@@ -216,11 +215,12 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Aironet - Perl5 Interface to Cisco Aironet Wireless Devices running Aironet software, not IOS
+SNMP::Info::Layer3::Aironet - Perl5 Interface to Cisco Aironet Wireless
+Devices running Aironet software, not IOS
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -228,7 +228,6 @@ Max Baker (C<max@warped.org>)
  my $aironet = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -240,8 +239,8 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-SNMP::Info subclass to provide access to SNMP data for an Aironet device running Aironet software,
-not cisco IOS.
+SNMP::Info subclass to provide access to SNMP data for an Aironet device
+running Aironet software, not cisco IOS.
 
 Note there are two classes for Aironet devices :
 
@@ -257,8 +256,8 @@ This class is for devices running Cisco IOS software (newer)
 
 =back
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $aironet = new SNMP::Info::Layer3::Aironet(...);
 
@@ -274,14 +273,14 @@ a more specific class using the method above.
 
 =over
 
-=item AWCVX-MIB
+=item F<AWCVX-MIB>
 
-=item IEEE802dot11-MIB
+=item F<IEEE802dot11-MIB>
 
 =back
 
-These MIBs are now included in the v2.tar.gz archive available from ftp.cisco.com.  Make sure you 
-have a current version. 
+These MIBs are now included in the v2.tar.gz archive available from
+ftp.cisco.com.  Make sure you have a current version. 
 
 =head1 GLOBALS
 
@@ -293,13 +292,13 @@ These are methods that return scalar value from SNMP
 
 Gives the admin duplex setting for the Ethernet Port.
 
-B<awcEtherDuplex.0>
+C<awcEtherDuplex.0>
 
 =item $aironet->mac()
 
 Gives the MAC Address of the wireless side 
 
-B<dot11StationID.2>
+C<dot11StationID.2>
 
 =item $aironet->os()
 
@@ -317,9 +316,9 @@ Returns 'cisco'.
 
 =head2 Globals imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info::Layer3 for details.
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -330,18 +329,18 @@ to a hash.
 
 =item $aironet->bp_index()
 
-Takes the bp_index() value from SNMP::Info::Bridge and overrides the wireless port 
-to be assigned to the transparent bridge port (port 0)
+Takes the bp_index() value from SNMP::Info::Bridge and overrides the wireless
+port to be assigned to the transparent bridge port (port 0)
 
 =item $aironet->fw_mac()
 
-Adds static table entries from bs_mac() to port 0 so that wireless MAC addresses will
-be reported.  Forwarding table entries for port 0 are removed.
+Adds static table entries from bs_mac() to port 0 so that wireless MAC
+addresses will be reported.  Forwarding table entries for port 0 are removed.
 
 =item $aironet->fw_port()
 
-Adds the static table port mappings to the forwarding table port mappings by adding 
-bs_port() to fw_port()
+Adds the static table port mappings to the forwarding table port mappings by
+adding bs_port() to fw_port()
 
 =item $aironet->i_duplex()
 
@@ -365,34 +364,34 @@ Ignores ports that are of type ``rptr'' and ``lo''.
 
 Gives the default MAC address of each interface.
 
-B<awcIfDefaultPhyAddress>
+C<awcIfDefaultPhyAddress>
 
 =item $aironet->awc_mac()
 
 Gives the actual MAC address of each interface.
 
-B<awcIfPhyAddress>
+C<awcIfPhyAddress>
 
 =item $aironet->awc_ip()
 
 Gives the IP Address assigned to each interface.
 
-B<awcIfIpAddress>
+C<awcIfIpAddress>
 
 =item $aironet->awc_netmask()
 
 Gives the NetMask for each interface.
 
-B<awcIfIpNetMask>
+C<awcIfIpNetMask>
 
 =item $aironet->awc_msdu()
 
-B<awcIfMSDUMaxLength>
+C<awcIfMSDUMaxLength>
 
 =back
 
 =head2 Table Methods imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info::Layer3 for details.
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/AlcatelLucent.pm

@@ -0,0 +1,489 @@
+# SNMP::Info::Layer3::AlcatelLucent
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::AlcatelLucent;
+
+use strict;
+
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+use SNMP::Info::AMAP;
+# Use LLDP
+# (or at least try.  The versions I've seen have two problems:
+# 1. they report ifIndex values as 'local'; we don't support ifIndex
+#    but *could*
+# 2. They report 0.0.0.0 as the management address
+# )
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::AlcatelLucent::ISA = qw/SNMP::Info::AMAP SNMP::Info::LLDP
+    SNMP::Info::MAU SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::AlcatelLucent::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::AMAP::MIBS,
+    'ALCATEL-IND1-DEVICES'     => 'familyOmniSwitch7000',
+    'ALCATEL-IND1-CHASSIS-MIB' => 'chasEntPhysOperStatus',
+    'ALU-POWER-ETHERNET-MIB'   => 'pethPsePortDetectionStatus',
+);
+
+# Alcatel provides their own version of the POWER-ETHERNET-MIB,
+# off in vendor-space, without renaming any of the objects.
+# This means we have to *not* load the POWER-ETHERNET-MIB
+# but can then still use the standard PowerEthernet module,
+# but cannot try both so we hope Alcatel doesn't stop supporting
+# their private version even if they get around to supporting the
+# standard.
+delete $MIBS{'POWER-ETHERNET-MIB'};
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS, %SNMP::Info::AMAP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS, %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::LLDP::FUNCS, %SNMP::Info::AMAP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE, %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::LLDP::MUNGE, %SNMP::Info::AMAP::MUNGE,
+);
+
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::AlcatelLucent::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::AlcatelLucent::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub model {
+    my $alu   = shift;
+    my $id    = $alu->id();
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^device//;
+
+    return $model;
+}
+
+sub os {
+    return 'AOS';
+}
+
+sub vendor {
+    return 'alcatel-lucent';
+}
+
+sub os_ver {
+    my $alu = shift;
+
+    my $descr = $alu->description();
+    if ( $descr =~ m/^(\S+)/ ) {
+        return $1;
+    }
+
+    # No clue what this will try but hey
+    return $alu->SUPER::os_ver();
+}
+
+# ps1_type, ps1_status, ps2_type, ps2_status:
+# Find the list of power supplies in the ENTITY-MIB
+# e_class = powerSupply
+# e_descr = ps_type
+# chasEntPhysOperStatus = ps_status
+sub _power_supplies {
+    my $alu = shift;
+
+    my $e_class  = $alu->e_class();
+    my @supplies = ();
+
+    foreach my $key ( sort { int($a) cmp int($b) } keys %$e_class ) {
+        if ( $e_class->{$key} eq 'powerSupply' ) {
+            push( @supplies, int($key) );
+        }
+    }
+    return @supplies;
+}
+
+sub _ps_type {
+    my $alu   = shift;
+    my $psnum = shift;
+    my @ps    = $alu->_power_supplies();
+
+    if ( $psnum > $#ps ) {
+        return "none";
+    }
+    my $supply = $ps[$psnum];
+    my $descr  = $alu->e_descr($supply);
+    return $descr->{$supply};
+}
+
+sub _ps_status {
+    my $alu   = shift;
+    my $psnum = shift;
+    my @ps    = $alu->_power_supplies();
+
+    if ( $psnum > $#ps ) {
+        return "not present";
+    }
+    my $supply = $ps[$psnum];
+    my $status = $alu->chasEntPhysOperStatus($supply);
+    return $status->{$supply};
+}
+
+sub ps1_type {
+    my $alu = shift;
+    return $alu->_ps_type(0);
+}
+
+sub ps2_type {
+    my $alu = shift;
+    return $alu->_ps_type(1);
+}
+
+sub ps1_status {
+    my $alu = shift;
+    return $alu->_ps_status(0);
+}
+
+sub ps2_status {
+    my $alu = shift;
+    return $alu->_ps_status(1);
+}
+
+# The interface description contains the software version, so
+# to avoid losing historical information through a software upgrade
+# we use interface name instead.
+sub interfaces {
+    my $alu     = shift;
+    my $partial = shift;
+
+    return $alu->orig_i_name($partial);
+}
+
+# Use Q-BRIDGE-MIB
+sub fw_mac {
+    my $alu     = shift;
+    my $partial = shift;
+
+    return $alu->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $alu     = shift;
+    my $partial = shift;
+
+    return $alu->qb_fw_port($partial);
+}
+
+# Work around buggy bp_index in 6.3.1.871.R01 and 6.3.1.975.R01
+sub bp_index {
+    my $alu     = shift;
+    my $partial = shift;
+
+    my $bp_index = $alu->SUPER::bp_index($partial);
+
+    #
+    # This device sometimes reports an ifIndex and sometimes reports
+    # dot1dBasePort for the dot1d port values - e.g.,
+    # in 6.3.1.871.R01 both dot1dTpFdbPort and dot1qTpFdbPort report
+    # the ifIndex; in 6.3.1.975.R01 dot1dTpFdbPort has been updated
+    # to report the dot1dBasePort but dot1qTpFdbPort still returns an
+    # ifIndex.  For this reason, we augment the dot1dBasePort
+    # mapping with ifIndex->ifIndex mappings -- we can do this because
+    # the ifIndex and dot1dBasePort spaces don't overlap, at least for
+    # the ports we care about.
+    my @keys = keys %$bp_index;
+    foreach my $idx (@keys) {
+        my $ifIndex = $bp_index->{$idx};
+        $bp_index->{$ifIndex} = $ifIndex;
+    }
+
+    #
+    # In addition, aggregates aren't reported at all in bp_index.
+    # We grab them from i_index.
+    my $i_index = $alu->i_index();
+    foreach my $idx ( keys %$i_index ) {
+        my $ifIndex = $i_index->{$idx};
+        if ( int($ifIndex) > 40000001 ) {
+            $bp_index->{$ifIndex} = $ifIndex;
+
+            # dot1dTpFdbPort seems to use 4098, 4099, 4100 for
+            # 40000001, 40000002, 40000003.  I guess this is
+            # 4096 + 1 + aggregate number.
+            my $tmp = sprintf( "%d", int($ifIndex) - 39995903 );
+            $bp_index->{$tmp} = $ifIndex;
+        }
+    }
+    return $bp_index;
+}
+
+# Workaround for unimplemented Q-BRIDGE-MIB::dot1qPvid
+# If there is only one VLAN on which a given port is output
+# untagged, then call that one the PVID.  This is a guess that
+# works in obvious configurations but may be wrong in
+# subtle cases (like there's one output VLAN but a different
+# input one - the only way to know that is via the dot1qPvid
+# object)
+#
+# Newer versions have implemented dot1qPvid (but wrong, but
+# that's just life)
+#sub i_vlan {
+#    my $alu = shift;
+#
+#    my $qb_v_untagged = $alu->qb_v_untagged();
+#    my $bp_index = $alu->bp_index();
+#    my $vlan_list = {};
+#    foreach my $vlan (keys %$qb_v_untagged) {
+#	my $portlist = $qb_v_untagged->{$vlan};
+#	my $port;
+#	for ($port = 0; $port <= $#$portlist; $port++) {
+#	    if ($portlist->[$port]) {
+#		my $ifindex = $bp_index->{$port + 1};
+#		if ($ifindex) {
+#		    push(@{$vlan_list->{$ifindex}}, int($vlan));
+#		}
+#	    }
+#	}
+#    }
+#
+#    my $i_vlan = {};
+#    foreach my $ifindex (keys %$vlan_list) {
+#	if ($#{$vlan_list->{$ifindex}} == 0) {
+#	    $i_vlan->{$ifindex} = ${$vlan_list->{$ifindex}}[0];
+#	}
+#    }
+#    return $i_vlan;
+#}
+
+# Power-Ethernet ifIndex mapping.  I've only seen this from a
+# fixed-config single-module system, so this is only a plausible
+# guess as to the mapping on a stack or modular system.
+sub peth_port_ifindex {
+    my $alu     = shift;
+    my $partial = shift;
+
+    my $peth_port_status  = $alu->peth_port_status($partial);
+    my $peth_port_ifindex = {};
+
+    foreach my $key ( keys %$peth_port_status ) {
+        my @oid = split( m/\./, $key );
+        $peth_port_ifindex->{$key} = int( $oid[0] ) * 1000 + int( $oid[1] );
+    }
+    return $peth_port_ifindex;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::AlcatelLucent - SNMP Interface to Alcatel-Lucent OmniSwitch
+
+=head1 AUTHOR
+
+Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $alu = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $alu->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Alcatel-Lucent OmniSwitch devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::MAU
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<ALCATEL-IND1-DEVICES>
+
+=item F<ALCATEL-IND1-CHASSIS-MIB>
+
+=item F<ALU-POWER-ETHERNET-MIB>
+
+Note that Alcatel-Lucent distributes their own proprietary version of the
+F<POWER-ETHERNET-MIB>, but the MIB module name that they distribute is
+simply F<POWER-ETHERNET-MIB>.  This module must be hand-edited to change the
+module name to F<ALU-POWER-ETHERNET-MIB> so that it can be used simultaneously
+with the standard F<POWER-ETHERNET-MIB>.
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $alu->vendor()
+
+    Returns 'alcatel-lucent'
+
+=item $alu->model()
+
+Tries to reference $alu->id() to one of the product MIBs listed above
+
+Removes 'device' from the name for readability.
+
+=item $alu->os()
+
+Returns 'AOS'
+
+=item $alu->os_ver()
+
+Grabs the os version from C<sysDescr>
+
+=item $alu->ps1_type()
+
+Return the type of the first power supply from the F<ENTITY-MIB>
+
+=item $alu->ps2_type()
+
+Return the type of the second power supply from the F<ENTITY-MIB>
+
+=item $alu->ps1_status()
+
+Return the status of the first power supply from the F<ALCATEL-IND1-CHASSIS-MIB>
+
+=item $alu->ps2_status()
+
+Return the status of the second power supply from the F<ALCATEL-IND1-CHASSIS-MIB>
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $alu->interfaces()
+
+Returns interface name from C<ifName>, since the default return value
+of C<ifDescr> includes the OS version.
+
+=item $alu->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $alu->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $alu->bp_index()
+
+Work around various bugs in the F<BRIDGE-MIB> and
+F<Q-BRIDGE-MIB> implementations, by returning both
+C<ifIndex> and C<dot1dBasePort> mappings to C<ifIndex> values.
+
+=item $alu->i_duplex_admin()
+
+Returns info from F<MAU-MIB>
+
+=item $alu->i_speed_admin()
+
+Returns info from F<MAU-MIB>
+
+=item $alu->peth_port_ifindex()
+
+Returns the C<ifIndex> value for power-ethernet ports
+using the OmniSwitch algorithm.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/AlteonAD.pm

@@ -1,148 +1,215 @@
 # SNMP::Info::Layer3::AlteonAD
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker
+# Copyright (c) 2008 Eric Miller
 # All Rights Reserved
 #
-# Redistribution and use in source and binary forms, with or without 
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::AlteonAD;
-$VERSION = 0.9;
 
 use strict;
-
 use Exporter;
-use SNMP::Info;
-use SNMP::Info::Bridge;
+use SNMP::Info::Layer3;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE /;
-
-@SNMP::Info::Layer3::AlteonAD::ISA = qw/SNMP::Info SNMP::Info::Bridge Exporter/;
+@SNMP::Info::Layer3::AlteonAD::ISA       = qw/SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer3::AlteonAD::EXPORT_OK = qw//;
 
-$DEBUG=0;
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
 
 %MIBS = (
-          %SNMP::Info::MIBS,
-          %SNMP::Info::Bridge::MIBS,
-	  'ALTEON-TIGON-SWITCH-MIB' => 'agSoftwareVersion',
-	  'ALTEON-TS-PHYSICAL-MIB'  => 'agPortTableMaxEnt',
-	  'ALTEON-TS-NETWORK-MIB'   => 'agPortTableMaxEnt',
-        );
+    %SNMP::Info::Layer3::MIBS,
+    'ALTEON-ROOT-MIB'            => 'aceswitch184',
+    'ALTEON-TIGON-SWITCH-MIB'    => 'hwPowerSupplyStatus',
+    'ALTEON-CHEETAH-SWITCH-MIB'  => 'hwFanStatus',
+    'ALTEON-TS-PHYSICAL-MIB'     => 'agPortTableMaxEnt',
+    'ALTEON-CS-PHYSICAL-MIB'     => 'vlanCurCfgLearn',
+    'ALTEON-TS-NETWORK-MIB'      => 'ripCurCfgSupply',
+    'ALTEON-CHEETAH-NETWORK-MIB' => 'ripCurCfgIntfSupply',
+);
 
 %GLOBALS = (
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-	    'sw_ver'	   => 'agSoftwareVersion',
-	    'tftp_action'  => 'agTftpAction',
-	    'tftp_host'    => 'agTftpServer',
-            'tftp_file'    => 'agTftpCfgFileName',
-            'tftp_result'  => 'agTftpLastActionStatus',
-           );
+    %SNMP::Info::Layer3::GLOBALS,
+    'old_sw_ver'      => 'ALTEON_TIGON_SWITCH_MIB__agSoftwareVersion',
+    'new_sw_ver'      => 'ALTEON_CHEETAH_SWITCH_MIB__agSoftwareVersion',
+    'old_tftp_action' => 'ALTEON_TIGON_SWITCH_MIB__agTftpAction',
+    'new_tftp_action' => 'ALTEON_CHEETAH_SWITCH_MIB__agTftpAction',
+    'old_tftp_host'   => 'ALTEON_TIGON_SWITCH_MIB__agTftpServer',
+    'new_tftp_host'   => 'ALTEON_CHEETAH_SWITCH_MIB__agTftpServer',
+    'old_tftp_file'   => 'ALTEON_TIGON_SWITCH_MIB__agTftpCfgFileName',
+    'new_tftp_file'   => 'ALTEON_CHEETAH_SWITCH_MIB__agTftpCfgFileName',
+    'old_tftp_result' => 'ALTEON_TIGON_SWITCH_MIB__agTftpLastActionStatus',
+    'new_tftp_result' => 'ALTEON_CHEETAH_SWITCH_MIB__agTftpLastActionStatus',
+    'old_ip_max'      => 'ALTEON_TS_NETWORK_MIB__ipInterfaceTableMax',
+    'new_ip_max'      => 'ALTEON_CHEETAH_NETWORK_MIB__ipInterfaceTableMax',
+    'fan'             => 'ALTEON_CHEETAH_SWITCH_MIB__hwFanStatus',
+    'old_ps1_stat'    => 'ALTEON_TIGON_SWITCH_MIB__hwPowerSupplyStatus',
+    'old_ps2_stat'    => 'ALTEON_TIGON_SWITCH_MIB__hwRedundantPSStatus',
+    'new_ps_stat'     => 'ALTEON_CHEETAH_SWITCH_MIB__hwPowerSupplyStatus',
+);
 
 %FUNCS = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-	    'bp_index_2'  => 'dot1dBasePortIfIndex',
-	    'i_name2'    => 'ifName',
-            # From RFC1213-MIB
-            'at_index'    => 'ipNetToMediaIfIndex',
-            'at_paddr'    => 'ipNetToMediaPhysAddress',
-            'at_netaddr'  => 'ipNetToMediaNetAddress',
-            # From agPortCurCfgTable
-            'ag_p_cfg_idx'        => 'agPortCurCfgIndx',
-            'ag_p_cfg_pref'       => 'agPortCurCfgPrefLink',
-            'ag_p_cfg_pvid'       => 'agPortCurCfgPVID',
-            'ag_p_cfg_fe_auto'    => 'agPortCurCfgFastEthAutoNeg',
-            'ag_p_cfg_fe_mode'    => 'agPortCurCfgFastEthMode',
-            'ag_p_cfg_ge_auto'    => 'agPortCurCfgGigEthAutoNeg',
-            'ag_p_cfg_name'       => 'agPortCurCfgPortName',
-            # From portInfoTable
-            'p_info_idx'     => 'portInfoIndx',
-            'p_info_mode'    => 'portInfoMode',
-            # From portInfoTable
-            'ip_cfg_vlan'     => 'ipCurCfgIntfVlan',
-         );
-         
-%MUNGE = (
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            'at_paddr' => \&SNMP::Info::munge_mac,
-         );
+    %SNMP::Info::Layer3::FUNCS,
+
+    # From agPortCurCfgTable
+    'old_ag_p_cfg_idx'  => 'ALTEON_TS_PHYSICAL_MIB__agPortCurCfgIndx',
+    'new_ag_p_cfg_idx'  => 'ALTEON_CHEETAH_SWITCH_MIB__agPortCurCfgIndx',
+    'old_ag_p_cfg_pref' => 'agPortCurCfgPrefLink',
+    'new_ag_p_cfg_pref' => 'agPortCurCfgPreferred',
+    'old_ag_p_cfg_pvid' => 'ALTEON_TS_PHYSICAL_MIB__agPortCurCfgPVID',
+    'new_ag_p_cfg_pvid' => 'ALTEON_CHEETAH_SWITCH_MIB__agPortCurCfgPVID',
+    'old_ag_p_cfg_fe_auto' =>
+        'ALTEON_TS_PHYSICAL_MIB__agPortCurCfgFastEthAutoNeg',
+    'new_ag_p_cfg_fe_auto' =>
+        'ALTEON_CHEETAH_SWITCH_MIB__agPortCurCfgFastEthAutoNeg',
+    'old_ag_p_cfg_fe_mode' =>
+        'ALTEON_TS_PHYSICAL_MIB__agPortCurCfgFastEthMode',
+    'new_ag_p_cfg_fe_mode' =>
+        'ALTEON_CHEETAH_SWITCH_MIB__agPortCurCfgFastEthMode',
+    'old_ag_p_cfg_ge_auto' =>
+        'ALTEON_TS_PHYSICAL_MIB__agPortCurCfgGigEthAutoNeg',
+    'new_ag_p_cfg_ge_auto' =>
+        'ALTEON_CHEETAH_SWITCH_MIB__agPortCurCfgGigEthAutoNeg',
+    'old_ag_p_cfg_name' => 'ALTEON_TS_PHYSICAL_MIB__agPortCurCfgPortName',
+    'new_ag_p_cfg_name' => 'ALTEON_CHEETAH_SWITCH_MIB__agPortCurCfgPortName',
+
+    # From portInfoTable
+    'old_p_info_idx'  => 'ALTEON_TS_PHYSICAL_MIB__portInfoIndx',
+    'new_p_info_idx'  => 'ALTEON_CHEETAH_SWITCH_MIB__portInfoIndx',
+    'old_p_info_mode' => 'ALTEON_TS_PHYSICAL_MIB__portInfoMode',
+    'new_p_info_mode' => 'ALTEON_CHEETAH_SWITCH_MIB__portInfoMode',
+
+    # From ipCurCfgIntfTable
+    'old_ip_cfg_vlan' => 'ALTEON_TS_NETWORK_MIB__ipCurCfgIntfVlan',
+    'new_ip_cfg_vlan' => 'ALTEON_CHEETAH_NETWORK_MIB__ipCurCfgIntfVlan',
+
+    # From vlanCurCfgTable
+    'old_vlan_id'    => 'ALTEON_TS_PHYSICAL_MIB__vlanCurCfgVlanId',
+    'new_vlan_id'    => 'ALTEON_CS_PHYSICAL_MIB__vlanCurCfgVlanId',
+    'old_vlan_state' => 'ALTEON_TS_PHYSICAL_MIB__vlanCurCfgState',
+    'new_vlan_state' => 'ALTEON_CS_PHYSICAL_MIB__vlanCurCfgState',
+    'old_vlan_name'  => 'ALTEON_TS_PHYSICAL_MIB__vlanCurCfgVlanName',
+    'new_vlan_name'  => 'ALTEON_CS_PHYSICAL_MIB__vlanCurCfgVlanName',
+    'old_vlan_ports' => 'ALTEON_TS_PHYSICAL_MIB__vlanCurCfgPorts',
+    'new_vlan_ports' => 'ALTEON_CS_PHYSICAL_MIB__vlanCurCfgPorts',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
 
 sub model {
     my $alteon = shift;
-    my $desc = $alteon->description();
-    return undef unless defined $desc;
 
-    return 'AD2' if ($desc =~ /AD2/);
-    return 'AD3' if ($desc =~ /AD3/);
-    return 'AD4' if ($desc =~ /AD4/);
-    return '180' if ($desc =~ /180/);
-    return '183' if ($desc =~ /183/);
-    return '184' if ($desc =~ /184/);
-    
-    return $desc;
+    my $id = $alteon->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::AlteonAD::model() - Device does not support sysObjectID\n"
+            if $alteon->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^(aceswitch|aws|ods)//;
+    $model =~ s/^acedirector/AD/;
+    $model =~ s/^(copper|fiber)Module/BladeCenter GbESM/;
+
+    return $model;
 }
 
 sub vendor {
-    return 'nortel';
+    return 'radware';
 }
 
 sub os {
-    return 'webos';
+    return 'alteon';
 }
 
 sub os_ver {
     my $alteon = shift;
-    my $version = $alteon->sw_ver();
-    return undef unless defined $version;
+    my $version = $alteon->new_sw_ver() || $alteon->old_sw_ver();
+    return unless defined $version;
 
     return $version;
 }
 
-sub interfaces {
+sub ps1_status {
     my $alteon = shift;
-    my $interfaces = $alteon->i_index();
+    my $old_ps = $alteon->old_ps1_stat();
+    my $new_ps = $alteon->new_ps_stat();
+    
+    return $old_ps if $old_ps;
+    
+    if ($new_ps) {
+        return 'ok' if ($new_ps eq 'singlePowerSupplyOk');
+        return 'failed' if ($new_ps eq 'firstPowerSupplyFailed');
+    }
+    
+    return;
+}
+
+sub ps2_status {
+    my $alteon = shift;
+    my $old_ps = $alteon->old_ps2_stat();
+    my $new_ps = $alteon->new_ps_stat();
+    
+    return $old_ps if $old_ps;
+    
+    if ($new_ps) {
+        return 'ok' if ($new_ps eq 'doublePowerSupplyOk');
+        return 'failed' if ($new_ps eq 'secondPowerSupplyFailed');
+    }
+
+    return;
+}
+
+sub interfaces {
+    my $alteon       = shift;
+    my $interfaces   = $alteon->i_index();
     my $descriptions = $alteon->i_description();
+    my $ip_max       = $alteon->new_ip_max() || $alteon->old_ip_max();
 
     my %interfaces = ();
-    foreach my $iid (keys %$interfaces){
+    foreach my $iid ( keys %$interfaces ) {
         my $desc = $descriptions->{$iid};
         next unless defined $desc;
 
-	if ($desc =~ /(^net\d+)/) {
-	    $desc  = $1;
-	}
-	elsif (($iid > 256) and ($iid < 266)) {
-	    $desc = ($iid % 256);
-	}
+        if ( $desc =~ /(^net\d+)/ ) {
+            $desc = $1;
+        }
+
+        # IP interfaces are first followed by physical, number possible
+        # varies by switch model
+        elsif ( defined $ip_max and $iid > $ip_max ) {
+            $desc = ( $iid % $ip_max );
+            $desc = 'mgmt' if $desc == 231;
+        }
         $interfaces{$iid} = $desc;
     }
     return \%interfaces;
@@ -150,20 +217,24 @@ sub interfaces {
 
 sub i_duplex {
     my $alteon = shift;
-    
-    my $p_mode = $alteon->p_info_mode();
-    
+
+    my $p_mode = $alteon->new_p_info_mode()
+        || $alteon->old_p_info_mode()
+        || {};
+    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
+
     my %i_duplex;
-    foreach my $if (keys %$p_mode){
+    foreach my $if ( keys %$p_mode ) {
         my $duplex = $p_mode->{$if};
-        next unless defined $duplex; 
-    
+        next unless defined $duplex;
+
         $duplex = 'half' if $duplex =~ /half/i;
         $duplex = 'full' if $duplex =~ /full/i;
-	
-	my $idx = $if + 256;
-	
-        $i_duplex{$idx}=$duplex; 
+
+        my $idx;
+        $idx = $if + $ip_max if ( defined $ip_max );
+
+        $i_duplex{$idx} = $duplex;
     }
     return \%i_duplex;
 }
@@ -171,116 +242,179 @@ sub i_duplex {
 sub i_duplex_admin {
     my $alteon = shift;
 
-    my $ag_pref = $alteon->ag_p_cfg_pref();
-    my $ag_fe_auto = $alteon->ag_p_cfg_fe_auto();
-    my $ag_fe_mode = $alteon->ag_p_cfg_fe_mode();
-    my $ag_ge_auto = $alteon->ag_p_cfg_ge_auto();
- 
+    my $ag_pref 
+        = $alteon->new_ag_p_cfg_pref()
+        || $alteon->old_ag_p_cfg_pref()
+        || {};
+    my $ag_fe_auto 
+        = $alteon->new_ag_p_cfg_fe_auto()
+        || $alteon->old_ag_p_cfg_fe_auto()
+        || {};
+    my $ag_fe_mode 
+        = $alteon->new_ag_p_cfg_fe_mode()
+        || $alteon->old_ag_p_cfg_fe_mode()
+        || {};
+    my $ag_ge_auto 
+        = $alteon->new_ag_p_cfg_ge_auto()
+        || $alteon->old_ag_p_cfg_ge_auto()
+        || {};
+    my $ip_max  = $alteon->new_ip_max() || $alteon->old_ip_max();
+    my $i_speed = $alteon->i_speed()    || {};
+
     my %i_duplex_admin;
-    foreach my $if (keys %$ag_pref){
-        my $pref = $ag_pref->{$if};
-        next unless defined $pref;
-	
-	my $string = 'other';	
-	if ($pref =~ /gigabit/i) {
-	    my $ge_auto = $ag_ge_auto->{$if};
-	    $string = 'full' if ($ge_auto =~ /off/i);
-	    $string = 'auto' if ($ge_auto =~ /on/i);
-	}
-	elsif ($pref =~ /fast/i) {
-	    my $fe_auto = $ag_fe_auto->{$if};
-	    my $fe_mode = $ag_fe_mode->{$if};
-	    $string = 'half' if ($fe_mode =~ /half/i and $fe_auto =~ /off/i);
-            $string = 'full' if ($fe_mode =~ /full/i and $fe_auto =~ /off/i);
-            $string = 'auto' if $fe_auto =~ /on/i;
-	}
-	my $idx = $if + 256;
-	
-        $i_duplex_admin{$idx}=$string; 
+    foreach my $if ( keys %$ag_ge_auto ) {
+        my $pref    = $ag_pref->{$if}    || '';
+        my $speed   = $i_speed->{$if}    || '';
+        my $ge_auto = $ag_ge_auto->{$if} || '';
+        my $fe_auto = $ag_fe_auto->{$if} || '';
+        my $fe_mode = $ag_fe_mode->{$if} || '';
+
+        # Default to auto
+        my $string = 'auto';
+
+        if ( $ge_auto =~ /off/i
+            && ( $pref =~ /gigabit/i || $speed eq '1.0 Gbps' ) )
+        {
+            $string = 'full';
+        }
+        if ( $fe_auto =~ /off/i
+            && ( $pref =~ /fast/i || $speed =~ /100?\sMbps/ ) )
+        {
+            $string = 'half'
+                if ( $fe_mode =~ /half/i );
+            $string = 'full'
+                if ( $fe_mode =~ /full/i );
+        }
+
+        my $idx;
+        $idx = $if + $ip_max if ( defined $ip_max );
+
+        $i_duplex_admin{$idx} = $string;
     }
     return \%i_duplex_admin;
 }
 
-sub i_vlan {
-    my $alteon = shift;
-
-    my $ag_vlans  = $alteon->ag_p_cfg_pvid();
-    my $ip_vlans  = $alteon->ip_cfg_vlan();
-
-
-    my %i_vlan;
-    foreach my $if (keys %$ip_vlans){
-        my $ip_vlanid = $ip_vlans->{$if};
-	next unless defined $ip_vlanid;
-        
-        $i_vlan{$if}=$ip_vlanid; 
-    }
-    foreach my $if (keys %$ag_vlans){
-        my $ag_vlanid = $ag_vlans->{$if};
-	next unless defined $ag_vlanid;
-        
-	my $idx = $if + 256;   
-        $i_vlan{$idx}=$ag_vlanid; 
-    }
-    return \%i_vlan;
-}
-
 sub i_name {
     my $alteon = shift;
-    my $p_name = $alteon->ag_p_cfg_name();
+
+    my $p_name = $alteon->new_ag_p_cfg_name()
+        || $alteon->old_ag_p_cfg_name()
+        || {};
+    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
 
     my %i_name;
-    foreach my $iid (keys %$p_name){
+    foreach my $iid ( keys %$p_name ) {
         my $name = $p_name->{$iid};
-	next unless defined $name;
-        my $idx = $iid + 256;
+        next unless defined $name;
+        my $idx;
+        $idx = $iid + $ip_max if ( defined $ip_max );
         $i_name{$idx} = $name;
     }
     return \%i_name;
 }
 
-# Bridge MIB does not map Bridge Port to ifIndex correctly
+sub v_index {
+    my $alteon  = shift;
+    my $partial = shift;
+
+    return $alteon->new_vlan_id($partial) || $alteon->old_vlan_id($partial);
+}
+
+sub v_name {
+    my $alteon  = shift;
+    my $partial = shift;
+
+    return $alteon->new_vlan_name($partial)
+        || $alteon->old_vlan_name($partial);
+}
+
+sub i_vlan {
+    my $alteon = shift;
+
+    my $ag_vlans = $alteon->new_ag_p_cfg_pvid()
+        || $alteon->old_ag_p_cfg_pvid()
+        || {};
+    my $ip_vlans = $alteon->new_ip_cfg_vlan()
+        || $alteon->old_ip_cfg_vlan()
+        || {};
+    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
+
+    my %i_vlan;
+    foreach my $if ( keys %$ip_vlans ) {
+        my $ip_vlanid = $ip_vlans->{$if};
+        next unless defined $ip_vlanid;
+
+        $i_vlan{$if} = $ip_vlanid;
+    }
+    foreach my $if ( keys %$ag_vlans ) {
+        my $ag_vlanid = $ag_vlans->{$if};
+        next unless defined $ag_vlanid;
+
+        my $idx;
+        $idx = $if + $ip_max if ( defined $ip_max );
+        $i_vlan{$idx} = $ag_vlanid;
+    }
+    return \%i_vlan;
+}
+
+sub i_vlan_membership {
+    my $alteon = shift;
+
+    my $v_ports = $alteon->old_vlan_ports()
+        || $alteon->new_vlan_ports()
+        || {};
+    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
+
+    my $i_vlan_membership = {};
+    foreach my $vlan ( keys %$v_ports ) {
+        my $portlist = [ split( //, unpack( "B*", $v_ports->{$vlan} ) ) ];
+        my $ret = [];
+
+        # Convert portlist bit array to ifIndex array
+        for ( my $i = 0; $i <= scalar(@$portlist); $i++ ) {
+            my $idx;
+            $idx = $i + $ip_max if ( defined $ip_max );
+            push( @{$ret}, $idx ) if ( @$portlist[$i] );
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            push( @{ $i_vlan_membership->{$port} }, $vlan );
+        }
+    }
+    return $i_vlan_membership;
+}
+
+# Bridge MIB does not map Bridge Port to ifIndex correctly on some code
+# versions
 sub bp_index {
     my $alteon = shift;
-    my $b_index = $alteon->bp_index_2();
+
+    my $b_index = $alteon->orig_bp_index();
+    my $ip_max = $alteon->new_ip_max() || $alteon->old_ip_max();
 
     my %bp_index;
-    foreach my $iid (keys %$b_index){
+    foreach my $iid ( keys %$b_index ) {
         my $port = $b_index->{$iid};
         next unless defined $port;
-        $port = $port + 256;
+        $port = $port + $ip_max if ( defined $ip_max and $iid == $ip_max );
 
-	$bp_index{$iid} = $port;
+        $bp_index{$iid} = $port;
     }
     return \%bp_index;
 }
 
-sub root_ip {
-    my $alteon = shift;
-    my $ip_table = $alteon->ip_table();
-
-# Return First IP Address    
-    foreach my $entry (keys %$ip_table){
-        my $router_ip = $ip_table->{$entry};
-        print " SNMP::Layer3::AlteonAD::root_ip() using $router_ip\n" if $DEBUG;
-        next unless $router_ip;
-        return $router_ip if ($router_ip ne '0.0.0.0');
-    }
-    return undef;
-}
-
-
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::AlteonAD - Perl5 Interface to Nortel Networks' Alteon Ace
-Director Series Layer 2-7 Switches.
+SNMP::Info::Layer3::AlteonAD - SNMP Interface to Radware Alteon ADC
+Switches.
 
 =head1 AUTHOR
 
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -288,7 +422,6 @@ Eric Miller (C<eric@jeneric.org>)
  my $alteon = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
@@ -300,11 +433,11 @@ Eric Miller (C<eric@jeneric.org>)
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Layer 2-7 load balancing switches running Nortel Networks'
-Alteon Web OS Traffic Control Software.
+Abstraction subclass for Radware Alteon Series ADC switches and
+Nortel BladeCenter Layer2-3 GbE Switch Modules.
 
-For speed or debugging purposes you can call the subclass directly, but not after
-determining a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $alteon = new SNMP::Info::Layer3::AlteonAD(...);
 
@@ -312,9 +445,7 @@ determining a more specific class using the method above.
 
 =over
 
-=item SNMP::Info
-
-=item SNMP::Info::Bridge
+=item SNMP::Info::Layer3
 
 =back
 
@@ -322,25 +453,23 @@ determining a more specific class using the method above.
 
 =over
 
-=item ALTEON-TIGON-SWITCH-MIB
+=item F<ALTEON-ROOT-MIB>
 
-=item ALTEON-TS-PHYSICAL-MIB
+=item F<ALTEON-TIGON-SWITCH-MIB>
 
-=item ALTEON-TS-NETWORK-MIB
+=item F<ALTEON-TS-PHYSICAL-MIB>
 
-MIBs can be found on the CD that came with your product.
+=item F<ALTEON-TS-NETWORK-MIB>
 
-Or, they can be downloaded directly from Nortel Networks regardless of support
-contract status.  Go to http://www.nortelnetworks.com Techninal Support,
-Browse Technical Support, Select by Product Families, Alteon,
-Alteon Web OS Traffic Control Software, Software.  Filter on mibs and download
-the latest version's archive.
+=item F<ALTEON-CS-PHYSICAL-MIB>
+
+=item F<ALTEON-CHEETAH-SWITCH-MIB>
+
+=item F<ALTEON-CHEETAH-NETWORK-MIB>
 
 =item Inherited Classes' MIBs
 
-See SNMP::Info for its own MIB requirements.
-
-See SNMP::Info::Bridge for its own MIB requirements.
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -352,55 +481,60 @@ These are methods that return scalar value from SNMP
 
 =item $alteon->model()
 
-Returns the model extracted from B<sysDescr>
+Returns model type.  Checks $alteon->id() against the F<ALTEON-ROOT-MIB> and
+then parses out C<aceswitch>, C<aws>, and C<ods> replaces C<acedirector>
+with AD, and replaces copperModule/fiberModule with BladeCenter GbESM.
 
 =item $alteon->vendor()
 
-Returns 'Nortel'
+Returns 'radware'
 
 =item $alteon->os()
 
-Returns 'WebOS'
+Returns 'alteon'
 
 =item $alteon->os_ver()
 
-Returns the software version reported by B<agSoftwareVersion>
-
-=item $alteon->root_ip()
-
-Returns the primary IP used to communicate with the device.  Currently returns
-the first interfaces IP.
+Returns the software version reported by C<agSoftwareVersion>
 
 =item $alteon->tftp_action()
 
-(B<agTftpAction>)
+(C<agTftpAction>)
 
 =item $alteon->tftp_host()
 
-(B<agTftpServer>)
+(C<agTftpServer>)
 
 =item $alteon->tftp_file()
 
-(B<agTftpCfgFileName>)
+(C<agTftpCfgFileName>)
 
 =item $alteon->tftp_result()
 
-(B<agTftpLastActionStatus>)
+(C<agTftpLastActionStatus>)
+
+=item $alteon->fan()
+
+(C<hwFanStatus>)
+
+=item $alteon->ps1_status()
+
+Returns status of primary power supply
+
+=item $alteon->ps2_status()
+
+Returns status of redundant power supply
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Globals imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Bridge
+=head1 TABLE METHODS
 
-See documentation in SNMP::Info::Bridge for details.
-
-=head1 TABLE ENTRIES
-
-These are methods that return tables of information in the form of a reference
-to a hash.
+These are methods that return tables of information in the form of a
+reference to a hash.
 
 =head2 Overrides
 
@@ -411,7 +545,7 @@ to a hash.
 Returns reference to the map between IID and physical port.
 
 Utilizes description for network interfaces.  Ports are determined by
-formula (ifIndex mod 256).
+formula (C<ifIndex mod 256>).
 
 =item $alteon->i_duplex()
 
@@ -423,48 +557,44 @@ Returns reference to hash.  Maps port admin duplexes to IIDs.
 
 =item $alteon->i_vlan()
 
-Returns reference to hash.  Maps port VLAN ID to IIDs.
+Returns a mapping between C<ifIndex> and the PVID or default VLAN.
+
+=item $alteon->i_vlan_membership()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the egress list for the port.
+
+  Example:
+  my $interfaces = $alteon->interfaces();
+  my $vlans      = $alteon->i_vlan_membership();
+  
+  foreach my $iid (sort keys %$interfaces) {
+    my $port = $interfaces->{$iid};
+    my $vlan = join(',', sort(@{$vlans->{$iid}}));
+    print "Port: $port VLAN: $vlan\n";
+  }
+
+=item $alteon->v_index()
+
+Returns VLAN IDs
+
+=item $alteon->v_name()
+
+Human-entered name for vlans.
 
 =item $alteon->i_name()
 
-Maps (B<agPortCurCfgPortName>) to port and returns the human set port name if exists.
+Maps (C<agPortCurCfgPortName>) to port and returns the human set port name if
+exists.
 
 =item $alteon->bp_index()
 
-Returns a mapping between ifIndex and the Bridge Table.
+Returns a mapping between C<ifIndex> and the Bridge Table.
 
 =back
 
-=head2 RFC1213 Arp Cache Table (B<ipNetToMediaTable>)
+=head2 Table Methods imported from SNMP::Info::Layer3
 
-=over
-
-=item $alteon->at_index()
-
-Returns reference to hash.  Maps ARP table entries to Interface IIDs 
-
-(B<ipNetToMediaIfIndex>)
-
-=item $alteon->at_paddr()
-
-Returns reference to hash.  Maps ARP table entries to MAC addresses. 
-
-(B<ipNetToMediaPhysAddress>)
-
-=item $alteon->at_netaddr()
-
-Returns reference to hash.  Maps ARP table entries to IPs 
-
-(B<ipNetToMediaNetAddress>)
-
-=back
-
-=head2 Table Methods imported from SNMP::Info
-
-See documentation in SNMP::Info for details.
-
-=head2 Table Methods imported from SNMP::Info::Bridge
-
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/Altiga.pm

@@ -0,0 +1,392 @@
+# SNMP::Info::Layer3::Altiga
+# $Id$
+#
+# Copyright (c) 2008 Jeroen van Ingen Schenau
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without 
+# modification, are permitted provided that the following conditions are met:
+# 
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the 
+#       names of its contributors may be used to endorse or promote products 
+#       derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Altiga;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Altiga::ISA = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Altiga::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE 
+            $int_include_vpn $fake_idx $type_class/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+            %SNMP::Info::Layer3::MIBS,
+            'ALTIGA-VERSION-STATS-MIB'  => 'alVersionString',
+            'ALTIGA-SESSION-STATS-MIB'  => 'alActiveSessionCount',
+            'ALTIGA-HARDWARE-STATS-MIB' => 'alHardwarePs1Type',  
+    );
+
+%GLOBALS = (
+            %SNMP::Info::Layer3::GLOBALS,
+            # From ALTIGA-VERSION-STATS-MIB
+            'os_ver'          => 'alVersionString',
+            # From ALTIGA-SESSION-STATS-MIB
+            'vpn_act_sess'    => 'alActiveSessionCount',
+            'vpn_total_sess'  => 'alTotalSessionCount',
+            'vpn_max_sess'    => 'alMaxSessionCount',
+            'vpn_l2l_sess'    => 'alActiveLanToLanSessionCount',
+            'vpn_mgmt_sess'   => 'alActiveManagementSessionCount',
+            'vpn_ras_sess'    => 'alActiveRemoteAccessSessionCount',
+            # From ALTIGA-HARDWARE-STATS-MIB
+            'ps1_type'        => 'alHardwarePs1Type',
+            'ps1_3v_alarm'    => 'alHardwarePs1Voltage3vAlarm',
+            'ps1_5v_alarm'    => 'alHardwarePs1Voltage5vAlarm',
+            'ps2_type'        => 'alHardwarePs2Type',
+            'ps2_3v_alarm'    => 'alHardwarePs2Voltage3vAlarm',
+            'ps2_5v_alarm'    => 'alHardwarePs2Voltage5vAlarm',
+            'fan1_alarm'      => 'alHardwareFan1RpmAlarm',
+            'fan2_alarm'      => 'alHardwareFan2RpmAlarm',
+            'fan3_alarm'      => 'alHardwareFan3RpmAlarm',
+            
+       );
+
+%FUNCS = (
+            %SNMP::Info::Layer3::FUNCS,
+            'i_type2'           => 'ifType',
+            'i_lastchange2'     => 'ifLastChange',
+            'vpn_sess_status'   => 'alActiveSessionRowStatus',
+            'vpn_sess_user'     => 'alActiveSessionUserName',
+            'vpn_sess_peer_ip'  => 'alActiveSessionIpAddress',
+            'vpn_sess_protocol' => 'alActiveSessionProtocol',
+            'vpn_sess_encr'     => 'alActiveSessionEncrType',
+            'vpn_sess_start'    => 'alActiveSessionStartTime',
+            'vpn_sess_conntime' => 'alActiveSessionConnectTime',
+            'vpn_sess_out_oct'  => 'alActiveSessionOctetsSent',
+            'vpn_sess_in_oct'   => 'alActiveSessionOctetsRcvd',
+            'vpn_sess_group'    => 'alActiveSessionGroupName',
+            'vpn_sess_gid'      => 'alActiveSessionGroupId',
+            'vpn_sess_rem_ip'   => 'alActiveSessionPublicIpAddress',
+     );
+
+%MUNGE = (
+            %SNMP::Info::Layer3::MUNGE,
+            'ps1_3v_alarm'    => \&munge_alarm,
+            'ps1_5v_alarm'    =>  \&munge_alarm,
+            'ps2_3v_alarm'    =>  \&munge_alarm,
+            'ps2_5v_alarm'    =>  \&munge_alarm,
+            'fan1_alarm'      =>  \&munge_alarm,
+            'fan2_alarm'      =>  \&munge_alarm,
+            'fan3_alarm'      =>  \&munge_alarm,
+
+     );
+
+# Variable to modify behaviour of "interfaces" subroutine.
+# * When set to 0, "interfaces" returns only fixed interfaces from the IF-MIB,
+# * When set to 1, "interfaces" returns fixed interfaces from IF-MIB and LAN-to-LAN tunnels from ALTIGA-SESSION-MIB
+# TODO: This should be an instance method, not a class global
+$int_include_vpn = 1;
+
+# Variable to prepended to each tunnel index when tunnel is added to %interfaces, to avoid overwriting "real" ifIndex entries
+$fake_idx = 3076;
+
+# Variable to classify session types into categories: 0 - unclassified, 1 - LAN-to-LAN or fixed, 2 - RAS or dynamic, 3 - administrative
+$type_class = {
+    'pptp'                  => 2,
+    'l2tp'                  => 2,
+    'ipsec'                 => 2,
+    'http'                  => 3,
+    'ftp'                   => 3,
+    'telnet'                => 3,
+    'snmp'                  => 3,
+    'tftp'                  => 3,
+    'console'               => 3,
+    'debugTelnet'           => 3,
+    'debugConsole'          => 3,
+    'other'                 => 3,
+    'ike'                   => 0,
+    'l2tpOverIpSec'         => 2,
+    'ipsecLanToLan'         => 1,
+    'ipsecOverUdp'          => 2,
+    'ssh'                   => 3,
+    'vcaLanToLan'           => 1,
+    'ipsecOverTcp'          => 2,
+    'pppoe'                 => 2,
+    'ipsecOverNatT'         => 2,
+    'ipsecLan2LanOverNatT'  => 1,
+    'l2tpOverIpsecOverNatT' => 2,
+    'userHttps'             => 2,
+    'pop3s'                 => 2,
+    'imap4s'                => 2,
+    'smtps'                 => 2,
+    'httpsTunnel'           => 2,
+};
+
+sub vendor {
+    return 'altiga';
+}
+
+sub os {
+    return 'altiga';
+}
+
+# $altiga->interfaces() - Map the Interfaces to their physical names
+# Add interface number to interface name to prevent duplicate ifDescr
+# Included statically configured VPN tunnels if ($int_include_vpn)
+sub interfaces {
+    my $altiga = shift;
+    my $partial = shift;
+
+    my $interfaces = $altiga->i_index($partial);
+    my $descriptions = $altiga->i_description($partial);
+
+    my %int_rev = ();
+    my %interfaces = ();
+    foreach my $iid (sort {$a cmp $b} keys %$interfaces) {
+        my $desc = $descriptions->{$iid};
+        next unless defined $desc;
+        if (!exists $int_rev{$desc}) {
+            $interfaces{$iid} = $desc;
+            $int_rev{$desc} = $iid;
+        } else {
+            my $done = 0;
+            my $unique_desc;
+            my $cnt = 1;
+            until ($done) {
+                $cnt++;
+                $unique_desc = sprintf("%s (%d)", $desc, $cnt);
+                if (!exists $int_rev{$unique_desc}) {
+                    $done++;
+                }
+            }
+            $int_rev{$unique_desc} = $iid;
+            $interfaces{$iid} = $unique_desc;
+            $interfaces{ $int_rev{$desc} } = sprintf("%s (%d)", $desc, 1);
+        }
+    }
+    if ($int_include_vpn) {
+        my $tun_type = $altiga->vpn_sess_protocol();
+        my $peer = $altiga->vpn_sess_peer_ip();
+        my $remote = $altiga->vpn_sess_rem_ip(); 
+        my $group = $altiga->vpn_sess_gid();
+        foreach my $tunnel (keys %$tun_type) {
+            if ($type_class->{$tun_type->{$tunnel}} eq 1) {
+                $interfaces{"$fake_idx.$tunnel"} = sprintf("%s VPN to %s", uc($tun_type->{$tunnel}), $remote->{$tunnel});
+            }
+        }
+    }
+            
+    return \%interfaces;
+}
+
+sub i_type {
+    my $altiga = shift;
+    my $partial = shift;
+    my $types = $altiga->i_type2();
+    if ($int_include_vpn) {
+        my $tun_type = $altiga->vpn_sess_protocol();
+        foreach my $tunnel (keys %$tun_type) {
+            $types->{"$fake_idx.$tunnel"} = $tun_type->{$tunnel};
+        }
+    }
+    return $types;
+}
+
+sub i_lastchange {
+    my $altiga = shift;
+    my $partial = shift;
+
+    # TODO: This is what munges are for.
+    my $lastchange = $altiga->i_lastchange2();
+    if ($int_include_vpn) {
+        my $tun_start = $altiga->vpn_sess_start();
+        foreach my $tunnel (keys %$tun_start) {
+            $lastchange->{"$fake_idx.$tunnel"} = $tun_start->{$tunnel};
+        }
+    }
+    return $lastchange;
+}
+
+sub ps1_status {
+    my $altiga = shift;
+    my $alarm_3v = $altiga->ps1_3v_alarm() || "";
+    my $alarm_5v = $altiga->ps1_5v_alarm() || "";
+    return sprintf("3V: %s, 5V: %s", $alarm_3v, $alarm_5v);
+}
+
+sub ps2_status {
+    my $altiga = shift;
+    my $alarm_3v = $altiga->ps2_3v_alarm() || "";
+    my $alarm_5v = $altiga->ps2_5v_alarm() || "";
+    return sprintf("3V: %s, 5V: %s", $alarm_3v, $alarm_5v);
+}
+
+sub fan {
+    my $altiga = shift;
+    my $alarm_fan1 = $altiga->fan1_alarm() || "";
+    my $alarm_fan2 = $altiga->fan2_alarm() || "";
+    my $alarm_fan3 = $altiga->fan3_alarm() || "";
+    return sprintf("Fan 1: %s, Fan 2: %s, Fan 3: %s", $alarm_fan1, $alarm_fan2, $alarm_fan3);
+}
+
+sub munge_alarm {
+    my $alarm = shift;
+    if ($alarm eq 'false') {
+        return 'OK';
+    } elsif ($alarm eq 'true') {
+        return 'FAIL';
+    } else {
+        return "(n/a)";
+    }
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Altiga - SNMP Interface to Cisco (formerly Altiga) VPN concentrators
+
+=head1 AUTHOR
+
+Jeroen van Ingen Schenau
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $altiga = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'my_vpn_host',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $altiga->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Cisco (formerly Altiga) VPN concentrators
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 Class Variables (options)
+
+=over
+
+=item $SNMP::Info::Layer3::Altiga::int_include_vpn
+
+Variable to modify behavior of "interfaces" subroutine.
+
+  * When set to 0, "interfaces" returns only fixed interfaces from the IF-MIB,
+  * When set to 1, "interfaces" returns fixed interfaces from IF-MIB and
+    LAN-to-LAN tunnels from ALTIGA-SESSION-MIB (default)
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $altiga->vendor()
+
+Returns 'altiga'
+
+=item $altiga->os()
+
+Returns 'altiga'
+
+=item $altiga->os_ver()
+
+Tries to determine OS version from the C<sysDescr.0> field. Returns version or C<sysDescr.0>
+
+=item $altiga->fan()
+
+Combines results from C<fan1_alarm>, C<fan2_alarm>, and C<fam3_alarm> methods.
+
+=item $altiga->ps1_status()
+
+Combines C<ps1_3v_alarm> and C<ps1_5v_alarm> methods.
+
+=item $altiga->ps2_status()
+
+Combines C<ps2_3v_alarm> and C<ps2_5v_alarm> methods.
+
+=back
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $altiga->interfaces()
+
+This method overrides the interfaces() method inherited from SNMP::Info.
+It provides a mapping between the Interface Table Index (iid) and the physical 
+port name, adding a port number to the port name to prevent duplicate names.
+
+=item $altiga->i_lastchange()
+
+Filters out the results depending on the value of $SNMP::Info::Layer3::Altiga::int_include_vpn
+
+=item $altiga->i_type()
+
+Filters out the results depending on the value of $SNMP::Info::Layer3::Altiga::int_include_vpn
+
+=back
+
+=head1 MUNGES
+
+=over
+
+=item munge_alarm()
+
+Changes C<true> and C<false> to C<FAIL>, C<OK>, and C<(n/a)>.
+
+=back
+
+=cut

Info/Layer3/Arista.pm

@@ -0,0 +1,257 @@
+# SNMP::Info::Layer3::Arista
+# $Id$
+#
+# Copyright (c) 2008 Arista Networks, Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of Arista Networks, Inc. nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Arista;
+
+use strict;
+use Exporter;
+
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Arista::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Arista::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'ARISTA-PRODUCTS-MIB' => 'aristaProducts',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::Arista::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::Arista::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub vendor {
+    return 'arista';
+}
+
+sub os {
+    return 'EOS';
+}
+
+sub os_ver {
+    my $arista = shift;
+    my $descr   = $arista->description();
+    my $os_ver  = undef;
+
+    $os_ver = $1 if ( $descr =~ /\s+EOS\s+version\s+(\S+)\s+/ );
+    return $os_ver;
+}
+
+sub model {
+    my $arista = shift;
+    my $id     = $arista->id();
+
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    $model =~ s/^arista//;
+    return $model;
+}
+
+# Use Q-BRIDGE-MIB
+
+sub fw_mac {
+    my $arista  = shift;
+    my $partial = shift;
+
+    return $arista->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $arista  = shift;
+    my $partial = shift;
+
+    return $arista->qb_fw_port($partial);
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Arista - SNMP Interface to Arista Networks EOS
+
+=head1 AUTHOR
+
+Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $arista = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $arista->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Arista Networks EOS-based devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::MAU
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<ARISTA-PRODUCTS-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $arista->vendor()
+
+    Returns 'Arista Networks, Inc.'
+
+=item $arista->model()
+
+Tries to reference $arista->id() to one of the product MIBs listed above
+
+Removes 'arista' from the name for readability.
+
+=item $arista->os()
+
+Returns 'EOS'
+
+=item $arista->os_ver()
+
+Grabs the os version from C<sysDescr>
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $arista->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $arista->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $arista->i_duplex_admin()
+
+Returns info from F<MAU-MIB>
+
+=item $arista->i_speed_admin()
+
+Returns info from F<MAU-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Aruba.pm

@@ -0,0 +1,658 @@
+# SNMP::Info::Layer3::Aruba
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Aruba;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Aruba::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Aruba::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'WLSX-SWITCH-MIB'         => 'wlsxHostname',
+    'WLSX-WLAN-MIB'           => 'wlanAPFQLN',
+    'WLSR-AP-MIB'             => 'wlsrHideSSID',
+    #'ALCATEL-IND1-TP-DEVICES' => 'familyOmniAccessWireless',
+);
+
+%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+
+    # WLSX-SWITCH-MIB::wlsxSwitchAccessPointTable
+    # Table index leafs do not return information
+    # therefore unable to use apBSSID.  We extract
+    # the information from the IID instead.
+    'aruba_ap_name'      => 'apLocation',
+    'aruba_ap_ip'        => 'apIpAddress',
+    'aruba_ap_essid'     => 'apESSID',
+    'aruba_ap_ssidbcast' => 'wlsrHideSSID',
+
+    # WLSX-WLAN-MIB::wlsxWlanAPTable
+    'aruba_perap_fqln'   => 'wlanAPFQLN',
+
+    # WLSR-AP-MIB::wlsrConfigTable
+    'aruba_ap_channel' => 'apCurrentChannel',
+
+    # WLSX-SWITCH-MIB::wlsxSwitchStationMgmtTable
+    # Table index leafs do not return information
+    # therefore unable to use staAccessPointBSSID
+    # or staPhyAddress.  We extract the information from
+    # the IID instead.
+    #'fw_port'             => 'staAccessPointBSSID',
+    #'fw_mac'              => 'staPhyAddress',
+    'fw_user' => 'staUserName',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub layers {
+    return '00000111';
+}
+
+sub os {
+    my $aruba = shift;
+    my %osmap = (
+        'alcatel-lucent' => 'aos-w',
+                );
+    return $osmap{$aruba->vendor()} || 'airos';
+}
+
+sub vendor {
+    my $aruba = shift;
+    my $id     = $aruba->id() || 'undef';
+    my %oidmap = (
+                  6486 => 'alcatel-lucent',
+                );
+    $id = $1 if (defined($id) && $id =~ /^\.1\.3\.6\.1\.4\.1\.(\d+)/);
+
+    if (defined($id) and exists($oidmap{$id})) {
+        return $oidmap{$id};
+    }
+    else {
+        return 'aruba';
+    }
+}
+
+sub os_ver {
+    my $aruba = shift;
+    my $descr = $aruba->description();
+    return unless defined $descr;
+
+    if ( $descr =~ m/Version\s+(\d+\.\d+\.\d+\.\d+)/ ) {
+        return $1;
+    }
+
+    return;
+}
+
+sub model {
+    my $aruba = shift;
+    my $id    = $aruba->id();
+    return unless defined $id;
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    return $model;
+}
+
+# Thin APs do not support ifMIB requirement
+#
+# We return all BSSIDs as pseudo-ports on the controller.
+
+sub i_index {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index  = $aruba->orig_i_index($partial)  || {};
+    my $ap_index = $aruba->aruba_ap_name($partial) || {};
+
+    my %if_index;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        $if_index{$iid} = $index;
+    }
+
+    # Get Attached APs as Interfaces
+    foreach my $ap_id ( keys %$ap_index ) {
+
+        # Convert the 0.254.123.456 index entry to a MAC address.
+        my $mac = join( ':',
+            map { sprintf( "%02x", $_ ) } split( /\./, $ap_id ) );
+
+        $if_index{$ap_id} = $mac;
+    }
+    return \%if_index;
+}
+
+sub interfaces {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index = $aruba->i_index($partial)       || {};
+    my $i_descr = $aruba->i_description($partial) || {};
+
+    my %if;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        if ( $index =~ /^\d+$/ ) {
+
+            # Replace the Index with the ifDescr field.
+            my $port = $i_descr->{$iid};
+            next unless defined $port;
+            $if{$iid} = $port;
+        }
+
+        elsif ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+            $if{$index} = $index;
+        }
+
+        else {
+            next;
+        }
+    }
+    return \%if;
+}
+
+# Most items are indexed by BSSID.
+# aruba_perap_fqln is indexed by AP, so we use the
+# [haven't decided yet] index to figure out all of the
+# BSSIDs served by a given radio.
+sub aruba_ap_fqln {
+    my $aruba  = shift;
+    # I don't think $partial is meaningful in this context
+
+    my $perap_fqln = $aruba->aruba_perap_fqln();
+    my $channel = $aruba->wlanAPBssidChannel();
+    my $aruba_ap_fqln = {};
+
+    # Channel index is: AP, radio, BSSID
+    foreach my $idx (keys %$channel) {
+	my @oid = split(/\./, $idx );
+	my $ap = join(".", @oid[0..5]);
+        my $bssid = join(".", @oid[7..12]);
+	$aruba_ap_fqln->{$bssid} = $perap_fqln->{$ap};
+    }
+
+    return $aruba_ap_fqln;
+}
+
+sub i_name {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index = $aruba->i_index($partial)       || {};
+    my $i_name2 = $aruba->orig_i_name($partial)   || {};
+    my $ap_name = $aruba->aruba_ap_name($partial) || {};
+    my $ap_fqln = $aruba->aruba_ap_fqln($partial) || {};
+
+    my %i_name;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        if ( $index =~ /^\d+$/ ) {
+            my $name = $i_name2->{$iid};
+            next unless defined $name;
+            $i_name{$index} = $name;
+        }
+
+        elsif ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+            my $name = $ap_fqln->{$iid} || $ap_name->{$iid};
+            next unless defined $name;
+            $i_name{$index} = $name;
+        }
+        else {
+            next;
+        }
+    }
+    return \%i_name;
+}
+
+sub i_ssidlist {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index = $aruba->i_index($partial)        || {};
+    my $ap_ssid = $aruba->aruba_ap_essid($partial) || {};
+
+    my %i_ssid;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        if ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+            my $ssid = $ap_ssid->{$iid};
+            next unless defined $ssid;
+            $i_ssid{$index} = $ssid;
+        }
+        else {
+            next;
+        }
+    }
+    return \%i_ssid;
+}
+
+sub i_80211channel {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index = $aruba->i_index($partial)          || {};
+    my $ap_ch   = $aruba->aruba_ap_channel($partial) || {};
+
+    my %i_ch;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        if ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+            my $ch = $ap_ch->{$iid};
+            next unless defined $ch;
+            $i_ch{$index} = $ch;
+        }
+        else {
+            next;
+        }
+    }
+    return \%i_ch;
+}
+
+sub i_ssidbcast {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index = $aruba->i_index($partial)            || {};
+    my $ap_bc   = $aruba->aruba_ap_ssidbcast($partial) || {};
+
+    my %i_bc;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        if ( $index =~ /(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}/ ) {
+            my $bc = $ap_bc->{$iid};
+            next unless defined $bc;
+            $bc = ( $bc ? 0 : 1 );
+            $i_bc{$index} = $bc;
+        }
+        else {
+            next;
+        }
+    }
+    return \%i_bc;
+}
+
+# Wireless switches do not support the standard Bridge MIB
+# Wired switches currently (AOS 7.2.0.0) do, but it seems only for
+# dot1q ports or access ports that are 'untrusted' ?
+sub bp_index {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $i_index  = $aruba->orig_i_index($partial)  || {};
+    my $ap_index = $aruba->aruba_ap_name($partial) || {};
+
+    # Collect standard bp_index first
+    my $wired_bp_index = $aruba->SUPER::bp_index($partial) || {};
+    my %bp_index = %$wired_bp_index;
+
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+        next if exists $bp_index{$iid}; # Only augment bp_index, don't overwrite any existing mappings 
+
+        $bp_index{$iid} = $index;
+    }
+
+    # Get Attached APs as Interfaces
+    foreach my $ap_id ( keys %$ap_index ) {
+
+        # Convert the 0.254.123.456 index entry to a MAC address.
+        my $mac = join( ':',
+            map { sprintf( "%02x", $_ ) } split( /\./, $ap_id ) );
+
+        $bp_index{$mac} = $mac;
+    }
+    return \%bp_index;
+}
+
+sub fw_port {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $fw_idx = $aruba->fw_user($partial) || {};
+
+    my $wired_fw_port = $aruba->SUPER::qb_fw_port($partial) || {};
+    my %fw_port = %$wired_fw_port;
+
+    foreach my $iid ( keys %$fw_idx ) {
+        if ( $iid
+            =~ /(\d+\.\d+\.\d+\.\d+\.\d+\.\d+).(\d+\.\d+\.\d+\.\d+\.\d+\.\d+)/
+            )
+        {
+            my $port = join( ':',
+                map { sprintf( "%02x", $_ ) } split( /\./, $2 ) );
+            $fw_port{$iid} = $port;
+        }
+        else {
+            next;
+        }
+    }
+    return \%fw_port;
+}
+
+sub fw_mac {
+    my $aruba   = shift;
+    my $partial = shift;
+
+    my $fw_idx = $aruba->fw_user($partial) || {};
+
+    my $wired_fw_mac = $aruba->SUPER::qb_fw_mac($partial) || {};
+    my %fw_mac = %$wired_fw_mac;
+
+    foreach my $iid ( keys %$fw_idx ) {
+        if ( $iid
+            =~ /(\d+\.\d+\.\d+\.\d+\.\d+\.\d+).(\d+\.\d+\.\d+\.\d+\.\d+\.\d+)/
+            )
+        {
+            my $mac = join( ':',
+                map { sprintf( "%02x", $_ ) } split( /\./, $1 ) );
+            $fw_mac{$iid} = $mac;
+        }
+        else {
+            next;
+        }
+    }
+    return \%fw_mac;
+}
+
+# Return the BSSID in i_mac.
+sub i_mac {
+    my $aruba = shift;
+    my $partial = shift;
+
+    # Start with the i_mac entries for the physical ports.
+    my $i_mac = $aruba->orig_i_mac($partial) || {};
+
+    # Add in all the BSSID entries.
+    my $i_index  = $aruba->i_index($partial) || {};
+    foreach my $iid (keys %$i_index) {
+        my $index = $i_index->{$iid};
+	if ($index =~ /:/) {
+	    $i_mac->{$index} = $index;
+	}
+    }
+
+    return $i_mac;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Aruba - SNMP Interface to Aruba wireless switches
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+    my $aruba = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $aruba->class();
+    print " Using device sub class : $class\n";
+
+=head1 DESCRIPTION
+
+SNMP::Info::Layer3::Aruba is a subclass of SNMP::Info that provides an
+interface to Aruba wireless switches.  The Aruba platform utilizes
+intelligent wireless switches which control thin access points.  The thin
+access points themselves are unable to be polled for end station information.
+
+This class emulates bridge functionality for the wireless switch. This enables
+end station MAC addresses collection and correlation to the thin access point
+the end station is using for communication.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $aruba = new SNMP::Info::Layer3::Aruba(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<WLSX-SWITCH-MIB>
+
+=item F<WLSR-AP-MIB>
+
+=back
+
+=head2 Inherited MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $aruba->model()
+
+Returns model type.  Cross references $aruba->id() with product IDs in the 
+Aruba MIB.
+
+=item $aruba->vendor()
+
+Returns 'aruba'
+
+=item $aruba->os()
+
+Returns 'airos'
+
+=item $aruba->os_ver()
+
+Returns the software version extracted from C<sysDescr>
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $aruba->layers()
+
+Returns 00000011.  Class emulates Layer 2 functionality for Thin APs through
+proprietary MIBs.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $aruba->i_index()
+
+Returns reference to map of IIDs to Interface index. 
+
+Extends C<ifIndex> to support thin APs as device interfaces.
+
+=item $aruba->interfaces()
+
+Returns reference to map of IIDs to ports.  Thin APs are implemented as device 
+interfaces.  The thin AP BSSID is used as the port identifier.
+
+=item $aruba->i_name()
+
+Interface name.  Returns (C<ifName>) for Ethernet interfaces and
+(C<wlanAPFQLN> or C<apLocation>) for thin AP interfaces.
+
+=item $aruba->i_mac()
+
+Interface MAC address.  Returns interface MAC address for Ethernet
+interfaces and BSSID for thin AP interfaces.
+
+=item $aruba->bp_index()
+
+Simulates bridge MIB by returning reference to a hash containing the index for
+both the keys and values.
+
+=item $aruba->fw_port()
+
+(C<staAccessPointBSSID>) as extracted from the IID.
+
+=item $aruba->fw_mac()
+
+(C<staPhyAddress>) as extracted from the IID.
+
+=item $aruba->i_ssidlist()
+
+Returns reference to hash.  SSID's recognized by the radio interface.
+
+(C<apESSID>)
+
+=item $aruba->i_ssidbcast()
+
+Returns reference to hash.  Indicates whether the SSID is broadcast, true or
+false.
+
+(C<wlsrHideSSID>)
+
+=item $aruba->i_80211channel()
+
+Returns reference to hash.  Current operating frequency channel of the radio
+interface.
+
+(C<apCurrentChannel>)
+
+=item $aruba->aruba_ap_fqln()
+
+Returns F<aruba_perap_fqln> indexed by BSSID instead of by AP.
+
+=back
+
+=head2 Aruba Switch AP Table  (C<wlsxSwitchAccessPointTable>)
+
+=over
+
+=item $aruba->aruba_ap_name()
+
+(C<apLocation>)
+
+=item $aruba->aruba_ap_ip()
+
+(C<apIpAddress>)
+
+=item $aruba->aruba_ap_essid()
+
+(C<apESSID>)
+
+=item $aruba->aruba_ap_ssidbcast()
+
+(C<wlsrHideSSID>)
+
+=back
+
+=head2 Aruba AP Table (C<wlsxWlanAPTable>)
+
+=over
+
+=item $aruba->aruba_perap_fqln()
+
+(C<wlanAPFQLN>)
+
+=back
+
+=head2 Aruba Switch Station Management Table (C<wlsxSwitchStationMgmtTable>)
+
+=over
+
+=item $aruba->fw_user()
+
+(C<staUserName>)
+
+=back
+
+=head2 Aruba Wireless AP Configuration Table (C<wlsrConfigTable>)
+
+=over
+
+=item $aruba->aruba_ap_channel()
+
+(C<apCurrentChannel>)
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/BlueCoatSG.pm

@@ -0,0 +1,168 @@
+package SNMP::Info::Layer3::BlueCoatSG;
+
+# Copyright (c) 2011 Netdisco Project
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::BlueCoatSG::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::BlueCoatSG::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,
+    'BLUECOAT-SG-PROXY-MIB' => 'sgProxyAdmin',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::Layer3::GLOBALS,
+    #From BLUECOAT-SG-PROXY-MIB
+    'serial1'=> 'sgProxySerialNumber',
+    'sw_ver' => 'sgProxyVersion',
+);
+
+%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'Blue Coat';
+}
+
+sub os {
+    return 'sgos';
+}
+
+sub os_ver {
+    my $sg = shift;
+    my $os_string = $sg->sw_ver();
+    if ($os_string =~ /^Version:\s(\w+)\s([\d\.]+)/) {
+        return $2;
+    } else {
+        return ''; # perhaps we can try sysDescr or some other object...
+    }
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::BlueCoatSG - SNMP Interface to Blue Coat SG Series proxy devices
+
+=head1 AUTHOR
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $router = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $router->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Blue Coat SG Series proxy devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+ BLUECOAT-SG-PROXY-MIB
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $router->vendor()
+
+Returns C<'Blue Coat'>
+
+=item $router->os()
+
+Returns C<'sgos'>
+
+=item $router->os_ver()
+
+Tries to resolve version string from C<"sgProxyVersion">.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut
+

Info/Layer3/C3550.pm

@@ -1,88 +1,118 @@
 # SNMP::Info::Layer3::C3550
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
-# Copyright (c) 2003, Regents of the University of California
+# Copyright (c) 2008-2009 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2004 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::C3550;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
-use SNMP::Info::Layer3;
 use SNMP::Info::CiscoVTP;
 use SNMP::Info::CiscoStack;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
+use SNMP::Info::CiscoStpExtensions;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+# NOTE : Top-most items gets precedence for @ISA
+@SNMP::Info::Layer3::C3550::ISA = qw/
+    SNMP::Info::CiscoVTP
+    SNMP::Info::CiscoStpExtensions
+    SNMP::Info::CiscoStack
+    SNMP::Info::LLDP
+    SNMP::Info::CDP
+    SNMP::Info::CiscoStats
+    SNMP::Info::CiscoImage
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower
+    SNMP::Info::Layer3
+    Exporter/;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
-@SNMP::Info::Layer3::C3550::ISA = qw/ SNMP::Info::Layer3 SNMP::Info::CiscoStack SNMP::Info::CiscoVTP  Exporter/;
 @SNMP::Info::Layer3::C3550::EXPORT_OK = qw//;
 
-$DEBUG=0;
+$VERSION = '3.03';
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+# NOTE: Order creates precedence
+#       Example: v_name exists in Bridge.pm and CiscoVTP.pm
+#       Bridge is called from Layer3 and CiscoStpExtensions
+#       So we want CiscoVTP to come last to get the right one.
+# The @ISA order should match these orders.
 
 %MIBS = (
-         %SNMP::Info::Layer3::MIBS,  
-         %SNMP::Info::CiscoVTP::MIBS,
-         %SNMP::Info::CiscoStack::MIBS,
-        );
+    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::LLDP::MIBS,               %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
+    %SNMP::Info::CiscoVTP::MIBS,
+);
+
 
 %GLOBALS = (
-            %SNMP::Info::Layer3::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-            %SNMP::Info::CiscoStack::GLOBALS,
-            'ports2'      => 'ifNumber',
-           );
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoImage::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoStack::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+);
 
 %FUNCS = (
-            %SNMP::Info::Layer3::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-            %SNMP::Info::CiscoStack::FUNCS,
-         );
+    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,               %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
+    %SNMP::Info::CiscoVTP::FUNCS,    
+);
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::Layer3::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-            %SNMP::Info::CiscoStack::MUNGE,
-         );
-
-# Pick and choose
-
-*SNMP::Info::Layer3::C3550::serial     = \&SNMP::Info::CiscoStack::serial;
-*SNMP::Info::Layer3::C3550::interfaces = \&SNMP::Info::Layer3::interfaces;
-*SNMP::Info::Layer3::C3550::i_duplex   = \&SNMP::Info::CiscoStack::i_duplex;
-*SNMP::Info::Layer3::C3550::i_duplex_admin = \&SNMP::Info::CiscoStack::i_duplex_admin;
-*SNMP::Info::Layer3::C3550::i_name     = \&SNMP::Info::Layer3::i_name;
-*SNMP::Info::Layer3::C3550::i_type     = \&SNMP::Info::CiscoStack::i_type;
+    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,               %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
+    %SNMP::Info::CiscoVTP::MUNGE,
+);
 
 sub vendor {
     return 'cisco';
@@ -90,12 +120,12 @@ sub vendor {
 
 sub model {
     my $c3550 = shift;
-    my $id = $c3550->id();
+    my $id    = $c3550->id();
     my $model = &SNMP::translateObj($id) || $id;
     $model =~ s/^catalyst//;
 
     # turn 355048 into 3550-48
-    if ($model =~ /^(35\d\d)(\d\d[T]?)$/) {
+    if ( $model =~ /^(35\d\d)(\d\d(T|G)?)$/ ) {
         $model = "$1-$2";
     }
     return $model;
@@ -105,42 +135,129 @@ sub model {
 sub ports {
     my $c3550 = shift;
 
-    my $ports2 = $c3550->ports2();    
-
-    my $id = $c3550->id();
+    my $id    = $c3550->id();
     my $model = &SNMP::translateObj($id);
-    if ($model =~ /(12|24|48)[T]?$/) {
+    if ( $model =~ /(12|24|48)(C|T|TS|G|TS-E|TS-S|T-E)?$/ ) {
         return $1;
     }
-    return $ports2;
+
+    my $ports = $c3550->orig_ports();
+    return $ports;
+}
+
+#  Verions prior to 12.1(22)EA1a use the older CiscoStack method
+#  Newer versions use the ETHERLIKE-MIB to report operational duplex.
+#  See http://www.ciscosystems.com/en/US/products/hw/switches/ps646/prod_release_note09186a00802a08ee.html
+
+sub i_duplex {
+    my $c3550   = shift;
+    my $partial = shift;
+
+    my $el_duplex = $c3550->el_duplex($partial);
+
+    # Newer software
+    if ( defined $el_duplex and scalar( keys %$el_duplex ) ) {
+        my %i_duplex;
+        foreach my $el_port ( keys %$el_duplex ) {
+            my $duplex = $el_duplex->{$el_port};
+            next unless defined $duplex;
+
+            $i_duplex{$el_port} = 'half' if $duplex =~ /half/i;
+            $i_duplex{$el_port} = 'full' if $duplex =~ /full/i;
+        }
+        return \%i_duplex;
+    }
+
+    # Fall back to CiscoStack method
+    else {
+        return $c3550->SUPER::i_duplex($partial);
+    }
+}
+
+# Software >= 12.1(22)EA1a uses portDuplex as admin setting
+
+sub i_duplex_admin {
+    my $c3550   = shift;
+    my $partial = shift;
+
+    my $el_duplex = $c3550->el_duplex($partial);
+
+    # Newer software
+    if ( defined $el_duplex and scalar( keys %$el_duplex ) ) {
+        my $p_port   = $c3550->p_port()   || {};
+        my $p_duplex = $c3550->p_duplex() || {};
+
+        my $i_duplex_admin = {};
+        foreach my $port ( keys %$p_duplex ) {
+            my $iid = $p_port->{$port};
+            next unless defined $iid;
+            next if ( defined $partial and $iid !~ /^$partial$/ );
+
+            $i_duplex_admin->{$iid} = $p_duplex->{$port};
+        }
+        return $i_duplex_admin;
+    }
+
+    # Fall back to CiscoStack method
+    else {
+        return $c3550->SUPER::i_duplex_admin($partial);
+    }
+}
+
+sub set_i_duplex_admin {
+
+    # map a textual duplex to an integer one the switch understands
+    my %duplexes = qw/half 1 full 2 auto 4/;
+
+    my $c3550 = shift;
+    my ( $duplex, $iid ) = @_;
+
+    my $el_duplex = $c3550->el_duplex($iid);
+
+    # Auto duplex only supported on newer software
+    if ( defined $el_duplex and scalar( keys %$el_duplex ) ) {
+        my $p_port = $c3550->p_port() || {};
+        my %reverse_p_port = reverse %$p_port;
+
+        $duplex = lc($duplex);
+
+        return 0 unless defined $duplexes{$duplex};
+
+        $iid = $reverse_p_port{$iid};
+
+        return $c3550->set_p_duplex( $duplexes{$duplex}, $iid );
+    }
+    else {
+        return $c3550->SUPER::set_i_duplex_admin;
+    }
 }
 
 sub cisco_comm_indexing {
-    1;
+    return 1;
 }
 
-
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::C3550 - Perl5 Interface to Cisco Catalyst 3550 Layer 2/3 Switches running IOS
+SNMP::Info::Layer3::C3550 - SNMP Interface to Cisco Catalyst 3550 Layer 2/3
+Switches running IOS
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $c3550 = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 2
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
@@ -151,12 +268,12 @@ Max Baker (C<max@warped.org>)
 
 Abstraction subclass for Cisco Catalyst 3550 Layer 2/3 Switches.  
 
-These devices run IOS but have some of the same charactersitics as the Catalyst WS-C family (5xxx,6xxx). 
-For example, forwarding tables are held in VLANs, and extened interface information
-is gleened from CISCO-SWITCH-MIB.
+These devices run IOS but have some of the same characteristics as the
+Catalyst WS-C family (5xxx,6xxx).  For example, forwarding tables are held in
+VLANs, and extended interface information is gleaned from F<CISCO-SWITCH-MIB>.
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $c3550 = new SNMP::Info::Layer3::C3550(...);
 
@@ -166,10 +283,24 @@ a more specific class using the method above.
 
 =item SNMP::Info::Layer3
 
+=item SNMP::Info::CiscoSTPExtensions
+
+=item SNMP::Info::CiscoPower
+
+=item SNMP::Info::CiscoPortSecurity
+
 =item SNMP::Info::CiscoVTP
 
 =item SNMP::Info::CiscoStack
 
+=item SNMP::Info::CDP
+
+=item SNMP::Info::LLDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoImage
+
 =back
 
 =head2 Required MIBs
@@ -178,11 +309,26 @@ a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See SNMP::Info::Layer3 for its own MIB requirements.
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoVTP for its own MIB requirements.
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoStack for its own MIB requirements.
+See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -194,37 +340,149 @@ These are methods that return scalar value from SNMP
 
 =item $c3550->vendor()
 
-    Returns 'cisco'
+Returns 'cisco'
+
+=item $c3550->model()
+
+Will take the translated model number and try to format it better.
+
+ 355048 -> 3550-48
+ 355012G -> 3550-12G
+
+=item $c3550->ports()
+
+Tries to cull the number of ports from the model number.
+
+=item $c3550->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
 
 =back
 
 =head2 Globals imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info::Layer3 for details.
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::CiscoStack
 
-See documentation in SNMP::Info::CiscoStack for details.
+See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
+=head2 Overrides
+
+=over
+
+=item $c3550->i_duplex()
+
+Returns reference to hash of iid to current link duplex setting.
+
+Software version 12.1(22)EA1a or greater returns duplex based upon the
+result of $c3550->el_duplex().  Otherwise it uses the result of
+the call to CiscoStack::i_duplex().
+
+See L<SNMP::Info::Etherlike> for el_duplex() method and
+L<SNMP::Info::CiscoStack> for its i_duplex() method.
+
+=item $c3550->i_duplex_admin()
+
+Returns reference to hash of iid to administrative duplex setting.
+
+Software version 12.1(22)EA1a or greater returns duplex based upon the
+result of $c3550->p_duplex().  Otherwise it uses the result of
+the call to CiscoStack::i_duplex().
+
+See L<SNMP::Info::CiscoStack> for its i_duplex() and p_duplex() methods.
+
+=item $c3550->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>.
+
+Speed choices are 'auto', 'half', 'full'.
+
+Crosses $c3550->p_port() with $c3550->p_duplex() to utilize port C<ifIndex>.
+
+    Example:
+    my %if_map = reverse %{$c3550->interfaces()};
+    $c3550->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
+        or die "Couldn't change port duplex. ",$c3550->error(1);
+
+=back
+
 =head2 Table Methods imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info::Layer3 for details.
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
 
 =head2 Table Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
-See documentation in SNMP::Info::CiscoStack for details.
+See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/C4000.pm

@@ -0,0 +1,319 @@
+# SNMP::Info::Layer3::C4000
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::C4000;
+
+use strict;
+use Exporter;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::MAU;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::C4000::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoConfig SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::C4000::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,
+    'CISCO-ENVMON-MIB' => 'ciscoEnvMonMIB',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoImage::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    'ps1_type'   => 'ciscoEnvMonSupplyStatusDescr.1',
+    'ps1_status' => 'ciscoEnvMonSupplyState.1',
+    'ps2_type'   => 'ciscoEnvMonSupplyStatusDescr.2',
+    'ps2_status' => 'ciscoEnvMonSupplyState.2',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,
+    'fan_state' => 'ciscoEnvMonFanState',
+    'fan_descr' => 'ciscoEnvMonFanStatusDescr',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,      %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE, %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE,  %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,         %SNMP::Info::CiscoVTP::MUNGE,
+);
+
+# Override Inheritance for these specific methods
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::C4000::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::C4000::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub fan {
+    my $c4000     = shift;
+    my $fan_state = $c4000->fan_state();
+    my $fan_descr = $c4000->fan_descr();
+    my $ret       = "";
+    my $s         = "";
+    foreach my $i ( sort { $a <=> $b } keys %$fan_state ) {
+        $ret .= $s . $fan_descr->{$i} . ": " . $fan_state->{$i};
+        $s = ", ";
+    }
+    return if ( $s eq "" );
+    return $ret;
+}
+
+sub cisco_comm_indexing { return 1; }
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::C4000 - SNMP Interface to Cisco Catalyst 4000 Layer 2/3
+Switches running IOS
+
+=head1 AUTHOR
+
+Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $c4000 = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $c4000->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Cisco Catalyst 4000 Layer 2/3 Switches.  
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $c4000 = new SNMP::Info::Layer3::C4000(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoImage
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::MAU
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $c4000->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=item $c4000->fan()
+
+Returns fan status
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $c4000->i_duplex()
+
+Parses mau_index and mau_link to return the duplex information for
+interfaces.
+
+=item $c4000->i_duplex_admin()
+
+Parses C<mac_index>,C<mau_autostat>,C<mau_type_admin> in
+order to find the admin duplex setting for all the interfaces.
+
+Returns either (auto,full,half).
+
+=item $c4000->i_speed_admin()
+
+Returns administrative speed for interfaces.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/C6500.pm

@@ -1,124 +1,234 @@
 # SNMP::Info::Layer3::C6500
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2003,2004 Max Baker
+# Copyright (c) 2008-2009 Max Baker
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the Author, nor 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::C6500;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
-use SNMP::Info::Layer3;
-use SNMP::Info::CiscoVTP;
 use SNMP::Info::CiscoStack;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoVTP;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+# NOTE : Top-most items gets precedence for @ISA
+@SNMP::Info::Layer3::C6500::ISA = qw/
+    SNMP::Info::CiscoVTP 
+    SNMP::Info::CiscoStpExtensions
+    SNMP::Info::CiscoStack
+    SNMP::Info::LLDP
+    SNMP::Info::CDP 
+    SNMP::Info::CiscoImage
+    SNMP::Info::CiscoStats
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower
+    SNMP::Info::Layer3
+    Exporter
+/;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
-@SNMP::Info::Layer3::C6500::ISA = qw/ SNMP::Info::Layer3 SNMP::Info::CiscoStack SNMP::Info::CiscoVTP  Exporter/;
 @SNMP::Info::Layer3::C6500::EXPORT_OK = qw//;
 
-$DEBUG=0;
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
+
+# NOTE: Order creates precedence
+#       Example: v_name exists in Bridge.pm and CiscoVTP.pm
+#       Bridge is called from Layer3 and CiscoStpExtensions
+#       So we want CiscoVTP to come last to get the right one.
+# The @ISA order should match these orders.
 
 %MIBS = (
-         %SNMP::Info::Layer3::MIBS,  
-         %SNMP::Info::CiscoVTP::MIBS,
-         %SNMP::Info::CiscoStack::MIBS,
-        );
+    %SNMP::Info::Layer3::MIBS,             %SNMP::Info::CiscoPower::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,        %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,         %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,                %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::CiscoStack::MIBS,         %SNMP::Info::CiscoStpExtensions::MIBS, 
+    %SNMP::Info::CiscoVTP::MIBS,    
+);
 
 %GLOBALS = (
-            %SNMP::Info::Layer3::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-            %SNMP::Info::CiscoStack::GLOBALS,
-           );
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoImage::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CiscoStack::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+);
 
 %FUNCS = (
-            %SNMP::Info::Layer3::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-            %SNMP::Info::CiscoStack::FUNCS,
-         );
+    %SNMP::Info::Layer3::FUNCS,             %SNMP::Info::CiscoPower::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,        %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS,         %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,                %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::CiscoStack::FUNCS,         %SNMP::Info::CiscoStpExtensions::FUNCS, 
+    %SNMP::Info::CiscoVTP::FUNCS,    
+);
+
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::Layer3::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-            %SNMP::Info::CiscoStack::MUNGE,
-         );
-
-# Pick and choose
-
-*SNMP::Info::Layer3::C6500::serial     = \&SNMP::Info::CiscoStack::serial;
-*SNMP::Info::Layer3::C6500::interfaces = \&SNMP::Info::Layer3::interfaces;
-*SNMP::Info::Layer3::C6500::i_duplex   = \&SNMP::Info::CiscoStack::i_duplex;
-#*SNMP::Info::Layer3::C6500::i_duplex_admin = \&SNMP::Info::Layer3::i_duplex_admin;
-*SNMP::Info::Layer3::C6500::i_name     = \&SNMP::Info::Layer3::i_name;
-*SNMP::Info::Layer3::C6500::i_type     = \&SNMP::Info::CiscoStack::i_type;
-
-sub model {
-    my $c6500 = shift;
-    my $model1 = $c6500->model1();
-    return $model1 if defined $model1;
-    return $c6500->SUPER::model();
-}
+    %SNMP::Info::Layer3::MUNGE,             %SNMP::Info::CiscoPower::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,        %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE,         %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,                %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::CiscoStack::MUNGE,         %SNMP::Info::CiscoStpExtensions::MUNGE, 
+    %SNMP::Info::CiscoVTP::MUNGE,    
+);
 
 sub vendor {
     return 'cisco';
 }
 
-sub cisco_comm_indexing {
-    1;
+sub cisco_comm_indexing { return 1; }
+
+#  Newer versions use the ETHERLIKE-MIB to report operational duplex.
+
+sub i_duplex {
+    my $c6500   = shift;
+    my $partial = shift;
+
+    my $el_duplex = $c6500->el_duplex($partial);
+
+    # Newer software
+    if ( defined $el_duplex and scalar( keys %$el_duplex ) ) {
+        my %i_duplex;
+        foreach my $el_port ( keys %$el_duplex ) {
+            my $duplex = $el_duplex->{$el_port};
+            next unless defined $duplex;
+
+            $i_duplex{$el_port} = 'half' if $duplex =~ /half/i;
+            $i_duplex{$el_port} = 'full' if $duplex =~ /full/i;
+        }
+        return \%i_duplex;
+    }
+
+    # Fall back to CiscoStack method
+    else {
+        return $c6500->SUPER::i_duplex($partial);
+    }
 }
 
+# Newer software uses portDuplex as admin setting
+
+sub i_duplex_admin {
+    my $c6500   = shift;
+    my $partial = shift;
+
+    my $el_duplex = $c6500->el_duplex($partial);
+
+    # Newer software
+    if ( defined $el_duplex and scalar( keys %$el_duplex ) ) {
+        my $p_port   = $c6500->p_port()   || {};
+        my $p_duplex = $c6500->p_duplex() || {};
+
+        my $i_duplex_admin = {};
+        foreach my $port ( keys %$p_duplex ) {
+            my $iid = $p_port->{$port};
+            next unless defined $iid;
+            next if ( defined $partial and $iid !~ /^$partial$/ );
+
+            $i_duplex_admin->{$iid} = $p_duplex->{$port};
+        }
+        return $i_duplex_admin;
+    }
+
+    # Fall back to CiscoStack method
+    else {
+        return $c6500->SUPER::i_duplex_admin($partial);
+    }
+}
+
+sub set_i_duplex_admin {
+
+    # map a textual duplex to an integer one the switch understands
+    my %duplexes = qw/half 1 full 2 auto 4/;
+
+    my $c6500 = shift;
+    my ( $duplex, $iid ) = @_;
+
+    my $el_duplex = $c6500->el_duplex($iid);
+
+    # Auto duplex only supported on newer software
+    if ( defined $el_duplex and scalar( keys %$el_duplex ) ) {
+        my $p_port = $c6500->p_port() || {};
+        my %reverse_p_port = reverse %$p_port;
+
+        $duplex = lc($duplex);
+
+        return 0 unless defined $duplexes{$duplex};
+
+        $iid = $reverse_p_port{$iid};
+
+        return $c6500->set_p_duplex( $duplexes{$duplex}, $iid );
+    }
+    else {
+        return $c6500->SUPER::set_i_duplex_admin;
+    }
+}
 
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::C6500 - Perl5 Interface to Cisco Catalyst 6500 Layer 2/3 Switches running IOS and/or CatOS
+SNMP::Info::Layer3::C6500 - SNMP Interface to Cisco Catalyst 6500 Layer 2/3
+Switches running IOS and/or CatOS
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $c6500 = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 2
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
@@ -129,12 +239,12 @@ Max Baker (C<max@warped.org>)
 
 Abstraction subclass for Cisco Catalyst 6500 Layer 2/3 Switches.  
 
-These devices run IOS but have some of the same charactersitics as the Catalyst WS-C family (5xxx). 
-For example, forwarding tables are held in VLANs, and extened interface information
-is gleened from CISCO-SWITCH-MIB.
+These devices run IOS but have some of the same characteristics as the
+Catalyst WS-C family (5xxx). For example, forwarding tables are held in
+VLANs, and extended interface information is gleaned from F<CISCO-SWITCH-MIB>.
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $c6500 = new SNMP::Info::Layer3::C6500(...);
 
@@ -142,12 +252,26 @@ a more specific class using the method above.
 
 =over
 
-=item SNMP::Info::Layer3
-
 =item SNMP::Info::CiscoVTP
 
 =item SNMP::Info::CiscoStack
 
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoImage
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::CiscoPower
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::CiscoStpExtensions
+
 =back
 
 =head2 Required MIBs
@@ -156,11 +280,26 @@ a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See SNMP::Info::Layer3 for its own MIB requirements.
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoVTP for its own MIB requirements.
+See L<SNMP::Info::CiscoStack/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoStack for its own MIB requirements.
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -174,36 +313,137 @@ These are methods that return scalar value from SNMP
 
     Returns 'cisco'
 
+=item $c6500->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in SNMP::Info::Layer3 for details.
-
 =head2 Global Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
 
 =head2 Global Methods imported from SNMP::Info::CiscoStack
 
-See documentation in SNMP::Info::CiscoStack for details.
+See documentation in L<SNMP::Info::CiscoStack/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
+=head2 Overrides
 
-See documentation in SNMP::Info::Layer3 for details.
+=over
+
+=item $c6500->i_duplex()
+
+Returns reference to hash of iid to current link duplex setting.
+
+Newer software versions return duplex based upon the result of
+$c6500->el_duplex().  Otherwise it uses the result of the call to
+CiscoStack::i_duplex().
+
+See L<SNMP::Info::Etherlike> for el_duplex() method and
+L<SNMP::Info::CiscoStack> for its i_duplex() method.
+
+=item $c6500->i_duplex_admin()
+
+Returns reference to hash of iid to administrative duplex setting.
+
+Newer software versions return duplex based upon the result of
+$c6500->p_duplex().  Otherwise it uses the result of the call to
+CiscoStack::i_duplex().
+
+See L<SNMP::Info::CiscoStack> for its i_duplex() and p_duplex() methods.
+
+=item $c6500->set_i_duplex_admin(duplex, ifIndex)
+
+Sets port duplex, must be supplied with duplex and port C<ifIndex>.
+
+Speed choices are 'auto', 'half', 'full'.
+
+Crosses $c6500->p_port() with $c6500->p_duplex() to utilize port C<ifIndex>.
+
+    Example:
+    my %if_map = reverse %{$c6500->interfaces()};
+    $c6500->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
+        or die "Couldn't change port duplex. ",$c6500->error(1);
+
+=back
 
 =head2 Table Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::CiscoStack
 
-See documentation in SNMP::Info::CiscoStack for details.
+See documentation in L<SNMP::Info::CiscoStack/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
 
 =cut
 

Info/Layer3/Cisco.pm

@@ -1,94 +1,148 @@
 # SNMP::Info::Layer3::Cisco
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker
-# 
-# Redistribution and use in source and binary forms, with or without 
+# Copyright (c) 2008 Max Baker
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::Cisco;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
-use SNMP::Info::Layer3;
 use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoRTT;
+use SNMP::Info::CiscoQOS;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE $INIT/ ;
-@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::Layer3 SNMP::Info::CiscoVTP Exporter/;
+@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
+    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
+    SNMP::Info::Layer3
+    Exporter/;
 @SNMP::Info::Layer3::Cisco::EXPORT_OK = qw//;
 
-$DEBUG=0;
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-#       the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
 
 %MIBS = (
-         %SNMP::Info::Layer3::MIBS,  
-         %SNMP::Info::CiscoVTP::MIBS,
-        );
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoPower::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoQOS::MIBS,
+    %SNMP::Info::CiscoRTT::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,
+    %SNMP::Info::CiscoStats::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::CiscoVTP::MIBS,
+    'CISCO-EIGRP-MIB' => 'cEigrpAsRouterId',
+);
 
 %GLOBALS = (
-            %SNMP::Info::Layer3::GLOBALS,
-            %SNMP::Info::CiscoVTP::GLOBALS,
-           );
+    %SNMP::Info::Layer3::GLOBALS,      %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS, %SNMP::Info::CiscoQOS::GLOBALS,
+    %SNMP::Info::CiscoRTT::GLOBALS,    %SNMP::Info::CiscoImage::GLOBALS,
+    %SNMP::Info::CiscoStats::GLOBALS,  %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS, 'eigrp_id' => 'cEigrpAsRouterId',
+);
 
 %FUNCS = (
-            %SNMP::Info::Layer3::FUNCS,
-            %SNMP::Info::CiscoVTP::FUNCS,
-         );
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoPower::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoQOS::FUNCS,
+    %SNMP::Info::CiscoRTT::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS,
+    %SNMP::Info::CiscoStats::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::CiscoVTP::FUNCS,
+
+    # EIGRP
+    'eigrp_peers' => 'cEigrpPeerAddr',
+);
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::Layer3::MUNGE,
-            %SNMP::Info::CiscoVTP::MUNGE,
-         );
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoPower::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoQOS::MUNGE,
+    %SNMP::Info::CiscoRTT::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE,
+    %SNMP::Info::CiscoStats::MUNGE,
+    %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::CiscoVTP::MUNGE,
+    'eigrp_peers' => \&SNMP::Info::munge_ip,
+);
 
+sub i_vlan {
+    my ($cisco)   = shift;
+    my ($partial) = shift;
+
+    my ($i_type)  = $cisco->i_type($partial);
+    my ($i_descr) = $cisco->i_description($partial);
+    my %i_vlan;
+
+    foreach my $idx ( keys %$i_descr ) {
+        if ( $i_type->{$idx} eq 'l2vlan' || $i_type->{$idx} eq 135 ) {
+            if ( $i_descr->{$idx} =~ /\.(\d+)$/ ) {
+                $i_vlan{$idx} = $1;
+            }
+        }
+    }
+    return \%i_vlan;
+}
 
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Cisco - Perl5 Interface to Generic L3 Cisco Device
+SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device
+that are not covered in other classes.
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
  # Let SNMP::Info determine the correct subclass for you. 
  my $cisco = new SNMP::Info(
-                          AutoSpecify => 1,
-                          Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
-                          DestHost    => 'myswitch',
-                          Community   => 'public',
-                          Version     => 2
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
@@ -103,21 +157,51 @@ Subclass for Generic Cisco Routers running IOS
 
 =over
 
-=item SNMP::Info::Layer3
-
 =item SNMP::Info::CiscoVTP
 
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoStats
+
+=item SNMP::Info::CiscoImage
+
+=item SNMP::Info::CiscoRTT
+
+=item SNMP::Info::CiscoQOS
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::Power
+
+=item SNMP::Info::Layer3
+
 =back
 
 =head2 Required MIBs
 
 =over
 
+=item F<CISCO-EIGRP-MIB>
+
 =item Inherited Classes' MIBs
 
-See SNMP::Info::Layer3 for its own MIB requirements.
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::CiscoVTP for its own MIB requirements.
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStats/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoRTT/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoQOS/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -131,28 +215,101 @@ These are methods that return scalar value from SNMP
 
     Returns 'cisco'
 
+=item $cisco->eigrp_id()
+
+(C<cEigrpAsRouterId>)
+
 =back
 
-=head2 Globals imported from SNMP::Info::Layer3
-
-See documentation in SNMP::Info::Layer3 for details.
-
 =head2 Global Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
 
+=head2 Globals imported from SNMP::Info::CDP
 
-=head1 TABLE ENTRIES
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 Table Methods imported from SNMP::Info::Layer3
+=over
 
-See documentation in SNMP::Info::Layer3 for details.
+=item $cisco->eigrp_peers()
+
+Returns EIGRP peer IP addresses
+
+(C<cEigrpPeerAddr>)
+
+=item $cisco->i_vlan()
+
+Returns a mapping between C<ifIndex> and the PVID or default VLAN.
+
+=back
 
 =head2 Table Methods imported from SNMP::Info::CiscoVTP
 
-See documentation in SNMP::Info::CiscoVTP for details.
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/CiscoASA.pm

@@ -0,0 +1,252 @@
+# SNMP::Info::Layer3::CiscoASA
+# $Id$
+#
+# Copyright (c) 2013 Moe Kraus
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoASA;
+
+use strict;
+use Exporter;
+use SNMP::Info::CiscoVTP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoStats;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoRTT;
+use SNMP::Info::CiscoQOS;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
+use SNMP::Info::Layer3::Cisco;
+
+@SNMP::Info::Layer3::CiscoASA::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
+    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
+    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
+    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
+    SNMP::Info::Layer3::Cisco
+    SNMP::Info::Layer3
+    Exporter/;
+@SNMP::Info::Layer3::CiscoASA::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+       %SNMP::Info::Layer3::Cisco::MIBS,
+);
+
+%GLOBALS = (
+       %SNMP::Info::Layer3::Cisco::GLOBALS,
+);
+
+%FUNCS = (
+       %SNMP::Info::Layer3::Cisco::FUNCS,
+    'mac_table' => 'ifPhysAddress',
+);
+
+%MUNGE = (
+       %SNMP::Info::Layer3::Cisco::MUNGE,
+    'mac_table'  => \&SNMP::Info::munge_mac, );
+
+sub b_mac {
+       my ($asa) = shift;
+       my $macs = $asa->mac_table();
+       my @macs;
+       # gather physical addresses
+       foreach my $i ( keys %$macs ) {
+               my $mac = $macs->{$i};
+               # don't catch the bad macs with zeroed OUI
+               if ( $mac !~ m/(0{1,2}:){3}/ ) {
+                       push( @macs, $mac);
+               }
+               @macs = sort( @macs );
+       }
+       # return the least mac
+       return $macs[0];
+}
+
+sub i_description {
+    my $self = shift;
+    my $partial   = shift;
+
+    my $i_descr = $self->orig_i_description($partial) || {};
+
+    foreach my $ifindex ( keys %$i_descr ) {
+        $i_descr->{$ifindex} =~ /'(.*)'/;
+        $i_descr->{$ifindex} = $1
+            if defined $1;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoASA - Cisco Adaptive Security Appliance
+
+=head1 AUTHOR
+
+Moe Kraus
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $cisco = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $asa->class();
+ print "SNMP::Info determined this device to fall under subclass: $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Cisco ASAs
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3::Cisco
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-EIGRP-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $asa->b_mac()
+
+Returns base mac.
+Overrides base mac function in L<SNMP::Info::Layer3>.
+
+=item $asa->i_description()
+
+Overrides base interface description function in L<SNMP::Info> to return the
+configured interface name instead of "Adaptive Security Appliance
+'$configured interface name' interface".
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoRTT
+
+See documentation in L<SNMP::Info::CiscoRTT/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoQOS
+
+See documentation in L<SNMP::Info::CiscoQOS/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/CiscoFWSM.pm

@@ -0,0 +1,223 @@
+# SNMP::Info::Layer3::CiscoFWSM
+# $Id$
+#
+# Copyright (c) 2010 Brian De Wolf
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::CiscoFWSM;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3::Cisco;
+
+@SNMP::Info::Layer3::CiscoFWSM::ISA = qw/SNMP::Info::Layer3::Cisco
+    Exporter/;
+@SNMP::Info::Layer3::CiscoFWSM::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::Cisco::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::Cisco::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::Cisco::FUNCS,
+
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::Cisco::MUNGE,
+);
+
+
+# For FWSMs, the ipNetToPhysicalPhysAddress table appears to be of the form:
+# $ifindex.$inetaddresstype.$proto.$ip_address -> $mac_address
+#
+# Using the output of ipNetToPhysicalPhysAddress, we can emulate the other
+# functions.
+#
+# This doesn't really line up to what at_* return, so we munge it
+
+sub at_paddr {
+    my ($fwsm)    = shift;
+    my ($partial)  = shift;
+
+    my $paddrs = $fwsm->n2p_paddr($partial);
+    my $n_paddrs = {};
+    
+    foreach my $key (keys %$paddrs) {
+        my $paddr = $paddrs->{$key};
+        my @parts = split /\./, $key;
+	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
+	my $ip = join ".", @parts;
+
+	next if($proto != 4); # at_paddr doesn't support non-IPv4
+
+        $n_paddrs->{"$ifindex.$ip"} = $paddr;
+    }
+    return $n_paddrs;
+}
+
+sub at_netaddr {
+    my ($fwsm)    = shift;
+    my ($partial)  = shift;
+
+    my $paddrs = $fwsm->n2p_paddr($partial);
+
+    my $netaddrs = {};
+    
+    foreach my $key (keys %$paddrs) {
+        my $paddr = $paddrs->{$key};
+        my @parts = split /\./, $key;
+	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
+	my $ip = join ".", @parts;
+
+	next if($proto != 4); # at_netaddr doesn't support non-IPv4
+
+        $netaddrs->{"$ifindex.$ip"} = $ip;
+    }
+    return $netaddrs;
+}
+
+sub at_ifaddr {
+    my ($fwsm)    = shift;
+    my ($partial)  = shift;
+
+    my $paddrs = $fwsm->n2p_paddr($partial);
+
+    my $ifaddrs = {};
+    
+    foreach my $key (keys %$paddrs) {
+        my $paddr = $paddrs->{$key};
+        my @parts = split /\./, $key;
+	my ($ifindex, $addrtype, $proto) = splice @parts, 0, 3;
+	my $ip = join ".", @parts;
+
+	next if($proto != 4); # at_ifaddr doesn't support non-IPv4
+
+        $ifaddrs->{"$ifindex.$ip"} = $ip;
+    }
+    return $ifaddrs;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::CiscoFWSM - SNMP Interface to Firewall Services Modules for
+features not covered elsewhere.
+
+=head1 AUTHOR
+
+Brian De Wolf
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $fwsm = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $fwsm->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Cisco Firewall Services Modules
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3::Cisco
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3::Cisco/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+=head2 Global Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $fwsm->at_paddr()
+
+This function derives the at_paddr information from the n2p_paddr() table as
+the MIB to provide that information isn't supported on FWSM.
+
+=item $fwsm->at_netaddr()
+
+This function derives the at_netaddr information from the n2p_paddr() table as
+the MIB to provide that information isn't supported on FWSM.
+
+=item $fwsm->at_ifaddr()
+
+This function derives the at_ifaddr information from the n2p_paddr() table as
+the MIB to provide that information isn't supported on FWSM.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3::Cisco
+
+See documentation in L<SNMP::Info::Layer3::Cisco/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Contivity.pm

@@ -1,85 +1,74 @@
 # SNMP::Info::Layer3::Contivity
-# Eric Miller <eric@jeneric.org>
 # $Id$
 #
-# Copyright (c) 2004 Max Baker
+# Copyright (c) 2010 Eric Miller
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::Contivity;
-$VERSION = 0.9;
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
+use SNMP::Info::Layer3;
 use SNMP::Info::Entity;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
-
-@SNMP::Info::Layer3::Contivity::ISA = qw/SNMP::Info SNMP::Info::Entity Exporter/;
+@SNMP::Info::Layer3::Contivity::ISA
+    = qw/SNMP::Info SNMP::Info::Layer3 SNMP::Info::Entity Exporter/;
 @SNMP::Info::Layer3::Contivity::EXPORT_OK = qw//;
 
-$DEBUG=0;
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-# See SNMP::Info for the details of these data structures and 
-# the interworkings.
-$INIT = 0;
+$VERSION = '3.03';
 
 %MIBS = (
-         %SNMP::Info::MIBS,
-         %SNMP::Info::Entity::MIBS,
-        );
+    %SNMP::Info::MIBS, %SNMP::Info::Layer3::MIBS, %SNMP::Info::Entity::MIBS,
+);
 
 %GLOBALS = (
-           %SNMP::Info::GLOBALS,
-           %SNMP::Info::Entity::GLOBALS,
-           );
+    %SNMP::Info::GLOBALS, %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::Entity::GLOBALS,
+);
 
 %FUNCS = (
-          %SNMP::Info::FUNCS,
-          %SNMP::Info::Entity::FUNCS,
-          'i_name2'     => 'ifName',
-          # From RFC1213-MIB
-          'at_index'    => 'ipNetToMediaIfIndex',
-          'at_paddr'    => 'ipNetToMediaPhysAddress',
-          'at_netaddr'  => 'ipNetToMediaNetAddress',
-         );
-         
+    %SNMP::Info::FUNCS, %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::Entity::FUNCS,
+);
+
 %MUNGE = (
-          %SNMP::Info::MUNGE,
-          %SNMP::Info::Entity::MUNGE,
-          'at_paddr' => \&SNMP::Info::munge_mac,
-         );
+    %SNMP::Info::MUNGE, %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::Entity::MUNGE,
+);
 
 sub layers {
     return '00000100';
 }
 
 sub vendor {
-    return 'nortel';
+    return 'avaya';
 }
 
 sub model {
@@ -87,9 +76,9 @@ sub model {
     my $e_model = $contivity->e_model() || {};
 
     my $model = $e_model->{1} || undef;
-    
-    return $1 if (defined $model and $model =~ /(CES\d+)/i);
-    return undef;
+
+    return $1 if ( defined $model and $model =~ /(CES\d+|NVR\d+)/i );
+    return;
 }
 
 sub os {
@@ -98,26 +87,26 @@ sub os {
 
 sub os_ver {
     my $contivity = shift;
-    my $descr = $contivity->description();
-    return undef unless defined $descr;
+    my $descr     = $contivity->description();
+    return unless defined $descr;
 
-    if ($descr =~ m/V(\d+_\d+\.\d+)/i){
+    if ( $descr =~ m/V(\d+_\d+\.\d+)/i ) {
         return $1;
     }
-    return undef;
+    return;
 }
 
 sub mac {
     my $contivity = shift;
-    my $i_mac = $contivity->i_mac();
+    my $i_mac     = $contivity->i_mac();
 
-# Return Interface MAC   
-    foreach my $entry (keys %$i_mac){
+    # Return Interface MAC
+    foreach my $entry ( keys %$i_mac ) {
         my $sn = $i_mac->{$entry};
         next unless $sn;
         return $sn;
     }
-    return undef;
+    return;
 }
 
 sub serial {
@@ -125,21 +114,23 @@ sub serial {
     my $e_serial = $contivity->e_serial() || {};
 
     my $serial = $e_serial->{1} || undef;
-    
-    return $1 if (defined $serial and $serial =~ /(\d+)/);
-    return undef;
-}
 
+    return $1 if ( defined $serial and $serial =~ /(\d+)/ );
+    return;
+}
 
 sub interfaces {
     my $contivity = shift;
-    my $description = $contivity->i_description();
-    
+    my $partial   = shift;
+
+    my $description = $contivity->i_description($partial) || {};
+
     my %interfaces = ();
-    foreach my $iid (keys %$description){
+    foreach my $iid ( keys %$description ) {
         my $desc = $description->{$iid};
+
         # Skip everything except Ethernet interfaces
-        next unless (defined $desc and $desc =~ /fe/i);
+        next unless ( defined $desc and $desc =~ /fe/i );
 
         $interfaces{$iid} = $desc;
     }
@@ -148,33 +139,22 @@ sub interfaces {
 
 sub i_name {
     my $contivity = shift;
-    my $i_name2 = $contivity->i_name2();
-    
+    my $partial   = shift;
+
+    my $i_name2 = $contivity->orig_i_name($partial) || {};
+
     my %i_name;
-    foreach my $iid (keys %$i_name2){
-	my $name = $i_name2->{$iid};
-       #Skip everything except Ethernet interfaces
-	next unless (defined $name and $name =~ /fe/i);
-	
-	$name = $1 if $name =~ /(fei\.\d+\.\d+)/;
-	
-	$i_name{$iid} = $name;
-     }
-     return \%i_name;
-}
+    foreach my $iid ( keys %$i_name2 ) {
+        my $name = $i_name2->{$iid};
 
-sub root_ip {
-    my $contivity = shift;
-    my $ip_table = $contivity->ip_table();
+        #Skip everything except Ethernet interfaces
+        next unless ( defined $name and $name =~ /fe/i );
 
-# Return First IP Address    
-    foreach my $entry (keys %$ip_table){
-        my $router_ip = $ip_table->{$entry};
-        print " SNMP::Layer3::Contivity::root_ip() using $router_ip\n" if $DEBUG;
-        next unless $router_ip;
-        return $router_ip if ($router_ip ne '0.0.0.0');
+        $name = $1 if $name =~ /(fei\.\d+\.\d+)/;
+
+        $i_name{$iid} = $name;
     }
-    return undef;
+    return \%i_name;
 }
 
 1;
@@ -182,12 +162,12 @@ __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Contivity - Perl5 Interface to Nortel Networks' Contivity
-Extranet Switches (CES).
+SNMP::Info::Layer3::Contivity - SNMP Interface to Avaya/Nortel VPN Routers
+(formerly Contivity Extranet Switches).
 
 =head1 AUTHOR
 
-Eric Miller (C<eric@jeneric.org>)
+Eric Miller
 
 =head1 SYNOPSIS
 
@@ -195,22 +175,22 @@ Eric Miller (C<eric@jeneric.org>)
  my $contivity = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $contivity->class();
+ my $class = $contivity->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
 
-Abstraction subclass for Nortel Networks' Contivity Extranet Switch (CES).  
+Abstraction subclass for Avaya/Nortel VPN Routers (formerly Contivity
+Extranet Switch).  
 
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above. 
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
 
  my $contivity = new SNMP::Info::Layer3::Contivity(...);
 
@@ -220,6 +200,8 @@ a more specific class using the method above.
 
 =item SNMP::Info
 
+=item SNMP::Info::Layer3
+
 =item SNMP::Info::Entity
 
 =back
@@ -230,9 +212,11 @@ a more specific class using the method above.
 
 =item Inherited Classes' MIBs
 
-See SNMP::Info for its own MIB requirements.
+See L<SNMP::Info/"Required MIBs"> for its own MIB requirements.
 
-See SNMP::Info::Entity for its own MIB requirements.
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::Entity/"Required MIBs"> for its own MIB requirements.
 
 =back
 
@@ -244,37 +228,32 @@ These are methods that return scalar value from SNMP
 
 =item $contivity->vendor()
 
-Returns 'Nortel'
+Returns 'avaya'
 
 =item $contivity->model()
 
 Returns the chassis name.
 
-(B<entPhysicalModelName.1>)
+(C<entPhysicalModelName.1>)
 
 =item $contivity->os()
 
-Returns 'CES'
+Returns C<'CES'>
 
 =item $contivity->os_ver()
 
-Returns the software version extracted from (B<sysDescr>).
+Returns the software version extracted from (C<sysDescr>).
 
 =item $contivity->serial()
 
 Returns the chassis serial number.
 
-(B<entPhysicalSerialNum.1>)
+(C<entPhysicalSerialNum.1>)
 
 =item $contivity->mac()
 
 Returns the MAC address of the first Ethernet Interface.
 
-=item $contivity->root_ip()
-
-Returns the primary IP used to communicate with the router.  Returns the first
-IP interface.
-
 =back
 
 =head2 Overrides
@@ -290,13 +269,17 @@ layers.
 
 =head2 Globals imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
 =head2 Globals imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::Entity for details.
+See documentation in L<SNMP::Info::Entity/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -307,41 +290,25 @@ to a hash.
 
 =item $contivity->interfaces()
 
-Returns reference to the map between IID and physical Port.  Skips loopback and
-tunnel interfaces.
+Returns reference to the map between IID and physical Port.  Skips loopback
+and tunnel interfaces.
 
-=back
+=item $contivity->i_name()
 
-=head2 RFC1213 Arp Cache Table (B<ipNetToMediaTable>)
-
-=over
-
-=item $contivity->at_index()
-
-Returns reference to hash.  Maps ARP table entries to Interface IIDs 
-
-(B<ipNetToMediaIfIndex>)
-
-=item $contivity->at_paddr()
-
-Returns reference to hash.  Maps ARP table entries to MAC addresses. 
-
-(B<ipNetToMediaPhysAddress>)
-
-=item $contivity->at_netaddr()
-
-Returns reference to hash.  Maps ARP table entries to IPs 
-
-(B<ipNetToMediaNetAddress>)
+Interface Name field.  Skips loopback and tunnel interfaces.
 
 =back
 
 =head2 Table Methods imported from SNMP::Info
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
 =head2 Table Methods imported from SNMP::Info::Entity
 
-See documentation in SNMP::Info::Entity for details.
+See documentation in L<SNMP::Info::Entity/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/Dell.pm

@@ -0,0 +1,436 @@
+# SNMP::Info::Layer3::Dell - SNMP Interface to Dell devices
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Dell;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Dell::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Dell::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'RADLAN-Physicaldescription-MIB' => 'rlPhdStackReorder',
+    'RADLAN-rlInterfaces'            => 'rlIfNumOfLoopbackPorts',
+    'RADLAN-HWENVIROMENT'            => 'rlEnvPhysicalDescription',
+    'Dell-Vendor-MIB'                => 'productIdentificationVersion',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'os_ver'       => 'productIdentificationVersion',
+    'dell_id_name' => 'productIdentificationDisplayName',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+
+    # RADLAN-rlInterfaces:swIfTable
+    'dell_duplex_admin' => 'swIfDuplexAdminMode',
+    'dell_duplex'       => 'swIfDuplexOperMode',
+    'dell_tag_mode'     => 'swIfTaggedMode',
+    'dell_i_type'       => 'swIfType',
+    'dell_fc_admin'     => 'swIfFlowControlMode',
+    'dell_speed_admin'  => 'swIfSpeedAdminMode',
+    'dell_auto'         => 'swIfSpeedDuplexAutoNegotiation',
+    'dell_fc'           => 'swIfOperFlowControlMode',
+
+    # RADLAN-Physicaldescription-MIB:rlPhdUnitGenParamTable
+    'dell_unit'      => 'rlPhdUnitGenParamStackUnit',
+    'dell_sw_ver'    => 'rlPhdUnitGenParamSoftwareVersion',
+    'dell_fw_ver'    => 'rlPhdUnitGenParamFirmwareVersion',
+    'dell_hw_ver'    => 'rlPhdUnitGenParamHardwareVersion',
+    'dell_serial_no' => 'rlPhdUnitGenParamSerialNum',
+    'dell_asset_no'  => 'rlPhdUnitGenParamAssetTag',
+
+    # RADLAN-COPY-MIB:rlCopyTable
+    'dell_cp_idx'     => 'rlCopyIndex',
+    'dell_cp_sloc'    => 'rlCopySourceLocation',
+    'dell_cp_sip'     => 'rlCopySourceIpAddress',
+    'dell_cp_sunit'   => 'rlCopySourceUnitNumber',
+    'dell_cp_sfile'   => 'rlCopySourceFileName',
+    'dell_cp_stype'   => 'rlCopySourceFileType',
+    'dell_cp_dloc'    => 'rlCopyDestinationLocation',
+    'dell_cp_dip'     => 'rlCopyDestinationIpAddress',
+    'dell_cp_dunit'   => 'rlCopyDestinationUnitNumber',
+    'dell_cp_dfile'   => 'rlCopyDestinationFileName',
+    'dell_cp_dtype'   => 'rlCopyDestinationFileType',
+    'dell_cp_state'   => 'rlCopyOperationState',
+    'dell_cp_bkgnd'   => 'rlCopyInBackground',
+    'dell_cp_rstatus' => 'rlCopyRowStatus',
+
+    # RADLAN-HWENVIROMENT:rlEnvMonSupplyStatusTable
+    'dell_pwr_src'   => 'rlEnvMonSupplySource',
+    'dell_pwr_state' => 'rlEnvMonSupplyState',
+    'dell_pwr_desc'  => 'rlEnvMonSupplyStatusDescr',
+
+    # RADLAN-HWENVIROMENT:rlEnvMonFanStatusTable
+    'dell_fan_state' => 'rlEnvMonFanState',
+    'dell_fan_desc'  => 'rlEnvMonFanStatusDescr',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE, );
+
+# Method OverRides
+
+sub model {
+    my $dell = shift;
+
+    my $name  = $dell->dell_id_name();
+    my $descr = $dell->description();
+
+    if ( defined $name and $name =~ m/(\d+)/ ) {
+        return $1;
+    }
+
+    # Don't have a vendor MIB for D-Link
+    else {
+        return $descr;
+    }
+}
+
+sub vendor {
+    my $dell = shift;
+
+    return $dell->_vendor();
+}
+
+sub os {
+    my $dell = shift;
+
+    return $dell->_vendor();
+}
+
+sub serial {
+    my $dell = shift;
+
+    my $numbers = $dell->dell_serial_no();
+
+    foreach my $key ( keys %$numbers ) {
+        my $serial = $numbers->{$key};
+        return $serial if ( defined $serial and $serial !~ /^\s*$/ );
+        next;
+    }
+
+    # Last resort
+    return $dell->SUPER::serial();
+}
+
+sub interfaces {
+    my $dell    = shift;
+    my $partial = shift;
+
+    my $i_descr = $dell->i_description($partial) || {};
+    my $i_name  = $dell->orig_i_name($partial)   || {};
+
+    # Descriptions are all the same on some Dells, so use name instead if
+    # available
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        $i_descr->{$iid} = $name;
+    }
+
+    return $i_descr;
+}
+
+sub i_duplex_admin {
+    my $dell    = shift;
+    my $partial = shift;
+
+    my $interfaces  = $dell->interfaces($partial)        || {};
+    my $dell_duplex = $dell->dell_duplex_admin($partial) || {};
+    my $dell_auto   = $dell->dell_auto($partial)         || {};
+
+    my %i_duplex_admin;
+    foreach my $if ( keys %$interfaces ) {
+        my $duplex = $dell_duplex->{$if};
+        next unless defined $duplex;
+        my $auto = $dell_auto->{$if} || 'false';
+
+        $duplex = 'half' if ( $duplex =~ /half/i and $auto =~ /false/i );
+        $duplex = 'full' if ( $duplex =~ /half/i and $auto =~ /false/i );
+        $duplex = 'auto' if $auto =~ /true/i;
+        $i_duplex_admin{$if} = $duplex;
+    }
+    return \%i_duplex_admin;
+}
+
+# Use same methods as netgear.  Some device didn't implement the bridge MIB
+# forwarding table and some don't return MACs for VLANs other than default yet
+# don't support community indexing, so we use the Q-BRIDGE-MIB forwarding
+# table.  Fall back to the orig functions if the qb versions don't
+# return anything.
+sub fw_mac {
+    my $dell = shift;
+    my $ret  = $dell->qb_fw_mac();
+    $ret = $dell->orig_fw_mac() if ( !defined($ret) );
+    return $ret;
+}
+
+sub fw_port {
+    my $dell = shift;
+    my $ret  = $dell->qb_fw_port();
+    $ret = $dell->orig_fw_port() if ( !defined($ret) );
+    return $ret;
+}
+
+sub _vendor {
+    my $dell = shift;
+
+    my $id = $dell->id() || 'undef';
+    my %oidmap = (
+        2    => 'ibm',
+        171  => 'dlink',
+        674  => 'dell',
+        3955 => 'linksys',
+    );
+    $id = $1 if ( defined($id) && $id =~ /^\.1\.3\.6\.1\.4\.1\.(\d+)/ );
+
+    if ( defined($id) and exists( $oidmap{$id} ) ) {
+        return $oidmap{$id};
+    }
+    else {
+        return 'dlink';
+    }
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Dell - SNMP Interface to Dell Power Connect Network
+Devices
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $dell = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $dell->class();
+
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from an 
+Dell Power Connect device through SNMP.  D-Link and the IBM BladeCenter
+Gigabit Ethernet Switch Module also use this module based upon MIB support. 
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $dell = new SNMP::Info::Layer3::Dell(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<Dell-Vendor-MIB>
+
+=item F<RADLAN-Physicaldescription-MIB>
+
+=item F<RADLAN-rlInterfaces>
+
+=item F<RADLAN-HWENVIROMENT>
+
+=item Inherited Classes' MIBs
+
+See classes listed above for their required MIBs.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $dell->os_ver()
+
+(C<productIdentificationVersion>)
+
+=item $dell->dell_id_name()
+
+(C<productIdentificationDisplayName>)
+
+=item $dell->model()
+
+Returns model type.  Returns numeric from
+(C<productIdentificationDisplayName>) if available, otherwise if returns
+description().
+
+=item $dell->vendor()
+
+Returns 'dell', 'dlink', or 'ibm' based upon the IANA enterprise number in
+id().  Defaults to 'dlink'.
+
+=item $dell->os()
+
+Returns 'dell', 'dlink', or 'ibm' based upon the IANA enterprise number in
+id().  Defaults to 'dlink'.
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $dell->serial()
+
+Returns serial number. Returns (C<rlPhdUnitGenParamSerialNum>) if available,
+otherwise uses the Layer3 serial method.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 RADLAN Interface Table (C<swIfTable>)
+
+=over
+
+=item $dell->dell_duplex_admin()
+
+(C<swIfDuplexAdminMode>)
+
+=item $dell->dell_duplex()
+
+(C<swIfDuplexOperMode>)
+
+=item $dell->dell_tag_mode()
+
+(C<swIfTaggedMode>)
+
+=item $dell->dell_i_type()
+
+(C<swIfType>)
+
+=item $dell->dell_fc_admin()
+
+(C<swIfFlowControlMode>)
+
+=item $dell->dell_speed_admin()
+
+(C<swIfSpeedAdminMode>)
+
+=item $dell->dell_auto()
+
+(C<swIfSpeedDuplexAutoNegotiation>)
+
+=item $dell->dell_fc()
+
+(C<swIfOperFlowControlMode>)
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $dell->interfaces()
+
+Returns the map between SNMP Interface Identifier (iid) and physical port
+name.  Uses name if available instead of description since descriptions are 
+sometimes not unique.
+
+=item $dell->i_duplex_admin()
+
+Returns reference to hash of iid to current link administrative duplex
+setting.
+
+=item $dell->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses.
+
+Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
+the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
+C<Q-BRIDGE-MIB> doesn't return anything.
+
+=item $dell->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+Some devices don't implement the C<BRIDGE-MIB> forwarding table, so we use
+the C<Q-BRIDGE-MIB> forwarding table.  Fall back to the C<BRIDGE-MIB> if
+C<Q-BRIDGE-MIB> doesn't return anything.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Enterasys.pm

@@ -0,0 +1,427 @@
+# SNMP::Info::Layer3::Enterasys - SNMP Interface to Enterasys devices
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Enterasys;
+
+use strict;
+use Exporter;
+use SNMP::Info::MAU;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Enterasys::ISA = qw/SNMP::Info::MAU SNMP::Info::LLDP
+    SNMP::Info::CDP SNMP::Info::Layer3
+    Exporter/;
+@SNMP::Info::Layer3::Enterasys::EXPORT_OK = qw//;
+
+use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS, %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS, %SNMP::Info::MAU::MIBS,
+    'ENTERASYS-OIDS-MIB' => 'etsysOidDevice',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,   %SNMP::Info::MAU::GLOBALS,
+    'mac' => 'dot1dBaseBridgeAddress',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS, %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,   %SNMP::Info::MAU::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE, %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,   %SNMP::Info::MAU::MUNGE,
+);
+
+sub model {
+    my $enterasys = shift;
+    my $id        = $enterasys->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::Enterasys::model() - Device does not support sysObjectID\n"
+            if $enterasys->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    $model =~ s/^etsysOidDev//i;
+    $model =~ s/^etsysOidPhy//i;
+    return $id unless defined $model;
+
+    return $model;
+}
+
+sub vendor {
+    return 'enterasys';
+}
+
+sub os {
+    return 'enterasys';
+}
+
+sub os_ver {
+    my $enterasys = shift;
+    my $descr     = $enterasys->description();
+    return unless defined $descr;
+
+    if ( $descr =~ m/\bRev ([\d.]*)/ ) {
+        return $1;
+    }
+
+    return;
+}
+
+# Use ifName as it is used for CDP and LLDP.
+sub interfaces {
+    my $enterasys = shift;
+    my $partial   = shift;
+
+    #  We need the original ifName, SUPER:: would give us a method definition
+    #  in a higher class, we could use orig_ but just call the MIB leaf since
+    #  that's what we really want anyway.
+    return $enterasys->ifName($partial)
+        || $enterasys->i_description($partial);
+}
+
+sub i_ignore {
+    my $enterasys = shift;
+    my $partial   = shift;
+
+    my $interfaces = $enterasys->i_type($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+        if ( $interfaces->{$if} =~ /(rs232|tunnel|loopback|\blo\b|null)/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+sub i_duplex {
+    my $enterasys = shift;
+    my $partial   = shift;
+
+    return $enterasys->mau_i_duplex($partial);
+}
+
+sub i_duplex_admin {
+    my $enterasys = shift;
+    my $partial   = shift;
+
+    return $enterasys->mau_i_duplex_admin($partial);
+}
+
+# Normal BRIDGE-MIB has issues on some devices, duplicates and
+# non-increasing oids, Use Q-BRIDGE-MIB for macsuck
+sub fw_mac {
+    my $enterasys = shift;
+    my $partial   = shift;
+
+    return $enterasys->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $enterasys = shift;
+    my $partial   = shift;
+
+    return $enterasys->qb_fw_port($partial);
+}
+
+#  LLDP table timefilter implementation continuously increments when walked
+#  and we may never reach the end of the table.  This behavior can be
+#  modified with the "set snmp timefilter break disable" command,
+#  unfortunately it is not the default.  Query with a partial value of zero
+#  which means no time filter.
+
+sub lldp_ip {
+    my $enterasys = shift;
+    my $partial   = shift || 0;
+
+    return $enterasys->SUPER::lldp_ip($partial);
+}
+
+# [3564920] LLDP-MIB::lldpLocPortDesc isn't always unique,
+# use LLDP-MIB::lldpLocPortId this cross references to ifName
+sub lldp_if {
+    my $lldp    = shift;
+    my $partial = shift || 0;
+
+    my $addr    = $lldp->lldp_rem_pid($partial) || {};
+    my $i_descr = $lldp->ifName() || {};
+    my %r_i_descr = reverse %$i_descr;
+    
+    my %lldp_if;
+    foreach my $key ( keys %$addr ) {
+        my @aOID = split( '\.', $key );
+        my $port = $aOID[1];
+        next unless $port;
+        # Local LLDP port may not equate to ifIndex
+        # Cross reference lldpLocPortId with ifName to get ifIndex
+        my $lldp_desc = $lldp->lldpLocPortId($port);
+        my $desc = $lldp_desc->{$port};
+        # If cross reference is successful use it, otherwise stick with lldpRemLocalPortNum
+        if ( exists $r_i_descr{$desc} ) {
+            $port = $r_i_descr{$desc};
+        }
+        
+        $lldp_if{$key} = $port;
+    }
+    return \%lldp_if;
+}
+
+sub lldp_port {
+    my $enterasys = shift;
+    my $partial   = shift || 0;
+
+    return $enterasys->SUPER::lldp_port($partial);
+}
+
+sub lldp_id {
+    my $enterasys = shift;
+    my $partial   = shift || 0;
+
+    return  $enterasys->SUPER::lldp_id($partial);
+}
+
+sub lldp_platform {
+    my $enterasys = shift;
+    my $partial   = shift || 0;
+
+    return  $enterasys->SUPER::lldp_rem_sysdesc($partial);
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Enterasys - SNMP Interface to Enterasys Network Devices
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $enterasys = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $enterasys->class();
+
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from an 
+Enterasys device through SNMP. 
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $enterasys = new SNMP::Info::Layer3::Enterasys(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::MAU
+
+=item SNMP::Info::LLDP
+
+=item SNMP::Info::CDP
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<ENTERASYS-OIDS-MIB>
+
+=back
+
+=head2 Inherited MIBs
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $enterasys->model()
+
+Returns model type.  Checks $enterasys->id() against the
+F<ENTERASYS-OIDS-MIB>.
+
+=item $enterasys->vendor()
+
+Returns enterasys
+
+=item $enterasys->os()
+
+Returns enterasys
+
+=item $enterasys->os_ver()
+
+Returns os version extracted from C<sysDescr>
+
+=item $enterasys->mac()
+
+Returns base mac
+
+(C<dot1dBaseBridgeAddress>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $enterasys->interfaces()
+
+Mapping between the Interface Table Index (iid) and the physical port name.
+
+=item $enterasys->i_ignore()
+
+Returns reference to hash.  Creates a key for each IID that should be ignored.
+
+Currently looks for rs232, tunnel,loopback,lo,null from
+$enterasys->interfaces()
+
+=item $enterasys->i_duplex()
+
+See documentation for mau_i_duplex() in L<SNMP::Info::MAU/"TABLE METHODS">.
+
+=item $enterasys->i_duplex_admin()
+
+See documentation for mau_i_duplex_admin() in
+L<SNMP::Info::MAU/"TABLE METHODS">.
+
+=item $enterasys->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses.
+
+=item $enterasys->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid).
+
+(C<dot1qTpFdbPort>)
+
+=back
+
+=head2 Link Layer Discovery Protocol (LLDP) Overrides
+
+The LLDP table time filter implementation continuously increments when
+walked and we may never reach the end of the table.  This behavior can be
+modified with the C<"set snmp timefilter break disable"> command,
+unfortunately it is not the default.  These methods are overridden to
+supply a partial value of zero which means no time filter.
+
+=over
+
+=item $enterasys->lldp_if()
+
+=item $enterasys->lldp_ip()
+
+=item $enterasys->lldp_port()
+
+=item $enterasys->lldp_id()
+
+=item $enterasys->lldp_platform()
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/F5.pm

@@ -0,0 +1,416 @@
+# SNMP::Info::Layer3::F5
+#
+# Copyright (c) 2012 Eric Miller
+# All Rights Reserved
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::F5;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::F5::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::F5::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'F5-BIGIP-SYSTEM-MIB' => 'sysAttrArpMaxEntries',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'os_ver'     => 'sysProductVersion',
+    'mkt_name'   => 'sysPlatformInfoMarketingName',
+    'ps1_status' => 'sysChassisPowerSupplyStatus.1',
+    'ps2_status' => 'sysChassisPowerSupplyStatus.2',
+
+    # Named serial1 to override serial1 in L3 serial method
+    'serial1'  => 'sysGeneralChassisSerialNum',
+    'qb_vlans' => 'sysVlanNumber',
+    'ports'    => 'sysInterfaceNumber',
+
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+
+    # sysInterfaceTable
+    'i_index'       => 'sysInterfaceName',
+    'i_description' => 'sysInterfaceName',
+    'i_mtu'         => 'sysInterfaceMtu',
+    'i_speed'       => 'sysInterfaceMediaActiveSpeed',
+    'i_mac'         => 'sysInterfaceMacAddr',
+    'i_up_admin'    => 'sysInterfaceEnabled',
+    'i_up'          => 'sysInterfaceStatus',
+
+    # sysIfxStatTable
+    'i_octet_in'       => 'sysIfxStatHcInOctets',
+    'i_octet_out'      => 'sysIfxStatHcOutOctets',
+    'i_pkts_ucast_in'  => 'sysIfxStatHcInUcastPkts',
+    'i_pkts_ucast_out' => 'sysIfxStatHcOutUcastPkts',
+
+    # sysInterfaceStatTable
+    'i_discards_in'  => 'sysInterfaceStatDropsIn',
+    'i_discards_out' => 'sysInterfaceStatDropsOut',
+    'i_errors_in'    => 'sysInterfaceStatErrorsIn',
+    'i_errors_out'   => 'sysInterfaceStatErrorsOut',
+
+    # sysInterfaceTable
+    'sys_i_duplex' => 'sysInterfaceMediaActiveDuplex',
+
+    # sysChassisFanTable
+    'fan_state' => 'sysChassisFanStatus',
+
+    # sysVlanTable
+    'sys_v_id' => 'sysVlanId',
+    'v_name'   => 'sysVlanVname',
+
+    # sysVlanMemberTable
+    'sys_vm_tagged' => 'sysVlanMemberTagged',
+    'sys_vm_name'   => 'sysVlanMemberVmname',
+    'sys_vmp_name'  => 'sysVlanMemberParentVname',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'f5';
+}
+
+sub os {
+    return 'f5';
+}
+
+sub fan {
+    my $f5        = shift;
+    my $fan_state = $f5->fan_state();
+    my $ret       = "";
+    my $s         = "";
+    foreach my $i ( sort { $a <=> $b } keys %$fan_state ) {
+        $ret .= $s . $i . ": " . $fan_state->{$i};
+        $s = ", ";
+    }
+    return if ( $s eq "" );
+    return $ret;
+}
+
+sub model {
+    my $f5 = shift;
+
+    my $name = $f5->mkt_name();
+
+    if ( defined $name ) { return $name; }
+
+    my $id    = $f5->id();
+    my $model = &SNMP::translateObj($id);
+    if ( !defined $model ) { return $id; }
+
+    return $model;
+}
+
+# Override L3 interfaces
+sub interfaces {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->i_index($partial);
+}
+
+# Override L3 i_name
+sub i_name {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->i_index($partial);
+}
+
+# We don't have this, so fake it
+sub i_type {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $idx = $f5->i_index($partial);
+
+    my %i_type;
+    foreach my $if ( keys %$idx ) {
+
+        $i_type{$if} = 'ethernetCsmacd';
+    }
+    return \%i_type;
+}
+
+# Override L3 i_duplex
+sub i_duplex {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $duplexes = $f5->sys_i_duplex() || {};
+
+    my %i_duplex;
+    foreach my $if ( keys %$duplexes ) {
+        my $duplex = $duplexes->{$if};
+        next unless defined $duplex;
+        next if ( $duplex eq 'none' );
+
+        $i_duplex{$if} = $duplex;
+    }
+    return \%i_duplex;
+}
+
+# Override Bridge v_index
+sub v_index {
+    my $f5      = shift;
+    my $partial = shift;
+
+    return $f5->sys_v_id($partial);
+}
+
+sub i_vlan {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan = {};
+    foreach my $iid ( keys %$tagged ) {
+        my $tag = $tagged->{$iid};
+        next if ( $tag eq 'true' );
+
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        $i_vlan->{$idx} = $vlan;
+    }
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $f5      = shift;
+    my $partial = shift;
+
+    my $index  = $f5->i_index($partial) || {};
+    my $tagged = $f5->sys_vm_tagged()   || {};
+    my $vlans  = $f5->v_index()         || {};
+
+    my $i_vlan_membership = {};
+    foreach my $iid ( keys %$tagged ) {
+
+        # IID is length.vlan name index.length.interface index
+        # Split out and use as the IID to get the VLAN ID and ifIndex
+        my @iid_array = split /\./, $iid;
+        my $len       = $iid_array[0];
+        my $v_idx     = join '.', ( splice @iid_array, 0, $len + 1 );
+        my $idx       = join '.', @iid_array;
+
+        # Check to make sure we can map to a port
+        my $p_idx = $index->{$idx};
+        next unless $p_idx;
+
+        my $vlan = $vlans->{$v_idx};
+        next unless $vlan;
+
+        push( @{ $i_vlan_membership->{$idx} }, $vlan );
+    }
+    return $i_vlan_membership;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::F5 - SNMP Interface to F5 network devices.
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $f5 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $f5->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for F5 network devices.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $f5 = new SNMP::Info::Layer3::F5(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<F5-BIGIP-COMMON-MIB>
+
+=item F<F5-BIGIP-SYSTEM-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $f5->model()
+
+Return (C<sysPlatformInfoMarketingName>), otherwise tries to reference
+$f5->id() to F<F5-BIGIP-COMMON-MIB>. 
+
+=item $f5->vendor()
+
+Returns 'f5'
+
+=item $f5->os()
+
+Returns 'f5'
+
+=item $f5->os_ver()
+
+Returns the software version reported by C<sysProductVersion>
+
+=item $f5->fan()
+
+Combines (C<sysChassisFanStatus>) into a single string.
+
+=item $f5->ps1_status()
+
+Returns status of primary power supply
+
+=item $f5->ps2_status()
+
+Returns status of redundant power supply
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a
+reference to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $f5->interfaces()
+
+Returns reference to the map between IID and physical port.
+
+(C<sysInterfaceName>).
+
+=item $f5->i_duplex()
+
+Returns reference to hash.  Maps port operational duplexes to IIDs.
+
+=item $f5->i_vlan()
+
+Returns a mapping between C<ifIndex> and the default VLAN.
+
+=item $f5->i_vlan_membership()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.
+
+  Example:
+  my $interfaces = $f5->interfaces();
+  my $vlans      = $f5->i_vlan_membership();
+  
+  foreach my $iid (sort keys %$interfaces) {
+    my $port = $interfaces->{$iid};
+    my $vlan = join(',', sort(@{$vlans->{$iid}}));
+    print "Port: $port VLAN: $vlan\n";
+  }
+
+=item $f5->v_index()
+
+Returns VLAN IDs
+
+=item $f5->v_name()
+
+Human-entered name for vlans.
+
+=item $f5->i_name()
+
+Returns the human set port name if exists.
+
+=item $f5->i_type()
+
+Returns C<'ethernetCsmacd'> for each C<ifIndex>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Force10.pm

@@ -0,0 +1,333 @@
+# SNMP::Info::Layer3::Force10
+# $Id$
+#
+# Copyright (c) 2012 William Bulley
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Force10;
+
+use strict;
+use Exporter;
+
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Force10::ISA = qw/SNMP::Info::LLDP SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Force10::EXPORT_OK = qw//;
+
+use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'F10-PRODUCTS-MIB' => 'f10Products',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::Force10::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::Force10::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub vendor {
+    return 'force10';
+}
+
+sub os {
+    return 'ftos';
+}
+
+sub os_ver {
+    my $force10 = shift;
+    my $descr   = $force10->description();
+    my $os_ver  = undef;
+
+    $os_ver = $1 if ( $descr =~ /Force10\s+Application\s+Software\s+Version:\s+(\S+)/s );
+
+    return $os_ver;
+}
+
+sub model {
+    my $force10 = shift;
+    my $id      = $force10->id();
+
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    return $model;
+}
+
+# Use Q-BRIDGE-MIB
+
+sub fw_mac {
+    my $force10 = shift;
+    my $partial = shift;
+
+    return $force10->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $force10 = shift;
+    my $partial = shift;
+
+    return $force10->qb_fw_port($partial);
+}
+
+sub v_name {
+    my $force10 = shift;
+    my $partial = shift;
+
+    return $force10->qb_v_name($partial);
+}
+
+# ------------------- stub for now-----------------
+sub i_vlan {
+    my $force10 = shift;
+    my $partial = shift;
+
+    my $i_vlan = {};
+
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $force10 = shift;
+    my $partial = shift;
+
+    my $index = $force10->bp_index();
+    my $v_index = $force10->v_index();
+
+    my $v_ports  = $force10->qb_v_egress();
+
+    # If given a partial it will be an ifIndex, we need to use dot1dBasePort
+    if ($partial) {
+        my %r_index = reverse %$index;
+        $partial    = $r_index{$partial};
+    }
+
+    my $i_vlan_membership = {};
+
+    foreach my $idx ( sort keys %{$v_ports} ) {
+        next unless ( defined $v_ports->{$idx} );
+        my $portlist = $v_ports->{$idx}; # is an array reference
+        my $ret      = [];
+        my $vlan_ndx = $idx;
+
+        # Convert portlist bit array to bp_index array
+        for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+            push( @{$ret}, $i + 1 ) if ( @$portlist[$i] );
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            my $vlan_tag = $v_index->{$vlan_ndx};
+
+            # FIXME: would be preferable to use
+            # the mapping from Q-BRIDGE-MIB::dot1qVlanFdbId 
+            my $mod = $vlan_tag % 4096;
+
+            push ( @{ $i_vlan_membership->{$ifindex} }, ($mod) );
+        }
+    }
+
+    return $i_vlan_membership;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Force10 - SNMP Interface to Force10 Networks FTOS
+
+=head1 AUTHOR
+
+William Bulley
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $force10 = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $force10->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Force10 Networks FTOS-based devices.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::MAU
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<F10-PRODUCTS-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP:
+
+=over
+
+=item $force10->vendor()
+
+Returns C<'force10'>
+
+=item $force10->model()
+
+Tries to reference $force10->id() to the Force10 product MIB listed above.
+
+=item $force10->os()
+
+Returns C<'ftos'>.
+
+=item $force10->os_ver()
+
+Grabs the operating system version from C<sysDescr>
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $force10->v_name()
+
+Returns the VLAN names.
+
+=item $force10->i_vlan()
+
+Currently not implemented.
+
+=item $force10->i_vlan_membership()
+
+Returns reference to hash of arrays:
+key = C<ifIndex>, value = array of VLAN IDs.
+These are the VLANs which are members of the egress list for the port.
+
+=item $force10->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $force10->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $force10->i_duplex_admin()
+
+Returns info from F<MAU-MIB>
+
+=item $force10->i_speed_admin()
+
+Returns info from F<MAU-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Foundry.pm

@@ -1,140 +1,102 @@
 # SNMP::Info::Layer3::Foundry - SNMP Interface to Foundry devices
-# Max Baker <max@warped.org>
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::Layer3::Foundry;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
-use SNMP::Info;
-use SNMP::Info::Bridge;
+use SNMP::Info::Layer3;
 use SNMP::Info::FDP;
+use SNMP::Info::LLDP;
 
-use vars qw/$VERSION $DEBUG %GLOBALS %FUNCS $INIT %MIBS %MUNGE/;
-
-@SNMP::Info::Layer3::Foundry::ISA = qw/SNMP::Info SNMP::Info::Bridge SNMP::Info::FDP Exporter/;
+@SNMP::Info::Layer3::Foundry::ISA = qw/SNMP::Info::FDP SNMP::Info::LLDP
+    SNMP::Info::Layer3 Exporter/;
 @SNMP::Info::Layer3::Foundry::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
 
-$INIT = 0;
+$VERSION = '3.03';
 
-%MIBS = ( %SNMP::Info::MIBS,
-          %SNMP::Info::Bridge::MIBS,
-          %SNMP::Info::FDP::MIBS,
-          'FOUNDRY-SN-ROOT-MIB' => 'foundry',
-          # IP-FORWARD-MIB
-          # ETHERLIKE-MIB
-          # RFC1398-MIB
-          # RMON-MIB
-          # IF-MIB
-        );
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::FDP::MIBS,
+    'FOUNDRY-SN-ROOT-MIB'         => 'foundry',
+    'FOUNDRY-SN-AGENT-MIB'        => 'snChasPwrSupplyDescription',
+    'FOUNDRY-SN-SWITCH-GROUP-MIB' => 'snSwGroupOperMode',
+);
 
 %GLOBALS = (
-            # Inherit the super class ones
-            %SNMP::Info::GLOBALS,
-            %SNMP::Info::Bridge::GLOBALS,
-            %SNMP::Info::FDP::GLOBALS,
-            'mac'        => 'ifPhysAddress.1',
-            'chassis'    => 'entPhysicalDescr.1',
-            'serial'     => 'snChasSerNum',
-            'temp'       => 'snChasActualTemperature',
-            'ps1_type'   => 'snChasPwrSupplyDescription.1',
-            'ps1_status' => 'snChasPwrSupplyOperStatus.1',
-            'fan'        => 'snChasFanOperStatus.1',
-            #'serial'   => 'enterprises.1991.1.1.1.1.2.0',
-            #'temp'     => 'enterprises.1991.1.1.1.1.18.0',
-            #'ps1_type' => 'enterprises.1991.1.1.1.2.1.1.2.1',
-            #'ps1_status' => 'enterprises.1991.1.1.1.2.1.1.3.1',
-            #'fan'   => 'enterprises.1991.1.1.1.3.1.1.3.1'
-           );
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::FDP::GLOBALS,
+    'mac'        => 'ifPhysAddress.1',
+    'chassis'    => 'entPhysicalDescr.1',
+    'temp'       => 'snChasActualTemperature',
+    'ps1_type'   => 'snChasPwrSupplyDescription.1',
+    'ps1_status' => 'snChasPwrSupplyOperStatus.1',
+    'fan'        => 'snChasFanOperStatus.1',
+    'img_ver'    => 'snAgImgVer',
+    'ch_serial'  => 'snChasSerNum',
 
-%FUNCS   = (
-            %SNMP::Info::FUNCS,
-            %SNMP::Info::Bridge::FUNCS,
-            %SNMP::Info::FDP::FUNCS,
-            'i_name2'    => 'ifName',
-            # From RFC1213-MIB
-            'at_index'    => 'ipNetToMediaIfIndex',
-            'at_paddr'    => 'ipNetToMediaPhysAddress',
-            'at_netaddr'  => 'ipNetToMediaNetAddress',
-            # FOUNDRY-MIB
-            #   snSwPortInfoTable - Switch Port Information Group
-            'sw_index'    => 'snSwPortIfIndex',
-            'sw_duplex'   => 'snSwPortInfoChnMode',
-            'sw_type'     => 'snSwPortInfoMediaType',
-            'sw_speed'    => 'snSwPortInfoSpeed',
-           );
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::FDP::FUNCS,
+
+    # FOUNDRY-SN-SWITCH-GROUP-MIB
+    # snSwPortInfoTable - Switch Port Information Group
+    'sw_index'  => 'snSwPortIfIndex',
+    'sw_duplex' => 'snSwPortInfoChnMode',
+    'sw_type'   => 'snSwPortInfoMediaType',
+    'sw_speed'  => 'snSwPortInfoSpeed',
+);
 
 %MUNGE = (
-            # Inherit all the built in munging
-            %SNMP::Info::MUNGE,
-            %SNMP::Info::Bridge::MUNGE,
-            %SNMP::Info::FDP::MUNGE,
-            'at_paddr' => \&SNMP::Info::munge_mac,
-         );
-
-
-# Method OverRides
-
-# Add our i_aliases if they are set (manually)
-sub i_name {
-    my $foundry = shift;
-    my $i_name = $foundry->i_name2();
-
-    my $i_alias = $foundry->i_alias();
-
-    foreach my $iid (keys %$i_name){
-        my $alias = $i_alias->{$iid};
-        next unless defined $alias;
-        next unless length($alias);
-        $i_name->{$iid} = $i_alias->{$iid};
-    }
-
-    return $i_name;
-}
+    %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::FDP::MUNGE,
+);
 
 sub i_ignore {
     my $foundry = shift;
-    
-    my $interfaces = $foundry->interfaces();
-    my $i_descr    = $foundry->i_descr();
+    my $partial = shift;
+
+    my $interfaces = $foundry->interfaces($partial) || {};
 
     my %i_ignore;
-    foreach my $if (keys %$interfaces) {
-        # lo -> cisco aironet 350 loopback
-        if ($interfaces->{$if} =~ /(tunnel|loopback|lo|lb|null)/i){
+    foreach my $if ( keys %$interfaces ) {
+        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|lb|null)/i ) {
             $i_ignore{$if}++;
         }
     }
@@ -143,12 +105,18 @@ sub i_ignore {
 
 sub i_duplex {
     my $foundry = shift;
-    my $sw_index = $foundry->sw_index();
-    my $sw_duplex= $foundry->sw_duplex();
-    
+    my $partial = shift;
+
+    my $sw_index  = $foundry->sw_index($partial);
+    my $sw_duplex = $foundry->sw_duplex($partial);
+
+    unless ( defined $sw_index and defined $sw_duplex ) {
+        return $foundry->SUPER::i_duplex();
+    }
+
     my %i_duplex;
-    foreach my $sw_port (keys %$sw_duplex){
-        my $iid = $sw_index->{$sw_port};
+    foreach my $sw_port ( keys %$sw_duplex ) {
+        my $iid    = $sw_index->{$sw_port};
         my $duplex = $sw_duplex->{$sw_port};
         next if $duplex =~ /none/i;
         $i_duplex{$iid} = 'half' if $duplex =~ /half/i;
@@ -157,105 +125,162 @@ sub i_duplex {
     return \%i_duplex;
 }
 
-sub i_type {
-    my $foundry = shift;
-    my $sw_index = $foundry->sw_index();
-    my $sw_type= $foundry->sw_type();
-    
-    my %i_type;
-    foreach my $sw_port (keys %$sw_type){
-        my $iid = $sw_index->{$sw_port};
-        my $type = $sw_type->{$sw_port};
-        next unless defined $type;
-        $i_type{$iid} = $type;
-    }
-    return \%i_type;
-}
-
-sub i_speed {
-    my $foundry = shift;
-    my $sw_index = $foundry->sw_index();
-    my $sw_speed= $foundry->sw_speed();
-    
-    my %i_speed;
-    foreach my $sw_port (keys %$sw_speed){
-        my $iid = $sw_index->{$sw_port};
-        my $speed = $sw_speed->{$sw_port};
-        next unless defined $speed;
-        $speed = 'auto'     if $speed =~ /auto/i;
-        $speed = '10 Mbps'  if $speed =~ /s10m/i;
-        $speed = '100 Mbps' if $speed =~ /s100m/i;
-        $speed = '1.0 Gbps' if $speed =~ /s1g/i;
-        $speed = '45 Mbps' if $speed =~ /s45M/i;
-        $speed = '155 Mbps' if $speed =~ /s155M/i;
-        $i_speed{$iid} = $speed;
-    }
-    return \%i_speed;
-}
-
-# $foundry->model() - looks for xxnnnn in the description
 sub model {
     my $foundry = shift;
-    my $id = $foundry->id();
-    my $desc = $foundry->description();
-    my $model = &SNMP::translateObj($id);
+    my $id      = $foundry->id();
+    my $model   = &SNMP::translateObj($id);
 
-    $model = $1 if $desc =~ /\s+([a-z]{2}\d{4})\D/i;
-    
+    # EdgeIron
+    if ( $id =~ /\.1991\.1\.[45]\./ ) {
+
+        my $e_name = $foundry->e_name();
+
+        # Find entity table entry for "unit.1"
+        my $unit_iid = undef;
+        foreach my $e ( keys %$e_name ) {
+            my $name = $e_name->{$e} || '';
+            $unit_iid = $e if $name eq 'unit.1';
+        }
+
+        # Find Model Name
+        my $e_model = $foundry->e_model();
+        if ( defined $e_model->{$unit_iid} ) {
+            return $e_model->{$unit_iid};
+        }
+    }
+
+    return $id unless defined $model;
+
+    $model =~ s/^sn//;
 
     return $model;
 }
 
 sub os {
-    my $foundry = shift;
-    my $descr = $foundry->description();
-    if ($descr =~ m/IronWare/i) {
-        return 'IronWare';
-    }
-
-    return 'foundry';
-}
-sub os_ver {
-    my $foundry = shift;
-    my $os_version = $foundry->os_version();
-    return $os_version if defined $os_version;
-    # Some older ones don't have this value,so we cull it from the description
-    my $descr = $foundry->description();
-    if ($descr =~ m/Version (\d\S*)/) {
-        return $1;
-    }
-    return undef;
-}
-
-
-# $foundry->interfaces() - Map the Interfaces to their physical names
-sub interfaces {
-    my $foundry = shift;
-    my $interfaces = $foundry->i_index();
-    
-    my $descriptions = $foundry->i_description();
-
-    my %ifs = ();
-    foreach my $iid (keys %$interfaces){
-        $ifs{$iid} = $descriptions->{$iid}; 
-    }
-    
-    return \%ifs;
+    return 'brocade';
 }
 
 sub vendor {
-    return 'foundry';
+    return 'brocade';
 }
+
+sub os_ver {
+    my $foundry = shift;
+
+    return $foundry->img_ver() if ( defined $foundry->img_ver() );
+
+    # Some older ones don't have this value,so we cull it from the description
+    my $descr = $foundry->description();
+    if ( $descr =~ m/Version (\d\S*)/ ) {
+        return $1;
+    }
+
+    # EdgeIron
+    my $e_name = $foundry->e_name();
+
+    # find entity table entry for "stackmanaget.1"
+    my $unit_iid = undef;
+    foreach my $e ( keys %$e_name ) {
+        my $name = $e_name->{$e} || '';
+        $unit_iid = $e if $name eq 'stackmanaget.1';
+    }
+
+    if ( defined $unit_iid ) {
+
+        # Find Model Name
+        my $e_fwver = $foundry->e_fwver();
+        if ( defined $e_fwver->{$unit_iid} ) {
+            return $e_fwver->{$unit_iid};
+        }
+    }
+
+    # See if we report from Flash if wouldn't report from running above
+    return $foundry->snAgFlashImgVer() if ( defined $foundry->snAgFlashImgVer() );
+    
+    # Last resort
+    return $foundry->SUPER::os_ver();
+
+}
+
+sub serial {
+    my $foundry = shift;
+
+    # Return chassis serial number if available
+    return $foundry->ch_serial() if ( $foundry->ch_serial() );
+
+    # If no chassis serial use first module serial
+    my $mod_serials = $foundry->snAgentConfigModuleSerialNumber() || {};
+
+    foreach my $mod ( sort keys %$mod_serials ) {
+        my $serial = $mod_serials->{$mod} || '';
+        next unless defined $serial;
+        return $serial;
+    }
+
+    # EdgeIron
+    my $e_name = $foundry->e_name();
+
+    # find entity table entry for "unit.1"
+    my $unit_iid = undef;
+    foreach my $e ( keys %$e_name ) {
+        my $name = $e_name->{$e} || '';
+        $unit_iid = $e if $name eq 'unit.1';
+    }
+
+    if ( defined $unit_iid ) {
+
+        # Look up serial of found entry.
+        my $e_serial = $foundry->e_serial();
+        return $e_serial->{$unit_iid} if defined $e_serial->{$unit_iid};
+    }
+
+    # Last resort
+    return $foundry->SUPER::serial();
+}
+
+sub interfaces {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $i_descr = $foundry->i_description($partial) || {};
+    my $i_name  = $foundry->i_name($partial)        || {};
+
+    # Use ifName for EdgeIrons else use ifDescr
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        $i_descr->{$iid} = $name
+            if $name =~ /^port\d+/i;
+    }
+
+    return $i_descr;
+}
+
+# Reported hangs on a EdgeIron 24G
+sub stp_p_state {
+    my $foundry = shift;
+    my $partial = shift;
+
+    my $descr = $foundry->description();
+    if ( $descr =~ m/\bEdgeIron 24G\b/ ) {
+        return;
+    }
+
+    return $foundry->SUPER::stp_p_state($partial) || {};
+
+}
+
 1;
 __END__
 
 =head1 NAME
 
-SNMP::Info::Layer3::Foundry - Perl5 Interface to Foundry FastIron Network Devices
+SNMP::Info::Layer3::Foundry - SNMP Interface to Brocade (Foundry) Network
+Devices
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -263,26 +288,22 @@ Max Baker (C<max@warped.org>)
  my $foundry = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
-                          # These arguments are passed directly on to SNMP::Session
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 1
                         ) 
     or die "Can't connect to DestHost.\n";
 
- my $class      = $foundry->class();
+ my $class = $foundry->class();
+
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 =head1 DESCRIPTION
 
-This subclass no longer supported.
+Abstraction subclass for Brocade (Foundry) Networks devices.
 
-This module provides limited functionality from older Foundry devices.
-
-Specifically designed for a FI4802.
-
-For speed or debugging purposes you can call the subclass directly, but not after determining
-a more specific class using the method above.  Turn off the AutoSpecify flag.
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above.
 
  my $foundry = new SNMP::Info::Layer3::Foundry(...);
 
@@ -290,9 +311,11 @@ a more specific class using the method above.  Turn off the AutoSpecify flag.
 
 =over
 
-=item SNMP::Info
+=item SNMP::Info::Layer3;
 
-=item SNMP::Info::Bridge
+=item SNMP::Info::FDP;
+
+=item SNMP::Info::LLDP;
 
 =back
 
@@ -300,16 +323,22 @@ a more specific class using the method above.  Turn off the AutoSpecify flag.
 
 =over
 
-=item FOUNDRY-SN-ROOT-MIB
+=item F<FOUNDRY-SN-ROOT-MIB>
+
+=item F<FOUNDRY-SN-AGENT-MIB>
+
+=item F<FOUNDRY-SN-SWITCH-GROUP-MIB>
 
 =item Inherited Classes' MIBs
 
-See classes listed above for their required MIBs.
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::FDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
 
 =back
 
-The Foundry MIBS can be downloaded from www.mibdepot.com and ??
-
 =head1 GLOBALS
 
 These are methods that return scalar value from SNMP
@@ -318,66 +347,88 @@ These are methods that return scalar value from SNMP
 
 =item $foundry->model()
 
-Returns model type.  Checks $foundry->id() against the 
-FOUNDRY-SN-ROOT-MIB and then parses out xxNNNN
+Returns model type.  Checks $foundry->id() against the F<FOUNDRY-SN-ROOT-MIB>
+and removes 'C<sn>'.  EdgeIron models determined through F<ENTITY-MIB>.  
 
 =item $foundry->vendor()
 
-Returns 'foundry' :)
+Returns 'brocade'
+
+=item $foundry->os()
+
+Returns 'brocade'
+
+=item $foundry->os_ver()
+
+Returns the software version
 
 =item $foundry->mac()
 
 Returns MAC Address of root port.
 
-(B<ifPhysAddress.1>)
+(C<ifPhysAddress.1>)
 
 =item $foundry->chassis()
 
 Returns Chassis type.
 
-(B<entPhysicalDescr.1>)
+(C<entPhysicalDescr.1>)
 
 =item $foundry->serial()
 
 Returns serial number of device.
 
-(B<snChasSerNum>)
-
 =item $foundry->temp()
 
 Returns the chassis temperature
 
-(B<snChasActualTemperature>)
+(C<snChasActualTemperature>)
 
 =item $foundry->ps1_type()
 
 Returns the Description for the power supply
 
-(B<snChasPwrSupplyDescription.1>)
+(C<snChasPwrSupplyDescription.1>)
 
 =item $foundry->ps1_status()
 
 Returns the status of the power supply.
 
-(B<snChasPwrSupplyOperStatus.1>)
+(C<snChasPwrSupplyOperStatus.1>)
 
 =item $foundry->fan()
 
 Returns the status of the chassis fan.
 
-(B<snChasFanOperStatus.1>)
+(C<snChasFanOperStatus.1>)
+
+=item $foundry->img_ver()
+
+Returns device image version.
+
+(C<snAgImgVer.0>)
+
+=item $foundry->ch_serial()
+
+Returns chassis serial number.
+
+(C<snChasSerNum.0>)
 
 =back
 
-=head2 Globals imported from SNMP::Info
+=head2 Global Methods imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
 
-=head2 Globals imported from SNMP::Info::Bridge
+=head2 Global Methods imported from SNMP::Info::FDP
 
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::FDP/"GLOBALS"> for details.
 
-=head1 TABLE ENTRIES
+=head2 Global Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
 
 These are methods that return tables of information in the form of a reference
 to a hash.
@@ -390,13 +441,6 @@ to a hash.
 
 Returns reference to hash of interface names to iids.
 
-Uses B<ifDescr>.
-
-=item $foundry->i_name()
-
-Returns reference to hash of interface names.  
-Trys for B<ifAlias> and Defaults to B<ifName>
-
 =item $foundry->i_ignore()
 
 Returns reference to hash of interfaces to be ignored.
@@ -409,46 +453,18 @@ Returns reference to hash of interface link duplex status.
 
 Crosses $foundry->sw_duplex() with $foundry->sw_index()
 
-=item $foundry->i_type()
+=item $foundry->stp_p_state()
 
-Returns reference to hash of interface types.
+"The port's current state as defined by application of the Spanning Tree
+Protocol.
 
-Crosses $foundry->sw_type() with $foundry->sw_index()
+Skipped if device is an EdgeIron 24G due to reports of hangs.
 
-=item $foundry->i_speed()
-
-Returns reference to hash of interface speeds .
-
-Crosses $foundry->sw_speeD() with $foundry->sw_index() and 
-does a little munging.
+(C<dot1dStpPortState>)
 
 =back
 
-=head2 RFC1213 Arp Cache Table (B<ipNetToMediaTable>)
-
-=over
-
-=item $foundry->at_index()
-
-Returns reference to hash.  Maps ARP table entries to Interface IIDs 
-
-(B<ipNetToMediaIfIndex>)
-
-=item $foundry->at_paddr()
-
-Returns reference to hash.  Maps ARP table entries to MAC addresses. 
-
-(B<ipNetToMediaPhysAddress>)
-
-=item $foundry->at_netaddr()
-
-Returns reference to hash.  Maps ARP table entries to IPs 
-
-(B<ipNetToMediaNetAddress>)
-
-=back
-
-=head2 Foundry Switch Port Information Table (B<snSwPortIfTable>)
+=head2 Foundry Switch Port Information Table (C<snSwPortIfTable>)
 
 =over
 
@@ -456,34 +472,38 @@ Returns reference to hash.  Maps ARP table entries to IPs
 
 Returns reference to hash.  Maps Table to Interface IID. 
 
-(B<snSwPortIfIndex>)
+(C<snSwPortIfIndex>)
 
 =item $foundry->sw_duplex()
 
 Returns reference to hash.   Current duplex status for switch ports. 
 
-(B<snSwPortInfoChnMode>)
+(C<snSwPortInfoChnMode>)
 
 =item $foundry->sw_type()
 
 Returns reference to hash.  Current Port Type .
 
-(B<snSwPortInfoMediaType>)
+(C<snSwPortInfoMediaType>)
 
 =item $foundry->sw_speed()
 
 Returns reference to hash.  Current Port Speed. 
 
-(B<snSwPortInfoSpeed>)
+(C<snSwPortInfoSpeed>)
 
 =back
 
-=head2 Table Methods imported from SNMP::Info
+=head2 Table Methods imported from SNMP::Info::Layer3
 
-See documentation in SNMP::Info for details.
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
 
-=head2 Table Methods imported from SNMP::Info::Bridge
+=head2 Table Methods imported from SNMP::Info::FDP
 
-See documentation in SNMP::Info::Bridge for details.
+See documentation in L<SNMP::Info::FDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
 
 =cut

Info/Layer3/H3C.pm

@@ -0,0 +1,256 @@
+# SNMP::Info::Layer3::H3C
+#
+# Copyright (c) 2012 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::H3C;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::H3C::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::H3C::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'HH3C-LswDEVM-MIB'     => 'hh3cDevMFanStatus',
+    'HH3C-LswINF-MIB'      => 'hh3cSlotPortMax',
+    'HH3C-LSW-DEV-ADM-MIB' => 'hh3cLswSysVersion',
+    'HH3C-PRODUCT-ID-MIB'  => 'hh3c-s5500-28C-EI',
+    'HH3C-ENTITY-VENDORTYPE-OID-MIB' => 'hh3cevtOther',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'fan' => 'hh3cDevMFanStatus.1',
+    'ps1_status' => 'hh3cDevMPowerStatus.1',
+    'ps2_status' => 'hh3cDevMPowerStatus.2',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    i_duplex_admin => 'hh3cifEthernetDuplex',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    my $h3c = shift;
+    my $mfg = $h3c->entPhysicalMfgName(1) || {};
+    return $mfg->{1};
+}
+
+sub os {
+    my $h3c = shift;
+    my $descr   = $h3c->description();
+
+    return $1 if ( $descr =~ /(\S+)\s+Platform Software/ );
+    return;
+}
+
+sub os_ver {
+    my $h3c = shift;
+    my $descr   = $h3c->description();
+#    my $version = $h3c->hh3cLswSysVersion(); # Don't use, indicates base version only, no release details
+    my $ver_release = $h3c->entPhysicalSoftwareRev(2) || {};
+    my $os_ver  = undef;
+
+    $os_ver = "$1 $2" if ( $descr =~ /Software Version ([^,]+),.*(Release\s\S+)/i );
+
+    return $ver_release->{2} || $os_ver;
+}
+
+sub i_ignore {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+
+        # lo0 etc
+        if ( $interfaces->{$if} =~ /\blo\d*\b/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+# Use Q-BRIDGE-MIB
+
+sub fw_mac {
+    my $l3  = shift;
+    my $partial = shift;
+
+    return $l3->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $l3  = shift;
+    my $partial = shift;
+
+    return $l3->qb_fw_port($partial);
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::H3C - SNMP Interface to L3 Devices, H3C & HP A-series
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $h3c = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $h3c->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for H3C & HP A-series devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<HH3C-LswDEVM-MIB>
+
+=item F<HH3C-LswINF-MIB>
+
+=item F<HH3C-LSW-DEV-ADM-MIB>
+
+=item F<HH3C-PRODUCT-ID-MIB>
+
+=item F<HH3C-ENTITY-VENDORTYPE-OID-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $h3c->vendor()
+
+Returns value for C<entPhysicalMfgName.1>.
+
+=item $h3c->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $h3c->os_ver()
+
+Returns the software version. Either C<entPhysicalSoftwareRev.2> or extracted from 
+C<sysDescr>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $h3c->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback
+
+=item $h3c->fw_mac()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=item $h3c->fw_port()
+
+Use the F<Q-BRIDGE-MIB> instead of F<BRIDGE-MIB>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=cut

Info/Layer3/HP9300.pm

@@ -0,0 +1,414 @@
+# SNMP::Info::Layer3::HP9300 - SNMP Interface to HP Foundry OEM devices
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::HP9300;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::FDP;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::HP9300::ISA = qw/SNMP::Info::FDP SNMP::Info::LLDP
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::HP9300::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::FDP::MIBS,
+    'HP-SN-ROOT-MIB'         => 'hp',
+    'HP-SN-AGENT-MIB'        => 'snChasPwrSupplyDescription',
+    'HP-SN-SWITCH-GROUP-MIB' => 'snSwGroupOperMode',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::FDP::GLOBALS,
+    'mac'        => 'ifPhysAddress.1',
+    'chassis'    => 'entPhysicalDescr.1',
+    'temp'       => 'snChasActualTemperature',
+    'ps1_type'   => 'snChasPwrSupplyDescription.1',
+    'ps1_status' => 'snChasPwrSupplyOperStatus.1',
+    'fan'        => 'snChasFanOperStatus.1',
+
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::FDP::FUNCS,
+
+    # HP-SN-SWITCH-GROUP-MIB
+    # snSwPortInfoTable - Switch Port Information Group
+    # Fully qualify these since FDP class will load
+    # FOUNDRY-SN-SWITCH-GROUP-MIB which contains the same leaf names
+    'sw_index'  => 'HP_SN_SWITCH_GROUP_MIB__snSwPortIfIndex',
+    'sw_duplex' => 'HP_SN_SWITCH_GROUP_MIB__snSwPortInfoChnMode',
+    'sw_type'   => 'HP_SN_SWITCH_GROUP_MIB__snSwPortInfoMediaType',
+    'sw_speed'  => 'HP_SN_SWITCH_GROUP_MIB__snSwPortInfoSpeed',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE, %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::FDP::MUNGE,
+);
+
+sub i_ignore {
+    my $hp9300  = shift;
+    my $partial = shift;
+
+    my $interfaces = $hp9300->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+        if ( $interfaces->{$if} =~ /(tunnel|loopback|\blo\b|lb|null)/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+sub i_duplex {
+    my $hp9300  = shift;
+    my $partial = shift;
+
+    my $sw_index  = $hp9300->sw_index($partial);
+    my $sw_duplex = $hp9300->sw_duplex($partial);
+
+    unless ( defined $sw_index and defined $sw_duplex ) {
+        return $hp9300->SUPER::i_duplex();
+    }
+
+    my %i_duplex;
+    foreach my $sw_port ( keys %$sw_duplex ) {
+        my $iid    = $sw_index->{$sw_port};
+        my $duplex = $sw_duplex->{$sw_port};
+        next if $duplex =~ /none/i;
+        $i_duplex{$iid} = 'half' if $duplex =~ /half/i;
+        $i_duplex{$iid} = 'full' if $duplex =~ /full/i;
+    }
+    return \%i_duplex;
+}
+
+sub model {
+    my $hp9300 = shift;
+    my $id     = $hp9300->id();
+    my $model  = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^hpSwitch//;
+
+    return $model;
+}
+
+sub os {
+    return 'hp';
+}
+
+sub vendor {
+    return 'hp';
+}
+
+sub os_ver {
+    my $hp9300 = shift;
+
+    return $hp9300->snAgImgVer() if ( defined $hp9300->snAgImgVer() );
+
+    # Some older ones don't have this value,so we cull it from the description
+    my $descr = $hp9300->description();
+    if ( $descr =~ m/Version (\d\S*)/ ) {
+        return $1;
+    }
+
+    # Last resort
+    return $hp9300->SUPER::os_ver();
+
+}
+
+sub serial {
+    my $hp9300 = shift;
+
+    # Return chassis serial number if available
+    return $hp9300->snChasSerNum() if ( $hp9300->snChasSerNum() );
+
+    # If no chassis serial use first module serial
+    my $mod_serials = $hp9300->snAgentConfigModuleSerialNumber();
+
+    foreach my $mod ( sort keys %$mod_serials ) {
+        my $serial = $mod_serials->{$mod} || '';
+        next unless defined $serial;
+        return $serial;
+    }
+
+    # Last resort
+    return $hp9300->SUPER::serial();
+}
+
+sub interfaces {
+    my $hp9300  = shift;
+    my $partial = shift;
+
+    my $i_descr = $hp9300->i_description($partial) || {};
+    my $i_name  = $hp9300->i_name($partial)        || {};
+
+    # Use ifName for EdgeIrons else use ifDescr
+    foreach my $iid ( keys %$i_name ) {
+        my $name = $i_name->{$iid};
+        next unless defined $name;
+        $i_descr->{$iid} = $name
+            if $name =~ /^port\d+/i;
+    }
+
+    return $i_descr;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::HP9300 - SNMP Interface to HP Foundry OEM Network Devices
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $hp9300 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $hp9300->class();
+
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for HP network devices which Foundry Networks was the
+Original Equipment Manufacturer (OEM) such as the HP ProCurve 9300 series.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above.
+
+ my $hp9300 = new SNMP::Info::Layer3::HP9300(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3;
+
+=item SNMP::Info::FDP;
+
+=item SNMP::Info::LLDP;
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<HP-SN-ROOT-MIB>
+
+=item F<HP-SN-AGENT-MIB>
+
+=item F<HP-SN-SWITCH-GROUP-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::FDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $hp9300->model()
+
+Returns model type.  Checks $hp9300->id() against the F<HP-SN-ROOT-MIB>
+and removes C<hpSwitch>.
+
+=item $hp9300->vendor()
+
+Returns 'hp'
+
+=item $hp9300->os()
+
+Returns 'hp'
+
+=item $hp9300->os_ver()
+
+Returns the software version
+
+=item $hp9300->mac()
+
+Returns MAC Address of root port.
+
+(C<ifPhysAddress.1>)
+
+=item $hp9300->chassis()
+
+Returns Chassis type.
+
+(C<entPhysicalDescr.1>)
+
+=item $hp9300->serial()
+
+Returns serial number of device.
+
+=item $hp9300->temp()
+
+Returns the chassis temperature
+
+(C<snChasActualTemperature>)
+
+=item $hp9300->ps1_type()
+
+Returns the Description for the power supply
+
+(C<snChasPwrSupplyDescription.1>)
+
+=item $hp9300->ps1_status()
+
+Returns the status of the power supply.
+
+(C<snChasPwrSupplyOperStatus.1>)
+
+=item $hp9300->fan()
+
+Returns the status of the chassis fan.
+
+(C<snChasFanOperStatus.1>)
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::FDP
+
+See documentation in L<SNMP::Info::FDP/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $hp9300->interfaces()
+
+Returns reference to hash of interface names to iids.
+
+=item $hp9300->i_ignore()
+
+Returns reference to hash of interfaces to be ignored.
+
+Ignores interfaces with descriptions of  tunnel,loopback,null 
+
+=item $hp9300->i_duplex()
+
+Returns reference to hash of interface link duplex status. 
+
+Crosses $hp9300->sw_duplex() with $hp9300->sw_index()
+
+=back
+
+=head2 Switch Port Information Table (C<snSwPortIfTable>)
+
+=over
+
+=item $hp9300->sw_index()
+
+Returns reference to hash.  Maps Table to Interface IID. 
+
+(C<snSwPortIfIndex>)
+
+=item $hp9300->sw_duplex()
+
+Returns reference to hash.   Current duplex status for switch ports. 
+
+(C<snSwPortInfoChnMode>)
+
+=item $hp9300->sw_type()
+
+Returns reference to hash.  Current Port Type .
+
+(C<snSwPortInfoMediaType>)
+
+=item $hp9300->sw_speed()
+
+Returns reference to hash.  Current Port Speed. 
+
+(C<snSwPortInfoSpeed>)
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::FDP
+
+See documentation in L<SNMP::Info::FDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Juniper.pm

@@ -0,0 +1,765 @@
+# SNMP::Info::Layer3::Juniper
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Juniper;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Juniper::ISA       = qw/SNMP::Info::Layer3 SNMP::Info::LLDP  Exporter/;
+@SNMP::Info::Layer3::Juniper::EXPORT_OK = qw//;
+
+use vars qw/$VERSION $DEBUG %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'JUNIPER-CHASSIS-DEFINES-MIB' => 'jnxChassisDefines',
+    'JUNIPER-MIB'                 => 'jnxBoxAnatomy',
+    'JUNIPER-VIRTUALCHASSIS-MIB'  => 'jnxVirtualChassisMemberTable',
+    'JUNIPER-VLAN-MIB'            => 'jnxVlanMIBObjects',
+);
+
+%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, 
+	     %SNMP::Info::LLDP::GLOBALS,
+	     'serial'    => 'jnxBoxSerialNo.0',
+	     'mac'       => 'dot1dBaseBridgeAddress',
+	     'box_descr' => 'jnxBoxDescr'
+	     );
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, 
+	   %SNMP::Info::LLDP::FUNCS,
+	   
+	   # JUNIPER-VLAN-MIB::jnxExVlanTable
+	   'v_index'    => 'jnxExVlanTag',
+	   'v_type'     => 'jnxExVlanType',
+	   'v_name'     => 'jnxExVlanName',
+	   
+	   # JUNIPER-VLAN-MIB::jnxExVlanPortGroupTable
+	   'i_trunk'    => 'jnxExVlanPortAccessMode',
+	   
+	   # JUNPIER-MIB
+           'e_contents_type'   => 'jnxContentsType',
+           'e_containers_type' => 'jnxContainersType',
+           'e_hwver'           => 'jnxContentsRevision',
+);
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, 
+	   %SNMP::Info::LLDP::MUNGE,
+	   'e_containers_type' => \&SNMP::Info::munge_e_type,
+	   'e_contents_type' => \&SNMP::Info::munge_e_type,
+);
+
+sub vendor {
+    return 'juniper';
+}
+
+sub os {
+    return 'junos';
+}
+
+sub os_ver {
+    my $juniper = shift;
+
+    my $descr        = $juniper->description() || '';
+    my $lldp_descr   = $juniper->lldp_sysdesc() || '';
+
+    if ( $descr =~ m/kernel JUNOS (\S+)/ ) {
+        return $1;
+    }
+    elsif ( $lldp_descr =~ m/version\s(\S+)\s/ ) {
+	return $1;
+    }
+    return;
+}
+
+sub model {
+    my $l3 = shift;
+    my $id = $l3->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::Juniper::model() - Device does not support sysObjectID\n"
+            if $l3->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^jnxProductName//i;
+    return $model;
+}
+
+# Override the fancy Layer3.pm serial function
+sub serial {
+    my $juniper = shift;
+    return $juniper->orig_serial();
+}
+
+# 'i_trunk'    => 'jnxExVlanPortAccessMode',
+sub i_trunk {
+    my $juniper = shift;
+    my $partial = shift;
+
+    my $access  = $juniper->jnxExVlanPortAccessMode($partial);
+
+    my %i_trunk;
+
+    foreach (keys %$access)
+    {
+	my $old_key = $_;
+	m/^\d+\.(\d+)$/o;
+	my $new_key = $1;
+	$i_trunk{$new_key} = $access->{$old_key};
+    }
+
+    return \%i_trunk;
+}
+
+# 'v_type'     => 'jnxExVlanType',
+sub v_type {
+    my $juniper = shift;
+    my $partial = shift;
+
+    my $v_type  = $juniper->jnxExVlanType($partial);
+
+    return $v_type;
+}
+
+# 'v_index'    => 'jnxExVlanTag',
+sub v_index {
+    my ($juniper) = shift;
+    my ($partial) = shift;
+
+    my ($v_index)  = $juniper->jnxExVlanTag($partial);
+
+    return $v_index;
+}
+
+sub i_vlan {
+    my $juniper = shift;
+    my $partial = shift;
+
+    my $index = $juniper->bp_index();
+
+    # If given a partial it will be an ifIndex, we need to use dot1dBasePort
+    if ($partial) {
+        my %r_index = reverse %$index;
+        $partial = $r_index{$partial};
+    }
+
+    my $v_index  = $juniper->jnxExVlanTag();
+    my $i_pvid   = $juniper->qb_i_vlan($partial) || {};
+    my $i_vlan = {};
+
+    foreach my $bport ( keys %$i_pvid ) {
+        my $q_vlan  = $i_pvid->{$bport};
+	my $vlan    = $v_index->{$q_vlan};
+        my $ifindex = $index->{$bport};
+        unless ( defined $ifindex ) {
+            print "  Port $bport has no bp_index mapping. Skipping.\n"
+                if $DEBUG;
+            next;
+        }
+        $i_vlan->{$ifindex} = $vlan;
+    }
+
+    return $i_vlan;
+}
+
+sub i_vlan_membership {
+    my $juniper  = shift;
+    my $partial = shift;
+
+    my $index = $juniper->bp_index();
+    my ($v_index)  = $juniper->jnxExVlanTag($partial);
+
+    my $v_ports = $juniper->qb_v_egress() || {};
+
+    my $i_vlan_membership = {};
+
+    foreach my $idx ( sort keys %$v_ports ) {
+        next unless ( defined $v_ports->{$idx} );
+        my $portlist = $v_ports->{$idx}; # is an array reference
+        my $ret      = [];
+        my $vlan_ndx = $idx;
+
+        # Convert portlist bit array to bp_index array
+        for ( my $i = 0; $i <= $#$portlist; $i++ ) {
+            push( @{$ret}, $i + 1 ) if ( @$portlist[$i] );
+        }
+
+        #Create HoA ifIndex -> VLAN array
+        foreach my $port ( @{$ret} ) {
+            my $ifindex = $index->{$port};
+            next unless ( defined($ifindex) );    # shouldn't happen
+            next if ( defined $partial and $ifindex !~ /^$partial$/ );
+            push ( @{ $i_vlan_membership->{$ifindex} }, $v_index->{$vlan_ndx} );
+        }
+    }
+
+    return $i_vlan_membership;
+}
+
+# Use Q-BRIDGE-MIB for bridge forwarding tables
+sub fw_mac {
+    my $juniper  = shift;
+    my $partial = shift;
+
+    return $juniper->qb_fw_mac($partial);
+}
+
+sub fw_port {
+    my $juniper  = shift;
+    my $partial = shift;
+
+    return $juniper->qb_fw_port($partial);
+}
+
+# Pseudo ENTITY-MIB methods
+
+# This class supports both virtual chassis (stackable) and physical chassis
+# based devices, identify if we have a virtual chassis so that we return
+# appropriate entPhysicalClass and correct ordering
+
+sub _e_is_virtual {
+    my $juniper = shift;
+
+    my $v_test = $juniper->jnxVirtualChassisMemberRole() || {};
+    
+    #If we are functioning as a stack someone should be master
+    foreach my $iid ( keys %$v_test ) {
+	my $role = $v_test->{$iid};
+	return 1 if ($role =~ /master/i);
+    }
+    return 0;
+}
+
+sub _e_virtual_index {
+    my $juniper = shift;
+
+    my $containers = $juniper->jnxContainersWithin() || {};
+    my $members    = $juniper->jnxVirtualChassisMemberRole() || {};
+    
+    my %v_index;
+    foreach my $key (keys %$containers) {
+	foreach my $member ( keys %$members ) {
+	    # Virtual chassis members start at zero
+	    $member++;
+	    # We will be duplicating and eliminating some keys,
+	    # but this is for the benefit of e_parent()
+	    my $index  = sprintf ("%02d", $key) . sprintf ("%02d", $member) . "0000";
+	    my $iid = "$key\.$member\.0\.0";
+	    $v_index{$iid} = $index;
+	}
+	unless ($containers->{$key}) {
+	    my $index = sprintf ("%02d", $key) . "000000";
+	    $v_index{$key} = $index;
+	}
+    }
+    return \%v_index;
+}
+
+sub e_index {
+    my $juniper = shift;
+
+    my $contents   = $juniper->jnxContentsDescr() || {};
+    my $containers = $juniper->jnxContainersDescr() || {};
+    my $virtuals   = $juniper->_e_virtual_index() || {};
+    my $is_virtual = $juniper->_e_is_virtual();
+
+    # Format into consistent integer format so that numeric sorting works     
+    my %e_index;
+    if ($is_virtual) {
+	foreach my $key ( keys %$virtuals ) {
+	    $e_index{$key} = $virtuals->{$key};
+	}
+    }
+    else {
+	foreach my $key ( keys %$containers ) {
+	    $e_index{$key} = sprintf ("%02d", $key) . "000000";
+	}
+    }
+    foreach my $key ( keys %$contents ) {
+	$e_index{$key} = join( '', map { sprintf "%02d", $_ } split /\./, $key );
+    }
+ 
+    return \%e_index;
+}
+
+sub e_class {
+    my $juniper = shift;
+
+    my $e_index    = $juniper->e_index() || {};
+    my $fru_type   = $juniper->jnxFruType() || {};
+    my $c_type     = $juniper->jnxContainersDescr() || {};
+    my $is_virtual = $juniper->_e_is_virtual();
+
+    my %e_class;
+    foreach my $iid ( keys %$e_index ) {
+	
+	my $type      = $fru_type->{$iid} || 0;
+	my $container = $c_type->{$iid} || 0;
+	
+        if ( $type =~ /power/i  ) {
+            $e_class{$iid} = 'powerSupply';
+        }
+        elsif ( $type =~ /fan/i ) {
+            $e_class{$iid} = 'fan';
+        }
+	elsif ( $type ) {
+	    $e_class{$iid} = 'module';
+	}
+	# Shouldn't get here if we have type which means
+	# we only have container, chassis, and stack left
+        elsif (($container =~ /chassis/i) and (!$is_virtual) ) {
+            $e_class{$iid} = 'chassis';
+        }
+        elsif (($container =~ /chassis/i) and ($is_virtual)) {
+            $e_class{$iid} = 'stack';
+	}
+	# Were calling the second level chassis a container in the case
+	# of a virtual chassis but not sure that it really matters
+        else {
+            $e_class{$iid} = 'container';
+        }
+    }
+    return \%e_class;
+}
+
+sub e_descr {
+    my $juniper = shift;
+
+    my $e_index    = $juniper->e_index() || {};
+    my $box_descr  = $juniper->box_descr;
+    my $contents   = $juniper->jnxContentsDescr() || {};
+    my $containers = $juniper->jnxContainersDescr() || {};
+
+    my %e_descr;
+    foreach my $iid ( keys %$e_index ) {
+	
+	my $content_descr   = $contents->{$iid} || 0;
+	my $container_descr = $containers->{$iid} || 0;
+	
+	if ($content_descr) {
+	    $e_descr{$iid} = $content_descr;
+	}
+	elsif ($container_descr and $container_descr !~ /chassis/) {
+	    $e_descr{$iid} = $container_descr;
+	}
+	elsif ($container_descr and $container_descr =~ /chassis/) {
+	    $e_descr{$iid} = $box_descr;
+	}
+	# We should only be left with virtual entries created in
+	# _e_virtual_index()
+	elsif ($iid =~ /^(\d+)\.(\d+)(\.0)+?/) {
+	    my $descr = $containers->{$1};
+	    $e_descr{$iid} = $descr;
+	}
+	# Anything past here undef
+    }
+    return \%e_descr;
+}
+
+sub e_serial {
+    my $juniper = shift;
+
+    my $e_index    = $juniper->e_index() || {};
+    my $serials    = $juniper->jnxContentsSerialNo() || {};
+    my $e_class    = $juniper->e_class() || {};
+    my $is_virtual = $juniper->_e_is_virtual();
+    my $box_serial = $juniper->serial();
+
+    my %e_serial;
+    foreach my $iid ( keys %$e_index ) {
+	my $serial = $serials->{$iid} || '';
+	my $class  = $e_class->{$iid} || '';
+	# Chassis serial number is seperate on true chassis
+	# Virtual chassis (stack) report master switch serial
+	if (!$is_virtual and ($class =~ /chassis/i)){
+	    $e_serial{$iid} = $box_serial;
+	}
+	elsif (($serial !~ /^\w/) or ($serial =~ /builtin/i)) {
+	    next;
+	}
+	else {
+	    $e_serial{$iid} = $serial;
+	}
+    }
+    return  \%e_serial;
+}
+
+sub e_fru {
+    my $juniper = shift;
+
+    my $e_index = $juniper->e_index() || {};
+    my $frus    = $juniper->jnxContentsPartNo() || {};
+
+    my %e_fru;
+    foreach my $iid ( keys %$e_index ) {
+	my $fru = $frus->{$iid} || '';
+	if ( ($fru !~ /^\w/) or ($fru =~ /builtin/i)) {
+	    $e_fru{$iid} = "false";
+	}
+	else {
+	    $e_fru{$iid} = "true";
+	}
+    }
+    return  \%e_fru;
+}
+
+sub e_type {
+    my $juniper = shift;
+
+    my $e_index    = $juniper->e_index() || {};
+    my $contents   = $juniper->e_contents_type() || {};
+    my $containers = $juniper->e_containers_type() || {};
+
+    my %e_type;
+    foreach my $iid ( keys %$e_index ) {
+	
+	my $content_type   = $contents->{$iid} || 0;
+	my $container_type = $containers->{$iid} || 0;
+	
+	if ($content_type) {
+	    $content_type =~ s/\.0//;
+	    $e_type{$iid} = $content_type;
+	}
+	elsif ($container_type) {
+	    $container_type =~ s/\.0//;
+	    $e_type{$iid} = $container_type;
+	}
+	# We should only be left with virtual entries created in
+	# _e_virtual_index()
+	elsif ($iid =~ /^(\d+)\.(\d+)(\.0)+?/) {
+	    my $descr = $containers->{$1};
+	    $descr =~ s/\.0//;
+	    $e_type{$iid} = $descr;
+	}
+	# Anything past here undef
+    }
+    return \%e_type;
+}
+
+sub e_vendor {
+    my $juniper = shift;
+
+    my $e_idx = $juniper->e_index() || {};
+
+    my %e_vendor;
+    foreach my $iid ( keys %$e_idx ) {
+        $e_vendor{$iid} = 'juniper';
+    }
+    return \%e_vendor;
+}
+
+sub e_pos {
+    my $juniper = shift;
+
+    # We could look at index levels, but his will work as well
+    return $juniper->e_index();
+}
+
+sub e_parent {
+    my $juniper = shift;
+
+    my $e_idx      = $juniper->e_index() || {};
+    my $c_within   = $juniper->jnxContainersWithin() || {};
+    my $e_descr    = $juniper->e_descr() || {};
+    my $is_virtual = $juniper->_e_is_virtual();
+    
+    my %e_parent;
+    foreach my $iid ( keys %$e_idx ) {
+        next unless $iid;
+	
+	my ($idx, $l1,$l2, $l3) = split /\./, $iid;
+	my $within = $c_within->{$idx};
+	my $descr  = $e_descr->{$iid};
+	
+        if ( !$is_virtual and ($iid =~ /^(\d+)\.\d+/) ) {
+            $e_parent{$iid} = sprintf ("%02d", $1) . "000000";
+        }
+	elsif ( $is_virtual and ($descr =~ /chassis/i) and ($iid =~ /^(\d+)\.(\d+)(\.0)+?/) ) {
+	    $e_parent{$iid} = sprintf ("%02d", $1) . "000000";
+	}
+	elsif ( $is_virtual and ($iid =~ /^(\d+)\.(\d+)(\.0)+?/) ) {
+	    $e_parent{$iid} = sprintf ("%02d", $within) . sprintf ("%02d", $2) . "0000";
+	}
+	elsif ( $is_virtual and ($iid =~ /^(\d+)\.(\d+)\.[1-9]+/) ) {
+	    $e_parent{$iid} = sprintf ("%02d", $1) . sprintf ("%02d", $2) . "0000";
+	}
+	elsif ( defined $within and $iid =~ /\d+/ ) {
+            $e_parent{$iid} = sprintf ("%02d", $within) . "000000";
+	}
+        else {
+            next;
+        }
+    }
+    return \%e_parent;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Juniper - SNMP Interface to L3 Juniper Devices
+
+=head1 AUTHOR
+
+Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $juniper = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $juniper->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Juniper Devices running JUNOS
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<JUNIPER-VLAN-MIB> dated "200901090000Z" or later.
+
+=item F<JUNIPER-CHASSIS-DEFINES-MIB>
+
+=item F<JUNIPER-MIB>
+
+=item F<JUNIPER-VIRTUALCHASSIS-MIB>
+
+=back
+
+=head2 Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $juniper->vendor()
+
+Returns 'juniper'
+
+=item $juniper->os()
+
+Returns 'junos'
+
+=item $juniper->os_ver()
+
+Returns the software version extracted first from C<sysDescr> or
+C<lldpLocSysDesc> if not available in C<sysDescr>.
+
+=item $juniper->model()
+
+Returns the model from C<sysObjectID>, with C<jnxProductName> removed from the
+beginning.
+
+=item $juniper->serial()
+
+Returns serial number
+
+(C<jnxBoxSerialNo.0>)
+
+=item $juniper->mac()
+
+Returns the MAC address used by this bridge when it must be referred
+to in a unique fashion.
+
+(C<dot1dBaseBridgeAddress>)
+
+=item $juniper->box_descr()
+
+The name, model, or detailed description of the device.
+
+(C<jnxBoxDescr.0>)
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $juniper->v_index()
+
+(C<jnxExVlanTag>)
+
+=item $juniper->v_name()
+
+(C<jnxExVlanName>)
+
+=item $juniper->v_type()
+
+(C<jnxExVlanType>)
+
+=item $juniper->i_trunk()
+
+(C<jnxExVlanPortAccessMode>)
+
+=item $juniper->i_vlan()
+
+Returns a mapping between C<ifIndex> and the PVID or default VLAN.
+
+=item $juniper->i_vlan_membership()
+
+Returns reference to hash of arrays: key = C<ifIndex>, value = array of VLAN
+IDs.  These are the VLANs which are members of the egress list for the port.
+
+=back
+
+=head2 Forwarding Table (C<dot1dTpFdbEntry>)
+
+=over 
+
+=item $juniper->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses
+
+(C<dot1dTpFdbAddress>)
+
+=item $juniper->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (iid)
+
+(C<dot1dTpFdbPort>)
+
+=back 
+
+=head2 Pseudo F<ENTITY-MIB> information
+
+These methods emulate F<ENTITY-MIB> Physical Table methods using
+F<JUNIPER-MIB> and F<JUNIPER-VIRTUALCHASSIS-MIB>. 
+
+=over
+
+=item $juniper->e_index()
+
+Returns reference to hash.  Key: IID, Value: Integer, Indices are combined
+into a eight digit integer, each index is two digits padded with leading zero
+if required.
+
+=item $juniper->e_class()
+
+Returns reference to hash.  Key: IID, Value: General hardware type.
+
+=item $juniper->e_descr()
+
+Returns reference to hash.  Key: IID, Value: Human friendly name
+
+=item $juniper->e_hwver()
+
+Returns reference to hash.  Key: IID, Value: Hardware version
+
+=item $juniper->e_vendor()
+
+Returns reference to hash.  Key: IID, Value: juniper
+
+=item $juniper->e_serial()
+
+Returns reference to hash.  Key: IID, Value: Serial number
+
+=item $juniper->e_pos()
+
+Returns reference to hash.  Key: IID, Value: The relative position among all
+entities sharing the same parent.
+
+=item $juniper->e_type()
+
+Returns reference to hash.  Key: IID, Value: Type of component/sub-component
+as defined in F<JUNIPER-CHASSIS-DEFINES-MIB>.
+
+=item $juniper->e_parent()
+
+Returns reference to hash.  Key: IID, Value: The value of e_index() for the
+entity which 'contains' this entity.  A value of zero indicates	this entity
+is not contained in any other entity.
+
+=item $entity->e_fru()
+
+BOOLEAN. Is a Field Replaceable unit?
+
+(C<entPhysicalFRU>)
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Lantronix.pm

@@ -0,0 +1,271 @@
+# SNMP::Info::Layer3::Lantronix
+# $Id$
+#
+# Copyright (c) 2012 J R Binks
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Lantronix;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Lantronix::ISA = qw/
+    SNMP::Info::Layer3
+    Exporter
+    /;
+@SNMP::Info::Layer3::Lantronix::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'LANTRONIX-MIB'     => 'products',
+    'LANTRONIX-SLC-MIB' => 'slcNetwork',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'slc_os_ver'       => 'slcSystemFWRev',
+    'slc_serial'       => 'slcSystemSerialNo',
+    'slc_model'        => 'slcSystemModel',
+    'slc_psu_a_status' => 'slcDevPowerSupplyA',
+    'slc_psu_b_status' => 'slcDevPowerSupplyB',
+);
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+# General notes:
+#
+# Products like the EDS have very minimal MIB support for the basics.
+# Much information has to be derived from sysDescr string.
+#
+sub vendor {
+    return 'lantronix';
+}
+
+sub os {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $os;
+
+    # On EDS, it is called the "Evolution OS"
+    # Not sure what, if any, name it has a name on other products
+    $os = 'EvolutionOS' if ( $descr =~ m/Lantronix EDS\w+ V([\d\.R]+)/ );
+
+    return 'LantronixOS';
+}
+
+sub os_ver {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_os_ver = $device->slc_os_ver;
+    my $os_ver;
+
+    return $slc_os_ver if defined $slc_os_ver;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $os_ver = $1 if ( $descr =~ m/Lantronix EDS\w+ V([\d\.R]+)/ );
+
+    return $os_ver;
+}
+
+sub serial {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_serial = $device->slc_serial;
+    my $serial;
+
+    return $slc_serial if defined $slc_serial;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $serial = $1 if ( $descr =~ m/Lantronix EDS\w+ V[\d\.R]+ \((\w+)\)/ );
+
+    return $serial;
+}       
+
+sub model {
+    my $device = shift;
+    my $descr = $device->description() || '';
+    my $slc_model = $device->slc_model;
+    my $model;
+
+    return $slc_model if defined $slc_model;
+
+    return unless defined $descr;
+
+    # EDS: "Lantronix EDS16PR V4.0.0.0R15 (1307.....X)"
+    $model = $1 if ( $descr =~ m/Lantronix (EDS\w+)/ );
+
+    return $model;
+}
+
+sub ps1_status {
+    my $device = shift;
+    my $slc_psu_a_status = $device->slc_psu_a_status;
+
+    return $slc_psu_a_status if defined $slc_psu_a_status;
+
+    return;
+}
+
+sub ps2_status {
+    my $device = shift;
+    my $slc_psu_b_status = $device->slc_psu_b_status;
+
+    return $slc_psu_b_status if defined $slc_psu_b_status;
+
+    return;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Lantronix - SNMP Interface to Lantronix devices such as terminal servers
+
+=head1 AUTHOR
+
+J R Binks
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $device = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'mydevice',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $device->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Lantronix devices such as terminal servers.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<LANTRONIX-MIB>
+
+=item F<LANTRONIX-SLC-MIB>
+
+=back
+
+=head2 Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP.
+
+=over
+
+=item $device->vendor()
+
+Returns 'lantronix'.
+
+=item $device->os()
+
+Returns 'EvolutionOS' for EDS devices.
+
+=item $device->os_ver()
+
+Returns the software version.
+
+=item $device->model()
+
+Returns the model.
+
+=item $device->serial()
+
+Returns the serial number.
+
+=item $device->ps1_status()
+
+Power supply 1 status
+
+=item $device->ps2_status()
+
+Power supply 2 status
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $device->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+=back
+
+=head2 Lantronix specific items
+
+None at present.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Microsoft.pm

@@ -0,0 +1,196 @@
+# SNMP::Info::Layer3::Microsoft
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Microsoft;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Microsoft::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Microsoft::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( %SNMP::Info::Layer3::MIBS, );
+
+%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, );
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'microsoft';
+}
+
+sub os {
+    return 'windows';
+}
+
+sub os_ver {
+    return '';
+}
+
+sub model {
+    return 'Windows Router';
+}
+
+sub serial {
+    return '';
+}
+
+# $l3->interfaces() - Map the Interfaces to their physical names
+# Add interface number to interface name because if MS Win
+# have identical interface cards ("HP NC7782 Gigabit Server Adapter"
+# for example), than MS Win return identical ifDescr
+sub interfaces {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces   = $l3->i_index($partial);
+    my $descriptions = $l3->i_description($partial);
+
+    my %interfaces = ();
+    foreach my $iid ( keys %$interfaces ) {
+        my $desc = $descriptions->{$iid};
+        next unless defined $desc;
+
+        $interfaces{$iid} = sprintf( "(%U) %s", $iid, $desc );
+    }
+
+    return \%interfaces;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Microsoft - SNMP Interface to L3 Microsoft Windows router
+
+=head1 AUTHOR
+
+begemot
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $router = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $router->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Generic Microsoft Routers running Microsoft Windows OS
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $router->vendor()
+
+Returns C<'microsoft'>
+
+=item $router->os()
+
+Returns C<'windows'>
+
+=item $router->os_ver()
+
+Returns ''
+
+=item $router->model()
+
+Returns C<'Windows Router'>
+
+=item $router->serial()
+
+Returns ''
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $router->interfaces()
+
+Map the Interfaces to their physical names.  Adds interface number to
+interface name because identical interface cards return identical C<ifDescr>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Mikrotik.pm

@@ -0,0 +1,175 @@
+# SNMP::Info::Layer3::Mikrotik
+# $Id$
+#
+# Copyright (c) 2011 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Mikrotik;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Mikrotik::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Mikrotik::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'HOST-RESOURCES-MIB'       => 'hrSystem',
+    'MIKROTIK-MIB'             => 'mtxrLicVersion',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'hrSystemUptime' => 'hrSystemUptime',
+    'os_ver'         => 'mtxrLicVersion',
+);
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'mikrotik';
+}
+
+sub model {
+    my $mikrotik = shift;
+    my $descr = $mikrotik->description() || '';
+    my $model = undef;
+    $model = $1 if ( $descr =~ /^RouterOS\s+(\S+)$/i );
+    return $model;
+}
+
+sub os {
+    return 'routeros';
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Mikrotik - SNMP Interface to Mikrotik devices
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+initial version based on SNMP::Info::Layer3::NetSNMP by Bradley Baetz and Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $mikrotik = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $mikrotik->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Mikrotik devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<HOST-RESOURCES-MIB>
+
+=item F<MIKROTIK-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $mikrotik->vendor()
+
+Returns C<'mikrotik'>.
+
+=item $mikrotik->os()
+
+Returns C<'routeros'>.
+
+=item $mikrotik->model()
+
+Tries to extract the device model from C<sysDescr>.
+
+=item $mikrotik->os_ver()
+
+Returns the value of C<mtxrLicVersion>.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+None.
+
+=over
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+
+=cut

Info/Layer3/N1600.pm

@@ -0,0 +1,319 @@
+# SNMP::Info::Layer3::N1600 - SNMP Interface to Nortel N16XX devices
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::N1600;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::SONMP;
+
+@SNMP::Info::Layer3::N1600::ISA
+    = qw/SNMP::Info::Layer3 SNMP::Info::SONMP Exporter/;
+@SNMP::Info::Layer3::N1600::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %FUNCS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::SONMP::MIBS,
+    'SWL2MGMT-MIB' => 'swL2MgmtMIB',
+    'RAPID-CITY'   => 'rapidCity',
+);
+
+%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, %SNMP::Info::SONMP::GLOBALS, );
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::SONMP::FUNCS,
+
+    # SWL2MGMT-MIB
+    # swL2PortInfoTable
+    'n1600_nway_status' => 'swL2PortInfoNwayStatus',
+
+    # swL2PortCtrlTable
+    'n1600_nway_state' => 'swL2PortCtrlNwayState',
+);
+
+%MUNGE = (
+
+    # Inherit all the built in munging
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::SONMP::MUNGE,
+);
+
+# Method OverRides
+
+sub model {
+    my $n1600 = shift;
+    my $id    = $n1600->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::N1600::model() - Device does not support sysObjectID\n"
+            if $n1600->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^rcA//i;
+    return $model;
+}
+
+sub vendor {
+    return 'avaya';
+}
+
+sub os {
+    return 'passport';
+}
+
+sub os_ver {
+    my $n1600 = shift;
+    my $descr = $n1600->description();
+    return unless defined $descr;
+
+    if ( $descr =~ m/(\d+\.\d+\.\d+\.\d+)/ ) {
+        return $1;
+    }
+
+    return;
+}
+
+sub interfaces {
+    my $n1600   = shift;
+    my $partial = shift;
+
+    my $i_index = $n1600->i_index($partial) || {};
+
+    my %if;
+    foreach my $iid ( keys %$i_index ) {
+        my $index = $i_index->{$iid};
+        next unless defined $index;
+
+        my $slotport = "1.$index";
+        $if{$iid} = $slotport;
+    }
+    return \%if;
+}
+
+sub i_duplex {
+    my $n1600   = shift;
+    my $partial = shift;
+
+    my $nway_status = $n1600->n1600_nway_status($partial) || {};
+
+    my %i_duplex;
+    foreach my $iid ( keys %$nway_status ) {
+        my $duplex = $nway_status->{$iid};
+        next unless defined $duplex;
+        next if $duplex =~ /other/i;
+        $i_duplex{$iid} = 'half' if $duplex =~ /half/i;
+        $i_duplex{$iid} = 'full' if $duplex =~ /full/i;
+    }
+    return \%i_duplex;
+}
+
+sub i_duplex_admin {
+    my $n1600   = shift;
+    my $partial = shift;
+
+    my $nway_state = $n1600->n1600_nway_state($partial) || {};
+
+    my %i_duplex;
+    foreach my $iid ( keys %$nway_state ) {
+        my $duplex = $nway_state->{$iid};
+        next unless defined $duplex;
+        next if $duplex =~ /other/i;
+        $i_duplex{$iid} = 'half' if $duplex =~ /half/i;
+        $i_duplex{$iid} = 'full' if $duplex =~ /full/i;
+        $i_duplex{$iid} = 'auto' if $duplex =~ /nway-enabled/i;
+    }
+    return \%i_duplex;
+}
+
+# Required for SNMP::Info::SONMP
+sub index_factor {
+    return 64;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::N1600 - SNMP Interface to Avaya/Nortel 16XX Network
+Devices
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $n1600 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $n1600->class();
+
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from an
+Avaya/Nortel N16XX device through SNMP. 
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $n1600 = new SNMP::Info::Layer3::N1600(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::SONMP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<SWL2MGMT-MIB>
+
+=item F<RAPID-CITY>
+
+=item Inherited Classes' MIBs
+
+See classes listed above for their required MIBs.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $n1600->bulkwalk_no
+
+Return C<1>.  Bulkwalk is currently turned off for this class.
+
+=item $n1600->model()
+
+Returns model type.  Checks $n1600->id() against the 
+F<RAPID-CITY-MIB> and then parses out C<rcA>.
+
+=item $n1600->vendor()
+
+Returns 'avaya'
+
+=item $n1600->os()
+
+Returns 'passport'
+
+=item $n1600->os_ver()
+
+Returns os version extracted from C<sysDescr>.
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item  $n1600->index_factor()
+
+Required by SNMP::Info::SONMP.  Number representing the number of ports
+reserved per slot within the device MIB.
+
+Returns 64 since largest switch has 48 ports.  Since these switches can
+not stack, the only requirement to reserve more than the max number of ports.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::SONMP
+
+See documentation in SNMP::SONMP::Layer3 for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $n1600->interfaces()
+
+Returns reference to hash of interface names to iids.
+
+Places a 1 in front of index number.  This is required for compatibility with
+SNMP::Info::SONMP.
+
+=item $n1600->i_duplex()
+
+Returns reference to hash of interface operational link duplex status. 
+
+=item $n1600->i_duplex_admin()
+
+Returns reference to hash of interface administrative link duplex status. 
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::SONMP
+
+See documentation in L<SNMP::Info::SONMP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/NetSNMP.pm

@@ -0,0 +1,272 @@
+# SNMP::Info::Layer3::NetSNMP
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::NetSNMP;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::NetSNMP::ISA       = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::NetSNMP::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    'UCD-SNMP-MIB'       => 'versionTag',
+    'NET-SNMP-TC'        => 'netSnmpAgentOIDs',
+    'HOST-RESOURCES-MIB' => 'hrSystem',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    'netsnmp_vers'   => 'versionTag',
+    'hrSystemUptime' => 'hrSystemUptime',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    return 'Net-SNMP';
+}
+
+sub os {
+    my $netsnmp = shift;
+    my $descr   = $netsnmp->description();
+
+    return $1 if ( $descr =~ /^(\S+)\s+/ );
+    return;
+}
+
+sub os_ver {
+    my $netsnmp = shift;
+    my $descr   = $netsnmp->description();
+    my $vers    = $netsnmp->netsnmp_vers();
+    my $os_ver  = undef;
+
+    $os_ver = $1 if ( $descr =~ /^\S+\s+\S+\s+(\S+)\s+/ );
+    if ($vers) {
+        $os_ver = "???" unless defined($os_ver);
+        $os_ver .= " / Net-SNMP " . $vers;
+    }
+
+    return $os_ver;
+}
+
+sub serial {
+    return '';
+}
+
+# sysUptime gives us the time since the SNMP daemon has restarted,
+# so return the system uptime since that's probably what the user
+# wants.  (Caution: this could cause trouble if using
+# sysUptime-based discontinuity timers or other TimeStamp
+# objects.
+sub uptime {
+    my $netsnmp = shift;
+    my $uptime;
+
+    $uptime = $netsnmp->hrSystemUptime();
+    return $uptime if defined $uptime;
+
+    return $netsnmp->SUPER::uptime();
+}
+
+sub i_ignore {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+
+        # lo0 etc
+        if ( $interfaces->{$if} =~ /\blo\d*\b/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::NetSNMP - SNMP Interface to L3 Net-SNMP Devices
+
+=head1 AUTHORS
+
+Bradley Baetz and Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $netsnmp = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $netsnmp->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Generic Net-SNMP devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<UCD-SNMP-MIB>
+
+=item F<NET-SNMP-TC>
+
+=item F<HOST-RESOURCES-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $netsnmp->vendor()
+
+Returns 'Net-SNMP'.
+
+=item $netsnmp->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $netsnmp->os_ver()
+
+Returns the software version extracted from C<sysDescr>, along
+with the Net-SNMP version.
+
+=item $netsnmp->uptime()
+
+Returns the system uptime instead of the agent uptime.
+NOTE: discontinuity timers and other Time Stamp based objects
+are based on agent uptime, so use orig_uptime().
+
+=item $netsnmp->serial()
+
+Returns ''.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $netsnmp->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP> for details.
+
+=head1 NOTES
+
+In order to cause SNMP::Info to classify your device into this class, it
+may be necessary to put a configuration line into your F<snmpd.conf>
+similar to
+
+  sysobjectid .1.3.6.1.4.1.8072.3.2.N
+
+where N is the object ID for your OS from the C<NET-SNMP-TC> MIB (or
+255 if not listed).  Some Net-SNMP installations default to an
+incorrect return value for C<system.sysObjectId>.
+
+In order to recognize a Net-SNMP device as Layer3, it may be necessary
+to put a configuration line similar to
+
+  sysservices 76
+
+in your F<snmpd.conf>.
+
+=cut

Info/Layer3/Netscreen.pm

@@ -0,0 +1,740 @@
+# SNMP::Info::Layer3::Netscreen
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Netscreen;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+use SNMP::Info::IEEE802dot11;
+
+@SNMP::Info::Layer3::Netscreen::ISA
+    = qw/SNMP::Info::Layer3 SNMP::Info::IEEE802dot11 Exporter/;
+@SNMP::Info::Layer3::Netscreen::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::IEEE802dot11::MIBS,
+    'NETSCREEN-SMI'           => 'netscreenSetting',
+    'NETSCREEN-PRODUCTS-MIB'  => 'netscreenGeneric',
+    'NETSCREEN-INTERFACE-MIB' => 'nsIfIndex',
+    'NETSCREEN-SET-GEN-MIB'   => 'nsSetGenSwVer',
+    'NETSCREEN-IP-ARP-MIB'    => 'nsIpArpAOD',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::IEEE802dot11::GLOBALS,
+    'os_version' => 'nsSetGenSwVer',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::IEEE802dot11::FUNCS,
+
+    ns_i_index       => 'nsIfIndex',
+    ns_i_name        => 'nsIfName',
+    ns_i_description => 'nsIfDescr',
+    ns_i_mac         => 'nsIfMAC',
+    ns_i_up          => 'nsIfStatus',
+    ns_ip_table      => 'nsIfIp',
+    ns_ip_netmask    => 'nsIfNetmask',
+    at_index         => 'nsIpArpIfIdx',
+    at_paddr         => 'nsIpArpMac',
+    at_netaddr       => 'nsIpArpIp',
+    bp_index         => 'nsIfInfo',
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::IEEE802dot11::MUNGE,
+    'ns_i_mac' => \&SNMP::Info::munge_mac,
+    'at_paddr' => \&SNMP::Info::munge_mac,
+);
+
+sub layers {
+    return '01001110';
+}
+
+sub vendor {
+    return 'juniper';
+}
+
+sub os {
+    return 'screenos';
+}
+
+sub os_ver {
+    my $netscreen = shift;
+
+    my $descr = $netscreen->description();
+    if ( $descr =~ m/version (\d\S*) \(SN: / ) {
+        return $1;
+    }
+    return;
+}
+
+sub serial {
+    my $netscreen = shift;
+
+    my $e_serial = $netscreen->e_serial() || {};
+
+    my $serial = $e_serial->{1} || undef;
+
+    return $1 if ( defined $serial and $serial =~ /(\d+)/ );
+    my $descr = $netscreen->description();
+    if ( $descr =~ m/version .*\(SN: (\d\S*),/ ) {
+        return $1;
+    }
+    return;
+}
+
+sub model {
+    my $netscreen = shift;
+
+    my $id = $netscreen->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::model() - Device does not support sysObjectID\n"
+            if $netscreen->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^netscreen//i;
+    return $model;
+}
+
+# provides mapping from IF-MIB to nsIf interfaces - many to 1 (!)
+# - on WLAN devices wireless0/0(|-[ag]) -> wireless0/0 !!
+sub _if_nsif_map {
+    my $netscreen   = shift;
+    my $i_descr     = $netscreen->SUPER::i_description;
+    my $ns_descr    = $netscreen->i_description;
+    my %if_nsif_map = ();
+    my @ikeys       = sort { $a <=> $b } keys %$i_descr;
+    my @nskeys      = sort { $a <=> $b } keys %$ns_descr;
+    my $i           = 0;
+    my $n           = 0;
+
+    # assumes descriptions are in the same order from both walks
+    while ( $i < @ikeys && $n < @nskeys ) {
+
+        # find matching sub interfaces
+        while (
+            $i < @ikeys
+            && substr(
+                $i_descr->{ $ikeys[$i] },
+                0,
+                length $ns_descr->{ $nskeys[$n] }
+            ) eq $ns_descr->{ $nskeys[$n] }
+            )
+        {
+
+            $if_nsif_map{ $ikeys[$i] } = $nskeys[$n];
+            $i++;
+        }
+
+        $n++;
+
+        # skip non-matching interfaces (e.g. tunnel.N)
+        while (
+            $i < @ikeys
+            && substr(
+                $i_descr->{ $ikeys[$i] },
+                0,
+                length $ns_descr->{ $nskeys[$n] }
+            ) ne $ns_descr->{ $nskeys[$n] }
+            && $n < @nskeys
+            )
+        {
+
+            $if_nsif_map{ $ikeys[$i] } = 0;    # no matching interface
+            $i++;
+        }
+    }
+
+    return \%if_nsif_map;
+}
+
+# Provides mapping from nsIf interfaces to IF-MIB interfaces - many to 1
+# Example, tunnel.# interfaces are not present in IF-MIB.  There exist no
+# mapping of index IID's between the tables so create mapping based on names
+sub _nsif_if_map {
+    my $netscreen = shift;
+
+    my $i_descr      = $netscreen->SUPER::i_description;
+    my $ns_descr     = $netscreen->i_description;
+    my %rev_i_descr  = reverse %$i_descr;
+    my %rev_ns_descr = reverse %$ns_descr;
+
+    my %nsif_if_map = ();
+    foreach my $value ( values %$ns_descr ) {
+        if ( exists $rev_i_descr{$value} ) {
+            $nsif_if_map{ $rev_ns_descr{$value} } = $rev_i_descr{$value};
+        }
+        else {
+            $nsif_if_map{ $rev_ns_descr{$value} } = 0;
+        }
+    }
+    return \%nsif_if_map;
+}
+
+sub interfaces {
+    my $netscreen = shift;
+    return $netscreen->i_description();
+}
+
+sub i_index {
+    my $netscreen = shift;
+    return $netscreen->ns_i_index();
+}
+
+sub i_name {
+    my $netscreen = shift;
+    return $netscreen->ns_i_name();
+}
+
+sub i_description {
+    my $netscreen = shift;
+
+    # Versions prior to 5.4 do not support nsIfDescr but do have nsIfName
+    return $netscreen->ns_i_description() || $netscreen->ns_i_name();
+}
+
+sub i_mac {
+    my $netscreen = shift;
+
+    my $ns_mac   = $netscreen->ns_i_mac()     || {};
+    my $if_i_mac = $netscreen->SUPER::i_mac() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+
+    my %i_mac = ();
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_mac{$iid} = $ns_mac->{$iid} || $if_i_mac->{ $ns_i_map->{$iid} };
+    }
+
+    return \%i_mac;
+}
+
+sub i_lastchange {
+    my $netscreen = shift;
+
+    my $if_i_lastchange = $netscreen->SUPER::i_lastchange() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_lastchange;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_lastchange{$iid} = $if_i_lastchange->{ $ns_i_map->{$iid} };
+    }
+    return \%i_lastchange;
+}
+
+sub i_up {
+    my $netscreen = shift;
+    return $netscreen->ns_i_up();
+}
+
+sub i_up_admin {
+    my $netscreen  = shift;
+    my $i_up       = $netscreen->i_up();
+    my $i_up_admin = $netscreen->SUPER::i_up_admin();
+    my $ns_i_map   = $netscreen->_nsif_if_map();
+    my %i_up_admin;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_up_admin{$iid} 
+            = $i_up->{$iid} eq "up" && "up"
+            || $i_up_admin->{ $ns_i_map->{$iid} }
+            || 0;
+    }
+    return \%i_up_admin;
+}
+
+sub i_type {
+    my $netscreen = shift;
+
+    my $if_i_type = $netscreen->SUPER::i_type() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_type;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_type{$iid} = $if_i_type->{ $ns_i_map->{$iid} } || "tunnel";
+    }
+    return \%i_type;
+}
+
+sub i_mtu {
+    my $netscreen = shift;
+
+    my $i_type = $netscreen->SUPER::i_mtu() || {};
+    my $ns_i_map = $netscreen->_nsif_if_map();
+    my %i_mtu;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_mtu{$iid} = $i_type->{ $ns_i_map->{$iid} };
+    }
+    return \%i_mtu;
+}
+
+sub i_ignore {
+    return;
+}
+
+sub i_speed {
+    my $netscreen = shift;
+
+    my $i_speed  = $netscreen->SUPER::i_speed();
+    my $i_name   = $netscreen->i_name();
+    my $ns_i_map = $netscreen->_nsif_if_map;
+    my %i_speed;
+
+    foreach my $iid ( keys %$ns_i_map ) {
+        $i_speed{$iid} 
+            = $i_speed->{ $ns_i_map->{$iid} }
+            || $i_name->{$iid} =~ /tunnel/ && "vpn"
+            || 0;
+    }
+    return \%i_speed;
+}
+
+sub _mac_map {
+    my $netscreen = shift;
+
+    my $arp_mac = $netscreen->nsIpArpMac() || {};
+
+    my %mac_map = ();
+    foreach my $iid ( keys %$arp_mac ) {
+        my $oid = join( ".", ( unpack( "C6", $arp_mac->{$iid} ) ) );
+        $mac_map{$oid} = $iid;
+    }
+    return \%mac_map;
+}
+
+sub ip_index {
+    my $netscreen = shift;
+
+    my $ns_ip = $netscreen->ns_ip_table() || {};
+
+    my %ip_index = ();
+    foreach my $iid ( keys %$ns_ip ) {
+        $ip_index{ $ns_ip->{$iid} } = $iid if $ns_ip->{$iid} ne "0.0.0.0";
+    }
+    return \%ip_index;
+}
+
+sub ip_table {
+    my $netscreen = shift;
+
+    my $ip_index = $netscreen->ip_index() || {};
+
+    my %ip_table = ();
+    foreach my $iid ( keys %$ip_index ) {
+        $ip_table{$iid} = $iid;
+    }
+    return \%ip_table;
+}
+
+sub ip_netmask {
+    my $netscreen = shift;
+
+    my $ip_index = $netscreen->ip_index() || {};
+    my $ns_netmask = $netscreen->ns_ip_netmask();
+
+    my %ip_netmask = ();
+    foreach my $iid ( keys %$ip_index ) {
+        $ip_netmask{$iid} = $ns_netmask->{ $ip_index->{$iid} };
+    }
+    return \%ip_netmask;
+}
+
+sub fw_index {
+    my $netscreen = shift;
+    my %fw_index  = ();
+    my $arp_mac   = $netscreen->nsIpArpMac() || {};
+
+    foreach my $iid ( keys %$arp_mac ) {
+        my $oid = join( ".", ( unpack( "C6", $arp_mac->{$iid} ) ) );
+        $fw_index{$iid} = $oid;
+    }
+    return \%fw_index;
+}
+
+sub fw_mac {
+    my $netscreen = shift;
+
+    my $mac_map = $netscreen->_mac_map() || {};
+
+    my %fw_mac = ();
+    foreach my $oid ( keys %$mac_map ) {
+        my $mac
+            = join( ":", ( map { sprintf "%lx", $_ } split( /\./, $oid ) ) );
+        $fw_mac{$oid} = $mac;
+    }
+    return \%fw_mac;
+}
+
+sub bp_index {
+    my $netscreen = shift;
+
+    my $if_info = $netscreen->nsIfInfo() || {};
+
+    my %bp_index = ();
+    foreach my $iid ( keys %$if_info ) {
+        $bp_index{ $if_info->{$iid} } = $iid;
+    }
+    return \%bp_index;
+}
+
+sub fw_port {
+    my $netscreen = shift;
+
+    my $fw_index = $netscreen->fw_index();
+    my $arp_if = $netscreen->nsIpArpIfIdx() || {};
+
+    my %fw_port;
+    foreach my $iid ( keys %$arp_if ) {
+        $fw_port{ $fw_index->{$iid} } = $arp_if->{$iid}
+            if defined $fw_index->{$iid};
+    }
+    return \%fw_port;
+}
+
+# need to remap from IF-MIB index to nsIf index
+sub i_ssidlist {
+    my $netscreen = shift;
+
+    my $i_ssidlist = $netscreen->SUPER::i_ssidlist() || {};
+    my $ns_i_map = $netscreen->_if_nsif_map();
+
+    my %i_ssidlist;
+    foreach my $iid ( keys %$i_ssidlist ) {
+        $i_ssidlist{ $ns_i_map->{$iid} } = $i_ssidlist->{$iid};
+    }
+    return \%i_ssidlist;
+}
+
+sub i_80211channel {
+    my $netscreen = shift;
+
+    my $i_80211channel = $netscreen->SUPER::i_80211channel() || {};
+    my $ns_i_map = $netscreen->_if_nsif_map();
+
+    my %i_80211channel;
+    foreach my $iid ( keys %$i_80211channel ) {
+        $i_80211channel{ $ns_i_map->{$iid} } = $i_80211channel->{$iid};
+    }
+    return \%i_80211channel;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Netscreen - SNMP Interface to Juniper Netscreen Devices
+
+=head1 AUTHOR
+
+Kent Hamilton
+
+=head1 SYNOPSIS
+
+    #Let SNMP::Info determine the correct subclass for you.
+
+    my $netscreen = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+
+    or die "Can't connect to DestHost.\n";
+
+    my $class = $netscreen->class();
+    print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+Juniper Netscreen devices through SNMP.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+my $netscreen = new SNMP::Info::Layer3::Netscreen(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::IEEE802dot11
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<NETSCREEN-SMI>
+
+=item F<NETSCREEN-PRODUCTS-MIB>
+
+=item F<NETSCREEN-INTERFACE-MIB>
+
+=item F<NETSCREEN-SET-GEN-MIB>
+
+=item F<NETSCREEN-IP-ARP-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its MIB requirements.
+
+See L<SNMP::Info::IEEE802dot11/"Required MIBs"> for its MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $netscreen->model()
+
+Tries to reference $netscreen->id() to F<NETSCREEN-PRODUCTS-MIB>
+
+=item $netscreen->vendor()
+
+Returns C<'juniper'>
+
+=item $netscreen->os()
+
+Returns C<'screenos'>
+
+=item $netscreen->os_ver()
+
+Extracts the OS version from the description string.
+
+=item $netscreen->serial()
+
+Returns serial number.
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $netscreen->layers()
+
+Returns 01001110.  Device doesn't report layers properly, modified to reflect 
+Layer 2 and 3 functionality.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=head3 Interface Information
+
+=over
+
+=item $netscreen->interfaces()
+
+Creates a map between the interface identifier (iid) and the physical port
+name.
+
+Defaults to C<insIfDescr> if available, uses C<nsIfName> if not.
+
+=item $netscreen->i_description() 
+
+Description of the interface. Uses C<insIfDescr> if available, C<nsIfName>
+if not.
+
+=item $netscreen->i_ignore()
+
+Returns without defining any interfaces to ignore.
+
+=item $netscreen->i_index()
+
+Default SNMP IID to Interface index.
+
+(C<nsIfIndex>)
+
+=item $netscreen->i_lastchange()
+
+The value of C<sysUpTime> when this port last changed states (up,down), 
+maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifLastChange>)
+
+=item $netscreen->i_mac() 
+
+MAC address of the interface.  Note this is just the MAC of the port, not
+anything connected to it.  Uses C<nsIfMAC> if available, C<ifPhysAddress>
+if not.
+
+=item $netscreen->i_mtu()
+
+INTEGER. Interface MTU value, maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifMtu>)
+
+=item $netscreen->i_name()
+
+Interface Name field.
+
+(C<nsIfName>)
+
+=item $netscreen->i_speed()
+
+Speed of the link, maps from C<ifIndex> to C<nsIfIndex>.
+
+=item $netscreen->i_type()
+
+Interface type.  Maps from C<ifIndex> to C<nsIfIndex>.
+
+(C<ifType>)
+
+=item $netscreen->i_up() 
+
+Link Status of the interface.  Typical values are 'up' and 'down'.
+
+(C<nsIfStatus>)
+
+=item $netscreen->i_up_admin()
+
+Administrative status of the port.  Checks both C<ifAdminStatus> and
+C<nsIfStatus>.
+
+=back
+
+=head3 IP Address Table
+
+Each entry in this table is an IP address in use on this device.
+
+=over
+
+=item $netscreen->ip_index()
+
+Maps the IP Table to the IID
+
+=item $netscreen->ip_table()
+
+Maps the Table to the IP address
+
+(C<nsIfIp>)
+
+=item $netscreen->ip_netmask()
+
+Gives netmask setting for IP table entry.
+
+(C<nsIfNetmask>)
+
+=back
+
+=head3 Forwarding Table
+
+Uses C<nsIpArpTable> to emulate the forwarding table.
+
+=over 
+
+=item $netscreen->fw_index()
+
+Maps the Forwarding Table to the IID
+
+=item $netscreen->fw_mac()
+
+Returns reference to hash of forwarding table MAC Addresses.
+
+=item $netscreen->fw_port()
+
+Returns reference to hash of forwarding table entries port interface
+identifier (IID).
+
+=item $netscreen->bp_index()
+
+Returns reference to hash of bridge port table entries map back to interface
+identifier (IID).
+
+=back
+
+=head3 Wireless Information
+
+=over 
+
+=item $dot11->i_ssidlist()
+
+Returns reference to hash.  SSID's recognized by the radio interface.
+Remaps from C<ifIndex> to C<nsIfIndex>.
+
+(C<dot11DesiredSSID>)
+
+=item $dot11->i_80211channel()
+
+Returns reference to hash.  Current operating frequency channel of the radio
+interface.  Remaps from C<ifIndex> to C<nsIfIndex>.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::IEEE802dot11
+
+See L<SNMP::Info::IEEE802dot11/"TABLE METHODS"> for details.
+
+=cut
+

Info/Layer3/Nexus.pm

@@ -0,0 +1,391 @@
+# SNMP::Info::Layer3::Nexus
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Nexus;
+
+use strict;
+use Exporter;
+use SNMP::Info::LLDP;
+use SNMP::Info::CDP;
+use SNMP::Info::CiscoImage;
+use SNMP::Info::CiscoPortSecurity;
+use SNMP::Info::CiscoConfig;
+use SNMP::Info::CiscoPower;
+use SNMP::Info::Layer3;
+use SNMP::Info::CiscoStpExtensions;
+use SNMP::Info::CiscoVTP;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+# NOTE : Top-most items gets precedence for @ISA
+@SNMP::Info::Layer3::Nexus::ISA = qw/
+    SNMP::Info::CiscoVTP 
+    SNMP::Info::CiscoStpExtensions
+    SNMP::Info::LLDP
+    SNMP::Info::CDP 
+    SNMP::Info::CiscoImage
+    SNMP::Info::CiscoPortSecurity
+    SNMP::Info::CiscoConfig
+    SNMP::Info::CiscoPower
+    SNMP::Info::Layer3
+    Exporter
+/;
+
+@SNMP::Info::Layer3::Nexus::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+# NOTE: Order creates precedence
+#       Example: v_name exists in Bridge.pm and CiscoVTP.pm
+#       Bridge is called from Layer3 and CiscoStpExtensions
+#       So we want CiscoVTP to come last to get the right one.
+# The @ISA order should be reverse of these orders.
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::CiscoPower::MIBS,
+    %SNMP::Info::CiscoConfig::MIBS,
+    %SNMP::Info::CiscoPortSecurity::MIBS,
+    %SNMP::Info::CiscoImage::MIBS,
+    %SNMP::Info::CDP::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    %SNMP::Info::CiscoStpExtensions::MIBS, 
+    %SNMP::Info::CiscoVTP::MIBS,
+    'CISCO-ENTITY-VENDORTYPE-OID-MIB' => 'cevMIBObjects',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::CiscoPower::GLOBALS,
+    %SNMP::Info::CiscoConfig::GLOBALS,
+    %SNMP::Info::CiscoPortSecurity::GLOBALS,
+    %SNMP::Info::CiscoImage::GLOBALS,
+    %SNMP::Info::CDP::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+    %SNMP::Info::CiscoStpExtensions::GLOBALS,
+    %SNMP::Info::CiscoVTP::GLOBALS,
+    'mac' => 'dot1dBaseBridgeAddress',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::CiscoPower::FUNCS,
+    %SNMP::Info::CiscoConfig::FUNCS,
+    %SNMP::Info::CiscoPortSecurity::FUNCS,
+    %SNMP::Info::CiscoImage::FUNCS,
+    %SNMP::Info::CDP::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+    %SNMP::Info::CiscoStpExtensions::FUNCS, 
+    %SNMP::Info::CiscoVTP::FUNCS,    
+);
+
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::CiscoPower::MUNGE,
+    %SNMP::Info::CiscoConfig::MUNGE,
+    %SNMP::Info::CiscoPortSecurity::MUNGE,
+    %SNMP::Info::CiscoImage::MUNGE,         
+    %SNMP::Info::CDP::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+    %SNMP::Info::CiscoStpExtensions::MUNGE, 
+    %SNMP::Info::CiscoVTP::MUNGE,    
+);
+
+sub cisco_comm_indexing { return 1; }
+
+sub vendor {
+    return 'cisco';
+}
+
+sub os {
+    return 'nx-os';
+}
+
+sub os_ver {
+    my $nexus = shift; 
+    my $descr = $nexus->description();
+    
+    return $1 if ( $descr =~ /\),\s+Version\s+(.+?),/ );
+    return $descr;
+}
+
+sub serial {
+    my $nexus = shift;
+
+    my $e_class = $nexus->e_class();
+
+    foreach my $iid ( keys %$e_class ) {
+        my $class = $e_class->{$iid} || '';
+        if ($class =~ /chassis/) {
+	    my $serial = $nexus->e_serial($iid);
+	    return $serial->{$iid};
+	}
+    }    
+    return;
+}
+
+# sysObjectID returns an IID to an entry in the CISCO-ENTITY-VENDORTYPE-OID-MIB.
+# Look it up and return it.
+sub model {
+    my $nexus = shift;
+    my $id    = $nexus->id();
+
+    unless ( defined $id ) {
+        print
+            " SNMP::Info::Layer3::Nexus::model() - Device does not support sysObjectID\n"
+            if $nexus->debug();
+        return;
+    }
+
+    my $model = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^cevChassis//i;
+    return $model;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Nexus - SNMP Interface to Cisco Nexus Switches running
+NX-OS
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $nexus = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $nexus->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Abstraction subclass for Cisco Nexus Switches running NX-OS.  
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $nexus = new SNMP::Info::Layer3::Nexus(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::CiscoVTP
+
+=item SNMP::Info::CDP
+
+=item SNMP::Info::CiscoImage
+
+=item SNMP::Info::CiscoPortSecurity
+
+=item SNMP::Info::CiscoConfig
+
+=item SNMP::Info::CiscoPower
+
+=item SNMP::Info::CiscoStpExtensions
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
+
+=back
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoVTP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CDP/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoImage/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPortSecurity/"Required MIBs"> for its own MIB
+requirements.
+
+See L<SNMP::Info::CiscoConfig/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoPower/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::CiscoStpExtensions/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return a scalar value from SNMP
+
+=over
+
+=item $nexus->vendor()
+
+Returns 'cisco'
+
+=item $nexus->os()
+
+Returns C<'nx-os'>
+
+=item $nexus->os_ver()
+
+Returns operating system version extracted from C<sysDescr>.
+
+=item $nexus->serial()
+
+Returns the serial number of the chassis from F<ENTITY-MIB>.
+
+=item $nexus->model()
+
+Tries to reference $nexus->id() to F<CISCO-ENTITY-VENDORTYPE-OID-MIB>
+
+Removes C<'cevChassis'> for readability.
+
+=item $nexus->mac()
+
+C<dot1dBaseBridgeAddress>
+
+=item $nexus->cisco_comm_indexing()
+
+Returns 1.  Use vlan indexing.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"GLOBALS"> for details.
+
+=head2 Globals imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoVTP
+
+See documentation in L<SNMP::Info::CiscoVTP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CDP
+
+See documentation in L<SNMP::Info::CDP/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStats
+
+See documentation in L<SNMP::Info::CiscoStats/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoImage
+
+See documentation in L<SNMP::Info::CiscoImage/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPortSecurity
+
+See documentation in L<SNMP::Info::CiscoPortSecurity/"TABLE METHODS"> for
+details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoConfig
+
+See documentation in L<SNMP::Info::CiscoConfig/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoPower
+
+See documentation in L<SNMP::Info::CiscoPower/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::CiscoStpExtensions
+
+See documentation in L<SNMP::Info::CiscoStpExtensions/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/PacketFront.pm

@@ -0,0 +1,220 @@
+# SNMP::Info::Layer3::PacketFront
+# $Id$
+#
+# Copyright (c) 2011 Jeroen van Ingen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::PacketFront;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::PacketFront::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::PacketFront::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    'UCD-SNMP-MIB'             => 'versionTag',
+    'NET-SNMP-TC'              => 'netSnmpAgentOIDs',
+    'HOST-RESOURCES-MIB'       => 'hrSystem',
+    'PACKETFRONT-PRODUCTS-MIB' => 'drg100',
+    'PACKETFRONT-DRG-MIB'      => 'productName',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'snmpd_vers'     => 'versionTag',
+    'hrSystemUptime' => 'hrSystemUptime',
+);
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'packetfront';
+}
+
+sub os {
+    # Only DRGOS for now (not tested with other product lines than DRG series)
+    my $pfront = shift;
+    my $descr   = $pfront->description();
+    if ( $descr =~ /drgos/i ) {
+        return 'drgos';
+    } else {
+        return;
+    }
+}
+
+sub os_ver {
+    my $pfront = shift;
+    my $descr   = $pfront->description();
+    my $os_ver  = undef;
+
+    if ( $descr =~ /Version:\sdrgos-(\w+)-([\w\-\.]+)/ ) {
+        $os_ver = $2;
+    }
+    return $os_ver;
+}
+
+sub serial {
+    my $pfront = shift;
+    return $pfront->productSerialNo();
+}
+
+sub i_ignore {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+
+        # lo0 etc
+        if ( $interfaces->{$if} =~ /\blo\d*\b/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::PacketFront - SNMP Interface to PacketFront devices
+
+=head1 AUTHORS
+
+Jeroen van Ingen
+initial version based on SNMP::Info::Layer3::NetSNMP by Bradley Baetz and Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $pfront = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $pfront->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for PacketFront devices
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<UCD-SNMP-MIB>
+
+=item F<NET-SNMP-TC>
+
+=item F<HOST-RESOURCES-MIB>
+
+=item F<PACKETFRONT-PRODUCTS-MIB>
+
+=item F<PACKETFRONT-DRG-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $pfront->vendor()
+
+Returns C<'packetfront'>.
+
+=item $pfront->os()
+
+Returns the OS extracted from C<sysDescr>.
+
+=item $pfront->os_ver()
+
+Returns the software version extracted from C<sysDescr>.
+
+=item $pfront->serial()
+
+Returns the value of C<productSerialNo>. 
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $pfront->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3> for details.
+
+
+=cut

Info/Layer3/Pf.pm

@@ -0,0 +1,230 @@
+# SNMP::Info::Layer3::Pf
+# $Id$
+#
+# Copyright (c) 2010 Max Baker
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of Pf Networks, Inc. nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Pf;
+
+use strict;
+use Exporter;
+
+use SNMP::Info::Layer3;
+use SNMP::Info::LLDP;
+
+@SNMP::Info::Layer3::Pf::ISA = qw/SNMP::Info::LLDP SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Pf::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::LLDP::MIBS,
+    # Enterprise container where BEGEMOT-* lives
+    'FOKUS-MIB' => 'fokus',
+    # MIBs used included in Layer3 and above:
+    # UDP-MIB
+    # TCP-MIB
+    # IF-MIB
+    #
+    # Stuff in these MIBs but not used for Netdisco yet for my test device:
+    #
+    #'BEGEMOT-SNMPD-MIB',
+    #'BEGEMOT-PF-MIB',
+    #'BEGEMOT-NETGRAPH-MIB',
+    #'BEGEMOT-MIB2-MIB',
+    #'BEGEMOT-HOSTRES-MIB',
+    # HOST-RESOURCES-MIB
+    # IP-FORWARD-MIB
+    #
+    # Nothing in these MIBs for my test device:
+    #
+    #'BEGEMOT-IP-MIB',
+    #'BEGEMOT-MIB',
+    #'BEGEMOT-BRIDGE-MIB',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::LLDP::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::LLDP::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::LLDP::MUNGE,
+);
+
+sub vendor {
+    return 'FreeBSD';
+}
+
+sub model {
+    my $pf = shift;
+    my $descr   = $pf->description() || '';
+    my $model  = undef;
+    $model = $1 if ( $descr =~ /FreeBSD\s+(\S+)/ );
+    return $model if defined $model;
+    return $pf->os_ver();
+}
+
+sub os {
+    return 'Pf';
+}
+
+sub os_ver {
+    my $pf = shift;
+    my $id = $pf->id();
+
+    my $os_ver = &SNMP::translateObj($id);
+    return $id unless defined $os_ver;
+
+    # From /usr/share/snmp/defs/tree.def on a Pf Machine
+    # (2 begemotSnmpdDefs
+    #   (1 begemotSnmpdAgent
+    #     (1 begemotSnmpdAgentFreeBSD OID op_dummy)
+    # We're leaving the 1.1 and trimming off up to the 2
+    $os_ver =~ s/fokus.1.1.2.//;
+    return $os_ver;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Pf - SNMP Interface to FreeBSD-Based Firewalls using Pf /Pf Sense
+
+=head1 AUTHOR
+
+Max Baker
+
+=head1 SYNOPSIS
+
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $pf = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $pf->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Free-BSD PF-Based devices
+
+=head1 LLDP Support
+
+LLDP Support is included but untested in this Device Class.  It is reported
+that the available CDP/LLDP modules for net-snmp don't work on FreeBSD (on
+which pfSense is based) as they assume certain Linux specific Ethernet
+structures.  This problem is apparently solved on PF based firewall appliances
+by using the ladvd package, for which a port may be found here:
+L<http://www.freshports.org/net/ladvd/>.  I'm not sure if this module ties into 
+Net-SNMP or not.
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::LLDP
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<FOKUS-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::LLDP/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $pf->vendor()
+
+    Returns 'FreeBSD'
+
+=item $pf->model()
+
+Grabs the os version from C<sysDescr>
+
+=item $pf->os()
+
+Returns 'Pf'
+
+=item $pf->os_ver()
+
+Tries to reference $pf->id() to one of the product MIBs listed above.
+Will probably return a truncation of the default OID for pf-based systems 
+C<enterprises.12325.1.1.2.1.1>.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::LLDP
+
+See documentation in L<SNMP::Info::LLDP/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/SonicWALL.pm

@@ -0,0 +1,189 @@
+package SNMP::Info::Layer3::SonicWALL;
+
+# Copyright (c) 2011 Netdisco Project
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::SonicWALL::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::SonicWALL::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer2::MIBS, %SNMP::Info::Layer3::MIBS,
+    'SNWL-COMMON-MIB' => 'snwlCommonModule',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer2::GLOBALS, %SNMP::Info::Layer3::GLOBALS,
+    #From SNWL-COMMON-MIB
+    'sw_model' => 'snwlSysModel',
+    'sw_serial' => 'snwlSysSerialNumber',
+    'sw_firmware' => 'snwlSysFirmwareVersion',
+);
+
+%FUNCS = ( %SNMP::Info::Layer2::FUNCS, %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer2::MUNGE, %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'SonicWALL';
+}
+
+sub os {
+        my $sonicos = shift;
+        my $swos = $sonicos->sw_firmware();
+        if ($swos =~ /Enhanced/) {
+            return 'SonicOS Enhanced';
+        }
+        return 'SonicOS Standard';
+}
+
+sub os_ver {
+    my $sonicosver = shift;
+        my $osver = $sonicosver->sw_firmware();
+        if ( $osver =~ /\S+\s\S+\s(\S+)/) {
+            return $1
+        }
+}
+
+sub serial {
+        my $sw = shift;
+        my $serial = $sw->sw_serial();
+        return $serial;
+}
+
+sub model {
+        my $swmodel = shift;
+        my $model = $swmodel->sw_model();
+        return $model;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::SonicWALL - SNMP Interface to L3 SonicWALL Firewall
+
+=head1 AUTHOR
+
+phishphreek@gmail.com
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you.
+ my $router = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        )
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $router->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Generic SonicWALL Firewalls
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=head2 Overrides
+
+=over
+
+=item $router->vendor()
+
+Returns C<'SonicWALL'>
+
+=item $router->os()
+
+Returns C<'SonicOS'>
+
+=item $router->os_ver()
+
+Returns '4.2.0.0-10e'
+
+=item $router->model()
+
+Returns C<'PRO 3060 Enhanced'>
+
+=item $router->serial()
+
+Returns the MAC address of the first X0/LAN interface.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut
+

Info/Layer3/Sun.pm

@@ -0,0 +1,204 @@
+# SNMP::Info::Layer3::Sun
+# $Id$
+#
+# Copyright (c) 2008 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Sun;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Sun::ISA       = qw/SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Sun::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( %SNMP::Info::Layer3::MIBS, );
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    'sun_hostid' => '.1.3.6.1.4.1.42.3.1.2.0',
+    'motd'       => '.1.3.6.1.4.1.42.3.1.3.0',
+);
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub vendor {
+    return 'sun';
+}
+
+sub os {
+    return 'sun';
+}
+
+sub os_ver {
+    my $sun   = shift;
+    my $descr = $sun->motd();
+    return unless defined $descr;
+
+    if ( $descr =~ m/SunOS (\S+)/ ) {
+        return $1;
+    }
+    return;
+}
+
+sub model {
+    return 'Solaris Router';
+}
+
+sub serial {
+    my $sun = shift;
+    my $serial = unpack( "H*", $sun->sun_hostid() );
+    return $serial;
+}
+
+sub i_ignore {
+    my $l3      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l3->interfaces($partial) || {};
+
+    my %i_ignore;
+    foreach my $if ( keys %$interfaces ) {
+
+        # lo0
+        if ( $interfaces->{$if} =~ /\blo0\b/i ) {
+            $i_ignore{$if}++;
+        }
+    }
+    return \%i_ignore;
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Sun - SNMP Interface to L3 Sun Solaris
+
+=head1 AUTHOR
+
+begemot
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $sun = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'mysunrouter',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $sun->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Generic Sun Routers running SunOS
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $sun->vendor()
+
+Returns 'sun'
+
+=item $sun->os()
+
+Returns 'sun'
+
+=item $sun->os_ver()
+
+Returns the software version extracted from message of the day.
+
+=item $sun->model()
+
+Returns 'Solaris Router'
+
+=item $sun->serial()
+
+Returns serial number
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $sun->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Tasman.pm

@@ -0,0 +1,298 @@
+# SNMP::Info::Layer3::Tasman
+#
+# Copyright (c) 2012 Eric Miller
+# All Rights Reserved
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Tasman;
+
+use strict;
+use Exporter;
+
+use SNMP::Info::Layer3;
+use SNMP::Info::MAU;
+
+@SNMP::Info::Layer3::Tasman::ISA = qw/SNMP::Info::MAU
+    SNMP::Info::Layer3 Exporter/;
+@SNMP::Info::Layer3::Tasman::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer3::MIBS,
+    %SNMP::Info::MAU::MIBS,
+    'NT-ENTERPRISE-DATA-MIB' => 'ntEnterpriseRouters',
+    'SYSTEM-MIB'             => 'nnsysVersion',
+    'CHASSIS-MIB'            => 'nnchassisModel',
+    'ENVIRONMENT-MIB'        => 'nnenvPwrsupStatus',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer3::GLOBALS,
+    %SNMP::Info::MAU::GLOBALS,
+    'ps1_type'      => 'nnenvPwrsupType.1',
+    'ps1_status'    => 'nnenvPwrsupStatus.1',
+    'ps2_type'      => 'nnenvPwrsupType.2',
+    'ps2_status'    => 'nnenvPwrsupStatus.2',
+    'nn_sys_ver'    => 'nnsysVersion',
+    'nn_ch_model'   => 'nnchassisModel',
+    'nn_ch_op_stat' => 'nnchassisOperStatus',
+    'nn_ch_serial'  => 'nnchassisSerialNumber',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer3::FUNCS,
+    %SNMP::Info::MAU::FUNCS,
+);
+
+%MUNGE = (
+    %SNMP::Info::Layer3::MUNGE,
+    %SNMP::Info::MAU::MUNGE,
+);
+
+# use MAU-MIB for admin. duplex and admin. speed
+*SNMP::Info::Layer3::Tasman::i_duplex_admin
+    = \&SNMP::Info::MAU::mau_i_duplex_admin;
+*SNMP::Info::Layer3::Tasman::i_speed_admin
+    = \&SNMP::Info::MAU::mau_i_speed_admin;
+
+sub vendor {
+    return 'avaya';
+}
+
+sub os {
+    return 'tasman';
+}
+
+sub os_ver {
+    my $tasman  = shift;
+    my $version = $tasman->nn_sys_ver() || "";
+    my $descr   = $tasman->description()  || "";
+
+    # Newer versions
+    return $1 if ( $version =~ /^SW:\s+(.+?)\s+/ );
+    # Older versions
+    return $1 if ( $descr =~ /Software Version\s+=\s+[r]*(.+),/);
+    # Can't find
+    return;
+}
+
+sub model {
+    my $tasman = shift;
+
+    my $id        = $tasman->id();
+    my $ch_model = $tasman->nn_ch_model();
+    
+    return $ch_model if $ch_model;
+
+    my $model = &SNMP::translateObj($id);
+    return $id unless defined $model;
+
+    $model =~ s/^ntSecureRouter/SR/;
+    return $model;
+}
+
+sub serial {
+    my $tasman = shift;
+
+    # Newer versions of the software redefined the MIB in a non-backwards
+    # compatible manner.  Try the old OID first.
+    my $serial = $tasman->nn_ch_op_stat();
+    # Newer versions populate status, serial should contain some numbers
+    return $serial if ($serial !~ /^\D+$/);
+
+    # Unfortunately newer versions don't seem to populate the newer OID.
+    return $tasman->nn_ch_serial();
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Tasman - SNMP Interface to Avaya Secure Routers
+
+=head1 AUTHOR
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $tasman = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $tasman->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Avaya Secure Routers
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=item SNMP::Info::MAU
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<NT-ENTERPRISE-DATA-MIB>
+
+=item F<SYSTEM-MIB>
+
+=item F<CHASSIS-MIB>
+
+=item F<ENVIRONMENT-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+See L<SNMP::Info::MAU/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar values from SNMP
+
+=over
+
+=item $tasman->vendor()
+
+Returns C<'avaya'>
+
+=item $tasman->model()
+
+Tries to get the model from C<nnchassisModel> and if not available 
+cross references $tasman->id() to F<NT-ENTERPRISE-DATA-MIB>.
+
+Substitutes 'SR' for C<'ntSecureRouter'> in the name for readability.
+
+=item $tasman->os()
+
+Returns C<'tasman'>
+
+=item $tasman->os_ver()
+
+Grabs the os version from C<nnsysVersion>
+
+=item $tasman->ps1_type()
+
+(C<nnenvPwrsupType.1>)
+
+=item $tasman->ps1_status()
+
+(C<nnenvPwrsupStatus.1>)
+
+=item $tasman->ps2_type()
+
+(C<nnenvPwrsupType.2>)
+
+=item $tasman->ps2_status()
+ 
+(C<nnenvPwrsupStatus.2>)
+
+=item $tasman->nn_sys_ver()
+
+(C<nnsysVersion.0>)
+
+=item $tasman->nn_ch_model()
+
+(C<nnchassisModel.0>)
+
+=item $tasman->nn_ch_op_stat()
+
+(C<nnchassisOperStatus.0>)
+
+=item $tasman->nn_ch_serial()
+
+(C<nnchassisSerialNumber.0>)
+
+=item $tasman->serial()
+
+Tries both (C<nnchassisOperStatus>) and (C<nnchassisSerialNumber>) as oid
+was redefined between versions.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head2 Global Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over 4
+
+=item $stack->i_duplex_admin()
+
+Returns reference to hash of iid to administrative duplex setting.
+
+First checks for fixed gigabit ports which are always full duplex. Next checks
+the port administrative speed (C<portAdminSpeed>) which if set to
+autonegotiate then the duplex will also autonegotiate, otherwise it uses the
+reported port duplex (C<portDuplex>).
+
+=item $stack->i_speed_admin()
+
+Returns reference to hash of iid to administrative speed setting.
+
+C<portAdminSpeed>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=head2 Table Methods imported from SNMP::Info::MAU
+
+See documentation in L<SNMP::Info::MAU/"TABLE METHODS"> for details.
+
+=cut

Info/Layer3/Timetra.pm

@@ -0,0 +1,194 @@
+# SNMP::Info::Layer3::Timetra
+# $Id$
+#
+# Copyright (c) 2008 Bill Fenner
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer3::Timetra;
+
+use strict;
+
+use Exporter;
+use SNMP::Info::Layer3;
+
+@SNMP::Info::Layer3::Timetra::ISA = qw/SNMP::Info::Layer3
+    Exporter/;
+@SNMP::Info::Layer3::Timetra::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = ( %SNMP::Info::Layer3::MIBS, 'TIMETRA-GLOBAL-MIB' => 'timetraReg', );
+
+%GLOBALS = ( %SNMP::Info::Layer3::GLOBALS, );
+
+%FUNCS = ( %SNMP::Info::Layer3::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer3::MUNGE, );
+
+sub model {
+    my $timetra = shift;
+    my $id      = $timetra->id();
+    my $model   = &SNMP::translateObj($id);
+
+    return $id unless defined $model;
+
+    $model =~ s/^tmnxModel//;
+
+    return $model;
+}
+
+sub os {
+    return 'TiMOS';
+}
+
+sub vendor {
+    return 'alcatel-lucent';
+}
+
+sub os_ver {
+    my $timetra = shift;
+
+    my $descr = $timetra->description();
+    if ( $descr =~ m/^TiMOS-(\S+)/ ) {
+        return $1;
+    }
+
+    # No clue what this will try but hey
+    return $timetra->SUPER::os_ver();
+}
+
+# The interface description contains the SFP type, so
+# to avoid losing historical information through a configuration change
+# we use interface name instead.
+sub interfaces {
+    my $alu     = shift;
+    my $partial = shift;
+
+    return $alu->orig_i_name($partial);
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer3::Timetra - SNMP Interface to Alcatel-Lucent SR
+
+=head1 AUTHOR
+
+Bill Fenner
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $alu = new SNMP::Info(
+                        AutoSpecify => 1,
+                        Debug       => 1,
+                        # These arguments are passed directly to SNMP::Session
+                        DestHost    => 'myswitch',
+                        Community   => 'public',
+                        Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $alu->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Alcatel-Lucent Service Routers
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer3
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<TIMETRA-GLOBAL-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer3/"Required MIBs"> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $alu->vendor()
+
+Returns 'alcatel-lucent'
+
+=item $alu->os()
+
+Returns 'TiMOS'
+
+=item $alu->os_ver()
+
+Grabs the version string from C<sysDescr>.
+
+=item $alu->model()
+
+Tries to reference $alu->id() to one of the product MIBs listed above
+
+Removes 'tmnxModel' from the name for readability.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $alu->interfaces()
+
+Returns C<ifName>, since the default Layer3 C<ifDescr> varies based
+upon the transceiver inserted.
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer3
+
+See documentation in L<SNMP::Info::Layer3/"TABLE METHODS"> for details.
+
+=cut

Info/Layer7.pm

@@ -0,0 +1,244 @@
+# SNMP::Info::Layer7 - SNMP Interface to Layer7 Devices
+#
+# Copyright (c) 2011 Jeroen van Ingen
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer7;
+
+use strict;
+use Exporter;
+use SNMP::Info;
+
+@SNMP::Info::Layer7::ISA       = qw/SNMP::Info Exporter/;
+@SNMP::Info::Layer7::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::MIBS,
+);
+
+%GLOBALS = (
+    %SNMP::Info::GLOBALS,
+);
+
+%FUNCS = (
+    %SNMP::Info::FUNCS,
+);
+
+%MUNGE = (
+    # Inherit all the built in munging
+    %SNMP::Info::MUNGE,
+);
+
+
+# $l7->model() - Looks at sysObjectID which gives the oid of the system
+#       name, contained in a proprietary  MIB.
+sub model {
+    my $l7    = shift;
+    my $id    = $l7->id();
+    my $model = &SNMP::translateObj($id);
+
+    # Neoteris (Juniper IVE)    
+    $model =~ s/^ive//i;
+
+    return $model;
+}
+
+sub vendor {
+    my $l7    = shift;
+    my $id    = $l7->id();
+    my $vendor = 'unknown';
+    if ( defined($id) && $id =~ /^(\.1\.3\.6\.1\.4\.1\.\d+)/ ) {
+        my $enterprise = &SNMP::translateObj($1);
+        $vendor = $enterprise if defined $enterprise;
+    }
+    return $vendor;
+}
+
+# By Default we'll use the description field
+sub interfaces {
+    my $l7      = shift;
+    my $partial = shift;
+
+    my $interfaces = $l7->i_index($partial)       || {};
+    my $i_descr    = $l7->i_description($partial) || {};
+
+    # Replace the Index with the ifDescr field.
+    foreach my $iid ( keys %$i_descr ) {
+        my $port = $i_descr->{$iid};
+        next unless defined $port;
+        $interfaces->{$iid} = $port;
+    }
+    return $interfaces;
+}
+
+sub i_ignore {
+    my $l7      = shift;
+    my $partial = shift;
+
+    my $i_type = $l7->i_type($partial) || {};
+
+    my %i_ignore = ();
+
+    foreach my $if ( keys %$i_type ) {
+        my $type = $i_type->{$if};
+        $i_ignore{$if}++
+            if $type =~ /(loopback|other|cpu)/i;
+    }
+
+    return \%i_ignore;
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer7 - SNMP Interface to network devices serving Layer7 only.
+
+=head1 AUTHOR
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $l7 = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 1
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class = $l7->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+ # Let's get some basic Port information
+ my $interfaces = $l7->interfaces();
+ my $i_up       = $l7->i_up();
+ my $i_speed    = $l7->i_speed();
+
+ foreach my $iid (keys %$interfaces) {
+    my $port  = $interfaces->{$iid};
+    my $up    = $i_up->{$iid};
+    my $speed = $i_speed->{$iid}
+    print "Port $port is $up. Port runs at $speed.\n";
+ }
+
+=head1 DESCRIPTION
+
+This class is usually used as a superclass for more specific device classes
+listed under SNMP::Info::Layer7::*   Please read all docs under SNMP::Info
+first.
+
+Provides abstraction to the configuration information obtainable from a 
+Layer7 device through SNMP.  Information is stored in a number of MIBs.
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $l7 = new SNMP::Info::Layer7(...);
+
+=head2 Inherited Classes 
+
+=over
+
+=item SNMP::Info
+
+=back
+
+=head2 Required MIBs 
+
+=over
+
+=item None
+
+=back
+
+MIBs required for L<SNMP::Info/"Required MIBs">
+
+See L<SNMP::Info/"Required MIBs"> for its MIB requirements.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=back
+
+=head2 Overrides
+
+=over
+
+=item $l7->model()
+
+Cross references $l7->id() with product IDs.
+
+=item $l7->vendor()
+
+Tries to discover the vendor by looking up the enterprise number in
+C<sysObjectID>.
+
+=back
+
+=head2 Global Methods imported from SNMP::Info
+
+See documentation in L<SNMP::Info/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=item $l7->interfaces()
+
+Returns reference to the map between IID and physical Port.
+
+=item $l7->i_ignore()
+
+Returns reference to hash.  Increments value of IID if port is to be ignored.
+
+Ignores loopback, other, and cpu
+
+=back
+
+=head2 Table Methods imported from SNMP::Info
+
+See documentation in L<SNMP::Info/"TABLE METHODS"> for details.
+
+=cut

Info/Layer7/APC.pm

@@ -0,0 +1,237 @@
+# SNMP::Info::Layer7::APC - SNMP Interface to APC UPS devices
+#
+# Copyright (c) 2011 Jeroen van Ingen
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer7::APC;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer7;
+
+@SNMP::Info::Layer7::APC::ISA
+    = qw/SNMP::Info::Layer7 Exporter/;
+@SNMP::Info::Layer7::APC::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer7::MIBS,
+    'PowerNet-MIB' => 'upsBasicIdentModel',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer7::GLOBALS,
+    'ups_serial'   => 'upsAdvIdentSerialNumber.0',
+    'mgmt_serial'  => 'experimental.2.4.1.2.1',
+    'os_ver'       => 'experimental.2.4.1.4.1',
+    'os_bin'       => 'experimental.2.4.1.4.2',
+    'ups_model'    => 'upsBasicIdentModel.0',
+    'ps1_status'   => 'upsBasicOutputStatus.0',
+    'ps2_status'   => 'upsBasicBatteryStatus.0',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer7::FUNCS,
+    
+);
+
+%MUNGE = (
+    # Inherit all the built in munging
+    %SNMP::Info::Layer7::MUNGE,
+);
+
+
+# Method Overrides
+
+sub os {
+    return 'aos';
+}
+
+sub vendor {
+    return 'apc';
+}
+
+sub model {
+    my $apc = shift;
+    return $apc->ups_model();
+}
+
+sub serial {
+    my $apc = shift;
+    my $ups = $apc->ups_serial() || 'unknown';
+    my $mgmt = $apc->mgmt_serial() || 'unknown';
+    return sprintf("UPS: %s, management card: %s", $ups, $mgmt);
+}
+
+sub ps1_type {
+    return 'UPS status';
+}
+
+sub ps2_type {
+    return 'Battery status';
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer7::APC - SNMP Interface to APC UPS devices
+
+=head1 AUTHOR
+
+Jeroen van Ingen
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $apc = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myswitch',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $apc->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Provides abstraction to the configuration information obtainable from a 
+APC UPS via SNMP. 
+
+For speed or debugging purposes you can call the subclass directly, but not
+after determining a more specific class using the method above. 
+
+ my $apc = new SNMP::Info::Layer7::APC(...);
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer7
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<POWERNET-MIB>
+
+=back
+
+All required MIBs can be found in the netdisco-mibs package.
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $apc->os()
+
+Returns C<'aos'>
+
+=item $apc->os_bin()
+
+C<POWERNET-MIB::experimental.2.4.1.4.2>
+
+=item $apc->os_ver()
+
+C<POWERNET-MIB::experimental.2.4.1.4.1>
+
+=item $apc->serial()
+
+Combines the UPS serial C<upsAdvIdentSerialNumber.0> with the management
+card serial C<POWERNET-MIB::experimental.2.4.1.2.1> into a pretty string.
+
+=item $apc->vendor()
+
+Returns C<'apc'>
+
+=item $apc->model()
+
+C<upsBasicIdentModel.0>
+
+=item $apc->ps1_type()
+
+Returns 'UPS status'
+
+=item $apc->ps1_status()
+
+Returns the main UPS status from C<upsBasicOutputStatus.0>
+
+=item $apc->ps2_type()
+
+Returns 'Battery status'
+
+=item $apc->ps2_status()
+
+Returns the battery status from C<upsBasicBatteryStatus.0>
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7/"GLOBALS"> for details.
+
+=head1 TABLE METHODS
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Overrides
+
+=over
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7/"TABLE METHODS"> for details.
+
+=head1 MUNGES
+
+=over
+
+=back
+
+=head1 SET METHODS
+
+These are methods that provide SNMP set functionality for overridden methods
+or provide a simpler interface to complex set operations.  See
+L<SNMP::Info/"SETTING DATA VIA SNMP"> for general information on set
+operations. 
+
+=cut

Info/Layer7/Neoteris.pm

@@ -0,0 +1,164 @@
+# SNMP::Info::Layer7::Neoteris
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer7::Neoteris;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer7;
+
+@SNMP::Info::Layer7::Neoteris::ISA       = qw/SNMP::Info::Layer7 Exporter/;
+@SNMP::Info::Layer7::Neoteris::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer7::MIBS,
+    'UCD-SNMP-MIB'       => 'versionTag',
+    'JUNIPER-IVE-MIB'    => 'productVersion',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer7::GLOBALS,
+    'os_ver' => 'productVersion',
+    'cpu'    => 'iveCpuUtil',
+);
+
+%FUNCS = ( %SNMP::Info::Layer7::FUNCS, );
+
+%MUNGE = ( %SNMP::Info::Layer7::MUNGE, );
+
+sub vendor {
+    return 'juniper';
+}
+
+sub os {
+    return 'ive';
+}
+
+sub serial {
+    return '';
+}
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer7::Neoteris - SNMP Interface to Juniper SSL VPN appliances
+
+=head1 AUTHORS
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $neoteris = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $neoteris->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Juniper SSL VPN appliances
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer7
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<UCD-SNMP-MIB>
+
+=item F<JUNIPER-IVE-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer7> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $neoteris->vendor()
+
+Returns 'juniper'.
+
+=item $neoteris->os()
+
+Returns C<'ive'>.
+
+=item $neoteris->os_ver()
+
+C<productVersion>
+
+=item $neoteris->cpu()
+
+C<iveCpuUtil>
+
+=item $neoteris->serial()
+
+Returns ''.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=head2 Table Methods imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=cut

Info/Layer7/Netscaler.pm

@@ -0,0 +1,215 @@
+# SNMP::Info::Layer7::Netscaler
+#
+# Copyright (c) 2012 Eric Miller
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#     * Redistributions of source code must retain the above copyright notice,
+#       this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
+#       derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+package SNMP::Info::Layer7::Netscaler;
+
+use strict;
+use Exporter;
+use SNMP::Info::Layer7;
+
+@SNMP::Info::Layer7::Netscaler::ISA       = qw/SNMP::Info::Layer7 Exporter/;
+@SNMP::Info::Layer7::Netscaler::EXPORT_OK = qw//;
+
+use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;
+
+$VERSION = '3.03';
+
+%MIBS = (
+    %SNMP::Info::Layer7::MIBS,
+    'NS-ROOT-MIB' => 'sysBuildVersion',
+);
+
+%GLOBALS = (
+    %SNMP::Info::Layer7::GLOBALS,
+    'build_ver'   => 'sysBuildVersion',
+    'sys_hw_desc' => 'sysHardwareVersionDesc',
+    'cpu'         => 'resCpuUsage',
+);
+
+%FUNCS = (
+    %SNMP::Info::Layer7::FUNCS,
+    # IP Address Table - NS-ROOT-MIB::nsIpAddrTable
+    'ip_index'    => 'ipAddr',
+    'ip_netmask'  => 'ipNetmask',
+    # TODO VLAN - NS-ROOT-MIB::vlanTable
+    'ns_vid'      =>'vlanId',
+    'ns_vlan_mem' => 'vlanMemberInterfaces',
+    'ns_vtag_int' => 'vlanTaggedInterfaces',
+    );
+
+%MUNGE = ( %SNMP::Info::Layer7::MUNGE, );
+
+sub vendor {
+    return 'citrix';
+}
+
+sub os {
+    return 'netscaler';
+}
+
+sub serial {
+    return '';
+}
+
+sub model {
+    my $ns    = shift;
+    my $desc  = $ns->sys_hw_desc() || '';
+   
+    $desc =~ s/^.+\bNS//i;
+
+    return $desc;
+}
+
+sub os_ver {
+    my $ns    = shift;
+    my $ver  = $ns->build_ver() || '';
+    
+    if ($ver =~ /^.+\bNS(\d+\.\d+)/) {
+        $ver = $1;
+    }
+    return $ver;
+}
+
+
+1;
+__END__
+
+=head1 NAME
+
+SNMP::Info::Layer7::Netscaler - SNMP Interface to Citrix Netscaler appliances
+
+=head1 AUTHORS
+
+Eric Miller
+
+=head1 SYNOPSIS
+
+ # Let SNMP::Info determine the correct subclass for you. 
+ my $ns = new SNMP::Info(
+                          AutoSpecify => 1,
+                          Debug       => 1,
+                          DestHost    => 'myrouter',
+                          Community   => 'public',
+                          Version     => 2
+                        ) 
+    or die "Can't connect to DestHost.\n";
+
+ my $class      = $ns->class();
+ print "SNMP::Info determined this device to fall under subclass : $class\n";
+
+=head1 DESCRIPTION
+
+Subclass for Citrix Netscaler appliances
+
+=head2 Inherited Classes
+
+=over
+
+=item SNMP::Info::Layer7
+
+=back
+
+=head2 Required MIBs
+
+=over
+
+=item F<NS-ROOT-MIB>
+
+=item Inherited Classes' MIBs
+
+See L<SNMP::Info::Layer7> for its own MIB requirements.
+
+=back
+
+=head1 GLOBALS
+
+These are methods that return scalar value from SNMP
+
+=over
+
+=item $ns->vendor()
+
+Returns 'citrix'.
+
+=item $ns->os()
+
+Returns 'netscaler'.
+
+=item $ns->os_ver()
+
+Release extracted from C<sysBuildVersion>.
+
+=item $ns->model()
+
+Model extracted from C<sysHardwareVersionDesc>.
+
+=item $ns->cpu()
+
+C<resCpuUsage>
+
+=item $ns->build_ver()
+
+C<sysBuildVersion>
+
+=item $ns->sys_hw_desc()
+
+C<sysHardwareVersionDesc>
+
+=item $ns->serial()
+
+Returns ''.
+
+=back
+
+=head2 Globals imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=head1 TABLE ENTRIES
+
+These are methods that return tables of information in the form of a reference
+to a hash.
+
+=over
+
+=item $ns->ip_index()
+
+C<ipAddr>
+
+=item $ns->ip_netmask()
+
+C<ipNetmask>
+
+=back
+
+=head2 Table Methods imported from SNMP::Info::Layer7
+
+See documentation in L<SNMP::Info::Layer7> for details.
+
+=cut

Info/MAU.pm

@@ -1,121 +1,286 @@
-# SNMP::Info::MAU - Media Access Unit - RFC2668
-# Max Baker <max@warped.org>
+# SNMP::Info::MAU - Media Access Unit - RFC 2668
+# $Id$
 #
-# Copyright (c) 2004 Max Baker changes from version 0.8 and beyond.
+# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
 #
 # Copyright (c) 2002,2003 Regents of the University of California
 # All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without 
+#
+# Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
-# 
+#
 #     * Redistributions of source code must retain the above copyright notice,
 #       this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright notice,
-#       this list of conditions and the following disclaimer in the documentation
-#       and/or other materials provided with the distribution.
-#     * Neither the name of the University of California, Santa Cruz nor the 
-#       names of its contributors may be used to endorse or promote products 
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of the University of California, Santa Cruz nor the
+#       names of its contributors may be used to endorse or promote products
 #       derived from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
 
 package SNMP::Info::MAU;
-$VERSION = 0.9;
-# $Id$
 
 use strict;
-
 use Exporter;
 use SNMP::Info;
 
-use vars qw/$VERSION $DEBUG %MIBS %FUNCS %GLOBALS %MUNGE $INIT/;
-@SNMP::Info::MAU::ISA = qw/SNMP::Info Exporter/;
+@SNMP::Info::MAU::ISA       = qw/SNMP::Info Exporter/;
 @SNMP::Info::MAU::EXPORT_OK = qw//;
 
-$DEBUG=0;
-$SNMP::debugging=$DEBUG;
+use vars qw/$VERSION %MIBS %FUNCS %GLOBALS %MUNGE/;
 
-$INIT = 0;
+$VERSION = '3.03';
 
-%MIBS = ('MAU-MIB' => 'mauMod');
+%MIBS = ( 'MAU-MIB' => 'mauMod' );
 
-%GLOBALS = (
-           );
+%GLOBALS = ();
 
 %FUNCS = (
-          # Interface MAU Table
-          'mau_index'    => 'ifMauIfIndex',
-          'mau_link'     => 'ifMauType',
-          'mau_status'   => 'ifMauStatus',
-          'mau_up'       => 'ifMauMediaAvailable',
-          'mau_type'     => 'ifMauTypeList',
-          'mau_type_admin'     => 'ifMauDefaultType',
-          # Interface Auto-Negotiation Table
-          'mau_auto'     => 'ifMauAutoNegSupported',
-          'mau_autostat' => 'ifMauAutoNegAdminStatus',
-          'mau_autosent' => 'ifMauAutoNegCapAdvertised',
-          'mau_autorec'  => 'ifMauAutoNegCapReceived',
-          );
+
+    # Interface MAU Table
+    'mau_index'      => 'ifMauIfIndex',
+    'mau_link'       => 'ifMauType',
+    'mau_status'     => 'ifMauStatus',
+    'mau_up'         => 'ifMauMediaAvailable',
+    'mau_type'       => 'ifMauTypeList',
+    'mau_type_admin' => 'ifMauDefaultType',
+
+    # Interface Auto-Negotiation Table
+    'mau_auto'     => 'ifMauAutoNegSupported',
+    'mau_autostat' => 'ifMauAutoNegAdminStatus',
+    'mau_autosent' => 'ifMauAutoNegCapAdvertised',
+    'mau_autorec'  => 'ifMauAutoNegCapReceived',
+);
 
 %MUNGE = (
-          # Inherit all the built in munging
-          %SNMP::Info::MUNGE,
-          # Add ones for our class
-          'mau_type' => \&munge_int2bin,
-          'mau_autosent' => \&munge_int2bin,
-          'mau_autorec' => \&munge_int2bin,
-         );
 
+    # Inherit all the built in munging
+    %SNMP::Info::MUNGE,
+
+    # Add ones for our class
+    'mau_type'     => \&munge_int2bin,
+    'mau_autosent' => \&munge_int2bin,
+    'mau_autorec'  => \&munge_int2bin,
+);
 
 sub munge_int2bin {
     my $int = shift;
-    return undef unless defined $int;
-    return unpack("B32", pack("N", $int));
+    return unless defined $int;
+    return unpack( "B32", pack( "N", $int ) );
 }
 
-sub _isfullduplex{
-    my $mau = shift;
+sub _isfullduplex {
+    my $mau     = shift;
     my $mautype = shift;
 
     my @full_types = qw/11 13 16 18 20/;
-    foreach my $type ( @full_types ) {
-        return 1 if (substr($mautype,32-$type,1) eq '1')
+    foreach my $type (@full_types) {
+        return 1 if ( substr( $mautype, 32 - $type, 1 ) eq '1' );
     }
     return 0;
 }
 
-sub _ishalfduplex{
-    my $mau = shift;
+sub _ishalfduplex {
+    my $mau     = shift;
     my $mautype = shift;
 
     my @half_types = qw/10 12 15 17 19/;
-    foreach my $type ( @half_types ) {
-        return 1 if (substr($mautype,32-$type,1) eq '1')
+    foreach my $type (@half_types) {
+        return 1 if ( substr( $mautype, 32 - $type, 1 ) eq '1' );
     }
     return 0;
 }
 
+my %_mau_i_speed_map = (
+    '10'    => '10 Mbps',
+    '100'   => '100 Mbps',
+    '1000'  => '1.0 Gbps',
+    '10Gig' => '10 Gbps',
+);
+
+sub mau_i_speed_admin {
+    my $mau = shift;
+
+    my $mau_index      = $mau->mau_index();
+    my $mau_type_admin = $mau->mau_type_admin();
+
+    my %i_speed_admin;
+    foreach my $mau_port ( keys %$mau_type_admin ) {
+        my $iid = $mau_index->{$mau_port};
+        next unless defined $iid;
+
+        my $type_adminoid = $mau_type_admin->{$mau_port};
+        my $type_admin    = &SNMP::translateObj($type_adminoid);
+        next unless defined $type_admin;
+
+        if ( $type_adminoid eq '.0.0' ) {
+            $i_speed_admin{$iid} = 'auto';
+        }
+        elsif ($type_admin =~ /^dot3MauType(.*)Base/
+            && $_mau_i_speed_map{$1} )
+        {
+            $i_speed_admin{$iid} = $_mau_i_speed_map{$1};
+        }
+    }
+    return \%i_speed_admin;
+}
+
+sub mau_i_duplex {
+    my $mau = shift;
+
+    my $mau_index = $mau->mau_index();
+    my $mau_link  = $mau->mau_link();
+
+    my %i_duplex;
+    foreach my $mau_port ( keys %$mau_link ) {
+        my $iid = $mau_index->{$mau_port};
+        next unless defined $iid;
+
+        my $linkoid = $mau_link->{$mau_port};
+        my $link    = &SNMP::translateObj($linkoid);
+        next unless defined $link;
+
+        my $duplex = undef;
+
+        if ( $link =~ /fd$/i ) {
+            $duplex = 'full';
+        }
+        elsif ( $link =~ /hd$/i ) {
+            $duplex = 'half';
+        }
+
+        $i_duplex{$iid} = $duplex if defined $duplex;
+    }
+    return \%i_duplex;
+}
+
+sub mau_i_duplex_admin {
+    my $mau     = shift;
+    my $partial = shift;
+
+    my $mau_index = $mau->mau_index() || {};
+
+    if ($partial) {
+        my %rev_mau_index = reverse %$mau_index;
+        $partial = $rev_mau_index{$partial};
+    }
+
+    my $mau_autostat   = $mau->mau_autostat($partial)   || {};
+    my $mau_type_admin = $mau->mau_type_admin($partial) || {};
+
+    # Older HP4000's don't implement ifMauDefaultType, but we can
+    # figure out from ifMauAutoNegCapAdvertised what we'd like.
+    if ( !defined($mau_type_admin) ) {
+        if ( defined($mau_index) ) {
+            return mau_i_duplex_admin_old( $mau, $mau_index, $mau_autostat );
+        }
+        else {
+            return;
+        }
+    }
+
+    my %i_duplex_admin;
+    foreach my $mau_port ( keys %$mau_type_admin ) {
+        my $iid = $mau_index->{$mau_port};
+        next unless defined $iid;
+
+        my $autostat = $mau_autostat->{$mau_port};
+        if ( defined $autostat and $autostat =~ /enabled/i ) {
+            $i_duplex_admin{$iid} = 'auto';
+            next;
+        }
+
+        my $type_adminoid = $mau_type_admin->{$mau_port};
+        my $type_admin    = &SNMP::translateObj($type_adminoid);
+        next unless defined $type_admin;
+
+        my $duplex = undef;
+
+        if ( $type_admin =~ /fd$/i ) {
+            $duplex = 'full';
+        }
+        elsif ( $type_admin =~ /hd$/i ) {
+            $duplex = 'half';
+        }
+        elsif ( $type_admin eq 'zeroDotZero' ) {
+            $duplex = 'auto';
+        }
+
+        $i_duplex_admin{$iid} = $duplex if defined $duplex;
+    }
+    return \%i_duplex_admin;
+}
+
+sub mau_i_duplex_admin_old {
+    my $mau          = shift;
+    my $mau_index    = shift;
+    my $mau_autostat = shift;
+
+    my $interfaces   = $mau->interfaces();
+    my $mau_autosent = $mau->mau_autosent();
+
+    my %mau_reverse = reverse %$mau_index;
+
+    my %i_duplex_admin;
+    foreach my $iid ( keys %$interfaces ) {
+        my $mau_index = $mau_reverse{$iid};
+        next unless defined $mau_index;
+
+        my $autostat = $mau_autostat->{$mau_index};
+
+        # HP25xx has this value
+        if ( defined $autostat and $autostat =~ /enabled/i ) {
+            $i_duplex_admin{$iid} = 'auto';
+            next;
+        }
+
+        my $type = $mau_autosent->{$mau_index};
+
+        next unless defined $type;
+
+        if ( $type == 0 ) {
+            $i_duplex_admin{$iid} = 'none';
+            next;
+        }
+
+        my $full = $mau->_isfullduplex($type);
+        my $half = $mau->_ishalfduplex($type);
+
+        if ( $full and !$half ) {
+            $i_duplex_admin{$iid} = 'full';
+        }
+        elsif ($half) {
+            $i_duplex_admin{$iid} = 'half';
+        }
+    }
+
+    return \%i_duplex_admin;
+}
+
 1;
 __END__
 
 
 =head1 NAME
 
-SNMP::Info::MAU - Perl5 Interface to Medium Access Unit (MAU) MIB (RFC2668) via SNMP
+SNMP::Info::MAU - SNMP Interface to Medium Access Unit (MAU) MIB (RFC 2668)
+via SNMP
 
 =head1 AUTHOR
 
-Max Baker (C<max@warped.org>)
+Max Baker
 
 =head1 SYNOPSIS
 
@@ -132,14 +297,15 @@ Max Baker (C<max@warped.org>)
 
 =head1 DESCRIPTION
 
-SNMP::Info::MAU is a sublcass of SNMP::Info that supplies access to the
-MAU-MIB (RFC2668). This MIB is sometimes implemented on Layer 2 network devices like HP Switches.
-MAU = Media Access Unit.
+SNMP::Info::MAU is a subclass of SNMP::Info that supplies access to the
+F<MAU-MIB> (RFC 2668). This MIB is sometimes implemented on Layer 2 network
+devices like HP Switches.  MAU = Media Access Unit.
 
 The MAU table contains link and duplex info for the port itself and the device
 connected to that port.
 
-Normally you use or create a subclass of SNMP::Info that inherits this one.  Do not use directly.
+Normally you use or create a subclass of SNMP::Info that inherits this one.
+Do not use directly.
 
 For debugging purposes call the class directly as you would SNMP::Info
 
@@ -153,7 +319,7 @@ None.
 
 =over
 
-=item MAU-MIB
+=item F<MAU-MIB>
 
 =back
 
@@ -172,21 +338,50 @@ These are methods that return scalar value from SNMP
 These are methods that return tables of information in the form of a reference
 to a hash.
 
-=head2 MAU INTERFACE TABLE ENTRIES
+
+=over
+
+=item $mau->mau_i_duplex()
+
+Parses mau_index and mau_link to return the duplex information for
+interfaces.
+
+=item $mau->mau_i_duplex_admin()
+
+Parses C<mac_index>,C<mau_autostat>,C<mau_type_admin> in
+order to find the admin duplex setting for all the interfaces.
+
+Returns either (auto,full,half).
+
+=item $mau->mau_i_duplex_admin_old()
+
+Called by mau_i_duplex_admin() if C<mau_type_admin> is empty.
+Parses C<mau_index>,C<mau_autostat>,C<mau_autosent> in
+order to find the admin duplex setting for all the interfaces.
+
+Returns either (auto,none,full,half).
+
+=item $mau->mau_i_speed_admin()
+
+Returns admin speed setting for all the interfaces.
+
+=back
+
+=head2 MAU INTERFACE TABLE METHODS
 
 =over
 
 =item $mau->mau_index() -  Returns a list of interfaces
 and their index in the MAU IF Table.
 
-(B<ifMauIfIndex>)
+(C<ifMauIfIndex>)
 
 =item $mau->mau_link() - Returns the type of Media Access used.  
 
     This is essentially the type of link in use.  
     eg. dot3MauType100BaseTXFD - 100BaseT at Full Duplex
 
-(B<ifMauType>)
+(C<ifMauType>)
 
 =item $mau->mau_status() - Returns the admin link condition as 
 
@@ -199,16 +394,16 @@ and their index in the MAU IF Table.
 
 Use 5 and !5 to see if the link is up or down on the admin side.
 
-(B<ifMauStatus>)
+(C<ifMauStatus>)
 
 =item $mau->mau_up() -  Returns the current link condition
 
- (B<ifMauMediaAvailable>)
+ (C<ifMauMediaAvailable>)
 
 =item $mau->mau_type() - Returns a 32bit string reporting the capabilities
 of the port from a MAU POV. 
 
-  Directly from the MAU-MIB : 
+  Directly from F<MAU-MIB> : 
           Bit   Capability
             0      other or unknown
             1      AUI
@@ -232,26 +427,33 @@ of the port from a MAU POV.
            19      100BASE-T2 half duplex mode
            20      100BASE-T2 full duplex mode
 
-(B<ifMauTypeList>)
+(C<ifMauTypeList>)
+
+=item $mau->mau_type_admin()
+
+(C<ifMauDefaultType>)
 
 =item $mau->mau_auto() - Returns status of auto-negotiation mode for ports.
 
-(B<ifMauAutoNegAdminStatus>)
+(C<ifMauAutoNegAdminStatus>)
+
+=item $mau->mau_autostat()
+
+(C<ifMauAutoNegAdminStatus>)
 
 =item $mau->mau_autosent() - Returns a 32 bit bit-string representing the
 capabilities we are broadcasting on that port 
 
     Uses the same decoder as $mau->mau_type().
 
-(B<ifMauAutoNegCapAdvertised>)
-
+(C<ifMauAutoNegCapAdvertised>)
 
 =item $mau->mau_autorec() - Returns a 32 bit bit-string representing the 
 capabilities of the device on the other end. 
 
     Uses the same decoder as $mau->mau_type().
 
-(B<ifMauAutoNegCapReceived>)
+(C<ifMauAutoNegCapReceived>)
 
 =back
 
@@ -263,13 +465,13 @@ capabilities of the device on the other end.
 
 =item $mau->_isfullduplex(bitstring)
 
-    Boolean. Checks to see if any of the full_duplex types from mau_type() are
-    high.  Currently bits 11,13,16,18,20.
+    Boolean. Checks to see if any of the full_duplex types from mau_type()
+    are     high.  Currently bits 11,13,16,18,20.
 
 =item $mau->_ishalfduplex(bitstring)
     
-    Boolean.  Checks to see if any of the half_duplex types from mau_type() are
-    high.  Currently bits 10,12,15,17,19.
+    Boolean.  Checks to see if any of the half_duplex types from mau_type()
+    are high.  Currently bits 10,12,15,17,19.
 
 =back